MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-TELEPRESENCE-CALL-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

2364 lines
81 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-TELEPRESENCE-CALL-MIB.my: Cisco MIB to manage a
-- Telepresence call.
-- Copyright (c) 2007 - 2009 by Cisco Systems Inc.
-- All rights reserved.
--
-- ****************************************************************
CISCO-TELEPRESENCE-CALL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Counter64,
Unsigned32,
Integer32,
Gauge32,
TimeTicks,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
RowStatus,
TruthValue,
DateAndTime,
VariablePointer
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InetAddress,
InetAddressType
FROM INET-ADDRESS-MIB
Unsigned64
FROM CISCO-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoTelepresenceCallMIB MODULE-IDENTITY
LAST-UPDATED "200910210000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: tsbu-snmp-dev@cisco.com"
DESCRIPTION
"The MIB module defines the managed objects for
Telepresence calls.
Telepresence refers to a set of technologies which
allow a person to feel as if they were present, to give
the appearance that they were present, or to have an
effect, at a location other than their true location.
Telepresence call is an audio-video call; however, some
Telepresence systems also support audio addin call.
Different security levels are supported in some Telepresence
systems; security level may be specified from call management
system.
Some Telepresence systems support Telepresence meeting, the
agent of the corresponding systems may also support
CISCO-TELEPRESENCE-MEETING-MIB."
REVISION "200910210000Z"
DESCRIPTION
"Added ctpcAttributes, ctpcRemoteDeviceType, ctpcTxCodec,
ctpcTxFrameRate, ctpcRxCodec, ctpcRxFrameRate,
ctpcMgmtSysConnStatus, ctpcMgmtSysSIPRespCode and
ctpcMgmtSysConnEventHistoryTable. Enhanced CtpcStateCode and
CtpcStreamSourceType."
REVISION "200809170000Z"
DESCRIPTION
"Updated the description on default value setting for the
objects ctpcStatRisingThreshold and ctpcStatFallingThreshold.
Added new enumeration 'unknown' to ctpcType and ctpcDirection.
Updated the unit of ctpcTxTotalBytes and ctpcTxTotalPackets."
REVISION "200801230000Z"
DESCRIPTION
"Updated the description on CtpcEntry."
REVISION "200712280000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 644 }
-- Textual Conventions
CtpcE164Address ::= TEXTUAL-CONVENTION
DISPLAY-HINT "32t"
STATUS current
DESCRIPTION
"A UTF-8 string limited to the character set defined for
E.164, '0123456789*#,<quote>'.
Note that <quote> represents the double quote which
cannot be contained in a SMI description clause."
REFERENCE "ITU-T E.164"
SYNTAX OCTET STRING (SIZE (1..32))
CtpcStreamMediaType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention identifies a call stream type. A
Telepresence call has two media streams, video and audio while
an audio add-in call only has one media stream, audio.
video (1) -- Video stream of a call.
audio (2) -- Audio stream of a call."
SYNTAX INTEGER {
video(1),
audio(2)
}
CtpcStreamSourceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention identifies the stream source of a call.
secCodec1 (1) -- First secondary CODEC stream
priCodec (2) -- Primary CODEC stream
secCodec2 (3) -- Second secondary CODEC stream
auxiliary (4) -- First auxiliary stream like presentation
stream.
secLegacy1 (5) -- Legacy stream generated by first
secondary CODEC for legacy system.
priLegacy (6) -- Legacy stream generated by Primary CODEC
for legacy system.
secLegacy2 (7) -- Legacy stream generated by second
secondary CODEC for legacy system.
auxiliary2 (8) -- Second auxiliary stream."
SYNTAX INTEGER {
secCodec1(1),
priCodec(2),
secCodec2(3),
auxiliary(4),
secLegacy1(5),
priLegacy(6),
secLegacy2(7),
auxiliary2(8)
}
CtpcStateCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The textual convention identifies a call state.
unknown (1) --
The system does not know what state that the call is in.
other (2) --
The call is in a state not listed.
noMgmtSysConn (3) --
The call cannot be dialed out due to no call
management system connection. It is applicable only
if the system is in 'mgmtSys' mode.
noDialTone (4) --
The call cannot be dialed out due to no line is
available.
invalidNumber (5) --
The directory number of the remote party is invalid.
ringing (6) --
The call is waiting to be answered.
noAnswer (7) --
The call is not answered.
inProgress (8) --
The call is in progress.
remoteHold (9) --
The call is on hold by remote party.
shareLineActive (10) --
The call is being picked up by other share line device.
inLocalConference (11) --
The call is in local conference mode.
terminatedByError (12) --
The call is terminated because of error.
localHold (13) --
The call is on hold by local party.
terminatedNormally (14) --
The call is terminated normally.
answer (15) --
Answer an incoming call.
resume (16) --
Resume a call from local hold.
busy (17) --
The call is not answered due to remote busy.
pause (18) --
Put the call in pause mode, no video and audio streams
will be received.
playback (19) --
The call is in playback state.
recording (20) --
The call is being recorded."
SYNTAX INTEGER {
unknown(1), -- the following twelve values are
-- states: these value may be read,
-- but not written
other(2),
noMgmtSysConn(3),
noDialTone(4),
invalidNumber(5),
ringing(6),
noAnswer(7),
inProgress(8),
remoteHold(9),
shareLineActive(10),
inLocalConference(11),
terminatedbyError(12),
localHold(13), -- the following value are state
-- which may be read or written
terminatedNormally(14),
answer(15), -- the following value is action
-- which may be written but not read
resume(16),
busy(17), -- the following three states may be
-- read but not written
pause(18),
playback(19),
recording(20) -- this state may be read or
-- written
}
CtpcStatMonitoredAttribute ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The textual convention identifies the monitoring type for a
Telepresence call.
latency (1) --
Round trip latency measurement.
jitter (2) --
Jitter of incoming and/or outgoing frames.
packetLoss (3) --
Percentage of packet loss for the incoming and/or
outgoing packets.
authFailurePacket (4) --
Number of packets which has Secured Real-Time
Protocol (SRTP) or Secured Real-Time Control
Protocol (SRTCP) authentication failure."
SYNTAX INTEGER {
latency(1),
jitter(2),
packetLoss(3),
authFailurePacket(4)
}
CtpcStatMonitoredAttributeUnit ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The textual convention identifies a Telepresence call
monitoring type's measuring unit which is milliseconds,
micropercent (10^-6 percent) or number of packets."
SYNTAX INTEGER {
milliseconds(1),
micropercent(2),
packets(3)
}
CtpcStatAlarmMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The textual convention identifies the monitoring alarm mode.
risingAlarm (1) --
Alarm will be generated if first sample is greater
than or equal to rising threshold.
fallingAlarm (2) --
Alarm will be generated if first sample is less
than or equal to falling threshold.
risingOrFallingAlarm (3) --
Alarm will be generated if first sample is greater
than or equal to rising threshold or less than or
equal to falling threshold."
