#-MIBFILE: mlxraid.mib

MYLEXRAID-MIB DEFINITIONS ::= BEGIN


DisplayString ::=
	OCTET STRING

PhysAddress ::=
	OCTET STRING

DmiCounter ::=
	Counter

DmiInteger ::=
	INTEGER

DmiDisplaystring ::=
	DisplayString

DmiDate ::=
	OCTET STRING (SIZE(28))

DmiComponentIndex ::=
	INTEGER

mylex OBJECT IDENTIFIER ::= { enterprises 1608 }

dmtfStd OBJECT IDENTIFIER ::= { mylex 1 }

dmtfComponents OBJECT IDENTIFIER ::= { dmtfStd 1 }

dmtfGroups OBJECT IDENTIFIER ::= { dmtfComponents 1 }

tControllerInformation OBJECT-TYPE
	SYNTAX SEQUENCE OF SControllerInformation
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This group provides Controller Information."
	::= { dmtfGroups 2 }


eControllerInformation OBJECT-TYPE
	SYNTAX SControllerInformation
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION ""
	INDEX { a2ControllerNumber  }

	::= { tControllerInformation 1 }


a2ControllerNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Controller Number assigned to this controller by the device
driver."
	::= { eControllerInformation 1 }


a2OperationalState OBJECT-TYPE
	SYNTAX INTEGER {
	vFunctional(1),
	vNon-functional(2),
	vNotPresent(128)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Operational state of this controller as seen by the device
driver."
	::= { eControllerInformation 2 }


a2FirmwareRevision OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Controller Firmware Revision."
	::= { eControllerInformation 3 }


a2ConfiguredChannels OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Channels (SCSI Bus) that are part of controller
configuration."
	::= { eControllerInformation 4 }


a2ActualChannels OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Channels (SCSI Bus) that are physically present
on-board the controller."
	::= { eControllerInformation 5 }


a2MaximumLogicalDrives OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Maximum number of logical drives that can be configured on
this controller."
	::= { eControllerInformation 6 }


a2MaximumTargetsPerChannel OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Maximum Number of SCSI Target IDs supported per SCSI Bus."
	::= { eControllerInformation 7 }


a2MaximumTaggedRequests OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Maximum Number of Tagged requests that may be sent to a Hard
disk device by Controller Firmware."
	::= { eControllerInformation 8 }


a2MaximumDataTransferSizePerIoRequestInK OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Maximum amount of data that can be transferred per a single
IO request - in KB."
	::= { eControllerInformation 9 }


a2MaximumConcurrentCommands OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Maximum number of requests that can be sent to the controller
simultaneouly."
	::= { eControllerInformation 10 }


a2RebuildRate OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Value of Rebuild Rate."
	::= { eControllerInformation 11 }


a2LogicalSectorSizeInBytes OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Logical Sector Size in Bytes (Default: 512 bytes)."
	::= { eControllerInformation 12 }


a2PhysicalSectorSizeInBytes OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Physical Sector Size in Bytes (Default: 512 bytes)."
	::= { eControllerInformation 13 }


a2CacheLineSizeInBytes OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Cache Line Size in Bytes."
	::= { eControllerInformation 14 }


a2CacheSizeInMb OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Size of Controller Cache Module - in MB."
	::= { eControllerInformation 15 }


a2CacheMemoryType OBJECT-TYPE
	SYNTAX INTEGER {
	vDram(1),
	vEdram(2),
	vEdo(3),
	vDram-parity(65),
	vEdram-parity(66),
	vEdo-parity(67),
	vDram-ecc(129),
	vEdram-ecc(130),
	vEdo-ecc(131),
	vUnknown(255)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Controller Cache Memory Type."
	::= { eControllerInformation 16 }


a2EpromSizeInKb OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Size of Controller EPROM Module - in KB."
	::= { eControllerInformation 17 }


a2BusType OBJECT-TYPE
	SYNTAX INTEGER {
	vEisa(1),
	vMca(2),
	vPci(3),
	vVesa(4),
	vIsa(5),
	vUnknown(255)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Controller - System Bus Interface Type."
	::= { eControllerInformation 18 }


a2ControllerClass OBJECT-TYPE
	SYNTAX INTEGER {
	vRaid(1),
	vScsi-scsi(96),
	vHba(128),
	vUnknown(255)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Controller Class Type."
	::= { eControllerInformation 19 }


a2ControllerModel OBJECT-TYPE
	SYNTAX INTEGER {
	vDac960e(1),
	vDac960m(8),
	vDac960pd(16),
	vDac960pl(17),
	vDac960pdu(18),
	vDac960pe(19),
	vDac960pg(20),
	vDac960pj(21),
	vDac960ptl0(22),
	vDac960pr(23),
	vDac960prl(24),
	vDac960pt(25),
	vDac1164p(26),
	vDac960ptl1(27),
	vDac960s(96),
	vDac960su(97),
	vDac960sx(98),
	vDac960sf(99),
	vDac960ss(100),
	vDac960fl(101),
	vDac960ll(102),
	vDac960ff(103),
	vFCArray(104),
	vBt-440(129),
	vBt-440c(130),
	vBt-445(131),
	vBt-445c(132),
	vBt-44xc(133),
	vBt-445s(134),
	vBt-640(136),
	vBt-640a(137),
	vBt-646(138),
	vBt-646d(139),
	vBt-646s(140),
	vBt-742(144),
	vBt-742a(145),
	vBt-747(146),
	vBt-747d(147),
	vBt-747s(148),
	vBt-74xc(149),
	vBt-757(150),
	vBt-757d(151),
	vBt-757s(152),
	vBt-757cd(153),
	vBt-75xc(154),
	vBt-747c(155),
	vBt-757c(156),
	vBt-540(160),
	vBt-540c(161),
	vBt-542(162),
	vBt-542b(163),
	vBt-542c(164),
	vBt-542d(165),
	vBt-545(166),
	vBt-545c(167),
	vBt-545s(168),
	vBt-54xc(169),
	vBt-946(176),
	vBt-946c(177),
	vBt-948(178),
	vBt-948c(179),
	vBt-956(180),
	vBt-956c(181),
	vBt-958(182),
	vBt-958c(183),
	vBt-958d(184),
	vBt-956cd(185),
	vBt-958cd(186),
	vBt930(192),
	vBt932(193),
	vBt950(194),
	vBt952(195),
	vUnknown(255)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Controller Model Type."
	::= { eControllerInformation 20 }


a2SystemBusNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "System Bus Number, for the bus the controller is interfacing
with. This value is supplied by the Operating system and may not be defined
for all operating systems."
	::= { eControllerInformation 21 }


a2SlotNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Slot Number where the controller is physically present. Defined
for EISA and MCA controller only. "
	::= { eControllerInformation 22 }


a2InterruptVectorNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Interrupt Vector Number being used by the controller. This
value is a mapped IRQ supplied by Operating System and may not be same as
the actual Interrupt Vector."
	::= { eControllerInformation 23 }


a2InterruptMode OBJECT-TYPE
	SYNTAX INTEGER {
	vEdge(0),
	vLevel(1),
	vUnknown(255)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Interrupt Mode - Edge/Level."
	::= { eControllerInformation 24 }


a2NumberOfPhysicalDevices OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number Of Physical Devices detected on this controller."
	::= { eControllerInformation 25 }


