MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-ISCSI-GW-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

2683 lines
102 KiB
Plaintext
Raw Blame History

-- CISCO-ISCSI-GW-MIB.my: iSCSI-FC Gateway MIB
--
-- October 2002, Vinay Gaonkar
--
-- Copyright (c) 2002, 2003, 2004, 2005 by cisco Systems, Inc.
-- All rights reserved.
--
-- *********************************************************************
CISCO-ISCSI-GW-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32, Counter64 FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
RowStatus,
TEXTUAL-CONVENTION,
TruthValue FROM SNMPv2-TC
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
InterfaceIndex,ifIndex FROM IF-MIB
ciscoMgmt FROM CISCO-SMI
ListIndexOrZero, ListIndex, CiscoPort FROM CISCO-TC
FcNameId, FcNameIdOrZero, VsanIndex FROM CISCO-ST-TC
ScsiName,ScsiLUNOrZero,
ciscoScsiLuEntry FROM CISCO-SCSI-MIB
cIscsiInstIndex,
cIscsiNodeAttributesEntry,
cIscsiInstanceAttributesEntry,
cIscsiSessionAttributesEntry FROM CISCO-ISCSI-MIB
FcList FROM CISCO-ZS-MIB;
ciscoIscsiGwMIB MODULE-IDENTITY
LAST-UPDATED "200504290000Z"
ORGANIZATION "Cisco Systems Inc. "
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553 -NETS
E-mail: cs-san@cisco.com"
DESCRIPTION
"MIB module for monitoring and configuring iSCSI
gateway functions. An iSCSI gateway represents FC
(Fibre Channel) targets/initiators as iSCSI
targets/initiators respectively and vice versa. It
means that an iSCSI target/initiator is presented to
the FC network as a virtual FC target/initiator which
can be accessed by the real FC initiators or can access
real FC targets, respectively.
It is up to the gateway implementation how to represent
the targets/initiators in each of the domains. For
example, a gateway implementation may choose to
represent multiple FC targets either as one iSCSI target
or multiple iSCSI targets (one to one). Same applies to
initiators also."
REVISION "200504290000Z"
DESCRIPTION
"Added new table ciscsiConnectionStatsTable.
Added new group cigConnectionStatsGroup.
Added new objects to IscsiIfEntry -
iscsiIfNumNormalConnections
iscsiIfNumDiscovConnections
iscsiIfTcpCWMEnable
iscsiIfTcpCWMBurstSize
iscsiIfTcpMaxJitter
Added new objects to Iscsi2FcNodeEntry -
iscsi2FcTargetUserName
iscsi2FcTargetPassword
Added new objects -
iscsiTargetUserName and
iscsiTargetPassword to ciScsiConfig, global
Scsi configuration."
REVISION "200411160000Z"
DESCRIPTION
"Added new objects iscsiIfTcpRndTrpTimeEst.
Added new group cigIscsiIfGroupRev4.
Added new object iscsiIfTcpLocalTcpPort.
Deprecated iscsiIfTcpLocalPort.
Added a new compliance ciscoiScsiGwMIBCompliance4."
REVISION "200312080000Z"
DESCRIPTION
"Added new objects iscsiIfIntrIdentificationMode,
iscsiIntrIdentificationMode and
iscsiInitiatorIdleTimeout.
Added a new compliance ciscoiScsiGwMIBCompliance3."
REVISION "200311140000Z"
DESCRIPTION
"Added new objects iscsiAuthMethod,iscsi2FcNodeAuthUser,
iscsiIfForwardingMode, and iscsiIfIntrProxyMode.
Added new compliance ciscoiScsiGwMIBCompliance1.
Added new table iscsiGigEIfTable and new comformance
group cigIscsiGigEIfGroup.
Added new objects fc2IscsiNodeTrespassMode and
fc2IscsiNodeRevertToPrimaryPort to fc2IscsiNodeTable."
REVISION "200308180000Z"
DESCRIPTION
"Added a new table iscsiSessionAttributesExtTable.
Added iscsiIfTable.
Added scsiLuExtRemoteSecLun to scsiLyExtTable.
Added new object iscsi2FcNodeFcAddrAssignment to
iscsi2FcNodeTable. Changed MAX-ACCESS of
iscsi2FcNodeDiscovered to read-create. Added a
MIN-ACCESS to to this object to be backward
compatible.
Added new conformance groups cigLuConfigurationGroupRev1
and cigConfigurationGroupRev1. Also added a new
compliance ciscoiScsiGwMIBCompliance1."
REVISION "200305220000Z"
DESCRIPTION
"Fixed the MIB compile errors during MIB release."
REVISION "200304100000Z"
DESCRIPTION
"Changed the syntax of CIscsiTargetDomains to BITS from
INTEGER.
Added a new table iscsiImprtExprtTgtsConfTable instead of
the two scalar objects iscsiImportTargets and
iscsiExportTargets.
Added two new objects iscsi2FcNodeDiscovered and
fc2IscsiNodeDiscovered to iscsi2FcNodeTable and
fc2IscsiNodeTable respectively.
Added new object fc2IscsiNodeAllIntrAccessAllowed.
Changed the range of iscsi2FcPortNumFCAddr to 0-64 from
0-255."
REVISION "200302110000Z"
DESCRIPTION
"Added an enumeration 'none' to the CIscsiTargetDomains TC.
Changed the DESCRIPTION of iscsiImportTargets and
iscsiExportTargets to reflect this change."
REVISION "200210050000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 317 }
ciscoiScsiGwMIBNotifications
OBJECT IDENTIFIER ::= { ciscoIscsiGwMIB 0 }
ciscoiScsiGwMIBObjects
OBJECT IDENTIFIER ::= { ciscoIscsiGwMIB 1 }
ciscoiScsiGwMIBConformance
OBJECT IDENTIFIER ::= { ciscoIscsiGwMIB 2 }
ciScsiConfig OBJECT IDENTIFIER ::=
{ ciscoiScsiGwMIBObjects 1 }
ciScsiStatistics OBJECT IDENTIFIER ::=
{ ciscoiScsiGwMIBObjects 2 }
-- Textual Conventions
CIscsiTargetDomains ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value which identifies zero or more target domains.
One bit is defined for each defined domain, and a domain
is identified if its bit is set."
SYNTAX BITS {
fibreChannel (0)
}
CIscsiNodeRoles ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Role of the iSCSI node.
A node can operate as in one or both of two roles:
a target role and/or an initiator role.
An initiator starts a iSCSI session with a target to
to do any iSCSI transaction."
SYNTAX BITS {
targetTypeNode(0),
initiatorTypeNode(1)
}
IscsiName ::= TEXTUAL-CONVENTION
DISPLAY-HINT "223a"
STATUS current
DESCRIPTION
"This data type is a local refinement of the SnmpAdminString
used to define an iSCSI Name."
REFERENCE
"iSCSI Protocol Specification, Section 3.2.6, iSCSI Names."
SYNTAX OCTET STRING (SIZE(16..223))
IscsiAuthMethod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The authentication method."
SYNTAX BITS {
none (0),
chap (1)
}
CIscsiIntrIdentificationMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The initiator identification mode. An initiator is
identified either by its iSCSI name (name) or by
its IP address (ipaddress)."
SYNTAX INTEGER {
name (1),
ipaddress (2)
}
-- the iSCSI Configuration group
iscsiImprtExprtTgtsConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IscsiImprtExprtTgtsConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the configuration of automatic
importing and exporting of targets into and from iSCSI
domain. If a targets is discovered in other domains, it
is automatically imported if it is configured for
automatic importing. Similarly, if an iSCSI target is
discovered, it is automatically exported to other domains
if it is configured to do so."
::= { ciScsiConfig 1 }
iscsiImprtExprtTgtsConfEntry OBJECT-TYPE
SYNTAX IscsiImprtExprtTgtsConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information on configuration of
importing/exporting of the targets into/from iSCSI
domain."
AUGMENTS {cIscsiInstanceAttributesEntry}
::= { iscsiImprtExprtTgtsConfTable 1 }
IscsiImprtExprtTgtsConfEntry ::=
SEQUENCE {
iscsiImprtExprtTgtsConfImport CIscsiTargetDomains,
iscsiImprtExprtTgtsConfExport CIscsiTargetDomains
}
iscsiImprtExprtTgtsConfImport OBJECT-TYPE
SYNTAX CIscsiTargetDomains
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies zero or more target
domains. If a target domain is identified, then all the
targets in that domain are automatically imported into
iSCSI domain. Note that a target is not imported if it is
already in the iSCSI domain.
If value of this object is '00'H, then no targets are
automatically imported."
