#-MIBFILE: v5_3sw.mib

SW-MIB DEFINITIONS ::= BEGIN


DisplayString ::=
	OCTET STRING (SIZE(0..255))

PhysAddress ::=
	OCTET STRING

MacAddress ::=
	OCTET STRING (SIZE(6))

TruthValue ::=
	INTEGER {
	true(1),
	false(2)
	}

TestAndIncr ::=
	INTEGER (0..2147483647)

AutonomousType ::=
	OBJECT IDENTIFIER

InstancePointer ::=
	OBJECT IDENTIFIER

VariablePointer ::=
	OBJECT IDENTIFIER

RowPointer ::=
	OBJECT IDENTIFIER

RowStatus ::=
	INTEGER {
	active(1),
	notInService(2),
	notReady(3),
	createAndGo(4),
	createAndWait(5),
	destroy(6)
	}

TimeStamp ::=
	TimeTicks

TimeInterval ::=
	INTEGER (0..2147483647)

DateAndTime ::=
	OCTET STRING (SIZE(8|11))

StorageType ::=
	INTEGER {
	other(1),
	volatile(2),
	nonVolatile(3),
	permanent(4),
	readOnly(5)
	}

TDomain ::=
	OBJECT IDENTIFIER

TAddress ::=
	OCTET STRING (SIZE(1..255))

FcWwn ::=
	OCTET STRING (SIZE(8))

SwDomainIndex ::=
	INTEGER (1..239)

SwNbIndex ::=
	INTEGER (1..2048)

SwSensorIndex ::=
	INTEGER (1..1024)

SwPortIndex ::=
	INTEGER

SwTrunkMaster ::=
	INTEGER

bcsi OBJECT IDENTIFIER ::= { enterprises 1588 }
commDev OBJECT IDENTIFIER ::= { bcsi 2 }
fibrechannel OBJECT IDENTIFIER ::= { commDev 1 }
fcSwitch OBJECT IDENTIFIER ::= { fibrechannel 1 }
bcsiReg OBJECT IDENTIFIER ::= { bcsi 3 }
bcsiModules OBJECT IDENTIFIER ::= { bcsiReg 1 }
commDev OBJECT IDENTIFIER ::= { bcsi 2 }
SwSevType ::=
	INTEGER {
	none(0),
	critical(1),
	error(2),
	warning(3),
	informational(4),
	debug(5)
	}

SwFwActs ::=
	INTEGER {
	swFwNoAction(0),
	swFwErrlog(1),
	swFwSnmptrap(2),
	swFwErrlogSnmptrap(3),
	swFwPortloglock(4),
	swFwErrlogPortloglock(5),
	swFwSnmptrapPortloglock(6),
	swFwErrlogSnmptrapPortloglock(7),
	swFwRn(8),
	swFwElRn(9),
	swFwStRn(10),
	swFwElStRn(11),
	swFwPlRn(12),
	swFwElPlRn(13),
	swFwStPlRn(14),
	swFwElStPlRn(15),
	swFwMailAlert(16),
	swFwMailAlertErrlog(17),
	swFwMailAlertSnmptrap(18),
	swFwMailAlertErrlogSnmptrap(19),
	swFwMailAlertPortloglock(20),
	swFwMailAlertErrlogPortloglock(21),
	swFwMailAlertSnmptrapPortloglock(22),
	swFwMailAlertErrlogSnmptrapPortloglock(23),
	swFwMailAlertRn(24),
	swFwElMailAlertRn(25),
	swFwMailAlertStRn(26),
	swFwMailAlertElStRn(27),
	swFwMailAlertPlRn(28),
	swFwMailAlertElPlRn(29),
	swFwMailAlertStPlRn(30),
	swFwMailAlertElStPlRn(31)
	}

SwFwLevels ::=
	INTEGER {
	swFwReserved(1),
	swFwDefault(2),
	swFwCustom(3)
	}

SwFwClassesAreas ::=
	INTEGER {
	swFwEnvTemp(1),
	swFwEnvFan(2),
	swFwEnvPs(3),
	swFwTransceiverTemp(4),
	swFwTransceiverRxp(5),
	swFwTransceiverTxp(6),
	swFwTransceiverCurrent(7),
	swFwPortLink(8),
	swFwPortSync(9),
	swFwPortSignal(10),
	swFwPortPe(11),
	swFwPortWords(12),
	swFwPortCrcs(13),
	swFwPortRXPerf(14),
	swFwPortTXPerf(15),
	swFwPortState(16),
	swFwFabricEd(17),
	swFwFabricFr(18),
	swFwFabricDi(19),
	swFwFabricSc(20),
	swFwFabricZc(21),
	swFwFabricFq(22),
	swFwFabricFl(23),
	swFwFabricGs(24),
	swFwEPortLink(25),
	swFwEPortSync(26),
	swFwEPortSignal(27),
	swFwEPortPe(28),
	swFwEPortWords(29),
	swFwEPortCrcs(30),
	swFwEPortRXPerf(31),
	swFwEPortTXPerf(32),
	swFwEPortState(33),
	swFwFCUPortLink(34),
	swFwFCUPortSync(35),
	swFwFCUPortSignal(36),
	swFwFCUPortPe(37),
	swFwFCUPortWords(38),
	swFwFCUPortCrcs(39),
	swFwFCUPortRXPerf(40),
	swFwFCUPortTXPerf(41),
	swFwFCUPortState(42),
	swFwFOPPortLink(43),
	swFwFOPPortSync(44),
	swFwFOPPortSignal(45),
	swFwFOPPortPe(46),
	swFwFOPPortWords(47),
	swFwFOPPortCrcs(48),
	swFwFOPPortRXPerf(49),
	swFwFOPPortTXPerf(50),
	swFwFOPPortState(51),
	swFwPerfALPACRC(52),
	swFwPerfEToECRC(53),
	swFwPerfEToERxCnt(54),
	swFwPerfEToETxCnt(55),
	swFwPerffltCusDef(56),
	swFwTransceiverVoltage(57),
	swFwSecTelnetViolations(58),
	swFwSecHTTPViolations(59),
	swFwSecAPIViolations(60),
	swFwSecRSNMPViolations(61),
	swFwSecWSNMPViolations(62),
	swFwSecSESViolations(63),
	swFwSecMSViolations(64),
	swFwSecSerialViolations(65),
	swFwSecFPViolations(66),
	swFwSecSCCViolations(67),
	swFwSecDCCViolations(68),
	swFwSecLoginViolations(69),
	swFwSecInvaledTS(70),
	swFwSecInvalidSign(71),
	swFwSecInvalidCert(72),
	swFwSecSlapFail(73),
	swFwSecSlapBadPkt(74),
	swFwSecTSOutSync(75),
	swFwSecNoFcs(76),
	swFwSecIncompDB(77),
	swFwSecIllegalCmd(78),
	swFwSAMTotalDownTime(79),
	swFwSAMTotalUpTime(80),
	swFwSAMDurationOfOccur(81),
	swFwSAMFreqOfOccur(82),
	swFwResourceFlash(83)
	}

SwFwWriteVals ::=
	INTEGER {
	swFwCancelWrite(1),
	swFwApplyWrite(2)
	}

SwFwTimebase ::=
	INTEGER {
	swFwTbNone(1),
	swFwTbSec(2),
	swFwTbMin(3),
	swFwTbHour(4),
	swFwTbDay(5)
	}

SwFwStatus ::=
	INTEGER {
	disabled(1),
	enabled(2)
	}

SwFwEvent ::=
	INTEGER {
	started(1),
	changed(2),
	exceeded(3),
	below(4),
	above(5),
	inBetween(6)
	}

SwFwBehavior ::=
	INTEGER {
	triggered(1),
	continuous(2)
	}

SwFwState ::=
	INTEGER {
	swFwInformative(1),
	swFwNormal(2),
	swFwFaulty(3)
	}

SwFwLicense ::=
	INTEGER {
	swFwLicensed(1),
	swFwNotLicensed(2)
	}

swMibModule OBJECT IDENTIFIER ::= { bcsiModules 3 }

sw OBJECT IDENTIFIER ::= { fcSwitch 1 }

sw28k OBJECT IDENTIFIER ::= { fcSwitch 2 }

sw21kN24k OBJECT IDENTIFIER ::= { fcSwitch 3 }

sw20x0 OBJECT IDENTIFIER ::= { fcSwitch 4 }

swSystem OBJECT IDENTIFIER ::= { sw 1 }

swFabric OBJECT IDENTIFIER ::= { sw 2 }

swModule OBJECT IDENTIFIER ::= { sw 3 }

swAgtCfg OBJECT IDENTIFIER ::= { sw 4 }

swFCport OBJECT IDENTIFIER ::= { sw 6 }

swNs OBJECT IDENTIFIER ::= { sw 7 }

swEvent OBJECT IDENTIFIER ::= { sw 8 }

swFwSystem OBJECT IDENTIFIER ::= { sw 10 }

swEndDevice OBJECT IDENTIFIER ::= { sw 21 }

swGroup OBJECT IDENTIFIER ::= { sw 22 }

swBlmPerfMnt OBJECT IDENTIFIER ::= { sw 23 }

swTrunk OBJECT IDENTIFIER ::= { sw 24 }

swCurrentDate OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..64))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current date information in displayable textual
format."
	::= { swSystem 1 }


swBootDate OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..64))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The date and time when the system last booted, in
displayable textual format."
	::= { swSystem 2 }


swFWLastUpdated OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..64))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The information indicates the date when the firmware
was last updated, in displayable textual format."
	::= { swSystem 3 }


swFlashLastUpdated OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..64))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The information indicates the date when the FLASH
was last updated, in displayable textual format."
	::= { swSystem 4 }


swBootPromLastUpdated OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..64))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The information indicates the date when the boot PROM
was last updated, in displayable textual format."
	::= { swSystem 5 }


swFirmwareVersion OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..24))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current version of the firwmare."
	::= { swSystem 6 }


swOperStatus OBJECT-TYPE
	SYNTAX INTEGER {
	online(1),
	offline(2),
	testing(3),
	faulty(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current operational status of the switch.
The states are as follow:
o online(1) means the switch is accessible by an external
Fibre Channel port;
o offline(2) means the switch is not accessible;
o testing(3) means the switch is in a built-in test mode
and is not accessible by an external Fibre Channel port;
o faulty(4) means the switch is not operational."
	::= { swSystem 7 }


swAdmStatus OBJECT-TYPE
	SYNTAX INTEGER {
	online(1),
	offline(2),
	testing(3),
	faulty(4),
	reboot(5),
	fastboot(6),
	switchReboot(7)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The desired administrative status of the switch.
A management station may place the switch in a desired
state by setting this object accordingly. The states
are as follow:
o online(1) means set the switch to be accessible by an
external Fibre Channel port;
o offline(2) means set the switch to be inaccessible;
o testing(3) means set the switch to run the built-in test;
o faulty(4) means set the switch to a 'soft' faulty
condition;
o reboot(5) means set the switch to reboot in 1 second.
o fastboot(6) means set the switch to fastboot in 1 second.
Fastboot would cause the switch to boot but skip over the
POST.
o switchReboot(7) means set the current switch to reboot in
1 second.

