MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-BSTUN-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

921 lines
30 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- BSTUN-MIB.my: Blocked Serial Tunnel MIB file
--
-- Nov 1994, Derek Bolton
-- Jan 1995, Sandy Logie
--
-- Copyright (c) 1995-1997, 2001, 2003 by cisco Systems, Inc.
-- Prepared by Metaplex
-- All rights reserved.
--
-- *****************************************************************
CISCO-BSTUN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Counter32, Integer32, IpAddress
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
ifIndex, InterfaceIndex
FROM IF-MIB
TruthValue
FROM SNMPv2-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoBstunMIB MODULE-IDENTITY
LAST-UPDATED "200302100000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-bisync@cisco.com"
DESCRIPTION
"The MIB module for Block Serial Tunneling.
Overview of BSTUN MIB
MIB description
The BSTUN MIB provides the configuration and operational information
on Cisco's blocked serial tunnelling implementation. The following
entities are managed:
1) Global BSTUN information
2) BSTUN groups
3) BSTUN ports
4) BSTUN routes
The following example configuration shows how the BSTUN MIB returns
BSTUN information, from either CISCO A or CISCO B.
HOST == BSC == Cisco A == IP Network == Cisco B == BSC == BSC
line line device
1) The BSTUN global entry identifies the IP address by which the
router is known to other BSTUN peers, a configurable SAP value
on which to listen to LLC2 peers, and keepalive values to maintain
a session between TCP/IP peers.
2) The BSTUN group table identifies the BSTUN group number and protocol
type that Cisco A and Cisco B use to route BSC traffic over the
IP network. The table contains an entry for each BSTUN group
defined on the router. (The group number must be the same in Cisco A
and Cisco B, for traffic to flow from one router to the other.)
3) The BSTUN port table identifies the serial interface to the BSC
line for which the router is doing serial tunnelling. The MIB also
identifies the BSTUN group this interface is defined for, and
identifies the default routing for unrecognized BSC addresses.
There is a port entry for each BSTUN-enabled interface on the router.
4) The BSTUN route table has an entry for each address defined for
routing within the BSTUN group, and an entry for the default routing
if the 'bstun route all' command is configured. The route entry
includes identification of the BSTUN peer, priority, state, and
packet and byte counters.
"
REVISION "200302100000Z"
DESCRIPTION
"Added Asynchronous POS to IP conversion support"
REVISION "200106190000Z"
DESCRIPTION
"Added Bisync to IP conversion peer support"
REVISION "9701220000Z"
DESCRIPTION
"Added frame-relay and other support"
REVISION "9508210000Z"
DESCRIPTION
"Minor cleanups to pacify mib compiler."
::= { ciscoMgmt 35 }
bstunObjects OBJECT IDENTIFIER ::= { ciscoBstunMIB 1}
bstunGlobal OBJECT IDENTIFIER ::= { bstunObjects 1}
bstunGroups OBJECT IDENTIFIER ::= { bstunObjects 2}
bstunPorts OBJECT IDENTIFIER ::= { bstunObjects 3}
bstunRoutes OBJECT IDENTIFIER ::= { bstunObjects 4}
-- *********************************************************************
-- * global values for router
-- *********************************************************************
bstunIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured IP address used by the BSTUN component in
this router."
::= { bstunGlobal 1 }
bstunLisnSap OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Listening SAP address used by the BSTUN
component when routed via frame-relay local-ack in
this router."
::= { bstunGlobal 2 }
bstunPeerKeepaliveInterval OBJECT-TYPE
SYNTAX Integer32 (1..300)
UNITS "deciseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interval between keepalives in this router."
::= { bstunGlobal 3 }
bstunPeerKeepaliveLimit OBJECT-TYPE
SYNTAX Integer32 (2..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of keepalives which can be missed in a continuous
interval before session declared down in this router."
::= { bstunGlobal 4 }
-- *********************************************************************
-- * bstun Group Table
-- *********************************************************************
bstunGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF BstunGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of entries representing BSTUN groups configured on the
router. Each BSTUN-enabled interface is assigned to a BSTUN
group, and packets can only travel between BSTUN-enabled
interfaces in the same group."
::= { bstunGroups 1 }
bstunGroupEntry OBJECT-TYPE
SYNTAX BstunGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Status and parameter values for a group."
INDEX { bstunGroupIndex }
::= { bstunGroupTable 1 }
BstunGroupEntry ::=
SEQUENCE {
bstunGroupIndex
INTEGER,
bstunProtocolType
INTEGER,
bstunLocalAck
TruthValue,
bstunGroupUnroutableTransmit
Counter32,
bstunGroupUnroutableReceive
Counter32
}
bstunGroupIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configured BSTUN group number. The significance of this
number is that it must match the BSTUN group number configured in
the router at the other end of the BSTUN tunnel."
