#-MIBFILE: cpqide.mib

CPQIDE-MIB DEFINITIONS ::= BEGIN


compaq OBJECT IDENTIFIER ::= { enterprises 232 }
DisplayString ::=
	OCTET STRING

PhysAddress ::=
	OCTET STRING

mib-2 OBJECT IDENTIFIER ::= { mgmt 1 }
system OBJECT IDENTIFIER ::= { mib-2 1 }
sysName OBJECT IDENTIFIER ::= { system 5 }
cpqHostOs OBJECT IDENTIFIER ::= { compaq 11 }
cpqHoComponent OBJECT IDENTIFIER ::= { cpqHostOs 2 }
cpqHoTrapInfo OBJECT IDENTIFIER ::= { cpqHoComponent 11 }
cpqHoTrapFlags OBJECT IDENTIFIER ::= { cpqHoTrapInfo 1 }
cpqIde OBJECT IDENTIFIER ::= { compaq 14 }

cpqIdeMibRev OBJECT IDENTIFIER ::= { cpqIde 1 }

cpqIdeComponent OBJECT IDENTIFIER ::= { cpqIde 2 }

cpqIdeInterface OBJECT IDENTIFIER ::= { cpqIdeComponent 1 }

cpqIdeIdent OBJECT IDENTIFIER ::= { cpqIdeComponent 2 }

cpqIdeController OBJECT IDENTIFIER ::= { cpqIdeComponent 3 }

cpqIdeAtaDisk OBJECT IDENTIFIER ::= { cpqIdeComponent 4 }

cpqIdeAtapiDevice OBJECT IDENTIFIER ::= { cpqIdeComponent 5 }

cpqIdeLogicalDrive OBJECT IDENTIFIER ::= { cpqIdeComponent 6 }

cpqIdeOsCommon OBJECT IDENTIFIER ::= { cpqIdeInterface 4 }

cpqIdeMibRevMajor OBJECT-TYPE
	SYNTAX INTEGER (1..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Major Revision level.

A change in the major revision level represents a major change
in the architecture of the MIB.  A change in the major revision
level may indicate a significant change in the information
supported and/or the meaning of the supported information,
correct interpretation of data may require a MIB document with
the same major revision level."
	::= { cpqIdeMibRev 1 }


cpqIdeMibRevMinor OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Minor Revision level.

A change in the minor revision level may represent some minor
additional support; no changes to any pre-existing information
has occurred."
	::= { cpqIdeMibRev 2 }


cpqIdeMibCondition OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	degraded(3),
	failed(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The overall condition.

This object represents the overall status of the Ide system
represented by this MIB."
	::= { cpqIdeMibRev 3 }


cpqIdeOsCommonPollFreq OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Insight Agent's polling frequency.

The frequency, in seconds, at which the Insight Agent requests
information from the device driver.  A frequency of zero
indicates that the Insight Agent retrieves the information upon
request of a management station, it does not poll the device
driver at a specific interval.

If the poll frequency is zero (0) all attempts to write to this
object will fail.  If the poll frequency is non-zero,
setting this value will change the polling frequency of the
Insight Agent.  Setting the poll frequency to zero will always
fail, an agent may also choose to fail any request to change
the poll frequency to a value that would severely impact system
performance."
	::= { cpqIdeOsCommon 1 }


cpqIdeOsCommonModuleTable OBJECT-TYPE
	SYNTAX SEQUENCE OF CpqIdeOsCommonModuleEntry
	ACCESS read-only
	STATUS optional
	DESCRIPTION "A table of software modules that provide an interface to the
device this MIB describes."
	::= { cpqIdeOsCommon 2 }


cpqIdeOsCommonModuleEntry OBJECT-TYPE
	SYNTAX CpqIdeOsCommonModuleEntry
	ACCESS read-only
	STATUS optional
	DESCRIPTION "A description of a software modules that provide an interface
to the device this MIB describes."
	INDEX { cpqIdeOsCommonModuleIndex  }

	::= { cpqIdeOsCommonModuleTable 1 }

cpqIdeOsCommonModuleEntry ::=
	SEQUENCE {
		cpqIdeOsCommonModuleIndex INTEGER,
		cpqIdeOsCommonModuleName DisplayString,
		cpqIdeOsCommonModuleVersion DisplayString,
		cpqIdeOsCommonModuleDate OCTET STRING,
		cpqIdeOsCommonModulePurpose DisplayString
		}

cpqIdeOsCommonModuleIndex OBJECT-TYPE
	SYNTAX INTEGER (0..255)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "A unique index for this module description."
	::= { cpqIdeOsCommonModuleEntry 1 }


cpqIdeOsCommonModuleName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The module name."
	::= { cpqIdeOsCommonModuleEntry 2 }


cpqIdeOsCommonModuleVersion OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..5))
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The module version in XX.YY format.

