MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-IETF-VPLS-GENERIC-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

727 lines
23 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-IETF-VPLS-GENERIC-MIB.my
--
-- November 2006, Mark Tooker
--
-- Copyright (c) 2006-2009 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-IETF-VPLS-GENERIC-MIB DEFINITIONS ::= BEGIN
IMPORTS
NOTIFICATION-TYPE,
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
Counter32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TruthValue,
RowStatus,
StorageType
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
VPNIdOrZero
FROM VPN-TC-STD-MIB
CpwVcIndexType
FROM CISCO-IETF-PW-TC-MIB
ciscoExperiment
FROM CISCO-SMI;
cvplsGenericMIB MODULE-IDENTITY
LAST-UPDATED "200710221200Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal:
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-l2vpn@cisco.com"
DESCRIPTION
"This MIB module contains generic managed object definitions
for Virtual Private LAN Services as in [L2VPN-VPLS-LDP] and
[L2VPN-VPLS-BGP]
This MIB module enables the use of any underlying Pseudo Wire
network.
This MIB is based on the following IETF document.
http://www.ietf.org/internet-drafts/draft-ietf-l2vpn-vpls-mib-00.txt"
REVISION "200710221200Z"
DESCRIPTION
"Initial version of this MIB"
::= { ciscoExperiment 138 }
-- Top-level components of this MIB.
--
-- Notifications
cvplsNotifications OBJECT IDENTIFIER
::= { cvplsGenericMIB 0 }
-- Tables, Scalars
cvplsObjects OBJECT IDENTIFIER
::= { cvplsGenericMIB 1 }
-- Conformance
cvplsConformance OBJECT IDENTIFIER
::= { cvplsGenericMIB 2 }
-- PW Virtual Connection Table
cvplsConfigIndexNext OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to be used
for cvplsConfigIndex when creating entries in the
cvplsConfigTable. The value 0 indicates that no
unassigned entries are available. To obtain the
value of cvplsConfigIndex for a new entry in the
cvplsConfigTable, the manager issues a management
protocol retrieval operation to obtain the current
value of cvplsConfigIndex. After each retrieval
operation, the agent should modify the value to
reflect the next unassigned index. After a manager
retrieves a value the agent will determine through
its local policy when this index value will be made
available for reuse."
::= { cvplsObjects 1 }
cvplsConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvplsConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies information for configuring
and monitoring Virtual Private Lan Services(VPLS)."
::= { cvplsObjects 2 }
cvplsConfigEntry OBJECT-TYPE
SYNTAX CvplsConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents a Virtual Private Lan
Service(VPLS) in a packet network. It is indexed by
cvplsConfigIndex, which uniquely identifies a single VPLS.
A row is created by the operator or by the agent if a
VPLS service is created by non-SNMP application or
due to autodiscovery process.
None of the read-create objects values can be
changed when cvplsConfigRowStatus is in the active(1)
state. Changes are allowed when the cvplsConfigRowStatus
is in notInService(2) or notReady(3) states only.
If the operator needs to change one of the values
for an active row the cvplsConfigRowStatus should be
first changed to notInService(2), the objects may
be changed now, and later to active(1) in order to
re-initiate the signaling process with the new
values in effect."
INDEX { cvplsConfigIndex }
::= { cvplsConfigTable 1 }
CvplsConfigEntry ::= SEQUENCE {
cvplsConfigIndex Unsigned32,
cvplsConfigName SnmpAdminString,
cvplsConfigDescr SnmpAdminString,
cvplsConfigAdminStatus INTEGER,
cvplsConfigMacLearning TruthValue,
cvplsConfigDiscardUnknownDest TruthValue,
cvplsConfigMacAging TruthValue,
cvplsConfigFwdFullHighWatermark Unsigned32,
cvplsConfigFwdFullLowWatermark Unsigned32,
cvplsConfigRowStatus RowStatus,
cvplsConfigMtu Unsigned32,
cvplsConfigVpnId VPNIdOrZero,
cvplsConfigServiceType INTEGER,
cvplsConfigStorageType StorageType
}
cvplsConfigIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique index for the conceptual row identifying
a VPLS service."
