MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

2129 lines
71 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB.my
--
-- Copyright (c) 2007-2008 by cisco Systems Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Counter64,
Gauge32,
Counter32,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
TEXTUAL-CONVENTION
FROM SNMPv2-TC
EntPhysicalIndexOrZero
FROM CISCO-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoSbcCallStatsMIB MODULE-IDENTITY
LAST-UPDATED "200808270000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: sbc-dev@cisco.com"
DESCRIPTION
"The main purpose of this MIB is to define the statistics
information for Session Border Controller application. The
statistics are mainly of two types - Call statistics and
Media statistics. The calls can further be categorized as SIP
calls and H.248 calls.
This MIB categorizes the statistics information into following
four types:
1. Global call statistics - Represents the global call related
statistics like call rates, media flows, signaling flows
etc.
2. Periodic statistics - Represents the SBC call statistics
information for a particular time interval like current 5
minutes, previous 5 minutes, current 15 minutes, previous 15
minutes, current hour and previous hour.
3. Per flow statistics - Represents the SBC media flow
statistics. These are media statistics for each of the
current ongoing call flow.
4. H.248 statistics - Represents the H.248 call related
statistics information when H.248 controller is associated
with SBC.
The Session Border Controller (SBC) enables direct IP-to-IP
interconnect between multiple administrative domains for
session-based services providing protocol inter-working,
security, and admission control and management. The SBC is a
voice over IP (VoIP) device that sits on the border of a
network and controls call admission to that network.
The primary purpose of an SBC is to protect the interior of the
network from excessive call load and malicious traffic.
Additional functions provided by the SBC include media bridging
and billing services.
GLOSSARY
SBC: Session Border Controller
CSB: CISCO Session Border Controller
CAC: Call Admission Control - protects voice traffic from the
negative effects of other voice traffic and to keep excess
voice traffic off the network. It is used to prevent congestion
in Voice traffic. It is used in the Call Setup phase.
RTP: Real Time Transport Protocol - defines a standardized
packet format for delivering audio and video over the Internet.
RTCP: Real Time Control Protocol - It is a sister protocol of
the Real-time Transport Protocol (RTP). RTCP provides
out-of-band control information for an RTP flow. It partners
RTP in the delivery and packaging of multimedia data, but does
not transport any data itself. It is used periodically to
transmit control packets to participants in a streaming
multimedia session.
VMG: Virtual Media Gateway - introduced to bridge between
different transmission technologies and to add service to
end-user connections. Its architecture separates control and
connectivity functions into physically separate network layers.
VPN: Virtual Private Network - It is a communications network
tunneled through another network, and dedicated for a specific
network.
Gate Id - Context Identifiers assigned uniquely to a SIP/H.248
call flows.
Flow Pair Id: Stream Identifiers assigned uniquely to a
SIP/H.248 call flows.
Adjacency: An adjacency contains the system information to be
transmitted to next HOP.
REFERENCES
1. CISCO Session Border Controller Documents and FAQ
http://zed.cisco.com/confluence/display/SBC/SBC"
REVISION "200808270000Z"
DESCRIPTION
"Updated description for following objects
csbPerFlowStatsRTCPPktsSent
csbPerFlowStatsRTCPPktsRcvd
csbPerFlowStatsRTCPPktsLost
Deprecated the csbH248StatsTable and replaced it with
csbH248StatsRev1Table to correct problem with index."
REVISION "200805290000Z"
DESCRIPTION
"Initial version of the MIB module."
::= { ciscoMgmt 657 }
CiscoSbcPeriodicStatsInterval ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention represents the interval values for
which the periodic stats and history stats are to be displayed.
fiveMinute - Inerval to display current/previous 5 minutes
statistics information.
fifteenMinute - Inerval to display current/previous 15 minutes
statistics information.
oneHour - Inerval to display current/previous one hour
statistics information."
SYNTAX INTEGER {
fiveMinute(1),
fifteenMinute(2),
oneHour(3)
}
ciscoSbcCallStatsMIBNotifs OBJECT IDENTIFIER
::= { ciscoSbcCallStatsMIB 0 }
ciscoSbcCallStatsMIBObjects OBJECT IDENTIFIER
::= { ciscoSbcCallStatsMIB 1 }
ciscoSbcCallStatsMIBConform OBJECT IDENTIFIER
::= { ciscoSbcCallStatsMIB 2 }
csbCallStatsInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CsbCallStatsInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The call stats instance table contains the physical index for
each of the physical entity (line card, primary, secondary
cards). The index of the table is instance index which uniquely
identifies the physical entity present on the box."
::= { ciscoSbcCallStatsMIBObjects 1 }
csbCallStatsInstanceEntry OBJECT-TYPE
SYNTAX CsbCallStatsInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in csbCallStatsInstanceTable. There is an
entry in this table for each SBC instance, as identified by a
value of csbCallStatsInstanceIndex."
INDEX { csbCallStatsInstanceIndex }
::= { csbCallStatsInstanceTable 1 }
CsbCallStatsInstanceEntry ::= SEQUENCE {
csbCallStatsInstanceIndex Unsigned32,
csbCallStatsInstancePhysicalIndex EntPhysicalIndexOrZero
}
csbCallStatsInstanceIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely identifies the sequence number of an
entity or slot that is configured per device. This index is
assigned arbitrarily by the engine and is not saved over
reboots."
::= { csbCallStatsInstanceEntry 1 }
csbCallStatsInstancePhysicalIndex OBJECT-TYPE
SYNTAX EntPhysicalIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the physical entity for which all the
measurements are maintained. The exact type of this
entity is described by its entPhysicalVendorType value."
::= { csbCallStatsInstanceEntry 2 }
csbCallStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CsbCallStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the global statistics information in the
form of a table which contains call specific information like
call rates, media flows, signaling flows etc. The index of the
table is service index which corresponds to a particular
service configured on the SBC and all the rows of the table
represents the global information regarding all the call flows
related to that particular service. The other index of this
tbale is csbCallStatsInstanceIndex which is defined in
csbCallStatsInstanceTable."
