MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-SDSL-LINE-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

2728 lines
92 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- Description of managed objects for SDSL line interfaces.
--
-- 03/10/2000 Andy Spooner
-- Patrick Gili
--
-- Copyright (c) 1999, 2000, 2001 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-SDSL-LINE-MIB DEFINITIONS ::= BEGIN
IMPORTS
Counter32,
Gauge32,
Integer32,
MODULE-IDENTITY,
OBJECT-TYPE FROM SNMPv2-SMI
TruthValue,
VariablePointer,
TEXTUAL-CONVENTION FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
ciscoMgmt FROM CISCO-SMI
AdslLineProfileName,
adslLineConfProfileName,
adslLineAlarmConfProfileName FROM ADSL-LINE-MIB
ifIndex FROM IF-MIB
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
PerfCurrentCount,
PerfIntervalCount FROM PerfHist-TC-MIB;
ciscoSdslLineMIB MODULE-IDENTITY
LAST-UPDATED "200108201000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO "Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
Tel: +1 800 553-NETS
E-mail: cs-dslam@cisco.com"
DESCRIPTION
"This MIB module describes all variations of the symmetric
DSL line interfaces. The structure of this module resembles
and maintains consistency with the ADSL-LINE-MIB,
ADSL-DMT-LINE-MIB, CISCO-ADSL-DMT-LINE-MIB, and
CISCO-ADSL-CAP-LINE-MIB. Observe that the tables in this
module do not necessarily extend the tables defined by the
these mibs. Currently, only those tables that contain
configuration information extend the profile tables defined
by the above modules. This allows the management
client to define DSL configuration profiles that apply across
all DSL modems, independent of the technology being utilized by
the modem.
*** DEFINITIONS ***
ATTENUATION
Attenuation is a decrease in the strength of a signal
over the length of a cable.
CODING VIOLATION
A coding violation occurs when the incoming signal exhibits
a CRC anomaly.
DOWNSTREAM
The flow of data in the direction from the ATU-C to ATU-R.
ERRORED SECOND
A second with one or more coding violations or one or more
incoming defects (e.g., LOS or LOSQ).
LINE RATE
The total data rate supported by a line. Observe that the
payload rate is equal the line rate for the earliest
implementations of SDSL. However, the payload rate maybe
less than the line rate for future implementations.
LOSS OF SYNC DEFECT
A Loss of Sync Defect is defined as 3 consecutive received
frames which contain one or more errors in the framing
bits. A Loss of Sync Defect shall be cleared when at least
2 consecutive received frames contain no errors in the
framing bits.
LOSS OF SYNC FAILURE
A LOSW Failure is defined as at least 2 consecutive
seconds of LOSW Defect. The LOSW Failure should be
cleared when the LOSW defect is absent for 20 seconds or
less. (i.e. clear within 20 seconds ).
MARGIN (also referred to as 'SNR margin')
The difference between the SNR of the received signal and
the SNR required to provide a BER of 10E-7.
SEVERELY ERRORED SECOND
A one second interval during which or more LOSW or CV defects
are declared.
UNAVAILABLE SECOND
A Unavailable Second is defined as a one second interval
during which LOSW Failure ( at least 2 seconds of LOSW
Defect ).
UPSTREAM
The flow of data in the direction from the ATU-R to ATU-C.
*** ABBREVIATIONS, ACRONYMS, AND SYMBOLS ***
ADSL - Asymmetric Digital Subscriber Line.
ATM - Asynchronous Transfer Mode.
BER - Bit Error Ratio.
CV - Coding Violation.
DSL - Digital Subscriber Line.
ES - Errored Second.
LOS - Loss Of Sync.
LOSQ - Loss Of Signal Quality.
LOSW - Loss of Sync Word Failure
PSD - Power Spectral Density.
SES - Severely Errored Second.
SNR - Signal-to-Noise Ratio.
STM - Synchronous Transfer Mode.
STU-C - SDSL Transceiver Unit, Central Office end.
STU-R - ADSL Transceiver Unit, Remote terminal end.
UAS - UnAvailable Second."
REVISION "200108201000Z"
DESCRIPTION
"The object cSdslStucCurrGain and cSdslSturCurrGain are
deprecated to remove the range. The new objects added are
cSdslStucCurrGainRev and cSdslSturCurrGainRev."
REVISION "200104091013Z" -- April 9, 2001 10:13 AM
DESCRIPTION
"Added cSdslSturAnnex for G.shdsl CPE device. Also updated
description for cSdslStucAnnex. "
REVISION "200101301600Z"
DESCRIPTION
"Added cSdslLineEquipmentType, cSdslLineAutoRateEnable.
cSdslShdslLineMaxRate, cSdslStucPsdMaskType, cSdslStucAnnex,
and cSdslStucThresholdSnrMgn. Changed default for
cSdslLineMaxRate. Updated description for SNR and output
pwr profile settings."
::= { ciscoMgmt 155 }
-- Textual Conventions
SdslPerfTimeElapsed ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The number of seconds that have elapsed since the beginning of
the current measurement period. If, for some reason, such as an
adjustment in the system's time-of-day clock, the current
interval exceeds the maximum value, the agent will return the
maximum value."
SYNTAX Gauge32
SdslPerfCurrDayCount ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A counter associated with interval performance measurements in
a current 1-day (24 hour) measurement interval.
The value of this counter starts at zero at the beginning of an
interval and increases when associated events occur, until the
end of the 1-day interval. At that time, the agent stores the
value of the counter in the previous 1-day history interval,
if available, and resets the value of the counter to zero.
In the case where the agent has no valid data available for this
interval, the corresponding object instance is not available.
In this case, the agent will respond with the appropriate error
indicating that the instance does not exist; that is,
'noSuchName' in response to a SNMPv1 get request, and
'noSuchInstance' in response to a SNMPv2 get request."
SYNTAX Gauge32
SdslPerfPrevDayCount ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A counter associated with interval performance measurements
during the most previous 1-day (24 hour) measurement interval.
The value of this counter is equal to the current day counter
at the end of its most recent interval.
In the case where the agent has no valid data available for this
interval, the corresponding object instance is not available.
In this case, the agent will respond with the appropriate error
indicating that the instance does not exist; that is,
'noSuchName' in response to a SNMPv1 get request, and
'noSuchInstance' in response to a SNMPv2 get request."
SYNTAX Gauge32
SdslStuxDefect ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This object specifies any possible defects currently being
exhibited by the STU-x. The value of this object is a bitmap
of possible defects. The following list summarizes the
meaning of each bit in the bitmap
0 lossOfSignal The STU-x is not receiving signal.
1 lossOfSignalQuality The upstream SNR margin has fallen
below the SNR margin required to
maintain a minimum BER of 10^-7.
2 noPeerStuPresent The STU-x can not initialize due
to the absence of a peer STU-x.
3 lossOfSyncFailure The STU-x has suffered from at
least 2 consecutive seconds of
LOSW defect."
SYNTAX BITS {
lossOfSignal(0),
lossOfSignalQuality(1),
noPeerStuPresent(2),
lossOfSyncFailure(3)
}
-- MIB Objects Definitions
ciscoSdslLineMIBObjects OBJECT IDENTIFIER ::= { ciscoSdslLineMIB 1 }
-- SDSL Line Table
cSdslLineTable OBJECT-TYPE
SYNTAX SEQUENCE OF CSdslLineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the enterprise-specific common attributes
describing both ends of SDSL lines supported by the system."
::= { ciscoSdslLineMIBObjects 1 }
cSdslLineEntry OBJECT-TYPE
SYNTAX CSdslLineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of enterprise-specific common attributes describing both
ends of an SDSL line supported by the system. There exists an
entry for each ifEntry with an ifType of sdsl(96)."
INDEX { ifIndex }
::= { cSdslLineTable 1 }
CSdslLineEntry ::= SEQUENCE {
cSdslLineCoding INTEGER,
cSdslLineFraming INTEGER,
cSdslLineSpecific VariablePointer,
cSdslLineConfProfile AdslLineProfileName,
cSdslLineAlarmConfProfile AdslLineProfileName
}
cSdslLineCoding OBJECT-TYPE
SYNTAX INTEGER {
other(1), --
base2b1q(2),-- Baseband, 2B1Q encoding. SDSL ports may use 2b1q
-- line coding.
tcPam(3), -- Trellis Coded Pulse Amplitude Modulated.
-- G.shdsl ports use tcPam line coding.
optis(4), -- Overlapped Pulse Amplitude Modulated
-- Transmission with Interlocked Spectra. HDSL2
-- ports use optis line coding.
cap(5) -- Carrierless Amplitude/Phase Modulation. SDSL
-- may use cap line coding.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies encoding of signal used by this line. Other types
may be added in the future."
REFERENCE
"ITU Draft G.Shdsl, Single-Pair High Speed Digital Subscriber
Line(SHDSL) Transceivers,
T1E1.4, Draft for HDSL2 Standard, Default Letter Ballot,
ITU-T G991.1, High-Bit-Rate Digital Subscriber Transceivers(HDSL)"
::= { cSdslLineEntry 1 }
cSdslLineFraming OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no frame format
other(2), --
hdsl(3), -- HDSL frame format for SDSL interaces
gShdsl(4), -- G.SHDSL frame format for G.SHDSL
hdsl2(5), -- HDSL2 frame format for HDSL2 interfaces
ds1(6) -- DS1 frame format for HDSL2 interfaces
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the current Transmission Convergence
framing structure being used by the interface."
