MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-LWAPP-MESH-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1188 lines
44 KiB
Plaintext
Raw Blame History

-- *******************************************************************
-- CISCO-LWAPP-MESH-MIB.my
-- February,2007 Devesh Pujari
--
-- Copyright (c) 2006, 2007 by Cisco Systems, Inc.
-- All rights reserved.
-- *******************************************************************
CISCO-LWAPP-MESH-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
Integer32,
Gauge32,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TruthValue,
TimeStamp,
MacAddress,
TimeInterval
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
cLApSysMacAddress,
cLApName
FROM CISCO-LWAPP-AP-MIB
CLDot11Channel
FROM CISCO-LWAPP-TC-MIB
ciscoMgmt
FROM CISCO-SMI;
-- ********************************************************************
-- * MODULE IDENTITY
-- ********************************************************************
ciscoLwappMeshMIB MODULE-IDENTITY
LAST-UPDATED "200703090000Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
"Cisco Systems,
Customer Service
Postal: 170 West Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
Email: cs-wnbu-snmp@cisco.com"
DESCRIPTION
"This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
(LWAPP) tunnel from Light-weight Access Points.
This MIB represents information used in Wireless Mesh
Network. MAP APs associates directly with RAP APs or
with another MAP AP. Each association of AP (MAP-MAP
or RAP-MAP) with another AP forms parent-child
relationship.
The deployment of the controller
(referred to as CC in the diagram), mesh nodes
(RAP and MAP) LWAPP APs, client(MS) and NMS appear
as follows.
+.......+ +.......+
+ + + +
+ NMS + + NMS +
+ + + +
+.......+ +.......+
. .
. . . .
. . . .
. . . .
+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ RAP + + RAP + + RAP + + RAP + + RAP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MAP + + MS + + MAP + + MAP + + MAP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . .. .
. . . .. .
. . . .. .
. . . . .
+......+ +......+ +......+ +......+. +......+
+ + + + + + + + + +
+ MAP + + MAP + + MAP + + MAP + + MS +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the
configuration, that includes the WLAN parameters to
the LWAPP APs.
The APs encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends them to the controller to which
it is logically connected.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity is also referred to as 'controller'.
Mobile Station ( MS )
A roaming 802.11 wireless device in a wireless
network associated with an access point. Mobile Station
and client are used interchangeably.
Network Management System ( NMS )
The station from which the administrator manages the
wired and wireless networks.
Mesh Node
A mesh node is defined as a physical or logical entity
in the mesh network participating in forming the mesh
backhaul. RAP and MAP are two types of mesh nodes
supported in mesh network.
Root AP (RAP)
The AP forming the bridge between a wired and a mesh
network with an Ethernet interface to the wired
network and a 802.11 radio interface to the mesh
network
Mesh AP (MAP).
The AP extending wireless coverage similar to a
repeater in a mesh network and consists of a 802.11
uplink and a 802.11 downlink. On a single-radio
backhaul, both uplink and downlink exist on the same
radio and are logical links only. On a multi-radio
backhaul, they may exist on different radios.
Mesh Network
Network starting with the wireless backhaul downlink
of the RAP and all the entities below except any
attached network to the Ethernet link of MAPs. A mesh
network below a single RAP is also referred to as a
'Mesh Sector'.A mesh network consists of mesh nodes.
A single mesh network is always augmented to a single
wired network.
Mesh Link
A logical 802.11 link between two mesh nodes. A single
link is point-to-point. All point-to-multipoint links
are considered as multiple mesh links. Often referred
to as mesh backhaul link.
Mesh Backhaul
A mesh backhaul consists of mesh nodes and mesh links
terminating at a RAP. This necessarily creates a one-
to-one relationship between a 'mesh network', 'mesh
sector' and a 'mesh backhaul' where these terms can be
used interchangeably.
SNR
Signal to Noise ratio on the 802.11 radio.
Bridged network
The bridged network is defined as the network(s)
attached to the Ethernet port of any MAP. There can be
multiple such networks attached to a single mesh
network.
Mesh Node Roaming
A mesh node may change its parent mesh node naturally
when the RF/network condition changes. Child Mesh node
will re-associate and re-authenticate to new parent
mesh node. Mesh Security supports two types of mesh
node roaming.
Intra-controller - LWAPP session is not lost.
