MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-IP-RAN-BACKHAUL-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

4058 lines
124 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-IP-RAN-BACKHAUL-MIB: MIB for providing information and
-- measurements on backhaul traffic used by the Cisco IP Radio
-- Access Network Transport optimization.
--
-- July 2005 John Linton
--
-- Copyright (c) 2004-2007, 2009-2010 by Cisco Systems Inc.
-- All rights reserved.
-- ****************************************************************
CISCO-IP-RAN-BACKHAUL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
Counter32,
Integer32,
Unsigned32,
MODULE-IDENTITY,
NOTIFICATION-TYPE,
OBJECT-TYPE
FROM SNMPv2-SMI
InetAddressType,
InetAddress,
InetPortNumber
FROM INET-ADDRESS-MIB
ifDescr,
ifIndex,
InterfaceIndex,
InterfaceIndexOrZero
FROM IF-MIB
PerfIntervalCount,
PerfCurrentCount
FROM PerfHist-TC-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
AutonomousType,
TimeStamp,
TruthValue,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoIpRanBackHaulMIB MODULE-IDENTITY
LAST-UPDATED "201005040000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems, Inc
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-ran-o@cisco.com"
DESCRIPTION
"This MIB provides information on the IP-RAN traffic
from cell site to aggregation site in the following
situations. In an GSM environment the cell site will
be the Base station Transceiver System(BTS) and the
aggregation site will be the Base Station
Controller(BSC). In the UMTS environment the cell
site will be the B-Node and the aggregation site will
Radio Network Controller(RNC).
There are two typical type backhaul, also know
as longhaul, links. The traditional backhaul
connection consists of a PPP multilink containing two
or more E1 or T1 links or ATM or ATM/IMA. The
alternate backhaul is traffic transported using
IP cloud.
Simple back-to-back configuration
---------------------------------
This setup consists of two devices that
support a limited number of GSM and UMTS links.
They are deployed in pairs and inserted between
the existing BTS device and BSC device.
BTS site BSC site
GSM-Abis GSM-Abis
----|||||||| Backhaul ||||||||----
----| |---------------| |----
----| |---------------| |----
|||||||| ||||||||
RNC B-Node site RNC
UMTS UMTS
----|||||||| Backhaul ||||||||----
----| |---------------| |----
----| |---------------| |----
|||||||| ||||||||
| |
|-----------------------|
Alternate backhaul over
IP cloud
Aggregate node configuration
----------------------------
This configuration consists of one aggregate node
located at BSC site and several devices at BTS
sites. The aggregate device has a seperate backhaul
link to each BTS site.
BTS site BSC site
Aggregate
GSM GSM
----|||||||| Backhaul ||||||||----
----| |---------------| |----
----| |---------------| |----
|||||||| | |
. | | .
. | | .
GSM . | | .
----|||||||| Backhaul | |----
----| |---------------| |----
----| |---------------| |----
|||||||| ||||||||
RNC B-Node
UMTS UMTS
----|||||||| Backhaul ||||||||----
----| |---------------| |----
----| |---------------| |----
|||||||| | |
| Alternate | |
| .... | |
-------. . | |
. IP . | |
. Cloud.-----| |
. . | |
-------. . | |
| ...... | |
| Backhaul | |
UMTS | | |
----|||||||| Backhaul | |----
----| |---------------| |----
----| |---------------| |----
|||||||| ||||||||
Compression
Multiplexing
|
BSC <---------->|||||||| V ||||||||<---------->BTS
. GSM . | |<---->| | . GSM .
. A(bis) . | |<---->| | . A(bis) .
<---------->|||||||| ||||||||<---------->
A A
| |
ShortHaul BackHaul
Multiple E1/T1 Back Haul Links
Entries in these tables cannot be created or deleted
by the network management system. All entries are
created or deleted by the agent.
Shorthaul interfaces support the following protocols.
Protocol ifType
-------- ----------------------------
GSM-Abis propPointToPointSerial(22)
UMTS-iub atm(37)
UMTS/IMA atmSubInterface(134)
aal5(49)
ifType.44 = atmIma(107)
The following list provides the currently allowed
backhaul interfaces types. Additional interfaces
types will be added as they are supported.
ifType
---------------------------
ethernetCsmacd(6)
ppp(23) as Multilink bundle
pppMultilinkBundle(108)
In order to manage the IP-RAN optimization solution, two
key factors must be monitored. The first and most
important is the amount of traffic sent over the backhaul
interface. The second is compression efficiency which has
a direct impact amount of traffic placed backhaul link.
MIB Structure
-------------
The MIB has the following structure.
Shorthaul information tables:
cirbhInfoTable
Shorthaul Alarm Information tables
cirbhGsmAlarmTable
cirbhUmtsConnectionTable
cirbhUmtsAlarmTable
Shorthaul statistics tables
cirbhStatsTable
cirbhErrorsTable(deprecated)
cirbhShortHaulHistoryTable(obsolete)
cirbhCongestionTable
cirbhGsmErrorsTable(replaces cirbhErrorsTable)
cirbhUmtsErrorsTable(replaces cirbhErrorsTable)
Backhaul information tables
cirbhBackHaulTable(obsolete)
Backhaul statistics tables
cirbhBackHaulHistoryTable(obsolete)
cirbhBackHaulStatsTable(obsolete)
cirbhBackHaulStatsHistoryTable(deprecated)
Abbreviations:
A-bis Interface between BSC and BTS
AAL2 ATM Adaptation Layer type 2
AAL5 ATM Adaptation Layer type 5
AIM Advanced Interface Module
AgNode Aggregation Node
ALCAP Access Link Control Application Part
AMR Adaptive Multi-Rate speech codec
ATM Asynchronous Transfer Mode
BCH Broadcast Channel
BSC Base Station Controller.
BTS Base Station Transceiver System
CDF CID Definition Field
CID Channel IDentification
CPCH Common Packet Channel
DCH Dedicated Channel
DSCH Downlink Shared Channel
DTX Discontinuous Transmission (mechanism)
FACH Forward Link Access Channel
GSM Global System for Mobile communications
IMA Inverse Multiplexing for ATM
Iub Node B to RNC interface
OC3 Optical Carrier 3
OSF OffSet Field
LAPD Link Access Protocol on Dm Channel
O&M Operations and Maintenance
MLPPP Multi-Link PPP
MS Mobile Station (Handset)
NBAP Node B Application Part
NNI Network to Network Interface
Node-B Node B
PCH Paging Channel
PVC Permanent Virtual Circuit
RAN Radio Access Network
SVC Switched Virtual Circuit
RACH Random Access Channel
RNC Radio Network Controller
SAR Segment Assembly Reassembly
SDC Traffic Channel
SDH Signaling Channel
SPVC Soft Permanent Virtual Circuit
SSCOP Service Specific Connection Oriented Protocol
STC Signaling Transport Converter
STM-1 Synchronous Transport Module type 1
TRAU Transcoder Unit
UMTS Universal Mobile Telecommunications System
UNI User to Network Interface
USCH Uplink Shared Channel
UTRAN UMTS Terrestrial Radio Access Network
VCI Virtual Channel Identifier
VPI Virtual Path Identifier"
REVISION "201003240000Z"
DESCRIPTION
"The following tables are now obsolete and the
information provided in them can be calculated using
the objects in the cirbhShortHaulBulkTable.
cirbhShortHaulHistoryTable
cirbhBackHaulTable
cirbhBackHaulShortHaulTable
cirbhBackHaulHistoryTable
cirbhBackHaulStatsTable
cirbhBackHaulStatsHistoryTable
The following scalars are no longer used
in implementation of MIB.
cirbhBackHaulStatsInterval
cirbhBackHaulStatsEntries
cirbhBackHaulAcceptableThreshold
cirbhBackHaulWarningThreshold
cirbhBackHaulOverloadedThreshold
cirbhBackHaulUtilInterval
cirbhUtilNotifEnabled
The following notifications are now obsolete
and not supported.
ciscoIpRanBackHaulRcvdUtil
ciscoIpRanBackHaulSentUtil
Changes to Compliance and Conformance Statements
Changed status to obsolete
ciscoIpRanBackHaulMIBCompliance
ciscoIpRanBackHaulMIBComplianceRev1
ciscoIpRanBackHaulMIBComplianceRev2
ciscoIpRanBackHaulShortHaulGroup
ciscoIpRanBackHaulHistoryGroup
ciscoIpRanBackHaulNotifGroup
ciscoIpRanBackHaulHistoryGroupRev2
Added following as active
ciscoIpRanBackHaulMIBComplianceRev3
ciscoIpRanBackHaulHistoryGroupRev3"
REVISION "200705300000Z"
DESCRIPTION
"Added the cirbhInfoOptimizeTraffic object to the
cirbhInfoTable.
Added OBJECT-GROUP ciscoIpRanBackHaulConfigGroupSup3 and
MODULE-COMPLIANCE ciscoIpRanBackHaulMIBComplianceRev2."
REVISION "200608250000Z"
DESCRIPTION
"The following tables, objects and notifications have been
deprecated.
Scalars
cirbhBackHaulStatsInterval
cirbhBackHaulStatsEntries
cirbhBackHaulAcceptableThreshold
cirbhBackHaulWarningThreshold
cirbhBackHaulOverloadedThreshold
cirbhBackHaulUtilInterval
cirbhUtilNotifEnabled
cirbhErrorsTable
cirbhBackHaulTable
cirbhBackHaulShortHaulTable
cirbhBackHaulHistoryTable
cirbhBackHaulStatsTable
cirbhBackHaulStatsHistoryTable
The following tables and objects have been added.
cirbhInfoTable
cirbhInfoAdjectSerialNum
cirbhInfoAdjectVendorType
cirbhInfoBackhaulRxIfIndex
cirbhInfoBackhaulTxIfIndex
cirbhInfoShBulkLastIndex
cirbhGsmErrorsTable
cirbhUmtsErrorsTable
cirbhCongestionTable
cirbhShortHaulBulkTable"
REVISION "200510180000Z"
DESCRIPTION
"Added cirbhUmtsConnectionRootIfIndex object
and cirbhBackHaulShortHaulTable."
REVISION "200509130000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 483 }
ciscoIpRanBackHaulMIBNotifs OBJECT IDENTIFIER
::= { ciscoIpRanBackHaulMIB 0 }
ciscoIpRanBackHaulMIBObjects OBJECT IDENTIFIER
::= { ciscoIpRanBackHaulMIB 1 }
ciscoIpRanBackHaulMIBConform OBJECT IDENTIFIER
::= { ciscoIpRanBackHaulMIB 2 }
cirbhScalars OBJECT IDENTIFIER
::= { ciscoIpRanBackHaulMIBObjects 1 }
cirbhObjects OBJECT IDENTIFIER
::= { ciscoIpRanBackHaulMIBObjects 2 }
cirbhNotifEnables OBJECT IDENTIFIER
::= { ciscoIpRanBackHaulMIBObjects 3 }
cirbhShortHaul OBJECT IDENTIFIER
::= { cirbhObjects 1 }
cirbhShortHaulInfo OBJECT IDENTIFIER
::= { cirbhShortHaul 1 }
cirbhShortHaulAlarmInfo OBJECT IDENTIFIER
::= { cirbhShortHaul 2 }
cirbhShortHaulStats OBJECT IDENTIFIER
::= { cirbhShortHaul 3 }
cirbhBackHaul OBJECT IDENTIFIER
::= { cirbhObjects 2 }
cirbhBackHaulInfo OBJECT IDENTIFIER
::= { cirbhBackHaul 1 }
cirbhBackHaulStats OBJECT IDENTIFIER
::= { cirbhBackHaul 2 }
-- *************************************************************
-- * *
-- * Textual Conventions *
-- * *
-- *************************************************************
CirbhAlarmState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Alarm states of local and remote interfaces.