When the switch is in faulty state, only two states
can be set: faulty and reboot/fastboot/switchReboot."
	::= { swSystem 8 }


swTelnetShellAdmStatus OBJECT-TYPE
	SYNTAX INTEGER {
	unknown(0),
	terminated(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The desired administrative status of the Telnet
shell. By setting it to terminated(1), the current
Telnet shell task is deleted. When this variable instance
is read, it reports the value last set through SNMP."
	::= { swSystem 9 }


swSsn OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..128))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The soft serial number of the switch."
	::= { swSystem 10 }


swFlashDLOperStatus OBJECT-TYPE
	SYNTAX INTEGER {
	unknown(0),
	swCurrent(1),
	swFwUpgraded(2),
	swCfUploaded(3),
	swCfDownloaded(4),
	swFwCorrupted(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The operational status of the FLASH.
The operational states are as follow:
o swCurrent(1) indicates that the FLASH contains the
current firmware image or config file;
o swFwUpgraded(2) state indicates that it contains the image
upgraded from the swFlashDLHost.0.;
o swCfUploaded(3) state indicates that the switch configuration
file has been uploaded to the host; and
o swCfDownloaded(4) state indicates that the switch
configuration file has been downloaded from the host.
o swFwCorrupted (5) state indicates that the firmware in the
FLASH of the switch is corrupted."
	::= { swSystem 11 }


swFlashDLAdmStatus OBJECT-TYPE
	SYNTAX INTEGER {
	swCurrent(1),
	swFwUpgrade(2),
	swCfUpload(3),
	swCfDownload(4),
	swFwCorrupted(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The desired state of the FLASH.
A management station may place the FLASH in a desired
state by setting this object accordingly:
o swCurrent(1) indicates that the FLASH contains the
current firmware image or config file;
o swFwUpgrade(2) means that the firmware in the	FLASH is to be
upgraded from the host specified;
o swCfUpload(3) means that the switch config file is to be
uploaded to the host specified; or
o swCfDownload(4) means that the switch config file is to be
downloaded from the host specified.
o swFwCorrupted(5) state indicates that the firmware in the
FLASH is corrupted. This value is for informational purpose
only. However, set of swFlashDLAdmStatus to this value is
not allowed.

The host is specified in swFlashDLHost.0. In addition,
user name is specified in swFlashDLUser.0, and
the file name specified in swFlashDLFile.0.

Reference the user manual on the following commands,
o firmwareDownload,
o configUpload, and
o configDownload."
	::= { swSystem 12 }


swFlashDLHost OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..64))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The name or IP address (in dot notation) of the host
to download or upload a relevant file to the FLASH."
	::= { swSystem 13 }


swFlashDLUser OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..64))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The user name on the host to download or upload
a relevant file to or from the FLASH."
	::= { swSystem 14 }


swFlashDLFile OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The name of the file to be downloaded or uploaded."
	::= { swSystem 15 }


swFlashDLPassword OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..100))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The password to be used in for FTP transfer of
files in the download or upload operation."
	::= { swSystem 16 }


swBeaconOperStatus OBJECT-TYPE
	SYNTAX INTEGER {
	on(1),
	off(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current operational status of the switch beacon.
When the beacon is on, the LEDs on the front panel
of the switch run alternately from left to right
and right to left. The color is yellow.
When the beacon is off, each LED will be in their
its regular status indicating color and state."
	::= { swSystem 18 }


swBeaconAdmStatus OBJECT-TYPE
	SYNTAX INTEGER {
	on(1),
	off(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The desired status of the switch beacon.
When the beacon is set to on, the LEDs on the front
panel of the switch run alternately from left to right
and right to left. The color is yellow.
When the beacon is set to off, each LED will be in
its regular status indicating color and state."
	::= { swSystem 19 }


swDiagResult OBJECT-TYPE
	SYNTAX INTEGER {
	sw-ok(1),
	sw-faulty(2),
	sw-embedded-port-fault(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The result of the power-on startup (POST)
diagnostics."
	::= { swSystem 20 }


swNumSensors OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of sensors inside the switch."
	::= { swSystem 21 }


swSensorTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SwSensorEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The table of sensor entries."
	::= { swSystem 22 }


swSensorEntry OBJECT-TYPE
	SYNTAX SwSensorEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry of the sensor information."
	INDEX { swSensorIndex  }

	::= { swSensorTable 1 }

swSensorEntry ::=
	SEQUENCE {
		swSensorIndex SwSensorIndex,
		swSensorType INTEGER,
		swSensorStatus INTEGER,
		swSensorValue Integer32,
		swSensorInfo DisplayString(SIZE(0..255))
		}

swSensorIndex OBJECT-TYPE
	SYNTAX SwSensorIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the sensor."
	::= { swSensorEntry 1 }


swSensorType OBJECT-TYPE
	SYNTAX INTEGER {
	temperature(1),
	fan(2),
	power-supply(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the sensor type."
	::= { swSensorEntry 2 }


swSensorStatus OBJECT-TYPE
	SYNTAX INTEGER {
	unknown(1),
	faulty(2),
	below-min(3),
	nominal(4),
	above-max(5),
	absent(6)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current status of the sensor."
	::= { swSensorEntry 3 }


swSensorValue OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current value (reading) of the sensor.
The value, -2147483648, represents an unknown quantity.
It also means that the sensor does not have the capability to
measure the actual value. In V2.0, the temperature sensor
value will be in Celsius; the fan value will be in RPM
(revolution per minute); and the power supply sensor reading
will be unknown."
	::= { swSensorEntry 4 }


swSensorInfo OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Additional displayable information on the sensor.
In V2.x, it contains the sensor type and number
in textual format. For example, 'Temp 3', 'Fan 6'."
	::= { swSensorEntry 5 }


swTrackChangesInfo OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Track changes string. For trap only"
	::= { swSystem 23 }


swID OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of the logical switch (0/1)"
	::= { swSystem 24 }


swEtherIPAddress OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP Address of the Ethernet interface of this logical
switch."
	::= { swSystem 25 }


swEtherIPMask OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP Mask of the Ethernet interface of this logical switch."
	::= { swSystem 26 }


swFCIPAddress OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP Address of the FC interface of this logical switch."
	::= { swSystem 27 }


swFCIPMask OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP Mask of the FC interface of this logical switch."
	::= { swSystem 28 }


swDomainID OBJECT-TYPE
	SYNTAX SwDomainIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current Fibre Channel domain ID of the switch.
To set a new value, the switch (swAdmStatus) must be in
offline or testing state."
	::= { swFabric 1 }


swPrincipalSwitch OBJECT-TYPE
	SYNTAX INTEGER {
	yes(1),
	no(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object indicates whether the switch is
the Principal switch as per FC-SW."
	::= { swFabric 2 }


swNumNbs OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of Inter-Switch Links in the (immediate)
neighborhood."
	::= { swFabric 8 }


swNbTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SwNbEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This table contains the ISLs in the immediate
neighborhood of the switch."
	::= { swFabric 9 }


swNbEntry OBJECT-TYPE
	SYNTAX SwNbEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry containing each neighbor ISL parameters."
	INDEX { swNbIndex  }

	::= { swNbTable 1 }

swNbEntry ::=
	SEQUENCE {
		swNbIndex SwNbIndex,
		swNbMyPort SwPortIndex,
		swNbRemDomain SwDomainIndex,
		swNbRemPort SwPortIndex,
		swNbBaudRate INTEGER,
		swNbIslState INTEGER,
		swNbIslCost Integer32,
		swNbRemPortName OCTET STRING
		}

swNbIndex OBJECT-TYPE
	SYNTAX SwNbIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the neighbor ISL entry."
	::= { swNbEntry 1 }


swNbMyPort OBJECT-TYPE
	SYNTAX SwPortIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This is the port that has an ISL to another switch."
	::= { swNbEntry 2 }


swNbRemDomain OBJECT-TYPE
	SYNTAX SwDomainIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This is the Fibre Channel domain on the other end
of the ISL."
	::= { swNbEntry 3 }


swNbRemPort OBJECT-TYPE
	SYNTAX SwPortIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This is the port index on the other end of the ISL."
	::= { swNbEntry 4 }


swNbBaudRate OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	oneEighth(2),
	quarter(4),
	half(8),
	full(16),
	double(32),
	quadruple(64)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The baud rate of the ISL."
	::= { swNbEntry 5 }


swNbIslState OBJECT-TYPE
	SYNTAX INTEGER {
	sw-init(1),
	sw-internal2(2),
	sw-internal3(3),
	sw-internal4(4),
	sw-active(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current state of the ISL."
	::= { swNbEntry 6 }


swNbIslCost OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current link cost of the ISL."
	::= { swNbEntry 7 }


swNbRemPortName OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(8))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The World_wide_Name of the remote port."
	::= { swNbEntry 8 }


swFabricMemTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SwFabricMemEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This table contains information on the member 
switches of a fabric. This may not be available on
all versions of Fabric OS."
	::= { swFabric 10 }


swFabricMemEntry OBJECT-TYPE
	SYNTAX SwFabricMemEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry containing each switch in the fabric."
	INDEX { swFabricMemWwn  }

