mirror of
https://github.com/hsnodgrass/snmp_mib_archive.git
synced 2025-04-17 16:03:04 +00:00
1009 lines
37 KiB
Plaintext
1009 lines
37 KiB
Plaintext
-- *****************************************************************
|
|
-- CISCO-AON-STATUS-MIB.my
|
|
--
|
|
-- May 2007, AON Team
|
|
--
|
|
-- Copyright (c) 2007-2008 by cisco Systems Inc.
|
|
-- All rights reserved.
|
|
--
|
|
|
|
-- *****************************************************************
|
|
|
|
CISCO-AON-STATUS-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Counter32,
|
|
NOTIFICATION-TYPE,
|
|
Gauge32,
|
|
TimeTicks,
|
|
Unsigned32
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
NOTIFICATION-GROUP,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
TimeStamp,
|
|
DateAndTime
|
|
FROM SNMPv2-TC
|
|
InetAddress,
|
|
InetAddressType
|
|
FROM INET-ADDRESS-MIB
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
CiscoPort,
|
|
CiscoURLString
|
|
FROM CISCO-TC
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
|
|
ciscoAonStatusMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200803060000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems
|
|
Customer Service
|
|
|
|
|
|
Postal: 170 W Tasman Drive
|
|
|
|
San Jose, CA 95134
|
|
|
|
USA
|
|
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
|
|
E-mail: cs-aon@cisco.com"
|
|
DESCRIPTION
|
|
"This MIB module defines managed objects that facilitate the
|
|
management of AON node.
|
|
|
|
The information available through this MIB includes
|
|
o AON node state i.e., whether the AON node is 'unregistered',
|
|
'registered', 'active', 'inactive'.
|
|
|
|
o Node metrics information when a node is in the 'active'
|
|
state.
|
|
|
|
o The node metrics information includes the number of messages
|
|
received by the node, number of PEPs deployed and number of
|
|
messages received by a PEP as well as information about the end
|
|
points that the messages are delivered to. The metrics are
|
|
reset when the AON data plane is restarted.
|
|
|
|
The following terms are used throughout this MIB:
|
|
|
|
AON : Application Oriented Networking.
|
|
|
|
_____________
|
|
| AON |
|
|
| Management |
|
|
| Console |
|
|
|____________|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
____ |____________________________
|
|
| | AON Node |
|
|
| __V_________ _________ |
|
|
| | | | | |
|
|
| | AON | | AON | |
|
|
| | Management|---->| Data | |
|
|
| | Agent | | Plane | |
|
|
| |___________ |________| |
|
|
| |
|
|
|_________________________________|
|
|
Figure 1 : AON
|
|
|
|
AON data plane: This is the piece of software that runs on the
|
|
AON node and is responsible for processing application message
|
|
traffic.
|
|
|
|
AMC : AON Management Console. A Web-based application used to
|
|
manage the AON installation, upgrade, and operation. This is
|
|
also referred to as the AON Management Plane.
|
|
|
|
AMA : AON Management Agent. An agent that runs on the AON node
|
|
and acts as intermediary between the AON data plane and the
|
|
AMC.
|
|
|
|
AON Node : An AON node is either a single device (blade or
|
|
appliance) or a virtual cluster of devices (blades or
|
|
appliances) that are running the AON software.
|
|
|
|
AON Cloud : A group of AON nodes that are connected together
|
|
via NextHop configuration is referred to as an AON cloud.
|
|
|
|
_____________ _____________
|
|
| Source | | Destination |
|
|
| End point | | End point |
|
|
| Application | | Application |
|
|
| ____________| |_____________|
|
|
_____|________________________________^_____
|
|
( | AON Cloud | )
|
|
( __V______ ________ ____|___ )
|
|
( | | | | | | )
|
|
( | AON | | AON | | AON | )
|
|
( | Entry | | Inter- | | Exit | )
|
|
( | Node | | mediate| | Node | )
|
|
( | |---->| Node |---->| | )
|
|
( | | | | | | )
|
|
( | | | | | | )
|
|
( |_______ | |_______ | |________| )
|
|
( )
|
|
( )
|
|
(___________________________________________ )
|
|
Figure 2: AON Cloud
|
|
|
|
Entry Node : The first node in an AON cloud, generally the one
|
|
closest to the client, is known as the Entry Node. This node
|
|
is also sometimes referred to as the Client Proxy.
