-- File: callmgmt.mib -- Bay Networks Remote Annex Private Enterprise MIB -- -- Copyright 1997 Bay Networks, Inc. ALL RIGHTS RESERVED. -- -- ALL RIGHTS RESERVED. Licensed Material - Property of Bay Networks, Inc. -- This software is made available solely pursuant to the terms of a -- software license agreement which governs its use. -- Unauthorized duplication, distribution or sale are strictly prohibited. -- -- This information is subject to change without notice, and should -- not be construed as a commitment by Bay Networks, Inc. Bay Networks, Inc., -- assumes no responsibility for any errors that may appear in this -- document. -- -- $Id: -- -- overview XYLO-CALLMGMT-MIB DEFINITIONS ::= BEGIN IMPORTS Counter FROM RFC1155-SMI DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 anxt1ChanIndex, anxt1ChanNumber FROM XYLO-WAN-MIB mdmNumber FROM XYLO-MODEM-MIB callmgmt FROM XYLO-MIB-SMI; -- xylogics OBJECT IDENTIFIER ::= { enterprises 15 } -- callmgmt OBJECT IDENTIFIER ::= { annex 16 } activecall OBJECT IDENTIFIER ::= { callmgmt 1 } callHist OBJECT IDENTIFIER ::= { callmgmt 2 } -- modem call statistics MIB objects. mdmCallStatsObjects OBJECT IDENTIFIER ::= { callmgmt 3 } -- Port action objects portaction OBJECT IDENTIFIER ::= { callmgmt 4 } -- This table is no longer supported. Please design/change your -- applications to use the new actCallTable below (under activecall 2). activecallTable OBJECT-TYPE SYNTAX SEQUENCE OF ActivecallEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A table of active call information." ::= { activecall 1 } activecallEntry OBJECT-TYPE SYNTAX ActivecallEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A row in the active call table." INDEX { anxt1ChanIndex, anxt1ChanNumber } ::= { activecallTable 1 } ActivecallEntry ::= SEQUENCE { actcallUsername DisplayString, actcallCallingNumber DisplayString, actcallCalledNumber DisplayString, actcallSPBName DisplayString, actcallDeviceType INTEGER, actcallDeviceNumber INTEGER, actcallSubAddress DisplayString, actcallBearer INTEGER, actcallSetupTime INTEGER, actcallDuration INTEGER, actcalllocalin DisplayString, actcallremotein DisplayString, actcalllocalat DisplayString, actcallremoteat DisplayString, actcalllocalipx DisplayString, actcallremoteipx DisplayString, actcallConnectionType INTEGER, actcallOctetsRx Counter, actcallOctetsTx Counter, actcallOrigin INTEGER, actcallCallState INTEGER, actcallConfiguredType INTEGER, actcallOwningBundle INTEGER } actcallUsername OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS deprecated DESCRIPTION "Name of the user associated with this call. A null string is returned if the call is active but the current user name cannot be determined at the time of the call." ::= { activecallEntry 1 } actcallCallingNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..29)) ACCESS read-only STATUS deprecated DESCRIPTION "The number from which this call was made. Can be a null string. This object obsoletes the callSetupCallingNbr object." ::= { activecallEntry 2 } actcallCalledNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..29)) ACCESS read-only STATUS deprecated DESCRIPTION "The number to which this call was made. Can be a null string. This object obsoletes the callSetupCalledNbr object." ::= { activecallEntry 3 } actcallSPBName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..29)) ACCESS read-only STATUS deprecated DESCRIPTION "Session Parameter Block name. The RAC determines how to handle a call through the SPB. The SPB is defined in the configuration file. When a call comes in, the RAC tries to match the received setup information elements that accompanied the call with the values in the setup criteria section of the defined SPBs. The first SPB that matches the call's setup criteria is used." ::= { activecallEntry 4 } actcallDeviceType OBJECT-TYPE SYNTAX INTEGER { asy(1), syn(9), ta(10), mp(12) -- nocall('7fffffff'h) } ACCESS read-only STATUS deprecated DESCRIPTION "An enumerated integer indicating the port type. asy(1) - the call is assigned internally to an asynchronous device (async port). syn(9) - the call is handled internally by a synchronous device (sync port). ta(10) - the call is handled internally by a ta device (ta port). mp(12) - pseudo-session, Multi-link PPP bundle head. This object obsoletes the callSetupPortType object." ::= { activecallEntry 5 } actcallDeviceNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The one-based device (port) number the call is assigned to. This object in conjunction with the object, actcallDeviceType, should be used to cross-reference the information displayed by the CLI command 'who'. This object obsoletes the callSetupPortNumber object." ::= { activecallEntry 6 } actcallSubAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..29)) ACCESS read-only STATUS deprecated DESCRIPTION "The subaddress this call is connected to. Can be a null string. This object obsoletes the callSetupCalledSubAddr object." ::= { activecallEntry 7 } actcallBearer OBJECT-TYPE SYNTAX INTEGER { missing(1), voice(2), data(3) -- nocall('7fffffff'h) } ACCESS read-only STATUS deprecated DESCRIPTION "This object defines the bearer capability of the incoming call. This object obsoletes the callSetupBearer object." ::= { activecallEntry 8 } actcallSetupTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The time that the call started. This is RAC system time, which is the same as Unix system time: seconds since 0:00 January 1, 1970 UTC (GMT). This object obsoletes callSetupCallingTime." ::= { activecallEntry 9 } actcallDuration OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Duration of the phone call, in seconds." ::= { activecallEntry 10 } actcalllocalin OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS deprecated DESCRIPTION "The Internet (IP) address assigned to the RAC end of a point-to-point link established during this call, in dotted-decimal notation." ::= { activecallEntry 11 } actcallremotein OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS deprecated DESCRIPTION "The Internet (IP) address assigned to the far end of a point-to-point link established during this call, in dotted-decimal notation." ::= { activecallEntry 12 } actcalllocalat OBJECT-TYPE SYNTAX DisplayString (SIZE (0..13)) ACCESS read-only STATUS deprecated DESCRIPTION "The local AppleTalk address assigned to this call." ::= { activecallEntry 13 } actcallremoteat OBJECT-TYPE SYNTAX DisplayString (SIZE (0..13)) ACCESS read-only STATUS deprecated DESCRIPTION "The remote AppleTalk address assigned to this call." ::= { activecallEntry 14 } actcalllocalipx OBJECT-TYPE SYNTAX DisplayString (SIZE (21)) ACCESS read-only STATUS deprecated DESCRIPTION "The local IPX address assigned to this call." ::= { activecallEntry 15 } actcallremoteipx OBJECT-TYPE SYNTAX DisplayString (SIZE (21)) ACCESS read-only STATUS deprecated DESCRIPTION "The remote IPX address assigned to this call." ::= { activecallEntry 16 } actcallConnectionType OBJECT-TYPE SYNTAX INTEGER { none(1), cli(2), server(3), rdp(4), slip(5), dedicated(6), ldp(7), ppp(8), mp(9), arap(10), ftp(11), ndp(12), ipx(13), dynamic-dial(14), vpn(15), ppp-sublet-from-cli(16) } ACCESS read-only STATUS deprecated DESCRIPTION "The name of the client routine running on the port at the time of this call." ::= { activecallEntry 17 } actcallOctetsRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The number of octets received during this call." ::= { activecallEntry 18 } actcallOctetsTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The number of octets transmitted during this call." ::= { activecallEntry 19 } actcallOrigin OBJECT-TYPE SYNTAX INTEGER { incoming(1), outgoing(2) -- nocall('7fffffff'h) } ACCESS read-only STATUS deprecated DESCRIPTION "The call origin. incoming(1) - the RAC answered an incoming call. outgoing(2) - the RAC made the call. This object obsoletes the callSetupCallType object." ::= { activecallEntry 20 } actcallCallState OBJECT-TYPE SYNTAX INTEGER { invalid(1), valid(2) } ACCESS read-only STATUS deprecated DESCRIPTION "The current state of this call. invalid(1)-call is inactive and the contents of this table row are not valid. valid(2)- call is active and contents of this table row are valid." ::= { activecallEntry 21 } actcallConfiguredType OBJECT-TYPE SYNTAX INTEGER { cli(1), slave(2), adaptive(3), unused(4), slip(5), dedicated(6), ppp(7), arap(8), printer(9), auto-detect(10), auto-adapt(11), ndp(12), ipx(13), call(14), connect(15), rlogin(16), telnet(17), tn3270(18), any(19) -- nocall('7fffffff'h) } ACCESS read-only STATUS deprecated DESCRIPTION "The type (mode) of the port at the time of the connection. cli - allows an incoming session access to the CLI. The CLI provides access to the network and connections to other hosts via the telnet, connect, rlogin and tn3270 commands. slip - allows a port to perform as a network interface using SLIP. IP packets are encapsulated by SLIP. ppp - allows a port to perform as a network interface using PPP. Packets of several protocols are encapsulated by PPP. arap - allows a port to perform as a network interface using ARAP. slave - allows a port to accept TCP connections over the network. connect - allows a port to communicate with a LAT host via the connect command. rlogin - allows a port to communicate via the rlogin command. telnet - allows a port to communicate via the telnet command. tn3270 - allows a port to communicate via the tn3270 command." ::= { activecallEntry 22 } actcallOwningBundle OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The identifier of the MP bundle that owns this PPP link." ::= { activecallEntry 23 } -- actCallTable has replaced activecallTable. The -- new table is be indexed by the deviceType and the deviceNumber rather -- than wan and channel. This will make it possible to get information -- for virtual devices such as MP, VPN etc... -- Another major difference is that it is now a sparse table. actCallTable OBJECT-TYPE SYNTAX SEQUENCE OF ActCallEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of