MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-PAE-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

4047 lines
134 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-PAE-MIB: CISCO private MIB for IEEE 802.1x
--
-- September 2001, Binh P Le
--
-- Copyright (c) 2001-2009 by cisco Systems Inc.
-- All rights reserved.
-- ****************************************************************
CISCO-PAE-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,
MODULE-IDENTITY,
NOTIFICATION-TYPE,
Unsigned32
FROM SNMPv2-SMI
OBJECT-GROUP,
MODULE-COMPLIANCE,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TruthValue,
MacAddress,
RowStatus,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InetAddress,
InetAddressType
FROM INET-ADDRESS-MIB
dot1xPaePortEntry,
dot1xPaePortNumber,
dot1xAuthPaeState,
dot1xAuthConfigEntry,
PaeControlledPortStatus
FROM IEEE8021-PAE-MIB
InterfaceIndex
FROM IF-MIB
VlanIndex
FROM CISCO-VTP-MIB
CiscoURLString
FROM CISCO-TC
CnnEouPostureToken,
CnnEouPostureTokenString
FROM CISCO-NAC-TC-MIB
CpgPolicyNameOrEmpty
FROM CISCO-POLICY-GROUP-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoPaeMIB MODULE-IDENTITY
LAST-UPDATED "200912100000Z"
ORGANIZATION "Cisco System, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-ibns@cisco.com,
cs-lan-switch-snmp@cisco.com"
DESCRIPTION
"Cisco Port Access Entity (PAE) module for managing
IEEE Std 802.1x.
This MIB provides Port Access Entity information
that are either excluded by IEEE8021-PAE-MIB or
specific to Cisco products."
REVISION "200912100000Z"
DESCRIPTION
"Added cpaeSuppPortProfileGroup,
and cpaeSuppHostInfoGroup."
REVISION "200807070000Z"
DESCRIPTION
"Added TEXTUAL-CONVENTION CpaeAuthState.
Added enumerated value other(4) to cpaePortMode.
Added cpaeHostSessionIdGroup,
cpaeGuestVlanNotifEnableGroup,
cpaeGuestVlanNotifGroup,
cpaeAuthFailVlanNotifEnableGrp,
cpaeAuthFailVlanNotifGroup,
cpaeHostAuthInfoGroup,
cpaePortCapabilitiesConfigGroup,
cpaeDot1xSuppToGuestVlanGroup.
Deprecated cpaePortAuthFailVlanGroup, replaced by
cpaePortAuthFailVlanConfigGroup and
cpaePortAuthFailUserInfoGroup.
Deprecated cpaeCompliance8, replaced by cpaeCompliance9."
REVISION "200804090000Z"
DESCRIPTION
"Added cpaeMabAuditInfoGroup,
cpaeHostUrlRedirectGroup,
cpaeMabPortIpDevTrackConfGroup,
cpaePortIpDevTrackConfGroup,
cpaeWebAuthIpDevTrackingGroup,
cpaeWebAuthUnAuthTimeoutGroup,
cpaeGlobalAuthFailVlanGroup,
cpaeGlobalSecViolationGroup,
cpaeCriticalEapolConfigGroup.
Deprecated cpaeMacAuthBypassGroup and replace
it by cpaeMacAuthBypassPortEnableGroup, and
cpaeMacAuthBypassGroup4;
Deprecated cpaeAuthConfigGroup and replace it by
cpaeAuthIabConfigGroup, cpaeAuthConfigGroup3 and
cpaeAuthConfigGroup4.
Modified cpaeMacAuthBypassPortAuthState to add 'ipAwaiting'
and 'policyConfig' enum values."
REVISION "200704250000Z"
DESCRIPTION
"Added cpaeMacAuthBypassGroup3,
and cpaeHostPostureTokenGroup."
REVISION "200704160000Z"
DESCRIPTION
"Add cpaeHostInfoGroup3."
REVISION "200701270000Z"
DESCRIPTION
"Added 'aaaFail' state to
cpaeMacAuthBypassPortAuthState and
cpaeWebAuthHostState.
Added cpaePortAuthFailVlanGroup2,
cpaeWebAuthAaaFailGroup,
cpaeMacAuthBypassGroup2,
cpaePortEapolTestGroup,
cpaeHostInfoGroup2,
cpaeAuthConfigGroup2,
cpaeCriticalRecoveryDelayGroup,
cpaeMacAuthBypassCriticalGroup, and
cpaeWebAuthCriticalGroup.
Obsoleted cpaeHostInfoPostureToken object."
REVISION "200509220000Z"
DESCRIPTION
"Added cpaeGuestVlanGroup3, cpaePortAuthFailVlanGroup,
cpaePortOperVlanGroup, cpaeNoGuestVlanNotifEnableGrp,
cpaeNoAuthFailVlanNotifEnableGrp,
cpaeNoGuestVlanNotifGroup,
cpaeNoAuthFailVlanNotifGroup, cpaeMacAuthBypassGroup,
cpaeWebAuthGroup, cpaeAuthConfigGroup and
cpaeHostInfoGroup.
Deprecated cpaeInGuestVlan, cpaeGuestVlanGroup2."
REVISION "200404230000Z"
DESCRIPTION
"Modified the DESCRIPTION clauses of cpaeGuestVlanNumber
and cpaeGuestVlanId."
REVISION "200404010000Z"
DESCRIPTION
"Added cpaeUserGroupGroup and cpaeRadiusConfigGroup."
REVISION "200304080000Z"
DESCRIPTION
"Added cpaeGuestVlanGroup2 and cpaeShutdownTimeoutGroup.
Deprecated cpaeGuestVlanGroup."
REVISION "200210160000Z"
DESCRIPTION
"Added cpaePortEntryGroup and cpaeGuestVlanGroup.
Deprecated cpaeMultipleHostGroup."
REVISION "200105241016Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 220 }
cpaeMIBNotification OBJECT IDENTIFIER
::= { ciscoPaeMIB 0 }
cpaeMIBObject OBJECT IDENTIFIER
::= { ciscoPaeMIB 1 }
cpaeMIBConformance OBJECT IDENTIFIER
::= { ciscoPaeMIB 2 }
-- - Textual Conventions
ReAuthPeriodSource ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Source of the reAuthPeriod constant, used by the
802.1x Reauthentication Timer state machine.
local : local configured reauthentication period
specified by the object dot1xAuthReAuthPeriod
will be used.
server: the reauthentication period will be received
from the Authentication server.
auto : source of reauthentication period will be
decided by the system."
SYNTAX INTEGER {
local(1),
server(2),
auto(3)
}
CpaeAuthState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Authenticator PAE state machine value.
other :None of the following states.
initialize :The PAE state machine is being initialized.
disconnected :An explicit logoff request is received from
the Supplicant, or the number of permissible
reauthentication attempts has been exceeded.
connecting :Attempting to establish a communication
with a Supplicant.
authenticating:A Supplicant is being authenticated.
authenticated :The Authenticator has successfully
authenticated the Supplicant.
aborting :The authentication process is
prematurely aborted due to receipt of
a reauthentication request, or an
EAPOL-Start frame, or an EAPOL-Logoff
frame, or an authTimeout.
held :The state machine ignores and discards all
EAPOL packets, so as to discourage brute
force attacks. This state is entered from
the 'authenticating' state following an
authentication failure. At the expiration
of the quietWhile timer, the state machine
transitions to the 'connecting' state.
forceAuth :The port is set to Authorized, and a canned
EAP Success packet is sent to the Supplicant.
forceUnauth :The port is set to Unauthorized, and a
canned EAP Failure packet is sent to the
Supplicant. If EAP-Start messages
are received from the Supplicant, the
state is re-entered and further EAP Failure
messages are sent.
guestVlan :The port has been moved to a configured
Guest VLAN.
authFailVlan :The port has been moved to a configured
Authentication Failed VLAN.
criticalAuth :The port has been authorized by Critical
Authentication because RADIUS server is
not reachable, or does not response.
ipAwaiting :The port is waiting for an IP address from
DHCP server.
policyConfig :This state is entered from 'ipAwaiting'
state if an IP address is received and
the corresponding policies are being
installed.
authFinished :The port is set to Authorized by MAC
Authentication Bypass feature.
restart :The PAE state machine has been restarted.
authFallback :Fallback mechanism is applied to the
authentication process.
authCResult :Authentication completed and the validity
of the authorization features is checked.
authZSuccess :Authorization policies based on the
authentication result are applied. If the
policies are applied successfully then the
port is authorized otherwise unauthorized."
SYNTAX INTEGER {
other(1),
initialize(2),
disconnected(3),
connecting(4),
authenticating(5),
authenticated(6),
aborting(7),
held(8),
forceAuth(9),
forceUnauth(10),
guestVlan(11),
authFailVlan(12),
criticalAuth(13),
ipAwaiting(14),
policyConfig(15),
authFinished(16),
restart(17),
authFallback(18),
authCResult(19),
authZSuccess(20)
}
cpaePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpaePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of system level information for each port
supported by the Port Access Entity. An entry
appears in this table for each PAE port of this system.
This table contains additional objects for the
dot1xPaePortTable."
REFERENCE
"802.1X-2001 9.6.1,
802.1X-2004 9.6.1"
::= { cpaeMIBObject 1 }
cpaePortEntry OBJECT-TYPE
SYNTAX CpaePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing additional management information
applicable to a particular PAE port."
AUGMENTS { dot1xPaePortEntry }
::= { cpaePortTable 1 }
CpaePortEntry ::= SEQUENCE {
cpaeMultipleHost TruthValue,
cpaePortMode INTEGER,
cpaeGuestVlanNumber VlanIndex,
cpaeInGuestVlan TruthValue,
cpaeShutdownTimeoutEnabled TruthValue,
cpaePortAuthFailVlan VlanIndex,
cpaePortOperVlan VlanIndex,
cpaePortOperVlanType INTEGER,
cpaeAuthFailVlanMaxAttempts Unsigned32,
cpaePortCapabilitiesEnabled BITS
}
cpaeMultipleHost OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Specifies whether the port allows multiple-host
connection or not."
::= { cpaePortEntry 1 }
cpaePortMode OBJECT-TYPE
SYNTAX INTEGER {
singleHost(1),
multiHost(2),
multiAuth(3),
other(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the current mode of dot1x operation on
the port.
singleHost(1): port allows one host to connect
and authenticate.
multiHost(2) : port allows multiple hosts to
connect. Once a host is
authenticated, all remaining hosts
are also authorized.
multiAuth(3) : port allows multiple hosts to
connect and each host is
authenticated.
other(4) : none of the above. This is a
read-only value which can not
be used in set operation.
If the port security feature is enabled on the
interface, the configuration of the port security
(such as the number of the hosts allowed, the security
violation action, etc) will apply to the interface."
::= { cpaePortEntry 2 }
cpaeGuestVlanNumber OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Guest Vlan of the interface.
An interface with cpaePortMode value of 'singleHost'
will be moved to its Guest Vlan if the supplicant on
the interface is not capable of IEEE-802.1x
authentication.
A value of zero for this object indicates no Guest
Vlan configured for the interface."
::= { cpaePortEntry 3 }
cpaeInGuestVlan OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates whether the interface is in its Guest Vlan
or not.
The object is deprecated in favor of newly added
object cpaePortOperVlanType."
::= { cpaePortEntry 4 }
cpaeShutdownTimeoutEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether shutdown timeout feature is enabled
on the interface."
::= { cpaePortEntry 5 }
cpaePortAuthFailVlan OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Auth-Fail (Authentication Fail) Vlan of
the port. A port is moved to Auth-Fail Vlan if the
supplicant which support IEEE-802.1x authentication is
unsuccessfully authenticated.
A value of zero for this object indicates no Auth-Fail
Vlan configured for the port."
