snmp_mib_archive/CPQKVM.MIB
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1086 lines
38 KiB
Plaintext
Executable File

--------------------------------------------------------------------------------
-- HP IP Console Switch - MIB
-- Management Information Base for SNMP Network Management
--
-- Revision: 1.1
-- *********************************************************************
-- Release History
-- Date: April 10, 2003 (Corrected Spelling Errors)
-- Revised by Brian Spencer
-- Date: April 1, 2003 (Added Category,Trap Type, Time Index to Lockout Traps)
-- Revised by Mark Spence
-- Date: October 22, 2002
-- Initial 1.1 Release
-- *********************************************************************
--
-- Copyright 2002 Hewlett-Packard Corporation. All Rights Reserved.
--
-- The information in this document is subject to change without notice.
--
--------------------------------------------------------------------------------
--
-- The Compaq Enterprise number is 232.
-- The ASN.1 prefix to, and including the Compaq Enterprise is: 1.3.6.1.4.1.232
--
CPQKVM-MIB DEFINITIONS ::= BEGIN
IMPORTS
compaq FROM CPQHOST-MIB
Gauge FROM RFC1155-SMI
enterprises FROM RFC1155-SMI
TimeTicks FROM RFC1155-SMI
IpAddress FROM RFC1155-SMI
Counter FROM RFC1155-SMI
NetworkAddress FROM RFC1155-SMI
OBJECT-TYPE FROM RFC-1212
DisplayString FROM RFC1213-MIB
PhysAddress FROM RFC1213-MIB
TRAP-TYPE FROM RFC-1215;
-- Note: uncomment the following compaq OBJECT IDENTIFIER and comment out
-- "compaq FROM CPQHOST-MIB" above to compile without the CPQHOST-MIB
-- compaq OBJECT IDENTIFIER ::= { enterprises 232 }
--------------------------------------------------------------------------------
-- Object Groupings
--------------------------------------------------------------------------------
-- Note: every product type should be uniquely identified underneath the
-- cpqKvmProducts object group. Each product should report its unique
-- cpqKvmProducts OBJECT IDENTIFIER in mib-2.system.sysObjectID. The following
-- products are currently defined:
--
-- cpqKvmProducts.1 = Compaq IP Console Switch 1x1x16
-- cpqKvmProducts.2 = Compaq IP Console Switch 3x1x16
--
cpqKvm OBJECT IDENTIFIER ::= { compaq 160 } -- 1.3.6.1.4.1.232.160
cpqKvmProducts OBJECT IDENTIFIER ::= { cpqKvm 1 } -- 1.3.6.1.4.1.232.160.1
cpqKvmManagement OBJECT IDENTIFIER ::= { cpqKvm 2 } -- 1.3.6.1.4.1.232.160.2
cpqKvmTrapObject OBJECT IDENTIFIER ::= { cpqKvmManagement 6 } -- 1.3.6.1.4.1.232.160.2.6
--------------------------------------------------------------------------------
-- Trap Object Group (cpqKvmTrapObject) 1.3.6.1.4.1.232.160.2.6
--
-- The following objects are implemented only for the generation of
-- TRAPs. The objects are sent in traps and are not accessible in
-- any other way.
--------------------------------------------------------------------------------
cpqKvmTrapObjectUserName OBJECT-TYPE
SYNTAX UTF8String ( SIZE (3..16) )
ACCESS not-accessible
STATUS mandatory
--% AVAILABILITY public
DESCRIPTION
"This object is sent in a trap to identify the name of the user
for which the trap condition occurred. If the trap condition occurred
as a result of activity on the local port (OSD), then the value of this
object will be the following string:
local port
"
::= { cpqKvmTrapObject 1 }
cpqKvmTrapObjectTargetUserName OBJECT-TYPE
SYNTAX UTF8String ( SIZE (3..16) )
ACCESS not-accessible
STATUS mandatory
--% AVAILABILITY public
DESCRIPTION
"This object is sent in a trap to identify the name of the target
user for which a trap condition occurred.
