MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-ATM-PVCTRAP-EXTN-CAPABILITY.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

857 lines
43 KiB
Plaintext
Raw Blame History

-- *****************************************************************
--
-- AGENT-CAPABILITIES mib for CISCO-ATM-PVCTRAP-EXTN-MIB
--
-- October 2002, Hrishikesh Kulkarni
--
-- Copyright (c) 2002 by Cisco Systems, Inc.
--
-- *****************************************************************
CISCO-ATM-PVCTRAP-EXTN-CAPABILITY DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY
FROM SNMPv2-SMI
AGENT-CAPABILITIES
FROM SNMPv2-CONF
ciscoAgentCapability
FROM CISCO-SMI;
ciscoATMPVCTRAPExtnCapability MODULE-IDENTITY
LAST-UPDATED "200211060000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-atm@cisco.com"
DESCRIPTION
"The Agent Capabilities for
CISCO-ATM-PVCTRAP-EXTN-MIB."
REVISION "200211060000Z"
DESCRIPTION
"Initial version of the MIB Module."
::= { ciscoAgentCapability 289 }
ciscoATMPVCTRAPExtnCapabilityV12R00S AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco IOS 12.0S"
STATUS current
DESCRIPTION "CISCO-ATM-PVCTRAP-EXTN-MIB Capabilities"
SUPPORTS CISCO-ATM-PVCTRAP-EXTN-MIB
INCLUDES { ciscoAtmPvcTrapExtnGroup,
ciscoAtmPvcTrapExtnNotifGroup1 }
VARIATION catmIntfPvcOAMFailureTrap -- TRAP-TYPE
-- OBJECTS { ifIndex,
-- catmIntfOAMFailedPVcls,
-- catmIntfCurrentOAMFailingPVcls,
-- atmVclVpi,
-- atmVclVci,
-- catmPVclStatusTransition,
-- catmPVclStatusChangeStart,
-- catmPVclStatusChangeEnd,
-- catmStatusChangePVclRangeIndex,
-- catmPVclLowerRangeValue,
-- catmPVclHigherRangeValue,
-- catmPVclRangeStatusChangeStart,
-- catmPVclRangeStatusChangeEnd }
DESCRIPTION "A catmIntfPvcOAMFailureTrap signifies that the
loopback F5 OAM failure is detected on the PVC in
the last PVC TRAP notification interval.
If the set of loopback failed PVCs contains
successive VCIs, then the varbinds sent in this
TRAP contains information about ranges
representing these groups of PVCs. In this
case, the atmVclVpi,
catmStatusChangePVclRangeIndex,
catmPVclLowerRangeValue,
catmPVclHigherRangeValue,
catmPVclRangeStatusChangeStart,
catmPVclRangeStatusChangeEnd are used.
If the set of loopback failed PVCs contains
singled out PVCs (i.e. PVC with VPI1, VCI1 is
contained in the set; but neither a PVC with VPI1
and VCI1 - 1 nor a PVC with VPI1 and VCI1 + 1 is
contained in the set of loopback failed PVCs)
then the varbinds sent in this notification
contains information about the individual PVCs.
In this case, the atmVclVpi, atmVclVci,
catmPVclStatusTransition,
catmPVclStatusChangeStart,
catmPVclStatusChangeEnd will be used.
In the case where the set of loopback failed PVCs
contains both successive and singled out PVCs
both sets of objects will be used."
::= { ciscoATMPVCTRAPExtnCapability 1 }
VARIATION catmIntfPvcSegCCOAMFailureTrap -- TRAP-TYPE
-- OBJECTS { ifIndex,
-- catmIntfSegCCOAMFailedPVcls,
-- catmIntfCurSegCCOAMFailingPVcls,
-- atmVclVpi,
-- atmVclVci,
-- catmPVclSegCCStatusTransition,
-- catmPVclSegCCStatusChangeStart,
-- catmPVclSegCCStatusChangeEnd,
-- catmStatusChangePVclRangeIndex,
-- catmPVclSegCCLowerRangeValue,
-- catmPVclSegCCHigherRangeValue,
-- catmPVclSegCCRangeStatusChStart,
-- catmPVclSegCCRangeStatusChEnd }
DESCRIPTION "A catmIntfPvcSegCCOAMFailureTrap signifies that
the segment CC F5 OAM failure is detected on
the PVC in the last PVC TRAP notification
interval.
