MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-DS1-CAPABILITY.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1075 lines
31 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-DS1-CAPABILITY
--
-- AGENT-CAPABILITIES MIB for DS1-MIB for CISCO Products
--
-- December 2003, Yizhong Shen
--
-- Copyright(c) 2002-2007 by Cisco Systems Inc.
--
-- ****************************************************************
CISCO-DS1-CAPABILITY DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY
FROM SNMPv2-SMI
AGENT-CAPABILITIES
FROM SNMPv2-CONF
ciscoAgentCapability
FROM CISCO-SMI
DisplayString
FROM SNMPv2-TC;
ciscoDs1Capability MODULE-IDENTITY
LAST-UPDATED "200710310000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"The agent capabilities for DS1-MIB for Cisco Products Series.
- ciscoDs1AxsmeCapabilityV3R00 is for
Enhanced ATM Switch Service Module(AXSM-E), and
Enhanced Processor Switch Module 1(PXM1E) uplink.
- ciscoDs1CapabilityV5R00 is for Voice Switch
Service Module(VXSM) and MPSM Module Release 5.0.0."
REVISION "200710310000Z"
DESCRIPTION
"Added VARIATION for dsx1LineStatusChangeTrapEnable to
agent capability statement ciscoDs1CapabilityMARsV12R5T
and ciscoDs1CapabilityAS5xxxV12R5T"
REVISION "200709100000Z"
DESCRIPTION
"Added ciscoDs1CapabilityV5R500 for defining capability for
VXSM support in MGX8880 release 5.5.0."
REVISION "200705110000Z"
DESCRIPTION
"Added ciscoDs1CapabilityMARsV12R5T for 2800, 3800, 3700 series
routers and IAD2430 platforms.
Added ciscoDs1CapabilityAS5xxxV12R5T for AS5xxx platforms."
REVISION "200606160000Z"
DESCRIPTION
"Added ciscoDs1CapabilityV5R310 for VXSM support in
MGX8880 release 5.3.1."
REVISION "200507110000Z"
DESCRIPTION
"Added ciscoDs1CapabilityV5R100 for MPSM and VXSM support in
MGX8880 release 5.1.0."
REVISION "200312220000Z"
DESCRIPTION
"ciscoDs1CapabilityV5R00 added for MPSM and VXSM support."
REVISION "200204280000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoAgentCapability 273 }
ciscoDs1AxsmeCapabilityV3R00 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8850 Release 3.0"
STATUS current
DESCRIPTION "DS1-MIB Capabilities."
SUPPORTS DS1-MIB
INCLUDES {
ds1NearEndConfigGroup,
ds1NearEndStatisticsGroup,
ds1FarEndGroup
}
VARIATION dsx1LineType
SYNTAX INTEGER {
dsx1ESF(2),
dsx1E1CRCMF(7)
}
ACCESS read-only
DESCRIPTION
"Supported with limitation.
dsx1ESF(2) used only for T1 mode,
dsx1E1CRCMF(7) used only for E1 mode."
VARIATION dsx1LineCoding
SYNTAX INTEGER {
dsx1B8ZS(2),
dsx1HDB3(3)
}
ACCESS read-only
DESCRIPTION
"Supported with limitation.
dsx1B8ZS(2) used only for T1 mode,
dsx1HDB3(3) used only for E1 mode."
VARIATION dsx1SendCode
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1CircuitIdentifier
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1LoopbackConfig
SYNTAX INTEGER {
dsx1NoLoop(1),
dsx1LineLoop(3),
dsx1InwardLoop(5)
}
DESCRIPTION "Supported with limitation."
VARIATION dsx1SignalMode
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1Fdl
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1LineStatusLastChange
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1LineStatusChangeTrapEnable
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1LoopbackStatus
DESCRIPTION
"The agent only sets following bits:
1 dsx1NoLoopback
16 dsx1NearEndInwardLoopback
64 dsx1FarEndLineLoopback."