active call information." ::= { activecall 2 } actCallEntry OBJECT-TYPE SYNTAX ActCallEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row in the active call table." INDEX { activeCallDeviceType, activeCallDeviceNumber } ::= { actCallTable 1 } ActCallEntry ::= SEQUENCE { activeCallDeviceType INTEGER, activeCallDeviceNumber INTEGER, activeCallUsername DisplayString, activeCallCallingNumber DisplayString, activeCallCalledNumber DisplayString, activeCallSPBName DisplayString, activeCallSubAddress DisplayString, activeCallBearer INTEGER, activeCallSetupTime INTEGER, activeCallDuration INTEGER, activeCalllocalin DisplayString, activeCallremotein DisplayString, activeCalllocalipx DisplayString, activeCallremoteipx DisplayString, activeCallConnectionType INTEGER, activeCallOctetsRx Counter, activeCallOctetsTx Counter, activeCallOrigin INTEGER, activeCallCallState INTEGER, activeCallConfiguredType INTEGER, activeCallOwningBundle INTEGER, activeCallWanIndex INTEGER, activeCallChanIndex INTEGER, activeCallLocalAt DisplayString, activeCallRemoteAt DisplayString } activeCallDeviceType OBJECT-TYPE SYNTAX INTEGER { asy(1), syn(9), ta(10), mp(12), vpn(13), gen-sync-port(14) } ACCESS read-only STATUS mandatory DESCRIPTION "An enumerated integer indicating the port type. asy(1) - the call is assigned internally to an asynchronous device (async port). syn(9) - the call is handled internally by a synchronous device (sync port). ta(10) - the call is handled internally by a ta device (ta port). mp(12) - pseudo-session, Multi-link PPP bundle head. vpn(13) - Virtual Private Network. gen-sync(14) - General Sync port. This object obsoletes the callSetupPortType object." ::= { actCallEntry 1 } activeCallDeviceNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The one-based device (port) number the call is assigned to. This object in conjunction with the object, actcallDeviceType, should be used to cross-reference the information displayed by the CLI command 'who'. This object obsoletes the callSetupPortNumber object." ::= { actCallEntry 2 } activeCallUsername OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "Name of the user associated with this call. A null string is returned if the call is active but the current user name cannot be determined at the time of the call." ::= { actCallEntry 3 } activeCallCallingNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The number from which this call was made. Can be a null string. This object obsoletes the callSetupCallingNbr object." ::= { actCallEntry 4 } activeCallCalledNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The number to which this call was made. Can be a null string. This object obsoletes the callSetupCalledNbr object." ::= { actCallEntry 5 } activeCallSPBName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "Session Parameter Block name. The RAC determines how to handle a call through the SPB. The SPB is defined in the configuration file. When a call comes in, the RAC tries to match the received setup information elements that accompanied the call with the values in the setup criteria section of the defined SPBs. The first SPB that matches the call's setup criteria is used." ::= { actCallEntry 6 } activeCallSubAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The subaddress this call is connected to. Can be a null string. This object obsoletes the callSetupCalledSubAddr object." ::= { actCallEntry 7 } activeCallBearer OBJECT-TYPE SYNTAX INTEGER { missing(1), voice(2), data(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object defines the bearer capability of the incoming call. This object obsoletes the callSetupBearer object." ::= { actCallEntry 8 } activeCallSetupTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The time that the call started. This is RAC system time, which is the same as Unix system time: seconds since 0:00 January 1, 1970 UTC (GMT). This object obsoletes callSetupCallingTime." ::= { actCallEntry 9 } activeCallDuration OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Duration of the phone call, in seconds." ::= { actCallEntry 10 } activeCalllocalin OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "The Internet (IP) address assigned to the RAC end of a point-to-point link established during this call, in dotted-decimal notation." ::= { actCallEntry 11 } activeCallremotein OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "The Internet (IP) address assigned to the far end of a point-to-point link established during this call, in dotted-decimal notation." ::= { actCallEntry 12 } activeCalllocalipx OBJECT-TYPE SYNTAX DisplayString (SIZE (21)) ACCESS read-only STATUS mandatory DESCRIPTION "The local IPX address assigned to this call." ::= { actCallEntry 13 } activeCallremoteipx OBJECT-TYPE SYNTAX DisplayString (SIZE (21)) ACCESS read-only STATUS mandatory DESCRIPTION "The remote IPX address assigned to this call." ::= { actCallEntry 14 } activeCallConnectionType OBJECT-TYPE SYNTAX INTEGER { none(1), cli(2), server(3), rdp(4), slip(5), dedicated(6), ldp(7), ppp(8), mp(9), arap(10), ftp(11), ndp(12), ipx(13), dynamic-dial(14), vpn(15), ppp-sublet-from-cli(16) } ACCESS read-only STATUS mandatory DESCRIPTION "The name of the client routine running on the port at the time of this call." ::= { actCallEntry 15 } activeCallOctetsRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of octets received during this call." ::= { actCallEntry 16 } activeCallOctetsTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of octets transmitted during this call." ::= { actCallEntry 17 } activeCallOrigin OBJECT-TYPE SYNTAX INTEGER { incoming(1), outgoing(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The call origin. incoming(1) - the RAC answered an incoming call. outgoing(2) - the RAC made the call. This object obsoletes the callSetupCallType object." ::= { actCallEntry 18 } activeCallCallState OBJECT-TYPE SYNTAX INTEGER { invalid(1), valid(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of this call. invalid(1)-call is inactive and the contents of this table row are not valid. valid(2)- call is active and contents of this table row are valid." ::= { actCallEntry 19 } activeCallConfiguredType OBJECT-TYPE SYNTAX INTEGER { cli(1), slave(2), adaptive(3), unused(4), slip(5), dedicated(6), ppp(7), arap(8), printer(9), auto-detect(10), auto-adapt(11), ndp(12), ipx(13), call(14), connect(15), rlogin(16), telnet(17), tn3270(18), any(19) } ACCESS read-only STATUS mandatory DESCRIPTION "The type (mode) of the port at the time of the connection. cli - allows an incoming session access to the CLI. The CLI provides access to the network and connections to other hosts via the telnet, connect, rlogin and tn3270 commands. slip - allows a port to perform as a network interface using SLIP. IP packets are encapsulated by SLIP. ppp - allows a port to perform as a network interface using PPP. Packets of several protocols are encapsulated by PPP. arap - allows a port to perform as a network interface using ARAP. slave - allows a port to accept TCP connections over the network. connect - allows a port to communicate with a LAT host via the connect command. rlogin - allows a port to communicate via the rlogin command. telnet - allows a port to communicate via the telnet command. tn3270 - allows a port to communicate via the tn3270 command." ::= { actCallEntry 20 } activeCallOwningBundle OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of the MP bundle that owns this PPP link. This number will always be the same as the mp device number. For example, mp17 devtype will have a owningBundle number of 17" ::= { actCallEntry 21 } activeCallWanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The wan interface number" ::= { actCallEntry 22 } activeCallChanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The channel number" ::= { actCallEntry 23 } activeCallLocalAt OBJECT-TYPE SYNTAX DisplayString (SIZE (0..13)) ACCESS read-only STATUS mandatory DESCRIPTION "The local AppleTalk address assigned to this call." ::= { actCallEntry 24 } activeCallRemoteAt OBJECT-TYPE SYNTAX DisplayString (SIZE (0..13)) ACCESS read-only STATUS mandatory DESCRIPTION "The remote AppleTalk address assigned to this call." ::= { actCallEntry 25 } -- Returns active modem call statistics actCallAsyTable OBJECT-TYPE SYNTAX SEQUENCE OF ActCallAsyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of modem call statistics indexed by the async device number (which is identical to the modem number)" ::= { activecall 3 } actCallAsyEntry OBJECT-TYPE SYNTAX ActCallAsyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row in the modem call statistics table." INDEX { activeCallDeviceNumber } ::= { actCallAsyTable 1 } ActCallAsyEntry ::= SEQUENCE { activeCallAsyBeginRxSpeed INTEGER, activeCallAsyCurrRxSpeed INTEGER, activeCallAsyBeginTxSpeed INTEGER, activeCallAsyCurrTxSpeed INTEGER, activeCallAsyTxBaudRate INTEGER, activeCallAsyRxBaudRate INTEGER, activeCallAsyCurrSignalQ INTEGER, activeCallAsyBeginRxLineLevel INTEGER, activeCallAsyCurrRxLineLevel INTEGER, activeCallAsyErrorProtocol INTEGER, activeCallAsyCompressionProtocol INTEGER, activeCallAsyTxPackets Counter, activeCallAsyTxPacketError Counter, activeCallAsyRxPackets Counter, activeCallAsyRxPacketError Counter, activeCallAsyRetrainReqSent Counter, activeCallAsyRetrainReqReceived Counter, activeCallAsyRRNReqReceived Counter, activeCallAsyRRNReqSent Counter, activeCallAsyRoundTripDelay INTEGER, activeCallAsyFarEndEchoFreq INTEGER, activeCallAsyFarEndEchoLevel INTEGER, activeCallAsyChanFreqOffset INTEGER, activeCallAsyOscFreqOffset INTEGER, activeCallAsySNR INTEGER, activeCallAsyx2Status INTEGER, activeCallAsyx2RbsStatus INTEGER, activeCallAsyx2DigitalPadStatus INTEGER, activeCallAsyk56Status INTEGER, activeCallAsyk56RbsStatus INTEGER, activeCallAsyk56DigitalPadStatus INTEGER, activeCallAsyk56Version INTEGER, activeCallAsyWANUnitNumber INTEGER, activeCallAsyChannel INTEGER, activeCallAsyCurrModulation INTEGER, activeCallAsyCurrPumpState INTEGER, activeCallAsyx2SpeedReduction