MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-DIAMETER-BASE-PROTOCOL-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

2477 lines
86 KiB
Plaintext
Raw Blame History

-- CISCO-DIAMETER-BASE-PROTOCOL-MIB.my : This MIB describes the SNMP
-- MIB objects that are supported pertaining to the
-- Diameter Base Protocol Configs/Stats.
--
-- July 2006, Glen W. Zorn
--
-- Copyright (c) 2005-2006, 2009 by cisco Systems, Inc.
-- All rights reserved.
--
-- This MIB module is based on the Internet Draft
-- draft-zorn-dime-diameter-base-protocol-mib-00.txt In terms of object
-- syntax and semantics, the content of this Cisco MIB is the same as
-- the corresponding Internet Draft revision. This Cisco MIB was
-- created due to the "subject to change" nature of Internet Drafts.
-- This Cisco MIB may later be deprecated, and the stable RFC,
-- which may replace the Internet Draft, may be implemented in its
-- place.
CISCO-DIAMETER-BASE-PROTOCOL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Counter32,
Unsigned32,
Gauge32,
IpAddress,
TimeTicks
FROM SNMPv2-SMI
NOTIFICATION-GROUP,
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
StorageType,
TruthValue,
RowStatus
FROM SNMPv2-TC
InetAddress,
InetAddressType
FROM INET-ADDRESS-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
ciscoExperiment
FROM CISCO-SMI;
-- [RFC2580]
ciscoDiameterBasePMIB MODULE-IDENTITY
LAST-UPDATED "200608240001Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-aaa@cisco.com"
DESCRIPTION
"The MIB module for entities implementing the
Diameter Base Protocol. Initial Cisco'ized version of the
IETF draft
draft-zorn-dime-diameter-base-protocol-mib-00.txt."
REVISION "200608240001Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoExperiment 133 }
-- Top-Level Components of this MIB.
ciscoDiameterBasePMIBNotifs OBJECT IDENTIFIER
::= { ciscoDiameterBasePMIB 0 }
ciscoDiameterBasePMIBObjects OBJECT IDENTIFIER
::= { ciscoDiameterBasePMIB 1 }
ciscoDiameterBasePMIBConform OBJECT IDENTIFIER
::= { ciscoDiameterBasePMIB 2 }
cdbpLocalCfgs OBJECT IDENTIFIER
::= { ciscoDiameterBasePMIBObjects 1 }
cdbpLocalStats OBJECT IDENTIFIER
::= { ciscoDiameterBasePMIBObjects 2 }
cdbpPeerCfgs OBJECT IDENTIFIER
::= { ciscoDiameterBasePMIBObjects 3 }
cdbpPeerStats OBJECT IDENTIFIER
::= { ciscoDiameterBasePMIBObjects 4 }
cdbpRealmCfgs OBJECT IDENTIFIER
::= { ciscoDiameterBasePMIBObjects 5 }
cdbpRealmStats OBJECT IDENTIFIER
::= { ciscoDiameterBasePMIBObjects 6 }
cdbpTrapCfgs OBJECT IDENTIFIER
::= { ciscoDiameterBasePMIBObjects 7 }
ciscoDiaBaseProtEnableProtocolErrorNotif OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value of this object to true(1)
enables the ciscoDiaBaseProtProtocolErrorNotif
notification."
DEFVAL { false }
::= { cdbpTrapCfgs 1 }
ciscoDiaBaseProtProtocolErrorNotif NOTIFICATION-TYPE
OBJECTS {
cdbpPeerId,
cdbpPeerStatsProtocolErrors
}
STATUS current
DESCRIPTION
"An ciscoDiaBaseProtProtocolErrorNotif notification
is sent when both the following conditions are true:
1) the value of ciscoDiaBaseProtEnableProtocolErrorNotif
is true(1)
2) the value of cdbpPeerStatsProtocolErrors changes.
It can be utilized by an NMS to trigger
logical/physical entity table maintenance polls."
::= { ciscoDiameterBasePMIBNotifs 1 }
ciscoDiaBaseProtEnableTransientFailureNotif OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value of this object to true(1)
enables the ciscoDiaBaseProtTransientFailureNotif
notification."
DEFVAL { false }
::= { cdbpTrapCfgs 2 }
ciscoDiaBaseProtTransientFailureNotif NOTIFICATION-TYPE
OBJECTS {
cdbpPeerId,
cdbpPeerStatsTransientFailures
}
STATUS current
DESCRIPTION
"An ciscoDiaBaseProtTransientFailureNotif notification
is sent when both the following conditions are true:
1) the value of ciscoDiaBaseProtEnableTransientFailureNotif
is true(1)
2) the value of cdbpPeerStatsTransientFailures changes.
It can be utilized by an NMS to trigger
logical/physical entity table maintenance polls."
::= { ciscoDiameterBasePMIBNotifs 2 }
ciscoDiaBaseProtEnablePermanentFailureNotif OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value of this object to true(1)
enables the ciscoDiaBaseProtPermanentFailureNotif
notification."
DEFVAL { false }
::= { cdbpTrapCfgs 3 }
ciscoDiaBaseProtPermanentFailureNotif NOTIFICATION-TYPE
OBJECTS {
cdbpPeerId,
cdbpPeerStatsPermanentFailures
}
STATUS current
DESCRIPTION
"An ciscoDiaBaseProtPermanentFailureNotif notification
is sent when both the following conditions are true:
1) the value of ciscoDiaBaseProtEnablePermanentFailureNotif
is true(1)
2) the value of cdbpPeerStatsPermanentFailures changes.
It can be utilized by an NMS to trigger
logical/physical entity table maintenance polls."
::= { ciscoDiameterBasePMIBNotifs 3 }
ciscoDiaBaseProtEnablePeerConnectionDownNotif OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value of this object to true(1)
enables the ciscoDiaBaseProtPeerConnectionDownNotif
notification."
DEFVAL { false }
::= { cdbpTrapCfgs 4 }
ciscoDiaBaseProtPeerConnectionDownNotif NOTIFICATION-TYPE
OBJECTS {
cdbpLocalId,
cdbpPeerId
}
STATUS current
DESCRIPTION
"An ciscoDiaBaseProtPeerConnectionDownNotif notification
is sent when both the following conditions are true:
1) the value of
ciscoDiaBaseProtEnablePeerConnectionDownNotif is true(1)
2) cdbpPeerStatsState changes to closed(1).
It can be utilized by an NMS to trigger logical/physical
entity table maintenance polls."
::= { ciscoDiameterBasePMIBNotifs 4 }
ciscoDiaBaseProtEnablePeerConnectionUpNotif OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value of this object to true(1)
enables the ciscoDiaBaseProtPeerConnectionUpNotif
notification."
DEFVAL { false }
::= { cdbpTrapCfgs 5 }
ciscoDiaBaseProtPeerConnectionUpNotif NOTIFICATION-TYPE
OBJECTS {
cdbpLocalId,
cdbpPeerId
}
STATUS current
DESCRIPTION
"An ciscoDiaBaseProtPeerConnectionUpNotif notification
is sent when both the following conditions are true:
1) the value of ciscoDiaBaseProtEnablePeerConnectionUpNotif
is true(1)
2) the value of cdbpPeerStatsState changes to
either rOpen(6)or iOpen(7). It can be
utilized by an NMS to trigger logical/physical entity
table maintenance polls."