These states apply to both GSM and UMTS interfaces.
'blue' - Indicates a problem at the remote end. The alarm
generate by the remote interface in the E1/T1 data
stream is sent and no other action is required.
'green' - No alarm.
'red' - Indicates local interface problem.
A-bis:
The interface has not received synchronization
from the GSM device. Device stops transmitting
backhaul samples.
'yellow' - Indicates receive problem in the local device.
The remote device stops transmitting
backhaul data and indicates a blue alarm.
'unavailable' - Indicates the alarms state is not available.
This state only applies to remote and occurs when
peer connection is inactive."
SYNTAX INTEGER {
blue(1),
green(2),
red(3),
yellow(4),
unavailable(5)
}
CirbhBackHaulUtilization ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A percentage representing the average utilization of
backhaul interface."
SYNTAX Integer32 (0..100)
CirbhBackHaulUtilizationState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"BackHaul Utilization State:
'acceptable' - traffic for a specified direction is
at the acceptable level.
'warning' - traffic for a specified direction is
above acceptable level but below the
overloaded level.
'overloaded' - traffic for a specified direction
has reached or exceeds overloaded level"
SYNTAX INTEGER {
acceptable(1),
warning(2),
overloaded(3)
}
CirbhCommpressInterfaceRate ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The traffic rate of data received from GSM or UMTS interface
after data has been compressed. The transmission compressed
interface rate is calculated after data compression and prior
to transmission on backhaul. The receive compression
interface rate is calculated after data is received and prior
to decompression."
SYNTAX Unsigned32 (0..4294967295)
CirbhConnectGsmState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The state of the GSM connection:
'connected' - The device is monitoring local and
remote alarm status.
'disconnected' - The system ignores the local alarm
status. The local transmitter on the
short-haul is disabled. Capability
messages are transmitted to the remote
describing the provisioning. The system
stays disconnected until the remote
capabilities are known and the peer
state is transitioned to connected.
'sendConnect' - One or more attempts have been made to
connect to remote peer.
'recConnect' - The local-peer has received a connect
request from the remote-peer.
'connectedRej' - Connection was rejected.
'ackConnect' - The initial connect request was sent
and acknowledged by remote-peer. The
local-peer is now waiting for a connect
request from the remote-peer.
'connectedCheck' - The local-peer has reason to believe its
remote-peer has failed. Additional tests
are being processed to verify peer's
state."
SYNTAX INTEGER {
connected(1),
disconnected(2),
sendConnect(3),
recConnect(4),
connectedRej(5),
ackConnect(6),
connectedCheck(7)
}
CirbhConnectUmtsState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The state of the UMTS connection:
'init' - The connection is starting initialization
process.
'starting' - The shorthaul interface is administratively
active but the backhaul interface is down.
'closed' - The backhaul interface is active but
shorthaul is administratively closed.
'stopped' - Unable to connect to peer in specified time
interval. Additional attempts will be tried
based on peer request or restart timers.
'closing' - Connection closed by administration
request.
'stopping' - Connection shutdown by peer's Term-Request.
Will transition to stopped state.
'connectSent' - Connection request sent to peer.
'ackReceived' - Connection request sent and acknowledgement
has been received from peer. Now waiting
for peer's connection request.
'ackSent' - Connection request received and
acknowledgement has been sent to peer.
Connection request sent and waiting for
peer's acknowledgement.
'open' - Connection open and available for traffic."
SYNTAX INTEGER {
init(1),
starting(2),
closed(3),
stopped(4),
closing(5),
stopping(6),
connectSent(7),
ackReceived(8),
ackSent(9),
open(10)
}
CirbhHistoryIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The system maintains a system wide counter that
is incremented once a second. All tables that store
historical informations should use the provided integer
to that data from different tables can be easily compared
and referenced. The implementations should ensure that
the counters will not wrap and is only reset when device
is reloaded."
SYNTAX Unsigned32 (1..4294967295)
CirbhProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The protocol used between BSC and BTS.
'undefined' : Protocol not defined.
'gsmAbis' : Global System for Mobile communications
A-bis Interface between BSC and BTS.
'umtsIub' : Universal Mobile Telecommunications System
Node B to RNC interface."
SYNTAX INTEGER {
undefined(1),
gsmAbis(2),
umtsIub(3)
}
CirbhRawInterfaceRate ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The rate of traffic, in bits per second, on an interface in
a particular direction prior to optimization for the
following flows:
Traffic received on UMTS or GSM-Abis interface
prior to compression and placement on backhaul
interface(Multilink).
Traffic received from backhaul
interface(Multilink) after decompression prior to
transmittion on UMTS or GSM-Abis interface."
SYNTAX Unsigned32 (0..4294967295)
CirbhRedundancyState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Redundancy State of an interface. Used to
indicate which device was current owner of
interface.
'active' - Active owner of interface.
'standby' - Standby owner of interface."
SYNTAX INTEGER {
active(1),
standby(2)
}
CirbhShortHaulUtilization ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A percentage representing the average load over one
second as a percent of E1 or T1."
SYNTAX Integer32 (0..255)
CirbhTrafficDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Direction of traffic on an interface."
SYNTAX INTEGER {
receive(1),
transmit(2)
}
CirbhTrafficType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The types of traffic on backhaul interface.
'all' - All types of traffic
'gsm' - Only GSM based traffic
'umts' - Only UMTS based traffic"
SYNTAX INTEGER {
all(1),
gsm(2),
umts(3)
}
-- *************************************************************
-- * *
-- * Scalars *
-- * *
-- *************************************************************
cirbhSnmpTrafficMode OBJECT-TYPE
SYNTAX INTEGER {
undefined(1),
inBand(2),
outOfBand(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the mode of SNMP traffic for this
device in relationship to connectivity to network management
station. This will be used to define default behavior for
the device based on the on available bandwidth for
management.
'undefined' : Traffic mode is not defined.
'inBand' : SNMP traffic uses same physical interfaces as
voice traffic.
'outOfBand' : SNMP traffic does not use same physical
interfaces as voice traffic."
::= { cirbhScalars 1 }
cirbhLocation OBJECT-TYPE
SYNTAX INTEGER {
undefined(1),
aggSite(2),
cellSite(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object provides information on location of
the device to aid in topology display.
'undefined' : not defined.
'aggSite' : Located at Base Station Controller or
or Radio Network Controller site.
'cellSite' : Located at Base Station Transceiver System
or Node B site."
::= { cirbhScalars 2 }
cirbhBackHaulStatsInterval OBJECT-TYPE
SYNTAX Unsigned32 (60..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The length of the interval used to collect statistics in the
cirbhBackHaulStatsTable."
DEFVAL { 900 }
::= { cirbhScalars 3 }
cirbhBackHaulStatsEntries OBJECT-TYPE
SYNTAX Unsigned32 (4..100)
UNITS "entries"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The maximum number of entries in the cirbhBackHaulStatsTable
table."
DEFVAL { 100 }
::= { cirbhScalars 4 }
cirbhBackHaulAcceptableThreshold OBJECT-TYPE
SYNTAX Unsigned32 (20..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object is used to specify a level of
traffic below which the instances of the
cirbhBackHaulRcvdUtilState and cirbhBackHaulSentUtilState
objects are marked as 'acceptable'. All changes to this
threshold will take effect at the end of the current
interval. The value for this object must be less than
the values specified by cirbhBackHaulOverloadedThreshold
and cirbhBackHaulWarningThreshold objects."
DEFVAL { 60 }
::= { cirbhScalars 5 }
cirbhBackHaulWarningThreshold OBJECT-TYPE
SYNTAX Unsigned32 (30..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object is used to specify a level of
traffic were the instances of the
cirbhBackHaulRcvdUtilState and cirbhBackHaulSentUtilState
objects are marked as 'warning'. All changes to this
threshold will take effect at the end of the current
interval. The value for this object must be greater than
the value specified for the cirbhBackHaulAcceptableThreshold
object. Also, the value for this object must be less than or
equal to value of the cirbhBackHaulOverloadedThreshold
object."
DEFVAL { 70 }
::= { cirbhScalars 6 }
cirbhBackHaulOverloadedThreshold OBJECT-TYPE
SYNTAX Unsigned32 (40..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object is used to specify a level of
traffic were the instances of the
cirbhBackHaulRcvdUtilState and cirbhBackHaulSentUtilState
objects are marked as 'overloaded'. Changes to this
threshold will take effect at the end of the current
interval. The value for this object must be greater than
the value specified for the cirbhBackHaulAcceptableThreshold
object. Also, the value for this object must be greater than
or equal to value of the cirbhBackHaulWarningThreshold
object.
This object will be used to determine the state of the
cirbhBackHaulRcvdUtilState and cirbhBackHaulSentUtilState
objects."
DEFVAL { 80 }
::= { cirbhScalars 7 }
cirbhBackHaulUtilInterval OBJECT-TYPE
SYNTAX Unsigned32 (0 | 60..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The length of the interval used to suppress
generation of the ciscoIpRanBackHaulRcvdUtil
and ciscoIpRanBackHaulSentUtil notifications.
Notification will not be suppressed when
zero value is specified."
DEFVAL { 0 }
::= { cirbhScalars 8 }
-- *************************************************************
-- * *
-- * Information Table *
-- * *
-- *************************************************************
cirbhInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CirbhInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information on interface used to
establish shorthaul connection to BTS or BSC or node
B site."
::= { cirbhShortHaulInfo 1 }
cirbhInfoTableEntry OBJECT-TYPE
SYNTAX CirbhInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry describes the information used to route
GSM and UMTS packets across backhaul for a single
GSM or UMTS link."
INDEX { ifIndex }
::= { cirbhInfoTable 1 }
CirbhInfoTableEntry ::= SEQUENCE {
cirbhInfoProtocol CirbhProtocol,
cirbhInfoLocalAddrType InetAddressType,
cirbhInfoLocalAddr InetAddress,
cirbhInfoLocalPortNumber InetPortNumber,
cirbhInfoRemoteAddrType InetAddressType,
cirbhInfoRemoteAddr InetAddress,
cirbhInfoRemotePortNumber InetPortNumber,
cirbhInfoAdjectSerialNum SnmpAdminString,
cirbhInfoAdjectVendorType AutonomousType,
cirbhInfoBackhaulRxIfIndex InterfaceIndexOrZero,
cirbhInfoBackhaulTxIfIndex InterfaceIndexOrZero,
cirbhInfoShBulkLastIndex CirbhHistoryIndex,
cirbhInfoOptimizeTraffic TruthValue
}
cirbhInfoProtocol OBJECT-TYPE
SYNTAX CirbhProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Protocol used to indicate type of shorthaul."
REFERENCE
"GSM-Abis - 3GPP TS 08.60 V8.2.1 (Rel99) GSM A-bis
specification for FR, EFR and AMR
UMTS-Iub - 3GPP TS 25.302"
::= { cirbhInfoTableEntry 1 }
cirbhInfoLocalAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of address specified in the corresponding instance
of cirbhConfigLocalIpAddr object."
::= { cirbhInfoTableEntry 2 }
cirbhInfoLocalAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local address used to route traffic across backhaul."
::= { cirbhInfoTableEntry 3 }
cirbhInfoLocalPortNumber OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local port number used to distinguish traffic from this
interface when transported over backhaul connection."