Where XX is the major version number and YY is the minor version
number.  This field will be a null (size 0) string if the agent
cannot provide the module version."
	::= { cpqIdeOsCommonModuleEntry 3 }


cpqIdeOsCommonModuleDate OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(7))
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The module date.

field  octets  contents                  range
=====  ======  =======                  =====
1      1-2   year                      0..65536
2       3    month                     1..12
3       4    day                       1..31
4       5    hour                      0..23
5       6    minute                    0..59
6       7    second                    0..60
(use 60 for leap-second)


This field will be set to year = 0 if the agent cannot provide
the module date.  The hour, minute, and second field will be set
to zero (0) if they are not relevant."
	::= { cpqIdeOsCommonModuleEntry 4 }


cpqIdeOsCommonModulePurpose OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The purpose of the module described in this entry."
	::= { cpqIdeOsCommonModuleEntry 5 }


cpqIdeIdentTable OBJECT-TYPE
	SYNTAX SEQUENCE OF CpqIdeIdentEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Drive Identification Table."
	::= { cpqIdeIdent 1 }


cpqIdeIdentEntry OBJECT-TYPE
	SYNTAX CpqIdeIdentEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Identification Table Entry."
	INDEX { cpqIdeIdentIndex  }

	::= { cpqIdeIdentTable 1 }

cpqIdeIdentEntry ::=
	SEQUENCE {
		cpqIdeIdentIndex INTEGER,
		cpqIdeIdentModel DisplayString,
		cpqIdeIdentSerNum DisplayString,
		cpqIdeIdentFWVers DisplayString,
		cpqIdeIdentCondition INTEGER,
		cpqIdeIdentErrorNumber DisplayString,
		cpqIdeIdentType INTEGER,
		cpqIdeIdentTypeExtended INTEGER,
		cpqIdeIdentCondition2 INTEGER,
		cpqIdeIdentStatus INTEGER,
		cpqIdeIdentUltraAtaAvailability INTEGER
		}

cpqIdeIdentIndex OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index that uniquely specifies each device.  For disks,
this index value will match the value of the cpqSeFixedDiskIndex
in the Standard Equipment MIB (CPQSTDEQ.MIB) when the same
disk is being described.

Each possible index value indicates a specific drive as shown in
the table below:

Drive Index   IDE Controller   Drive Unit
===========   ==============   ==========
0            Primary           1
1            Primary           2
2            Secondary         1
3            Secondary         2

Any other index value would be implementation specific."
	::= { cpqIdeIdentEntry 1 }


cpqIdeIdentModel OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..41))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Drive Model.

The is the drive model name and can be used for identification
purposes."
	::= { cpqIdeIdentEntry 2 }


cpqIdeIdentSerNum OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..21))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Drive Serial Number.

The is the drive serial number and can be used for identification
purposes."
	::= { cpqIdeIdentEntry 3 }


cpqIdeIdentFWVers OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..9))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Firmware Version.

This is the version of the firmware on the IDE drive.
If the IDE drive firmware version is unavailable, then this
string will be of length zero (0)."
	::= { cpqIdeIdentEntry 4 }


cpqIdeIdentCondition OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	degraded(3),
	failed(4)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "IDE Drive Condition.

This is the overall condition of the IDE drive.
The following values are defined:

other(1)
The drive does not support drive condition monitoring.

ok(2)
The drive is operating normally.  No user action is required.

degraded(3)
The drive is degraded.  The drive may need to be replaced.

failed(4)
The drive has failed.  The drive should be replaced."
	::= { cpqIdeIdentEntry 5 }


cpqIdeIdentErrorNumber OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..32))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Error Number.

This value represents the error code associated with a failing
IDE drive."
	::= { cpqIdeIdentEntry 6 }


cpqIdeIdentType OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	disk(2),
	tape(3),
	printer(4),
	processor(5),
	wormDrive(6),
	cd-rom(7),
	scanner(8),
	optical(9),
	jukeBox(10),
	commDev(11)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Device Type.

This is the type of ATAPI device.  The following types are defined:

other(1)
The Insight agent does not recognize this type.
You may need to upgrade your software.

disk(2)
This is a direct-access device like a disk drive.

tape(3)
This is a sequential-access device like a tape drive.

printer(4)
This is a printer device.

processor(5)
This is a processor device.

worm(6)
This is a write-once, read-many times device.

cd-rom(7)
This is a CD or DVD device.

scanner(8)
This is a scanner device.

optical(9)
This is an optical memory device.

jukeBox(10)
This is a media changer device like a jukebox.

commDev(11)
This is a communications device like a LAN bridge."
	::= { cpqIdeIdentEntry 7 }


cpqIdeIdentTypeExtended OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	pdcd(2),
	removableDisk(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Extended Device Type.