::= { ciscoDiameterBasePMIBNotifs 5 }
cdbpLocalId OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The implementation identification string for the
Diameter software in use on the system, for
example; 'diameterd'"
::= { cdbpLocalCfgs 1 }
cdbpLocalIpAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF CdbpLocalIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the Diameter
local host's IP Addresses."
::= { cdbpLocalCfgs 2 }
cdbpLocalIpAddrEntry OBJECT-TYPE
SYNTAX CdbpLocalIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a Diameter
local host IP Address."
INDEX { cdbpLocalIpAddrIndex }
::= { cdbpLocalIpAddrTable 1 }
CdbpLocalIpAddrEntry ::= SEQUENCE {
cdbpLocalIpAddrIndex Unsigned32,
cdbpLocalIpAddrType InetAddressType,
cdbpLocalIpAddress InetAddress
}
cdbpLocalIpAddrIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying the number
of IP Addresses supported by this Diameter
host."
::= { cdbpLocalIpAddrEntry 1 }
cdbpLocalIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of internet address stored
in cdbpLocalIpAddress."
::= { cdbpLocalIpAddrEntry 2 }
cdbpLocalIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP-Address of the host, which is of the type
specified in cdbpLocalIpAddrType."
::= { cdbpLocalIpAddrEntry 3 }
cdbpLocalTcpListenPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents Diameter TCP 'listen' port."
::= { cdbpLocalCfgs 3 }
cdbpLocalSctpListenPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents Diameter SCTP 'listen' port."
::= { cdbpLocalCfgs 4 }
cdbpLocalOriginHost OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object represents the Local Origin Host."
DEFVAL { "" }
::= { cdbpLocalCfgs 5 }
cdbpLocalRealm OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object represents the Local Realm Name."
DEFVAL { "" }
::= { cdbpLocalCfgs 6 }
cdbpRedundancyEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter indicates if cisco redundancy has been
enabled, it is enabled if set to true and disabled if
set to false."
DEFVAL { false }
::= { cdbpLocalCfgs 7 }
cdbpRedundancyInfraState OBJECT-TYPE
SYNTAX INTEGER {
rfUnknown(0),
rfDisabled(1),
rfInitialization(2),
rfNegotiation(3),
rfStandbyCold(4),
rfStandbyConfig(5),
rfStandbyFileSys(6),
rfStandbyBulk(7),
rfStandbyHot(8),
rfActiveFast(9),
rfActiveDrain(10),
rfActivePreconfig(11),
rfActivePostconfig(12),
rfActive(13),
rfActiveExtraload(14)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter indicates the current state of cisco
redundancy infrastructure state.
rfUnknown(0) - unknown state
rfDisabled(1) - RF is not functioning at this
time
rfInitialization(2) - co-ordinating init with platform
rfNegotiation(3) - initial negotiation with peer to
determine active-standby
rfStandbyCold(4) - peer is active, we're cold
rfStandbyConfig(5) - sync config from active to
standby
rfStandbyFileSys(6) - sync file sys from active to
standby
rfStandbyBulk(7) - clients bulk sync from active
to standby
rfStandbyHot(8) - standby ready-n-able to be
active
rfActiveFast(9) - immediate notification of
standby going active
rfActiveDrain(10) - drain queued messages from peer
rfActivePreconfig(11) - active and before config
rfActivePostconfig(12) - active and post config
rfActive(13) - actively processing new calls
rfActiveExtraload(14) - actively processing new calls
extra resources other Processing
is failed and I have extra load."
::= { cdbpLocalCfgs 8 }
cdbpRedundancyLastSwitchover OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object represents the Last Switchover Time."
::= { cdbpLocalCfgs 9 }
cdbpLocalApplTable OBJECT-TYPE
SYNTAX SEQUENCE OF CdbpLocalApplEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the Diameter applications
supported by this server."
::= { cdbpLocalCfgs 10 }
cdbpLocalApplEntry OBJECT-TYPE
SYNTAX CdbpLocalApplEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a Diameter
application on this server."
INDEX { cdbpLocalApplIndex }
::= { cdbpLocalApplTable 1 }
CdbpLocalApplEntry ::= SEQUENCE {
cdbpLocalApplIndex Unsigned32,
cdbpLocalApplStorageType StorageType,
cdbpLocalApplRowStatus RowStatus
}
cdbpLocalApplIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying a
supported Diameter application. Upon reload,
cdbpLocalApplIndex values may be changed."
::= { cdbpLocalApplEntry 1 }
cdbpLocalApplStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. None of
the columnar objects is writable when the conceptual
row is permanent."
REFERENCE "Textual Conventions for SMIv2, Section 2."
DEFVAL { nonVolatile }
::= { cdbpLocalApplEntry 2 }
cdbpLocalApplRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the cdsgStatus column is
'notReady'.
In particular, a newly created row cannot be made
active until the corresponding cdbpLocalApplIndex
has been set.
cdbpLocalApplIndex may not be modified while the
value of this object is active(1):
An attempt to set these objects while the value of
cdbpLocalApplStatus is active(1) will result in
an inconsistentValue error.
Entries in this table with cdbpLocalApplStatus equal to
active(1) remain in the table until destroyed.
Entries in this table with cdbpLocalApplStatus equal to
values other than active(1) will be destroyed after timeout
(5 minutes)."
::= { cdbpLocalApplEntry 3 }
cdbpLocalVendorTable OBJECT-TYPE
SYNTAX SEQUENCE OF CdbpLocalVendorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the vendor IDs
supported by local Diameter."
::= { cdbpLocalCfgs 11 }
cdbpLocalVendorEntry OBJECT-TYPE
SYNTAX CdbpLocalVendorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a
vendor ID supported by local Diameter."
INDEX { cdbpLocalVendorIndex }
::= { cdbpLocalVendorTable 1 }
CdbpLocalVendorEntry ::= SEQUENCE {
cdbpLocalVendorIndex Unsigned32,
cdbpLocalVendorId INTEGER ,
cdbpLocalVendorStorageType StorageType,
cdbpLocalVendorRowStatus RowStatus
}
cdbpLocalVendorIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying the vendor
ID supported by local Diameter. Upon reload,
cdbpLocalVendorIndex values may be changed."
::= { cdbpLocalVendorEntry 1 }
cdbpLocalVendorId OBJECT-TYPE
SYNTAX INTEGER {
diameterVendorIetf(0),
diameterVendorCisco(9),
diameterVendor3gpp(10415),
diameterVendorVodafone(12645)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The active vendor ID used for peer connections.
diameterVendorIetf(0) - Diameter vendor
id ietf
diameterVendorCisco(9) - Diameter vendor
id cisco
diameterVendor3gpp(10415) - Diameter vendor
id 3gpp
diameterVendorVodafone(12645) - Diameter vendor
id vodafone."
DEFVAL { diameterVendorIetf }
::= { cdbpLocalVendorEntry 2 }
cdbpLocalVendorStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
None of the objects are writable when the
conceptual row is permanent."
REFERENCE "Textual Conventions for SMIv2, Section 2."
DEFVAL { nonVolatile }
::= { cdbpLocalVendorEntry 3 }
cdbpLocalVendorRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the cdbpLocalVendorRowStatus
column is 'notReady'.
In particular, a newly created row cannot be made
active until the corresponding cdbpLocalVendorId has been
set.
cdbpLocalVendorId may not be modified while the
value of this object is active(1):
An attempt to set these objects while the value of
cdbpLocalVendorRowStatus is active(1) will result in
an inconsistentValue error.
