MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-IETF-FRR-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1388 lines
49 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-IETF-FRR-MIB.my
--
-- February 2003, Adrien Grise
--
-- Copyright (c) 2003-2006, 2008 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-IETF-FRR-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, Unsigned32, Counter32, Gauge32, TimeTicks,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION, TruthValue, RowStatus,
TimeStamp
FROM SNMPv2-TC
InterfaceIndex, InterfaceIndexOrZero
FROM IF-MIB
MplsTunnelIndex, MplsTunnelInstanceIndex,
MplsTunnelAffinity, MplsBitRate, MplsLsrIdentifier
FROM MPLS-TC-STD-MIB
ciscoExperiment
FROM CISCO-SMI
;
cmplsFrrMIB MODULE-IDENTITY
LAST-UPDATED
"200804291200Z" -- 29 April 2008 12:00:00 GMT
ORGANIZATION
"Cisco Systems, Inc."
CONTACT-INFO
"
Adrien Grise
Postal: 300 Apollo Drive
Cisco Systems, Inc.
Chelmsford, MA 01824
Tel: +1-978-497-3989
Email: agrise@cisco.com
Thomas D. Nadeau
Postal: Cisco Systems, Inc.
250 Apollo Drive
Chelmsford, MA 01924
Tel: +1-978-244-3051
Email: tnadeau@cisco.com
MPLS MIB Development Team
Postal: Cisco Systems, Inc.
250 Apollo Drive
Chelmsford, MA 01924
Tel: +1-978-497-3989
Email: ch-mpls-mib-dev@cisco.com
"
DESCRIPTION
"This MIB module contains managed object definitions for MPLS
Fast Reroute (FRR) as defined in:Pan, P., Gan, D., Swallow, G.,
Vasseur, J.Ph., Cooper, D., Atlas, A., Jork, M., Fast Reroute
Techniques in RSVP-TE, draft-ietf-mpls-rsvp-lsp-fastreroute-
00.txt, January 2002."
-- Revision history.
REVISION
"200804291200Z" -- 29 April 2008 12:00:00 GMT
DESCRIPTION
"Added support for cmplsFrrUnProtected notification. It is
defined in version 2 of the ietf draft. The notification's
variable bindings have been modified from the draft form to
match the previous approved Cisco-ized draft form as defined
for the cmplsFrrProtected notification."
REVISION
"200211051200Z" -- 05 November 2002 12:00:00 GMT
DESCRIPTION
"Cisco'ized the MPLS-FRR-MIB.my file"
REVISION
"200211011200Z" -- 01 November 2002 12:00:00 GMT
DESCRIPTION
"Added support for Facility-based FRR.
Removed tables that were redundant with
other MPLS MIBs.
Assigned experimental.120."
REVISION
"200203221200Z" -- 18 April 2002 12:00:00 GMT
DESCRIPTION
"Initial draft version."
::= { ciscoExperiment 98 }
-- MPLS Fast Reroute textual-conventions.
MplsFrrDetourIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Index into mplsFrrDetourTable."
SYNTAX Integer32 (1..65535)
-- End of MPLS Fast Reroute textual-conventions.
-- Top level components of this MIB.
cmplsFrrNotif OBJECT IDENTIFIER ::= { cmplsFrrMIB 0 }
cmplsFrrScalars OBJECT IDENTIFIER ::= { cmplsFrrMIB 1 }
cmplsFrrObjects OBJECT IDENTIFIER ::= { cmplsFrrMIB 2 }
-- objects that work for either method of FRR
cmplsFrrGeneralObjects OBJECT IDENTIFIER ::= { cmplsFrrObjects 1 }
-- objects defined for 1-to-1 style FRR
cmplsFrr1to1Objects OBJECT IDENTIFIER ::= { cmplsFrrObjects 2 }
-- objects defined for Facility Backup style FRR
cmplsFrrFacObjects OBJECT IDENTIFIER ::= { cmplsFrrObjects 3 }
--
-- Ed Note: need to define two conformance statements: one for
-- one for 1-2-1 and for Facility. Might need separate ones for
-- read-only vs. read-write too. There is currently just a single
-- conformance statement due to time constraints.
--
cmplsFrrConformance OBJECT IDENTIFIER ::= { cmplsFrrMIB 3 }
-- MPLS Fast Reroute scalars.
cmplsFrrDetourIncoming OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of detour LSPs entering the device if
mplsFrrConstProtectionMethod is set to oneToOneBackup(0), or
or 0 if mplsFrrConstProtectionMethod is set to
facilityBackup(1)."
DEFVAL { 0 }
::= { cmplsFrrScalars 1 }
cmplsFrrDetourOutgoing OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of detour LSPs leaving the device if
mplsFrrConstProtectionMethod is set to oneToOneBackup(0),
or 0 if mplsFrrConstProtectionMethod is set to
to facilityBackup(1)."
DEFVAL { 0 }
::= { cmplsFrrScalars 2 }
cmplsFrrDetourOriginating OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of detour LSPs originating at this PLR if
mplsFrrConstProtectionMethod is set to oneToOneBackup(0).
