MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 16:32:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/QOS-POLICY-IP-PIB.mib
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

2304 lines
79 KiB
Plaintext
Raw Blame History

QOS-POLICY-IP-PIB DEFINITIONS ::= BEGIN
IMPORTS
Unsigned32, IpAddress, Integer32,
MODULE-IDENTITY, OBJECT-TYPE
FROM SNMPv2-SMI
TruthValue, TEXTUAL-CONVENTION,
RowStatus, StorageType
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
RoleCombination, PolicyInstanceId
FROM POLICY-FRAMEWORK-PIB
policy
FROM SYNOPTICS-ROOT-MIB;
qosPolicyIpPib MODULE-IDENTITY
LAST-UPDATED "200407200000Z"
ORGANIZATION "IETF RAP WG - Nortel Networks, Inc."
CONTACT-INFO "
Michael Fine
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706 USA
Phone: +1 408 527 8218
Email: mfine@cisco.com
Keith McCloghrie
Cisco Systems, Inc.
170 West Tasman Drive,
San Jose, CA 95134-1706 USA
Phone: +1 408 526 5260
Email: kzm@cisco.com
John Seligson
Nortel Networks, Inc.
4401 Great America Parkway
Santa Clara, CA 95054 USA
Phone: +1 408 495 2992
Email: jseligso@nortelnetworks.com"
DESCRIPTION
"The PIB module containing an initial set of policy
rule classes that describe the quality of service
(QoS) policies. It includes general classes that may
be extended by other PIB specifications as well as
an initial set of PIB classes related to IP processing."
REVISION "200407200000Z" -- 20 July 2004
DESCRIPTION "Version 3: Added version info"
::= { policy 2 }
qosPolicyGenPibClasses OBJECT IDENTIFIER ::= { qosPolicyIpPib 1 }
qosPolicyIpPibClasses OBJECT IDENTIFIER ::= { qosPolicyIpPib 2 }
--
-- Textual Conventions
--
--
-- DiffServ Codepoint
--
Dscp ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer that is in the range of the DiffServ codepoint
values."
SYNTAX Integer32 (0..63)
--
-- Policy Instance Index Or No Value Specified
--
PolicyInstanceIdOrZero ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The textual convention for use by an attribute which is used
as the instance-identifying index of a PRC, i.e., an attribute
named in an INDEX clause. The value of an attribute with this
syntax is always greater than zero when it identifies a PRC.
A value of zero indicates that no associated PRC is identified."
SYNTAX Unsigned32 (0..4294967295)
--
-- Interface types
--
QosInterfaceQueueCount ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer that describes the number of queues an interface
supports. It is limited to the number of DSCP values."
SYNTAX INTEGER (1..64)
--
-- QoS Interface Group
--
--
-- This group specifies the configuration of the various interface
-- types including the setting of queueing parameters and the
-- mapping of DSCPs and 802.1 CoS to queues.
--
qosIfParameters OBJECT IDENTIFIER ::= { qosPolicyGenPibClasses 1 }
--
-- Interface Type Table
--
qosInterfaceTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosInterfaceTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface type definitions. This class describes the types
of interfaces that exist on the device. An interface type
is denoted by its designated role identifier as well as
by the queue set and queue capabilities it supports."
::= { qosIfParameters 1 }
qosInterfaceTypeEntry OBJECT-TYPE
SYNTAX QosInterfaceTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of this class describes the characteristics
of a type of an interface. Interface type characteristics
include a role combination identifier, a queue set
identifier and a queue capabilities attribute. An
instance is required for each different unique role
combination identifier which represents the different
interface types that are operational in the device at
any given time. The PEP does not report which specific
interfaces have which characteristics."
INDEX { qosInterfaceTypeId }
::= { qosInterfaceTypeTable 1 }
QosInterfaceTypeEntry ::= SEQUENCE {
qosInterfaceTypeId PolicyInstanceId,
qosInterfaceTypeRoles RoleCombination,
qosInterfaceTypeQueueSet PolicyInstanceId,
qosInterfaceTypeCapabilities BITS,
qosInterfaceTypeStorageType StorageType,
qosInterfaceTypeStatus RowStatus
}
qosInterfaceTypeId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer index that uniquely identifies a
instance of the qosInterfaceType class. Class instances
may not be contiguous."
::= { qosInterfaceTypeEntry 1 }
qosInterfaceTypeRoles OBJECT-TYPE
SYNTAX RoleCombination
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The role combination that is used to identify interfaces
with the characteristics specified by the attributes
of this class instance. Interface role combination
identifiers are used within a number of classes to
logically identify a physical set of interfaces to which
policy rules and actions are applied. Role combination
identifiers must exist in this table prior to being
referenced in other class instances."
::= { qosInterfaceTypeEntry 2 }
qosInterfaceTypeQueueSet OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the queue set that is associated with
interfaces that are identified with the role combination
identifier that is associated with this class instance."
::= { qosInterfaceTypeEntry 3 }
qosInterfaceTypeCapabilities OBJECT-TYPE
SYNTAX BITS {
other(0),
-- Classification support
inputIpClassification(1),
outputIpClassification(2),
input802Classification(3),
output802Classification(4),
-- Queuing discipline support
singleQueuingDiscipline(5),
hybridQueuingDiscipline(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An enumeration of interface capabilities. Used by the
PDP or network manager to select which policies and
configuration it should push to the PEP."
::= { qosInterfaceTypeEntry 4 }
qosInterfaceTypeStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
qosInterfaceTypeStatus object is equal to active(1)."
DEFVAL { volatile }
::= { qosInterfaceTypeEntry 5 }
qosInterfaceTypeStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported."
::= { qosInterfaceTypeEntry 6 }
--
-- Interface Queue Table
--
-- The Interface Queue Table enumerates the individual queues that
-- comprise a given queue set. Information specific to each queue
-- is exported by this table.
--
qosIfQueueTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosIfQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains information about the individual queues that
comprise a queue set implemented on the device."
::= { qosIfParameters 2 }
qosIfQueueEntry OBJECT-TYPE
SYNTAX QosIfQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the qosIfQueueTable.
Each row identifies a specific queue within a given queue
set and contains detailed information about the queue. Queues
are associated with a given set through this table and
a queue set is associated with an interface set through
the qosInterfaceTypeTable."
