mirror of
https://github.com/hsnodgrass/snmp_mib_archive.git
synced 2025-04-17 16:03:04 +00:00
366 lines
14 KiB
Plaintext
366 lines
14 KiB
Plaintext
-- *****************************************************************
|
|
-- ciscoMGX8800IfMapping MIB - MGX8800 IF-Mapping MIB
|
|
--
|
|
-- October 2002, Asok Tiyyagura
|
|
-- March 2003, Jeffrey Liang
|
|
-- December 2003, Qing Yu
|
|
-- Apr 2004, Sheldon Chan
|
|
-- May 2004, Feng Luo
|
|
--
|
|
-- Copyright (c) 1999-2000, 2001, 2002, 2003, 2004 cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
|
|
CISCO-MGX8800-IF-MAPPING-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32 FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP FROM SNMPv2-CONF
|
|
InterfaceIndex FROM IF-MIB
|
|
ciscoWan FROM CISCOWAN-SMI;
|
|
|
|
ciscoMGX8800IfMappingMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200405250000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
" Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-wanatm@cisco.com"
|
|
DESCRIPTION
|
|
"This MIB module is used for getting the ifIndex values
|
|
given physical location and/or logical information.
|
|
The physical information includes the slot, back-card
|
|
and physical line, IMA group ID, MFR (Multilink Frame Relay)
|
|
bundle etc. The logical information includes the logical
|
|
interface or virtual interface number.
|
|
|
|
In this MIB back card, bay, line module are used to
|
|
refer to the back card.
|
|
"
|
|
|
|
REVISION "200405250000Z"
|
|
DESCRIPTION
|
|
"Added following enums to CmimIfType:
|
|
lapd(24).
|
|
"
|
|
|
|
REVISION "200404300000Z"
|
|
DESCRIPTION
|
|
"Added following enums to CmimIfType:
|
|
ppplink(22), pppMultilinkBundle(23),
|
|
"
|
|
REVISION "200312040000Z"
|
|
DESCRIPTION
|
|
"Added new enum mfrBundle(21) to CmimIfType.
|
|
"
|
|
REVISION "200303200000Z"
|
|
DESCRIPTION
|
|
"Fixed alignments and descriptions.
|
|
"
|
|
REVISION "200210210000Z"
|
|
DESCRIPTION
|
|
"1. Added following enums to CmimIfType:
|
|
ds1VTPath(18), ds1Ds3SonetPath(19) and atmVciEndPt(20)
|
|
2. Modified description for cmimModuleIndex, CmimIfType
|
|
and cmimIfNumber to describe the rules to form a
|
|
query to obtain ifIndex for ds1VTPath, ds1Ds3SonetPath
|
|
and atmVciEndPt.
|
|
"
|
|
REVISION "200210160000Z"
|
|
DESCRIPTION
|
|
"1. Added following enums to CmimIfType:
|
|
frameRelayPort(16), ces(17).
|
|
2. Modified description for cmimModuleIndex, CmimIfType
|
|
and cmimIfNumber to describe the rules to form a
|
|
query to obtain ifIndex for frame relay and ces
|
|
interfaces.
|
|
"
|
|
REVISION "200205210000Z"
|
|
DESCRIPTION
|
|
"1. Added following enums to CmimIfType:
|
|
sonetPath(12), ds3SonetPath(13),
|
|
atmSonetPath(14), atmDs3SonetPath(15).
|
|
2. Modified description for cmimModuleIndex, CmimIfType
|
|
and cmimIfNumber to describe the rules to form a
|
|
query to obtain ifIndex for SONET Path, ds3 path on
|
|
a SONET path and corresponding ATM Cell layers.
|
|
3. Imported Unsigned32 from SNMPv2-SMI instead of
|
|
CISCO-TC.
|
|
"
|
|
REVISION "200202170000Z"
|
|
DESCRIPTION
|
|
"Added enums srmBertLine(10) and srmBertPort(11) to CmimIfType
|
|
and modified descriptions of cmimIfNumber and CmimIfType,
|
|
explaining how to discover the interface indexes of
|
|
physical lines and logical ports of narrow-band service
|
|
modules (NBSM) that obtain BERT service through Service
|
|
Resource Module (SRM).
|
|
"
|
|
REVISION "200110160000Z"
|
|
DESCRIPTION
|
|
"Added enum sonetVT(8) and imaGrpAtmPhy(9) for CmimIfType,
|
|
and modified descriptions for cmimIfNumber and CmimIfType.
|
|
"
|
|
REVISION "200107080000Z"
|
|
DESCRIPTION
|
|
"Added following enumerations to Textual-convention CmimIfType:
|
|
adjCardApsLine(6), propAtm(7).
|
|
"
|
|
REVISION "200002120000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB Module"
|
|
|
|
::= { ciscoWan 7 }
|
|
|
|
CmimIfType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface types.
|
|
"
|
|
SYNTAX INTEGER {
|
|
physicalLine(1), -- for ifType sonet, ds3, ds1,
|
|
-- ethernet etc.