VARIATION dsx1Ds1ChannelNumber
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1Channelization
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1CurrentCSSs
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1CurrentBESs
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1CurrentDMs
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1IntervalCSSs
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1IntervalBESs
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1IntervalDMs
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1TotalCSSs
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1TotalBESs
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1TotalDMs
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1FarEndCurrentCSSs
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1FarEndCurrentBESs
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1FarEndCurrentDMs
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1FarEndIntervalCSSs
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1FarEndIntervalBESs
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1FarEndIntervalDMs
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1FarEndTotalCSSs
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1FarEndTotalBESs
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION dsx1FarEndTotalDMs
ACCESS not-implemented
DESCRIPTION "Not Supported."
::= { ciscoDs1Capability 1 }
ciscoDs1CapabilityV5R00 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8850 Release 5.0.0"
STATUS current
DESCRIPTION
"DS1 MIB capabilities for VXSM and
MPSM in release 5.0.0"
SUPPORTS DS1-MIB
INCLUDES {
ds1NearEndConfigGroup,
ds1NearEndStatisticsGroup,
ds1FarEndGroup,
ds1NearEndOptionalConfigGroup
}
VARIATION dsx1LineCoding
DESCRIPTION
"Only supported by T1/E1 card
(entPhysicalVendorType is cevVxsm48t1e1)."
VARIATION dsx1LineLength
SYNTAX INTEGER (0..200)
DESCRIPTION
"Supported with limited length only by T1/E1 card
(entPhysicalVendorType is cevVxsm48t1e1),
for T1 only."
VARIATION dsx1CircuitIdentifier
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1LineStatusLastChange
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1Ds1ChannelNumber
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1LineMode
DESCRIPTION
"Only supported by T1/E1 card
(entPhysicalVendorType is cevVxsm48t1e1),
for T1 only."
VARIATION dsx1LineBuildOut
DESCRIPTION
"Only supported by T1/E1 card
(entPhysicalVendorType is cevVxsm48t1e1),
for T1 only."
VARIATION dsx1CurrentDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1IntervalDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1TotalDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1FarEndCurrentDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1FarEndIntervalDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1FarEndTotalDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1LineType
SYNTAX INTEGER {
dsx1ESF(2),
dsx1D4(3),
dsx1E1(4),
dsx1E1CRC(5),
dsx1E1MF(6),
dsx1E1CRCMF(7),
dsx1E1Q50(12),
dsx1E1Q50CRC(13)
}
DESCRIPTION
"Limited data values are supported.
For T1, valid values are 2 and 3.
For E1, valud values are 4..7, 12 and 13."
VARIATION dsx1SendCode
SYNTAX INTEGER {
dsx1SendNoCode(1),
dsx1SendLineCode(2),
dsx1SendResetCode(4)
}
DESCRIPTION
"dsx1SendPayloadCode(3),
dsx1SendQRS(5),
dsx1Send511Pattern(6),
dsx1Send3in24Pattern(7),
dsx1SendOtherTestPattern(8)
are not supported on T1.
This object is not supported on E1."
VARIATION dsx1LoopbackConfig
SYNTAX INTEGER {
dsx1NoLoop(1),
dsx1LineLoop(3),
dsx1InwardLoop(5)
}
DESCRIPTION
"dsx1PayloadLoop(2), dsx1OtherLoop(4),
and dsx1DualLoop(6) are not supported."
VARIATION dsx1LineStatus
DESCRIPTION
"dsx1OtherFailure (bit 4096) is used to indicate
the line is in BERT testing."
VARIATION dsx1SignalMode
SYNTAX INTEGER {
none(1),
robbedBit(2),
bitOriented(3),
messageOriented(4)
}
DESCRIPTION
"other(5) is not supported.
For T1, valid values are 1, 2 and 4.
For E1, valid values are 1, 3 and 4."
VARIATION dsx1Fdl
SYNTAX INTEGER (2)
ACCESS read-only
DESCRIPTION
"Only dsx1AnsiT1403(2) is supported.
Set is not allowed."
VARIATION dsx1LineStatusChangeTrapEnable
DEFVAL { enabled }
DESCRIPTION "The initial value is enabled(1)."
VARIATION dsx1Channelization
SYNTAX INTEGER {
enabledDs0(2)
}
ACCESS read-only
DESCRIPTION
"disabled(1) and enabledDs1(3) are not supported.
Set is not allowed."
VARIATION dsx1FarEndCurrentTable
DESCRIPTION "It is not supported on E1."