::= { bstunGroupEntry 1 }
bstunProtocolType OBJECT-TYPE
SYNTAX INTEGER {
bsc(1), -- Binary Synchronous Communications
adtVariPoll(2),
adtPollSelect(3),
adplex(4),
diebold(5),
asyncGeneric(6),
mdi(7),
mosec(8),
gddb(9),
apos(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol type for this BSTUN group."
::= { bstunGroupEntry 2 }
bstunLocalAck OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the BSTUN connection is locally acknowledged.
TRUE-> BSTUN connection is locally acknowledged
FALSE-> BSTUN connection is not locally acknowledged
"
::= { bstunGroupEntry 3 }
bstunGroupUnroutableTransmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unroutable frames received
by this group from the remote partner. They
were unroutable because the address was not
recognized; that is there is no bstun route command
configured for this address. This indicates that the
configuration in this router is incompatible with the
peer router."
::= { bstunGroupEntry 4 }
bstunGroupUnroutableReceive OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of frames received from a serial
interface with an unsupported poll address.
Note that there may be several ports configured
within this bstun group; a non-zero value in this
field indicates that a least one of these ports
is receiving frames for which there are no
bstun route commands configured. This indicates that
the configuration in this router is incompatible with
the configuration in at least one of the attached devices."
::= { bstunGroupEntry 5 }
-- *********************************************************************
-- * bstun Port Table
-- *********************************************************************
bstunPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF BstunPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of BSTUN-enabled interfaces (ports)."
::= { bstunPorts 1 }
bstunPortEntry OBJECT-TYPE
SYNTAX BstunPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Status and parameter values for a BSTUN port."
INDEX { ifIndex }
::= { bstunPortTable 1 }
BstunPortEntry ::=
SEQUENCE {
bstunPortGroupNumber
INTEGER,
bstunPortDefaultPeerType
INTEGER,
bstunPortDefaultPeerIP
IpAddress,
bstunPortDefaultPeerSerial
InterfaceIndex
}
bstunPortGroupNumber OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group number to which the bstun port
belongs. Frames will only be routed to other
ports (on this or another router) in the same
bstun group. This group should match a bstunGroupIndex
in the bstunGroupTable."
::= { bstunPortEntry 1 }
bstunPortDefaultPeerType OBJECT-TYPE
SYNTAX INTEGER { none(1), ip(2), serial(3), serialDirect(4),
serialFrameRelay(5), serialLLC2(6) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of identification of the remote default partner.
(This is as configured with the 'route all' command.)
If ip then the value is in bstunPortDefaultPeerIP; if serial or
serialDirect then the value is in bstunPortDefaultPeerSerial."
::= { bstunPortEntry 2 }
bstunPortDefaultPeerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ip address of the remote default BSTUN partner,
for unrecognized addresses.
0.0.0.0 if partner address type is not ip."
::= { bstunPortEntry 3 }
bstunPortDefaultPeerSerial OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If bstunRouteType is serial then this is the
serial interface index of the point-to-point
link to the remote partner;
if bstunRouteType is serialDirect then the
partner is in the local BSTUN.
if bstunRouteType is ip then this field is
0."
::= { bstunPortEntry 4 }
-- *********************************************************************
-- * Route Table
-- *********************************************************************
bstunRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF BstunRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about specific poll
addresses. There is one table entry for each
address configured by the BSTUN ROUTE command."
::= { bstunRoutes 1 }
bstunRouteEntry OBJECT-TYPE
SYNTAX BstunRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single poll address."
INDEX { bstunRouteGroupIndex, bstunRouteStationAddress }
::= { bstunRouteTable 1 }
BstunRouteEntry ::=
SEQUENCE {
bstunRouteGroupIndex
INTEGER,
bstunRouteStationAddress
INTEGER,
bstunRouteType
INTEGER,
bstunRouteIP
IpAddress,
bstunRouteSerial
InterfaceIndex,
bstunRoutePriority
INTEGER,
bstunRoutePeerState
INTEGER,
bstunRouteRxPackets
Counter32,
bstunRouteTxPackets
Counter32,
bstunRouteRxBytes
Counter32,
bstunRouteTxBytes
Counter32,
bstunRouteDLCI
Integer32,
bstunRouteRSAP
Integer32,
bstunLLC2Priority
Integer32,
bstunRouteBIPPassive
TruthValue,
bstunRouteBIPLocalPort
Integer32,
bstunRouteBIPForeignPort
Integer32,
bstunRouteBIPDeviceStatus
BITS,
bstunRouteAPIPHeaderVersion
INTEGER
}
bstunRouteGroupIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the BSTUN Group owning this
station."