|
|
atmIma(2), -- for ifType = atmIma(107)
|
|
atm(3), -- for ifType = atm(37)
|
|
atmVirtual(4), -- for ifType = atmVirtual(149)
|
|
ds1Inds3(5), -- for DS1s in a DS3, E1s in E3
|
|
adjCardApsLine(6), -- for Adjacent card APS line
|
|
propAtm(7), -- for ifType = propAtm(197)
|
|
sonetVT(8), -- for ifType = sonetVT(51)
|
|
imaGrpAtmPhy(9), -- for ifType = atm(37) with ATM
|
|
-- IMA phy query
|
|
srmBertLine(10), -- for BERT interfaces of NBSM
|
|
-- physical lines
|
|
srmBertPort(11), -- for BERT interfaces of NBSM
|
|
-- logical ports
|
|
sonetPath(12), -- for STS-N paths and SDH AUs
|
|
ds3SonetPath(13), -- for DS3 path carried by
|
|
-- STS-N/AU Path
|
|
atmSonetPath(14), -- for ATM Cell Layer carried by
|
|
-- STS-N/AU Path
|
|
atmDs3SonetPath(15), -- for ATM Cell Layer carried by
|
|
-- DS3 on STS-N/AU Path
|
|
frameRelayPort(16), -- for ifType = frameRelayService(44),
|
|
-- frForward(158) and atmFuni(106)
|
|
ces(17), -- for ifType = ces(133)
|
|
ds1VTPath(18), -- for ds1 in VT, ifType = 18
|
|
ds1Ds3SonetPath(19), -- for ds1 in Ds3 on STS1, ifType = 18
|
|
atmVciEndPt(20), -- for ifType atmVciEndPt = 194
|
|
mfrBundle(21), -- for ifType frf16MfrBundle = 163
|
|
ppplink(22), -- for ifType ppp = 23
|
|
pppMpbundle(23), -- for ifType pppMultilinkBundle = 108
|
|
lapd(24) -- for ifType = lapd(77)
|
|
}
|
|
|
|
cmimMappingObjects OBJECT IDENTIFIER ::= { ciscoMGX8800IfMappingMIB 1 }
|
|
cmimPhysToIf OBJECT IDENTIFIER ::= { cmimMappingObjects 1 }
|
|
|
|
cmimPhysToIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CmimPhysToIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one or more rows, representing
|
|
mappings of physical or logical interfaces to ifIndex
|
|
values.
|
|
"
|
|
::= { cmimPhysToIf 1 }
|
|
|
|
cmimPhysToIfEntry OBJECT-TYPE
|
|
SYNTAX CmimPhysToIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular physical interface or
|
|
logical interface.
|
|
"
|
|
INDEX { cmimModuleIndex, cmimIfNumber, cmimIfType }
|
|
::= { cmimPhysToIfTable 1 }
|
|
|
|
CmimPhysToIfEntry ::=
|
|
SEQUENCE {
|
|
cmimModuleIndex Unsigned32,
|
|
cmimIfNumber Unsigned32,
|
|
cmimIfType CmimIfType,
|
|
cmimIfIndex InterfaceIndex
|
|
}
|
|
|
|
cmimModuleIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index value that uniquely identifies the location
|
|
of the module or a physical line.
|
|
It has the information on slot number, back card
|
|
and physical line number. Following is the mapping
|
|
used for this object.
|
|
|
|
Mapping used when cmimIfType is physicalLine(1), atm(3),
|
|
adjCardApsLine(6), imaGrpAtmPhy(9) and mfrBundle(21)
|
|
|
|
Bits 0-7 : Ignored
|
|
Bits 8-15 : Back Card Number (0 - Ignored, 1-Top Back card
|
|
2 - Bottom Back card)
|
|
Bits 16-23 : Logical slot number
|
|
Bits 24-31 : Shelf number
|
|
(1 - Currently, only value 1 is supported)
|
|
|
|
Mapping used when cmimIfType is set to ds1Inds3(5),
|
|
sonetVT(8), sonetPath(12), ds3SonetPath(13),
|
|
atmSonetPath(14), atmDs3SonetPath(15), ds1VTPath(18),
|
|
ds1Ds3SonetPath(19) and lapd(24)
|
|
|
|
Bits 0-7 : DS3/E3/Sonet/Sdh physical line number
|
|
Bits 8-15 : Back Card Number (0 - Ignored, 1-Top Back card
|
|
2 - Bottom Back card.
|
|
Bits 16-23 : Logical slot number
|
|
Bits 24-31 : Shelf number
|
|
(1 - Currently, only value 1 is supported)
|
|
|
|
Mapping used when cmimIfType is set to propAtm(7),
|
|
frameRelayPort(16), ces(17), atmVciEndPt(20), ppplink(22)
|
|
and pppMpbundle(23).