SYNTAX INTEGER {
risingAlarm(1),
fallingAlarm(2),
risingOrFallingAlarm(3)
}
CtpcStatThreshCrossedType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The textual convention identifies the monitoring threshold
cross type.
risingThreshold (1) --
The sample data has crossed the rising threshold.
fallingThreshold (2) --
The sample data has crossed the falling threshold."
SYNTAX INTEGER {
risingThreshold(1),
fallingThreshold(2)
}
CtpcAttributes ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The textual convention identifies the attributes or
characteristics of a call.
interop (0) --
The call involves at least one interop party.
highDefinitionInterop (1) --
The call involves at least one high definition interop
party.
webEx (2) --
The call involves at least one WebEx party.
schedule (3) --
This call is a scheduled call.
satellite (4) --
This call is going through satellite connection.
t1 (5) --
This call is going through T1 connection.
liveDesk (6) --
This call is calling to live desk."
SYNTAX BITS {
interop(0),
highDefinitionInterop(1),
webEx(2),
schedule(3),
satellite(4),
t1(5),
liveDesk(6)
}
CtpcRemoteDeviceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The textual convention identifies the remote device type of a call.
unknown (1) --
The remote device type is not known.
other (2) --
The remote device type is not listed.
audioDevice (3) --
Audio device.
videoLegacyDevice (4) --
Video device which is sending legacy stream.
highDefinitionLegacyDevice (5) --
Video device which is sending high definition legacy stream.
singleTelepresence (6) --
Telepresence device which is sending single video stream.
tripleTelepresence (7) --
Telepresence device which is sending three video streams.
telepresenceMultipointSwitch (8) --
Telepresence Multipoint Switch.
telepresenceRecordingServer (9) --
Telepresence Recording Server.
telepresenceTranscodingDevice(10) --
Telepresence Transcoding Device."
SYNTAX INTEGER {
unknown(1),
other(2),
audioDevice(3),
videoLegacyDevice(4),
highDefinitionLegacyDevice(5),
singleTelepresence(6),
tripleTelepresence(7),
telepresenceMultipointSwitch(8),
telepresenceRecordingServer(9),
telepresenceTranscodingDevice(10)
}
CtpcCodecType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The textual convention identifies the codec type of a stream.
unknown (1) -- Codec type is not known.
other (2) -- Codec type is not listed.
aaclc (3) -- Advanced Audio Coding, Low Complexity.
aacld (4) -- MPEG-4 Low Delay Audio Codec.
g711A (5) -- G.711 A-Law audio codec.
g711U (6) -- G.711 U-Law audio codec.
g722 (7) -- G.722 audio codec.
g7221 (8) -- G.7221 audio codec.
g728 (9) -- G.728 audio codec.
g729 (10) -- G.729 audio codec.
h263 (11) -- H.263 video codec.
h264 (12) -- H.264 video codec."
SYNTAX INTEGER {
unknown(1),
other(2),
aaclc(3),
aacld(4),
g711A(5),
g711U(6),
g722(7),
g7221(8),
g728(9),
g729(10),
h263(11),
h264(12)
}
CtpcMgmtSysConnStatusCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The textual convention identifies the management system
connection status.
unknown (1) --
Call management system connection status is unknown.
other (2) --
Call management system connection status is not listed.
internalError (3) --
Telepresence system has internal system error to return
call management system connection status.
notRegister (4) --
Telepresence system is not register to the
call management system.
registered (5) --
Telepresence registered to a call management system.
registrationFailure (6) --
Call management system registration failed."
SYNTAX INTEGER {
unknown(1),
other(2),
internalError(3),
notRegister(4),
registered(5),
registraionFailure(6)
}
ciscoTelepresenceCallMIBNotifs OBJECT IDENTIFIER
::= { ciscoTelepresenceCallMIB 0 }
ciscoTelepresenceCallMIBObjects OBJECT IDENTIFIER
::= { ciscoTelepresenceCallMIB 1 }
ciscoTelepresenceCallMIBConform OBJECT IDENTIFIER
::= { ciscoTelepresenceCallMIB 2 }
ctpcObjects OBJECT IDENTIFIER
::= { ciscoTelepresenceCallMIBObjects 1 }
ctpcInfoObjects OBJECT IDENTIFIER
::= { ciscoTelepresenceCallMIBObjects 2 }
ctpcStatMonitorObjects OBJECT IDENTIFIER
::= { ciscoTelepresenceCallMIBObjects 3 }
ctpcStatObjects OBJECT IDENTIFIER
::= { ciscoTelepresenceCallMIBObjects 4 }
ctpcStatEventHistory OBJECT IDENTIFIER
::= { ciscoTelepresenceCallMIBObjects 5 }
ctpcMgmtSysConnEventHistory OBJECT IDENTIFIER
::= { ciscoTelepresenceCallMIBObjects 6 }
-- Cisco Telepresence Call Configuration Group
ctpcStatNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls generation of notifications for the
real-time call statistics data monitoring.
Call statistics monitoring threshold can be set by creating
a corresponding ctpcStatMonitoredEntry. Notification will be
generated based on the value of the ctpcStatStartupAlarm and
the thresholds.
When the object is 'true', the agent will generate
notification when the monitoring threshold is crossed.
When the object is 'false', the agent will not
generate notification when the monitoring threshold is crossed."
DEFVAL { false }
::= { ctpcObjects 1 }
ctpcMgmtSysConnNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls generation of notifications for
call management system connection state changes.
When the object is 'true', the agent will generate
notification when call management system connection state
changes.
When the object is 'false', the agent will not
generate notification when call management system connection
state changes."
DEFVAL { false }
::= { ctpcObjects 2 }
-- CTS Call Information Group
ctpcLocalAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the type of address contained in
the corresponding instance of ctpcLocalAddr."
::= { ctpcInfoObjects 1 }
ctpcLocalAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the address of the system in the format
given by the corresponding instance of ctpcLocalAddrType."
::= { ctpcInfoObjects 2 }
ctpcLocalDirNumTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtpcLocalDirNumEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information about E.164 numbers assigned to the
Telepresence system.
The directory numbers usually are specified by the call
management system.
Some Telepresence systems have only one E.164 number assigned."
::= { ctpcInfoObjects 3 }
ctpcLocalDirNumEntry OBJECT-TYPE
SYNTAX CtpcLocalDirNumEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information about one E.164 number."
INDEX { ctpcLocalDirNumIndex }
::= { ctpcLocalDirNumTable 1 }
CtpcLocalDirNumEntry ::= SEQUENCE {
ctpcLocalDirNumIndex Unsigned32,
ctpcLocalDirNum CtpcE164Address
}
ctpcLocalDirNumIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object specifies a unique index for a local directory
number entry associates to the system."