::= { bstunRouteEntry 1 }
bstunRouteStationAddress OBJECT-TYPE
SYNTAX INTEGER (1..256)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The poll address of the station. 256 indicates the ALL parameter
on the STUN ROUTE command, which is the route for all
unrecognized addresses."
::= { bstunRouteEntry 2 }
bstunRouteType OBJECT-TYPE
SYNTAX INTEGER { none(1), ip(2), serial(3), serialDirect(4),
serialFrameRelay(5), serialLLC2(6), bip(7),
apip(8) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of identification of the remote partner.
If ip then the value is in bstunRouteIP; if serial or
serialDirect then the value is in bstunRouteSerial; if
bip or apip then the value is in bstunRouteIP,
bstunRouteBIPLocalPort and bstunRouteBIPForeignPort."
::= { bstunRouteEntry 3 }
bstunRouteIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ip address of the remote BSTUN partner.
0.0.0.0 if partner address type is not ip."
::= { bstunRouteEntry 4 }
bstunRouteSerial OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If bstunRouteType is serial then this is the
serial interface index of the point-to-point
link to the remote partner;
if bstunRouteType is serialDirect then the
partner is in the local BSTUN.
if bstunRouteType is ip then this field is
0."
::= { bstunRouteEntry 5 }
bstunRoutePriority OBJECT-TYPE
SYNTAX INTEGER {low(1), normal(2), medium(3), high(4)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority with which this station's traffic will
be routed across the network."
::= { bstunRouteEntry 6 }
bstunRoutePeerState OBJECT-TYPE
SYNTAX INTEGER {dead(1), closed(2), opening(3), openWait(4),
connected(5), direct(6)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the peer connection through the
BSTUN tunnel."
::= { bstunRouteEntry 7 }
bstunRouteRxPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of frames received from the serial
interface with this station's address."
::= { bstunRouteEntry 8 }
bstunRouteTxPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of frames transmitted at the serial
interface with this station's address."
::= { bstunRouteEntry 9 }
bstunRouteRxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of bytes received from the serial
interface with this station's address."
::= { bstunRouteEntry 10 }
bstunRouteTxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of bytes transmitted at the serial
interface with this station's address."
::= { bstunRouteEntry 11 }
bstunRouteDLCI OBJECT-TYPE
SYNTAX Integer32 (16..1007)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If bstunRouteType is serialFrameRelay or serialLLC2
then this is the frame relay dlci circuit used for
the point-to-point link to the remote partner;
if bstunRouteType is ip or serial then this field is
0."
::= { bstunRouteEntry 12 }
bstunRouteRSAP OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If bstunRouteType is serialLLC2 then this
is the llc2 sap value used for the point-to-point
link to the remote partner;
if bstunRouteType is ip or serial or serialFrameRelay
then this field is 0."
::= { bstunRouteEntry 13 }
bstunLLC2Priority OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If bstunRouteType is serialLLC2 then this
is the llc2 priority used for the point-to-point
link to the remote partner;
if bstunRouteType is ip or serial or serialFrameRelay
then this field is 0."
::= { bstunRouteEntry 14 }
bstunRouteBIPPassive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether the bip peer will wait for an inbound connection
or actively connect to the remote peer."
DEFVAL { false }
::= { bstunRouteEntry 15 }
bstunRouteBIPLocalPort OBJECT-TYPE
SYNTAX Integer32 (1025..32000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If bstunRouteType is bip then this is the local port used when
connecting to the remote peer."
::= { bstunRouteEntry 16 }
bstunRouteBIPForeignPort OBJECT-TYPE
SYNTAX Integer32 (1025..32000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If bstunRouteType is bip then this is the for port used to
connect to the remote peer."
::= { bstunRouteEntry 17 }
bstunRouteBIPDeviceStatus OBJECT-TYPE
SYNTAX BITS { operationcheck(0), reservedBit1(1),
datacheck(2), equipmentcheck(3),
interventionrequired(4), commandreject(5),
deviceinactive(6), deviceactive(7),
reservedBit8(8), deviceend(9),
unitspecify(10), devicebusy(11) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If bstunRouteType is bip then this indicates the OR bit mask
status of the mapped bisync device:
if no bits are set, indicates that the
bisync device is up and operational.
Bit 0, if set, indicates that the bisync device is
reporting an operation check error.
