MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-TELEPRESENCE-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1402 lines
49 KiB
Plaintext
Raw Blame History

-- CISCO-TELEPRESENCE-MIB.my: Cisco MIB to manage a
-- Telepresence System
--
-- Copyright (c) 2007-2010 by Cisco Systems Inc.
-- All rights reserved.
--
-- ******************************************************************
CISCO-TELEPRESENCE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
TruthValue,
TimeStamp
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InetAddress,
InetAddressType
FROM INET-ADDRESS-MIB
InterfaceIndexOrZero
FROM IF-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoTelepresenceMIB MODULE-IDENTITY
LAST-UPDATED "201007130000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cochan@cisco.com"
DESCRIPTION
"The MIB module defines the managed objects for a
Telepresence system.
Telepresence refers to a set of technologies which
allow a person to feel as if they were present, to give
the appearance that they were present, or to have an
effect, at a location other than their true location.
A complete Telepresence system includes one or more
Telepresence CODECS and peripherals such as display, camera,
speaker, microphone and presentation device.
Peripherals are attached directly to a Telepresence CODEC via
an interface. Some peripherals may have more than one
interface to transmit audio and/or video data and provide a
configuration and/or control access."
REVISION "201007130000Z"
DESCRIPTION
"Added ctpPeriStatusChangeNotifyEnable."
REVISION "200907120000Z"
DESCRIPTION
"Added ctpPeripheralDeviceCategory and ctpPeripheralDeviceNumber
in ctpPeripheralStatusEntry.
Added commError in CtpPeripheralStatusCode.
Updated the description of ctpPeripheralErrorHistoryTable."
REVISION "200802130000Z"
DESCRIPTION
"Added serial peripheral status and peripheral attribute table."
REVISION "200712110000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 643 }
-- Textual Conventions
CtpSystemResetMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention identifies the system reset mode.
noRestart (1) --
No operation.
restartPending (2) --
Restart a system without shutting down when there
is no active call; otherwise, system will be
restarted after the call is terminated.
resetPending (3) --
Shut down a system and bring it back up if there
is no active call; otherwise, system will be reset
after the call is terminated.
forceReset (4) --
Shut down a system and bring it back up no matter
if there is an active call or not."
SYNTAX INTEGER {
noRestart(1), -- the following three values are
-- states: these values may be
-- read or written
restartPending(2),
resetPending(3),
forceReset(4) -- the following value is action:
-- it may be written but not read
}
CtpPeripheralCableCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The textual convention identifies cable status of the attached
peripheral through HDMI.
plugged (1) -- Peripheral cable is plugged.
loose (2) -- Peripheral cable is loose.
unplugged (3) -- Peripheral cable is unplugged.
unknown (4) -- Cannot detect peripheral cable status.
internalError (5) -- Internal error."
SYNTAX INTEGER {
plugged(1),
loose(2),
unplugged(3),
unknown(4),
internalError(5)
}
CtpPeripheralPowerCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The textual convention identifies power status of the attached
peripheral through HDMI.
on (1) -- Peripheral power is on.
standby (2) -- Peripheral power is in standby mode.
off (3) -- Peripheral power is off.
unknown (4) -- Cannot detect peripheral power status.
internalError (5) -- Internal error."
SYNTAX INTEGER {
on(1),
standby(2),
off(3),
unknown(4),
internalError(5)
}
CtpPeripheralStatusCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The textual convention identifies the peripheral status.
noError (0) --
Expected peripheral device is functioning through
the attached port.
other (1) --
None of the listed state.
cableError (2) --
Expected peripheral device has cabling issue.
powerError (3) --
Expected peripheral device has power issue.
mgmtSysConfigError (4) --
Expected peripheral device has communications
management system configuration issue.
systemError (5) --
Telepresence system error.
deviceError (6) --
Expected peripheral device is attached but not
fully functional.
linkError (7) --
Expected peripheral device has port level link issue.
commError (8) --
Expected peripheral device has port level communication
issue."