DEFVAL { {} }
::= { iscsiImprtExprtTgtsConfEntry 1 }
iscsiImprtExprtTgtsConfExport OBJECT-TYPE
SYNTAX CIscsiTargetDomains
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies zero or more target
domains. If a target domain is identified, then all the
targets in the iSCSI domain are automatically exported
to that domain.
Note that only the real iSCSI targets are exported.
No targets are exported if the value of the object
is '00'H."
DEFVAL { {} }
::= { iscsiImprtExprtTgtsConfEntry 2 }
iscsiAuthMethod OBJECT-TYPE
SYNTAX IscsiAuthMethod
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The global authentication method for iSCSI."
DEFVAL { {} }
::= { ciScsiConfig 2 }
--
-- iscsi2FcNodeTable
--
iscsi2FcNodeTable OBJECT-TYPE
SYNTAX SEQUENCE OF Iscsi2FcNodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists all the nodes in the iSCSI domain
which are currently represented in the FC domain.
Entries in this table are automatically created when
an iSCSI initiator logs (starts a session) into a target
or an iSCSI target is discovered. Entries are also
created when targets are exported from the iSCSI domain
into FC.
Entries in this table are automatically removed when an
iSCSI initiator logs out of all targets or an iSCSI
target disappears.
Entries also can be created and deleted using the
iscsi2FcNodeRowStatus object.
If the entry created in this table exposes either iSCSI
initiator or iSCSI target or both from the local device,
then a entry has to be created implicitly by the agent
in the cIscsiNodeAttributesTable when an entry is
created in this table.
A row in this table can not be made 'active' until values
are explicitly provided for that row's instances of
iscsi2FcNodeName and iscsi2FcNodeRole.
The following objects cannot be modified when the
iscsi2FcNodeRowStatus is 'active' :
iscsi2FcNodeName
iscsi2FcNodeRole
To modify the above objects, the entry must be deleted
and re-created with new values of above objects.
Every node in this table is associated with a iSCSI
instance which is uniquely identified by
cIscsiInstIndex."
::= { ciScsiConfig 3 }
iscsi2FcNodeEntry OBJECT-TYPE
SYNTAX Iscsi2FcNodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry representing an iSCSI node which is presented
as a FC node to the FC domain."
INDEX { cIscsiInstIndex, iscsi2FcNodeIndex }
::= { iscsi2FcNodeTable 1 }
Iscsi2FcNodeEntry ::=
SEQUENCE {
iscsi2FcNodeIndex Unsigned32,
iscsi2FcNodeName IscsiName,
iscsi2FcNodeRole CIscsiNodeRoles,
iscsi2FcNodePersistentFCAddr TruthValue,
iscsi2FcPortPersistentFCAddr TruthValue,
iscsi2FcPortNumFCAddr Unsigned32,
iscsi2FcNodeFCAddr FcNameIdOrZero,
iscsi2FcPortFCAddrListIndex ListIndexOrZero,
iscsi2FcNodeVsanList2k FcList,
iscsi2FcNodeVsanList4k FcList,
iscsi2FcNodeDiscovered TruthValue,
iscsi2FcNodeRowStatus RowStatus,
iscsi2FcNodeFcAddrAssignment INTEGER,
iscsi2FcNodeAuthUser SnmpAdminString,
iscsi2FcTargetUserName SnmpAdminString,
iscsi2FcTargetPassword SnmpAdminString
}
iscsi2FcNodeIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer value, which identifies an iSCSI
node in a FC domain."
::= { iscsi2FcNodeEntry 1 }
iscsi2FcNodeName OBJECT-TYPE
SYNTAX IscsiName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A character string that is a globally unique identifier
for the node represented by this entry. The node name
is independent of the location of the node, and can be
resolved into a set of addresses through various
discovery services."
::= { iscsi2FcNodeEntry 2 }
iscsi2FcNodeRole OBJECT-TYPE
SYNTAX CIscsiNodeRoles
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The role of the node represented by this entry.
Note that a gateway implementation may choose not to
allow a node to operate in both roles."
::= { iscsi2FcNodeEntry 3 }
iscsi2FcNodePersistentFCAddr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates if the node FC Address
(iscsi2FcNodeFCAddr) is made persistent or not. If this
object is 'true', then the same FC address is assigned to
the node if it were to be represented again in the FC
domain with the same node name. Note that the node FC
address is either automatically assigned or manually
configured."
::= { iscsi2FcNodeEntry 4 }
iscsi2FcPortPersistentFCAddr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates if the port FC addresses (given
by iscsi2FcPortFCAddrListIndex) of this node is made
persistent or not.
If this object is 'true', then the same FC address is
assigned to the ports of the node if it were to be
represented again in the FC domain with the same node
name. Note that the port FC address is either
automatically assigned or manually configured.
If this object is 'false', then iscsi2FcPortNumFCAddr
and iscsi2FcPortFCAddrListIndex are not valid as
port FC addresses are dynamically assigned/released."
::= { iscsi2FcNodeEntry 5 }
iscsi2FcPortNumFCAddr OBJECT-TYPE
SYNTAX Unsigned32 (0..64)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of persistent port FC addresses that are
automatically assigned to ports associated with this
node. The fcAddressListTable contains the FC addresses
that are assigned for the node represented by this entry.
If the value of this object is 0, then the port FC
addresses are not automatically assigned.
Otherwise :
- the entries in the fcAddressListTable corresponding to
this automatic assignment as indicated by the object
iscsi2FcPortFCAddrListIndex cannot be either modified
or deleted.
- new entries cannot be created in the fcAddressListTable
with fcAddressListIndex which is equal to corresponding
iscsi2FcPortFCAddrListIndex for this instance.
- the corresponding iscsi2FcPortFCAddrListIndex cannot be
changed.
If the value of the object iscsi2FcPortPersistentFCAddr
is 'false', then this object cannot be modified."
::= { iscsi2FcNodeEntry 6 }
iscsi2FcNodeFCAddr OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The persistent FC address of the node. If this object
is zero-length and iscsi2FcNodePersistentFCAddr is
'true' then the FC address of the node represented by
this entry is automatically assigned and made persistent.
If this object is non-zero length and
iscsi2FcNodePersistentFCAddr is 'true', then this value
is always used as FC address of the node represented by
this entry. If iscsi2FcNodePersistentFCAddr is 'false,
this object is not valid. The FC address for the node
represented by this entry is dynamically
assigned/released when the node represented by this entry
is created/destroyed."
::= { iscsi2FcNodeEntry 7 }
iscsi2FcPortFCAddrListIndex OBJECT-TYPE
SYNTAX ListIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of a list in the fcAddressListTable which
lists all the FC port addresses associated with this
node.
The object value of the iscsi2FcPortPersistentFCAddr
indicates if the addresses are persistent or not.
Note that this object cannot be modified if the
corresponding value of iscsi2FcPortNumFCAddr is non-zero.
If the value of the object iscsi2FcPortPersistentFCAddr
is 'false', then this object cannot be modified."
::= { iscsi2FcNodeEntry 8 }
iscsi2FcNodeVsanList2k OBJECT-TYPE
SYNTAX FcList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The list of VSANs the node represented by this entry
can access.
Each octet within the value of this object specifies a
set of eight VSANs, with the first octet specifying
VSANs 0 through 7, the second octet specifying VSANs 8
through 15, etc. Within each octet, the most significant
bit represents the lowest numbered VSAN, and the least
significant bit represents the highest numbered VSAN.
Thus, each VSAN, is represented by a single bit within
the value of this object. The corresponding VSAN is
allowed on the node represented by this entry if and
only if that bit has a value of '1'. If this object has
a value which is less than 256 bytes long, then the
VSANs which are not represented are not considered to be
in this list.
If this object is a zero-length string, the node
represented by this entry can access only the default
VSAN."
DEFVAL {''H}
::= { iscsi2FcNodeEntry 9 }
iscsi2FcNodeVsanList4k OBJECT-TYPE
SYNTAX FcList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The list of VSANs the node represented by this entry
can access.
Each octet within the value of this object specifies a
set of eight VSANs, with the first octet specifying
VSANs 2047 through 2054, the second octet specifying
VSANs 2055 through 2062, etc. Within each octet, the
most significant bit represents the lowest numbered
VSAN, and the least significant bit represents the
highest numbered VSAN. Thus, each VSAN, is represented
by a single bit within the value of this object. The
corresponding VSAN is allowed on the node represented by
this entry if and only if that bit has a value of '1'.
If this object has a value which is less than 256 bytes
long, then the VSANs which are not represented are not
considered to be in the list.
If this object is a zero-length string, the node
represented by this entry can access only the default
VSAN."
DEFVAL {''H}
::= { iscsi2FcNodeEntry 10 }
iscsi2FcNodeDiscovered OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This objects indicates if the node represented by this
entry was either automatically discovered or configured
manually.