INDEX { qosIfQueueId }
::= { qosIfQueueTable 1 }
QosIfQueueEntry ::= SEQUENCE {
qosIfQueueId PolicyInstanceId,
qosIfQueueSetId INTEGER,
qosIfQueueIndex QosInterfaceQueueCount,
qosIfQueueGenDiscipline INTEGER,
qosIfQueueExtDiscipline OBJECT IDENTIFIER,
qosIfQueueDrainSize Unsigned32,
qosIfQueueAbsBandwidth Unsigned32,
qosIfQueueBandwidthAllocation INTEGER,
qosIfQueueServiceOrder QosInterfaceQueueCount,
qosIfQueueSize Integer32,
qosIfQueueStorageType StorageType,
qosIfQueueStatus RowStatus
}
qosIfQueueId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely identifies this row in the table,
i.e., this PRI."
::= { qosIfQueueEntry 1 }
qosIfQueueSetId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An index that uniquely identifies a specific queue set. The
queue set that is identified with this value is associated
with an interface set through the qosInterfaceTypeQueueSet
object in the qosInterfaceTypeTable. The individual queues
that are members of this set all have the same value for
this attribute (i.e., they have the same set ID)."
::= { qosIfQueueEntry 2 }
qosIfQueueIndex OBJECT-TYPE
SYNTAX QosInterfaceQueueCount
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An arbitrary index that uniquely identifies a specific
queue within a set of queues that is identified by the
qosIfQueueSetId value."
::= { qosIfQueueEntry 3 }
qosIfQueueGenDiscipline OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- Use qosIfQueueExtDiscipline
fifo(2), -- First In First Out queuing
pq(3), -- Priority Queuing
fq(4), -- Fair Queuing
wfq(5) -- Weighted Fair Queuing
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the queuing discipline that is
associated with the specified queue. Several general
purpose and well-known queuing disciplines are supported
by this attribute. Queuing disciplines that differ from
those that are supported by this object are specified
by setting this attribute to other(1) and providing
the object identifier that represents the different
queuing paradigm in the qosIfQueueExtDiscipline object.
A value of fifo(2) indicates that the queue is serviced
on a first-in-first-out (FIFO) basis. This discipline is
generally employed when only a single queue is available
for a given interface.
A value of pq(3) indicates that the queue is serviced
using a priority queuing discipline. This technique is
used when several queues are available for a given
interface. Each queue is assigned a priority and queues
are serviced in order of priority. Higher priority queues
are completely drained before lower priority queues are
serviced.
A value of fq(4) indicates that the queue is serviced
using a fair queuing discipline. This technique is used
when several queues are available for a given interface.
Each queue is treated equally and is serviced in a
round-robin fashion.
A value of wfq(5) indicates that the queue is serviced
using a weighted fair queuing discipline. This technique is
used when several queues are available for a given interface.
Each queue is serviced based on queue weights which determine
the scheduling and frequency of queue servicing. Queues that
are assigned a greater weight are implicitly provided with
more bandwidth.
Note that the processing disciplines for all of the queues
in a given set must be considered when trying to establish
a processing profile for a given interface."
::= { qosIfQueueEntry 4 }
qosIfQueueExtDiscipline OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the queuing discipline that is
associated with the specified queue. This attribute
provides a means through which additional queuing mechanisms
can be identified should the general queuing disciplines
be inadequate for a given device. As such. this attribute is
consulted only when the value of the qosIfQueueGenDiscipline
object is other(1). It contains an object identifier that
uniquely identifies a queuing paradigm.
Note that the processing disciplines for all of the queues
in a given set must be considered when trying to establish
a processing profile for a given interface."
::= { qosIfQueueEntry 5 }
qosIfQueueDrainSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of bytes that may be drained from the
queue in one cycle. The percentage of the interface
bandwidth allocated to this queue can be calculated from
this attribute and the sum of the drain sizes of all the
queues in a specific queue cluster in a queue set.
This attribute represents the relative bandwidth that is
available to a given queue with respect to other queues with
which it is associated. The absolute bandwidth that is
available to a given queue is specified by the attribute
qosIfQueueAbsBandwidth. Which of these two applies is
specified by the attribute qosIfQueueBandwidthAllocation."
::= { qosIfQueueEntry 6 }
qosIfQueueAbsBandwidth OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum interface bandwidth that is available for
consumption when servicing this queue. This bandwidth is
specified in terms of kilobits per second.
This attribute represents the absolute bandwidth that is
available to a given queue. The relative bandwidth that is
available to a given queue, with respect to other queues with
which it is associated, is specified by the attribute
qosIfQueueDrainSize. Which of these two applies is specified
by the attribute qosIfQueueBandwidthAllocation."
::= { qosIfQueueEntry 7 }
qosIfQueueBandwidthAllocation OBJECT-TYPE
SYNTAX INTEGER {
absolute(1), --use qosIfQueueAbsBandwidth
relative(2) --use qosIfQueueDrainSize
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies whether to configure the queue for
an absolute bandwidth limit or one that is relative to other
queues of the interface. i.e., whether to configure the queue
using qosIfQueueAbsBandwidth or qosIfQueueDrainSize."
::= { qosIfQueueEntry 8 }
qosIfQueueServiceOrder OBJECT-TYPE
SYNTAX QosInterfaceQueueCount
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to provide an additional level of
priority that is required for certain queuing disciplines
and when the different queues that comprise a queue set
are serviced using a mix of queuing disciplines. This
object can be used to specify, for example, the order in
which queues will be serviced when priority queuing is
used. It also supports the ability to describe the
servicing hierarchy when a hybrid queuing scheme, such
as priority queuing coupled with weighted fair queuing,
is used.
Queue service priority is assigned such that a lower
service order value indicates a higher priority. For
example, a priority queue with a value of 1 will be
serviced (i.e., drained) before another priority queue
with a service order value of 2.
Note that multiple queues that are logically associated,
based on the queuing discipline that is being employed,
will be assigned the same service order value. Under
this scenario, other parameters that are related to the
queuing discipline determine the order of queue servicing
(e.g., queue drain size is used for 'wfq').
For example, an interface that is associated with a queue
set supporting two priority queues and three queues that
are serviced using WFQ would be modeled as follows:
Q Index Q Discipline Q Drain Size Q Service Order
22 pq(1) - 1
23 pq(1) - 2
24 wfq(3) 500 3
25 wfq(3) 350 3
26 wfq(3) 150 3
The queue set presented in this example would service
all queued traffic in queue 22 first, followed by all of
the queued traffic in queue 23. Next the queued traffic
in queues 24 through 26 would be serviced in a round
robin fashion with queue 24 receiving 50% of the available
bandwidth, queue 25 receiving 35% of the available
bandwidth and queue 26 receiving 15% of the available
bandwidth. This example is presented for expository
purposes and has been simplified accordingly.
