-- Changes to iscsi-mib.txt -- Changed SMIv2 syntax to SMIv1 syntax. -- Remove SMIv2 specific MODULE-IDENTITY description. -- Changed "MAX-ACCESS" to "ACCESS" -- Changed STATUS type "current" to "mandatory" -- Commented conformance related sections. -- Change "Unsigned32" to "INTEGER(0..2147483647)" -- Change "Counter32" to "Counter" -- Comment out UNITS. smiv1 loader does not like this CLAUSE -- Comment out AUGMENTS. smiv1 loader complaines. ISCSI-MIB DEFINITIONS ::= BEGIN IMPORTS mib-2 FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 experimental FROM RFC1155-SMI TRAP-TYPE FROM RFC-1215 Counter, Gauge, TimeTicks FROM RFC1155-SMI; InetAddress ::= OCTET STRING InetAddressType ::= INTEGER { ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16) } SnmpAdminString ::= OCTET STRING (SIZE (0..255)) -- Textual Conventions RowPointer ::= OBJECT IDENTIFIER RowStatus ::= INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } TruthValue ::= INTEGER { true(1), false(2) } iscsiModule OBJECT IDENTIFIER ::= { experimental 9999 } iscsiObjects OBJECT IDENTIFIER ::= { iscsiModule 1 } IscsiTransportProtocols ::= INTEGER (0..255) -- IscsiTransportProtocols ::= TEXTUAL-CONVENTION -- DISPLAY-HINT "d" -- STATUS mandatory -- DESCRIPTION -- "This data type is used to define the transport -- protocols that will carry iSCSI PDUs." -- REFERENCE -- "RFC791, RFC1700 -- -- The presently known, officially delegated numbers -- can be found at: -- http://www.iana.org/assignments/protocol-numbers" -- SYNTAX INTEGER (0..255) IscsiDigestMethod ::= INTEGER { none(1), other(2), noDigest(3), crc32c(4) } -- IscsiDigestMethod ::= TEXTUAL-CONVENTION -- STATUS mandatory -- DESCRIPTION -- "This data type represents the methods possible -- for digest negotiation. -- none - a placeholder for a secondary digest method -- that means only the primary method can be -- used. -- other - a digest method other than those defined below; -- noDigest - does not support digests (will operate without -- a digest (NOTE: implementations MUST support -- digests to be compliant with the iSCSI RFC); -- CRC32c - require a CRC32C digest." -- SYNTAX INTEGER -- { none(1), other(2), noDigest(3), crc32c(4) } IscsiName ::= OCTET STRING (SIZE(16..223)) --IscsiName ::= TEXTUAL-CONVENTION -- DISPLAY-HINT "223a" -- STATUS mandatory -- DESCRIPTION -- "This data type is a local refinement of the SnmpAdminString -- used to define an iSCSI Name." -- REFERENCE -- "iSCSI Protocol Specification, Section 3.2.6, iSCSI Names." -- SYNTAX OCTET STRING (SIZE(16..223)) iscsiDescriptors OBJECT IDENTIFIER ::= { iscsiObjects 1 } iscsiHeaderIntegrityTypes OBJECT IDENTIFIER ::= { iscsiDescriptors 1 } iscsiHdrIntegrityNone OBJECT-TYPE SYNTAX OCTET STRING ACCESS not-accessible STATUS mandatory DESCRIPTION "The authoritative identifier when no integrity scheme (for either the header or data) is being used." ::= { iscsiHeaderIntegrityTypes 1 } iscsiHdrIntegrityCrc32c OBJECT-TYPE SYNTAX OCTET STRING ACCESS not-accessible STATUS mandatory DESCRIPTION "The authoritative identifier when no integrity scheme (for either the header or data) is CRC-32." ::= { iscsiHeaderIntegrityTypes 2 } iscsiDataIntegrityTypes OBJECT IDENTIFIER ::= { iscsiDescriptors 2 } iscsiDataIntegrityNone OBJECT-TYPE SYNTAX OCTET STRING ACCESS not-accessible STATUS mandatory DESCRIPTION "The authoritative identifier when no integrity scheme (for either the header or data) is being used." ::= { iscsiDataIntegrityTypes 1 } iscsiDataIntegrityCrc32c OBJECT-TYPE SYNTAX OCTET STRING ACCESS not-accessible STATUS mandatory DESCRIPTION "The authoritative identifier when the integrity scheme (for either the header or data) is CRC-32c." ::= { iscsiDataIntegrityTypes 2 } ---------------------------------------------------------------------- iscsiInstance OBJECT IDENTIFIER ::= { iscsiObjects 2 } -- Instance Attributes Table iscsiInstanceAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiInstanceAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of iSCSI instances present on the system." ::= { iscsiInstance 1 } iscsiInstanceAttributesEntry OBJECT-TYPE SYNTAX IscsiInstanceAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular iSCSI instance." INDEX { iscsiInstIndex } ::= { iscsiInstanceAttributesTable 1 } IscsiInstanceAttributesEntry ::= SEQUENCE { iscsiInstIndex INTEGER, iscsiInstDescr SnmpAdminString, iscsiInstVersionMin INTEGER, iscsiInstVersionMax INTEGER, iscsiInstVendorID SnmpAdminString, iscsiInstVendorVersion SnmpAdminString, iscsiInstPortalNumber INTEGER, iscsiInstNodeNumber INTEGER, iscsiInstSessionNumber INTEGER, iscsiInstSsnFailures Counter, iscsiInstLastSsnFailureType OCTET STRING, iscsiInstLastSsnRmtNodeName IscsiName } iscsiInstIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular ISCSI instance." ::= { iscsiInstanceAttributesEntry 1 } iscsiInstDescr