Inter-controller - LWAPP session is lost.
REFERENCE
[1] Wireless LAN Medium Access Control ( MAC ) and
Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol"
REVISION "200703090000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 616 }
ciscoLwappMeshMIBNotifs OBJECT IDENTIFIER
::= { ciscoLwappMeshMIB 0 }
ciscoLwappMeshMIBObjects OBJECT IDENTIFIER
::= { ciscoLwappMeshMIB 1 }
ciscoLwappMeshMIBConform OBJECT IDENTIFIER
::= { ciscoLwappMeshMIB 2 }
ciscoLwappMeshConfig OBJECT IDENTIFIER
::= { ciscoLwappMeshMIBObjects 1 }
ciscoLwappMeshGlobalConfig OBJECT IDENTIFIER
::= { ciscoLwappMeshMIBObjects 2 }
ciscoLwappMeshNeighborsStatus OBJECT IDENTIFIER
::= { ciscoLwappMeshMIBObjects 3 }
ciscoLwappMeshNotifControlConfig OBJECT IDENTIFIER
::= { ciscoLwappMeshMIBObjects 4 }
ciscoLwappMeshMIBNotifObjects OBJECT IDENTIFIER
::= { ciscoLwappMeshMIBObjects 5 }
-- ********************************************************************
-- * Mesh Node configuration
-- ********************************************************************
clMeshNodeTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClMeshNodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents information about the 802.11
LWAPP Access Points that have joined the controller
as part of a mesh network."
::= { ciscoLwappMeshConfig 1 }
clMeshNodeEntry OBJECT-TYPE
SYNTAX ClMeshNodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a conceptual row in this table.
An entry is created when MAP joins the controller.
The entry is removed when the mesh node lose their
association with the controller due to loss of
communication with controller or when a mesh node
is reset."
INDEX { cLApSysMacAddress }
::= { clMeshNodeTable 1 }
ClMeshNodeEntry ::= SEQUENCE {
clMeshNodeRole INTEGER ,
clMeshNodeGroupName SnmpAdminString,
clMeshNodeBackhaul INTEGER ,
clMeshNodeBackhaulDataRate Unsigned32,
clMeshNodeEthernetBridge TruthValue,
clMeshNodeEthernetLinkStatus INTEGER ,
clMeshNodePublicSafetyBackhaul TruthValue,
clMeshNodeParentMacAddress MacAddress,
clMeshNodeHeaterStatus INTEGER ,
clMeshNodeInternalTemp Integer32,
clMeshNodeType INTEGER ,
clMeshNodeHops Gauge32
}
clMeshNodeRole OBJECT-TYPE
SYNTAX INTEGER {
map(1),
rap(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the role of mesh AP which has
joined the controller. See glossary section above
for detail about MAP and RAP."
::= { clMeshNodeEntry 1 }
clMeshNodeGroupName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..10))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the group name of the mesh
sector. MAP AP will join the mesh sector which has the
same group name configured on RAP AP."
::= { clMeshNodeEntry 2 }
clMeshNodeBackhaul OBJECT-TYPE
SYNTAX INTEGER {
dot11a(1),
dot11b(2),
dot11g(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents 802.11 interface type of the
backhaul link. See Mesh Link in glossary section for
more detail on backhaul link.
dot11a - 802.11a radio is used as backhaul link.
dot11b - 802.11b radio is used as backhaul link.
dot11g - 802.11g radio is used as backhaul link."
::= { clMeshNodeEntry 3 }
clMeshNodeBackhaulDataRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Kbps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the rate at which packets are sent
on the backhaul link."
::= { clMeshNodeEntry 4 }
clMeshNodeEthernetBridge OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value of 'true' indicates ethernet bridging is enable
on this mesh node. A value of 'false indicates ethernet
bridging is not enable on this mesh node. Ethernet bridging
can be enabled on RAP or MAP."
::= { clMeshNodeEntry 5 }
clMeshNodeEthernetLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents if the link is up or down on
the ethernet port of the RAP or MAP.
up - ethernet link is up.
down - ethernet link is down."
::= { clMeshNodeEntry 6 }
clMeshNodePublicSafetyBackhaul OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"4.9Ghz considered to be public safety band and is
limited to some service providers. A value of true
indicates that 4.9 Ghz can be used on backhaul link
by selecting channel on the 802.11a backhaul radio."
