MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-LWAPP-TSM-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

832 lines
33 KiB
Plaintext
Raw Blame History

-- *******************************************************************
-- CISCO-LWAPP-TSM-MIB.my
-- December 2005, Bharat Biswal, Devesh Pujari, Prasanna Viswakumar
--
-- Copyright (c) 2005, 2006 by Cisco Systems, Inc.
-- All rights reserved.
-- *******************************************************************
--
CISCO-LWAPP-TSM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
MacAddress,
TimeInterval,
TimeStamp,
TruthValue
FROM SNMPv2-TC
ciscoMgmt
FROM CISCO-SMI
cLApSysMacAddress,
cLApDot11IfSlotId
FROM CISCO-LWAPP-AP-MIB
CLTsmDot11CurrentPackets
FROM CISCO-LWAPP-TC-MIB;
--********************************************************************
--* MODULE IDENTITY
--********************************************************************
ciscoLwappTsmMIB MODULE-IDENTITY
LAST-UPDATED "200604170000Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
" Cisco Systems,
Customer Service
Postal: 170 West Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
Email: cs-wnbu-snmp@cisco.com"
DESCRIPTION
"This MIB is intended to be implemented on all those
devices operating as Central controllers, that
terminate the Light Weight Access Point Protocol
tunnel from Cisco Light-weight LWAPP Access Points.
Network management stations learn the audio/video
traffic quality observed on WLANs through this MIB.
The relationship between CC and the LWAPP APs
can be depicted as follows:
+......+ +......+ +......+
+ + + + + +
+ CC + + CC + + CC +
+ + + + + +
+......+ +......+ +......+
.. . .
.. . .
. . . .
. . . .
. . . .
. . . .
+......+ +......+ +......+ +......+
+ + + + + + + +
+ AP + + AP + + AP + + AP +
+ + + + + + + +
+......+ +......+ +......+ +......+
. . .
. . . .
. . . .
. . . .
. . . .
+......+ +......+ +......+ +......+
+ + + + + + + +
+ MN + + MN + + MN + + MN +
+ + + + + + + +
+......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
This MIB provides the information about the per-client
/per-AP packet latency, packet jitter, packet loss and
roaming time in the network which does affect quality
of audio/video traffic. These parameters are called
Traffic Stream Metrics. When TSM collection is enabled
on all 802.11a/802.11b interfaces, the metrics are
collected by controller from AP in every 90 seconds
window.
Information provided by this MIB can be used by the
NMS applications to present measurements of audio and
video traffic quality.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends it to the controller to which
it is logically connected.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity is also referred to as 'controller'.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point.
Traffic Stream Metrics (TSM)
These are parameters like the per-client / per-AP
packet latency, packet jitter, packet loss and roaming
time in the network, which does affect quality of
audio/video traffic. These statistics are collected
to study and characterize the pattern of data
traffic and perform appropriate management tasks to
regulate the same for the smooth functioning of the
network.
REFERENCE
[1] Wireless LAN Medium Access Control ( MAC ) and
Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol "
REVISION "200604170000Z"
DESCRIPTION
"Initial version of this MIB module. "
::= { ciscoMgmt 525 }
ciscoLwappTsmMIBNotifs OBJECT IDENTIFIER ::= { ciscoLwappTsmMIB 0 }
ciscoLwappTsmMIBObjects OBJECT IDENTIFIER ::= { ciscoLwappTsmMIB 1 }
ciscoLwappTsmMIBConform OBJECT IDENTIFIER ::= { ciscoLwappTsmMIB 2 }
--**********************************************************************
--* ciscoLwappTsmDot11Config encapsulates all configuration settings
--* related to Traffic Stream Metrics applicable to the 802.11
--* interfaces of the associated APs.
--**********************************************************************
ciscoLwappTsmDot11Config OBJECT IDENTIFIER
::= { ciscoLwappTsmMIBObjects 1 }
--**********************************************************************
--* ciscoLwappTsmDot11Stats encapsulates all the TSM statistics
--* collected on the associated clients, the respective dot11 interfaces
--* of the APs etc.