	::= { swFabricMemTable 1 }

swFabricMemEntry ::=
	SEQUENCE {
		swFabricMemWwn FcWwn,
		swFabricMemDid SwDomainIndex,
		swFabricMemName DisplayString,
		swFabricMemEIP IpAddress,
		swFabricMemFCIP IpAddress,
		swFabricMemGWIP IpAddress,
		swFabricMemType Integer32,
		swFabricMemShortVersion OCTET STRING
		}

swFabricMemWwn OBJECT-TYPE
	SYNTAX FcWwn
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the World wide name of the
member switch."
	::= { swFabricMemEntry 1 }


swFabricMemDid OBJECT-TYPE
	SYNTAX SwDomainIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the domain id of the member
switch."
	::= { swFabricMemEntry 2 }


swFabricMemName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the name of the member switch."
	::= { swFabricMemEntry 3 }


swFabricMemEIP OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the ethernet IP address
of the member switch."
	::= { swFabricMemEntry 4 }


swFabricMemFCIP OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the Fibre Channel IP address
of the member switch."
	::= { swFabricMemEntry 5 }


swFabricMemGWIP OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the Gateway IP address
of the member switch."
	::= { swFabricMemEntry 6 }


swFabricMemType OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the member switch type."
	::= { swFabricMemEntry 7 }


swFabricMemShortVersion OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..24))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies Fabric OS version of
the member switch."
	::= { swFabricMemEntry 8 }


swIDIDMode OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Status of Insistent Domain ID (IDID) mode. Status
indicating IDID mode is enabled or not."
	::= { swFabric 11 }


swAgtCmtyTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SwAgtCmtyEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table that contains, one entry for each Community,
the access control and parameters of the Community."
	::= { swAgtCfg 11 }


swAgtCmtyEntry OBJECT-TYPE
	SYNTAX SwAgtCmtyEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry containing the Community parameters."
	INDEX { swAgtCmtyIdx  }

	::= { swAgtCmtyTable 1 }

swAgtCmtyEntry ::=
	SEQUENCE {
		swAgtCmtyIdx Integer32,
		swAgtCmtyStr DisplayString,
		swAgtTrapRcp IpAddress,
		swAgtTrapSeverityLevel SwSevType
		}

swAgtCmtyIdx OBJECT-TYPE
	SYNTAX INTEGER (1..6)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the SNMPv1 Community entry."
	::= { swAgtCmtyEntry 1 }


swAgtCmtyStr OBJECT-TYPE
	SYNTAX DisplayString (SIZE(2..16))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This is a Community string supported by the agent.
If a new value is set successfully, it takes effect
immediately."
	::= { swAgtCmtyEntry 2 }


swAgtTrapRcp OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This is the trap recipient associated with the
Community. If a new value is set successfully, it takes
effect immediately."
	::= { swAgtCmtyEntry 3 }


swAgtTrapSeverityLevel OBJECT-TYPE
	SYNTAX INTEGER {
	none(0),
	critical(1),
	error(2),
	warning(3),
	informational(4),
	debug(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This is the trap severity level associated with the
swAgtTrapRcp. The trap severity level in conjunction with
the an event's severity level. When an event occurs and if its
severity level is at or below the set value, the SNMP trap is
sent to configured trap recipients. The severity level is
limited to particular events. If a new value is set successfully,
it takes effect immediately."
	::= { swAgtCmtyEntry 4 }


swFCPortCapacity OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum number of Fibre Channel ports on this
switch. It includes G_Port, F_Port, FL_Port and any other
types of Fibre Channel port."
	::= { swFCport 1 }


swFCPortTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SwFCPortEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table that contains, one entry for each switch port,
configuration and service parameters of the port."
	::= { swFCport 2 }


swFCPortEntry OBJECT-TYPE
	SYNTAX SwFCPortEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry containing the configuration and service
parameters of the switch port."
	INDEX { swFCPortIndex  }

	::= { swFCPortTable 1 }

swFCPortEntry ::=
	SEQUENCE {
		swFCPortIndex SwPortIndex,
		swFCPortType INTEGER,
		swFCPortPhyState INTEGER,
		swFCPortOpStatus INTEGER,
		swFCPortAdmStatus INTEGER,
		swFCPortLinkState INTEGER,
		swFCPortTxType INTEGER,
		swFCPortTxWords Counter32,
		swFCPortRxWords Counter32,
		swFCPortTxFrames Counter32,
		swFCPortRxFrames Counter32,
		swFCPortRxC2Frames Counter32,
		swFCPortRxC3Frames Counter32,
		swFCPortRxLCs Counter32,
		swFCPortRxMcasts Counter32,
		swFCPortTooManyRdys Counter32,
		swFCPortNoTxCredits Counter32,
		swFCPortRxEncInFrs Counter32,
		swFCPortRxCrcs Counter32,
		swFCPortRxTruncs Counter32,
		swFCPortRxTooLongs Counter32,
		swFCPortRxBadEofs Counter32,
		swFCPortRxEncOutFrs Counter32,
		swFCPortRxBadOs Counter32,
		swFCPortC3Discards Counter32,
		swFCPortMcastTimedOuts Counter32,
		swFCPortTxMcasts Counter32,
		swFCPortLipIns Counter32,
		swFCPortLipOuts Counter32,
		swFCPortLipLastAlpa OCTET STRING,
		swFCPortWwn OCTET STRING,
		swFCPortSpeed INTEGER,
		swFCPortName DisplayString(SIZE(0..32)),
		swFCPortSpecifier DisplayString
		}

swFCPortIndex OBJECT-TYPE
	SYNTAX SwPortIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the switch port index.
Note that the value of a port index is 1 higher than the
port number labeled on the front panel.
E.g. port index 1 correspond to port number 0."
	::= { swFCPortEntry 1 }


swFCPortType OBJECT-TYPE
	SYNTAX INTEGER {
	stitch(1),
	flannel(2),
	loom(3),
	bloom(4),
	rdbloom(5),
	wormhole(6),
	other(7),
	unknown(8)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the type of switch port.
It may be of type stitch(1), flannel(2), loom(3) , bloom(4),rdbloom(5) or wormhole(6)."
	::= { swFCPortEntry 2 }


swFCPortPhyState OBJECT-TYPE
	SYNTAX INTEGER {
	noCard(1),
	noTransceiver(2),
	laserFault(3),
	noLight(4),
	noSync(5),
	inSync(6),
	portFault(7),
	diagFault(8),
	lockRef(9)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the physical state of
the port:
noCard(1)	no card present in this switch slot;
noTransceiver(2)	no Transceiver module in this port.
noGbic(2) was used previously. Transceiver
is the generic name for GBIC, SFP etc.;
laserFault(3)	the module is signaling a laser fault
(defective Transceiver);
noLight(4)	the module is not receiving light;
noSync(5)	the module is receiving light but is
out of sync;
inSync(6)	the module is receiving light and is
in sync;
portFault(7)	the port is marked faulty (defective
Transceiver, cable or device);
diagFault(8)	the port failed diagnostics (defective
G_Port or FL_Port card or motherboard);
lockRef(9)	the port is locking to the reference
signal.
"
	::= { swFCPortEntry 3 }


swFCPortOpStatus OBJECT-TYPE
	SYNTAX INTEGER {
	unknown(0),
	online(1),
	offline(2),
	testing(3),
	faulty(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the operational status of
the port. The online(1) state indicates that user frames
can be passed. The unknown(0) state indicates that likely
the port module is physically absent (see swFCPortPhyState)."
	::= { swFCPortEntry 4 }


swFCPortAdmStatus OBJECT-TYPE
	SYNTAX INTEGER {
	online(1),
	offline(2),
	testing(3),
	faulty(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The desired state of the port. A management station
may place the port in a desired state by setting this
object accordingly.  The testing(3) state indicates that
no user frames can be passed. As the result of
either explicit management action or per configuration
information accessible by the switch, swFCPortAdmStatus is
then changed to either the online(1) or testing(3)
states,	or remains in the offline(2) state."
	::= { swFCPortEntry 5 }


swFCPortLinkState OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2),
	loopback(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object indicates the link state of the port.
The value may be:
enabled(1) - port is allowed to participate in the FC-PH
protocol with its attached port (or ports if it is
in a FC-AL loop);
disabled(2) - the port is not allowed to participate in
the FC-PH protocol with its attached port(s);
loopback(3) - the port may transmit frames through an
internal path to verify the health of the transmitter
and receiver path.

Note that when the port's link state changes, its
operational status (swFCPortOpStatus) will be affected."
	::= { swFCPortEntry 6 }


swFCPortTxType OBJECT-TYPE
	SYNTAX INTEGER {
	unknown(1),
	lw(2),
	sw(3),
	ld(4),
	cu(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object indicates the media transmitter type of
the port. The value may be:
unknown(1)		cannot determined to the port driver
lw(2)			long wave laser
sw(3)			short wave laser
ld(4)			long wave LED
cu(5)			copper (electrical)."
	::= { swFCPortEntry 7 }


swFCPortTxWords OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of Fibre Channel
words that the port has transmitted."
	::= { swFCPortEntry 11 }


swFCPortRxWords OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of Fibre Channel
words that the port has received."
	::= { swFCPortEntry 12 }


swFCPortTxFrames OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of (Fibre Channel)
frames that the port has transmitted."
	::= { swFCPortEntry 13 }


swFCPortRxFrames OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of (Fibre Channel)
frames that the port has received."
	::= { swFCPortEntry 14 }


swFCPortRxC2Frames OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of Class 2
frames that the port has received."
	::= { swFCPortEntry 15 }


swFCPortRxC3Frames OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of Class 3
frames that the port has received."
	::= { swFCPortEntry 16 }


swFCPortRxLCs OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of Link Control
frames that the port has received."
	::= { swFCPortEntry 17 }


swFCPortRxMcasts OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of Multicast
frames that the port has received."
	::= { swFCPortEntry 18 }


swFCPortTooManyRdys OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of times when RDYs
exceeds the frames received."
	::= { swFCPortEntry 19 }


swFCPortNoTxCredits OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of times when the
transmit credit has reached zero."
	::= { swFCPortEntry 20 }


swFCPortRxEncInFrs OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of encoding error or
disparity error inside frames received."
	::= { swFCPortEntry 21 }


swFCPortRxCrcs OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of CRC errors
detected for frames received."
	::= { swFCPortEntry 22 }


swFCPortRxTruncs OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of truncated
frames that the port has received."
	::= { swFCPortEntry 23 }


swFCPortRxTooLongs OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of received frames that
are too long."
	::= { swFCPortEntry 24 }


swFCPortRxBadEofs OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of received frames that
have bad EOF delimiter."
	::= { swFCPortEntry 25 }


swFCPortRxEncOutFrs OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of encoding error or
disparity error outside frames received."
	::= { swFCPortEntry 26 }


swFCPortRxBadOs OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of invalid Ordered
Sets received."
	::= { swFCPortEntry 27 }


swFCPortC3Discards OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of Class 3
frames that the port has discarded."
	::= { swFCPortEntry 28 }