::= { clMeshNodeEntry 7 }
clMeshNodeParentMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the MAC address of a parent
mesh node. In case of RAP this object will
return 0000000000000."
::= { clMeshNodeEntry 8 }
clMeshNodeHeaterStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
UNITS "Percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the heater status of the
mesh node.
on - heater is in operation
off - heater is not operation."
::= { clMeshNodeEntry 9 }
clMeshNodeInternalTemp OBJECT-TYPE
SYNTAX Integer32
UNITS "degree Celsius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the internal temperature
of mesh node in celsius."
::= { clMeshNodeEntry 10 }
clMeshNodeType OBJECT-TYPE
SYNTAX INTEGER {
indoor(1),
outdoor(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the type of mesh node.
indoor - Mesh node which is manufactured to be used
inside the building.
outdoor - Mesh node which can be used outside building
in open environment."
::= { clMeshNodeEntry 11 }
clMeshNodeHops OBJECT-TYPE
SYNTAX Gauge32
UNITS "hops"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of hops a MAP mesh node
is from RAP. When the clMeshNodeRole is set to 'RAP' this
object will return a value of zero."
::= { clMeshNodeEntry 12 }
-- ********************************************************************
-- * Mesh Network global configuration
-- ********************************************************************
clMeshNodeRange OBJECT-TYPE
SYNTAX Unsigned32 (150..132000 )
UNITS "feet"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the optimal distance in feet
between RAP and MAP for backhaul link without
degrading SNR value."
DEFVAL { 12000 }
::= { ciscoLwappMeshGlobalConfig 1 }
clMeshBackhaulClientAccess OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents if client access is to be
enable on backhaul link. If AP has two radios,802.11a
and 802.11bg, then radio which is used as backhaul link
does not have client access. A value of 'true' indicates
client access is present on backhaul link. If AP has only
one radio then same radio is used for backhaul and client
access."
DEFVAL { false }
::= { ciscoLwappMeshGlobalConfig 2 }
clMeshMacFilterList OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is 'true' then any mesh node joining
controller will be authenticated against this list.
If this object is 'false' then mesh node can join
controller even if mesh node MAC address is not
in MAC filter list."
DEFVAL { true }
::= { ciscoLwappMeshGlobalConfig 3 }
clMeshMeshNodeAuthFailureThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..30 )
UNITS "failures"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the authorization failure
threshold value. When the number of failures exceeds
this value then 'ciscoLwappMeshAuthFailure'
notification is raised."
DEFVAL { 5 }
::= { ciscoLwappMeshGlobalConfig 4 }
clMeshMeshChildAssociationFailuresThreshold OBJECT-TYPE
SYNTAX Unsigned32 (10..30 )
UNITS "failures"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the number of failed association
to controller occurred through a parent mesh node.
When this values exceeds then
'ciscoLwappMeshChildExcludedParent' notification is
raised."
DEFVAL { 10 }
::= { ciscoLwappMeshGlobalConfig 5 }
clMeshMeshChildExcludedParentInterval OBJECT-TYPE
SYNTAX TimeInterval (18000..96000 )
UNITS "hundredths-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the time interval during which
a child mesh node will exclude a parent mesh node.
During this interval child will not try to associate
the controller through the parent mesh node."
DEFVAL { 48000 }
::= { ciscoLwappMeshGlobalConfig 6 }
clMeshSNRThresholdAbate OBJECT-TYPE
SYNTAX Unsigned32 (3..50 )
UNITS "db"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the abate threshold value of
SNR. This threshold value is use to determine if the
SNR value seen by the child mesh node has reached
acceptable level and is use to trigger the
'ciscoLwappMeshAbateSNR' notification."
DEFVAL { 16 }
::= { ciscoLwappMeshGlobalConfig 7 }
clMeshSNRThresholdOnset OBJECT-TYPE
SYNTAX Unsigned32 (3..50 )
UNITS "db"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the onset threshold value of
SNR. This threshold value is use to determine if the
SNR value seen by the child mesh node has reached
below unacceptable level and is use to trigger the
'ciscoLwappMeshOnsetSNR' notification."
DEFVAL { 12 }
::= { ciscoLwappMeshGlobalConfig 8 }
clMeshSNRCheckTimeInterval OBJECT-TYPE
SYNTAX TimeInterval (18000..96000 )
UNITS "hundredths-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the time interval after which
SNR value is checked by child mesh node."