INTEGER, activeCallAsyk56SpeedReduction INTEGER, activeCallAsyV90Status INTEGER, activeCallAsyV90ConstellationIndex0 INTEGER, activeCallAsyV90ConstellationIndex1 INTEGER, activeCallAsyV90ConstellationIndex2 INTEGER, activeCallAsyV90ConstellationIndex3 INTEGER, activeCallAsyV90ConstellationIndex4 INTEGER, activeCallAsyV90ConstellationIndex5 INTEGER, activeCallAsyV90PADStatus INTEGER, activeCallAsyV90ShapingBits INTEGER, activeCallAsyV90LookAhead INTEGER, activeCallAsyV90ConstellationPower INTEGER, activeCallAsyV90HalfDuplexRRNRx INTEGER } -- reserved { activeCallAsyEntry 1 } -- reserved { activeCallAsyEntry 2 } activeCallAsyBeginRxSpeed OBJECT-TYPE SYNTAX INTEGER { bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54) } ACCESS read-only STATUS mandatory DESCRIPTION "The receive connect speed at the time the call was established. Note: The agent will return zero if the modem is not in a busy state." ::= { actCallAsyEntry 3 } activeCallAsyCurrRxSpeed OBJECT-TYPE SYNTAX INTEGER { bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54) } ACCESS read-only STATUS mandatory DESCRIPTION "The current receive connect speed of the call." ::= { actCallAsyEntry 4 } activeCallAsyBeginTxSpeed OBJECT-TYPE SYNTAX INTEGER { bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54) } ACCESS read-only STATUS mandatory DESCRIPTION "The transmit connect speed at the time the call was established. Note: The agent will return zero if the modem is not in a busy state." ::= { actCallAsyEntry 5 } activeCallAsyCurrTxSpeed OBJECT-TYPE SYNTAX INTEGER { bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54) } ACCESS read-only STATUS mandatory DESCRIPTION "The current transmit connect speed of the call." ::= { actCallAsyEntry 6 } activeCallAsyTxBaudRate OBJECT-TYPE SYNTAX INTEGER { r2400(1), r2743(2), r2800(3), r3000(4), r3200(5), r3429(6), r8000(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The rate at which symbols that carry data are generated. Symbol rate limits and options apply to the modem v.34. Default is r2400(1)." ::= { actCallAsyEntry 7 } activeCallAsyRxBaudRate OBJECT-TYPE SYNTAX INTEGER { r2400(1), r2743(2), r2800(3), r3000(4), r3200(5), r3429(6), r8000(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The rate at which symbols that carry data are received. Symbol rate limits and options apply to the modem v.34. Default is r2400(1)." ::= { actCallAsyEntry 8 } -- activeCallAsyBeginSignalQ { actCallAsyEntry 9 } removed activeCallAsyCurrSignalQ OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Current line signal quality. This is a unitless number derived from several line characteristics. Range is 0-255; 0 is good. 30 or less is reasonable." ::= { actCallAsyEntry 10 } activeCallAsyBeginRxLineLevel OBJECT-TYPE SYNTAX INTEGER (0..45) ACCESS read-only STATUS mandatory DESCRIPTION "The receive signal level at the beginning of the call, in dBm (ratio of receive level to a reference value). The number returned by this MIB object is positive, but it represents a negative number (ie, this object returns the negative of the actual dBm). Expected values are roughly -12 to -30. Less than -11 is bad; that signal is too strong, and causes problems for the modem." ::= { actCallAsyEntry 11 } activeCallAsyCurrRxLineLevel OBJECT-TYPE SYNTAX INTEGER (0..45) ACCESS read-only STATUS mandatory DESCRIPTION "The current receive signal level of the call, in dBm (ratio of receive level to a reference value). The number returned by this MIB object is positive, but it represents a negative number (ie, this object returns the negative of the actual dBm). Expected values are roughly -12 to -30. Less than -11 is bad; that signal is too strong, and causes problems for the modem." ::= { actCallAsyEntry 12 } -- activeCallAsyBeginSignalQ { actCallAsyEntry 13 } removed activeCallAsyErrorProtocol OBJECT-TYPE SYNTAX INTEGER { none(1), buffer(2), mnpclass2(3), mnpclass3(4), mnpclass4(5), v42(6), v42selrej(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Error correction protocol used by the modem." ::= { actCallAsyEntry 14 } activeCallAsyCompressionProtocol OBJECT-TYPE SYNTAX INTEGER { none(1), v42bis-decode(2), v42bis-encode(3), v42bis-encode-decode(4), mnpclass5(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Data compression protocol used by the modem. The compression protocol used by the modem is dependent on the error correction protocol used at the lower layer." ::= { actCallAsyEntry 15 } activeCallAsyTxPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LAPM packets sent by the modem. This does not include retransmitted packets." ::= { actCallAsyEntry 16 } activeCallAsyTxPacketError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LAPM packets retransmitted by the modem." ::= { actCallAsyEntry 17 } activeCallAsyRxPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of good LAPM packets received by the modem." ::= { actCallAsyEntry 19 } activeCallAsyRxPacketError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of bad LAPM packets (with CRC errors) received by the modem." ::= { actCallAsyEntry 20 } -- actCallAsyEntry 22 deleted activeCallAsyRetrainReqSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of retrains requested by the modem for this call." ::= { actCallAsyEntry 22 } activeCallAsyRetrainReqReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of retrain requests received by the modem from the remote modem for this call." ::= { actCallAsyEntry 23 } activeCallAsyRRNReqReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of rate renegotiation request (RRN) initiated by the remote modem." ::= { actCallAsyEntry 24 } activeCallAsyRRNReqSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of rate renegotiation request (RRN) initiated by this modem." ::= { actCallAsyEntry 25 } activeCallAsyRoundTripDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The round trip delay, in milliseconds, for this call. This object alongwith the object, activeCallAsyFarEndEchoFreq, gives the echo characteristics of the call." ::= { actCallAsyEntry 26 } activeCallAsyFarEndEchoFreq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Far end echo frequency offset, in Hertz. This object alongwith the object, activeCallAsyRoundTripDelay, gives the echo characteristics of the call." ::= { actCallAsyEntry 27 } activeCallAsyFarEndEchoLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Far end echo level, in decibels. The number represents the negative decibels." ::= { actCallAsyEntry 28 } activeCallAsyChanFreqOffset OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Channel frequency offset, in Hertz." ::= { actCallAsyEntry 29 } activeCallAsyOscFreqOffset OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Oscillator frequency offset, in PPM. Not always valid." ::= { actCallAsyEntry 30 } activeCallAsySNR OBJECT-TYPE SYNTAX INTEGER (0..80) ACCESS read-only STATUS mandatory DESCRIPTION "Signal to noise ratio in decibels. Low is bad, high is good. Zero means not valid: no current connection, or connection is not V.34 (other protocols don't calculate this)." ::= { actCallAsyEntry 31 } activeCallAsyx2Status OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "x2 phase bit map --------------------- | 4 | 3 | 2 | 1 | 0 | bits --------------------- |DM |P4 |P3 |P2 |P1 | --------------------- P1 = 1 Detected In Phase 1 P2 = 1 Detected In Phase 2 P3 = 1 X2 In Phase 3 P4 = 1 X2 In Phase 4 DM = 1 X2 In Data Mode" ::= { actCallAsyEntry 32 } activeCallAsyx2RbsStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "x2 raw bit signalling, bit map ------------------------- | 5 | 4 | 3 | 2 | 1 | 0 | bits ------------------------- |S5 |S4 |S3 |S2 |S1 |S0 | ------------------------- S0 = 1 RBS in symbol 0 S1 = 1 RBS in symbol 1 S2 = 1 RBS in symbol 2 S3 = 1 RBS in symbol 3 S4 = 1 RBS in symbol 4 S5 = 1 RBS in symbol 5 " ::= { actCallAsyEntry 33 } activeCallAsyx2DigitalPadStatus OBJECT-TYPE SYNTAX INTEGER { none(1), a3db(2), a6db(3) } ACCESS read-only STATUS mandatory DESCRIPTION "x2 attenuation" ::= { actCallAsyEntry 34 } -- activeCallAsyx2Shaping { actCallAsyEntry 35 } deleted activeCallAsyk56Status OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "k56 phase bit map --------------------- | 4 | 3 | 2 | 1 | 0 | bits --------------------- |DM |P4 |P3 |P2 |P1 | --------------------- P1 = 1 Detected In Phase 1 P2 = 1 Detected In Phase 2 P3 = 1 K56 In Phase 3 P4 = 1 K56 In Phase 4 DM = 1 K56 In Data Mode" ::= { actCallAsyEntry 36 } activeCallAsyk56RbsStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "k56 raw bit signalling, bit map ------------------------- | 5 | 4 | 3 | 2 | 1 | 0 | bits ------------------------- |S5 |S4 |S3 |S2 |S1 |S0 | ------------------------- S0 = 1 RBS in symbol 0 S1 = 1 RBS in symbol 1 S2 = 1 RBS in symbol 2 S3 = 1 RBS in symbol 3 S4 = 1 RBS in symbol 4 S5 = 1 RBS in symbol 5 " ::= { actCallAsyEntry 37 } activeCallAsyk56DigitalPadStatus OBJECT-TYPE SYNTAX INTEGER { none(1), a3db(2), a6db(3) } ACCESS read-only STATUS mandatory DESCRIPTION "k56 attenuation" ::= { actCallAsyEntry 38 } -- activeCallAsyk56Shaping { actCallAsyEntry 39 } deleted activeCallAsyk56Version OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " k56 version number" ::= { actCallAsyEntry 40 } activeCallAsyWANUnitNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The physical WAN module unit number in the RAC that uses WAN modules. The range is 1 to anxt1Total. Use anxt1WanModuleTable to retrieve the unit's ifIndex number.