Entries in this table with cdbpLocalVendorRowStatus equal to
active(1) remain in the table until destroyed.
Entries in this table with cdbpLocalVendorRowStatus equal to
values other than active(1) will be destroyed after timeout
(5 minutes)."
::= { cdbpLocalVendorEntry 4 }
cdbpAppAdvToPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CdbpAppAdvToPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the applications advertised by
this host to each peer and the types of service
supported: accounting, authentication or both."
::= { cdbpLocalCfgs 12 }
cdbpAppAdvToPeerEntry OBJECT-TYPE
SYNTAX CdbpAppAdvToPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a discovered or
configured Diameter peer server."
INDEX {
cdbpPeerIndex,
cdbpAppAdvToPeerVendorId,
cdbpAppAdvToPeerIndex
}
::= { cdbpAppAdvToPeerTable 1 }
CdbpAppAdvToPeerEntry ::= SEQUENCE {
cdbpAppAdvToPeerVendorId Unsigned32,
cdbpAppAdvToPeerIndex Unsigned32,
cdbpAppAdvToPeerServices INTEGER ,
cdbpAppAdvToPeerStorageType StorageType,
cdbpAppAdvToPeerRowStatus RowStatus
}
cdbpAppAdvToPeerVendorId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IANA Enterprise Code value assigned to
the vendor of the Diameter device."
::= { cdbpAppAdvToPeerEntry 1 }
cdbpAppAdvToPeerIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying the Diameter
applications advertised as supported by
this host to each peer. Upon reload,
cdbpAppAdvToPeerIndex values may be changed."
::= { cdbpAppAdvToPeerEntry 2 }
cdbpAppAdvToPeerServices OBJECT-TYPE
SYNTAX INTEGER {
acct(1),
auth(2),
both(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of services supported for each application,
accounting, authentication or both.
acct(1) - accounting
auth(2) - authentication
both(3) - both accounting and authentication."
::= { cdbpAppAdvToPeerEntry 3 }
cdbpAppAdvToPeerStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
None of the objects are writable when the
conceptual row is permanent."
REFERENCE "Textual Conventions for SMIv2, Section 2."
DEFVAL { nonVolatile }
::= { cdbpAppAdvToPeerEntry 4 }
cdbpAppAdvToPeerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the cdbpAppAdvToPeerRowStatus
column is 'notReady'.
In particular, a newly created row cannot be made
active until the corresponding cdbpAppAdvToPeerVendorId has
been set.
cdbpAppAdvToPeerVendorId may not be modified while the
value of this object is active(1):
An attempt to set these objects while the value of
cdbpAppAdvToPeerRowStatus is active(1) will result in
an inconsistentValue error.
Entries in this table with cdbpAppAdvToPeerRowStatus equal
to active(1) remain in the table until destroyed.
Entries in this table with cdbpAppAdvToPeerRowStatus equal
to values other than active(1) will be destroyed after
timeout (5 minutes)."
::= { cdbpAppAdvToPeerEntry 5 }
cdbpLocalStatsTotalPacketsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by Diameter
Base Protocol."
::= { cdbpLocalStats 1 }
cdbpLocalStatsTotalPacketsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets transmitted by Diameter Base
Protocol."
::= { cdbpLocalStats 2 }
cdbpLocalStatsTotalUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total time the Diameter server
has been up until now."
::= { cdbpLocalStats 3 }
cdbpLocalResetTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the server keeps persistent state (e.g., a process)
and supports a 'reset' operation (e.g., can be told to
re-read configuration files), this value will be the
time elapsed (in hundredths of a second) since the
server was 'reset'. For software that does not
have persistence or does not support a 'reset'
operation, this value will be zero."
::= { cdbpLocalStats 4 }
cdbpLocalConfigReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2),
initializing(3),
running(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status/action object to reinitialize any persistent
server state. When set to reset(2), any persistent
server state (such as a process) is reinitialized as
if the server had just been started. This value will
never be returned by a read operation. When read,
one of the following values will be returned:
other(1) - server in some unknown state.
reset(2) - command to reinitialize server state.
initializing(3) - server (re)initializing.
running(4) - server currently running."
DEFVAL { other }
::= { cdbpLocalStats 5 }
cdbpPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CdbpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing information regarding
the discovered or configured Diameter
peer servers."
::= { cdbpPeerCfgs 1 }
cdbpPeerEntry OBJECT-TYPE
SYNTAX CdbpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a discovered
or configured Diameter peer server."
INDEX { cdbpPeerIndex }
::= { cdbpPeerTable 1 }
CdbpPeerEntry ::= SEQUENCE {
cdbpPeerIndex Unsigned32,
cdbpPeerId SnmpAdminString,
cdbpPeerPortConnect Unsigned32,
cdbpPeerPortListen Unsigned32,
cdbpPeerProtocol INTEGER ,
cdbpPeerSecurity INTEGER ,
cdbpPeerFirmwareRevision Unsigned32,
cdbpPeerStorageType StorageType,
cdbpPeerRowStatus RowStatus
}
cdbpPeerIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying each Diameter peer
with which the host server communicates. Upon reload,
cdbpPeerIndex values may be changed."
::= { cdbpPeerEntry 1 }
cdbpPeerId OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The server identifier for the Diameter peer. It must
be unique and non-empty."
::= { cdbpPeerEntry 2 }
cdbpPeerPortConnect OBJECT-TYPE
SYNTAX Unsigned32 (0..65535 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The connection port this server used
to connect to the Diameter peer.
If there is no active connection, this
value will be zero(0)."
DEFVAL { 0 }
::= { cdbpPeerEntry 3 }
cdbpPeerPortListen OBJECT-TYPE
SYNTAX Unsigned32 (1..65535 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The port the server is listening on."
DEFVAL { 3868 }
::= { cdbpPeerEntry 4 }
cdbpPeerProtocol OBJECT-TYPE
SYNTAX INTEGER {
tcp(1),
sctp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transport protocol (tcp/sctp) the
Diameter peer is using.
tcp(1) - Transmission Control Protocol
sctp(2) - Stream Control Transmission Protocol."
DEFVAL { tcp }
::= { cdbpPeerEntry 5 }
cdbpPeerSecurity OBJECT-TYPE
SYNTAX INTEGER {
other(1),
tls(2),
ipsec(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The security the Diameter peer is using.
other(1) - Unknown Security Protocol.
tls(2) - Transport Layer Security Protocol.
ipsec(3) - Internet Protocol Security."
DEFVAL { other }
::= { cdbpPeerEntry 6 }
cdbpPeerFirmwareRevision OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Firmware revision of peer. If no firmware
revision, the revision of the Diameter software
module may be reported instead."
::= { cdbpPeerEntry 7 }
cdbpPeerStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Only cdbpPeerPortListen object is writable when the
conceptual row is permanent."
REFERENCE "Textual Conventions for SMIv2, Section 2."
DEFVAL { nonVolatile }
::= { cdbpPeerEntry 8 }
cdbpPeerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the cdbpPeerRowStatus column is
'notReady'.
In particular, a newly created row cannot be made
active until the corresponding
cdbpPeerId has been set.
cdbpPeerId may not be modified while the
value of this object is active(1):
An attempt to set these objects while the value of
cdbpPeerRowStatus is active(1) will result in
an inconsistentValue error.
