-- MIB created 9/24/97 11:30:14, by -- SMIC (the next generation) version 1.6.31, December 11, 1994. -- CHANGE LOG -- 092497 schiang -- Removed experimental from IMPORTS -- Moved atmMIB and atmMIBObjects object identifiers to ATM-TC-MIB -- Changed to import ifIndex from rfc1213. ATM-MIB DEFINITIONS ::= BEGIN -- From file: "atm1.mi2" -- Compile options "4 G A M" IMPORTS IpAddress FROM RFC1155-SMI Counter32, Integer32 FROM SNMPv2-SMI-v1 OBJECT-TYPE FROM RFC-1212 mib-2, ifIndex FROM RFC1213-MIB DisplayString, RowStatus FROM SNMPv2-TC-v1 InterfaceIndex FROM IF-MIB atmMIB, atmMIBObjects FROM ATM-TC-MIB AtmAddr, AtmConnKind, AtmConnCastType, AtmServiceCategory, AtmTrafficDescrParamIndex, AtmVpIdentifier, AtmVcIdentifier, AtmVorXAdminStatus, AtmVorXLastChange, AtmVorXOperStatus, atmNoTrafficDescriptor FROM ATM-TC-MIB; --atmMIB OBJECT IDENTIFIER ::= { experimental 41 } -- MODULE-IDENTITY -- LastUpdated -- 9701081122Z -- OrgName -- IETF AToM MIB Working Group -- ContactInfo -- Kaj Tesink -- Postal: Bellcore -- 331 Newman Springs Road -- Red Bank, NJ 07701 -- Tel: 908-758-5254 -- Fax: 908-758-4177 -- E-mail: kaj@cc.bellcore.com -- Descr -- This is the MIB Module for ATM and AAL5-related -- objects for managing ATM interfaces, ATM virtual -- links, ATM cross-connects, AAL5 entities, and -- and AAL5 connections. -- RevDate -- 9406072245Z -- RevDescr -- RFC1695 atmMIBConformance OBJECT IDENTIFIER ::= { atmMIB 2 } atmMIBGroups OBJECT IDENTIFIER ::= { atmMIBConformance 1 } atmMIBCompliances OBJECT IDENTIFIER ::= { atmMIBConformance 2 } atmInterfaceConfTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmInterfaceConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains ATM local interface configuration parameters, one entry per ATM interface port." ::= { atmMIBObjects 2 } atmInterfaceConfEntry OBJECT-TYPE SYNTAX AtmInterfaceConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This list contains ATM interface configuration parameters and state variables and is indexed by ifIndex values of ATM interfaces." INDEX { ifIndex } ::= { atmInterfaceConfTable 1 } AtmInterfaceConfEntry ::= SEQUENCE { atmInterfaceMaxVpcs INTEGER, atmInterfaceMaxVccs INTEGER, atmInterfaceConfVpcs INTEGER, atmInterfaceConfVccs INTEGER, atmInterfaceMaxActiveVpiBits INTEGER, atmInterfaceMaxActiveVciBits INTEGER, atmInterfaceIlmiVpi AtmVpIdentifier, atmInterfaceIlmiVci AtmVcIdentifier, atmInterfaceAddressType INTEGER, atmInterfaceAdminAddr AtmAddr, atmInterfaceMyNeighborIpAddress IpAddress, atmInterfaceMyNeighborIfName DisplayString, atmInterfaceCurrentMaxVpiBits INTEGER, atmInterfaceCurrentMaxVciBits INTEGER, atmInterfaceSubscrAddress AtmAddr } atmInterfaceMaxVpcs OBJECT-TYPE SYNTAX INTEGER(0..4096) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of VPCs (PVPCs and SVPCs) supported at this ATM interface. At the ATM UNI, the maximum number of VPCs (PVPCs and SVPCs) ranges from 0 to 256 only." ::= { atmInterfaceConfEntry 1 } atmInterfaceMaxVccs OBJECT-TYPE SYNTAX INTEGER(0..65536) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of VCCs (PVCCs and SVCCs) supported at this ATM interface." ::= { atmInterfaceConfEntry 2 } atmInterfaceConfVpcs OBJECT-TYPE SYNTAX INTEGER(0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "The number of VPCs (PVPC, Soft PVPC and SVPC) currently in use at this ATM interface. It includes the number of PVPCs and Soft PVPCs that are configured at the interface, plus the number of SVPCs that are currently established at the interface. At the ATM UNI, the configured number of VPCs (PVPCs and SVPCs) can range from 0 to 256 only." ::= { atmInterfaceConfEntry 3 } atmInterfaceConfVccs OBJECT-TYPE SYNTAX INTEGER(0..65536) ACCESS read-only STATUS mandatory DESCRIPTION "The number of VCCs (PVCC, Soft PVCC and SVCC) currently in use at this ATM interface. It includes the number of PVCCs and Soft PVCCs that are configured at the interface, plus the number of SVCCs that are currently established at the interface." ::= { atmInterfaceConfEntry 4 } atmInterfaceMaxActiveVpiBits OBJECT-TYPE SYNTAX INTEGER(0..12) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of active VPI bits configured for use at the ATM interface. At the ATM UNI, the maximum number of active VPI bits configured for use ranges from 0 to 8 only." ::= { atmInterfaceConfEntry 5 } atmInterfaceMaxActiveVciBits OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of active VCI bits configured for use at this ATM interface." ::= { atmInterfaceConfEntry 6 } atmInterfaceIlmiVpi OBJECT-TYPE SYNTAX AtmVpIdentifier -- Rsyntax INTEGER(0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "The VPI value of the VCC supporting the ILMI at this ATM interface. If the values of atmInterfaceIlmiVpi and atmInterfaceIlmiVci are both equal to zero then the ILMI is not supported at this ATM interface." DEFVAL { 0 } ::= { atmInterfaceConfEntry 7 } atmInterfaceIlmiVci OBJECT-TYPE SYNTAX AtmVcIdentifier -- Rsyntax INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The VCI value of the VCC supporting the ILMI at this ATM interface. If the values of atmInterfaceIlmiVpi and atmInterfaceIlmiVci are both equal to zero then the ILMI is not supported at this ATM interface." DEFVAL { 16 } ::= { atmInterfaceConfEntry 8 } atmInterfaceAddressType OBJECT-TYPE SYNTAX INTEGER { private(1), nsapE164(2), nativeE164(3), other(4) } ACCESS read-only STATUS deprecated DESCRIPTION "The type of primary ATM address configured for use at this ATM interface." ::= { atmInterfaceConfEntry 9 } atmInterfaceAdminAddr OBJECT-TYPE SYNTAX AtmAddr -- Rsyntax OCTET STRING(SIZE(0 | 8 | 20)) ACCESS read-only STATUS deprecated DESCRIPTION "The primary address assigned for administrative purposes, for example, an address associated with the service provider side of a public network UNI (thus, the value of this address corresponds with the value of ifPhysAddress at the host side). If this interface has no assigned administrative address, or when the address used for administrative purposes is the same as that used for ifPhysAddress, then this is an octet string of zero length." ::= { atmInterfaceConfEntry 10 } atmInterfaceMyNeighborIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams sent to UDP port 161, in order to access network management information concerning the operation of that system. Note that the value of this object may be obtained in different ways, e.g., by manual configuration, or through ILMI interaction with the neighbor system." ::= { atmInterfaceConfEntry 11 } atmInterfaceMyNeighborIfName OBJECT-TYPE SYNTAX DisplayString -- Rsyntax OCTET STRING(SIZE(0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. If this interface does not have a textual name, the value of this object is a zero length string. Note that the value of this object may be obtained in different ways, e.g., by manual configuration, or through ILMI interaction with the neighbor system." ::= { atmInterfaceConfEntry 12 } atmInterfaceCurrentMaxVpiBits OBJECT-TYPE SYNTAX INTEGER(0..12) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of VPI Bits that may currently be used at this ATM interface. The value is the minimum of atmInterfaceMaxActiveVpiBits, and the atmInterfaceMaxActiveVpiBits of the interface's UNI/NNI peer. If the interface does not negotiate with its peer to determine the number of VPI Bits that can be used on the interface, then the value of this object must equal atmInterfaceMaxActiveVpiBits." ::= { atmInterfaceConfEntry 13 } atmInterfaceCurrentMaxVciBits OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of VCI Bits that may currently be used at this ATM interface. The value is the minimum of atmInterfaceMaxActiveVciBits, and the atmInterfaceMaxActiveVpiBits of the interface's UNI/NNI peer. If the interface does not