|
|
|
|
Exit Node : The ultimate node in an AON cloud, generally the
|
|
one closest to the server, is known as the Exit Node. This
|
|
node is also sometimes referred to as the Server Proxy.
|
|
|
|
Intermediate Node : Any AON node in an AON cloud that is
|
|
neither directly communicating with the client or the server
|
|
(i.e. neither an Entry Node nor an Exit Node) is known as an
|
|
Intermediate Node.
|
|
|
|
PEP : Policy Execution Plan. A PEP is a sequence of bladelets
|
|
that determine how a message is processed in AON.
|
|
|
|
MEP : Message Exchange Pattern. MEP describes the pattern of
|
|
messages required by a communications protocol to establish or
|
|
use a communication channel. There are two major message
|
|
exchange patterns: a request response pattern, and a one way
|
|
pattern.
|
|
|
|
Bladelet : A bladelet is a piece of software that performs a
|
|
specific message handling function. Bladelets are combined
|
|
together into PEPs.
|
|
|
|
Send Bladelet : Routing bladelet that sends a message to a
|
|
selected destination.
|
|
|
|
Notify Bladelet : Bladelet for generating a custom
|
|
notification (either as SNMP trap or email) based on user
|
|
specified condition.
|
|
|
|
NamedException : A NamedException is exposed by a bladelet as
|
|
connection points to identify a recoverable exception. The
|
|
action to handle a NamedException thrown by a bladelet can be
|
|
explicitly designed in the PEP by associating a execution path
|
|
which comprises of a series of bladelet.
|
|
|
|
Exception Block : It is the block in the PEP that is marked by
|
|
the exception marker and which is executed in case of a
|
|
bladelet exception that is not a NamedException that has an
|
|
output path associated with it.
|
|
|
|
URI : Uniform Resource Identifier. A URI (Uniform Resource
|
|
Identifier) is the way you identify any content in the Internet
|
|
space, whether it be a page of text, a video or sound clip, a
|
|
still or animated image, or a program.
|
|
The most common form of URI is the Web page address, which is a
|
|
particular form or subset of URI called a Uniform Resource
|
|
Locator (URL). A URI typically describes:
|
|
* mechanism used to access the resource
|
|
* specific computer that the resource is housed in
|
|
* specific name of the resource (a file name) on the computer.
|
|
|
|
URL : Uniform Resource Locator. A URL (Uniform Resource
|
|
Locator) is the unique Internet address for a file. The URL
|
|
contains the name of the protocol to be used to access the file
|
|
resource, a domain name that identifies a specific computer on
|
|
the Internet, and a pathname, a hierarchical description that
|
|
specifies the location of a file in that computer.
|
|
|
|
End point: An end point is an application that is either a
|
|
sender (client) or a receiver (server) of messages that
|
|
communicates with AON."
|
|
REVISION "200803060000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { ciscoMgmt 646 }
|
|
|
|
|
|
ciscoAonStatusMIBNotifs OBJECT IDENTIFIER
|
|
::= { ciscoAonStatusMIB 0 }
|
|
|
|
ciscoAonStatusMIBObjects OBJECT IDENTIFIER
|
|
::= { ciscoAonStatusMIB 1 }
|
|
|
|
ciscoAonStatusMIBConform OBJECT IDENTIFIER
|
|
::= { ciscoAonStatusMIB 2 }
|
|
|
|
-- Conformance
|
|
|
|
ciscoAonStatusMIBCompliances OBJECT IDENTIFIER
|
|
::= { ciscoAonStatusMIBConform 1 }
|
|
|
|
caonSystemInfo OBJECT IDENTIFIER
|
|
::= { ciscoAonStatusMIBObjects 1 }
|
|
|
|
caonNotificationInfo OBJECT IDENTIFIER
|
|
::= { ciscoAonStatusMIBObjects 2 }
|
|
|
|
|
|
caonNodeState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unregistered(1),
|
|
registered(2),
|
|
active(3),
|
|
inactive(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the node state.
|
|
|
|
'unregistered': Node is not yet registered with AMC.
|
|
'registered' : Node has registered with AMC but is not yet
|
|
activated.
|
|
'active' : Node has been activated from AMC and is ready
|
|
to process messages.
|
|
'inactive' : Node has been activated from AMC but AON
|
|
process is down."
|
|
::= { caonSystemInfo 1 }
|
|
|
|
caonBootTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the value of sysUpTime when the AON
|
|
data plane was bootstrapped successfully."
|
|
::= { caonSystemInfo 2 }
|
|
|
|
caonLastActivateTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the local time at the node when the node
|
|
was last activated from AMC."
|
|
::= { caonSystemInfo 3 }
|
|
|
|
caonReceivedMessages OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "messages"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the aggregate count of messages received
|
|
by the node. This includes all the messages for which a PEP
|
|
was executed as well as the messages that were pass-through and
|
|
did not involve any PEP invocation.