::= { ctpcLocalDirNumEntry 1 }
ctpcLocalDirNum OBJECT-TYPE
SYNTAX CtpcE164Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the directory number of the Telepresence
system."
::= { ctpcLocalDirNumEntry 2 }
ctpcMode OBJECT-TYPE
SYNTAX INTEGER {
noMgmtSys(1),
mgmtSys(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the system configured call mode. It
indicates if the call is processed by call management system
or not.
nonMgmtSys(1) --
Telepresence system that does not connect to any call
management system such as Cisco Unified Communication
Manager (CUCM).
mgmtSys (2) --
Telepresence system that connects to a call management
system.
Note that some Telepresence systems support 'mgmtSys' only."
::= { ctpcInfoObjects 4 }
ctpcActiveMgmtSysIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value of ctpcMgmtSysIndex
which the Telepresence system currently connects.
If the system is in 'nonMgmtSys' mode, this object will have
value '0'"
::= { ctpcInfoObjects 5 }
ctpcMgmtSysTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtpcMgmtSysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of configured call management systems."
::= { ctpcInfoObjects 6 }
ctpcMgmtSysEntry OBJECT-TYPE
SYNTAX CtpcMgmtSysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains information about a call management system."
INDEX { ctpcMgmtSysIndex }
::= { ctpcMgmtSysTable 1 }
CtpcMgmtSysEntry ::= SEQUENCE {
ctpcMgmtSysIndex Unsigned32,
ctpcMgmtSysAddrType InetAddressType,
ctpcMgmtSysAddr InetAddress,
ctpcMgmtSysConnStatus CtpcMgmtSysConnStatusCode,
ctpcMgmtSysSIPRespCode Unsigned32
}
ctpcMgmtSysIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies a unique index for a call
management system entry."
::= { ctpcMgmtSysEntry 1 }
ctpcMgmtSysAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the type of address contained in the
corresponding instance of ctpcMgmtSysAddr."
::= { ctpcMgmtSysEntry 2 }
ctpcMgmtSysAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies a call management system address
which a Telepresence system can connect to if it is in
'mgmtSys' mode.
It is in the format given by the corresponding
instance of ctpcMgmtSysAddrType."
::= { ctpcMgmtSysEntry 3 }
ctpcMgmtSysConnStatus OBJECT-TYPE
SYNTAX CtpcMgmtSysConnStatusCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the last connection state
between the Telepresence and a call management system."
::= { ctpcMgmtSysEntry 4 }
ctpcMgmtSysSIPRespCode OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the last SIP response code from
call management system."
REFERENCE "RFC 3261, section 21"
::= { ctpcMgmtSysEntry 5 }
-- Cisco Telepresence Call Statistical Data Monitoring
ctpcStatMonitoredTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtpcStatMonitoredEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of configuration information for the monitoring of
statistics of active Telepresence calls.
The monitoring feature has a hysteresis mechanism to limit the
generation of events. This mechanism generates one event as a
threshold is crossed in the appropriate direction. No more
events are generated for that threshold until the opposite
threshold is crossed."
::= { ctpcStatMonitorObjects 1 }
ctpcStatMonitoredEntry OBJECT-TYPE
SYNTAX CtpcStatMonitoredEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains a particular threshold
configuration on an attribute for a stream type.
For example, if latency of video stream is configured; average
period latency of active Telepresence calls will be monitored.
A management station wishing to monitor a call statistical
attribute should create the associated instance of the row
status.
Once the appropriate instance of all the configuration objects
have been created, either by an explicit SNMP set request or by
default, the row status should be set to 'active' to initiate
the monitoring request. Note that only active call streams are
monitored."
INDEX {
ctpcStatMonitoredType,
ctpcStatMonitoredStreamType
}
::= { ctpcStatMonitoredTable 1 }
CtpcStatMonitoredEntry ::= SEQUENCE {
ctpcStatMonitoredType CtpcStatMonitoredAttribute,
ctpcStatMonitoredStreamType INTEGER,
ctpcStatMonitoredUnit CtpcStatMonitoredAttributeUnit,
ctpcStatRisingThreshold Unsigned32,
ctpcStatFallingThreshold Unsigned32,
ctpcStatStartupAlarm CtpcStatAlarmMode,
ctpcStatMonitoredStatus RowStatus
}
ctpcStatMonitoredType OBJECT-TYPE
SYNTAX CtpcStatMonitoredAttribute
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies a statistical attribute which to be
monitored."
::= { ctpcStatMonitoredEntry 1 }
ctpcStatMonitoredStreamType OBJECT-TYPE
SYNTAX INTEGER {
all(0),
video(1),
audio(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies a active Telepresence stream type
which to be monitored.
If the value of this object is 'all', all stream types are
monitored with the corresponding ctpcStatRisingThreshold
and/or ctpcStatFallingThreshold for ctpcStatMonitoredType.
Moreover, if this value is 'all', there cannot be another
row for the same value of ctpcStatMonitoredType which is either
'video' or 'audio'.
If ctpcStatMonitoredType has value latency(1) or
authFailurePacket(4), this object will have value '0'.
Note that some Telepresence systems may not support different
thresholds for different stream type."
::= { ctpcStatMonitoredEntry 2 }
ctpcStatMonitoredUnit OBJECT-TYPE
SYNTAX CtpcStatMonitoredAttributeUnit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the corresponding unit of a
monitoring attribute.
The following table lists the possible values of
this object, given the value of the corresponding instance
of ctpcStatMonitoredType.
ctpcStatMonitoredType ctpcStatMonitoredUnit
----------------------------------------------------
latency(1) milliseconds(1)
jitter(2) milliseconds(1)
packetLoss(3) micropercent(2)
authFailurePacket(4) packets(3)"
::= { ctpcStatMonitoredEntry 3 }
ctpcStatRisingThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the rising threshold of a monitoring
attribute.
When the call period value of the corresponding attribute
is greater than or equal to this threshold, a single event
will be generated.
A single event will also be generated if the first call period
value of the corresponding attribute after this entry becomes
'active' is greater than or equal to this threshold and the
associated ctpcStatStartupAlarm is equal to risingAlarm(1) or
risingOrFallingAlarm(3).
After a rising event is generated, another such event will not
be generated until the call period value of the corresponding
attribute falls below this threshold and reaches the
corresponding ctpcStatFallingThreshold.
If this object is not specified when the row is created,
default value based on the value of the corresponding
instance of ctpcStatMonitoredType may be set by the agent.
This object may not be modified if the associated
ctpcStatMonitoredStatus object is equal to
active(1)."
::= { ctpcStatMonitoredEntry 4 }
ctpcStatFallingThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the falling threshold of a monitoring
attribute.
When the call period value of the corresponding attribute
is less than or equal to this threshold,
[ and the value at the last sampling interval was greater than
this threshold, ]
a single event will be generated.