::= { ciscoSbcCallStatsMIBObjects 2 }
csbCallStatsEntry OBJECT-TYPE
SYNTAX CsbCallStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An conceptual row in the csbCallStatsGlobalStatsTable. There is
an entry in this table for the particular service configured on
SBC identified by a value of csbCallStatsInstanceIndex. The
other index of this tbale is csbCallStatsInstanceIndex which is
defined in csbCallStatsInstanceTable."
INDEX {
csbCallStatsInstanceIndex,
csbCallStatsServiceIndex
}
::= { csbCallStatsTable 1 }
CsbCallStatsEntry ::= SEQUENCE {
csbCallStatsServiceIndex Unsigned32,
csbCallStatsSbcName SnmpAdminString,
csbCallStatsCallsHigh Unsigned32,
csbCallStatsRate1Sec Gauge32,
csbCallStatsCallsLow Unsigned32,
csbCallStatsAvailableFlows Gauge32,
csbCallStatsUsedFlows Gauge32,
csbCallStatsPeakFlows Unsigned32,
csbCallStatsTotalFlows Unsigned32,
csbCallStatsUsedSigFlows Gauge32,
csbCallStatsPeakSigFlows Unsigned32,
csbCallStatsTotalSigFlows Unsigned32,
csbCallStatsAvailablePktRate Gauge32,
csbCallStatsUnclassifiedPkts Counter64,
csbCallStatsRTPPktsSent Counter64,
csbCallStatsRTPPktsRcvd Counter64,
csbCallStatsRTPPktsDiscard Counter64,
csbCallStatsRTPOctetsSent Counter64,
csbCallStatsRTPOctetsRcvd Counter64,
csbCallStatsRTPOctetsDiscard Counter64,
csbCallStatsNoMediaCount Counter32,
csbCallStatsRouteErrors Counter32
}
csbCallStatsServiceIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the index of the name of the SBC
service configured. This object also acts as an index for the
table."
::= { csbCallStatsEntry 1 }
csbCallStatsSbcName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the configured name of the SBC service.
The length of this object is zero when value is not assigned
to it."
::= { csbCallStatsEntry 2 }
csbCallStatsCallsHigh OBJECT-TYPE
SYNTAX Unsigned32
UNITS "calls per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum number of calls per second
processed by the Session Border Controller in past 24 hours."
::= { csbCallStatsEntry 3 }
csbCallStatsRate1Sec OBJECT-TYPE
SYNTAX Gauge32
UNITS "calls per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the average calls per second processed by
the Session Border Controller."
::= { csbCallStatsEntry 4 }
csbCallStatsCallsLow OBJECT-TYPE
SYNTAX Unsigned32
UNITS "calls per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the minimum calls per second in past 24
hours."
::= { csbCallStatsEntry 5 }
csbCallStatsAvailableFlows OBJECT-TYPE
SYNTAX Gauge32
UNITS "flows"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of media flows which are
available."
::= { csbCallStatsEntry 6 }
csbCallStatsUsedFlows OBJECT-TYPE
SYNTAX Gauge32
UNITS "flows"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of media flows which are
used. This is for the flow allocated and connected. The flow
allocated but not connected is not counted."
::= { csbCallStatsEntry 7 }
csbCallStatsPeakFlows OBJECT-TYPE
SYNTAX Unsigned32
UNITS "flows"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of peak flows in SBC.
This is the highest recorded value for the active flows since
the box was booted/reseted."
::= { csbCallStatsEntry 8 }
csbCallStatsTotalFlows OBJECT-TYPE
SYNTAX Unsigned32
UNITS "flows"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of media support by this
instance of SBC. The total number of flows include the
available
flows and the active flows. This value is since box was
booted/reseted. Total flows include the active flows and the
flows allocated but not connected."
::= { csbCallStatsEntry 9 }
csbCallStatsUsedSigFlows OBJECT-TYPE
SYNTAX Gauge32
UNITS "signal flows"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of active signaling flows for
signaling pinholes."
::= { csbCallStatsEntry 10 }
csbCallStatsPeakSigFlows OBJECT-TYPE
SYNTAX Unsigned32
UNITS "signal flows"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the peak signaling flow in SBC.
This is the highest recorded value for the active signaling
flows. This object is calculated using csbCallStatsUsedFlows."
::= { csbCallStatsEntry 11 }
csbCallStatsTotalSigFlows OBJECT-TYPE
SYNTAX Unsigned32
UNITS "signal flows"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum number of Signalling Flows
that can be supported by this instance of SBC."
::= { csbCallStatsEntry 12 }
csbCallStatsAvailablePktRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the remaining capacity that can be
supported by SBC."
::= { csbCallStatsEntry 13 }
csbCallStatsUnclassifiedPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of unclassified packets
processed by SBC."
::= { csbCallStatsEntry 14 }
csbCallStatsRTPPktsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of RTP packets sent."
::= { csbCallStatsEntry 15 }
csbCallStatsRTPPktsRcvd OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of RTP packets
received."
::= { csbCallStatsEntry 16 }
csbCallStatsRTPPktsDiscard OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of RTP packets
discarded."
::= { csbCallStatsEntry 17 }
csbCallStatsRTPOctetsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of RTP octets sent by the
SBC."
::= { csbCallStatsEntry 18 }
csbCallStatsRTPOctetsRcvd OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of RTP octets received by
the SBC."
::= { csbCallStatsEntry 19 }
csbCallStatsRTPOctetsDiscard OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of RTP octets discarded by
the SBC."
::= { csbCallStatsEntry 20 }
csbCallStatsNoMediaCount OBJECT-TYPE
SYNTAX Counter32
UNITS "no media events"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object indicates the accumulated No media event
count."
::= { csbCallStatsEntry 21 }
csbCallStatsRouteErrors OBJECT-TYPE
SYNTAX Counter32
UNITS "route error events"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object indicates the accumulated Route error event
count. This counter is for the route error of media stream."