::= { cirbhInfoTableEntry 4 }
cirbhInfoRemoteAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of address in the in the corresponding instance of
the cirbhInfoRemoteAddr object."
::= { cirbhInfoTableEntry 5 }
cirbhInfoRemoteAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote IP address used to route traffic across backhaul."
::= { cirbhInfoTableEntry 6 }
cirbhInfoRemotePortNumber OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote port number used to distinguish traffic
from this interface when transported over backhaul
connection."
::= { cirbhInfoTableEntry 7 }
cirbhInfoAdjectSerialNum OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the serial number of the adjacent
device supporting the other side of this shorthaul. This object
contains the same value as the corresponding
entPhysicalSerialNum object on the adjacent device. The type of
object like chassis or module is provided by the
cirbhInfoAdjectVendorType object."
::= { cirbhInfoTableEntry 8 }
cirbhInfoAdjectVendorType OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the vendor type of the adjacent
device supporting other end of this shorthaul. This
objectcontains the same value as the corresponding
entPhysicalVendorType object on the adjacent device."
::= { cirbhInfoTableEntry 9 }
cirbhInfoBackhaulRxIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the ifIndex of the interface
used to receive traffic from destination."
::= { cirbhInfoTableEntry 10 }
cirbhInfoBackhaulTxIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the ifIndex of the interface
used to sent traffic to destination."
::= { cirbhInfoTableEntry 11 }
cirbhInfoShBulkLastIndex OBJECT-TYPE
SYNTAX CirbhHistoryIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The latest value of the cirbhShortHaulBulkHistory object
from the cirbhShortHaulBulkHistory table."
::= { cirbhInfoTableEntry 12 }
cirbhInfoOptimizeTraffic OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicate whether the traffic received and sent for
this shorthaul interface is optimized."
::= { cirbhInfoTableEntry 13 }
-- *************************************************************
-- * *
-- * GSM Alarm information *
-- * *
-- *************************************************************
cirbhGsmAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF CirbhGsmAlarmTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides alarm information for GSM-Abis
interfaces."
::= { cirbhShortHaulAlarmInfo 1 }
cirbhGsmAlarmTableEntry OBJECT-TYPE
SYNTAX CirbhGsmAlarmTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents the set of alarms that apply to
GSM interface."
INDEX { ifIndex }
::= { cirbhGsmAlarmTable 1 }
CirbhGsmAlarmTableEntry ::= SEQUENCE {
cirbhGsmAlarmConnectState CirbhConnectGsmState,
cirbhGsmAlarmLocalState CirbhAlarmState,
cirbhGsmAlarmRemoteState CirbhAlarmState,
cirbhGsmAlarmRedundancyState CirbhRedundancyState
}
cirbhGsmAlarmConnectState OBJECT-TYPE
SYNTAX CirbhConnectGsmState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the connection for GSM interface."
::= { cirbhGsmAlarmTableEntry 1 }
cirbhGsmAlarmLocalState OBJECT-TYPE
SYNTAX CirbhAlarmState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local alarm state."
::= { cirbhGsmAlarmTableEntry 2 }
cirbhGsmAlarmRemoteState OBJECT-TYPE
SYNTAX CirbhAlarmState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote alarm state."
::= { cirbhGsmAlarmTableEntry 3 }
cirbhGsmAlarmRedundancyState OBJECT-TYPE
SYNTAX CirbhRedundancyState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The redundancy state of the interface"
::= { cirbhGsmAlarmTableEntry 4 }
-- *************************************************************
-- * *
-- * UMTS Connection information *
-- * *
-- *************************************************************
cirbhUmtsConnectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF CirbhUmtsConnectionTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information associated with
UMTS connection between BTS and BSC."
::= { cirbhShortHaulAlarmInfo 2 }
cirbhUmtsConnectionTableEntry OBJECT-TYPE
SYNTAX CirbhUmtsConnectionTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each Entry represents the set of alarms that apply to
UMTS interfaces."
INDEX { ifIndex }
::= { cirbhUmtsConnectionTable 1 }
CirbhUmtsConnectionTableEntry ::= SEQUENCE {
cirbhUmtsConnectionState CirbhConnectUmtsState,
cirbhUmtsConnectionRedundState CirbhRedundancyState,
cirbhUmtsConnectionRootIfIndex InterfaceIndexOrZero
}
cirbhUmtsConnectionState OBJECT-TYPE
SYNTAX CirbhConnectUmtsState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the connection between the UMTS
interfaces."
::= { cirbhUmtsConnectionTableEntry 1 }
cirbhUmtsConnectionRedundState OBJECT-TYPE
SYNTAX CirbhRedundancyState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The redundancy state of the interface."
::= { cirbhUmtsConnectionTableEntry 2 }
cirbhUmtsConnectionRootIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The root interface used to transport
and receive UMTS traffic as follows.
ATM:
ATM0/0.0-aal5 layer -> ATM0/0-atm layer.
IMA
ATM0/IMA0.1-aal5 layer -> ATM0/IMA0"
::= { cirbhUmtsConnectionTableEntry 3 }
-- *************************************************************
-- * *
-- * UMTS Alarm information *
-- * *
-- *************************************************************
cirbhUmtsAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF CirbhUmtsAlarmTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information on alarm states for
UMTS-ATM interfaces."
::= { cirbhShortHaulAlarmInfo 3 }
cirbhUmtsAlarmTableEntry OBJECT-TYPE
SYNTAX CirbhUmtsAlarmTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry provides information about the alarms for
each ATM interface used to configure the shorthaul
UMTS interface."
INDEX { ifIndex }
::= { cirbhUmtsAlarmTable 1 }
CirbhUmtsAlarmTableEntry ::= SEQUENCE {
cirbhUmtsAlarmRxLocalState CirbhAlarmState,
cirbhUmtsAlarmRxRemoteState CirbhAlarmState,
cirbhUmtsAlarmTxLocalState CirbhAlarmState,
cirbhUmtsAlarmTxRemoteState CirbhAlarmState
}
cirbhUmtsAlarmRxLocalState OBJECT-TYPE
SYNTAX CirbhAlarmState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local receive alarm state."
::= { cirbhUmtsAlarmTableEntry 1 }
cirbhUmtsAlarmRxRemoteState OBJECT-TYPE
SYNTAX CirbhAlarmState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote receive alarm state."
::= { cirbhUmtsAlarmTableEntry 2 }
cirbhUmtsAlarmTxLocalState OBJECT-TYPE
SYNTAX CirbhAlarmState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local transmit alarm state."
::= { cirbhUmtsAlarmTableEntry 3 }
cirbhUmtsAlarmTxRemoteState OBJECT-TYPE
SYNTAX CirbhAlarmState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote transmit alarm state."
::= { cirbhUmtsAlarmTableEntry 4 }
-- *************************************************************
-- * *
-- * Statistics *
-- * *
-- *************************************************************
cirbhStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CirbhStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides measurements on bytes and
packets sent or received on a per interface basis.
It is important to note that this table shares the
same index with the cirbhInfoTable table the ifIndex
can be used to associate information from both tables."
::= { cirbhShortHaulStats 1 }
cirbhStatsTableEntry OBJECT-TYPE
SYNTAX CirbhStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry provides measurements on shorthaul
interfaces to allow compression efficency to be
calculated."
INDEX { ifIndex }
::= { cirbhStatsTable 1 }
CirbhStatsTableEntry ::= SEQUENCE {
cirbhStatsRcvdSamples Counter32,
cirbhStatsSentSamples Counter32,
cirbhStatsRcvdBackHaulPackets Counter32,
cirbhStatsSentBackHaulPackets Counter32,
cirbhStatsRcvdBackHaulBytes Counter32,
cirbhStatsSentBackHaulBytes Counter32
}
cirbhStatsRcvdSamples OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For GSM-Abis interfaces, the count of samples received on
interface. For UMTS interfaces, the number of packets received
on interface."
::= { cirbhStatsTableEntry 1 }
cirbhStatsSentSamples OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For GSM-Abis interfaces, the count of samples sent on
interface. For UMTS interfaces, the number of packets sent
on this interface."
::= { cirbhStatsTableEntry 2 }
cirbhStatsRcvdBackHaulPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of packets received from backhaul that contained
data for this interface."
::= { cirbhStatsTableEntry 3 }
cirbhStatsSentBackHaulPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of packets transmitted on backhaul that contained
data from this interface."
::= { cirbhStatsTableEntry 4 }
cirbhStatsRcvdBackHaulBytes OBJECT-TYPE
SYNTAX Counter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of bytes received from backhaul that contained
data for this interface."
::= { cirbhStatsTableEntry 5 }
cirbhStatsSentBackHaulBytes OBJECT-TYPE
SYNTAX Counter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of bytes transmitted on backhaul that contained
data from this interface."
::= { cirbhStatsTableEntry 6 }
-- *************************************************************
-- * *
-- * Error information *
-- * *
-- *************************************************************
cirbhErrorsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CirbhErrorsTableEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table provides information on the errors that
can be encountered during the compression and
decompression of UMTS and GSM-Abis traffic.
UMTS
-------------------
|
GSM Links --------
--------------| | IP based Multi-link(backhaul)
--------------| |-----------------------------
--------------| |-----------------------------
--------"
::= { cirbhShortHaulStats 2 }
cirbhErrorsTableEntry OBJECT-TYPE
SYNTAX CirbhErrorsTableEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Each entry provides account of various types of
errors encountered on GSM and UMTS interfaces."
INDEX { ifIndex }
::= { cirbhErrorsTable 1 }
CirbhErrorsTableEntry ::= SEQUENCE {
cirbhErrorsBhPeerNotReadyDrops Counter32,
cirbhErrorsBhPeerNotActiveDrops Counter32,
cirbhErrorsBhInvalidPackets Counter32,
cirbhErrorsBhLostRcvdPackets Counter32,
cirbhErrorsBhLostSentPackets Counter32,
cirbhErrorsBhMissedPackets Counter32,
cirbhErrorsBhMissedLatePackets Counter32,
cirbhErrorsBhMissedLostPackets Counter32,
cirbhErrorsBhMissedNoMemPackets Counter32,
cirbhErrorsBhMissedResetPackets Counter32,
cirbhErrorsDecompFailures Counter32,
cirbhErrorsCompFailures Counter32,
cirbhErrorsCompNoPacketFailures Counter32,
cirbhErrorsCompNoIntFailures Counter32,
cirbhErrorsCompIntDownFailures Counter32,
cirbhErrorsCompEncapFailures Counter32,
cirbhErrorsCompQosDrops Counter32
}
cirbhErrorsBhPeerNotReadyDrops OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The count of packets dropped on backhaul because peer was
not ready."
::= { cirbhErrorsTableEntry 1 }
cirbhErrorsBhPeerNotActiveDrops OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The count of packets dropped on backhaul because peer was
reachable but not in active state."
::= { cirbhErrorsTableEntry 2 }
cirbhErrorsBhInvalidPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of backhaul packets that were received and dropped
because they contained invalid information."
::= { cirbhErrorsTableEntry 3 }
cirbhErrorsBhLostRcvdPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of backhaul packets expected to be received but
never arrived."
::= { cirbhErrorsTableEntry 4 }
cirbhErrorsBhLostSentPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of backhaul packets sent but never were
received by peer."
::= { cirbhErrorsTableEntry 5 }
cirbhErrorsBhMissedPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The value of this object is the sum total of the values of
the corresponding instances of the following objects:
cirbhErrorsBhMissedLatePackets
cirbhErrorsBhMissedLostPackets
cirbhErrorsBhMissedNoMemPackets
cirbhErrorsBhMissedResetPackets"
::= { cirbhErrorsTableEntry 6 }
cirbhErrorsBhMissedLatePackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of packets missed on backhaul because they
arrived past the allowed time frame."