Entries in this table with cdbpPeerRowStatus equal to
active(1) remain in the table until destroyed.
Entries in this table with cdbpPeerRowStatus equal to
values other than active(1) will be destroyed after timeout
(5 minutes)."
::= { cdbpPeerEntry 9 }
cdbpPeerIpAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF CdbpPeerIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the Diameter
server IP Addresses."
::= { cdbpPeerCfgs 2 }
cdbpPeerIpAddrEntry OBJECT-TYPE
SYNTAX CdbpPeerIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing peer
Diameter server IP Addresses."
INDEX {
cdbpPeerIndex,
cdbpPeerIpAddressIndex
}
::= { cdbpPeerIpAddrTable 1 }
CdbpPeerIpAddrEntry ::= SEQUENCE {
cdbpPeerIpAddressIndex Unsigned32,
cdbpPeerIpAddressType InetAddressType,
cdbpPeerIpAddress IpAddress
}
cdbpPeerIpAddressIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying the number
of IP Addresses supported by all Diameter
peers."
::= { cdbpPeerIpAddrEntry 1 }
cdbpPeerIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of address stored in
diameterPeerIpAddress."
::= { cdbpPeerIpAddrEntry 2 }
cdbpPeerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The active IP Address(es) used for connections."
::= { cdbpPeerIpAddrEntry 3 }
cdbpAppAdvFromPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CdbpAppAdvFromPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the applications advertised by
each peer to this host and the types of service
supported: accounting, authentication or both."
::= { cdbpPeerCfgs 3 }
cdbpAppAdvFromPeerEntry OBJECT-TYPE
SYNTAX CdbpAppAdvFromPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a discovered or
configured Diameter peer server."
INDEX {
cdbpPeerIndex,
cdbpAppAdvFromPeerVendorId,
cdbpAppAdvFromPeerIndex
}
::= { cdbpAppAdvFromPeerTable 1 }
CdbpAppAdvFromPeerEntry ::= SEQUENCE {
cdbpAppAdvFromPeerVendorId Unsigned32,
cdbpAppAdvFromPeerIndex Unsigned32,
cdbpAppAdvFromPeerType INTEGER
}
cdbpAppAdvFromPeerVendorId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IANA Enterprise Code value assigned to
the vendor of the Diameter device."
::= { cdbpAppAdvFromPeerEntry 1 }
cdbpAppAdvFromPeerIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying the applications
advertised as supported from each Diameter peer."
::= { cdbpAppAdvFromPeerEntry 2 }
cdbpAppAdvFromPeerType OBJECT-TYPE
SYNTAX INTEGER {
acct(1),
auth(2),
both(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of services supported for each application,
accounting, authentication or both.
acct(1) - accounting
auth(2) - authentication
both(3) - both accounting and authentication."
::= { cdbpAppAdvFromPeerEntry 3 }
cdbpPeerVendorTable OBJECT-TYPE
SYNTAX SEQUENCE OF CdbpPeerVendorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the Vendor IDs
supported by the peer."
::= { cdbpPeerCfgs 4 }
cdbpPeerVendorEntry OBJECT-TYPE
SYNTAX CdbpPeerVendorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a
Vendor ID supported by the peer."
INDEX {
cdbpPeerIndex,
cdbpPeerVendorIndex
}
::= { cdbpPeerVendorTable 1 }
CdbpPeerVendorEntry ::= SEQUENCE {
cdbpPeerVendorIndex Unsigned32,
cdbpPeerVendorId INTEGER ,
cdbpPeerVendorStorageType StorageType,
cdbpPeerVendorRowStatus RowStatus
}
cdbpPeerVendorIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying the Vendor
ID supported by the peer. Upon reload,
cdbpPeerVendorIndex values may be changed."
::= { cdbpPeerVendorEntry 1 }
cdbpPeerVendorId OBJECT-TYPE
SYNTAX INTEGER {
diameterVendorIetf(0),
diameterVendorCisco(9),
diameterVendor3gpp(10415),
diameterVendorVodafone(12645)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The active vendor ID used for peer connections.
diameterVendorIetf(0) - Diameter vendor
id ietf
diameterVendorCisco(9) - Diameter vendor
id cisco
diameterVendor3gpp(10415) - Diameter vendor
id 3gpp
diameterVendorVodafone(12645) - Diameter vendor
id vodafone."
DEFVAL { diameterVendorIetf }
::= { cdbpPeerVendorEntry 2 }
cdbpPeerVendorStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
None of the objects are writable when the
conceptual row is permanent."
REFERENCE "Textual Conventions for SMIv2, Section 2."
DEFVAL { nonVolatile }
::= { cdbpPeerVendorEntry 3 }
cdbpPeerVendorRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the cdbpPeerVendorRowStatus column
is 'notReady'.
In particular, a newly created row cannot be made
active until the corresponding cdbpPeerVendorId has been
set. Also, a newly created row cannot be made active until
the corresponding 'cdbpPeerIndex' has been set.
cdbpPeerVendorId may not be modified while the
value of this object is active(1):
An attempt to set these objects while the value of
cdbpPeerVendorRowStatus is active(1) will result in
an inconsistentValue error.
Entries in this table with cdbpPeerVendorRowStatus equal to
active(1) remain in the table until destroyed.
Entries in this table with cdbpPeerVendorRowStatus equal to
values other than active(1) will be destroyed after timeout
(5 minutes)."
::= { cdbpPeerVendorEntry 4 }
cdbpPeerStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CdbpPeerStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table listing the Diameter peer statistics."
::= { cdbpPeerStats 1 }
cdbpPeerStatsEntry OBJECT-TYPE
SYNTAX CdbpPeerStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A row entry representing a Diameter peer."