Note that, in this example, queues 24, 25 and 26 form a
queue cluster. Members of a queue cluster are all assigned
the same qosIfQueueServiceOrder as there are tightly
coupled. The qosIfQueueDrainSize attribute is used to
determine the additional processing characteristics of
the individual queues in a cluster."
::= { qosIfQueueEntry 9 }
qosIfQueueSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The size of the queue in bytes. Some devices set queue size
in terms of packets. These devices must calculate the queue
size in packets by assuming an average packet size suitable
for the particular interface.
Some devices have a fixed size buffer to be shared among all
queues. These devices must allocate a fraction of the
total buffer space to this queue calculated as the the ratio
of the queue size to the sum of the queue sizes for the
interface."
::= { qosIfQueueEntry 10 }
qosIfQueueStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
qosIfQueueStatus object is equal to active(1)."
DEFVAL { volatile }
::= { qosIfQueueEntry 11 }
qosIfQueueStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported."
::= { qosIfQueueEntry 12 }
--
-- DSCP Assignment Table
--
-- Supports the assignment of DSCPs to queues for each
-- interface type.
--
qosIfDscpAssignmentTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosIfDscpAssignmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Supports the assignment of DSCP values to a queue for
each interface with a specific queue count. There will be
64 instances of this class for each supported combination
of queue count and role combination."
::= { qosIfParameters 3 }
qosIfDscpAssignmentEntry OBJECT-TYPE
SYNTAX QosIfDscpAssignmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of the qosIfDscpAssignment class."
INDEX { qosIfDscpAssignmentId }
::= { qosIfDscpAssignmentTable 1 }
QosIfDscpAssignmentEntry ::= SEQUENCE {
qosIfDscpAssignmentId PolicyInstanceId,
qosIfDscpAssignmentRoles RoleCombination,
qosIfDscpAssignmentDscp Dscp,
qosIfDscpAssignmentQueue QosInterfaceQueueCount,
qosIfDscpAssignmentStorageType StorageType,
qosIfDscpAssignmentStatus RowStatus
}
qosIfDscpAssignmentId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that is used to uniquely identify the
instance of the qosIfDscpAssignment class."
::= { qosIfDscpAssignmentEntry 1 }
qosIfDscpAssignmentRoles OBJECT-TYPE
SYNTAX RoleCombination
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The role combination with which an interface must be
configured to support the DSCP-to-queue assignment
described by this instance. The specified role
combination must be defined in the qosInterfaceType
table prior to being referenced by this entry.
Otherwise a 'priAssociationUnknown(3)' error code
will be returned."
::= { qosIfDscpAssignmentEntry 2 }
qosIfDscpAssignmentDscp OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DSCP to which this class instance applies."
::= { qosIfDscpAssignmentEntry 3 }
qosIfDscpAssignmentQueue OBJECT-TYPE
SYNTAX QosInterfaceQueueCount
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The specific queue, within the queue set that is
associated with the interface set identified by the
qosIfDscpAssignmentRoles tag, on which traffic with
the specified DSCP, dictated by the
qosIfDscpAssignmentDscp value, is placed. Failure to
specify an appropriate queue results in a
'priAssociationConflict(4)' error indication being
returned."
::= { qosIfDscpAssignmentEntry 4 }
qosIfDscpAssignmentStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
qosIfDscpAssignmentStatus object is equal to active(1)."
DEFVAL { volatile }
::= { qosIfDscpAssignmentEntry 5 }
qosIfDscpAssignmentStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported."
::= { qosIfDscpAssignmentEntry 6 }
--
-- QoS Meter Table
--
-- The QoS Meter Table contains metering specifications that
-- can be used to provide an acceptable flow bandwidth
-- dimension to the Target table.
--
qosMeter OBJECT IDENTIFIER ::= { qosPolicyGenPibClasses 2 }
qosMeterTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosMeterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains the current set of configured meters. The
meters are associated with a classifier during
operation through the QoS Target Table."
::= { qosMeter 1 }
qosMeterEntry OBJECT-TYPE
SYNTAX QosMeterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"General metering definitions. Each entry specifies
an instance of the qosMeter class which specifies
metering information in terms of traffic stream
bandwidth parameters. An entry can thus be used to
support traffic metering based on the specified
service level specification."
INDEX { qosMeterId }
::= { qosMeterTable 1 }
QosMeterEntry ::= SEQUENCE {
qosMeterId PolicyInstanceId,
qosMeterDataSpecification INTEGER,
qosMeterCommittedRate Unsigned32,
qosMeterCommittedBurst Unsigned32,
qosMeterPeakRate Unsigned32,
qosMeterPeakBurst Unsigned32,
qosMeterHighConfAction PolicyInstanceIdOrZero,
qosMeterMedConfAction PolicyInstanceIdOrZero,
qosMeterLowConfAction PolicyInstanceIdOrZero,
qosMeterStorageType StorageType,
qosMeterStatus RowStatus,
qosMeterLabel SnmpAdminString
}
qosMeterId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer index that uniquely identifies
the instance of the qosMeter class. Meters are
associated with specific flows using this attribute
through the qosTargetMeter attribute in the QoS
Target class."
::= { qosMeterEntry 1 }
qosMeterDataSpecification OBJECT-TYPE
SYNTAX INTEGER {
noMeterData(1), -- no metering reqd
committedData(2), -- committed rate only
peakData(3), -- committed and peak
committedRestricted(4) -- limited committed rate
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the metering data, and thus the actions, that
are defined in a given entry.
A value of noMeterData(1) indicates that no flow metering
is necessary. All flows associated with this meter entry
are considered to be at a high level of conformance.
A value of committedData(2) indicates that committed rate
and committed burst information has been specified and will
be applied to associated flows. No peak rate and burst
information has been specified meaning that two levels
of conformance (high, medium) are supported.
A value of peakData(3) indicates that peak rate and peak
burst information has been provided in addition to the
committed rate and committed burst information. All provided
information will be applied to associated flows meaning that
three levels of conformance (high, medium, low) are
supported.
