mirror of
https://github.com/hsnodgrass/snmp_mib_archive.git
synced 2025-04-18 00:13:02 +00:00
305 lines
9.9 KiB
Plaintext
305 lines
9.9 KiB
Plaintext
-- *****************************************************************
|
|
-- Cisco LRE CPE MIB
|
|
--
|
|
-- March 2003, Sudhi Nadaanayakinahalu
|
|
--
|
|
-- Copyright (c) 2003 by Cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
|
|
CISCO-LRE-CPE-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE
|
|
FROM SNMPv2-SMI
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
InterfaceIndex, ifIndex
|
|
FROM IF-MIB
|
|
dot1dTpFdbAddress
|
|
FROM BRIDGE-MIB
|
|
ciscoMgmt
|
|
FROM CISCO-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF;
|
|
|
|
ciscoLreCpeMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200303120000Z" -- March 12, 2003
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
" Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: switchsnmp@cisco.com"
|
|
DESCRIPTION
|
|
"The MIB module for the Cisco Long Reach Ethernet
|
|
Customer Premise Equipment device information.
|
|
|
|
*** ABBREVIATIONS, ACRONYMS, AND SYMBOLS ***
|
|
|
|
CPE - Customer Premise Equipment
|
|
DSL - Digital Subscriber Loop
|
|
VDSL - Very High Speed DSL
|
|
LRE - Long Reach Ethernet
|
|
"
|
|
|
|
REVISION "200303120000Z" -- March 12, 2003
|
|
DESCRIPTION
|
|
"Initial version of the Cisco Long Reach Ethernet CPE MIB"
|
|
::= { ciscoMgmt 340}
|
|
|
|
|
|
ciscoLreCpeMIBObjects OBJECT IDENTIFIER ::= { ciscoLreCpeMIB 1 }
|
|
|
|
-- MIB groups
|
|
|
|
clreCpeDot1dTp OBJECT IDENTIFIER ::= { ciscoLreCpeMIBObjects 1 }
|
|
clreCpePort OBJECT IDENTIFIER ::= { ciscoLreCpeMIBObjects 2 }
|
|
|
|
-- The clreCpeDot1dTp group
|
|
|
|
-- The clreCpeDot1dTp group should be implemented in those Long Reach
|
|
-- Ethernet switches that support CPE devices with transparent
|
|
-- learning bridges
|
|
|
|
-- The forwarding database for transparent bridges on CPE devices.
|
|
|
|
clreCpeDot1dTpFdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ClreCpeDot1dTpFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that supplements the information from the BRIDGE-MIB.
|
|
The BRIDGE-MIB tracks the MAC address to switch interface
|
|
mapping in the dot1dTpFdbTable. On the long reach ethernet
|
|
switch, CPE devices connect to the switch interfaces. Each
|
|
CPE device has one or more ports. This table maps a
|
|
MAC address on the switch to an interface associated with a
|
|
CPE port."
|
|
::= { clreCpeDot1dTp 1 }
|
|
|
|
clreCpeDot1dTpFdbEntry OBJECT-TYPE
|
|
SYNTAX ClreCpeDot1dTpFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry that supplements the information in the
|
|
dot1dTpFdbTable table from the BRIDGE-MIB."
|
|
INDEX { dot1dTpFdbAddress }
|
|
::= { clreCpeDot1dTpFdbTable 1 }
|
|
|
|
ClreCpeDot1dTpFdbEntry ::=
|
|
SEQUENCE {
|
|
clreCpeDot1dBasePortIfIndex
|
|
InterfaceIndex
|
|
}
|
|
|
|
clreCpeDot1dBasePortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the instance of the ifIndex object,
|
|
define in MIB-II, for the interface corresponding
|
|
to this CPE port. The Forwarding database on the
|
|
switch tracks a MAC address and its associated
|
|
switch interface in the dot1dTpFdbTable table.
|
|
This object adds information about which port
|
|
on the CPE the MAC address was learnt on."
|
|
::= { clreCpeDot1dTpFdbEntry 1 }
|
|
|
|
-- The clreCpePort group
|
|
|
|
-- The clreCpePort group should be implemented on those Long Reach
|
|
-- Ethernet switches that support CPE devices with Fast Ethernet ports
|
|
|
|
-- The CPE port table
|
|
|
|
clreCpePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ClreCpePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of LRE CPE port entries. The number of entries is
|
|
determined by the number of Long Reach Ethernet interfaces
|
|
(to which the CPE attaches) on the switch and the number
|
|
of Fast Ethernet ports each CPE supports."
|
|
::= { clreCpePort 1 }
|
|
|
|
clreCpePortEntry OBJECT-TYPE
|
|
SYNTAX ClreCpePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry containing information for a particular CPE
|
|
Fast Ethernet port. The entries are created as new
|
|
CPE devices are discovered. A new CPE device is discovered
|
|
when the LRE link between that CPE device and the LRE switch
|
|
becomes operational. These entries are only valid for
|
|
ifIndexes of ifType ethernetCsmacd(6)."