swFCPortMcastTimedOuts OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of Multicast
frames that has been timed out."
	::= { swFCPortEntry 29 }


swFCPortTxMcasts OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of Multicast
frames that has been transmitted."
	::= { swFCPortEntry 30 }


swFCPortLipIns OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of Loop Initializations
that has been initiated by loop devices attached."
	::= { swFCPortEntry 31 }


swFCPortLipOuts OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object counts the number of Loop Initializations
that has been initiated by the port."
	::= { swFCPortEntry 32 }


swFCPortLipLastAlpa OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(4))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object indicates the Physical Address (AL_PA)
of the loop device that initiated the last
Loop Initialization."
	::= { swFCPortEntry 33 }


swFCPortWwn OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(8))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The World_wide_Name of the Fibre Channel port.
The contents of an instance are in the IEEE extended format
as specified in FC-PH; the 12-bit port identifier represents
the port number within the switch."
	::= { swFCPortEntry 34 }


swFCPortSpeed OBJECT-TYPE
	SYNTAX INTEGER {
	one-GB(1),
	two-GB(2),
	auto-Negotiate(3),
	four-GB(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The desired baud rate for the port. It can have the
values of 1GB (1), 2GB (2), Auto-Negotiate (3) or 4GB (4).
Some of the above values may not be supported by all type of 
switches."
	::= { swFCPortEntry 35 }


swFCPortName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..32))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A string indicates the name of the addressed port.
The names should be persistent across switch reboots.
Port names do not have to be unique within a switch or
within a fabric."
	::= { swFCPortEntry 36 }


swFCPortSpecifier OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This string indicates the physical port number of the addressed port.
The format of the string is: <slot>/port, where 'slot' being
present only for bladed systems. 
"
	::= { swFCPortEntry 37 }


swNsLocalNumEntry OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of local Name Server entries."
	::= { swNs 1 }


swNsLocalTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SwNsEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The table of local Name Server entries."
	::= { swNs 2 }


swNsLocalEntry OBJECT-TYPE
	SYNTAX SwNsEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry of the local Name Server database."
	INDEX { swNsEntryIndex  }

	::= { swNsLocalTable 1 }

swNsLocalEntry ::=
	SEQUENCE {
		swNsEntryIndex Integer32,
		swNsPortID OCTET STRING(SIZE(4)),
		swNsPortType INTEGER,
		swNsPortName FcWwn,
		swNsPortSymb OCTET STRING,
		swNsNodeName FcWwn,
		swNsNodeSymb OCTET STRING,
		swNsIPA OCTET STRING,
		swNsIpAddress OCTET STRING,
		swNsCos INTEGER,
		swNsFc4 OCTET STRING,
		swNsIpNxPort OCTET STRING(SIZE(16)),
		swNsWwn OCTET STRING(SIZE(8)),
		swNsHardAddr OCTET STRING(SIZE(3))
		}

swNsEntryIndex OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The object identifies the Name Server database entry."
	::= { swNsLocalEntry 1 }


swNsPortID OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(4))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The object identifies the Fibre Channel port address
ID of the entry."
	::= { swNsLocalEntry 2 }


swNsPortType OBJECT-TYPE
	SYNTAX INTEGER {
	nPort(1),
	nlPort(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The object identifies the type of port: N_Port,
NL_Port, etc., for this entry. The type is defined in FC-GS-2."
	::= { swNsLocalEntry 3 }


swNsPortName OBJECT-TYPE
	SYNTAX FcWwn
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The object identifies the Fibre Channel World_wide
Name of the port entry."
	::= { swNsLocalEntry 4 }


swNsPortSymb OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The object identifies the contents of a Symbolic Name
of the port entry. In FC-GS-2, a Symbolic Name consists of
a byte array of 1 through 255 bytes, and the first byte of the
array specifies the length of its 'contents'.
This object variable corresponds to the 'contents' of the
Symbolic Name, without the first byte."
	::= { swNsLocalEntry 5 }


swNsNodeName OBJECT-TYPE
	SYNTAX FcWwn
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The object identifies the Fibre Channel World_wide
Name of the associated node as defined in FC-GS-2."
	::= { swNsLocalEntry 6 }


swNsNodeSymb OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The object identifies the contents of a Symbolic Name
of the the node associated with the entry. In FC-GS-2,
a Symbolic Name consists of a byte array of 1 through 255
bytes, and the first byte of the array specifies the length
of its 'contents'.
This object variable corresponds to the 'contents' of the
Symbolic Name, without the first byte (specifying the length)."
	::= { swNsLocalEntry 7 }


swNsIPA OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(8))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The object identifies the Initial Process Associator
of the node for the entry as defined in FC-GS-2."
	::= { swNsLocalEntry 8 }


swNsIpAddress OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(16))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The object identifies the IP address of the node
for the entry as defined in FC-GS-2. The format of the address
is in IPv6."
	::= { swNsLocalEntry 9 }


swNsCos OBJECT-TYPE
	SYNTAX INTEGER {
	class-F(1),
	class-1(2),
	class-F-1(3),
	class-2(4),
	class-F-2(5),
	class-1-2(6),
	class-F-1-2(7),
	class-3(8),
	class-F-3(9),
	class-1-3(10),
	class-F-1-3(11),
	class-2-3(12),
	class-F-2-3(13),
	class-1-2-3(14),
	class-F-1-2-3(15)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The object identifies the class of services supported
by the port. The value is a bit-map defined as follows:
o bit 0 is class F,
o bit 1 is class 1,
o bit 2 is class 2,
o bit 3 is class 3,
o bit 4 is class 4, etc."
	::= { swNsLocalEntry 10 }


swNsFc4 OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(32))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The object identifies the FC-4s supported
by the port as defined in FC-GS-2."
	::= { swNsLocalEntry 11 }


swNsIpNxPort OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(16))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The object identifies IpAddress of the Nx_port for the entry."
	::= { swNsLocalEntry 12 }


swNsWwn OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(8))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The object identifies the World Wide Name (WWN) of the Fx_port
for the entry."
	::= { swNsLocalEntry 13 }


swNsHardAddr OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(3))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The object identifies the 24-bit hard address of the node
for the entry."
	::= { swNsLocalEntry 14 }


swEventTrapLevel OBJECT-TYPE
	SYNTAX INTEGER {
	none(0),
	critical(1),
	error(2),
	warning(3),
	informational(4),
	debug(5)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "swAgtTrapSeverityLevel, in absence of
swEventTrapLevel, specifies the Trap Severity Level of each
defined trap recipient host.
This object specifies the swEventTrap level in
conjunction with an event's severity level. When an event
occurs and if its severity level is at or below the value
specified by this object instance, the agent will send
the associated swEventTrap to configured recipients."
	::= { swEvent 1 }


swEventNumEntries OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of entries in the Event Table."
	::= { swEvent 4 }


swEventTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SwEventEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The table of event entries."
	::= { swEvent 5 }


swEventEntry OBJECT-TYPE
	SYNTAX SwEventEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry of the event table."
	INDEX { swEventIndex  }

	::= { swEventTable 1 }

swEventEntry ::=
	SEQUENCE {
		swEventIndex Integer32,
		swEventTimeInfo DisplayString,
		swEventLevel INTEGER,
		swEventRepeatCount Integer32,
		swEventDescr DisplayString
		}

swEventIndex OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the event entry."
	::= { swEventEntry 1 }


swEventTimeInfo OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..64))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the date and time when this
event occurred, in textual format."
	::= { swEventEntry 2 }


swEventLevel OBJECT-TYPE
	SYNTAX INTEGER {
	critical(1),
	error(2),
	warning(3),
	informational(4),
	debug(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the severity level of this
event entry."
	::= { swEventEntry 3 }


swEventRepeatCount OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies how many times this particular
event has occurred."
	::= { swEventEntry 4 }


swEventDescr OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the textual description of
the event."
	::= { swEventEntry 5 }


swFwFabricWatchLicense OBJECT-TYPE
	SYNTAX INTEGER {
	swFwLicensed(1),
	swFwNotLicensed(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "tells if licensed or not."
	::= { swFwSystem 1 }


swFwClassAreaTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SwFwClassAreaEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The table of classes and areas."
	::= { swFwSystem 2 }


swFwClassAreaEntry OBJECT-TYPE
	SYNTAX SwFwClassAreaEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry of the classes and areas."
	INDEX { swFwClassAreaIndex  }

	::= { swFwClassAreaTable 1 }

swFwClassAreaEntry ::=
	SEQUENCE {
		swFwClassAreaIndex SwFwClassesAreas,
		swFwWriteThVals SwFwWriteVals,
		swFwDefaultUnit DisplayString,
		swFwDefaultTimebase SwFwTimebase,
		swFwDefaultLow Integer32,
		swFwDefaultHigh Integer32,
		swFwDefaultBufSize Integer32,
		swFwCustUnit DisplayString,
		swFwCustTimebase SwFwTimebase,
		swFwCustLow Integer32,
		swFwCustHigh Integer32,
		swFwCustBufSize Integer32,
		swFwThLevel SwFwLevels,
		swFwWriteActVals SwFwWriteVals,
		swFwDefaultChangedActs SwFwActs,
		swFwDefaultExceededActs SwFwActs,
		swFwDefaultBelowActs SwFwActs,
		swFwDefaultAboveActs SwFwActs,
		swFwDefaultInBetweenActs SwFwActs,
		swFwCustChangedActs SwFwActs,
		swFwCustExceededActs SwFwActs,
		swFwCustBelowActs SwFwActs,
		swFwCustAboveActs SwFwActs,
		swFwCustInBetweenActs SwFwActs,
		swFwValidActs SwFwActs,
		swFwActLevel SwFwLevels
		}