a2NumberOfPhysicalDevicesOffLine OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Physical Devices, whose operational state is Off
Line."
	::= { eControllerInformation 26 }


a2NumberOfLogicalDevices OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Logical Devices currently configured."
	::= { eControllerInformation 27 }


a2NumberOfLogicalDevicesCritical OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Logical Devices, whose operational state is Critical."
	::= { eControllerInformation 28 }


a2NumberOfLogicalDevicesOffLine OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Logical Devices, whose operational state is Off
Line."
	::= { eControllerInformation 29 }


a2FaultManagementType OBJECT-TYPE
	SYNTAX INTEGER {
	vAemi(1),
	vOem1(2),
	vOem2(4),
	vOem3(8),
	vConner(16),
	vSafte(32),
	vNotPresent(0)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Controller Fault Management Type."
	::= { eControllerInformation 30 }


a2ArrayInformation OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Information about Array(s) definition. The information is
provided in Channel-Target combination form."
	::= { eControllerInformation 31 }


a2LogicalDriveReadRequestsCount OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Read Requests to Logical Drives."
	::= { eControllerInformation 32 }


a2DataReadFromLogicalDrivesInMb OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Amount of Data Read from all Logical Drives - in MB."
	::= { eControllerInformation 33 }


a2LogicalDriveWriteRequestsCount OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Write Requests to Logical Drives."
	::= { eControllerInformation 34 }


a2DataWrittenToLogicalDrivesInMb OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Amount of data written to all Logical Drives - in MB."
	::= { eControllerInformation 35 }


a2LogicalDrivesReadCacheHitPercentage OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Logical Drives Read Data Cache Hit Rate."
	::= { eControllerInformation 36 }


a2PhysicalDriveReadRequestsCount OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Read Requests to all physical drives."
	::= { eControllerInformation 37 }


a2DataReadFromPhysicalDrivesInMb OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Amount of Data Read from all physical drives - in MB."
	::= { eControllerInformation 38 }


a2PhysicalDriveWriteRequestsCount OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Write Requests to all physical drives on this controll
r."
	::= { eControllerInformation 39 }


a2DataWrittenToPhysicalDrivesInMb OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Amount of data written all physical drives on this controller-
in MB."
	::= { eControllerInformation 40 }


a2StorageworksCabinetStatusOnChannel0 OBJECT-TYPE
	SYNTAX INTEGER {
	vOk(1),
	vNotOk(2),
	vNotPresent(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "StorageWorks Cabinet Status on Channel 0"
	::= { eControllerInformation 41 }


a2StorageworksCabinetStatusOnChannel1 OBJECT-TYPE
	SYNTAX INTEGER {
	vOk(1),
	vNotOk(2),
	vNotPresent(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "StorageWorks Cabinet Status on Channel 1"
	::= { eControllerInformation 42 }


a2StorageworksCabinetStatusOnChannel2 OBJECT-TYPE
	SYNTAX INTEGER {
	vOk(1),
	vNotOk(2),
	vNotPresent(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "StorageWorks Cabinet Status on Channel 2"
	::= { eControllerInformation 43 }


a2BatteryBackupUnitStatus OBJECT-TYPE
	SYNTAX INTEGER {
	vNotPresent(0),
	vPresent(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Battery Backup Unit Status."
	::= { eControllerInformation 44 }


a2PartnerControllerNumber OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Dual Active Partner Controller Number"
	::= { eControllerInformation 45 }


a2WWName OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Controller World-Wide Name"
	::= { eControllerInformation 46 }

a2WWName ::=
	SEQUENCE {
		a3ControllerNumber DmiInteger,
		a3LogicalDriveNumber DmiInteger,
		a3OperationalState DmiInteger,
		a3RaidLevel DmiInteger,
		a3WritePolicy DmiInteger,
		a3SizeInMb DmiInteger,
		a3PhysicalSizeInMb DmiInteger,
		a3StripeSizeInBytes DmiInteger,
		a3PhysicalDriveMap DmiDisplaystring,
		a3ArrayList DmiDisplaystring,
		a3RaidLevelString DmiDisplaystring
		}

tLogicalDriveInformation OBJECT-TYPE
	SYNTAX SEQUENCE OF SLogicalDriveInformation
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Provides information about Logical Drive Configuration."
	::= { dmtfGroups 3 }


eLogicalDriveInformation OBJECT-TYPE
	SYNTAX SLogicalDriveInformation
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION ""
	INDEX { a3ControllerNumber , a3LogicalDriveNumber }

	::= { tLogicalDriveInformation 1 }


a3ControllerNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Controller Number - used as a key."
	::= { eLogicalDriveInformation 1 }


a3LogicalDriveNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Logical Drive Number - used as a Key."
	::= { eLogicalDriveInformation 2 }


a3OperationalState OBJECT-TYPE
	SYNTAX INTEGER {
	vOnline(3),
	vCritical(4),
	vOffline(255),
	vNotPresent(128)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Logical Drive Operational State."
	::= { eLogicalDriveInformation 3 }


a3RaidLevel OBJECT-TYPE
	SYNTAX INTEGER {
	vRaid0(0),
	vRaid1(1),
	vRaid3(3),
	vRaid5(5),
	vRaid0p1(6),
	vJBOD(7)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "RAID Level associated with Logical Drive."
	::= { eLogicalDriveInformation 4 }


a3WritePolicy OBJECT-TYPE
	SYNTAX INTEGER {
	vWriteThru(0),
	vWriteBack(128)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Write Cache Policy associated with Logical Drive."
	::= { eLogicalDriveInformation 5 }


a3SizeInMb OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Logical Drive Size - in MB."
	::= { eLogicalDriveInformation 6 }


a3PhysicalSizeInMb OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Total physical capacity used by this Logical Drive - in MB."
	::= { eLogicalDriveInformation 7 }


a3StripeSizeInBytes OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Stripe size associated with Logical Drive. Valid for RAID
Levels 0, 5 and 6 only. Value is specifed in bytes."
	::= { eLogicalDriveInformation 8 }


a3PhysicalDriveMap OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "List of all physical drives that make up this Logical Drive.
The information is provided in Channel-Target combination form."
	::= { eLogicalDriveInformation 9 }


a3ArrayList OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "List of Arrays, this logical drive spans across. "
	::= { eLogicalDriveInformation 10 }


a3RaidLevelString OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "RAID Level associated with Logical Drive."
	::= { eLogicalDriveInformation 11 }

a3RaidLevelString ::=
	SEQUENCE {
		a4ControllerNumber DmiInteger,
		a4ScsiBusId DmiInteger,
		a4ScsiTargetId DmiInteger,
		a4ScsiLunId DmiInteger,
		a4OperationalState DmiInteger,
		a4VendorId DmiDisplaystring,
		a4ProductId DmiDisplaystring,
		a4ProductRevisionLevel DmiDisplaystring,
		a4SizeInMb DmiInteger,
		a4DeviceType DmiInteger,
		a4SoftErrorsCount DmiCounter,
		a4HardErrorsCount DmiCounter,
		a4ParityErrorsCount DmiCounter,
		a4MiscErrorsCount DmiCounter,
		a4ArrayList DmiDisplaystring,
		a4LogicalDriveList DmiDisplaystring
		}

tPhysicalDeviceInformation OBJECT-TYPE
	SYNTAX SEQUENCE OF SPhysicalDeviceInformation
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "SCSI Physical Device Information."
	::= { dmtfGroups 4 }


ePhysicalDeviceInformation OBJECT-TYPE
	SYNTAX SPhysicalDeviceInformation
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION ""
	INDEX { a4ControllerNumber , a4ScsiBusId, a4ScsiTargetId }