REFERENCE
"ITU Draft G.Shdsl, Single-Pair High Speed Digital Subscriber
Line(SHDSL) Transceivers,
T1E1.4, Draft for HDSL2 Standard, Default Letter Ballot,
ITU-T G991.1, High-Bit-Rate Digital Subscriber Transceivers(HDSL)"
::= { cSdslLineEntry 2}
cSdslLineSpecific OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies an object identifier of an instance of
an object in the MIB. The implementation determines the
application of this object. For example, an implementation
may use this object to provide a reference to the port-class
physical entity (see the ENTITY-MIB for further details)
corresponding to the SDSL line."
::= { cSdslLineEntry 3 }
cSdslLineConfProfile OBJECT-TYPE
SYNTAX AdslLineProfileName
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the row in the adslLineConfProfileTable
(see the ADSL-LINE-MIB for further details), which applies for
this SDSL line interface.
In the case the implementation utilizes 'dynamic mode' (see
the ADSL-LINE-MIB for further details), then the value of this
object defaults to the name of a configuration profile
designated by the implementation as the default configuration
profile.
In the case the implementation utilizes 'static mode', then the
the value of this object is read-only."
::= { cSdslLineEntry 4 }
cSdslLineAlarmConfProfile OBJECT-TYPE
SYNTAX AdslLineProfileName
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the row in the
adslLineAlarmConfProfileTable (see the ADSL-LINE-MIB for further
details), which applies for this SDSL line interface.
In the case the implementation utilizes 'dynamic mode' (see
the ADSL-LINE-MIB for further details), then the value of this
object defaults to the name of an alarm configuration profile
designated by the implementation as the default alarm
configuration profile.
In the case the implementation utilizes 'static mode', then the
the value of this object is read-only."
::= { cSdslLineEntry 5 }
-- SDSL STU-C Physical-Layer Parameters Table
cSdslStucPhysTable OBJECT-TYPE
SYNTAX SEQUENCE OF CSdslStucPhysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains enterprise-specific physical layer
parameters for STU-C class devices supported by the system."
::= { ciscoSdslLineMIBObjects 2 }
cSdslStucPhysEntry OBJECT-TYPE
SYNTAX CSdslStucPhysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of enterprise-specific physical-layer parameters for an
STU-C class device supported by the system. There exists an
entry for each ifEntry with an ifType of sdsl(96)."
INDEX { ifIndex }
::= { cSdslStucPhysTable 1 }
CSdslStucPhysEntry ::= SEQUENCE {
cSdslStucInvSerialNumber SnmpAdminString,
cSdslStucInvVendorId SnmpAdminString,
cSdslStucInvVersionNumber SnmpAdminString,
cSdslStucState INTEGER,
cSdslStucDefect SdslStuxDefect,
cSdslStucCurrRate Integer32,
cSdslStucCurrSnrMgn Gauge32,
cSdslStucCurrGain Integer32, --deprecated
cSdslStucCurrOutputPwr Gauge32,
cSdslStucCurrAtn Gauge32,
cSdslStucCurrGainRev Integer32
}
cSdslStucInvSerialNumber OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the vendor specific string that
identifies the vendor STU-C."
::= { cSdslStucPhysEntry 1 }
cSdslStucInvVendorId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the vendor identifier assigned according
to T1.220"
REFERENCE
"ANSI T1.220-1991 Coded Representation of the North American
Telecommunication Industry Manufacturers, Suppliers,
and Related Service Companies"
::= { cSdslStucPhysEntry 2 }
cSdslStucInvVersionNumber OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the vendor specific version number of
the STU-C."
::= { cSdslStucPhysEntry 3 }
cSdslStucState OBJECT-TYPE
SYNTAX INTEGER {
other(1), --
idle(2), -- Administratively down.
training(3), -- Transceiver training in progress.
steadyState(4), -- Nominal mode of operation.
testing(5), -- Transceiver in loopback or running BERT.
downloading(6), -- STU-C code download in progress.
downloadFailed(7) -- STU-C code download failed.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the state of the STU-C transceiver."
::= { cSdslStucPhysEntry 4 }
cSdslStucDefect OBJECT-TYPE
SYNTAX SdslStuxDefect
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies any possible defects currently being
exhibited by the STU-C.
This object has the intention of supplementing ifOperStatus."
::= { cSdslStucPhysEntry 5 }
cSdslStucCurrRate OBJECT-TYPE
SYNTAX Integer32 (0..2320000)
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the rate the STU-C transceiver was
able to obtain following training."
::= { cSdslStucPhysEntry 6 }
cSdslStucCurrSnrMgn OBJECT-TYPE
SYNTAX Gauge32
UNITS "tenth dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the SNR margin as seen by this STU-C with
respect to its received signal."
::= { cSdslStucPhysEntry 7 }
cSdslStucCurrGain OBJECT-TYPE
SYNTAX Integer32 (-200..200)
UNITS "tenth dB"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object specifies gain applied to this STU-C's receiver.
This object is deprecated by cSdslStucCurrGainRev which has
no specified range."
::= { cSdslStucPhysEntry 8 }
cSdslStucCurrOutputPwr OBJECT-TYPE
SYNTAX Gauge32
UNITS "tenth dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the measured total output power
transmitted by this STU-C. This is the measurement that was
reported during the last activation sequence."
::= { cSdslStucPhysEntry 9 }
cSdslStucCurrAtn OBJECT-TYPE
SYNTAX Gauge32
UNITS "tenth dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured difference in the total power transmitted by
the peer STU-R and the total power received by this STU-C."
::= { cSdslStucPhysEntry 10 }
cSdslStucCurrGainRev OBJECT-TYPE
SYNTAX Integer32
UNITS "tenth dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies gain applied to this STU-C's receiver.
This object deprecates cSdslStucCurrGainRev and has
no specified range."
::= { cSdslStucPhysEntry 11 }
-- SDSL STU-R Physical-Layer Parameters Table
cSdslSturPhysTable OBJECT-TYPE
SYNTAX SEQUENCE OF CSdslSturPhysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains enterprise-specific physical layer
parameters for STU-R class devices supported by the system.
-- Note to implementor:
-- If the implementation does not support remote management
-- of STU-R class devices, then the agent must respond with
-- the appropriate error indicating that the instance does not
-- exist; that is, 'noSuchName' in response to a SNMPv1 get
-- request, 'noSuchInstance' in response to a SNMPv2 get
-- request or a null string for string types."
::= { ciscoSdslLineMIBObjects 3 }
cSdslSturPhysEntry OBJECT-TYPE
SYNTAX CSdslSturPhysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of enterprise-specific physical-layer parameters for an
STU-R class device supported by the system. There exists an
entry for each ifEntry with an ifType of sdsl(96)."
INDEX { ifIndex }
::= { cSdslSturPhysTable 1 }
CSdslSturPhysEntry ::= SEQUENCE {
cSdslSturInvSerialNumber SnmpAdminString,
cSdslSturInvVendorId SnmpAdminString,
cSdslSturInvVersionNumber SnmpAdminString,
cSdslSturState INTEGER,
cSdslSturDefect SdslStuxDefect,
cSdslSturCurrRate Integer32,
cSdslSturCurrSnrMgn Gauge32,
cSdslSturCurrGain Integer32, --deprecated
cSdslSturCurrOutputPwr Gauge32,
cSdslSturCurrAtn Gauge32,
cSdslSturCurrGainRev Integer32
}
cSdslSturInvSerialNumber OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the vendor specific string that
identifies the vendor STU-R."
::= { cSdslSturPhysEntry 1 }
cSdslSturInvVendorId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the vendor identifier assigned according
to T1.220"
REFERENCE
"ANSI T1.220-1991 Coded Representation of the North American
Telecommunication Industry Manufacturers, Suppliers,
and Related Service Companies"
::= { cSdslSturPhysEntry 2 }
cSdslSturInvVersionNumber OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the vendor specific version number of
the STU-R."
::= { cSdslSturPhysEntry 3 }
cSdslSturState OBJECT-TYPE
SYNTAX INTEGER {
other(1), --
training(2), -- Transceiver training in progress.
steadyState(3) -- Nominal mode of operation.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the state of the STU-R transceiver."
::= { cSdslSturPhysEntry 4 }
cSdslSturDefect OBJECT-TYPE
SYNTAX SdslStuxDefect
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies any possible defects currently being
exhibited by the STU-R.
This object has the intention of supplementing ifOperStatus."
::= { cSdslSturPhysEntry 5 }
cSdslSturCurrRate OBJECT-TYPE
SYNTAX Integer32(0..2320000)
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the rate the STU-R transceiver was
able to obtain following training."
::= { cSdslSturPhysEntry 6 }
cSdslSturCurrSnrMgn OBJECT-TYPE
SYNTAX Gauge32
UNITS "tenth dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the SNR margin as seen by this STU-R with
respect to its received signal."
::= { cSdslSturPhysEntry 7 }
cSdslSturCurrGain OBJECT-TYPE
SYNTAX Integer32(-200..200)
UNITS "tenth dB"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object specifies gain applied to this STU-R's receiver.
This object is deprecated by cSdslSturCurrGainRev which has
no specified range."
::= { cSdslSturPhysEntry 8 }
cSdslSturCurrOutputPwr OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the measured total output power
transmitted by this STU-R. This is the measurement that was
reported during the last activation sequence."
::= { cSdslSturPhysEntry 9 }
cSdslSturCurrAtn OBJECT-TYPE
SYNTAX Gauge32
UNITS "tenth dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured difference in the total power transmitted by
the peer STU-C and the total power received by this STU-R"
::= { cSdslSturPhysEntry 10 }
cSdslSturCurrGainRev OBJECT-TYPE
SYNTAX Integer32
UNITS "tenth dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies gain applied to this STU-R's receiver.