A value of committedRestricted(4) indicates that committed
rate and committed burst information has been specified and
will be applied to associated flows. No peak rate and burst
information has been specified meaning that two levels of
conformance (high, medium) are supported. Furthermore, the
non-conformant (out-of-profile) action is derived from the
ntnQosConfigDefaultOutOfProfileAction attribute. The out-of-
profile action can not be specified via the meter or policy
entry."
::= { qosMeterEntry 2 }
qosMeterCommittedRate OBJECT-TYPE
SYNTAX Unsigned32 (0..'ffffffff'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the committed information rate
(CIR) against which associated traffic streams will be
metered. The CIR specifies the rate at which incoming
traffic can arrive to be considered to be at a high
level of conformance. Typically, this value specifies
the rate at which tokens are added to a token bucket
used to meter received flows.
This object specifies a rate in bytes per second units
such that, for example, a value of 100 equates to a
committed information rate of 100 bytes per second.
Committed rate (and burst) information must be present
if the qosMeterDataSpecification object has the value
committedData(2) or peakRate(3). This, in turn, requires
that at least both high and medium conformance actions
be specified."
::= { qosMeterEntry 3 }
qosMeterCommittedBurst OBJECT-TYPE
SYNTAX Unsigned32 (0..'ffffffff'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the committed burst size
(CBS) against which associated traffic streams will
be metered. The CBS specifies the maximum burst size
that is supported for flows to be considered to be at
a high level of conformance. Typically, this value
represents the maximum number of tokens in a token
bucket.
This object specifies flow data in bytes per second
units such that, for example, a value of 100 equates
to a committed information rate of 100 bytes per
second.
Committed burst (and rate) information must be present
if the qosMeterDataSpecification object has the value
committedData(2) or peakRate(3). This, in turn, requires
that at least both high and medium conformance actions
be specified."
::= { qosMeterEntry 4 }
qosMeterPeakRate OBJECT-TYPE
SYNTAX Unsigned32 (0..'ffffffff'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the peak information rate (PIR)
against which associated traffic streams will be
metered. The PIR specifies the rate at which incoming
traffic can arrive to be considered to be at a medium
level of conformance. Typically, this value specifies
the rate at which tokens are added to a token bucket
used to meter received flows.
This object specifies a rate in bytes per second units
such that, for example, a value of 100 equates to a
committed information rate of 100 bytes per second.
Peak rate (and burst) information must be present
if the qosMeterDataSpecification object has the value
peakData(3). This, in turn, requires that high, medium
and low conformance actions be specified."
::= { qosMeterEntry 5 }
qosMeterPeakBurst OBJECT-TYPE
SYNTAX Unsigned32 (0..'ffffffff'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the peak burst size (PBS)
against which associated traffic streams will
be metered. The CBS specifies the maximum burst size
that is supported for flows to be considered to be at
a medium level of conformance. Typically, this value
represents the maximum number of tokens in a token
bucket.
This object specifies flow data in bytes per second
units such that, for example, a value of 100 equates
to a committed information rate of 100 bytes per
second.
Peak burst (and rate) information must be present
if the qosMeterDataSpecification object has the value
peakData(3). This, in turn, requires that high, medium
and low conformance actions be specified."
::= { qosMeterEntry 6 }
qosMeterHighConfAction OBJECT-TYPE
SYNTAX PolicyInstanceIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute identifies the action that is to be
initiated for flows that are determined to have a high
level of conformance with regard to metering criteria
being applied to the flow.
Actions must be defined in the qosActionTable prior to
being referenced by this attribute. A non-zero value for
this attribute must be provided prior to use unless an
in-profile action is specified in the associated
qosTargetTable entry."
::= { qosMeterEntry 7 }
qosMeterMedConfAction OBJECT-TYPE
SYNTAX PolicyInstanceIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute identifies the action that is to be
initiated for flows that are determined to have a medium
level of conformance with regard to metering criteria
being applied to the flow.
Actions must be defined in the qosActionTable prior to
being referenced by this attribute. A valid value for
this attribute must be provided prior to use if the value
of the associated qosMeterDataSpecification object is
committedRate(2) or peakRate(3) and an out-of-profile
action is not specified in the associated qosTargetTable
entry."
::= { qosMeterEntry 8 }
qosMeterLowConfAction OBJECT-TYPE
SYNTAX PolicyInstanceIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute identifies the action that is to be
initiated for flows that are determined to have a low
level of conformance with regard to metering criteria
being applied to the flow.
Actions must be defined in the qosActionTable prior to
being referenced by this attribute. A valid value for
this attribute must be provided if the value of the
associated qosMeterDataSpecification object is
peakRate(3)."
::= { qosMeterEntry 9 }
qosMeterStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
qosIfDscpAssignmentStatus object is equal to active(1)."
DEFVAL { volatile }
::= { qosMeterEntry 10 }
qosMeterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported."
::= { qosMeterEntry 11 }
qosMeterLabel OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A label used to reference the entry in a textual manner."
::= { qosMeterEntry 12 }
--
-- The Generic QoS ACL Action Group
--
qosAction OBJECT IDENTIFIER ::= { qosPolicyGenPibClasses 3 }
--
-- The QoS Action Table
--
-- The QoS Action Table describes actions that are associated with
-- specific IP, IEEE 802 and other ACLs through the QoS Target
-- Table. An action specification may be simple (i.e., a single
-- action) or complex (i.e., multiple actions that are performed
-- in "parallel").
--
qosActionTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains the current set of configured actions. The actions
are associated with IP, IEEE 802 and other ACLs and
interfaces during operation."
::= { qosAction 1 }
qosActionEntry OBJECT-TYPE
SYNTAX QosActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"General action definitions. Each entry specifies an instance
of the qosAction class which describes (potentially)
several distinct action attributes. Each action is taken
individually regarding the data in question. Several actions
can be taken for a single frame.
An instance of this class can not be deleted while it is being
referenced in a target instance in another class. This
class may be extended with actions that apply to specific QoS
policies (e.g., IP, IEEE 802, security) using augmentation."
INDEX { qosActionId }
::= { qosActionTable 1 }
QosActionEntry ::= SEQUENCE {
qosActionId PolicyInstanceId,
qosActionDrop TruthValue,
qosActionUpdateDSCP Integer32,
qosActionMeter PolicyInstanceId,
qosActionStorageType StorageType,
qosActionStatus RowStatus,
qosActionLabel SnmpAdminString
}
qosActionId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer index that uniquely identifies
the instance of the QoS Action class. Class instances
may not be contiguous. Actions are associated with
Target instances in other classes (e.g., the QoS
Target class) using this attribute."