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other times
|
|
as indicated by the value of caonCounterDiscontinuityTime
|
|
object."
|
|
::= { caonSystemInfo 4 }
|
|
|
|
caonAmcIpAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of IP address by which the
|
|
AMC for the node is reachable."
|
|
::= { caonSystemInfo 5 }
|
|
|
|
caonAmcIpAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the IP Address of the AMC managing this
|
|
node. The type of this address is determined by the value of
|
|
caonAmcIpAddressType object"
|
|
::= { caonSystemInfo 6 }
|
|
|
|
caonPepCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "PEPs"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the total number of PEPs that are
|
|
deployed on the node."
|
|
::= { caonSystemInfo 7 }
|
|
|
|
caonPepTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CaonPepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table lists descriptive and status information about the
|
|
PEPs contained by this AON node."
|
|
::= { caonSystemInfo 8 }
|
|
|
|
caonPepEntry OBJECT-TYPE
|
|
SYNTAX CaonPepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry in caonPepTable containing information about a
|
|
single PEP.
|
|
When AON data plane bootstraps, an entry is
|
|
created for each PEP that has been deployed on the AON node.
|
|
When PEPs are deployed from AMC to AON node after AON data
|
|
plane bootstraps, an entry for each PEP is added to the
|
|
table. An entry is deleted from the table when the PEP is
|
|
deleted from AMC."
|
|
INDEX { caonPepIndex }
|
|
::= { caonPepTable 1 }
|
|
|
|
CaonPepEntry ::= SEQUENCE {
|
|
caonPepIndex Unsigned32,
|
|
caonPepName SnmpAdminString,
|
|
caonPepStyle INTEGER ,
|
|
caonPepReceivedMessages Counter32,
|
|
caonPepFailures Counter32,
|
|
caonPepSecurityFailures Counter32
|
|
}
|
|
|
|
caonPepIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295 )
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates an arbitary integer value that uniquely
|
|
identifies a PEP."
|
|
::= { caonPepEntry 1 }
|
|
|
|
caonPepName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the name of the PEP."
|
|
::= { caonPepEntry 2 }
|
|
|
|
caonPepStyle OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
oneWay(1),
|
|
requestResponse(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the PEP interaction style commonly known
|
|
as the MEP. The possible values are:
|
|
|
|
'oneWay' : Response is not expected from the receiving
|
|
end point. AON does not wait for response
|
|
message in this case.
|
|
'requestResponse' : Response is expected from the receiving end
|
|
point. AON waits for the response from the
|
|
receiving end point.
|
|
|
|
However, the PEP interaction style can be overridden by the
|
|
Send Bladelet interaction style. If the user specifies the
|
|
interaction style to be 'oneWay' in the Send bladelet, it
|
|
overrides the PEP level interaction style and AON does not
|
|
wait for a response from the receiving end point."
|
|
::= { caonPepEntry 3 }
|
|
|
|
caonPepReceivedMessages OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the total number of messages that were
|
|
received and for which this PEP was executed.
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other times
|
|
as indicated by the value of caonCounterDiscontinuityTime
|
|
object."
|
|
::= { caonPepEntry 4 }
|
|
|
|
caonPepFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of times the PEP execution
|
|
failed and PEP was forced to execute the exception path. This
|
|
count is incremented whether an exception path is present or
|
|
not.
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other times
|
|
as indicated by the value of caonCounterDiscontinuityTime
|
|
object."
|
|
::= { caonPepEntry 5 }
|
|
|
|
caonPepSecurityFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of times authentication
|
|
and certificate validation failures were encountered during
|
|
PEP execution.