This object deprecates by cSdslSturCurrGain and has
no specified range."
::= { cSdslSturPhysEntry 11 }
-- SDSL STU-C Performance Data Table
cSdslStucPerfDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF CSdslStucPerfDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains physical-layer statistics for STU-C class
devices supported by the system."
::= { ciscoSdslLineMIBObjects 6 }
cSdslStucPerfDataEntry OBJECT-TYPE
SYNTAX CSdslStucPerfDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of physical-layer statistics for an STU-C class device
supported by the system. There exists an entry for each ifEntry
with an ifType of sdsl(96)."
REFERENCE
"ITU Draft G.Shdsl, Single-Pair High Speed Digital Subscriber
Line(SHDSL) Transceivers,
T1E1.4, Draft for HDSL2 Standard, Default Letter Ballot,
ITU-T G991.1, High-Bit-Rate Digital Subscriber Transceivers(HDSL),
Tesink, K., Textual Conventions for MIB Modules Using
Performance History Based on 15 Minute Intervals, RFC 2493,
January 1999."
INDEX { ifIndex }
::= { cSdslStucPerfDataTable 1 }
CSdslStucPerfDataEntry ::= SEQUENCE {
cSdslStucPerfLOSs Counter32,
cSdslStucPerfLOSQs Counter32,
cSdslStucPerfCVs Counter32,
cSdslStucPerfESs Counter32,
cSdslStucPerfSESs Counter32,
cSdslStucPerfUASs Counter32,
cSdslStucPerfInits Counter32,
cSdslStucUnavailRsrcs Counter32,
cSdslStucPerfValidIntervals Integer32,
cSdslStucPerfInvalidIntervals Integer32,
cSdslStucPerfCurr15MinTimeElapse SdslPerfTimeElapsed,
cSdslStucPerfCurr15MinLOSs PerfCurrentCount,
cSdslStucPerfCurr15MinLOSQs PerfCurrentCount,
cSdslStucPerfCurr15MinCVs PerfCurrentCount,
cSdslStucPerfCurr15MinESs PerfCurrentCount,
cSdslStucPerfCurr15MinSESs PerfCurrentCount,
cSdslStucPerfCurr15MinUASs PerfCurrentCount,
cSdslStucPerfCurr15MinInits PerfCurrentCount,
cSdslStucPerfCurr15MinUnavlRsrcs PerfCurrentCount,
cSdslStucPerfCurr1DayTimeElapsed SdslPerfTimeElapsed,
cSdslStucPerfCurr1DayLOSs SdslPerfCurrDayCount,
cSdslStucPerfCurr1DayLOSQs SdslPerfCurrDayCount,
cSdslStucPerfCurr1DayCVs SdslPerfCurrDayCount,
cSdslStucPerfCurr1DayESs SdslPerfCurrDayCount,
cSdslStucPerfCurr1DaySESs SdslPerfCurrDayCount,
cSdslStucPerfCurr1DayUASs SdslPerfCurrDayCount,
cSdslStucPerfCurr1DayInits SdslPerfCurrDayCount,
cSdslStucPerfCurr1DayUnavlRsrcs SdslPerfCurrDayCount,
cSdslStucPerfPrev1DayMoniSecs Integer32,
cSdslStucPerfPrev1DayLOSs SdslPerfPrevDayCount,
cSdslStucPerfPrev1DayLOSQs SdslPerfPrevDayCount,
cSdslStucPerfPrev1DayCVs SdslPerfPrevDayCount,
cSdslStucPerfPrev1DayESs SdslPerfPrevDayCount,
cSdslStucPerfPrev1DaySESs SdslPerfPrevDayCount,
cSdslStucPerfPrev1DayUASs SdslPerfPrevDayCount,
cSdslStucPerfPrev1DayInits SdslPerfPrevDayCount,
cSdslStucPerfPrev1DayUnavlRsrcs SdslPerfPrevDayCount
}
cSdslStucPerfLOSs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of LOS failures experienced
by the STU-C since agent reset."
::= { cSdslStucPerfDataEntry 1 }
cSdslStucPerfLOSQs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of LOSQ failures experienced
by the STU-C since agent reset."
::= { cSdslStucPerfDataEntry 2 }
cSdslStucPerfCVs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of coding violations
experienced by the STU-C since agent reset."
::= { cSdslStucPerfDataEntry 3 }
cSdslStucPerfESs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of errored seconds
experienced by the STU-C since agent reset."
::= { cSdslStucPerfDataEntry 4 }
cSdslStucPerfSESs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of severely errored
seconds experienced by the STU-C since agent reset."
::= { cSdslStucPerfDataEntry 5 }
cSdslStucPerfUASs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of unavailable seconds
experienced by the STU-C since agent reset."
::= { cSdslStucPerfDataEntry 6 }
cSdslStucPerfInits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of line initializations
attempted by the STU-C since agent reset. This value includes
both successful and failed attempts."
::= { cSdslStucPerfDataEntry 7 }
cSdslStucUnavailRsrcs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of packets discarded on the
STU-C due to unavailable resources, such as lack of buffer
space."
::= { cSdslStucPerfDataEntry 8}
cSdslStucPerfValidIntervals OBJECT-TYPE
SYNTAX Integer32 (0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of previous near end intervals for
which valid data was collected. The value will be
96 unless the interface was brought online within
the last 24 hours, in which case the value will be
the number of complete 15 minute near end
intervals since the interface has been online."
::= { cSdslStucPerfDataEntry 9}
cSdslStucPerfInvalidIntervals OBJECT-TYPE
SYNTAX Integer32 (0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of near-end performance data 15-minute intervals in
the range from 0 to cSdslStucPerfValidIntervals for which no
data is available. This object will typically be zero except in
cases where the data for some intervals are not available (e.g.,
in proxy situations)."
::= { cSdslStucPerfDataEntry 10 }
cSdslStucPerfCurr15MinTimeElapse OBJECT-TYPE
SYNTAX SdslPerfTimeElapsed (0..899)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds that have elapsed since the beginning of
the current measurement period. If, for some reason, such as an
adjustment in the system's time-of-day clock, the current
interval exceeds the maximum value, the agent will return
the maximum value."
::= { cSdslStucPerfDataEntry 11 }
cSdslStucPerfCurr15MinLOSs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of seconds in the current
15-minute interval when the STU-C experienced LOS."
::= { cSdslStucPerfDataEntry 12 }
cSdslStucPerfCurr15MinLOSQs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of seconds in the current
15-minute interval when the STU-C experienced LOSQ."
::= { cSdslStucPerfDataEntry 13 }
cSdslStucPerfCurr15MinCVs OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of coding violations
experienced by the STU-C in the current 15-minute interval."
::= { cSdslStucPerfDataEntry 14 }
cSdslStucPerfCurr15MinESs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of errored seconds
experienced by the STU-C in the current 15-minute interval."
::= { cSdslStucPerfDataEntry 15 }
cSdslStucPerfCurr15MinSESs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of severely errored seconds
experienced by the STU-C in the current 15-minute interval."
::= { cSdslStucPerfDataEntry 16 }
cSdslStucPerfCurr15MinUASs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of unavailable seconds
experienced by the STU-C in the current 15-minute interval."
::= { cSdslStucPerfDataEntry 17 }
cSdslStucPerfCurr15MinInits OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of line initializations
attempted by the STU-C in the current 15-minute interval."
::= { cSdslStucPerfDataEntry 18 }
cSdslStucPerfCurr15MinUnavlRsrcs OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of packets discarded on the
STU-C due to unavailable resources, such as lack of buffer
space, in the current 15 minute interval."
::= { cSdslStucPerfDataEntry 19 }
cSdslStucPerfCurr1DayTimeElapsed OBJECT-TYPE
SYNTAX SdslPerfTimeElapsed (0..86399)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds that have elapsed since the beginning of
the current measurement period. If, for some reason, such as an
adjustment in the system's time-of-day clock, the current
interval exceeds the maximum value, the agent will return
the maximum value."
::= { cSdslStucPerfDataEntry 20 }
cSdslStucPerfCurr1DayLOSs OBJECT-TYPE
SYNTAX SdslPerfCurrDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of seconds experienced by the
STU-C in the current 1-day interval when there was LOS."
::= { cSdslStucPerfDataEntry 21 }
cSdslStucPerfCurr1DayLOSQs OBJECT-TYPE
SYNTAX SdslPerfCurrDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of seconds experienced by the
STU-C in the current 1-day interval when there was LOSQ."
::= { cSdslStucPerfDataEntry 22 }
cSdslStucPerfCurr1DayCVs OBJECT-TYPE
SYNTAX SdslPerfCurrDayCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of coding violations
experienced by the STU-C in the current 1-day interval."
::= { cSdslStucPerfDataEntry 23}
cSdslStucPerfCurr1DayESs OBJECT-TYPE
SYNTAX SdslPerfCurrDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of errored seconds
experienced by the STU-C in the current 1-day interval."
::= { cSdslStucPerfDataEntry 24 }
cSdslStucPerfCurr1DaySESs OBJECT-TYPE
SYNTAX SdslPerfCurrDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of severely errored seconds
experienced by the STU-C in the current 1-day interval."
::= { cSdslStucPerfDataEntry 25 }
cSdslStucPerfCurr1DayUASs OBJECT-TYPE
SYNTAX SdslPerfCurrDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of unavailable seconds
experienced by the STU-C in the current 1-day interval."
::= { cSdslStucPerfDataEntry 26 }
cSdslStucPerfCurr1DayInits OBJECT-TYPE
SYNTAX SdslPerfCurrDayCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of line initializations
attempted by the STU-C in the current 1-day interval."