|
|
INDEX { ifIndex }
|
|
::= { clreCpePortTable 1 }
|
|
|
|
ClreCpePortEntry ::= SEQUENCE {
|
|
clreCpePortAdminStatus INTEGER,
|
|
clreCpePortAdminSpeed INTEGER,
|
|
clreCpePortAdminDuplex INTEGER,
|
|
clreCpePortAdminProtected TruthValue,
|
|
clreCpePortOperProtected TruthValue
|
|
}
|
|
|
|
clreCpePortAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- ready to pass packets
|
|
down(2),
|
|
testing(3) -- in test mode
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The desired state of the CPE port. The testing(3)
|
|
state indicates that no operational packets can be
|
|
passed. When a managed system initializes, all
|
|
CPE ports start with clreCpePortAdminStatus in
|
|
the down(2) state. As a result of either explicit
|
|
management action or per configuration information
|
|
retained by the managed system, clreCpePortAdminStatus
|
|
is then changed to either the up(1) or testing(3) states
|
|
(or remains in the down(2) state)."
|
|
::= { clreCpePortEntry 1 }
|
|
|
|
clreCpePortAdminSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
autoDetect(1), -- auto-negotiate for speed
|
|
s10000000(10000000), -- 10 Mbps
|
|
s100000000(100000000) -- 100 Mbps
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the speed of this CPE Fast Ethernet
|
|
port. When set to autoDetect(1), the CPE port negotiates
|
|
with its peer for the optimum speed, either
|
|
s10000000(10000000) or s100000000(100000000).
|
|
If the peer does not support the autoDetect(1)
|
|
capability, the CPE port speed defaults to
|
|
s10000000(10000000)."
|
|
DEFVAL { autoDetect }
|
|
::= { clreCpePortEntry 2 }
|
|
|
|
clreCpePortAdminDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
autoDetect(1), -- auto-negotiate for duplex
|
|
fullDuplex(2), -- Force full duplex
|
|
halfDuplex(3) -- Force half duplex
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the duplex of this CPE Fast Ethernet
|
|
port. When set to autoDetect(1), the CPE port negotiates
|
|
with its peer for the optimum duplex setting, either
|
|
fullDuplex(2) or halfDuplex(3). If the peer does not support
|
|
the autoDetect(1) capability, this CPE port's duplex
|
|
defaults to halfDuplex(3)."
|
|
DEFVAL { autoDetect }
|
|
::= { clreCpePortEntry 3 }
|
|
|
|
clreCpePortAdminProtected OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures a CPE Fast Ethernet port as a
|
|
protected port when its value is set to true. Data
|
|
traffic is disallowed between two CPE ports configured
|
|
as protected ports. When the value of this object is set
|
|
to false, the protected port property of this CPE port
|
|
is removed. The value of this object can be set to true
|
|
only on those CPE ports that support the protected port
|
|
function.Note that the value of this object represents
|
|
the desired state of the port. The actual state of the
|
|
port may have a different value."
|
|
DEFVAL { false }
|
|
::= { clreCpePortEntry 4 }
|
|
|
|
clreCpePortOperProtected OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value represented by this object is the actual
|
|
protected port state of the CPE port. The object value
|
|
is true when this CPE port is configured as a protected
|
|
port. Data packets are not forwarded between two CPE
|
|
ports configured as protected ports."
|
|
::= { clreCpePortEntry 5 }
|
|
|
|
--
|
|
-- Notifications
|
|
--
|
|
|
|
clreCpeMIBNotifications OBJECT IDENTIFIER ::= { ciscoLreCpeMIB 0 }
|
|
clreCpeMIBNotificationsPrefix
|
|
OBJECT IDENTIFIER ::= { clreCpeMIBNotifications 0 }
|
|
|
|
--
|
|
-- Conformance
|
|
--
|
|
|
|
clreCpeMIBConformance
|
|
OBJECT IDENTIFIER ::= { ciscoLreCpeMIB 2 }
|
|
clreCpeMIBCompliances
|
|
OBJECT IDENTIFIER ::= { clreCpeMIBConformance 1 }
|
|
clreCpeMIBGroups
|
|
OBJECT IDENTIFIER ::= { clreCpeMIBConformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
clreCpeMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for switches supporting the
|
|
LRE CPE devices."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
clreCpePortGroup
|
|
}
|
|
GROUP clreCpeDot1dTpGroup
|
|
DESCRIPTION
|
|
"This group is optional."
|
|
::= { clreCpeMIBCompliances 1 }
|
|
|
|
-- Units of conformance
|
|
|
|
clreCpeDot1dTpGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clreCpeDot1dBasePortIfIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of MIB objects used to monitor the
|
|
transparent learning bridge on the LRE CPE."
|
|
::= { clreCpeMIBGroups 1 }
|
|
|
|
clreCpePortGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clreCpePortAdminStatus,
|
|
clreCpePortAdminSpeed,
|
|
clreCpePortAdminDuplex,
|
|
clreCpePortAdminProtected,
|
|
clreCpePortOperProtected
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of MIB objects used to manage and monitor
|
|
LRE CPE Fast Ethernet ports."
|
|
::= { clreCpeMIBGroups 2 }
|
|
|
|
END
|