This object MUST return 0 if the mplsFrrConstProtectionMethod
is set to facilityBackup(1)."
DEFVAL { 0 }
::= { cmplsFrrScalars 3 }
cmplsFrrSwitchover OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunnel instances that are switched over to their
corresponding detour LSP if mplsFrrConstProtectionMethod is set
to oneToOneBackup(0), or tunnels being switched over if
mplsFrrConstProtectionMethod is set to facilityBackup(1)."
DEFVAL { 0 }
::= { cmplsFrrScalars 4 }
cmplsFrrNumOfConfIfs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of MPLS interfaces configured for
protection by the FRR feature, otherwise this value
MUST return 0 to indicate that LSPs traversing any
interface may be protected."
DEFVAL { 0 }
::= { cmplsFrrScalars 5 }
cmplsFrrActProtectedIfs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of interfaces currently being protected
by the FRR feature if mplsFrrConstProtectionMethod is set to
facilityBackup(1), otherwise this value should return 0 to
indicate that LSPs traversing any interface may be protected.
This value MUST be less than or equal to mplsFrrConfIfs."
DEFVAL { 0 }
::= { cmplsFrrScalars 6 }
cmplsFrrConfProtectingTuns OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of bypass tunnels configured to
protect facilities on this LSR using the FRR feature
if mplsFrrConstProtectionMethod is set to
facilityBackup(1), otherwise this value MUST return
0."
DEFVAL { 0 }
::= { cmplsFrrScalars 7 }
cmplsFrrActProtectedTuns OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of bypass tunnels indicated in
mplsFrrConfProtectingTuns whose operStatus
is up(1) indicating that they are currently protecting
facilities on this LSR using the FRR feature. This
object MUST return 0 if mplsFrrConstProtectionMethod
is set to facilityBackup(1)."
DEFVAL { 0 }
::= { cmplsFrrScalars 8 }
cmplsFrrActProtectedLSPs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of LSPs currently protected by
the FRR feature. If mplsFrrConstProtectionMethod is set
to facilityBackup(1)this object MUST return 0."
DEFVAL { 0 }
::= { cmplsFrrScalars 9 }
cmplsFrrConstProtectionMethod OBJECT-TYPE
SYNTAX INTEGER { oneToOneBackup(0),
facilityBackup(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates which protection method is to be used for fast
reroute. Some devices may require a reboot of their routing
processors if this variable is changed. An agent which
does not wish to reboot or modify its FRR mode
MUST return an inconsistentValue error. Please
consult the device's agent capability statement
for more details."
::= { cmplsFrrScalars 10 }
cmplsFrrNotifsEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables FRR notifications defined in this MIB
module. Notifications are disabled by default."
DEFVAL { false }
::= { cmplsFrrScalars 11 }
cmplsFrrLogTableMaxEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum number of entries allowed in the FRR
Log table. Agents receiving SETs for values that cannot be
used must return an inconsistent value error. If a manager
sets this value to 0, this indicates that no logging should
take place by the agent.
If this value is returned as 0, this indicates
that no additional log entries will be added to the current
table either because the table has been completely
filled or logging has been disabled. However, agents
may wish to not delete existing entries in the log table
so that managers may review them in the future.
It is implied that when mplsFrrLogTableCurrEntries
has reached the value of this variable, that logging
entries may not continue to be added to the table,
although existing ones may remain. Furthermore, an
agent may begin to delete existing (perhaps the
oldest entries) entries to make room for new ones."
DEFVAL { 0 }
::= { cmplsFrrScalars 12 }
cmplsFrrLogTableCurrEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current number of entries in the FRR log
table."
::= { cmplsFrrScalars 13 }
cmplsFrrNotifMaxRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates the number of milliseconds
that must elapse between notification emissions. If
events occur more rapidly, the implementation may
simply fail to emit these notifications during that
period, or may queue them until an appropriate
time in the future. A value of 0 means no minimum
elapsed period is specified."
DEFVAL { 0 }
::= { cmplsFrrScalars 14 }
--
-- General FRR Table Section
--
-- These tables apply to both types of FRR
-- and should be implemented by all LSRs supporting
-- FRR.
--
-- MPLS Fast Reroute Constraints table
cmplsFrrConstTable OBJECT-TYPE
SYNTAX SEQUENCE OF CMplsFrrConstEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table shows detour setup constraints."
::= { cmplsFrrGeneralObjects 1 }
cmplsFrrConstEntry OBJECT-TYPE
SYNTAX CMplsFrrConstEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents detour LSP or bypass tunnel
setup constraints for a tunnel instance to be protected by
detour LSPs or a tunnel. Agents must allow entries in this table
to be created only for tunnel instances that require fast-reroute.
Entries indexed with mplsFrrConstIfIndex set to 0 apply to all
interfaces on this device for which the FRR feature can operate
on."