::= { cirbhErrorsTableEntry 7 }
cirbhErrorsBhMissedLostPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of packets missed on backhaul because they
were lost on backhaul."
::= { cirbhErrorsTableEntry 8 }
cirbhErrorsBhMissedNoMemPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of packets missed on backhaul for lack of
available memory to allocate packet."
::= { cirbhErrorsTableEntry 9 }
cirbhErrorsBhMissedResetPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of packets missed on backhaul because the of a
reset event."
::= { cirbhErrorsTableEntry 10 }
cirbhErrorsDecompFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "failures"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of times information contained in
packet could not be decompressed."
::= { cirbhErrorsTableEntry 11 }
cirbhErrorsCompFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "failures"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of times the information contained in the
packet could not be compressed. This counter is
incremented for all types of compression errors."
::= { cirbhErrorsTableEntry 12 }
cirbhErrorsCompNoPacketFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "failures"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of times compression failed because
packet was unavailable."
::= { cirbhErrorsTableEntry 13 }
cirbhErrorsCompNoIntFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "failures"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of times compression failed because
route to peer was not available."
::= { cirbhErrorsTableEntry 14 }
cirbhErrorsCompIntDownFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "failures"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of times compression failed because
interface was down."
::= { cirbhErrorsTableEntry 15 }
cirbhErrorsCompEncapFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "failures"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of times compression failed because of
encapsulation errors."
::= { cirbhErrorsTableEntry 16 }
cirbhErrorsCompQosDrops OBJECT-TYPE
SYNTAX Counter32
UNITS "drops"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of times compression failed because
of quality of service errors or traffic load."
::= { cirbhErrorsTableEntry 17 }
-- *************************************************************
-- *
-- * ShortHaul traffic history
-- *
-- *************************************************************
cirbhShortHaulHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CirbhShortHaulHistoryTableEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This table provides historical information on the amount of
backhaul traffic contributed by each interface."
::= { cirbhShortHaulStats 3 }
cirbhShortHaulHistoryTableEntry OBJECT-TYPE
SYNTAX CirbhShortHaulHistoryTableEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Each entry represents the average traffic for last second.
Each entry provides information on traffic rates for raw
and compressed data."
INDEX {
ifIndex,
cirbhShortHaulHistory
}
::= { cirbhShortHaulHistoryTable 1 }
CirbhShortHaulHistoryTableEntry ::= SEQUENCE {
cirbhShortHaulHistory CirbhHistoryIndex,
cirbhShortHaulRcvdRate CirbhRawInterfaceRate,
cirbhShortHaulSentRate CirbhRawInterfaceRate,
cirbhShortHaulRcvdCompressRate CirbhCommpressInterfaceRate,
cirbhShortHaulSentCompressRate CirbhCommpressInterfaceRate,
cirbhShortHaulTimeStamp TimeStamp,
cirbhShortHaulRcvdUtilization CirbhShortHaulUtilization,
cirbhShortHaulSentUtilization CirbhShortHaulUtilization
}
cirbhShortHaulHistory OBJECT-TYPE
SYNTAX CirbhHistoryIndex
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An index used to access history of
cirbhShortHaulHistoryTable objects."
::= { cirbhShortHaulHistoryTableEntry 1 }
cirbhShortHaulRcvdRate OBJECT-TYPE
SYNTAX CirbhRawInterfaceRate
UNITS "bytes/second"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The rate of traffic received from this interface to be sent
on backhaul prior to compression."
::= { cirbhShortHaulHistoryTableEntry 2 }
cirbhShortHaulSentRate OBJECT-TYPE
SYNTAX CirbhRawInterfaceRate
UNITS "bytes/second"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The rate of traffic sent out from this interface after
traffic was decompressed."
::= { cirbhShortHaulHistoryTableEntry 3 }
cirbhShortHaulRcvdCompressRate OBJECT-TYPE
SYNTAX CirbhCommpressInterfaceRate
UNITS "bytes/second"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The rate of traffic received into this interface to be sent
on backhaul after compression."
::= { cirbhShortHaulHistoryTableEntry 4 }
cirbhShortHaulSentCompressRate OBJECT-TYPE
SYNTAX CirbhCommpressInterfaceRate
UNITS "bytes/second"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The rate of traffic received from backhaul and prior to
decompression."
::= { cirbhShortHaulHistoryTableEntry 5 }
cirbhShortHaulTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Time when sample was collected."
::= { cirbhShortHaulHistoryTableEntry 6 }
cirbhShortHaulRcvdUtilization OBJECT-TYPE
SYNTAX CirbhShortHaulUtilization
UNITS "percent of DS load"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Amount of traffic that was receive from backhaul before
decompression express as load on E1 or T1."
::= { cirbhShortHaulHistoryTableEntry 7 }
cirbhShortHaulSentUtilization OBJECT-TYPE
SYNTAX CirbhShortHaulUtilization
UNITS "percent of DS load"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Amount of traffic that was send on after
compression express as load on E1 or T1."
::= { cirbhShortHaulHistoryTableEntry 8 }
-- *************************************************************
-- * *
-- * Congestion information *
-- * *
-- *************************************************************
cirbhCongestionTable OBJECT-TYPE
SYNTAX SEQUENCE OF CirbhCongestionTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information on congestion
mechanism for shorthaul interfaces."
::= { cirbhShortHaulStats 4 }
cirbhCongestionTableEntry OBJECT-TYPE
SYNTAX CirbhCongestionTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents single shorthaul interface."
INDEX { ifIndex }
::= { cirbhCongestionTable 1 }
CirbhCongestionTableEntry ::= SEQUENCE {
cirbhCongestionEnabled TruthValue,
cirbhCongestionDrops Counter32,
cirbhCongestionDroppedBytes Counter32,
cirbhCongestionEvents Counter32,
cirbhCongestionActive TruthValue,
cirbhCongestionDuration Counter32
}
cirbhCongestionEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates congestion mechanisms have been
enabled for shorthaul interface."
::= { cirbhCongestionTableEntry 1 }
cirbhCongestionDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provide the number packets or cells
that were dropped due to congestion. When the
cirbhInfoProtocol is 'gsmAbis' object indicates the
number of packets dropped. When the cirbhInfoProtocol
is 'umtsIub' object indicates the number of cells
dropped."
::= { cirbhCongestionTableEntry 2 }
cirbhCongestionDroppedBytes OBJECT-TYPE
SYNTAX Counter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes dropped due to congestion
control mechanisms."
::= { cirbhCongestionTableEntry 3 }
cirbhCongestionEvents OBJECT-TYPE
SYNTAX Counter32
UNITS "occurences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times congestion mechanism was engaged."
::= { cirbhCongestionTableEntry 4 }
cirbhCongestionActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether congestion mechanism is
active."
::= { cirbhCongestionTableEntry 5 }
cirbhCongestionDuration OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides number of seconds interface was
congested."
::= { cirbhCongestionTableEntry 6 }
-- *************************************************************
-- * *
-- * GSM Shorthaul Error information *
-- * *
-- *************************************************************
cirbhGsmErrorsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CirbhGsmErrorsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information on the errors that
can be encountered during the compression and
decompression of GSM-Abis traffic."
::= { cirbhShortHaulStats 5 }
cirbhGsmErrorsTableEntry OBJECT-TYPE
SYNTAX CirbhGsmErrorsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents single shorthaul interface."
INDEX { ifIndex }
::= { cirbhGsmErrorsTable 1 }
CirbhGsmErrorsTableEntry ::= SEQUENCE {
cirbhGsmErrorsPeerNotReadyDrops Counter32,
cirbhGsmErrorsPeerNotActiveDrops Counter32,
cirbhGsmErrorsInvalidPackets Counter32,
cirbhGsmErrorsLostRcvdPackets Counter32,
cirbhGsmErrorsLostSentPackets Counter32,
cirbhGsmErrorsMissedPackets Counter32,
cirbhGsmErrorsMissedLatePackets Counter32,
cirbhGsmErrorsMissedLostPackets Counter32,
cirbhGsmErrorsMissedNoMemPackets Counter32,
cirbhGsmErrorsMissedResetPackets Counter32,
cirbhGsmErrorsDecompFailures Counter32,
cirbhGsmErrorsCompFailures Counter32,
cirbhGsmErrorsCompNoPacketFailures Counter32,
cirbhGsmErrorsCompNoIntFailures Counter32,
cirbhGsmErrorsCompIntDownFailures Counter32,
cirbhGsmErrorsCompEncapFailures Counter32,
cirbhGsmErrorsCompQosDrops Counter32,
cirbhGsmErrorsFastSendFailures Counter32,
cirbhGsmErrorsTxPacketFailures Counter32,
cirbhGsmErrorsTxNoBuffers Counter32,
cirbhGsmErrorsTxResets Counter32,
cirbhGsmErrorsOverruns Counter32,
cirbhGsmErrorsInterruptFailures Counter32,
cirbhGsmErrorsLateArrivals Counter32,
cirbhGsmErrorsEarlyArrivals Counter32
}
cirbhGsmErrorsPeerNotReadyDrops OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of packets dropped on backhaul because peer was
not ready."
::= { cirbhGsmErrorsTableEntry 1 }
cirbhGsmErrorsPeerNotActiveDrops OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of packets dropped on backhaul because peer was
reachable but not in active state."
::= { cirbhGsmErrorsTableEntry 2 }
cirbhGsmErrorsInvalidPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of backhaul packets that were received and dropped
because they contained invalid information."
::= { cirbhGsmErrorsTableEntry 3 }
cirbhGsmErrorsLostRcvdPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of backhaul packets expected to be received but
never arrived."
::= { cirbhGsmErrorsTableEntry 4 }
cirbhGsmErrorsLostSentPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of backhaul packets sent but never were
received by peer."
::= { cirbhGsmErrorsTableEntry 5 }
cirbhGsmErrorsMissedPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the sum total of the values of
the corresponding instances of the following objects:
cirbhGsmErrorsMissedLatePackets
cirbhGsmErrorsMissedLostPackets
cirbhGsmErrorsMissedNoMemPackets
cirbhGsmErrorsMissedResetPackets"
::= { cirbhGsmErrorsTableEntry 6 }
cirbhGsmErrorsMissedLatePackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets missed on backhaul because they
arrived past the allowed time frame."
::= { cirbhGsmErrorsTableEntry 7 }
cirbhGsmErrorsMissedLostPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets missed on backhaul because they
were lost on backhaul."
::= { cirbhGsmErrorsTableEntry 8 }
cirbhGsmErrorsMissedNoMemPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets missed on backhaul for lack of
available memory to allocate packet."
::= { cirbhGsmErrorsTableEntry 9 }
cirbhGsmErrorsMissedResetPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets missed on backhaul because the of a
reset event."
::= { cirbhGsmErrorsTableEntry 10 }
cirbhGsmErrorsDecompFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "failures"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times information contained in
packet could not be decompressed."
::= { cirbhGsmErrorsTableEntry 11 }
cirbhGsmErrorsCompFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "failures"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the information contained in the
packet could not be compressed."
::= { cirbhGsmErrorsTableEntry 12 }
cirbhGsmErrorsCompNoPacketFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "failures"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times compression failed because
packet was unavailable."
::= { cirbhGsmErrorsTableEntry 13 }
cirbhGsmErrorsCompNoIntFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "failures"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times compression failed because
route to peer was not available."