::= { csbCallStatsEntry 22 }
csbCurrPeriodicStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CsbCurrPeriodicStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to collect measurement over several
different intervals as defined by the
csbCurrPeriodicStatsInterval object. When a new interval starts
the objects associated with the interval are reset and count up
throughout the interval. The index of the table is the interval
for which the stats information is to be displayed. The
interval
values can be 5 min, 15 mins, 1 hour. The other indices of this
tbale are csbCallStatsInstanceIndex defined in
csbCallStatsInstanceTable and csbCallStatsServiceIndex defined
in csbCallStatsTable."
::= { ciscoSbcCallStatsMIBObjects 3 }
csbCurrPeriodicStatsEntry OBJECT-TYPE
SYNTAX CsbCurrPeriodicStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An conceptual row in the csbCurrPeriodicStatsTable. There is
an entry in this table for the particular controller by a value
of csbH248StatsCtrlrIndex. The other indices of this table are
csbCallStatsInstanceIndex defined in csbCallStatsInstanceTable
and csbCallStatsServiceIndex defined in csbCallStatsTable."
INDEX {
csbCallStatsInstanceIndex,
csbCallStatsServiceIndex,
csbCurrPeriodicStatsInterval
}
::= { csbCurrPeriodicStatsTable 1 }
CsbCurrPeriodicStatsEntry ::= SEQUENCE {
csbCurrPeriodicStatsInterval CiscoSbcPeriodicStatsInterval,
csbCurrPeriodicStatsActiveCalls Gauge32,
csbCurrPeriodicStatsActivatingCalls Gauge32,
csbCurrPeriodicStatsDeactivatingCalls Gauge32,
csbCurrPeriodicStatsTotalCallAttempts Gauge32,
csbCurrPeriodicStatsFailedCallAttempts Gauge32,
csbCurrPeriodicStatsCallRoutingFailure Gauge32,
csbCurrPeriodicStatsCallResourceFailure Gauge32,
csbCurrPeriodicStatsCallMediaFailure Gauge32,
csbCurrPeriodicStatsCallSigFailure Gauge32,
csbCurrPeriodicStatsActiveCallFailure Gauge32,
csbCurrPeriodicStatsCongestionFailure Gauge32,
csbCurrPeriodicStatsCallSetupPolicyFailure Gauge32,
csbCurrPeriodicStatsCallSetupNAPolicyFailure Gauge32,
csbCurrPeriodicStatsCallSetupRoutingPolicyFailure Gauge32,
csbCurrPeriodicStatsCallSetupCACPolicyFailure Gauge32,
csbCurrPeriodicStatsCallSetupCACCallLimitFailure Gauge32,
csbCurrPeriodicStatsCallSetupCACRateLimitFailure Gauge32,
csbCurrPeriodicStatsCallSetupCACBandwidthFailure Gauge32,
csbCurrPeriodicStatsCallSetupCACMediaLimitFailure Gauge32,
csbCurrPeriodicStatsCallSetupCACMediaUpdateFailure Gauge32,
csbCurrPeriodicStatsTimestamp OCTET STRING
}
csbCurrPeriodicStatsInterval OBJECT-TYPE
SYNTAX CiscoSbcPeriodicStatsInterval
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the interval for which the periodic
statistics information is to be displayed. The interval
values can be 5 min, 15 mins, 1 hour. This object acts as index
for the table."
::= { csbCurrPeriodicStatsEntry 1 }
csbCurrPeriodicStatsActiveCalls OBJECT-TYPE
SYNTAX Gauge32
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of calls that have become
active during this interval."
::= { csbCurrPeriodicStatsEntry 2 }
csbCurrPeriodicStatsActivatingCalls OBJECT-TYPE
SYNTAX Gauge32
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of calls that have become
activing during this interval."
::= { csbCurrPeriodicStatsEntry 3 }
csbCurrPeriodicStatsDeactivatingCalls OBJECT-TYPE
SYNTAX Gauge32
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of calls that have become
deactiving during this interval."
::= { csbCurrPeriodicStatsEntry 4 }
csbCurrPeriodicStatsTotalCallAttempts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of total call attempts during
this interval."
::= { csbCurrPeriodicStatsEntry 5 }
csbCurrPeriodicStatsFailedCallAttempts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of failed call attempts during
this interval."
::= { csbCurrPeriodicStatsEntry 6 }
csbCurrPeriodicStatsCallRoutingFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to routing failures during this interval."
::= { csbCurrPeriodicStatsEntry 7 }
csbCurrPeriodicStatsCallResourceFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to resource failures during this interval."
::= { csbCurrPeriodicStatsEntry 8 }
csbCurrPeriodicStatsCallMediaFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to media failure during this interval."
::= { csbCurrPeriodicStatsEntry 9 }
csbCurrPeriodicStatsCallSigFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to signaling failure during this interval."
::= { csbCurrPeriodicStatsEntry 10 }
csbCurrPeriodicStatsActiveCallFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of active call failures during
this interval."
::= { csbCurrPeriodicStatsEntry 11 }
csbCurrPeriodicStatsCongestionFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to congestion during this interval."
::= { csbCurrPeriodicStatsEntry 12 }
csbCurrPeriodicStatsCallSetupPolicyFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to policy failure during this interval."
::= { csbCurrPeriodicStatsEntry 13 }
csbCurrPeriodicStatsCallSetupNAPolicyFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to NA policy failure during this interval."
::= { csbCurrPeriodicStatsEntry 14 }
csbCurrPeriodicStatsCallSetupRoutingPolicyFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to routing policy failure during this interval."
::= { csbCurrPeriodicStatsEntry 15 }
csbCurrPeriodicStatsCallSetupCACPolicyFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to CAC policy failure during this interval."
::= { csbCurrPeriodicStatsEntry 16 }
csbCurrPeriodicStatsCallSetupCACCallLimitFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to CAC call limit during this interval."