SYNTAX INTEGER {
noError(0),
other(1),
cableError(2),
powerError(3),
mgmtSysConfigError(4),
systemError(5),
deviceError(6),
linkError(7),
commError(8)
}
CtpSystemAccessProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The textual convention identifies supported Telepresence user
access protocol.
http (1) -- Hypertext Transfer Protocol (HTTP)
snmp (2) -- Simple Network Management Protocol (SNMP)
ssh (3) -- Secure Shell (SSH)"
SYNTAX INTEGER {
http(1),
snmp(2),
ssh(3)
}
CtpPeripheralDeviceCategoryCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The textual convention identifies the peripheral type.
unknown (0) -- Unknown Device
other (1) -- None of the listed device
uplinkDevice (2) -- Device attached to CTS uplink port
ipPhone (3) -- IP phone
camera (4) -- Camera
display (5) -- Display
secCodec (6) -- CTS secondary codec
docCamera (7) -- Document camera
projector (8) -- Projector
dviDevice (9) -- Device attached to DVI port
presentationCodec (10) -- CTS codec process presentation
-- stream
auxiliaryControlUnit (11) -- Auxiliary control unit
audioExpansionUnit (12) -- Audio expansion unit
microphone (13) -- Microphone
headset (14) -- Headset
positionMic (15) -- Position microphone
digitalMediaSystem (16) -- Digitial Media System
auxHDMIOuputDevice (17) -- Auxiliary HDMI output device"
SYNTAX INTEGER {
unknown(0),
other(1),
uplinkDevice(2),
ipPhone(3),
camera(4),
display(5),
secCodec(6),
docCamera(7),
projector(8),
dviDevice(9),
presentationCodec(10),
auxiliaryControlUnit(11),
audioExpansionUnit(12),
microphone(13),
headset(14),
positionMic(15),
digitialMediaSystem(16),
auxHDMIOutputDevice(17)
}
ciscoTelepresenceMIBNotifs OBJECT IDENTIFIER
::= { ciscoTelepresenceMIB 0 }
ciscoTelepresenceMIBObjects OBJECT IDENTIFIER
::= { ciscoTelepresenceMIB 1 }
ciscoTelepresenceMIBConform OBJECT IDENTIFIER
::= { ciscoTelepresenceMIB 2 }
ctpObjects OBJECT IDENTIFIER
::= { ciscoTelepresenceMIBObjects 1 }
ctpPeripheralStatusObjects OBJECT IDENTIFIER
::= { ciscoTelepresenceMIBObjects 2 }
ctpEventHistory OBJECT IDENTIFIER
::= { ciscoTelepresenceMIBObjects 3 }
-- Telepresence Management Configuration Group
ctpPeripheralErrorNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object controls generation of
ctpPeripheralErrorNotification.
When the object is 'true(1)', generation of
ctpPeripheralErrorNotification is enabled.
When the object is 'false(2)', generation of
ctpPeripheralErrorNotification is disabled."
DEFVAL { false }
::= { ctpObjects 1 }
ctpSysUserAuthFailNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls generation of
ctpSysUserAuthFailNotification.
When the object is 'true(1)', generation of
ctpSysUserAuthFailNotification is enabled.
When the object is 'false(2)', generation of
ctpSysUserAuthFailNotification is disabled."
DEFVAL { false }
::= { ctpObjects 2 }
ctpSystemReset OBJECT-TYPE
SYNTAX CtpSystemResetMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to reset or restart a Telepresence system."
DEFVAL { noRestart }
::= { ctpObjects 3 }
ctpPeriStatusChangeNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls generation of
ctpPeriStatusChangeNotification.
When the object is 'true(1)', generation of
ctpPeriStatusChangeNotification is enabled.
When the object is 'false(2)', generation of
ctpPeriStatusChangeNotification is disabled."
DEFVAL { false }
::= { ctpObjects 4 }
-- Telepresence Peripheral Status Group
--
--
-- Peripheral Status Table
ctpPeripheralStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtpPeripheralStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains system peripheral information.
An entry in this table has a corresponding entry,
INDEX-ed by the same value of ctpPeripheralIndex,
in the table relevant to the type of interface:
ctpEtherPeripheralStatusTable for Ethernet,
ctpHDMIPeripheralStatusTable for HDMI or
ctpDVIPeripheralStatusTable for DVI."
::= { ctpPeripheralStatusObjects 1 }
ctpPeripheralStatusEntry OBJECT-TYPE
SYNTAX CtpPeripheralStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains information about one peripheral which is
configured or detected by a Telepresence system."