VARIATION dsx1FarEndIntervalTable
DESCRIPTION "It is not supported on E1."
VARIATION dsx1FarEndTotalTable
DESCRIPTION "It is not supported on E1."
::= { ciscoDs1Capability 2 }
ciscoDs1CapabilityV5R100 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8880 Release 5.1.0"
STATUS current
DESCRIPTION
"DS1 MIB capabilities for VXSM and
MPSM in release 5.1.0"
SUPPORTS DS1-MIB
INCLUDES {
ds1NearEndConfigGroup,
ds1NearEndStatisticsGroup,
ds1FarEndGroup,
ds1NearEndOptionalConfigGroup
}
VARIATION dsx1LineCoding
DESCRIPTION
"Only supported by T1/E1 card
(entPhysicalVendorType is cevVxsm48t1e1)."
VARIATION dsx1LineLength
SYNTAX INTEGER (0..200)
DESCRIPTION
"Only supported by T1/E1 card
(entPhysicalVendorType is cevVxsm48t1e1),
for T1 only."
VARIATION dsx1CircuitIdentifier
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1LineStatusLastChange
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1Ds1ChannelNumber
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1LineMode
DESCRIPTION
"Only supported by T1/E1 card
(entPhysicalVendorType is cevVxsm48t1e1),
for T1 only."
VARIATION dsx1LineBuildOut
DESCRIPTION
"Only supported by T1/E1 card
(entPhysicalVendorType is cevVxsm48t1e1),
for T1 only."
VARIATION dsx1CurrentDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1IntervalDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1TotalDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1FarEndCurrentDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1FarEndIntervalDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1FarEndTotalDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1LineType
SYNTAX INTEGER {
dsx1ESF(2),
dsx1D4(3),
dsx1E1(4),
dsx1E1CRC(5),
dsx1E1MF(6),
dsx1E1CRCMF(7),
dsx1E1Q50(12),
dsx1E1Q50CRC(13)
}
DESCRIPTION
"Limited data values are supported.
For T1, valid values are 2 and 3.
For E1, valud values are 4..7, 12 and 13."
VARIATION dsx1SendCode
SYNTAX INTEGER {
dsx1SendNoCode(1),
dsx1SendLineCode(2),
dsx1SendResetCode(4)
}
DESCRIPTION
"dsx1SendPayloadCode(3),
dsx1SendQRS(5),
dsx1Send511Pattern(6),
dsx1Send3in24Pattern(7),
dsx1SendOtherTestPattern(8)
are not supported on T1.
This object is not supported on E1."
VARIATION dsx1LoopbackConfig
SYNTAX INTEGER {
dsx1NoLoop(1),
dsx1LineLoop(3),
dsx1InwardLoop(5)
}
DESCRIPTION
"dsx1PayloadLoop(2), dsx1OtherLoop(4),
and dsx1DualLoop(6) are not supported."
VARIATION dsx1LineStatus
DESCRIPTION
"dsx1OtherFailure (bit 4096) is used to indicate
the line is in BERT testing."
VARIATION dsx1SignalMode
SYNTAX INTEGER {
none(1),
robbedBit(2),
bitOriented(3)
}
DESCRIPTION
"other(5) is not supported.
For T1, valid values are 1, and 2
For E1, valid values are 1, and 3."
VARIATION dsx1Fdl
SYNTAX INTEGER (2)
ACCESS read-only
DESCRIPTION
"Only dsx1AnsiT1403(2) is supported.
Set is not allowed."
VARIATION dsx1LineStatusChangeTrapEnable
DEFVAL { enabled }
DESCRIPTION "The initial value is enabled(1)."
VARIATION dsx1Channelization
SYNTAX INTEGER {
enabledDs0(2)
}
ACCESS read-only
DESCRIPTION
"disabled(1) and enabledDs1(3) are not supported.
Set is not allowed."
VARIATION dsx1FarEndCurrentTable
DESCRIPTION "It is not supported on E1."
VARIATION dsx1FarEndIntervalTable
DESCRIPTION "It is not supported on E1."
VARIATION dsx1FarEndTotalTable
DESCRIPTION "It is not supported on E1."