::= { csbCurrPeriodicStatsEntry 17 }
csbCurrPeriodicStatsCallSetupCACRateLimitFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to CAC call rate limit during this interval."
::= { csbCurrPeriodicStatsEntry 18 }
csbCurrPeriodicStatsCallSetupCACBandwidthFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to CAC bandwidth limit during this interval."
::= { csbCurrPeriodicStatsEntry 19 }
csbCurrPeriodicStatsCallSetupCACMediaLimitFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to CAC media limit during this interval."
::= { csbCurrPeriodicStatsEntry 20 }
csbCurrPeriodicStatsCallSetupCACMediaUpdateFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call update failure due
to policy failure during this interval."
::= { csbCurrPeriodicStatsEntry 21 }
csbCurrPeriodicStatsTimestamp OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current time at the start of each
interval."
::= { csbCurrPeriodicStatsEntry 22 }
csbHistoryStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CsbHistoryStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provide historical measurement in various interval
length defined by the csbHistoryStatsInterval object. Each
interval may contain one or more entries to allow for detailed
measurment to be collected. It is up to the platform to
determine the number of intervals to be supported like
5 minutes, 15 minutes and 1 hour. In addition, the number of
historical entries is also determined by the platform
resources."
::= { ciscoSbcCallStatsMIBObjects 4 }
csbHistoryStatsEntry OBJECT-TYPE
SYNTAX CsbHistoryStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the csbHistoryStatsTable. The entries in
this table are updated as interval completes in the
csbCurrPeriodicStatsTable table and the data is moved from that
table to this one."
INDEX {
csbCallStatsInstanceIndex,
csbCallStatsServiceIndex,
csbHistoryStatsInterval,
csbHistoryStatsElements
}
::= { csbHistoryStatsTable 1 }
CsbHistoryStatsEntry ::= SEQUENCE {
csbHistoryStatsInterval CiscoSbcPeriodicStatsInterval,
csbHistoryStatsElements Unsigned32,
csbHistoryStatsActiveCalls Gauge32,
csbHistoryStatsTotalCallAttempts Gauge32,
csbHistoryStatsFailedCallAttempts Gauge32,
csbHistoryStatsCallRoutingFailure Gauge32,
csbHistoryStatsCallResourceFailure Gauge32,
csbHistoryStatsCallMediaFailure Gauge32,
csbHistoryStatsFailSigFailure Gauge32,
csbHistoryStatsActiveCallFailure Gauge32,
csbHistoryStatsCongestionFailure Gauge32,
csbHistoryStatsCallSetupPolicyFailure Gauge32,
csbHistoryStatsCallSetupNAPolicyFailure Gauge32,
csbHistoryStatsCallSetupRoutingPolicyFailure Gauge32,
csbHistoryStatsCallSetupCACPolicyFailure Gauge32,
csbHistoryStatsCallSetupCACCallLimitFailure Gauge32,
csbHistoryStatsCallSetupCACRateLimitFailure Gauge32,
csbHistoryStatsCallSetupCACBandwidthFailure Gauge32,
csbHistoryStatsCallSetupCACMediaLimitFailure Gauge32,
csbHistoryStatsCallSetupCACMediaUpdateFailure Gauge32,
csbHistoryStatsTimestamp OCTET STRING
}
csbHistoryStatsInterval OBJECT-TYPE
SYNTAX CiscoSbcPeriodicStatsInterval
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the interval for which the history
statistics information is to be displayed. The interval
values can be 5 min, 15 mins, 1 hour. This object acts as index
for the table."
::= { csbHistoryStatsEntry 1 }
csbHistoryStatsElements OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The platform assigns a number starting with one and
increments it each for each new row. When the maximum
number of row is reached the oldest rows are deleted. It is up
to the platform to determine the number of entries for each
interval. It is recommended that each platform support at least
one entry for 5 min, 15 mins, and 1 hour intervals."
::= { csbHistoryStatsEntry 2 }
csbHistoryStatsActiveCalls OBJECT-TYPE
SYNTAX Gauge32
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of active calls history during
this interval."
::= { csbHistoryStatsEntry 3 }
csbHistoryStatsTotalCallAttempts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of total call attempts history
during this interval."
::= { csbHistoryStatsEntry 4 }
csbHistoryStatsFailedCallAttempts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of failed call attempts during
this interval."
::= { csbHistoryStatsEntry 5 }
csbHistoryStatsCallRoutingFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to routing failures during this interval."
::= { csbHistoryStatsEntry 6 }
csbHistoryStatsCallResourceFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to resource failures during this interval."
::= { csbHistoryStatsEntry 7 }
csbHistoryStatsCallMediaFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to media failure during this interval."
::= { csbHistoryStatsEntry 8 }
csbHistoryStatsFailSigFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to signaling failure during this interval."
::= { csbHistoryStatsEntry 9 }
csbHistoryStatsActiveCallFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of active call failures during
this interval."
::= { csbHistoryStatsEntry 10 }
csbHistoryStatsCongestionFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to congestion during this interval."
::= { csbHistoryStatsEntry 11 }
csbHistoryStatsCallSetupPolicyFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to some policy violations during this interval."
::= { csbHistoryStatsEntry 12 }
csbHistoryStatsCallSetupNAPolicyFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to NA policy failure during this interval."
::= { csbHistoryStatsEntry 13 }
csbHistoryStatsCallSetupRoutingPolicyFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to routing policy failure during this interval."
::= { csbHistoryStatsEntry 14 }
csbHistoryStatsCallSetupCACPolicyFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to CAC policy failure during this interval."
::= { csbHistoryStatsEntry 15 }
csbHistoryStatsCallSetupCACCallLimitFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to CAC call limit during this interval."
::= { csbHistoryStatsEntry 16 }
csbHistoryStatsCallSetupCACRateLimitFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to CAC call rate limit during this interval."
::= { csbHistoryStatsEntry 17 }
csbHistoryStatsCallSetupCACBandwidthFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to CAC bandwidth limit during this interval."