If the set of segment CC failed PVCs contains
successive VCIs, then the varbinds sent in this
TRAP contains information about ranges
representing these groups of PVCs. In this
case, the atmVclVpi,
catmStatusChangePVclRangeIndex,
catmPVclSegCCLowerRangeValue,
catmPVclSegCCHigherRangeValue,
catmPVclSegCCRangeStatusChStart,
catmPVclSegCCRangeStatusChEnd are used.
If the set of segment CC failed PVCs contains
singled out PVCs (i.e. PVC with VPI1, VCI1 is
contained in the set; but neither a PVC with VPI1
and VCI1 - 1 nor a PVC with VPI1 and VCI1 + 1 is
contained in the set of segment CC failed PVCs)
then the varbinds sent in this notification
contains information about the individual PVCs.
In this case, the atmVclVpi, atmVclVci,
catmPVclSegCCStatusTransition,
catmPVclSegCCStatusChangeStart,
catmPVclSegCCStatusChangeEnd will be used.
In the case where the set of segment CC failed
PVCs contains both successive and singled out
PVCs, both sets of objects will be used."
::= { ciscoATMPVCTRAPExtnCapability 2 }
VARIATION catmIntfPvcEndCCOAMFailureTrap -- TRAP-TYPE
-- OBJECTS { ifIndex,
-- catmIntfEndCCOAMFailedPVcls,
-- catmIntfCurEndCCOAMFailingPVcls,
-- atmVclVpi,
-- atmVclVci,
-- catmPVclEndCCStatusTransition,
-- catmPVclEndCCStatusChangeStart,
-- catmPVclEndCCStatusChangeEnd,
-- catmStatusChangePVclRangeIndex,
-- catmPVclEndCCLowerRangeValue,
-- catmPVclEndCCHigherRangeValue,
-- catmPVclEndCCRangeStatusChStart,
-- catmPVclEndCCRangeStatusChEnd }
DESCRIPTION "A catmIntfPvcEndCCOAMFailureTrap signifies that
the End CC F5 OAM failure is detected on the
PVC in the last PVC TRAP notification interval.
If the set of End CC failed PVCs contains
successive VCIs, then the varbinds sent in this
TRAP contains information about ranges
representing these groups of PVCs. In this
case, the atmVclVpi,
catmStatusChangePVclRangeIndex,
catmPVclEndCCLowerRangeValue,
catmPVclEndCCHigherRangeValue,
catmPVclEndCCRangeStatusChStart,
catmPVclEndCCRangeStatusChEnd are used.
If the set of End CC failed PVCs contains
singled out PVCs (i.e. PVC with VPI1, VCI1 is
contained in the set; but neither a PVC with VPI1
and VCI1 - 1 nor a PVC with VPI1 and VCI1 + 1 is
contained in the set of End CC failed PVCs)
then the varbinds sent in this notification
contains information about the individual PVCs.
In this case, the atmVclVpi, atmVclVci,
catmPVclEndCCStatusTransition,
catmPVclEndCCStatusChangeStart,
catmPVclEndCCStatusChangeEnd will be used.
In the case where the set of End CC failed PVCs
contains both successive and singled out PVCs,
both sets of objects will be used."
::= { ciscoATMPVCTRAPExtnCapability 3 }
VARIATION catmIntfPvcAISRDIOAMFailureTrap -- TRAP-TYPE
-- OBJECTS { ifIndex,
-- catmIntfAISRDIOAMFailedPVcls,
-- catmIntfCurAISRDIOAMFailingPVcls,
-- atmVclVpi,
-- atmVclVci,
-- catmPVclAISRDIStatusTransition,
-- catmPVclAISRDIStatusChangeStart,
-- catmPVclAISRDIStatusChangeEnd,
-- catmStatusChangePVclRangeIndex,
-- catmPVclAISRDILowerRangeValue,
-- catmPVclAISRDIHigherRangeValue,
-- catmPVclAISRDIRangeStatusChStart,
-- catmPVclAISRDIRangeStatusChEnd }
DESCRIPTION "A catmIntfPvcAISRDIOAMFailureTrap signifies
that the AIS/RDI F5 OAM failure is detected
on the PVC in the last PVC TRAP notification
interval.
If the set of AIS/RDI failed PVCs contains
successive VCIs, then the varbinds sent in this
TRAP contains information about ranges
representing these groups of PVCs. In this
case, the atmVclVpi,
catmStatusChangePVclRangeIndex,
catmPVclAISRDILowerRangeValue,
catmPVclAISRDIHigherRangeValue,
catmPVclAISRDIRangeStatusChStart,
catmPVclAISRDIRangeStatusChEnd are used.