A single event will also be generated if the first call period
value of the corresponding attribute after this entry becomes
'active' is less than or equal to this threshold and the
associated ctpcStatStartupAlarm is equal to fallingAlarm(1) or
risingOrFallingAlarm(3).
After a falling event is generated, another such event will not
be generated until the call period value of the corresponding
attribute rises above this threshold and reaches the
corresponding ctpcStatRisingThreshold.
If this object is not specified when the row is created,
default value based on the value of the corresponding
instance of ctpcStatMonitoredType may be set by the agent.
This object may not be modified if the associated
ctpcStatMonitoredStatus object is equal to
active(1)."
::= { ctpcStatMonitoredEntry 5 }
ctpcStatStartupAlarm OBJECT-TYPE
SYNTAX CtpcStatAlarmMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the alarm that may be sent
after the entry is first set to valid.
If the first sample after this entry becomes valid is
greater than or equal to the ctpcStatRisingThreshold and
ctpcStatStartupAlarm is equal to risingAlarm(1) or
risingOrFallingAlarm(3), then a single rising alarm will be
generated.
If the first sample after this entry becomes valid is
less than or equal to the ctpcStatFallingThreshold and
ctpcStatStartupAlarm is equal to fallingAlarm(2) or
risingOrFallingAlarm(3), then a single falling alarm will be
generated.
This object may not be modified if the associated
ctpcStatMonitoredStatus object is equal to
active(1)."
DEFVAL { risingOrFallingAlarm }
::= { ctpcStatMonitoredEntry 6 }
ctpcStatMonitoredStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the status of ctpcStatMonitoredEntry.
Once the entry status is set to 'active', the call statistics
monitoring will be started.
If this object is set to 'notInService' or 'destroy', the
monitoring will be disabled to the corresponding stream type
on the corresponding monitoring attribute."
::= { ctpcStatMonitoredEntry 7 }
ctpcStatOverallCalls OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total number of calls since Telepresence
system was first in service.
When it reaches a maximum value of 2^32-1
(4294967295 decimal), it wraps around and starts increasing
again from '1'."
::= { ctpcStatObjects 1 }
ctpcStatOverallCallTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies elapsed time of calls
since Telepresence system was first in service.
When it reaches a maximum value of 2^32-1
(4294967295 decimal), it wraps around and starts increasing
again from '1'."
::= { ctpcStatObjects 2 }
ctpcStatTotalCalls OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies total number of calls since Telepresence
system was last rebooted.
When it reaches a maximum value of 2^32-1
(4294967295 decimal), it wraps around and starts increasing
again from '1'."
::= { ctpcStatObjects 3 }
ctpcStatTotalCallTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies elapsed time of calls
since Telepresence system was last rebooted.
When it reaches a maximum value of 2^32-1
(4294967295 decimal), it wraps around and starts increasing
again from '1'."
::= { ctpcStatObjects 4 }
ctpcSamplePeriod OBJECT-TYPE
SYNTAX Unsigned32 (10..300)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies a sample period by which the following
objects are based on:
ctpcAvgPeriodLatency,
ctpcMaxPeriodLatency,
ctpcTxPeriodLostPackets,
ctpcRxPeriodLostPackets,
ctpcAvgPeriodJitter,
ctpcMaxPeriodJitter"
DEFVAL { 10 }
::= { ctpcStatObjects 5 }
-- Call Table Configuration
ctpcTableSize OBJECT-TYPE
SYNTAX Integer32 (-1..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum number of entries of the
ctpcTable.
Some agents restrict the maximum value of this object to
be less than 500.
When the capacity of the ctpcTable has reached
the value specified by this object, then the agent
deletes the oldest entry in order to accommodate
the new entry.
When this object is set to '-1', ctpcTableSize will not set
maximum entries that ctpcTable is contained.
The table size in turns may be limited by the associated MIB
such as CISCO-TELEPRESENCE-MEETING-MIB."
DEFVAL { 10 }
::= { ctpcStatObjects 6 }
ctpcTableLastIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value of the ctpcIndex object
corresponding to the last entry added to the table.
When it reaches a maximum value of 2^32-1
(4294967295 decimal), it wraps around and starts increasing
again from '1'."
::= { ctpcStatObjects 7 }
-- Call Table
ctpcTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtpcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table for Telepresence call information.
After management system initialization (i.e. when
sysUpTime is reset to zero), this table
records all calls until it reaches its capacity
specifed in ctpcTableSize. Thereafter, it remains full
by retaining the most recent calls information."
::= { ctpcStatObjects 8 }
ctpcEntry OBJECT-TYPE
SYNTAX CtpcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains information of a Telepresence supported
call.
Some Telepresence systems support both audio-video call and
audio-addin call.
A management station wishing to create a call should create
the associated instance of the row status and the remote
directory number objects. ctpcIndex should be set to the
next-to-be-assigned number of ctpcTableLastIndex.
An instance of ctpcRemoteDirNum is required to create
a call.
Once the appropriate instance of all the configuration
objects have been created, the row status should be set
to active to initiate the request. Note that this entire
procedure may be initiated via a single set request which
specifies a row status of createAndGo.
Once a call entry has been activated, it cannot be stopped.
Instance of ctpcState on the created row reports the
latest status of the newly created call.
If a Telepresence system receives a call, a unique index will
be chosen and an entry will be created by the agent,
ctpcRowStatus will be set to active, and
ctpcRemoteDirNum will be filled by agent if it is known."
INDEX { ctpcIndex }
::= { ctpcTable 1 }
CtpcEntry ::= SEQUENCE {
ctpcIndex Unsigned32,
ctpcRemoteDirNum CtpcE164Address,
ctpcLocalSIPCallId SnmpAdminString,
ctpcTxDestAddrType InetAddressType,
ctpcTxDestAddr InetAddress,
ctpcStartDateAndTime DateAndTime,
ctpcDuration Unsigned32,
ctpcType INTEGER,
ctpcSecurity INTEGER,
ctpcDirection INTEGER,
ctpcState CtpcStateCode,
ctpcInitialBitRate Unsigned32,
ctpcLatestBitRate Unsigned32,
ctpcRowStatus RowStatus,
ctpcAttributes CtpcAttributes,
ctpcRemoteDevice CtpcRemoteDeviceType
}
ctpcIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies a unique identification of a call
entry.
If the chosen ctpcIndex value for the row creation
is already in use by an existing entry, SNMP SetRequest
to the ctpcIndex value will fail."
::= { ctpcEntry 1 }
ctpcRemoteDirNum OBJECT-TYPE
SYNTAX CtpcE164Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the remote directory number of a call.
Once the ctpcRowStatus is set to 'active', the
ctpcRemoteDirNum cannot be changed."
::= { ctpcEntry 2 }
ctpcLocalSIPCallId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the local SIP call ID."
REFERENCE
"RFC 3261 SIP: Session Initiation Protocol
Section 8.1.1.4"
::= { ctpcEntry 3 }
ctpcTxDestAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the address type of the corresponding
instance of ctpcTxDestAddr."