DEFVAL { 18000 }
::= { ciscoLwappMeshGlobalConfig 9 }
clMeshExcessiveParentChangeThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..20 )
UNITS "occcurences"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the threshold for the number
of times a child mesh node changes its parent. If number
of parent change exceeds this value with in the time
interval defined by object
'clMeshExcessiveParentChangeInterval' then
the 'ciscoLwappMeshExcessiveParentChange' notification
is raised."
DEFVAL { 5 }
::= { ciscoLwappMeshGlobalConfig 10 }
clMeshExcessiveParentChangeInterval OBJECT-TYPE
SYNTAX TimeInterval (180000..360000 )
UNITS "hundredths-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the time interval during which
number of times a child mesh node changes its parent
change is counted.
If number of parent change exceeds the value defined by
the object 'clMeshExcessiveParentChangeThreshold' with in
this time interval then the
'ciscoLwappMeshExcessiveParentChange' notification
is raised."
DEFVAL { 360000 }
::= { ciscoLwappMeshGlobalConfig 11 }
clMeshBackgroundScan OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value of 'true' indicates the MAP mesh node
scans its neighbors on different channel other than
only its current channel on backhaul link. This scanning
helps MAP mesh node to quickly determine its new parent
on different channels."
DEFVAL { true }
::= { ciscoLwappMeshGlobalConfig 12 }
clMeshAuthenticationMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
eap(2),
psk(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents authentication mode of RAP and
MAP mesh nodes in controller.
none - no authentication is done.
psk - pre shared key. Keys provided during manufacturing
will be used for authentication of mesh node.
eap - extensible authentication protocol is used to
authenticate mesh node. A value of 'eap' indicates,
authentication can happen by local-auth in controller
or by RADIUS server configured in controller."
DEFVAL { psk }
::= { ciscoLwappMeshGlobalConfig 13 }
-- ********************************************************************
-- * NEIGHBOR STATUS
-- ********************************************************************
clMeshNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClMeshNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents information about neighbors
of any mesh node. Neighbor AP can be on same or
different mesh sector. Any mesh node is neighbor of a
mesh node, if it can detect 802.11 signals on any
channels. Child or parent mesh node also considers as
neighbors."
::= { ciscoLwappMeshNeighborsStatus 1 }
clMeshNeighborEntry OBJECT-TYPE
SYNTAX ClMeshNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An (conceptual) entry in this table is created when
mesh node detects neighbor mesh nodes.
Entries are removed when the mesh node does not detect
AP as neighbor."
INDEX {
cLApSysMacAddress,
clMeshNeighborMacAddress
}
::= { clMeshNeighborTable 1 }
ClMeshNeighborEntry ::= SEQUENCE {
clMeshNeighborMacAddress MacAddress,
clMeshNeighborType BITS,
clMeshNeighborLinkSnr Integer32,
clMeshNeighborChannel CLDot11Channel,
clMeshNeighborUpdate TimeStamp
}
clMeshNeighborMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents MAC address of neighbor
mesh node."
::= { clMeshNeighborEntry 1 }
clMeshNeighborType OBJECT-TYPE
SYNTAX BITS {
parent(0),
neighbor(1),
excluded(2),
child(3),
beacon(4),
default(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents type of neighbor mesh node.
parent - Neighbor mesh node is a parent mesh node
of this mesh node.
neighbor - Its a neighbor mesh node. It can be on
same or different mesh-sector.
excluded - Neighbor mesh node is excluded by this
mesh node.
child - Neighbor mesh node is child of this mesh node.
beacon - Neighbor mesh node found by passive scanning.
Default - Neighbor mesh node connected using a mismatched
bridge group name"
::= { clMeshNeighborEntry 2 }
clMeshNeighborLinkSnr OBJECT-TYPE
SYNTAX Integer32
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the SNR value seen by this mesh
node from neighbor mesh node."
::= { clMeshNeighborEntry 3 }
clMeshNeighborChannel OBJECT-TYPE
SYNTAX CLDot11Channel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the channel on which neighbor
mesh node is operating."
::= { clMeshNeighborEntry 4 }
clMeshNeighborUpdate OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents when the neighbor table was last
updated. This value is represented as a instance of
sysUp time."