::= { qosActionEntry 1 }
qosActionDrop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This action attribute, when specified, will cause the
frame being evaluated to be dropped if the value is
'true(1)'. A value of 'false(2)' indicates that this
action will not be initiated (i.e., the frame will not
be dropped) based on this attribute.
Prior to discarding a packet, other actions that have
been specified should be performed if they make protocol
sense. For example, requests for traffic mirroring (if
such an action is supported by a device) should be
honored. However, updating protocol header values will
typically not be necessary."
::= { qosActionEntry 2 }
qosActionUpdateDSCP OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This action component, when specified, will cause the
value contained in the Differentiated Services (DS)
field of an associated IP datagram to be updated with
the value of this object.
A value of -1 indicates that this action component has not
been set to an appropriate value and should not be used for
action initiation. The DSCP should remain unchanged."
::= { qosActionEntry 3 }
qosActionMeter OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This action component, when specified, will identify
another level of metering that should be applied to
the given flow. This action is only taken if it is
not in conflict with other specified actions, i.e.,
qosActionDrop.
A value of 0 indicates that an additional metering
component has not been specified. No additional metering
is thus required."
::= { qosActionEntry 4 }
qosActionStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
qosActionStatus object is equal to active(1)."
DEFVAL { volatile }
::= { qosActionEntry 5 }
qosActionStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported."
::= { qosActionEntry 6 }
qosActionLabel OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A label used to reference the entry in a textual manner."
::= { qosActionEntry 7 }
--
-- The QoS Target Table
--
-- The QoS Target Table supports the association of ACLs,
-- interfaces and actions. It allows ACL class instances, as
-- defined in various ACL Defintion classes, to be associated
-- with specific interfaces/flow direction (based on interface
-- role combination and traffic direction) and actions to be
-- performed based on traffic classification. Furthermore, it
-- allows heterogeneous ACL Definition class instances (e.g.,
-- IP, IEEE 802, security) to be applied to the same interface
-- group in a prescribed order of precedence.
--
qosTargetTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosTargetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A class that applies a set of ACLs to interfaces specifying,
for each interface, the precedence order of the ACL with
respect to other ACLs applied to the same interface and, for
each ACL, the action to take for a packet that matches a
permit ACE in that ACL. Interfaces are specified abstractly
in terms of interface roles.
This class may contain ACLs that specify different types
of traffic classification (e.g., IP ACLs and IEEE 802 ACLs
defined in their respective definition tables). An ACL is
identified by its class and instance within that class. An
ACL association is formed when ACLs apply to the same
interfaces, as determined by the specified interface role
and direction. ACL evaluation precedence within an
association is determined by the precedence attribute."
::= { qosAction 2 }
qosTargetEntry OBJECT-TYPE
SYNTAX QosTargetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of the qosTarget class. Instance creation
may be prohibited based on the status of certain class
attributes which must exist prior to class instantiation."
INDEX { qosTargetId }
::= { qosTargetTable 1 }
QosTargetEntry ::= SEQUENCE {
qosTargetId PolicyInstanceId,
qosTargetAclId PolicyInstanceId,
qosTargetAclType OBJECT IDENTIFIER,
qosTargetInterfaceRoles RoleCombination,
qosTargetInterfaceDirection INTEGER,
qosTargetOrder Unsigned32,
qosTargetMeter PolicyInstanceIdOrZero,
qosTargetStorageType StorageType,
qosTargetStatus RowStatus,
qosTargetShapingParams PolicyInstanceIdOrZero,
qosTargetShapingGroup Unsigned32,
qosTargetLabel SnmpAdminString,
qosTargetInProfileAction PolicyInstanceIdOrZero,
qosTargetOutOfProfileAction PolicyInstanceIdOrZero,
qosTargetUserGroupSession Unsigned32
}
qosTargetId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer index that uniquely identifies
the instance of the QoS Target class."
::= { qosTargetEntry 1 }
qosTargetAclId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute identifies the ACL that is associated
with this target. It identifies (potentially many) ACL
class instances in a specific ACL Definition table
where ACLs, and their associated ACEs, are defined.
For example, instances in the qosIpAclDefinitionTable
are identified by setting the value of this object
equal to the qosIpAclDefinitionAclId of the instances
being targeted. This value, together with the value of
the corresponding qosTargetAclType attribute,
uniquely identifies one or more instances of a specific
ACL Definition class.
Attempting to specify an unknown ACL class instance will
result in an appropriate error indication being returned
to the entity that is attempting to install the conflicting
entry. For example, a 'priUnknown(2)' error indication is
returned to the policy server in this situation."
::= { qosTargetEntry 2 }
qosTargetAclType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ACL Definition class that is being referenced by
this instance of the ACL Target class. This policy
class identifier, together with the corresponding
qosTargetAclId attribute, uniquely identifies
instances of a specific ACL Definition class.
The object identifier value of this attribute must
exist in the policyPrcSupportTable."
::= { qosTargetEntry 3 }
qosTargetInterfaceRoles OBJECT-TYPE
SYNTAX RoleCombination
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interfaces to which this ACL applies specified
in terms of a set of roles. The role combination
specified by this attribute must exist in the
qosInterfaceTypeTable prior to being association
with an instance of this class."
::= { qosTargetEntry 4 }
qosTargetInterfaceDirection OBJECT-TYPE
SYNTAX INTEGER {
in(1),
out(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The direction of packet flow at the interface in
question to which this ACL applies."
::= { qosTargetEntry 5 }
qosTargetOrder OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An integer that determines the precedence order of
this ACL in the list of ACLs applied to interfaces of
the specified role combination. An ACL with a given
precedence order is positioned in the list before one
with a higher-valued precedence order.
As an example, consider the following ACL Target association:
Index IfRoleCombo IfDirection AclId AclType Order
14 'eth1000+L2+L3' 'in' 8 '802' 1
15 'eth1000+L2+L3' 'in' 3 '802' 2
16 'eth1000+L2+L3' 'in' 12 'IP' 3
17 'eth1000+L2+L3' 'in' 6 'IP' 4
18 'eth1000+L2+L3' 'in' 21 'IP' 5
Five distinct ACL specifications, 3 from an IP ACL
Definition class and 2 from an IEEE 802 ACL Definition class,
form an Acl Target association (e.g., based on the specified
interface role combination and direction attributes) with a
prescribed order of evaluation. The AclType and AclId
attributes identify the ACL Definition instances in their
respective classes.
