snmp_mib_archive/CISCO-FC-MULTICAST-MIB.my 2

-- *********************************************************************
-- CISCO-FC-MULTICAST-MIB.my: Fibre Channel Multicast Mib
--
-- July 2004, Vinay Gaonkar
--
-- Copyright (c) 2004 by cisco Systems, Inc.
-- All rights reserved.
-- 
-- *********************************************************************

CISCO-FC-MULTICAST-MIB DEFINITIONS ::= BEGIN

IMPORTS        
     MODULE-IDENTITY, OBJECT-TYPE        FROM SNMPv2-SMI
     MODULE-COMPLIANCE, OBJECT-GROUP     FROM SNMPv2-CONF
     TEXTUAL-CONVENTION,RowStatus        FROM SNMPv2-TC
     ciscoMgmt                           FROM CISCO-SMI
     vsanIndex                           FROM CISCO-VSAN-MIB
     DomainIdOrZero                      FROM CISCO-ST-TC;


ciscoFcMulticastMIB MODULE-IDENTITY

        LAST-UPDATED "200410070000Z"
        ORGANIZATION "Cisco Systems Inc. "
        CONTACT-INFO
                "     Cisco Systems
                      Customer Service
                Postal: 170 W Tasman Drive
                      San Jose, CA  95134
                      USA
                Tel: +1 800 553 -NETS
                E-mail: cs-san@cisco.com"
        DESCRIPTION
                "MIB module for monitoring and configuring 
                Fibre Channel Multicast feature."

        REVISION   "200410070000Z"
        DESCRIPTION
                "Initial version of this MIB module."

        ::= { ciscoMgmt 435 }

ciscoFcMulticastNotifications OBJECT IDENTIFIER  
                              ::= { ciscoFcMulticastMIB 0 }
ciscoFcMulticastMIBObjects OBJECT IDENTIFIER     
                              ::= { ciscoFcMulticastMIB 1 }
ciscoFcMulticaseConformance OBJECT IDENTIFIER    
                              ::= { ciscoFcMulticastMIB 2 }


cfmConfiguration OBJECT IDENTIFIER     
                              ::= {ciscoFcMulticastMIBObjects 1}

--
-- Textual Conventions
--
CfmMulticastRootMode   ::= TEXTUAL-CONVENTION
        STATUS current
        DESCRIPTION
               "The multicast Root Mode.
                principalSwitch       - principal switch is used as the
                                        root for multicast tree 
                                        computation.
                lowestDomainIdSwitch  - lowest domainId switch is used 
                                        as the root for mulitcast tree 
                                        computation."
        REFERENCE
              "Refer to FC-SW-2 REV 5.4 for information on principal 
              switch and lowest domain id switch."
        SYNTAX    INTEGER {
                      principalSwitch (1),
                      lowestDomainSwitch (2)
                  }

--
-- Multicase root configuration
--

cfmMulticastRootTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CfmMulticastRootEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
           "This table allows the users to configure and monitor the
           FC Multicast parameters on all the VSANs configured on the 
           local switch.

           An entry is automatically created in this table if there
           is an entry in the fspfTable (defined in CISCO-FSPF-MIB) and
           fspfOperStatus (defined in CISCO-FSPF-MIB) for that
           entry is 'up'.
 
           An entry is automatically deleted from this table if
           either :
            a) the fspfOperStatus in the fspfTable entry for the 
               corresponding VSAN changes to 'down'.
                                 or
            b) the fspfTable entry for the corresponding VSAN is
               deleted.

           Entries in this table can be created via 
           cfmMulticastRootRowStatus only as the means to specify 
           non-default parameter values for a VSAN either because the
           VSAN is suspended or fspfOperStatus (defined in 
           CISCO-FSPF-MIB) for that VSAN is 'down' (VSAN state is 
           indicated by object vsanOperState which is defined in 
           CISCO-VSAN-MIB).