"
::= { cpqKvmTrapObject 2 }
cpqKvmTrapObjectImageType OBJECT-TYPE
SYNTAX UTF8String ( SIZE (0..64) )
ACCESS not-accessible
STATUS mandatory
--% AVAILABILITY public
DESCRIPTION
"This object is sent in a trap to identify the type of software image
for which the trap condition occurred.
"
::= { cpqKvmTrapObject 3 }
cpqKvmTrapObjectImageNewVersion OBJECT-TYPE
SYNTAX UTF8String ( SIZE (0..32) )
ACCESS not-accessible
STATUS mandatory
--% AVAILABILITY public
DESCRIPTION
"This object is sent in a trap to identify the version of the new
software image the console switch is being upgraded to.
"
::= { cpqKvmTrapObject 4 }
cpqKvmTrapObjectImageCurrentVersion OBJECT-TYPE
SYNTAX UTF8String ( SIZE (0..32) )
ACCESS not-accessible
STATUS mandatory
--% AVAILABILITY public
DESCRIPTION
"This object is sent in a trap to identify the version of the
software image that the console switch is currently running.
"
::= { cpqKvmTrapObject 5 }
cpqKvmTrapObjectImageUpgradeResults OBJECT-TYPE
SYNTAX UTF8String ( SIZE (0..64) )
ACCESS not-accessible
STATUS mandatory
--% AVAILABILITY public
DESCRIPTION
"This object is sent in a trap to report the results of a
TFTP image upgrade."
::= { cpqKvmTrapObject 6 }
cpqKvmTrapObjectSessionIdentifier OBJECT-TYPE
SYNTAX UTF8String ( SIZE (0..32) )
ACCESS not-accessible
STATUS mandatory
--% AVAILABILITY public
DESCRIPTION
"This object is sent in a trap to identify the session
for which the trap condition occurred. The value will be
the name of a server if the server name is known, otherwise
the value will be the connection path to a server.
If the value is a connection path it will have the following format:
IA i:Channel c
Where i is the ID of the interface adapter, and c is the cascade switch
channel number (0 if there is no switch in the path).
"
::= { cpqKvmTrapObject 7 }
cpqKvmTrapObjectIaId OBJECT-TYPE
SYNTAX UTF8String ( SIZE (0..32) )
ACCESS not-accessible
STATUS mandatory
--% AVAILABILITY public
DESCRIPTION
"This object is sent in a trap to identify the interface adapter for
which the trap condition occurred.
"
::= { cpqKvmTrapObject 8 }
cpqKvmTrapObjectCascadeSwitchName OBJECT-TYPE
SYNTAX UTF8String ( SIZE (0..15) )
ACCESS not-accessible
STATUS mandatory
--% AVAILABILITY public
DESCRIPTION
"This object is sent in a trap to identify the cascade switch for
which the trap condition occurred.
"
::= { cpqKvmTrapObject 9 }
cpqKvmTrapObjectOldCascadeSwitchName OBJECT-TYPE
SYNTAX UTF8String ( SIZE (0..15) )
ACCESS not-accessible
STATUS mandatory
--% AVAILABILITY public
DESCRIPTION
"This object is sent in a trap to identify the old name of a cascade
switch whose name was changed.
"
::= { cpqKvmTrapObject 10 }
cpqKvmTrapObjectServerName OBJECT-TYPE
SYNTAX UTF8String ( SIZE (0..15) )
ACCESS not-accessible
STATUS mandatory
--% AVAILABILITY public
DESCRIPTION
"This object is sent in a trap to identify the server for
which the trap condition occurred.
"
::= { cpqKvmTrapObject 11 }
cpqKvmTrapObjectOldServerName OBJECT-TYPE
SYNTAX UTF8String ( SIZE (0..15) )
ACCESS not-accessible
STATUS mandatory
--% AVAILABILITY public
DESCRIPTION
"This object is sent in a trap to identify the old name of a server
whose name was changed.
"
::= { cpqKvmTrapObject 12 }
cpqKvmTrapObjectFileName OBJECT-TYPE
SYNTAX DisplayString ( SIZE (0..12) )
ACCESS not-accessible
STATUS mandatory
--% AVAILABILITY public
DESCRIPTION
"This object is sent in a trap to identify the name of a file
for which the trap condition occurred.