OBJECT-TYPE SYNTAX SnmpAdminString ACCESS read-only STATUS mandatory DESCRIPTION "An octet string, determined by the implementation to describe the iSCSI instance. When only a single instance is present, this object may be set to the zero-length string; with multiple iSCSI instances, it may be used in an implementation-dependent manner to describe the purpose of the respective instance." ::= { iscsiInstanceAttributesEntry 2 } iscsiInstVersionMin OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Minimum version number of the iSCSI specification supported by this instance." ::= { iscsiInstanceAttributesEntry 3 } iscsiInstVersionMax OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Maximum version number of the iSCSI specification supported by this instance." ::= { iscsiInstanceAttributesEntry 4 } iscsiInstVendorID OBJECT-TYPE SYNTAX SnmpAdminString ACCESS read-only STATUS mandatory DESCRIPTION "An octet string describing the manufacturer of the implementation of this instance." ::= { iscsiInstanceAttributesEntry 5 } iscsiInstVendorVersion OBJECT-TYPE SYNTAX SnmpAdminString ACCESS read-only STATUS mandatory DESCRIPTION "An octet string set by the manufacturer describing the verison of the implementation of this instance. The format of this string is determined solely by the manufacturer, and is for informational purposes only. It is unrelated to the iSCSI specification version numbers." ::= { iscsiInstanceAttributesEntry 6 } iscsiInstPortalNumber OBJECT-TYPE SYNTAX INTEGER --UNITS "transport endpoints" ACCESS read-only STATUS mandatory DESCRIPTION "The number of rows in the iscsiPortalAttributesTable which are currently associated with this iSCSI instance." ::= { iscsiInstanceAttributesEntry 7 } iscsiInstNodeNumber OBJECT-TYPE SYNTAX INTEGER --UNITS "Internet Network Addresses" ACCESS read-only STATUS mandatory DESCRIPTION "The number of rows in the iscsiNodeAttributesTable which are currently associated with this iSCSI instance." ::= { iscsiInstanceAttributesEntry 8 } iscsiInstSessionNumber OBJECT-TYPE SYNTAX INTEGER --UNITS "sessions" ACCESS read-only STATUS mandatory DESCRIPTION "The number of rows in the iscsiSessionAttributesTable which are currently associated with this iSCSI instance." ::= { iscsiInstanceAttributesEntry 9 } iscsiInstSsnFailures OBJECT-TYPE SYNTAX Counter --UNITS "sessions" ACCESS read-only STATUS mandatory DESCRIPTION "This object counts the number of times a session belonging to this instance has been failed." ::= { iscsiInstanceAttributesEntry 10 } iscsiInstLastSsnFailureType OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The counter object in the iscsiInstSsnErrorStatsTable that was incremented when the last session failure occurred. If the reason for failure is not found in the iscsiInstSsnErrorStatsTable, the value { 0.0 } is used instead." ::= { iscsiInstanceAttributesEntry 11 } iscsiInstLastSsnRmtNodeName OBJECT-TYPE SYNTAX IscsiName ACCESS read-only STATUS mandatory DESCRIPTION "An octet string describing the name of the remote node from the failed session." ::= { iscsiInstanceAttributesEntry 12 } -- Instance Session Failure Stats Table iscsiInstanceSsnErrorStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiInstanceSsnErrorStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of error types that will cause a session failure." ::= { iscsiInstance 2 } iscsiInstanceSsnErrorStatsEntry OBJECT-TYPE SYNTAX IscsiInstanceSsnErrorStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular iSCSI instance." INDEX { iscsiInstIndex } --AUGMENTS { iscsiInstanceAttributesEntry } ::= { iscsiInstanceSsnErrorStatsTable 1 } IscsiInstanceSsnErrorStatsEntry ::= SEQUENCE { iscsiInstSsnDigestErrors Counter, iscsiInstSsnCxnTimeoutErrors Counter, iscsiInstSsnFormatErrors Counter } iscsiInstSsnDigestErrors OBJECT-TYPE SYNTAX Counter --UNITS "sessions" ACCESS read-only STATUS mandatory DESCRIPTION "The count of sessions which were failed due to receipt of a PDU containing header or data digest errors." ::= { iscsiInstanceSsnErrorStatsEntry 1 } iscsiInstSsnCxnTimeoutErrors OBJECT-TYPE SYNTAX Counter --UNITS "sessions" ACCESS read-only STATUS mandatory DESCRIPTION "The count of sessions which were failed due to a sequence exceeding a time limit." ::= { iscsiInstanceSsnErrorStatsEntry 2 } iscsiInstSsnFormatErrors OBJECT-TYPE SYNTAX Counter --UNITS "sessions" ACCESS read-only STATUS mandatory DESCRIPTION "The count of sessions which were failed due to receipt of a PDU which contained a format error." ::= { iscsiInstanceSsnErrorStatsEntry 3 } ---------------------------------------------------------------------- iscsiPortal OBJECT IDENTIFIER ::= { iscsiObjects 3 } -- Portal Attributes Table iscsiPortalAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiPortalAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of transport