If the value of this object is 'true', then the node
represented by this entry is automatically discovered.
If it is 'false', then the node represented by this entry
was manually configured.
An auto discovered node can be made manually configured
node by setting this object to 'false'.
Note that setting to 'false' when current value of the
object is 'false' results in error. Also, object cannot
be set to 'true'."
::= { iscsi2FcNodeEntry 11 }
iscsi2FcNodeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of this row."
::= { iscsi2FcNodeEntry 12 }
iscsi2FcNodeFcAddrAssignment OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
manual (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies how the FC address of this node
is assigned.
If set to 'auto', the FC address is automatically
assigned to this node. If it is 'manual', then the FC
address has to be configured manually.
An auto assigned node FC address can be made manually
configured by setting this object to 'manual' and vice
versa."
DEFVAL { auto }
::= { iscsi2FcNodeEntry 13 }
iscsi2FcNodeAuthUser OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of the user which is to be sent with iSCSI
authentication to the target, if authentication is
enabled (iscsiAuthMethod other than 'none') interface
on which carries session between initiator and target."
DEFVAL { ''H }
::= { iscsi2FcNodeEntry 14 }
iscsi2FcTargetUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The user name to be used during the login
authentication. This is optional. If no user
name and password (defined by iscsi2FcTargetPassword
) is specified, then the global username and
password defined by iscsiTargetUserName and
iscsiTargetPassword (respectively) are used."
DEFVAL { ''H }
::= { iscsi2FcNodeEntry 15 }
iscsi2FcTargetPassword OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The password to be used during the login
authentication. This is optional. If no user
name (specified by iscsi2FcTargetUserName )and
password is specified, then the global username
and password defined by iscsiTargetUserName and
iscsiTargetPassword (respectively) is used.
When read, it returns zero length string."
DEFVAL { ''H }
::= { iscsi2FcNodeEntry 16 }
-- fc2IscsiNodeTable
fc2IscsiNodeTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fc2IscsiNodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists all the FC nodes which the gateway
presents as iSCSI nodes to the iSCSI domain.
Entries in this table are automatically created when
FC nodes are discovered.
Entries in this table are automatically removed when
FC nodes go offline.
Entries also can be created/deleted using the
fc2IscsiNodeRowStatus object. An entry can be created by
to configure a node statically instead of allowing it to
be discovered.
A row in this table can not be made 'active' until values
are explicitly provided for that row's instances of
fc2IscsiNodeName and fc2IscsiNodeRole.
The following objects cannot be modified when the
fc2IscsiNodeRowStatus is 'active' :
- fc2IscsiNodeRole
- fc2IscsiNodeName
To modify the above objects, the entry must be deleted
and re-created with new values of above objects.
To create an iSCSI target from whole a FC target, use
fc2ScsiPortFCAddrListIndex.
To create an iSCSI target from Logical Units on the
FC targets, create an entry in this table. And
then create an entry (s) in the scsiLuExtTable using
fc2IscsiNodeName of an entry in this table as
scsiLuExtLocalTargetAddress value."
::= { ciScsiConfig 4 }
fc2IscsiNodeEntry OBJECT-TYPE
SYNTAX Fc2IscsiNodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry representing a FC node which is presented as an
iSCSI node to the iSCSI domain."
AUGMENTS {cIscsiNodeAttributesEntry}
::= { fc2IscsiNodeTable 1 }
Fc2IscsiNodeEntry ::=
SEQUENCE {
fc2IscsiNodeRole CIscsiNodeRoles,
fc2IscsiNodeName IscsiName,
fc2IscsiPortFCAddrListIndex ListIndexOrZero,
fc2IscsiNodePermitListIndex ListIndexOrZero,
fc2IscsiNodeAdvIntfListIndex ListIndexOrZero,
fc2IscsiNodeAllIntrAccessAllowed TruthValue,
fc2IscsiNodeDiscovered TruthValue,
fc2IscsiNodeRowStatus RowStatus,
fc2IscsiNodeTrespassMode TruthValue,
fc2IscsiNodeRevertToPrimaryPort TruthValue
}
fc2IscsiNodeRole OBJECT-TYPE
SYNTAX CIscsiNodeRoles
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Role of the node represented by this entry.
Note that a gateway implementation may choose not to
allow a node to operate in both roles."
::= { fc2IscsiNodeEntry 1 }
fc2IscsiNodeName OBJECT-TYPE
SYNTAX IscsiName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The iSCSI name of the node represented by this entry."
::= { fc2IscsiNodeEntry 2 }
fc2IscsiPortFCAddrListIndex OBJECT-TYPE
SYNTAX ListIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of a list in the fcAddressListTable which
lists all the FC node addresses associated with the
node represented by this entry.
Use this object to represent the whole FC targets."
::= { fc2IscsiNodeEntry 3 }
fc2IscsiNodePermitListIndex OBJECT-TYPE
SYNTAX ListIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of a list in the iscsiNodeNameListTable which
lists all the iSCSI nodes that are permitted to access
the node represented by this entry.
If fc2IscsiNodeAllIntrAccessAllowed is 'false' and the
value of this object is 0, then no initiators are allowed
to access this target."
::= { fc2IscsiNodeEntry 4 }
fc2IscsiNodeAdvIntfListIndex OBJECT-TYPE
SYNTAX ListIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of a list in the nodeAdvIntfListTable which
lists all the interfaces on which the node represented
by this entry could be advertised."
::= { fc2IscsiNodeEntry 5 }
fc2IscsiNodeAllIntrAccessAllowed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates if all the initiators can access
the target represented by this entry. If this object is
'true', then all the initiators can access this target
even those which are not in the initiator permit list
(fc2IscsiNodePermitListIndex) of the target represented
by this entry.
If this object is false, then only initiators which are
in the permit list are allowed access to the target
represented by this entry.
Note that this object is valid only if the role of
the node represented by this entry is 'targetTypeNode'."
DEFVAL { false }
::= { fc2IscsiNodeEntry 6 }
fc2IscsiNodeDiscovered OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This objects indicates if the node represented by this
entry was either automatically discovered or configured
manually.
If the value of this object is 'true', then the node
represented by this entry is automatically discovered.
If it is 'false', then the node represented by this entry
was manually configured."
::= { fc2IscsiNodeEntry 7 }
fc2IscsiNodeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of this row."
::= { fc2IscsiNodeEntry 8 }
fc2IscsiNodeTrespassMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The trespass mode for this node.
Every iSCSI target represents one or more port(s) on the
FC target (fc2ScsiPortFCAddrListIndex).
If this object is 'true', the node instructs the FC node
to present all LUN I/O requests to secondary port
(fcSecondaryAddress) if the primary port (fcAddress) is
down.
Note that this object is valid only if fc2IscsiNodeRole
is 'targetTypeNode'."
DEFVAL { false }
::= { fc2IscsiNodeEntry 9 }
fc2IscsiNodeRevertToPrimaryPort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates if it is required to revert back
to primary port the FC target if it comes back online.
Every iSCSI target represent one or more port(s) on the
FC target (fc2IscsiPortFCAddrListIndex). Only one of
the ports is the primary port. If the primary port goes
down, the designated secondary port takes over. This
objects indicates if the primary port has to be used
used once it comes back up.
Note that this object is valid only if fc2IscsiNodeRole
is 'targetTypeNode'."
DEFVAL { false }
::= { fc2IscsiNodeEntry 10 }
-- fcAddressListTable
fcAddressListTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcAddressListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the list of FC addresses.
Entries in this table are automatically created/deleted
when the FC addresses are automatically
assigned/released to/from the entities which are using
this table to create FC address lists.
Entries in this table are also created/deleted using
fcAddressRowStatus.
A row in this table can not be made 'active' until a
value is explicitly provided for that row's instances
of fcAddress.
Also, the following object cannot be modified when
'fcAddressRowStatus' is 'active' :
- fcAddress
To modify the above object, the entry must be deleted and
re-created with new value of above object."
::= { ciScsiConfig 5 }
fcAddressListEntry OBJECT-TYPE
SYNTAX FcAddressListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry information about a FC address which is part
of a list. Entries with same fcAddressListIndex form a
list."
INDEX { fcAddressListIndex, fcAddressIndex }
::= { fcAddressListTable 1 }
FcAddressListEntry ::=
SEQUENCE {
fcAddressListIndex ListIndex,
fcAddressIndex Unsigned32,
fcAddress FcNameId,
fcSecondaryAddress FcNameIdOrZero,
fcAddressRowStatus RowStatus
}
fcAddressListIndex OBJECT-TYPE
SYNTAX ListIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of a list of FC addresses."