::= { clMeshNeighborEntry 5 }
-- ********************************************************************
-- * Notification control flags
-- ********************************************************************
clMeshAuthFailureNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the generation of
'ciscoLwappMeshAuthFailure' notification.
A value of 'true' indicates notification will
be generated.
A value of 'false' indicates notification will
be not be generated."
DEFVAL { true }
::= { ciscoLwappMeshNotifControlConfig 1 }
clMeshChildExcludedParentNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the generation of
'ciscoLwappMeshChildExcludedParent' notification.
A value of 'true' indicates notification will
be generated.
A value of 'false' indicates notification will
be not be generated."
DEFVAL { true }
::= { ciscoLwappMeshNotifControlConfig 2 }
clMeshParentChangeNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the generation of
'ciscoLwappMeshParentChange' notification.
A value of 'true' indicates notification will
be generated.
A value of 'false' indicates notification will
be not be generated."
DEFVAL { true }
::= { ciscoLwappMeshNotifControlConfig 3 }
clMeshChildMovedNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the generation of
'ciscoLwappMeshChildMoved' notification.
A value of 'true' indicates notification will
be generated.
A value of 'false' indicates notification will
be not be generated."
DEFVAL { true }
::= { ciscoLwappMeshNotifControlConfig 4 }
clMeshExcessiveParentChangeNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the generation of
'ciscoLwappMeshExcessiveParentChange' notification.
A value of 'true' indicates notification will
be generated.
A value of 'false' indicates notification will
be not be generated."
DEFVAL { true }
::= { ciscoLwappMeshNotifControlConfig 5 }
clMeshPoorSNRNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the generation of
'ciscoLwappMeshOnsetSNR' and
'ciscoLwappMeshAbateSNR' notifications.
A value of 'true' indicates notification will
be generated.
A value of 'false' indicates notification will
be not be generated."
DEFVAL { true }
::= { ciscoLwappMeshNotifControlConfig 6 }
clMeshConsoleLoginNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the generation of
'ciscoLwappMeshConsoleLogin' notification.
A value of 'true' indicates notification will
be generated.
A value of 'false' indicates notification will
be not be generated."
DEFVAL { true }
::= { ciscoLwappMeshNotifControlConfig 7 }
-- ********************************************************************
-- * NOTIFICATION objects
-- ********************************************************************
clMeshNodeMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the MAC address
of a LWAPP AP."
::= { ciscoLwappMeshMIBNotifObjects 1 }
clMeshAuthFailureReason OBJECT-TYPE
SYNTAX INTEGER {
notInMacFilterList(1),
securityFailure(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the failure reason when
a mesh node failed to authenticate through a
controller to an Authentication Server.
notInMacFilterList - MAC address of a mesh node
is not configured in MAC filter list.
securityFailure - Authentication server sent
rejection for the mesh node."
::= { ciscoLwappMeshMIBNotifObjects 2 }
clMeshPreviousParentMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the MAC address
of previous parent Mesh Node."
::= { ciscoLwappMeshMIBNotifObjects 3 }
clMeshConsoleLoginStatus OBJECT-TYPE
SYNTAX INTEGER {
success(1),
failure(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the status of console login
at MAP mesh node."
::= { ciscoLwappMeshMIBNotifObjects 4 }
-- ********************************************************************
-- * NOTIFICATION TYPE objects
-- ********************************************************************
ciscoLwappMeshAuthFailure NOTIFICATION-TYPE
OBJECTS {
clMeshNodeMacAddress,
clMeshAuthFailureReason
}
STATUS current
DESCRIPTION
"A mesh node can fail to authorize if the MAC address
of mesh node is not in the MAC filter list or security
failure by authentication server. Reason is specified by
'clMeshAuthFailureReason'. This notification is sent by
the agent when number of failures exceeds threshold
defined by object 'clMeshMeshNodeAuthFailureThreshold'.
Object 'clMeshAuthFailureNotifEnabled' controls the
generation of this notification."
::= { ciscoLwappMeshMIBNotifs 1 }
ciscoLwappMeshChildExcludedParent NOTIFICATION-TYPE
OBJECTS {
clMeshNodeParentMacAddress,
clMeshPreviousParentMacAddress,
cLApName
}
STATUS current
DESCRIPTION
"This notification will be sent by agent when child
mesh node exceeds threshold limit of number of
discovery response timeouts defined by object
'clMeshMeshChildAssociationFailuresThreshold'. The
child mesh node will not try to associate excluded
parent mesh node for the interval defined by object
'clMeshMeshChildExcludedParentInterval'.