--**********************************************************************
ciscoLwappTsmDot11Stats OBJECT IDENTIFIER
::= { ciscoLwappTsmMIBObjects 2 }
--**********************************************************************
--* TSM configuration for 802.11 interfaces
--**********************************************************************
cLTsmDot11aConfig OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is set to 'true', the associated
APs send the controller, every 90 seconds,
statistical data on traffic observed on their 802.11a
interfaces.
When this object is set to 'false', the APs stop
sending statistical data on the 802.11a interfaces
to the controller. "
DEFVAL { false }
::= { ciscoLwappTsmDot11Config 1 }
cLTsmDot11bgConfig OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is set to 'true', the associated
APs send the controller, every 90 seconds,
statistical data on traffic observed on their 802.11b
interfaces.
When this object is set to 'false', the APs stop
sending statistical data on the 802.11b interfaces
to the controller. "
DEFVAL { false }
::= { ciscoLwappTsmDot11Config 2 }
cLTsmDot11MaxClientsPerDot11Intf OBJECT-TYPE
SYNTAX Unsigned32 (1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of clients per dot11 interface
for which TSM statistics are collected. "
DEFVAL { 50 }
::= { ciscoLwappTsmDot11Config 3 }
cLTsmDot11MaxTsmStatsEntries OBJECT-TYPE
SYNTAX Unsigned32 (1..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of entries in cLTsmDot11UplinkTable
and cLTsmDot11DnlinkTable. "
DEFVAL { 7 }
::= { ciscoLwappTsmDot11Config 4 }
--**********************************************************************
--* cLTsmDot11ClientTable lists those clients for which TSM statistics
--* are being collected
--**********************************************************************
cLTsmDot11ClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLTsmDot11ClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists those clients for which TSM statistics
are collected by the controller from the respective
APs associated with the controller.
A row is added to this table when an AP sends TSM
statistics corresponding to a wireless client
associated to it through one of its dot11 interfaces
identified by cLApSysMacAddress and cLApDot11IfSlotId.
The maximum number of entries per radio interface is
given by cLTsmDot11MaxClientsPerDot11Intf. The
oldest entry is deleted when the number of entries
is to exceed the limit indicated by
cLTsmDot11MaxClientsPerDot11Intf. "
::= { ciscoLwappTsmDot11Stats 1 }
cLTsmDot11ClientEntry OBJECT-TYPE
SYNTAX CLTsmDot11ClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a conceptual row in
cLTsmDot11ClientTable and uniquely identified by
cLApSysMacAddress, cLApDot11IfSlotId and
cLTsmDot11ClientIndex. "
INDEX {
cLApSysMacAddress,
cLApDot11IfSlotId,
cLTsmDot11ClientIndex
}
::= { cLTsmDot11ClientTable 1 }
CLTsmDot11ClientEntry ::=
SEQUENCE {
cLTsmDot11ClientIndex Unsigned32,
cLTsmDot11ClientMacAddress MacAddress
}
cLTsmDot11ClientIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely identifies one client associated
to the AP through the dot11 interface identified by
cLApSysMacAddress and cLApDot11IfSlotId. "
::= { cLTsmDot11ClientEntry 1 }
cLTsmDot11ClientMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the MAC address of the
wireless client for which TSM statistics are
collected. "
::= { cLTsmDot11ClientEntry 2 }
--**********************************************************************
--* cLTsmDot11UplinkTable represents per-client per-ap-interface
--* per-interval uplink TSM statistics for 802.11 interfaces.
--**********************************************************************
cLTsmDot11UplinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLTsmDot11UplinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the statistics received by the
controller from the associated APs, on the uplink
traffic ( traffic from the 802.11 wireless client to
the AP ) observed on the dot11 interfaces of the
respective APs.
For example, suppose a client with address
12:3f:73:99:de:5b connects to the 802.11 radio
interface, 13:13:43:de:bb:ff of an AP at 18:30:00 hours.