Precedence values within an association must be unique
otherwise instance installation will be prohibited and an
error value will be returned."
::= { qosTargetEntry 6 }
qosTargetMeter OBJECT-TYPE
SYNTAX PolicyInstanceIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute identifies the meter that is associated
with this QoS Target instance. Meters are defined
in the qosMeterTable. The corresponding instance in
the qosMeter class (i.e., the class instance where
the qosMeterId is equal to the value of this object)
must exist prior to being associated with an ACL Target
entry.
A value equal to zero indicates that no metering is
requested."
::= { qosTargetEntry 7 }
qosTargetStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
qosTargetStatus object is equal to active(1)."
DEFVAL { volatile }
::= { qosTargetEntry 8 }
qosTargetStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported."
::= { qosTargetEntry 9 }
qosTargetShapingParams OBJECT-TYPE
SYNTAX PolicyInstanceIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute identifies the shaping specification
that is associated with this QoS Target instance. Shaping
parameters are defined in the ntnQosShapingParamsTable.
The corresponding instance in the ntnQosShapingParams class
(i.e., the class instance where the ntnQosShapingParamsId
is equal to the value of this object) must exist prior to
being associated with an Target entry. A value equal to 0
for this attribute indicates that no shaping criteria is
specified.
Note that a shaping specification may be indirectly
specified using the qosTargetShapingGroup attribute. The
shaping specification associated with the shaping group
is used in this case. Inconsistencies between the shaping
group shaping specification and a non-zero value provided
for this attribute results in an error."
DEFVAL { 0 }
::= { qosTargetEntry 10 }
qosTargetShapingGroup OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies a shaping group number. Aggregate
shaping across one or more QoS Target instances (i.e., shaping
traffic identified by one or more QoS Target entries as if
they were a single flow) is supported by assigning the same
shaping group number to multiple QoS Target entries. A value
equal to 0 for this attribute indicates that aggregate shaping
with one or more existing policies is not specified.
Note that a shaping specification may be indirectly specified
using this attribute. The shaping specification associated
with the shaping group, if it already exists, is used in this
case. Inconsistencies between the shaping group shaping
specification and a non-zero value for the qosTargetShapingParams
attribute results in an error."
DEFVAL { 0 }
::= { qosTargetEntry 11 }
qosTargetLabel OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A label used to reference the entry in a textual manner."
::= { qosTargetEntry 12 }
qosTargetInProfileAction OBJECT-TYPE
SYNTAX PolicyInstanceIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute identifies the action that is to be
initiated for flows that are determined to be in-profile
with regard to metering criteria being applied to the
flow. If no metering criteria is specified, all flows
matching a given target specification are considered
in-profile.
Actions must be defined in the qosActionTable prior to
being referenced by this attribute. A non-zero value for
this attribute must be provided unless an in-profile
(high conformance) action is specified and associated
with a meter identified by the qosTargetMeter attribute."
DEFVAL { 0 }
::= { qosTargetEntry 13 }
qosTargetOutOfProfileAction OBJECT-TYPE
SYNTAX PolicyInstanceIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute identifies the action that is to be
initiated for flows that are determined to be out-of-
profile with regard to metering criteria being applied
to the flow.
Actions must be defined in the qosActionTable prior to
being referenced by this attribute. An out-of-profile
action is required if metering is requested (i.e., the
associated meter's qosMeterDataSpecification object is
`committedRate` or `peakRate`). A non-zero value for
this attribute must be provided unless an out-of-profile
(meduim conformance) action is specified and associated
with a meter identified by the qosTargetMeter attribute."
DEFVAL { 0 }
::= { qosTargetEntry 14 }
qosTargetUserGroupSession OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute identifies a user group session to which
the specified policy criteria is to be applied. The identified
user group session must exist in the User Role Table for the
policy installation to succeed. This attribute is thus used
to synchronize state for user-based policies. The attribute
ntnQosUserRoleSessionGroup in the User Role Table identifies
current (i.e., applicable) user group sessions. Furthermore,
the specified qosTargetInterfaceRoles role combination
identifies a user role (and not an interface role) when the
value of this attribute is non-zero.
A value of zero for this attribute indicates that the policy
is not to be applied to a specific set of users. In this case,
policy is applied based on the standard interface-to-role
associations specified in the ntnQosInterfaceIdTable."
DEFVAL { 0 }
::= { qosTargetEntry 15 }
--
-- The IP Classification and Policing Group
--
qosIpQos OBJECT IDENTIFIER ::= { qosPolicyIpPibClasses 1 }
-- The IP ACE Table
qosIpAceTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosIpAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ACE definitions. A packet has to match all fields in an
ACE. Wildcards may be specified for those fields that are
not relevant."
::= { qosIpQos 1 }
qosIpAceEntry OBJECT-TYPE
SYNTAX QosIpAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of the qosIpAce class."
INDEX { qosIpAceId }
::= { qosIpAceTable 1 }
QosIpAceEntry ::= SEQUENCE {
qosIpAceId PolicyInstanceId,
qosIpAceDstAddr IpAddress,
qosIpAceDstAddrMask IpAddress,
qosIpAceSrcAddr IpAddress,
qosIpAceSrcAddrMask IpAddress,
qosIpAceDscp Integer32,
qosIpAceProtocol INTEGER,
qosIpAceDstL4PortMin INTEGER,
qosIpAceDstL4PortMax INTEGER,
qosIpAceSrcL4PortMin INTEGER,
qosIpAceSrcL4PortMax INTEGER,
qosIpAcePermit TruthValue,
qosIpAceStorageType StorageType,
qosIpAceStatus RowStatus
}
qosIpAceId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index to uniquely identify this ACE among all the
ACEs."
::= { qosIpAceEntry 1 }
qosIpAceDstAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address to match against the packet's destination IP
address."
::= { qosIpAceEntry 2 }
qosIpAceDstAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A mask for the matching of the destination IP address.
A zero bit in the mask means that the corresponding bit in
the address always matches."
::= { qosIpAceEntry 3 }
qosIpAceSrcAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address to match against the packet's source IP
address."
::= { qosIpAceEntry 4 }
qosIpAceSrcAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A mask for the matching of the source IP address."