The child mesh node will remember the excluded parent
MAC address and when it joins the network it will
inform the controller.
'cLApName' specifies child mesh node name. Child MAC
address is sent as part of index. Object
'clMeshChildExcludedParentNotifEnabled' controls the
generation of this notification."
::= { ciscoLwappMeshMIBNotifs 2 }
ciscoLwappMeshParentChange NOTIFICATION-TYPE
OBJECTS {
clMeshNodeParentMacAddress,
clMeshPreviousParentMacAddress,
cLApName
}
STATUS current
DESCRIPTION
"This notification is sent by the agent when a child
mesh node changes its parent. Child mesh node will
remember its previous parent and when it joins the
network it will inform controller about change
of its parent. 'cLApName' specifies child mesh node
name. Child mesh node MAC address is sent as part of
index. Object 'clMeshParentChangeNotifEnabled' controls
the generation of this notification."
::= { ciscoLwappMeshMIBNotifs 3 }
ciscoLwappMeshChildMoved NOTIFICATION-TYPE
OBJECTS {
clMeshNeighborType,
cLApName
}
STATUS current
DESCRIPTION
"This notification is sent by the agent when a parent
mesh node loses connection with its child mesh node.
'cLApName' specifies parent mesh node name. Parent and
child MAC address are sent as part of index. Object
'clMeshChildMovedNotifEnabled' controls
the generation of this notification."
::= { ciscoLwappMeshMIBNotifs 4 }
ciscoLwappMeshExcessiveParentChange NOTIFICATION-TYPE
OBJECTS {
clMeshNeighborType,
cLApName
}
STATUS current
DESCRIPTION
"This notification is sent by the agent when child
mesh node changes its parent frequently. Each
mesh node keeps count of number of parent changes
in fixed time. If it exceeds the threshold defined
by 'clMeshExcessiveParentChangeThreshold' then child
mesh node informs the controller. 'cLApName' specifies
child mesh node name. Child and Parent MAC address are
sent as part of index. Object
'clMeshExcessiveParentChangeNotifEnabled' controls
the generation of this notification."
::= { ciscoLwappMeshMIBNotifs 5 }
ciscoLwappMeshOnsetSNR NOTIFICATION-TYPE
OBJECTS {
clMeshNeighborLinkSnr,
cLApName
}
STATUS current
DESCRIPTION
"This notification is sent by the agent when child
mesh node detects lower SNR on backhaul link then
defined by object 'clMeshSNRThresholdOnset'. SNR
value is checked after interval defined by object
'clMeshSNRCheckTimeInterval'.
'ciscoLwappMeshAbateSNR' notification will be sent
to clear this notification. 'cLApName' specifies
child mesh node name. Child and parent MAC address
are sent as part of index. Object
'clMeshPoorSNRNotifEnabled' controls the generation
of this notification."
::= { ciscoLwappMeshMIBNotifs 6 }
ciscoLwappMeshAbateSNR NOTIFICATION-TYPE
OBJECTS {
clMeshNeighborLinkSnr,
cLApName
}
STATUS current
DESCRIPTION
"This notification is sent by the agent to clear
'ciscoLwappMeshOnsetSNR' notification when child mesh
node detects SNR on backhaul link is higher then
the object defined by 'clMeshSNRThresholdAbate'. SNR
value is checked after interval defined by object
'clMeshSNRCheckTimeInterval'.
'cLApName' specifies child mesh node name.
Child and parent MAC address are sent as part of index.
Object 'clMeshPoorSNRNotifEnabled' controls the
generation of this notification."
::= { ciscoLwappMeshMIBNotifs 7 }
ciscoLwappMeshConsoleLogin NOTIFICATION-TYPE
OBJECTS {
clMeshNodeMacAddress,
clMeshConsoleLoginStatus,
cLApName
}
STATUS current
DESCRIPTION
"This notification is sent by the agent when login on
MAP console is successful or failure after three
attempts. 'cLApName' specifies mesh node name.
Object 'clMeshPoorSNRNotifEnabled' controls the
generation of this notification."