::= { ctpcEntry 4 }
ctpcTxDestAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the address of the media packets
forwarded to in the format given by the corresponding instance
of ctpcTxDestAddrType."
::= { ctpcEntry 5 }
ctpcStartDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value of local date and time when
a call is started."
::= { ctpcEntry 6 }
ctpcDuration OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the elapsed time since the call
established."
::= { ctpcEntry 7 }
ctpcType OBJECT-TYPE
SYNTAX INTEGER {
audioVideo(1),
audioOnly(2),
unknown(3) -- this value may be read
-- but not written.
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the call type.
audioVideo (1) -- Telepresence call.
audioOnly (2) -- Audio call.
unknown (3) -- The system cannot detect the type of a call.
Some Telepresence systems only support audio-video call."
::= { ctpcEntry 8 }
ctpcSecurity OBJECT-TYPE
SYNTAX INTEGER {
nonSecured(1),
authenticated(2),
secured(3),
unknown(4) -- this value may be read but
-- not written.
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the call security level.
nonSecured (1) --
Neither media packets nor signaling packets are encrypted.
authenticated (2) --
Signaling packets are authenticated and/or encrypted but
not the media packets.
secured (3) --
Both media packets and signaling packets are encrypted.
unknown (4) --
Cannot detect the security state of a call."
::= { ctpcEntry 9 }
ctpcDirection OBJECT-TYPE
SYNTAX INTEGER {
incoming(1),
outgoing(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the call direction.
incoming (1) -- The system received a call.
outgoing (2) -- The system initiated a call.
unknown (3) -- The system cannot detect the direction
-- of a call."
::= { ctpcEntry 10 }
ctpcState OBJECT-TYPE
SYNTAX CtpcStateCode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the call state."
::= { ctpcEntry 11 }
ctpcInitialBitRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the initial bit rate of a Telepresence
call."
::= { ctpcEntry 12 }
ctpcLatestBitRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the current bit rate of a call.
Telepresence call's bit rate may be lowered automatically
due to network congestion."
::= { ctpcEntry 13 }
ctpcRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the entry status of ctpcEntry.
Once ctpcRowStatus is set to 'active', the call creation
cannot be stopped.
Changing the value of this object from 'active' to
'notInService' or 'destroy' will likely have
consequences of call termination and/or losing the
call statistics information.
Thus, write access to this object is inappropriate for
most of the Telepresence systems, and many implementations
will choose not to support write-access for this object."
::= { ctpcEntry 14 }
ctpcAttributes OBJECT-TYPE
SYNTAX CtpcAttributes
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the connection mode of a call."
::= { ctpcEntry 15 }
ctpcRemoteDevice OBJECT-TYPE
SYNTAX CtpcRemoteDeviceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the remote device type."
::= { ctpcEntry 16 }
ctpcStatStreamTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtpcStatStreamTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of stream type information of a call."
::= { ctpcStatObjects 9 }
ctpcStatStreamTypeEntry OBJECT-TYPE
SYNTAX CtpcStatStreamTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains information on a particular stream type of
a call.
The entry will be deleted when the corresponding ctpcEntry
specified by ctpcIndex is removed."
INDEX {
ctpcIndex,
ctpcStreamType
}
::= { ctpcStatStreamTypeTable 1 }
CtpcStatStreamTypeEntry ::= SEQUENCE {
ctpcStreamType CtpcStreamMediaType,
ctpcAvgPeriodLatency Gauge32,
ctpcAvgCallLatency Gauge32,
ctpcMaxPeriodLatency Gauge32,
ctpcMaxCallLatency Gauge32,
ctpcMaxCallLatencyRecTime Unsigned32
}
ctpcStreamType OBJECT-TYPE
SYNTAX CtpcStreamMediaType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the call stream type."
::= { ctpcStatStreamTypeEntry 1 }
ctpcAvgPeriodLatency OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the average latency for the last
sample period specified in ctpcSamplePeriod.
When a call is terminated, the value will be reset to '0'."
::= { ctpcStatStreamTypeEntry 2 }
ctpcAvgCallLatency OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the average latency for the duration
of a call."
::= { ctpcStatStreamTypeEntry 3 }
ctpcMaxPeriodLatency OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the maximum latency among all the
sample periods.
When a call is terminated, the value will be reset to '0'."
::= { ctpcStatStreamTypeEntry 4 }
ctpcMaxCallLatency OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the maximum latency for the duration
of a call."
::= { ctpcStatStreamTypeEntry 5 }
ctpcMaxCallLatencyRecTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the elapsed time since the call is
established when the maximum latency of a call is recorded."
::= { ctpcStatStreamTypeEntry 6 }
ctpcStatStreamSourceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtpcStatStreamSourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table for call stream source information."
::= { ctpcStatObjects 10 }
ctpcStatStreamSourceEntry OBJECT-TYPE
SYNTAX CtpcStatStreamSourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains a stream source information of a call.
The entry will be deleted when the corresponding ctpcEntry
specified by ctpcIndex is removed."
INDEX {
ctpcIndex,
ctpcStreamType,
ctpcStreamSource
}
::= { ctpcStatStreamSourceTable 1 }
CtpcStatStreamSourceEntry ::= SEQUENCE {
ctpcStreamSource CtpcStreamSourceType,
ctpcTxActive TruthValue,
ctpcTxTotalBytes Counter64,
ctpcTxTotalPackets Counter64,
ctpcTxLostPackets Counter64,
ctpcTxPeriodLostPackets Gauge32,
ctpcTxCallLostPackets Gauge32,
ctpcTxIDRPackets Counter64,
ctpcTxShapingWindow Gauge32,
ctpcRxActive TruthValue,
ctpcRxTotalBytes Counter64,
ctpcRxTotalPackets Counter64,
ctpcRxLostPackets Counter64,
ctpcRxPeriodLostPackets Gauge32,
ctpcRxCallLostPackets Gauge32,
ctpcRxOutOfOrderPackets Counter64,
ctpcRxDuplicatePackets Counter64,
ctpcRxLatePackets Counter64,
ctpcRxIDRPackets Counter64,
ctpcRxShapingWindow Gauge32,
ctpcRxCallAuthFailure Counter64,
ctpcAvgPeriodJitter Unsigned64,
ctpcAvgCallJitter Unsigned64,
ctpcMaxPeriodJitter Unsigned64,
ctpcMaxCallJitter Unsigned64,
ctpcMaxCallJitterRecTime Unsigned32,
ctpcTxCodec CtpcCodecType,
ctpcTxFrameRate Unsigned32,
ctpcRxCodec CtpcCodecType,
ctpcRxFrameRate Unsigned32
}
ctpcStreamSource OBJECT-TYPE
SYNTAX CtpcStreamSourceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the call stream source."