::= { fcAddressListEntry 1 }
fcAddressIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer value, which identifies a FC
address."
::= { fcAddressListEntry 2 }
fcAddress OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The FC address for this entry."
::= { fcAddressListEntry 3 }
fcSecondaryAddress OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The secondary FC address for this entry.
This is the FC address used if the 'fcAddress' cannot be
reached. Note that every 'fcAddress' may not need a
secondary FC Address."
DEFVAL { ''H }
::= { fcAddressListEntry 4 }
fcAddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of this row."
::= { fcAddressListEntry 5}
-- nodeNameListTable
iscsiNodeNameListTable OBJECT-TYPE
SYNTAX SEQUENCE OF IscsiNodeNameListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the list of iSCSI node names.
A row in this table can not be made 'active' until a
value is explicitly provided for that row's instances
of iscsiNodeName.
Also, the following objects cannot be modified when
'iscsiNodeNameRowStatus' is 'active' :
- iscsiNodeName
To modify the above object, the entry must be deleted and
re-created with new value of above object."
::= { ciScsiConfig 6 }
iscsiNodeNameListEntry OBJECT-TYPE
SYNTAX IscsiNodeNameListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry information about an iSCSI node name which is
part of a list. Entries with same iscsiNodeNameListIndex
form a list."
INDEX { iscsiNodeNameListIndex, iscsiNodeNameIndex }
::= { iscsiNodeNameListTable 1 }
IscsiNodeNameListEntry ::=
SEQUENCE {
iscsiNodeNameListIndex ListIndex,
iscsiNodeNameIndex Unsigned32,
iscsiNodeName IscsiName,
iscsiNodeNameRowStatus RowStatus
}
iscsiNodeNameListIndex OBJECT-TYPE
SYNTAX ListIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of a list of iSCSI node names."
::= { iscsiNodeNameListEntry 1 }
iscsiNodeNameIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer value, which identifies a iSCSI
node name."
::= { iscsiNodeNameListEntry 2 }
iscsiNodeName OBJECT-TYPE
SYNTAX IscsiName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The iSCSI node name."
::= { iscsiNodeNameListEntry 3 }
iscsiNodeNameRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of this row."
::= { iscsiNodeNameListEntry 4 }
-- nodeAdvIntfListTable
nodeAdvIntfListTable OBJECT-TYPE
SYNTAX SEQUENCE OF NodeAdvIntfListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the list of advertised
interface list.
A FC node represented in the iSCSI domain as an iSCSI
node is advertised only on the interfaces which are
allowed advertised interface list of the iSCSI node.
A row in this table can not be made 'active' until a
value is explicitly provided for that row's instances
of nodeAdvIntfIfIndex.
Also, the following object cannot be modified when
'nodeAdvIntfIfRowStatus' is 'active' :
- nodeAdvIntfIfIndex
To modify the above object, the entry must be deleted and
re-created with new value of above object."
::= { ciScsiConfig 7 }
nodeAdvIntfListEntry OBJECT-TYPE
SYNTAX NodeAdvIntfListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry with containing ifIndex of an interface which
is part of the interface list. Entries with same
nodeAdvIntfListIndex form a list."
INDEX { nodeAdvIntfListIndex, nodeAdvIntfIndex}
::= { nodeAdvIntfListTable 1 }
NodeAdvIntfListEntry ::=
SEQUENCE {
nodeAdvIntfListIndex Unsigned32,
nodeAdvIntfIndex Unsigned32,
nodeAdvIntfIfIndex InterfaceIndex,
nodeAdvIntfIfRowStatus RowStatus
}
nodeAdvIntfListIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of a list of advertized interface list."
::= { nodeAdvIntfListEntry 1 }
nodeAdvIntfIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of an interface entry."
::= { nodeAdvIntfListEntry 2 }
nodeAdvIntfIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ifIndex of the interface."
::= { nodeAdvIntfListEntry 3 }
nodeAdvIntfIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of this row."
::= { nodeAdvIntfListEntry 4 }
-- extension to the scsiLuTable from SCSI-MIB.
scsiLuExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF ScsiLuExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An extension of the scsiLuTable to support creation of
iSCSI virtual targets from LUs on remote FC targets.
To create iSCSI virtual targets from a set of LUs on FC
targets, entries needs to be created in this table. The
iSCSI targets can be created in different ways. For
example:
- multiple iSCSI targets can be created from either one
LU or a subset of LUs from a single FC target device.
- a single iSCSI target can be created from LUs of
multiple FC target devices.
Note that a gateway implementation may choose to support
only a subset of these features.
To create a virtual iSCSI target from LUs on the remote
FC targets, create an entry (s) in this table with
local LUs to map to remote LUs and
value of scsiLuExtLocalTargetAddress to same as the
iSCSI node name of the virtual iSCSI node being created.
A row in this table can not be made 'active' until a
value is explicitly provided for that row's instances
of following objects :
- scsiLuExtRemotePortFcAddress
- scsiLuExtLocalTargetAddress
- scsiLuExtLocalLun
- scsiLuExtRemoteLun
Also, the following objects cannot be modified when
'scsiLuExtRowStatus 'active' :
- scsiLuExtRemotePortFcAddress
- scsiLuExtLocalTargetAddress
- scsiLuExtLocalLun
- scsiLuExtRemoteLun
To modify the above objects, the entry must be deleted
and re-created with new values of above objects."
::= { ciScsiConfig 8 }
scsiLuExtEntry OBJECT-TYPE
SYNTAX ScsiLuExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry representing a LU."
AUGMENTS { ciscoScsiLuEntry }
::= { scsiLuExtTable 1 }
ScsiLuExtEntry ::=
SEQUENCE {
scsiLuExtRemotePortFcAddress FcNameId,
scsiLuExtRemotePortSecFcAddress FcNameIdOrZero,
scsiLuExtLocalTargetAddress ScsiName,
scsiLuExtRemoteLun ScsiLUNOrZero,
scsiLuExtLocalLun ScsiLUNOrZero,
scsiLuExtRowStatus RowStatus,
scsiLuExtRemoteSecLun ScsiLUNOrZero
}
scsiLuExtRemotePortFcAddress OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The FC address of the remote Fibre Channel port via
which the remote LU (scsiLuExtRemoteLun) is accessed."
::= { scsiLuExtEntry 1 }
scsiLuExtRemotePortSecFcAddress OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The secondary FC address of the remote Fibre Channel
port via which the remote LU (scsiLuExtRemoteSecLun) is
accessed."
DEFVAL { ''H }
::= { scsiLuExtEntry 2 }
scsiLuExtLocalTargetAddress OBJECT-TYPE
SYNTAX ScsiName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the SCSI name of the
local SCSI target through which this LU
(scsiLuExtLocalLun) can be accessed. The format of a
SCSI name is dependent on the type of transport used to
access the target. For example, when the local SCSI
target is accessible via iSCSI, then this object
contains the iSCSI node name of the local target."
::= { scsiLuExtEntry 3 }
scsiLuExtRemoteLun OBJECT-TYPE
SYNTAX ScsiLUNOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Logical Unit Number of the remote LU."
::= { scsiLuExtEntry 4 }
scsiLuExtLocalLun OBJECT-TYPE
SYNTAX ScsiLUNOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The configured default Logical Unit Number of this LU."
::= { scsiLuExtEntry 5 }
scsiLuExtRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of this row."
::= { scsiLuExtEntry 6 }
scsiLuExtRemoteSecLun OBJECT-TYPE
SYNTAX ScsiLUNOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Logical Unit Number of the remote LU corresponding
to FC address scsiLuExtRemotePortSecFcAddress."
::= { scsiLuExtEntry 7 }
-- iSCSI interface configuration
iscsiIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IscsiIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of iSCSI interfaces."
::= { ciScsiConfig 9 }
iscsiIfEntry OBJECT-TYPE
SYNTAX IscsiIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information about an iSCSI
interface."