negotiate with its peer to determine the number of VCI Bits that can be used on the interface, then the value of this object must equal atmInterfaceMaxActiveVciBits." ::= { atmInterfaceConfEntry 14 } atmInterfaceSubscrAddress OBJECT-TYPE SYNTAX AtmAddr -- Rsyntax OCTET STRING(SIZE(0 | 8 | 20)) ACCESS read-write STATUS mandatory DESCRIPTION "The identifier assigned by a service provider to the network side of a public network UNI. If this interface has no assigned service provider address, or for other interfaces this is an octet string of zero length." ::= { atmInterfaceConfEntry 15 } atmInterfaceDs3PlcpTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmInterfaceDs3PlcpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains ATM interface DS3 PLCP parameters and state variables, one entry per ATM interface port." ::= { atmMIBObjects 3 } atmInterfaceDs3PlcpEntry OBJECT-TYPE SYNTAX AtmInterfaceDs3PlcpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This list contains DS3 PLCP parameters and state variables at the ATM interface and is indexed by the ifIndex value of the ATM interface." INDEX { ifIndex } ::= { atmInterfaceDs3PlcpTable 1 } AtmInterfaceDs3PlcpEntry ::= SEQUENCE { atmInterfaceDs3PlcpSEFSs Counter32, atmInterfaceDs3PlcpAlarmState INTEGER, atmInterfaceDs3PlcpUASs Counter32 } atmInterfaceDs3PlcpSEFSs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of DS3 PLCP Severely Errored Framing Second (SEFS). Each SEFS represents a one-second interval which contains one or more SEF event." ::= { atmInterfaceDs3PlcpEntry 1 } atmInterfaceDs3PlcpAlarmState OBJECT-TYPE SYNTAX INTEGER { noAlarm(1), receivedFarEndAlarm(2), incomingLOF(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if there is an alarm present for the DS3 PLCP. The value receivedFarEndAlarm means that the DS3 PLCP has received an incoming Yellow Signal, the value incomingLOF means that the DS3 PLCP has declared a loss of frame (LOF) failure condition, and the value noAlarm means that there are no alarms present. Transition from the failure to the no alarm state occurs when no defects (e.g., LOF) are received for more than 10 seconds." ::= { atmInterfaceDs3PlcpEntry 2 } atmInterfaceDs3PlcpUASs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Unavailable Seconds encountered by the PLCP." ::= { atmInterfaceDs3PlcpEntry 3 } atmInterfaceTCTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmInterfaceTCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains ATM interface TC Sublayer parameters and state variables, one entry per ATM interface port." ::= { atmMIBObjects 4 } atmInterfaceTCEntry OBJECT-TYPE SYNTAX AtmInterfaceTCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This list contains TC Sublayer parameters and state variables at the ATM interface and is indexed by the ifIndex value of the ATM interface." INDEX { ifIndex } ::= { atmInterfaceTCTable 1 } AtmInterfaceTCEntry ::= SEQUENCE { atmInterfaceOCDEvents Counter32, atmInterfaceTCAlarmState INTEGER } atmInterfaceOCDEvents OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the Out of Cell Delineation (OCD) events occur. If seven consecutive ATM cells have Header Error Control (HEC) violations, an OCD event occurs. A high number of OCD events may indicate a problem with the TC Sublayer." ::= { atmInterfaceTCEntry 1 } atmInterfaceTCAlarmState OBJECT-TYPE SYNTAX INTEGER { noAlarm(1), lcdFailure(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if there is an alarm present for the TC Sublayer. The value lcdFailure(2) indicates that the TC Sublayer is currently in the Loss of Cell Delineation (LCD) defect maintenance state. The value noAlarm(1) indicates that the TC Sublayer is currently not in the LCD defect maintenance state." ::= { atmInterfaceTCEntry 2 } atmTrafficDescrParamTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmTrafficDescrParamEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information on ATM traffic descriptor type and the associated parameters." ::= { atmMIBObjects 5 } atmTrafficDescrParamEntry OBJECT-TYPE SYNTAX AtmTrafficDescrParamEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This list contains ATM traffic descriptor type and the associated parameters." INDEX { atmTrafficDescrParamIndex } ::= { atmTrafficDescrParamTable 1 } AtmTrafficDescrParamEntry ::= SEQUENCE { atmTrafficDescrParamIndex AtmTrafficDescrParamIndex, atmTrafficDescrType OBJECT IDENTIFIER, atmTrafficDescrParam1 Integer32, atmTrafficDescrParam2 Integer32, atmTrafficDescrParam3 Integer32, atmTrafficDescrParam4 Integer32, atmTrafficDescrParam5 Integer32, atmTrafficQoSClass INTEGER, atmTrafficDescrRowStatus RowStatus, atmServiceCategory AtmServiceCategory } atmTrafficDescrParamIndex OBJECT-TYPE SYNTAX AtmTrafficDescrParamIndex -- Rsyntax INTEGER(0..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This object is used by the virtual link table (i.e., VPL or VCL table) to identify the row of this table. When creating a new row in the table the value of this index may be obtained by retrieving the value of atmTrafficDescrParamIndexNext." ::= { atmTrafficDescrParamEntry 1 } atmTrafficDescrType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object identifies the type of ATM traffic descriptor. The type may indicate no traffic descriptor or traffic descriptor with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmTrafficDescrParam1 atmTrafficDescrParam2 atmTrafficDescrParam3 atmTrafficDescrParam4 atmTrafficDescrParam5." DEFVAL { atmNoTrafficDescriptor } ::= { atmTrafficDescrParamEntry 2 } atmTrafficDescrParam1 OBJECT-TYPE SYNTAX Integer32 ACCESS read-write STATUS mandatory DESCRIPTION "The first parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType." DEFVAL { 0 } ::= { atmTrafficDescrParamEntry 3 } atmTrafficDescrParam2 OBJECT-TYPE SYNTAX Integer32 ACCESS read-write STATUS mandatory DESCRIPTION "The second parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType." DEFVAL { 0 } ::= { atmTrafficDescrParamEntry 4 } atmTrafficDescrParam3 OBJECT-TYPE SYNTAX Integer32 ACCESS read-write STATUS mandatory DESCRIPTION "The third parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType." DEFVAL { 0 } ::= { atmTrafficDescrParamEntry 5 } atmTrafficDescrParam4 OBJECT-TYPE SYNTAX Integer32 ACCESS read-write STATUS mandatory DESCRIPTION "The fourth parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType." DEFVAL { 0 } ::= { atmTrafficDescrParamEntry 6 } atmTrafficDescrParam5 OBJECT-TYPE SYNTAX Integer32 ACCESS read-write STATUS mandatory DESCRIPTION "The fifth parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType." DEFVAL { 0 } ::= { atmTrafficDescrParamEntry 7 } atmTrafficQoSClass OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS deprecated DESCRIPTION "The value of this object identifies the QoS Class. Four Service classes have been specified in the ATM Forum UNI Specification: Service Class A: Constant bit rate video and Circuit emulation Service Class B: Variable bit rate video/audio Service Class C: Connection-oriented data Service Class D: Connectionless data Four QoS classes numbered 1, 2, 3, and 4 have been specified with the aim to support service classes A, B, C, and D respectively. An unspecified QoS Class numbered `0' is used for best effort traffic." DEFVAL { 0 } ::= { atmTrafficDescrParamEntry 8 } atmTrafficDescrRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create a new row or modify or delete an existing row in this table." DEFVAL { active } ::= { atmTrafficDescrParamEntry 9 } atmServiceCategory OBJECT-TYPE SYNTAX AtmServiceCategory -- Rsyntax INTEGER { -- other(1), -- cbr(2), -- rtVbr(3), -- nrtVbr(4), -- abr(5), -- ubr(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION " The ATM service category." DEFVAL { ubr } ::= { atmTrafficDescrParamEntry 10 } atmVplTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmVplEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Virtual Path Link (VPL) table. A bi-directional VPL is modeled as one entry in this table." ::= { atmMIBObjects 6 } atmVplEntry OBJECT-TYPE SYNTAX AtmVplEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the VPL table. This entry is used to model a bi-directional VPL. To create a VPL at an ATM interface, either of the following procedures are used: Negotiated VPL establishment (1) The management application creates a VPL entry in the atmVplTable by setting atmVplRowStatus to createAndWait(5). This may fail for the following reasons: - The selected VPI value is unavailable, - The selected VPI value is in use. Otherwise, the agent creates a row and reserves the VPI value on that port. (2) The manager selects an existing row(s) in the atmTrafficDescrParamTable, thereby, selecting a set of self-consistent ATM traffic parameters and the service category for receive and transmit directions of the VPL. (2a) If no suitable row(s) in the atmTrafficDescrParamTable exists, the manager must create a new row(s) in that table. (2b) The manager characterizes the VPL's traffic parameters through setting the atmVplReceiveTrafficDescrIndex and the atmVplTransmitTrafficDescrIndex values in the VPL table, which point to the rows containing desired ATM traffic parameter values in the atmTrafficDescrParamTable. The agent will check the availability of resources and may refuse the request. If the transmit and receive service categories are inconsistent, the agent should refuse the request. (3) The manager activates the VPL by setting the the atmVplRowStatus to active(1). If this set is successful, the agent has reserved the resources to satisfy the requested traffic parameter values and the service category for that VPL. (4) If the VPL terminates a VPC in the ATM host or switch, the manager turns on the atmVplAdminStatus to up(1) to turn the VPL traffic flow on. Otherwise, the atmVpCrossConnectTable must be used to cross-connect the VPL to another VPL(s) in an ATM switch or network. One-Shot VPL Establishment A VPL may also be established in one step by a set-request with all necessary VPL parameter values and atmVplRowStatus set to createAndGo(4). In contrast to the negotiated VPL establishment which allows for detailed error checking (i.e., set errors are explicitly linked to particular resource acquisition failures), the one-shot VPL establishment performs the setup on one operation but does not have the advantage of step-wise error checking. VPL Retirement A VPL is released by setting atmVplRowStatus to destroy(6), and the agent may release all associated resources." INDEX { ifIndex, atmVplVpi } ::= { atmVplTable 1 } AtmVplEntry ::= SEQUENCE { atmVplVpi AtmVpIdentifier, atmVplAdminStatus AtmVorXAdminStatus, atmVplOperStatus AtmVorXOperStatus, atmVplLastChange AtmVorXLastChange, atmVplReceiveTrafficDescrIndex AtmTrafficDescrParamIndex, atmVplTransmitTrafficDescrIndex AtmTrafficDescrParamIndex, atmVplCrossConnectIdentifier INTEGER, atmVplRowStatus RowStatus, atmVplCastType AtmConnCastType, atmVplConnKind AtmConnKind } atmVplVpi OBJECT-TYPE SYNTAX AtmVpIdentifier -- Rsyntax INTEGER(0..4095) ACCESS not-accessible STATUS mandatory DESCRIPTION "The VPI value of the VPL." ::= { atmVplEntry 1 } atmVplAdminStatus OBJECT-TYPE SYNTAX AtmVorXAdminStatus -- Rsyntax INTEGER { -- up(1), -- down(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is implemented only for a VPL which terminates a VPC (i.e., one which is NOT cross-connected to other VPLs). Its value specifies the desired administrative state of the VPL." DEFVAL { down } ::= { atmVplEntry 2 } atmVplOperStatus OBJECT-TYPE SYNTAX AtmVorXOperStatus -- Rsyntax INTEGER { -- up(1), -- down(2), -- unknown(3) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The current operational status of the VPL." ::= { atmVplEntry 3 } atmVplLastChange OBJECT-TYPE SYNTAX AtmVorXLastChange -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime at the time this VPL entered its current operational state." ::= { atmVplEntry 4 } atmVplReceiveTrafficDescrIndex OBJECT-TYPE SYNTAX AtmTrafficDescrParamIndex -- Rsyntax INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object identifies the row in the atmTrafficDescrParamTable which applies to the receive direction of the VPL." DEFVAL { 0 } ::= { atmVplEntry 5 } atmVplTransmitTrafficDescrIndex OBJECT-TYPE SYNTAX AtmTrafficDescrParamIndex -- Rsyntax INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object identifies the row in the atmTrafficDescrParamTable which applies to the transmit direction of the VPL." DEFVAL { 0 } ::= { atmVplEntry 6 } atmVplCrossConnectIdentifier OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object is implemented only for a VPL which is cross-connected to other VPLs that belong to the same VPC. All such associated VPLs have the same value of this object, and all their cross-connections are identified by entries in the atmVpCrossConnectTable for which atmVpCrossConnectIndex has the same value. The value of this object is initialized by the agent after the associated entries in the atmVpCrossConnectTable have been created." ::= { atmVplEntry 7 } atmVplRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create, delete or modify a row in this table. To create a new VCL, this object is initially set to 'createAndWait' or 'createAndGo'. This object should not be set to 'active' unless the following columnar objects have been set to their desired value in this row: atmVplReceiveTrafficDescrIndex and atmVplTransmitTrafficDescrIndex." DEFVAL { active } ::= { atmVplEntry 8 } atmVplCastType OBJECT-TYPE SYNTAX AtmConnCastType -- Rsyntax INTEGER { -- p2p(1), -- p2mpRoot(2), -- p2mpLeaf(3) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The connection topology type." DEFVAL { p2p } ::= { atmVplEntry 9 } atmVplConnKind OBJECT-TYPE SYNTAX AtmConnKind -- Rsyntax INTEGER { -- pvc(1), -- svcIncoming(2), -- svcOutgoing(3), -- spvcInitiator(4), -- spvcTarget(5) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The use of call control." DEFVAL { pvc } ::= { atmVplEntry 10 } atmVclTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmVclEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Virtual Channel Link (VCL) table. A bi-directional VCL is modeled as one entry in this table." ::= { atmMIBObjects 7 } atmVclEntry OBJECT-TYPE SYNTAX AtmVclEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the VCL table. This entry is used to model a bi-directional VCL. To create a VCL at an ATM interface, either of the following procedures are used: Negotiated VCL establishment (1) The management application creates a VCL entry in the atmVclTable by setting atmVclRowStatus to createAndWait(5). This may fail for the following reasons: - The selected VPI/VCI values are unavailable, - The selected VPI/VCI values are in use. Otherwise, the agent creates a row and reserves the VPI/VCI values on that port. (2) The manager selects an existing row(s) in the atmTrafficDescrParamTable, thereby, selecting a set of self-consistent ATM traffic parameters and the service category for receive and transmit directions of the VCL. (2a) If no suitable row(s) in the atmTrafficDescrParamTable exists, the manager must create a new row(s) in that table. (2b) The manager characterizes the VCL's traffic parameters through setting the atmVclReceiveTrafficDescrIndex and the atmVclTransmitTrafficDescrIndex values in the VCL table, which point to the rows containing desired ATM traffic parameter values in the atmTrafficDescrParamTable. The agent will check the availability of resources and may refuse the request. If the transmit and