INDEX { cmplsFrrConstIfIndex,
cmplsFrrConstTunnelIndex,
cmplsFrrConstTunnelInstance
}
::= { cmplsFrrConstTable 1 }
CMplsFrrConstEntry ::= SEQUENCE {
cmplsFrrConstIfIndex InterfaceIndexOrZero,
cmplsFrrConstTunnelIndex MplsTunnelIndex,
cmplsFrrConstTunnelInstance MplsTunnelInstanceIndex,
cmplsFrrConstSetupPrio Unsigned32,
cmplsFrrConstHoldingPrio Unsigned32,
cmplsFrrConstInclAnyAffinity MplsTunnelAffinity,
cmplsFrrConstInclAllAffinity MplsTunnelAffinity,
cmplsFrrConstExclAllAffinity MplsTunnelAffinity,
cmplsFrrConstHopLimit Unsigned32,
cmplsFrrConstBandwidth MplsBitRate,
cmplsFrrConstRowStatus RowStatus,
cmplsFrrConstNumProtectingTunOnIf Gauge32,
cmplsFrrConstNumProtectedTunOnIf Gauge32
}
cmplsFrrConstIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies an interface for which fast reroute is
configured. Tabular entries indexed with a 0 value apply to all
interfaces on this device for which the FRR feature can operate
on."
::= { cmplsFrrConstEntry 1 }
cmplsFrrConstTunnelIndex OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies a tunnel for which fast reroute is
requested."
::= { cmplsFrrConstEntry 2 }
cmplsFrrConstTunnelInstance OBJECT-TYPE
SYNTAX MplsTunnelInstanceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies an instance of this tunnel for which fast
reroute is requested."
::= { cmplsFrrConstEntry 3 }
cmplsFrrConstSetupPrio OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the setup priority of detour LSP."
REFERENCE
"1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al,
RFC 3209, December 2001"
DEFVAL { 7 }
::= { cmplsFrrConstEntry 4 }
cmplsFrrConstHoldingPrio OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the holding priority for detour LSP."
REFERENCE
"1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al,
RFC 3209, December 2001"
DEFVAL { 0 }
::= { cmplsFrrConstEntry 5 }
cmplsFrrConstInclAnyAffinity OBJECT-TYPE
SYNTAX MplsTunnelAffinity
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A link satisfies the include-any constraint if and only if the
constraint is zero, or the link and the constraint have a
resource class in common."
REFERENCE
"1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al,
RFC 3209, December 2001."
DEFVAL { 0 }
::= { cmplsFrrConstEntry 6 }
cmplsFrrConstInclAllAffinity OBJECT-TYPE
SYNTAX MplsTunnelAffinity
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A link satisfies the include-all constraint if and only if the
link contains all of the administrative groups specified in the
constraint."
REFERENCE
"1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al,
RFC 3209, December 2001."
DEFVAL { 0 }
::= { cmplsFrrConstEntry 7 }
cmplsFrrConstExclAllAffinity OBJECT-TYPE
SYNTAX MplsTunnelAffinity
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A link satisfies the exclude-all constraint if and only if the
link contains none of the administrative groups specified in the
constraint."
REFERENCE
"1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al,
RFC 3209, December 2001."
DEFVAL { 0 }
::= { cmplsFrrConstEntry 8 }
cmplsFrrConstHopLimit OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of hops that the detour LSP may traverse."
REFERENCE
"Pan, P., Gan, D., Swallow, G., Vasseur, J.Ph., Cooper, D.,
Atlas, A., Jork, M., Fast Reroute Techniques in RSVP-TE, draft-
ietf-mpls-rsvp-lsp-fastreroute-00.txt, January 2002. Work in
progress."
DEFVAL { 32 }
::= { cmplsFrrConstEntry 9 }
cmplsFrrConstBandwidth OBJECT-TYPE
SYNTAX MplsBitRate
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable represents the bandwidth for detour LSPs of this
tunnel, in units of thousands of bits per second (Kbps)."
DEFVAL { 1 }
::= { cmplsFrrConstEntry 10 }
cmplsFrrConstRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create, modify, and/or delete a row in
this table."
::= { cmplsFrrConstEntry 11 }
cmplsFrrConstNumProtectingTunOnIf OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of backup tunnels protecting the specified
interface."
::= { cmplsFrrConstEntry 12 }
cmplsFrrConstNumProtectedTunOnIf OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunnels protected on this interface."
::= { cmplsFrrConstEntry 13 }
-- Fast Reroute Log Table
cmplsFrrLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF CMplsFrrLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The fast reroute log table records fast reroute events such
as protected links going up or down or the FRR feature
kicking in."
::= { cmplsFrrGeneralObjects 2 }
cmplsFrrLogEntry OBJECT-TYPE
SYNTAX CMplsFrrLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created to describe one fast
reroute event. Entries in this table are only created and
destroyed by the agent implementation. The maximum number
of entries in this log is governed by the scalar."
INDEX { cmplsFrrLogIndex }
::= { cmplsFrrLogTable 1 }
CMplsFrrLogEntry ::= SEQUENCE {
cmplsFrrLogIndex Unsigned32,
cmplsFrrLogEventTime TimeStamp,
cmplsFrrLogInterface InterfaceIndexOrZero,
cmplsFrrLogEventType INTEGER,
cmplsFrrLogEventDuration TimeTicks,
cmplsFrrLogEventReasonString OCTET STRING
}
cmplsFrrLogIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies a fast reroute event entry."