(For R14.1 and later releases, WAN1=1001 and WAN2 = 1002 always" ::= { actCallAsyEntry 41 } activeCallAsyChannel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number from 1 to anxt1TotChan that identifies which DS0 channel handled the call." ::= { actCallAsyEntry 42 } activeCallAsyCurrModulation OBJECT-TYPE SYNTAX INTEGER { none(1), v34(2), v32-v32bis(3), v22bis(4), x2(5), k56(6), itu-tPCM(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Beginning negotiated modulation mode." ::= { actCallAsyEntry 43 } activeCallAsyCurrPumpState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "End pump status." ::= { actCallAsyEntry 44 } activeCallAsyx2SpeedReduction OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Speed reduction due to spectral shaping: 0 no speed reduction 1 speed reduction of 1.333 kBps 2 speed reduction of 2.666 kBps 3 speed reduction of 4.0 kBps 4 speed reduction of 5.333 kBps 5 speed reduction of 6.666 kBps 6 speed reduction of 8.0 kBps" ::= { actCallAsyEntry 45 } activeCallAsyk56SpeedReduction OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Speed reduction due to robbed bits: 0 no speed reduction 1 speed reduction of 2.0 kBps 2 speed reduction of 4.0 kBps 3 speed reduction of 6.0 kBps 4 speed reduction of 8.0 kBps" ::= { actCallAsyEntry 46 } activeCallAsyV90Status OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "V90 status (this is a bitmap): 1 = currently in V90 mode 2 = V90 detected in phase 1 4 = V90 detected in phase 2 8 = V90 through phase 3 16 = V90 through phase 4 32 = V90 in data mode 64 = V90 data mode at least once " ::= { actCallAsyEntry 47 } activeCallAsyV90ConstellationIndex0 OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Constellation index for symbol 0." ::= { actCallAsyEntry 48 } activeCallAsyV90ConstellationIndex1 OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Constellation index for symbol 1" ::= { actCallAsyEntry 49 } activeCallAsyV90ConstellationIndex2 OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Constellation index for symbol 2" ::= { actCallAsyEntry 50 } activeCallAsyV90ConstellationIndex3 OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Constellation index for symbol 3" ::= { actCallAsyEntry 51 } activeCallAsyV90ConstellationIndex4 OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Constellation index for symbol 4" ::= { actCallAsyEntry 52 } activeCallAsyV90ConstellationIndex5 OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Constellation index for symbol 5" ::= { actCallAsyEntry 53 } activeCallAsyV90PADStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Digital attenuation in dB." ::= { actCallAsyEntry 54 } activeCallAsyV90ShapingBits OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "Number of CSS redundancy bits." ::= { actCallAsyEntry 55 } activeCallAsyV90LookAhead OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "Number of look ahead CSS frames." ::= { actCallAsyEntry 56 } activeCallAsyV90ConstellationPower OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "V90 constellation power in -dBm." ::= { actCallAsyEntry 57 } activeCallAsyV90HalfDuplexRRNRx OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of received half-duplex RRNs." ::= { actCallAsyEntry 58 } -- Returns active TA call statistics actCallTaTable OBJECT-TYPE SYNTAX SEQUENCE OF ActCallTaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of TA call statistics indexed by the TA device number." ::= { activecall 4 } actCallTaEntry OBJECT-TYPE SYNTAX ActCallTaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row in the TA call statistics table." INDEX { activeCallDeviceNumber } ::= { actCallTaTable 1 } ActCallTaEntry ::= SEQUENCE { activeCallTaSpeed INTEGER } activeCallTaSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The receive connect speed at the time the call was established." ::= { actCallTaEntry 1 } -- Returns active Sync call statistics actCallSyncTable OBJECT-TYPE SYNTAX SEQUENCE OF ActCallSyncEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of Sync call statistics indexed by the Sync device number." ::= { activecall 5 } actCallSyncEntry OBJECT-TYPE SYNTAX ActCallSyncEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row in the Sync call statistics table." INDEX { activeCallDeviceNumber } ::= { actCallSyncTable 1 } ActCallSyncEntry ::= SEQUENCE { activeCallSyncSpeed INTEGER } activeCallSyncSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The receive connect speed at the time the call was established." ::= { actCallSyncEntry 1 } -- This table is will contain data for the active devices' -- specific MP sessions. actCallMpTable OBJECT-TYPE SYNTAX SEQUENCE OF ActCallMpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of call history MP information/statistics." ::= { activecall 6 } actCallMpEntry OBJECT-TYPE SYNTAX ActCallMpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row in the call history MP table." INDEX { activeCallDeviceNumber } ::= { actCallMpTable 1 } ActCallMpEntry ::= SEQUENCE { activeCallMpBundleIdx INTEGER } activeCallMpBundleIdx OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of this MP bundle." ::= { actCallMpEntry 1 } -- The call history table. The objects in callHistTable are kept for -- all types of calls (modem, ta, sync) on the WAN interface. Depending -- on the device type the call was assigned to, the device specific -- statistics can be retrieved from the appropriate MIB table. For example, -- if the call was assigned to a modem (a async. type of device), then -- callHistAsyTable MIB table will give the call's modem specific statistics. -- MIB objects for ta and sync calls are not yet defined. The maximum -- size of the table is defined by the value of callHistMaxCalls. callHistMaxCalls OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of calls for which history is kept by the RAC. Default is 0. Note: Assigning an arbitrarily large value to this object could affect the performance of the box due to memory being used to maintain this table. Each call record uses about 500 bytes of RAC memory." ::= { callHist 1 } callHistStartIdx OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The beginning (lowest) value of callHistIndex currently in the call history table. This is the oldest call currently in the table. Note this value could change at any time since the table could have new calls added to it and old calls dropping off the table." ::= { callHist 2 } callHistEndIdx OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The end (highest) value of callHistIndex in the call history table. Note this value could change at any time since the table will have new calls added whenever a call terminates." ::= { callHist 3 } callHistTable OBJECT-TYPE SYNTAX SEQUENCE OF CallHistEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of call history information. You should view this table as either a circular buffer or a sliding window whose size is specified by callHistMaxCalls. When the table is full and a call terminates, the information for the oldest call in the table is discarded and the new call information is added. The callHistStartIdx value is changed whenever a call's information is discarded. The callHistEndIdx value is changed whenever a call's information is added to the table." ::= { callHist 4 } callHistEntry OBJECT-TYPE SYNTAX CallHistEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row in the call history table." INDEX { callHistIndex } ::= { callHistTable 1 } CallHistEntry ::= SEQUENCE { callHistIndex INTEGER, callHistUsername DisplayString, callHistCallingNumber DisplayString, callHistCalledNumber DisplayString, callHistSPBName DisplayString, callHistWANUnitNumber INTEGER, callHistChannel INTEGER, callHistDeviceType INTEGER, callHistDeviceNumber INTEGER, callHistSubAddress DisplayString, callHistBearer INTEGER, callHistSetupTime INTEGER, callHistDuration INTEGER, callHistlocalin DisplayString, callHistremotein DisplayString, callHistlocalat DisplayString, callHistremoteat DisplayString, callHistlocalipx DisplayString, callHistremoteipx DisplayString, callHistConnectionType INTEGER, callHistOctetsRx Counter, callHistOctetsTx Counter, callHistOrigin INTEGER, callHistDisconnectReason INTEGER, callHistConfiguredType INTEGER, callHistCompositeDisconnect INTEGER, callHistOwningBundle INTEGER } callHistIndex OBJECT-TYPE SYNTAX INTEGER (1..'7fffffff'h) -- 2147483647 ACCESS read-only STATUS mandatory DESCRIPTION "A unique identifier assigned to a call in the call history table. When a call terminates, its call record is moved from the active call table to the call history table, and the next higher history index number is assigned to it." ::= { callHistEntry 1 } callHistUsername OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "Name of the user associated with this call. Can be a null string. This object obsoletes anxmStatsUsername." ::= { callHistEntry 2 } callHistCallingNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The number from which this call was made. Can be a null string." ::= { callHistEntry 3 } callHistCalledNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The number to which this call was made. Can be a null string. This object obsoletes anxmStatsNumber." ::= { callHistEntry 4 } callHistSPBName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "Session Parameter Block name used when answering the call. Can be a null string." ::= { callHistEntry 5 } callHistWANUnitNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The physical WAN module unit number in the RAC that uses WAN modules. The range is 1 to anxt1Total. Use anxt1WanModuleTable to retrieve the unit's ifIndex number." ::= { callHistEntry 6 } callHistChannel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number from 1 to anxt1TotChan that identifies which DS0 channel handled the call." ::= { callHistEntry 7 } callHistDeviceType OBJECT-TYPE SYNTAX INTEGER { asy(1), syn(9), ta(10), mp(12) } ACCESS read-only STATUS mandatory DESCRIPTION "An enumerated integer indicating the port type. asy(1) - the call was assigned internally to an asynchronous device (async port). syn(9) - the call was handled internally by a synchronous device (sync port). ta(10) - the call was handled internally by a ta device (ta port). mp(12) - pseudo-session, Multi-link PPP bundle head." ::= { callHistEntry 8 } callHistDeviceNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The 1-based device (port) number the call was assigned to. This object in conjunction with the object, callHistDeviceType, should be used to cross-reference the information displayed by the CLI command 'who'. This object obsoletes anxmStatsPort." ::= { callHistEntry 