::= { ctpcStatStreamSourceEntry 1 }
ctpcTxActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is set to 'true' if data transmit from a
stream source is 'active'."
::= { ctpcStatStreamSourceEntry 2 }
ctpcTxTotalBytes OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total number of bytes transmitted
from a stream source."
::= { ctpcStatStreamSourceEntry 3 }
ctpcTxTotalPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total number of packets transmitted
from a stream source."
::= { ctpcStatStreamSourceEntry 4 }
ctpcTxLostPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number packets failed to deliver
from a stream source."
::= { ctpcStatStreamSourceEntry 5 }
ctpcTxPeriodLostPackets OBJECT-TYPE
SYNTAX Gauge32 (0..100000000)
UNITS "micropercent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the micropercent of packets failed
to deliver from a stream source within the last sample
period specified in ctpcSamplePeriod.
When a call is terminated, the value will be reset to '0'."
::= { ctpcStatStreamSourceEntry 6 }
ctpcTxCallLostPackets OBJECT-TYPE
SYNTAX Gauge32 (0..100000000)
UNITS "micropercent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the micropercent of packets failed
to deliver from a stream source for the duration of
a call."
::= { ctpcStatStreamSourceEntry 7 }
ctpcTxIDRPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of IDR packets transmitted
from a stream source."
::= { ctpcStatStreamSourceEntry 8 }
ctpcTxShapingWindow OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the time span between the last
video packet and first video packet of a transmitted video
frame.
This object is only applicable for video stream type."
::= { ctpcStatStreamSourceEntry 9 }
ctpcRxActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is set to 'true' if data received by
a stream source is 'active'."
::= { ctpcStatStreamSourceEntry 10 }
ctpcRxTotalBytes OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total number of bytes received by
a stream source."
::= { ctpcStatStreamSourceEntry 11 }
ctpcRxTotalPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total number of packets received by
a stream source."
::= { ctpcStatStreamSourceEntry 12 }
ctpcRxLostPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number packets failed to reach
a stream source."
::= { ctpcStatStreamSourceEntry 13 }
ctpcRxPeriodLostPackets OBJECT-TYPE
SYNTAX Gauge32 (0..100000000)
UNITS "micropercent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the micropercent of packets failed
to reach a stream source within the last sample period
specified in ctpcSamplePeriod.
When a call is terminated, the value will be reset to '0'."
::= { ctpcStatStreamSourceEntry 14 }
ctpcRxCallLostPackets OBJECT-TYPE
SYNTAX Gauge32 (0..100000000)
UNITS "micropercent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the micropercent of packets failed
to reach a stream source."
::= { ctpcStatStreamSourceEntry 15 }
ctpcRxOutOfOrderPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number packets received out of
order by a stream source."
::= { ctpcStatStreamSourceEntry 16 }
ctpcRxDuplicatePackets OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number duplicated packets
received by a stream source."
::= { ctpcStatStreamSourceEntry 17 }
ctpcRxLatePackets OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number late packets
received by a stream source."
::= { ctpcStatStreamSourceEntry 18 }
ctpcRxIDRPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of IDR packets received
by a stream source."
::= { ctpcStatStreamSourceEntry 19 }
ctpcRxShapingWindow OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the time span between the last
video packet and first video packet of a received video frame.
This object is only applicable for video stream type."
::= { ctpcStatStreamSourceEntry 20 }
ctpcRxCallAuthFailure OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of authenticated packets
for which verification failed."
::= { ctpcStatStreamSourceEntry 21 }
ctpcAvgPeriodJitter OBJECT-TYPE
SYNTAX Unsigned64
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the average jitter of a call in the
last sample period specified in ctpcSamplePeriod.
When a call is terminated, the value will be reset to '0'."
::= { ctpcStatStreamSourceEntry 22 }
ctpcAvgCallJitter OBJECT-TYPE
SYNTAX Unsigned64
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the average jitter of a
stream source for a duration of a Telepresence call."
::= { ctpcStatStreamSourceEntry 23 }
ctpcMaxPeriodJitter OBJECT-TYPE
SYNTAX Unsigned64
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the maximum jitter of a
stream source for a Telepresence call
among all the sample periods.
When a call is terminated, the value will be reset to '0'."
::= { ctpcStatStreamSourceEntry 24 }
ctpcMaxCallJitter OBJECT-TYPE
SYNTAX Unsigned64
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the maximum jitter of a
stream source within a duration of a Telepresence call."
::= { ctpcStatStreamSourceEntry 25 }
ctpcMaxCallJitterRecTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the elapsed time since the call is
established when the maximum jitter of a stream source is
recorded."
::= { ctpcStatStreamSourceEntry 26 }
ctpcTxCodec OBJECT-TYPE
SYNTAX CtpcCodecType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the transmitted media codec type of a
stream source."
::= { ctpcStatStreamSourceEntry 27 }
ctpcTxFrameRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "millifps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the transmitted frame rate of a stream
source."
::= { ctpcStatStreamSourceEntry 28 }
ctpcRxCodec OBJECT-TYPE
SYNTAX CtpcCodecType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the received media codec type of a
stream source."
::= { ctpcStatStreamSourceEntry 29 }
ctpcRxFrameRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "millifps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the received frame rate of a stream
source."
::= { ctpcStatStreamSourceEntry 30 }
-- -
-- - Event History Group
-- -
ctpcStatEventHistTableSize OBJECT-TYPE
SYNTAX Unsigned32 (0..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the number of entries that the
ctpcStatEventHistoryTable can contain. When the
capacity of the ctpcStatEventHistoryTable has reached,
the value specified by this object, then the agent
deletes the oldest entry in order to accommodate
the new entry. A value of '0' prevents any history
from being retained."
DEFVAL { 10 }
::= { ctpcStatEventHistory 1 }
ctpcStatEventHistLastIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value of the
ctpcStatEventHistIndex object corresponding to the
last entry added to the table by the agent.
If the management client uses the notifications defined by
this module, then it can poll this object to determine
whether it has missed a notification sent by the agent."
::= { ctpcStatEventHistory 2 }
ctpcStatEventHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtpcStatEventHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a history of Telepresence
call monitoring thresholds crossed events.
After management system initialization (i.e. when
sysUpTime is reset to zero), this table
records all notifications until it reaches its
capacity specified in ctpcStatEventHistTableSize.
Thereafter, it remains full by retaining the most recent
notifications."
::= { ctpcStatEventHistory 3 }
ctpcStatEventHistoryEntry OBJECT-TYPE
SYNTAX CtpcStatEventHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains information about a Telepresence
call monitoring threshold crossed event."
INDEX { ctpcStatEventHistoryIndex }
::= { ctpcStatEventHistoryTable 1 }
CtpcStatEventHistoryEntry ::= SEQUENCE {
ctpcStatEventHistoryIndex Unsigned32,
ctpcStatEventMonObjectInst VariablePointer,
ctpcStatEventCrossedValue Unsigned64,
ctpcStatEventCrossedType CtpcStatThreshCrossedType,
ctpcStatEventTimeStamp TimeTicks
}
ctpcStatEventHistoryIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique non-zero integer value that identifies a
row in this table.