	::= { tPhysicalDeviceInformation 1 }


a4ControllerNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Controller Number - used as a key"
	::= { ePhysicalDeviceInformation 1 }


a4ScsiBusId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "SCSI Channel Number - used as a key"
	::= { ePhysicalDeviceInformation 2 }


a4ScsiTargetId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "SCSI Physical Device Target Id - used as a key"
	::= { ePhysicalDeviceInformation 3 }


a4ScsiLunId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "SCSI LUN of Physical Device."
	::= { ePhysicalDeviceInformation 4 }


a4OperationalState OBJECT-TYPE
	SYNTAX INTEGER {
	vDead(0),
	vRebuilding(2),
	vRebuildCancelled(130),
	vOnline(3),
	vHotspare(16),
	vPresent(5),
	vNotPresent(6)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "SCSI Physical Device State."
	::= { ePhysicalDeviceInformation 5 }


a4VendorId OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Physical Device Vendor Id - from SCSI Inquiry Info."
	::= { ePhysicalDeviceInformation 6 }


a4ProductId OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Physical Device Product Id - from SCSI Inquiry Info."
	::= { ePhysicalDeviceInformation 7 }


a4ProductRevisionLevel OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Physical Device Product Revision Level - from SCSI Inquiry
Info."
	::= { ePhysicalDeviceInformation 8 }


a4SizeInMb OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Size in MB - from SCSI Read Capacity Data."
	::= { ePhysicalDeviceInformation 9 }


a4DeviceType OBJECT-TYPE
	SYNTAX INTEGER {
	vFixedDrive(0),
	vTape(1),
	vPrinter(2),
	vProcessor(3),
	vWorm(4),
	vCdrom(5),
	vScanner(6),
	vMo(7),
	vChanger(8),
	vCommunications(9),
	vGraphics-0(10),
	vGraphics-1(11),
	vReserved-0(12),
	vReserved-1(13),
	vReserved-2(14),
	vReserved-3(15),
	vReserved-4(16),
	vReserved-5(17),
	vReserved-6(18),
	vReserved-7(19),
	vReserved-8(20),
	vReserved-9(21),
	vReserved-10(22),
	vReserved-11(23),
	vReserved-12(24),
	vReserved-13(25),
	vReserved-14(26),
	vReserved-15(27),
	vReserved-16(28),
	vReserved-17(29),
	vReserved-18(30),
	vUnknown(31),
	vScsiHostBusAdapter(199)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "SCSI Device Type - from SCSI Inquiry Information."
	::= { ePhysicalDeviceInformation 10 }


a4SoftErrorsCount OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Soft Errors."
	::= { ePhysicalDeviceInformation 11 }


a4HardErrorsCount OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Hard Errors."
	::= { ePhysicalDeviceInformation 12 }


a4ParityErrorsCount OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Parity Errors."
	::= { ePhysicalDeviceInformation 13 }


a4MiscErrorsCount OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Misc Errors."
	::= { ePhysicalDeviceInformation 14 }


a4ArrayList OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "List Of Arrays, this physical drive is part of."
	::= { ePhysicalDeviceInformation 15 }


a4LogicalDriveList OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "List of Logical Drives that depend on this physical drive."
	::= { ePhysicalDeviceInformation 16 }

a4LogicalDriveList ::=
	SEQUENCE {
		a5ManagementSoftwareRevision DmiDisplaystring,
		a5ManagementSoftwareBuildDate DmiDisplaystring,
		a5MylexDacDeviceDriverRevision DmiDisplaystring,
		a5MylexDacDeviceDriverBuildDate DmiDisplaystring,
		a5GamDriverRevision DmiDisplaystring,
		a5GamDriverBuildDate DmiDisplaystring
		}

tMylexDacManagementSoftware OBJECT-TYPE
	SYNTAX SEQUENCE OF SMylexDacManagementSoftware
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "MDAC DAC Management Software Version Information."
	::= { dmtfGroups 5 }


eMylexDacManagementSoftware OBJECT-TYPE
	SYNTAX SMylexDacManagementSoftware
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION ""
	::= { tMylexDacManagementSoftware 1 }


a5ManagementSoftwareRevision OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Mylex DAC Management Software Revision Information."
	::= { eMylexDacManagementSoftware 1 }


a5ManagementSoftwareBuildDate OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Mylex DAC Management Software Build Date Information - month/dat
/year format."
	::= { eMylexDacManagementSoftware 2 }


a5MylexDacDeviceDriverRevision OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Mylex DAC Device driver Revision Information."
	::= { eMylexDacManagementSoftware 3 }


a5MylexDacDeviceDriverBuildDate OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Mylex DAC Device Driver Build Date Information - month/date/year
format."
	::= { eMylexDacManagementSoftware 4 }


a5GamDriverRevision OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Mylex DAC GAM Driver Revision Information."
	::= { eMylexDacManagementSoftware 5 }


a5GamDriverBuildDate OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Mylex DAC GAM Driver Build Date Information - date/month/year
format."
	::= { eMylexDacManagementSoftware 6 }

a5GamDriverBuildDate ::=
	SEQUENCE {
		a6ControllerNumber DmiInteger,
		a6LogicalDriveNumber DmiInteger,
		a6ReadRequestsCount DmiCounter,
		a6DataReadInMb DmiCounter,
		a6WriteRequestsCount DmiCounter,
		a6DataWrittenInMb DmiCounter,
		a6ReadCacheHitPercentage DmiCounter
		}

tLogicalDriveStatistics OBJECT-TYPE
	SYNTAX SEQUENCE OF SLogicalDriveStatistics
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Logical Drive Performance Statistics"
	::= { dmtfGroups 6 }


eLogicalDriveStatistics OBJECT-TYPE
	SYNTAX SLogicalDriveStatistics
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION ""
	INDEX { a6ControllerNumber , a6LogicalDriveNumber }

	::= { tLogicalDriveStatistics 1 }


a6ControllerNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Controller Number - used as a key."
	::= { eLogicalDriveStatistics 1 }


a6LogicalDriveNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Logical Drive Number - used as a key."
	::= { eLogicalDriveStatistics 2 }


a6ReadRequestsCount OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Read Requests."
	::= { eLogicalDriveStatistics 3 }


a6DataReadInMb OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Amount of Data Read from this logical drive- in MB."
	::= { eLogicalDriveStatistics 4 }


a6WriteRequestsCount OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Write Requests."
	::= { eLogicalDriveStatistics 5 }


a6DataWrittenInMb OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Amount of data written - in MB."
	::= { eLogicalDriveStatistics 6 }


a6ReadCacheHitPercentage OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Read Cache Hit Rate."
	::= { eLogicalDriveStatistics 7 }

a6ReadCacheHitPercentage ::=
	SEQUENCE {
		a7ControllerNumber DmiInteger,
		a7ScsiBusId DmiInteger,
		a7ScsiTargetId DmiInteger,
		a7ScsiLun DmiInteger,
		a7ReadRequestsCount DmiCounter,
		a7DataReadInMb DmiCounter,
		a7WriteRequestsCount DmiCounter,
		a7DataWrittenInMb DmiCounter
		}

tPhysicalDriveStatistics OBJECT-TYPE
	SYNTAX SEQUENCE OF SPhysicalDriveStatistics
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Physical Drive Performance Statistics"
	::= { dmtfGroups 7 }


ePhysicalDriveStatistics OBJECT-TYPE
	SYNTAX SPhysicalDriveStatistics
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION ""
	INDEX { a7ControllerNumber , a7ScsiBusId, a7ScsiTargetId }