swFwClassAreaIndex OBJECT-TYPE
	SYNTAX INTEGER {
	swFwEnvTemp(1),
	swFwEnvFan(2),
	swFwEnvPs(3),
	swFwTransceiverTemp(4),
	swFwTransceiverRxp(5),
	swFwTransceiverTxp(6),
	swFwTransceiverCurrent(7),
	swFwPortLink(8),
	swFwPortSync(9),
	swFwPortSignal(10),
	swFwPortPe(11),
	swFwPortWords(12),
	swFwPortCrcs(13),
	swFwPortRXPerf(14),
	swFwPortTXPerf(15),
	swFwPortState(16),
	swFwFabricEd(17),
	swFwFabricFr(18),
	swFwFabricDi(19),
	swFwFabricSc(20),
	swFwFabricZc(21),
	swFwFabricFq(22),
	swFwFabricFl(23),
	swFwFabricGs(24),
	swFwEPortLink(25),
	swFwEPortSync(26),
	swFwEPortSignal(27),
	swFwEPortPe(28),
	swFwEPortWords(29),
	swFwEPortCrcs(30),
	swFwEPortRXPerf(31),
	swFwEPortTXPerf(32),
	swFwEPortState(33),
	swFwFCUPortLink(34),
	swFwFCUPortSync(35),
	swFwFCUPortSignal(36),
	swFwFCUPortPe(37),
	swFwFCUPortWords(38),
	swFwFCUPortCrcs(39),
	swFwFCUPortRXPerf(40),
	swFwFCUPortTXPerf(41),
	swFwFCUPortState(42),
	swFwFOPPortLink(43),
	swFwFOPPortSync(44),
	swFwFOPPortSignal(45),
	swFwFOPPortPe(46),
	swFwFOPPortWords(47),
	swFwFOPPortCrcs(48),
	swFwFOPPortRXPerf(49),
	swFwFOPPortTXPerf(50),
	swFwFOPPortState(51),
	swFwPerfALPACRC(52),
	swFwPerfEToECRC(53),
	swFwPerfEToERxCnt(54),
	swFwPerfEToETxCnt(55),
	swFwPerffltCusDef(56),
	swFwTransceiverVoltage(57),
	swFwSecTelnetViolations(58),
	swFwSecHTTPViolations(59),
	swFwSecAPIViolations(60),
	swFwSecRSNMPViolations(61),
	swFwSecWSNMPViolations(62),
	swFwSecSESViolations(63),
	swFwSecMSViolations(64),
	swFwSecSerialViolations(65),
	swFwSecFPViolations(66),
	swFwSecSCCViolations(67),
	swFwSecDCCViolations(68),
	swFwSecLoginViolations(69),
	swFwSecInvaledTS(70),
	swFwSecInvalidSign(71),
	swFwSecInvalidCert(72),
	swFwSecSlapFail(73),
	swFwSecSlapBadPkt(74),
	swFwSecTSOutSync(75),
	swFwSecNoFcs(76),
	swFwSecIncompDB(77),
	swFwSecIllegalCmd(78),
	swFwSAMTotalDownTime(79),
	swFwSAMTotalUpTime(80),
	swFwSAMDurationOfOccur(81),
	swFwSAMFreqOfOccur(82),
	swFwResourceFlash(83)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the class type."
	::= { swFwClassAreaEntry 1 }


swFwWriteThVals OBJECT-TYPE
	SYNTAX INTEGER {
	swFwCancelWrite(1),
	swFwApplyWrite(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object is set to apply the value changes."
	::= { swFwClassAreaEntry 2 }


swFwDefaultUnit OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A Default unit string name for a threshold area."
	::= { swFwClassAreaEntry 3 }


swFwDefaultTimebase OBJECT-TYPE
	SYNTAX INTEGER {
	swFwTbNone(1),
	swFwTbSec(2),
	swFwTbMin(3),
	swFwTbHour(4),
	swFwTbDay(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A Default timebase for the current threshold counter."
	::= { swFwClassAreaEntry 4 }


swFwDefaultLow OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A Default low threshold value."
	::= { swFwClassAreaEntry 5 }


swFwDefaultHigh OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A Default high threshold value."
	::= { swFwClassAreaEntry 6 }


swFwDefaultBufSize OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A Default buffer size value."
	::= { swFwClassAreaEntry 7 }


swFwCustUnit OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A custom unit string name for a threshold area."
	::= { swFwClassAreaEntry 8 }


swFwCustTimebase OBJECT-TYPE
	SYNTAX INTEGER {
	swFwTbNone(1),
	swFwTbSec(2),
	swFwTbMin(3),
	swFwTbHour(4),
	swFwTbDay(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A custom timebase for the current threshold counter."
	::= { swFwClassAreaEntry 9 }


swFwCustLow OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A custom low threshold value."
	::= { swFwClassAreaEntry 10 }


swFwCustHigh OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A custom high threshold value."
	::= { swFwClassAreaEntry 11 }


swFwCustBufSize OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A custom buffer size value."
	::= { swFwClassAreaEntry 12 }


swFwThLevel OBJECT-TYPE
	SYNTAX INTEGER {
	swFwReserved(1),
	swFwDefault(2),
	swFwCustom(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A level where all the threshold values are set at."
	::= { swFwClassAreaEntry 13 }


swFwWriteActVals OBJECT-TYPE
	SYNTAX INTEGER {
	swFwCancelWrite(1),
	swFwApplyWrite(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object is set to apply act value changes."
	::= { swFwClassAreaEntry 14 }


swFwDefaultChangedActs OBJECT-TYPE
	SYNTAX INTEGER {
	swFwNoAction(0),
	swFwErrlog(1),
	swFwSnmptrap(2),
	swFwErrlogSnmptrap(3),
	swFwPortloglock(4),
	swFwErrlogPortloglock(5),
	swFwSnmptrapPortloglock(6),
	swFwErrlogSnmptrapPortloglock(7),
	swFwRn(8),
	swFwElRn(9),
	swFwStRn(10),
	swFwElStRn(11),
	swFwPlRn(12),
	swFwElPlRn(13),
	swFwStPlRn(14),
	swFwElStPlRn(15),
	swFwMailAlert(16),
	swFwMailAlertErrlog(17),
	swFwMailAlertSnmptrap(18),
	swFwMailAlertErrlogSnmptrap(19),
	swFwMailAlertPortloglock(20),
	swFwMailAlertErrlogPortloglock(21),
	swFwMailAlertSnmptrapPortloglock(22),
	swFwMailAlertErrlogSnmptrapPortloglock(23),
	swFwMailAlertRn(24),
	swFwElMailAlertRn(25),
	swFwMailAlertStRn(26),
	swFwMailAlertElStRn(27),
	swFwMailAlertPlRn(28),
	swFwMailAlertElPlRn(29),
	swFwMailAlertStPlRn(30),
	swFwMailAlertElStPlRn(31)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Default action matrix for changed event."
	::= { swFwClassAreaEntry 15 }


swFwDefaultExceededActs OBJECT-TYPE
	SYNTAX INTEGER {
	swFwNoAction(0),
	swFwErrlog(1),
	swFwSnmptrap(2),
	swFwErrlogSnmptrap(3),
	swFwPortloglock(4),
	swFwErrlogPortloglock(5),
	swFwSnmptrapPortloglock(6),
	swFwErrlogSnmptrapPortloglock(7),
	swFwRn(8),
	swFwElRn(9),
	swFwStRn(10),
	swFwElStRn(11),
	swFwPlRn(12),
	swFwElPlRn(13),
	swFwStPlRn(14),
	swFwElStPlRn(15),
	swFwMailAlert(16),
	swFwMailAlertErrlog(17),
	swFwMailAlertSnmptrap(18),
	swFwMailAlertErrlogSnmptrap(19),
	swFwMailAlertPortloglock(20),
	swFwMailAlertErrlogPortloglock(21),
	swFwMailAlertSnmptrapPortloglock(22),
	swFwMailAlertErrlogSnmptrapPortloglock(23),
	swFwMailAlertRn(24),
	swFwElMailAlertRn(25),
	swFwMailAlertStRn(26),
	swFwMailAlertElStRn(27),
	swFwMailAlertPlRn(28),
	swFwMailAlertElPlRn(29),
	swFwMailAlertStPlRn(30),
	swFwMailAlertElStPlRn(31)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Default action matrix for exceeded event."
	::= { swFwClassAreaEntry 16 }


swFwDefaultBelowActs OBJECT-TYPE
	SYNTAX INTEGER {
	swFwNoAction(0),
	swFwErrlog(1),
	swFwSnmptrap(2),
	swFwErrlogSnmptrap(3),
	swFwPortloglock(4),
	swFwErrlogPortloglock(5),
	swFwSnmptrapPortloglock(6),
	swFwErrlogSnmptrapPortloglock(7),
	swFwRn(8),
	swFwElRn(9),
	swFwStRn(10),
	swFwElStRn(11),
	swFwPlRn(12),
	swFwElPlRn(13),
	swFwStPlRn(14),
	swFwElStPlRn(15),
	swFwMailAlert(16),
	swFwMailAlertErrlog(17),
	swFwMailAlertSnmptrap(18),
	swFwMailAlertErrlogSnmptrap(19),
	swFwMailAlertPortloglock(20),
	swFwMailAlertErrlogPortloglock(21),
	swFwMailAlertSnmptrapPortloglock(22),
	swFwMailAlertErrlogSnmptrapPortloglock(23),
	swFwMailAlertRn(24),
	swFwElMailAlertRn(25),
	swFwMailAlertStRn(26),
	swFwMailAlertElStRn(27),
	swFwMailAlertPlRn(28),
	swFwMailAlertElPlRn(29),
	swFwMailAlertStPlRn(30),
	swFwMailAlertElStPlRn(31)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Default action matrix for below event."
	::= { swFwClassAreaEntry 17 }


swFwDefaultAboveActs OBJECT-TYPE
	SYNTAX INTEGER {
	swFwNoAction(0),
	swFwErrlog(1),
	swFwSnmptrap(2),
	swFwErrlogSnmptrap(3),
	swFwPortloglock(4),
	swFwErrlogPortloglock(5),
	swFwSnmptrapPortloglock(6),
	swFwErrlogSnmptrapPortloglock(7),
	swFwRn(8),
	swFwElRn(9),
	swFwStRn(10),
	swFwElStRn(11),
	swFwPlRn(12),
	swFwElPlRn(13),
	swFwStPlRn(14),
	swFwElStPlRn(15),
	swFwMailAlert(16),
	swFwMailAlertErrlog(17),
	swFwMailAlertSnmptrap(18),
	swFwMailAlertErrlogSnmptrap(19),
	swFwMailAlertPortloglock(20),
	swFwMailAlertErrlogPortloglock(21),
	swFwMailAlertSnmptrapPortloglock(22),
	swFwMailAlertErrlogSnmptrapPortloglock(23),
	swFwMailAlertRn(24),
	swFwElMailAlertRn(25),
	swFwMailAlertStRn(26),
	swFwMailAlertElStRn(27),
	swFwMailAlertPlRn(28),
	swFwMailAlertElPlRn(29),
	swFwMailAlertStPlRn(30),
	swFwMailAlertElStPlRn(31)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Default action matrix for above event."
	::= { swFwClassAreaEntry 18 }