INDEX { ifIndex }
::= { iscsiIfTable 1 }
IscsiIfEntry ::=
SEQUENCE {
iscsiIfTcpKeepAliveTimeout Unsigned32,
iscsiIfTcpMaxBandwidth Unsigned32,
iscsiIfTcpMaxRetransmissions Unsigned32,
iscsiIfTcpMinRetransmitTime Unsigned32,
iscsiIfTcpPMTUEnable TruthValue,
iscsiIfTcpQOS Unsigned32,
iscsiIfTcpSACKEnable TruthValue,
iscsiIfTcpSendBufferSize Unsigned32,
iscsiIfTcpMinBandwidth Unsigned32,
iscsiIfTcpPMTUResetTimeout Unsigned32,
iscsiIfTcpLocalPort CiscoPort,
iscsiIfForwardingMode INTEGER,
iscsiIfIntrProxyMode TruthValue,
iscsiIfIntrProxyModeNodeFcAddr FcNameIdOrZero,
iscsiIfIntrProxyModePortFcAddr FcNameIdOrZero,
iscsiIfIntrProxyModeFcAddrAsgnmt INTEGER,
iscsiIfIntrIdentificationMode
CIscsiIntrIdentificationMode,
iscsiIfTcpRndTrpTimeEst Unsigned32,
iscsiIfTcpLocalTcpPort CiscoPort,
iscsiIfNumNormalConnections Unsigned32,
iscsiIfNumDiscovConnections Unsigned32,
iscsiIfTcpCWMEnable TruthValue,
iscsiIfTcpCWMBurstSize Unsigned32,
iscsiIfTcpMaxJitter Unsigned32
}
iscsiIfTcpKeepAliveTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..7200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP Keep alive timeout for this iSCSI interface.
If the value is 0, the keep-alive timeout feature is
disabled."
::= { iscsiIfEntry 1 }
iscsiIfTcpMaxBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (1000..1000000)
UNITS "kbps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP maximum bandwidth for this iSCSI interface."
::= { iscsiIfEntry 2 }
iscsiIfTcpMaxRetransmissions OBJECT-TYPE
SYNTAX Unsigned32 (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP maximum retransmissions for this iSCSI
interface."
::= { iscsiIfEntry 3 }
iscsiIfTcpMinRetransmitTime OBJECT-TYPE
SYNTAX Unsigned32 (250..5000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP minimum retransmit time for this iSCSI
interface."
::= { iscsiIfEntry 4 }
iscsiIfTcpPMTUEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This objects indicates if the Path MTU discovery option
is enabled or not for this iSCSI interface."
REFERENCE
"For more information on PMTU, refer RFC 1191."
::= { iscsiIfEntry 5 }
iscsiIfTcpQOS OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP QOS code point for this iSCSI interface."
REFERENCE
"RFC 2474, RFC 2780."
::= { iscsiIfEntry 6 }
iscsiIfTcpSACKEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if the Selective Acknowledgement
(SACK) option is enabled or not for this iSCSI
interface."
REFERENCE
"For more information on SACK, refer RFC 2018, RFC 2883."
::= { iscsiIfEntry 7 }
iscsiIfTcpSendBufferSize OBJECT-TYPE
SYNTAX Unsigned32 (0..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP send buffer size for this iSCSI interface."
::= { iscsiIfEntry 8 }
iscsiIfTcpMinBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (1000..1000000)
UNITS "kbps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP minimum bandwidth for this iSCSI interface."
::= { iscsiIfEntry 9 }
iscsiIfTcpPMTUResetTimeout OBJECT-TYPE
SYNTAX Unsigned32 (60..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout after which the PMTU resets to original
value on this interface."
::= { iscsiIfEntry 10 }
iscsiIfTcpLocalPort OBJECT-TYPE
SYNTAX CiscoPort
MAX-ACCESS read-only
STATUS deprecated --superceded by iscsiIfTcpLocalTcpPort
DESCRIPTION
"The local TCP port of this interface."
::= { iscsiIfEntry 11 }
iscsiIfForwardingMode OBJECT-TYPE
SYNTAX INTEGER {
passThrough (1),
storeAndForward (2),
cutThrough(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The forwarding mode of this interface.
passThrough - In this mode the iSCSI interface
converts an iSCSI PDU into a FCP
frame and then forwards it one at
a time.
storeAndForward - In this mode iSCSI payload data
is sent or received at the size desired
by the iSCSI client. The interface
stores each TCP segment it receives
until one full iSCSI PDU is received
before forwarding it as FC frames.
cutThrough - In this mode iSCSI payload data is sent
or received at the size desired by the
iSCSI client. The interface stores each
TCP segment until one full iSCSI PDU is
received before forwarding it as as FC
frames.
"
::= { iscsiIfEntry 12 }
iscsiIfIntrProxyMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The initiator proxy mode for this interface. If this
object is 'true', then all the initiators coming on this
interface would use the initiator configuration provided
by this interface. The initiator configuration include
port WWN and node WWN."
::= { iscsiIfEntry 13 }
iscsiIfIntrProxyModeNodeFcAddr OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Node FC address used by the initiators on this
interface when the initiator proxy mode is on
(iscsiIfIntrProxyMode equal to 'true')."
::= { iscsiIfEntry 14 }
iscsiIfIntrProxyModePortFcAddr OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Port FC address used by the initiators on this
interface when the initiator proxy mode is on
(iscsiIfIntrProxyMode equal to 'true')."
::= { iscsiIfEntry 15 }
iscsiIfIntrProxyModeFcAddrAsgnmt OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
manual (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This objects tells how the initiator proxy mode FC
addresses (iscsiIfIntrProxyModeNodeFcAddr and
iscsiIfIntrProxyModePortFcAddr) are assigned.
If value of this object is 'auto', then the FC addresses
are automatically assigned. If it is 'manual', then
they have to be manually configured."
::= { iscsiIfEntry 16 }
iscsiIfIntrIdentificationMode OBJECT-TYPE
SYNTAX CIscsiIntrIdentificationMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This objects indicates how the initiator is identified
on this interface, either by its iSCSI name (name) or by
its IP address (ipaddress)."
::= { iscsiIfEntry 17 }
iscsiIfTcpRndTrpTimeEst OBJECT-TYPE
SYNTAX Unsigned32 (0..300000)
UNITS "microseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an estimate of the round trip delay of the network
pipe used for the B-D product computation, which lets us
derive the TCP receive window to advertise."
::= { iscsiIfEntry 18 }
iscsiIfTcpLocalTcpPort OBJECT-TYPE
SYNTAX CiscoPort
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local TCP port of this interface."
::= { iscsiIfEntry 19 }
iscsiIfNumNormalConnections OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of normal iscsi connections."
::= { iscsiIfEntry 20 }
iscsiIfNumDiscovConnections OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discovery iscsi connections."
::= { iscsiIfEntry 21 }
iscsiIfTcpCWMEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for enabling/disabling the
congestion window monitoring. If the value of
this object is true(1), it is enabled. It is
disabled if the value is false(2). "
DEFVAL {true}
::= { iscsiIfEntry 22 }
iscsiIfTcpCWMBurstSize OBJECT-TYPE
SYNTAX Unsigned32 (10..100)
UNITS "kilobytes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum burst sent after a tcp sender idle
period."
DEFVAL {50}
::= { iscsiIfEntry 23 }
iscsiIfTcpMaxJitter OBJECT-TYPE
SYNTAX Unsigned32 (0..10000)
UNITS "microseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum delay variation that is not due to
to congestion that can be experienced by TCP
connections on this interface."
DEFVAL {500}
::= { iscsiIfEntry 24 }
--
-- iSCSI configuration for GigE interfaces
--
iscsiGigEIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IscsiGigEIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Gigabit Ethernet (GigE) interfaces.
It contains iSCSI-specific configuration objects for the
GigE interface."
::= { ciScsiConfig 10 }
iscsiGigEIfEntry OBJECT-TYPE
SYNTAX IscsiGigEIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information about a GigE
interface."
INDEX { ifIndex }
::= { iscsiGigEIfTable 1 }
IscsiGigEIfEntry ::=
SEQUENCE {
iscsiGigEIfAuthMethod IscsiAuthMethod,
iscsiGigEIfIsnsServerProfileName SnmpAdminString,
iscsiGigEIfIscsiSessions Unsigned32
}
iscsiGigEIfAuthMethod OBJECT-TYPE
SYNTAX IscsiAuthMethod
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The authentication method for this interface."
::= { iscsiGigEIfEntry 1 }
iscsiGigEIfIsnsServerProfileName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The iSNS server profile name for this interface.
The iSNS server profiles are defined in
cIsnsClntServerProfileTable from CISCO-ISNS-CLIENT-MIB."
::= { iscsiGigEIfEntry 2 }
iscsiGigEIfIscsiSessions OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of iSCSI sessions running over this interface."
::= { iscsiGigEIfEntry 3 }
--
-- Gateway idle timeout
--
iscsiInitiatorIdleTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time for which the gateway (representing a FC
target) waits from the time of last iSCSI session to a
iSCSI initiator went down, before purging the
information about that iSCSI initiator."
::= { ciScsiConfig 11 }
iscsiIntrIdentificationMode OBJECT-TYPE
SYNTAX CIscsiIntrIdentificationMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This objects indicates how the initiator is identified
on local device, either by its iSCSI name (name) or by
its IP address (ipaddress)."
::= { ciScsiConfig 12 }
iscsiTargetUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The global user name to be used during the
login authentication. If the initiator specific
username is specified by iscsi2FcTargetUserName,
then that user name is used.