endpoints (using TCP or another transport protocol) used by this iSCSI instance. An iSCSI instance may use a portal to listen for incoming connections to its targets, to initiate connections to other targets, or both." ::= { iscsiPortal 1 } iscsiPortalAttributesEntry OBJECT-TYPE SYNTAX IscsiPortalAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular portal instance." INDEX { iscsiInstIndex, iscsiPortalIndex } ::= { iscsiPortalAttributesTable 1 } IscsiPortalAttributesEntry ::= SEQUENCE { iscsiPortalIndex INTEGER, iscsiPortalRowStatus RowStatus, iscsiPortalRoles OCTET STRING, iscsiPortalAddrType InetAddressType, iscsiPortalAddr InetAddress, iscsiPortalProtocol IscsiTransportProtocols, iscsiPortalMaxRecvDataSegLength INTEGER, iscsiPortalPrimaryHdrDigest IscsiDigestMethod, iscsiPortalPrimaryDataDigest IscsiDigestMethod, iscsiPortalSecondaryHdrDigest IscsiDigestMethod, iscsiPortalSecondaryDataDigest IscsiDigestMethod, iscsiPortalRecvMarker TruthValue } iscsiPortalIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular transport endpoint within this iSCSI instance." ::= { iscsiPortalAttributesEntry 1 } iscsiPortalRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of the row." ::= { iscsiPortalAttributesEntry 2 } iscsiPortalRoles OBJECT-TYPE SYNTAX OCTET STRING -- { targetTypePortal(0), initiatorTypePortal(1) } ACCESS read-write STATUS mandatory DESCRIPTION "A portal can operate in one or both of two roles: as a target portal and/or an initiator portal. If the portal will operate in both roles, both bits must be set. When a new iscsiPortalAttributesEntry is to be created, the agent should use this object as a hint for the creation of a new iscsiTgtPortalAttributesEntry and/or iscsiIntrPortalAttributesEntry." ::= { iscsiPortalAttributesEntry 3 } iscsiPortalAddrType OBJECT-TYPE SYNTAX InetAddressType ACCESS read-write STATUS mandatory DESCRIPTION "The type of Internet Network Address in the iscsiPortalAddr." DEFVAL { ipv4 } ::= { iscsiPortalAttributesEntry 4 } iscsiPortalAddr OBJECT-TYPE SYNTAX InetAddress ACCESS read-write STATUS mandatory DESCRIPTION "The portal's Internet Network Address." ::= { iscsiPortalAttributesEntry 5 } iscsiPortalProtocol OBJECT-TYPE SYNTAX IscsiTransportProtocols ACCESS read-write STATUS mandatory DESCRIPTION "The portal's transport protocol." DEFVAL { 6 } ::= { iscsiPortalAttributesEntry 6 } iscsiPortalMaxRecvDataSegLength OBJECT-TYPE SYNTAX INTEGER (512..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum PDU length this portal can receive. This may be constrained by hardware characteristics and individual implementations may chose not to allow this object to be changed." DEFVAL { 8192 } ::= { iscsiPortalAttributesEntry 7 } iscsiPortalPrimaryHdrDigest OBJECT-TYPE SYNTAX IscsiDigestMethod ACCESS read-write STATUS mandatory DESCRIPTION "The preferred header digest for this portal." DEFVAL { crc32c } ::= { iscsiPortalAttributesEntry 8 } iscsiPortalPrimaryDataDigest OBJECT-TYPE SYNTAX IscsiDigestMethod ACCESS read-write STATUS mandatory DESCRIPTION "The preferred data digest method for this portal." DEFVAL { crc32c } ::= { iscsiPortalAttributesEntry 9 } iscsiPortalSecondaryHdrDigest OBJECT-TYPE SYNTAX IscsiDigestMethod ACCESS read-write STATUS mandatory DESCRIPTION "An alternate header digest preference for this portal." DEFVAL { noDigest } ::= { iscsiPortalAttributesEntry 10 } iscsiPortalSecondaryDataDigest OBJECT-TYPE SYNTAX IscsiDigestMethod ACCESS read-write STATUS mandatory DESCRIPTION "An alternate data digest preference for this portal." DEFVAL { noDigest } ::= { iscsiPortalAttributesEntry 11 } iscsiPortalRecvMarker OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether or not this portal will request markers in it's incoming data stream." DEFVAL { false } ::= { iscsiPortalAttributesEntry 12 } ---------------------------------------------------------------------- iscsiTargetPortal OBJECT IDENTIFIER ::= { iscsiObjects 4 } -- Target Portal Attributes Table iscsiTgtPortalAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiTgtPortalAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of transport endpoints (using TCP or another transport protocol) on which this iSCSI instance listens for incoming connections to its targets." ::= { iscsiTargetPortal 1 } iscsiTgtPortalAttributesEntry OBJECT-TYPE SYNTAX IscsiTgtPortalAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular portal instance that is used to listen for incoming connections to local targets. This row is populated for each iscsiPortalAttributesEntry row that may be used as a target portal." INDEX { iscsiInstIndex, iscsiPortalIndex } ::= { iscsiTgtPortalAttributesTable 1 } IscsiTgtPortalAttributesEntry ::= SEQUENCE { iscsiTgtPortalPort INTEGER, iscsiTgtPortalTag INTEGER } iscsiTgtPortalPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The