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other times
|
|
as indicated by the value of caonCounterDiscontinuityTime
|
|
object."
|
|
::= { caonPepEntry 6 }
|
|
|
|
|
|
|
|
caonPepEndPointTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CaonPepEndPointEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table lists the end points that the messages were
|
|
delivered to during PEP execution."
|
|
::= { caonSystemInfo 10 }
|
|
|
|
caonPepEndPointEntry OBJECT-TYPE
|
|
SYNTAX CaonPepEndPointEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains information about an end point that the
|
|
messages were delivered to during PEP execution.
|
|
An entry is added to the table when a message is delivered
|
|
to the end point for the first time during PEP execution. An
|
|
entry is deleted from this table if the corresponding PEP is
|
|
deleted from AMC."
|
|
INDEX {
|
|
caonPepIndex,
|
|
caonPepEndPointIndex
|
|
}
|
|
::= { caonPepEndPointTable 1 }
|
|
|
|
CaonPepEndPointEntry ::= SEQUENCE {
|
|
caonPepEndPointIndex Unsigned32,
|
|
caonPepEndPointUrl CiscoURLString,
|
|
caonEndPointAttemptedMessages Counter32,
|
|
caonOneWayDeliveredMessages Counter32,
|
|
caonOneWayFailedMessages Counter32,
|
|
caonReqResponseDeliveredMessages Counter32,
|
|
caonReqResponseFailedMessages Counter32,
|
|
caonEndPointMinResponseTime TimeTicks,
|
|
caonEndPointMaxResponseTime TimeTicks,
|
|
caonEndPointAvgResponseTime TimeTicks
|
|
}
|
|
|
|
caonPepEndPointIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295 )
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates an arbitary integer-value that uniquely
|
|
identifies the PEP end point."
|
|
::= { caonPepEndPointEntry 1 }
|
|
|
|
caonPepEndPointUrl OBJECT-TYPE
|
|
SYNTAX CiscoURLString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the URL of the end point. This URL does
|
|
not include the query parameters."
|
|
::= { caonPepEndPointEntry 2 }
|
|
|
|
caonEndPointAttemptedMessages OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of message delivery attempts
|
|
to the end point. For example, if a message was delivered
|
|
successfully on the initial try this counter will be
|
|
incremented by 1; however, if that message was not successfully
|
|
delivered on the initial try and 3 retry attempts were made,
|
|
then the counter will be incremented by 4.
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other times
|
|
as indicated by the value of caonCounterDiscontinuityTime
|
|
object."
|
|
::= { caonPepEndPointEntry 3 }
|
|
|
|
caonOneWayDeliveredMessages OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of one-way messages
|
|
successfully delivered to the end point. This count includes
|
|
only those messages that do not require a response from the end
|
|
point. However in case the AON node is not the exit node but
|
|
rather an entry or intermediate node hop in the AON cloud then
|
|
this counter represents successful delivery to the next
|
|
hop.
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other times
|
|
as indicated by the value of caonCounterDiscontinuityTime
|
|
object."
|
|
::= { caonPepEndPointEntry 4 }
|
|
|
|
caonOneWayFailedMessages OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of one-way messages that
|
|
failed delivery to the end point. This count includes only
|
|
those messages that do not require a response from the
|
|
end point. However in case the AON node is not the exit node
|
|
but rather an entry or intermediate node hop in the AON cloud
|
|
then this counter represents failed delivery to the next hop.
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other times
|
|
as indicated by the value of caonCounterDiscontinuityTime
|
|
object."
|
|
::= { caonPepEndPointEntry 5 }
|
|
|
|
caonReqResponseDeliveredMessages OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "messages"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of response required messages
|
|
successfully delivered to the end point. The count includes
|
|
only those messages for which a response was received
|
|
successfully from the end point.
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other times
|
|
as indicated by the value of caonCounterDiscontinuityTime
|
|
object."
|
|
::= { caonPepEndPointEntry 6 }
|
|
|
|
caonReqResponseFailedMessages OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "messages"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of response required messages
|
|
that failed delivery to the end point. This count includes only
|
|
those messages for which a response message was expected from
|
|
the end point.