::= { cSdslStucPerfDataEntry 27 }
cSdslStucPerfCurr1DayUnavlRsrcs OBJECT-TYPE
SYNTAX SdslPerfCurrDayCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of packets discarded on the
STU-C due to unavailable resources, such as lack of buffer
space, in the current 1-day interval."
::= { cSdslStucPerfDataEntry 28 }
cSdslStucPerfPrev1DayMoniSecs OBJECT-TYPE
SYNTAX Integer32 (0..86400)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time in the previous 1-day interval over which
the performance monitoring information is actually counted.
This value will be the same as the interval duration except
in a situation where performance monitoring data could not be
collected for any reason."
::= { cSdslStucPerfDataEntry 29 }
cSdslStucPerfPrev1DayLOSs OBJECT-TYPE
SYNTAX SdslPerfPrevDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of seconds in the current
1-day interval when the STU-C experienced LOS."
::= { cSdslStucPerfDataEntry 30 }
cSdslStucPerfPrev1DayLOSQs OBJECT-TYPE
SYNTAX SdslPerfPrevDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of seconds in the previous
1-day interval when the STU-C experienced LOSQ."
::= { cSdslStucPerfDataEntry 31 }
cSdslStucPerfPrev1DayCVs OBJECT-TYPE
SYNTAX SdslPerfPrevDayCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of coding violations
experienced by the STU-C in the previous 1-day interval."
::= { cSdslStucPerfDataEntry 32 }
cSdslStucPerfPrev1DayESs OBJECT-TYPE
SYNTAX SdslPerfPrevDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of errored seconds
experienced by the STU-C in the previous 1-day interval."
::= { cSdslStucPerfDataEntry 33 }
cSdslStucPerfPrev1DaySESs OBJECT-TYPE
SYNTAX SdslPerfPrevDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of severely errored seconds
experienced by the STU-C in the previous 1-day interval."
::= { cSdslStucPerfDataEntry 34 }
cSdslStucPerfPrev1DayUASs OBJECT-TYPE
SYNTAX SdslPerfPrevDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of unavailable seconds
experienced by the STU-C in the previous 1-day interval."
::= { cSdslStucPerfDataEntry 35 }
cSdslStucPerfPrev1DayInits OBJECT-TYPE
SYNTAX SdslPerfPrevDayCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of line initializations
attempted by the STU-C in the previous 1-day interval."
::= { cSdslStucPerfDataEntry 36 }
cSdslStucPerfPrev1DayUnavlRsrcs OBJECT-TYPE
SYNTAX SdslPerfPrevDayCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of packets discarded on the
STU-C due to unavailable resources, such as lack of buffer
space, in the previous 1-day interval."
::= { cSdslStucPerfDataEntry 37 }
-- SDSL STU-R Performance Data Table
cSdslSturPerfDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF CSdslSturPerfDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains physical-layer statistics for STU-R class
devices supported by the system.
-- Note to implementor:
-- If the implementation does not support remote management
-- of STU-R class devices, then the agent must respond with
-- the appropriate error indicating that the instance does not
-- exist; that is, 'noSuchName' in response to a SNMPv1 get
-- request, and 'noSuchInstance' in response to a SNMPv2 get
-- request."
::= { ciscoSdslLineMIBObjects 7 }
cSdslSturPerfDataEntry OBJECT-TYPE
SYNTAX CSdslSturPerfDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of physical-layer statistics for an STU-R class device
supported by the system. There exists an entry for each ifEntry
with an ifType of sdsl(96)."
REFERENCE
"ITU Draft G.Shdsl, Single-Pair High Speed Digital Subscriber
Line(SHDSL) Transceivers,
T1E1.4, Draft for HDSL2 Standard, Default Letter Ballot,
ITU-T G991.1, High-Bit-Rate Digital Subscriber Transceivers(HDSL)"
INDEX { ifIndex }
::= { cSdslSturPerfDataTable 1 }
CSdslSturPerfDataEntry ::= SEQUENCE {
cSdslSturPerfLOSs Counter32,
cSdslSturPerfLOSQs Counter32,
cSdslSturPerfCVs Counter32,
cSdslSturPerfESs Counter32,
cSdslSturPerfSESs Counter32,
cSdslSturPerfUASs Counter32,
cSdslSturPerfValidIntervals Integer32,
cSdslSturPerfInvalidIntervals Integer32,
cSdslSturPerfCurr15MinTimeElapse SdslPerfTimeElapsed,
cSdslSturPerfCurr15MinLOSs PerfCurrentCount,
cSdslSturPerfCurr15MinLOSQs PerfCurrentCount,
cSdslSturPerfCurr15MinCVs PerfCurrentCount,
cSdslSturPerfCurr15MinESs PerfCurrentCount,
cSdslSturPerfCurr15MinSESs PerfCurrentCount,
cSdslSturPerfCurr15MinUASs PerfCurrentCount,
cSdslSturPerfCurr1DayTimeElapsed SdslPerfTimeElapsed,
cSdslSturPerfCurr1DayLOSs SdslPerfCurrDayCount,
cSdslSturPerfCurr1DayLOSQs SdslPerfCurrDayCount,
cSdslSturPerfCurr1DayCVs SdslPerfCurrDayCount,
cSdslSturPerfCurr1DayESs SdslPerfCurrDayCount,
cSdslSturPerfCurr1DaySESs SdslPerfCurrDayCount,
cSdslSturPerfCurr1DayUASs SdslPerfCurrDayCount,
cSdslSturPerfPrev1DayMoniSecs Integer32,
cSdslSturPerfPrev1DayLOSs SdslPerfPrevDayCount,
cSdslSturPerfPrev1DayLOSQs SdslPerfPrevDayCount,
cSdslSturPerfPrev1DayCVs SdslPerfPrevDayCount,
cSdslSturPerfPrev1DayESs SdslPerfPrevDayCount,
cSdslSturPerfPrev1DaySESs SdslPerfPrevDayCount,
cSdslSturPerfPrev1DayUASs SdslPerfPrevDayCount
}
cSdslSturPerfLOSs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of LOS failures experienced
by the STU-R since agent reset."
::= { cSdslSturPerfDataEntry 1 }
cSdslSturPerfLOSQs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of LOSQ failures experienced
by the STU-R since agent reset."
::= { cSdslSturPerfDataEntry 2 }
cSdslSturPerfCVs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of coding violations
experienced by the STU-R since agent reset."
::= { cSdslSturPerfDataEntry 3 }
cSdslSturPerfESs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of errored seconds
experienced by the STU-R since agent reset."
::= { cSdslSturPerfDataEntry 4 }
cSdslSturPerfSESs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of severely errored
seconds experienced by the STU-R since agent reset."
::= { cSdslSturPerfDataEntry 5 }
cSdslSturPerfUASs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of unavailable seconds
experienced by the STU-R since agent reset."
::= { cSdslSturPerfDataEntry 6 }
cSdslSturPerfValidIntervals OBJECT-TYPE
SYNTAX Integer32 (0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of previous far end intervals for
which valid data was collected. The value will be
96 unless the interface was brought online within
the last 24 hours, in which case the value will be
the number of complete 15 minute far end
intervals since the interface has been online."
::= { cSdslSturPerfDataEntry 7 }
cSdslSturPerfInvalidIntervals OBJECT-TYPE
SYNTAX Integer32 (0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of far-end performance data 15-minute intervals in
the range from 0 to cSdslSturPerfValidIntervals for which no
data is available. This object will typically be zero except in
cases where the data for some intervals are not available (e.g.,
in proxy situations)."
::= { cSdslSturPerfDataEntry 8 }
cSdslSturPerfCurr15MinTimeElapse OBJECT-TYPE
SYNTAX SdslPerfTimeElapsed (0..899)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds that have elapsed since the beginning of
the current measurement period. If, for some reason, such as an
adjustment in the system's time-of-day clock, the current
interval exceeds the maximum value, the agent will return
the maximum value."
::= { cSdslSturPerfDataEntry 9 }
cSdslSturPerfCurr15MinLOSs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of seconds in the current
15-minute interval when the STU-R experienced LOS."
::= { cSdslSturPerfDataEntry 10 }
cSdslSturPerfCurr15MinLOSQs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of seconds in the current
15-minute interval when the STU-R experienced LOSQ."
::= { cSdslSturPerfDataEntry 11 }
cSdslSturPerfCurr15MinCVs OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of coding violations
experienced by the STU-R in the current 15-minute interval."
::= { cSdslSturPerfDataEntry 12 }
cSdslSturPerfCurr15MinESs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of errored seconds
experienced by the STU-R in the current 15-minute interval."
::= { cSdslSturPerfDataEntry 13 }
cSdslSturPerfCurr15MinSESs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of severely errored seconds
experienced by the STU-R in the current 15-minute interval."
::= { cSdslSturPerfDataEntry 14 }
cSdslSturPerfCurr15MinUASs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of unavailable seconds
experienced by the STU-R in the current 15-minute interval."
::= { cSdslSturPerfDataEntry 15 }
cSdslSturPerfCurr1DayTimeElapsed OBJECT-TYPE
SYNTAX SdslPerfTimeElapsed (0..86399)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds that have elapsed since the beginning of
the current measurement period. If, for some reason, such as an
adjustment in the system's time-of-day clock, the current
interval exceeds the maximum value, the agent will return
the maximum value."
::= { cSdslSturPerfDataEntry 16 }
cSdslSturPerfCurr1DayLOSs OBJECT-TYPE
SYNTAX SdslPerfCurrDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of seconds experienced by the
STU-R in the current 1-day interval when there was LOS."