This is additional information about the type of IDE device.
The following types are defined:

other(1)
This target does not have any extended type information.

pdcd(2)
This is a power-drive CD-ROM.

removableDisk(3)
This is a removable media disk device like a floppy drive."
	::= { cpqIdeIdentEntry 8 }


cpqIdeIdentCondition2 OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	degraded(3),
	failed(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Drive Condition.

This is the overall condition of the IDE drive.
The following values are defined:

other(1)
The drive does not support drive condition monitoring.

ok(2)
The drive is operating normally.
No user action is required.

degraded(3)
The drive is degraded.
See cpqIdeIdentStatus for the appropriate action.

failed(4)
The drive has failed.
See cpqIdeIdentStatus for the appropriate action."
	::= { cpqIdeIdentEntry 9 }


cpqIdeIdentStatus OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	preFailureDegraded(3),
	ultraAtaDegraded(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Drive Satus.

This indicates the status of the IDE drive.

The following values are defined:

other(1)
The drive does not support drive status monitoring.

ok(2)
The drive is operating normally.  No user action is required.

preFailureDegraded(3)
The drive has detected that at least one pre-failure SMART
attribute has gone out of range.  The drive may need to be
replaced.

ultraAtaDegraded(4)
The Ultra ATA Integrity Monitor has detected data transmission
errors between the hard drive and processor.  For best
performance, move Ultra ATA devices to the primary
controller and non Ultra ATA devices to the secondary
controller.  If errors still persist, consider replacing the
standard 40-conductor cable with and 80-conductor cable."
	::= { cpqIdeIdentEntry 10 }


cpqIdeIdentUltraAtaAvailability OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	noNotSupportedByDeviceAndController(2),
	noNotSupportedByDevice(3),
	noNotSupportedByController(4),
	noDisabledInSetup(5),
	yesEnabledInSetup(6)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This describes the availability of Ultra ATA
transfers between this device and the controller.

The following values are defined:

other(1)
The agents do not support reporting this variable or the
agent need to be upgraded.

noNotSupportedByDeviceAndController(2),
The device and the controller do not support Ultra ATA.

noNotSupportedByDevice(3),
The device does not support Ultra ATA but the controller
does support Ultra ATA.

noNotSupportedByController(4),
The controller does not support Ultra ATA but the device
does support Ultra ATA.

NoDisabledInSetup(5),
The device and the controller do support Ultra ATA but it
has been disabled in F10 Setup.

yesEnabledInSetup(6),
The device and the controller do support Ultra ATA and it
is enabled in F10 Setup."
	::= { cpqIdeIdentEntry 11 }


cpqIdeControllerTable OBJECT-TYPE
	SYNTAX SEQUENCE OF CpqIdeControllerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Controller Table."
	::= { cpqIdeController 1 }


cpqIdeControllerEntry OBJECT-TYPE
	SYNTAX CpqIdeControllerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Controller Table Entry."
	INDEX { cpqIdeControllerIndex  }

	::= { cpqIdeControllerTable 1 }

cpqIdeControllerEntry ::=
	SEQUENCE {
		cpqIdeControllerIndex INTEGER,
		cpqIdeControllerOverallCondition INTEGER,
		cpqIdeControllerModel DisplayString,
		cpqIdeControllerFwRev DisplayString,
		cpqIdeControllerSlot INTEGER,
		cpqIdeControllerStatus INTEGER,
		cpqIdeControllerCondition INTEGER,
		cpqIdeControllerSerialNumber DisplayString
		}

cpqIdeControllerIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index that uniquely identifies each controller."
	::= { cpqIdeControllerEntry 1 }


cpqIdeControllerOverallCondition OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	degraded(3),
	failed(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Controller Overall Condition.

This is the overall condition of the IDE controller and any
associated devices."
	::= { cpqIdeControllerEntry 2 }


cpqIdeControllerModel OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Controller Model.

The is the IDE controller model name."
	::= { cpqIdeControllerEntry 3 }


cpqIdeControllerFwRev OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Controller Firmware Revision.

The is the IDE controller firmware revision."
	::= { cpqIdeControllerEntry 4 }


cpqIdeControllerSlot OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Controller Slot.

This identifies the physical slot where the IDE controller
resides in the system.  For example, if this value is three,
the controller is located in slot three of your computer.
If the value cannot be determined or is not applicable, the
value is set to -1."
	::= { cpqIdeControllerEntry 5 }


cpqIdeControllerStatus OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	failed(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Channel Host Controller Status.

The host controller can be in one of the following states:

Other (1)
The agent is unable to determine the status of the controller.