	::= { tPhysicalDriveStatistics 1 }


a7ControllerNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Controller Number - used as a key."
	::= { ePhysicalDriveStatistics 1 }


a7ScsiBusId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "SCSI Channel Number - used as a key."
	::= { ePhysicalDriveStatistics 2 }


a7ScsiTargetId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "SCSI Target Device Id - used as a key."
	::= { ePhysicalDriveStatistics 3 }


a7ScsiLun OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "SCSI Lun of Physical Device."
	::= { ePhysicalDriveStatistics 4 }


a7ReadRequestsCount OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Read Requests."
	::= { ePhysicalDriveStatistics 5 }


a7DataReadInMb OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Amount of Data Read - in MB."
	::= { ePhysicalDriveStatistics 6 }


a7WriteRequestsCount OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Write Requests."
	::= { ePhysicalDriveStatistics 7 }


a7DataWrittenInMb OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Amount of data written - in MB."
	::= { ePhysicalDriveStatistics 8 }

a7DataWrittenInMb ::=
	SEQUENCE {
		a8ControllerNumber DmiInteger,
		a8ScsiBusId DmiInteger,
		a8CabinetNumber DmiInteger,
		a8ScsiTargetId DmiInteger,
		a8ScsiLun DmiInteger,
		a8CabinetType DmiInteger,
		a8NumberOfFans DmiInteger,
		a8NumberOfPowerSupplyUnits DmiInteger,
		a8NumberOfHeatSensors DmiInteger,
		a8NumberOfDriveSlots DmiInteger,
		a8NumberOfDoorLocks DmiInteger,
		a8NumberOfSpeakers DmiInteger,
		a8NumberOfFansCritical DmiInteger,
		a8NumberOfPowerSupplyUnitsCritical DmiInteger,
		a8NumberOfHeatSensorsCritical DmiInteger,
		a8NumberOfFansFailed DmiInteger,
		a8NumberOfPowerSupplyUnitsFailed DmiInteger,
		a8NumberOfHeatSensorsFailed DmiInteger
		}

tFaultManagementCabinetInformation OBJECT-TYPE
	SYNTAX SEQUENCE OF SFaultManagementCabinetInformation
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Fault Management Cabinet Information."
	::= { dmtfGroups 8 }


eFaultManagementCabinetInformation OBJECT-TYPE
	SYNTAX SFaultManagementCabinetInformation
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION ""
	INDEX { a8ControllerNumber , a8ScsiBusId, a8CabinetNumber }

	::= { tFaultManagementCabinetInformation 1 }


a8ControllerNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Controller Number - used as a key."
	::= { eFaultManagementCabinetInformation 1 }


a8ScsiBusId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "SCSI Channel Number - used as a key."
	::= { eFaultManagementCabinetInformation 2 }


a8CabinetNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Cabinet Number - used as a key."
	::= { eFaultManagementCabinetInformation 3 }


a8ScsiTargetId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "SCSI Target Device Id."
	::= { eFaultManagementCabinetInformation 4 }


a8ScsiLun OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "SCSI Lun of Physical Device."
	::= { eFaultManagementCabinetInformation 5 }


a8CabinetType OBJECT-TYPE
	SYNTAX INTEGER {
	vConnerCr-6(1),
	vConnerSmartCabinet(2),
	vSafte(3),
	vUnknown(255)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Fault Management Cabinet Type - Conner CR6/Conner Smart/SAFTE."
	::= { eFaultManagementCabinetInformation 6 }


a8NumberOfFans OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Fans housed inside the cabinet."
	::= { eFaultManagementCabinetInformation 7 }


a8NumberOfPowerSupplyUnits OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Power Supply Units."
	::= { eFaultManagementCabinetInformation 8 }


a8NumberOfHeatSensors OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Heat Sensors."
	::= { eFaultManagementCabinetInformation 9 }


a8NumberOfDriveSlots OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Drive Slots."
	::= { eFaultManagementCabinetInformation 10 }


a8NumberOfDoorLocks OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Door Locks."
	::= { eFaultManagementCabinetInformation 11 }


a8NumberOfSpeakers OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Speakers."
	::= { eFaultManagementCabinetInformation 12 }


a8NumberOfFansCritical OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Fans in Critical State."
	::= { eFaultManagementCabinetInformation 13 }


a8NumberOfPowerSupplyUnitsCritical OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Power Supply units in critical state."
	::= { eFaultManagementCabinetInformation 14 }


a8NumberOfHeatSensorsCritical OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Heat Sensors in critical state."
	::= { eFaultManagementCabinetInformation 15 }


a8NumberOfFansFailed OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Fans in Failed State."
	::= { eFaultManagementCabinetInformation 16 }


a8NumberOfPowerSupplyUnitsFailed OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Power Supply units in Failed state."
	::= { eFaultManagementCabinetInformation 17 }


a8NumberOfHeatSensorsFailed OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of Heat Sensors in Failed state."
	::= { eFaultManagementCabinetInformation 18 }

a8NumberOfHeatSensorsFailed ::=
	SEQUENCE {
		a9EventTableIndex DmiInteger,
		a9EventCode DmiInteger,
		a9EventTimeStamp DmiInteger,
		a9ControllerNumber DmiInteger,
		a9ChannelNumber DmiInteger,
		a9TargetNumber DmiInteger,
		a9LunNumber DmiInteger,
		a9LogicalDriveNumber DmiInteger,
		a9FmtCabinetNumber DmiInteger,
		a9FanUnitNumber DmiInteger,
		a9PowerSupplyUnitNumber DmiInteger,
		a9HeatSensorUnitNumber DmiInteger
		}

tMylexRaidEventInformation OBJECT-TYPE
	SYNTAX SEQUENCE OF SMylexRaidEventInformation
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Event Information for Mylex RAID events."
	::= { dmtfGroups 9 }


eMylexRaidEventInformation OBJECT-TYPE
	SYNTAX SMylexRaidEventInformation
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION ""
	INDEX { a9EventTableIndex  }