::= { cSdslSturPerfDataEntry 17 }
cSdslSturPerfCurr1DayLOSQs OBJECT-TYPE
SYNTAX SdslPerfCurrDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of seconds experienced by the
STU-R in the current 1-day interval when there was LOSQ."
::= { cSdslSturPerfDataEntry 18 }
cSdslSturPerfCurr1DayCVs OBJECT-TYPE
SYNTAX SdslPerfCurrDayCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of coding violations
experienced by the STU-R in the current 1-day interval."
::= { cSdslSturPerfDataEntry 19 }
cSdslSturPerfCurr1DayESs OBJECT-TYPE
SYNTAX SdslPerfCurrDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of errored seconds
experienced by the STU-R in the current 1-day interval."
::= { cSdslSturPerfDataEntry 20 }
cSdslSturPerfCurr1DaySESs OBJECT-TYPE
SYNTAX SdslPerfCurrDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of severely errored seconds
experienced by the STU-R in the current 1-day interval."
::= { cSdslSturPerfDataEntry 21 }
cSdslSturPerfCurr1DayUASs OBJECT-TYPE
SYNTAX SdslPerfCurrDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of unavailable seconds
experienced by the STU-R in the current 1-day interval."
::= { cSdslSturPerfDataEntry 22 }
cSdslSturPerfPrev1DayMoniSecs OBJECT-TYPE
SYNTAX Integer32 (0..86400)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time in the previous 1-day interval over which
the performance monitoring information is actually counted.
This value will be the same as the interval duration except
in a situation where performance monitoring data could not be
collected for any reason."
::= { cSdslSturPerfDataEntry 23 }
cSdslSturPerfPrev1DayLOSs OBJECT-TYPE
SYNTAX SdslPerfPrevDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of seconds in the current
1-day interval when the STU-R experienced LOS."
::= { cSdslSturPerfDataEntry 24 }
cSdslSturPerfPrev1DayLOSQs OBJECT-TYPE
SYNTAX SdslPerfPrevDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of seconds in the previous
1-day interval when the STU-R experienced LOSQ."
::= { cSdslSturPerfDataEntry 25 }
cSdslSturPerfPrev1DayCVs OBJECT-TYPE
SYNTAX SdslPerfPrevDayCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of coding violations
experienced by the STU-R in the previous 1-day interval."
::= { cSdslSturPerfDataEntry 26 }
cSdslSturPerfPrev1DayESs OBJECT-TYPE
SYNTAX SdslPerfPrevDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of errored seconds
experienced by the STU-R in the previous 1-day interval."
::= { cSdslSturPerfDataEntry 27 }
cSdslSturPerfPrev1DaySESs OBJECT-TYPE
SYNTAX SdslPerfPrevDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of severely errored seconds
experienced by the STU-R in the previous 1-day interval."
::= { cSdslSturPerfDataEntry 28 }
cSdslSturPerfPrev1DayUASs OBJECT-TYPE
SYNTAX SdslPerfPrevDayCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of unavailable seconds
experienced by the STU-R in the previous 1-day interval."
::= { cSdslSturPerfDataEntry 29 }
-- SDSL STU-C Performance Data Interval Table
cSdslStucIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF CSdslStucIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains physical-layer statistics intervals for
STU-C class devices supported by the system. The interval
tables are modeled after RFC 2493, Textual Conventions for
MIB Modules Using Performance History Based on 15 Minute
Intervals, RFC 2493"
REFERENCE
"Tesink, K., Textual Conventions for MIB Modules Using
Performance History Based on 15 Minute Intervals, RFC 2493,
January 1999."
::= { ciscoSdslLineMIBObjects 8 }
cSdslStucIntervalEntry OBJECT-TYPE
SYNTAX CSdslStucIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 15-miute interval of physical-layer statistics for a STU-C
class device supported by the system. There exists up to 96
entries for each ifEntry with an ifType of sdsl(96)."
INDEX { ifIndex, cSdslStucIntervalNumber }
::= { cSdslStucIntervalTable 1 }
CSdslStucIntervalEntry ::= SEQUENCE {
cSdslStucIntervalNumber Integer32,
cSdslStucIntervalValidData TruthValue,
cSdslStucIntervalLOSs PerfIntervalCount,
cSdslStucIntervalLOSQs PerfIntervalCount,
cSdslStucIntervalCVs PerfIntervalCount,
cSdslStucIntervalESs PerfIntervalCount,
cSdslStucIntervalSESs PerfIntervalCount,
cSdslStucIntervalUASs PerfIntervalCount,
cSdslStucIntervalInits PerfIntervalCount,
cSdslStucIntervalUnavlRsrcs PerfIntervalCount
}
cSdslStucIntervalNumber OBJECT-TYPE
SYNTAX Integer32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interval in which the statistics were collected, where the
value of 1 represents the most recent interval, and the value of
96 represents the interval collected 24 hours ago. Intervals
2..96 are optional."
::= { cSdslStucIntervalEntry 1 }
cSdslStucIntervalValidData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies whether the data for this interval
is valid."
::= { cSdslStucIntervalEntry 2 }
cSdslStucIntervalLOSs OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of seconds in the interval
when the STU-C experienced LOS."
::= { cSdslStucIntervalEntry 3 }
cSdslStucIntervalLOSQs OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of seconds in the interval
when the STU-C experienced LOSQ."
::= { cSdslStucIntervalEntry 4 }
cSdslStucIntervalCVs OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of coding violations
experienced by the STU-C in the interval."
::= { cSdslStucIntervalEntry 5 }
cSdslStucIntervalESs OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of errored seconds
experienced by the STU-C in the interval."
::= { cSdslStucIntervalEntry 6 }
cSdslStucIntervalSESs OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of severely errored seconds
experienced by the STU-C in the interval."
::= { cSdslStucIntervalEntry 7 }
cSdslStucIntervalUASs OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of unavailable seconds
experienced by the STU-C in the interval."
::= { cSdslStucIntervalEntry 8 }
cSdslStucIntervalInits OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of line initializations
attempted by the STU-C in the interval."
::= { cSdslStucIntervalEntry 9 }
cSdslStucIntervalUnavlRsrcs OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of packets discarded on the
STU-C due to unavailable resources, such as lack of buffer
space in the interval."
::= { cSdslStucIntervalEntry 10 }
-- SDSL STU-R Perforamnce Data Interval Table
cSdslSturIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF CSdslSturIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains physical-layer statistics intervals for
STU-R class devices supported by the system. The interval
tables are modeled after RFC 2493, Textual Conventions for
MIB Modules Using Performance History Based on 15 Minute
Intervals, RFC 2493"
-- Note to implementor:
-- If the implementation does not support remote management
-- of STU-R class devices, then the agent must respond with
-- the appropriate error indicating that the instance does not
-- exist; that is, 'noSuchName' in response to a SNMPv1 get
-- request, and 'noSuchInstance' in response to a SNMPv2 get
-- request.
REFERENCE
"Tesink, K., Textual Conventions for MIB Modules Using
Performance History Based on 15 Minute Intervals, RFC 2493,
January 1999."
::= { ciscoSdslLineMIBObjects 9 }
cSdslSturIntervalEntry OBJECT-TYPE
SYNTAX CSdslSturIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 15-miute interval of physical-layer statistics for a STU-R
class device supported by the system. There exists up to 96
entries for each ifEntry with an ifType of sdsl(96)."
INDEX { ifIndex, cSdslSturIntervalNumber }
::= { cSdslSturIntervalTable 1 }
CSdslSturIntervalEntry ::= SEQUENCE {
cSdslSturIntervalNumber Integer32,
cSdslSturIntervalLOSs PerfIntervalCount,
cSdslSturIntervalLOSQs PerfIntervalCount,
cSdslSturIntervalCVs PerfIntervalCount,
cSdslSturIntervalESs PerfIntervalCount,
cSdslSturIntervalSESs PerfIntervalCount,
cSdslSturIntervalUASs PerfIntervalCount,
cSdslSturIntervalValidData TruthValue
}
cSdslSturIntervalNumber OBJECT-TYPE
SYNTAX Integer32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interval in which the statistics were collected, where the
value of 1 represents the most recent interval, and the value of
96 represents the interval collected 24 hours ago. Intervals
2..96 are optional."
::= { cSdslSturIntervalEntry 1 }
cSdslSturIntervalValidData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies whether the data for this interval
is valid."
::= { cSdslSturIntervalEntry 2 }
cSdslSturIntervalLOSs OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of seconds in the interval
when the STU-R experienced LOS."
::= { cSdslSturIntervalEntry 3 }
cSdslSturIntervalLOSQs OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of seconds in the interval
when the STU-R experienced LOSQ."
::= { cSdslSturIntervalEntry 4 }
cSdslSturIntervalCVs OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of coding violations
experienced by the STU-R in the interval."
::= { cSdslSturIntervalEntry 5 }
cSdslSturIntervalESs OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of errored seconds
experienced by the STU-R in the interval."
::= { cSdslSturIntervalEntry 6 }
cSdslSturIntervalSESs OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of severely errored seconds
experienced by the STU-R in the interval."
::= { cSdslSturIntervalEntry 7 }
cSdslSturIntervalUASs OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of unavailable seconds
experienced by the STU-R in the interval."
::= { cSdslSturIntervalEntry 8 }
-- SDSL Line Configuration Profile Table
cSdslLineConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF CSdslLineConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the adslLineConfProfileTable and contains
enterprise-specific SDSL line configuration information."