::= { qosIpAceEntry 5 }
qosIpAceDscp OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value that the DSCP in the packet can have and
match this ACE. A value of -1 indicates that a specific
DSCP value has not been defined and thus all DSCP values
are considered a match."
::= { qosIpAceEntry 6 }
qosIpAceProtocol OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP protocol to match against the packet's protocol.
A value of zero means match all."
::= { qosIpAceEntry 7 }
qosIpAceDstL4PortMin OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum value that the packet's layer 4 destination
port number can have and match this ACE. The value of
this attribute must be less-than-or-equal-to the value of
the corresponding qosIpAceDstL4PortMax attribute."
::= { qosIpAceEntry 8 }
qosIpAceDstL4PortMax OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum value that the packet's layer 4 destination
port number can have and match this ACE. The value of
this attribute must be greater-than-or-equal-to the value
of the corresponding qosIpAceDstL4PortMin attribute."
::= { qosIpAceEntry 9 }
qosIpAceSrcL4PortMin OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum value that the packet's layer 4 source port
number can have and match this ACE. The value of this
attribute must be less-than-or-equal-to the value of
the corresponding qosIpAceSrcL4PortMax attribute."
::= { qosIpAceEntry 10 }
qosIpAceSrcL4PortMax OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum value that the packet's layer 4 source port
number can have and match this ACE. The value of this
attribute must be greater-than-or-equal-to the value of
the corresponding qosIpAceSrcL4PortMin attribute."
::= { qosIpAceEntry 11 }
qosIpAcePermit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the packet matches this ACE and the value of this
attribute is true, then the matching process terminates
and the QoS associated with this ACE (indirectly through
the ACL) is applied to the packet. If the value of this
attribute is false, then no more ACEs in this ACL are
compared to this packet and matching continues with the
first ACE of the next ACL."
::= { qosIpAceEntry 12 }
qosIpAceStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
qosIpAceStatus object is equal to active(1)."
DEFVAL { volatile }
::= { qosIpAceEntry 13 }
qosIpAceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported."
::= { qosIpAceEntry 14 }
--
-- The IP ACL Definition Table
--
qosIpAclDefinitionTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosIpAclDefinitionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A class that defines a set of ACLs each being an ordered list
of ACEs. Each instance of this class identifies one ACE of
an ACL and the precedence order of that ACE with respect to
other ACEs in the same ACL."
::= { qosIpQos 2 }
qosIpAclDefinitionEntry OBJECT-TYPE
SYNTAX QosIpAclDefinitionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of the qosIpAclDefinition class."
INDEX { qosIpAclDefinitionId }
::= { qosIpAclDefinitionTable 1 }
QosIpAclDefinitionEntry ::= SEQUENCE {
qosIpAclDefinitionId PolicyInstanceId,
qosIpAclDefinitionAclId PolicyInstanceId,
qosIpAclDefinitionAceId PolicyInstanceId,
qosIpAclDefinitionAceOrder Unsigned32,
qosIpAclDefinitionStorageType StorageType,
qosIpAclDefinitionStatus RowStatus,
qosIpAclDefinitionLabel SnmpAdminString
}
qosIpAclDefinitionId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique index of this policy rule instance."
::= { qosIpAclDefinitionEntry 1 }
qosIpAclDefinitionAclId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An ID for this ACL. There will be one instance of
the class qosIpAclDefinition with this ID for each ACE in
the ACL per role combination."
::= { qosIpAclDefinitionEntry 2 }
qosIpAclDefinitionAceId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the ACE in the qosIpAceTable that
is in the ACL specified by qosIpAclIndex at the position
specified by qosIpAceOrder.
Attempting to specify an unknown class instance will result
in an appropriate error indication being returned to the
entity that is attempting to install the conflicting entry.
For example, a 'priUnknown(2)' error indication is returned
to the policy server in this situation."
::= { qosIpAclDefinitionEntry 3 }
qosIpAclDefinitionAceOrder OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The precedence order of this ACE. The precedence order
determines the position of this ACE in the ACL. An ACE with
a given precedence order is positioned in the access control
list before one with a higher-valued precedence order.
Precedence values within a group must be unique otherwise
instance installation will be prohibited and an error
value will be returned."
::= { qosIpAclDefinitionEntry 4 }
qosIpAclDefinitionStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
qosIpAclDefinitionStatus object is equal to active(1)."
DEFVAL { volatile }
::= { qosIpAclDefinitionEntry 5 }
qosIpAclDefinitionStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported."
::= { qosIpAclDefinitionEntry 6 }
qosIpAclDefinitionLabel OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A label used to reference the filter group in a textual
manner. All members of the same group, as determined by
the value of the qosIpAclDefinitionAclId attribute,
must have the same label."
::= { qosIpAclDefinitionEntry 7 }
--
-- Conformance Section
--
qosPolicyIpPibConformance
OBJECT IDENTIFIER ::= { qosPolicyIpPib 3 }
qosPolicyIpPibCompliances
OBJECT IDENTIFIER ::= { qosPolicyIpPibConformance 1 }
qosPolicyIpPibGroups
OBJECT IDENTIFIER ::= { qosPolicyIpPibConformance 2 }
qosPolicyIpPibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for conformance to the
QoS Policy IP PIB."
MODULE -- this module
MANDATORY-GROUPS { qosInterfaceTypeGroup,
qosIfQueueGroup,
qosMeterGroup,
qosActionGroup,
qosTargetGroup }
OBJECT qosInterfaceTypeRoles
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosInterfaceTypeQueueSet
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosInterfaceTypeCapabilities
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosInterfaceTypeStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required, nor is
support for the nonVolatile(2) enumeration."
OBJECT qosInterfaceTypeStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIfQueueSetId
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIfQueueIndex
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIfQueueGenDiscipline
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIfQueueExtDiscipline
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIfQueueDrainSize
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIfQueueAbsBandwidth
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIfQueueServiceOrder
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIfQueueSize
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIfQueueStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required, nor is
support for the nonVolatile(2) enumeration."
OBJECT qosIfQueueStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosMeterDataSpecification
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosMeterCommittedRate
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosMeterCommittedBurst
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosMeterPeakRate
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosMeterPeakBurst
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosMeterHighConfAction
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosMeterMedConfAction
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosMeterLowConfAction
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosMeterStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required, nor is
support for the nonVolatile(2) enumeration."