INDEX { ctpPeripheralIndex }
::= { ctpPeripheralStatusTable 1 }
CtpPeripheralStatusEntry ::= SEQUENCE {
ctpPeripheralIndex Unsigned32,
ctpPeripheralDescription SnmpAdminString,
ctpPeripheralStatus CtpPeripheralStatusCode,
ctpPeripheralDeviceCategory CtpPeripheralDeviceCategoryCode,
ctpPeripheralDeviceNumber Unsigned32
}
ctpPeripheralIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies a unique index for a peripheral
which is attached to a Telepresence system."
::= { ctpPeripheralStatusEntry 1 }
ctpPeripheralDescription OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies a description of the attached peripheral.
Peripheral description may be the peripheral type, model and/or
version information or a peripheral signal description."
::= { ctpPeripheralStatusEntry 2 }
ctpPeripheralStatus OBJECT-TYPE
SYNTAX CtpPeripheralStatusCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies a peripheral status."
::= { ctpPeripheralStatusEntry 3 }
ctpPeripheralDeviceCategory OBJECT-TYPE
SYNTAX CtpPeripheralDeviceCategoryCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies a peripheral category of a device."
::= { ctpPeripheralStatusEntry 4 }
ctpPeripheralDeviceNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies a device number for a peripheral.
Device number is unique within the same peripheral device
category."
::= { ctpPeripheralStatusEntry 5 }
-- Peripheral Status Table connected via Ethernet
ctpEtherPeripheralStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtpEtherPeripheralStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains information about all peripherals
connected to the system via Ethernet port."
::= { ctpPeripheralStatusObjects 2 }
ctpEtherPeripheralStatusEntry OBJECT-TYPE
SYNTAX CtpEtherPeripheralStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains information about one peripheral
attached to the Telepresence system via Ethernet."
INDEX {
ctpPeripheralIndex,
ctpEtherPeripheralIndex
}
::= { ctpEtherPeripheralStatusTable 1 }
CtpEtherPeripheralStatusEntry ::= SEQUENCE {
ctpEtherPeripheralIndex Unsigned32,
ctpEtherPeripheralIfIndex InterfaceIndexOrZero,
ctpEtherPeripheralAddrType InetAddressType,
ctpEtherPeripheralAddr InetAddress,
ctpEtherPeripheralStatus CtpPeripheralStatusCode
}
ctpEtherPeripheralIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies a unique number for a peripheral
Ethernet interface.
If no peripheral has more than one Ethernet interface, this
object will have value '1'."
::= { ctpEtherPeripheralStatusEntry 1 }
ctpEtherPeripheralIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies an index value that uniquely identifies
the interface to which this entry is applicable. The
interface identified by a particular value of this index is
the same interface as identified by the same value of the
IF-MIB's ifIndex.
If this entry doesn't have corresponding ifIndex, then this
value will have value '0'."
::= { ctpEtherPeripheralStatusEntry 2 }
ctpEtherPeripheralAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the type of address contained
in the corresponding instance of ctpEtherPeripheralAddr."
::= { ctpEtherPeripheralStatusEntry 3 }
ctpEtherPeripheralAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the address of the attached peripheral
in the format given by the corresponding instance of
ctpEtherPeripheralAddrType."
::= { ctpEtherPeripheralStatusEntry 4 }
ctpEtherPeripheralStatus OBJECT-TYPE
SYNTAX CtpPeripheralStatusCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies attached peripheral status retrieved via
Ethernet port."
::= { ctpEtherPeripheralStatusEntry 5 }
-- Peripheral Status Table connected via HDMI
ctpHDMIPeripheralStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtpHDMIPeripheralStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains information about all peripherals
connected to the system via HDMI."
::= { ctpPeripheralStatusObjects 3 }
ctpHDMIPeripheralStatusEntry OBJECT-TYPE
SYNTAX CtpHDMIPeripheralStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains information about one Telepresence
HDMI peripheral."
INDEX {
ctpPeripheralIndex,
ctpHDMIPeripheralIndex
}
::= { ctpHDMIPeripheralStatusTable 1 }
CtpHDMIPeripheralStatusEntry ::= SEQUENCE {
ctpHDMIPeripheralIndex Unsigned32,
ctpHDMIPeripheralCableStatus CtpPeripheralCableCode,
ctpHDMIPeripheralPowerStatus CtpPeripheralPowerCode
}
ctpHDMIPeripheralIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies a unique number for a peripheral HDMI.
If no peripheral has more than one HDMI, this
object will have value '1'."