|
|
|
|
Bits 0-7 : 0 Ignored
|
|
Bits 8-15 : 0 Ignored
|
|
Bits 16-23 : Logical slot number
|
|
Bits 24-31 : Shelf number (1 - only value 1 is supported)
|
|
|
|
Mapping used when cmimIfType is set to srmBertLine(10) or
|
|
srmBertPort(11)
|
|
|
|
Bits 0-7 : 0 Ignored
|
|
Bits 8-15 : Logical slot number of NBSM
|
|
Bits 16-23 : Logical slot number of SRM
|
|
Bits 24-31 : Shelf number (1 - only value 1 is supported)
|
|
"
|
|
::= { cmimPhysToIfEntry 1 }
|
|
|
|
cmimIfNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index value uniquely identifies the interface
|
|
number (physical, logical) of the module. The
|
|
value specified depends on the value specified in
|
|
cmimIfType.
|
|
|
|
cmimIfType cmimIfNumber
|
|
---------- ------------
|
|
|
|
physicalLine(1) physical line number
|
|
atm(3) physical line number for atm phy
|
|
number
|
|
ds1Inds3(5) DS1/E1 line number in a DS3/E3
|
|
adjCardApsLine(6) adjacent card APS line number
|
|
propAtm(7) set to 1, this is the only value
|
|
supported at this time
|
|
sonetVT(8) DSxN tributary in a sonet/sdh line
|
|
imaGrpAtmPhy(9) atm ima group for atm phy number
|
|
srmBertLine(10) physical line number of NBSM
|
|
srmBertPort(11) logical port number of NBSM.
|
|
sonetPath(12) STS-1/AU-3 Path Number
|
|
atmSonetPath(14) STS-1/AU-3 Path Number
|
|
ds3SonetPath(13) Bits 0..15 : STS-1/AU-3 Path Number
|
|
Bits 16..31: 1 for STS-1/AU-3
|
|
or DS3 Number within AU-4
|
|
atmDs3SonetPath(15) Bits 0..15 : STS-1/AU-3 Path Number
|
|
Bits 16..31: 1 for STS-1/AU-3
|
|
or DS3 Number within AU-4
|
|
frameRelayPort(16) logical port number for frame
|
|
interface
|
|
ces(17) logical port number of circuit
|
|
emulation service interface
|
|
ds1InVT(18) Bits 0..7 : VT Number
|
|
Bits 8..15: VT group number
|
|
Bits 16..31: STS-1/AU-3 Path Number
|
|
ds1Ds3SonetPath(19) Bits 0..7 : ds1 Number
|
|
Bits 8..15: ds3 Number
|
|
Bits 16..31: STS Path Number
|
|
atmVciEndPt(20) Bits 0..15 : VCI
|
|
Bits 16..27: VPI
|
|
Bits 28..31: Port(ATM)
|
|
mfrBundle(21) Multilink Frame Relay bundle number
|
|
ppplink(22) ppp index of the ppp interface
|
|
pppMpbundle(23) mpbundle index of the mpbundle
|
|
interface
|
|
lapd(24) Bits 0..7 : ds0 number
|
|
Bits 8..15 : VT number or ds1 number
|
|
Bits 16..23: VT group (DS3 ignore it)
|
|
Bits 24..31: STS or DS3 path
|
|
"
|
|
::= { cmimPhysToIfEntry 2 }
|
|
|
|
cmimIfType OBJECT-TYPE
|
|
SYNTAX CmimIfType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of interface specified by cmimIfNumber."
|
|
::= { cmimPhysToIfEntry 3 }
|
|
|
|
cmimIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the instance of the ifIndex object,
|
|
defined in MIB-II, for the interface corresponding
|
|
to the INDEXes specified in the table.
|
|
|
|
Note that the values returned for cmimIfType=srmBertLine(10)
|
|
and cmimIfType=srmBertPort(11) will not have any entries
|
|
in the IF-TABLE.
|
|
"
|
|
::= { cmimPhysToIfEntry 4 }
|
|
|
|
-- conformance information
|
|
|
|
cmimPhysToIfMIBConformance
|
|
OBJECT IDENTIFIER ::= { ciscoMGX8800IfMappingMIB 3 }
|
|
|
|
cmimPhysToIfMIBCompliances
|
|
OBJECT IDENTIFIER ::= { cmimPhysToIfMIBConformance 1 }
|
|
|
|
cmimPhysToIfMIBGroups
|
|
OBJECT IDENTIFIER ::= { cmimPhysToIfMIBConformance 2 }
|
|
|
|
cmimPhysToIfMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for cmimPhystoIfTable.
|
|
"
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { cmimPhysToIfMIBGroup }
|
|
::= { cmimPhysToIfMIBCompliances 1 }
|
|
|
|
-- units of conformance
|
|
|
|
cmimPhysToIfMIBGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cmimIfIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group has to be implemented on all MGX8800
|
|
series products.
|
|
"
|
|
::= { cmimPhysToIfMIBGroups 1 }
|
|
|
|
END
|
|
|
|
|
|
|