	::= { tMylexRaidEventInformation 1 }


a9EventTableIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Index to the event table. A maximum of 256 events can be
stored in the event table."
	::= { eMylexRaidEventInformation 1 }


a9EventCode OBJECT-TYPE
	SYNTAX INTEGER {
	vOperationalStateOfPhysicalDeviceHasChan(1),
	vOperationalStateOfPhysicalDeviceHasCha1(2),
	vThePhysicalDeviceHasSomeErrors(3),
	vThePhysicalDeviceIsGoingToFail(4),
	vAnAutoRebuildOperationStartedOnThisPhys(5),
	vAManualRebuildOperationStartedOnThisPhy(6),
	vAManualOrAutoRebuildOperationHasComplet(7),
	vAManualOrAutoRebuildOperationHasBeenCan(8),
	vAManualOrAutoRebuildOperationHasResulte(9),
	vAManualOrAutoRebuildOperationHasResult1(10),
	vAManualOrAutoRebuildOperationHasResult2(11),
	vTheOperationalStateOfPhysicalDeviceHasC(12),
	vForTheFirstTimeGamMonitorFindsThisPhysi(13),
	vAPreviouslyFoundPhysicalDeviceDidNotRes(14),
	vAPhysicalDeviceThatIsNotPartOfCurrentDa(15),
	vExpandCapacityOperationStartedOnThisPhy(16),
	vExpandCapacityOperationDoneOnThisPhysic(17),
	vExpandCapacityOperationResultedInErrorO(18),
	vCommandTimed-outOnThisPhysicalDrive(19),
	vACommandSentToThisPhysicalDeviceHasBeen(20),
	vACommandIsBeingRetriedOnThisPhysicalDri(21),
	vParityErrorReportedOnThisPhysicalDrive(22),
	vSoftErrorReportedOnThisPhysicalDrive(23),
	vMiscellaneousErrorReportedOnThisPhysica(24),
	vPhysicalDeviceIsReset(25),
	vPhysicalDeviceIsConfiguredAsActiveSpare(26),
	vPhysicalDeviceIsConfiguredAsWarmSpare(27),
	vRequestSenseDataAvailableForThisPhysica(28),
	vConsistencyCheckOperationStartedSuccess(128),
	vTheConsistencyCheckOperationThatWasInPr(129),
	vAnOn-goingConsistencyCheckOperationOnTh(130),
	vAnOn-goingConsistencyCheckOperationResu(131),
	vAnOn-goingConsistencyCheckOperationRes1(132),
	vAnOn-goingConsistencyCheckOperationRes2(133),
	vOperationalStateOfLogicalDriveChangedFr(134),
	vOperationalStateOfLogicalDriveChangedF1(135),
	vOperationalStateOfLogicalDriveChangedF2(136),
	vAnAutomaticRebuildOperationHasStarted(137),
	vAManualRebuildOperationHasStarted(138),
	vAnOn-goingAutoOrManualRebuildOperationH(139),
	vAnOn-goingAutoOrManualRebuildOperation1(140),
	vAnOn-goingAutoOrManualRebuildOperation2(141),
	vAnOn-goingAutoOrManualRebuildOperationR(142),
	vAnOn-goingAutoOrManualRebuildOperation3(143),
	vInitializationOperationStartedSuccessfu(144),
	vInitializationOperationCompletedSuccess(145),
	vInitializationOperationCanceled(146),
	vInitializationOperationFailedBecauseThe(147),
	vForTheFirstTimeGamEventMonitorFindsThis(148),
	vAPreviouslyConfiguredLogicalDriveIsNoLo(149),
	vExpandCapacityOperationStartedForThisLo(150),
	vExpandCapacityOperationDoneForThisLogic(151),
	vExpandCapacityOperationOnThisLogicalDri(152),
	vBadBlocksFoundOnThisLogicalDrive(153),
	vLogicalDriveSizeHasChanged(154),
	vLogicalDriveRaidLevelHasChanged(155),
	vBadDataBlocksFoundOnThisLogicalDrive(156),
	vFanUnitFailed(256),
	vFanUnitIsOk(257),
	vAemiFaultManagementIndicatesThatThereIs(258),
	vSafteCabinetIndicateThatTheFanUnitIsNot(259),
	vConnerCr-6Raidsaftescr1xCabinetIndicate(272),
	vConnerCr-6Raidsaftescr1xCabinetIndiates(273),
	vAemiFaultManagementIndicatesThatAPowerS(274),
	vSafteCabinetIndicatesThatThePowerSupply(275),
	vSaftescr1xCabinetTemperatureRisedAbove7(288),
	vSaftescr1xCabinetTemperatureRisedAbove5(289),
	vSaftescr1xCabinetTemperatureIsOkbelow50(290),
	vAemiFaultManagementIndicatesOver-temper(291),
	vSaftescr1xCabinetIndicatesThatTheHeatSe(292),
	vStorageWorksCabinetFailed(304),
	vStorageWorksCabinetInCriticalState(305),
	vStorageWorksCabinetFunctioningOk(306),
	vGamServerSoftwareInitializationSuccessf(384),
	vTheDacControllerCouldNotFlushCachedData(385),
	vTheDeviceStateChangeTableIsFull(386),
	vControllerIsDead(388),
	vControllerHasBeenReset(389),
	vANewControllerFoundByGamServerSoftware(390),
	vControllerIsGone(391),
	vBatteryBackupUnitFoundOnThisController(392),
	vBatteryBackupUnitPowerIsLow(393),
	vBatteryBackupUnitPowerOk(394),
	vControllerPoweredOff(395),
	vControllerPoweredOn(396),
	vControllerOnline(397),
	vControllerOffline(398),
	vControllerCritical(399),
	vControllerBatteryBackupReconditionStart(400),
	vControllerBatteryBackupReconditionEnd(401),
	vGamServerStarted(512),
	vSystemSizeTableFull(513),
	vAUserLoggedOntoGamServer(514),
	vAUserLoggedOutOfGamServer(515),
	vUnknown(255)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Mylex RAID event code."
	::= { eMylexRaidEventInformation 2 }


a9EventTimeStamp OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Time Stamp associated with this event. It's the number of
seconds since midnight(00:00:00) January 1, 1970 GMT."
	::= { eMylexRaidEventInformation 3 }


a9ControllerNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Identifies the Disk Array Controller."
	::= { eMylexRaidEventInformation 4 }


a9ChannelNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Identifies the SCSI Bus."
	::= { eMylexRaidEventInformation 5 }


a9TargetNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Identifies the SCSI Target ID of physical device."
	::= { eMylexRaidEventInformation 6 }


a9LunNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Identifies the SCSI LUN of physical device."
	::= { eMylexRaidEventInformation 7 }


a9LogicalDriveNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Identifies the Logical Drive."
	::= { eMylexRaidEventInformation 8 }


a9FmtCabinetNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Identifies the Fault Management Cabinet Number."
	::= { eMylexRaidEventInformation 9 }


a9FanUnitNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Identifies the FAN Unit."
	::= { eMylexRaidEventInformation 10 }


a9PowerSupplyUnitNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Identifies the Power Supply Unit Number."
	::= { eMylexRaidEventInformation 11 }


a9HeatSensorUnitNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Identifies the Heat Sensor Unit Number."
	::= { eMylexRaidEventInformation 12 }

a9HeatSensorUnitNumber ::=
	SEQUENCE {
		a10ControllerNumber DmiInteger,
		a10OperationalState DmiInteger,
		a10BatteryType DmiInteger,
		a10CurrentPowerInHours DmiInteger,
		a10MaximumPowerInHours DmiInteger,
		a10ThresholdValueInHours DmiInteger,
		a10ChargeLevelInPercentage DmiInteger,
		a10Version DmiInteger,
		a10OperationalStateString DmiDisplaystring
		}

tBatteryBackupUnitInformation OBJECT-TYPE
	SYNTAX SEQUENCE OF SBatteryBackupUnitInformation
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This group provides Battery Backup Unit Information."
	::= { dmtfGroups 10 }


eBatteryBackupUnitInformation OBJECT-TYPE
	SYNTAX SBatteryBackupUnitInformation
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION ""
	INDEX { a10ControllerNumber  }