Bit 2, if set, indicates that the bisync device is
reporting a data check error.
Bit 3, if set, indicates that the bisync device is
reporting an equipment check error.
Bit 4, if set, indicates that the bisync device is
reporting that intervention is required.
Bit 5, if set, indicates that the bisync device is
reporting that a command has been rejected.
Bit 6, if set, indicates that the bisync device is
not responding to polls.
Bit 7, if set, indicates that the bisync device is
now responding to polls and is operational.
Bit 9, if set, indicates that the bisync device is
reporting that is no longer busy.
Bit 10, if set, indicates that the bisync device is
reporting a device unit specify.
Bit 11, if set, indicates that the bisync device is
reporting a busy condition."
::= { bstunRouteEntry 18 }
bstunRouteAPIPHeaderVersion OBJECT-TYPE
SYNTAX INTEGER {v0(1), v1(2), v2(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the tunneling header format to use for APIP:
v0, if set, indicates a 2 byte encapsulation header.
The length of the header is included in the size of
the sent packet.
v1, if set, indicates a 2 byte encapsulation header.
The length of the header is excluded from the size of
the sent packet.
v2, if set, indicates a 4 byte encapsulation header.
The length of the header is excluded from the size of
the sent packet."
::= { bstunRouteEntry 19 }
-- *************************************************************************
-- * BSTUN notifications
-- *************************************************************************
bstunNotificationPrefix OBJECT IDENTIFIER ::= { ciscoBstunMIB 2 }
bstunNotifications OBJECT IDENTIFIER ::= { bstunNotificationPrefix 0 }
bstunPeerStateChangeNotification NOTIFICATION-TYPE
OBJECTS { bstunRoutePeerState }
STATUS deprecated
DESCRIPTION
"This notification indicates that the state of a BSTUN route
has transitioned to active (connected) or inactive
(dead or closed)."
::= { bstunNotifications 1 }
bstunPeerStateChangeNotification2 NOTIFICATION-TYPE
OBJECTS { bstunRoutePeerState,
bstunRouteType,
bstunRouteRxPackets,
bstunRouteTxPackets }
STATUS current
DESCRIPTION
"This notification indicates that the state of a BSTUN route
has transitioned to active (connected) or inactive
(dead or closed)."
::= { bstunNotifications 2 }
bstunCUStatusChangeNotification NOTIFICATION-TYPE
OBJECTS { bstunRouteIP,
bstunRouteBIPForeignPort,
bstunRouteBIPLocalPort,
bstunRouteBIPDeviceStatus }
STATUS current
DESCRIPTION
"This notification is generated when a mapped BIP bisync
device state has changed."
::= { bstunNotifications 3 }
-- *************************************************************************
-- * Conformance Information
-- *************************************************************************
--
bstunMibConformance OBJECT IDENTIFIER ::= { ciscoBstunMIB 3 }
bstunMibCompliances OBJECT IDENTIFIER ::= { bstunMibConformance 1 }
bstunMibGroups OBJECT IDENTIFIER ::= { bstunMibConformance 2 }
--
-- *************************************************************************
-- * Compliance Statements
-- *************************************************************************
bstunMibCompliance MODULE-COMPLIANCE
STATUS obsolete -- superceded by bstunMibComplianceRev1
DESCRIPTION
"The compliance statement for BSTUN."
MODULE -- this module
MANDATORY-GROUPS {
bstunGlobalGroup,
bstunGroupGroup,
bstunPortGroup,
bstunRouteGroup
}
::= { bstunMibCompliances 1 }
bstunMibComplianceRev1 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for all Cisco systems that
implement BSTUN functions."
MODULE -- this module
MANDATORY-GROUPS {
bstunGlobalGroupRev1,
bstunGroupGroup,
bstunPortGroup,
bstunRouteGroupRev1
}
::= { bstunMibCompliances 2 }
bstunMibComplianceRev2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for all Cisco systems that
implement BSTUN functions."
MODULE -- this module
MANDATORY-GROUPS {
bstunGlobalGroupRev1,
bstunGroupGroup,
bstunPortGroup,
bstunRouteGroupRev2,
bstunNotificationGroupRev1
}
::= { bstunMibCompliances 3 }
bstunMibComplianceRev3 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for all Cisco systems that
implement BSTUN functions."
MODULE -- this module
MANDATORY-GROUPS {
bstunGlobalGroupRev1,
bstunGroupGroup,
bstunPortGroup,
bstunRouteGroupRev1,
bstunNotificationGroupRev1
}
GROUP bstunRouteBipGroup
DESCRIPTION
"This group is mandatory when implementing
the bip route type."