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other times
|
|
as indicated by the value of caonCounterDiscontinuityTime
|
|
object."
|
|
::= { caonPepEndPointEntry 7 }
|
|
|
|
caonEndPointMinResponseTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the minimum response time experienced by
|
|
the PEP to receive a response from the end point."
|
|
::= { caonPepEndPointEntry 8 }
|
|
|
|
caonEndPointMaxResponseTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the maximum response time experienced by
|
|
the PEP to receive a response from the end point."
|
|
::= { caonPepEndPointEntry 9 }
|
|
|
|
caonEndPointAvgResponseTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the average response time experienced by
|
|
the PEP to receive a response from the end point."
|
|
::= { caonPepEndPointEntry 10 }
|
|
|
|
|
|
|
|
caonCounterDiscontinuityTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the most recent occasion at which one
|
|
or more of the counters suffered a discontinuity. The relevant
|
|
counters are the specific instances associated with any
|
|
Counter32 or Counter64 object in the MIB. If no such
|
|
discontinuities have occured since the last initialization of
|
|
the local management subsystem, then this object contains a
|
|
zero value."
|
|
::= { caonSystemInfo 11 }
|
|
|
|
-- Notification only objects
|
|
|
|
caonMessageSrcUri OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..255))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the message source URI."
|
|
::= { caonNotificationInfo 1 }
|
|
|
|
caonMessageSrcIpAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of IP address of the
|
|
message source."
|
|
::= { caonNotificationInfo 2 }
|
|
|
|
caonMessageSrcIpAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the message source IP Address. The type
|
|
of this address is determined by the value of
|
|
caonMessageSrcIpAddressType."
|
|
::= { caonNotificationInfo 3 }
|
|
|
|
caonMessageSrcPort OBJECT-TYPE
|
|
SYNTAX CiscoPort
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the message source port number."
|
|
::= { caonNotificationInfo 4 }
|
|
|
|
caonNotificationName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..64))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the name of the custom notification
|
|
type. This notification type is defined by the customer to
|
|
identify the custom notification."
|
|
::= { caonNotificationInfo 5 }
|
|
|
|
caonNotificationText OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..255))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates additional information regarding the
|
|
custom notification. This notification text is defined by the
|
|
customer to provide details related to the custom notification."
|
|
::= { caonNotificationInfo 6 }
|
|
|
|
caonSendResponseThreshold OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the end point response time threshold
|
|
that is configured in the Send bladelet. If the time to receive
|
|
a response from the end point exceeds this threshold, then a
|
|
caonSendResponseThresholdExceeded notification may be
|
|
generated."
|
|
::= { caonNotificationInfo 7 }
|
|
|
|
caonNotifEnableIndicators OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
caonUpNotifEnabled(0),
|
|
caonDownNotifEnabled(1),
|
|
caonNewPepDeployedNotifEnabled(2),
|
|
caonMessageDeliveryFailedNotifEnabled(3),
|
|
caonSendResponseThresholdExceededNotifEnabled(4),
|
|
caonCustomNotifEnabled(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the SNMP notifications will or
|
|
will not be sent.
|
|
|
|
If the 'caonUpNotifEnabled' bit is set, then caonUp
|
|
notification will be sent when AON data plane bootstraps
|
|
successfully. If the 'caonUpNotifEnabled' bit is not set,
|
|
caonUp notification will not be sent.
|
|
|
|
If the 'caonDownNotifEnabled' bit is set, then caonDown
|
|
notification will be sent when the AON data plane goes down.
|
|
If the 'caonDownNotifEnabled' bit is not set, caonDown
|
|
notification will not be sent.
|
|
|
|
If the 'caonNewPepDeployedNotifEnabled' bit is set, then
|
|
caonNewPepDeployed notification will be sent when a new PEP is
|
|
deployed successfully after AON bootstrap. If the
|
|
'caonNewPepDeployedNotifEnabled' bit is not set,
|
|
caonNewPepDeployed notification will not be sent.
|
|
|
|
If the 'caonMessageDeliveryFailedNotifEnabled' bit is set, then
|
|
caonMessageDeliveryFailed notification will be sent when a
|
|
message cannot be delivered to the end point. If the
|
|
'caonMessageDeliveryFailedNotifEnabled' bit is not set,
|
|
caonMessageDeliveredFailed notification will not be sent.
|
|
|
|
If the 'caonSendResponseThresholdExceededNotifEnabled' bit is
|
|
set, then caonSendResponseThresholdExceeded notification will
|
|
be sent when the end point response time exceeds the threshold
|
|
value specified in Send Bladelet. If the bit
|
|
'caonSendResponseThresholdExceededNotifEnabled' is not set,
|
|
caonSendResponseThresholdExceeded notification will not be
|
|
sent.