	::= { tBatteryBackupUnitInformation 1 }


a10ControllerNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Controller Number assigned to this controller by the device
driver."
	::= { eBatteryBackupUnitInformation 1 }


a10OperationalState OBJECT-TYPE
	SYNTAX INTEGER {
	vNoBatterBackupPresent(-1),
	vNoReconditionSincePowerOn(1),
	vReconditionNeeded(2),
	vFirstWarningOnLowBatteryCharge(4),
	vLastWarningOnLowBatteryCharge(8)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Operational state of Battery Backup Unit."
	::= { eBatteryBackupUnitInformation 2 }


a10BatteryType OBJECT-TYPE
	SYNTAX INTEGER {
	vNickelCadmium(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Battery Type."
	::= { eBatteryBackupUnitInformation 3 }


a10CurrentPowerInHours OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Current Power in Hours."
	::= { eBatteryBackupUnitInformation 4 }


a10MaximumPowerInHours OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Maximum Power in Hours."
	::= { eBatteryBackupUnitInformation 5 }


a10ThresholdValueInHours OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Threshold Value in Hours."
	::= { eBatteryBackupUnitInformation 6 }


a10ChargeLevelInPercentage OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Battery Charge Level (in percentage)."
	::= { eBatteryBackupUnitInformation 7 }


a10Version OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "BBU Hardware Version Number."
	::= { eBatteryBackupUnitInformation 8 }


a10OperationalStateString OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Operational state of Battery Backup Unit."
	::= { eBatteryBackupUnitInformation 9 }



fCArrayAssistant1 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY  "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] device became online."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "device became online."
	::= 1


fCArrayAssistant2 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] A hard disk has been added as hot spare."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "A hard disk has been added as hot spare."
	::= 2


fCArrayAssistant3 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] Hard drive error found."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY MAJOR

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Hard drive error found."
	::= 3


fCArrayAssistant4 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] Hard drive PFA condition found,this drive may fail soon"

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY MAJOR

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Hard drive PFA condition found,this drive may fail soon"
	::= 4


fCArrayAssistant5 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] An automatic rebuild has started."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "An automatic rebuild has started."
	::= 5


fCArrayAssistant6 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] A manual rebuild has started."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "A manual rebuild has started."
	::= 6


fCArrayAssistant7 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] Rebuild is over."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Rebuild is over."
	::= 7


fCArrayAssistant8 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] Rebuild is cancelled."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY MINOR

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Rebuild is cancelled."
	::= 8


fCArrayAssistant9 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY  "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] Rebuild stopped with error."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY MAJOR

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Rebuild stopped with error."
	::= 9


fCArrayAssistant10 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY  "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] Rebuild stopped with error.New device failed."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY MAJOR

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Rebuild stopped with error.New device failed."
	::= 10


fCArrayAssistant11 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY  "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] Rebuild stopped with error.logical drive failed."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY MAJOR

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Rebuild stopped with error.logical drive failed."
	::= 11


fCArrayAssistant12 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] A Hard disk has failed."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY CRITICAL

	--#TIMEINDEX 5

	--#STATE NONOPERATIONAL
DESCRIPTION "A Hard disk has failed."
	::= 12


fCArrayAssistant13 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] A new physical device has been found."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "A new physical device has been found."
	::= 13


fCArrayAssistant14 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] A physical device has been removed."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE NONOPERATIONAL
DESCRIPTION "physical device has been removed."
	::= 14


fCArrayAssistant15 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] A previously configured device is now available for configuration"

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "A previously configured device is now available for configuration."
	::= 15


fCArrayAssistant16 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] Expand capacity started."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Expand capacity started."
	::= 16


fCArrayAssistant17 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] Expand capacity completed."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Expand capacity completed."
	::= 17


fCArrayAssistant18 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] Expand capacity stopped with error."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY MAJOR

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Expand capacity stopped with error."
	::= 18


fCArrayAssistant19 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] Command timed out."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY MAJOR

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Command timed out."
	::= 19


fCArrayAssistant20 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] Command aborted."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY MINOR

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Command aborted."
	::= 20


fCArrayAssistant21 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] Command retried."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Command retried."
	::= 21


fCArrayAssistant22 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] Parity errors found."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Parity errors found."
	::= 22


fCArrayAssistant23 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] Soft errors found."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Soft errors found."
	::= 23


fCArrayAssistant24 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] Miscellaneous errors found."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Miscellaneous errors found."
	::= 24


fCArrayAssistant25 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] Physical device is reset."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Physical device is reset."
	::= 25


fCArrayAssistant26 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] A hard disk has been added as an active spare."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "A hard disk has been added as an active spare."
	::= 26


fCArrayAssistant27 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] A hard disk has been added as an warm spare."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "A hard disk has been added as an warm spare."
	::= 27


fCArrayAssistant28 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9TargetNumber, a9LunNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d lun %d Time %d :] Request Sense Data Available."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Request Sense Data Available."
	::= 28


fCArrayAssistant29 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] A consistency check is started."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 3

	--#STATE OPERATIONAL
DESCRIPTION "A consistency check is started."
	::= 128


fCArrayAssistant30 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] Consistency check is finished."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 3

	--#STATE OPERATIONAL
DESCRIPTION "Consistency check is finished."
	::= 129


fCArrayAssistant31 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] Consistency check is cancelled."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 3

	--#STATE OPERATIONAL
DESCRIPTION "Consistency check is cancelled."
	::= 130


fCArrayAssistant32 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] Consistency check on logical drive error."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY MAJOR

	--#TIMEINDEX 3

	--#STATE OPERATIONAL
DESCRIPTION "Consistency check on logical drive error."
	::= 131


fCArrayAssistant33 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] Consistency check on logical drive failed."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY MAJOR

	--#TIMEINDEX 3

	--#STATE OPERATIONAL
DESCRIPTION "Consistency check on logical drive failed."
	::= 132


fCArrayAssistant34 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] Consistency check on logical drive failed due to physical device failure."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY MAJOR

	--#TIMEINDEX 3

	--#STATE DEGRADED
DESCRIPTION "Consistency check on logical drive failed due to physical device failure."
	::= 133


fCArrayAssistant35 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] A logical drive has been made offline."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY CRITICAL

	--#TIMEINDEX 3

	--#STATE NONOPERATIONAL
DESCRIPTION "A logical drive has been made offline."
	::= 134


fCArrayAssistant36 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] A logical drive is critical."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY MAJOR

	--#TIMEINDEX 3

	--#STATE DEGRADED
DESCRIPTION "A logical drive is critical."
	::= 135


fCArrayAssistant37 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] A logical drive has been placed online."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 3

	--#STATE OPERATIONAL
DESCRIPTION "A logical drive has been placed online."
	::= 136


fCArrayAssistant38 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] An automatic rebuild has started on logical drive."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 3

	--#STATE OPERATIONAL
DESCRIPTION "An automatic rebuild has started on logical drive."
	::= 137


fCArrayAssistant39 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] A manual rebuild has started on logical drive."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 3

	--#STATE OPERATIONAL
DESCRIPTION "A manual rebuild has started on logical drive."
	::= 138


fCArrayAssistant40 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] Rebuild on logical drive is over."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 3