OK (2)
Indicates that the controller is in normal operation mode.

Failed (3)
Indicates that the host controller has failed and should be
replaced."
	::= { cpqIdeControllerEntry 6 }


cpqIdeControllerCondition OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	degraded(3),
	failed(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Controller Condition.

This is the condition of the IDE controller."
	::= { cpqIdeControllerEntry 7 }


cpqIdeControllerSerialNumber OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Controller Serial Number.

The is the IDE controller serial number.  A NULL string
indicates that the serial number could not be determined or is
irrelevant."
	::= { cpqIdeControllerEntry 8 }


cpqIdeAtaDiskTable OBJECT-TYPE
	SYNTAX SEQUENCE OF CpqIdeAtaDiskEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE ATA Disk Table."
	::= { cpqIdeAtaDisk 1 }


cpqIdeAtaDiskEntry OBJECT-TYPE
	SYNTAX CpqIdeAtaDiskEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE ATA Disk Table Entry."
	INDEX { cpqIdeAtaDiskControllerIndex , cpqIdeAtaDiskIndex }

	::= { cpqIdeAtaDiskTable 1 }

cpqIdeAtaDiskEntry ::=
	SEQUENCE {
		cpqIdeAtaDiskControllerIndex INTEGER,
		cpqIdeAtaDiskIndex INTEGER,
		cpqIdeAtaDiskModel DisplayString,
		cpqIdeAtaDiskFwRev DisplayString,
		cpqIdeAtaDiskSerialNumber DisplayString,
		cpqIdeAtaDiskStatus INTEGER,
		cpqIdeAtaDiskCondition INTEGER,
		cpqIdeAtaDiskCapacity INTEGER,
		cpqIdeAtaDiskSmartEnabled INTEGER,
		cpqIdeAtaDiskTransferMode INTEGER,
		cpqIdeAtaDiskChannel INTEGER,
		cpqIdeAtaDiskNumber INTEGER,
		cpqIdeAtaDiskLogicalDriveMember INTEGER,
		cpqIdeAtaDiskIsSpare INTEGER,
		cpqIdeAtaDiskOsName DisplayString,
		cpqIdeAtaDiskType INTEGER,
		cpqIdeAtaDiskSataVersion INTEGER
		}

cpqIdeAtaDiskControllerIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index that uniquely identifies each controller."
	::= { cpqIdeAtaDiskEntry 1 }


cpqIdeAtaDiskIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index that uniquely identifies each disk."
	::= { cpqIdeAtaDiskEntry 2 }


cpqIdeAtaDiskModel OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ATA Disk Model.

The is the model name of the ATA disk."
	::= { cpqIdeAtaDiskEntry 3 }


cpqIdeAtaDiskFwRev OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ATA Disk Firmware Revision.

The is the firmware revision of the ATA disk."
	::= { cpqIdeAtaDiskEntry 4 }


cpqIdeAtaDiskSerialNumber OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ATA Disk Serial Number.

The is the serial number of the ATA disk."
	::= { cpqIdeAtaDiskEntry 5 }


cpqIdeAtaDiskStatus OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	smartError(3),
	failed(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ATA Disk Status.

This is the status of the ATA disk."
	::= { cpqIdeAtaDiskEntry 6 }


cpqIdeAtaDiskCondition OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	degraded(3),
	failed(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ATA Disk Condition.

This is the condition of the ATA disk."
	::= { cpqIdeAtaDiskEntry 7 }


cpqIdeAtaDiskCapacity OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ATA Disk Capacity.

This is the capacity of the ATA disk in megabytes."
	::= { cpqIdeAtaDiskEntry 8 }


cpqIdeAtaDiskSmartEnabled OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	true(2),
	false(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ATA Disk S.M.A.R.T Enabled?

other(1)
The agent cannot determine the state of S.M.A.R.T. monitoring
on this ATA disk.

true(2)
The ATA disk has S.M.A.R.T motitoring enabled.

false(3)
The ATA disk does not have S.M.A.R.T motitoring enabled."
	::= { cpqIdeAtaDiskEntry 9 }


cpqIdeAtaDiskTransferMode OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	pioMode0(2),
	pioMode1(3),
	pioMode2(4),
	pioMode3(5),
	pioMode4(6),
	dmaMode0(7),
	dmaMode1(8),
	dmaMode2(9),
	ultraDmaMode0(10),
	ultraDmaMode1(11),
	ultraDmaMode2(12),
	ultraDmaMode3(13),
	ultraDmaMode4(14),
	ultraDmaMode5(15)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ATA Disk Transfer Mode.

other(1)
The agent cannot determine the transfer mode on this ATA disk.

pioMode0(2)
The ATA disk is using PIO mode 0.