::= { ctpHDMIPeripheralStatusEntry 1 }
ctpHDMIPeripheralCableStatus OBJECT-TYPE
SYNTAX CtpPeripheralCableCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies cable status of an attached peripheral.
This object is set to 'loose' if system detects cable is
'unplugged' but power is 'on'."
::= { ctpHDMIPeripheralStatusEntry 2 }
ctpHDMIPeripheralPowerStatus OBJECT-TYPE
SYNTAX CtpPeripheralPowerCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies power status of an attached peripheral.
This object is set to 'unknown' if system detects cable is
'unplugged'."
::= { ctpHDMIPeripheralStatusEntry 3 }
-- Peripheral Status Table connected via DVI
ctpDVIPeripheralStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtpDVIPeripheralStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains information about all peripherals
connected to the system via DVI."
::= { ctpPeripheralStatusObjects 4 }
ctpDVIPeripheralStatusEntry OBJECT-TYPE
SYNTAX CtpDVIPeripheralStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains information about one peripheral
attached to the Telepresence system via DVI."
INDEX {
ctpPeripheralIndex,
ctpDVIPeripheralIndex
}
::= { ctpDVIPeripheralStatusTable 1 }
CtpDVIPeripheralStatusEntry ::= SEQUENCE {
ctpDVIPeripheralIndex Unsigned32,
ctpDVIPeripheralCableStatus CtpPeripheralCableCode
}
ctpDVIPeripheralIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies a unique number for a peripheral DVI.
If no peripheral has more than one DVI, this
object will have value '1'.
Note that some Telepresence systems have no DVI port and some
Telepresence systems have only one DVI port."
::= { ctpDVIPeripheralStatusEntry 1 }
ctpDVIPeripheralCableStatus OBJECT-TYPE
SYNTAX CtpPeripheralCableCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies attached device
cable status reported by DVI."
::= { ctpDVIPeripheralStatusEntry 2 }
-- Peripheral Status Table connected via RS-232
ctpRS232PeripheralStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtpRS232PeripheralStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains information about all peripherals
connected to the system via RS-232."
::= { ctpPeripheralStatusObjects 5 }
ctpRS232PeripheralStatusEntry OBJECT-TYPE
SYNTAX CtpRS232PeripheralStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains information about one peripheral
attached to the Telepresence system via RS-232."
INDEX {
ctpPeripheralIndex,
ctpRS232PeripheralIndex
}
::= { ctpRS232PeripheralStatusTable 1 }
CtpRS232PeripheralStatusEntry ::= SEQUENCE {
ctpRS232PeripheralIndex Unsigned32,
ctpRS232PortIndex InterfaceIndexOrZero,
ctpRS232PeripheralConnStatus INTEGER
}
ctpRS232PeripheralIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies a unique number for a peripheral RS-232.
If no peripheral has more than one RS-232, this
object will have value '1'.
Note that some Telepresence systems have no RS-232 port."
::= { ctpRS232PeripheralStatusEntry 1 }
ctpRS232PortIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies an index value that uniquely identifies
the RS-232 port to which this entry is applicable.
Its value is the same as RS-232-MIB's rs232PortIndex for
the port.
If RS-232-MIB is not supported by the agent, then this
value will have value '0'."
::= { ctpRS232PeripheralStatusEntry 2 }
ctpRS232PeripheralConnStatus OBJECT-TYPE
SYNTAX INTEGER {
connected(1),
unknown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies peripheral which is
connected via RS232.
When the object is 'connected(1)', peripheral connection
via RS232 is working properly.
When the object is 'unknown(2)', peripheral connection
via RS232 is not working properly. It may due to device problem
or connection problem."
::= { ctpRS232PeripheralStatusEntry 3 }
-- Peripheral Attribute table
ctpPeripheralAttributeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtpPeripheralAttributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains information about attributes for the
peripherals which are connected to the system. Peripheral
attribute may specify peripheral's component information,
for example, an entry may specify lifetime of a lamp
on a presentation device."
::= { ctpPeripheralStatusObjects 6 }
ctpPeripheralAttributeEntry OBJECT-TYPE
SYNTAX CtpPeripheralAttributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains information about one peripheral
attribute related to the peripheral specified by
ctpPeripheralIndex."