::= { ciscoSdslLineMIBObjects 14 }
cSdslLineConfProfileEntry OBJECT-TYPE
SYNTAX CSdslLineConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A configuration profile containing enterprise-specific SDSL
line configuration information."
INDEX { IMPLIED adslLineConfProfileName }
::= { cSdslLineConfProfileTable 1 }
CSdslLineConfProfileEntry ::= SEQUENCE {
cSdslLineMaxRate Integer32,
cSdslLineFramingMode INTEGER,
cSdslStucTargetSnrMgn Integer32,
cSdslStucMaxSnrMgn Integer32,
cSdslStucMinSnrMgn Integer32,
cSdslStucOutputPwr Integer32,
cSdslShdslLineMaxRate INTEGER,
cSdslStucPsdMaskType INTEGER,
cSdslStucAnnex INTEGER,
cSdslLineEquipmentType INTEGER,
cSdslLineAutoRateEnable TruthValue,
cSdslStucThresholdSnrMgn Integer32,
cSdslSturAnnex INTEGER
}
cSdslLineMaxRate OBJECT-TYPE
SYNTAX Integer32 (144000 |
272000 |
400000 |
528000 |
784000 |
1040000 |
1168000 |
1552000 |
2064000 |
2320000 )
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the desired line rate which the STU-C
will attempt to train at."
DEFVAL { 784000 }
::= { cSdslLineConfProfileEntry 1 }
cSdslLineFramingMode OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no frame format
other(2), --
hdsl(3), -- HDSL frame format for SDSL interaces
gShdsl(4), -- G.SHDSL frame format for G.SHDSL
hdsl2(5), -- HDSL2 frame format for HDSL2 interfaces
ds1(6) -- DS1 frame format for HDSL2 interfaces
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the desired Transmission Convergence
framing structure being used by the interface."
::= { cSdslLineConfProfileEntry 2 }
cSdslStucTargetSnrMgn OBJECT-TYPE
SYNTAX Integer32 (0..310)
UNITS "tenth dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the target SNR margin. This is the
desired noise margin the STU-C must achieve with a BER of
10-7 or better to successfully complete training. The value
for this object must be in multiples of 10. The specified
value will be rounded down to the nearest valid tenth dB
level if the value is not in multiples of 10."
DEFVAL { 0 }
::= { cSdslLineConfProfileEntry 3 }
cSdslStucMaxSnrMgn OBJECT-TYPE
SYNTAX Integer32 (0..310)
UNITS "tenth dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the maximum acceptable SNR margin.
If the noise margin exceeds this level, then the STU-C should
attempt to reduce its power output to optimize its operation.
The value for this object must be in multiples of 10. The
specified value will be rounded down to the nearest valid
tenth dB level if the value is not in multiples of 10."
DEFVAL { 90 }
::= { cSdslLineConfProfileEntry 4 }
cSdslStucMinSnrMgn OBJECT-TYPE
SYNTAX Integer32 (0..310)
UNITS "tenth dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the minimum acceptable SNR margin.
If the noise margin falls below this level, the STU-C will
retrain. The value for this object must be in multiples of 10.
The specified value will be rounded down to the nearest valid
tenth dB level if the value is not in multiples of 10."
DEFVAL { 0 }
::= { cSdslLineConfProfileEntry 5 }
cSdslStucOutputPwr OBJECT-TYPE
SYNTAX Integer32 (0..310)
UNITS "tenth dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the transmit power level used by
the STU-C. The value for this object must be in multiples
of 10. The specified value will be rounded down to the
nearest valid tenth dB level if the value is not in
multiples of 10."
DEFVAL { 130 }
::= { cSdslLineConfProfileEntry 6 }
cSdslShdslLineMaxRate OBJECT-TYPE
SYNTAX INTEGER { r2376000(2376000),
r2312000(2312000),
r2056000(2056000),
r1552000(1552000),
r1544000(1544000),
r1160000(1160000),
r1032000(1032000),
r784000(784000),
r776000(776000),
r520000(520000),
r392000(392000),
r264000(264000),
r200000(200000),
r136000(136000),
r72000(72000) }
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the desired line rate at which the
G.shdsl STU-C will attempt to train."
REFERENCE
"ITU Draft G.Shdsl, Single-Pair High Speed Digital Subscriber
Line(SHDSL) Transceivers"
DEFVAL { r776000 }
::= { cSdslLineConfProfileEntry 7 }
cSdslStucPsdMaskType OBJECT-TYPE
SYNTAX INTEGER {
symmetric(1),
asymmetric(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the PSD mask type for the transceiver.
For all values of the cSdslShdslLineMaxRate, the symmetric PSD
masktype is selectable. Asymmetric mask is only selectable for
the following rates: 776000, 784000, 1552000, 2056000, 2312000."
DEFVAL { symmetric }
::= { cSdslLineConfProfileEntry 8 }
cSdslStucAnnex OBJECT-TYPE
SYNTAX INTEGER {
annexA(1),
annexB(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the operating conditions for the port
of G.shdsl CO equipment . Annex A is optimized for conditions
typically encountered within the North American network,whereas
Annex B is optimized for conditions typically encountered
within the European network."
DEFVAL { annexA }
::= { cSdslLineConfProfileEntry 9 }
cSdslLineEquipmentType OBJECT-TYPE
SYNTAX INTEGER {
stuR(1),
stuC(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the type of the STU device ,either
STU-C or STU-R"
DEFVAL { stuR }
::= { cSdslLineConfProfileEntry 10 }
cSdslLineAutoRateEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies whether the device uses the rate
adaptive training mode."
DEFVAL { false }
::= { cSdslLineConfProfileEntry 11 }
cSdslStucThresholdSnrMgn OBJECT-TYPE
SYNTAX Integer32 (0..310)
UNITS "tenth dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the SNR margin threshold. An
appropriate alarm should be generated when the difference
between the actual SNR and the SNR required to maintain BER
of 10E-7 is less than this value. The value for this object
must be in multiples of 10. The specified value will be
rounded down to the nearest valid tenth dB level if the
value is not in multiples of 10.
If the agent implements the CISCO-ENTITY-ALARM-MIB, the alarm
generated should be through the mechanism defined by the
CISCO-ENTITY-ALARM-MIB. Furthermore, the default severity
of this alarm should be 'minor'."
DEFVAL { 30 }
::= { cSdslLineConfProfileEntry 12 }
cSdslSturAnnex OBJECT-TYPE
SYNTAX INTEGER {
annexA(1),
annexB(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the operating conditions for the port
of G.shdsl CPE equipment. Annex A is optimized for conditions
typically encountered within the North American network,whereas
Annex B is optimized for conditions typically encountered
within the European network."
DEFVAL { annexA }
::= { cSdslLineConfProfileEntry 13 }
-- Alarm Configuration Profile Table
cSdslLineAlarmConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF CSdslLineAlarmConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the adslLineAlarmConfProfileTable and
contains enterprise-specific SDSL line configuration information
pertaining to alarms."
::= { ciscoSdslLineMIBObjects 15 }
cSdslLineAlarmConfProfileEntry OBJECT-TYPE
SYNTAX CSdslLineAlarmConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A configuration profile containing enterprise-specific SDSL
line configuration information pertaining to alarms"
INDEX { IMPLIED adslLineAlarmConfProfileName }
::= { cSdslLineAlarmConfProfileTable 1 }
CSdslLineAlarmConfProfileEntry ::= SEQUENCE {
cSdslStucThreshMinRate Integer32,
cSdslStucThreshMinSnrMgn Integer32
}
cSdslStucThreshMinRate OBJECT-TYPE
SYNTAX Integer32 (0..310)
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the line rate threshold. When the
agent observes the line rate fall below this value, an
appropriate alarm should be generated.
The default value for this object should be the value of
the cSdslLineMaxRate object.
If the agent implements the CISCO-ENTITY-ALARM-MIB, the
alarm generated should be through the mechanism defined by
the CISCO-ENTITY-ALARM-MIB. Furthermore, the default
severity of this alarm should be 'minor'."
::= { cSdslLineAlarmConfProfileEntry 1 }
cSdslStucThreshMinSnrMgn OBJECT-TYPE
SYNTAX Integer32 (0..310)
UNITS "tenth dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the SNR margin threshold. When the
agent observes the received SNR margin fall below this value,
an appropriate alarm should be generated.
If the agent implements the CISCO-ENTITY-ALARM-MIB, the alarm
generated should be through the mechanism defined by the
CISCO-ENTITY-ALARM-MIB. Furthermore, the default severity
of this alarm should be 'minor'."
DEFVAL { 30 }
::= { cSdslLineAlarmConfProfileEntry 2 }
-- MIB Notification Definitions
ciscoSdslLineMIBNotificationsPrefix OBJECT IDENTIFIER ::=
{ ciscoSdslLineMIB 2 }
ciscoSdslLineMIBNotifications OBJECT IDENTIFIER ::=
{ ciscoSdslLineMIBNotificationsPrefix 0 }
-- MIB Conformance Statements
ciscoSdslLineMIBConformance OBJECT IDENTIFIER ::=
{ ciscoSdslLineMIB 3 }
ciscoSdslLineMIBCompliances OBJECT IDENTIFIER ::=
{ ciscoSdslLineMIBConformance 1 }
ciscoSdslLineMIBGroups OBJECT IDENTIFIER ::=
{ ciscoSdslLineMIBConformance 2 }
-- Compliance
ciscoSdslLineMIBStucCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities that implement the
CISCO-SDSL-LINE-MIB. Implementation of this MIB is mandatory
for any platform that supports one or more SDSL line
interfaces. This specification is replaced by
ciscoSdslLineMIBStucComplianceRev1"
MODULE -- this module
MANDATORY-GROUPS {
cSdslStucBasicGroup,
cSdslStucPMCounterGroup
}
GROUP cSdslStucRateAdaptiveGroup
DESCRIPTION
"The implementation of this group is optional. However,
this statement recommends the implementation of this group
if the STU-C supports rate adaptation."