::= { cmplsFrrLogEntry 1 }
cmplsFrrLogEventTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the amount of time ticks since this
event occured."
::= { cmplsFrrLogEntry 2 }
cmplsFrrLogInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates which interface was affected by this
FRR event. This value may be set to 0 if
mplsFrrConstProtectionMethod is set to oneToOneBackup(0)."
::= { cmplsFrrLogEntry 3 }
cmplsFrrLogEventType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
protected(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes what type of fast reroute event
occured."
::= { cmplsFrrLogEntry 4 }
cmplsFrrLogEventDuration OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the duration of this event."
::= { cmplsFrrLogEntry 5 }
cmplsFrrLogEventReasonString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an implementation-specific explanation
of the event."
::= { cmplsFrrLogEntry 6 }
--
-- One-to-One Specific Tables
--
-- Tables in this section pertain only to the 1-1
-- style of FRR.
--
-- MPLS Fast Reroute Point of Local Repair table
--
-- mplsFrrOne2OnePlrTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF MplsFrrOne2OnePlrEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This table shows the lists of PLRs that initiated detour LSPs
-- which affect this node."
-- ::= { mplsFrr1to1Objects 1 }
--
-- mplsFrrOne2OnePlrEntry OBJECT-TYPE
-- SYNTAX MplsFrrOne2OnePlrEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "An entry in this table represents a PLR together with its
-- detour instance. An entry in this table is only created by an
-- SNMP agent as instructed by an MPLS signaling protocol."
-- INDEX { mplsFrrOne2OnePlrTunIdIdx,
-- mplsFrrOne2OnePlrTunInst,
-- mplsFrrOne2OnePlrTunIngrLSRId,
-- mplsFrrOne2OnePlrTunEgrLSRId,
-- mplsFrrOne2OnePlrId,
-- mplsFrrOne2OnePlrDetourInstance }
-- ::= { mplsFrrOne2OnePlrTable 1 }
--
-- MplsFrrOne2OnePlrEntry ::= SEQUENCE {
-- mplsFrrOne2OnePlrTunIdIdx MplsTunnelIndex,
-- mplsFrrOne2OnePlrTunInst MplsTunnelInstanceIndex,
-- mplsFrrOne2OnePlrTunIngrLSRId MplsLsrIdentifier,
-- mplsFrrOne2OnePlrTunEgrLSRId MplsLsrIdentifier,
-- mplsFrrOne2OnePlrId MplsLsrIdentifier,
-- mplsFrrOne2OnePlrDetourInstance MplsTunnelInstanceIndex,
-- mplsFrrOne2OnePlrSenderAddrType InetAddressType,
-- mplsFrrOne2OnePlrSenderAddr InetAddress,
-- mplsFrrOne2OnePlrAvoidNAddrType InetAddressType,
-- mplsFrrOne2OnePlrAvoidNAddr InetAddress,
-- mplsFrrOne2OnePlrDetourIndex MplsFrrDetourIndex
-- }
--
-- mplsFrrOne2OnePlrTunIdIdx OBJECT-TYPE
-- SYNTAX MplsTunnelIndex
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Uniquely identifies a row from the mplsTunnelEntry."
-- ::= { mplsFrrOne2OnePlrEntry 1 }
--
-- mplsFrrOne2OnePlrTunInst OBJECT-TYPE
-- SYNTAX MplsTunnelInstanceIndex
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Uniquely identifies an instance of a tunnel from
-- the mplsTunnelEntry. "
-- ::= { mplsFrrOne2OnePlrEntry 2 }
--
-- mplsFrrOne2OnePlrTunIngrLSRId OBJECT-TYPE
-- SYNTAX MplsLsrIdentifier
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The purpose of this object is to uniquely identity a
-- tunnel within a network. When the MPLS signalling
-- protocol is rsvp(2) this value SHOULD mimic the
-- Extended Tunnel Id field in the SESSION object.
-- When the MPLS signalling protocol is crldp(3) this
-- value SHOULD mimic the Ingress LSR Router ID field
-- in the LSPID TLV object."
-- REFERENCE
-- "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
-- Awduche et al, RFC 3209, December 2001
-- 2. Constraint-Based LSP Setup using LDP, Jamoussi
-- (Editor), RFC 3212, January 2002"
-- ::= { mplsFrrOne2OnePlrEntry 3 }
--
-- mplsFrrOne2OnePlrTunEgrLSRId OBJECT-TYPE
-- SYNTAX MplsLsrIdentifier
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Specifies the egress LSR ID."
-- ::= { mplsFrrOne2OnePlrEntry 4 }
--
-- mplsFrrOne2OnePlrId OBJECT-TYPE
-- SYNTAX MplsLsrIdentifier
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This value represents the PLR that has initiated a detour LSP
-- to protect a tunnel instance."