::= { cpaePortEntry 6 }
cpaePortOperVlan OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VlanIndex of the Vlan which is assigned to this
port via IEEE-802.1x and related methods of
authentication supported by the system.
A value of zero for this object indicates that no
Vlan is assigned to this port via IEEE-802.1x
authentication."
::= { cpaePortEntry 7 }
cpaePortOperVlanType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
none(2),
guest(3),
authFail(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the Vlan which is assigned to this port
via IEEE-802.1x and related methods of authentication
supported by the system.
A value of 'other' for this object indicates type of
Vlan assigned to this port; via IEEE-802.1x
authentication; is other than the ones specified by
listed enumerations for this object.
A value of 'none' for this object indicates that there
is no Vlan assigned to this port via IEEE-802.1x
authentication. For such a case, corresponding value
of cpaePortOperVlan object will be zero.
A value of 'guest' for this object indicates that Vlan
assigned to this port; via IEEE-802.1x authentication;
is of type Guest Vlan and specified by the object
cpaeGuestVlanNumber for this entry.
A value of 'authFail' for this object indicates that
Vlan assigned to this port; via IEEE-802.1x
authentication; is of type Auth-Fail Vlan and
specified by the object cpaePortAuthFailVlan for
this entry."
::= { cpaePortEntry 8 }
cpaeAuthFailVlanMaxAttempts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum number of authentication attempts
should be made before the port is moved into the
Auth-Fail Vlan."
::= { cpaePortEntry 9 }
cpaePortCapabilitiesEnabled OBJECT-TYPE
SYNTAX BITS {
authenticator(0),
supplicant(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the type of PAE functionality of the port
which are enabled.
authenticator: PAE Authenticator functions are enabled.
supplicant : PAE Supplicant functions are enabled.
Only those supported PAE functions which are listed
in the corresponding instance of dot1xPaePortCapabilities
can be enabled."
REFERENCE
"802.1X-2001 9.6.1, PAE Capabilities,
802.1X-2004 9.6.1, PAE Capabilities"
::= { cpaePortEntry 10 }
cpaeGuestVlanId OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Specifies the Guest Vlan of the system.
An interface with cpaePortMode value of 'singleHost'
will be moved to Guest Vlan if the supplicant on the
interface is not IEEE-802.1x capable.
A value of zero indicates no Guest Vlan configured in
the system.
If the platform supports per-port guest Vlan ID
configuration, this object is not instantiated."
::= { cpaeMIBObject 2 }
cpaeShutdownTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the shutdown timeout interval to enable the
interface automatically in case it is shutdown due to
security violation.
If the value of this object is 0, the interfaces
shutdown due to the security violation will not be
enabled automatically.
The value of this object is applicable to the
interface only when cpaeShutdownTimeoutEnabled is
'true', and port security feature is disabled on the
interface."
::= { cpaeMIBObject 3 }
cpaeRadiusAccountingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies if RADIUS accounting is enabled for 802.1x
on this devices."
::= { cpaeMIBObject 4 }
cpaeUserGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpaeUserGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Group Manager and authenticated users
information on the device."
::= { cpaeMIBObject 5 }
cpaeUserGroupEntry OBJECT-TYPE
SYNTAX CpaeUserGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an 802.1x authenticated user on the
devices."
INDEX {
cpaeUserGroupName,
cpaeUserGroupUserIndex
}
::= { cpaeUserGroupTable 1 }
CpaeUserGroupEntry ::= SEQUENCE {
cpaeUserGroupName SnmpAdminString,
cpaeUserGroupUserIndex Unsigned32,
cpaeUserGroupUserName SnmpAdminString,
cpaeUserGroupUserAddrType InetAddressType,
cpaeUserGroupUserAddr InetAddress,
cpaeUserGroupUserInterface InterfaceIndex,
cpaeUserGroupUserVlan VlanIndex
}
cpaeUserGroupName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..100))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the name of the group that the user
belongs to."
::= { cpaeUserGroupEntry 1 }
cpaeUserGroupUserIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of an user within a group."
::= { cpaeUserGroupEntry 2 }
cpaeUserGroupUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the name of the user authenticated on a
port of the device."
::= { cpaeUserGroupEntry 3 }
cpaeUserGroupUserAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the type of address used to determine
the address of the user."
::= { cpaeUserGroupEntry 4 }
cpaeUserGroupUserAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the address of the host that the user
logging from."
::= { cpaeUserGroupEntry 5 }
cpaeUserGroupUserInterface OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the interface index that the user is
authenticated on."
::= { cpaeUserGroupEntry 6 }
cpaeUserGroupUserVlan OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the vlan that the user belongs to."
::= { cpaeUserGroupEntry 7 }
cpaeAuthFailUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpaeAuthFailUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to list user information for each port on
the system supported by the Port Access Entity and
assigned to Auth-Fail Vlan."
::= { cpaeMIBObject 6 }
cpaeAuthFailUserEntry OBJECT-TYPE
SYNTAX CpaeAuthFailUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each PAE port on
the system which is assigned to Vlan of type
'authFail' via IEEE-802.1x authentication."
INDEX { dot1xPaePortNumber }
::= { cpaeAuthFailUserTable 1 }
CpaeAuthFailUserEntry ::= SEQUENCE {
cpaeAuthFailUserName SnmpAdminString
}
cpaeAuthFailUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the name of the user who failed IEEE-802.1x
authentication and hence now assigned to Auth-Fail
Vlan.
The Auth-Fail Vlan to which the user belongs is
determined by the value of object cpaePortAuthFailVlan
for this port."
::= { cpaeAuthFailUserEntry 1 }
-- Notifications Control
cpaeNotificationControl OBJECT IDENTIFIER
::= { cpaeMIBObject 7 }
cpaeNoGuestVlanNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the system produces
the cpaeNoGuestVlanNotif.
A 'false' value will prevent cpaeNoGuestVlanNotif from
being generated by this system."
::= { cpaeNotificationControl 1 }
cpaeNoAuthFailVlanNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the system produces
the cpaeNoAuthFailVlanNotif.
A 'false' value will prevent cpaeNoAuthFailVlanNotif
from being generated by this system."
::= { cpaeNotificationControl 2 }
cpaeGuestVlanNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the system produces
the cpaeGuestVlanNotif.
A 'false' value will prevent cpaeGuestVlanNotif from
being generated by this system."
::= { cpaeNotificationControl 3 }
cpaeAuthFailVlanNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the system produces
the cpaeAuthFailVlanNotif.
A 'false' value will prevent cpaeAuthFailVlanNotif from
being generated by this system."
::= { cpaeNotificationControl 4 }
-- MAC Authentication Bypass feature
cpaeMacAuthBypass OBJECT IDENTIFIER
::= { cpaeMIBObject 8 }
cpaeMacAuthBypassReAuthTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the waiting time before reauthentication is
triggered on all MAC Auth-bypass authenticated ports."
::= { cpaeMacAuthBypass 1 }
cpaeMacAuthBypassReAuthEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The reauthentication control for all MAC Auth-bypass
ports. Setting this object to 'true' causes every MAC
Auth-Bypass authenticated port to reauthenticate the
device connecting to the port, after every period of
time specified by the object
cpaeMacAuthBypassReAuthTimeout. Setting this object
to 'false' will disable the MAC Auth-Bypass global
reauthentication."
::= { cpaeMacAuthBypass 2 }
cpaeMacAuthBypassViolation OBJECT-TYPE
SYNTAX INTEGER {
restrict(1),
shutdown(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action upon reception of a security
violation event.
restrict(1): Packets from MAC address of the
device causing security violation
will be dropped.
shutdown(2): The port that causes security
violation will be shutdown."
::= { cpaeMacAuthBypass 3 }
cpaeMacAuthBypassShutdownTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies time before a port is auto-enabled after
being shutdown due to a MAC Auth-bypass security
violation."
::= { cpaeMacAuthBypass 4 }
cpaeMacAuthBypassAuthFailTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the time a MAC Auth-bypass unauthenticated
port waits before trying the authentication process
again."
::= { cpaeMacAuthBypass 5 }
cpaeMacAuthBypassPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpaeMacAuthBypassPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of MAC Authentication Bypass (MAC
Auth-Bypass) configuration and information for
ports in the device."
::= { cpaeMacAuthBypass 6 }
cpaeMacAuthBypassPortEntry OBJECT-TYPE
SYNTAX CpaeMacAuthBypassPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information for
MAC Auth-Bypass feature on a port."
INDEX { dot1xPaePortNumber }
::= { cpaeMacAuthBypassPortTable 1 }
CpaeMacAuthBypassPortEntry ::= SEQUENCE {
cpaeMacAuthBypassPortEnabled TruthValue,
cpaeMacAuthBypassPortInitialize TruthValue,
cpaeMacAuthBypassPortReAuth TruthValue,
cpaeMacAuthBypassPortMacAddress MacAddress,
cpaeMacAuthBypassPortAuthState INTEGER,
cpaeMacAuthBypassPortTermAction INTEGER,
cpaeMacAuthBypassSessionTimeLeft Unsigned32,
cpaeMacAuthBypassPortAuthMethod INTEGER,
cpaeMacAuthBypassPortSessionId SnmpAdminString,
cpaeMacAuthBypassPortUrlRedirect SnmpAdminString,
cpaeMacAuthBypassPortPostureTok CnnEouPostureTokenString
}
cpaeMacAuthBypassPortEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether MAC Auth-Bypass is enabled
on the port."
::= { cpaeMacAuthBypassPortEntry 1 }
cpaeMacAuthBypassPortInitialize OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The initialization control for this port. Setting
this object to 'true' causes the MAC Auth-bypass
state machine to be initialized on the port. Setting
this object to 'false' has no effect.
This object always returns 'false' when it is read."
::= { cpaeMacAuthBypassPortEntry 2 }
cpaeMacAuthBypassPortReAuth OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The reauthentication control for this port. Setting
this object to 'true' causes the MAC address of the
device connecting to the port to be reauthenticated.
Setting this object to 'false' has no effect.
This object always returns 'false' when it is read."
::= { cpaeMacAuthBypassPortEntry 3 }
cpaeMacAuthBypassPortMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the MAC address of the device connecting
to the port."
::= { cpaeMacAuthBypassPortEntry 4 }
cpaeMacAuthBypassPortAuthState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
waiting(2),
authenticating(3),
authenticated(4),
fail(5),
finished(6),
aaaFail(7),
ipAwaiting(8),
policyConfig(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current state of the MAC Auth-Bypass
state machine.
other(1) : An unknown state.
waiting(2) : Waiting to receive the MAC address
that needs to be authenticated.
authenticating(3): In authentication process.
authenticated(4) : MAC address of the device connecting
to the port is authenticated.
fail(5) : MAC Auth-bypass authentication
failed. Port waits for a period of
time before moving to the 'waiting'
state, if there is no other
authentication features available
in the system.
finished(6) : MAC Auth-bypass authentication
failed. Port is authenticated by
another authentication feature.
aaaFail(7) : AAA server is not reachable after
sending the authentication request
or after the expiration of
re-authentication timeout, with IAB
(Inaccessible Authentication Bypass)
enabled on the port.
ipAwaiting(8) : Corresponding QoS/Security ACLs and other
Vendor Specific Attributes are being
configured on the port, after which IP
address will be obtained via DHCP snooping
or ARP inspection.
policyConfig(9) : Policy Groups or downloaded ACLs are being
configured on the port."
::= { cpaeMacAuthBypassPortEntry 5 }
cpaeMacAuthBypassPortTermAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
init(2),
reauth(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the termination action received from RADIUS
server that will be applied on the port when the
current session timeout expired.
other : none of the following.
init : current session will be terminated and a new
authentication process will be initiated.
reauth: reauthentication will be applied without
terminating the current session."