"
::= { cpqKvmTrapObject 13 }
cpqKvmTrapObjectFirmwareCondition OBJECT-TYPE
SYNTAX OCTET STRING ( SIZE (0..64) )
ACCESS not-accessible
STATUS mandatory
--% AVAILABILITY public
DESCRIPTION
"This trap message will contain data for application specific
diagnostics. It is designed in provision for diagnostic help
for installation-specific problems, would require the operator
to install firmware provided to isolate their particular problems
and to enable the trap to report conditions.
The contents will be an Application Message Packet with
the address, size, and command header removed. The parameters
of the message will depend on the specific problem the firmware
is designed to detect and report.
"
::= { cpqKvmTrapObject 14 }
cpqKvmTrapObjectDeviceId OBJECT-TYPE
SYNTAX UTF8String ( SIZE (0..32) )
ACCESS not-accessible
STATUS mandatory
--% AVAILABILITY public
DESCRIPTION
"This object is sent in a trap to identify the device for which
the trap condition occurred.
"
::= { cpqKvmTrapObject 15 }
cpqKvmTrapObjectAlarmCondition OBJECT-TYPE
SYNTAX INTEGER {
alarm(1),
ok(2)
}
ACCESS not-accessible
STATUS mandatory
--% AVAILABILITY public
DESCRIPTION
"This object is sent in a trap to identify Warning/Alarm activity for
the device on which the trap condition occurred.
Alarm sets the alarm, OK indicates the condition has cleared up.
"
::= { cpqKvmTrapObject 16 }
cpqKvmTrapObjectAlarmDescription OBJECT-TYPE
SYNTAX UTF8String ( SIZE (0..64) )
ACCESS not-accessible
STATUS mandatory
--% AVAILABILITY public
DESCRIPTION
"This object is sent in a trap to explain the Warning/Alarm condition
for which the trap condition occurred. This is intended for display
or logging.
"
::= { cpqKvmTrapObject 17 }
cpqKvmTrapObjectLockReason OBJECT-TYPE
SYNTAX UTF8String ( SIZE (0..64) )
ACCESS not-accessible
STATUS mandatory
--% AVAILABILITY public
DESCRIPTION
"This object is sent in a trap to explain the reason for which a
user account has been locked.
"
::= { cpqKvmTrapObject 18 }
cpqKvmTrapObjectUnlockReason OBJECT-TYPE
SYNTAX UTF8String ( SIZE (0..64) )
ACCESS not-accessible
STATUS mandatory
--% AVAILABILITY public
DESCRIPTION
"This object is sent in a trap to explain the reason for which a
user account has been unlocked.
"
::= { cpqKvmTrapObject 19 }
cpqKvmTrapObjectIPAddress OBJECT-TYPE
SYNTAX DisplayString( SIZE (0..32) )
ACCESS not-accessible
STATUS mandatory
--% AVAILABILITY public
DESCRIPTION
"This object is sent in a trap to identify the IP address for
which a trap condition occurred.
"
::= { cpqKvmTrapObject 20 }
--------------------------------------------------------------------------------
-- Enterprise Traps
--------------------------------------------------------------------------------
cpqKvmRebootStartedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES { cpqKvmTrapObjectUserName }
DESCRIPTION
"The console switch is in the process of rebooting.
The name of the user who initiated the reboot
is contained in cpqKvmTrapObjectUserName.
"
--#TYPE "Reboot Trap"
--#SUMMARY "The console switch is rebooting. Command issued by user: %s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "SYSTEM AND ENVIRONMENTAL"
--#TIMEINDEX 99
::= 1
cpqKvmUserLoginTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES { cpqKvmTrapObjectUserName }
DESCRIPTION
"A user logged into the console switch.
The name of the user who logged in
is contained in cpqKvmTrapObjectUserName.
"
--#TYPE "User Login Trap"
--#SUMMARY "User logged into the console switch. User: %s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "REMOTE MONITORING AND MANAGEMENT"
--#TIMEINDEX 99
::= 2
cpqKvmUserLogoutTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES { cpqKvmTrapObjectUserName }
DESCRIPTION
"A user logged out of the console switch.