-- ::= { mplsFrrOne2OnePlrEntry 5 }
--
-- mplsFrrOne2OnePlrDetourInstance OBJECT-TYPE
-- SYNTAX MplsTunnelInstanceIndex
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This value represents an instance of a detour initiated by this
-- PLR."
-- ::= { mplsFrrOne2OnePlrEntry 6 }
--
-- mplsFrrOne2OnePlrSenderAddrType OBJECT-TYPE
-- SYNTAX InetAddressType
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "Denotes the address type of this detour instance'S sender
-- address."
-- DEFVAL { ipv4 }
-- ::= { mplsFrrOne2OnePlrEntry 7 }
--
-- mplsFrrOne2OnePlrSenderAddr OBJECT-TYPE
-- SYNTAX InetAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
--"If mplsFrrOne2OnePlrSenderAddrType is set to ipv4(1), then this value
-- will contain the IPv4 address of this detour instance's sender.
-- This object is otherwise insignificant and should contain a
-- value of 0."
-- ::= { mplsFrrOne2OnePlrEntry 8 }
--
-- mplsFrrOne2OnePlrAvoidNAddrType OBJECT-TYPE
-- SYNTAX InetAddressType
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Denotes the address type of the node that this PLR tries to
-- avoid."
-- DEFVAL { ipv4 }
-- ::= { mplsFrrOne2OnePlrEntry 9 }
--
-- mplsFrrOne2OnePlrAvoidNAddr OBJECT-TYPE
-- SYNTAX InetAddress
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "If mplsFrrOne2OnePlrAvoidNAddrType is set to ipv4(1), then this
-- value will contain the IPv4 address of the avoid node. This
-- object is otherwise insignificant and should contain a value of
-- 0."
-- ::= { mplsFrrOne2OnePlrEntry 10 }
--
-- mplsFrrOne2OnePlrDetourIndex OBJECT-TYPE
-- SYNTAX MplsFrrDetourIndex
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The index of the corresponding detour LSP in the
-- mplsFrrDetourTable."
-- ::= { mplsFrrOne2OnePlrEntry 11 }
--
--
-- MPLS One-To-One Fast Reroute Detour table.
--
-- mplsFrrDetourTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF MplsFrrDetourEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This table shows all detour LSPs together with their
-- characteristics."
-- ::= { mplsFrr1to1Objects 2 }
--
-- mplsFrrDetourEntry OBJECT-TYPE
-- SYNTAX MplsFrrDetourEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "An entry in this table represents a detour. An entry in this
-- table is only created by an SNMP agent as instructed by an MPLS
-- signaling protocol. "
-- INDEX {
-- mplsFrrOne2OnePlrTunIdIdx,
-- mplsFrrOne2OnePlrTunInst,
-- mplsFrrOne2OnePlrTunIngrLSRId,
-- mplsFrrOne2OnePlrTunEgrLSRId,
-- mplsFrrDetourIndexIndex
-- }
-- ::= { mplsFrrDetourTable 1 }
--
-- MplsFrrDetourEntry ::= SEQUENCE {
-- mplsFrrDetourIndexIndex MplsFrrDetourIndex,
-- mplsFrrDetourActive TruthValue,
-- mplsFrrDetourMerging INTEGER,
-- mplsFrrDetourMergedDetourIndex MplsFrrDetourIndex,
-- mplsFrrDetourCreationTime TimeStamp
-- }
--
-- mplsFrrDetourIndexIndex OBJECT-TYPE
-- SYNTAX MplsFrrDetourIndex
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Uniquely identifies this detour."
-- ::= { mplsFrrDetourEntry 1 }
--
-- mplsFrrDetourActive OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Indicates whether or not the main LSP has switched over to this
-- detour LSP. This is only relevant when the mplsFrrDetourRole is
-- head(1)."
-- ::= { mplsFrrDetourEntry 2 }
--
-- mplsFrrDetourMerging OBJECT-TYPE
-- SYNTAX INTEGER { none(0),
-- protectedTunnel(1),
-- detour(2)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This value represents whether or not this detour is merged.
-- This value MUST be set to none(0) if this detour is not merged.
-- This value MUST be set to protectedTunnel(1) if this detour is
-- merged with the protected tunnel. This value MUST be set to
-- detour(2) if this detour is merged with another detour
-- protecting the same tunnel."
-- ::= { mplsFrrDetourEntry 3 }
--
-- mplsFrrDetourMergedDetourIndex OBJECT-TYPE
-- SYNTAX MplsFrrDetourIndex
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This value represents the detour entry with which this detour
-- is merged. This object is only valid when mplsFrrDetourMerging
-- is set to detour(2)."
-- ::= { mplsFrrDetourEntry 4 }
--
-- mplsFrrDetourCreationTime OBJECT-TYPE
-- SYNTAX TimeStamp
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Specifies the value of SysUpTime when the detour came into
-- existence."
-- ::= { mplsFrrDetourEntry 5 }
--
-- Facility-based FRR-specific Tables
--
cmplsFrrFacRouteDBTable OBJECT-TYPE
SYNTAX SEQUENCE OF CMplsFrrFacRouteDBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mplsFrrFacRouteDBTable provides information about the
fast reroute database. Each entry belongs to an interface,
protecting backup tunnel and protected tunnel. MPLS
interfaces defined on this node are protected by backup
tunnels and are indexed by mplsFrrFacRouteProtectedIndex.