Assuming that cLTsmDot11aConfig (or cLTsmDot11bConfig)
is set to 'true' for the respective type of interface,
every 90 seconds, AP sends the controller statistical
data for the client 12:3f:73:99:de:5b associated at the
interface 13:13:43:de:bb:ff.
So, after 3 minutes, i.e., 180 seconds, controller would
have received statistics for the particular client and
AP combination twice leading to two rows in this table
as follows.
1> Client: 12:3f:73:99:de:5b
Interface:13:13:43:de:bb:ff Time: 18:33:00
2> Client: 12:3f:73:99:de:5b
Interface:13:13:43:de:bb:ff Time: 18:31:30
Now assume that, at 18:33:00, the client moves and
associates with another AP associated to the same
controller, at the AP's 802.11 interface
14:14:43:de:dd:ee.
After 3 minutes, i.e., 180 seconds (say), controller
would have again received statistics from the AP, for
the particular client and new AP combination twice
leading to two new rows in this table.
At this point, this table will have entries with
following references :
1> Client: 12:3f:73:99:de:5b
Interface:14:14:43:de:dd:ee Time: 18:36:00
2> Client: 12:3f:73:99:de:5b
Interface:14:14:43:de:dd:ee Time: 18:34:30
3> Client: 12:3f:73:99:de:5b
Interface:13:13:43:de:bb:ff Time: 18:33:00
4> Client: 12:3f:73:99:de:5b
Interface:13:13:43:de:bb:ff Time: 18:31:30
The maximum number of entries in this table is
indicated by cLTsmDot11MaxTsmStatsEntries. When
the specified limit of entries is reached the oldest
entries will be removed to make room for new entries.
However, the controller may remove the entries if it
encounters memory shortage. "
::= { ciscoLwappTsmDot11Stats 2 }
cLTsmDot11UplinkEntry OBJECT-TYPE
SYNTAX CLTsmDot11UplinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a conceptual row in this table
and corresponds to the uplink TSM statistics received
from an AP, in a 90 second window
(cLTsmDot11UplinkTimeStamp), for a mobile-station
/client (cLClientMacAddress) associated with the AP at
its 802.11 interface. "
INDEX {
cLTsmDot11ClientMacAddress,
cLTsmDot11UplinkApMacAddress,
cLTsmDot11UplinkApIfSlotId,
cLTsmDot11UplinkTimeStamp
}
::= { cLTsmDot11UplinkTable 1 }
CLTsmDot11UplinkEntry::=
SEQUENCE {
cLTsmDot11UplinkApMacAddress MacAddress,
cLTsmDot11UplinkApIfSlotId Unsigned32,
cLTsmDot11UplinkTimeStamp TimeStamp,
cLTsmDot11UplinkAvgPktQDelay TimeInterval,
cLTsmDot11UplinkLt10Packets CLTsmDot11CurrentPackets,
cLTsmDot11UplinkPktGt10Lt20Packets CLTsmDot11CurrentPackets,
cLTsmDot11UplinkPktGt20Lt40Packets CLTsmDot11CurrentPackets,
cLTsmDot11UplinkPktGt40Packets CLTsmDot11CurrentPackets,
cLTsmDot11UplinkLostPackets CLTsmDot11CurrentPackets,
cLTsmDot11UplinkTotalPackets CLTsmDot11CurrentPackets,
cLTsmDot11UplinkRoamingPackets CLTsmDot11CurrentPackets,
cLTsmDot11UplinkRoamingDelay TimeInterval
}
cLTsmDot11UplinkApMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the radio MAC address of the AP
with which this client was associated when these
statistics were observed. "
::= { cLTsmDot11UplinkEntry 1 }
cLTsmDot11UplinkApIfSlotId OBJECT-TYPE
SYNTAX Unsigned32(0..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents a slot number and uniquely
identifies the dot11 interface of the AP along with
cLTsmDot11UplinkApMacAddress with which the
client indicated by cLTsmDot11ClientMacAddress
was associated when these statistics were observed. "
::= { cLTsmDot11UplinkEntry 2 }
cLTsmDot11UplinkTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the value of sysUpTime at which
these statistics were received from the AP. This
represents number of seconds elapsed since 00:00:00 on
January 1, 1970, Coordinated Universal Time (UTC). So
a value of '1131362704' means 'Mon Nov 7 16:55:04
2005'. "
::= { cLTsmDot11UplinkEntry 3 }