INDEX {
ctpPeripheralIndex,
ctpPeripheralAttributeIndex
}
::= { ctpPeripheralAttributeTable 1 }
CtpPeripheralAttributeEntry ::= SEQUENCE {
ctpPeripheralAttributeIndex Unsigned32,
ctpPeripheralAttributeDescr INTEGER,
ctpPeripheralAttributeValue Unsigned32
}
ctpPeripheralAttributeIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies a unique number for a peripheral
attribute.
If no peripheral has more than one attribute, this
object will have value '1'."
::= { ctpPeripheralAttributeEntry 1 }
ctpPeripheralAttributeDescr OBJECT-TYPE
SYNTAX INTEGER {
lampOperTime(1),
lampState(2),
powerSwitchState(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies description of a attribute.
The supported attributes are
lampOperTime(1) -- indicate the lamp operating time
of a peripheral
lampState(2) -- indicate the lamp state
powerSwitchState(3) -- indicate the power on/off state
of a peripheral
Note that not all peripheral contains all the supported
attributes. Agent reports whatever is available."
::= { ctpPeripheralAttributeEntry 2 }
ctpPeripheralAttributeValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies value of the attribute corresponding
to ctpPeripheralAttributeDescr.
The possible value of the supported attributes is listed as
the following:
Attribute Unit SYNTAX
-----------------------------------------------------------
lampOperTime hours Unsigned32(0..4294967295)
lampState INTEGER {
on(1),
off(2),
failure(3),
unknown(4)
}
powerSwitchState INTEGER {
on(1),
off(2),
unknown(3)
}"
::= { ctpPeripheralAttributeEntry 3 }
-- Event History Group
--
-- Telepresence Peripheral Error History Table
ctpPeripheralErrorHistTableSize OBJECT-TYPE
SYNTAX Unsigned32 (0..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum number of entries that the
ctpPeripheralErrorHistTable can contain. When the
capacity of the ctpPeripheralErrorHistTable has reached
the value specified by this object, then the agent
deletes the oldest entity in order to accommodate
the new entry. A value of '0' prevents any history
from being retained.
Some agents restrict the value of this object to be less than
500."
DEFVAL { 10 }
::= { ctpEventHistory 1 }
ctpPeripheralErrorHistLastIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value of the
ctpPeripheralErrorHistIndex object corresponding to the
last entry added to the table by the agent.
If the management application uses the notifications defined
by this module, then it can poll this object to determine
whether it has missed a notification sent by the agent."
::= { ctpEventHistory 2 }
ctpPeripheralErrorHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtpPeripheralErrorHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a history of the detected peripheral
status changes.
After a management agent restart, when sysUpTime is reset to
zero, this table records all notifications until such time as
it becomes full. Thereafter, it remains full by retaining the
number of most recent notifications specified in
ctpPeripheralErrorHistTableSize."
::= { ctpEventHistory 3 }
ctpPeripheralErrorHistoryEntry OBJECT-TYPE
SYNTAX CtpPeripheralErrorHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains information about a Telepresence
peripheral status changes."
INDEX { ctpPeripheralErrorHistoryIndex }
::= { ctpPeripheralErrorHistoryTable 1 }
CtpPeripheralErrorHistoryEntry ::= SEQUENCE {
ctpPeripheralErrorHistoryIndex Unsigned32,
ctpPeripheralErrorIndex Unsigned32,
ctpPeripheralErrorStatus CtpPeripheralStatusCode,
ctpPeripheralErrorTimeStamp TimeStamp,
ctpPeripheralErrorDeviceCategory CtpPeripheralDeviceCategoryCode,
ctpPeripheralErrorDeviceNumber Unsigned32
}
ctpPeripheralErrorHistoryIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique non-zero integer value that identifies a
CtpPeripheralErrorHistoryEntry in the table.
The value of this index starts from '1' and monotonically
increases for each peripheral error known to the agent.
If the value of this object is '4294967295',
the agent will use '1' as the value of the
next detected peripheral status change."
::= { ctpPeripheralErrorHistoryEntry 1 }
ctpPeripheralErrorIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the value of ctpPeripheralIndex of a
peripheral which is in error state.
This object is deprecated in favor of
ctpPeripheralErrorDeviceCategory and
ctpPeripheralErrorDeviceNumber."
::= { ctpPeripheralErrorHistoryEntry 2 }
ctpPeripheralErrorStatus OBJECT-TYPE
SYNTAX CtpPeripheralStatusCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the peripheral status after its status
changed."