::= { cpaeMacAuthBypassPortEntry 6 }
cpaeMacAuthBypassSessionTimeLeft OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the leftover time of the current MAC
Auth-Bypass session on this port."
::= { cpaeMacAuthBypassPortEntry 7 }
cpaeMacAuthBypassPortAuthMethod OBJECT-TYPE
SYNTAX INTEGER {
radius(1),
eap(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the authentication method used by
MAC Authentication Bypass.
radius(1) : communication with authentication server
is performed via RADIUS messages.
eap(2) : communication with authentication server
is performed via EAP messages."
::= { cpaeMacAuthBypassPortEntry 8 }
cpaeMacAuthBypassPortSessionId OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the session ID of the MAC Auth-Bypass
Audit session on the port. A zero length string will be
returned for this object if value of the corresponding instance
of cpaeMacAuthBypassPortEnabled is 'false'."
::= { cpaeMacAuthBypassPortEntry 9 }
cpaeMacAuthBypassPortUrlRedirect OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the URL of an Audit server, provided by AAA
server, to which a MAC auth-Bypass host will be
redirected to when an Audit session starts off. A
zero-length string indicates that the audit process will
be performed via port scan instead, or value of the
corresponding instance of cpaeMacAuthBypassPortEnabled is
'false'."
::= { cpaeMacAuthBypassPortEntry 10 }
cpaeMacAuthBypassPortPostureTok OBJECT-TYPE
SYNTAX CnnEouPostureTokenString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Posture Token assigned to the MAC
Auth-Bypass host connected to this port. A zero length string
will be returned for this object if value of the corresponding
instance of cpaeMacAuthBypassPortEnabled is 'false'."
::= { cpaeMacAuthBypassPortEntry 11 }
cpaeMacAuthBypassAcctEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies if accounting is enabled for Mac
Authentication Bypass feature on this device."
::= { cpaeMacAuthBypass 7 }
cpaeMabCriticalRecoveryDelay OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milli-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the critical recovery delay
time for Mac Authentication Bypass in the system. A
value of zero indicates that critical recovery delay
for MAC Authentication Bypass is disabled."
::= { cpaeMacAuthBypass 8 }
cpaeMabPortIpDevTrackConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpaeMabPortIpDevTrackConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of IP Device Tracking configuration for MAC
Auth-Bypass interfaces in the system."
::= { cpaeMacAuthBypass 9 }
cpaeMabPortIpDevTrackConfEntry OBJECT-TYPE
SYNTAX CpaeMabPortIpDevTrackConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of MAC Auth-Bypass configuration for IP Device
Tracking on an MAC Auth-Bypass capable interface."
INDEX { dot1xPaePortNumber }
::= { cpaeMabPortIpDevTrackConfTable 1 }
CpaeMabPortIpDevTrackConfEntry ::= SEQUENCE {
cpaeMabPortIpDevTrackEnabled TruthValue
}
cpaeMabPortIpDevTrackEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether IP Device Tracking is enabled or not on this
port for the corresponding MAC Auth-bypass authenticated host."
::= { cpaeMabPortIpDevTrackConfEntry 1 }
-- Web Based Proxy Authentication feature
cpaeWebAuth OBJECT IDENTIFIER
::= { cpaeMIBObject 9 }
cpaeWebAuthEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether Web Proxy Authentication is enabled
in the system."
::= { cpaeWebAuth 1 }
cpaeWebAuthSessionPeriod OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Web Proxy Authentication session period
for the system. Session period is the time after which
an Web Proxy Authenticated session is terminated."
::= { cpaeWebAuth 2 }
cpaeWebAuthLoginPage OBJECT-TYPE
SYNTAX CiscoURLString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the customized login page for Web Proxy
Authentication, in the format of an URL.
A customized login page is required to support the same
input fields as the default login page for users to
input credentials.
If this object contains a zero length string, the
default login page will be used."
::= { cpaeWebAuth 3 }
cpaeWebAuthLoginFailedPage OBJECT-TYPE
SYNTAX CiscoURLString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the customized login-failed page for Web
Proxy Authentication, in the format of an URL.
Login-failed page is sent back to the client upon an
authentication failure. A login-failed page requires to
have all the input fields of the login page, in
addition to the authentication failure information.
If this object contains a zero length string, the
default login-failed page will be used."
::= { cpaeWebAuth 4 }
cpaeWebAuthQuietPeriod OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the time a Web Proxy Authentication state
machine will be held in 'blackListed' state after
maximum authentication attempts."
::= { cpaeWebAuth 5 }
cpaeWebAuthMaxRetries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum number of unsuccessful login
attempts a user is allowed to make."
::= { cpaeWebAuth 6 }
cpaeWebAuthPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpaeWebAuthPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Web Proxy Authentication configuration and
information for the feature capable ports in the
device."
::= { cpaeWebAuth 7 }
cpaeWebAuthPortEntry OBJECT-TYPE
SYNTAX CpaeWebAuthPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information for Web
Proxy Authentication feature on a port."
INDEX { dot1xPaePortNumber }
::= { cpaeWebAuthPortTable 1 }
CpaeWebAuthPortEntry ::= SEQUENCE {
cpaeWebAuthPortEnabled TruthValue,
cpaeWebAuthPortInitialize TruthValue,
cpaeWebAuthPortAaaFailPolicy CpgPolicyNameOrEmpty,
cpaeWebAuthPortIpDevTrackEnabled TruthValue
}
cpaeWebAuthPortEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether Web Proxy Authentication is
enabled on the port."
::= { cpaeWebAuthPortEntry 1 }
cpaeWebAuthPortInitialize OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The initialization control for this port. Setting this
object to 'true' causes Web Proxy Authentication state
machine to be initialized for all the hosts connecting
to the port. Setting this object to 'false' has no
effect.
This object always returns 'false' when it is read."
::= { cpaeWebAuthPortEntry 2 }
cpaeWebAuthPortAaaFailPolicy OBJECT-TYPE
SYNTAX CpgPolicyNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the policy name to be applied on the port
when the corresponding cpaeWebAuthHostState is
'aaaFail'. The specified policy name must either be
an existing entry in cpgPolicyTable defined in
CISCO-POLICY-GROUP-MIB, or an empty string which
indicates that there will be no policy name
applied on the port when the corresponding
cpaeWebAuthHostState is 'aaaFail'."
::= { cpaeWebAuthPortEntry 3 }
cpaeWebAuthPortIpDevTrackEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether IP Device Tracking is enabled or not on this
port for the corresponding Web Proxy authenticated host."
::= { cpaeWebAuthPortEntry 4 }
cpaeWebAuthHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpaeWebAuthHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Web Proxy Authentication information for
hosts currently managed by the feature. An entry is
added to the table when a host is detected and Web
Proxy Authentication state machine is initiated for
the host."
::= { cpaeWebAuth 8 }
cpaeWebAuthHostEntry OBJECT-TYPE
SYNTAX CpaeWebAuthHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information for Web
Proxy Authentication feature on a host."
INDEX {
dot1xPaePortNumber,
cpaeWebAuthHostAddrType,
cpaeWebAuthHostAddress
}
::= { cpaeWebAuthHostTable 1 }
CpaeWebAuthHostEntry ::= SEQUENCE {
cpaeWebAuthHostAddrType InetAddressType,
cpaeWebAuthHostAddress InetAddress,
cpaeWebAuthAaaSessionPeriod Unsigned32,
cpaeWebAuthHostSessionTimeLeft Unsigned32,
cpaeWebAuthHostState INTEGER,
cpaeWebAuthHostInitialize TruthValue
}
cpaeWebAuthHostAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the Internet address type for the host."
::= { cpaeWebAuthHostEntry 1 }
cpaeWebAuthHostAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the Internet address for the host. The type
of this address is determined by the value of
cpaeWebAuthHostAddrType."
::= { cpaeWebAuthHostEntry 2 }
cpaeWebAuthAaaSessionPeriod OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the session period for a Web Proxy
Authenticated session on this host, supplied by the
AAA server. If value of this object is none zero,
it will take precedence over the period specified
by cpaeWebAuthPortSessionPeriod."
::= { cpaeWebAuthHostEntry 3 }
cpaeWebAuthHostSessionTimeLeft OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the leftover time of the current Web Proxy
Authenticated session for this host."
::= { cpaeWebAuthHostEntry 4 }
cpaeWebAuthHostState OBJECT-TYPE
SYNTAX INTEGER {
initialize(1),
connecting(2),
authenticating(3),
authenticated(4),
authFailed(5),
parseError(6),
sessionTimeout(7),
blackListed(8),
aaaFail(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current state of the Web Proxy
Authentication state machine.
initialize : Initial state of the Web Proxy
Authentication state machine.
connecting : Login page is sent to the client,
waiting for response from the client.
authenticating: Credentials are extracted from client's
response and authenticating with the
AAA server.
authenticated : Web Proxy Authentication succeeded.
Session timer is started, policies are
applied, and success page is sent back
to client.
authFailed : Web Proxy Authentication failed. Login
page is resent with authentication
failure information embedded, if retry
count has not exceeded the maximum
number of retry attempts. Otherwise,
move to 'blackListed' state.
parseError : Failed to extract user's credentials
from the client's response.
sessionTimeout: Session timer expired, user's policies
are removed, state machine will moves
to 'initialize' state after that.
blackListed : Web Proxy Authentication retry count
has exceeded the maximum number of
retry attempts. Only setting the state
machine to 'initialize' will take it
out of this state.
aaaFail : AAA server is not reachable after
sending the authentication request, or
after host has been in 'blackListed'
state for the period of time specified
by cpaeWebAuthQuietPeriod, with IAB
(Inaccessible Authentication Bypass)
enabled on the corresponding port
connected to the host."
::= { cpaeWebAuthHostEntry 5 }
cpaeWebAuthHostInitialize OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The initialization control for this host. Setting this
object to 'true' causes Web Proxy Authentication state
machine to be initialized for the host. Setting this
object to 'false' has no effect.
This object always returns 'false' when it is read."
::= { cpaeWebAuthHostEntry 6 }
cpaeWebAuthCriticalRecoveryDelay OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milli-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the critical recovery delay
time for Web Proxy Authentication in the system. A value
of zero indicates that critical recovery delay for Web
Proxy Authentication is disabled."
::= { cpaeWebAuth 9 }
cpaeWebAuthUnAuthStateTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The authentication timeout period for Web Proxy
Authentication. Once a host enters 'initialize' state as
indicated by its corresponding cpaeWebAuthHostState,
such host will be removed if it can not be authenticated
within the timeout period."
::= { cpaeWebAuth 10 }
-- LAN Port 802.1x
cpaeAuthConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpaeAuthConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the configuration objects for the
Authenticator PAE associated with each port. An entry
appears in this table for each PAE port that may
authenticate access to itself. This table contain
additional objects for the dot1xAuthConfigTable."
::= { cpaeMIBObject 10 }
cpaeAuthConfigEntry OBJECT-TYPE
SYNTAX CpaeAuthConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing additional management information
applicable to a particular Authenticator PAE."
AUGMENTS { dot1xAuthConfigEntry }
::= { cpaeAuthConfigTable 1 }
CpaeAuthConfigEntry ::= SEQUENCE {
cpaeAuthReAuthPeriodSrcAdmin ReAuthPeriodSource,
cpaeAuthReAuthPeriodSrcOper ReAuthPeriodSource,
cpaeAuthReAuthPeriodOper Unsigned32,
cpaeAuthTimeToNextReAuth Unsigned32,
cpaeAuthReAuthAction INTEGER,
cpaeAuthReAuthMax Unsigned32,
cpaeAuthIabEnabled TruthValue,
cpaeAuthPaeState CpaeAuthState
}
cpaeAuthReAuthPeriodSrcAdmin OBJECT-TYPE
SYNTAX ReAuthPeriodSource
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the source of the reAuthPeriod constant to
be used by the Reauthentication Timer state machine."