cLTsmDot11UplinkAvgPktQDelay OBJECT-TYPE
SYNTAX TimeInterval
UNITS "hundredths-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average packet queue delay in the upstream
direction. "
::= { cLTsmDot11UplinkEntry 4 }
cLTsmDot11UplinkLt10Packets OBJECT-TYPE
SYNTAX CLTsmDot11CurrentPackets
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets transmitted by the client and
received by the AP that experienced a delay of less
than 10 ms. "
::= { cLTsmDot11UplinkEntry 5 }
cLTsmDot11UplinkPktGt10Lt20Packets OBJECT-TYPE
SYNTAX CLTsmDot11CurrentPackets
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets transmitted by the client and
received by the AP that experienced a delay greater
than or equal to 10 ms and less than 20 ms. "
::= { cLTsmDot11UplinkEntry 6 }
cLTsmDot11UplinkPktGt20Lt40Packets OBJECT-TYPE
SYNTAX CLTsmDot11CurrentPackets
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets transmitted by the client and
received by the AP that experienced a delay greater
than or equal to 20 ms and less than 40 ms. "
::= { cLTsmDot11UplinkEntry 7 }
cLTsmDot11UplinkPktGt40Packets OBJECT-TYPE
SYNTAX CLTsmDot11CurrentPackets
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets transmitted by the client and
received by the AP that experienced a delay greater
than 40 ms. "
::= { cLTsmDot11UplinkEntry 8 }
cLTsmDot11UplinkLostPackets OBJECT-TYPE
SYNTAX CLTsmDot11CurrentPackets
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of lost upstream
packets in the specified interval. "
::= { cLTsmDot11UplinkEntry 9 }
cLTsmDot11UplinkTotalPackets OBJECT-TYPE
SYNTAX CLTsmDot11CurrentPackets
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of upstream packets received in the
specified interval. "
::= { cLTsmDot11UplinkEntry 10 }
cLTsmDot11UplinkRoamingPackets OBJECT-TYPE
SYNTAX CLTsmDot11CurrentPackets
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets exchanged for roaming
negotiations in the specified interval. "
::= { cLTsmDot11UplinkEntry 11 }
cLTsmDot11UplinkRoamingDelay OBJECT-TYPE
SYNTAX TimeInterval
UNITS "hundredths-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average roaming delay observed in the
specified interval. "
::= { cLTsmDot11UplinkEntry 12 }
--**********************************************************************
--* cLTsmDot11DnlinkTable represents per-client per-ap-interface
--* per-interval Dnlink TSM statistics for 802.11 interfaces.
--**********************************************************************
cLTsmDot11DnlinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLTsmDot11DnlinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the statistics received by the
controller from the associated APs, on the downlink
traffic ( traffic from the AP to the 802.11 wireless
client ) observed on the dot11 interfaces of the
respective APs.
For example, suppose a client with address
12:3f:73:99:de:5b connects to the 802.11 radio
interface, 13:13:43:de:bb:ff of an AP at 18:30:00 hours.
Assuming that cLTsmDot11aConfig (or cLTsmDot11bConfig)
is set to 'true' for the respective type of interface,
every 90 seconds, the AP sends the controller
statistical data about the 12:3f:73:99:de:5b associated
at the interface 13:13:43:de:bb:ff.
So, after 3 minutes, i.e., 180 seconds, controller would
have received statistics from the AP for the particular
client and AP combination twice leading to two rows in
this table as follows.
1> Client: 12:3f:73:99:de:5b
Interface:13:13:43:de:bb:ff Time: 18:33:00
2> Client: 12:3f:73:99:de:5b
Interface:13:13:43:de:bb:ff Time: 18:31:30
Now assume that, at 18:33:00, the client moves and
associates with another AP associated to the same
controller, at the AP's 802.11 interface
14:14:43:de:dd:ee.