portal's transport protocol port number on which the portal listens for incoming iSCSI connections when the portal is used as a target portal." ::= { iscsiTgtPortalAttributesEntry 1 } iscsiTgtPortalTag OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The portal's aggregation tag when portal is used as a target portal. Multiple-connection sessions may be aggregated over portals sharing an identical aggregation tag." ::= { iscsiTgtPortalAttributesEntry 2 } ---------------------------------------------------------------------- iscsiInitiatorPortal OBJECT IDENTIFIER ::= { iscsiObjects 5 } -- Initiator Portal Attributes Table iscsiIntrPortalAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiIntrPortalAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Internet Network Addresses (using TCP or another transport protocol) from which this iSCSI instance may initiate connections to other targets." ::= { iscsiInitiatorPortal 1 } iscsiIntrPortalAttributesEntry OBJECT-TYPE SYNTAX IscsiIntrPortalAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing managment information applicable to a particular portal instance that is used to initiate connections to iSCSI targets. This row is populated for each iscsiPortalAttributesEntry row that may be used as an initiator portal." INDEX { iscsiInstIndex, iscsiPortalIndex } ::= { iscsiIntrPortalAttributesTable 1 } IscsiIntrPortalAttributesEntry ::= SEQUENCE { iscsiIntrPortalTag INTEGER } iscsiIntrPortalTag OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The portal's aggregation tag when the portal is used as an initiator portal. Multiple-connection sessions may be aggregated over portals sharing an identical aggregation tag." ::= { iscsiIntrPortalAttributesEntry 1 } ---------------------------------------------------------------------- iscsiNode OBJECT IDENTIFIER ::= { iscsiObjects 6 } -- Node Attributes Table iscsiNodeAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiNodeAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of iSCSI nodes belonging to each iSCSI instance present on the local system. An iSCSI node can act as an initiator, a target, or both." ::= { iscsiNode 1 } iscsiNodeAttributesEntry OBJECT-TYPE SYNTAX IscsiNodeAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing managment information applicable to a particular iSCSI node." INDEX { iscsiInstIndex, iscsiNodeIndex } ::= { iscsiNodeAttributesTable 1 } IscsiNodeAttributesEntry ::= SEQUENCE { iscsiNodeIndex INTEGER, iscsiNodeName IscsiName, iscsiNodeAlias SnmpAdminString, iscsiNodeRoles OCTET STRING, iscsiNodeTransportType RowPointer, iscsiNodeInitialR2T TruthValue, iscsiNodeImmediateData TruthValue, iscsiNodeMaxOutstandingR2T INTEGER, iscsiNodeFirstBurstLength INTEGER, iscsiNodeMaxBurstLength INTEGER, iscsiNodeMaxConnections INTEGER, iscsiNodeDataSequenceInOrder TruthValue, iscsiNodeDataPDUInOrder TruthValue, iscsiNodeDefaultTime2Wait INTEGER, iscsiNodeDefaultTime2Retain INTEGER, iscsiNodeErrorRecoveryLevel INTEGER } iscsiNodeIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system." ::= { iscsiNodeAttributesEntry 1 } iscsiNodeName OBJECT-TYPE SYNTAX IscsiName ACCESS read-only STATUS mandatory DESCRIPTION "A character string that is a globally unique identifier for this iSCSI node. The node name is independent of the location of the node, and can be resolved into a set of addresses through various discovery services. If this node is used as a discovery-only node, and supports only discovery sessions, this object contains a zero-length string." ::= { iscsiNodeAttributesEntry 2 } iscsiNodeAlias OBJECT-TYPE SYNTAX SnmpAdminString ACCESS read-only STATUS mandatory DESCRIPTION "A character string that is a human-readable name or description of the iSCSI node. If configured, this alias may be communicated to the initiator or target node at the remote end of the connection during a Login Request or Response message. This string is not used as an identifier, but can be displayed by the system's user interface in a list of initiators and/or targets to which it is connected. If no alias is configured, this object is a zero-length string." ::= { iscsiNodeAttributesEntry 3 } iscsiNodeRoles OBJECT-TYPE SYNTAX OCTET STRING -- { targetTypeNode(0), initiatorTypeNode(1) } ACCESS read-only STATUS mandatory DESCRIPTION "A node can operate in one or both of two roles: a target role and/or an initiator role. If the node will operate in both roles, both bits must be set. When a new iscsiNodeAttributesEntry is to be created, the agent should use this object as a hint for the creation of a new iscsiTargetAttributesEntry and/or iscsiInitiatorAttributesEntry." ::= { iscsiNodeAttributesEntry 4 } iscsiNodeTransportType OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "A pointer to the corresponding scsiTrnspt object in the SCSI MIB (which in turn points