pioMode1(3)
The ATA disk is using PIO mode 1.

pioMode2(4)
The ATA disk is using PIO mode 2.

pioMode3(5)
The ATA disk is using PIO mode 3.

pioMode4(6)
The ATA disk is using PIO mode 4.

dmaMode0(7)
The ATA disk is using DMA mode 0.

dmaMode1(8)
The ATA disk is using DMA mode 1.

dmaMode2(9)
The ATA disk is using DMA mode 2.

ultraDmaMode0(10)
The ATA disk is using Ultra DMA mode 0.

ultraDmaMode1(11)
The ATA disk is using Ultra DMA mode 1.

ultraDmaMode2(12)
The ATA disk is using Ultra DMA mode 2.

ultraDmaMode3(13)
The ATA disk is using Ultra DMA mode 3.

ultraDmaMode4(14)
The ATA disk is using Ultra DMA mode 4.

ultraDmaMode5(15)
The ATA disk is using Ultra DMA mode 5."
	::= { cpqIdeAtaDiskEntry 10 }


cpqIdeAtaDiskChannel OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	channel0(2),
	channel1(3),
	serial(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ATA Disk Channel.

other(1)
The agent cannot determine the channel to which the ATA disk
is attached.

channel0(2)
The ATA disk is attached to the primary channel.

channel1(3)
The ATA disk is attached to the secondary channel.

serial(4)
The disk is attached to the serial interface and channel no
longer applies."
	::= { cpqIdeAtaDiskEntry 11 }


cpqIdeAtaDiskNumber OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	device0(2),
	device1(3),
	sataDevice0(4),
	sataDevice1(5),
	sataDevice2(6),
	sataDevice3(7),
	sataDevice4(8),
	sataDevice5(9),
	sataDevice6(10),
	sataDevice7(11),
	bay1(21),
	bay2(22),
	bay3(23),
	bay4(24),
	bay5(25),
	bay6(26),
	bay7(27),
	bay8(28)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ATA Disk Number.

other(1)
The agent cannot determine the number of the ATA disk.

device0(2)
The ATA disk is device 0 (master).

device1(3)
The ATA disk is device 1 (slave).

sataDevice0(4)
The SATA disk is device 0.

sataDevice1(5)
The SATA disk is device 1.

sataDevice2(6)
The SATA disk is device 2.

sataDevice3(7)
The SATA disk is device 3.

sataDevice4(8)
The SATA disk is device 4.

sataDevice5(9)
The SATA disk is device 5.

sataDevice6(10)
The SATA disk is device 6.

sataDevice7(11)
The SATA disk is device 7.

bay1(21)
The disk is in bay 1.

bay2(22)
The disk is in bay 2.

bay3(23)
The disk is in bay 3.

bay4(24)
The disk is in bay 4.

bay5(25)
The disk is in bay 5.

bay6(26)
The disk is in bay 6.

bay7(27)
The disk is in bay 7.

bay8(28)
The disk is in bay 8."
	::= { cpqIdeAtaDiskEntry 12 }


cpqIdeAtaDiskLogicalDriveMember OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	true(2),
	false(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Logical Drive Membership?

other(1)
The agent cannot determine if the ATA disk is part of a
logical drive.

true(2)
The ATA disk is part of a logical drive.

false(3)
The ATA disk is not part of a logical drive."
	::= { cpqIdeAtaDiskEntry 13 }


cpqIdeAtaDiskIsSpare OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	true(2),
	false(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ATA Disk Spare?

other(1)
The agent cannot determine if the ATA disk is a spare.

true(2)
The ATA disk is a spare disk.

false(3)
The ATA disk is not a spare disk."
	::= { cpqIdeAtaDiskEntry 14 }


cpqIdeAtaDiskOsName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ATA Disk OS Name.

The OS name for this ATA disk.  This field will be a null
(size 0) string if the agent does not support OS name or if the
ATA disk is part of a logical drive."
	::= { cpqIdeAtaDiskEntry 15 }


cpqIdeAtaDiskType OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ata(2),
	sata(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ATA Disk Type

other(1)
The agent cannot determine the disk type.

ata(2)
The disk type is parallel ATA.

sata(3)
The disk type is Serial ATA."
	::= { cpqIdeAtaDiskEntry 16 }


cpqIdeAtaDiskSataVersion OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	sataOne(2),
	sataTwo(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Physical Drive SATA Version.