The value of this table starts from '1' and monotonically
increases for each threshold crossed event
received by the agent. If the value of this object is
'4294967295', the agent will reset it to '1' upon receiving the
next event."
::= { ctpcStatEventHistoryEntry 1 }
ctpcStatEventMonObjectInst OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies a complete OID of a
monitoring object which was crossed.
For example, the OID of ctpcAvgPeriodLatency.1.video
would represent video latency of a call with
call index '1' crossed the threshold set by the corresponding
ctpcStatMonitoredEntry."
::= { ctpcStatEventHistoryEntry 2 }
ctpcStatEventCrossedValue OBJECT-TYPE
SYNTAX Unsigned64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value of monitoring object
when the threshold was crossed."
::= { ctpcStatEventHistoryEntry 3 }
ctpcStatEventCrossedType OBJECT-TYPE
SYNTAX CtpcStatThreshCrossedType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the type of threshold which
was crossed and thereby triggered this event."
::= { ctpcStatEventHistoryEntry 4 }
ctpcStatEventTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value of the sysUpTime object at the
time the notification was generated."
::= { ctpcStatEventHistoryEntry 5 }
ctpcMgmtSysConnEventHistTableSize OBJECT-TYPE
SYNTAX Unsigned32 (0..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the number of entries that the
ctpcMgmtSysConnEventHistoryTable can contain. When the
capacity of the ctpcMgmtSysConnEventHistoryTable has reached,
the value specified by this object, then the agent
deletes the oldest entry in order to accommodate
the new entry. A value of '0' prevents any history
from being retained.
Some agents restrict the maximum value of this object to
be less than 500."
DEFVAL { 10 }
::= { ctpcMgmtSysConnEventHistory 1 }
ctpcMgmtSysConnEventHistLastIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value of the
ctpcMgmtSysConnEventHistIndex object corresponding to the
last entry added to the table by the agent.
If the management client uses the notifications defined by
this module, then it can poll this object to determine
whether it has missed a notification sent by the agent."
::= { ctpcMgmtSysConnEventHistory 2 }
ctpcMgmtSysConnEventHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtpcMgmtSysConnEventHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a history of call management system
connection state changes.
After management system initialization (i.e. when
sysUpTime is reset to zero), this table
records all notifications until it reaches its
capacity specified in ctpcMgmtSysConnEventHistTableSize.
Thereafter, it remains full by retaining the most recent
notifications."
::= { ctpcMgmtSysConnEventHistory 3 }
ctpcMgmtSysConnEventHistoryEntry OBJECT-TYPE
SYNTAX CtpcMgmtSysConnEventHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains information about a call management
system connection state change event."
INDEX { ctpcMgmtSysConnEventHistoryIndex }
::= { ctpcMgmtSysConnEventHistoryTable 1 }
CtpcMgmtSysConnEventHistoryEntry ::= SEQUENCE {
ctpcMgmtSysConnEventHistoryIndex Unsigned32,
ctpcMgmtSysConnEventStatus CtpcMgmtSysConnStatusCode,
ctpcMgmtSysConnEventSIPRespCode Unsigned32,
ctpcMgmtSysConnEventTimeStamp TimeTicks
}
ctpcMgmtSysConnEventHistoryIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique non-zero integer value that identifies a
row in this table.
The value of this table starts from '1' and monotonically
increases for each management system connection event
received by the agent. If the value of this object is
'4294967295', the agent will reset it to '1' upon receiving the
next event."
::= { ctpcMgmtSysConnEventHistoryEntry 1 }
ctpcMgmtSysConnEventStatus OBJECT-TYPE
SYNTAX CtpcMgmtSysConnStatusCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies a call management system
connection state when the event happened."
::= { ctpcMgmtSysConnEventHistoryEntry 2 }
ctpcMgmtSysConnEventSIPRespCode OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies SIP response code from
call management system when the event happened."
REFERENCE "RFC 3261, section 21"
::= { ctpcMgmtSysConnEventHistoryEntry 3 }
ctpcMgmtSysConnEventTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value of the sysUpTime object at the
time the notification was generated."
::= { ctpcMgmtSysConnEventHistoryEntry 4 }
-- Telepresence Call Notifiations
ctpcMgmtSysConnFailNotification NOTIFICATION-TYPE
OBJECTS {
ctpcMgmtSysAddrType,
ctpcMgmtSysAddr
}
STATUS deprecated
DESCRIPTION
"This notification is sent when a call management system
connection failure occurs.
This notification is deprecated in favor of
ctpcMgmtSysConnEventNotification."
::= { ciscoTelepresenceCallMIBNotifs 1 }
ctpcStatNotificaion NOTIFICATION-TYPE
OBJECTS {
ctpcStatEventMonObjectInst,
ctpcStatEventCrossedValue,
ctpcStatEventCrossedType
}
STATUS current
DESCRIPTION
"This notification is sent when a call monitoring threshold is
crossed."
::= { ciscoTelepresenceCallMIBNotifs 2 }
ctpcMgmtSysConnEventNotification NOTIFICATION-TYPE
OBJECTS {
ctpcMgmtSysAddrType,
ctpcMgmtSysAddr,
ctpcMgmtSysConnStatus,
ctpcMgmtSysSIPRespCode
}
STATUS current
DESCRIPTION
"This notification is sent when a call management system
connection state change occurs."
::= { ciscoTelepresenceCallMIBNotifs 3 }
-- Conformance
ciscoTpCallMIBCompliances OBJECT IDENTIFIER
::= { ciscoTelepresenceCallMIBConform 1 }
ciscoTpCallMIBGroups OBJECT IDENTIFIER
::= { ciscoTelepresenceCallMIBConform 2 }
ciscoTpCallMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement the Cisco
Telepresence Call MIB."
MODULE -- this module
MANDATORY-GROUPS {
ciscoTpCallInformationGroup,
ciscoTpCallStatisticsGroup
}
GROUP ciscoTpCallConfigurationGroup
DESCRIPTION
"The Telepresence Call Configuration Group is optional."
GROUP ciscoTpCallEventHistoryGroup
DESCRIPTION
"The Telepresence Call Event History Group is optional."
GROUP ciscoTpCallNotificationGroup
DESCRIPTION
"The Telepresence Call Notification Group is optional."
OBJECT ctpcStatNotifyEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpcMgmtSysConnNotifyEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpcSamplePeriod
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpcTableSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpcType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpcSecurity
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpcInitialBitRate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpcRowStatus
SYNTAX INTEGER {
active(1)
}
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the ctpcRowStatus is not
required.
Support of the values notInService(2), notReady(3),
createAndGo(4), createAndWait(5), and destroy(6) are not
required."