receive service categories are inconsistent, the agent should refuse the request. (3) The manager activates the VCL by setting the the atmVclRowStatus to active(1) (for requirements on this activation see the description of atmVclRowStatus). If this set is successful, the agent has reserved the resources to satisfy the requested traffic parameter values and the service category for that VCL. (4) If the VCL terminates a VCC in the ATM host or switch, the manager turns on the atmVclAdminStatus to up(1) to turn the VCL traffic flow on. Otherwise, the atmVcCrossConnectTable must be used to cross-connect the VCL to another VCL(s) in an ATM switch or network. One-Shot VCL Establishment A VCL may also be established in one step by a set-request with all necessary VCL parameter values and atmVclRowStatus set to createAndGo(4). In contrast to the negotiated VCL establishment which allows for detailed error checking (i.e., set errors are explicitly linked to particular resource acquisition failures), the one-shot VCL establishment performs the setup on one operation but does not have the advantage of step-wise error checking. VCL Retirement A VCL is released by setting atmVclRowStatus to destroy(6), and the agent may release all associated resources." INDEX { ifIndex, atmVclVpi, atmVclVci } ::= { atmVclTable 1 } AtmVclEntry ::= SEQUENCE { atmVclVpi AtmVpIdentifier, atmVclVci AtmVcIdentifier, atmVclAdminStatus AtmVorXAdminStatus, atmVclOperStatus AtmVorXOperStatus, atmVclLastChange AtmVorXLastChange, atmVclReceiveTrafficDescrIndex AtmTrafficDescrParamIndex, atmVclTransmitTrafficDescrIndex AtmTrafficDescrParamIndex, atmVccAalType INTEGER, atmVccAal5CpcsTransmitSduSize INTEGER, atmVccAal5CpcsReceiveSduSize INTEGER, atmVccAal5EncapsType INTEGER, atmVclCrossConnectIdentifier INTEGER, atmVclRowStatus RowStatus, atmVclCastType AtmConnCastType, atmVclConnKind AtmConnKind } atmVclVpi OBJECT-TYPE SYNTAX AtmVpIdentifier -- Rsyntax INTEGER(0..4095) ACCESS not-accessible STATUS mandatory DESCRIPTION "The VPI value of the VCL." ::= { atmVclEntry 1 } atmVclVci OBJECT-TYPE SYNTAX AtmVcIdentifier -- Rsyntax INTEGER(0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "The VCI value of the VCL." ::= { atmVclEntry 2 } atmVclAdminStatus OBJECT-TYPE SYNTAX AtmVorXAdminStatus -- Rsyntax INTEGER { -- up(1), -- down(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is implemented only for a VCL which terminates a VCC (i.e., one which is NOT cross-connected to other VCLs). Its value specifies the desired administrative state of the VCL." DEFVAL { down } ::= { atmVclEntry 3 } atmVclOperStatus OBJECT-TYPE SYNTAX AtmVorXOperStatus -- Rsyntax INTEGER { -- up(1), -- down(2), -- unknown(3) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The current operational status of the VCL." ::= { atmVclEntry 4 } atmVclLastChange OBJECT-TYPE SYNTAX AtmVorXLastChange -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime at the time this VCL entered its current operational state." ::= { atmVclEntry 5 } atmVclReceiveTrafficDescrIndex OBJECT-TYPE SYNTAX AtmTrafficDescrParamIndex -- Rsyntax INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object identifies the row in the ATM Traffic Descriptor Table which applies to the receive direction of this VCL." DEFVAL { 0 } ::= { atmVclEntry 6 } atmVclTransmitTrafficDescrIndex OBJECT-TYPE SYNTAX AtmTrafficDescrParamIndex -- Rsyntax INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object identifies the row of the ATM Traffic Descriptor Table which applies to the transmit direction of this VCL." DEFVAL { 0 } ::= { atmVclEntry 7 } atmVccAalType OBJECT-TYPE SYNTAX INTEGER { aal1(1), aal34(2), aal5(3), other(4), unknown(5) } ACCESS read-write STATUS mandatory DESCRIPTION "An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL is in use. The type of AAL used on this VCC. The AAL type includes AAL1, AAL3/4, and AAL5. The other(4) may be user-defined AAL type. The unknown type indicates that the AAL type cannot be determined." DEFVAL { aal5 } ::= { atmVclEntry 8 } atmVccAal5CpcsTransmitSduSize OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The maximum AAL5 CPCS SDU size in octets that is supported on the transmit direction of this VCC." DEFVAL { 9188 } ::= { atmVclEntry 9 } atmVccAal5CpcsReceiveSduSize OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The maximum AAL5 CPCS SDU size in octets that is supported on the receive direction of this VCC." DEFVAL { 9188 } ::= { atmVclEntry 10 } atmVccAal5EncapsType OBJECT-TYPE SYNTAX INTEGER { vcMultiplexRoutedProtocol(1), vcMultiplexBridgedProtocol8023(2), vcMultiplexBridgedProtocol8025(3), vcMultiplexBridgedProtocol8026(4), vcMultiplexLANemulation8023(5), vcMultiplexLANemulation8025(6), llcEncapsulation(7), multiprotocolFrameRelaySscs(8), other(9), unknown(10) } ACCESS read-write STATUS mandatory DESCRIPTION "An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The type of data encapsulation used over the AAL5 SSCS layer. The definitions reference RFC 1483 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation specification." DEFVAL { llcEncapsulation } ::= { atmVclEntry 11 } atmVclCrossConnectIdentifier OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object is implemented only for a VCL which is cross-connected to other VCLs that belong to the same VCC. All such associated VCLs have the same value of this object, and all their cross-connections are identified by entries in the atmVcCrossConnectTable for which atmVcCrossConnectIndex has the same value. The value of this object is initialized by the agent after the associated entries in the atmVcCrossConnectTable have been created." ::= { atmVclEntry 12 } atmVclRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create, delete or modify a row in this table. To create a new VCL, this object is initially set to 'createAndWait' or 'createAndGo'. This object should not be set to 'active' unless the following columnar objects have been set to their desired value in this row: atmVclReceiveTrafficDescrIndex, atmVclTransmitTrafficDescrIndex. In addition, if the local VCL end-point is also the VCC end-point: atmVccAalType. In addition, for AAL5 connections only: atmVccAal5CpcsTransmitSduSize, atmVccAal5CpcsReceiveSduSize, and atmVccAal5EncapsType. (The existence of these objects imply the AAL connection type.)" DEFVAL { active } ::= { atmVclEntry 13 } atmVclCastType OBJECT-TYPE SYNTAX AtmConnCastType -- Rsyntax INTEGER { -- p2p(1), -- p2mpRoot(2), -- p2mpLeaf(3) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The connection topology type." DEFVAL { p2p } ::= { atmVclEntry 14 } atmVclConnKind OBJECT-TYPE SYNTAX AtmConnKind -- Rsyntax INTEGER { -- pvc(1), -- svcIncoming(2), -- svcOutgoing(3), -- spvcInitiator(4), -- spvcTarget(5) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The use of call control." DEFVAL { pvc } ::= { atmVclEntry 15 } atmVpCrossConnectIndexNext OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains an appropriate value to be used for atmVpCrossConnectIndex when creating entries in the atmVpCrossConnectTable. The value 0 indicates that no unassigned entries are available. To obtain the atmVpCrossConnectIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index." ::= { atmMIBObjects 8 } atmVpCrossConnectTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmVpCrossConnectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM VP Cross Connect table. A bi- directional VP cross-connect which cross-connects two VPLs is modeled as one entry in this table." ::= { atmMIBObjects 9 } atmVpCrossConnectEntry OBJECT-TYPE SYNTAX AtmVpCrossConnectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ATM VP Cross Connect table. This entry is used to model a bi-directional ATM VP cross-connect