	--#STATE OPERATIONAL
DESCRIPTION "Rebuild on logical drive is over."
	::= 139


fCArrayAssistant41 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] Rebuild on logical drive is cancelled."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 3

	--#STATE DEGRADED
DESCRIPTION "Rebuild on logical drive is cancelled."
	::= 140


fCArrayAssistant42 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] Rebuild stopped with error."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY MAJOR

	--#TIMEINDEX 3

	--#STATE DEGRADED
DESCRIPTION "Rebuild stopped with error."
	::= 141


fCArrayAssistant43 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] Rebuild stopped with error.New device failed."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY MAJOR

	--#TIMEINDEX 3

	--#STATE DEGRADED
DESCRIPTION "Rebuild stopped with error.New device failed."
	::= 142


fCArrayAssistant44 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] Rebuild stopped because logical drive failed."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY CRITICAL

	--#TIMEINDEX 3

	--#STATE NONOPERATIONAL
DESCRIPTION "Rebuild stopped because logical drive failed."
	::= 143


fCArrayAssistant45 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] Logical drive initialization started."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 3

	--#STATE OPERATIONAL
DESCRIPTION "Logical drive initialization started."
	::= 144


fCArrayAssistant46 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] Logical drive initialization done."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 3

	--#STATE OPERATIONAL
DESCRIPTION "Logical drive initialization done."
	::= 145


fCArrayAssistant47 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] Logical drive initialization cancelled."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 3

	--#STATE OPERATIONAL
DESCRIPTION "Logical drive initialization cancelled."
	::= 146


fCArrayAssistant48 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] Logical drive initialization failed."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY MINOR

	--#TIMEINDEX 3

	--#STATE NONOPERATIONAL
DESCRIPTION "Logical drive initialization failed."
	::= 147


fCArrayAssistant49 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] A new logical drive has been created."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 3

	--#STATE OPERATIONAL
DESCRIPTION "A new logical drive has been created."
	::= 148


fCArrayAssistant50 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] A new logical drive has been deleted."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 3

	--#STATE NONOPERATIONAL
DESCRIPTION "A new logical drive has been deleted."
	::= 149


fCArrayAssistant51 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] Expand capacity started."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 3

	--#STATE OPERATIONAL
DESCRIPTION "Expand capacity started."
	::= 150


fCArrayAssistant52 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] Expand capacity completed."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 3

	--#STATE OPERATIONAL
DESCRIPTION "Expand capacity completed."
	::= 151


fCArrayAssistant53 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] Expand capacity stopped with error."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY MAJOR

	--#TIMEINDEX 3

	--#STATE NONOPERATIONAL
DESCRIPTION "Expand capacity stopped with error."
	::= 152


fCArrayAssistant54 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] Bad Blocks found."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY MINOR

	--#TIMEINDEX 3

	--#STATE OPERATIONAL
DESCRIPTION "Bad Blocks found."
	::= 153


fCArrayAssistant55 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] System drive size changed."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 3

	--#STATE OPERATIONAL
DESCRIPTION "System drive size changed."
	::= 154


fCArrayAssistant56 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] System device type changed."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 3

	--#STATE OPERATIONAL
DESCRIPTION "System device type changed."
	::= 155


fCArrayAssistant57 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9LogicalDriveNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d logdrv %d Time %d :] Bad Data Blocks found."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 3

	--#STATE OPERATIONAL
DESCRIPTION "Bad Data Blocks found."
	::= 156


fCArrayAssistant77 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9FmtCabinetNumber, a9FanUnitNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d Cabinet %d Fan %d Time %d :] Fan failure."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY CRITICAL

	--#TIMEINDEX 5

	--#STATE NONOPERATIONAL
DESCRIPTION "Fan failure."
	::= 256


fCArrayAssistant78 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9FmtCabinetNumber, a9FanUnitNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d Cabinet %d Fan %d Time %d :] Fan has been restored."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Fan has been restored."
	::= 257


fCArrayAssistant79 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9FmtCabinetNumber, a9FanUnitNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d Cabinet %d Fan %d Time %d :] Aemi Fan failure."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY CRITICAL

	--#TIMEINDEX 5

	--#STATE NONOPERATIONAL
DESCRIPTION "Aemi Fan failure."
	::= 258


fCArrayAssistant80 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9FmtCabinetNumber, a9FanUnitNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d Cabinet %d Fan %d Time %d :] Fan was present earlier;Not available now." 

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE NONOPERATIONAL
DESCRIPTION "Fan was prsent earlier;Not available now."
	::= 259


fCArrayAssistant81 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9FmtCabinetNumber, a9PowerSupplyUnitNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d Cabinet %d PowerSupplyUnit %d Time %d :] Power supply failure."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY CRITICAL

	--#TIMEINDEX 5

	--#STATE NONOPERATIONAL
DESCRIPTION "Power supply failure."
	::= 272


fCArrayAssistant82 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9FmtCabinetNumber, a9PowerSupplyUnitNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d Cabinet %d PowerSupplyUnit %d Time %d :] Power supply has been restored."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Power supply has been restored."
	::= 273


aemiPowerSupplyFailed TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9FmtCabinetNumber, a9PowerSupplyUnitNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d Cabinet %d PowerSupplyUnit %d Time %d :] Aemi Power supply failure."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY CRITICAL

	--#TIMEINDEX 5

	--#STATE NONOPERATIONAL
DESCRIPTION "AEMI Power supply failure."
	::= 274


fCArrayAssistant83 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9PowerSupplyUnitNumber, a9FanUnitNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d PowerSupplyUnit %d Fan %d Time %d :] Power supply was present earlier;Not available now."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE NONOPERATIONAL
DESCRIPTION "Power supply was present earlier;Not available now."
	::= 275


fCArrayAssistant84 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9FmtCabinetNumber, a9HeatSensorUnitNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d Cabinet %d HeatSensor %d Time %d :] Over Temperature.Temperature is above 70 degrees celsius."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY CRITICAL

	--#TIMEINDEX 5

	--#STATE DEGRADED
DESCRIPTION "Over temperature.Temperature is above 70 degrees celsius."
	::= 288


fCArrayAssistant85 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9FmtCabinetNumber, a9HeatSensorUnitNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d Cabinet %d HeatSensor %d Time %d :] Temperature is above 50 degrees celsius."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY MAJOR

	--#TIMEINDEX 5

	--#STATE DEGRADED
DESCRIPTION "Temperature is above 50 degrees celsius."
	::= 289


fCArrayAssistant86 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9FmtCabinetNumber, a9HeatSensorUnitNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d Cabinet %d HeatSensor %d Time %d :] Normal temperature has been restored."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Normal temperature has been restored."
	::= 290


aemiOverTemperature TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9FmtCabinetNumber, a9HeatSensorUnitNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d Cabinet %d HeatSensor %d Time %d :] AEMI over temperature."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY CRITICAL

	--#TIMEINDEX 5

	--#STATE DEGRADED
DESCRIPTION "Over temperature."
	::= 291


fCArrayAssistant87 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9FmtCabinetNumber, a9HeatSensorUnitNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d tgt %d HeatSensor %d Time %d :] Heat sensor was present earlier;Not available now."