If the set of AIS/RDI failed PVCs contains
singled out PVCs (i.e. PVC with VPI1, VCI1 is
contained in the set; but neither a PVC with VPI1
and VCI1 - 1 nor a PVC with VPI1 and VCI1 + 1 is
contained in the set of AIS/RDI failed PVCs)
then the varbinds sent in this notification
contains information about the individual PVCs.
In this case, the atmVclVpi, atmVclVci,
catmPVclAISRDIStatusTransition,
catmPVclAISRDIStatusChangeStart,
catmPVclAISRDIStatusChangeEnd will be used.
In the case where the set of AIS/RDI failed PVCs
contains both successive and singled out PVCs,
both sets of objects will be used."
::= { ciscoATMPVCTRAPExtnCapability 4 }
VARIATION catmIntfPvcAnyOAMFailureTrap -- TRAP-TYPE
-- OBJECTS { ifIndex,
-- catmIntfAnyOAMFailedPVcls,
-- catmIntfCurAnyOAMFailingPVcls,
-- catmIntfTypeOfOAMFailure,
-- atmVclVpi,
-- atmVclVci,
-- catmPVclStatusTransition,
-- catmPVclStatusChangeStart,
-- catmPVclStatusChangeEnd,
-- catmStatusChangePVclRangeIndex,
-- catmPVclLowerRangeValue,
-- catmPVclHigherRangeValue,
-- catmPVclRangeStatusChangeStart,
-- catmPVclRangeStatusChangeEnd,
-- catmPVclSegCCStatusTransition,
-- catmPVclSegCCStatusChangeStart,
-- catmPVclSegCCStatusChangeEnd,
-- catmStatusChangePVclRangeIndex,
-- catmPVclSegCCLowerRangeValue,
-- catmPVclSegCCHigherRangeValue,
-- catmPVclSegCCRangeStatusChStart,
-- catmPVclSegCCRangeStatusChEnd,
-- catmPVclEndCCStatusTransition,
-- catmPVclEndCCStatusChangeStart,
-- catmPVclEndCCStatusChangeEnd,
-- catmStatusChangePVclRangeIndex,
-- catmPVclEndCCLowerRangeValue,
-- catmPVclEndCCHigherRangeValue,
-- catmPVclEndCCRangeStatusChStart,
-- catmPVclEndCCRangeStatusChEnd,
-- catmPVclAISRDIStatusTransition,
-- catmPVclAISRDIStatusChangeStart,
-- catmPVclAISRDIStatusChangeEnd,
-- catmStatusChangePVclRangeIndex,
-- catmPVclAISRDILowerRangeValue,
-- catmPVclAISRDIHigherRangeValue,
-- catmPVclAISRDIRangeStatusChStart,
-- catmPVclAISRDIRangeStatusChEnd }
DESCRIPTION "A catmIntfPvcAnyOAMFailureTrap signifies that the
one or more type of F5 OAM failure is detected on
the PVC in the last PVC TRAP notification
interval.
The type of F5 OAM failure can be
Loopback F5 OAM failure,
Segment CC F5 OAM failure,
End CC F5 OAM failure,
AIS/RDI F5 OAM failure.
If the set of loopback failed PVCs contains
successive VCIs, then the varbinds sent in this
TRAP contains information about ranges
representing these groups of PVCs. In this
case, the atmVclVpi,
catmStatusChangePVclRangeIndex,
catmPVclLowerRangeValue,
catmPVclHigherRangeValue,
catmPVclRangeStatusChangeStart,
catmPVclRangeStatusChangeEnd are used.
If the set of loopback failed PVCs contains
singled out PVCs (i.e. PVC with VPI1, VCI1 is
contained in the set; but neither a PVC with VPI1
and VCI1 - 1 nor a PVC with VPI1 and VCI1 + 1 is
contained in the set of loopback failed PVCs)
then the varbinds sent in this notification
contains information about the individual PVCs.
In this case, the atmVclVpi, atmVclVci,
catmPVclStatusTransition,
catmPVclStatusChangeStart,
catmPVclStatusChangeEnd will be used.
In the case where the set of loopback failed PVCs
contains both successive and singled out PVCs
both sets of objects will be used.
If the set of segment CC failed PVCs contains
successive VCIs, then the varbinds sent in this
TRAP contains information about ranges
representing these groups of PVCs. In this
case, the atmVclVpi,
catmStatusChangePVclRangeIndex,
catmPVclSegCCLowerRangeValue,
catmPVclSegCCHigherRangeValue,
catmPVclSegCCRangeStatusChStart,
catmPVclSegCCRangeStatusChEnd are used.