The following values are defined:

other(1)
The agent is unable to determine the SATA version for this
disk or it is not a SATA disk.

sataOne(2)
The disk is SATA version one.

sataTwo(3)
The disk is SATA version two."
	::= { cpqIdeAtaDiskEntry 17 }


cpqIdeAtapiDeviceTable OBJECT-TYPE
	SYNTAX SEQUENCE OF CpqIdeAtapiDeviceEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE ATAPI Device Table."
	::= { cpqIdeAtapiDevice 1 }


cpqIdeAtapiDeviceEntry OBJECT-TYPE
	SYNTAX CpqIdeAtapiDeviceEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE ATAPI Device Table Entry."
	INDEX { cpqIdeAtapiDeviceControllerIndex , cpqIdeAtapiDeviceIndex }

	::= { cpqIdeAtapiDeviceTable 1 }

cpqIdeAtapiDeviceEntry ::=
	SEQUENCE {
		cpqIdeAtapiDeviceControllerIndex INTEGER,
		cpqIdeAtapiDeviceIndex INTEGER,
		cpqIdeAtapiDeviceModel DisplayString,
		cpqIdeAtapiDeviceFwRev DisplayString,
		cpqIdeAtapiDeviceType INTEGER,
		cpqIdeAtapiDeviceTypeExtended INTEGER,
		cpqIdeAtapiDeviceChannel INTEGER,
		cpqIdeAtapiDeviceNumber INTEGER
		}

cpqIdeAtapiDeviceControllerIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index that uniquely identifies each controller."
	::= { cpqIdeAtapiDeviceEntry 1 }


cpqIdeAtapiDeviceIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index that uniquely identifies each ATAPI device."
	::= { cpqIdeAtapiDeviceEntry 2 }


cpqIdeAtapiDeviceModel OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ATAPI Device Model.

The is the model name of the ATAPI device."
	::= { cpqIdeAtapiDeviceEntry 3 }


cpqIdeAtapiDeviceFwRev OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ATAPI Device Firmware Revision.

The is the firmware revision of the ATAPI device."
	::= { cpqIdeAtapiDeviceEntry 4 }


cpqIdeAtapiDeviceType OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	disk(2),
	tape(3),
	printer(4),
	processor(5),
	wormDrive(6),
	cd-rom(7),
	scanner(8),
	optical(9),
	jukeBox(10),
	commDev(11)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ATAPI Device Type.

This is the type of ATAPI device.  The following types are defined:

other(1)
The agent does not recognize this type.
You may need to upgrade your software.

disk(2)
This is a direct-access device like a disk drive.

tape(3)
This is a sequential-access device like a tape drive.

printer(4)
This is a printer device.

processor(5)
This is a processor device.

worm(6)
This is a write-once, read-many times device.

cd-rom(7)
This is a CD or DVD device.

scanner(8)
This is a scanner device.

optical(9)
This is an optical memory device.

jukeBox(10)
This is a media changer device like a jukebox.

commDev(11)
This is a communications device like a LAN bridge."
	::= { cpqIdeAtapiDeviceEntry 5 }


cpqIdeAtapiDeviceTypeExtended OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	pdcd(2),
	removableDisk(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ATAPI Extended Device Type.

This is additional information about the type of ATAPI device.
The following types are defined:

other(1)
This target does not have any extended type information.

pdcd(2)
This is a power-drive CD-ROM.

removableDisk(3)
This is a removable media disk device like a floppy drive."
	::= { cpqIdeAtapiDeviceEntry 6 }


cpqIdeAtapiDeviceChannel OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	channel0(2),
	channel1(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ATAPI Device Channel.

other(1)
The agent cannot determine the channel to which the ATAPI
device is attached.

channel0(2)
The ATAPI device is attached to the primary channel.

channel1(3)
The ATAPI device is attached to the secondary channel."
	::= { cpqIdeAtapiDeviceEntry 7 }


cpqIdeAtapiDeviceNumber OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	device0(2),
	device1(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ATAPI Device Number.

other(1)
The agent cannot determine the number of the ATAPI device.

device0(2)
The ATAPI device is device 0 (master).

device1(3)
The ATAPI device is device 1 (slave)."
	::= { cpqIdeAtapiDeviceEntry 8 }


cpqIdeLogicalDriveTable OBJECT-TYPE
	SYNTAX SEQUENCE OF CpqIdeLogicalDriveEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Logical Drive Table."
	::= { cpqIdeLogicalDrive 1 }


cpqIdeLogicalDriveEntry OBJECT-TYPE
	SYNTAX CpqIdeLogicalDriveEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Logical Drive Table Entry."
	INDEX { cpqIdeLogicalDriveControllerIndex , cpqIdeLogicalDriveIndex }