::= { csbHistoryStatsEntry 18 }
csbHistoryStatsCallSetupCACMediaLimitFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call setup failures due
to CAC media limit during this interval."
::= { csbHistoryStatsEntry 19 }
csbHistoryStatsCallSetupCACMediaUpdateFailure OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of call update failure due
to policy failure during this interval."
::= { csbHistoryStatsEntry 20 }
csbHistoryStatsTimestamp OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the time at the start of the interval
when measurements were first collected for this interval in the
csbCurrPeriodicStatsTable."
::= { csbHistoryStatsEntry 21 }
csbPerFlowStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CsbPerFlowStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes statistics table for each call flow. The
indices of the table are virtual media gateway id, gate id,
falow pair id and side id (indices for side A or side B). The
other indices of this tbale are csbCallStatsInstanceIndex
defined in csbCallStatsInstanceTable and
csbCallStatsServiceIndex defined in csbCallStatsTable."
::= { ciscoSbcCallStatsMIBObjects 5 }
csbPerFlowStatsEntry OBJECT-TYPE
SYNTAX CsbPerFlowStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An conceptual row in the csbPerFlowStatsTable. There is
an entry in this table for vdbe Id, gate id, flow pair id and
side id. The other indices of this tbale are
csbCallStatsInstanceIndex defined in csbCallStatsInstanceTable
and csbCallStatsServiceIndex defined in csbCallStatsTable."
INDEX {
csbCallStatsInstanceIndex,
csbCallStatsServiceIndex,
csbPerFlowStatsVdbeId,
csbPerFlowStatsGateId,
csbPerFlowStatsFlowPairId,
csbPerFlowStatsSideId
}
::= { csbPerFlowStatsTable 1 }
CsbPerFlowStatsEntry ::= SEQUENCE {
csbPerFlowStatsVdbeId Integer32,
csbPerFlowStatsGateId Integer32,
csbPerFlowStatsFlowPairId Integer32,
csbPerFlowStatsSideId INTEGER,
csbPerFlowStatsFlowType INTEGER,
csbPerFlowStatsRTPPktsSent Counter64,
csbPerFlowStatsRTPPktsRcvd Counter64,
csbPerFlowStatsRTPPktsDiscard Counter64,
csbPerFlowStatsRTPOctetsSent Counter64,
csbPerFlowStatsRTPOctetsRcvd Counter64,
csbPerFlowStatsRTPOctetsDiscard Counter64,
csbPerFlowStatsRTCPPktsSent Counter64,
csbPerFlowStatsRTCPPktsRcvd Counter64,
csbPerFlowStatsRTCPPktsLost Counter64,
csbPerFlowStatsEPJitter Counter64,
csbPerFlowStatsTmanPerMbs Gauge32,
csbPerFlowStatsTmanPerSdr Gauge32,
csbPerFlowStatsDscpSettings SnmpAdminString,
csbPerFlowStatsAdrStatus OCTET STRING,
csbPerFlowStatsQASettings OCTET STRING
}
csbPerFlowStatsVdbeId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the virtual media gateway id. This
object also acts as an index for the table."
::= { csbPerFlowStatsEntry 1 }
csbPerFlowStatsGateId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the gate id. This object also acts as
an index for the table."
::= { csbPerFlowStatsEntry 2 }
csbPerFlowStatsFlowPairId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the flow pair id. This object also acts
as an index for the table."
::= { csbPerFlowStatsEntry 3 }
csbPerFlowStatsSideId OBJECT-TYPE
SYNTAX INTEGER {
sideA(1),
sideB(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the index corresponding to side of flow
pair either side A or side B. This object also acts as an index
for the table."
::= { csbPerFlowStatsEntry 4 }
csbPerFlowStatsFlowType OBJECT-TYPE
SYNTAX INTEGER {
media(1),
signalling(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the type of the flow, like media flow,
signaling flow etc."
::= { csbPerFlowStatsEntry 5 }
csbPerFlowStatsRTPPktsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of RTP packets sent per flow
by the SBC."
::= { csbPerFlowStatsEntry 6 }
csbPerFlowStatsRTPPktsRcvd OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of RTP packets received per
flow by the SBC."
::= { csbPerFlowStatsEntry 7 }
csbPerFlowStatsRTPPktsDiscard OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of RTP packets discarded per
flow by the SBC."
::= { csbPerFlowStatsEntry 8 }
csbPerFlowStatsRTPOctetsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of RTP octets sent
per flow by the SBC."
::= { csbPerFlowStatsEntry 9 }
csbPerFlowStatsRTPOctetsRcvd OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of RTP octets received
per flow by the SBC."
::= { csbPerFlowStatsEntry 10 }
csbPerFlowStatsRTPOctetsDiscard OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of RTP octets discarded
per flow by the SBC."
::= { csbPerFlowStatsEntry 11 }
csbPerFlowStatsRTCPPktsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RTP packets sent by the remote end point to this
MG on this flow. Comparing this with the local number of RTP
packets received from the remote end point gives an indication
of how many incoming packets were dropped on this leg of the
call. This information is from RTCP packet. Not all endpoints
report this statistic, if it is not available it will be set to
zero. This statistic will not be available for signaling flows."
::= { csbPerFlowStatsEntry 12 }
csbPerFlowStatsRTCPPktsRcvd OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RTP packets received by the remote end point from
this MG on this flow. Comparing this with the local number of
RTP packets sent from this MG to the remote endpoint gives an
indication of how many outgoing packets were dropped on this
leg of the call. This information is from RTCP packet. Not all
endpoints report this statistic, if it is not available it will
be set to zero. This statistic will not be available for
signaling flows."
::= { csbPerFlowStatsEntry 13 }
csbPerFlowStatsRTCPPktsLost OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RTP packets reported as lost by the remote end
point on this flow. This information is from RTCP packet. Not
all endpoints report this statistic, if it is not available it
will be set to zero. This statistic will not be available for
signaling flows."
::= { csbPerFlowStatsEntry 14 }
csbPerFlowStatsEPJitter OBJECT-TYPE
SYNTAX Counter64
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the End Point jitter per flow in the
SBC."