swFwDefaultInBetweenActs OBJECT-TYPE
	SYNTAX INTEGER {
	swFwNoAction(0),
	swFwErrlog(1),
	swFwSnmptrap(2),
	swFwErrlogSnmptrap(3),
	swFwPortloglock(4),
	swFwErrlogPortloglock(5),
	swFwSnmptrapPortloglock(6),
	swFwErrlogSnmptrapPortloglock(7),
	swFwRn(8),
	swFwElRn(9),
	swFwStRn(10),
	swFwElStRn(11),
	swFwPlRn(12),
	swFwElPlRn(13),
	swFwStPlRn(14),
	swFwElStPlRn(15),
	swFwMailAlert(16),
	swFwMailAlertErrlog(17),
	swFwMailAlertSnmptrap(18),
	swFwMailAlertErrlogSnmptrap(19),
	swFwMailAlertPortloglock(20),
	swFwMailAlertErrlogPortloglock(21),
	swFwMailAlertSnmptrapPortloglock(22),
	swFwMailAlertErrlogSnmptrapPortloglock(23),
	swFwMailAlertRn(24),
	swFwElMailAlertRn(25),
	swFwMailAlertStRn(26),
	swFwMailAlertElStRn(27),
	swFwMailAlertPlRn(28),
	swFwMailAlertElPlRn(29),
	swFwMailAlertStPlRn(30),
	swFwMailAlertElStPlRn(31)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Default action matrix for in-between event."
	::= { swFwClassAreaEntry 19 }


swFwCustChangedActs OBJECT-TYPE
	SYNTAX INTEGER {
	swFwNoAction(0),
	swFwErrlog(1),
	swFwSnmptrap(2),
	swFwErrlogSnmptrap(3),
	swFwPortloglock(4),
	swFwErrlogPortloglock(5),
	swFwSnmptrapPortloglock(6),
	swFwErrlogSnmptrapPortloglock(7),
	swFwRn(8),
	swFwElRn(9),
	swFwStRn(10),
	swFwElStRn(11),
	swFwPlRn(12),
	swFwElPlRn(13),
	swFwStPlRn(14),
	swFwElStPlRn(15),
	swFwMailAlert(16),
	swFwMailAlertErrlog(17),
	swFwMailAlertSnmptrap(18),
	swFwMailAlertErrlogSnmptrap(19),
	swFwMailAlertPortloglock(20),
	swFwMailAlertErrlogPortloglock(21),
	swFwMailAlertSnmptrapPortloglock(22),
	swFwMailAlertErrlogSnmptrapPortloglock(23),
	swFwMailAlertRn(24),
	swFwElMailAlertRn(25),
	swFwMailAlertStRn(26),
	swFwMailAlertElStRn(27),
	swFwMailAlertPlRn(28),
	swFwMailAlertElPlRn(29),
	swFwMailAlertStPlRn(30),
	swFwMailAlertElStPlRn(31)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "custom action matrix for changed event."
	::= { swFwClassAreaEntry 20 }


swFwCustExceededActs OBJECT-TYPE
	SYNTAX INTEGER {
	swFwNoAction(0),
	swFwErrlog(1),
	swFwSnmptrap(2),
	swFwErrlogSnmptrap(3),
	swFwPortloglock(4),
	swFwErrlogPortloglock(5),
	swFwSnmptrapPortloglock(6),
	swFwErrlogSnmptrapPortloglock(7),
	swFwRn(8),
	swFwElRn(9),
	swFwStRn(10),
	swFwElStRn(11),
	swFwPlRn(12),
	swFwElPlRn(13),
	swFwStPlRn(14),
	swFwElStPlRn(15),
	swFwMailAlert(16),
	swFwMailAlertErrlog(17),
	swFwMailAlertSnmptrap(18),
	swFwMailAlertErrlogSnmptrap(19),
	swFwMailAlertPortloglock(20),
	swFwMailAlertErrlogPortloglock(21),
	swFwMailAlertSnmptrapPortloglock(22),
	swFwMailAlertErrlogSnmptrapPortloglock(23),
	swFwMailAlertRn(24),
	swFwElMailAlertRn(25),
	swFwMailAlertStRn(26),
	swFwMailAlertElStRn(27),
	swFwMailAlertPlRn(28),
	swFwMailAlertElPlRn(29),
	swFwMailAlertStPlRn(30),
	swFwMailAlertElStPlRn(31)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "custom action matrix for exceeded event."
	::= { swFwClassAreaEntry 21 }


swFwCustBelowActs OBJECT-TYPE
	SYNTAX INTEGER {
	swFwNoAction(0),
	swFwErrlog(1),
	swFwSnmptrap(2),
	swFwErrlogSnmptrap(3),
	swFwPortloglock(4),
	swFwErrlogPortloglock(5),
	swFwSnmptrapPortloglock(6),
	swFwErrlogSnmptrapPortloglock(7),
	swFwRn(8),
	swFwElRn(9),
	swFwStRn(10),
	swFwElStRn(11),
	swFwPlRn(12),
	swFwElPlRn(13),
	swFwStPlRn(14),
	swFwElStPlRn(15),
	swFwMailAlert(16),
	swFwMailAlertErrlog(17),
	swFwMailAlertSnmptrap(18),
	swFwMailAlertErrlogSnmptrap(19),
	swFwMailAlertPortloglock(20),
	swFwMailAlertErrlogPortloglock(21),
	swFwMailAlertSnmptrapPortloglock(22),
	swFwMailAlertErrlogSnmptrapPortloglock(23),
	swFwMailAlertRn(24),
	swFwElMailAlertRn(25),
	swFwMailAlertStRn(26),
	swFwMailAlertElStRn(27),
	swFwMailAlertPlRn(28),
	swFwMailAlertElPlRn(29),
	swFwMailAlertStPlRn(30),
	swFwMailAlertElStPlRn(31)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "custom action matrix for below event."
	::= { swFwClassAreaEntry 22 }


swFwCustAboveActs OBJECT-TYPE
	SYNTAX INTEGER {
	swFwNoAction(0),
	swFwErrlog(1),
	swFwSnmptrap(2),
	swFwErrlogSnmptrap(3),
	swFwPortloglock(4),
	swFwErrlogPortloglock(5),
	swFwSnmptrapPortloglock(6),
	swFwErrlogSnmptrapPortloglock(7),
	swFwRn(8),
	swFwElRn(9),
	swFwStRn(10),
	swFwElStRn(11),
	swFwPlRn(12),
	swFwElPlRn(13),
	swFwStPlRn(14),
	swFwElStPlRn(15),
	swFwMailAlert(16),
	swFwMailAlertErrlog(17),
	swFwMailAlertSnmptrap(18),
	swFwMailAlertErrlogSnmptrap(19),
	swFwMailAlertPortloglock(20),
	swFwMailAlertErrlogPortloglock(21),
	swFwMailAlertSnmptrapPortloglock(22),
	swFwMailAlertErrlogSnmptrapPortloglock(23),
	swFwMailAlertRn(24),
	swFwElMailAlertRn(25),
	swFwMailAlertStRn(26),
	swFwMailAlertElStRn(27),
	swFwMailAlertPlRn(28),
	swFwMailAlertElPlRn(29),
	swFwMailAlertStPlRn(30),
	swFwMailAlertElStPlRn(31)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "custom action matrix for above event."
	::= { swFwClassAreaEntry 23 }


swFwCustInBetweenActs OBJECT-TYPE
	SYNTAX INTEGER {
	swFwNoAction(0),
	swFwErrlog(1),
	swFwSnmptrap(2),
	swFwErrlogSnmptrap(3),
	swFwPortloglock(4),
	swFwErrlogPortloglock(5),
	swFwSnmptrapPortloglock(6),
	swFwErrlogSnmptrapPortloglock(7),
	swFwRn(8),
	swFwElRn(9),
	swFwStRn(10),
	swFwElStRn(11),
	swFwPlRn(12),
	swFwElPlRn(13),
	swFwStPlRn(14),
	swFwElStPlRn(15),
	swFwMailAlert(16),
	swFwMailAlertErrlog(17),
	swFwMailAlertSnmptrap(18),
	swFwMailAlertErrlogSnmptrap(19),
	swFwMailAlertPortloglock(20),
	swFwMailAlertErrlogPortloglock(21),
	swFwMailAlertSnmptrapPortloglock(22),
	swFwMailAlertErrlogSnmptrapPortloglock(23),
	swFwMailAlertRn(24),
	swFwElMailAlertRn(25),
	swFwMailAlertStRn(26),
	swFwMailAlertElStRn(27),
	swFwMailAlertPlRn(28),
	swFwMailAlertElPlRn(29),
	swFwMailAlertStPlRn(30),
	swFwMailAlertElStPlRn(31)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "custom action matrix for in-between event."
	::= { swFwClassAreaEntry 24 }


swFwValidActs OBJECT-TYPE
	SYNTAX INTEGER {
	swFwNoAction(0),
	swFwErrlog(1),
	swFwSnmptrap(2),
	swFwErrlogSnmptrap(3),
	swFwPortloglock(4),
	swFwErrlogPortloglock(5),
	swFwSnmptrapPortloglock(6),
	swFwErrlogSnmptrapPortloglock(7),
	swFwRn(8),
	swFwElRn(9),
	swFwStRn(10),
	swFwElStRn(11),
	swFwPlRn(12),
	swFwElPlRn(13),
	swFwStPlRn(14),
	swFwElStPlRn(15),
	swFwMailAlert(16),
	swFwMailAlertErrlog(17),
	swFwMailAlertSnmptrap(18),
	swFwMailAlertErrlogSnmptrap(19),
	swFwMailAlertPortloglock(20),
	swFwMailAlertErrlogPortloglock(21),
	swFwMailAlertSnmptrapPortloglock(22),
	swFwMailAlertErrlogSnmptrapPortloglock(23),
	swFwMailAlertRn(24),
	swFwElMailAlertRn(25),
	swFwMailAlertStRn(26),
	swFwMailAlertElStRn(27),
	swFwMailAlertPlRn(28),
	swFwMailAlertElPlRn(29),
	swFwMailAlertStPlRn(30),
	swFwMailAlertElStPlRn(31)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "matrix of valid acts for an class/area."
	::= { swFwClassAreaEntry 25 }


swFwActLevel OBJECT-TYPE
	SYNTAX INTEGER {
	swFwReserved(1),
	swFwDefault(2),
	swFwCustom(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A level where all the actions are set at."
	::= { swFwClassAreaEntry 26 }


swFwThresholdTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SwFwThresholdEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The table of individual thresholds."
	::= { swFwSystem 3 }


swFwThresholdEntry OBJECT-TYPE
	SYNTAX SwFwThresholdEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry of an individual threshold."
	INDEX { swFwClassAreaIndex , swFwThresholdIndex }