::= { ciscoDs1Capability 3 }
ciscoDs1CapabilityV5R310 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8880 Release 5.3.1"
STATUS current
DESCRIPTION
"DS1 MIB capabilities for VXSM
in release 5.3.1"
SUPPORTS DS1-MIB
INCLUDES {
ds1NearEndConfigGroup,
ds1NearEndStatisticsGroup,
ds1FarEndGroup,
ds1NearEndOptionalConfigGroup
}
VARIATION dsx1LineCoding
DESCRIPTION
"Only supported by T1/E1 card
(entPhysicalVendorType is cevVxsm48t1e1)."
VARIATION dsx1LineLength
SYNTAX INTEGER (0..200)
DESCRIPTION
"Only supported by T1/E1 card
(entPhysicalVendorType is cevVxsm48t1e1),
for T1 only."
VARIATION dsx1CircuitIdentifier
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1LineStatusLastChange
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1Ds1ChannelNumber
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1LineMode
DESCRIPTION
"Only supported by T1/E1 card
(entPhysicalVendorType is cevVxsm48t1e1),
for T1 only."
VARIATION dsx1LineBuildOut
DESCRIPTION
"Only supported by T1/E1 card
(entPhysicalVendorType is cevVxsm48t1e1),
for T1 only."
VARIATION dsx1CurrentDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1IntervalDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1TotalDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1FarEndCurrentDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1FarEndIntervalDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1FarEndTotalDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1LineType
SYNTAX INTEGER {
dsx1ESF(2),
dsx1D4(3),
dsx1E1(4),
dsx1E1CRC(5),
dsx1E1MF(6),
dsx1E1CRCMF(7),
dsx1E1Q50(12),
dsx1E1Q50CRC(13)
}
DESCRIPTION
"Limited data values are supported.
For T1, valid values are 2 and 3.
For E1, valud values are 4..7, 12 and 13."
VARIATION dsx1SendCode
SYNTAX INTEGER {
dsx1SendNoCode(1),
dsx1SendLineCode(2),
dsx1SendResetCode(4)
}
DESCRIPTION
"dsx1SendPayloadCode(3),
dsx1SendQRS(5),
dsx1Send511Pattern(6),
dsx1Send3in24Pattern(7),
dsx1SendOtherTestPattern(8)
are not supported on T1.
This object is not supported on E1."
VARIATION dsx1LoopbackConfig
SYNTAX INTEGER {
dsx1NoLoop(1),
dsx1LineLoop(3),
dsx1InwardLoop(5)
}
DESCRIPTION
"dsx1PayloadLoop(2), dsx1OtherLoop(4),
and dsx1DualLoop(6) are not supported."
VARIATION dsx1LineStatus
DESCRIPTION
"dsx1OtherFailure (bit 4096) is used to indicate
the line is in BERT testing."
VARIATION dsx1SignalMode
SYNTAX INTEGER {
none(1),
robbedBit(2),
bitOriented(3),
other(5)
}
DESCRIPTION
"other(5) is only supported at
VXSM xGCP and T1.
For T1, valid values are 1, 2 and
5 (xGCP only).
For E1, valid values are 1 and 3."
VARIATION dsx1Fdl
SYNTAX INTEGER (2)
ACCESS read-only
DESCRIPTION
"Only dsx1AnsiT1403(2) is supported.
Set is not allowed."
VARIATION dsx1LineStatusChangeTrapEnable
DEFVAL { enabled }
DESCRIPTION "The initial value is enabled(1)."
VARIATION dsx1Channelization
SYNTAX INTEGER {
enabledDs0(2)
}
ACCESS read-only
DESCRIPTION
"disabled(1) and enabledDs1(3) are not supported.
Set is not allowed."
VARIATION dsx1FarEndCurrentTable
DESCRIPTION "It is not supported on E1."
VARIATION dsx1FarEndIntervalTable
DESCRIPTION "It is not supported on E1."
VARIATION dsx1FarEndTotalTable
DESCRIPTION "It is not supported on E1."
::= { ciscoDs1Capability 4 }
ciscoDs1CapabilityMARsV12R5T AGENT-CAPABILITIES
PRODUCT-RELEASE "IOS 12.5T for Cisco Access Routers and ISRs"
STATUS current
DESCRIPTION
"Agent capabilities for Cisco 3700 series routers, IAD2430
and 2800, 3800 Series Integrated Services Routers."