           So an entry in this table exists when one or both of these
           conditions holds:
           - one or more configuration parameters have non-default
             values for a VSAN which is either suspended or the 
             fspfOperStatus for that VSAN is down.  
           - the fspfOperStatus for VSAN is 'up'.

           This has a number of consequences:
           - an entry exists for a suspended VSAN whenever that VSAN 
             has non-default parameters.
           - an entry cannot be created (via cfmMulticastRootRowStatus) 
             for a VSAN with default parameters; instead, the agent
             creates/deletes an entry for a VSAN with default
             parameters according to whether the fspfOperStatus is 'up' 
             or 'down'.
           - an entry can not be created via cfmMulticastRootRowStatus 
             unless non-default parameter values are (simultaneously) 
             configured for a VSAN whose fspfOperStatus is 'down'.
           - deleting an entry via cfmMulticastRootRowStatus when either
             the VSAN is suspended and configured with non-default 
             values or the VSAN is active, is equivalent to resetting
             its parameters to their default values.
             If an entry is configured with default-values and the 
             VSAN is in suspended state, then the entry would be 
             deleted."
        REFERENCE
           "For information FC multicast/root, refer to Fibre Channel 
           Switch Fabric-2  (FC-SW-2 REV 5.4) and Fibre Channel Switch 
           Fabric-3  (FC-SW-3 REV 6.6)."
    ::= { cfmConfiguration 1 }

cfmMulticastRootEntry OBJECT-TYPE
    SYNTAX      CfmMulticastRootEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
           "This entry contains the multicase parameters on this VSAN."
    INDEX       { vsanIndex }
    ::= { cfmMulticastRootTable 1 }

CfmMulticastRootEntry ::= SEQUENCE  {
    cfmMulticastRootConfigMode  CfmMulticastRootMode,
    cfmMulticastRootOperMode    CfmMulticastRootMode,
    cfmMulticastRootDomainId    DomainIdOrZero,
    cfmMulticastRootRowStatus   RowStatus
}

cfmMulticastRootConfigMode OBJECT-TYPE
    SYNTAX      CfmMulticastRootMode
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "The configured multicast root mode on this VSAN."
    DEFVAL { principalSwitch }
    ::= { cfmMulticastRootEntry 1 }

cfmMulticastRootOperMode OBJECT-TYPE
    SYNTAX      CfmMulticastRootMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The operational multicast root mode on this VSAN."
    ::= { cfmMulticastRootEntry 2 }

cfmMulticastRootDomainId OBJECT-TYPE
    SYNTAX      DomainIdOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "The domainID of the multicast root on this VSAN."
    ::= { cfmMulticastRootEntry 3 }

cfmMulticastRootRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "The status of conceptual row on this VSAN.

           This object can be used to create an entry only if
           either the corresponding VSAN is suspended or the
           fspfOperStatus is down. If the VSAN is either 
           not-existent or fspfOperStatus is up, the create will fail."
    ::= { cfmMulticastRootEntry 4 }
--
-- Conformance
--
ciscoFcMulticastMIBCompliances
       OBJECT IDENTIFIER ::= { ciscoFcMulticaseConformance 1 }
ciscoFcMulticastMIBGroups
       OBJECT IDENTIFIER ::= { ciscoFcMulticaseConformance 2 }

ciscoFcMulticastMIBCompliance MODULE-COMPLIANCE
    STATUS   current
    DESCRIPTION
           "The compliance statement for entities which implement the 
           CISCO-FC-MULTICAST-MIB."
    MODULE 
          MANDATORY-GROUPS { cfmConfigurationGroup}

    ::= { ciscoFcMulticastMIBCompliances 1 }


-- Units of Conformance

cfmConfigurationGroup  OBJECT-GROUP
    OBJECTS  { cfmMulticastRootConfigMode,
               cfmMulticastRootOperMode,
               cfmMulticastRootDomainId,
               cfmMulticastRootRowStatus       
             }
    STATUS   current
    DESCRIPTION
           "A collection of objects for FC multicast 
           configuration."
    ::= { ciscoFcMulticastMIBGroups 1 }
END