	::= { swFwThresholdTable 1 }

swFwThresholdEntry ::=
	SEQUENCE {
		swFwThresholdIndex Integer32,
		swFwStatus SwFwStatus,
		swFwName DisplayString(SIZE(0..32)),
		swFwLabel DisplayString(SIZE(0..70)),
		swFwCurVal Integer32,
		swFwLastEvent SwFwEvent,
		swFwLastEventVal Integer32,
		swFwLastEventTime DisplayString(SIZE(0..32)),
		swFwLastState SwFwState,
		swFwBehaviorType SwFwBehavior,
		swFwBehaviorInt Integer32,
		swFwLastSeverityLevel SwSevType
		}

swFwThresholdIndex OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the element index of
an threshold."
	::= { swFwThresholdEntry 1 }


swFwStatus OBJECT-TYPE
	SYNTAX INTEGER {
	disabled(1),
	enabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies if an threshold is
enabled or disabled."
	::= { swFwThresholdEntry 2 }


swFwName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..32))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object is a name of the threshold."
	::= { swFwThresholdEntry 3 }


swFwLabel OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..70))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object is a label of the threshold."
	::= { swFwThresholdEntry 4 }


swFwCurVal OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object is a current counter of the threshold."
	::= { swFwThresholdEntry 5 }


swFwLastEvent OBJECT-TYPE
	SYNTAX INTEGER {
	started(1),
	changed(2),
	exceeded(3),
	below(4),
	above(5),
	inBetween(6)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object is a last event type of the threshold."
	::= { swFwThresholdEntry 6 }


swFwLastEventVal OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object is a last event value of the threshold."
	::= { swFwThresholdEntry 7 }


swFwLastEventTime OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..32))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object is a last event time of the threshold."
	::= { swFwThresholdEntry 8 }


swFwLastState OBJECT-TYPE
	SYNTAX INTEGER {
	swFwInformative(1),
	swFwNormal(2),
	swFwFaulty(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object is a last event state of the threshold."
	::= { swFwThresholdEntry 9 }


swFwBehaviorType OBJECT-TYPE
	SYNTAX INTEGER {
	triggered(1),
	continuous(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A behavior of which the thresholds generate event."
	::= { swFwThresholdEntry 10 }


swFwBehaviorInt OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A integer of which the thresholds generate continuous event."
	::= { swFwThresholdEntry 11 }


swFwLastSeverityLevel OBJECT-TYPE
	SYNTAX INTEGER {
	none(0),
	critical(1),
	error(2),
	warning(3),
	informational(4),
	debug(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object is a last event severity level of the threshold."
	::= { swFwThresholdEntry 12 }


swEndDeviceRlsTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SwEndDeviceRlsEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The table of individual end devices' rls."
	::= { swEndDevice 1 }


swEndDeviceRlsEntry OBJECT-TYPE
	SYNTAX SwEndDeviceRlsEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry of an individual end devices' rls."
	INDEX { swEndDevicePort , swEndDeviceAlpa }

	::= { swEndDeviceRlsTable 1 }

swEndDeviceRlsEntry ::=
	SEQUENCE {
		swEndDevicePort Integer32,
		swEndDeviceAlpa Integer32,
		swEndDevicePortID OCTET STRING,
		swEndDeviceLinkFailure Integer32,
		swEndDeviceSyncLoss Integer32,
		swEndDeviceSigLoss Integer32,
		swEndDeviceProtoErr Integer32,
		swEndDeviceInvalidWord Integer32,
		swEndDeviceInvalidCRC Integer32
		}

swEndDevicePort OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the port of the end device."
	::= { swEndDeviceRlsEntry 1 }


swEndDeviceAlpa OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the alpa of the end device."
	::= { swEndDeviceRlsEntry 2 }


swEndDevicePortID OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(4))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The object identifies the Fibre Channel port address
ID of the entry."
	::= { swEndDeviceRlsEntry 3 }


swEndDeviceLinkFailure OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Link failure count for the end device."
	::= { swEndDeviceRlsEntry 4 }


swEndDeviceSyncLoss OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Sync loss count for the end device."
	::= { swEndDeviceRlsEntry 5 }


swEndDeviceSigLoss OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Sig loss count for the end device."
	::= { swEndDeviceRlsEntry 6 }


swEndDeviceProtoErr OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Protocol err count for the end device."
	::= { swEndDeviceRlsEntry 7 }


swEndDeviceInvalidWord OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Invalid word count for the end device."
	::= { swEndDeviceRlsEntry 8 }


swEndDeviceInvalidCRC OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Invalid CRC count for the end device."
	::= { swEndDeviceRlsEntry 9 }


swGroupTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SwGroupEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The table of groups. This may not be available
on all versions of Fabric OS."
	::= { swGroup 1 }


swGroupEntry OBJECT-TYPE
	SYNTAX SwGroupEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry of table of groups."
	INDEX { swGroupIndex  }

	::= { swGroupTable 1 }

swGroupEntry ::=
	SEQUENCE {
		swGroupIndex Integer32,
		swGroupName OCTET STRING,
		swGroupType OCTET STRING
		}

swGroupIndex OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object is the group index starting from 1."
	::= { swGroupEntry 1 }


swGroupName OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..32))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the name of the group."
	::= { swGroupEntry 2 }


swGroupType OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..15))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the type of the group."
	::= { swGroupEntry 3 }


swGroupMemTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SwGroupMemEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The table of members of all groups. This may not
be available on all versions of Fabric OS."
	::= { swGroup 2 }


swGroupMemEntry OBJECT-TYPE
	SYNTAX SwGroupMemEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry for a member of a group."
	INDEX { swGroupId , swGroupMemWwn }

	::= { swGroupMemTable 1 }

swGroupMemEntry ::=
	SEQUENCE {
		swGroupId Integer32,
		swGroupMemWwn FcWwn,
		swGroupMemPos Integer32
		}

swGroupId OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the Group Id  of the
member switch."
	::= { swGroupMemEntry 1 }


swGroupMemWwn OBJECT-TYPE
	SYNTAX FcWwn
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the WWN of the member switch."
	::= { swGroupMemEntry 2 }


swGroupMemPos OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies position of the member
switch in the group. This is based on the order
that the switches were added in the group."
	::= { swGroupMemEntry 3 }


swBlmPerfALPAMntTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SwBlmPerfALPAMntEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ALPA monitoring counter Table. "
	::= { swBlmPerfMnt 1 }


swBlmPerfALPAMntEntry OBJECT-TYPE
	SYNTAX SwBlmPerfALPAMntEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION " ALPA monitoring counter for given ALPA."
	INDEX { swBlmPerfAlpaPort , swBlmPerfAlpaIndx }

	::= { swBlmPerfALPAMntTable 1 }

swBlmPerfALPAMntEntry ::=
	SEQUENCE {
		swBlmPerfAlpaPort SwPortIndex,
		swBlmPerfAlpaIndx Integer32,
		swBlmPerfAlpa Integer32,
		swBlmPerfAlpaCRCCnt OCTET STRING
		}

swBlmPerfAlpaPort OBJECT-TYPE
	SYNTAX SwPortIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION " This Object identifies the port index of the switch."
	::= { swBlmPerfALPAMntEntry 1 }


swBlmPerfAlpaIndx OBJECT-TYPE
	SYNTAX INTEGER (1..126)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION " This Object identifies the ALPA index. There can be 126 ALPA values"
	::= { swBlmPerfALPAMntEntry 2 }


swBlmPerfAlpa OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION " This Object identifies the ALPA values. These values
range between x'01' and x'EF'(1 to 239). ALPA value x'00'
is reserved for FL_Port
If Alpa device is invalid, then it will have -1 value.  "
	::= { swBlmPerfALPAMntEntry 3 }


swBlmPerfAlpaCRCCnt OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(8))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Get CRC count for given ALPA and port. This monitoring
provides information on the number of CRC errors
occurred on the frames destined to each possible ALPA
attached to a specific port."
	::= { swBlmPerfALPAMntEntry 4 }


swBlmPerfEEMntTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SwBlmPerfEEMntEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION " End-to-End  monitoring counter Table"
	::= { swBlmPerfMnt 2 }


swBlmPerfEEMntEntry OBJECT-TYPE
	SYNTAX SwBlmPerfEEMntEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "End-to-End monitoring counter for given port."
	INDEX { swBlmPerfEEPort , swBlmPerfEERefKey }

	::= { swBlmPerfEEMntTable 1 }

swBlmPerfEEMntEntry ::=
	SEQUENCE {
		swBlmPerfEEPort SwPortIndex,
		swBlmPerfEERefKey Integer32,
		swBlmPerfEECRC OCTET STRING,
		swBlmPerfEEFCWRx OCTET STRING,
		swBlmPerfEEFCWTx OCTET STRING,
		swBlmPerfEESid Integer32,
		swBlmPerfEEDid Integer32
		}

swBlmPerfEEPort OBJECT-TYPE
	SYNTAX SwPortIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION " This object identifies the port number of the switch."
	::= { swBlmPerfEEMntEntry 1 }


swBlmPerfEERefKey OBJECT-TYPE
	SYNTAX INTEGER (1..8)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the reference number
of the counter. This reference is  number assigned
when a filter is created. In SNMP Index start one
instead of 0, add one to actual ref key"
	::= { swBlmPerfEEMntEntry 2 }


swBlmPerfEECRC OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(8))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION " Get End to End CRC error for the frames that matched
the SID-DID pair."
	::= { swBlmPerfEEMntEntry 3 }


swBlmPerfEEFCWRx OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(8))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Get End to End count of Fibre Channel words (FCW),
received by the port, that matched
the SID-DID pair. "
	::= { swBlmPerfEEMntEntry 4 }


swBlmPerfEEFCWTx OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(8))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Get End to End count of Fibre Channel words (FCW),
transmitted by the port, that matched the SID-DID pair. "
	::= { swBlmPerfEEMntEntry 5 }


swBlmPerfEESid OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION " Gets SID info by reference number. SID (Source Identifier)
is a 3-byte field in the frame header used to indicate the
address identifier of the N-Port from which the frame was sent."
	::= { swBlmPerfEEMntEntry 6 }


swBlmPerfEEDid OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Gets DID info by reference number.
DID (Destination Identifier) is a 3-byte field in the
frame header used to indicate the address identifier of 
the N-Port to which the frame was sent."
	::= { swBlmPerfEEMntEntry 7 }


swBlmPerfFltMntTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SwBlmPerfFltMntEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Filter based monitoring counter."
	::= { swBlmPerfMnt 3 }


swBlmPerfFltMntEntry OBJECT-TYPE
	SYNTAX SwBlmPerfFltMntEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION " Filter base monitoring counter for given port."
	INDEX { swBlmPerfFltPort , swBlmPerfFltRefkey }