SUPPORTS DS1-MIB
INCLUDES {
ds1NearEndConfigGroup,
ds1NearEndStatisticsGroup
}
VARIATION dsx1LineType
ACCESS read-only
DESCRIPTION
"Read only support is provided."
VARIATION dsx1LineCoding
ACCESS read-only
DESCRIPTION
"Read only support is provided."
VARIATION dsx1SendCode
ACCESS read-only
DESCRIPTION
"Read only support is provided."
VARIATION dsx1CircuitIdentifier
ACCESS read-only
DESCRIPTION
"Read only support is provided."
VARIATION dsx1LoopbackConfig
ACCESS read-only
DESCRIPTION
"Read only support is provided."
VARIATION dsx1SignalMode
ACCESS read-only
DESCRIPTION
"Read only support is provided."
VARIATION dsx1TransmitClockSource
ACCESS read-only
DESCRIPTION
"Read only support is provided."
VARIATION dsx1Fdl
ACCESS read-only
DESCRIPTION
"Read only support is provided."
VARIATION dsx1LineLength
ACCESS read-only
DESCRIPTION
"Configured length is shown if it is available.
If length is not available then the value is 0. For example, length
is not available for 'cablelength long' config"
VARIATION dsx1LineStatusChangeTrapEnable
ACCESS read-only
DESCRIPTION
"Read only support is provided."
VARIATION dsx1Channelization
ACCESS not-implemented
DESCRIPTION
"Not Supported."
VARIATION dsx1LineMode
ACCESS not-implemented
DESCRIPTION
"Not Supported."
VARIATION dsx1LineBuildOut
ACCESS not-implemented
DESCRIPTION
"Not Supported."
::= { ciscoDs1Capability 6 }
ciscoDs1CapabilityAS5xxxV12R5T AGENT-CAPABILITIES
PRODUCT-RELEASE "IOS 12.5T for Cisco Access Servers"
STATUS current
DESCRIPTION
"Agent capabilities for Cisco AS5xxx routers."
SUPPORTS DS1-MIB
INCLUDES {
ds1NearEndConfigGroup,
ds1NearEndStatisticsGroup
}
VARIATION dsx1LineType
ACCESS read-only
DESCRIPTION
"Read only support is provided."
VARIATION dsx1LineCoding
ACCESS read-only
DESCRIPTION
"Read only support is provided."
VARIATION dsx1SendCode
ACCESS read-only
DESCRIPTION
"Read only support is provided."
VARIATION dsx1CircuitIdentifier
ACCESS read-only
DESCRIPTION
"Read only support is provided."
VARIATION dsx1LoopbackConfig
ACCESS read-only
DESCRIPTION
"Read only support is provided."
VARIATION dsx1SignalMode
ACCESS read-only
DESCRIPTION
"Read only support is provided."
VARIATION dsx1TransmitClockSource
ACCESS read-only
DESCRIPTION
"Read only support is provided."
VARIATION dsx1Fdl
ACCESS read-only
DESCRIPTION
"Read only support is provided."
VARIATION dsx1InvalidIntervals
ACCESS not-implemented
DESCRIPTION
"Not Supported."
VARIATION dsx1LineLength
ACCESS not-implemented
DESCRIPTION
"Not Supported."
VARIATION dsx1LineStatusChangeTrapEnable
ACCESS not-implemented
DESCRIPTION
"Not Supported."
VARIATION dsx1LoopbackStatus
ACCESS not-implemented
DESCRIPTION
"Not Supported."
VARIATION dsx1Ds1ChannelNumber
ACCESS not-implemented
DESCRIPTION
"Not Supported."
VARIATION dsx1Channelization
ACCESS not-implemented
DESCRIPTION
"Not Supported."
VARIATION dsx1LineMode
ACCESS not-implemented
DESCRIPTION
"Not Supported."
VARIATION dsx1LineBuildOut
ACCESS not-implemented
DESCRIPTION
"Not Supported."
VARIATION dsx1IntervalValidData
ACCESS not-implemented
DESCRIPTION
"Not Supported."