::= { ctpPeripheralErrorHistoryEntry 3 }
ctpPeripheralErrorTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value of the sysUpTime object at the
time the notification was generated."
::= { ctpPeripheralErrorHistoryEntry 4 }
ctpPeripheralErrorDeviceCategory OBJECT-TYPE
SYNTAX CtpPeripheralDeviceCategoryCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies peripheral device category after its
status changed."
::= { ctpPeripheralErrorHistoryEntry 5 }
ctpPeripheralErrorDeviceNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies peripheral device number after its
status changed.
Device number is unique within the same peripheral device
category."
::= { ctpPeripheralErrorHistoryEntry 6 }
-- User Authentication Failure History Table
ctpSysUserAuthFailHistTableSize OBJECT-TYPE
SYNTAX Unsigned32 (0..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the number of entries that the
ctpSysUserAuthFailHistTable can contain. When the
capacity of the ctpSysUserAuthFailHistTable has reached
the value specified by this object, then the agent
deletes the oldest entity in order to accommodate
the new entry. A value of '0' prevents any history
from being retained.
Some agents restrict the value of this object to be less than
500."
DEFVAL { 10 }
::= { ctpEventHistory 4 }
ctpSysUserAuthFailHistLastIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value of the
ctpSysUserAuthFailHistIndex object corresponding to the
last entry added to the table by the agent.
If the management application uses the notifications defined
by this module, then it can poll this object to determine
whether it has missed a notification sent by the agent."
::= { ctpEventHistory 5 }
ctpSysUserAuthFailHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtpSysUserAuthFailHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a history of detected user
authentication failures.
After a management agent restart, when sysUpTime is reset
to zero, this table records all user authentication failure
notifications until such time as it becomes full. Thereafter,
it remains full by retaining the number of most recent
notifications specified in ctpSysUserAuthFailHistTableSize."
::= { ctpEventHistory 6 }
ctpSysUserAuthFailHistoryEntry OBJECT-TYPE
SYNTAX CtpSysUserAuthFailHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains information about a Telepresence
system user authentication failure."
INDEX { ctpSysUserAuthFailHistoryIndex }
::= { ctpSysUserAuthFailHistoryTable 1 }
CtpSysUserAuthFailHistoryEntry ::= SEQUENCE {
ctpSysUserAuthFailHistoryIndex Unsigned32,
ctpSysUserAuthFailSourceAddrType InetAddressType,
ctpSysUserAuthFailSourceAddr InetAddress,
ctpSysUserAuthFailSourcePort Unsigned32,
ctpSysUserAuthFailUserName SnmpAdminString,
ctpSysUserAuthFailAccessProtocol CtpSystemAccessProtocol,
ctpSysUserAuthFailTimeStamp TimeStamp
}
ctpSysUserAuthFailHistoryIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique non-zero integer value that identifies a
CtpSysUserAuthFailHistoryEntry in the table.
The value of this index starts from '1' and monotonically
increases for each system authentication failure event
known to the agent. If the value of this object is
'4294967295', the agent will use '1' as the value of
the next user authentication failure event."
::= { ctpSysUserAuthFailHistoryEntry 1 }
ctpSysUserAuthFailSourceAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the type of address contained
in the corresponding instance of ctpSysUserAuthFailSourceAddr."
::= { ctpSysUserAuthFailHistoryEntry 2 }
ctpSysUserAuthFailSourceAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the source address when the
user authentication failure occurred, in the format given by
the corresponding instance of ctpSysUserAuthFailSourceAddrType."
::= { ctpSysUserAuthFailHistoryEntry 3 }
ctpSysUserAuthFailSourcePort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the source TCP/UDP port number
when a user authentication failure occurred."
::= { ctpSysUserAuthFailHistoryEntry 4 }
ctpSysUserAuthFailUserName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the user name which was used to gain
system access when authentication failure occurred."
::= { ctpSysUserAuthFailHistoryEntry 5 }
ctpSysUserAuthFailAccessProtocol OBJECT-TYPE
SYNTAX CtpSystemAccessProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the access protocol when a user
authentication failure occurred."
::= { ctpSysUserAuthFailHistoryEntry 6 }
ctpSysUserAuthFailTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value of the sysUpTime object at the
time the notification was generated."