INDEX { cdbpPeerIndex }
::= { cdbpPeerStatsTable 1 }
CdbpPeerStatsEntry ::= SEQUENCE {
cdbpPeerStatsState INTEGER ,
cdbpPeerStatsStateDuration TimeTicks,
cdbpPeerStatsLastDiscCause INTEGER ,
cdbpPeerStatsWhoInitDisconnect INTEGER ,
cdbpPeerStatsDWCurrentStatus INTEGER ,
cdbpPeerStatsTimeoutConnAtmpts Counter32,
cdbpPeerStatsASRsIn Counter32,
cdbpPeerStatsASRsOut Counter32,
cdbpPeerStatsASAsIn Counter32,
cdbpPeerStatsASAsOut Counter32,
cdbpPeerStatsACRsIn Counter32,
cdbpPeerStatsACRsOut Counter32,
cdbpPeerStatsACAsIn Counter32,
cdbpPeerStatsACAsOut Counter32,
cdbpPeerStatsCERsIn Counter32,
cdbpPeerStatsCERsOut Counter32,
cdbpPeerStatsCEAsIn Counter32,
cdbpPeerStatsCEAsOut Counter32,
cdbpPeerStatsDWRsIn Counter32,
cdbpPeerStatsDWRsOut Counter32,
cdbpPeerStatsDWAsIn Counter32,
cdbpPeerStatsDWAsOut Counter32,
cdbpPeerStatsDPRsIn Counter32,
cdbpPeerStatsDPRsOut Counter32,
cdbpPeerStatsDPAsIn Counter32,
cdbpPeerStatsDPAsOut Counter32,
cdbpPeerStatsRARsIn Counter32,
cdbpPeerStatsRARsOut Counter32,
cdbpPeerStatsRAAsIn Counter32,
cdbpPeerStatsRAAsOut Counter32,
cdbpPeerStatsSTRsIn Counter32,
cdbpPeerStatsSTRsOut Counter32,
cdbpPeerStatsSTAsIn Counter32,
cdbpPeerStatsSTAsOut Counter32,
cdbpPeerStatsDWReqTimer TimeTicks,
cdbpPeerStatsRedirectEvents Counter32,
cdbpPeerStatsAccDupRequests Counter32,
cdbpPeerStatsMalformedReqsts Counter32,
cdbpPeerStatsAccsNotRecorded Counter32,
cdbpPeerStatsAccRetrans Counter32,
cdbpPeerStatsTotalRetrans Counter32,
cdbpPeerStatsAccPendReqstsOut Gauge32,
cdbpPeerStatsAccReqstsDropped Counter32,
cdbpPeerStatsHByHDropMessages Counter32,
cdbpPeerStatsEToEDupMessages Counter32,
cdbpPeerStatsUnknownTypes Counter32,
cdbpPeerStatsProtocolErrors Counter32,
cdbpPeerStatsTransientFailures Counter32,
cdbpPeerStatsPermanentFailures Counter32,
cdbpPeerStatsTransportDown Counter32
}
cdbpPeerStatsState OBJECT-TYPE
SYNTAX INTEGER {
closed(1),
waitConnAck(2),
waitICEA(3),
elect(4),
waitReturns(5),
rOpen(6),
iOpen(7),
closing(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Connection state in the Peer State Machine of
the peer with which this Diameter server is
communicating.
closed(1) - Connection closed with this peer.
waitConnAck(2) - Waiting for an acknowledgment
from this peer.
waitICEA(3) - Waiting for a Capabilities-Exchange-
Answer from this peer.
elect(4) - When the peer and the server are both
trying to bring up a connection with
each other at the same time. An
election process begins which
determines which socket remains open.
waitReturns(5) - Waiting for election returns.
r-open(6) - Responder transport connection is
used for communication.
i-open(7) - Initiator transport connection is
used for communication.
closing(8) - Actively closing and doing cleanup."
::= { cdbpPeerStatsEntry 1 }
cdbpPeerStatsStateDuration OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object represents the Peer state duration."
::= { cdbpPeerStatsEntry 2 }
cdbpPeerStatsLastDiscCause OBJECT-TYPE
SYNTAX INTEGER {
rebooting(1),
busy(2),
doNotWantToTalk(3),
election(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last cause for a peers disconnection.
rebooting(1) - A scheduled reboot is imminent.
busy(2) - The peer's internal resources are
constrained, and it has determined
that the transport connection needs
to be shutdown.
doNotWantToTalk(3) - The peer has determined that
it does not see a need for the
transport connection to exist,
since it does not expect any
messages to be exchanged in
the foreseeable future.
electionLost(4) - The peer has determined that it
has lost the election process
and has therefore disconnected
the transport connection."
::= { cdbpPeerStatsEntry 3 }
cdbpPeerStatsWhoInitDisconnect OBJECT-TYPE
SYNTAX INTEGER {
host(1),
peer(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Did the host or peer initiate the disconnect?
host(1) - If this server initiated the disconnect.
peer(2) - If the peer with which this server was
connected initiated the disconnect."
::= { cdbpPeerStatsEntry 4 }
cdbpPeerStatsDWCurrentStatus OBJECT-TYPE
SYNTAX INTEGER {
okay(1),
suspect(2),
down(3),
reopen(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the connection status.
okay(1) - Indicates the connection is presumed working.
suspect(2) - Indicates the connection is possibly
congested or down.
down(3) - The peer is no longer reachable, causing
the transport connection to be shutdown.
reopen(4) - Three watchdog messages are exchanged with
accepted round trip times, and the connection
to the peer is considered stabilized."
::= { cdbpPeerStatsEntry 5 }
cdbpPeerStatsTimeoutConnAtmpts OBJECT-TYPE
SYNTAX Counter32
UNITS "attempts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If there is no transport connection with a peer,
this is the number of times the server attempts
to connect to that peer. This is reset on
disconnection."
::= { cdbpPeerStatsEntry 6 }
cdbpPeerStatsASRsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Abort-Session-Request messages received
from the peer."
::= { cdbpPeerStatsEntry 7 }
cdbpPeerStatsASRsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Abort-Session-Request messages
sent to the peer."
::= { cdbpPeerStatsEntry 8 }
cdbpPeerStatsASAsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Answer
messages received from the peer."
::= { cdbpPeerStatsEntry 9 }
cdbpPeerStatsASAsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Answer
messages sent to the peer."
::= { cdbpPeerStatsEntry 10 }
cdbpPeerStatsACRsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Request messages
received from the peer."
::= { cdbpPeerStatsEntry 11 }
cdbpPeerStatsACRsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Request messages
sent to the peer."
::= { cdbpPeerStatsEntry 12 }
cdbpPeerStatsACAsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Answer messages
received from the peer."
::= { cdbpPeerStatsEntry 13 }
cdbpPeerStatsACAsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Answer messages
sent to the peer."
::= { cdbpPeerStatsEntry 14 }
cdbpPeerStatsCERsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Capabilities-Exchange-Request
messages received from the peer."
::= { cdbpPeerStatsEntry 15 }
cdbpPeerStatsCERsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Capabilities-Exchange-Request
messages sent to the peer."
::= { cdbpPeerStatsEntry 16 }
cdbpPeerStatsCEAsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Capabilities-Exchange-Answer
messages received from the peer."
::= { cdbpPeerStatsEntry 17 }
cdbpPeerStatsCEAsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Capabilities-Exchange-Answer
messages sent to the peer."
::= { cdbpPeerStatsEntry 18 }
cdbpPeerStatsDWRsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Device-Watchdog-Request
messages received from the peer."
::= { cdbpPeerStatsEntry 19 }
cdbpPeerStatsDWRsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Device-Watchdog-Request
messages sent to the peer."
::= { cdbpPeerStatsEntry 20 }
cdbpPeerStatsDWAsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Device-Watchdog-Answer
messages received from the peer."
::= { cdbpPeerStatsEntry 21 }
cdbpPeerStatsDWAsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Device-Watchdog-Answer
messages sent to the peer."
::= { cdbpPeerStatsEntry 22 }
cdbpPeerStatsDPRsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Disconnect-Peer-Request messages
received."
::= { cdbpPeerStatsEntry 23 }
cdbpPeerStatsDPRsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Disconnect-Peer-Request messages
sent."
::= { cdbpPeerStatsEntry 24 }
cdbpPeerStatsDPAsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Disconnect-Peer-Answer messages
received."
::= { cdbpPeerStatsEntry 25 }
cdbpPeerStatsDPAsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Disconnect-Peer-Answer messages
sent."
::= { cdbpPeerStatsEntry 26 }
cdbpPeerStatsRARsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Request messages
received."
::= { cdbpPeerStatsEntry 27 }
cdbpPeerStatsRARsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Request messages
sent."
::= { cdbpPeerStatsEntry 28 }
cdbpPeerStatsRAAsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Answer messages
received."
::= { cdbpPeerStatsEntry 29 }
cdbpPeerStatsRAAsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Answer messages
sent."