which cross-connects two VPLs. Step-wise Procedures to set up a VP Cross-connect Once the entries in the atmVplTable are created, the following procedures are used to cross-connect the VPLs together. (1) The manager obtains a unique atmVpCrossConnectIndex by reading the atmVpCrossConnectIndexNext object. (2) Next, the manager creates a set of one or more rows in the ATM VP Cross Connect Table, one for each cross-connection between two VPLs. Each row is indexed by the ATM interface port numbers and VPI values of the two ends of that cross-connection. This set of rows specifies the topology of the VPC cross-connect and is identified by a single value of atmVpCrossConnectIndex. Negotiated VP Cross-Connect Establishment (2a) The manager creates a row in this table by setting atmVpCrossConnectRowStatus to createAndWait(5). The agent checks the requested topology and the mutual sanity of the ATM traffic parameters and service categories, i.e., the row creation fails if: - the requested topology is incompatible with associated values of atmVplCastType, - the requested topology is not supported by the agent, - the traffic/service category parameter values associated with the requested row are incompatible with those of already existing rows for this VP cross-connect. [For example, for setting up a point-to-point VP cross-connect, the ATM traffic parameters in the receive direction of a VPL at the low end of the cross-connect must equal to the traffic parameters in the transmit direction of the other VPL at the high end of the cross-connect, otherwise, the row creation fails.] The agent also checks for internal errors in building the cross-connect. The atmVpCrossConnectIndex values in the corresponding atmVplTable rows are filled in by the agent at this point. (2b) The manager promotes the row in the atmVpCrossConnectTable by setting atmVpCrossConnectRowStatus to active(1). If this set is successful, the agent has reserved the resources specified by the ATM traffic parameter and Service category values for each direction of the VP cross-connect in an ATM switch or network. (3) The manager sets the atmVpCrossConnectAdminStatus to up(1) in all rows of this VP cross-connect to turn the traffic flow on. One-Shot VP Cross-Connect Establishment A VP cross-connect may also be established in one step by a set-request with all necessary parameter values and atmVpCrossConnectRowStatus set to createAndGo(4). In contrast to the negotiated VP cross-connect establishment which allows for detailed error checking (i.e., set errors are explicitly linked to particular resource acquisition failures), the one-shot VP cross-connect establishment performs the setup on one operation but does not have the advantage of step-wise error checking. VP Cross-Connect Retirement A VP cross-connect identified by a particular value of atmVpCrossConnectIndex is released by: (1) Setting atmVpCrossConnectRowStatus of all rows identified by this value of atmVpCrossConnectIndex to destroy(6). The agent may release all associated resources, and the atmVpCrossConnectIndex values in the corresponding atmVplTable row are removed. Note that a situation when only a subset of the associated rows are deleted corresponds to a VP topology change. (2) After deletion of the appropriate atmVpCrossConnectEntries, the manager may set atmVplRowStatus to destroy(6) the associated VPLs. The agent releases the resources and removes the associated rows in the atmVplTable. VP Cross-connect Reconfiguration At the discretion of the agent, a VP cross-connect may be reconfigured by adding and/or deleting leafs to/from the VP topology as per the VP cross-connect establishment/retirement procedures. Reconfiguration of traffic/service category parameter values requires release of the VP cross-connect before those parameter values may by changed for individual VPLs." INDEX { atmVpCrossConnectIndex, atmVpCrossConnectLowIfIndex, atmVpCrossConnectLowVpi, atmVpCrossConnectHighIfIndex, atmVpCrossConnectHighVpi } ::= { atmVpCrossConnectTable 1 } AtmVpCrossConnectEntry ::= SEQUENCE { atmVpCrossConnectIndex INTEGER, atmVpCrossConnectLowIfIndex InterfaceIndex, atmVpCrossConnectLowVpi AtmVpIdentifier, atmVpCrossConnectHighIfIndex InterfaceIndex, atmVpCrossConnectHighVpi AtmVpIdentifier, atmVpCrossConnectAdminStatus AtmVorXAdminStatus, atmVpCrossConnectL2HOperStatus AtmVorXOperStatus, atmVpCrossConnectH2LOperStatus AtmVorXOperStatus, atmVpCrossConnectL2HLastChange AtmVorXLastChange, atmVpCrossConnectH2LLastChange AtmVorXLastChange, atmVpCrossConnectRowStatus RowStatus } atmVpCrossConnectIndex OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "A unique value to identify this VP cross-connect." ::= { atmVpCrossConnectEntry 1 } atmVpCrossConnectLowIfIndex OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "The ifIndex value of the ATM interface for this VP cross-connect. The term low implies that this ATM interface has the numerically lower ifIndex value than the other ATM interface identified in the same atmVpCrossConnectEntry." ::= { atmVpCrossConnectEntry 2 } atmVpCrossConnectLowVpi OBJECT-TYPE SYNTAX AtmVpIdentifier -- Rsyntax INTEGER(0..4095) ACCESS not-accessible STATUS mandatory DESCRIPTION "The VPI value at the ATM interface associated with the VP cross-connect that is identified by atmVpCrossConnectLowIfIndex." ::= { atmVpCrossConnectEntry 3 } atmVpCrossConnectHighIfIndex OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "The ifIndex value of the ATM interface for this VP cross-connect. The term high implies that this ATM interface has the numerically higher ifIndex value than the other ATM interface identified in the same atmVpCrossConnectEntry." ::= { atmVpCrossConnectEntry 4 } atmVpCrossConnectHighVpi OBJECT-TYPE SYNTAX AtmVpIdentifier -- Rsyntax INTEGER(0..4095) ACCESS not-accessible STATUS mandatory DESCRIPTION "The VPI value at the ATM interface associated with the VP cross-connect that is identified by atmVpCrossConnectHighIfIndex." ::= { atmVpCrossConnectEntry 5 } atmVpCrossConnectAdminStatus OBJECT-TYPE SYNTAX AtmVorXAdminStatus -- Rsyntax INTEGER { -- up(1), -- down(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The desired administrative status of this bi-directional VP cross-connect." DEFVAL { down } ::= { atmVpCrossConnectEntry 6 } atmVpCrossConnectL2HOperStatus OBJECT-TYPE SYNTAX AtmVorXOperStatus -- Rsyntax INTEGER { -- up(1), -- down(2), -- unknown(3) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The operational status of the VP cross-connect in one direction; (i.e., from the low to high direction)." ::= { atmVpCrossConnectEntry 7 } atmVpCrossConnectH2LOperStatus OBJECT-TYPE SYNTAX AtmVorXOperStatus -- Rsyntax INTEGER { -- up(1), -- down(2), -- unknown(3) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The operational status of the VP cross-connect in one direction; (i.e., from the high to low direction)." ::= { atmVpCrossConnectEntry 8 } atmVpCrossConnectL2HLastChange OBJECT-TYPE SYNTAX AtmVorXLastChange -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime at the time this VP cross-connect entered its current operational state in the low to high direction." ::= { atmVpCrossConnectEntry 9 } atmVpCrossConnectH2LLastChange OBJECT-TYPE SYNTAX AtmVorXLastChange -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime at the time this VP cross-connect entered its current operational in the high to low direction." ::= { atmVpCrossConnectEntry 10 } atmVpCrossConnectRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The status of this entry in the atmVpCrossConnectTable. This object is used to create a cross-connect for cross-connecting VPLs which are created using the atmVplTable or to change or delete an existing cross-connect. This object must be