::= { cvplsConfigEntry 1 }
cvplsConfigName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A textual name of the VPLS.
If there is no local name, or this object is
otherwise not applicable, then this object MUST
contain a zero-length octet string."
DEFVAL { "" }
::= { cvplsConfigEntry 2 }
cvplsConfigDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A textual string containing information about the
VPLS service. If there is no information for this VPLS
service, then this object MUST contain a zero-length
octet string."
DEFVAL { "" }
::= { cvplsConfigEntry 3 }
cvplsConfigAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3) -- in some test mode
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired administrative state of the VPLS
service. If the administrative status of the
Vpls service is changed to enable then this
service is able to utilize the pseudo wire to
perform the tasks of a VPLS service.
The testing(3) state indicates that no operational
packets can be passed."
DEFVAL { down }
::= { cvplsConfigEntry 4 }
cvplsConfigMacLearning OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies if MAC Learning is enabled
in this service. If this object is true then Mac
Learning is enabled. If false, then Mac Learning is
disabled."
DEFVAL { true }
::= { cvplsConfigEntry 6 }
cvplsConfigDiscardUnknownDest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the value of this object is 'true', then frames
received with an unknown destination MAC are discarded
in this VPLS. If 'false', then the packets are
processed."
DEFVAL { false }
::= { cvplsConfigEntry 7 }
cvplsConfigMacAging OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the value of this object is 'true'
then the MAC aging process is enabled in
this VPLS. If 'false', then the MAC aging process
is disabled"
DEFVAL { true }
::= { cvplsConfigEntry 8 }
cvplsConfigFwdFullHighWatermark OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percentage"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the utilization of the
forwarding database for this VPLS instance at
which the cvplsFwdFullAlarmRaised notification
will be sent."
DEFVAL { 95 }
::= { cvplsConfigEntry 10 }
cvplsConfigFwdFullLowWatermark OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percentage"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the utilization of the
forwarding database for this VPLS instance
at which the cvplsFwdFullAlarmCleared
notification will be sent."
DEFVAL { 90 }
::= { cvplsConfigEntry 11 }
cvplsConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For creating, modifying, and deleting this row.
None of the read-create objects in the
conceptual rows may be changed when this
object is in the active(1) state."
::= { cvplsConfigEntry 12 }
cvplsConfigMtu OBJECT-TYPE
SYNTAX Unsigned32 (64..1518)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object specifies the MTU of this
vpls instance."
DEFVAL { 1518 }
::= { cvplsConfigEntry 13 }
cvplsConfigVpnId OBJECT-TYPE
SYNTAX VPNIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the IEEE 802-1990
VPN ID of the associated VPLS service."
::= { cvplsConfigEntry 14 }
cvplsConfigServiceType OBJECT-TYPE
SYNTAX INTEGER {
vlan(1),
ethernet(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object specifies the type of
service emulated by this vpls instance."
DEFVAL { vlan }
::= { cvplsConfigEntry 15 }
cvplsConfigStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the storage type for this row."
DEFVAL { volatile }
::= { cvplsConfigEntry 16 }
-- VPLS Status table
cvplsStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvplsStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information for monitoring
Virtual Private Lan Services(VPLS)."
::= { cvplsObjects 3 }
cvplsStatusEntry OBJECT-TYPE
SYNTAX CvplsStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents a Virtual Private Lan
Service(VPLS) in a packet network. It is indexed by
cvplsConfigIndex, which uniquely identifies a single VPLS.
A row in this table is automatically created by the agent
when a VPLS service is configured."