If not, iscsiTargetUserName is used by default."
DEFVAL { ''H }
::= { ciScsiConfig 13 }
iscsiTargetPassword OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password to be used during the login
authentication. If the initiator specific
password is specified by iscsi2FcTargetPassword,
then that password is used.
If not, iscsiTargetPassword is used by default.
When read, a zero length string is returned."
DEFVAL { ''H }
::= { ciScsiConfig 14 }
--
-- Status and Statistics
--
iscsiSessionAttributesExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF IscsiSessionAttributesExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains objects which provide more
information about iSCSI sessions which are not in
cIscsiSessionAttributesTable."
::= { ciScsiStatistics 1 }
iscsiSessionAttributesExtEntry OBJECT-TYPE
SYNTAX IscsiSessionAttributesExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information about an iSCSI
session which is not in cIscsiSessionAttributesEntry."
AUGMENTS {cIscsiSessionAttributesEntry}
::= { iscsiSessionAttributesExtTable 1 }
IscsiSessionAttributesExtEntry ::=
SEQUENCE {
iscsiSsnVsan VsanIndex
}
iscsiSsnVsan OBJECT-TYPE
SYNTAX VsanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vsan to which this session belongs to."
::= { iscsiSessionAttributesExtEntry 1 }
--
-- iscsi Connection Statstistics Table
--
ciscsiConnectionStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscsiConnectionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains objects which provide
iSCSI connection statistics."
::= { ciScsiStatistics 2 }
ciscsiConnectionStatsEntry OBJECT-TYPE
SYNTAX CiscsiConnectionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information about iSCSI
connection statistics."
INDEX { ifIndex, cIscsiInstIndex, cIscsiStatsNodeIndex,
cIscsiStatsSessionIndex,
cIscsiStatsConnectionIndex }
::= { ciscsiConnectionStatsTable 1 }
CiscsiConnectionStatsEntry ::=
SEQUENCE {
cIscsiStatsNodeIndex Unsigned32,
cIscsiStatsSessionIndex Unsigned32,
cIscsiStatsConnectionIndex Unsigned32,
cIscsiStatsConnectionRxBytes Counter64,
cIscsiStatsConnectionTxBytes Counter64,
cIscsiStatsIpSecInUse TruthValue
}
cIscsiStatsNodeIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer value, which identifies an iSCSI
node in a FC domain."
::= { ciscsiConnectionStatsEntry 1 }
cIscsiStatsSessionIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer value, which identifies an iSCSI
session."
::= { ciscsiConnectionStatsEntry 2 }
cIscsiStatsConnectionIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer value, which identifies an iSCSI
connection. "
::= { ciscsiConnectionStatsEntry 3 }
cIscsiStatsConnectionRxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes received on an iSCSI
session."
::= { ciscsiConnectionStatsEntry 4 }
cIscsiStatsConnectionTxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes transmitted on an iSCSI
session."
::= { ciscsiConnectionStatsEntry 5 }
cIscsiStatsIpSecInUse OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether an iSCSI connection is secure
or not. If the value of this object is 'true', the
Ip Security is turned on and the connection is
secure. If 'false', Ip Security is not turned
on and the connection may be unsecure."
::= { ciscsiConnectionStatsEntry 6 }
-- Conformance
ciscoiScsiGwMIBCompliances
OBJECT IDENTIFIER ::= { ciscoiScsiGwMIBConformance 1 }
ciscoiScsiGwMIBGroups
OBJECT IDENTIFIER ::= { ciscoiScsiGwMIBConformance 2 }
ciscoiScsiGwMIBCompliance MODULE-COMPLIANCE
STATUS deprecated -- superceeded by
-- ciscoiScsiGwMIBCompliance1
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-ISCSI-GW-MIB."
MODULE MANDATORY-GROUPS { cigConfigurationGroup }
GROUP cigLuConfigurationGroup
DESCRIPTION
"Implementation of this group is mandatory for all
systems that support creation of iSCSI virtual targets
from LUs on remote FC targets."
OBJECT iscsi2FcNodeRole
SYNTAX BITS {
initiatorTypeNode (1)
}
DESCRIPTION
"Only initiatorTypeNode role need to be supported."
OBJECT fc2IscsiNodeRole
SYNTAX BITS {
targetTypeNode (0)
}
DESCRIPTION
"Only targetTypeNode role need to be supported."
OBJECT iscsi2FcNodeRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT fc2IscsiNodeRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT fcAddressRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT iscsiNodeNameRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT scsiLuExtRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
::= { ciscoiScsiGwMIBCompliances 1 }
ciscoiScsiGwMIBCompliance1 MODULE-COMPLIANCE
STATUS deprecated -- superceeded by
-- ciscoiScsiGwMIBCompliance2
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-ISCSI-GW-MIB."
MODULE MANDATORY-GROUPS { cigConfigurationGroupRev1,
cigSessionStatsGroup,
cigIscsiIfGroup }
GROUP cigLuConfigurationGroupRev1
DESCRIPTION
"Implementation of this group is mandatory for all
systems that support creation of iSCSI virtual targets
from LUs on remote FC targets."
OBJECT iscsi2FcNodeRole
SYNTAX BITS {
initiatorTypeNode (1)
}
DESCRIPTION
"Only initiatorTypeNode role need to be supported."
OBJECT fc2IscsiNodeRole
SYNTAX BITS {
targetTypeNode (0)
}
DESCRIPTION
"Only targetTypeNode role need to be supported."
OBJECT iscsi2FcNodeRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT fc2IscsiNodeRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT fcAddressRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT iscsiNodeNameRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT scsiLuExtRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT iscsi2FcNodeDiscovered
MIN-ACCESS read-only
DESCRIPTION
"Only read-only need to be supported."
::= { ciscoiScsiGwMIBCompliances 2 }
ciscoiScsiGwMIBCompliance2 MODULE-COMPLIANCE
STATUS deprecated -- superceeed by ciscoiScsiGwMIBCompliance3
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-ISCSI-GW-MIB."
MODULE MANDATORY-GROUPS { cigConfigurationGroupRev2,
cigSessionStatsGroup,
cigIscsiIfGroupRev1,
cigIscsiAuthGroup,
cigIscsiGigEIfGroup }
GROUP cigLuConfigurationGroupRev1
DESCRIPTION
"Implementation of this group is mandatory for all
systems that support creation of iSCSI virtual targets
from LUs on remote FC targets."
OBJECT iscsi2FcNodeRole
SYNTAX BITS {
initiatorTypeNode (1)
}
DESCRIPTION
"Only initiatorTypeNode role need to be supported."
OBJECT fc2IscsiNodeRole
SYNTAX BITS {
targetTypeNode (0)
}
DESCRIPTION
"Only targetTypeNode role need to be supported."
OBJECT iscsi2FcNodeRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
MIN-ACCESS read-create
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT fc2IscsiNodeRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT fcAddressRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT iscsiNodeNameRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT scsiLuExtRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT iscsi2FcNodeDiscovered
MIN-ACCESS read-only
DESCRIPTION
"Only read-only need to be supported."
::= { ciscoiScsiGwMIBCompliances 3 }
ciscoiScsiGwMIBCompliance3 MODULE-COMPLIANCE
STATUS deprecated -- superceeded by
-- ciscoiScsiGwMIBCompliance4
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-ISCSI-GW-MIB."
MODULE MANDATORY-GROUPS { cigConfigurationGroupRev3,
cigSessionStatsGroup,
cigIscsiIfGroupRev3,
cigIscsiAuthGroup,
cigIscsiGigEIfGroup }
GROUP cigLuConfigurationGroupRev1
DESCRIPTION
"Implementation of this group is mandatory for all
systems that support creation of iSCSI virtual targets
from LUs on remote FC targets."
OBJECT iscsi2FcNodeRole
SYNTAX BITS {
initiatorTypeNode (1)
}
DESCRIPTION
"Only initiatorTypeNode role need to be supported."
OBJECT fc2IscsiNodeRole
SYNTAX BITS {
targetTypeNode (0)
}
DESCRIPTION
"Only targetTypeNode role need to be supported."
OBJECT iscsi2FcNodeRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT fc2IscsiNodeRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT fcAddressRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT iscsiNodeNameRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT scsiLuExtRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT iscsi2FcNodeDiscovered
MIN-ACCESS read-only
DESCRIPTION
"Only read-only need to be supported."
::= { ciscoiScsiGwMIBCompliances 4 }
ciscoiScsiGwMIBCompliance4 MODULE-COMPLIANCE
STATUS deprecated -- superceded by
-- ciscoiScsiGwMIBCompliance5
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-ISCSI-GW-MIB."