initially set to `createAndWait' or 'createAndGo'. To turn on a VP cross-connect, the atmVpCrossConnectAdminStatus is set to `up'." DEFVAL { active } ::= { atmVpCrossConnectEntry 11 } atmVcCrossConnectIndexNext OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains an appropriate value to be used for atmVcCrossConnectIndex when creating entries in the atmVcCrossConnectTable. The value 0 indicates that no unassigned entries are available. To obtain the atmVpCrossConnectIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index." ::= { atmMIBObjects 10 } atmVcCrossConnectTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmVcCrossConnectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM VC Cross Connect table. A bi- directional VC cross-connect which cross-connects two end points (i.e., VCLs) is modeled as one entry in this table." ::= { atmMIBObjects 11 } atmVcCrossConnectEntry OBJECT-TYPE SYNTAX AtmVcCrossConnectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ATM VC Cross Connect table. This entry is used to model a bi-directional ATM VC cross-connect cross-connecting two end points. Step-wise Procedures to set up a VC Cross-connect Once the entries in the atmVclTable are created, the following procedures are used to cross-connect the VCLs together to form a VCC segment. (1) The manager obtains a unique atmVcCrossConnectIndex by reading the atmVcCrossConnectIndexNext object. (2) Next, the manager creates a set of one or more rows in the ATM VC Cross Connect Table, one for each cross-connection between two VCLs. Each row is indexed by the ATM interface port numbers and VPI/VCI values of the two ends of that cross-connection. This set of rows specifies the topology of the VCC cross-connect and is identified by a single value of atmVcCrossConnectIndex. Negotiated VC Cross-Connect Establishment (2a) The manager creates a row in this table by setting atmVcCrossConnectRowStatus to createAndWait(5). The agent checks the requested topology and the mutual sanity of the ATM traffic parameters and service categories, i.e., the row creation fails if: - the requested topology is incompatible with associated values of atmVclCastType, - the requested topology is not supported by the agent, - the traffic/service category parameter values associated with the requested row are incompatible with those of already existing rows for this VC cross-connect. [For example, for setting up a point-to-point VC cross-connect, the ATM traffic parameters in the receive direction of a VCL at the low end of the cross-connect must equal to the traffic parameters in the transmit direction of the other VCL at the high end of the cross-connect, otherwise, the row creation fails.] The agent also checks for internal errors in building the cross-connect. The atmVcCrossConnectIndex values in the corresponding atmVclTable rows are filled in by the agent at this point. (2b) The manager promotes the row in the atmVcCrossConnectTable by setting atmVcCrossConnectRowStatus to active(1). If this set is successful, the agent has reserved the resources specified by the ATM traffic parameter and Service category values for each direction of the VC cross-connect in an ATM switch or network. (3) The manager sets the atmVcCrossConnectAdminStatus to up(1) in all rows of this VC cross-connect to turn the traffic flow on. One-Shot VC Cross-Connect Establishment A VC cross-connect may also be established in one step by a set-request with all necessary parameter values and atmVcCrossConnectRowStatus set to createAndGo(4). In contrast to the negotiated VC cross-connect establishment which allows for detailed error checking i.e., set errors are explicitly linked to particular resource acquisition failures), the one-shot VC cross-connect establishment performs the setup on one operation but does not have the advantage of step-wise error checking. VC Cross-Connect Retirement A VC cross-connect identified by a particular value of atmVcCrossConnectIndex is released by: (1) Setting atmVcCrossConnectRowStatus of all rows identified by this value of atmVcCrossConnectIndex to destroy(6). The agent may release all associated resources, and the atmVcCrossConnectIndex values in the corresponding atmVclTable row are removed. Note that a situation when only a subset of the associated rows are deleted corresponds to a VC topology change. (2) After deletion of the appropriate atmVcCrossConnectEntries, the manager may set atmVclRowStatus to destroy(6) the associated VCLs. The agent releases the resources and removes the associated rows in the atmVclTable. VC Cross-Connect Reconfiguration At the discretion of the agent, a VC cross-connect may be reconfigured by adding and/or deleting leafs to/from the VC topology as per the VC cross-connect establishment/retirement procedures. Reconfiguration of traffic/service category parameter values requires release of the VC cross-connect before those parameter values may by changed for individual VCLs." INDEX { atmVcCrossConnectIndex, atmVcCrossConnectLowIfIndex, atmVcCrossConnectLowVpi, atmVcCrossConnectLowVci, atmVcCrossConnectHighIfIndex, atmVcCrossConnectHighVpi, atmVcCrossConnectHighVci } ::= { atmVcCrossConnectTable 1 } AtmVcCrossConnectEntry ::= SEQUENCE { atmVcCrossConnectIndex INTEGER, atmVcCrossConnectLowIfIndex InterfaceIndex, atmVcCrossConnectLowVpi AtmVpIdentifier, atmVcCrossConnectLowVci AtmVcIdentifier, atmVcCrossConnectHighIfIndex InterfaceIndex, atmVcCrossConnectHighVpi AtmVpIdentifier, atmVcCrossConnectHighVci AtmVcIdentifier, atmVcCrossConnectAdminStatus AtmVorXAdminStatus, atmVcCrossConnectL2HOperStatus AtmVorXOperStatus, atmVcCrossConnectH2LOperStatus AtmVorXOperStatus, atmVcCrossConnectL2HLastChange AtmVorXLastChange, atmVcCrossConnectH2LLastChange AtmVorXLastChange, atmVcCrossConnectRowStatus RowStatus } atmVcCrossConnectIndex OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "A unique value to identify this VC cross-connect." ::= { atmVcCrossConnectEntry 1 } atmVcCrossConnectLowIfIndex OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "The ifIndex value of the ATM interface for this VC cross-connect. The term low implies that this ATM interface has the numerically lower ifIndex value than the other ATM interface identified in the same atmVcCrossConnectEntry." ::= { atmVcCrossConnectEntry 2 } atmVcCrossConnectLowVpi OBJECT-TYPE SYNTAX AtmVpIdentifier -- Rsyntax INTEGER(0..4095) ACCESS not-accessible STATUS mandatory DESCRIPTION "The VPI value at the ATM interface associated with the VC cross-connect that is identified by atmVcCrossConnectLowIfIndex." ::= { atmVcCrossConnectEntry 3 } atmVcCrossConnectLowVci OBJECT-TYPE SYNTAX AtmVcIdentifier -- Rsyntax INTEGER(0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "The VCI value at the ATM interface associated with this VC cross-connect that is identified by atmVcCrossConnectLowIfIndex." ::= { atmVcCrossConnectEntry 4 } atmVcCrossConnectHighIfIndex OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "The ifIndex value for the ATM interface for this VC cross-connect. The term high implies that this ATM interface has the numerically higher ifIndex value than the other ATM interface identified in the same atmVcCrossConnectEntry." ::= { atmVcCrossConnectEntry 5 } atmVcCrossConnectHighVpi OBJECT-TYPE SYNTAX AtmVpIdentifier -- Rsyntax INTEGER(0..4095) ACCESS not-accessible STATUS mandatory DESCRIPTION "The VPI value at the ATM interface associated with the VC cross-connect that is identified by atmVcCrossConnectHighIfIndex." ::= { atmVcCrossConnectEntry 6 } atmVcCrossConnectHighVci OBJECT-TYPE SYNTAX AtmVcIdentifier -- Rsyntax INTEGER(0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "The VCI value at the ATM interface associated with the VC cross-connect that