9 } callHistSubAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The subaddress this call was connected to. Can be a null string." ::= { callHistEntry 10 } callHistBearer OBJECT-TYPE SYNTAX INTEGER { missing(1), voice(2), data(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object defines the bearer capability of the incoming call. " ::= { callHistEntry 11 } callHistSetupTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The time that the call started. This is RAC system time, which is the same as Unix system time: seconds since 0:00 January 1, 1970 UTC (GMT). This object obsoletes anxmStatsTime." ::= { callHistEntry 12 } callHistDuration OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Duration of the call, in seconds. This object obsoletes anxmStatsDuration." ::= { callHistEntry 13 } callHistlocalin OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "The Internet (IP) address assigned to the RAC end of a point-to-point link established during this call, in dotted-decimal notation." ::= { callHistEntry 14 } callHistremotein OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "The Internet (IP) address assigned to the far end of a point-to-point link established during this call, in dotted-decimal notation." ::= { callHistEntry 15 } callHistlocalat OBJECT-TYPE SYNTAX DisplayString (SIZE (0..13)) ACCESS read-only STATUS mandatory DESCRIPTION "The local AppleTalk address assigned to this call." ::= { callHistEntry 16 } callHistremoteat OBJECT-TYPE SYNTAX DisplayString (SIZE (0..13)) ACCESS read-only STATUS mandatory DESCRIPTION "The remote AppleTalk address assigned to this call." ::= { callHistEntry 17 } callHistlocalipx OBJECT-TYPE SYNTAX DisplayString (SIZE (21)) ACCESS read-only STATUS mandatory DESCRIPTION "The local IPX address assigned to this call." ::= { callHistEntry 18 } callHistremoteipx OBJECT-TYPE SYNTAX DisplayString (SIZE (21)) ACCESS read-only STATUS mandatory DESCRIPTION "The remote IPX address assigned to this call." ::= { callHistEntry 19 } callHistConnectionType OBJECT-TYPE SYNTAX INTEGER { none(1), cli(2), server(3), rdp(4), slip(5), dedicated(6), ldp(7), ppp(8), mp(9), arap(10), ftp(11), ndp(12), ipx(13), dynamic-dial(14), vpn(15), ppp-sublet-from-cli(16) } ACCESS read-only STATUS mandatory DESCRIPTION "The name of the client routine running on the port at the time of this call." ::= { callHistEntry 20 } callHistOctetsRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of octets received during this call." ::= { callHistEntry 21 } callHistOctetsTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of octets transmitted during this call." ::= { callHistEntry 22 } callHistOrigin OBJECT-TYPE SYNTAX INTEGER { incoming(1), outgoing(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The call origin. incoming(1) - the RAC answered an incoming call. outgoing(2) - the call was made by the RAC. This object deprecates callSetupCallType object." ::= { callHistEntry 23 } callHistDisconnectReason OBJECT-TYPE SYNTAX INTEGER { unknown(1), telDisc(2), dialFailed(3), wanmgrErr(4), reset(5), admErrornext(6), admModDown(7), pppTerm(8), inactivity(9), hangupCmd(10), lastJob(11), maxLogon(12), slaveNormal(13), slaveError(14), noCarrier(15), cliInactivity(16), portReset(17), cliAuthFail(18), slaveAuthFail(19), pppPapFail(20), pppChapFail(21), modemReset(22), deadModemReset(23), pppLcpFail(24), pppLastNcpFailIpcp(25), pppLastNcpFailIpxcp(26), pppLastNcpFailAtcp(27), pppLastNcpFailCcp(28), pppLastNcpFailMp(29), pppLastNcpToIpcp(30), pppLastNcpToIpxcp(31), pppLastNcpToAtcp(32), pppLastNcpToCcp(33), pppLastNcpToMp(34), pppInitFailed(35), pppUnknownCode(36), pppDialback(37), pppAddrInuse(38), pppNoDevice(39), pppModSigHangup(40), pppSigHangup(41), pppSigTerm(42), pppSigKill(43), pppSigTime(44), pppNoMem(45), pppConnAbort(46), pppVpnLcpFail(47), pppVpnAuthFail(48), pppMpBadPortCfg(49), pppInvOpDevType(50), mmpBunDiscFail(51), dvsRegFail(52), dvsHaDereg(53), dvsTnlNoRenew(54), dvsTnlExpire(55), l2tpCallFail(56), l2tpCallDiscNotify(57), dialTimedout(58), camponError(59), preempted(60), pppBunLinkErr(61), clidialbackrequest(62) } ACCESS read-only STATUS mandatory DESCRIPTION "Call disconnect reasons: unknown telDisc got telephone disconnect (hangup) dialFailed wanmgrErr internal error, shouldn't happen reset WAN/channel reset admErrornext general internal mechanism to end call admModDown DSR or DCD went down pppTerm PPP protocol disconnect inactivity inactivity timer ran out hangupCmd CLI command 'hangup' lastJob CLI last-job maxLogon max logon timer ran out slaveNormal normal slave termination slaveError abnormal slave termination noCarrier modem failed to establish a connection cliInactivity cli_inactivity timer ran out portReset port was reset cliAuthFail CLI authorization failed slaveAuthFail slave port authorization failed pppPapFail PPP PAP failed pppChapFail PPP CHAP failed modemReset internal modem was reset deadModemReset internal modem was reset because it was not responding" ::= { callHistEntry 24 } callHistConfiguredType OBJECT-TYPE SYNTAX INTEGER { cli(1), slave(2), adaptive(3), unused(4), slip(5), dedicated(6), ppp(7), arap(8), printer(9), auto-detect(10), auto-adapt(11), ndp(12), ipx(13), call(14), connect(15), rlogin(16), telnet(17), tn3270(18), any(19) } ACCESS read-only STATUS mandatory DESCRIPTION "The type (mode) of the port at the time of the connection. cli - allows an incoming session access to the CLI. The CLI provides access to the network and connections to other hosts via the telnet, connect, rlogin and tn3270 commands. slip - allows a port to perform as a network interface using SLIP. IP packets are encapsulated by SLIP. ppp - allows a port to perform as a network interface using PPP. Packets of several protocols are encapsulated by PPP. arap - allows a port to perform as a network interface using ARAP. slave - allows a port to accept TCP connections over the network. connect - allows a port to communicate with a LAT host via the connect command. rlogin - allows a port to communicate via the rlogin command. telnet - allows a port to communicate via the telnet command. tn3270 - allows a port to communicate via the tn3270 command." ::= { callHistEntry 25 } callHistCompositeDisconnect OBJECT-TYPE SYNTAX INTEGER { -- Following values from callHistDisconnectReason. unknown(1), telDisc(2), dialFailed(3), wanmgrErr(4), reset(5), admErrornext(6), admModDown(7), pppTerm(8), inactivity(9), hangupCmd(10), lastJob(11), maxLogon(12), slaveNormal(13), slaveError(14), noCarrier(15), cliInactivity(16), portReset(17), cliAuthFail(18), slaveAuthFail(19), pppPapFail(20), pppChapFail(21), modemReset(22), deadModemReset(23), pppLcpFail(24), pppLastNcpFailIpcp(25), pppLastNcpFailIpxcp(26), pppLastNcpFailAtcp(27), pppLastNcpFailCcp(28), pppLastNcpFailMp(29), pppLastNcpToIpcp(30), pppLastNcpToIpxcp(31), pppLastNcpToAtcp(32), pppLastNcpToCcp(33), pppLastNcpToMp(34), pppInitFailed(35), pppUnknownCode(36), pppDialback(37), pppAddrInuse(38), pppNoDevice(39), pppModSigHangup(40), pppSigHangup(41), pppSigTerm(42), pppSigKill(43), pppSigTime(44), pppNoMem(45), pppConnAbort(46), pppVpnLcpFail(47), pppVpnAuthFail(48), pppMpBadPortCfg(49), pppInvOpDevType(50), mmpBunDiscFail(51), dvsRegFail(52), dvsHaDereg(53), dvsTnlNoRenew(54), dvsTnlExpire(55), l2tpCallFail(56), l2tpCallDiscNotify(57), clidialbackrequest(58), -- Following from callHistAsyMdmDisconnectReason, -- + 100,000 to avoid collisions. -- Modem unknown reason does not occur here. mdm-local-host-disconnect(100002), mdm-cd-timer-expired(100003), mdm-protocol-disconnect(100004), mdm-proto-discon-remote-mdm(100005), mdm-cleardown(100006), mdm-long-space-disconnect(100007), mdm-carrier-lost(100008), mdm-retrain-timeout(100009) } ACCESS read-only STATUS mandatory DESCRIPTION "Composite call disconnect reason. Either system or modem disconnect reason (callHistDisconnectReason or callHistAsyMdmDisconnectReason). Modem reasons have 100,000 added to avoid collisions (since SNMP does not allow enum values to be negative). The modem version of 'unknown' does not occur here." ::= { callHistEntry 26 } callHistOwningBundle OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of the MP bundle that owns this PPP link." ::= { callHistEntry 27 } -- This table is valid only for calls on digital modems. Thus -- if the callHistDeviceType is asy(1) then this table will have -- a corresponding entry for the call history statistics/information. callHistAsyTable OBJECT-TYPE SYNTAX SEQUENCE OF CallHistAsyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of call history asynchronous information/statistics." ::= { callHist 5 } callHistAsyEntry OBJECT-TYPE SYNTAX CallHistAsyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row in the call history async. table." INDEX { callHistIndex } ::= { callHistAsyTable 1 } CallHistAsyEntry ::= SEQUENCE { callHistAsyBeginRxSpeed INTEGER, callHistAsyEndRxSpeed INTEGER, callHistAsyBeginTxSpeed INTEGER, callHistAsyEndTxSpeed INTEGER, callHistAsyTxBaudRate INTEGER, callHistAsyRxBaudRate INTEGER, callHistAsyBeginSignalQ INTEGER, callHistAsyEndSignalQ INTEGER, callHistAsyBeginRxLineLevel INTEGER, callHistAsyEndRxLineLevel INTEGER, callHistAsyModulationMode INTEGER, callHistAsyErrorProtocol INTEGER, callHistAsyCompressionProtocol INTEGER, callHistAsyTxPackets Counter, callHistAsyTxPacketError Counter, callHistAsyRxPackets Counter, callHistAsyRxPacketError Counter, callHistAsyRetrainReqSent Counter, callHistAsyRetrainReqReceived Counter, callHistAsyRRNReqReceived Counter, callHistAsyRRNReqSent Counter, callHistAsyRoundTripDelay INTEGER, callHistAsyFarEndEchoFreq INTEGER, callHistAsyFarEndEchoLevel INTEGER, callHistAsyChanFreqOffset INTEGER, callHistAsyOscFreqOffset INTEGER, callHistAsySNR INTEGER, callHistAsyMdmDisconnectReason INTEGER, callHistAsyx2Status INTEGER, callHistAsyx2RbsStatus INTEGER, callHistAsyx2DigitalPadStatus INTEGER, callHistAsyx2Shaping INTEGER, callHistAsyk56Status INTEGER, callHistAsyk56RbsStatus INTEGER, callHistAsyk56DigitalPadStatus INTEGER, callHistAsyk56Shaping