If the set of segment CC failed PVCs contains
singled out PVCs (i.e. PVC with VPI1, VCI1 is
contained in the set; but neither a PVC with VPI1
and VCI1 - 1 nor a PVC with VPI1 and VCI1 + 1 is
contained in the set of segment CC failed PVCs)
then the varbinds sent in this notification
contains information about the individual PVCs.
In this case, the atmVclVpi, atmVclVci,
catmPVclSegCCStatusTransition,
catmPVclSegCCStatusChangeStart,
catmPVclSegCCStatusChangeEnd will be used.
In the case where the set of segment CC failed
PVCs contains both successive and singled out
PVCs, both sets of objects will be used.
If the set of End CC failed PVCs contains
successive VCIs, then the varbinds sent in this
TRAP contains information about ranges
representing these groups of PVCs. In this
case, the atmVclVpi,
catmStatusChangePVclRangeIndex,
catmPVclEndCCLowerRangeValue,
catmPVclEndCCHigherRangeValue,
catmPVclEndCCRangeStatusChStart,
catmPVclEndCCRangeStatusChEnd are used.
If the set of End CC failed PVCs contains
singled out PVCs (i.e. PVC with VPI1, VCI1 is
contained in the set; but neither a PVC with VPI1
and VCI1 - 1 nor a PVC with VPI1 and VCI1 + 1 is
contained in the set of End CC failed PVCs)
then the varbinds sent in this notification
contains information about the individual PVCs.
In this case, the atmVclVpi, atmVclVci,
catmPVclEndCCStatusTransition,
catmPVclEndCCStatusChangeStart,
catmPVclEndCCStatusChangeEnd will be used.
In the case where the set of End CC failed PVCs
contains both successive and singled out PVCs,
both sets of objects will be used.
If the set of AIS/RDI failed PVCs contains
successive VCIs, then the varbinds sent in this
TRAP contains information about ranges
representing these groups of PVCs. In this
case, the atmVclVpi,
catmStatusChangePVclRangeIndex,
catmPVclAISRDILowerRangeValue,
catmPVclAISRDIHigherRangeValue,
catmPVclAISRDIRangeStatusChStart,
catmPVclAISRDIRangeStatusChEnd are used.
If the set of AIS/RDI failed PVCs contains
singled out PVCs (i.e. PVC with VPI1, VCI1 is
contained in the set; but neither a PVC with VPI1
and VCI1 - 1 nor a PVC with VPI1 and VCI1 + 1 is
contained in the set of AIS/RDI failed PVCs)
then the varbinds sent in this notification
contains information about the individual PVCs.
In this case, the atmVclVpi, atmVclVci,
catmPVclAISRDIStatusTransition,
catmPVclAISRDIStatusChangeStart,
catmPVclAISRDIStatusChangeEnd will be used.
In the case where the set of AIS/RDI failed PVCs
contains both successive and singled out PVCs,
both sets of objects will be used."
::= { ciscoATMPVCTRAPExtnCapability 5 }
VARIATION catmIntfPvcOAMRecoverTrap -- TRAP-TYPE
-- OBJECTS { ifIndex,
-- catmIntfOAMRcovedPVcls,
-- catmIntfCurrentOAMRcovingPVcls,
-- atmVclVpi,
-- atmVclVci,
-- catmPVclStatusUpTransition,
-- catmPVclStatusUpStart,
-- catmPVclStatusUpEnd,
-- catmStatusChangePVclRangeIndex,
-- catmPVclUpLowerRangeValue,
-- catmPVclUpHigherRangeValue,
-- catmPVclRangeStatusUpStart,
-- catmPVclRangeStatusUpEnd }
DESCRIPTION "A catmIntfPvcOAMRecoverTrap signifies that the
loopback F5 OAM recovery is detected on the PVC in
the last PVC TRAP notification interval.
If the set of loopback recovered PVCs contains
successive VCIs, then the varbinds sent in this
TRAP contains information about ranges
representing these groups of PVCs. In this
case, the atmVclVpi,
catmStatusChangePVclRangeIndex,
catmPVclUpLowerRangeValue,
catmPVclUpHigherRangeValue,
catmPVclRangeStatusUpStart,
catmPVclRangeStatusUpEnd are used.
If the set of loopback recovered PVCs contains
singled out PVCs (i.e. PVC with VPI1, VCI1 is
contained in the set; but neither a PVC with VPI1
and VCI1 - 1 nor a PVC with VPI1 and VCI1 + 1 is
contained in the set of loopback recovered PVCs)
then the varbinds sent in this notification
contains information about the individual PVCs.