::= { csbPerFlowStatsEntry 15 }
csbPerFlowStatsTmanPerMbs OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object indicates the maximum burst size for the
current FlowPair."
::= { csbPerFlowStatsEntry 16 }
csbPerFlowStatsTmanPerSdr OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilobytes per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object indicates the bandwidth reserved for flow in
kilobytes/second."
::= { csbPerFlowStatsEntry 17 }
csbPerFlowStatsDscpSettings OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object indicates the mark packets sent for the
current FlowPair with, or zero if none set. The DSCP is a 6-bit
value, which will be present in the top 6 bits of the lowest
byte of this field."
::= { csbPerFlowStatsEntry 18 }
csbPerFlowStatsAdrStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object indicates whether the flow on the current
FlowPair has subscribed for the NAT latch event."
::= { csbPerFlowStatsEntry 19 }
csbPerFlowStatsQASettings OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object indicates the flow on the current FlowPair has
subscribed for the media loss event."
::= { csbPerFlowStatsEntry 20 }
csbH248StatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CsbH248StatsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table describes the H.248 statistics for SBC. The index of
the table is service index which corresponds to a particular
service configured on the SBC and the index assigned to a
particular H.248 controller. The other index of this table is
csbCallStatsInstanceIndex defined in csbCallStatsInstanceTable.
This table is replaced by the csbH248StatsRev1Table."
::= { ciscoSbcCallStatsMIBObjects 6 }
csbH248StatsEntry OBJECT-TYPE
SYNTAX CsbH248StatsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An conceptual row in the csbCallStath248Table. There is
an entry in this table for the particular controller by a value
of csbH248StatsCtrlrIndex. The other indices of this tbale are
csbCallStatsInstanceIndex defined in csbCallStatsInstanceTable
and csbCallStatsServiceIndex defined in csbCallStatsTable."
INDEX {
csbCallStatsInstanceIndex,
csbCallStatsServiceIndex,
csbH248StatsCtrlrIndex
}
::= { csbH248StatsTable 1 }
CsbH248StatsEntry ::= SEQUENCE {
csbH248StatsCtrlrIndex Integer32,
csbH248StatsRequestsSent Counter32,
csbH248StatsRequestsRcvd Counter32,
csbH248StatsRequestsFailed Counter32,
csbH248StatsRequestsRetried Counter32,
csbH248StatsRepliesSent Counter32,
csbH248StatsRepliesRcvd Counter32,
csbH248StatsRepliesRetried Counter32,
csbH248StatsSegPktsSent Counter32,
csbH248StatsSegPktsRcvd Counter32,
csbH248StatsEstablishedTime OCTET STRING,
csbH248StatsTMaxTimeoutVal Integer32,
csbH248StatsRTT Gauge32,
csbH248StatsLT Gauge32
}
csbH248StatsCtrlrIndex OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This object identifies the controller index of the H.248
server. This is also the index for the table."
::= { csbH248StatsEntry 1 }
csbH248StatsRequestsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the requests sent through the Session
Controller Interface to an SBE or DBE."
::= { csbH248StatsEntry 2 }
csbH248StatsRequestsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the requests received through the
Session Controller Interface to an SBE or DBE."
::= { csbH248StatsEntry 3 }
csbH248StatsRequestsFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the requests failed on session
Controller Interface to an SBE or DBE."
::= { csbH248StatsEntry 4 }
csbH248StatsRequestsRetried OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the requests retried through the Session
Controller Interface to an SBE or DBE."
::= { csbH248StatsEntry 5 }
csbH248StatsRepliesSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the number of replies sent through the
Session Controller Interface to an SBE or DBE."
::= { csbH248StatsEntry 6 }
csbH248StatsRepliesRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the number of replies received from the
Session Controller Interface to an SBE or DBE."
::= { csbH248StatsEntry 7 }
csbH248StatsRepliesRetried OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the number of replies retried through
the Session Controller Interface to an SBE or DBE."
::= { csbH248StatsEntry 8 }
csbH248StatsSegPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the number of packets sent through the
Session Controller Interface to an SBE or DBE."
::= { csbH248StatsEntry 9 }
csbH248StatsSegPktsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the number of packets received from the
Session Controller Interface to an SBE or DBE."
::= { csbH248StatsEntry 10 }
csbH248StatsEstablishedTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..80))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This MIB object indicates the H.248 Controller established
time (the time at which the association became established)."
::= { csbH248StatsEntry 11 }
csbH248StatsTMaxTimeoutVal OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This MIB object indicates the T-Max timeout value. This field
specifies the maximum delay (in milliseconds) for a response
from an MGC before deciding that the request has failed."
::= { csbH248StatsEntry 12 }
csbH248StatsRTT OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This MIB object indicates the calculated RTT value. This field
specifies the maximum round trip propagation delay in the
network (in milliseconds)."
::= { csbH248StatsEntry 13 }
csbH248StatsLT OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This MIB object indicates the LT value calculated from RTT
value and Max timeout value. This field specifies the maximum
delay (in milliseconds) for a response from an MGC plus the
maximum round trip propagation delay in the network (in
milliseconds)."
::= { csbH248StatsEntry 14 }
csbH248StatsRev1Table OBJECT-TYPE
SYNTAX SEQUENCE OF CsbH248StatsRev1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the H.248 statistics for SBC. The index of
the table is service index which corresponds to a particular
service configured on the SBC and the index assigned to a
particular H.248 controller. The other index of this table is
csbCallStatsInstanceIndex defined in csbCallStatsInstanceTable."
::= { ciscoSbcCallStatsMIBObjects 7 }
csbH248StatsRev1Entry OBJECT-TYPE
SYNTAX CsbH248StatsRev1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An conceptual row in the csbCallStath248Table. There is
an entry in this table for the particular Vdbe by a value
of csbH248StatsVdbeId. The other indices of this tbale are
csbCallStatsInstanceIndex defined in csbCallStatsInstanceTable
and csbCallStatsServiceIndex defined in csbCallStatsTable."