|
|
|
|
If the 'caonCustomNotifEnabled' bit is set,
|
|
caonCustomNotification will be sent. If the
|
|
'caonCustomNotifEnabled' bit is not set,
|
|
caonCustomNotification will not be sent."
|
|
::= { caonNotificationInfo 8 }
|
|
|
|
-- Notification Types
|
|
|
|
caonUp NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"caonUp notification is sent when AON data plane is
|
|
bootstrapped successfully and AON is ready to process messages."
|
|
::= { ciscoAonStatusMIBNotifs 1 }
|
|
|
|
caonDown NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"caonDown notification is sent when AON data plane goes down.
|
|
AON data plane might be down as a result of an administrative
|
|
command i.e. stopping AON via CLI command or deactivating the
|
|
node from AMC or due to abnormal termination of AON data plane.
|
|
If there is a hardware failure on the AON box then the
|
|
notification might not be triggered."
|
|
::= { ciscoAonStatusMIBNotifs 2 }
|
|
|
|
caonNewPepDeployed NOTIFICATION-TYPE
|
|
OBJECTS { caonPepName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is sent if a new PEP is deployed after AON
|
|
has bootstrapped successfully.
|
|
caonPepName identifies the name of the new PEP."
|
|
::= { ciscoAonStatusMIBNotifs 3 }
|
|
|
|
caonMessageDeliveryFailed NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
caonPepEndPointUrl,
|
|
caonMessageSrcUri,
|
|
caonMessageSrcIpAddressType,
|
|
caonMessageSrcIpAddress,
|
|
caonMessageSrcPort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is sent if a message cannot be delivered to
|
|
the end point.
|
|
caonMessageEndPointURL identifies the end point to which the
|
|
message was being delivered to.
|
|
The message source is either identified by caonMessageSrcUri
|
|
or (caonMessageSrcIpAddr and caonMessageSrcPort)."
|
|
::= { ciscoAonStatusMIBNotifs 4 }
|
|
|
|
caonSendResponseThresholdExceeded NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
caonPepEndPointUrl,
|
|
caonSendResponseThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is sent if the destination end point
|
|
response time exceeds the threshold value specified in the
|
|
Send Bladelet.
|
|
caonPepEndPointUrl identifies the URI of the end point the
|
|
message was being delivered to.
|
|
caonSendResponseThreshold identifies the end point response time
|
|
threshold value configured in the Send bladelet."
|
|
::= { ciscoAonStatusMIBNotifs 5 }
|
|
|
|
caonCustomNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
caonNotificationName,
|
|
caonNotificationText
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification could be triggered during PEP execution.
|
|
Currently this is triggered from the Notify Bladelet if
|
|
the customer specified condition evaluates to true and the
|
|
notification type selected is SNMP. This provides a way to
|
|
extend the AON platform to generate customer defined
|
|
notifications based on customer specified conditions.
|
|
caonNotificationName identifies the name of the customer
|
|
defined notification type.
|
|
caonNotificationText identifies the notification text for the
|
|
custom notification."
|
|
::= { ciscoAonStatusMIBNotifs 6 }
|
|
ciscoAonStatusMIBGroups OBJECT IDENTIFIER
|
|
::= { ciscoAonStatusMIBConform 2 }
|
|
|
|
|
|
ciscoAonStatusMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the Cisco
|
|
AON Status MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
caonNodeObjectGroup,
|
|
caonPepObjectGroup,
|
|
caonPepEndPointObjectGroup,
|
|
caonUpNotificationGroup,
|
|
caonDownNotificationGroup,
|
|
caonNewPepDeployedNotifGroup,
|
|
caonSendThresholdExceededNotifGroup,
|
|
caonMessageDeliveryFailedNotifGroup,
|
|
caonCustomNotifGroup,
|
|
caonNotificationObjectGroup,
|
|
caonCustomNotifObjectsGroup,
|
|
caonMessageDeliveryFailedNotifObjectsGroup,
|
|
caonSendThresholdExceededNotifObjectsGroup
|
|
}
|
|
|
|
GROUP caonNotifEnableObjectsGroup
|
|
DESCRIPTION
|
|
"This group is optional."