In this case, the atmVclVpi, atmVclVci,
catmPVclStatusUpTransition,
catmPVclStatusUpStart,
catmPVclStatusUpEnd will be used.
In the case where the set of loopback recovered
PVCs contains both successive and singled out
PVCs both sets of objects will be used."
::= { ciscoATMPVCTRAPExtnCapability 7 }
VARIATION catmIntfPvcSegCCOAMRecoverTrap -- TRAP-TYPE
-- OBJECTS { ifIndex,
-- catmIntfSegCCOAMRcovedPVcls,
-- catmIntfCurSegCCOAMRcovingPVcls,
-- atmVclVpi,
-- atmVclVci,
-- catmPVclSegCCStatusUpTransition,
-- catmPVclSegCCStatusUpStart,
-- catmPVclSegCCStatusUpEnd,
-- catmStatusChangePVclRangeIndex,
-- catmPVclSegCCUpLowerRangeValue,
-- catmPVclSegCCUpHigherRangeValue,
-- catmPVclSegCCRangeStatusUpStart,
-- catmPVclSegCCRangeStatusUpEnd }
DESCRIPTION "A catmIntfPvcSegCCOAMRecoverTrap signifies that
the segment CC F5 OAM recovery is detected on
the PVC in the last PVC TRAP notification
interval.
If the set of segment CC recovered PVCs contains
successive VCIs, then the varbinds sent in this
TRAP contains information about ranges
representing these groups of PVCs. In this
case, the atmVclVpi,
catmStatusChangePVclRangeIndex,
catmPVclSegCCUpLowerRangeValue,
catmPVclSegCCUpHigherRangeValue,
catmPVclSegCCRangeStatusUpStart,
catmPVclSegCCRangeStatusUpEnd are used.
If the set of segment CC recovered PVCs contains
singled out PVCs (i.e. PVC with VPI1, VCI1 is
contained in the set; but neither a PVC with VPI1
and VCI1 - 1 nor a PVC with VPI1 and VCI1 + 1 is
contained in the set of segment CC recovered PVCs)
then the varbinds sent in this notification
contains information about the individual PVCs.
In this case, the atmVclVpi, atmVclVci,
catmPVclSegCCStatusUpTransition,
catmPVclSegCCStatusUpStart,
catmPVclSegCCStatusUpEnd will be used.
In the case where the set of segment CC recovered
PVCs contains both successive and singled out
PVCs, both sets of objects will be used."
::= { ciscoATMPVCTRAPExtnCapability 8 }
VARIATION catmIntfPvcEndCCOAMRecoverTrap -- TRAP-TYPE
-- OBJECTS { ifIndex,
-- catmIntfEndCCOAMRcovedPVcls,
-- catmIntfCurEndCCOAMRcovingPVcls,
-- atmVclVpi,
-- atmVclVci,
-- catmPVclEndCCStatusUpTransition,
-- catmPVclEndCCStatusUpStart,
-- catmPVclEndCCStatusUpEnd,
-- catmStatusChangePVclRangeIndex,
-- catmPVclEndCCUpLowerRangeValue,
-- catmPVclEndCCUpHigherRangeValue,
-- catmPVclEndCCRangeStatusUpStart,
-- catmPVclEndCCRangeStatusUpEnd }
DESCRIPTION "A catmIntfPvcEndCCOAMRecoverTrap signifies that
the End CC F5 OAM recovery is detected on the
PVC in the last PVC TRAP notification interval.
If the set of End CC recovered PVCs contains
successive VCIs, then the varbinds sent in this
TRAP contains information about ranges
representing these groups of PVCs. In this
case, the atmVclVpi,
catmStatusChangePVclRangeIndex,
catmPVclEndCCUpLowerRangeValue,
catmPVclEndCCUpHigherRangeValue,
catmPVclEndCCRangeStatusUpStart,
catmPVclEndCCRangeStatusUpEnd are used.
If the set of End CC recovered PVCs contains
singled out PVCs (i.e. PVC with VPI1, VCI1 is
contained in the set; but neither a PVC with VPI1
and VCI1 - 1 nor a PVC with VPI1 and VCI1 + 1 is
contained in the set of End CC recovered PVCs)
then the varbinds sent in this notification
contains information about the individual PVCs.
In this case, the atmVclVpi, atmVclVci,
catmPVclEndCCStatusUpTransition,
catmPVclEndCCStatusUpStart,
catmPVclEndCCStatusUpEnd will be used.
In the case where the set of End CC recovered PVCs
contains both successive and singled out PVCs,
both sets of objects will be used."