::= { ciscoDs1Capability 7 }
ciscoDs1CapabilityV5R500 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8880 Release 5.5.0"
STATUS current
DESCRIPTION
"DS1 MIB capabilities for VXSM
in release 5.5.0."
SUPPORTS DS1-MIB
INCLUDES {
ds1NearEndConfigGroup,
ds1NearEndStatisticsGroup,
ds1FarEndGroup,
ds1NearEndOptionalConfigGroup
}
VARIATION dsx1LineCoding
DESCRIPTION
"Only supported by T1/E1 card
(entPhysicalVendorType is cevVxsm48t1e1)."
VARIATION dsx1LineLength
SYNTAX INTEGER (0..200)
DESCRIPTION
"Supported with limited length only by T1/E1 card
(entPhysicalVendorType is cevVxsm48t1e1),
for T1 only."
VARIATION dsx1CircuitIdentifier
SYNTAX DisplayString (SIZE (1..64))
DESCRIPTION "Restricted length supported."
VARIATION dsx1LineStatusLastChange
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1Ds1ChannelNumber
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1LineMode
DESCRIPTION
"Only supported by T1/E1 card
(entPhysicalVendorType is cevVxsm48t1e1),
for T1 only."
VARIATION dsx1LineBuildOut
DESCRIPTION
"Only supported by T1/E1 card
(entPhysicalVendorType is cevVxsm48t1e1),
for T1 only."
VARIATION dsx1CurrentDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1IntervalDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1TotalDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1FarEndCurrentDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1FarEndIntervalDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1FarEndTotalDMs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION dsx1LineType
SYNTAX INTEGER {
dsx1ESF(2),
dsx1D4(3),
dsx1E1(4),
dsx1E1CRC(5),
dsx1E1MF(6),
dsx1E1CRCMF(7),
dsx1E1Q50(12),
dsx1E1Q50CRC(13)
}
DESCRIPTION
"Limited data values are supported.
For T1, valid values are 2 and 3.
For E1, valid values are 4..7, 12 and 13."
VARIATION dsx1SendCode
SYNTAX INTEGER {
dsx1SendNoCode(1),
dsx1SendLineCode(2),
dsx1SendResetCode(4)
}
DESCRIPTION
"Limited values are supported on T1:
dsx1SendNoCode(1),
dsx1SendLineCode(2),
dsx1SendResetCode(4)
This object is supported on DS1 interface
and not supported on E1."
VARIATION dsx1LoopbackConfig
SYNTAX INTEGER {
dsx1NoLoop(1),
dsx1LineLoop(3),
dsx1InwardLoop(5)
}
DESCRIPTION
"Limited values are supported:
dsx1NoLoop(1),
dsx1LineLoop(3),
dsx1InwardLoop(5)"
VARIATION dsx1LineStatus
DESCRIPTION
"dsx1OtherFailure (value 4096) is used to indicate
the line is in BERT testing."
VARIATION dsx1SignalMode
SYNTAX INTEGER {
none(1),
robbedBit(2),
bitOriented(3),
other(5)
}
DESCRIPTION
"other(5) is only supported at
VXSM xGCP and T1.
For T1, valid values are 1, 2 and
5 (xGCP only).
For E1, valid values are 1 and 3."
VARIATION dsx1Fdl
SYNTAX INTEGER (2)
ACCESS read-only
DESCRIPTION
"Only dsx1AnsiT1403(2) is supported.
Set is not allowed."
VARIATION dsx1LineStatusChangeTrapEnable
DEFVAL { enabled }
DESCRIPTION "The default value is enabled(1)."
VARIATION dsx1Channelization
SYNTAX INTEGER {
enabledDs0(2)
}
ACCESS read-only
DESCRIPTION
"Limited values are supported:
enabledDs0(2)
Set is not allowed."
VARIATION dsx1FarEndCurrentTable
DESCRIPTION "It is not supported on E1."
VARIATION dsx1FarEndIntervalTable
DESCRIPTION "It is not supported on E1."
VARIATION dsx1FarEndTotalTable
DESCRIPTION "It is not supported on E1."
::= { ciscoDs1Capability 8 }
END
Reference in New Issue View Git Blame Copy Permalink