The name of the user who logged out is contained
in cpqKvmTrapObjectUserName.
"
--#TYPE "User Logout Trap"
--#SUMMARY "User logged out of the console switch. User: %s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "REMOTE MONITORING AND MANAGEMENT"
--#TIMEINDEX 99
::= 3
cpqKvmVideoSessionStartedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectUserName,
cpqKvmTrapObjectSessionIdentifier
}
DESCRIPTION
"A video session has started.
The name of the user who is connected to the session
is contained in cpqKvmTrapObjectUserName.
The session identifier is contained in
cpqKvmTrapObjectSessionIdentifier.
"
--#TYPE "Video Session Started Trap"
--#SUMMARY "Video session started. User: %s. Server: %s."
--#ARGUMENTS { 0, 1 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "REMOTE MONITORING AND MANAGEMENT"
--#TIMEINDEX 99
::= 4
cpqKvmVideoSessionStoppedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectUserName,
cpqKvmTrapObjectSessionIdentifier
}
DESCRIPTION
"A video session has stopped.
The name of the user who was connected to the session
is contained in cpqKvmTrapObjectUserName.
The session identifier is contained in
cpqKvmTrapObjectSessionIdentifier.
"
--#TYPE "Video Session Stopped Trap"
--#SUMMARY "Video session stopped. User: %s. Server: %s"
--#ARGUMENTS { 0, 1 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "REMOTE MONITORING AND MANAGEMENT"
--#TIMEINDEX 99
::= 5
cpqKvmVideoSessionTerminatedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectUserName,
cpqKvmTrapObjectTargetUserName,
cpqKvmTrapObjectSessionIdentifier
}
DESCRIPTION
"A video session has been terminated by another
user.
The name of the user who terminated the session is
contained in cpqKvmTrapObjectUserName.
The name of the user who was terminated from the session
is contained in cpqKvmTrapObjectTargetUserName.
The session identifier is contained in
cpqKvmTrapObjectSessionIdentifier.
"
--#TYPE "Video Session Terminated Trap"
--#SUMMARY "Video session terminated. Command issued by user: %s. Terminated user: %s. Server: %s."
--#ARGUMENTS { 0, 1, 2 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "REMOTE MONITORING AND MANAGEMENT"
--#TIMEINDEX 99
::= 6
cpqKvmLocalPortViewingStartedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES { cpqKvmTrapObjectSessionIdentifier }
DESCRIPTION
"A user on the local port has started viewing a server.
The session identifier is contained in
cpqKvmTrapObjectSessionIdentifier.
"
--#TYPE "Local Port Viewing Started Trap"
--#SUMMARY "Viewing started on the local port. Server: %s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "SYSTEM AND ENVIRONMENTAL"
--#TIMEINDEX 99
::= 7
cpqKvmLocalPortViewingStoppedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES { cpqKvmTrapObjectSessionIdentifier }
DESCRIPTION
"A user on the local port has stopped viewing a server.
The session identifier is contained in
cpqKvmTrapObjectSessionIdentifier.
"
--#TYPE "Local Port Viewing Stopped Trap"
--#SUMMARY "Viewing stopped on the local port. Server: %s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "SYSTEM AND ENVIRONMENTAL"
--#TIMEINDEX 99
::= 8
cpqKvmImageUpgradeStarted TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectUserName,
cpqKvmTrapObjectImageType,
cpqKvmTrapObjectImageNewVersion,
cpqKvmTrapObjectImageCurrentVersion
}
DESCRIPTION
"The console switch has started a TFTP upgrade of an image.
The name of the user who initiated the TFTP image upgrade is
contained in cpqKvmTrapObjectUserName.
The type of image that is being upgraded is contained
in cpqKvmTrapObjectImageType.
The version of the image that the console switch is upgrading to is
contained in cpqKvmTrapObjectImageNewVersion.
The version of the image that the console switch is currently running
is contained in cpqKvmTrapObjectImageCurrentVersion.