::= { ciscoATMPVCTRAPExtnCapability 9 }
VARIATION catmIntfPvcAISRDIOAMRecoverTrap -- TRAP-TYPE
-- OBJECTS { ifIndex,
-- catmIntfAISRDIOAMRcovedPVcls,
-- catmIntfCurAISRDIOAMRcovingPVcls,
-- atmVclVpi,
-- atmVclVci,
-- catmPVclAISRDIStatusUpTransition,
-- catmPVclAISRDIStatusUpStart,
-- catmPVclAISRDIStatusUpEnd,
-- catmStatusChangePVclRangeIndex,
-- catmPVclAISRDIUpLowerRangeValue,
-- catmPVclAISRDIUpHigherRangeValue,
-- catmPVclAISRDIRangeStatusUpStart,
-- catmPVclAISRDIRangeStatusUpEnd }
DESCRIPTION "A catmIntfPvcAISRDIOAMRecoverTrap signifies
that the AIS/RDI F5 OAM recovery is detected
on the PVC in the last PVC TRAP notification
interval.
If the set of AIS/RDI recovered PVCs contains
successive VCIs, then the varbinds sent in this
TRAP contains information about ranges
representing these groups of PVCs. In this
case, the atmVclVpi,
catmStatusChangePVclRangeIndex,
catmPVclAISRDIUpLowerRangeValue,
catmPVclAISRDIUpHigherRangeValue,
catmPVclAISRDIRangeStatusUpStart,
catmPVclAISRDIRangeStatusUpEnd are used.
If the set of AIS/RDI recovered PVCs contains
singled out PVCs (i.e. PVC with VPI1, VCI1 is
contained in the set; but neither a PVC with VPI1
and VCI1 - 1 nor a PVC with VPI1 and VCI1 + 1 is
contained in the set of AIS/RDI recovered PVCs)
then the varbinds sent in this notification
contains information about the individual PVCs.
In this case, the atmVclVpi, atmVclVci,
catmPVclAISRDIStatusUpTransition,
catmPVclAISRDIStatusUpStart,
catmPVclAISRDIStatusUpEnd will be used.
In the case where the set of AIS/RDI recovered
PVCs contains both successive and singled out
PVCs, both sets of objects will be used."
::= { ciscoATMPVCTRAPExtnCapability 10 }
VARIATION catmIntfPvcAnyOAMRecoverTrap -- TRAP-TYPE
-- OBJECTS { ifIndex,
-- catmIntfAnyOAMRcovedPVcls,
-- catmIntfCurAnyOAMRcovingPVcls,
-- catmIntfTypeOfOAMRecover,
-- atmVclVpi,
-- atmVclVci,
-- catmPVclStatusUpTransition,
-- catmPVclStatusUpStart,
-- catmPVclStatusUpEnd,
-- catmStatusChangePVclRangeIndex,
-- catmPVclUpLowerRangeValue,
-- catmPVclUpHigherRangeValue,
-- catmPVclRangeStatusUpStart,
-- catmPVclRangeStatusUpEnd,
-- catmPVclSegCCStatusUpTransition,
-- catmPVclSegCCStatusUpStart,
-- catmPVclSegCCStatusUpEnd,
-- catmStatusChangePVclRangeIndex,
-- catmPVclSegCCUpLowerRangeValue,
-- catmPVclSegCCUpHigherRangeValue,
-- catmPVclSegCCRangeStatusUpStart,
-- catmPVclSegCCRangeStatusUpEnd,
-- catmPVclEndCCStatusUpTransition,
-- catmPVclEndCCStatusUpStart,
-- catmPVclEndCCStatusUpEnd,
-- catmStatusChangePVclRangeIndex,
-- catmPVclEndCCUpLowerRangeValue,
-- catmPVclEndCCUpHigherRangeValue,
-- catmPVclEndCCRangeStatusUpStart,
-- catmPVclEndCCRangeStatusUpEnd,
-- catmPVclAISRDIStatusUpTransition,
-- catmPVclAISRDIStatusUpStart,
-- catmPVclAISRDIStatusUpEnd,
-- catmStatusChangePVclRangeIndex,
-- catmPVclAISRDIUpLowerRangeValue,
-- catmPVclAISRDIUpHigherRangeValue,
-- catmPVclAISRDIRangeStatusUpStart,
-- catmPVclAISRDIRangeStatusUpEnd }
DESCRIPTION "A catmIntfPvcAnyOAMRecoverTrap signifies that the
one or more type of F5 OAM recovery is detected on
the PVC in the last PVC TRAP notification
interval.