	::= { cpqIdeLogicalDriveTable 1 }

cpqIdeLogicalDriveEntry ::=
	SEQUENCE {
		cpqIdeLogicalDriveControllerIndex INTEGER,
		cpqIdeLogicalDriveIndex INTEGER,
		cpqIdeLogicalDriveRaidLevel INTEGER,
		cpqIdeLogicalDriveCapacity INTEGER,
		cpqIdeLogicalDriveStatus INTEGER,
		cpqIdeLogicalDriveCondition INTEGER,
		cpqIdeLogicalDriveDiskIds OCTET STRING,
		cpqIdeLogicalDriveStripeSize INTEGER,
		cpqIdeLogicalDriveSpareIds OCTET STRING,
		cpqIdeLogicalDriveRebuildingDisk INTEGER,
		cpqIdeLogicalDriveOsName DisplayString
		}

cpqIdeLogicalDriveControllerIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index that uniquely identifies each controller."
	::= { cpqIdeLogicalDriveEntry 1 }


cpqIdeLogicalDriveIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index that uniquely identifies each logical drive."
	::= { cpqIdeLogicalDriveEntry 2 }


cpqIdeLogicalDriveRaidLevel OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	raid0(2),
	raid1(3),
	raid0plus1(4),
	raid5(5),
	raid15(6),
	volume(7)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Logical Drive RAID Level.

The following RAID levels are defined:

other(1)
The agent cannot determine the RAID level of this logical drive.

raid0(2)
The logical drive is configured with RAID level 0.

raid1(3)
The logical drive is configured with RAID level 1.

raid0plus1(4)
The logical drive is configured with RAID level 0 plus 1.

raid5(5)
The logical drive is configured with RAID level 5.

raid15(6)
The logical drive is configured with RAID level 1 plus 5.

volume(7)
The logical drive is configured as a volume set."
	::= { cpqIdeLogicalDriveEntry 3 }


cpqIdeLogicalDriveCapacity OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Logical Drive Capacity.

This is the capacity of the logical drive in megabytes."
	::= { cpqIdeLogicalDriveEntry 4 }


cpqIdeLogicalDriveStatus OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	degraded(3),
	rebuilding(4),
	failed(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Logical Drive Status.

This is the status of the logical drive.

other(1)
The agent cannot determine the logical drive status.

ok(2)
Indicates that the logical drive is in normal operation mode.

degraded(3)
Indicates that at least one physical drive has failed, but the
logical drive's RAID level lets the drive continue to operate
with no data loss.

rebuilding(4)
Indicates that the logical drive is rebuilding a physical drive.
When complete, the logical drive will return to normal
operation.

failed(5)
Indicates that more physical drives have failed than the RAID
level of the logical drive can handle without data loss."
	::= { cpqIdeLogicalDriveEntry 5 }


cpqIdeLogicalDriveCondition OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	degraded(3),
	failed(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Logical Drive Condition.

This is the condition of the logical drive."
	::= { cpqIdeLogicalDriveEntry 6 }


cpqIdeLogicalDriveDiskIds OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Logical Drive Disk ID list.

This lists the ATA disks drive IDs which are associated with this
logical drive. These are the same IDs which can be used as
indices into the ATA disk table (cpqIdeAtaDiskIndex). Each byte
of the string is an index."
	::= { cpqIdeLogicalDriveEntry 7 }


cpqIdeLogicalDriveStripeSize OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Logical Drive Stripe Size.

This is the stripe size in kilobytes."
	::= { cpqIdeLogicalDriveEntry 8 }


cpqIdeLogicalDriveSpareIds OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Logical Drive Spare ID list.

This lists the ATA disks drive IDs which are possible spares for
this logical drive. These are the same IDs which can be used as
indices into the ATA disk table (cpqIdeAtaDiskIndex). Each byte
of the string is an index."
	::= { cpqIdeLogicalDriveEntry 9 }


cpqIdeLogicalDriveRebuildingDisk OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Logical Drive Rebuilding Disk.

This is the ATA disk that is in the process of rebuilding.  If no
drive is currently rebuilding, a value of -1 will be returned."
	::= { cpqIdeLogicalDriveEntry 10 }


cpqIdeLogicalDriveOsName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "IDE Logical Drive OS Name.

The OS name for this logical drive.  This field will be a null
(size 0) string if the agent does not support OS name."
	::= { cpqIdeLogicalDriveEntry 11 }


cpqIdeDriveUltraAtaDegraded TRAP-TYPE
      ENTERPRISE compaq
      VARIABLES { sysName, cpqHoTrapFlags, cpqIdeIdentIndex }
      --#SUMMARY "IDE drive %d has detected Ultra ATA errors."
      --#ARGUMENTS {2}
      --#SEVERITY INFORMATIONAL
      --#TIMEINDEX 99
      --#STATE DEGRADED
      --#MSG_FORMATTER "$V3V#IDE Controller: #"
      --#TYPE "IDE Drive Ultra ATA Degraded (14003)"
      --#ENABLE true
      --#CATEGORY "Proliant Storage Events"
DESCRIPTION "An IDE drive detects an excessive number of Ultra ATA data transmission errors between the hard drive and the processor.  User Action: For best performance move Ultra ATA devices to the primary controller and non Ultra ATA devices to the secondary controller.  If errors still persist, consider replacing the standard 40-conductor IDE cable with an 80-conductor Ultra ATA cable."
      ::= 14003