INDEX {
csbCallStatsInstanceIndex,
csbCallStatsServiceIndex,
csbH248StatsVdbeId
}
::= { csbH248StatsRev1Table 1 }
CsbH248StatsRev1Entry ::= SEQUENCE {
csbH248StatsVdbeId Integer32,
csbH248StatsRequestsSentRev1 Counter32,
csbH248StatsRequestsRcvdRev1 Counter32,
csbH248StatsRequestsFailedRev1 Counter32,
csbH248StatsRequestsRetriedRev1 Counter32,
csbH248StatsRepliesSentRev1 Counter32,
csbH248StatsRepliesRcvdRev1 Counter32,
csbH248StatsRepliesRetriedRev1 Counter32,
csbH248StatsSegPktsSentRev1 Counter32,
csbH248StatsSegPktsRcvdRev1 Counter32,
csbH248StatsEstablishedTimeRev1 OCTET STRING,
csbH248StatsTMaxTimeoutValRev1 Integer32,
csbH248StatsRTTRev1 Gauge32,
csbH248StatsLTRev1 Gauge32
}
csbH248StatsVdbeId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the virtual media gateway id. This is
also the index for the table."
::= { csbH248StatsRev1Entry 1 }
csbH248StatsRequestsSentRev1 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the requests sent through the Session
Controller Interface to an SBE or DBE."
::= { csbH248StatsRev1Entry 2 }
csbH248StatsRequestsRcvdRev1 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the requests received through the
Session Controller Interface to an SBE or DBE."
::= { csbH248StatsRev1Entry 3 }
csbH248StatsRequestsFailedRev1 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the requests failed on session
Controller Interface to an SBE or DBE."
::= { csbH248StatsRev1Entry 4 }
csbH248StatsRequestsRetriedRev1 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the requests retried through the Session
Controller Interface to an SBE or DBE."
::= { csbH248StatsRev1Entry 5 }
csbH248StatsRepliesSentRev1 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of replies sent through the
Session Controller Interface to an SBE or DBE."
::= { csbH248StatsRev1Entry 6 }
csbH248StatsRepliesRcvdRev1 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of replies received from the
Session Controller Interface to an SBE or DBE."
::= { csbH248StatsRev1Entry 7 }
csbH248StatsRepliesRetriedRev1 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of replies retried through
the Session Controller Interface to an SBE or DBE."
::= { csbH248StatsRev1Entry 8 }
csbH248StatsSegPktsSentRev1 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of response segments sent by
DBE. This field will only be present if segmentation is enabled
on this association."
::= { csbH248StatsRev1Entry 9 }
csbH248StatsSegPktsRcvdRev1 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of response segments received
by DBE. This field will only be present if segmentation is
enabled on this association."
::= { csbH248StatsRev1Entry 10 }
csbH248StatsEstablishedTimeRev1 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object indicates the H.248 Controller established
time (the time at which the association became established)."
::= { csbH248StatsRev1Entry 11 }
csbH248StatsTMaxTimeoutValRev1 OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object indicates the T-Max timeout value. This field
specifies the maximum delay (in milliseconds) for a response
from an MGC before deciding that the request has failed."
::= { csbH248StatsRev1Entry 12 }
csbH248StatsRTTRev1 OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object indicates the calculated RTT value. This field
specifies the maximum round trip propagation delay in the
network (in milliseconds)."
::= { csbH248StatsRev1Entry 13 }
csbH248StatsLTRev1 OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This MIB object indicates the LT value calculated from RTT
value and Max timeout value. This field specifies the maximum
delay (in milliseconds) for a response from an MGC plus the
maximum round trip propagation delay in the network (in
milliseconds)."
::= { csbH248StatsRev1Entry 14 }
csbCallStatsMIBCompliances OBJECT IDENTIFIER
::= { ciscoSbcCallStatsMIBConform 1 }
csbCallStatsMIBGroups OBJECT IDENTIFIER
::= { ciscoSbcCallStatsMIBConform 2 }
csbCallStatsMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"This is a default module-compliance
containing csbCallStatsMIBGroups."
MODULE -- this module
MANDATORY-GROUPS {
csbGlobalStatsGroup,
csbCurrPeriodicStatsGroup,
csbHistoryStatsGroup,
csbPerFlowStatsGroup,
csbH248StatsGroup,
csbStatsInstanceGroup
}
::= { csbCallStatsMIBCompliances 1 }
csbCallStatsMIBComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"This is a default module-compliance
containing csbCallStatsMIBGroups."
MODULE -- this module
MANDATORY-GROUPS {
csbGlobalStatsGroup,
csbCurrPeriodicStatsGroup,
csbHistoryStatsGroup,
csbPerFlowStatsGroup,
csbH248StatsGroupRev1,
csbStatsInstanceGroup
}
::= { csbCallStatsMIBCompliances 2 }
csbStatsInstanceGroup OBJECT-GROUP
OBJECTS { csbCallStatsInstancePhysicalIndex }
STATUS current
DESCRIPTION
"A collection of objects providing physical entity index for
cisco Session border Controller (SBC)."
::= { csbCallStatsMIBGroups 1 }
-- Units of Conformance
csbGlobalStatsGroup OBJECT-GROUP
OBJECTS {
csbCallStatsCallsHigh,
csbCallStatsRate1Sec,
csbCallStatsCallsLow,
csbCallStatsAvailableFlows,
csbCallStatsUsedFlows,
csbCallStatsTotalFlows,
csbCallStatsRTPPktsRcvd,
csbCallStatsRTPPktsDiscard,
csbCallStatsUsedSigFlows,
csbCallStatsTotalSigFlows,
csbCallStatsAvailablePktRate,
csbCallStatsPeakFlows,
csbCallStatsUnclassifiedPkts,
csbCallStatsRTPOctetsSent,
csbCallStatsRTPOctetsRcvd,
csbCallStatsRTPOctetsDiscard,
csbCallStatsPeakSigFlows,
csbCallStatsSbcName,
csbCallStatsRTPPktsSent,
csbCallStatsNoMediaCount,
csbCallStatsRouteErrors
}
STATUS current
DESCRIPTION
"A collection of objects providing global statistics for cisco
Session border Controller (SBC)."