After 3 minutes, i.e., 180 seconds (say), controller
would have again collected statistics for the particular
client and new AP combination twice leading to two new
rows in this table.
At this point, this table will have entries as
follows.
1> Client: 12:3f:73:99:de:5b
Interface:14:14:43:de:dd:ee Time: 18:36:00
2> Client: 12:3f:73:99:de:5b
Interface:14:14:43:de:dd:ee Time: 18:34:30
3> Client: 12:3f:73:99:de:5b
Interface:13:13:43:de:bb:ff Time: 18:33:00
4> Client: 12:3f:73:99:de:5b
Interface:13:13:43:de:bb:ff Time: 18:31:30
The maximum number of entries in this table is
indicated by cLTsmDot11MaxTsmStatsEntries. When
the specified limit of entries is reached the oldest
entries will be removed to make room for new entries.
However, the controller may remove the entries if it
encounters memory shortage. "
::= { ciscoLwappTsmDot11Stats 3 }
cLTsmDot11DnlinkEntry OBJECT-TYPE
SYNTAX CLTsmDot11DnlinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a conceptual row in this table
and corresponds to the downlink TSM statistics received
by the controller from an AP in a 90 second
window (cLTsmDot11DnlinkTimeStamp), for a
mobile-station/client associated with the AP at its
802.11 interface. "
INDEX {
cLTsmDot11ClientMacAddress,
cLTsmDot11DnlinkApMacAddress,
cLTsmDot11DnlinkApIfSlotId,
cLTsmDot11DnlinkTimeStamp
}
::= { cLTsmDot11DnlinkTable 1 }
CLTsmDot11DnlinkEntry::=
SEQUENCE {
cLTsmDot11DnlinkApMacAddress MacAddress,
cLTsmDot11DnlinkApIfSlotId Unsigned32,
cLTsmDot11DnlinkTimeStamp TimeStamp,
cLTsmDot11DnlinkAvgPktQDelay TimeInterval,
cLTsmDot11DnlinkLt10Packets CLTsmDot11CurrentPackets,
cLTsmDot11DnlinkPktGt10Lt20Packets CLTsmDot11CurrentPackets,
cLTsmDot11DnlinkPktGt20Lt40Packets CLTsmDot11CurrentPackets,
cLTsmDot11DnlinkPktGt40Packets CLTsmDot11CurrentPackets,
cLTsmDot11DnlinkLostPackets CLTsmDot11CurrentPackets,
cLTsmDot11DnlinkTotalPackets CLTsmDot11CurrentPackets
}
cLTsmDot11DnlinkApMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the radio MAC address of the AP
with which this client was associated when these
statistics were observed. "
::= { cLTsmDot11DnlinkEntry 1 }
cLTsmDot11DnlinkApIfSlotId OBJECT-TYPE
SYNTAX Unsigned32(0..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents a slot number and uniquely
identifies the dot11 interface of the AP along with
cLTsmDot11DnlinkApMacAddress with which the
client indicated by cLTsmDot11ClientMacAddress
was associated when these statistics were observed. "
::= { cLTsmDot11DnlinkEntry 2 }
cLTsmDot11DnlinkTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the value of sysUpTime at which
these statistics were received from the AP. This
represents number of seconds elapsed since 00:00:00 on
January 1, 1970, Coordinated Universal Time (UTC). So
a value of '1131362704' means 'Mon Nov 7 16:55:04
2005'. "
::= { cLTsmDot11DnlinkEntry 3 }
cLTsmDot11DnlinkAvgPktQDelay OBJECT-TYPE
SYNTAX TimeInterval
UNITS "hundredths-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average packet queue delay in the downstream
direction. "
::= { cLTsmDot11DnlinkEntry 4 }
cLTsmDot11DnlinkLt10Packets OBJECT-TYPE
SYNTAX CLTsmDot11CurrentPackets
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets transmitted by the AP and
received by the client that experienced a delay of