Backup tunnels defined to protect the tunnels traversing an
interface, and are indexed by
mplsFrrFacRouteProtectingTunIndex. Note that the tunnel
instance index is not required, since it is implied to be 0,
which indicates the tunnel head interface for the protecting
tunnel. The protecting tunnel is defined to exist on the PLR
in the FRR specification. Protected tunnels are the LSPs that
traverse the protected link. These LSPs are uniquely
identified by mplsFrrFacRouteProtectedTunIndex,
mplsFrrFacRouteProtectedTunInstance,
mplsFrrFacRouteProtectedTunIngressLSRId, and
mplsFrrFacRouteProtectedTunEgressLSRId."
REFERENCE
"Srinivansan, C., and A. Viswanathan, T. Nadeau, MPLS Traffic
Engineering Management Information Base Using SMIv2,
draft-ietf-mpls-te-mib-06.txt "
::= { cmplsFrrFacObjects 1 }
cmplsFrrFacRouteDBEntry OBJECT-TYPE
SYNTAX CMplsFrrFacRouteDBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the mplsFrrDBTable represents a single protected
LSP, protected by a backup tunnel and defined for a specific
protected interface. Note that for brevity, managers should
consult the mplsTunnelTable present in the MPLS-TE MIB for
additional information about the protecting and protected
tunnels, and the ifEntry in the IF-MIB for the protected
interface."
REFERENCE
"Srinivansan, C., and A. Viswanathan, T. Nadeau, MPLS Label
Switch Router Management Information Base Using SMIv2,
draft-ietf-mpls-lsr-mib-07.txt Srinivansan, C., and A.
Viswanathan, T. Nadeau, MPLS Traffic Engineering Management
Information Base Using SMIv2, draft-ietf-mpls-te-mib-
06.txt."
INDEX {
cmplsFrrFacRouteProtectedIfIndex, -- from MPLS-TE MIB
cmplsFrrFacRouteProtectingTunIndex, -- from MPLS-TE MIB
cmplsFrrFacRouteProtectedTunIndex, -- from MPLS-TE MIB
cmplsFrrFacRouteProtectedTunInstance, -- mplsTunnelTable
cmplsFrrFacRouteProtectedTunIngressLSRId, -- Tunnels must exist
cmplsFrrFacRouteProtectedTunEgressLSRId } -- a priori
::= { cmplsFrrFacRouteDBTable 1 }
CMplsFrrFacRouteDBEntry ::= SEQUENCE {
cmplsFrrFacRouteProtectedIfIndex InterfaceIndex,
cmplsFrrFacRouteProtectingTunIndex MplsTunnelIndex,
cmplsFrrFacRouteProtectedTunIndex MplsTunnelIndex,
cmplsFrrFacRouteProtectedTunInstance MplsTunnelInstanceIndex,
cmplsFrrFacRouteProtectedTunIngressLSRId MplsLsrIdentifier,
cmplsFrrFacRouteProtectedTunEgressLSRId MplsLsrIdentifier,
cmplsFrrFacRouteProtectedTunStatus INTEGER,
cmplsFrrFacRouteProtectingTunResvBw MplsBitRate,
cmplsFrrFacRouteProtectingTunProtectionType INTEGER
}
cmplsFrrFacRouteProtectedIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies the interface configured for FRR protection."
::= { cmplsFrrFacRouteDBEntry 1 }
cmplsFrrFacRouteProtectingTunIndex OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies the mplsTunnelEntry primary index for
the tunnel head interface designated to protect the
interface as specified in the mplsFrrFacRouteIfProtectedIndex
(and all of the tunnels using this interface)."
::= { cmplsFrrFacRouteDBEntry 2 }
cmplsFrrFacRouteProtectedTunIndex OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies an mplsTunnelEntry that is
being protected by FRR."
::= { cmplsFrrFacRouteDBEntry 3 }
cmplsFrrFacRouteProtectedTunInstance OBJECT-TYPE
SYNTAX MplsTunnelInstanceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies an mplsTunnelEntry that is
being protected by FRR."
::= { cmplsFrrFacRouteDBEntry 4 }
cmplsFrrFacRouteProtectedTunIngressLSRId OBJECT-TYPE
SYNTAX MplsLsrIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies an mplsTunnelEntry that is
being protected by FRR."
REFERENCE
"1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
Awduche et al, RFC 3209, December 2001
2. Constraint-Based LSP Setup using LDP, Jamoussi
(Editor), RFC 3212, January 2002"
::= { cmplsFrrFacRouteDBEntry 5 }
cmplsFrrFacRouteProtectedTunEgressLSRId OBJECT-TYPE
SYNTAX MplsLsrIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies an mplsTunnelEntry that is
being protected by FRR."