"
--#TYPE "Image Upgrade Started Trap"
--#SUMMARY "TFTP image upgrade started. Command issued by user: %s. Image type: %s. New version: %s. Current version: %s"
--#ARGUMENTS { 0, 1, 2, 3 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "REMOTE MONITORING AND MANAGEMENT"
--#TIMEINDEX 99
::= 9
cpqKvmImageUpgradeResultsTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES { cpqKvmTrapObjectImageUpgradeResults }
DESCRIPTION
"The results of a TFTP image upgrade."
--#TYPE "Image Upgrade Results Trap"
--#SUMMARY "%s"
--#ARGUMENTS { 0 }
--#CATEGORY "SYSTEM AND ENVIRONMENTAL"
--#SEVERITY INFORMATIONAL
::= 10
cpqKvmUserAddedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectUserName,
cpqKvmTrapObjectTargetUserName
}
DESCRIPTION
"A new user has been added to the local user database.
The name of the user who added the new user is contained
in cpqKvmTrapObjectUserName.
The name of the new user is contained in
cpqKvmTrapObjectTargetUserName.
"
--#TYPE "User Added Trap"
--#SUMMARY "New user added to local user database. Command issued by user: %s. New user: %s."
--#ARGUMENTS { 0, 1 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "REMOTE MONITORING AND MANAGEMENT"
--#TIMEINDEX 99
::= 11
cpqKvmUserDeletedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectUserName,
cpqKvmTrapObjectTargetUserName
}
DESCRIPTION
"A user has been deleted from the local user database.
The name of the user who deleted the user is contained
in cpqKvmTrapObjectUserName.
The name of the user who was deleted is contained
in cpqKvmTrapObjectTargetUserName.
"
--#TYPE "User Deleted Trap"
--#SUMMARY "User deleted from local user database. Command issued by user: %s. Deleted user: %s."
--#ARGUMENTS { 0, 1 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "REMOTE MONITORING AND MANAGEMENT"
--#TIMEINDEX 99
::= 12
cpqKvmUserModifiedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectUserName,
cpqKvmTrapObjectTargetUserName
}
DESCRIPTION
"A user was modified.
The name of the user who modified the user is contain
in cpqKvmTrapObjectUserName.
The name of the user who was modified is contained
in cpqKvmTrapObjectTargetUserName.
"
--#TYPE "User Modified Trap"
--#SUMMARY "User modified in local user database. Command issued by user: %s. Modified user: %s."
--#ARGUMENTS { 0, 1 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "REMOTE MONITORING AND MANAGEMENT"
--#TIMEINDEX 99
::= 13
cpqKvmUserAuthenticationFailureTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES { cpqKvmTrapObjectUserName }
DESCRIPTION
"A user failed to authenticate with the console switch.
The name of the user who failed to authenticate
is contained in cpqKvmTrapObjectUserName.
"
--#TYPE "User Authentication Failed Trap"
--#SUMMARY "User authentication failed with the console switch. User: %s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "REMOTE MONITORING AND MANAGEMENT"
--#TIMEINDEX 99
::= 14
cpqKvmIaAddedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES { cpqKvmTrapObjectIaId }
DESCRIPTION
"An interface adapter was added. The ID of the interface adapter which
was added is contained in cpqKvmTrapObjectIaId.
"
--#TYPE "Interface Adapter Added Trap"
--#SUMMARY "Interface adapter added. IA ID: %s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "SYSTEM AND ENVIRONMENTAL"
--#TIMEINDEX 99
::= 15
cpqKvmIaRemovedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES { cpqKvmTrapObjectIaId }
DESCRIPTION
"An interface adapter was removed. The ID of the interface adapter
which was removed is contained in cpqKvmTrapObjectIaId.
"
--#TYPE "Interface Adapter Removed Trap"
--#SUMMARY "Interface adapter removed. IA ID: %s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "SYSTEM AND ENVIRONMENTAL"
--#TIMEINDEX 99
::= 16
cpqKvmServerNameChangedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectOldServerName,
cpqKvmTrapObjectServerName,
cpqKvmTrapObjectIaId
}
DESCRIPTION
"The name of a server has changed.
The previous name of the server is contained in
cpqKvmTrapObjectOldServerName.