is identified by atmVcCrossConnectHighIfIndex." ::= { atmVcCrossConnectEntry 7 } atmVcCrossConnectAdminStatus OBJECT-TYPE SYNTAX AtmVorXAdminStatus -- Rsyntax INTEGER { -- up(1), -- down(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The desired administrative status of this bi-directional VC cross-connect." DEFVAL { down } ::= { atmVcCrossConnectEntry 8 } atmVcCrossConnectL2HOperStatus OBJECT-TYPE SYNTAX AtmVorXOperStatus -- Rsyntax INTEGER { -- up(1), -- down(2), -- unknown(3) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The current operational status of the VC cross-connect in one direction; (i.e., from the low to high direction)." ::= { atmVcCrossConnectEntry 9 } atmVcCrossConnectH2LOperStatus OBJECT-TYPE SYNTAX AtmVorXOperStatus -- Rsyntax INTEGER { -- up(1), -- down(2), -- unknown(3) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The current operational status of the VC cross-connect in one direction; (i.e., from the high to low direction)." ::= { atmVcCrossConnectEntry 10 } atmVcCrossConnectL2HLastChange OBJECT-TYPE SYNTAX AtmVorXLastChange -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime at the time this VC cross-connect entered its current operational state in low to high direction." ::= { atmVcCrossConnectEntry 11 } atmVcCrossConnectH2LLastChange OBJECT-TYPE SYNTAX AtmVorXLastChange -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime at the time this VC cross-connect entered its current operational state in high to low direction." ::= { atmVcCrossConnectEntry 12 } atmVcCrossConnectRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The status of this entry in the atmVcCrossConnectTable. This object is used to create a new cross-connect for cross-connecting VCLs which are created using the atmVclTable or to change or delete existing cross-connect. This object must be initially set to `createAndWait' or 'createAndGo'. To turn on a VC cross-connect, the atmVcCrossConnectAdminStatus is set to `up'." DEFVAL { active } ::= { atmVcCrossConnectEntry 13 } aal5VccTable OBJECT-TYPE SYNTAX SEQUENCE OF Aal5VccEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains AAL5 VCC performance parameters." ::= { atmMIBObjects 12 } aal5VccEntry OBJECT-TYPE SYNTAX Aal5VccEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This list contains the AAL5 VCC performance parameters." INDEX { ifIndex, aal5VccVpi, aal5VccVci } ::= { aal5VccTable 1 } Aal5VccEntry ::= SEQUENCE { aal5VccVpi AtmVpIdentifier, aal5VccVci AtmVcIdentifier, aal5VccCrcErrors Counter32, aal5VccSarTimeOuts Counter32, aal5VccOverSizedSDUs Counter32 } aal5VccVpi OBJECT-TYPE SYNTAX AtmVpIdentifier -- Rsyntax INTEGER(0..4095) ACCESS not-accessible STATUS mandatory DESCRIPTION "The VPI value of the AAL5 VCC at the interface identified by the ifIndex." ::= { aal5VccEntry 1 } aal5VccVci OBJECT-TYPE SYNTAX AtmVcIdentifier -- Rsyntax INTEGER(0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "The VCI value of the AAL5 VCC at the interface identified by the ifIndex." ::= { aal5VccEntry 2 } aal5VccCrcErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of AAL5 CPCS PDUs received with CRC-32 errors on this AAL5 VCC at the interface associated with an AAL5 entity." ::= { aal5VccEntry 3 } aal5VccSarTimeOuts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of partially re-assembled AAL5 CPCS PDUs which were discarded on this AAL5 VCC at the interface associated with an AAL5 entity because they were not fully re-assembled within the required time period. If the re-assembly timer is not supported, then this object contains a zero value." ::= { aal5VccEntry 4 } aal5VccOverSizedSDUs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of AAL5 CPCS PDUs discarded on this AAL5 VCC at the interface associated with an AAL5 entity because the AAL5 SDUs were too large." ::= { aal5VccEntry 5 } atmTrafficDescrParamIndexNext OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains an appropriate value to be used for atmTrafficDescrParamIndex when creating entries in the atmTrafficDescrParamTable. The value 0 indicates that no unassigned entries are available. To obtain the atmTrafficDescrParamIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index." ::= { atmMIBObjects 13 } atmInterfaceDs3PlcpGroup OBJECT IDENTIFIER ::= { atmMIBGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing information -- about DS3 PLCP layer at an ATM interface. -- objects -- atmInterfaceDs3PlcpSEFSs, atmInterfaceDs3PlcpAlarmState, -- atmInterfaceDs3PlcpUASs atmInterfaceTCGroup OBJECT IDENTIFIER ::= { atmMIBGroups 4 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing information -- about TC sublayer at an ATM interface. -- objects -- atmInterfaceOCDEvents, atmInterfaceTCAlarmState aal5VccGroup OBJECT IDENTIFIER ::= { atmMIBGroups 9 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing -- AAL5 configuration and performance statistics -- of a VCC. -- objects -- atmVccAal5CpcsTransmitSduSize, atmVccAal5CpcsReceiveSduSize, -- atmVccAal5EncapsType, aal5VccCrcErrors, aal5VccSarTimeOuts, -- aal5VccOverSizedSDUs atmInterfaceConfGroup2 OBJECT IDENTIFIER ::= { atmMIBGroups 10 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing configuration -- information about an ATM interface. -- objects -- atmInterfaceMaxVpcs, atmInterfaceMaxVccs, -- atmInterfaceConfVpcs, atmInterfaceConfVccs, -- atmInterfaceMaxActiveVpiBits, atmInterfaceMaxActiveVciBits, -- atmInterfaceIlmiVpi, atmInterfaceIlmiVci, -- atmInterfaceMyNeighborIpAddress, atmInterfaceMyNeighborIfName, -- atmInterfaceCurrentMaxVpiBits, atmInterfaceCurrentMaxVciBits, -- atmInterfaceSubscrAddress atmTrafficDescrGroup2 OBJECT IDENTIFIER ::= { atmMIBGroups 11 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing information -- about ATM traffic descriptor type and -- the associated parameters. -- objects -- atmTrafficDescrType, atmTrafficDescrParam1, -- atmTrafficDescrParam2, atmTrafficDescrParam3, -- atmTrafficDescrParam4, atmTrafficDescrParam5, -- atmTrafficDescrRowStatus, atmServiceCategory, -- atmTrafficDescrParamIndexNext atmVpcTerminationGroup2 OBJECT IDENTIFIER ::= { atmMIBGroups 12 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing information -- about a VPL at an ATM interface which -- terminates a VPC (i.e., one which is NOT -- cross-connected to other VPLs). -- objects -- atmVplOperStatus, atmVplAdminStatus, atmVplLastChange, -- atmVplReceiveTrafficDescrIndex, -- atmVplTransmitTrafficDescrIndex, atmVplRowStatus, -- atmVplCastType, atmVplConnKind atmVccTerminationGroup2 OBJECT IDENTIFIER ::= { atmMIBGroups 13 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing information -- about a VCL at an ATM interface -- which terminates a VCC (i.e., one which is -- NOT cross-connected to other VCLs). -- objects -- atmVclOperStatus, atmVclAdminStatus, atmVclLastChange, -- atmVclReceiveTrafficDescrIndex, -- atmVclTransmitTrafficDescrIndex, atmVccAalType, -- atmVclRowStatus, atmVclCastType, atmVclConnKind atmVplCrossConnectGroup OBJECT IDENTIFIER ::= { atmMIBGroups 14 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing -- information about the VPLs that -- are cross-connected together. -- objects -- atmVplReceiveTrafficDescrIndex, -- atmVplTransmitTrafficDescrIndex, atmVplOperStatus, -- atmVplRowStatus, atmVplCastType, atmVplConnKind atmVpPvcCrossConnectGroup OBJECT IDENTIFIER ::= { atmMIBGroups 15 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing -- information about a VP cross-connect -- for PVCs. These objects are not used -- for Soft PVCs or SVCs. -- objects -- atmVpCrossConnectAdminStatus, atmVpCrossConnectL2HOperStatus, -- atmVpCrossConnectH2LOperStatus, -- atmVpCrossConnectL2HLastChange, -- atmVpCrossConnectH2LLastChange, atmVpCrossConnectRowStatus, -- atmVplCrossConnectIdentifier, atmVpCrossConnectIndexNext