::= { cirbhGsmErrorsTableEntry 14 }
cirbhGsmErrorsCompIntDownFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "failures"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times compression failed because
interface was down."
::= { cirbhGsmErrorsTableEntry 15 }
cirbhGsmErrorsCompEncapFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "failures"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times compression failed because of
encapsulation errors."
::= { cirbhGsmErrorsTableEntry 16 }
cirbhGsmErrorsCompQosDrops OBJECT-TYPE
SYNTAX Counter32
UNITS "drops"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times compression failed because
of quality of service errors or traffic load."
::= { cirbhGsmErrorsTableEntry 17 }
cirbhGsmErrorsFastSendFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "occurences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fast send failures."
::= { cirbhGsmErrorsTableEntry 18 }
cirbhGsmErrorsTxPacketFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "occurences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unable to transmit GSM packet."
::= { cirbhGsmErrorsTableEntry 19 }
cirbhGsmErrorsTxNoBuffers OBJECT-TYPE
SYNTAX Counter32
UNITS "occurences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unable to allocate buffer for transmission."
::= { cirbhGsmErrorsTableEntry 20 }
cirbhGsmErrorsTxResets OBJECT-TYPE
SYNTAX Counter32
UNITS "occurences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmission interface resets."
::= { cirbhGsmErrorsTableEntry 21 }
cirbhGsmErrorsOverruns OBJECT-TYPE
SYNTAX Counter32
UNITS "occurences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packet was missed because backhaul jitter buffer was
ran out of available space."
::= { cirbhGsmErrorsTableEntry 22 }
cirbhGsmErrorsInterruptFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "Failures"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packet was lost because of interrupt failure."
::= { cirbhGsmErrorsTableEntry 23 }
cirbhGsmErrorsLateArrivals OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of GSM packets that arrived later than the allowed
time."
::= { cirbhGsmErrorsTableEntry 24 }
cirbhGsmErrorsEarlyArrivals OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of GSM packets that arrived earlier than the
allowed time."
::= { cirbhGsmErrorsTableEntry 25 }
-- *************************************************************
-- * *
-- * UMTS Shorthaul Error information *
-- * *
-- *************************************************************
cirbhUmtsErrorsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CirbhUmtsErrorsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information on the errors that
can be encountered during the compression and
decompression of UMTS-Iub traffic."
::= { cirbhShortHaulStats 6 }
cirbhUmtsErrorsTableEntry OBJECT-TYPE
SYNTAX CirbhUmtsErrorsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents single shorthaul interface."
INDEX { ifIndex }
::= { cirbhUmtsErrorsTable 1 }
CirbhUmtsErrorsTableEntry ::= SEQUENCE {
cirbhUmtsErrorsPeerNotReadyDrops Counter32,
cirbhUmtsErrorsInvalidPackets Counter32,
cirbhUmtsErrorsDecompFailures Counter32,
cirbhUmtsErrorsCompFailures Counter32,
cirbhUmtsErrorsCompNoPacketFailures Counter32,
cirbhUmtsErrorsCompNoIntFailures Counter32,
cirbhUmtsErrorsCompIntDownFailures Counter32,
cirbhUmtsErrorsCompEncapFailures Counter32,
cirbhUmtsErrorsCompQosDrops Counter32,
cirbhUmtsErrorsShorthaulPakFailures Counter32,
cirbhUmtsErrorsUmtsEncapFailures Counter32,
cirbhUmtsErrorsLocalPvcDrops Counter32,
cirbhUmtsErrorsRemotePvcDrops Counter32,
cirbhUmtsErrorsBackhaulDrops Counter32
}
cirbhUmtsErrorsPeerNotReadyDrops OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of packets dropped on backhaul because peer was
not ready."
::= { cirbhUmtsErrorsTableEntry 1 }
cirbhUmtsErrorsInvalidPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of backhaul packets that were received and dropped
because they contained invalid information."
::= { cirbhUmtsErrorsTableEntry 2 }
cirbhUmtsErrorsDecompFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "failures"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times information contained in
packet could not be decompressed."
::= { cirbhUmtsErrorsTableEntry 3 }
cirbhUmtsErrorsCompFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "failures"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the information contained int the
packet could not be compressed."
::= { cirbhUmtsErrorsTableEntry 4 }
cirbhUmtsErrorsCompNoPacketFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "failures"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times compression failed because
packet was unavailable."
::= { cirbhUmtsErrorsTableEntry 5 }
cirbhUmtsErrorsCompNoIntFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "failures"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times compression failed because
route to peer was not available."
::= { cirbhUmtsErrorsTableEntry 6 }
cirbhUmtsErrorsCompIntDownFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "failures"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times compression failed because
interface was down."
::= { cirbhUmtsErrorsTableEntry 7 }
cirbhUmtsErrorsCompEncapFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "failures"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times compression failed because of
encapsulation errors."
::= { cirbhUmtsErrorsTableEntry 8 }
cirbhUmtsErrorsCompQosDrops OBJECT-TYPE
SYNTAX Counter32
UNITS "drops"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times compression failed because
of quality of service errors or traffic load."
::= { cirbhUmtsErrorsTableEntry 9 }
cirbhUmtsErrorsShorthaulPakFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "occurrences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unable to allocate packet used to send data on shorthaul
interface."
::= { cirbhUmtsErrorsTableEntry 10 }
cirbhUmtsErrorsUmtsEncapFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "occurences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UMTS encapsulate failures."
::= { cirbhUmtsErrorsTableEntry 11 }
cirbhUmtsErrorsLocalPvcDrops OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packet dropped because local PVC was unavailable."
::= { cirbhUmtsErrorsTableEntry 12 }
cirbhUmtsErrorsRemotePvcDrops OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packet dropped because remote PVC was unavailable."
::= { cirbhUmtsErrorsTableEntry 13 }
cirbhUmtsErrorsBackhaulDrops OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets dropped on backhaul."
::= { cirbhUmtsErrorsTableEntry 14 }
-- *************************************************************
-- *
-- * ShortHaul Bulk Traffic History
-- *
-- *************************************************************
cirbhShortHaulBulkTable OBJECT-TYPE
SYNTAX SEQUENCE OF CirbhShortHaulBulkTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides historical information on the amount of
backhaul traffic contributed by each interface."
::= { cirbhShortHaulStats 7 }
cirbhShortHaulBulkTableEntry OBJECT-TYPE
SYNTAX CirbhShortHaulBulkTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents the average traffic for last second.
Each entry provides information on traffic rates for raw
and compressed data."
INDEX {
ifIndex,
cirbhShortHaulBulkHistory
}
::= { cirbhShortHaulBulkTable 1 }
CirbhShortHaulBulkTableEntry ::= SEQUENCE {
cirbhShortHaulBulkHistory CirbhHistoryIndex,
cirbhShortHaulBulkTimeStamp TimeStamp,
cirbhShortHaulBulkBaseUnit Unsigned32,
cirbhShortHaulBulkUtil OCTET STRING
}
cirbhShortHaulBulkHistory OBJECT-TYPE
SYNTAX CirbhHistoryIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index used to access history of
cirbhShortHaulBulkDataTable objects."
::= { cirbhShortHaulBulkTableEntry 1 }
cirbhShortHaulBulkTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time when sample was collected."
::= { cirbhShortHaulBulkTableEntry 2 }
cirbhShortHaulBulkBaseUnit OBJECT-TYPE
SYNTAX Unsigned32 (256..2147483647)
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Base Unit is an integer used to provide a range of bytes
rates provided in the cirbhShortHaulBulkUtil object. All
values in the cirbhShortHaulBulkUtil object share the same
base unit."
::= { cirbhShortHaulBulkTableEntry 3 }
cirbhShortHaulBulkUtil OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
UNITS "Bytes/Second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the amount of traffic transmitted
in a particular shorthaul. The object contains 1 to
128 pairs. The length of the octet string can be used
to calculate number of pairs. The information is in
the following format were each rate is stored as single
byte.
[rx,tx] * 128
The approximated rate can be calculated by multiplying
value from cirbhShortHaulBulkUtil times value in the
cirbhShortHaulBulkBaseUnit."
::= { cirbhShortHaulBulkTableEntry 4 }
-- *************************************************************
-- *
-- * BackHaul Table
-- *
-- *************************************************************
cirbhBackHaulTable OBJECT-TYPE
SYNTAX SEQUENCE OF CirbhBackHaulEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This table provides information on backHaul links."
::= { cirbhBackHaulInfo 1 }
cirbhBackHaulEntry OBJECT-TYPE
SYNTAX CirbhBackHaulEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Each entry represents a backhaul link between BSC and
a particular BTS site."
INDEX { ifIndex }
::= { cirbhBackHaulTable 1 }
CirbhBackHaulEntry ::= SEQUENCE {
cirbhBackHaulAdjectSerialNum SnmpAdminString,
cirbhBackHaulAdjectVendorType AutonomousType,
cirbhBackHaulRcvdUtilState CirbhBackHaulUtilizationState,
cirbhBackHaulSentUtilState CirbhBackHaulUtilizationState,
cirbhBackHaulRcvdUtil CirbhBackHaulUtilization,
cirbhBackHaulSentUtil CirbhBackHaulUtilization
}
cirbhBackHaulAdjectSerialNum OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object provides the serial number of the adjacent
device supporting the backhaul connection. This object
contains the same value as the corresponding
entPhysicalSerialNum object. The type of object like chassis
or module is provided by the cirbhBackHaulAdjectVendorType
object."
::= { cirbhBackHaulEntry 1 }
cirbhBackHaulAdjectVendorType OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object provides the vendor type of the adjacent
device supporting backhaul connection. This object
contains the same value as the corresponding
entPhysicalVendorType object."
::= { cirbhBackHaulEntry 2 }
cirbhBackHaulRcvdUtilState OBJECT-TYPE
SYNTAX CirbhBackHaulUtilizationState
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The utilization state for traffic received on
backhaul multilink.
The following objects will be used to calculate
link utilization state:
cirbhBackHaulAcceptableThreshold
cirbhBackHaulWarningThreshold
cirbhBackHaulOverloadedThreshold"
::= { cirbhBackHaulEntry 3 }
cirbhBackHaulSentUtilState OBJECT-TYPE
SYNTAX CirbhBackHaulUtilizationState
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The utilization state for traffic transmitted on
backhaul multilink.
The following objects will be used to calculate
link utilization state:
cirbhBackHaulAcceptableThreshold
cirbhBackHaulWarningThreshold
cirbhBackHaulOverloadedThreshold"
::= { cirbhBackHaulEntry 4 }
cirbhBackHaulRcvdUtil OBJECT-TYPE
SYNTAX CirbhBackHaulUtilization
UNITS "percent"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The average receive utilization of the link over the last
second."
::= { cirbhBackHaulEntry 5 }
cirbhBackHaulSentUtil OBJECT-TYPE
SYNTAX CirbhBackHaulUtilization
UNITS "percent"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The average transmit utilization of the link over the last
second."
::= { cirbhBackHaulEntry 6 }
-- *************************************************************
-- *
-- * BackHaul to ShortHaul Table
-- *
-- *************************************************************
cirbhBackHaulShortHaulTable OBJECT-TYPE
SYNTAX SEQUENCE OF CirbhBackHaulShortHaulEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This table lists the associations between shorthaul and
backhaul interfaces."
::= { cirbhBackHaulInfo 2 }
cirbhBackHaulShortHaulEntry OBJECT-TYPE
SYNTAX CirbhBackHaulShortHaulEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An entry indicates a single association between a backhaul and
shorthaul interface."