MODULE MANDATORY-GROUPS { cigConfigurationGroupRev3,
cigSessionStatsGroup,
cigIscsiIfGroupRev4,
cigIscsiAuthGroup,
cigIscsiGigEIfGroup }
GROUP cigLuConfigurationGroupRev1
DESCRIPTION
"Implementation of this group is mandatory for all
systems that support creation of iSCSI virtual targets
from LUs on remote FC targets."
OBJECT iscsi2FcNodeRole
SYNTAX BITS {
initiatorTypeNode (1)
}
DESCRIPTION
"Only initiatorTypeNode role need to be supported."
OBJECT fc2IscsiNodeRole
SYNTAX BITS {
targetTypeNode (0)
}
DESCRIPTION
"Only targetTypeNode role need to be supported."
OBJECT iscsi2FcNodeRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT fc2IscsiNodeRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT fcAddressRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT iscsiNodeNameRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT scsiLuExtRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT iscsi2FcNodeDiscovered
MIN-ACCESS read-only
DESCRIPTION
"Only read-only need to be supported."
::= { ciscoiScsiGwMIBCompliances 5 }
ciscoiScsiGwMIBCompliance5 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-ISCSI-GW-MIB."
MODULE MANDATORY-GROUPS { cigConfigurationGroupRev3,
cigConfigurationGroupSup1,
cigSessionStatsGroup,
cigIscsiIfGroupRev4,
cigIscsiIfGroupSup1,
cigIscsiAuthGroup,
cigIscsiAuthGroupSup1,
cigIscsiGigEIfGroup,
cigConnectionStatsGroup }
GROUP cigLuConfigurationGroupRev1
DESCRIPTION
"Implementation of this group is mandatory for all
systems that support creation of iSCSI virtual targets
from LUs on remote FC targets."
OBJECT iscsi2FcNodeRole
SYNTAX BITS {
initiatorTypeNode (1)
}
DESCRIPTION
"Only initiatorTypeNode role need to be supported."
OBJECT fc2IscsiNodeRole
SYNTAX BITS {
targetTypeNode (0)
}
DESCRIPTION
"Only targetTypeNode role need to be supported."
OBJECT iscsi2FcNodeRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT fc2IscsiNodeRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT fcAddressRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT iscsiNodeNameRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT scsiLuExtRowStatus
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to be
supported."
OBJECT iscsi2FcNodeDiscovered
MIN-ACCESS read-only
DESCRIPTION
"Only read-only need to be supported."
::= { ciscoiScsiGwMIBCompliances 6 }
-- Units of Conformance
cigConfigurationGroup OBJECT-GROUP
OBJECTS {
iscsiImprtExprtTgtsConfImport,
iscsiImprtExprtTgtsConfExport,
iscsi2FcNodeName,
iscsi2FcNodeRole,
iscsi2FcNodePersistentFCAddr,
iscsi2FcPortPersistentFCAddr,
iscsi2FcPortNumFCAddr,
iscsi2FcNodeFCAddr,
iscsi2FcPortFCAddrListIndex,
iscsi2FcNodeVsanList2k,
iscsi2FcNodeVsanList4k,
iscsi2FcNodeDiscovered,
iscsi2FcNodeRowStatus,
fc2IscsiNodeRole,
fc2IscsiNodeName,
fc2IscsiPortFCAddrListIndex,
fc2IscsiNodePermitListIndex,
fc2IscsiNodeAdvIntfListIndex,
fc2IscsiNodeAllIntrAccessAllowed,
fc2IscsiNodeDiscovered,
fc2IscsiNodeRowStatus,
fcAddress,
fcSecondaryAddress,
fcAddressRowStatus,
iscsiNodeName,
iscsiNodeNameRowStatus,
nodeAdvIntfIfIndex,
nodeAdvIntfIfRowStatus
}
STATUS deprecated -- superceeded by cigConfigurationGroupRev1
DESCRIPTION
"A collection of objects for iSCSI Gateway
configuration."
::= { ciscoiScsiGwMIBGroups 1 }
cigLuConfigurationGroup OBJECT-GROUP
OBJECTS {
scsiLuExtRemotePortFcAddress,
scsiLuExtRemotePortSecFcAddress,
scsiLuExtLocalTargetAddress,
scsiLuExtRemoteLun,
scsiLuExtLocalLun,
scsiLuExtRowStatus
}
STATUS deprecated -- superceeded by
-- cigLuConfigurationGroupRev1
DESCRIPTION
"A collection of objects for creation virtual iSCSI
targets from remote LUs."
::= { ciscoiScsiGwMIBGroups 2 }
cigSessionStatsGroup OBJECT-GROUP
OBJECTS {
iscsiSsnVsan
}
STATUS current
DESCRIPTION
"A collection of objects for iSCSI session statistics."
::= { ciscoiScsiGwMIBGroups 3 }
cigConfigurationGroupRev1 OBJECT-GROUP
OBJECTS {
iscsiImprtExprtTgtsConfImport,
iscsiImprtExprtTgtsConfExport,
iscsi2FcNodeName,
iscsi2FcNodeRole,
iscsi2FcNodePersistentFCAddr,
iscsi2FcPortPersistentFCAddr,
iscsi2FcPortNumFCAddr,
iscsi2FcNodeFCAddr,
iscsi2FcPortFCAddrListIndex,
iscsi2FcNodeVsanList2k,
iscsi2FcNodeVsanList4k,
iscsi2FcNodeDiscovered,
iscsi2FcNodeRowStatus,
iscsi2FcNodeFcAddrAssignment,
fc2IscsiNodeRole,
fc2IscsiNodeName,
fc2IscsiPortFCAddrListIndex,
fc2IscsiNodePermitListIndex,
fc2IscsiNodeAdvIntfListIndex,
fc2IscsiNodeAllIntrAccessAllowed,
fc2IscsiNodeDiscovered,
fc2IscsiNodeRowStatus,
fcAddress,
fcSecondaryAddress,
fcAddressRowStatus,
iscsiNodeName,
iscsiNodeNameRowStatus,
nodeAdvIntfIfIndex,
nodeAdvIntfIfRowStatus
}
STATUS deprecated -- superceeded by cigConfigurationGroupRev2
DESCRIPTION
"A collection of objects for iSCSI Gateway
configuration."
::= { ciscoiScsiGwMIBGroups 4 }
cigLuConfigurationGroupRev1 OBJECT-GROUP
OBJECTS {
scsiLuExtRemotePortFcAddress,
scsiLuExtRemotePortSecFcAddress,
scsiLuExtLocalTargetAddress,
scsiLuExtRemoteLun,
scsiLuExtLocalLun,
scsiLuExtRowStatus,
scsiLuExtRemoteSecLun
}
STATUS current
DESCRIPTION
"A collection of objects for creation virtual iSCSI
targets from remote LUs."
::= { ciscoiScsiGwMIBGroups 5 }
cigIscsiIfGroup OBJECT-GROUP
OBJECTS {
iscsiIfTcpKeepAliveTimeout,
iscsiIfTcpMaxBandwidth,
iscsiIfTcpMaxRetransmissions,
iscsiIfTcpMinRetransmitTime,
iscsiIfTcpPMTUEnable,
iscsiIfTcpQOS,
iscsiIfTcpSACKEnable,
iscsiIfTcpSendBufferSize,
iscsiIfTcpMinBandwidth,
iscsiIfTcpPMTUResetTimeout,
iscsiIfTcpLocalPort
}
STATUS deprecated -- superceeded by cigIscsiIfGroupRev1
DESCRIPTION
"A collection of objects for iSCSI interface
configuration and monitoring."
::= { ciscoiScsiGwMIBGroups 6 }
cigIscsiIfGroupRev1 OBJECT-GROUP
OBJECTS {
iscsiIfTcpKeepAliveTimeout,
iscsiIfTcpMaxBandwidth,
iscsiIfTcpMaxRetransmissions,
iscsiIfTcpMinRetransmitTime,
iscsiIfTcpPMTUEnable,
iscsiIfTcpQOS,
iscsiIfTcpSACKEnable,
iscsiIfTcpSendBufferSize,
iscsiIfTcpMinBandwidth,
iscsiIfTcpPMTUResetTimeout,
iscsiIfTcpLocalPort,
iscsiIfForwardingMode,
iscsiIfIntrProxyMode,
iscsiIfIntrProxyModeNodeFcAddr,
iscsiIfIntrProxyModePortFcAddr,
iscsiIfIntrProxyModeFcAddrAsgnmt
}
STATUS deprecated -- superceeded by cigIscsiIfGroupRev2
DESCRIPTION
"A collection of objects for iSCSI interface
configuration and monitoring."