	::= { swBlmPerfFltMntTable 1 }

swBlmPerfFltMntEntry ::=
	SEQUENCE {
		swBlmPerfFltPort SwPortIndex,
		swBlmPerfFltRefkey Integer32,
		swBlmPerfFltCnt OCTET STRING,
		swBlmPerfFltAlias DisplayString(SIZE(0..20))
		}

swBlmPerfFltPort OBJECT-TYPE
	SYNTAX SwPortIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the port number of the switch."
	::= { swBlmPerfFltMntEntry 1 }


swBlmPerfFltRefkey OBJECT-TYPE
	SYNTAX INTEGER (1..8)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION " This object identifies the reference number of the filter.
This reference number is assigned when a filter is created.
In SNMP Index start one instead of 0, add one to actual ref key"
	::= { swBlmPerfFltMntEntry 2 }


swBlmPerfFltCnt OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(8))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Get statistics of filter based monitor.
Filter based monitoring provides information
about a filter hit count such as
1.  Read command
2.  SCSI or IP traffic
3.  SCSI Read/Write"
	::= { swBlmPerfFltMntEntry 3 }


swBlmPerfFltAlias OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..20))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION " Alias name for the filter."
	::= { swBlmPerfFltMntEntry 4 }


swSwitchTrunkable OBJECT-TYPE
	SYNTAX INTEGER {
	yes(8),
	no(0)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The trunking status of the switch - whether the switch supports the trunking feature or not. The values are
yes(8) - the trunking feature is supported
no(0). - the trunking feature is not supported. "
	::= { swTrunk 1 }


swTrunkTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SwTrunkEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION " Table to display trunking information for the switch. "
	::= { swTrunk 2 }


swTrunkEntry OBJECT-TYPE
	SYNTAX SwTrunkEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry for the trunking table."
	INDEX { swTrunkPortIndex  }

	::= { swTrunkTable 1 }

swTrunkEntry ::=
	SEQUENCE {
		swTrunkPortIndex SwPortIndex,
		swTrunkGroupNumber Integer32,
		swTrunkMaster SwTrunkMaster,
		swPortTrunked INTEGER
		}

swTrunkPortIndex OBJECT-TYPE
	SYNTAX SwPortIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the switch port index.
Note that the value of a port index is 1 higher than the
port number labeled on the front panel.
e.g. port index 1 correspond to port number 0. "
	::= { swTrunkEntry 1 }


swTrunkGroupNumber OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object is a logical entity which specifies 
the Group Number to which the port belongs to.
If this value is Zero it means the port is not Trunked."
	::= { swTrunkEntry 2 }


swTrunkMaster OBJECT-TYPE
	SYNTAX SwTrunkMaster
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Port number that is the trunk master of the group. 
The trunk master implicitly defines the group. 
All ports with the same master are considered to be part of the same group."
	::= { swTrunkEntry 3 }


swPortTrunked OBJECT-TYPE
	SYNTAX INTEGER {
	disabled(0),
	enabled(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current state of trunking for a member port.
Values are enabled(1) or disabled(0)."
	::= { swTrunkEntry 4 }


swTrunkGrpTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SwTrunkGrpEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Table to display trunking Performance
information for the switch."
	::= { swTrunk 3 }


swTrunkGrpEntry OBJECT-TYPE
	SYNTAX SwTrunkGrpEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry for the trunking Group table."
	INDEX { swTrunkGrpNumber  }

	::= { swTrunkGrpTable 1 }

swTrunkGrpEntry ::=
	SEQUENCE {
		swTrunkGrpNumber Integer32,
		swTrunkGrpMaster SwTrunkMaster,
		swTrunkGrpTx OCTET STRING,
		swTrunkGrpRx OCTET STRING
		}

swTrunkGrpNumber OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object is a logical entity which
specifies the Group Number to which port 
belongs to."
	::= { swTrunkGrpEntry 1 }


swTrunkGrpMaster OBJECT-TYPE
	SYNTAX SwTrunkMaster
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object gives the master port id
for the TrunkGroup."
	::= { swTrunkGrpEntry 2 }


swTrunkGrpTx OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(8))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Gives the aggregate value of the    
transmitted words from this TrunkGroup."
	::= { swTrunkGrpEntry 3 }


swTrunkGrpRx OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(8))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Gives the aggregate value of the  
received words by this TrunkGroup."
	::= { swTrunkGrpEntry 4 }


swTrapsV2 OBJECT IDENTIFIER ::= { sw 0 }

swFault TRAP-TYPE
	ENTERPRISE sw
	VARIABLES { swDiagResult, swSsn, swGroupName, swGroupType, swGroupMemPos }
	--#TYPE		"Switch is faulty."
	--#SUMMARY	"Faulty reason: %d and SSN is #%s,GroupName %s,GroupType %s,GroupMemPosition %d""
	--#ARGUMENTS	{ 0, 1, 2, 3, 4}
	--#SEVERITY	CRITICAL
	--#TIMEINDEX	1
	--#STATE	NONOPERATIONAL
DESCRIPTION "Obsoleted this trap as firmware doesn't support this trap. A swFault(1) is generated whenever the diagnostics detects a fault with the switch."
	::= 1


swSensorScn TRAP-TYPE
	ENTERPRISE sw
	VARIABLES { swSensorStatus, swSensorIndex, swSensorType, swSensorValue, swSensorInfo, swSsn, swGroupName, swGroupType, swGroupMemPos }
	--#TYPE		"A sensor (temperature, fan, etc.) changed its operational state."
	--#SUMMARY	"%s: is currently in state %d and SSN is #%s GroupName %s,GroupType %s,GroupMemPosition %d"
	--#ARGUMENTS	{ 4, 0, 5, 6, 7, 8 }
	--#SEVERITY	INFORMATIONAL
	--#TIMEINDEX	1
	--#STATE	OPERATIONAL
DESCRIPTION "A swSensorScn(2) is generated whenever an environment sensor changes its operational state. For instance, a fan stop working. The VarBind in the Trap Data Unit shall contain the corresponding instance of the sensor status, sensor index, sensor type, sensor value (reading) and sensor information. Note that the sensor information contains the type of sensor and its number in textual format."
	::= 2


swFCPortScn TRAP-TYPE
	ENTERPRISE sw
	VARIABLES { swFCPortOpStatus, swFCPortIndex, swFCPortName, swSsn, swGroupName, swGroupType, swGroupMemPos }
	--#TYPE		"A Fibre Channel Port changed its operational state."
	--#SUMMARY	"Port Index %d changed state to %d  Port Name: %s and SSN is #%s, GroupName %s,GroupType %s,GroupMemPosition %d"
	--#ARGUMENTS	{ 1, 0, 2, 3, 4, 5, 6 }
	--#SEVERITY	INFORMATIONAL
	--#TIMEINDEX	1
	--#STATE	OPERATIONAL
DESCRIPTION "A swFCPortScn(3) is generated whenever an FC_Port changes its operational state. For instance, the FC_Port goes from on-line to offline. The VarBind in the Trap Data Unit shall contain the corresponding instance of the FC_Port's operational status, index, swFCPortName and swSsn. swFCPortName, swSsn are optional."
	::= 3


swEventTrap TRAP-TYPE
	ENTERPRISE sw
	VARIABLES { swEventIndex, swEventTimeInfo, swEventLevel, swEventRepeatCount, swEventDescr, swSsn, swGroupName, swGroupType, swGroupMemPos }
	--#TYPE		"A firmware event has been logged"
	--#SUMMARY	"Event %d: %s (severity level %d)  %s SSN is #%s GroupName %s,GroupType %s,GroupMemPosition %d"
	--#ARGUMENTS	{ 0, 1, 2, 4, 5, 6, 7, 8}
	--#SEVERITY	INFORMATIONAL
	--#TIMEINDEX	1
	--#STATE	OPERATIONAL
DESCRIPTION "This trap is generated when an event whose level at or below swEventTrapLevel occurs."
	::= 4


swFabricWatchTrap TRAP-TYPE
	ENTERPRISE sw
	VARIABLES { swFwClassAreaIndex, swFwThresholdIndex, swFwName, swFwLabel, swFwLastEventVal, swFwLastEventTime, swFwLastEvent, swFwLastState, swFwLastSeverityLevel, swSsn, swGroupName, swGroupType, swGroupMemPos }
	--#TYPE		"Fabric Watch has generated an event"
	--#SUMMARY	"Threshold %s in Class/Area %d at index %d has generated event %d with %d on %s. This event is %d. This event label is %d, event severity level is %d and SSN is #%s, GroupName %s,GroupType %s,GroupMemPosition %d"
	--#ARGUMENTS	{ 2, 0, 1, 6, 4, 5, 7, 3, 8, 9, 10, 11, 12}
	--#SEVERITY	WARNING
	--#TIMEINDEX	1
	--#STATE	OPERATIONAL
DESCRIPTION "trap to be sent by Fabric Watch to notify of an event"
	::= 5


swTrackChangesTrap TRAP-TYPE
	ENTERPRISE sw
	VARIABLES { swTrackChangesInfo, swSsn, swGroupName, swGroupType, swGroupMemPos }
	--#TYPE		"Track changes has generated a trap"
	--#SUMMARY	"%s and SSN is #%s, GroupName %s,GroupType %s,GroupMemPosition %d"
	--#ARGUMENTS	{ 0, 1, 2, 3, 4  }
	--#SEVERITY	INFORMATIONAL
	--#TIMEINDEX	1
	--#STATE	OPERATIONAL
DESCRIPTION "trap to be sent for tracking login/logout/config changes"
	::= 6


END