::= { ctpSysUserAuthFailHistoryEntry 7 }
-- Telepresence System Notifications
ctpPeripheralErrorNotification NOTIFICATION-TYPE
OBJECTS {
ctpPeripheralErrorIndex,
ctpPeripheralErrorStatus
}
STATUS deprecated
DESCRIPTION
"This notification is sent when a peripheral error is detected.
This notification is deprecated in favor of
ctpPeriStatusChangeNotification."
::= { ciscoTelepresenceMIBNotifs 1 }
ctpSysUserAuthFailNotification NOTIFICATION-TYPE
OBJECTS {
ctpSysUserAuthFailSourceAddrType,
ctpSysUserAuthFailSourceAddr,
ctpSysUserAuthFailSourcePort,
ctpSysUserAuthFailUserName,
ctpSysUserAuthFailAccessProtocol
}
STATUS current
DESCRIPTION
"This notification is sent when a user authentication failure
via a Telepresence supported access protocol is
detected."
::= { ciscoTelepresenceMIBNotifs 2 }
ctpPeriStatusChangeNotification NOTIFICATION-TYPE
OBJECTS {
ctpPeripheralErrorIndex,
ctpPeripheralErrorDeviceCategory,
ctpPeripheralErrorDeviceNumber,
ctpPeripheralErrorStatus
}
STATUS current
DESCRIPTION
"This notification is sent when a peripheral status is changed."
::= { ciscoTelepresenceMIBNotifs 3 }
-- Conformance
ciscoTelepresenceCompliances OBJECT IDENTIFIER
::= { ciscoTelepresenceMIBConform 1 }
ciscoTelepresenceMIBGroups OBJECT IDENTIFIER
::= { ciscoTelepresenceMIBConform 2 }
ciscoTelepresenceCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement the
Cisco Telepresence MIB."
MODULE -- this module
MANDATORY-GROUPS {
ciscoTpConfigurationGroup,
ciscoTpPeripheralStatusGroup,
ciscoTpEventHistoryGroup,
ciscoTpNotificationGroup
}
OBJECT ctpPeripheralErrorNotifyEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpSysUserAuthFailNotifyEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpSystemReset
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpPeripheralErrorHistTableSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpSysUserAuthFailHistTableSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoTelepresenceCompliances 1 }
ciscoTelepresenceComplianceR01 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement the
Cisco Telepresence MIB."
MODULE -- this module
MANDATORY-GROUPS {
ciscoTpConfigurationGroup,
ciscoTpPeripheralStatusGroup,
ciscoTpEventHistoryGroup,
ciscoTpNotificationGroup
}
GROUP ciscoTpRS232PeripheralStatusGroup
DESCRIPTION
"This group is mandatory for a Telepresence system which
has RS323 interface."
GROUP ciscoTpPeripheralAttributeGroup
DESCRIPTION
"This group is optional."
OBJECT ctpPeripheralErrorNotifyEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpSysUserAuthFailNotifyEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpSystemReset
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpPeripheralErrorHistTableSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpSysUserAuthFailHistTableSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoTelepresenceCompliances 2 }
ciscoTelepresenceComplianceR02 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
Cisco Telepresence MIB."
MODULE -- this module
MANDATORY-GROUPS {
ciscoTpConfigurationGroupR01,
ciscoTpPeripheralStatusGroupR01,
ciscoTpEventHistoryGroupR01,
ciscoTpNotificationGroupR01
}
GROUP ciscoTpRS232PeripheralStatusGroup
DESCRIPTION
"This group is mandatory for a Telepresence system which
has RS323 interface."
GROUP ciscoTpPeripheralAttributeGroup
DESCRIPTION
"This group is optional."
OBJECT ctpSysUserAuthFailNotifyEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpSystemReset
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpPeriStatusChangeNotifyEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpSysUserAuthFailHistTableSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpPeripheralErrorHistTableSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoTelepresenceCompliances 3 }
-- Units of Conformance
ciscoTpConfigurationGroup OBJECT-GROUP
OBJECTS {
ctpPeripheralErrorNotifyEnable,
ctpSysUserAuthFailNotifyEnable,
ctpSystemReset
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the notification
configuration and system reset."
::= { ciscoTelepresenceMIBGroups 1 }
ciscoTpPeripheralStatusGroup OBJECT-GROUP
OBJECTS {
ctpPeripheralDescription,
ctpPeripheralStatus,
ctpEtherPeripheralIfIndex,
ctpEtherPeripheralAddrType,
ctpEtherPeripheralAddr,
ctpEtherPeripheralStatus,
ctpHDMIPeripheralCableStatus,
ctpHDMIPeripheralPowerStatus,
ctpDVIPeripheralCableStatus
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the Telepresence peripheral
information."