GROUP cSdslSturGroup
DESCRIPTION
"The implementation of this group is optional. However,
this statement recommends the implementation of this group
if the STU-C and STU-R support a remote management
capability."
GROUP cSdslStucPM15MinIntervalGroup
DESCRIPTION
"The implementation of this group is optional."
GROUP cSdslStucPM1DayIntervalGroup
DESCRIPTION
"The implementation of this group is optional."
GROUP cSdslSturPMCounterGroup
DESCRIPTION
"The implementation of this group is optional. However,
this statement recommends the implementation of this group
if the STU-C and STU-R support a remote management
capability."
GROUP cSdslSturPM15MinIntervalGroup
DESCRIPTION
"The implementation of this group is optional."
GROUP cSdslSturPM1DayIntervalGroup
DESCRIPTION
"The implementation of this group is optional."
GROUP cSdslStucAlarmConfProfileGroup
DESCRIPTION
"The implementation of this group is optional. If the agent
implements the CISCO-ENTITY-ALARM-MIB, then this statement
strongly discourages the implementation of this group.
Rather the agent should define alarm types for physical
entities of the cevPortSdsl2b1q vendor type corresponding
to the conditions described by cSdslStucThreshMinRate
and cSdslStucThreshMinSnrMgn."
OBJECT cSdslLineConfProfile
MIN-ACCESS read-only
DESCRIPTION
"Read-only access is applicable only when implementing
static profiles."
OBJECT cSdslLineAlarmConfProfile
MIN-ACCESS read-only
DESCRIPTION
"Read-only access is applicable only when implementing
static profiles."
OBJECT cSdslStucThreshMinRate
MIN-ACCESS read-write
DESCRIPTION
"Read-write access is application when implementing static
profiles."
OBJECT cSdslStucThreshMinSnrMgn
MIN-ACCESS read-write
DESCRIPTION
"Read-write access is application when implementing static
profiles."
::= { ciscoSdslLineMIBCompliances 1 }
ciscoSdslLineMIBSturCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities that implement the
CISCO-SDSL-LINE-MIB and manage SDSL STU-R class devices.
Implementation of this MIB is mandatory for any platform
that supports one or more SDSL line interfaces. This
specification is replaced by
ciscoSdslLineMIBSturComplianceRev1."
MODULE -- this module
MANDATORY-GROUPS {
cSdslSturBasicGroup,
cSdslSturPMCounterGroup
}
GROUP cSdslSturPM15MinIntervalGroup
DESCRIPTION
"The implementation of this group is optional."
GROUP cSdslSturPM1DayIntervalGroup
DESCRIPTION
"The implementation of this group is optional."
::= { ciscoSdslLineMIBCompliances 2 }
ciscoSdslLineMIBStucComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that implement the
CISCO-SDSL-LINE-MIB. Implementation of this MIB is mandatory
for any platform that supports one or more SDSL line
interfaces."
MODULE -- this module
MANDATORY-GROUPS {
cSdslStucBasicGroupRev1,
cSdslStucPMCounterGroup
}
GROUP cSdslStucRateAdaptiveGroup
DESCRIPTION
"The implementation of this group is optional. However,
this statement recommends the implementation of this group
if the STU-C supports rate adaptation."
GROUP cSdslSturGroup
DESCRIPTION
"The implementation of this group is optional. However,
this statement recommends the implementation of this group
if the STU-C and STU-R support a remote management
capability."
GROUP cSdslStucPM15MinIntervalGroup
DESCRIPTION
"The implementation of this group is optional."
GROUP cSdslStucPM1DayIntervalGroup
DESCRIPTION
"The implementation of this group is optional."
GROUP cSdslSturPMCounterGroup
DESCRIPTION
"The implementation of this group is optional. However,
this statement recommends the implementation of this group
if the STU-C and STU-R support a remote management
capability."
GROUP cSdslSturPM15MinIntervalGroup
DESCRIPTION
"The implementation of this group is optional."
GROUP cSdslSturPM1DayIntervalGroup
DESCRIPTION
"The implementation of this group is optional."
GROUP cSdslStucAlarmConfProfileGroup
DESCRIPTION
"The implementation of this group is optional. If the agent
implements the CISCO-ENTITY-ALARM-MIB, then this statement
strongly discourages the implementation of this group.
Rather the agent should define alarm types for physical
entities of the cevPortSdsl2b1q vendor type corresponding
to the conditions described by cSdslStucThreshMinRate
and cSdslStucThreshMinSnrMgn."
OBJECT cSdslLineConfProfile
MIN-ACCESS read-only
DESCRIPTION
"Read-only access is applicable only when implementing
static profiles."
OBJECT cSdslLineAlarmConfProfile
MIN-ACCESS read-only
DESCRIPTION
"Read-only access is applicable only when implementing
static profiles."
OBJECT cSdslStucThreshMinRate
MIN-ACCESS read-write
DESCRIPTION
"Read-write access is application when implementing static
profiles."
OBJECT cSdslStucThreshMinSnrMgn
MIN-ACCESS read-write
DESCRIPTION
"Read-write access is application when implementing static
profiles."
::= { ciscoSdslLineMIBCompliances 3 }
ciscoSdslLineMIBSturComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that implement the
CISCO-SDSL-LINE-MIB and manage SDSL STU-R class devices.
Implementation of this MIB is mandatory for any platform
that supports one or more SDSL line interfaces."
MODULE -- this module
MANDATORY-GROUPS {
cSdslSturBasicGroupRev1,
cSdslSturPMCounterGroup
}
GROUP cSdslSturPM15MinIntervalGroup
DESCRIPTION
"The implementation of this group is optional."
GROUP cSdslSturPM1DayIntervalGroup
DESCRIPTION
"The implementation of this group is optional."
::= { ciscoSdslLineMIBCompliances 4 }
-- Units of Conformance
cSdslStucBasicGroup OBJECT-GROUP
OBJECTS {
cSdslLineCoding,
cSdslLineFraming,
cSdslLineSpecific,
cSdslLineConfProfile,
cSdslLineAlarmConfProfile,
cSdslStucInvSerialNumber,
cSdslStucInvVendorId,
cSdslStucInvVersionNumber,
cSdslStucState,
cSdslStucDefect,
cSdslStucCurrRate,
cSdslStucCurrSnrMgn,
cSdslStucCurrGain,
cSdslStucCurrOutputPwr,
cSdslStucCurrAtn,
cSdslLineMaxRate,
cSdslLineFramingMode,
cSdslStucTargetSnrMgn,
cSdslStucOutputPwr
}
STATUS deprecated
DESCRIPTION
"A collection of managed objects defining the basic operation
of an STU-C (i.e., no rate adaptation). This specification
is replaced by cSdslStucBasicGroupRev1."
::= { ciscoSdslLineMIBGroups 1 }
cSdslSturBasicGroup OBJECT-GROUP
OBJECTS {
cSdslLineCoding,
cSdslLineFraming,
cSdslLineSpecific,
cSdslSturInvSerialNumber,
cSdslSturInvVendorId,
cSdslSturInvVersionNumber,
cSdslSturState,
cSdslSturDefect,
cSdslSturCurrRate,
cSdslSturCurrSnrMgn,
cSdslSturCurrGain,
cSdslSturCurrOutputPwr,
cSdslSturCurrAtn
}
STATUS deprecated
DESCRIPTION
"A collection of managed objects defining the basic operation
of an STU-R.This specification is replaced by cSdslSturBasicGroupRev1"
::= { ciscoSdslLineMIBGroups 2 }
cSdslSturGroup OBJECT-GROUP
OBJECTS {
cSdslSturInvSerialNumber,
cSdslSturInvVendorId,
cSdslSturInvVersionNumber,
cSdslSturState,
cSdslSturDefect,
cSdslSturCurrRate,
cSdslSturCurrSnrMgn,
cSdslSturCurrGain,
cSdslSturCurrOutputPwr
}
STATUS deprecated
DESCRIPTION
"A collection of managed objects defining the capability to
remotely manage a STU-R. This is replaced by cSdslSturGroupRev1."
::= { ciscoSdslLineMIBGroups 3 }
cSdslStucPMCounterGroup OBJECT-GROUP
OBJECTS {
cSdslStucPerfLOSs,
cSdslStucPerfLOSQs,
cSdslStucPerfCVs,
cSdslStucPerfESs,
cSdslStucPerfSESs,
cSdslStucPerfUASs,
cSdslStucPerfInits,
cSdslStucUnavailRsrcs
}
STATUS current
DESCRIPTION
"A collection of managed objects defining basic near-end
performance monitoring capability."
::= { ciscoSdslLineMIBGroups 4 }
cSdslStucPM15MinIntervalGroup OBJECT-GROUP
OBJECTS {
cSdslStucPerfValidIntervals,
cSdslStucPerfInvalidIntervals,
cSdslStucPerfCurr15MinTimeElapse,
cSdslStucPerfCurr15MinLOSs,
cSdslStucPerfCurr15MinLOSQs,
cSdslStucPerfCurr15MinCVs,
cSdslStucPerfCurr15MinESs,
cSdslStucPerfCurr15MinSESs,
cSdslStucPerfCurr15MinUASs,
cSdslStucPerfCurr15MinInits,
cSdslStucPerfCurr15MinUnavlRsrcs,
cSdslStucIntervalValidData,
cSdslStucIntervalLOSs,
cSdslStucIntervalLOSQs,
cSdslStucIntervalCVs,
cSdslStucIntervalESs,
cSdslStucIntervalSESs,
cSdslStucIntervalUASs,
cSdslStucIntervalInits,
cSdslStucIntervalUnavlRsrcs
}
STATUS current
DESCRIPTION
"A collection of managed objects defining near-end performance
data collection capability using 15-minute intervals."