OBJECT ctpcState
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpcStatEventHistTableSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoTpCallMIBCompliances 1 }
ciscoTpCallMIBComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the Cisco
Telepresence Call MIB."
MODULE -- this module
MANDATORY-GROUPS {
ciscoTpCallInformationGroup,
ciscoTpCallInformationGroupSup1,
ciscoTpCallStatisticsGroup,
ciscoTpCallStatisticsGroupSup1
}
GROUP ciscoTpCallConfigurationGroup
DESCRIPTION
"The Telepresence Call Configuration Group is optional."
GROUP ciscoTpCallEventHistoryGroup
DESCRIPTION
"The Telepresence Call Event History Group is optional."
GROUP ciscoTpCallMgmtSysConnEventHistGroup
DESCRIPTION
"The Call Management System Connection Event History Group
is optional."
GROUP ciscoTpCallNotificationGroup
DESCRIPTION
"The Telepresence Call Notification Group is optional."
OBJECT ctpcStatNotifyEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpcMgmtSysConnNotifyEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpcSamplePeriod
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpcTableSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpcType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpcSecurity
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpcInitialBitRate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpcRowStatus
SYNTAX INTEGER {
active(1)
}
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the ctpcRowStatus is not
required.
Support of the values notInService(2), notReady(3),
createAndGo(4), createAndWait(5), and destroy(6) are not
required."
OBJECT ctpcState
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpcStatEventHistTableSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctpcMgmtSysConnEventHistTableSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoTpCallMIBCompliances 2 }
-- Units of Conformance
ciscoTpCallConfigurationGroup OBJECT-GROUP
OBJECTS {
ctpcStatNotifyEnable,
ctpcMgmtSysConnNotifyEnable,
ctpcStatMonitoredUnit,
ctpcStatRisingThreshold,
ctpcStatFallingThreshold,
ctpcStatStartupAlarm,
ctpcStatMonitoredStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing the call event monitoring and
notification configuration."
::= { ciscoTpCallMIBGroups 1 }
ciscoTpCallInformationGroup OBJECT-GROUP
OBJECTS {
ctpcLocalDirNum,
ctpcLocalAddrType,
ctpcLocalAddr,
ctpcActiveMgmtSysIndex,
ctpcMode,
ctpcMgmtSysAddrType,
ctpcMgmtSysAddr
}
STATUS current
DESCRIPTION
"A collection of objects providing call management system
information as well as system caller ID information."
::= { ciscoTpCallMIBGroups 2 }
ciscoTpCallStatisticsGroup OBJECT-GROUP
OBJECTS {
ctpcStatOverallCalls,
ctpcStatOverallCallTime,
ctpcStatTotalCalls,
ctpcStatTotalCallTime,
ctpcSamplePeriod,
ctpcTableSize,
ctpcTableLastIndex,
ctpcRemoteDirNum,
ctpcLocalSIPCallId,
ctpcTxDestAddrType,
ctpcTxDestAddr,
ctpcStartDateAndTime,
ctpcDuration,
ctpcType,
ctpcSecurity,
ctpcDirection,
ctpcState,
ctpcInitialBitRate,
ctpcLatestBitRate,
ctpcRowStatus,
ctpcAvgPeriodLatency,
ctpcAvgCallLatency,
ctpcMaxPeriodLatency,
ctpcMaxCallLatency,
ctpcMaxCallLatencyRecTime,
ctpcTxActive,
ctpcTxTotalBytes,
ctpcTxTotalPackets,
ctpcTxLostPackets,
ctpcTxPeriodLostPackets,
ctpcTxCallLostPackets,
ctpcTxIDRPackets,
ctpcTxShapingWindow,
ctpcRxActive,
ctpcRxTotalBytes,
ctpcRxTotalPackets,
ctpcRxLostPackets,
ctpcRxPeriodLostPackets,
ctpcRxCallLostPackets,
ctpcRxOutOfOrderPackets,
ctpcRxDuplicatePackets,
ctpcRxLatePackets,
ctpcRxIDRPackets,
ctpcRxShapingWindow,
ctpcRxCallAuthFailure,
ctpcAvgPeriodJitter,
ctpcAvgCallJitter,
ctpcMaxPeriodJitter,
ctpcMaxCallJitter,
ctpcMaxCallJitterRecTime
}
STATUS current
DESCRIPTION
"A collection of objects providing Telepresence
call's statistical information."
::= { ciscoTpCallMIBGroups 3 }
ciscoTpCallEventHistoryGroup OBJECT-GROUP
OBJECTS {
ctpcStatEventHistTableSize,
ctpcStatEventHistLastIndex,
ctpcStatEventMonObjectInst,
ctpcStatEventCrossedValue,
ctpcStatEventCrossedType,
ctpcStatEventTimeStamp
}
STATUS current
DESCRIPTION
"A collection of objects providing Telepresence
call monitoring crossed event information."
::= { ciscoTpCallMIBGroups 4 }
ciscoTpCallNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ctpcMgmtSysConnFailNotification,
ctpcStatNotificaion
}
STATUS deprecated
DESCRIPTION
"A collection of event notifications."
::= { ciscoTpCallMIBGroups 5 }
ciscoTpCallMgmtSysConnEventHistGroup OBJECT-GROUP
OBJECTS {
ctpcMgmtSysConnEventHistTableSize,
ctpcMgmtSysConnEventHistLastIndex,
ctpcMgmtSysConnEventStatus,
ctpcMgmtSysConnEventSIPRespCode,
ctpcMgmtSysConnEventTimeStamp
}
STATUS current
DESCRIPTION
"A collection of objects providing call management
system connection changes event information."
::= { ciscoTpCallMIBGroups 6 }
ciscoTpCallInformationGroupSup1 OBJECT-GROUP
OBJECTS {
ctpcMgmtSysConnStatus,
ctpcMgmtSysSIPRespCode
}
STATUS current
DESCRIPTION
"A supplemental group of ciscoTpCallInformationGroup."
::= { ciscoTpCallMIBGroups 7 }
ciscoTpCallStatisticsGroupSup1 OBJECT-GROUP
OBJECTS {
ctpcAttributes,
ctpcRemoteDevice,
ctpcTxCodec,
ctpcTxFrameRate,
ctpcRxCodec,
ctpcRxFrameRate
}
STATUS current
DESCRIPTION
"A supplemental group of ciscoTpCallStatisticsGroup."
::= { ciscoTpCallMIBGroups 8 }
ciscoTpCallNotificationGroupRev1 NOTIFICATION-GROUP
NOTIFICATIONS {
ctpcMgmtSysConnEventNotification,
ctpcStatNotificaion
}
STATUS current
DESCRIPTION
"A collection of event notifications."
::= { ciscoTpCallMIBGroups 9 }
END
Reference in New Issue View Git Blame Copy Permalink