::= { csbCallStatsMIBGroups 2 }
csbCurrPeriodicStatsGroup OBJECT-GROUP
OBJECTS {
csbCurrPeriodicStatsActiveCalls,
csbCurrPeriodicStatsActivatingCalls,
csbCurrPeriodicStatsDeactivatingCalls,
csbCurrPeriodicStatsTotalCallAttempts,
csbCurrPeriodicStatsFailedCallAttempts,
csbCurrPeriodicStatsCallRoutingFailure,
csbCurrPeriodicStatsCallResourceFailure,
csbCurrPeriodicStatsCallMediaFailure,
csbCurrPeriodicStatsCallSigFailure,
csbCurrPeriodicStatsActiveCallFailure,
csbCurrPeriodicStatsCongestionFailure,
csbCurrPeriodicStatsCallSetupPolicyFailure,
csbCurrPeriodicStatsCallSetupNAPolicyFailure,
csbCurrPeriodicStatsCallSetupRoutingPolicyFailure,
csbCurrPeriodicStatsCallSetupCACPolicyFailure,
csbCurrPeriodicStatsCallSetupCACCallLimitFailure,
csbCurrPeriodicStatsCallSetupCACRateLimitFailure,
csbCurrPeriodicStatsCallSetupCACBandwidthFailure,
csbCurrPeriodicStatsCallSetupCACMediaLimitFailure,
csbCurrPeriodicStatsCallSetupCACMediaUpdateFailure,
csbCurrPeriodicStatsTimestamp
}
STATUS current
DESCRIPTION
"A collection of objects providing current 5 minute statistics
for Cisco Session border Controller (SBC)."
::= { csbCallStatsMIBGroups 3 }
csbHistoryStatsGroup OBJECT-GROUP
OBJECTS {
csbHistoryStatsActiveCalls,
csbHistoryStatsTotalCallAttempts,
csbHistoryStatsFailedCallAttempts,
csbHistoryStatsCallRoutingFailure,
csbHistoryStatsCallResourceFailure,
csbHistoryStatsCallMediaFailure,
csbHistoryStatsFailSigFailure,
csbHistoryStatsActiveCallFailure,
csbHistoryStatsCongestionFailure,
csbHistoryStatsCallSetupPolicyFailure,
csbHistoryStatsCallSetupNAPolicyFailure,
csbHistoryStatsCallSetupRoutingPolicyFailure,
csbHistoryStatsCallSetupCACPolicyFailure,
csbHistoryStatsCallSetupCACCallLimitFailure,
csbHistoryStatsCallSetupCACRateLimitFailure,
csbHistoryStatsCallSetupCACBandwidthFailure,
csbHistoryStatsCallSetupCACMediaLimitFailure,
csbHistoryStatsCallSetupCACMediaUpdateFailure,
csbHistoryStatsTimestamp
}
STATUS current
DESCRIPTION
"A collection of objects providing previous 5 minute statistics
for Cisco Session border Controller (SBC)."
::= { csbCallStatsMIBGroups 4 }
csbPerFlowStatsGroup OBJECT-GROUP
OBJECTS {
csbPerFlowStatsRTPPktsRcvd,
csbPerFlowStatsRTPPktsSent,
csbPerFlowStatsRTPPktsDiscard,
csbPerFlowStatsRTCPPktsSent,
csbPerFlowStatsRTPOctetsRcvd,
csbPerFlowStatsRTPOctetsSent,
csbPerFlowStatsRTPOctetsDiscard,
csbPerFlowStatsRTCPPktsRcvd,
csbPerFlowStatsRTCPPktsLost,
csbPerFlowStatsFlowType,
csbPerFlowStatsTmanPerMbs,
csbPerFlowStatsTmanPerSdr,
csbPerFlowStatsDscpSettings,
csbPerFlowStatsAdrStatus,
csbPerFlowStatsQASettings,
csbPerFlowStatsEPJitter
}
STATUS current
DESCRIPTION
"A collection of objects providing per flow statistics
for Cisco Session border Controller (SBC)."
::= { csbCallStatsMIBGroups 5 }
csbH248StatsGroup OBJECT-GROUP
OBJECTS {
csbH248StatsRequestsSent,
csbH248StatsRequestsRcvd,
csbH248StatsRequestsFailed,
csbH248StatsRequestsRetried,
csbH248StatsRepliesSent,
csbH248StatsRepliesRcvd,
csbH248StatsRepliesRetried,
csbH248StatsSegPktsSent,
csbH248StatsSegPktsRcvd,
csbH248StatsTMaxTimeoutVal,
csbH248StatsRTT,
csbH248StatsLT,
csbH248StatsEstablishedTime
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing H.248 statistics for Cisco
Session border Controller (SBC)."
::= { csbCallStatsMIBGroups 6 }
csbH248StatsGroupRev1 OBJECT-GROUP
OBJECTS {
csbH248StatsRequestsSentRev1,
csbH248StatsRequestsRcvdRev1,
csbH248StatsRequestsFailedRev1,
csbH248StatsRequestsRetriedRev1,
csbH248StatsRepliesSentRev1,
csbH248StatsRepliesRcvdRev1,
csbH248StatsRepliesRetriedRev1,
csbH248StatsSegPktsSentRev1,
csbH248StatsSegPktsRcvdRev1,
csbH248StatsEstablishedTimeRev1,
csbH248StatsTMaxTimeoutValRev1,
csbH248StatsRTTRev1,
csbH248StatsLTRev1
}
STATUS current
DESCRIPTION
"A collection of objects providing H.248 statistics for Cisco
Session border Controller (SBC)."
::= { csbCallStatsMIBGroups 7 }
END
Reference in New Issue View Git Blame Copy Permalink