	--#ARGUMENTS {0,1,2,3,4,5}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 5

	--#STATE OPERATIONAL
DESCRIPTION "Heat sensor was present earlier;Not available now."
	::= 292


fmtStorageworksFailed TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d Time %d :] StorageWorks Enclosure failed."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY CRITICAL

	--#TIMEINDEX 3

	--#STATE NONOPERATIONAL
DESCRIPTION "Storage-Works Enclosure failed."
	::= 304


fmtStorageworksCritical TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d Time %d :] StorageWorks Enclosure is Critical."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY MAJOR

	--#TIMEINDEX 3

	--#STATE DEGRADED
DESCRIPTION "Storage-Works Enclosure is Critical"
	::= 305


fmtStorageworksOK TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9ChannelNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d chn %d Time %d :] StorageWorks Enclosure is OK."

	--#ARGUMENTS {0,1,2,3}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 3

	--#STATE OPERATIONAL
DESCRIPTION "Storage-Works Enclosure is OK"
	::= 306


fCArrayAssistant58 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d Time %d :] GAM server software started successfully."

	--#ARGUMENTS {0,1,2}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 2

	--#STATE OPERATIONAL
DESCRIPTION "GAM server software started successfully."
	::= 384


fCArrayAssistant59 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9EventTimeStamp }

	--#SUMMARY  "[Event %d ctl %d Time %d :] Writeback error. Data corruption may be seen."

	--#ARGUMENTS {0,1,2}

	--#SEVERITY CRITICAL

	--#TIMEINDEX 2

	--#STATE OPERATIONAL
DESCRIPTION "Write back error occurred."
	::= 385


fCArrayAssistant60 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9EventTimeStamp }

	--#SUMMARY  "[Event %d ctl %d Time %d :] State change table full."

	--#ARGUMENTS {0,1,2}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 2

	--#STATE OPERATIONAL
DESCRIPTION "State change table full."
	::= 386


fCArrayAssistant61 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9EventTimeStamp }

	--#SUMMARY  "[Event %d ctl %d Time %d :] Controller is not functional any more."

	--#ARGUMENTS {0,1,2}

	--#SEVERITY CRITICAL

	--#TIMEINDEX 2

	--#STATE NONOPERATIONAL
DESCRIPTION "controller is no more functional."
	::= 388


fCArrayAssistant62 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d Time %d :] controller has been reset."

	--#ARGUMENTS {0,1,2}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 2

	--#STATE OPERATIONAL
DESCRIPTION "controller has been reset."
	::= 389


fCArrayAssistant63 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d Time %d :] controller is found."

	--#ARGUMENTS {0,1,2}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 2

	--#STATE OPERATIONAL
DESCRIPTION "controller is found."
	::= 390


fCArrayAssistant64 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d Time %d :] controller is gone."

	--#ARGUMENTS {0,1,2}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 2

	--#STATE NONOPERATIONAL
DESCRIPTION "controller is gone."
	::= 391


fCArrayAssistant65 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d Time %d :] Battery Backup unit is present."

	--#ARGUMENTS {0,1,2}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 2

	--#STATE OPERATIONAL
DESCRIPTION "Battery Backup unit is present."
	::= 392


fCArrayAssistant66 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d Time %d :] Battery Power Low."

	--#ARGUMENTS {0,1,2}

	--#SEVERITY MAJOR

	--#TIMEINDEX 2

	--#STATE DEGRADED
DESCRIPTION "Battery Power Low."
	::= 393


fCArrayAssistant67 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d Time %d :] Battery Power OK."

	--#ARGUMENTS {0,1,2}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 2

	--#STATE OPERATIONAL
DESCRIPTION "Battery Power OK."
	::= 394


fCArrayAssistant68 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d Time %d :] Controller Powered Off."

	--#ARGUMENTS {0,1,2}

	--#SEVERITY CRITICAL

	--#TIMEINDEX 2

	--#STATE NONOPERATIONAL
DESCRIPTION "Controller Powered Off."
	::= 395


fCArrayAssistant69 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d Time %d :] Controller Powered On."

	--#ARGUMENTS {0,1,2}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 2

	--#STATE OPERATIONAL
DESCRIPTION "Controller Powered On."
	::= 396


fCArrayAssistant70 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d Time %d :] Controller Online."

	--#ARGUMENTS {0,1,2}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 2

	--#STATE OPERATIONAL
DESCRIPTION "Controller Online."
	::= 397


fCArrayAssistant71 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d Time %d :] Controller Offline."

	--#ARGUMENTS {0,1,2}

	--#SEVERITY CRITICAL

	--#TIMEINDEX 2

	--#STATE NONOPERATIONAL
DESCRIPTION "Controller Offline."
	::= 398


fCArrayAssistant72 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d Time %d :] Controller's Partner is gone."

	--#ARGUMENTS {0,1,2}

	--#SEVERITY CRITICAL

	--#TIMEINDEX 2

	--#STATE NONOPERATIONAL
DESCRIPTION "Controller's Partner is Gone."
	::= 399


fCArrayAssistant73 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d Time %d :] Battery Backup Recondition Started."

	--#ARGUMENTS {0,1,2}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 2

	--#STATE OPERATIONAL
DESCRIPTION "Battery Backup Recondition Started."
	::= 400


fCArrayAssistant74 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d Time %d :] Battery Backup Recondition Finished."

	--#ARGUMENTS {0,1,2}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 2

	--#STATE OPERATIONAL
DESCRIPTION "Battery Backup Recondition Finished."
	::= 401


fCArrayAssistant75 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9ControllerNumber, a9EventTimeStamp }

	--#SUMMARY "[Event %d ctl %d Time %d :] Battery Backup Recondition Cancelled."

	--#ARGUMENTS {0,1,2}

	--#SEVERITY INFORMATIONAL

	--#TIMEINDEX 2

	--#STATE OPERATIONAL
DESCRIPTION "Battery Backup Recondition Cancelled."
	::= 402


gamSystemStarted TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9EventTimeStamp }

	--#SUMMARY "[Event %d Time %d :] GAM server software started successfully."

	--#ARGUMENTS {0,1}

	--#SEVERITY INFORMATIONAL

	--#CATEGORY "NetServer Events"

	--#STATE OPERATIONAL
DESCRIPTION "GAM server software started successfully."
	::= 512


fCArrayAssistant76 TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9EventTimeStamp }

	--#SUMMARY "[Event %d Time %d :] GAM driver, internal size table full."

	--#ARGUMENTS {0,1}

	--#SEVERITY INFORMATIONAL

	--#CATEGORY "NetServer Events"

	--#STATE OPERATIONAL
DESCRIPTION "GAM driver, internal size table full."
	::= 513


systemUserLoggedIn TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9EventTimeStamp }

	--#SUMMARY "[Event %d Time %d :] User logged into GAM server environment."

	--#ARGUMENTS {0,1}

	--#SEVERITY INFORMATIONAL

	--#CATEGORY "NetServer Events"

	--#STATE OPERATIONAL
DESCRIPTION "User logged into GAM server environment."
	::= 514


systemUserLoggedOut TRAP-TYPE
	ENTERPRISE eMylexRaidEventInformation
	VARIABLES { a9EventCode, a9EventTimeStamp }

	--#SUMMARY "[Event %d Time %d :] User logged out of GAM server environment."

	--#ARGUMENTS {0,1}

	--#SEVERITY INFORMATIONAL

	--#CATEGORY "NetServer Events"

	--#STATE OPERATIONAL
DESCRIPTION "User logged out of GAM server environment."
	::= 515


END