::= { cdbpPeerStatsEntry 30 }
cdbpPeerStatsSTRsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Request
messages received from the peer."
::= { cdbpPeerStatsEntry 31 }
cdbpPeerStatsSTRsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Request
messages sent to the peer."
::= { cdbpPeerStatsEntry 32 }
cdbpPeerStatsSTAsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Answer
messages received from the peer."
::= { cdbpPeerStatsEntry 33 }
cdbpPeerStatsSTAsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Answer
messages sent to the peer."
::= { cdbpPeerStatsEntry 34 }
cdbpPeerStatsDWReqTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device-Watchdog Request Timer, which
is the interval between packets sent to
peers."
::= { cdbpPeerStatsEntry 35 }
cdbpPeerStatsRedirectEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Redirect Event count, which is the number
of redirects sent from a peer."
::= { cdbpPeerStatsEntry 36 }
cdbpPeerStatsAccDupRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of duplicate Diameter Accounting-Request
packets received."
::= { cdbpPeerStatsEntry 37 }
cdbpPeerStatsMalformedReqsts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of malformed Diameter
packets received."
::= { cdbpPeerStatsEntry 38 }
cdbpPeerStatsAccsNotRecorded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Diameter Accounting-Request packets
which were received and responded to but not
recorded."
::= { cdbpPeerStatsEntry 39 }
cdbpPeerStatsAccRetrans OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Diameter Accounting-Request packets
retransmitted to this Diameter server."
::= { cdbpPeerStatsEntry 40 }
cdbpPeerStatsTotalRetrans OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Diameter packets retransmitted
to this Diameter server, not to include Diameter
Accounting-Request packets retransmitted."
::= { cdbpPeerStatsEntry 41 }
cdbpPeerStatsAccPendReqstsOut OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Diameter Accounting-Request packets
sent to this peer that have not yet timed out or
received a response. This variable is incremented when an
Accounting-Request is sent to this server and decremented
due to receipt of an Accounting-Response, a timeout or
a retransmission."
::= { cdbpPeerStatsEntry 42 }
cdbpPeerStatsAccReqstsDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Accounting-Requests to this server
that have been dropped."
::= { cdbpPeerStatsEntry 43 }
cdbpPeerStatsHByHDropMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An answer message that is received with an unknown
hop-by-hop identifier. Does not include accounting
requests dropped."
::= { cdbpPeerStatsEntry 44 }
cdbpPeerStatsEToEDupMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duplicate answer messages that are to be locally
consumed. Does not include duplicate accounting
requests received."
::= { cdbpPeerStatsEntry 45 }
cdbpPeerStatsUnknownTypes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Diameter packets of unknown type
which were received."
::= { cdbpPeerStatsEntry 46 }
cdbpPeerStatsProtocolErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Number of protocol errors
returned to peer, but not including redirects."
::= { cdbpPeerStatsEntry 47 }
cdbpPeerStatsTransientFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the transient failure
count."
::= { cdbpPeerStatsEntry 48 }
cdbpPeerStatsPermanentFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Number of permanent
failures returned to peer."
::= { cdbpPeerStatsEntry 49 }
cdbpPeerStatsTransportDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Number of unexpected
transport failures."
::= { cdbpPeerStatsEntry 50 }
cdbpRealmKnownPeersTable OBJECT-TYPE
SYNTAX SEQUENCE OF CdbpRealmKnownPeersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the Diameter
realms and known peers."
::= { cdbpRealmCfgs 1 }
cdbpRealmKnownPeersEntry OBJECT-TYPE
SYNTAX CdbpRealmKnownPeersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a Diameter
realm and known peers."
INDEX {
cdbpRealmMessageRouteIndex,
cdbpRealmKnownPeersIndex
}
::= { cdbpRealmKnownPeersTable 1 }
CdbpRealmKnownPeersEntry ::= SEQUENCE {
cdbpRealmKnownPeersIndex Unsigned32,
cdbpRealmKnownPeers Unsigned32,
cdbpRealmKnownPeersChosen INTEGER
}
cdbpRealmKnownPeersIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying a peer
known to this realm. Upon reload,
cdbpRealmKnownPeersIndex values may be changed."
::= { cdbpRealmKnownPeersEntry 1 }
cdbpRealmKnownPeers OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the peer this realm knows about.
This is an ordered list, where the ordering
signifies the order in which the peers are
tried. Same as the cdbpPeerIndex"
::= { cdbpRealmKnownPeersEntry 2 }
cdbpRealmKnownPeersChosen OBJECT-TYPE
SYNTAX INTEGER {
roundRobin(1),
loadBalance(2),
firstPreferred(3),
mostRecentFirst(4),
other(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"How the realm chooses which peer to send
packets to.
roundRobin(1) - The peer used for each transaction
is selected based on the order in
which peers are configured.
loadBalance(2) - The peer used for each transaction
is based on the load metric (maybe
implementation dependent) of all
peers defined for the realm, with
the least loaded server selected
first.
firstPreferred(3) - The first defined server is always
used for transactions unless
failover occurs.
mostRecentFirst(4) - The most recently used server is
used first for each transaction."
::= { cdbpRealmKnownPeersEntry 3 }
cdbpRealmMessageRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF CdbpRealmMessageRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the Diameter
realm-based message route information."
::= { cdbpRealmStats 1 }
cdbpRealmMessageRouteEntry OBJECT-TYPE
SYNTAX CdbpRealmMessageRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a Diameter
realm based message route server."
INDEX { cdbpRealmMessageRouteIndex }
::= { cdbpRealmMessageRouteTable 1 }
CdbpRealmMessageRouteEntry ::= SEQUENCE {
cdbpRealmMessageRouteIndex Unsigned32,
cdbpRealmMessageRouteRealm SnmpAdminString,
cdbpRealmMessageRouteApp Unsigned32,
cdbpRealmMessageRouteType INTEGER ,
cdbpRealmMessageRouteAction INTEGER ,
cdbpRealmMessageRouteACRsIn Counter32,
cdbpRealmMessageRouteACRsOut Counter32,
cdbpRealmMessageRouteACAsIn Counter32,
cdbpRealmMessageRouteACAsOut Counter32,
cdbpRealmMessageRouteRARsIn Counter32,
cdbpRealmMessageRouteRARsOut Counter32,
cdbpRealmMessageRouteRAAsIn Counter32,
cdbpRealmMessageRouteRAAsOut Counter32,
cdbpRealmMessageRouteSTRsIn Counter32,
cdbpRealmMessageRouteSTRsOut Counter32,
cdbpRealmMessageRouteSTAsIn Counter32,
cdbpRealmMessageRouteSTAsOut Counter32,
cdbpRealmMessageRouteASRsIn Counter32,
cdbpRealmMessageRouteASRsOut Counter32,
cdbpRealmMessageRouteASAsIn Counter32,
cdbpRealmMessageRouteASAsOut Counter32,
cdbpRealmMessageRouteAccRetrans Counter32,
cdbpRealmMessageRouteAccDupReqsts Counter32,
cdbpRealmMessageRoutePendReqstsOut Gauge32,
cdbpRealmMessageRouteReqstsDrop Counter32
}
cdbpRealmMessageRouteIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A number uniquely identifying each realm."
::= { cdbpRealmMessageRouteEntry 1 }
cdbpRealmMessageRouteRealm OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object represents the realm name"
::= { cdbpRealmMessageRouteEntry 2 }
cdbpRealmMessageRouteApp OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Application id used to route packets
to this realm."