cpqIdeAtaDiskStatusChange TRAP-TYPE
      ENTERPRISE compaq
      VARIABLES { sysName, cpqHoTrapFlags, cpqIdeAtaDiskControllerIndex, cpqIdeAtaDiskIndex, cpqIdeAtaDiskModel, cpqIdeAtaDiskFwRev, cpqIdeAtaDiskSerialNumber, cpqIdeAtaDiskStatus, cpqIdeAtaDiskChannel, cpqIdeAtaDiskNumber }
      --#SUMMARY "Status is now %d for the ATA disk."
      --#ARGUMENTS {7}
      --#SEVERITY CRITICAL
      --#TIMEINDEX 99
      --#MSG_FORMATTER "$V3V#Ide Controller : # $V3V#Controller Index: # $V4V#Disk Index: # $V5V#Model: # $V6V#FW Rev: # $V7V#Serial Number: # $V8V#Status: # $V9V#Channel: # $V10V#DiskNumber: #"
      --#TYPE "ATA Disk Drive Status Change (14004)"
      --#ENABLE true
      --#CATEGORY "Proliant Storage Events"
      --#VARBINDSEVERITY 2
DESCRIPTION "ATA Disk Status Change.  This trap signifies that the agent has detected a change in the status of an ATA disk drive.  The variable cpqIdeAtaDiskStatus indicates the current disk drive status.  User Action: If the physical drive status is smartError(3) or failed(4), replace the drive."
      ::= 14004


cpqIdeDriveOk TRAP-TYPE
      ENTERPRISE compaq
      VARIABLES { sysName, cpqHoTrapFlags, cpqIdeIdentIndex }
      --#SUMMARY "IDE drive %d has returned to normal operating condition."
      --#ARGUMENTS {2}
      --#SEVERITY INFORMATIONAL
      --#TIMEINDEX 99
      --#STATE OPERATIONAL
      --#MSG_FORMATTER "$V3V#IDE Controller: #"
      --#TYPE "IDE Drive OK (14002)"
      --#ENABLE true
      --#CATEGORY "Proliant Storage Events"
DESCRIPTION "An IDE drive status has been set to ok.  User Action: None."
      ::= 14002


cpqIdeDriveDegraded TRAP-TYPE
      ENTERPRISE compaq
      VARIABLES { sysName, cpqHoTrapFlags, cpqIdeIdentIndex }
      --#SUMMARY "IDE drive %d has become degraded."
      --#ARGUMENTS {2}
      --#SEVERITY CRITICAL
      --#TIMEINDEX 99
      --#STATE DEGRADED
      --#MSG_FORMATTER "$V3V#IDE Controller: #"
      --#TYPE "IDE Drive Degraded (14001)"
      --#ENABLE true
      --#CATEGORY "Proliant Storage Events"
DESCRIPTION "An IDE drive status has been set to degraded.  User Action: The drive should be scheduled for replacement.  Refer to the appropriate Maintenance and Service Guide for detailed information on a component replacement."
      ::= 14001


cpqIdeLogicalDriveStatusChange TRAP-TYPE
      ENTERPRISE compaq
      VARIABLES { sysName, cpqHoTrapFlags, cpqIdeControllerModel, cpqIdeControllerSlot, cpqIdeLogicalDriveControllerIndex, cpqIdeLogicalDriveIndex, cpqIdeLogicalDriveStatus }
      --#SUMMARY "Status is now %d for the IDE logical drive."
      --#ARGUMENTS {6}
      --#SEVERITY CRITICAL
      --#TIMEINDEX 99
      --#MSG_FORMATTER "$V3V#Ide Controller Model: # $V4V#Controller Slot Number: # $V5V#Controller Index: # $V6V#Ide Logical Drive Index: # $V7V#Logical Drive Status: #"
      --#TYPE "IDE Logical Drive Status Change (14005)"
      --#ENABLE true
      --#CATEGORY "Proliant Storage Events"
      --#VARBINDSEVERITY 2
DESCRIPTION "IDE Logical Drive Status Change.  This trap signifies that the agent has detected a change in the status of an IDE logical drive.  The variable cpqIdeLogicalDriveStatus indicates the current logical drive status.  User Action: If the logical drive status is failed(5), examine the array for failed drives that need replacement."
      ::= 14005


END