OBJECT qosMeterStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosMeterLabel
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosActionDrop
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosActionUpdateDSCP
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosActionMeter
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosActionStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required, nor is
support for the nonVolatile(2) enumeration."
OBJECT qosActionStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosActionLabel
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosTargetAclId
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosTargetAclType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosTargetInterfaceRoles
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosTargetInterfaceDirection
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosTargetOrder
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosTargetMeter
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosTargetStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required, nor is
support for the nonVolatile(2) enumeration."
OBJECT qosTargetStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosTargetShapingParams
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosTargetShapingGroup
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosTargetLabel
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosTargetInProfileAction
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosTargetOutOfProfileAction
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosTargetUserGroupSession
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
GROUP qosIfDscpAssignmentGroup
DESCRIPTION
"The qosIfDscpAssignmentGroup is mandatory if traffic
queue assignment based on DSCP is supported."
OBJECT qosIfDscpAssignmentRoles
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIfDscpAssignmentDscp
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIfDscpAssignmentQueue
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIfDscpAssignmentStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required, nor is
support for the nonVolatile(2) enumeration."
OBJECT qosIfDscpAssignmentStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
GROUP qosIpAceGroup
DESCRIPTION
"The qosIpAceGroup is mandatory if filtering
based on IP traffic components is supported."
OBJECT qosIpAceDstAddr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIpAceDstAddrMask
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIpAceSrcAddr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIpAceSrcAddrMask
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIpAceDscp
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIpAceProtocol
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIpAceDstL4PortMin
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIpAceDstL4PortMax
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIpAceSrcL4PortMin
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIpAceSrcL4PortMax
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIpAcePermit
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIpAceStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required, nor is
support for the nonVolatile(2) enumeration."
OBJECT qosIpAceStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
GROUP qosIpAclDefinitionGroup
DESCRIPTION
"The qosIpAclDefinitionGroup is mandatory if filtering
based on IP traffic components is supported."
OBJECT qosIpAclDefinitionAclId
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIpAclDefinitionAceId
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIpAclDefinitionAceOrder
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIpAclDefinitionStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required, nor is
support for the nonVolatile(2) enumeration."
OBJECT qosIpAclDefinitionStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qosIpAclDefinitionLabel
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
::= { qosPolicyIpPibCompliances 1 }
qosInterfaceTypeGroup OBJECT-GROUP
OBJECTS {
qosInterfaceTypeRoles,
qosInterfaceTypeQueueSet,
qosInterfaceTypeCapabilities,
qosInterfaceTypeStorageType,
qosInterfaceTypeStatus
}
STATUS current
DESCRIPTION
"Objects from the qosInterfaceTypeTable."
::= { qosPolicyIpPibGroups 1 }
qosIfQueueGroup OBJECT-GROUP
OBJECTS {
qosIfQueueSetId,
qosIfQueueIndex,
qosIfQueueGenDiscipline,
qosIfQueueExtDiscipline,
qosIfQueueDrainSize,
qosIfQueueAbsBandwidth,
qosIfQueueBandwidthAllocation,
qosIfQueueServiceOrder,
qosIfQueueSize,
qosIfQueueStorageType,
qosIfQueueStatus
}
STATUS current
DESCRIPTION
"Objects from the qosIfQueueTable."
::= { qosPolicyIpPibGroups 2 }
qosIfDscpAssignmentGroup OBJECT-GROUP
OBJECTS {
qosIfDscpAssignmentRoles,
qosIfDscpAssignmentDscp,
qosIfDscpAssignmentQueue,
qosIfDscpAssignmentStorageType,
qosIfDscpAssignmentStatus
}
STATUS current
DESCRIPTION
"Objects from the qosIfDscpAssignmentTable."
::= { qosPolicyIpPibGroups 3 }
qosMeterGroup OBJECT-GROUP
OBJECTS {
qosMeterDataSpecification,
qosMeterCommittedRate,
qosMeterCommittedBurst,
qosMeterPeakRate,
qosMeterPeakBurst,
qosMeterHighConfAction,
qosMeterMedConfAction,
qosMeterLowConfAction,
qosMeterStorageType,
qosMeterStatus,
qosMeterLabel
}
STATUS current
DESCRIPTION
"Objects from the qosMeterTable."
::= { qosPolicyIpPibGroups 4 }
qosActionGroup OBJECT-GROUP
OBJECTS {
qosActionDrop,
qosActionUpdateDSCP,
qosActionMeter,
qosActionStorageType,
qosActionStatus,
qosActionLabel
}
STATUS current
DESCRIPTION
"Objects from the qosActionTable."
::= { qosPolicyIpPibGroups 5 }
qosTargetGroup OBJECT-GROUP
OBJECTS {
qosTargetAclId,
qosTargetAclType,
qosTargetInterfaceRoles,
qosTargetInterfaceDirection,
qosTargetOrder,
qosTargetMeter,
qosTargetStorageType,
qosTargetStatus,
qosTargetShapingParams,
qosTargetShapingGroup,
qosTargetLabel,
qosTargetInProfileAction,
qosTargetOutOfProfileAction,
qosTargetUserGroupSession
}
STATUS current
DESCRIPTION
"Objects from the qosTargetTable."
::= { qosPolicyIpPibGroups 6 }
qosIpAceGroup OBJECT-GROUP
OBJECTS {
qosIpAceDstAddr,
qosIpAceDstAddrMask,
qosIpAceSrcAddr,
qosIpAceSrcAddrMask,
qosIpAceDscp,
qosIpAceProtocol,
qosIpAceDstL4PortMin,
qosIpAceDstL4PortMax,
qosIpAceSrcL4PortMin,
qosIpAceSrcL4PortMax,
qosIpAcePermit,
qosIpAceStorageType,
qosIpAceStatus
}
STATUS current
DESCRIPTION
"Objects from the qosIpAceTable."
::= { qosPolicyIpPibGroups 7 }
qosIpAclDefinitionGroup OBJECT-GROUP
OBJECTS {
qosIpAclDefinitionAclId,
qosIpAclDefinitionAceId,
qosIpAclDefinitionAceOrder,
qosIpAclDefinitionStorageType,
qosIpAclDefinitionStatus,
qosIpAclDefinitionLabel
}
STATUS current
DESCRIPTION
"Objects from the qosIpAclDefinitionTable."
::= { qosPolicyIpPibGroups 8 }
END
Reference in New Issue View Git Blame Copy Permalink