::= { cmplsFrrFacRouteDBEntry 6 }
cmplsFrrFacRouteProtectedTunStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
ready(2),
partial(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the state of the protected tunnel.
active This tunnel's label has been placed in the
LFIB and is ready to be applied to incoming
packets.
ready - This tunnel's label entry has been created but is
not yet in the LFIB.
partial - This tunnel's label entry as not been fully
created."
::= { cmplsFrrFacRouteDBEntry 7 }
cmplsFrrFacRouteProtectingTunResvBw OBJECT-TYPE
SYNTAX MplsBitRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the amount of bandwidth in megabytes per second
that is actually reserved by the backup tunnel for
facility backup. This value is repeated here from the MPLS-
TE MIB because the tunnel entry will reveal the bandwidth
reserved by the signaling protocol, which is typically 0
for backup tunnels so as to not over-book bandwidth.
However, internal reservations are typically made on the
PLR, thus this value should be revealed here."
::= { cmplsFrrFacRouteDBEntry 8 }
cmplsFrrFacRouteProtectingTunProtectionType OBJECT-TYPE
SYNTAX INTEGER { linkProtection(0),
nodeProtection(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates type of the resource protection."
DEFVAL { nodeProtection }
::= { cmplsFrrFacRouteDBEntry 9 }
-- Notifications
-- Ed Note: Currently these notifications only apply to
-- Facility-based FRR. Do we need to define
-- additional notifications for One2One?
cmplsFrrProtected NOTIFICATION-TYPE
OBJECTS { cmplsFrrConstNumProtectingTunOnIf,
cmplsFrrConstNumProtectedTunOnIf,
cmplsFrrConstBandwidth
}
STATUS current
DESCRIPTION
"This notification is generated when a tunnel running over an
interface as specified in the mplsFrrConstTable is initially
protected by the backup tunnel also specified in the
cmplsFrrConstTable. This notification should not be generated
for each subsequent tunnel that is backed up by the FRR feature
on this LSR, as this may result in potential scaling issues
with regard to LSR performance and network loading. Note also
that notifications MUST be generated in accordance with the
cmplsFrrNotifMaxRate."
::= { cmplsFrrNotif 1 }
cmplsFrrUnProtected NOTIFICATION-TYPE
OBJECTS { cmplsFrrConstNumProtectingTunOnIf,
cmplsFrrConstNumProtectedTunOnIf,
cmplsFrrConstBandwidth
}
STATUS current
DESCRIPTION
"This notification is generated when the final tunnel that is
being protected by a backup tunnel as specified in the
cmplsFrrConstTable is restored to normal operation. This
notification should not be generated for each restored tunnel,
as this may result in potential scaling issues with regard to
LSR performance and network loading. Note also that
notifications MUST be generated in accordance with the
cmplsFrrNotifMaxRate."
::= { cmplsFrrNotif 2 }
-- Module Conformance Statement
cmplsFrrGroups
OBJECT IDENTIFIER ::= {cmplsFrrConformance 1 }
cmplsFrrCompliances
OBJECT IDENTIFIER ::= {cmplsFrrConformance 2 }
cmplsFrrModuleCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Compliance statements for agents that support the MPLS FRR
MIB."
MODULE
MANDATORY-GROUPS {
cmplsFrrScalarGroup,
cmplsFrrConstGroup,
cmplsFrrLogGroup
}
-- GROUP mplsFrrOne2OnePLRDetourGroup
-- DESCRIPTION
-- "This group is mandatory for devices which support
-- the one-to-one FRR mechanism, and is optional for
-- those which do not."
--
-- GROUP mplsFrrOne2OnePlrGroup
-- DESCRIPTION
-- "This group is mandatory for devices which support
-- the one-to-one FRR mechanism, and is optional for
-- those which do not."
GROUP cmplsFrrFacRouteDBGroup
DESCRIPTION
"This group is mandatory for devices which support
the Facility Backup FRR mechanism, and is optional
for those which do not."
GROUP cmplsFrrNotifGroup
DESCRIPTION
"This group is mandatory for devices which support
the Facility Backup FRR mechanism, and is optional
for those which do not."
-- cmplsFrrConstTable
OBJECT cmplsFrrConstSetupPrio
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmplsFrrConstHoldingPrio
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmplsFrrConstInclAnyAffinity
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmplsFrrConstInclAllAffinity
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmplsFrrConstExclAllAffinity
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmplsFrrConstHopLimit
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmplsFrrConstBandwidth
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmplsFrrConstRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmplsFrrConstNumProtectingTunOnIf
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmplsFrrConstNumProtectedTunOnIf
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { cmplsFrrCompliances 1 }
cmplsFrrModuleComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statements for agents that support the MPLS FRR
MIB."
MODULE
MANDATORY-GROUPS {
cmplsFrrScalarGroup,
cmplsFrrConstGroup,
cmplsFrrLogGroup
}
-- GROUP mplsFrrOne2OnePLRDetourGroup
-- DESCRIPTION
-- "This group is mandatory for devices which support
-- the one-to-one FRR mechanism, and is optional for
-- those which do not."
--
-- GROUP mplsFrrOne2OnePlrGroup
-- DESCRIPTION
-- "This group is mandatory for devices which support
-- the one-to-one FRR mechanism, and is optional for
-- those which do not."