The new name of the server is contained in
cpqKvmTrapObjectServerName.
The ID of the interface adapter the server is attached to is
contained in cpqKvmTrapObjectIaId,
"
--#TYPE "Server Name Changed Trap"
--#SUMMARY "Server name changed. Old name: %s. New name: %s. Attached to IA: %s."
--#ARGUMENTS { 0, 1, 2 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "SYSTEM AND ENVIRONMENTAL"
--#TIMEINDEX 99
::= 17
cpqKvmCascadeSwitchAddedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectCascadeSwitchName,
cpqKvmTrapObjectIaId
}
DESCRIPTION
"A cascade switch was added. The name of the switch
which was added is contained in cpqKvmTrapObjectCascadeSwitchName.
The ID of the interface adapter the switch was added to is contained
in cpqKvmTrapObjectIaId.
"
--#TYPE "Cascade Switch Added Trap"
--#SUMMARY "Cascade switch added. Cascade switch name: %s. Attached to IA: %s."
--#ARGUMENTS { 0, 1 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "SYSTEM AND ENVIRONMENTAL"
--#TIMEINDEX 99
::= 18
cpqKvmCascadeSwitchRemovedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectCascadeSwitchName,
cpqKvmTrapObjectIaId
}
DESCRIPTION
"A cascade switch was removed. The name of the switch
which was removed is contained in cpqKvmTrapObjectCascadeSwitchName.
The ID of the interface adapter the switch was attached to is contained
in cpqKvmTrapObjectIaId.
"
--#TYPE "Cascade Switch Removed Trap"
--#SUMMARY "Cascade switch removed. Cascade switch name: %s. Was attached to IA: %s."
--#ARGUMENTS { 0, 1 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "SYSTEM AND ENVIRONMENTAL"
--#TIMEINDEX 99
::= 19
cpqKvmCascadeSwitchNameChangedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectOldCascadeSwitchName,
cpqKvmTrapObjectCascadeSwitchName,
cpqKvmTrapObjectIaId
}
DESCRIPTION
"The name of a cascade switch has changed.
The previous name of the cascade switch is contained in
cpqKvmTrapObjectOldCascadeSwitchName.
The new name of the cascade switch is contained in
cpqKvmTrapObjectCascadeSwitchName.
The ID of the interface adapter the switch is attached to is contained
in cpqKvmTrapObjectIaId.
"
--#TYPE "Cascade Switch Name Changed Trap"
--#SUMMARY "Cascade switch name changed. Old name: %s. New name: %s. Attached to IA: %s."
--#ARGUMENTS { 0, 1, 2 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "SYSTEM AND ENVIRONMENTAL"
--#TIMEINDEX 99
::= 20
cpqKvmConfigurationFileLoadedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectUserName,
cpqKvmTrapObjectFileName
}
DESCRIPTION
"The console switch has loaded a configuration file.
The name of the user who commanded the console switch to load the
configuration file is contained in cpqKvmTrapObjectUserName.
The name of the file that was loaded is contained in
cpqKvmTrapObjectFileName.
"
--#TYPE "Configuration File Loaded Trap"
--#SUMMARY "Configuration file loaded in the console switch. Command issued by user: %s. Name of file loaded: %s."
--#ARGUMENTS { 0, 1 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "REMOTE MONITORING AND MANAGEMENT"
--#TIMEINDEX 99
::= 21
cpqKvmUserDatabaseFileLoadedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectUserName,
cpqKvmTrapObjectFileName
}
DESCRIPTION
"The console switch has loaded a user database file.
The name of the user who commanded the console switch to load the
user database file is contained in cpqKvmTrapObjectUserName.
The name of the file that was loaded is contained in
cpqKvmTrapObjectFileName.
"
--#TYPE "Database File Loaded Trap"
--#SUMMARY "User database file loaded in the console switch. Command issued by user: %s. Name of file loaded: %s."
--#ARGUMENTS { 0, 1 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "REMOTE MONITORING AND MANAGEMENT"
--#TIMEINDEX 99
::= 22
cpqKvmInvalidHookupDetectedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectDeviceId,
cpqKvmTrapObjectFirmwareCondition
}
DESCRIPTION
"The console switch has detected an invalid connection.