::= { cpaeAuthConfigEntry 1 }
cpaeAuthReAuthPeriodSrcOper OBJECT-TYPE
SYNTAX ReAuthPeriodSource
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the source of the reAuthPeriod constant
currently in use by the Reauthentication Timer state
machine."
::= { cpaeAuthConfigEntry 2 }
cpaeAuthReAuthPeriodOper OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operational reauthentication period
for this port."
::= { cpaeAuthConfigEntry 3 }
cpaeAuthTimeToNextReAuth OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the leftover time of the current session
for this port."
::= { cpaeAuthConfigEntry 4 }
cpaeAuthReAuthAction OBJECT-TYPE
SYNTAX INTEGER {
terminate(1),
reAuth(2),
noReAuth(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the reauthentication action for this port.
terminate: Session will be terminated, with the
corresponding Authenticator PAE state
machine transits to 'disconnected'.
reAuth : The port will be reauthenticated.
noReAuth : The port will not be reauthenticated."
::= { cpaeAuthConfigEntry 5 }
cpaeAuthReAuthMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the number of reauthentication
attempts that are permitted before the port becomes
unauthorized.
The value of this object is used as the reAuthMax
constant by the Authenticator PAE state machine."
REFERENCE "IEEE Std 802.1X-2004, 8.2.4.1.2, reAuthMax"
::= { cpaeAuthConfigEntry 6 }
cpaeAuthIabEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the PAE port is declared as
Inaccessible Authentication Bypass (IAB). IAB ports
will be granted network access via the administrative
configured VLAN if it failed to connect to the
Authentication server. The only way to bring an IAB
port back to the Backend Authentication state machine
is through setting dot1xPaePortInitialize in the
corresponding entry in dot1xPaePortTable to 'true'.
802.1x reauthentication will be temporary disabled on
an authenticated IAB port if the connection to
the Authentication server is broken, and enable again
when the connection is resumed."
::= { cpaeAuthConfigEntry 7 }
cpaeAuthPaeState OBJECT-TYPE
SYNTAX CpaeAuthState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current value of the Authenticator PAE
state machine on the port."
::= { cpaeAuthConfigEntry 8 }
cpaeHostInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpaeHostInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing 802.1x authentication information
for hosts connecting to PAE ports in the system."
::= { cpaeMIBObject 11 }
cpaeHostInfoEntry OBJECT-TYPE
SYNTAX CpaeHostInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in the table for each 802.1x capable
host connecting to an PAE port, providing its
authentication information."
INDEX {
dot1xPaePortNumber,
cpaeHostInfoHostIndex
}
::= { cpaeHostInfoTable 1 }
CpaeHostInfoEntry ::= SEQUENCE {
cpaeHostInfoHostIndex Unsigned32,
cpaeHostInfoMacAddress MacAddress,
cpaeHostInfoPostureToken CnnEouPostureToken,
cpaeHostInfoUserName SnmpAdminString,
cpaeHostInfoAddrType InetAddressType,
cpaeHostInfoAddr InetAddress,
cpaeHostPostureTokenStr CnnEouPostureTokenString,
cpaeHostUrlRedirection SnmpAdminString,
cpaeHostAuthPaeState CpaeAuthState,
cpaeHostBackendState INTEGER,
cpaeHostSessionId OCTET STRING
}
cpaeHostInfoHostIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary index assigned by the agent to identify
the host."
::= { cpaeHostInfoEntry 1 }
cpaeHostInfoMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Mac Address of the host."
::= { cpaeHostInfoEntry 2 }
cpaeHostInfoPostureToken OBJECT-TYPE
SYNTAX CnnEouPostureToken
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the posture token assigned to the host.
This object has been obsoleted and replaced by
cpaeHostPostureTokenStr."
::= { cpaeHostInfoEntry 3 }
cpaeHostInfoUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the name of the authenticated user on
the host."
::= { cpaeHostInfoEntry 4 }
cpaeHostInfoAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the type of Internet address of the host."
::= { cpaeHostInfoEntry 5 }
cpaeHostInfoAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Internet address of the host. The type
of this address is determined by the value of
cpaeHostInfoAddrType object."
::= { cpaeHostInfoEntry 6 }
cpaeHostPostureTokenStr OBJECT-TYPE
SYNTAX CnnEouPostureTokenString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the posture token assigned to the host."
::= { cpaeHostInfoEntry 7 }
cpaeHostUrlRedirection OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the URL-redirection assigned for this host
by AAA server."
::= { cpaeHostInfoEntry 8 }
cpaeHostAuthPaeState OBJECT-TYPE
SYNTAX CpaeAuthState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current value of the Authenticator PAE
state machine for the host."
REFERENCE
"802.1X-2001 9.4.1, Authenticator PAE state,
802.1X-2004 9.4.1, Authenticator PAE state"
::= { cpaeHostInfoEntry 9 }
cpaeHostBackendState OBJECT-TYPE
SYNTAX INTEGER {
request(1),
response(2),
success(3),
fail(4),
timeout(5),
idle(6),
initialize(7),
ignore(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current state of the Backend Authentication
state machine of the host."
REFERENCE
"802.1X-2001 9.4.1, Backend Authentication state,
802.1X-2004 9.4.1, Backend Authentication state."
::= { cpaeHostInfoEntry 10 }
cpaeHostSessionId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique identifier of the 802.1x session."
::= { cpaeHostInfoEntry 11 }
cpaePortEapolTestLimits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the maximum number of entries allowed in
cpaePortEapolTestTable."
::= { cpaeMIBObject 12 }
cpaePortEapolTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpaePortEapolTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table for testing EAPOL (Extensible Authentication
Protocol Over LAN) capable information of hosts
connecting to PAE ports in the device."
::= { cpaeMIBObject 13 }
cpaePortEapolTestEntry OBJECT-TYPE
SYNTAX CpaePortEapolTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing EAPOL capable information for
hosts connecting to a PAE port."
INDEX { dot1xPaePortNumber }
::= { cpaePortEapolTestTable 1 }
CpaePortEapolTestEntry ::= SEQUENCE {
cpaePortEapolTestResult INTEGER,
cpaePortEapolTestStatus RowStatus
}
cpaePortEapolTestResult OBJECT-TYPE
SYNTAX INTEGER {
inProgress(1),
notCapable(2),
capable(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the test result of whether there is
EAPOL supporting host connecting to the port.
inProgress: the test is in progress.
notCapable: there is no EAPOL supporting host
connecting to the port.
capable : there is EAPOL supporting host connecting
to the port."
::= { cpaePortEapolTestEntry 1 }
cpaePortEapolTestStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to manage the creation,
and deletion of rows in the table.
An entry can be created by setting the instance
value of this object to 'createAndGo', and deleted
by setting the instance value of this object to
'destroy'."
::= { cpaePortEapolTestEntry 2 }
-- 802.1x Critical Authentication
-- This feature allows network access for critical machines,
-- when 802.1x is not able to reach the configured RADIUS server(s).
cpaeCriticalConfig OBJECT IDENTIFIER
::= { cpaeMIBObject 14 }
cpaeCriticalEapolEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies if the device will send an EAPOL-Success
message on successful Critical Authentication for a
supplicant."
::= { cpaeCriticalConfig 1 }
cpaeCriticalRecoveryDelay OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milli-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the critical recovery delay time
for 802.1x in the system. A value of zero indicates
that Critical Authentication recovery delay for
802.1x is disabled."
::= { cpaeCriticalConfig 2 }
cpaePortIpDevTrackConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpaePortIpDevTrackConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of IP Device Tracking configuration for PAE
ports in the system."
::= { cpaeMIBObject 15 }
cpaePortIpDevTrackConfigEntry OBJECT-TYPE
SYNTAX CpaePortIpDevTrackConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of IP Device Tracking configuration on a
PAE port."
INDEX { dot1xPaePortNumber }
::= { cpaePortIpDevTrackConfigTable 1 }
CpaePortIpDevTrackConfigEntry ::= SEQUENCE {
cpaePortIpDevTrackEnabled TruthValue
}
cpaePortIpDevTrackEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies if IP Device Tracking is enabled on this port
for the corresponding 802.1x authenticated host."
::= { cpaePortIpDevTrackConfigEntry 1 }
cpaeGlobalAuthFailMaxAttempts OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A global configuration to specify the maximum number
of authentication attempts that should be made before a port
is moved into its Auth-Fail VLAN."
::= { cpaeMIBObject 16 }
cpaeGlobalSecViolationAction OBJECT-TYPE
SYNTAX INTEGER {
restrict(1),
shutdown(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A global configuration to specify the action that will be
applied to a PAE port upon reception of a security violation
event.
restrict: Packets from MAC address of the device
causing security violation will be dropped.
shutdown: The port that causes security violation
will be shutdown."
::= { cpaeMIBObject 17 }
cpaeDot1xSuppToGuestVlanAllowed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether ports associated with 802.1x supplicants are
allowed to move to Guest Vlan when they stop responding to EAPOL
inquiries."
::= { cpaeMIBObject 18 }
-- Supplicant support
cpaeSupplicantObjects OBJECT IDENTIFIER
::= { cpaeMIBObject 19 }
cpaeSuppPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpaeSuppPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects providing information and configuration
for the Supplicant PAE associated with each port. This
table provides additional objects for the dot1xSuppConfigTable."
::= { cpaeSupplicantObjects 1 }
cpaeSuppPortEntry OBJECT-TYPE
SYNTAX CpaeSuppPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing supplicant configuration information for a
particular PAE port."
INDEX { dot1xPaePortNumber }
::= { cpaeSuppPortTable 1 }
CpaeSuppPortEntry ::= SEQUENCE {
cpaeSuppPortCredentialProfileName SnmpAdminString,
cpaeSuppPortEapProfileName SnmpAdminString
}
cpaeSuppPortCredentialProfileName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the credentials profile of the Supplicant PAE.
A zero length string for this object indicates that the
Supplicant PAE does not have credential profile."
::= { cpaeSuppPortEntry 1 }
cpaeSuppPortEapProfileName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the EAP profile of the Supplicant PAE. A zero
length string for this object indicates that the
Supplicant PAE does not have EAP profile."
::= { cpaeSuppPortEntry 2 }
cpaeSuppHostInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpaeSuppHostInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of dot1x supplicants in the system."
::= { cpaeSupplicantObjects 2 }
cpaeSuppHostInfoEntry OBJECT-TYPE
SYNTAX CpaeSuppHostInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing dot1x supplicant information for a
supplicant on a particular PAE port in the system."
INDEX {
dot1xPaePortNumber,
cpaeSuppHostInfoSuppIndex
}
::= { cpaeSuppHostInfoTable 1 }
CpaeSuppHostInfoEntry ::= SEQUENCE {
cpaeSuppHostInfoSuppIndex Unsigned32,
cpaeSuppHostAuthMacAddress MacAddress,
cpaeSuppHostPaeState INTEGER,
cpaeSuppHostBackendState INTEGER,
cpaeSuppHostStatus PaeControlledPortStatus
}
cpaeSuppHostInfoSuppIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary index assigned by the agent to identify the
supplicant."
::= { cpaeSuppHostInfoEntry 1 }
cpaeSuppHostAuthMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the MAC address of the authenticator, which
authenticates the supplicant."
::= { cpaeSuppHostInfoEntry 2 }
cpaeSuppHostPaeState OBJECT-TYPE
SYNTAX INTEGER {
disconnected(1),
logoff(2),
connecting(3),
authenticating(4),
authenticated(5),
acquired(6),
held(7),
restart(8),
sForceAuth(9),
sForceUnauth(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current state of the Supplicant PAE State
machine."