INDEX { cvplsConfigIndex }
::= { cvplsStatusTable 1 }
CvplsStatusEntry ::= SEQUENCE {
cvplsStatusOperStatus INTEGER,
cvplsStatusPeerCount Counter32
}
cvplsStatusOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(0),
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of this VPLS Service."
::= { cvplsStatusEntry 1 }
cvplsStatusPeerCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of peers
present in this vpls instance."
::= { cvplsStatusEntry 2 }
-- VPLS PW Binding Table
cvplsPwBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvplsPwBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides an association between a
VPLS service and the corresponding Pseudo
Wires. A service can have more than one Pseudo
Wire association. Pseudo Wires are defined in
the pwTable"
::= { cvplsObjects 4 }
cvplsPwBindEntry OBJECT-TYPE
SYNTAX CvplsPwBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row represents an association between a
VPLS instance and one or more Pseudo Wires
defined in the pwTable. Each index is unique
in describing an entry in this table. However
both indexes are required to define the one
to many association of service to
pseudowire."
INDEX {
cvplsConfigIndex,
cvplsPwBindIndex
}
::= { cvplsPwBindTable 1 }
CvplsPwBindEntry ::= SEQUENCE {
cvplsPwBindIndex CpwVcIndexType,
cvplsPwBindConfigType INTEGER,
cvplsPwBindType INTEGER,
cvplsPwBindRowStatus RowStatus,
cvplsPwBindStorageType StorageType
}
cvplsPwBindIndex OBJECT-TYPE
SYNTAX CpwVcIndexType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Secondary Index for the conceptual row identifying
a pseudowire within the PwEntry which MUST
match an entry from the PW-STD-MIB's PwTable
which represents an already-provisioned
pseudowire that is then associated with this
VPLS instance."
::= { cvplsPwBindEntry 1 }
cvplsPwBindConfigType OBJECT-TYPE
SYNTAX INTEGER {
manual(1),
autodiscovery(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object indicates
whether the Pseudo Wire binding was created
manually or via autodiscovery.
The value of this object must be
specified when the row is created and cannot
be changed while the row status is active(1)"
::= { cvplsPwBindEntry 2 }
cvplsPwBindType OBJECT-TYPE
SYNTAX INTEGER {
mesh(1),
spoke(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object indicates
whether the Pseudo Wire binding is of
type mesh or spoke.
The value of this object must be
specified when the row is created and cannot
be changed while the row status is active(1)"
::= { cvplsPwBindEntry 3 }
cvplsPwBindRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For creating, modifying, and deleting this row.
None of the read-create objects in the
conceptual rows may be changed when this
object is in the active(1) state"
::= { cvplsPwBindEntry 4 }
cvplsPwBindStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the storage type for this row."
DEFVAL { volatile }
::= { cvplsPwBindEntry 5 }
cvplsStatusNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is set to true(1), then it enables
the emission of cvplsStatusChanged
notification; otherwise this notification is not
emitted."
REFERENCE
"See also [RFC3413] for explanation that
notifications are under the ultimate control of the
MIB module in this document."
DEFVAL { false }
::= { cvplsObjects 5 }
cvplsNotificationMaxRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the maximum number of
notifications issued per second. If events occur
more rapidly, the implementation may simply fail to
emit these notifications during that period, or may
queue them until an appropriate time. A value of 0
means no throttling is applied and events may be
notified at the rate at which they occur."
DEFVAL { 0 }
::= { cvplsObjects 6 }
-- VPLS Service Notifications
cvplsStatusChanged NOTIFICATION-TYPE
OBJECTS {
cvplsConfigVpnId,
cvplsConfigAdminStatus,
cvplsStatusOperStatus
}
STATUS current
DESCRIPTION
"The cvplsStatusChanged notification is generated
when there is a change in the administrative or
operating status of a VPLS service."