less than 10 ms. "
::= { cLTsmDot11DnlinkEntry 5 }
cLTsmDot11DnlinkPktGt10Lt20Packets OBJECT-TYPE
SYNTAX CLTsmDot11CurrentPackets
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets transmitted by the AP and
received by the client that experienced a delay greater
than or equal to 10 ms and less than 20 ms. "
::= { cLTsmDot11DnlinkEntry 6 }
cLTsmDot11DnlinkPktGt20Lt40Packets OBJECT-TYPE
SYNTAX CLTsmDot11CurrentPackets
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets transmitted by the AP and
received by the client that experienced a delay greater
than or equal to 20 ms and less than 40 ms. "
::= { cLTsmDot11DnlinkEntry 7 }
cLTsmDot11DnlinkPktGt40Packets OBJECT-TYPE
SYNTAX CLTsmDot11CurrentPackets
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets transmitted by the AP and
received by the client that experienced a delay greater
than 40 ms. "
::= { cLTsmDot11DnlinkEntry 8 }
cLTsmDot11DnlinkLostPackets OBJECT-TYPE
SYNTAX CLTsmDot11CurrentPackets
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of lost downstream
packets in the specified interval. "
::= { cLTsmDot11DnlinkEntry 9 }
cLTsmDot11DnlinkTotalPackets OBJECT-TYPE
SYNTAX CLTsmDot11CurrentPackets
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of downstream packets received in the
specified interval. "
::= { cLTsmDot11DnlinkEntry 10 }
--**********************************************************************
--* Compliance statements
--**********************************************************************
ciscoLwappTsmMIBCompliances OBJECT IDENTIFIER
::= { ciscoLwappTsmMIBConform 1 }
ciscoLwappTsmMIBGroups OBJECT IDENTIFIER
::= { ciscoLwappTsmMIBConform 2 }
ciscoLwappTsmMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the SNMP entities that
implement the ciscoLwappTsmMIB module."
MODULE MANDATORY-GROUPS {
ciscoLwappTsmDot11ConfigGroup,
ciscoLwappTsmDot11StatsGroup
}
::= { ciscoLwappTsmMIBCompliances 1 }
--********************************************************************
--* Units of conformance
--********************************************************************
ciscoLwappTsmDot11ConfigGroup OBJECT-GROUP
OBJECTS {
cLTsmDot11aConfig,
cLTsmDot11bgConfig,
cLTsmDot11MaxClientsPerDot11Intf,
cLTsmDot11MaxTsmStatsEntries
}
STATUS current
DESCRIPTION
"This collection of objects represent the status of
traffic metrics collection on 802.11 networks. "
::= { ciscoLwappTsmMIBGroups 1 }
ciscoLwappTsmDot11StatsGroup OBJECT-GROUP
OBJECTS {
cLTsmDot11ClientMacAddress,
cLTsmDot11UplinkAvgPktQDelay,
cLTsmDot11UplinkLt10Packets,
cLTsmDot11UplinkPktGt10Lt20Packets,
cLTsmDot11UplinkPktGt20Lt40Packets,
cLTsmDot11UplinkPktGt40Packets,
cLTsmDot11UplinkLostPackets,
cLTsmDot11UplinkTotalPackets,
cLTsmDot11UplinkRoamingPackets,
cLTsmDot11UplinkRoamingDelay,
cLTsmDot11DnlinkAvgPktQDelay,
cLTsmDot11DnlinkLt10Packets,
cLTsmDot11DnlinkPktGt10Lt20Packets,
cLTsmDot11DnlinkPktGt20Lt40Packets,
cLTsmDot11DnlinkPktGt40Packets,
cLTsmDot11DnlinkLostPackets,
cLTsmDot11DnlinkTotalPackets
}
STATUS current
DESCRIPTION
"This collection of objects represent the TSM
statistics collected by the controller from the APs
on the traffic observed on the 802.11 interfaces of
the APs. "
::= { ciscoLwappTsmMIBGroups 2 }
END
Reference in New Issue View Git Blame Copy Permalink