REFERENCE "802.1X-2004 9.5.1, Supplicant PAE State"
::= { cpaeSuppHostInfoEntry 3 }
cpaeSuppHostBackendState OBJECT-TYPE
SYNTAX INTEGER {
initialize(1),
idle(2),
request(3),
response(4),
receive(5),
fail(6),
success(7),
timeout(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current state of the Supplicant Backend state
machine."
REFERENCE "802.1X-2004 9.5.1, Backend Supplicant state"
::= { cpaeSuppHostInfoEntry 4 }
cpaeSuppHostStatus OBJECT-TYPE
SYNTAX PaeControlledPortStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the status of the supplicant."
REFERENCE "802.1X-2004 9.5.1, SuppControlledPortStatus"
::= { cpaeSuppHostInfoEntry 5 }
-- Notifications
cpaeNoGuestVlanNotif NOTIFICATION-TYPE
OBJECTS { dot1xAuthPaeState }
STATUS current
DESCRIPTION
"A cpaeNoGuestVlanNotif is sent if a non-802.1x
supplicant is detected on a PAE port for which the
value of corresponding instance of
dot1xAuthAuthControlledPortControl is 'auto' and the
value of corresponding instance of cpaeGuestVlanNumber
is zero."
::= { cpaeMIBNotification 1 }
cpaeNoAuthFailVlanNotif NOTIFICATION-TYPE
OBJECTS { dot1xAuthPaeState }
STATUS current
DESCRIPTION
"A cpaeNoAuthFailVlanNotif is sent if a 802.1x
supplicant fails to authenticate on a PAE port for
which the value of corresponding instance of
dot1xAuthAuthControlledPortControl is 'auto' and the
value of corresponding instance of cpaePortAuthFailVlan
is zero."
::= { cpaeMIBNotification 2 }
cpaeGuestVlanNotif NOTIFICATION-TYPE
OBJECTS {
cpaeGuestVlanNumber,
dot1xAuthPaeState
}
STATUS current
DESCRIPTION
"A cpaeGuestVlanNotif is sent if value of the instance
of cpaeGuestVlanNotifEnable is set to 'true', and a PAE
port is being moved to the VLAN specified by value of
the corresponding instance of cpaeGuestVlanNumber."
::= { cpaeMIBNotification 3 }
cpaeAuthFailVlanNotif NOTIFICATION-TYPE
OBJECTS {
cpaePortAuthFailVlan,
dot1xAuthPaeState
}
STATUS current
DESCRIPTION
"A cpaeAuthFailVlanNotif is sent if value of the instance
of cpaeAuthFailVlanNotifEnable is set to 'true', and a PAE
port is being moved to the VLAN specified by value of
the corresponding instance of cpaePortAuthFailVlan."
::= { cpaeMIBNotification 4 }
-- Conformance
cpaeMIBCompliances OBJECT IDENTIFIER
::= { cpaeMIBConformance 1 }
cpaeMIBGroups OBJECT IDENTIFIER
::= { cpaeMIBConformance 2 }
cpaeCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for devices that implement
the CISCO-PAE-MIB."
MODULE -- this module
MANDATORY-GROUPS { cpaeMultipleHostGroup }
::= { cpaeMIBCompliances 1 }
cpaeCompliance2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for devices that implement
the CISCO-PAE-MIB."
MODULE -- this module
MANDATORY-GROUPS { cpaePortEntryGroup }
GROUP cpaeGuestVlanGroup
DESCRIPTION
"This group is mandatory in devices running software
which supports Guest Vlan feature."
::= { cpaeMIBCompliances 2 }
cpaeCompliance3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for devices that implement
the CISCO-PAE-MIB."
MODULE -- this module
MANDATORY-GROUPS { cpaePortEntryGroup }
GROUP cpaeGuestVlanGroup2
DESCRIPTION
"This group is mandatory in devices running software
which supports per-interface Guest Vlan feature."
GROUP cpaeShutdownTimeoutGroup
DESCRIPTION
"This group is mandatory in devices running software
which support Shutdown Timeout feature."
::= { cpaeMIBCompliances 3 }
cpaeCompliance4 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for devices that implement
the CISCO-PAE-MIB."
MODULE -- this module
MANDATORY-GROUPS { cpaePortEntryGroup }
GROUP cpaeGuestVlanGroup2
DESCRIPTION
"This group is mandatory in devices running software
which supports per-interface Guest Vlan feature."
GROUP cpaeShutdownTimeoutGroup
DESCRIPTION
"This group is mandatory in devices running software
which support Shutdown Timeout feature."
GROUP cpaeRadiusConfigGroup
DESCRIPTION
"This group is mandatory in devices running software
which support RADIUS configuration for 802.1x feature."
GROUP cpaeUserGroupGroup
DESCRIPTION
"This group is mandatory in devices running software
which support Group Manager for 802.1x feature."
::= { cpaeMIBCompliances 4 }
cpaeCompliance5 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for devices that implement
the CISCO-PAE-MIB."
MODULE -- this module
MANDATORY-GROUPS { cpaePortEntryGroup }
GROUP cpaeGuestVlanGroup3
DESCRIPTION
"This group is mandatory in devices running software
which supports per-interface Guest Vlan feature."
GROUP cpaeShutdownTimeoutGroup
DESCRIPTION
"This group is mandatory in devices running software
which support Shutdown Timeout feature."
GROUP cpaeRadiusConfigGroup
DESCRIPTION
"This group is mandatory in devices running software
which support RADIUS configuration for 802.1x feature."
GROUP cpaeUserGroupGroup
DESCRIPTION
"This group is mandatory in devices running software
which support Group Manager for 802.1x feature."
GROUP cpaePortOperVlanGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaePortAuthFailVlanGroup
DESCRIPTION
"This group is mandatory in devices running software
which support Auth-Fail Vlan configuration for
802.1x feature."
GROUP cpaeNoGuestVlanNotifEnableGrp
DESCRIPTION
"This group is mandatory in devices running software
which supports per-interface Guest Vlan feature."
GROUP cpaeNoAuthFailVlanNotifEnableGrp
DESCRIPTION
"This group is mandatory in devices running software
which supports Auth-Fail Vlan configuration for
802.1x feature."
GROUP cpaeNoGuestVlanNotifGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeNoAuthFailVlanNotifGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeMacAuthBypassGroup
DESCRIPTION
"This group is mandatory in devices running software
which support MAC Authentication Bypass feature."
GROUP cpaeWebAuthGroup
DESCRIPTION
"This group is mandatory in devices running software
which support Web Proxy Authentication feature."
GROUP cpaeAuthConfigGroup
DESCRIPTION
"This group is mandatory in devices running software
which support remote reauthentication timer."
GROUP cpaeHostInfoGroup
DESCRIPTION
"Implementation of this group is optional."
::= { cpaeMIBCompliances 5 }
cpaeCompliance6 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for devices that implement
the CISCO-PAE-MIB."
MODULE -- this module
MANDATORY-GROUPS { cpaePortEntryGroup }
GROUP cpaeGuestVlanGroup3
DESCRIPTION
"This group is mandatory in devices running software
which supports per-interface Guest Vlan feature."
GROUP cpaeShutdownTimeoutGroup
DESCRIPTION
"This group is mandatory in devices running software
which support Shutdown Timeout feature."
GROUP cpaeRadiusConfigGroup
DESCRIPTION
"This group is mandatory in devices running software
which support RADIUS configuration for 802.1x feature."
GROUP cpaeUserGroupGroup
DESCRIPTION
"This group is mandatory in devices running software
which support Group Manager for 802.1x feature."
GROUP cpaePortOperVlanGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaePortAuthFailVlanGroup
DESCRIPTION
"This group is mandatory in devices running software
which support Auth-Fail Vlan configuration for
802.1x feature."
GROUP cpaeNoGuestVlanNotifEnableGrp
DESCRIPTION
"This group is mandatory in devices running software
which supports per-interface Guest Vlan feature."
GROUP cpaeNoAuthFailVlanNotifEnableGrp
DESCRIPTION
"This group is mandatory in devices running software
which supports Auth-Fail Vlan configuration for
802.1x feature."
GROUP cpaeNoGuestVlanNotifGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeNoAuthFailVlanNotifGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeMacAuthBypassGroup
DESCRIPTION
"This group is mandatory in devices running software
which support MAC Authentication Bypass feature."
GROUP cpaeMacAuthBypassGroup2
DESCRIPTION
"This group is mandatory in devices running software
which provides additional information of
MAC Authentication Bypass feature."
GROUP cpaeWebAuthGroup
DESCRIPTION
"This group is mandatory in devices running software
which support Web Proxy Authentication feature."
GROUP cpaeWebAuthAaaFailGroup
DESCRIPTION
"This group is mandatory in devices running software
which support Inaccessible Authentication Bypass
for Web Proxy Authentication feature."
GROUP cpaeHostInfoGroup2
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaePortEapolTestGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaePortAuthFailVlanGroup2
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration for maximum authentication
attempts for Auth-Fail Vlan feature."
GROUP cpaeAuthConfigGroup
DESCRIPTION
"This group is mandatory in devices running software
which support remote reauthentication timer,
re-authentication action, maximum re-authentication
attempts and critical configuration for PAE ports."
GROUP cpaeAuthConfigGroup2
DESCRIPTION
"This group is mandatory in devices running software
which provides additional states in the PAE state
machines."
GROUP cpaeCriticalRecoveryDelayGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides recovery delay configuration for 802.1x
Critical Authentication."
GROUP cpaeMacAuthBypassCriticalGroup
DESCRIPTION
"This group is mandatory in devices running software
which support critical recovery delay configuration for
MAC Authentication Bypass."
GROUP cpaeWebAuthCriticalGroup
DESCRIPTION
"This group is mandatory in devices running software
which support critical recovery delay configuration for
Web Proxy Authentication."
OBJECT cpaePortEapolTestStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"Only 'active', 'createAndGo' and 'destroy' are
needed to be supported."
::= { cpaeMIBCompliances 6 }
cpaeCompliance7 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for devices that implement
the CISCO-PAE-MIB."
MODULE -- this module
MANDATORY-GROUPS { cpaePortEntryGroup }
GROUP cpaeGuestVlanGroup3
DESCRIPTION
"This group is mandatory in devices running software
which supports per-interface Guest Vlan feature."
GROUP cpaeShutdownTimeoutGroup
DESCRIPTION
"This group is mandatory in devices running software
which support Shutdown Timeout feature."
GROUP cpaeRadiusConfigGroup
DESCRIPTION
"This group is mandatory in devices running software
which support RADIUS configuration for 802.1x feature."
GROUP cpaeUserGroupGroup
DESCRIPTION
"This group is mandatory in devices running software
which support Group Manager for 802.1x feature."
GROUP cpaePortOperVlanGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaePortAuthFailVlanGroup
DESCRIPTION
"This group is mandatory in devices running software
which support Auth-Fail Vlan configuration for
802.1x feature."
GROUP cpaeNoGuestVlanNotifEnableGrp
DESCRIPTION
"This group is mandatory in devices running software
which supports per-interface Guest Vlan feature."
GROUP cpaeNoAuthFailVlanNotifEnableGrp
DESCRIPTION
"This group is mandatory in devices running software
which supports Auth-Fail Vlan configuration for
802.1x feature."
GROUP cpaeNoGuestVlanNotifGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeNoAuthFailVlanNotifGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeMacAuthBypassGroup
DESCRIPTION
"This group is mandatory in devices running software
which support MAC Authentication Bypass feature."
GROUP cpaeMacAuthBypassGroup2
DESCRIPTION
"This group is mandatory in devices running software
which provides additional information of
MAC Authentication Bypass feature."
GROUP cpaeMacAuthBypassGroup3
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration for authentication
method for MAC Authentication Bypass feature."
GROUP cpaeWebAuthGroup
DESCRIPTION
"This group is mandatory in devices running software
which support Web Proxy Authentication feature."