::= { ciscoiScsiGwMIBGroups 7 }
cigIscsiAuthGroup OBJECT-GROUP
OBJECTS {
iscsiAuthMethod,
iscsi2FcNodeAuthUser,
iscsiGigEIfAuthMethod
}
STATUS current
DESCRIPTION
"A collection of objects for iSCSI authentication."
::= { ciscoiScsiGwMIBGroups 8 }
cigConfigurationGroupRev2 OBJECT-GROUP
OBJECTS {
iscsiImprtExprtTgtsConfImport,
iscsiImprtExprtTgtsConfExport,
iscsi2FcNodeName,
iscsi2FcNodeRole,
iscsi2FcNodePersistentFCAddr,
iscsi2FcPortPersistentFCAddr,
iscsi2FcPortNumFCAddr,
iscsi2FcNodeFCAddr,
iscsi2FcPortFCAddrListIndex,
iscsi2FcNodeVsanList2k,
iscsi2FcNodeVsanList4k,
iscsi2FcNodeDiscovered,
iscsi2FcNodeRowStatus,
iscsi2FcNodeFcAddrAssignment,
fc2IscsiNodeRole,
fc2IscsiNodeName,
fc2IscsiPortFCAddrListIndex,
fc2IscsiNodePermitListIndex,
fc2IscsiNodeAdvIntfListIndex,
fc2IscsiNodeAllIntrAccessAllowed,
fc2IscsiNodeDiscovered,
fc2IscsiNodeRowStatus,
fc2IscsiNodeTrespassMode,
fc2IscsiNodeRevertToPrimaryPort,
fcAddress,
fcSecondaryAddress,
fcAddressRowStatus,
iscsiNodeName,
iscsiNodeNameRowStatus,
nodeAdvIntfIfIndex,
nodeAdvIntfIfRowStatus
}
STATUS deprecated -- superceeded by cigConfigurationGroupRev3
DESCRIPTION
"A collection of objects for iSCSI Gateway
configuration."
::= { ciscoiScsiGwMIBGroups 9 }
cigIscsiGigEIfGroup OBJECT-GROUP
OBJECTS {
iscsiGigEIfIsnsServerProfileName,
iscsiGigEIfIscsiSessions
}
STATUS current
DESCRIPTION
"A collection of objects for iSCSI GigE interface
configurations."
::= { ciscoiScsiGwMIBGroups 10 }
cigIscsiIfGroupRev2 OBJECT-GROUP
OBJECTS {
iscsiIfTcpKeepAliveTimeout,
iscsiIfTcpMaxBandwidth,
iscsiIfTcpMaxRetransmissions,
iscsiIfTcpMinRetransmitTime,
iscsiIfTcpPMTUEnable,
iscsiIfTcpQOS,
iscsiIfTcpSACKEnable,
iscsiIfTcpSendBufferSize,
iscsiIfTcpMinBandwidth,
iscsiIfTcpPMTUResetTimeout,
iscsiIfTcpLocalPort,
iscsiIfForwardingMode,
iscsiIfIntrProxyMode,
iscsiIfIntrProxyModeNodeFcAddr,
iscsiIfIntrProxyModePortFcAddr,
iscsiIfIntrProxyModeFcAddrAsgnmt
}
STATUS deprecated -- superceeded by cigIscsiIfGroupRev3
DESCRIPTION
"A collection of objects for iSCSI interface
configuration and monitoring."
::= { ciscoiScsiGwMIBGroups 11 }
cigConfigurationGroupRev3 OBJECT-GROUP
OBJECTS {
iscsiImprtExprtTgtsConfImport,
iscsiImprtExprtTgtsConfExport,
iscsi2FcNodeName,
iscsi2FcNodeRole,
iscsi2FcNodePersistentFCAddr,
iscsi2FcPortPersistentFCAddr,
iscsi2FcPortNumFCAddr,
iscsi2FcNodeFCAddr,
iscsi2FcPortFCAddrListIndex,
iscsi2FcNodeVsanList2k,
iscsi2FcNodeVsanList4k,
iscsi2FcNodeDiscovered,
iscsi2FcNodeRowStatus,
iscsi2FcNodeFcAddrAssignment,
fc2IscsiNodeRole,
fc2IscsiNodeName,
fc2IscsiPortFCAddrListIndex,
fc2IscsiNodePermitListIndex,
fc2IscsiNodeAdvIntfListIndex,
fc2IscsiNodeAllIntrAccessAllowed,
fc2IscsiNodeDiscovered,
fc2IscsiNodeRowStatus,
fc2IscsiNodeTrespassMode,
fc2IscsiNodeRevertToPrimaryPort,
fcAddress,
fcSecondaryAddress,
fcAddressRowStatus,
iscsiNodeName,
iscsiNodeNameRowStatus,
nodeAdvIntfIfIndex,
nodeAdvIntfIfRowStatus,
iscsiInitiatorIdleTimeout,
iscsiIntrIdentificationMode
}
STATUS current
DESCRIPTION
"A collection of objects for iSCSI Gateway
configuration."
::= { ciscoiScsiGwMIBGroups 12 }
cigIscsiIfGroupRev3 OBJECT-GROUP
OBJECTS {
iscsiIfTcpKeepAliveTimeout,
iscsiIfTcpMaxBandwidth,
iscsiIfTcpMaxRetransmissions,
iscsiIfTcpMinRetransmitTime,
iscsiIfTcpPMTUEnable,
iscsiIfTcpQOS,
iscsiIfTcpSACKEnable,
iscsiIfTcpSendBufferSize,
iscsiIfTcpMinBandwidth,
iscsiIfTcpPMTUResetTimeout,
iscsiIfTcpLocalPort,
iscsiIfForwardingMode,
iscsiIfIntrProxyMode,
iscsiIfIntrProxyModeNodeFcAddr,
iscsiIfIntrProxyModePortFcAddr,
iscsiIfIntrProxyModeFcAddrAsgnmt,
iscsiIfIntrIdentificationMode
}
STATUS deprecated -- superceded by cigIscsiIfGroupRev4
DESCRIPTION
"A collection of objects for iSCSI interface
configuration and monitoring."
::= { ciscoiScsiGwMIBGroups 13 }
cigIscsiIfGroupRev4 OBJECT-GROUP
OBJECTS {
iscsiIfTcpKeepAliveTimeout,
iscsiIfTcpMaxBandwidth,
iscsiIfTcpMaxRetransmissions,
iscsiIfTcpMinRetransmitTime,
iscsiIfTcpPMTUEnable,
iscsiIfTcpQOS,
iscsiIfTcpSACKEnable,
iscsiIfTcpSendBufferSize,
iscsiIfTcpMinBandwidth,
iscsiIfTcpPMTUResetTimeout,
iscsiIfForwardingMode,
iscsiIfIntrProxyMode,
iscsiIfIntrProxyModeNodeFcAddr,
iscsiIfIntrProxyModePortFcAddr,
iscsiIfIntrProxyModeFcAddrAsgnmt,
iscsiIfIntrIdentificationMode,
iscsiIfTcpLocalTcpPort,
iscsiIfTcpRndTrpTimeEst
}
STATUS current
DESCRIPTION
"An collection of objects for iSCSI interface
configuration and monitoring."
::= { ciscoiScsiGwMIBGroups 14 }
cigIscsiIfGroupSup1 OBJECT-GROUP
OBJECTS {
iscsiIfNumNormalConnections,
iscsiIfNumDiscovConnections,
iscsiIfTcpCWMEnable,
iscsiIfTcpCWMBurstSize,
iscsiIfTcpMaxJitter
}
STATUS current
DESCRIPTION
"A collection of objects for iSCSI interface
configuration and monitoring."
::= { ciscoiScsiGwMIBGroups 15 }
cigConnectionStatsGroup OBJECT-GROUP
OBJECTS {
cIscsiStatsConnectionTxBytes,
cIscsiStatsConnectionRxBytes,
cIscsiStatsIpSecInUse
}
STATUS current
DESCRIPTION
"A collection of objects for iSCSI connection
statistics."
::= { ciscoiScsiGwMIBGroups 16 }
cigConfigurationGroupSup1 OBJECT-GROUP
OBJECTS {
iscsiTargetUserName,
iscsiTargetPassword
}
STATUS current
DESCRIPTION
"A collection of objects for iSCSI Gateway
configuration."
::= { ciscoiScsiGwMIBGroups 17 }
cigIscsiAuthGroupSup1 OBJECT-GROUP
OBJECTS {
iscsi2FcTargetUserName,
iscsi2FcTargetPassword
}
STATUS current
DESCRIPTION
"A collection of objects for iSCSI authentication."
::= { ciscoiScsiGwMIBGroups 18 }
END
Reference in New Issue View Git Blame Copy Permalink