INTEGER, callHistAsyk56Version INTEGER, callHistAsySignalQ INTEGER, callHistAsyBeginModulation INTEGER, callHistAsyEndModulation INTEGER, callHistAsyEndPumpState INTEGER, callHistAsyx2SpeedReduction INTEGER, callHistAsyk56SpeedReduction INTEGER, callHistAsyV90Status INTEGER, callHistAsyV90ConstellationIndex0 INTEGER, callHistAsyV90ConstellationIndex1 INTEGER, callHistAsyV90ConstellationIndex2 INTEGER, callHistAsyV90ConstellationIndex3 INTEGER, callHistAsyV90ConstellationIndex4 INTEGER, callHistAsyV90ConstellationIndex5 INTEGER, callHistAsyV90PADStatus INTEGER, callHistAsyV90ShapingBits INTEGER, callHistAsyV90LookAhead INTEGER, callHistAsyV90ConstellationPower INTEGER, callHistAsyV90HalfDuplexRRNRx INTEGER } callHistAsyBeginRxSpeed OBJECT-TYPE SYNTAX INTEGER { bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54) } ACCESS read-only STATUS mandatory DESCRIPTION "The receive connect speed when the modem connection was established." ::= { callHistAsyEntry 1 } callHistAsyEndRxSpeed OBJECT-TYPE SYNTAX INTEGER { bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54) } ACCESS read-only STATUS mandatory DESCRIPTION "The ending receive connect speed of the call." ::= { callHistAsyEntry 2 } callHistAsyBeginTxSpeed OBJECT-TYPE SYNTAX INTEGER { bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54) } ACCESS read-only STATUS mandatory DESCRIPTION "The transmit connect speed when the modem connection was established." ::= { callHistAsyEntry 3 } callHistAsyEndTxSpeed OBJECT-TYPE SYNTAX INTEGER { bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54) } ACCESS read-only STATUS mandatory DESCRIPTION "The ending transmit connect speed of the call." ::= { callHistAsyEntry 4 } callHistAsyTxBaudRate OBJECT-TYPE SYNTAX INTEGER { r2400(1), r2743(2), r2800(3), r3000(4), r3200(5), r3429(6), r8000(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The transmit rate at which symbols that carry data are generated. Symbol rate limits and options apply to V.34. Default is r2400(1)." ::= { callHistAsyEntry 5 } callHistAsyRxBaudRate OBJECT-TYPE SYNTAX INTEGER { r2400(1), r2743(2), r2800(3), r3000(4), r3200(5), r3429(6), r8000(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The received rate at which symbols that carry data are received. Symbol rate limits and options apply to V.34. Default is r2400(1)." ::= { callHistAsyEntry 6 } callHistAsyBeginSignalQ OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS deprecated DESCRIPTION "Line signal quality at the beginning of the call. This is a unitless number derived from several line characteristics. Range is 0-255; 0 is good. 30 or less is reasonable." ::= { callHistAsyEntry 7 } callHistAsyEndSignalQ OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS deprecated DESCRIPTION "Line signal quality at the end of the call. This is a unitless number derived from several line characteristics. Range is 0-255; 0 is good. 30 or less is reasonable." ::= { callHistAsyEntry 8 } callHistAsyBeginRxLineLevel OBJECT-TYPE SYNTAX INTEGER (0..45) ACCESS read-only STATUS mandatory DESCRIPTION "The receive signal level at the beginning of the call, in dBm (ratio of receive level to a reference value). The number returned by this MIB object is positive, but it represents a negative number (ie, this object returns the negative of the actual dBm). Expected values are roughly -12 to -30. Less than -11 is bad; that signal is too strong, and causes problems for the modem." ::= { callHistAsyEntry 9 } callHistAsyEndRxLineLevel OBJECT-TYPE SYNTAX INTEGER (0..45) ACCESS read-only STATUS mandatory DESCRIPTION "The receive signal level at the end of the call, in dBm (ratio of receive level to a reference value). The number returned by this MIB object is positive, but it represents a negative number (ie, this object returns the negative of the actual dBm). Expected values are roughly -12 to -30. Less than -11 is bad; that signal is too strong, and causes problems for the modem." ::= { callHistAsyEntry 10 } callHistAsyModulationMode OBJECT-TYPE SYNTAX INTEGER { none(1), v34(2), v32-v32bis(3), v22bis(4), x2(5), k56(6), itu-tPCM(7) } ACCESS read-only STATUS deprecated DESCRIPTION "Negotiated modulation mode." ::= { callHistAsyEntry 11 } callHistAsyErrorProtocol OBJECT-TYPE SYNTAX INTEGER { none(1), buffer(2), mnpclass2(3), mnpclass3(4), mnpclass4(5), v42(6), v42selrej(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Error correction protocol used by the modem." ::= { callHistAsyEntry 12 } callHistAsyCompressionProtocol OBJECT-TYPE SYNTAX INTEGER { none(1), v42bis-decode(2), v42bis-encode(3), v42bis-encode-decode(4), mnpclass5(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Data compression protocol used by the modem. The compression protocol used by the modem is dependent on the error correction protocol used at the lower layer." ::= { callHistAsyEntry 13 } callHistAsyTxPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LAPM packets sent by the modem. This does not include retransmitted packets." ::= { callHistAsyEntry 14 } callHistAsyTxPacketError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LAPM packets retransmitted by the modem." ::= { callHistAsyEntry 15 } -- { callHistAsyEntry 16 } is reserved callHistAsyRxPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of good LAPM packets received by the modem." ::= { callHistAsyEntry 17 } callHistAsyRxPacketError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of bad LAPM packets (with CRC errors) received by the modem." ::= { callHistAsyEntry 18 } -- { callHistAsyEntry 19 } is reserved callHistAsyRetrainReqSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of retrains requested by the modem for this call." ::= { callHistAsyEntry 20 } callHistAsyRetrainReqReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of retrain requests received by the modem from the remote modem for this call." ::= { callHistAsyEntry 21 } callHistAsyRRNReqReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of rate renegotiation request (RRN) initiated by the remote modem." ::= { callHistAsyEntry 22 } callHistAsyRRNReqSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of rate renegotiation request (RRN) initiated by this modem." ::= { callHistAsyEntry 23 } callHistAsyRoundTripDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The round trip delay, in milliseconds, for this call. This object, along with the object callHistAsyFarEndEchoFreq, gives the echo characteristics of the call." ::= { callHistAsyEntry 24 } callHistAsyFarEndEchoFreq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Far end echo frequency offset, in Hertz. This object, along with the object callHistAsyRoundTripDelay, gives the echo characteristics of the call." ::= { callHistAsyEntry 25 } callHistAsyFarEndEchoLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Far end echo level, in decibels. The number represents the negative decibels." ::= { callHistAsyEntry 26 } callHistAsyChanFreqOffset OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Channel frequency offset, in Hertz." ::= { callHistAsyEntry 27 } callHistAsyOscFreqOffset OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Oscillator frequency offset, in PPM. Not always valid." ::= { callHistAsyEntry 28 } callHistAsySNR OBJECT-TYPE SYNTAX INTEGER (0..80) ACCESS read-only STATUS mandatory DESCRIPTION "Signal to noise ratio in decibels. Low is bad, high is good. Zero means not valid: no current connection, or connection is not V.34 (other protocols don't calculate this)." ::= { callHistAsyEntry 29 } callHistAsyMdmDisconnectReason OBJECT-TYPE SYNTAX INTEGER { unknown(1), local-host-disconnect(2), cd-timer-expired(3), protocol-disconnect(4), proto-discon-remote-mdm(5), cleardown(6), long-space-disconnect(7), carrier-lost(8), retrain-timeout(9) } ACCESS read-only STATUS mandatory DESCRIPTION "Modem's reason for disconnecting the call. Modem's disconnect reason could be different from the system's reason for disconnecting the call. carrier-lost(8) - modem detected the loss of carrier. The time (delay) from loss of carrier until the modem disconnects is determined by MIB object mdmCfgLineCarrierDisconnect. retrain-timeout(9) - modem failed to retrain." ::= { callHistAsyEntry 30 } callHistAsyx2Status OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "x2 phase bit map --------------------- | 4 | 3 | 2 | 1 | 0 | bits --------------------- |DM |P4 |P3 |P2 |P1 | --------------------- P1 = 1 Detected In Phase 1 P2 = 1 Detected In Phase 2 P3 = 1 X2 In Phase 3 P4 = 1 X2 In Phase 4 DM = 1 X2 In Data Mode" ::= { callHistAsyEntry 31 } callHistAsyx2RbsStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "x2 raw bit signalling, bit map ------------------------- | 5 | 4 | 3 | 2 | 1 | 0 | bits ------------------------- |S5 |S4 |S3 |S2 |S1 |S0 | ------------------------- S0 = 1 RBS in symbol 0 S1 = 1 RBS in symbol 1 S2 = 1 RBS in symbol 2 S3 = 1 RBS in symbol 3 S4 = 1 RBS in symbol 4 S5 = 1 RBS in symbol 5" ::= { callHistAsyEntry 32 } callHistAsyx2DigitalPadStatus OBJECT-TYPE SYNTAX INTEGER { none(1), a3db(2), a6db(3) } ACCESS read-only STATUS mandatory DESCRIPTION "x2 attenuation" ::= { callHistAsyEntry 33 } callHistAsyx2Shaping OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Number of bits used for spectral shaping in one data frame (frame 0 - 6)" ::= { callHistAsyEntry 34 } callHistAsyk56Status OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "k56 phase bit map --------------------- | 4 | 3 | 2 | 1 | 0 | bits --------------------- |DM |P4 |P3 |P2 |P1 | --------------------- P1 = 1 Detected In Phase 1 P2 = 1 Detected In Phase 2 P3 = 1 K56 In Phase 3 P4 = 1 K56 In Phase 4 DM = 1 K56 In Data Mode" ::= { callHistAsyEntry 35 } callHistAsyk56RbsStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "k56 raw bit signalling, bit map ------------------------- | 5 | 4 | 3 | 2 | 1 | 0 | bits ------------------------- |S5 |S4 |S3 |S2 |S1 |S0 | ------------------------- S0 = 1 RBS in symbol 0 S1 = 1 RBS in symbol 1 S2 = 1 RBS in symbol 2 S3 = 1 RBS in symbol 3 S4 = 1 RBS in