::= { cvplsNotifications 1 }
cvplsFwdFullAlarmRaised NOTIFICATION-TYPE
OBJECTS {
cvplsConfigVpnId,
cvplsConfigFwdFullHighWatermark,
cvplsConfigFwdFullLowWatermark
}
STATUS current
DESCRIPTION
"The cvplsFwdFullAlarmRaised notification is
generated when the utilization of the Forwarding
database is above the value specified by
cvplsConfigFwdFullHighWatermark."
::= { cvplsNotifications 2 }
cvplsFwdFullAlarmCleared NOTIFICATION-TYPE
OBJECTS {
cvplsConfigVpnId,
cvplsConfigFwdFullHighWatermark,
cvplsConfigFwdFullLowWatermark
}
STATUS current
DESCRIPTION
"The cvplsFwdFullAlarmCleared notification is
generated when the utilization of the Forwarding
database is below the value specified by
cvplsConfigFwdFullLowWatermark."
::= { cvplsNotifications 3 }
-- Compliance requirement for read-only implementations.
cvplsCompliances OBJECT IDENTIFIER
::= { cvplsConformance 1 }
cvplsModuleFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance requirement for implementations that
provide full support for CISCO-IETF-VPLS-GENERIC-MIB.
Such devices can then be monitored and configured using
this MIB module."
MODULE -- this module
MANDATORY-GROUPS {
cvplsGroup,
cvplsPwBindGroup,
cvplsNotificationGroup
}
::= { cvplsCompliances 1 }
cvplsModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance requirement for implementations that only
provide read-only support for CISCO-IETF-VPLS-GENERIC-MIB.
Such devices can then be monitored but cannot be
configured using this MIB modules."
MODULE -- this module
MANDATORY-GROUPS {
cvplsGroup,
cvplsPwBindGroup,
cvplsNotificationGroup
}
OBJECT cvplsConfigName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cvplsConfigDescr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cvplsConfigAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cvplsConfigMacLearning
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cvplsConfigDiscardUnknownDest
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cvplsConfigMacAging
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cvplsConfigFwdFullHighWatermark
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cvplsConfigFwdFullLowWatermark
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cvplsConfigRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cvplsConfigMtu
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cvplsConfigServiceType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cvplsPwBindConfigType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cvplsPwBindType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cvplsPwBindRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { cvplsCompliances 2 }
-- Units of conformance.
cvplsGroups OBJECT IDENTIFIER
::= { cvplsConformance 2 }
cvplsGroup OBJECT-GROUP
OBJECTS {
cvplsConfigName,
cvplsConfigDescr,
cvplsConfigAdminStatus,
cvplsConfigMacLearning,
cvplsConfigDiscardUnknownDest,
cvplsConfigMacAging,
cvplsConfigVpnId,
cvplsConfigFwdFullHighWatermark,
cvplsConfigFwdFullLowWatermark,
cvplsConfigRowStatus,
cvplsConfigIndexNext,
cvplsConfigMtu,
cvplsConfigServiceType,
cvplsConfigStorageType,
cvplsStatusOperStatus,
cvplsStatusPeerCount,
cvplsStatusNotifEnable,
cvplsNotificationMaxRate
}
STATUS current
DESCRIPTION
"The group of objects supporting
management of L2VPN VPLS services"
::= { cvplsGroups 1 }
cvplsPwBindGroup OBJECT-GROUP
OBJECTS {
cvplsPwBindConfigType,
cvplsPwBindType,
cvplsPwBindRowStatus,
cvplsPwBindStorageType
}
STATUS current
DESCRIPTION
"The group of objects supporting
management of
Pseudo Wire (PW) Binding to VPLS."
::= { cvplsGroups 2 }
cvplsNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cvplsStatusChanged,
cvplsFwdFullAlarmRaised,
cvplsFwdFullAlarmCleared
}
STATUS current
DESCRIPTION
"The group of notifications supporting
the Notifications generated for
VPLS Services"
::= { cvplsGroups 3 }
END
Reference in New Issue View Git Blame Copy Permalink