GROUP bstunRoutePortsGroup
DESCRIPTION
"This group is mandatory when implementing
the bip or apip route types."
GROUP bstunRouteApipGroup
DESCRIPTION
"This group is mandatory when implementing
the apip route type."
::= { bstunMibCompliances 4 }
bstunGlobalGroup OBJECT-GROUP
OBJECTS {
bstunIPAddr
}
STATUS obsolete -- superceded by bstunGlobalGroupRev1
DESCRIPTION
"A collection of objects providing global BSTUN information."
::= { bstunMibGroups 1}
bstunGroupGroup OBJECT-GROUP
OBJECTS {
bstunProtocolType,
bstunLocalAck,
bstunGroupUnroutableTransmit,
bstunGroupUnroutableReceive
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
BSTUN groups ."
::= { bstunMibGroups 2 }
bstunPortGroup OBJECT-GROUP
OBJECTS {
bstunPortGroupNumber,
bstunPortDefaultPeerType,
bstunPortDefaultPeerIP,
bstunPortDefaultPeerSerial
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
BSTUN enabled interfaces."
::= { bstunMibGroups 3}
bstunRouteGroup OBJECT-GROUP
OBJECTS {
bstunRouteType,
bstunRouteIP,
bstunRouteSerial,
bstunRoutePriority,
bstunRoutePeerState,
bstunRouteRxPackets,
bstunRouteTxPackets,
bstunRouteRxBytes,
bstunRouteTxBytes
}
STATUS obsolete -- superceded by bstunRouteGroupRev1
DESCRIPTION
"A collection of objects providing information about
BSTUN defined routes."
::= { bstunMibGroups 4}
bstunGlobalGroupRev1 OBJECT-GROUP
OBJECTS {
bstunIPAddr,
bstunLisnSap,
bstunPeerKeepaliveInterval,
bstunPeerKeepaliveLimit
}
STATUS current
DESCRIPTION
"A collection of objects providing global BSTUN information."
::= { bstunMibGroups 5}
bstunRouteGroupRev1 OBJECT-GROUP
OBJECTS {
bstunRouteType,
bstunRouteIP,
bstunRouteSerial,
bstunRoutePriority,
bstunRoutePeerState,
bstunRouteRxPackets,
bstunRouteTxPackets,
bstunRouteRxBytes,
bstunRouteTxBytes,
bstunRouteDLCI,
bstunRouteRSAP,
bstunLLC2Priority
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
BSTUN defined routes."
::= { bstunMibGroups 6}
bstunRouteGroupRev2 OBJECT-GROUP
OBJECTS {
bstunRouteType,
bstunRouteIP,
bstunRouteSerial,
bstunRoutePriority,
bstunRoutePeerState,
bstunRouteRxPackets,
bstunRouteTxPackets,
bstunRouteRxBytes,
bstunRouteTxBytes,
bstunRouteDLCI,
bstunRouteRSAP,
bstunLLC2Priority,
bstunRouteBIPPassive,
bstunRouteBIPLocalPort,
bstunRouteBIPForeignPort,
bstunRouteBIPDeviceStatus
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing information about
BSTUN defined routes."
::= { bstunMibGroups 7}
bstunNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
bstunPeerStateChangeNotification
}
STATUS deprecated
DESCRIPTION
"A collection of notifications. "
::= { bstunMibGroups 8 }
bstunNotificationGroupRev1 NOTIFICATION-GROUP
NOTIFICATIONS {
bstunPeerStateChangeNotification2,
bstunCUStatusChangeNotification
}
STATUS current
DESCRIPTION
"A collection of notifications. "
::= { bstunMibGroups 9 }
bstunRouteBipGroup OBJECT-GROUP
OBJECTS {
bstunRouteBIPPassive,
bstunRouteBIPDeviceStatus
}
STATUS current
DESCRIPTION
"A objects providing information about
BSTUN defined routes for BIP protocol."
::= { bstunMibGroups 10}
bstunRoutePortsGroup OBJECT-GROUP
OBJECTS {
bstunRouteBIPLocalPort,
bstunRouteBIPForeignPort
}
STATUS current
DESCRIPTION
"A objects providing port number informaton information
about BSTUN defined routes for BIP and APIP protocols."
::= { bstunMibGroups 11}
bstunRouteApipGroup OBJECT-GROUP
OBJECTS {
bstunRouteAPIPHeaderVersion
}
STATUS current
DESCRIPTION
"A objects providing information about
BSTUN defined routes for APIP protocol."
::= { bstunMibGroups 12}
END
Reference in New Issue View Git Blame Copy Permalink