This can include two interface adapters on a port where one or more
have a cascade switch, or some other illegal setup condition.
Information about the nature of the failure is stored in the
cpqKvmTrapObjectFirmwareCondition object.
"
--#TYPE "Status Trap"
--#SUMMARY "Invalid connection detected. Device ID: %s."
--#ARGUMENTS { 0 }
--#SEVERITY MAJOR
--#CATEGORY "SYSTEM AND ENVIRONMENTAL"
--#TIMEINDEX 99
::= 23
cpqKvmSubsystemUpgradeStartedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectDeviceId,
cpqKvmTrapObjectFirmwareCondition
}
DESCRIPTION
"The console switch has started a Subsystem Upgrade.
This can be a download from the DModule to the Main Board, or
a interface adapter or other subsystem download from the Main Board...
Information about the subsystem being updated is stored in the
cpqKvmTrapObjectFirmwareCondition object.
"
--#TYPE "Status Trap"
--#SUMMARY "Subsystem Upgrade started. Device ID: %s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "SYSTEM AND ENVIRONMENTAL"
--#TIMEINDEX 99
::= 24
cpqKvmSubsystemRestartTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectDeviceId,
cpqKvmTrapObjectFirmwareCondition
}
DESCRIPTION
"The console switch has completed a download and is restarting the
subsystem specified in the cpqKvmTrapObjectFirmwareCondition object.
"
--#TYPE "Status Trap"
--#SUMMARY "Subsystem restarting. Device ID: %s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "SYSTEM AND ENVIRONMENTAL"
--#TIMEINDEX 99
::= 25
cpqKvmFirmwareCommunicationsTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectDeviceId,
cpqKvmTrapObjectFirmwareCondition
}
DESCRIPTION
"The console switch has detected communication problems in the system
configuration. This can be used to indicate install problems that
might result in perceived problems with the switch.
"
--#TYPE "Status Trap"
--#SUMMARY "Communication problems in the system configuration. Device ID: %s."
--#ARGUMENTS { 0 }
--#SEVERITY MAJOR
--#CATEGORY "SYSTEM AND ENVIRONMENTAL"
--#TIMEINDEX 99
::= 26
cpqKvmNVMemoryFailureTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectDeviceId,
cpqKvmTrapObjectFirmwareCondition
}
DESCRIPTION
"The console switch has detected a memory problem, the nature of which
has been described in the cpqKvmTrapObjectFirmwareCondition object.
"
--#TYPE "Status Trap"
--#SUMMARY "Memory problem. Device ID: %s"
--#ARGUMENTS { 0 }
--#SEVERITY CRITICAL
--#CATEGORY "SYSTEM AND ENVIRONMENTAL"
--#TIMEINDEX 99
::= 27
cpqKvmWatchdogResetTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectDeviceId,
cpqKvmTrapObjectFirmwareCondition
}
DESCRIPTION
"The console switch has detected a watchdog reset condition.
This indicates a catastrophic failure in the Firmware/Hardware
preventing normal operation of the console switch.
"
--#TYPE "Status Trap"
--#SUMMARY "Watchdog reset. Device ID: %s."
--#ARGUMENTS { 0 }
--#SEVERITY CRITICAL
--#CATEGORY "SYSTEM AND ENVIRONMENTAL"
--#TIMEINDEX 99
::= 28
cpqKvmDiagnosticConditionTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectDeviceId,
cpqKvmTrapObjectFirmwareCondition
}
DESCRIPTION
"The console switch has detected a special condition to be trapped
for diagnostics. The condition has been recorded is stored
in the cpqKvmTrapObjectFirmwareCondition object.
"
--#TYPE "Status Trap"
--#SUMMARY "Special condition was trapped. Device ID: %s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "SYSTEM AND ENVIRONMENTAL"
--#TIMEINDEX 99
::= 29
cpqKvmSubsystemUpgradeFailureTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectDeviceId,
cpqKvmTrapObjectFirmwareCondition
}
DESCRIPTION
"The console switch has detected a special condition resulting in a
failed subsystem update. The condition has been recorded is stored
in the cpqKvmTrapObjectFirmwareCondition object.