GROUP cmplsFrrFacRouteDBGroup
DESCRIPTION
"This group is mandatory for devices which support
the Facility Backup FRR mechanism, and is optional
for those which do not."
GROUP cmplsFrrNotifGroupRev1
DESCRIPTION
"This group is mandatory for devices which support
the Facility Backup FRR mechanism, and is optional
for those which do not."
-- cmplsFrrConstTable
OBJECT cmplsFrrConstSetupPrio
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmplsFrrConstHoldingPrio
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmplsFrrConstInclAnyAffinity
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmplsFrrConstInclAllAffinity
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmplsFrrConstExclAllAffinity
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmplsFrrConstHopLimit
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmplsFrrConstBandwidth
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmplsFrrConstRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmplsFrrConstNumProtectingTunOnIf
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmplsFrrConstNumProtectedTunOnIf
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { cmplsFrrCompliances 2 }
-- Units of conformance
cmplsFrrScalarGroup OBJECT-GROUP
OBJECTS {
cmplsFrrDetourIncoming,
cmplsFrrDetourOutgoing,
cmplsFrrDetourOriginating,
cmplsFrrSwitchover,
cmplsFrrNumOfConfIfs,
cmplsFrrActProtectedIfs,
cmplsFrrConfProtectingTuns,
cmplsFrrActProtectedTuns,
cmplsFrrActProtectedLSPs,
cmplsFrrConstProtectionMethod,
cmplsFrrNotifsEnabled,
cmplsFrrLogTableMaxEntries,
cmplsFrrLogTableCurrEntries,
cmplsFrrNotifMaxRate
}
STATUS current
DESCRIPTION
"Objects that are required to gather fast reroute statistics."
::= { cmplsFrrGroups 1 }
cmplsFrrConstGroup OBJECT-GROUP
OBJECTS {
cmplsFrrConstProtectionMethod,
cmplsFrrConstSetupPrio,
cmplsFrrConstHoldingPrio,
cmplsFrrConstInclAnyAffinity,
cmplsFrrConstInclAllAffinity,
cmplsFrrConstExclAllAffinity,
cmplsFrrConstHopLimit,
cmplsFrrConstBandwidth,
cmplsFrrConstRowStatus,
cmplsFrrConstNumProtectingTunOnIf,
cmplsFrrConstNumProtectedTunOnIf
}
STATUS current
DESCRIPTION
"Objects that are required to configure fast reroute constraints
at the ingress LSR of the tunnel that requires fast reroute
service."
::= { cmplsFrrGroups 2 }
-- mplsFrrOne2OnePLRDetourGroup OBJECT-GROUP
-- OBJECTS {
-- mplsFrrDetourActive,
-- mplsFrrDetourMerging,
-- mplsFrrDetourMergedDetourIndex,
-- mplsFrrDetourCreationTime
-- }
-- STATUS current
-- DESCRIPTION
-- "Objects that are required to present the detour LSP information
-- at the detour ingress, transit and egress LSRs."
-- ::= { mplsFrrGroups 3 }
cmplsFrrLogGroup OBJECT-GROUP
OBJECTS { cmplsFrrLogEventTime,
cmplsFrrLogInterface,
cmplsFrrLogEventType,
cmplsFrrLogEventDuration,
cmplsFrrLogEventReasonString
}
STATUS current
DESCRIPTION
"Objects that are required to represent FRR logging information
at the detour ingress, transit and egress LSRs."
::= { cmplsFrrGroups 4 }
-- mplsFrrOne2OnePlrGroup OBJECT-GROUP
-- OBJECTS {
-- mplsFrrOne2OnePlrSenderAddrType,
-- mplsFrrOne2OnePlrSenderAddr,
-- mplsFrrOne2OnePlrAvoidNAddrType,
-- mplsFrrOne2OnePlrAvoidNAddr,
-- mplsFrrOne2OnePlrDetourIndex
-- }
-- STATUS current
-- DESCRIPTION
-- "Objects that are required to represent the FRR
-- One-2-One PLR information."
-- ::= { mplsFrrGroups 5 }
cmplsFrrFacRouteDBGroup OBJECT-GROUP
OBJECTS { cmplsFrrFacRouteProtectedTunStatus,
cmplsFrrFacRouteProtectingTunResvBw,
cmplsFrrFacRouteProtectingTunProtectionType
}
STATUS current
DESCRIPTION
"Objects that are required to represent the FRR
Facility Route Database information."
::= { cmplsFrrGroups 6 }
cmplsFrrNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cmplsFrrProtected
}
STATUS deprecated
DESCRIPTION
"Objects that are required to represent FRR notifications."
::= { cmplsFrrGroups 7 }
cmplsFrrNotifGroupRev1 NOTIFICATION-GROUP
NOTIFICATIONS {
cmplsFrrProtected,
cmplsFrrUnProtected
}
STATUS current
DESCRIPTION
"Objects that are required to represent FRR notifications."
::= { cmplsFrrGroups 8 }
END
Reference in New Issue View Git Blame Copy Permalink