INDEX {
cirbhBackHaulShortHaulBhIndex,
cirbhBackHaulShortHaulShIndex
}
::= { cirbhBackHaulShortHaulTable 1 }
CirbhBackHaulShortHaulEntry ::= SEQUENCE {
cirbhBackHaulShortHaulBhIndex InterfaceIndex,
cirbhBackHaulShortHaulShIndex InterfaceIndex,
cirbhBackHaulShortHaulTimestamp TimeStamp
}
cirbhBackHaulShortHaulBhIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This object indicates the backhaul interface."
::= { cirbhBackHaulShortHaulEntry 1 }
cirbhBackHaulShortHaulShIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This object indicates the shorthaul interface."
::= { cirbhBackHaulShortHaulEntry 2 }
cirbhBackHaulShortHaulTimestamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object indicates the value of sysUpTime when the
entry was created."
::= { cirbhBackHaulShortHaulEntry 3 }
-- *************************************************************
-- *
-- * BackHaul History Table
-- *
-- *************************************************************
cirbhBackHaulHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CirbhBackHaulHistoryEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This table provides historical information on traffic
distribution on backhaul interface."
::= { cirbhBackHaulStats 1 }
cirbhBackHaulHistoryEntry OBJECT-TYPE
SYNTAX CirbhBackHaulHistoryEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Each entry provides information on the utilization of
backhaul interface. The utilization is broken down
by protocol and by direction. An entry is updated in
this table every second."
INDEX {
ifIndex,
cirbhBackHaulHistoryIndex
}
::= { cirbhBackHaulHistoryTable 1 }
CirbhBackHaulHistoryEntry ::= SEQUENCE {
cirbhBackHaulHistoryIndex CirbhHistoryIndex,
cirbhBackHaulHistoryRcvdUtil CirbhBackHaulUtilization,
cirbhBackHaulHistorySentUtil CirbhBackHaulUtilization,
cirbhBackHaulHistoryRcvdAbisUtil CirbhBackHaulUtilization,
cirbhBackHaulHistorySentAbisUtil CirbhBackHaulUtilization,
cirbhBackHaulHistoryRcvdUmtsUtil CirbhBackHaulUtilization,
cirbhBackHaulHistorySentUmtsUtil CirbhBackHaulUtilization,
cirbhBackHaulHistoryTimeStamp TimeStamp
}
cirbhBackHaulHistoryIndex OBJECT-TYPE
SYNTAX CirbhHistoryIndex
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An index used to access history of
cirbhBackHaulHistoryTable objects."
::= { cirbhBackHaulHistoryEntry 1 }
cirbhBackHaulHistoryRcvdUtil OBJECT-TYPE
SYNTAX CirbhBackHaulUtilization
UNITS "percent"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The average receive utilization of link over the last
second."
::= { cirbhBackHaulHistoryEntry 2 }
cirbhBackHaulHistorySentUtil OBJECT-TYPE
SYNTAX CirbhBackHaulUtilization
UNITS "percent"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The average transmit utilization of link over the last
second."
::= { cirbhBackHaulHistoryEntry 3 }
cirbhBackHaulHistoryRcvdAbisUtil OBJECT-TYPE
SYNTAX CirbhBackHaulUtilization
UNITS "percent"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The average receive utilization of link over the last
second that consisted of GSM-Abis traffic."
::= { cirbhBackHaulHistoryEntry 4 }
cirbhBackHaulHistorySentAbisUtil OBJECT-TYPE
SYNTAX CirbhBackHaulUtilization
UNITS "percent"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The average transmit utilization of link over the last
second that consisted of GSM-Abis traffic."
::= { cirbhBackHaulHistoryEntry 5 }
cirbhBackHaulHistoryRcvdUmtsUtil OBJECT-TYPE
SYNTAX CirbhBackHaulUtilization
UNITS "percent"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The average receive utilization of link over the last
second that consisted of UMTS traffic."
::= { cirbhBackHaulHistoryEntry 6 }
cirbhBackHaulHistorySentUmtsUtil OBJECT-TYPE
SYNTAX CirbhBackHaulUtilization
UNITS "percent"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The average transmit utilization of link over the last
second that consisted of UMTS traffic."
::= { cirbhBackHaulHistoryEntry 7 }
cirbhBackHaulHistoryTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Time when sample was collected."
::= { cirbhBackHaulHistoryEntry 8 }
-- *************************************************************
-- *
-- * BackHaul Statistics Table
-- *
-- *************************************************************
cirbhBackHaulStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CirbhBackHaulStatsEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This table provides current information on the utilization of
backhaul interface. One second load samples are collected
and the corresponding entry is incremented. The provides
a distribution of the traffic load. At the end of an
interval the information is collected and used to
populate entry in the cirbhBackHaulStatsHistoryTable.
The interval is specified by the cirbhBackHaulStatsInterval
object. The counters in this table increase until the
interval ends at which time they are reset."
::= { cirbhBackHaulStats 2 }
cirbhBackHaulStatsEntry OBJECT-TYPE
SYNTAX CirbhBackHaulStatsEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Each entry contains the distribution of traffic in the
current window specified by the cirbhBackHaulStatsInterval
object."
INDEX {
ifIndex,
cirbhStatsDirection,
cirbhStatsTrafficType
}
::= { cirbhBackHaulStatsTable 1 }
CirbhBackHaulStatsEntry ::= SEQUENCE {
cirbhStatsDirection CirbhTrafficDirection,
cirbhStatsTrafficType CirbhTrafficType,
cirbhStats000to009Seconds PerfCurrentCount,
cirbhStats010to019Seconds PerfCurrentCount,
cirbhStats020to029Seconds PerfCurrentCount,
cirbhStats030to039Seconds PerfCurrentCount,
cirbhStats040to049Seconds PerfCurrentCount,
cirbhStats050to059Seconds PerfCurrentCount,
cirbhStats060to069Seconds PerfCurrentCount,
cirbhStats070to079Seconds PerfCurrentCount,
cirbhStats080to089Seconds PerfCurrentCount,
cirbhStats090to100Seconds PerfCurrentCount,
cirbhStatsTimeStamp TimeStamp,
cirbhStatsMaxUtilization CirbhBackHaulUtilization,
cirbhStatsMaxTimeStamp TimeStamp
}
cirbhStatsDirection OBJECT-TYPE
SYNTAX CirbhTrafficDirection
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The direction of traffic on backhaul."
::= { cirbhBackHaulStatsEntry 1 }
cirbhStatsTrafficType OBJECT-TYPE
SYNTAX CirbhTrafficType
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The type of traffic."
::= { cirbhBackHaulStatsEntry 2 }
cirbhStats000to009Seconds OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total numbers of seconds during which the backhaul link
was utilized from 0 to 9 percent."
::= { cirbhBackHaulStatsEntry 3 }
cirbhStats010to019Seconds OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total numbers of seconds during which the backhaul link
was utilized from 10 to 19 percent."
::= { cirbhBackHaulStatsEntry 4 }
cirbhStats020to029Seconds OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total numbers of seconds during which the backhaul link
was utilized from 20 to 29 percent."
::= { cirbhBackHaulStatsEntry 5 }
cirbhStats030to039Seconds OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total numbers of seconds during which the backhaul link
was utilized from 30 to 39 percent."
::= { cirbhBackHaulStatsEntry 6 }
cirbhStats040to049Seconds OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total numbers of seconds during which the backhaul link
was utilized from 40 to 49 percent."
::= { cirbhBackHaulStatsEntry 7 }
cirbhStats050to059Seconds OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total numbers of seconds during which the backhaul link
was utilized from 50 to 59 percent."
::= { cirbhBackHaulStatsEntry 8 }
cirbhStats060to069Seconds OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total numbers of seconds during which the backhaul link
was utilized from 60 to 69 percent."
::= { cirbhBackHaulStatsEntry 9 }
cirbhStats070to079Seconds OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total numbers of seconds during which the backhaul link
was utilized from 70 to 79 percent."
::= { cirbhBackHaulStatsEntry 10 }
cirbhStats080to089Seconds OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total numbers of seconds during which the backhaul link
was utilized from 80 to 89 percent."
::= { cirbhBackHaulStatsEntry 11 }
cirbhStats090to100Seconds OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total numbers of seconds during which the backhaul link
was utilized from 90 to 100 percent."
::= { cirbhBackHaulStatsEntry 12 }
cirbhStatsTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Time when sample was collected."
::= { cirbhBackHaulStatsEntry 13 }
cirbhStatsMaxUtilization OBJECT-TYPE
SYNTAX CirbhBackHaulUtilization
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The maximum utilization encountered within interval."
::= { cirbhBackHaulStatsEntry 14 }
cirbhStatsMaxTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Time when cirbhStatsMaxUtilization was recorded."
::= { cirbhBackHaulStatsEntry 15 }
-- *************************************************************
-- *
-- * BackHaul Statistics History Table
-- *
-- *************************************************************
cirbhBackHaulStatsHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CirbhBackHaulStatsHistoryEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This table provides historical information of distribution
of load on backhaul interfaces."
::= { cirbhObjects 12 }
cirbhBackHaulStatsHistoryEntry OBJECT-TYPE
SYNTAX CirbhBackHaulStatsHistoryEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Each entry in this table is the data collected from the
cirbhBackHaulStatsTable table."
INDEX {
ifIndex,
cirbhStatsHistoryIndex,
cirbhStatsHistoryDirection,
cirbhStatsHistoryTrafficType
}
::= { cirbhBackHaulStatsHistoryTable 1 }
CirbhBackHaulStatsHistoryEntry ::= SEQUENCE {
cirbhStatsHistoryIndex CirbhHistoryIndex,
cirbhStatsHistoryDirection CirbhTrafficDirection,
cirbhStatsHistoryTrafficType CirbhTrafficType,
cirbhStatsHistory000to009Seconds PerfIntervalCount,
cirbhStatsHistory010to019Seconds PerfIntervalCount,
cirbhStatsHistory020to029Seconds PerfIntervalCount,
cirbhStatsHistory030to039Seconds PerfIntervalCount,
cirbhStatsHistory040to049Seconds PerfIntervalCount,
cirbhStatsHistory050to059Seconds PerfIntervalCount,
cirbhStatsHistory060to069Seconds PerfIntervalCount,
cirbhStatsHistory070to079Seconds PerfIntervalCount,
cirbhStatsHistory080to089Seconds PerfIntervalCount,
cirbhStatsHistory090to100Seconds PerfIntervalCount,
cirbhStatsHistoryTimeStamp TimeStamp,
cirbhStatsHistoryMaxUtilization CirbhBackHaulUtilization,
cirbhStatsHistoryMaxTimeStamp TimeStamp,
cirbhStatsHistoryAverage CirbhBackHaulUtilization
}
cirbhStatsHistoryIndex OBJECT-TYPE
SYNTAX CirbhHistoryIndex
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An index used to access each 15 minute entry."
::= { cirbhBackHaulStatsHistoryEntry 1 }
cirbhStatsHistoryDirection OBJECT-TYPE
SYNTAX CirbhTrafficDirection
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The direction of traffic on backhaul."
::= { cirbhBackHaulStatsHistoryEntry 2 }
cirbhStatsHistoryTrafficType OBJECT-TYPE
SYNTAX CirbhTrafficType
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The type of traffic in backhaul history table."
::= { cirbhBackHaulStatsHistoryEntry 3 }
cirbhStatsHistory000to009Seconds OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total numbers of seconds during which the backhaul link
was utilized from 0 to 9 percent."