::= { ciscoTelepresenceMIBGroups 2 }
ciscoTpEventHistoryGroup OBJECT-GROUP
OBJECTS {
ctpPeripheralErrorHistTableSize,
ctpPeripheralErrorHistLastIndex,
ctpPeripheralErrorIndex,
ctpPeripheralErrorStatus,
ctpPeripheralErrorTimeStamp,
ctpSysUserAuthFailHistTableSize,
ctpSysUserAuthFailHistLastIndex,
ctpSysUserAuthFailSourceAddrType,
ctpSysUserAuthFailSourceAddr,
ctpSysUserAuthFailSourcePort,
ctpSysUserAuthFailUserName,
ctpSysUserAuthFailAccessProtocol,
ctpSysUserAuthFailTimeStamp
}
STATUS deprecated
DESCRIPTION
"A collection of managed objects providing notification event
history information."
::= { ciscoTelepresenceMIBGroups 3 }
ciscoTpNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ctpPeripheralErrorNotification,
ctpSysUserAuthFailNotification
}
STATUS deprecated
DESCRIPTION
"A collection of Telepresence system notifications."
::= { ciscoTelepresenceMIBGroups 4 }
ciscoTpRS232PeripheralStatusGroup OBJECT-GROUP
OBJECTS {
ctpRS232PortIndex,
ctpRS232PeripheralConnStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing the information
about Telepresence peripheral which is connected via RS232."
::= { ciscoTelepresenceMIBGroups 5 }
ciscoTpPeripheralAttributeGroup OBJECT-GROUP
OBJECTS {
ctpPeripheralAttributeDescr,
ctpPeripheralAttributeValue
}
STATUS current
DESCRIPTION
"A collection of managed objects providing peripheral
attribute information."
::= { ciscoTelepresenceMIBGroups 6 }
ciscoTpPeripheralStatusGroupR01 OBJECT-GROUP
OBJECTS {
ctpPeripheralDescription,
ctpPeripheralStatus,
ctpPeripheralDeviceCategory,
ctpPeripheralDeviceNumber,
ctpEtherPeripheralIfIndex,
ctpEtherPeripheralAddrType,
ctpEtherPeripheralAddr,
ctpEtherPeripheralStatus,
ctpHDMIPeripheralCableStatus,
ctpHDMIPeripheralPowerStatus,
ctpDVIPeripheralCableStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing the Telepresence peripheral
information."
::= { ciscoTelepresenceMIBGroups 7 }
ciscoTpEventHistoryGroupR01 OBJECT-GROUP
OBJECTS {
ctpPeripheralErrorHistTableSize,
ctpPeripheralErrorHistLastIndex,
ctpPeripheralErrorIndex,
ctpPeripheralErrorStatus,
ctpPeripheralErrorTimeStamp,
ctpPeripheralErrorDeviceCategory,
ctpPeripheralErrorDeviceNumber,
ctpSysUserAuthFailHistTableSize,
ctpSysUserAuthFailHistLastIndex,
ctpSysUserAuthFailSourceAddrType,
ctpSysUserAuthFailSourceAddr,
ctpSysUserAuthFailSourcePort,
ctpSysUserAuthFailUserName,
ctpSysUserAuthFailAccessProtocol,
ctpSysUserAuthFailTimeStamp
}
STATUS current
DESCRIPTION
"A collection of managed objects providing notification event
history information."
::= { ciscoTelepresenceMIBGroups 8 }
ciscoTpNotificationGroupR01 NOTIFICATION-GROUP
NOTIFICATIONS {
ctpPeriStatusChangeNotification,
ctpSysUserAuthFailNotification
}
STATUS current
DESCRIPTION
"A collection of Telepresence system notifications."
::= { ciscoTelepresenceMIBGroups 9 }
ciscoTpConfigurationGroupR01 OBJECT-GROUP
OBJECTS {
ctpSysUserAuthFailNotifyEnable,
ctpSystemReset,
ctpPeriStatusChangeNotifyEnable
}
STATUS current
DESCRIPTION
"A collection of objects providing the notification
configuration and system reset."
::= { ciscoTelepresenceMIBGroups 10 }
END
Reference in New Issue View Git Blame Copy Permalink