The type of F5 OAM recovery can be
Loopback F5 OAM recovery,
Segment CC F5 OAM recovery,
End CC F5 OAM recovery,
AIS/RDI F5 OAM recovery.
If the set of loopback recovered PVCs contains
successive VCIs, then the varbinds sent in this
TRAP contains information about ranges
representing these groups of PVCs. In this
case, the atmVclVpi,
catmStatusChangePVclRangeIndex,
catmPVclUpLowerRangeValue,
catmPVclUpHigherRangeValue,
catmPVclRangeStatusUpStart,
catmPVclRangeStatusUpEnd are used.
If the set of loopback recovered PVCs contains
singled out PVCs (i.e. PVC with VPI1, VCI1 is
contained in the set; but neither a PVC with VPI1
and VCI1 - 1 nor a PVC with VPI1 and VCI1 + 1 is
contained in the set of loopback recovered PVCs)
then the varbinds sent in this notification
contains information about the individual PVCs.
In this case, the atmVclVpi, atmVclVci,
catmPVclStatusUpTransition,
catmPVclStatusUpStart,
catmPVclStatusUpEnd will be used.
In the case where the set of loopback recovered
PVCs contains both successive and singled out PVCs
both sets of objects will be used.
If the set of segment CC recovered PVCs contains
successive VCIs, then the varbinds sent in this
TRAP contains information about ranges
representing these groups of PVCs. In this
case, the atmVclVpi,
catmStatusChangePVclRangeIndex,
catmPVclSegCCUpLowerRangeValue,
catmPVclSegCCUpHigherRangeValue,
catmPVclSegCCRangeStatusUpStart,
catmPVclSegCCRangeStatusUpEnd are used.
If the set of segment CC recovered PVCs contains
singled out PVCs (i.e. PVC with VPI1, VCI1 is
contained in the set; but neither a PVC with VPI1
and VCI1 - 1 nor a PVC with VPI1 and VCI1 + 1 is
contained in the set of segment CC recovered PVCs)
then the varbinds sent in this notification
contains information about the individual PVCs.
In this case, the atmVclVpi, atmVclVci,
catmPVclSegCCStatusUpTransition,
catmPVclSegCCStatusUpStart,
catmPVclSegCCStatusUpEnd will be used.
In the case where the set of segment CC recovered
PVCs contains both successive and singled out
PVCs, both sets of objects will be used.
If the set of End CC recovered PVCs contains
successive VCIs, then the varbinds sent in this
TRAP contains information about ranges
representing these groups of PVCs. In this
case, the atmVclVpi,
catmStatusChangePVclRangeIndex,
catmPVclEndCCUpLowerRangeValue,
catmPVclEndCCUpHigherRangeValue,
catmPVclEndCCRangeStatusUpStart,
catmPVclEndCCRangeStatusUpEnd are used.
If the set of End CC recovered PVCs contains
singled out PVCs (i.e. PVC with VPI1, VCI1 is
contained in the set; but neither a PVC with VPI1
and VCI1 - 1 nor a PVC with VPI1 and VCI1 + 1 is
contained in the set of End CC recovered PVCs)
then the varbinds sent in this notification
contains information about the individual PVCs.
In this case, the atmVclVpi, atmVclVci,
catmPVclEndCCStatusUpTransition,
catmPVclEndCCStatusUpStart,
catmPVclEndCCStatusUpEnd will be used.
In the case where the set of End CC recovered PVCs
contains both successive and singled out PVCs,
both sets of objects will be used.
If the set of AIS/RDI recovered PVCs contains
successive VCIs, then the varbinds sent in this
TRAP contains information about ranges
representing these groups of PVCs. In this
case, the atmVclVpi,
catmStatusChangePVclRangeIndex,
catmPVclAISRDIUpLowerRangeValue,
catmPVclAISRDIUpHigherRangeValue,
catmPVclAISRDIRangeStatusUpStart,
catmPVclAISRDIRangeStatusUpEnd are used.
If the set of AIS/RDI recovered PVCs contains
singled out PVCs (i.e. PVC with VPI1, VCI1 is
contained in the set; but neither a PVC with VPI1
and VCI1 - 1 nor a PVC with VPI1 and VCI1 + 1 is
contained in the set of AIS/RDI recovered PVCs)
then the varbinds sent in this notification
contains information about the individual PVCs.
In this case, the atmVclVpi, atmVclVci,
catmPVclAISRDIStatusUpTransition,
catmPVclAISRDIStatusUpStart,
catmPVclAISRDIStatusUpEnd will be used.