::= { cdbpRealmMessageRouteEntry 3 }
cdbpRealmMessageRouteType OBJECT-TYPE
SYNTAX INTEGER {
acct(1),
auth(2),
both(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The types of service supported for each
realm application: accounting,
authentication or both.
acct(1) - accounting
auth(2) - authentication
both(3) - both accounting and authentication."
::= { cdbpRealmMessageRouteEntry 4 }
cdbpRealmMessageRouteAction OBJECT-TYPE
SYNTAX INTEGER {
local(1),
relay(2),
proxy(3),
redirect(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The action is used to identify how a
message should be treated based on the realm,
application and type.
local(1) - Diameter messages that resolve to a
route entry with the Local Action set to
Local can be satisfied locally, and do
not need to be routed to another server.
relay(2) - All Diameter messages that fall within
this category MUST be routed to a
next-hop server, without modifying any
non-routing AVPs.
proxy(3) - All Diameter messages that fall within this
category MUST be routed to a next-hop
server.
redirect(4) - Diameter messages that fall within this
category MUST have the identity of the home
Diameter server(s) appended, and returned
to the sender of the message."
::= { cdbpRealmMessageRouteEntry 5 }
cdbpRealmMessageRouteACRsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Request messages
received from the realm."
::= { cdbpRealmMessageRouteEntry 6 }
cdbpRealmMessageRouteACRsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Request messages
sent to the realm."
::= { cdbpRealmMessageRouteEntry 7 }
cdbpRealmMessageRouteACAsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Answer messages
received from the realm."
::= { cdbpRealmMessageRouteEntry 8 }
cdbpRealmMessageRouteACAsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Answer messages
sent to the realm."
::= { cdbpRealmMessageRouteEntry 9 }
cdbpRealmMessageRouteRARsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Request messages
received from the realm."
::= { cdbpRealmMessageRouteEntry 10 }
cdbpRealmMessageRouteRARsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Request messages
sent to the realm."
::= { cdbpRealmMessageRouteEntry 11 }
cdbpRealmMessageRouteRAAsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Answer messages
received from the realm."
::= { cdbpRealmMessageRouteEntry 12 }
cdbpRealmMessageRouteRAAsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Answer messages
sent to the realm."
::= { cdbpRealmMessageRouteEntry 13 }
cdbpRealmMessageRouteSTRsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Request messages
received from the realm."
::= { cdbpRealmMessageRouteEntry 14 }
cdbpRealmMessageRouteSTRsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Request messages
sent to the realm."
::= { cdbpRealmMessageRouteEntry 15 }
cdbpRealmMessageRouteSTAsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Answer messages
received from the realm."
::= { cdbpRealmMessageRouteEntry 16 }
cdbpRealmMessageRouteSTAsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Answer messages
sent to the realm."
::= { cdbpRealmMessageRouteEntry 17 }
cdbpRealmMessageRouteASRsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Request messages
received from the realm."
::= { cdbpRealmMessageRouteEntry 18 }
cdbpRealmMessageRouteASRsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Request messages
sent to the realm."
::= { cdbpRealmMessageRouteEntry 19 }
cdbpRealmMessageRouteASAsIn OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Answer messages
received from the realm."
::= { cdbpRealmMessageRouteEntry 20 }
cdbpRealmMessageRouteASAsOut OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Answer messages
sent to the realm."
::= { cdbpRealmMessageRouteEntry 21 }
cdbpRealmMessageRouteAccRetrans OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Diameter accounting packets
retransmitted to this realm."
::= { cdbpRealmMessageRouteEntry 22 }
cdbpRealmMessageRouteAccDupReqsts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of duplicate Diameter accounting
packets sent to this realm."
::= { cdbpRealmMessageRouteEntry 23 }
cdbpRealmMessageRoutePendReqstsOut OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Diameter Accounting-Request packets
sent to this peer that have not yet timed out or
received a response. This variable is incremented when an
Accounting-Request is sent to this server and decremented
due to receipt of an Accounting-Response, a timeout or
a retransmission."
::= { cdbpRealmMessageRouteEntry 24 }
cdbpRealmMessageRouteReqstsDrop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of requests dropped by this realm."
::= { cdbpRealmMessageRouteEntry 25 }
-- Conformance
ciscoDiameterBasePMIBCompliances OBJECT IDENTIFIER
::= { ciscoDiameterBasePMIBConform 1 }
ciscoDiameterBasePMIBGroups OBJECT IDENTIFIER
::= { ciscoDiameterBasePMIBConform 2 }
-- Compliance Statements
ciscoDiameterBasePMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for Diameter Base
Protocol entities."
MODULE -- this module
MANDATORY-GROUPS {
ciscoDiameterBasePMIBLocalCfgGroup,
ciscoDiameterBasePMIBPeerCfgGroup,
ciscoDiameterBasePMIBPeerStatsGroup,
ciscoDiameterBasePMIBNotificationsGroup,
ciscoDiameterBasePMIBTrapCfgGroup
}
GROUP ciscoDiameterBasePMIBLocalCfgSkippedGroup
DESCRIPTION
"This group is only mandatory for a system that implements
all the local config objects."
GROUP ciscoDiameterBasePMIBLocalStatsSkippedGroup
DESCRIPTION
"This group is only mandatory for a system that implements
all the local statistics objects."
GROUP ciscoDiameterBasePMIBPeerCfgSkippedGroup
DESCRIPTION
"This group is only mandatory for a system that implements
all the peer config objects."
GROUP ciscoDiameterBasePMIBPeerStatsSkippedGroup
DESCRIPTION
"This group is only mandatory for a system that implements
all the peer statistic objects."
GROUP ciscoDiameterBasePMIBRealmCfgSkippedGroup
DESCRIPTION
"This group is only mandatory for a system that implements
all the realm config objects."
GROUP ciscoDiameterBasePMIBRealmStatsSkippedGroup
DESCRIPTION
"This group is only mandatory for a system that implements
all the realm statistic objects."
::= { ciscoDiameterBasePMIBCompliances 1 }
-- Units of Conformance
ciscoDiameterBasePMIBLocalCfgGroup OBJECT-GROUP
OBJECTS {
cdbpLocalRealm,
cdbpRedundancyEnabled,
cdbpRedundancyInfraState,
cdbpRedundancyLastSwitchover,
cdbpLocalOriginHost,
cdbpLocalVendorId,
cdbpLocalVendorStorageType,
cdbpLocalVendorRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration common
to the server."
::= { ciscoDiameterBasePMIBGroups 1 }
ciscoDiameterBasePMIBPeerCfgGroup OBJECT-GROUP
OBJECTS {
cdbpPeerId,
cdbpPeerPortConnect,
cdbpPeerPortListen,
cdbpPeerProtocol,
cdbpPeerSecurity,
cdbpPeerFirmwareRevision,
cdbpPeerStorageType,
cdbpPeerRowStatus,
cdbpPeerIpAddressType,
cdbpPeerIpAddress,
cdbpPeerVendorId,
cdbpPeerVendorStorageType,
cdbpPeerVendorRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration
of the Diameter peers."