::= { ciscoLwappMeshMIBNotifs 8 }
-- ********************************************************************
-- * Compliance statements
-- ********************************************************************
ciscoLwappMeshMIBCompliances OBJECT IDENTIFIER
::= { ciscoLwappMeshMIBConform 1 }
ciscoLwappMeshMIBGroups OBJECT IDENTIFIER
::= { ciscoLwappMeshMIBConform 2 }
ciscoLwappMeshMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the SNMP entities that
implement the ciscoLwappMeshMIB module."
MODULE -- this module
MANDATORY-GROUPS {
ciscoLwappMeshConfigGroup,
ciscoLwappMeshNeighborStatusGroup,
ciscoLwappMeshNotifControlGroup,
ciscoLwappMeshNotifObjsGroup,
ciscoLwappMeshNotifsGroup
}
::= { ciscoLwappMeshMIBCompliances 1 }
-- ********************************************************************
-- * Units of conformance
-- ********************************************************************
ciscoLwappMeshConfigGroup OBJECT-GROUP
OBJECTS {
clMeshNodeRole,
clMeshNodeGroupName,
clMeshNodeBackhaul,
clMeshNodeBackhaulDataRate,
clMeshNodeEthernetBridge,
clMeshNodeEthernetLinkStatus,
clMeshNodePublicSafetyBackhaul,
clMeshNodeParentMacAddress,
clMeshNodeHeaterStatus,
clMeshNodeInternalTemp,
clMeshNodeType,
clMeshNodeHops,
clMeshNodeRange,
clMeshBackhaulClientAccess,
clMeshMacFilterList,
clMeshMeshNodeAuthFailureThreshold,
clMeshMeshChildAssociationFailuresThreshold,
clMeshMeshChildExcludedParentInterval,
clMeshSNRThresholdAbate,
clMeshSNRThresholdOnset,
clMeshSNRCheckTimeInterval,
clMeshExcessiveParentChangeThreshold,
clMeshExcessiveParentChangeInterval,
clMeshBackgroundScan,
clMeshAuthenticationMode
}
STATUS current
DESCRIPTION
"This collection of objects represent the
global and mesh node specific configuration
and monitor parameters."
::= { ciscoLwappMeshMIBGroups 1 }
ciscoLwappMeshNeighborStatusGroup OBJECT-GROUP
OBJECTS {
clMeshNeighborType,
clMeshNeighborLinkSnr,
clMeshNeighborChannel,
clMeshNeighborUpdate
}
STATUS current
DESCRIPTION
"This collection of objects represent the
neighbor status of any mesh node."
::= { ciscoLwappMeshMIBGroups 2 }
ciscoLwappMeshNotifControlGroup OBJECT-GROUP
OBJECTS {
clMeshAuthFailureNotifEnabled,
clMeshChildExcludedParentNotifEnabled,
clMeshParentChangeNotifEnabled,
clMeshChildMovedNotifEnabled,
clMeshExcessiveParentChangeNotifEnabled,
clMeshPoorSNRNotifEnabled,
clMeshConsoleLoginNotifEnabled
}
STATUS current
DESCRIPTION
"This collection of objects represent the flags
to control the generation of notification."
::= { ciscoLwappMeshMIBGroups 3 }
ciscoLwappMeshNotifObjsGroup OBJECT-GROUP
OBJECTS {
clMeshNodeMacAddress,
clMeshAuthFailureReason,
clMeshPreviousParentMacAddress,
clMeshConsoleLoginStatus
}
STATUS current
DESCRIPTION
"This collection of objects represent the information
carried by the mesh network related notifications sent
by the agent to a network management station."
::= { ciscoLwappMeshMIBGroups 4 }
ciscoLwappMeshNotifsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ciscoLwappMeshAuthFailure,
ciscoLwappMeshChildExcludedParent,
ciscoLwappMeshParentChange,
ciscoLwappMeshChildMoved,
ciscoLwappMeshExcessiveParentChange,
ciscoLwappMeshOnsetSNR,
ciscoLwappMeshAbateSNR,
ciscoLwappMeshConsoleLogin
}
STATUS current
DESCRIPTION
"This collection of objects represent the mesh network
related notifications sent by the agent to a network
management station."
::= { ciscoLwappMeshMIBGroups 5 }
END
Reference in New Issue View Git Blame Copy Permalink