::= { cirbhBackHaulStatsHistoryEntry 4 }
cirbhStatsHistory010to019Seconds OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total numbers of seconds during which the backhaul link
was utilized from 10 to 19 percent."
::= { cirbhBackHaulStatsHistoryEntry 5 }
cirbhStatsHistory020to029Seconds OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total numbers of seconds during which the backhaul link
was utilized from 20 to 29 percent."
::= { cirbhBackHaulStatsHistoryEntry 6 }
cirbhStatsHistory030to039Seconds OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total numbers of seconds during which the backhaul link
was utilized from 30 to 39 percent."
::= { cirbhBackHaulStatsHistoryEntry 7 }
cirbhStatsHistory040to049Seconds OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total numbers of seconds during which the backhaul link
was utilized from 40 to 49 percent."
::= { cirbhBackHaulStatsHistoryEntry 8 }
cirbhStatsHistory050to059Seconds OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total numbers of seconds during which the backhaul link
was utilized from 50 to 59 percent."
::= { cirbhBackHaulStatsHistoryEntry 9 }
cirbhStatsHistory060to069Seconds OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total numbers of seconds during which the backhaul link
was utilized from 60 to 69 percent."
::= { cirbhBackHaulStatsHistoryEntry 10 }
cirbhStatsHistory070to079Seconds OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total numbers of seconds during which the backhaul link
was utilized from 70 to 79 percent."
::= { cirbhBackHaulStatsHistoryEntry 11 }
cirbhStatsHistory080to089Seconds OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total numbers of seconds during which the backhaul link
was utilized from 80 to 89 percent."
::= { cirbhBackHaulStatsHistoryEntry 12 }
cirbhStatsHistory090to100Seconds OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total numbers of seconds during which the backhaul link
was utilized from 90 to 100 percent."
::= { cirbhBackHaulStatsHistoryEntry 13 }
cirbhStatsHistoryTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"End time when sample was collected."
::= { cirbhBackHaulStatsHistoryEntry 14 }
cirbhStatsHistoryMaxUtilization OBJECT-TYPE
SYNTAX CirbhBackHaulUtilization
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The maximum utilization encountered within interval."
::= { cirbhBackHaulStatsHistoryEntry 15 }
cirbhStatsHistoryMaxTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Time when cirbhStatsHistoryMaxUtilization was recorded."
::= { cirbhBackHaulStatsHistoryEntry 16 }
cirbhStatsHistoryAverage OBJECT-TYPE
SYNTAX CirbhBackHaulUtilization
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The average utilization over the specified time period."
::= { cirbhBackHaulStatsHistoryEntry 17 }
-- *************************************************************
-- * *
-- * Notification Enable Objects *
-- * *
-- *************************************************************
cirbhGsmAlarmNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the agent should
generate the ciscoIpRanBackHaulGsmAlarm defined in
this MIB module.
'true' Indicates that ciscoIpRanBackHaulGsmAlarm
notification is to be generated.
'false' Indicates that ciscoIpRanBackHaulGsmAlarm
notification generation is disabled."
DEFVAL { false }
::= { cirbhNotifEnables 1 }
cirbhUmtsAlarmNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the agent should
generate the ciscoIpRanBackHaulUmtsAlarm defined in
this MIB module.
'true' Indicates that ciscoIpRanBackHaulUmtsAlarm
notification is to be generated.
'false' Indicates that ciscoIpRanBackHaulUmtsAlarm
notification generation is disabled."
DEFVAL { false }
::= { cirbhNotifEnables 2 }
cirbhUtilNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies whether the agent should
generate the ciscoIpRanBackHaulRcvdUtil or
ciscoIpRanBackHaulSentUtil defined in this MIB module.
'true' Indicates that ciscoIpRanBackHaulRcvdUtil and
ciscoIpRanBackHaulSentUtil notifications
are to be generated.
'false' Indicates that ciscoIpRanBackHaulRcvdUtil and
ciscoIpRanBackHaulSentUtil notifications
generation is disabled."
DEFVAL { false }
::= { cirbhNotifEnables 3 }
-- *************************************************************
-- * *
-- * Notifications *
-- * *
-- *************************************************************
ciscoIpRanBackHaulGsmAlarm NOTIFICATION-TYPE
OBJECTS {
ifDescr,
cirbhGsmAlarmConnectState,
cirbhGsmAlarmLocalState,
cirbhGsmAlarmRemoteState,
cirbhGsmAlarmRedundancyState
}
STATUS current
DESCRIPTION
"This notification is generated whenever the
values of the specified objects change."
::= { ciscoIpRanBackHaulMIBNotifs 1 }
ciscoIpRanBackHaulUmtsAlarm NOTIFICATION-TYPE
OBJECTS {
ifDescr,
cirbhUmtsConnectionState,
cirbhUmtsAlarmRxLocalState,
cirbhUmtsAlarmRxRemoteState,
cirbhUmtsAlarmTxLocalState,
cirbhUmtsAlarmTxRemoteState,
cirbhUmtsConnectionRedundState
}
STATUS current
DESCRIPTION
"This notification is generated whenever the
values of the specified objects change."
::= { ciscoIpRanBackHaulMIBNotifs 2 }
ciscoIpRanBackHaulRcvdUtil NOTIFICATION-TYPE
OBJECTS {
ifDescr,
cirbhBackHaulRcvdUtilState,
cirbhBackHaulRcvdUtil
}
STATUS obsolete
DESCRIPTION
"This notification is generated once for the interval
specified by the cirbhBackHaulStatsInterval object
for the following state transitions.
'acceptable' -> 'warning'
'acceptable' -> 'overloaded'
'warning' -> 'overloaded'
At the end of the interval specified by the
cirbhBackHaulUtilInterval object another notification
will be generated if the current state is
different from state sent in last notification."
::= { ciscoIpRanBackHaulMIBNotifs 3 }
ciscoIpRanBackHaulSentUtil NOTIFICATION-TYPE
OBJECTS {
ifDescr,
cirbhBackHaulSentUtilState,
cirbhBackHaulSentUtil
}
STATUS obsolete
DESCRIPTION
"This notification is generated once for the interval
specified by the cirbhBackHaulStatsInterval object
for the following state transitions.
'acceptable' -> 'warning'
'acceptable' -> 'overloaded'
'warning' -> 'overloaded'
At the end of the interval specified by the
cirbhBackHaulUtilInterval object another notification
will be generated if the current state is
different from state sent in last notification."
::= { ciscoIpRanBackHaulMIBNotifs 4 }
-- *************************************************************
-- * *
-- * Conformance Information *
-- * *
-- *************************************************************
ciscoIpRanBackHaulMIBCompliances OBJECT IDENTIFIER
::= { ciscoIpRanBackHaulMIBConform 1 }
ciscoIpRanBackHaulMIBGroups OBJECT IDENTIFIER
::= { ciscoIpRanBackHaulMIBConform 2 }
-- ********************************************************************
-- Compliance Statements
-- ********************************************************************
ciscoIpRanBackHaulMIBCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for entities which implement
the CISCO-IP-RAN-BACKHAUL-MIB.my managment information
base."
MODULE -- this module
MANDATORY-GROUPS {
ciscoIpRanBackHaulScalarsGroup,
ciscoIpRanBackHaulConfigGroup,
ciscoIpRanBackHaulStatsGroup,
ciscoIpRanBackHaulAlarmGroup,
ciscoIpRanBackHaulErrorsGroup,
ciscoIpRanBackHaulHistoryGroup,
ciscoIpRanBackHaulNotifGroup
}
::= { ciscoIpRanBackHaulMIBCompliances 1 }
ciscoIpRanBackHaulMIBComplianceRev1 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for entities which implement
the CISCO-IP-RAN-BACKHAUL-MIB.my managment information
base."
MODULE -- this module
MANDATORY-GROUPS {
ciscoIpRanBackHaulScalarsGroup,
ciscoIpRanBackHaulConfigGroup,
ciscoIpRanBackHaulStatsGroup,
ciscoIpRanBackHaulAlarmGroup,
ciscoIpRanBackHaulErrorsGroup,
ciscoIpRanBackHaulHistoryGroup,
ciscoIpRanBackHaulNotifGroup,
ciscoIpRanBackHaulShortHaulGroup,
ciscoIpRanBackHaulAlarmGroupSup1
}
::= { ciscoIpRanBackHaulMIBCompliances 2 }
ciscoIpRanBackHaulMIBComplianceRev2 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for entities which implement
the CISCO-IP-RAN-BACKHAUL-MIB.my managment information
base."
MODULE -- this module
MANDATORY-GROUPS {
ciscoIpRanBackHaulScalarsGroupRev2,
ciscoIpRanBackHaulConfigGroup,
ciscoIpRanBackHaulConfigGroupSup2,
ciscoIpRanBackHaulConfigGroupSup3,
ciscoIpRanBackHaulStatsGroup,
ciscoIpRanBackHaulAlarmGroup,
ciscoIpRanBackHaulHistoryGroupRev2,
ciscoIpRanBackHaulNotifGroupRev2,
ciscoIpRanBackHaulAlarmGroupSup1,
ciscoIpRanBackHaulCongestionGroup,
ciscoIpRanBackHaulGsmErrorsGroup,
ciscoIpRanBackHaulUmtsErrorsGroup
}
::= { ciscoIpRanBackHaulMIBCompliances 3 }
ciscoIpRanBackHaulMIBComplianceRev3 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the CISCO-IP-RAN-BACKHAUL-MIB.my managment information
base."
MODULE -- this module
MANDATORY-GROUPS {
ciscoIpRanBackHaulScalarsGroupRev2,
ciscoIpRanBackHaulConfigGroup,
ciscoIpRanBackHaulConfigGroupSup2,
ciscoIpRanBackHaulConfigGroupSup3,
ciscoIpRanBackHaulStatsGroup,
ciscoIpRanBackHaulAlarmGroup,
ciscoIpRanBackHaulHistoryGroupRev3,
ciscoIpRanBackHaulNotifGroupRev2,
ciscoIpRanBackHaulAlarmGroupSup1,
ciscoIpRanBackHaulCongestionGroup,
ciscoIpRanBackHaulGsmErrorsGroup,
ciscoIpRanBackHaulUmtsErrorsGroup
}
::= { ciscoIpRanBackHaulMIBCompliances 4 }
-- ****************************************************************
-- Units of Conformance
-- ****************************************************************
ciscoIpRanBackHaulScalarsGroup OBJECT-GROUP
OBJECTS {
cirbhSnmpTrafficMode,
cirbhLocation,
cirbhBackHaulStatsInterval,
cirbhBackHaulStatsEntries,
cirbhBackHaulAcceptableThreshold,
cirbhBackHaulWarningThreshold,
cirbhBackHaulOverloadedThreshold,
cirbhBackHaulUtilInterval,
cirbhGsmAlarmNotifEnabled,
cirbhUmtsAlarmNotifEnabled,
cirbhUtilNotifEnabled
}
STATUS deprecated
DESCRIPTION
"Cisco IP RAN Input Scalars Group."
::= { ciscoIpRanBackHaulMIBGroups 1 }
ciscoIpRanBackHaulConfigGroup OBJECT-GROUP
OBJECTS {
cirbhInfoProtocol,
cirbhInfoLocalAddrType,
cirbhInfoLocalAddr,
cirbhInfoLocalPortNumber,
cirbhInfoRemoteAddrType,
cirbhInfoRemoteAddr,
cirbhInfoRemotePortNumber
}
STATUS current
DESCRIPTION
"Cisco IP RAN Configuration Group."