GROUP cpaeWebAuthAaaFailGroup
DESCRIPTION
"This group is mandatory in devices running software
which support Inaccessible Authentication Bypass
for Web Proxy Authentication feature."
GROUP cpaeHostInfoGroup2
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeHostInfoGroup3
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaePortEapolTestGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaePortAuthFailVlanGroup2
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration for maximum authentication
attempts for Auth-Fail Vlan feature."
GROUP cpaeAuthConfigGroup
DESCRIPTION
"This group is mandatory in devices running software
which support remote reauthentication timer,
re-authentication action, maximum re-authentication
attempts and critical configuration for PAE ports."
GROUP cpaeAuthConfigGroup2
DESCRIPTION
"This group is mandatory in devices running software
which provides additional states in the PAE state
machines."
GROUP cpaeCriticalRecoveryDelayGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides recovery delay configuration for 802.1x
Critical Authentication."
GROUP cpaeMacAuthBypassCriticalGroup
DESCRIPTION
"This group is mandatory in devices running software
which support critical recovery delay configuration for
MAC Authentication Bypass."
GROUP cpaeWebAuthCriticalGroup
DESCRIPTION
"This group is mandatory in devices running software
which support critical recovery delay configuration for
Web Proxy Authentication."
GROUP cpaeHostPostureTokenGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides information about Posture Token of
host(s) connecting to a PAE port."
OBJECT cpaePortEapolTestStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"Only 'active', 'createAndGo' and 'destroy' are
needed to be supported."
::= { cpaeMIBCompliances 7 }
cpaeCompliance8 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for devices that implement
the CISCO-PAE-MIB."
MODULE -- this module
MANDATORY-GROUPS { cpaePortEntryGroup }
GROUP cpaeGuestVlanGroup3
DESCRIPTION
"This group is mandatory in devices running software
which supports per-interface Guest Vlan feature."
GROUP cpaeShutdownTimeoutGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeRadiusConfigGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeUserGroupGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaePortOperVlanGroup
DESCRIPTION
"This group is mandatory for the devices which assign
interfaces to specific VLANs based on 802.1x authentication."
GROUP cpaePortAuthFailVlanGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeNoGuestVlanNotifEnableGrp
DESCRIPTION
"This group is mandatory in devices running software
which supports per-interface Guest Vlan feature."
GROUP cpaeNoAuthFailVlanNotifEnableGrp
DESCRIPTION
"This group is mandatory in devices running software
which supports Auth-Fail Vlan configuration for
802.1x feature."
GROUP cpaeNoGuestVlanNotifGroup
DESCRIPTION
"This group is mandatory in devices running software
which supports per-interface Guest Vlan feature."
GROUP cpaeNoAuthFailVlanNotifGroup
DESCRIPTION
"This group is mandatory in devices running software
which supports Auth-Fail Vlan configuration for
802.1x feature."
GROUP cpaeMacAuthBypassGroup2
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeMacAuthBypassGroup3
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeWebAuthGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeWebAuthAaaFailGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeHostInfoGroup2
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeHostInfoGroup3
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaePortEapolTestGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaePortAuthFailVlanGroup2
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration for maximum authentication
attempts for Auth-Fail Vlan feature."
GROUP cpaeAuthConfigGroup2
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeCriticalRecoveryDelayGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeMacAuthBypassCriticalGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeWebAuthCriticalGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeHostPostureTokenGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeMabAuditInfoGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeMabPortIpDevTrackConfGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaePortIpDevTrackConfGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeHostUrlRedirectGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeWebAuthIpDevTrackingGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeWebAuthUnAuthTimeoutGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeGlobalAuthFailVlanGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeGlobalSecViolationGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeCriticalEapolConfigGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides EAPOL configuration for 802.1x
Critical Authentication."
GROUP cpaeMacAuthBypassPortEnableGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeMacAuthBypassGroup4
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeAuthIabConfigGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeAuthConfigGroup3
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration and information related
to re-authentication of 802.1x ports in the system."
GROUP cpaeAuthConfigGroup4
DESCRIPTION
"Implementation of this group is optional."
OBJECT cpaePortEapolTestStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"Only 'active', 'createAndGo' and 'destroy' are
needed to be supported."
::= { cpaeMIBCompliances 8 }
cpaeCompliance9 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for devices that implement
the CISCO-PAE-MIB."
MODULE -- this module
MANDATORY-GROUPS { cpaePortEntryGroup }
GROUP cpaeGuestVlanGroup3
DESCRIPTION
"This group is mandatory in devices running software
which supports per-interface Guest Vlan feature."
GROUP cpaeShutdownTimeoutGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeRadiusConfigGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeUserGroupGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaePortOperVlanGroup
DESCRIPTION
"This group is mandatory for the devices which assign
interfaces to specific VLANs based on 802.1x authentication."
GROUP cpaePortAuthFailVlanGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeNoGuestVlanNotifEnableGrp
DESCRIPTION
"This group is mandatory in devices running software
which supports per-interface Guest Vlan feature."
GROUP cpaeNoAuthFailVlanNotifEnableGrp
DESCRIPTION
"This group is mandatory in devices running software
which supports Auth-Fail Vlan configuration for
802.1x feature."
GROUP cpaeNoGuestVlanNotifGroup
DESCRIPTION
"This group is mandatory in devices running software
which supports per-interface Guest Vlan feature."
GROUP cpaeNoAuthFailVlanNotifGroup
DESCRIPTION
"This group is mandatory in devices running software
which supports Auth-Fail Vlan configuration for
802.1x feature."
GROUP cpaeMacAuthBypassGroup2
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeMacAuthBypassGroup3
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeWebAuthGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeWebAuthAaaFailGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeHostInfoGroup2
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeHostInfoGroup3
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaePortEapolTestGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaePortAuthFailVlanGroup2
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration for maximum authentication
attempts for Auth-Fail Vlan feature."
GROUP cpaeAuthConfigGroup2
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeCriticalRecoveryDelayGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeMacAuthBypassCriticalGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeWebAuthCriticalGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeHostPostureTokenGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeMabAuditInfoGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeMabPortIpDevTrackConfGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaePortIpDevTrackConfGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeHostUrlRedirectGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeWebAuthIpDevTrackingGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeWebAuthUnAuthTimeoutGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeGlobalAuthFailVlanGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeGlobalSecViolationGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeCriticalEapolConfigGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides EAPOL configuration for 802.1x
Critical Authentication."
GROUP cpaeMacAuthBypassPortEnableGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeMacAuthBypassGroup4
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeAuthIabConfigGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeAuthConfigGroup3
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration and information related
to re-authentication of 802.1x ports in the system."
GROUP cpaeAuthConfigGroup4
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeHostSessionIdGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeHostAuthInfoGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaePortCapabilitiesConfigGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeDot1xSuppToGuestVlanGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeGuestVlanNotifEnableGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeGuestVlanNotifGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeAuthFailVlanNotifEnableGrp
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaeAuthFailVlanNotifGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cpaePortAuthFailVlanConfigGroup
DESCRIPTION
"This group is mandatory in devices running software which
supports Auth-Fail Vlan configuration for 802.1x feature."
GROUP cpaePortAuthFailUserInfoGroup
DESCRIPTION
"Implementation of this group is optional."
OBJECT cpaePortEapolTestStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"Only 'active', 'createAndGo' and 'destroy' are
needed to be supported."
::= { cpaeMIBCompliances 9 }
cpaeCompliance10 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices that implement
the CISCO-PAE-MIB."
MODULE -- this module
MANDATORY-GROUPS { cpaePortEntryGroup }
GROUP cpaeGuestVlanGroup3
DESCRIPTION
"This group is mandatory in devices running software
which supports per-interface Guest Vlan feature."
GROUP cpaeShutdownTimeoutGroup
DESCRIPTION
"This group is mandatory in devices running software
which support Shutdown Timeout for 802.1x."
GROUP cpaeRadiusConfigGroup
DESCRIPTION
"This group is mandatory in devices running software
which support RADIUS accounting configuration for 802.1x."
GROUP cpaeUserGroupGroup
DESCRIPTION
"This group is mandatory in devices running software
which support Group Manager for 802.1x."
GROUP cpaePortOperVlanGroup
DESCRIPTION
"This group is mandatory for the devices which assign
interfaces to specific VLANs based on 802.1x authentication."
GROUP cpaeNoGuestVlanNotifEnableGrp
DESCRIPTION
"This group is mandatory in devices running software
which supports per-interface Guest Vlan feature."
GROUP cpaeNoAuthFailVlanNotifEnableGrp
DESCRIPTION
"This group is mandatory in devices running software
which supports Auth-Fail Vlan configuration for
802.1x feature."
GROUP cpaeNoGuestVlanNotifGroup
DESCRIPTION
"This group is mandatory in devices running software
which supports per-interface Guest Vlan feature."
GROUP cpaeNoAuthFailVlanNotifGroup
DESCRIPTION
"This group is mandatory in devices running software
which supports Auth-Fail Vlan configuration for
802.1x feature."
GROUP cpaeMacAuthBypassGroup2
DESCRIPTION
"This group is mandatory in devices running software
which provides information about termination action and
session time left for Mac Authentication Bypass via
802.1x feature."
GROUP cpaeMacAuthBypassGroup3
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration of authentication method
for Mac Authentication Bypass via 802.1x feature."
GROUP cpaeWebAuthGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration for Web Proxy Authentication
via 802.1x feature."
GROUP cpaeWebAuthAaaFailGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration of Inaccessible Authentication
Bypass for Web Proxy Authentication via 802.1x feature."
GROUP cpaeHostInfoGroup2
DESCRIPTION
"This group is mandatory in devices running software
which provides MAC address information of hosts connecting
to PAE ports in the system."
GROUP cpaeHostInfoGroup3
DESCRIPTION
"This group is mandatory in devices running software
which provides user and IP address information for 802.1x
authenticated host in the system."
GROUP cpaePortEapolTestGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides EAPOL capable information of hosts connecting
to PAE ports in the system."
GROUP cpaePortAuthFailVlanGroup2
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration for maximum authentication
attempts for Auth-Fail Vlan feature."
GROUP cpaeAuthConfigGroup2
DESCRIPTION
"This group is mandatory in devices running software
which provides additional states in the PAE state machine."
GROUP cpaeCriticalRecoveryDelayGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides recovery delay configuration for 802.1x
Critical Authentication in the system."
GROUP cpaeMacAuthBypassCriticalGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides control over critical configuration for Mac
Authentication Bypass via 802.1x feature."
GROUP cpaeWebAuthCriticalGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides control over critical configuration for Web
Proxy Authentication via 802.1x feature."
GROUP cpaeHostPostureTokenGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides information about Posture Token of hosts
connecting to PAE ports."
GROUP cpaeMabAuditInfoGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides information about MAC Auth-Bypass Audit
sessions via 802.1x feature."
GROUP cpaeMabPortIpDevTrackConfGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration and information about MAC
Auth-Bypass IP Device Tracking via 802.1x feature."
GROUP cpaePortIpDevTrackConfGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration and information about
802.1x IP Device Tracking feature."
GROUP cpaeHostUrlRedirectGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides information about URL-redirection of 802.1x
authenticated hosts."
GROUP cpaeWebAuthIpDevTrackingGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration and information about Web
Proxy Authentication IP Device Tracking via 802.1x feature."
GROUP cpaeWebAuthUnAuthTimeoutGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration and information about Init State
Timeout of Web Proxy Authentication via 802.1x feature."
GROUP cpaeGlobalAuthFailVlanGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides global configuration and information about
maximum authentication attempts for Auth-Fail Vlan feature
in the system."
GROUP cpaeGlobalSecViolationGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides global configuration and information about
security violation action on PAE ports in the system."
GROUP cpaeCriticalEapolConfigGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides EAPOL configuration for 802.1x
Critical Authentication."
GROUP cpaeMacAuthBypassPortEnableGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration to enable or disable MAC
Auth-Bypass on capable ports via 802.1x feature."
GROUP cpaeMacAuthBypassGroup4
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration and information of MAC
Auth-Bypass parameters via 802.1x feature."
GROUP cpaeAuthIabConfigGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration to enable or disable IAB
feature on capable ports in the system."
GROUP cpaeAuthConfigGroup3
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration and information related
to re-authentication of 802.1x ports in the system."
GROUP cpaeAuthConfigGroup4
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration of maximum reauthentication
attempts of 802.1x ports in the system."
GROUP cpaeHostSessionIdGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides session identification information for 802.1x
hosts in the system."
GROUP cpaeHostAuthInfoGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides information about state machines and
authentication information for 802.1x authenticated hosts in
the system."
GROUP cpaePortCapabilitiesConfigGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration and information about PAE
functionalities of ports in the systems."
GROUP cpaeDot1xSuppToGuestVlanGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides configuration that allows moving ports with
802.1x supplicants to Guest Vlan."
GROUP cpaeGuestVlanNotifEnableGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides control over Guest Vlan related notification(s)."
GROUP cpaeGuestVlanNotifGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides Guest-Vlan notification."
GROUP cpaeAuthFailVlanNotifEnableGrp
DESCRIPTION
"This group is mandatory in devices running software
which provides control over Auth-Fail Vlan related
notification(s)."
GROUP cpaeAuthFailVlanNotifGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides Auth-Fail Vlan notification."
GROUP cpaePortAuthFailVlanConfigGroup
DESCRIPTION
"This group is mandatory in devices running software which
supports Auth-Fail Vlan configuration for 802.1x feature."
GROUP cpaePortAuthFailUserInfoGroup
DESCRIPTION
"This group is mandatory in devices running software
which provides the Auth-Fail user information in the system."
GROUP cpaeSuppPortProfileGroup
DESCRIPTION
"This group is mandatory in devices running software which
supports PAE supplicant credential and EAP profiles feature."
GROUP cpaeSuppHostInfoGroup
DESCRIPTION
"This group is mandatory in devices running software which
supports per-host supplicant feature."
OBJECT cpaePortMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeGuestVlanNumber
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeShutdownTimeoutEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaePortAuthFailVlan
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeAuthFailVlanMaxAttempts
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaePortCapabilitiesEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeShutdownTimeout
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeRadiusAccountingEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeNoGuestVlanNotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeNoAuthFailVlanNotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeGuestVlanNotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeAuthFailVlanNotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeMacAuthBypassReAuthTimeout
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeMacAuthBypassReAuthEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeMacAuthBypassViolation
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeMacAuthBypassShutdownTimeout
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeMacAuthBypassAuthFailTimeout
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeMacAuthBypassPortEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeMacAuthBypassPortInitialize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeMacAuthBypassPortReAuth
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeMacAuthBypassPortAuthMethod
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeMacAuthBypassAcctEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeMabCriticalRecoveryDelay
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeMabPortIpDevTrackEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeWebAuthEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeWebAuthSessionPeriod
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeWebAuthLoginPage
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeWebAuthLoginFailedPage
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeWebAuthQuietPeriod
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeWebAuthMaxRetries
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeWebAuthPortEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeWebAuthPortInitialize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeWebAuthPortAaaFailPolicy
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeWebAuthPortIpDevTrackEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeWebAuthHostInitialize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeWebAuthCriticalRecoveryDelay
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeWebAuthUnAuthStateTimeout
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeAuthReAuthPeriodSrcAdmin
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeAuthReAuthMax
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeAuthIabEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeCriticalEapolEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeCriticalRecoveryDelay
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaePortIpDevTrackEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeGlobalAuthFailMaxAttempts
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeGlobalSecViolationAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeDot1xSuppToGuestVlanAllowed
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeSuppPortCredentialProfileName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaeSuppPortEapProfileName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpaePortEapolTestStatus
SYNTAX INTEGER {
active(1)
}
WRITE-SYNTAX INTEGER {
createAndGo(4),
destroy(6)
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required.
Support for createAndWait and notInService is not required."
::= { cpaeMIBCompliances 10 }
-- Units of Conformance
cpaeMultipleHostGroup OBJECT-GROUP
OBJECTS { cpaeMultipleHost }
STATUS deprecated
DESCRIPTION
"A collection of objects that provide the multiple
host configuration information for a PAE port.
These are additional to the IEEE Std 802.1x PAE MIB."
::= { cpaeMIBGroups 1 }
cpaePortEntryGroup OBJECT-GROUP
OBJECTS { cpaePortMode }
STATUS current
DESCRIPTION
"A collection of objects that provides the port-mode
configuration for a PAE port."
::= { cpaeMIBGroups 2 }
cpaeGuestVlanGroup OBJECT-GROUP
OBJECTS { cpaeGuestVlanId }
STATUS deprecated
DESCRIPTION
"A collection of objects that provides the Guest Vlan
configuration information for the system."
::= { cpaeMIBGroups 3 }
cpaeGuestVlanGroup2 OBJECT-GROUP
OBJECTS {
cpaeGuestVlanNumber,
cpaeInGuestVlan
}
STATUS deprecated
DESCRIPTION
"A collection of objects that provides the per-interface
Guest Vlan configuration information for the system."
::= { cpaeMIBGroups 4 }
cpaeShutdownTimeoutGroup OBJECT-GROUP
OBJECTS {
cpaeShutdownTimeout,
cpaeShutdownTimeoutEnabled
}
STATUS current
DESCRIPTION
"A collection of objects that provides the dot1x
shutdown timeout configuration information for
the system."
::= { cpaeMIBGroups 5 }
cpaeRadiusConfigGroup OBJECT-GROUP
OBJECTS { cpaeRadiusAccountingEnabled }
STATUS current
DESCRIPTION
"A collection of objects that provides the RADIUS
configuration information for the system."
::= { cpaeMIBGroups 6 }
cpaeUserGroupGroup OBJECT-GROUP
OBJECTS {
cpaeUserGroupUserName,
cpaeUserGroupUserAddrType,
cpaeUserGroupUserAddr,
cpaeUserGroupUserInterface,
cpaeUserGroupUserVlan
}
STATUS current
DESCRIPTION
"A collection of objects that provides the group manager
information of authenticated users in the system."
::= { cpaeMIBGroups 7 }
cpaeGuestVlanGroup3 OBJECT-GROUP
OBJECTS { cpaeGuestVlanNumber }
STATUS current
DESCRIPTION
"A collection of objects that provides the per-interface
Guest Vlan configuration information for the system."
::= { cpaeMIBGroups 8 }
cpaePortOperVlanGroup OBJECT-GROUP
OBJECTS {
cpaePortOperVlan,
cpaePortOperVlanType
}
STATUS current
DESCRIPTION
"A collection of object(s) that provides the
information about Operational Vlan for each PAE port."
::= { cpaeMIBGroups 9 }
cpaePortAuthFailVlanGroup OBJECT-GROUP
OBJECTS {
cpaePortAuthFailVlan,
cpaeAuthFailUserName
}
STATUS deprecated
DESCRIPTION
"A collection of object(s) that provides the
Auth-Fail (Authentication Fail) Vlan configuration
and Auth-Fail user information for the system."
::= { cpaeMIBGroups 10 }
cpaeNoGuestVlanNotifEnableGrp OBJECT-GROUP
OBJECTS { cpaeNoGuestVlanNotifEnable }
STATUS current
DESCRIPTION
"A collection of object(s) that provides control over
Guest Vlan related notification(s)."
::= { cpaeMIBGroups 11 }
cpaeNoAuthFailVlanNotifEnableGrp OBJECT-GROUP
OBJECTS { cpaeNoAuthFailVlanNotifEnable }
STATUS current
DESCRIPTION
"A collection of object(s) that provides control over
Auth-Fail related notification(s)."
::= { cpaeMIBGroups 12 }
cpaeNoGuestVlanNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS { cpaeNoGuestVlanNotif }
STATUS current
DESCRIPTION
"A collection of notification(s) providing the
information for unconfigured Guest Vlan."
::= { cpaeMIBGroups 13 }
cpaeNoAuthFailVlanNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS { cpaeNoAuthFailVlanNotif }
STATUS current
DESCRIPTION
"A collection of notifications providing the
information for unconfigured Auth-Fail Vlan."
::= { cpaeMIBGroups 14 }
cpaeMacAuthBypassGroup OBJECT-GROUP
OBJECTS {
cpaeMacAuthBypassReAuthTimeout,
cpaeMacAuthBypassReAuthEnabled,
cpaeMacAuthBypassViolation,
cpaeMacAuthBypassShutdownTimeout,
cpaeMacAuthBypassAuthFailTimeout,
cpaeMacAuthBypassPortEnabled,
cpaeMacAuthBypassPortInitialize,
cpaeMacAuthBypassPortReAuth,
cpaeMacAuthBypassPortMacAddress,
cpaeMacAuthBypassPortAuthState,
cpaeMacAuthBypassAcctEnable
}
STATUS deprecated
DESCRIPTION
"A collection of object(s) that provides the
MAC Auth-Bypass configuration and information
for the system."
::= { cpaeMIBGroups 15 }
cpaeWebAuthGroup OBJECT-GROUP
OBJECTS {
cpaeWebAuthEnabled,
cpaeWebAuthSessionPeriod,
cpaeWebAuthLoginPage,
cpaeWebAuthLoginFailedPage,
cpaeWebAuthQuietPeriod,
cpaeWebAuthMaxRetries,
cpaeWebAuthPortEnabled,
cpaeWebAuthPortInitialize,
cpaeWebAuthAaaSessionPeriod,
cpaeWebAuthHostSessionTimeLeft,
cpaeWebAuthHostState,
cpaeWebAuthHostInitialize
}
STATUS current
DESCRIPTION
"A collection of object(s) that provides the
Web Proxy Authentication configuration and
information for the system."
::= { cpaeMIBGroups 16 }
cpaeAuthConfigGroup OBJECT-GROUP
OBJECTS {
cpaeAuthReAuthPeriodSrcAdmin,
cpaeAuthReAuthPeriodSrcOper,
cpaeAuthReAuthPeriodOper,
cpaeAuthTimeToNextReAuth,
cpaeAuthReAuthAction,
cpaeAuthReAuthMax,
cpaeAuthIabEnabled
}
STATUS deprecated
DESCRIPTION
"A collection of object(s) that provides additional
configuration information about an Authenticator PAE."
::= { cpaeMIBGroups 17 }
cpaeHostInfoGroup OBJECT-GROUP
OBJECTS {
cpaeHostInfoMacAddress,
cpaeHostInfoPostureToken
}
STATUS obsolete
DESCRIPTION
"A collection of object(s) that provides information
about an host connecting to a PAE port."
::= { cpaeMIBGroups 18 }
cpaeWebAuthAaaFailGroup OBJECT-GROUP
OBJECTS { cpaeWebAuthPortAaaFailPolicy }
STATUS current
DESCRIPTION
"A collection of object(s) that provides Inaccessible
Authentication Bypass configuration and information
for Web Proxy Authentication in the system."
::= { cpaeMIBGroups 19 }
cpaeMacAuthBypassGroup2 OBJECT-GROUP
OBJECTS {
cpaeMacAuthBypassPortTermAction,
cpaeMacAuthBypassSessionTimeLeft
}
STATUS current
DESCRIPTION
"A collection of object(s) that provides additional
information of MAC Auth-bypass feature in the system."