symbol 4 S5 = 1 RBS in symbol 5" ::= { callHistAsyEntry 36 } callHistAsyk56DigitalPadStatus OBJECT-TYPE SYNTAX INTEGER { none(1), a3db(2), a6db(3) } ACCESS read-only STATUS mandatory DESCRIPTION "k56 attenuation" ::= { callHistAsyEntry 37 } callHistAsyk56Shaping OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Number of bits used for spectral shaping in one data frame (frame 0 - 6)" ::= { callHistAsyEntry 38 } callHistAsyk56Version OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "k56 version number" ::= { callHistAsyEntry 39 } callHistAsySignalQ OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Line signal quality at the end of the call. This is a unitless number derived from several line characteristics. Range is 0-255; 0 is good. 30 or less is reasonable." ::= { callHistAsyEntry 40 } callHistAsyBeginModulation OBJECT-TYPE SYNTAX INTEGER { none(1), v34(2), v32-v32bis(3), v22bis(4), x2(5), k56(6), itu-tPCM(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Beginning negotiated modulation mode." ::= { callHistAsyEntry 41 } callHistAsyEndModulation OBJECT-TYPE SYNTAX INTEGER { none(1), v34(2), v32-v32bis(3), v22bis(4), x2(5), k56(6), itu-tPCM(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Ending negotiated modulation mode." ::= { callHistAsyEntry 42 } callHistAsyEndPumpState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "End pump status." ::= { callHistAsyEntry 43 } callHistAsyx2SpeedReduction OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Speed reduction due to spectral shaping: 0 no speed reduction 1 speed reduction of 1.333 kBps 2 speed reduction of 2.666 kBps 3 speed reduction of 4.0 kBps 4 speed reduction of 5.333 kBps 5 speed reduction of 6.666 kBps 6 speed reduction of 8.0 kBps" ::= { callHistAsyEntry 44 } callHistAsyk56SpeedReduction OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Speed reduction due to robbed bits: 0 no speed reduction 1 speed reduction of 2.0 kBps 2 speed reduction of 4.0 kBps 3 speed reduction of 6.0 kBps 4 speed reduction of 8.0 kBps" ::= { callHistAsyEntry 45 } callHistAsyV90Status OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "V90 status (this is a bitmap): 1 = currently in V90 mode 2 = V90 detected in phase 1 4 = V90 detected in phase 2 8 = V90 through phase 3 16 = V90 through phase 4 32 = V90 in data mode 64 = V90 data mode at least once " ::= { callHistAsyEntry 46 } callHistAsyV90ConstellationIndex0 OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Constellation index for symbol 0." ::= { callHistAsyEntry 47 } callHistAsyV90ConstellationIndex1 OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Constellation index for symbol 1" ::= { callHistAsyEntry 48 } callHistAsyV90ConstellationIndex2 OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Constellation index for symbol 2" ::= { callHistAsyEntry 49 } callHistAsyV90ConstellationIndex3 OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Constellation index for symbol 3" ::= { callHistAsyEntry 50 } callHistAsyV90ConstellationIndex4 OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Constellation index for symbol 4" ::= { callHistAsyEntry 51 } callHistAsyV90ConstellationIndex5 OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Constellation index for symbol 5" ::= { callHistAsyEntry 52 } callHistAsyV90PADStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Digital attenuation in dB." ::= { callHistAsyEntry 53 } callHistAsyV90ShapingBits OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "Number of CSS redundancy bits." ::= { callHistAsyEntry 54 } callHistAsyV90LookAhead OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "Number of look ahead CSS frames." ::= { callHistAsyEntry 55 } callHistAsyV90ConstellationPower OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "V90 constellation power in -dBm." ::= { callHistAsyEntry 56 } callHistAsyV90HalfDuplexRRNRx OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of received half-duplex RRNs." ::= { callHistAsyEntry 57 } -- This table is will contain data for the historical device -- specific TA sessions. callHistTaTable OBJECT-TYPE SYNTAX SEQUENCE OF CallHistTaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of call history TA information/statistics." ::= { callHist 6 } callHistTaEntry OBJECT-TYPE SYNTAX CallHistTaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row in the call history TA table." INDEX { callHistIndex } ::= { callHistTaTable 1 } CallHistTaEntry ::= SEQUENCE { callHistTaSpeed INTEGER } callHistTaSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of this TA bundle." ::= { callHistTaEntry 1 } -- This table is will contain data for the historical device -- specific Sync sessions. callHistSyncTable OBJECT-TYPE SYNTAX SEQUENCE OF CallHistSyncEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of call history Sync information/statistics." ::= { callHist 7 } callHistSyncEntry OBJECT-TYPE SYNTAX CallHistSyncEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row in the call history Sync table." INDEX { callHistIndex } ::= { callHistSyncTable 1 } CallHistSyncEntry ::= SEQUENCE { callHistSyncSpeed INTEGER } callHistSyncSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of this Sync bundle." ::= { callHistSyncEntry 1 } -- This table is will contain data for the historical device -- specific MP sessions. callHistMpTable OBJECT-TYPE SYNTAX SEQUENCE OF CallHistMpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of call history MP information/statistics." ::= { callHist 8 } callHistMpEntry OBJECT-TYPE SYNTAX CallHistMpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row in the call history MP table." INDEX { callHistIndex } ::= { callHistMpTable 1 } CallHistMpEntry ::= SEQUENCE { callHistMpBundleIdx INTEGER } callHistMpBundleIdx OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of this MP bundle." ::= { callHistMpEntry 1 } -- modem call statistics MIB objects. The modem statistics MIB table represents -- modem statistics for an active call. If the modem state is not busy, -- then statistics are unreliable and user should not use them except -- for the object, mdmStatTotalCalls. For the call history statistics, -- you should consult call history MIB table. -- Note: these are read only objects. -- Objects mdmCallStat* (all but state and total calls) come from the -- active call record for that modem. If the modem state is not busy -- that is, if there is no call in progress on that modem, and -- therefore no active call record; these objects return special -- values: zero for integer types, the largest positive integer -- ('7fffffff'h) for enumerated types. Note that zero is ambiguous -- for some objects. mdmCallStatTable OBJECT-TYPE SYNTAX SEQUENCE OF MdmCallStatEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A table of modem call statistics." ::= { mdmCallStatsObjects 1 } mdmCallStatEntry OBJECT-TYPE SYNTAX MdmCallStatEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A row in the modem call statistics table." INDEX { mdmNumber } ::= { mdmCallStatTable 1 } MdmCallStatEntry ::= SEQUENCE { mdmCallStatBeginRxSpeed INTEGER, mdmCallStatCurrRxSpeed INTEGER, mdmCallStatBeginTxSpeed INTEGER, mdmCallStatCurrTxSpeed INTEGER, mdmCallStatTxBaudRate INTEGER, mdmCallStatRxBaudRate INTEGER, mdmCallStatBeginSignalQ INTEGER, mdmCallStatCurrSignalQ INTEGER, mdmCallStatBeginRxLineLevel INTEGER, mdmCallStatCurrRxLineLevel INTEGER, mdmCallStatModulationMode INTEGER, mdmCallStatErrorProtocol INTEGER, mdmCallStatCompressionProtocol INTEGER, mdmCallStatTxPackets Counter, mdmCallStatTxPacketError Counter, mdmCallStatRxPackets Counter, mdmCallStatRxPacketError Counter, mdmCallStatRetrainReqSent Counter, mdmCallStatRetrainReqReceived Counter, mdmCallStatRRNReqReceived Counter, mdmCallStatRRNReqSent Counter, mdmCallStatRoundTripDelay INTEGER, mdmCallStatFarEndEchoFreq INTEGER, mdmCallStatFarEndEchoLevel INTEGER, mdmCallStatChanFreqOffset INTEGER, mdmCallStatOscFreqOffset INTEGER, mdmCallStatSNR INTEGER, mdmCallStatx2Status INTEGER, mdmCallStatx2RbsStatus INTEGER, mdmCallStatx2DigitalPadStatus INTEGER, mdmCallStatx2Shaping INTEGER, mdmCallStatk56Status INTEGER, mdmCallStatk56RbsStatus INTEGER, mdmCallStatk56DigitalPadStatus INTEGER, mdmCallStatk56Shaping INTEGER, mdmCallStatk56Version INTEGER, mdmCallStatWANUnitNumber INTEGER, mdmCallStatChannel INTEGER } -- reserved { mdmCallStatEntry 1 } -- reserved { mdmCallStatEntry 2 } mdmCallStatBeginRxSpeed OBJECT-TYPE SYNTAX INTEGER { bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54) -- nocall('7fffffff'h) } ACCESS read-only STATUS deprecated DESCRIPTION "The receive connect speed at the time the call was established. Note: The agent will return zero if the modem is not in a busy state." ::= { mdmCallStatEntry 3 } mdmCallStatCurrRxSpeed OBJECT-TYPE SYNTAX INTEGER { bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54) -- nocall('7fffffff'h) } ACCESS read-only STATUS deprecated DESCRIPTION "The current receive connect speed of the call." ::= { mdmCallStatEntry 4 } mdmCallStatBeginTxSpeed OBJECT-TYPE SYNTAX INTEGER { bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54) -- nocall('7fffffff'h) } ACCESS read-only STATUS deprecated DESCRIPTION "The transmit connect speed at the time the call was established. Note: The agent will return zero if the modem is not in a busy state." ::= { mdmCallStatEntry 5 } mdmCallStatCurrTxSpeed OBJECT-TYPE SYNTAX INTEGER { bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54) -- nocall('7fffffff'h) } ACCESS read-only STATUS deprecated DESCRIPTION "The current transmit connect speed of the call." ::= { mdmCallStatEntry 6 } mdmCallStatTxBaudRate OBJECT-TYPE SYNTAX INTEGER { r2400(1), r2743(2), r2800(3), r3000(4), r3200(5), r3429(6), r8000(7) -- nocall('7fffffff'h) } ACCESS read-only STATUS deprecated DESCRIPTION "The rate at which symbols that carry data are generated. Symbol rate limits and options apply to the modem v.34. Default is r2400(1)." ::= { mdmCallStatEntry 7 } mdmCallStatRxBaudRate OBJECT-TYPE SYNTAX INTEGER { r2400(1), r2743(2), r2800(3), r3000(4), r3200(5), r3429(6), r8000(7) -- nocall('7fffffff'h) } ACCESS read-only STATUS deprecated DESCRIPTION "The rate at which symbols that carry data are received. Symbol rate limits and options apply to the modem v.34. Default is r2400(1)." ::= { mdmCallStatEntry 8 } mdmCallStatBeginSignalQ OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS deprecated DESCRIPTION "Line signal quality at the beginning of the call. This is a unitless number derived from several line characteristics. Range is 0-255; 0 is good. 30 or less is reasonable." ::= { mdmCallStatEntry 9 } mdmCallStatCurrSignalQ OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS deprecated DESCRIPTION "Current line signal quality. This is a unitless number derived from several line characteristics. Range is 0-255; 0 is good. 30 or less is reasonable." ::= { mdmCallStatEntry 10 } mdmCallStatBeginRxLineLevel OBJECT-TYPE SYNTAX INTEGER (0..45) ACCESS read-only STATUS deprecated DESCRIPTION "The receive signal level at the beginning of the call, in dBm (ratio of receive level to a reference value). The number returned by this MIB object is positive, but it represents a negative number (ie, this object returns the negative of the actual dBm). Expected values are roughly -12 to -30. Less than -11 is bad; that signal is too strong, and causes problems for the modem." ::= { mdmCallStatEntry 11 } mdmCallStatCurrRxLineLevel OBJECT-TYPE SYNTAX INTEGER (0..45) ACCESS read-only STATUS deprecated DESCRIPTION "The current receive signal level of the call, in dBm (ratio of receive level to a reference value). The number returned by this MIB object is positive, but it represents a negative number (ie, this object returns the negative of the actual dBm). Expected values are roughly -12 to -30. Less than -11 is bad; that signal is too strong, and causes problems for the modem." ::= { mdmCallStatEntry 12 } mdmCallStatModulationMode OBJECT-TYPE SYNTAX INTEGER { none(1), v34(2), v32-v32bis(3), v22bis(4), x2(5), k56(6), itu-tPCM(7) -- nocall('7fffffff'h) } ACCESS read-only STATUS deprecated DESCRIPTION "Negotiated modulation mode." ::= { mdmCallStatEntry 13 } mdmCallStatErrorProtocol OBJECT-TYPE SYNTAX INTEGER { none(1), buffer(2), mnpclass2(3), mnpclass3(4), mnpclass4(5), v42(6), v42selrej(7) -- nocall('7fffffff'h) } ACCESS read-only STATUS deprecated DESCRIPTION "Error correction protocol used by the modem." ::= { mdmCallStatEntry 14 } mdmCallStatCompressionProtocol OBJECT-TYPE SYNTAX INTEGER { none(1), v42bis-decode(2), v42bis-encode(3), v42bis-encode-decode(4), mnpclass5(5) -- nocall('7fffffff'h) } ACCESS read-only STATUS deprecated DESCRIPTION "Data compression protocol used by the modem. The compression protocol used by the modem is dependent on the error correction protocol used at the lower layer." ::= { mdmCallStatEntry 15 } mdmCallStatTxPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The number of LAPM packets sent by the modem. This does not include retransmitted packets." ::= { mdmCallStatEntry 16 } mdmCallStatTxPacketError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The number of LAPM packets retransmitted by the modem." ::= { mdmCallStatEntry 17 } -- ::= { mdmCallStatEntry 18 } is reserved mdmCallStatRxPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The number of good LAPM packets received by the modem." ::= { mdmCallStatEntry 19 } mdmCallStatRxPacketError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The number of bad LAPM packets (with CRC errors) received by the modem." ::= { mdmCallStatEntry 20 } -- ::= { mdmCallStatEntry 21 } is reserved mdmCallStatRetrainReqSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The number of retrains requested by the modem for this call." ::= { mdmCallStatEntry 22 } mdmCallStatRetrainReqReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The number of retrain requests received by the modem from the remote modem for this call." ::= { mdmCallStatEntry 23 } mdmCallStatRRNReqReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "Number of rate renegotiation request (RRN) initiated by the remote modem." ::= { mdmCallStatEntry 24 } mdmCallStatRRNReqSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "Number of rate renegotiation request (RRN) initiated by this modem." ::= { mdmCallStatEntry 25 } mdmCallStatRoundTripDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The round trip delay, in milliseconds, for this call. This object alongwith the object, mdmCallStatFarEndEchoFreq, gives the echo characteristics of the call." ::= { mdmCallStatEntry 26 } mdmCallStatFarEndEchoFreq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Far end echo frequency offset, in Hertz. This object alongwith the object, mdmCallStatRoundTripDelay, gives the echo characteristics of the call." ::= { mdmCallStatEntry 27 } mdmCallStatFarEndEchoLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Far end echo level, in decibels. The number represents the negative decibels." ::= { mdmCallStatEntry 28 } mdmCallStatChanFreqOffset OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Channel frequency offset, in Hertz." ::= { mdmCallStatEntry 29 } mdmCallStatOscFreqOffset OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Oscillator frequency offset, in PPM. Not always valid." ::= { mdmCallStatEntry 30 } mdmCallStatSNR OBJECT-TYPE SYNTAX INTEGER (0..80) ACCESS read-only STATUS deprecated DESCRIPTION "Signal to noise ratio in decibels. Low is bad, high is good. Zero means not valid: no current connection, or connection is not V.34 (other protocols don't calculate this)." ::= { mdmCallStatEntry 31 } mdmCallStatx2Status OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "x2 phase bit map --------------------- | 4 | 3 | 2 | 1 | 0 | bits --------------------- |DM |P4 |P3 |P2 |P1 | --------------------- P1 = 1 Detected In Phase 1 P2 = 1 Detected In Phase 2 P3 = 1 X2 In Phase 3 P4 = 1 X2 In Phase 4 DM = 1 X2 In Data Mode" ::= { mdmCallStatEntry 32 } mdmCallStatx2RbsStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "x2 raw bit signalling, bit map ------------------------- | 5 | 4 | 3 | 2 | 1 | 0 | bits ------------------------- |S5 |S4 |S3 |S2 |S1 |S0 | ------------------------- S0 = 1 RBS in symbol 0 S1 = 1 RBS in symbol 1 S2 = 1 RBS in symbol 2 S3 = 1 RBS in symbol 3 S4 = 1 RBS in symbol 4 S5 = 1 RBS in symbol 5 " ::= { mdmCallStatEntry 33 } mdmCallStatx2DigitalPadStatus OBJECT-TYPE SYNTAX INTEGER { none(1), a3db(2), a6db(3) } ACCESS read-only STATUS deprecated DESCRIPTION "x2 attenuation" ::= { mdmCallStatEntry 34 } mdmCallStatx2Shaping OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "x2 - Number of bits used for spectral shaping in one data frame (frame 0 - 6)" ::= { mdmCallStatEntry 35 } mdmCallStatk56Status OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "k56 phase bit map --------------------- | 4 | 3 | 2 | 1 | 0 | bits --------------------- |DM |P4 |P3 |P2 |P1 | --------------------- P1 = 1 Detected In Phase 1 P2 = 1 Detected In Phase 2 P3 = 1 K56 In Phase 3 P4 = 1 K56 In Phase 4 DM = 1 K56 In Data Mode" ::= { mdmCallStatEntry 36 } mdmCallStatk56RbsStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "k56 raw bit signalling, bit map ------------------------- | 5 | 4 | 3 | 2 | 1 | 0 | bits ------------------------- |S5 |S4 |S3 |S2 |S1 |S0 | ------------------------- S0 = 1 RBS in symbol 0 S1 = 1 RBS in symbol 1 S2 = 1 RBS in symbol 2 S3 = 1 RBS in symbol 3 S4 = 1 RBS in symbol 4 S5 = 1 RBS in symbol 5 " ::= { mdmCallStatEntry 37 } mdmCallStatk56DigitalPadStatus OBJECT-TYPE SYNTAX INTEGER { none(1), a3db(2), a6db(3) } ACCESS read-only STATUS deprecated DESCRIPTION "k56 attenuation" ::= { mdmCallStatEntry 38 } mdmCallStatk56Shaping OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "k56 - Number of bits used for spectral shaping in one data frame (frame 0 - 6)" ::= { mdmCallStatEntry 39 } mdmCallStatk56Version OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION " k56 version number" ::= { mdmCallStatEntry 40 } mdmCallStatWANUnitNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The physical WAN module unit number in the RAC that uses WAN modules. The range is 1 to anxt1Total. Use anxt1WanModuleTable to retrieve the unit's ifIndex number.(For R14.1 and later releases, WAN1=1001 and WAN2 = 1002 always" ::= { mdmCallStatEntry 41 } mdmCallStatChannel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "A number from 1 to anxt1TotChan that identifies which DS0 channel handled the call." ::= { mdmCallStatEntry 42 } portActionTable OBJECT-TYPE SYNTAX SEQUENCE OF PortActionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of port actions" ::= { portaction 1 } portActionEntry OBJECT-TYPE SYNTAX PortActionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row in the portActionTable." INDEX { portActionDeviceType, portActionDeviceNumber } ::= { portActionTable 1 } PortActionEntry ::= SEQUENCE { portActionDeviceType INTEGER, portActionDeviceNumber INTEGER, portActionResetPort INTEGER } portActionDeviceType OBJECT-TYPE SYNTAX INTEGER { asy(1), syn(9), ta(10), mp(12), vpn(13), gen-sync-port(14) } ACCESS read-only STATUS mandatory DESCRIPTION "An enumerated integer indicating the device type. asy(1) - the call is assigned internally to an asynchronous device (async port). syn(9) - the call is handled internally by a synchronous device (sync port). ta(10) - the call is handled internally by a ta device (ta port). mp(12) - pseudo-session, Multi-link PPP bundle head. vpn(13) - Virtual Private Network. gen-sync(14) - General Sync port." ::= { portActionEntry 1 } portActionDeviceNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The one-based device (port) number the call is assigned to." ::= { portActionEntry 2 } portActionResetPort OBJECT-TYPE SYNTAX INTEGER { ready(1), execute(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to execute will reset the specified port terminating all sessions on the port. Reading this object will allways return ready(1). Setting this object is equivalent to the reset port command in cli/admin." ::= { portActionEntry 3 } END