"
--#TYPE "Status Trap"
--#SUMMARY "Subsystem upgrade failed. Device ID: %s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#CATEGORY "SYSTEM AND ENVIRONMENTAL"
--#TIMEINDEX 99
::= 30
cpqKvmWarningConditionTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectDeviceId,
cpqKvmTrapObjectAlarmCondition,
cpqKvmTrapObjectAlarmDescription
}
DESCRIPTION
"The console switch has detected a special condition to be trapped
for warning the operator. The condition indicates some parameter
outside of normal operation, such as over temperature range.
These are not expected to result in unusual behavior, but may
be precursor to a subsequent urgent condition.
"
--#TYPE "Status Trap"
--#SUMMARY "Warning condition. Device ID: %s. Alarm condition: %d. Alarm description: %s."
--#ARGUMENTS { 0, 1, 2 }
--#SEVERITY MINOR
--#CATEGORY "SYSTEM AND ENVIRONMENTAL"
--#TIMEINDEX 99
::= 31
cpqKvmUrgentConditionTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectDeviceId,
cpqKvmTrapObjectAlarmCondition,
cpqKvmTrapObjectAlarmDescription
}
DESCRIPTION
"The console switch has detected a special condition to be trapped
for alerting the operator. The condition indicates some parameter
outside of normal operation that is expected to result in
unpredictable system behavior.
"
--#TYPE "Status Trap"
--#SUMMARY "Urgent condition. Device ID: %s. Alarm condition: %d. Alarm description: %s."
--#ARGUMENTS { 0, 1, 2 }
--#SEVERITY CRITICAL
--#CATEGORY "SYSTEM AND ENVIRONMENTAL"
--#TIMEINDEX 99
::= 32
cpqKvmUserLockedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectIPAddress,
cpqKvmTrapObjectTargetUserName,
cpqKvmTrapObjectLockReason
}
DESCRIPTION
"A user account has been locked.
The IP address of the client is contained in cpqKvmTrapObjectIPAddress.
The name of the user who was locked is contained
in cpqKvmTrapObjectTargetUserName.
The reason for which the user account has been locked is contained
in cpqKvmTrapObjectLockReason.
"
--#TYPE "User Account Lockout"
--#SUMMARY "User account has been locked. Client IP Address: %s. Locked user: %s. Reason: %s"
--#ARGUMENTS { 0, 1, 2 }
--#SEVERITY MINOR
--#CATEGORY "REMOTE MONITORING AND MANAGEMENT"
--#TIMEINDEX 99
::= 33
cpqKvmUserUnlockedTrap TRAP-TYPE
ENTERPRISE cpqKvmProducts
VARIABLES {
cpqKvmTrapObjectIPAddress,
cpqKvmTrapObjectUserName,
cpqKvmTrapObjectTargetUserName,
cpqKvmTrapObjectUnlockReason
}
DESCRIPTION
"A user account has been unlocked.
The IP address of the client that originated the unlock request
is contained in cpqKvmTrapObjectIPAddress. When the user
account is unlocked by an appliance reboot or by the expiration
of the lockout period (as specified in the
cpqKvmTrapObjectUnlockReason object), the IP address
will be blank.
The name of the user who unlocked the user is contained
in cpqKvmTrapObjectUserName. When the user account is unlocked
by an appliance reboot or by the expiration of the lockout period
(as specified in the cpqKvmTrapObjectUnlockReason object), the
name of the user will be blank.
The name of the user who was unlocked is contained
in cpqKvmTrapObjectTargetUserName.
The reason for which the user account has been unlocked is contained
in cpqKvmTrapObjectUnlockReason.
"
--#TYPE "User Account Unlocked"
--#SUMMARY "User account has been unlocked. Client IP Address: %s. Command issued by user: %s. Unlocked user: %s. Reason: %s"
--#ARGUMENTS { 0, 1, 2, 3 }
--#SEVERITY MINOR
--#CATEGORY "REMOTE MONITORING AND MANAGEMENT"
--#TIMEINDEX 99
::= 34
END