::= { ciscoDiameterBasePMIBGroups 2 }
ciscoDiameterBasePMIBPeerStatsGroup OBJECT-GROUP
OBJECTS {
cdbpPeerStatsState,
cdbpPeerStatsStateDuration,
cdbpPeerStatsLastDiscCause,
cdbpPeerStatsWhoInitDisconnect,
cdbpPeerStatsDWCurrentStatus,
cdbpPeerStatsTimeoutConnAtmpts,
cdbpPeerStatsASRsIn,
cdbpPeerStatsASRsOut,
cdbpPeerStatsASAsIn,
cdbpPeerStatsASAsOut,
cdbpPeerStatsACRsIn,
cdbpPeerStatsACRsOut,
cdbpPeerStatsACAsIn,
cdbpPeerStatsACAsOut,
cdbpPeerStatsCERsIn,
cdbpPeerStatsCERsOut,
cdbpPeerStatsCEAsIn,
cdbpPeerStatsCEAsOut,
cdbpPeerStatsDWRsIn,
cdbpPeerStatsDWRsOut,
cdbpPeerStatsDWAsIn,
cdbpPeerStatsDWAsOut,
cdbpPeerStatsDPRsIn,
cdbpPeerStatsDPRsOut,
cdbpPeerStatsDPAsIn,
cdbpPeerStatsDPAsOut,
cdbpPeerStatsRARsIn,
cdbpPeerStatsRARsOut,
cdbpPeerStatsRAAsIn,
cdbpPeerStatsRAAsOut,
cdbpPeerStatsSTRsIn,
cdbpPeerStatsSTRsOut,
cdbpPeerStatsSTAsIn,
cdbpPeerStatsSTAsOut,
cdbpPeerStatsDWReqTimer,
cdbpPeerStatsRedirectEvents,
cdbpPeerStatsAccDupRequests,
cdbpPeerStatsMalformedReqsts,
cdbpPeerStatsAccsNotRecorded,
cdbpPeerStatsAccRetrans,
cdbpPeerStatsTotalRetrans,
cdbpPeerStatsAccPendReqstsOut,
cdbpPeerStatsAccReqstsDropped,
cdbpPeerStatsHByHDropMessages,
cdbpPeerStatsEToEDupMessages,
cdbpPeerStatsUnknownTypes,
cdbpPeerStatsProtocolErrors,
cdbpPeerStatsTransientFailures,
cdbpPeerStatsPermanentFailures,
cdbpPeerStatsTransportDown
}
STATUS current
DESCRIPTION
"A collection of objects providing statistics
of the Diameter peers."
::= { ciscoDiameterBasePMIBGroups 3 }
ciscoDiameterBasePMIBNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ciscoDiaBaseProtProtocolErrorNotif,
ciscoDiaBaseProtTransientFailureNotif,
ciscoDiaBaseProtPermanentFailureNotif,
ciscoDiaBaseProtPeerConnectionDownNotif,
ciscoDiaBaseProtPeerConnectionUpNotif
}
STATUS current
DESCRIPTION
"The set of notifications which an agent is required
to implement."
::= { ciscoDiameterBasePMIBGroups 4 }
ciscoDiameterBasePMIBTrapCfgGroup OBJECT-GROUP
OBJECTS {
ciscoDiaBaseProtEnableProtocolErrorNotif,
ciscoDiaBaseProtEnableTransientFailureNotif,
ciscoDiaBaseProtEnablePermanentFailureNotif,
ciscoDiaBaseProtEnablePeerConnectionDownNotif,
ciscoDiaBaseProtEnablePeerConnectionUpNotif
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration for
base protocol notifications."
::= { ciscoDiameterBasePMIBGroups 5 }
ciscoDiameterBasePMIBLocalCfgSkippedGroup OBJECT-GROUP
OBJECTS {
cdbpLocalId,
cdbpLocalIpAddrType,
cdbpLocalIpAddress,
cdbpLocalTcpListenPort,
cdbpLocalSctpListenPort,
cdbpLocalStatsTotalPacketsIn,
cdbpLocalStatsTotalPacketsOut,
cdbpLocalStatsTotalUpTime,
cdbpLocalResetTime,
cdbpLocalConfigReset,
cdbpLocalApplStorageType,
cdbpLocalApplRowStatus,
cdbpAppAdvToPeerServices,
cdbpAppAdvToPeerStorageType,
cdbpAppAdvToPeerRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration common
to the server."
::= { ciscoDiameterBasePMIBGroups 6 }
ciscoDiameterBasePMIBLocalStatsSkippedGroup OBJECT-GROUP
OBJECTS {
cdbpLocalStatsTotalPacketsIn,
cdbpLocalStatsTotalPacketsOut,
cdbpLocalStatsTotalUpTime,
cdbpLocalResetTime,
cdbpLocalConfigReset
}
STATUS current
DESCRIPTION
"A collection of objects providing statistics common
to the server."
::= { ciscoDiameterBasePMIBGroups 7 }
ciscoDiameterBasePMIBPeerCfgSkippedGroup OBJECT-GROUP
OBJECTS { cdbpAppAdvFromPeerType }
STATUS current
DESCRIPTION
"A collection of objects providing configuration for
Diameter peers."
::= { ciscoDiameterBasePMIBGroups 8 }
ciscoDiameterBasePMIBPeerStatsSkippedGroup OBJECT-GROUP
OBJECTS {
cdbpPeerStatsDWCurrentStatus,
cdbpPeerStatsDWReqTimer,
cdbpPeerStatsRedirectEvents,
cdbpPeerStatsAccDupRequests,
cdbpPeerStatsEToEDupMessages
}
STATUS current
DESCRIPTION
"A collection of objects providing statistics
of Diameter peers."
::= { ciscoDiameterBasePMIBGroups 9 }
ciscoDiameterBasePMIBRealmCfgSkippedGroup OBJECT-GROUP
OBJECTS {
cdbpRealmKnownPeers,
cdbpRealmKnownPeersChosen
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration for
realm message routing."
::= { ciscoDiameterBasePMIBGroups 10 }
ciscoDiameterBasePMIBRealmStatsSkippedGroup OBJECT-GROUP
OBJECTS {
cdbpRealmMessageRouteRealm,
cdbpRealmMessageRouteApp,
cdbpRealmMessageRouteType,
cdbpRealmMessageRouteAction,
cdbpRealmMessageRouteACRsIn,
cdbpRealmMessageRouteACRsOut,
cdbpRealmMessageRouteACAsIn,
cdbpRealmMessageRouteACAsOut,
cdbpRealmMessageRouteRARsIn,
cdbpRealmMessageRouteRARsOut,
cdbpRealmMessageRouteRAAsIn,
cdbpRealmMessageRouteRAAsOut,
cdbpRealmMessageRouteSTRsIn,
cdbpRealmMessageRouteSTRsOut,
cdbpRealmMessageRouteSTAsIn,
cdbpRealmMessageRouteSTAsOut,
cdbpRealmMessageRouteASRsIn,
cdbpRealmMessageRouteASRsOut,
cdbpRealmMessageRouteASAsIn,
cdbpRealmMessageRouteASAsOut,
cdbpRealmMessageRouteAccRetrans,
cdbpRealmMessageRouteAccDupReqsts,
cdbpRealmMessageRoutePendReqstsOut,
cdbpRealmMessageRouteReqstsDrop
}
STATUS current
DESCRIPTION
"A collection of objects providing statistics
of realm message routing."
::= { ciscoDiameterBasePMIBGroups 11 }
END
Reference in New Issue View Git Blame Copy Permalink