In the case where the set of AIS/RDI recovered
PVCs contains both successive and singled out
PVCs, both sets of objects will be used."
::= { ciscoATMPVCTRAPExtnCapability 11 }
VARIATION catmIntfPvcUp2Trap -- TRAP-TYPE
-- OBJECTS { ifIndex,
-- catmIntfCurrentlyDownToUpPVcls,
-- atmVclVpi,
-- atmVclVci,
-- catmPVclCurRecoverTime,
-- catmPVclPrevFailTime,
-- catmPVclRecoveryReason,
-- catmStatusChangePVclRangeIndex,
-- catmUpPVclLowerRangeValue,
-- catmUpPVclHigherRangeValue,
-- catmUpPVclRangeStart,
-- catmUpPVclRangeEnd,
-- catmPrevDownPVclRangeStart,
-- catmPrevDownPVclRangeEnd,
-- catmPVclRangeRecoveryReason }
DESCRIPTION "A catmIntfPvcUp2Trap signifies that
atmVclOperStatus is detected as up on the PVC in
the last PVC TRAP notification interval.
If the set of atmVclOperStatus up PVCs contains
successive VCIs, then the varbinds sent in this
TRAP contains information about ranges
representing these groups of PVCs. In this
case, the atmVclVpi,
catmStatusChangePVclRangeIndex,
catmUpPVclLowerRangeValue,
catmUpPVclHigherRangeValue,
catmUpPVclRangeStart,
catmUpPVclRangeEnd,
catmPrevDownPVclRangeStart,
catmPrevDownPVclRangeEnd,
catmPVclRangeRecoveryReason are used.
If the set of atmVclOperStatus up PVCs contains
singled out PVCs (i.e. PVC with VPI1, VCI1 is
contained in the set; but neither a PVC with VPI1
and VCI1 - 1 nor a PVC with VPI1 and VCI1 + 1 is
contained in the set of atmVclOperStatus
UP PVCs) then the varbinds sent in this
notification contains information about the
individual PVCs. In this case, the atmVclVpi,
atmVclVci, catmPVclCurRecoverTime,
catmPVclPrevFailTime,
catmPVclRecoveryReason will be used.
In the case where the set of atmVclOperStatus
up PVCs contains both successive and singled
out PVCs, both sets of objects will be used."
::= { ciscoATMPVCTRAPExtnCapability 12 }
VARIATION catmIntfPvcDownTrap -- TRAP-TYPE
-- OBJECTS { ifIndex,
-- atmIntfPvcFailures,
-- atmIntfCurrentlyFailingPVcls,
-- atmVclVpi,
-- atmVclVci,
-- catmPVclCurFailTime,
-- catmPVclPrevRecoverTime,
-- catmPVclFailureReason,
-- catmStatusChangePVclRangeIndex,
-- catmDownPVclLowerRangeValue,
-- catmDownPVclHigherRangeValue,
-- catmDownPVclRangeStart,
-- catmDownPVclRangeEnd,
-- catmPrevUpPVclRangeStart,
-- catmPrevUpPVclRangeEnd,
-- catmPVclRangeFailureReason }
DESCRIPTION "A catmIntfPvcDownTrap signifies
atmVclOperStatus is detected as down on the PVC in
the last PVC TRAP notification interval.
If the set of atmVclOperStatus down PVCs contains
successive VCIs, then the varbinds sent in this
TRAP contains information about ranges
representing these groups of PVCs. In this
case, the atmVclVpi,
catmStatusChangePVclRangeIndex,
catmDownPVclLowerRangeValue,
catmDownPVclHigherRangeValue,
catmDownPVclRangeStart,
catmDownPVclRangeEnd,
catmPrevUpPVclRangeStart,
catmPrevUpPVclRangeEnd,
catmPVclRangeFailureReason are used.
If the set of atmVclOperStatus down PVCs contains
singled out PVCs (i.e. PVC with VPI1, VCI1 is
contained in the set; but neither a PVC with VPI1
and VCI1 - 1 nor a PVC with VPI1 and VCI1 + 1 is
contained in the set of atmVclOperStatus
down PVCs) then the varbinds sent in this
notification contains information about the
individual PVCs. In this case, the atmVclVpi,
atmVclVci, catmPVclCurFailTime,
catmPVclPrevRecoverTime,
catmPVclFailureReason will be used.
In the case where the set of atmVclOperStatus
down PVCs contains both successive and singled
out PVCs, both sets of objects will be used."
::= { ciscoATMPVCTRAPExtnCapability 13 }
END
Reference in New Issue View Git Blame Copy Permalink