::= { cpaeMIBGroups 20 }
cpaePortEapolTestGroup OBJECT-GROUP
OBJECTS {
cpaePortEapolTestLimits,
cpaePortEapolTestResult,
cpaePortEapolTestStatus
}
STATUS current
DESCRIPTION
"A collection of object(s) that provides information
about if connecting hosts are EAPOL capable."
::= { cpaeMIBGroups 21 }
cpaeHostInfoGroup2 OBJECT-GROUP
OBJECTS { cpaeHostInfoMacAddress }
STATUS current
DESCRIPTION
"A collection of object(s) that provides information
about an host connecting to a PAE port."
::= { cpaeMIBGroups 22 }
cpaeMacAuthBypassGroup3 OBJECT-GROUP
OBJECTS { cpaeMacAuthBypassPortAuthMethod }
STATUS current
DESCRIPTION
"A collection of object(s) that provides configuration
for authentication method for MAC Auth-bypass feature
in the system."
::= { cpaeMIBGroups 23 }
cpaePortAuthFailVlanGroup2 OBJECT-GROUP
OBJECTS { cpaeAuthFailVlanMaxAttempts }
STATUS current
DESCRIPTION
"A collection of object(s) that provides configuration
for maximum authentication attempts for Auth-Fail Vlan
feature in the system."
::= { cpaeMIBGroups 24 }
cpaeAuthConfigGroup2 OBJECT-GROUP
OBJECTS { cpaeAuthPaeState }
STATUS current
DESCRIPTION
"A collection of object(s) that provides additional
states in the PAE state machine."
::= { cpaeMIBGroups 25 }
cpaeCriticalRecoveryDelayGroup OBJECT-GROUP
OBJECTS { cpaeCriticalRecoveryDelay }
STATUS current
DESCRIPTION
"A collection of object(s) that provides recovery delay
configuration for 802.1x Critical Authentication
in the system."
::= { cpaeMIBGroups 26 }
cpaeAuthConfigGroup3 OBJECT-GROUP
OBJECTS {
cpaeAuthReAuthPeriodSrcAdmin,
cpaeAuthReAuthPeriodSrcOper,
cpaeAuthReAuthPeriodOper,
cpaeAuthTimeToNextReAuth,
cpaeAuthReAuthAction
}
STATUS current
DESCRIPTION
"A collection of object(s) that provides configuration
and information related to re-authentication of 802.1x
ports in the system."
::= { cpaeMIBGroups 27 }
cpaeAuthConfigGroup4 OBJECT-GROUP
OBJECTS { cpaeAuthReAuthMax }
STATUS current
DESCRIPTION
"A collection of object(s) that provides configuration
of maximum reauthentication attempts of 802.1x
ports in the system."
::= { cpaeMIBGroups 28 }
cpaeAuthIabConfigGroup OBJECT-GROUP
OBJECTS { cpaeAuthIabEnabled }
STATUS current
DESCRIPTION
"A collection of object(s) to enable/disable IAB feature
on capable interface for the system."
::= { cpaeMIBGroups 29 }
cpaeGlobalAuthFailVlanGroup OBJECT-GROUP
OBJECTS { cpaeGlobalAuthFailMaxAttempts }
STATUS current
DESCRIPTION
"A collection of object(s) that provides global configuration
and information about maximum authentication attempts for
Auth-Fail Vlan feature in the system."
::= { cpaeMIBGroups 30 }
cpaeMacAuthBypassCriticalGroup OBJECT-GROUP
OBJECTS { cpaeMabCriticalRecoveryDelay }
STATUS current
DESCRIPTION
"A collection of object(s) that provides control over
critical configuration for Mac Authentication Bypass."
::= { cpaeMIBGroups 31 }
cpaeWebAuthCriticalGroup OBJECT-GROUP
OBJECTS { cpaeWebAuthCriticalRecoveryDelay }
STATUS current
DESCRIPTION
"A collection of object(s) that provides control over
critical configuration for Web Proxy Authentication."
::= { cpaeMIBGroups 32 }
cpaeCriticalEapolConfigGroup OBJECT-GROUP
OBJECTS { cpaeCriticalEapolEnabled }
STATUS current
DESCRIPTION
"A collection of object(s) that provides EAPOL
configuration for 802.1x Critical Authentication
in the system."
::= { cpaeMIBGroups 33 }
cpaeHostPostureTokenGroup OBJECT-GROUP
OBJECTS { cpaeHostPostureTokenStr }
STATUS current
DESCRIPTION
"A collection of object(s) that provides information
about Posture Token of an host connecting to a PAE port."
::= { cpaeMIBGroups 34 }
cpaeMabAuditInfoGroup OBJECT-GROUP
OBJECTS {
cpaeMacAuthBypassPortSessionId,
cpaeMacAuthBypassPortUrlRedirect,
cpaeMacAuthBypassPortPostureTok
}
STATUS current
DESCRIPTION
"A collection of object(s) that provides information about
MAC Auth-Bypass Audit sessions."
::= { cpaeMIBGroups 35 }
cpaeMabPortIpDevTrackConfGroup OBJECT-GROUP
OBJECTS { cpaeMabPortIpDevTrackEnabled }
STATUS current
DESCRIPTION
"A collection of object(s) that provides configuration and
information about MAC Auth-Bypass IP Device Tracking
feature."
::= { cpaeMIBGroups 36 }
cpaePortIpDevTrackConfGroup OBJECT-GROUP
OBJECTS { cpaePortIpDevTrackEnabled }
STATUS current
DESCRIPTION
"A collection of object(s) that provides configuration and
information about 802.1x IP Device Tracking feature."
::= { cpaeMIBGroups 37 }
cpaeHostUrlRedirectGroup OBJECT-GROUP
OBJECTS { cpaeHostUrlRedirection }
STATUS current
DESCRIPTION
"A collection of object(s) that provides information about
URL-redirection of 802.1x authenticated hosts."
::= { cpaeMIBGroups 38 }
cpaeWebAuthIpDevTrackingGroup OBJECT-GROUP
OBJECTS { cpaeWebAuthPortIpDevTrackEnabled }
STATUS current
DESCRIPTION
"A collection of object(s) that provides configuration and
information about Web Proxy Authentication IP Device
Tracking feature."
::= { cpaeMIBGroups 39 }
cpaeWebAuthUnAuthTimeoutGroup OBJECT-GROUP
OBJECTS { cpaeWebAuthUnAuthStateTimeout }
STATUS current
DESCRIPTION
"A collection of object(s) that provides configuration and
information about Init State Timeout of Web Proxy
Authentication."
::= { cpaeMIBGroups 40 }
cpaeHostInfoGroup3 OBJECT-GROUP
OBJECTS {
cpaeHostInfoUserName,
cpaeHostInfoAddrType,
cpaeHostInfoAddr
}
STATUS current
DESCRIPTION
"A collection of object(s) that provides user and the
address information for 802.1x authenticated host."
::= { cpaeMIBGroups 41 }
cpaeGlobalSecViolationGroup OBJECT-GROUP
OBJECTS { cpaeGlobalSecViolationAction }
STATUS current
DESCRIPTION
"A collection of object(s) that provides global configuration
and information about security violation action on PAE ports
in the system."
::= { cpaeMIBGroups 42 }
cpaeMacAuthBypassPortEnableGroup OBJECT-GROUP
OBJECTS { cpaeMacAuthBypassPortEnabled }
STATUS current
DESCRIPTION
"A collection of object(s) to enable/disable Mac Auth-Bypass
on capable interfaces for the system."
::= { cpaeMIBGroups 43 }
cpaeMacAuthBypassGroup4 OBJECT-GROUP
OBJECTS {
cpaeMacAuthBypassReAuthEnabled,
cpaeMacAuthBypassReAuthTimeout,
cpaeMacAuthBypassViolation,
cpaeMacAuthBypassShutdownTimeout,
cpaeMacAuthBypassAuthFailTimeout,
cpaeMacAuthBypassPortInitialize,
cpaeMacAuthBypassPortReAuth,
cpaeMacAuthBypassPortMacAddress,
cpaeMacAuthBypassPortAuthState,
cpaeMacAuthBypassAcctEnable
}
STATUS current
DESCRIPTION
"A collection of object(s) that provides the
MAC Auth-Bypass configuration and information
for the system."
::= { cpaeMIBGroups 44 }
cpaeHostSessionIdGroup OBJECT-GROUP
OBJECTS { cpaeHostSessionId }
STATUS current
DESCRIPTION
"A collection of object(s) that provides session
identification information for 802.1x hosts in the system."
::= { cpaeMIBGroups 45 }
cpaeHostAuthInfoGroup OBJECT-GROUP
OBJECTS {
cpaeHostAuthPaeState,
cpaeHostBackendState
}
STATUS current
DESCRIPTION
"A collection of object(s) that provides state machines and
authentication information for 802.1x authenticated hosts
in the system."
::= { cpaeMIBGroups 46 }
cpaePortCapabilitiesConfigGroup OBJECT-GROUP
OBJECTS { cpaePortCapabilitiesEnabled }
STATUS current
DESCRIPTION
"A collection of object(s) that provides configuration and
information about PAE functionalities of ports in the systems."
::= { cpaeMIBGroups 47 }
cpaeDot1xSuppToGuestVlanGroup OBJECT-GROUP
OBJECTS { cpaeDot1xSuppToGuestVlanAllowed }
STATUS current
DESCRIPTION
"A collection of object(s) that provides configuration that
allows moving ports with 802.1x supplicants to Guest Vlan."
::= { cpaeMIBGroups 48 }
cpaeGuestVlanNotifEnableGroup OBJECT-GROUP
OBJECTS { cpaeGuestVlanNotifEnable }
STATUS current
DESCRIPTION
"A collection of object(s) that provides control over
Guest Vlan related notification(s)."
::= { cpaeMIBGroups 49 }
cpaeGuestVlanNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS { cpaeGuestVlanNotif }
STATUS current
DESCRIPTION
"A collection of notifications providing information
for Guest Vlan."
::= { cpaeMIBGroups 50 }
cpaeAuthFailVlanNotifEnableGrp OBJECT-GROUP
OBJECTS { cpaeAuthFailVlanNotifEnable }
STATUS current
DESCRIPTION
"A collection of object(s) that provides control over
Auth-Fail Vlan related notification(s)."
::= { cpaeMIBGroups 51 }
cpaeAuthFailVlanNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS { cpaeAuthFailVlanNotif }
STATUS current
DESCRIPTION
"A collection of notifications providing information
for Auth-Fail Vlan."
::= { cpaeMIBGroups 52 }
cpaePortAuthFailVlanConfigGroup OBJECT-GROUP
OBJECTS { cpaePortAuthFailVlan }
STATUS current
DESCRIPTION
"A collection of object(s) that provides the Auth-Fail
(Authentication Fail) Vlan configuration for the system."
::= { cpaeMIBGroups 53 }
cpaePortAuthFailUserInfoGroup OBJECT-GROUP
OBJECTS { cpaeAuthFailUserName }
STATUS current
DESCRIPTION
"A collection of object(s) that provides the Auth-Fail user
information for the system."
::= { cpaeMIBGroups 54 }
cpaeSuppPortProfileGroup OBJECT-GROUP
OBJECTS {
cpaeSuppPortCredentialProfileName,
cpaeSuppPortEapProfileName
}
STATUS current
DESCRIPTION
"A collection of object(s) that provides Credential and
EAP profiles configuration for a Supplicant PAE."
::= { cpaeMIBGroups 55 }
cpaeSuppHostInfoGroup OBJECT-GROUP
OBJECTS {
cpaeSuppHostAuthMacAddress,
cpaeSuppHostPaeState,
cpaeSuppHostBackendState,
cpaeSuppHostStatus
}
STATUS current
DESCRIPTION
"A collection of object(s) that provides information about
supplicants in the system."
::= { cpaeMIBGroups 56 }
END
Reference in New Issue View Git Blame Copy Permalink