::= { ciscoSdslLineMIBGroups 5 }
cSdslStucPM1DayIntervalGroup OBJECT-GROUP
OBJECTS {
cSdslStucPerfCurr1DayTimeElapsed,
cSdslStucPerfCurr1DayLOSs,
cSdslStucPerfCurr1DayLOSQs,
cSdslStucPerfCurr1DayCVs,
cSdslStucPerfCurr1DayESs,
cSdslStucPerfCurr1DaySESs,
cSdslStucPerfCurr1DayUASs,
cSdslStucPerfCurr1DayInits,
cSdslStucPerfCurr1DayUnavlRsrcs,
cSdslStucPerfPrev1DayMoniSecs,
cSdslStucPerfPrev1DayLOSs,
cSdslStucPerfPrev1DayLOSQs,
cSdslStucPerfPrev1DayCVs,
cSdslStucPerfPrev1DayESs,
cSdslStucPerfPrev1DaySESs,
cSdslStucPerfPrev1DayUASs,
cSdslStucPerfPrev1DayInits,
cSdslStucPerfPrev1DayUnavlRsrcs
}
STATUS current
DESCRIPTION
"A collection of managed objects defining near-end performance
data collection capability using 1-day intervals."
::= { ciscoSdslLineMIBGroups 6 }
cSdslSturPMCounterGroup OBJECT-GROUP
OBJECTS {
cSdslSturPerfLOSs,
cSdslSturPerfLOSQs,
cSdslSturPerfCVs,
cSdslSturPerfESs,
cSdslSturPerfSESs,
cSdslSturPerfUASs
}
STATUS current
DESCRIPTION
"A collection of managed objects defining basic far-end
performance monitoring capability."
::= { ciscoSdslLineMIBGroups 7 }
cSdslSturPM15MinIntervalGroup OBJECT-GROUP
OBJECTS {
cSdslSturPerfValidIntervals,
cSdslSturPerfInvalidIntervals,
cSdslSturPerfCurr15MinTimeElapse,
cSdslSturPerfCurr15MinLOSs,
cSdslSturPerfCurr15MinLOSQs,
cSdslSturPerfCurr15MinCVs,
cSdslSturPerfCurr15MinESs,
cSdslSturPerfCurr15MinSESs,
cSdslSturPerfCurr15MinUASs,
cSdslSturIntervalLOSs,
cSdslSturIntervalLOSQs,
cSdslSturIntervalCVs,
cSdslSturIntervalESs,
cSdslSturIntervalSESs,
cSdslSturIntervalUASs,
cSdslSturIntervalValidData
}
STATUS current
DESCRIPTION
"A collection of managed objects defining far-end performance
data collection capability using 15-minute intervals."
::= { ciscoSdslLineMIBGroups 8 }
cSdslSturPM1DayIntervalGroup OBJECT-GROUP
OBJECTS {
cSdslSturPerfCurr1DayTimeElapsed,
cSdslSturPerfCurr1DayLOSs,
cSdslSturPerfCurr1DayLOSQs,
cSdslSturPerfCurr1DayCVs,
cSdslSturPerfCurr1DayESs,
cSdslSturPerfCurr1DaySESs,
cSdslSturPerfCurr1DayUASs,
cSdslSturPerfPrev1DayMoniSecs,
cSdslSturPerfPrev1DayLOSs,
cSdslSturPerfPrev1DayLOSQs,
cSdslSturPerfPrev1DayCVs,
cSdslSturPerfPrev1DayESs,
cSdslSturPerfPrev1DaySESs,
cSdslSturPerfPrev1DayUASs
}
STATUS current
DESCRIPTION
"A collection of managed objects defining far-end performance
data collection capability using 1-day intervals."
::= { ciscoSdslLineMIBGroups 9 }
cSdslStucRateAdaptiveGroup OBJECT-GROUP
OBJECTS {
cSdslStucCurrRate,
cSdslStucMaxSnrMgn,
cSdslStucMinSnrMgn,
cSdslStucThreshMinRate
}
STATUS current
DESCRIPTION
"A collection of managed objects defining rate adaptive
operation of an STU-C."
::= { ciscoSdslLineMIBGroups 10 }
cSdslStucAlarmConfProfileGroup OBJECT-GROUP
OBJECTS {
cSdslStucThreshMinRate,
cSdslStucThreshMinSnrMgn
}
STATUS current
DESCRIPTION
"A collection of traps generated by the agent to signal
threshold alarms."
::= { ciscoSdslLineMIBGroups 11 }
cSdslStucBasicGroupRev1 OBJECT-GROUP
OBJECTS {
cSdslLineCoding,
cSdslLineFraming,
cSdslLineSpecific,
cSdslLineConfProfile,
cSdslLineAlarmConfProfile,
cSdslStucInvSerialNumber,
cSdslStucInvVendorId,
cSdslStucInvVersionNumber,
cSdslStucState,
cSdslStucDefect,
cSdslStucCurrRate,
cSdslStucCurrSnrMgn,
cSdslStucCurrGain,
cSdslStucCurrOutputPwr,
cSdslStucCurrAtn,
cSdslLineMaxRate,
cSdslLineFramingMode,
cSdslStucTargetSnrMgn,
cSdslStucMaxSnrMgn,
cSdslStucMinSnrMgn,
cSdslStucOutputPwr,
cSdslShdslLineMaxRate,
cSdslStucPsdMaskType,
cSdslStucAnnex,
cSdslLineEquipmentType,
cSdslLineAutoRateEnable,
cSdslStucThresholdSnrMgn
}
STATUS deprecated
DESCRIPTION
"A collection of managed objects defining the basic operation
of an STU-C. This specification is replaced by
cSdslStucBasicGroupRev2."
::= { ciscoSdslLineMIBGroups 12 }
cSdslSturBasicGroupRev1 OBJECT-GROUP
OBJECTS {
cSdslLineCoding,
cSdslLineFraming,
cSdslSturInvSerialNumber,
cSdslSturInvVendorId,
cSdslSturInvVersionNumber,
cSdslSturState,
cSdslSturDefect,
cSdslSturCurrRate,
cSdslSturCurrSnrMgn,
cSdslSturCurrGain,
cSdslSturCurrOutputPwr,
cSdslSturCurrAtn,
cSdslShdslLineMaxRate,
cSdslLineEquipmentType,
cSdslLineAutoRateEnable,
cSdslSturAnnex
}
STATUS deprecated
DESCRIPTION
"A collection of managed objects defining the basic operation
of an STU-R. This specification is replaced by
cSdslSturBasicGroupRev2"
::= { ciscoSdslLineMIBGroups 13 }
cSdslStucBasicGroupRev2 OBJECT-GROUP
OBJECTS {
cSdslLineCoding,
cSdslLineFraming,
cSdslLineSpecific,
cSdslLineConfProfile,
cSdslLineAlarmConfProfile,
cSdslStucInvSerialNumber,
cSdslStucInvVendorId,
cSdslStucInvVersionNumber,
cSdslStucState,
cSdslStucDefect,
cSdslStucCurrRate,
cSdslStucCurrSnrMgn,
cSdslStucCurrGainRev,
cSdslStucCurrOutputPwr,
cSdslStucCurrAtn,
cSdslLineMaxRate,
cSdslLineFramingMode,
cSdslStucTargetSnrMgn,
cSdslStucMaxSnrMgn,
cSdslStucMinSnrMgn,
cSdslStucOutputPwr,
cSdslShdslLineMaxRate,
cSdslStucPsdMaskType,
cSdslStucAnnex,
cSdslLineEquipmentType,
cSdslLineAutoRateEnable,
cSdslStucThresholdSnrMgn
}
STATUS current
DESCRIPTION
"A collection of managed objects defining the basic operation
of an STU-C."
::= { ciscoSdslLineMIBGroups 14 }
cSdslSturBasicGroupRev2 OBJECT-GROUP
OBJECTS {
cSdslLineCoding,
cSdslLineFraming,
cSdslSturInvSerialNumber,
cSdslSturInvVendorId,
cSdslSturInvVersionNumber,
cSdslSturState,
cSdslSturDefect,
cSdslSturCurrRate,
cSdslSturCurrSnrMgn,
cSdslSturCurrGainRev,
cSdslSturCurrOutputPwr,
cSdslSturCurrAtn,
cSdslShdslLineMaxRate,
cSdslLineEquipmentType,
cSdslLineAutoRateEnable,
cSdslSturAnnex
}
STATUS current
DESCRIPTION
"A collection of managed objects defining the basic operation
of an STU-R."
::= { ciscoSdslLineMIBGroups 15 }
cSdslSturGroupRev1 OBJECT-GROUP
OBJECTS {
cSdslSturInvSerialNumber,
cSdslSturInvVendorId,
cSdslSturInvVersionNumber,
cSdslSturState,
cSdslSturDefect,
cSdslSturCurrRate,
cSdslSturCurrSnrMgn,
cSdslSturCurrGainRev,
cSdslSturCurrOutputPwr
}
STATUS current
DESCRIPTION
"A collection of managed objects defining the capability to
remotely manage a STU-R."
::= { ciscoSdslLineMIBGroups 16 }
END
Reference in New Issue View Git Blame Copy Permalink