|
|
::= { ciscoAonStatusMIBCompliances 1 }
|
|
|
|
-- Units of Conformance
|
|
|
|
caonNodeObjectGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
caonNodeState,
|
|
caonBootTime,
|
|
caonLastActivateTime,
|
|
caonReceivedMessages,
|
|
caonAmcIpAddressType,
|
|
caonAmcIpAddress,
|
|
caonPepCount,
|
|
caonCounterDiscontinuityTime
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the AON node information."
|
|
::= { ciscoAonStatusMIBGroups 1 }
|
|
|
|
caonPepObjectGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
caonPepName,
|
|
caonPepStyle,
|
|
caonPepReceivedMessages,
|
|
caonPepFailures,
|
|
caonPepSecurityFailures
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information about a PEP."
|
|
::= { ciscoAonStatusMIBGroups 2 }
|
|
|
|
caonPepEndPointObjectGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
caonPepEndPointUrl,
|
|
caonEndPointAttemptedMessages,
|
|
caonOneWayDeliveredMessages,
|
|
caonOneWayFailedMessages,
|
|
caonReqResponseDeliveredMessages,
|
|
caonReqResponseFailedMessages,
|
|
caonEndPointMinResponseTime,
|
|
caonEndPointMaxResponseTime,
|
|
caonEndPointAvgResponseTime
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information about a PEP end
|
|
point."
|
|
::= { ciscoAonStatusMIBGroups 3 }
|
|
|
|
caonNotificationObjectGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
caonMessageSrcIpAddressType,
|
|
caonMessageSrcIpAddress,
|
|
caonMessageSrcPort,
|
|
caonNotificationName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conformance group for objects contained in the notifications."
|
|
::= { ciscoAonStatusMIBGroups 4 }
|
|
|
|
caonUpNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { caonUp }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of notification for signaling that AON data plane
|
|
is ready to process messages."
|
|
::= { ciscoAonStatusMIBGroups 5 }
|
|
|
|
caonDownNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { caonDown }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of notification for signaling that AON data plane
|
|
is down."
|
|
::= { ciscoAonStatusMIBGroups 6 }
|
|
|
|
caonNewPepDeployedNotifGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { caonNewPepDeployed }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of notification for signaling that a new PEP has
|
|
been deployed to the AON node."
|
|
::= { ciscoAonStatusMIBGroups 7 }
|
|
|
|
caonSendThresholdExceededNotifGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { caonSendResponseThresholdExceeded }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of notification for signaling that a destination
|
|
end point response time exceeded the threshold value specified
|
|
in the Send Bladelet."
|
|
::= { ciscoAonStatusMIBGroups 8 }
|
|
|
|
caonMessageDeliveryFailedNotifGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { caonMessageDeliveryFailed }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of notification for signaling that a message
|
|
could not be delivered to the end point."
|
|
::= { ciscoAonStatusMIBGroups 9 }
|
|
|
|
caonCustomNotifGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { caonCustomNotification }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of notification for signaling that a custom
|
|
notification has been triggered from Notification bladelet
|
|
during PEP execution."
|
|
::= { ciscoAonStatusMIBGroups 10 }
|
|
|
|
caonCustomNotifObjectsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
caonNotificationName,
|
|
caonNotificationText
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information about
|
|
caonCustomNotification."
|
|
::= { ciscoAonStatusMIBGroups 11 }
|
|
|
|
caonMessageDeliveryFailedNotifObjectsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
caonMessageSrcUri,
|
|
caonMessageSrcIpAddressType,
|
|
caonMessageSrcIpAddress,
|
|
caonMessageSrcPort
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information about
|
|
caonMessageDeliveryFailed notification"
|
|
::= { ciscoAonStatusMIBGroups 12 }
|
|
|
|
caonNotifEnableObjectsGroup OBJECT-GROUP
|
|
OBJECTS { caonNotifEnableIndicators }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for enabling or disabling SNMP
|
|
notifications."
|
|
::= { ciscoAonStatusMIBGroups 13 }
|
|
|
|
caonSendThresholdExceededNotifObjectsGroup OBJECT-GROUP
|
|
OBJECTS { caonSendResponseThreshold }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information about
|
|
caonSendResponseThresholdExceeded notification"
|
|
::= { ciscoAonStatusMIBGroups 14 }
|
|
|
|
END
|
|
|
|
|