::= { ciscoIpRanBackHaulMIBGroups 2 }
ciscoIpRanBackHaulStatsGroup OBJECT-GROUP
OBJECTS {
cirbhStatsRcvdSamples,
cirbhStatsSentSamples,
cirbhStatsRcvdBackHaulPackets,
cirbhStatsSentBackHaulPackets,
cirbhStatsRcvdBackHaulBytes,
cirbhStatsSentBackHaulBytes
}
STATUS current
DESCRIPTION
"Cisco IP RAN Backhaul Statistics Group."
::= { ciscoIpRanBackHaulMIBGroups 3 }
ciscoIpRanBackHaulAlarmGroup OBJECT-GROUP
OBJECTS {
cirbhGsmAlarmConnectState,
cirbhGsmAlarmLocalState,
cirbhGsmAlarmRemoteState,
cirbhGsmAlarmRedundancyState,
cirbhUmtsConnectionState,
cirbhUmtsConnectionRedundState,
cirbhUmtsAlarmRxLocalState,
cirbhUmtsAlarmRxRemoteState,
cirbhUmtsAlarmTxLocalState,
cirbhUmtsAlarmTxRemoteState
}
STATUS current
DESCRIPTION
"Cisco IP RAN Alarm Group."
::= { ciscoIpRanBackHaulMIBGroups 4 }
ciscoIpRanBackHaulErrorsGroup OBJECT-GROUP
OBJECTS {
cirbhErrorsBhPeerNotReadyDrops,
cirbhErrorsBhPeerNotActiveDrops,
cirbhErrorsBhInvalidPackets,
cirbhErrorsBhLostRcvdPackets,
cirbhErrorsBhLostSentPackets,
cirbhErrorsBhMissedPackets,
cirbhErrorsBhMissedLatePackets,
cirbhErrorsBhMissedLostPackets,
cirbhErrorsBhMissedNoMemPackets,
cirbhErrorsBhMissedResetPackets,
cirbhErrorsDecompFailures,
cirbhErrorsCompFailures,
cirbhErrorsCompNoPacketFailures,
cirbhErrorsCompNoIntFailures,
cirbhErrorsCompIntDownFailures,
cirbhErrorsCompEncapFailures,
cirbhErrorsCompQosDrops
}
STATUS deprecated
DESCRIPTION
"Cisco protocol errors Group."
::= { ciscoIpRanBackHaulMIBGroups 5 }
ciscoIpRanBackHaulHistoryGroup OBJECT-GROUP
OBJECTS {
cirbhShortHaulRcvdRate,
cirbhShortHaulSentRate,
cirbhShortHaulRcvdCompressRate,
cirbhShortHaulSentCompressRate,
cirbhShortHaulTimeStamp,
cirbhShortHaulRcvdUtilization,
cirbhShortHaulSentUtilization,
cirbhBackHaulRcvdUtilState,
cirbhBackHaulSentUtilState,
cirbhBackHaulRcvdUtil,
cirbhBackHaulSentUtil,
cirbhBackHaulAdjectSerialNum,
cirbhBackHaulAdjectVendorType,
cirbhBackHaulHistoryRcvdUtil,
cirbhBackHaulHistorySentUtil,
cirbhBackHaulHistoryRcvdAbisUtil,
cirbhBackHaulHistorySentAbisUtil,
cirbhBackHaulHistoryRcvdUmtsUtil,
cirbhBackHaulHistorySentUmtsUtil,
cirbhBackHaulHistoryTimeStamp,
cirbhStats000to009Seconds,
cirbhStats010to019Seconds,
cirbhStats020to029Seconds,
cirbhStats030to039Seconds,
cirbhStats040to049Seconds,
cirbhStats050to059Seconds,
cirbhStats060to069Seconds,
cirbhStats070to079Seconds,
cirbhStats080to089Seconds,
cirbhStats090to100Seconds,
cirbhStatsTimeStamp,
cirbhStatsMaxUtilization,
cirbhStatsMaxTimeStamp,
cirbhStatsHistory000to009Seconds,
cirbhStatsHistory010to019Seconds,
cirbhStatsHistory020to029Seconds,
cirbhStatsHistory030to039Seconds,
cirbhStatsHistory040to049Seconds,
cirbhStatsHistory050to059Seconds,
cirbhStatsHistory060to069Seconds,
cirbhStatsHistory070to079Seconds,
cirbhStatsHistory080to089Seconds,
cirbhStatsHistory090to100Seconds,
cirbhStatsHistoryTimeStamp,
cirbhStatsHistoryMaxUtilization,
cirbhStatsHistoryMaxTimeStamp,
cirbhStatsHistoryAverage
}
STATUS obsolete
DESCRIPTION
"Cisco IP RAN Utilization History Group."
::= { ciscoIpRanBackHaulMIBGroups 6 }
ciscoIpRanBackHaulNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ciscoIpRanBackHaulGsmAlarm,
ciscoIpRanBackHaulUmtsAlarm,
ciscoIpRanBackHaulRcvdUtil,
ciscoIpRanBackHaulSentUtil
}
STATUS obsolete
DESCRIPTION
"Cisco IP RAN Notifications."
::= { ciscoIpRanBackHaulMIBGroups 7 }
ciscoIpRanBackHaulShortHaulGroup OBJECT-GROUP
OBJECTS { cirbhBackHaulShortHaulTimestamp }
STATUS obsolete
DESCRIPTION
"Cisco IP RAN Backhaul to Shorthaul Group."
::= { ciscoIpRanBackHaulMIBGroups 8 }
ciscoIpRanBackHaulAlarmGroupSup1 OBJECT-GROUP
OBJECTS { cirbhUmtsConnectionRootIfIndex }
STATUS current
DESCRIPTION
"Additional objects for Cisco IP RAN Alarm Group."
::= { ciscoIpRanBackHaulMIBGroups 9 }
ciscoIpRanBackHaulScalarsGroupRev2 OBJECT-GROUP
OBJECTS {
cirbhSnmpTrafficMode,
cirbhLocation,
cirbhGsmAlarmNotifEnabled,
cirbhUmtsAlarmNotifEnabled
}
STATUS current
DESCRIPTION
"Cisco IP RAN Input Scalars Group."
::= { ciscoIpRanBackHaulMIBGroups 10 }
ciscoIpRanBackHaulConfigGroupSup2 OBJECT-GROUP
OBJECTS {
cirbhInfoAdjectSerialNum,
cirbhInfoAdjectVendorType,
cirbhInfoBackhaulRxIfIndex,
cirbhInfoBackhaulTxIfIndex,
cirbhInfoShBulkLastIndex
}
STATUS current
DESCRIPTION
"Cisco IP RAN Configuration Group Sup2."
::= { ciscoIpRanBackHaulMIBGroups 11 }
ciscoIpRanBackHaulHistoryGroupRev2 OBJECT-GROUP
OBJECTS {
cirbhShortHaulRcvdRate,
cirbhShortHaulSentRate,
cirbhShortHaulRcvdCompressRate,
cirbhShortHaulSentCompressRate,
cirbhShortHaulTimeStamp,
cirbhShortHaulRcvdUtilization,
cirbhShortHaulSentUtilization,
cirbhShortHaulBulkTimeStamp,
cirbhShortHaulBulkBaseUnit,
cirbhShortHaulBulkUtil
}
STATUS obsolete
DESCRIPTION
"Cisco IP RAN Utilization History Group."
::= { ciscoIpRanBackHaulMIBGroups 12 }
ciscoIpRanBackHaulNotifGroupRev2 NOTIFICATION-GROUP
NOTIFICATIONS {
ciscoIpRanBackHaulGsmAlarm,
ciscoIpRanBackHaulUmtsAlarm
}
STATUS current
DESCRIPTION
"Cisco IP RAN Notifications."
::= { ciscoIpRanBackHaulMIBGroups 13 }
ciscoIpRanBackHaulCongestionGroup OBJECT-GROUP
OBJECTS {
cirbhCongestionEnabled,
cirbhCongestionDrops,
cirbhCongestionDroppedBytes,
cirbhCongestionEvents,
cirbhCongestionActive,
cirbhCongestionDuration
}
STATUS current
DESCRIPTION
"Cisco IP RAN congestion object group."
::= { ciscoIpRanBackHaulMIBGroups 14 }
ciscoIpRanBackHaulGsmErrorsGroup OBJECT-GROUP
OBJECTS {
cirbhGsmErrorsPeerNotReadyDrops,
cirbhGsmErrorsPeerNotActiveDrops,
cirbhGsmErrorsInvalidPackets,
cirbhGsmErrorsLostRcvdPackets,
cirbhGsmErrorsLostSentPackets,
cirbhGsmErrorsMissedPackets,
cirbhGsmErrorsMissedLatePackets,
cirbhGsmErrorsMissedLostPackets,
cirbhGsmErrorsMissedNoMemPackets,
cirbhGsmErrorsMissedResetPackets,
cirbhGsmErrorsDecompFailures,
cirbhGsmErrorsCompFailures,
cirbhGsmErrorsCompNoPacketFailures,
cirbhGsmErrorsCompNoIntFailures,
cirbhGsmErrorsCompIntDownFailures,
cirbhGsmErrorsCompEncapFailures,
cirbhGsmErrorsCompQosDrops,
cirbhGsmErrorsFastSendFailures,
cirbhGsmErrorsTxPacketFailures,
cirbhGsmErrorsTxNoBuffers,
cirbhGsmErrorsTxResets,
cirbhGsmErrorsOverruns,
cirbhGsmErrorsInterruptFailures,
cirbhGsmErrorsLateArrivals,
cirbhGsmErrorsEarlyArrivals
}
STATUS current
DESCRIPTION
"Cisco GSM-Abis protocol errors Group."
::= { ciscoIpRanBackHaulMIBGroups 15 }
ciscoIpRanBackHaulUmtsErrorsGroup OBJECT-GROUP
OBJECTS {
cirbhUmtsErrorsPeerNotReadyDrops,
cirbhUmtsErrorsInvalidPackets,
cirbhUmtsErrorsDecompFailures,
cirbhUmtsErrorsCompFailures,
cirbhUmtsErrorsCompNoPacketFailures,
cirbhUmtsErrorsCompNoIntFailures,
cirbhUmtsErrorsCompIntDownFailures,
cirbhUmtsErrorsCompEncapFailures,
cirbhUmtsErrorsCompQosDrops,
cirbhUmtsErrorsShorthaulPakFailures,
cirbhUmtsErrorsUmtsEncapFailures,
cirbhUmtsErrorsLocalPvcDrops,
cirbhUmtsErrorsRemotePvcDrops,
cirbhUmtsErrorsBackhaulDrops
}
STATUS current
DESCRIPTION
"Cisco UMTS-Iub protocol errors Group."
::= { ciscoIpRanBackHaulMIBGroups 16 }
ciscoIpRanBackHaulConfigGroupSup3 OBJECT-GROUP
OBJECTS { cirbhInfoOptimizeTraffic }
STATUS current
DESCRIPTION
"Cisco IP RAN Configuration Group for Optimization."
::= { ciscoIpRanBackHaulMIBGroups 17 }
ciscoIpRanBackHaulHistoryGroupRev3 OBJECT-GROUP
OBJECTS {
cirbhShortHaulBulkTimeStamp,
cirbhShortHaulBulkBaseUnit,
cirbhShortHaulBulkUtil
}
STATUS current
DESCRIPTION
"Cisco IP RAN Utilization History Group."
::= { ciscoIpRanBackHaulMIBGroups 18 }
END
Reference in New Issue View Git Blame Copy Permalink