atmVclCrossConnectGroup OBJECT IDENTIFIER ::= { atmMIBGroups 16 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing -- information about the VCLs that -- are cross-connected together. -- objects -- atmVclReceiveTrafficDescrIndex, -- atmVclTransmitTrafficDescrIndex, atmVclOperStatus, -- atmVclRowStatus, atmVclCastType, atmVclConnKind atmVcPvcCrossConnectGroup OBJECT IDENTIFIER ::= { atmMIBGroups 17 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing -- information about a VC cross-connect -- for PVCs. These objects are not used -- for Soft PVCs or SVCs. -- objects -- atmVcCrossConnectAdminStatus, atmVcCrossConnectL2HOperStatus, -- atmVcCrossConnectH2LOperStatus, -- atmVcCrossConnectL2HLastChange, -- atmVcCrossConnectH2LLastChange, atmVcCrossConnectRowStatus, -- atmVclCrossConnectIdentifier, atmVcCrossConnectIndexNext atmInterfaceConfGroup OBJECT IDENTIFIER ::= { atmMIBGroups 1 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- A collection of objects providing configuration -- information about an ATM interface. -- objects -- atmInterfaceMaxVpcs, atmInterfaceMaxVccs, -- atmInterfaceConfVpcs, atmInterfaceConfVccs, -- atmInterfaceMaxActiveVpiBits, atmInterfaceMaxActiveVciBits, -- atmInterfaceIlmiVpi, atmInterfaceIlmiVci, -- atmInterfaceAddressType, atmInterfaceAdminAddr, -- atmInterfaceMyNeighborIpAddress, atmInterfaceMyNeighborIfName atmTrafficDescrGroup OBJECT IDENTIFIER ::= { atmMIBGroups 2 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- A collection of objects providing information -- about ATM traffic descriptor type and -- the associated parameters. -- objects -- atmTrafficDescrType, atmTrafficDescrParam1, -- atmTrafficDescrParam2, atmTrafficDescrParam3, -- atmTrafficDescrParam4, atmTrafficDescrParam5, -- atmTrafficQoSClass, atmTrafficDescrRowStatus atmVpcTerminationGroup OBJECT IDENTIFIER ::= { atmMIBGroups 5 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- A collection of objects providing -- information about a VPL at an ATM interface -- which terminates a VPC -- (i.e., one which is NOT cross-connected -- to other VPLs). -- objects -- atmVplOperStatus, atmVplAdminStatus, atmVplLastChange, -- atmVplReceiveTrafficDescrIndex, -- atmVplTransmitTrafficDescrIndex, atmVplRowStatus atmVccTerminationGroup OBJECT IDENTIFIER ::= { atmMIBGroups 6 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- A collection of objects providing information -- about a VCL at an ATM interface -- which terminates a VCC (i.e., one which is -- NOT cross-connected to other VCLs). -- objects -- atmVclOperStatus, atmVclAdminStatus, atmVclLastChange, -- atmVclReceiveTrafficDescrIndex, -- atmVclTransmitTrafficDescrIndex, atmVccAalType, -- atmVclRowStatus atmVpCrossConnectGroup OBJECT IDENTIFIER ::= { atmMIBGroups 7 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- A collection of objects providing -- information about a VP cross-connect -- and the associated VPLs that are -- cross-connected together. -- objects -- atmVplReceiveTrafficDescrIndex, -- atmVplTransmitTrafficDescrIndex, atmVplOperStatus, -- atmVplRowStatus, atmVpCrossConnectAdminStatus, -- atmVpCrossConnectL2HOperStatus, -- atmVpCrossConnectH2LOperStatus, -- atmVpCrossConnectL2HLastChange, -- atmVpCrossConnectH2LLastChange, atmVpCrossConnectRowStatus, -- atmVplCrossConnectIdentifier, atmVpCrossConnectIndexNext atmVcCrossConnectGroup OBJECT IDENTIFIER ::= { atmMIBGroups 8 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- A collection of objects providing -- information about a VC cross-connect -- and the associated VCLs that are -- cross-connected together. -- objects -- atmVclReceiveTrafficDescrIndex, -- atmVclTransmitTrafficDescrIndex, atmVclOperStatus, -- atmVclRowStatus, atmVcCrossConnectAdminStatus, -- atmVcCrossConnectL2HOperStatus, -- atmVcCrossConnectH2LOperStatus, -- atmVcCrossConnectL2HLastChange, -- atmVcCrossConnectH2LLastChange, atmVcCrossConnectRowStatus, -- atmVclCrossConnectIdentifier, atmVcCrossConnectIndexNext atmMIBCompliance2 OBJECT IDENTIFIER ::= { atmMIBCompliances 2 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for SNMP entities -- including networks which have ATM and -- AAL5 interfaces. -- Module -- >>current<< -- MandGroup -- atmInterfaceConfGroup2 -- MandGroup -- atmTrafficDescrGroup2 -- ObjVar -- atmInterfaceMaxVpcs -- ObjVar -- atmInterfaceMaxVccs -- ObjVar -- atmInterfaceMaxActiveVpiBits -- ObjVar -- atmInterfaceMaxActiveVciBits -- ObjVar -- atmInterfaceIlmiVpi -- ObjVar -- atmInterfaceIlmiVci -- ObjVar -- atmInterfaceMyNeighborIpAddress -- ObjVar -- atmInterfaceMyNeighborIfName -- ObjVar -- atmInterfaceSubscrAddress -- ObjVar -- atmTrafficDescrParamIndexNext -- ObjVar -- atmTrafficDescrType -- ObjVar -- atmTrafficDescrParam1 -- ObjVar -- atmTrafficDescrParam2 -- ObjVar -- atmTrafficDescrParam3 -- ObjVar -- atmTrafficDescrParam4 -- ObjVar -- atmTrafficDescrParam5 -- ObjVar -- atmServiceCategory -- ObjVar -- atmTrafficDescrRowStatus -- OptGroup -- atmInterfaceDs3PlcpGroup -- OptGroup -- atmInterfaceTCGroup -- OptGroup -- atmVpcTerminationGroup2 -- OptGroup -- atmVplCrossConnectGroup -- OptGroup -- atmVpPvcCrossConnectGroup -- ObjVar -- atmVplAdminStatus -- ObjVar -- atmVplReceiveTrafficDescrIndex -- ObjVar -- atmVplTransmitTrafficDescrIndex -- ObjVar -- atmVplRowStatus -- ObjVar -- atmVplCastType -- ObjVar -- atmVplConnKind -- ObjVar -- atmVpCrossConnectAdminStatus -- ObjVar -- atmVpCrossConnectRowStatus -- OptGroup -- atmVccTerminationGroup2 -- OptGroup -- atmVclCrossConnectGroup -- OptGroup -- atmVcPvcCrossConnectGroup -- ObjVar -- atmVclAdminStatus -- ObjVar -- atmVclReceiveTrafficDescrIndex -- ObjVar -- atmVclTransmitTrafficDescrIndex -- ObjVar -- atmVccAalType -- ObjVar -- atmVclRowStatus -- ObjVar -- atmVclCastType -- ObjVar -- atmVclConnKind -- ObjVar -- atmVcCrossConnectAdminStatus -- ObjVar -- atmVcCrossConnectRowStatus -- OptGroup -- aal5VccGroup -- ObjVar -- atmVccAal5CpcsTransmitSduSize -- ObjVar -- atmVccAal5CpcsReceiveSduSize -- ObjVar -- atmVccAal5EncapsType atmMIBCompliance OBJECT IDENTIFIER ::= { atmMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- The compliance statement for SNMP entities -- including networks which have ATM and -- AAL5 interfaces. -- Module -- >>current<< -- MandGroup -- atmInterfaceConfGroup -- MandGroup -- atmTrafficDescrGroup -- ObjVar -- atmInterfaceMaxVpcs -- ObjVar -- atmInterfaceMaxVccs -- ObjVar -- atmInterfaceMaxActiveVpiBits -- ObjVar -- atmInterfaceMaxActiveVciBits -- ObjVar -- atmInterfaceIlmiVpi -- ObjVar -- atmInterfaceIlmiVci -- ObjVar -- atmInterfaceMyNeighborIpAddress -- ObjVar -- atmInterfaceMyNeighborIfName -- ObjVar -- atmTrafficDescrType -- ObjVar -- atmTrafficDescrParam1 -- ObjVar -- atmTrafficDescrParam2 -- ObjVar -- atmTrafficDescrParam3 -- ObjVar -- atmTrafficDescrParam4 -- ObjVar -- atmTrafficDescrParam5 -- ObjVar -- atmTrafficQoSClass -- ObjVar -- atmTrafficDescrRowStatus -- OptGroup -- atmInterfaceDs3PlcpGroup -- OptGroup -- atmInterfaceTCGroup -- OptGroup -- atmVpcTerminationGroup -- OptGroup -- atmVpCrossConnectGroup -- ObjVar -- atmVplAdminStatus -- ObjVar -- atmVplReceiveTrafficDescrIndex -- ObjVar -- atmVplTransmitTrafficDescrIndex -- ObjVar -- atmVplRowStatus -- ObjVar -- atmVpCrossConnectAdminStatus -- ObjVar -- atmVpCrossConnectRowStatus -- OptGroup -- atmVccTerminationGroup -- OptGroup -- atmVcCrossConnectGroup -- ObjVar -- atmVclAdminStatus -- ObjVar -- atmVclReceiveTrafficDescrIndex -- ObjVar -- atmVclTransmitTrafficDescrIndex -- ObjVar -- atmVccAalType -- ObjVar -- atmVclRowStatus -- ObjVar -- atmVcCrossConnectAdminStatus -- ObjVar -- atmVcCrossConnectRowStatus -- OptGroup -- aal5VccGroup -- ObjVar -- atmVccAal5CpcsTransmitSduSize -- ObjVar -- atmVccAal5CpcsReceiveSduSize -- ObjVar -- atmVccAal5EncapsType END