to this iSCSI node) allowing management stations to locate the SCSI-level Device that is represented by this iscsiNode." -- REFERENCE -- "SCSI-MIB" ::= { iscsiNodeAttributesEntry 5 } iscsiNodeInitialR2T OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the InitialR2T preference for this node: True = YES, False = will try to negotiate NO, will accept YES " DEFVAL { true } ::= { iscsiNodeAttributesEntry 6 } iscsiNodeImmediateData OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates ImmediateData preference for this node True = YES (but will accept NO), False = NO " DEFVAL { true } ::= { iscsiNodeAttributesEntry 7 } iscsiNodeMaxOutstandingR2T OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of outstanding R2Ts allowed per task." DEFVAL { 1 } ::= { iscsiNodeAttributesEntry 8 } iscsiNodeFirstBurstLength OBJECT-TYPE SYNTAX INTEGER (512..16777215) -- --UNITS "bytes" ACCESS read-write STATUS mandatory DESCRIPTION "The maximum length (bytes) supported for unsolicited data to/from this node." DEFVAL { 65536 } ::= { iscsiNodeAttributesEntry 9 } iscsiNodeMaxBurstLength OBJECT-TYPE SYNTAX INTEGER (512..16777215) -- --UNITS "bytes" ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of bytes which can be sent within a single sequence of Data-In or Data-Out PDUs." DEFVAL { 262144 } ::= { iscsiNodeAttributesEntry 10 } iscsiNodeMaxConnections OBJECT-TYPE SYNTAX INTEGER (1..65535) --UNITS "connections" ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of connections allowed in each session to and/or from this node." DEFVAL { 1 } ::= { iscsiNodeAttributesEntry 11 } iscsiNodeDataSequenceInOrder OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "The DataSequenceInOrder preference of this node. False (=No) indicates that iSCSI data PDU sequences may be transferred in any order. True (=Yes) indicates that data PDU sequences must be tranferred using continuously increasing offsets, except during error recovery." DEFVAL { true } ::= { iscsiNodeAttributesEntry 12 } iscsiNodeDataPDUInOrder OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "The DataPDUInOrder preference of this node. False (=No) indicates that iSCSI data PDUs within sequences may be in any order. True (=Yes) indicates that data PDUs within sequences must be at continuously increasing addresses, with no gaps or overlay between PDUs." DEFVAL { true } ::= { iscsiNodeAttributesEntry 13 } iscsiNodeDefaultTime2Wait OBJECT-TYPE SYNTAX INTEGER (0..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The DefaultTime2Wait preference of this node. This is the minimum time, in seconds, to wait before attempting an explicit/implicit logout or active task reassignment after an unexpected connection termination or a connection reset." DEFVAL { 2 } ::= { iscsiNodeAttributesEntry 14 } iscsiNodeDefaultTime2Retain OBJECT-TYPE SYNTAX INTEGER (0..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The DefaultTime2Retain preference of this node. This is the maximum time, in seconds after an initial wait (Time2Wait), before which an active task reassignment is still possible after an unexpected connection termination or a connection reset." DEFVAL { 20 } ::= { iscsiNodeAttributesEntry 15 } iscsiNodeErrorRecoveryLevel OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The ErrorRecoveryLevel preference of this node. Currently, only 0-2 are valid. This object is designed to accommodate future error recover levels. Higher error recovery levels imply support in addition to support for the lower error level functions. In otherwords, error level 2 implies support for levels 0-1, since those functions are subsets of error level 2." DEFVAL { 0 } ::= { iscsiNodeAttributesEntry 16 } ---------------------------------------------------------------------- iscsiTarget OBJECT IDENTIFIER ::= { iscsiObjects 7 } -- Target Attributes Table iscsiTargetAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiTargetAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing managment information applicable to a particular node that can take on a target role." ::= { iscsiTarget 1 } iscsiTargetAttributesEntry OBJECT-TYPE SYNTAX IscsiTargetAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular target." INDEX { iscsiInstIndex, iscsiNodeIndex } ::= { iscsiTargetAttributesTable 1 } IscsiTargetAttributesEntry ::= SEQUENCE { iscsiTgtLoginFailures Counter, iscsiTgtLastFailureTime TimeTicks, iscsiTgtLastFailureType OCTET STRING, iscsiTgtLastIntrFailureName IscsiName, iscsiTgtLastIntrFailureAddrType InetAddressType, iscsiTgtLastIntrFailureAddr InetAddress } iscsiTgtLoginFailures OBJECT-TYPE SYNTAX Counter --UNITS "failed login attempts" ACCESS read-only STATUS mandatory DESCRIPTION "This object counts the number of times a login attempt to this local target has failed." ::= { iscsiTargetAttributesEntry 1 } iscsiTgtLastFailureTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The timestamp of the most recent failure of a login attempt to this target. A value of zero indicates that no such failures have occurred." ::= { iscsiTargetAttributesEntry 2 } iscsiTgtLastFailureType OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The type of the most recent failure of a login attempt to this target, represented as the OID of the counter object in iscsiTargetLoginStatsTable for which the relevant instance was incremented. A value of 0.0 indicates a type which is not represented by any of the counters in iscsiTargetLoginStatsTable." ::= { iscsiTargetAttributesEntry 3 } iscsiTgtLastIntrFailureName OBJECT-TYPE SYNTAX IscsiName ACCESS read-only STATUS mandatory DESCRIPTION "An octet string giving the name of the initiator that failed the last login attempt." ::= { iscsiTargetAttributesEntry 4 } iscsiTgtLastIntrFailureAddrType OBJECT-TYPE SYNTAX InetAddressType ACCESS read-only STATUS mandatory DESCRIPTION "The type of Internet Network Address in iscsiTgtLastIntrFailureAddr." DEFVAL { ipv4 } ::= { iscsiTargetAttributesEntry 5 } iscsiTgtLastIntrFailureAddr OBJECT-TYPE SYNTAX InetAddress ACCESS read-only STATUS mandatory DESCRIPTION "An Internet Network Address giving the host address of the initiator that failed the last login attempt." ::= { iscsiTargetAttributesEntry 6 } -- Target Login Stats Table iscsiTargetLoginStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiTargetLoginStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of counters which keep a record of the results of initiators' login attempts to this target." ::= { iscsiTarget 2 } iscsiTargetLoginStatsEntry OBJECT-TYPE SYNTAX IscsiTargetLoginStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing counters for each result of a login attempt to this target." INDEX { iscsiInstIndex, iscsiNodeIndex } --AUGMENTS { iscsiTargetAttributesEntry } ::= { iscsiTargetLoginStatsTable 1 } IscsiTargetLoginStatsEntry ::= SEQUENCE { iscsiTgtLoginAccepts Counter, iscsiTgtLoginOtherFails Counter, iscsiTgtLoginRedirects Counter, iscsiTgtLoginAuthorizeFails Counter, iscsiTgtLoginAuthenticateFails Counter, iscsiTgtLoginNegotiateFails Counter } iscsiTgtLoginAccepts OBJECT-TYPE SYNTAX Counter --UNITS "successful logins" ACCESS read-only STATUS mandatory DESCRIPTION "The count of Login Response PDUs with status 0x0000, Accept Login, transmitted by this target." ::= { iscsiTargetLoginStatsEntry 1 } iscsiTgtLoginOtherFails OBJECT-TYPE SYNTAX Counter --UNITS "failed logins" ACCESS read-only STATUS mandatory DESCRIPTION "The number of Login Response PDUs which were transmitted by this target, and which were not counted by any other object in the row." ::= { iscsiTargetLoginStatsEntry 2 } iscsiTgtLoginRedirects OBJECT-TYPE SYNTAX Counter --UNITS "failed logins" ACCESS read-only STATUS mandatory DESCRIPTION "The count of Login Response PDUs with status class 0x01, Redirection, transmitted by this target." ::= { iscsiTargetLoginStatsEntry 3 } iscsiTgtLoginAuthorizeFails OBJECT-TYPE SYNTAX Counter --UNITS "failed logins" ACCESS read-only STATUS mandatory DESCRIPTION "The count of Login Response PDUs with status 0x0202, Forbidden Target, transmitted by this target. If this counter is incremented, an iscsiTgtLoginFailure notification should be generated." ::= { iscsiTargetLoginStatsEntry 4 } iscsiTgtLoginAuthenticateFails OBJECT-TYPE SYNTAX Counter --UNITS "failed logins" ACCESS read-only STATUS mandatory DESCRIPTION "The count of Login Response PDUs with status 0x0201, Authentication Failed, transmitted by this target If this counter is incremented, an iscsiTgtLoginFailure notification should be generated." ::= { iscsiTargetLoginStatsEntry 5 } iscsiTgtLoginNegotiateFails OBJECT-TYPE SYNTAX Counter --UNITS "failed logins" ACCESS read-only STATUS mandatory DESCRIPTION "The number of times a target has effectively refused a login because the parameter negotiation failed. [Ed. While this situation can occur, the exact mechanism is as yet undefined in the iSCSI Protocol Spec.] If this counter is incremented, an iscsiTgtLoginFailure notification should be generated." ::= { iscsiTargetLoginStatsEntry 6 } -- Target Logout Stats Table iscsiTargetLogoutStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiTargetLogoutStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "When a target receives a Logout command, it responds with a Logout Response that carries a status code. This table contains counters for both normal and abnormal logout requests received by this target." ::= { iscsiTarget 3 } iscsiTargetLogoutStatsEntry OBJECT-TYPE SYNTAX IscsiTargetLogoutStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing counters of Logout Response PDUs that were received by this target." INDEX { iscsiInstIndex, iscsiNodeIndex } --AUGMENTS { iscsiTargetAttributesEntry } ::= { iscsiTargetLogoutStatsTable 1 } IscsiTargetLogoutStatsEntry ::= SEQUENCE { iscsiTgtLogoutNormals Counter, iscsiTgtLogoutOthers Counter } iscsiTgtLogoutNormals OBJECT-TYPE SYNTAX Counter --UNITS "normal logouts" ACCESS read-only STATUS mandatory DESCRIPTION "The count of Logout Command PDUs received by this target, with reason code 0 (closes the session)." ::= { iscsiTargetLogoutStatsEntry 1 } iscsiTgtLogoutOthers OBJECT-TYPE SYNTAX Counter --UNITS "abnormal logouts" ACCESS read-only STATUS mandatory DESCRIPTION "The count of Logout Command PDUs received by this target, with any status code other than 0." ::= { iscsiTargetLogoutStatsEntry 2 } ---------------------------------------------------------------------- iscsiTgtAuthorization OBJECT IDENTIFIER ::= { iscsiObjects 8 } -- Target Authorization Attributes Table iscsiTgtAuthAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiTgtAuthAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of initiator identities that are authorized to access each target node within each iSCSI instance present on the local system." ::= { iscsiTgtAuthorization 1 } iscsiTgtAuthAttributesEntry OBJECT-TYPE SYNTAX IscsiTgtAuthAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular target node's authorized initiator identity." INDEX { iscsiInstIndex, iscsiNodeIndex, iscsiTgtAuthIndex } ::= { iscsiTgtAuthAttributesTable 1 } IscsiTgtAuthAttributesEntry ::= SEQUENCE { iscsiTgtAuthIndex INTEGER, iscsiTgtAuthRowStatus RowStatus, iscsiTgtAuthIdentity RowPointer } iscsiTgtAuthIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular target's authorized initiator identity within an iSCSI instance present on the local system." ::= { iscsiTgtAuthAttributesEntry 1 } iscsiTgtAuthRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of the row." ::= { iscsiTgtAuthAttributesEntry 2 } iscsiTgtAuthIdentity OBJECT-TYPE SYNTAX RowPointer ACCESS read-write STATUS mandatory DESCRIPTION "A pointer to the corresponding IPS-AUTH MIB user entry that will be allowed to access this iSCSI target." -- REFERENCE -- "IPS-AUTH MIB" ::= { iscsiTgtAuthAttributesEntry 3 } ---------------------------------------------------------------------- iscsiInitiator OBJECT IDENTIFIER ::= { iscsiObjects 9 } -- Initiator Attributes Table iscsiInitiatorAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiInitiatorAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of iSCSI nodes that can take on an initiator role, belonging to each iSCSI instance present on the local system." ::= { iscsiInitiator 1 } iscsiInitiatorAttributesEntry OBJECT-TYPE SYNTAX IscsiInitiatorAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing managment information applicable to a particular iSCSI node that has initiator capabilities." INDEX { iscsiInstIndex, iscsiNodeIndex } ::= { iscsiInitiatorAttributesTable 1 } IscsiInitiatorAttributesEntry ::= SEQUENCE { iscsiIntrLoginFailures Counter, iscsiIntrLastFailureTime TimeTicks, iscsiIntrLastFailureType OCTET STRING, iscsiIntrLastTgtFailureName IscsiName, iscsiIntrLastTgtFailureAddrType InetAddressType, iscsiIntrLastTgtFailureAddr InetAddress } iscsiIntrLoginFailures OBJECT-TYPE SYNTAX Counter --UNITS "failed logins" ACCESS read-only STATUS mandatory DESCRIPTION "This object counts the number of times a login attempt from this local initiator has failed." ::= { iscsiInitiatorAttributesEntry 1 } iscsiIntrLastFailureTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The timestamp of the most recent failure of a login attempt from this initiator. A value of zero indicates that no such failures have occurred." ::= { iscsiInitiatorAttributesEntry 2 } iscsiIntrLastFailureType OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The type of the most recent failure of a login attempt from this initiator, represented as the OID of the counter object in iscsiInitiatorLoginStatsTable for which the relevant instance was incremented. A value of 0.0 indicates a type which is not represented by any of the counters in iscsiInitiatorLoginStatsTable." ::= { iscsiInitiatorAttributesEntry 3 } iscsiIntrLastTgtFailureName OBJECT-TYPE SYNTAX IscsiName ACCESS read-only STATUS mandatory DESCRIPTION "An octet string giving the name of the target that failed the last login attempt." ::= { iscsiInitiatorAttributesEntry 4 } iscsiIntrLastTgtFailureAddrType OBJECT-TYPE SYNTAX InetAddressType ACCESS read-only STATUS mandatory DESCRIPTION "The type of Internet Network Address in iscsiIntrLastTgtFailureAddr." DEFVAL { ipv4 } ::= { iscsiInitiatorAttributesEntry 5 } iscsiIntrLastTgtFailureAddr OBJECT-TYPE SYNTAX InetAddress ACCESS read-only STATUS mandatory DESCRIPTION "An Internet Network Address giving the host address of the target that failed the last login attempt." ::= { iscsiInitiatorAttributesEntry 6 } iscsiInitiatorLoginStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiInitiatorLoginStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of counters which keep track of the results of this initiator's login attempts." ::= { iscsiInitiator 2 } iscsiInitiatorLoginStatsEntry OBJECT-TYPE SYNTAX IscsiInitiatorLoginStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing counters of each result of this initiator's login attempts." INDEX { iscsiInstIndex, iscsiNodeIndex } -- AUGMENTS { iscsiInitiatorAttributesEntry } ::= { iscsiInitiatorLoginStatsTable 1 } IscsiInitiatorLoginStatsEntry ::= SEQUENCE { iscsiIntrLoginAcceptRsps Counter, iscsiIntrLoginOtherFailRsps Counter, iscsiIntrLoginRedirectRsps Counter, iscsiIntrLoginAuthFailRsps Counter, iscsiIntrLoginAuthenticateFails Counter, iscsiIntrLoginNegotiateFails Counter } iscsiIntrLoginAcceptRsps OBJECT-TYPE SYNTAX Counter --UNITS "successful logins" ACCESS read-only STATUS mandatory DESCRIPTION "The count of Login Response PDUs with status 0x0000, Accept Login, received by this initiator." ::= { iscsiInitiatorLoginStatsEntry 1 } iscsiIntrLoginOtherFailRsps OBJECT-TYPE SYNTAX Counter --UNITS "failed logins" ACCESS read-only STATUS mandatory DESCRIPTION "The count of Login Response PDUs received by this initiator with any status code not counted in the objects below." ::= { iscsiInitiatorLoginStatsEntry 2 } iscsiIntrLoginRedirectRsps OBJECT-TYPE SYNTAX Counter --UNITS "failed logins" ACCESS read-only STATUS mandatory DESCRIPTION "The count of Login Response PDUs with status class 0x01, Redirection, received by this initiator." ::= { iscsiInitiatorLoginStatsEntry 3 } iscsiIntrLoginAuthFailRsps OBJECT-TYPE SYNTAX Counter --UNITS "failed logins" ACCESS read-only STATUS mandatory DESCRIPTION "The count of Login Response PDUs with status class 0x201, Authentication Failed, received by this initiator." ::= { iscsiInitiatorLoginStatsEntry 4 } iscsiIntrLoginAuthenticateFails OBJECT-TYPE SYNTAX Counter --UNITS "failed logins" ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the initiator has aborted a login because the target could not be authenticated. No response is generated. If this counter is incremented, an iscsiIntrLoginFailure notification should be generated." ::= { iscsiInitiatorLoginStatsEntry 5 } iscsiIntrLoginNegotiateFails OBJECT-TYPE SYNTAX Counter --UNITS "failed logins" ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the initiator has aborted a login because parameter negotiation with the target failed. No response is generated. If this counter is incremented, an iscsiIntrLoginFailure notification should be generated." ::= { iscsiInitiatorLoginStatsEntry 6 } -- Initiator Logout Stats Table iscsiInitiatorLogoutStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiInitiatorLogoutStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "When an initiator attempts send a Logout command, the target responds with a Logout Response that carries a status code. This table contains a list of counters of Logout Response PDUs of each status code, that were received by each initiator belonging to this iSCSI instance present on this system." ::= { iscsiInitiator 3 } iscsiInitiatorLogoutStatsEntry OBJECT-TYPE SYNTAX IscsiInitiatorLogoutStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing counters of Logout Response PDUs of each status code, that were generated by this initiator." INDEX { iscsiInstIndex, iscsiNodeIndex } -- AUGMENTS { iscsiInitiatorAttributesEntry } ::= { iscsiInitiatorLogoutStatsTable 1 } IscsiInitiatorLogoutStatsEntry ::= SEQUENCE { iscsiIntrLogoutNormals Counter, iscsiIntrLogoutOthers Counter } iscsiIntrLogoutNormals OBJECT-TYPE SYNTAX Counter --UNITS "normal logouts" ACCESS read-only STATUS mandatory DESCRIPTION "The count of Logout Command PDUs generated by this initiator with reason code 0 (closes the session)." ::= { iscsiInitiatorLogoutStatsEntry 1 } iscsiIntrLogoutOthers OBJECT-TYPE SYNTAX Counter --UNITS "abnormal logouts" ACCESS read-only STATUS mandatory DESCRIPTION "The count of Logout Command PDUs generated by this initiator with any status code other than 0." ::= { iscsiInitiatorLogoutStatsEntry 2 } ---------------------------------------------------------------------- iscsiIntrAuthorization OBJECT IDENTIFIER ::= { iscsiObjects 10 } -- Initiator Authorization Attributes Table iscsiIntrAuthAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiIntrAuthAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of target identities which each initiator on the local system may access." ::= { iscsiIntrAuthorization 1 } iscsiIntrAuthAttributesEntry OBJECT-TYPE SYNTAX IscsiIntrAuthAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing managment information applicable to a particular initiator node's authorized target identity." INDEX { iscsiInstIndex, iscsiNodeIndex, iscsiIntrAuthIndex } ::= { iscsiIntrAuthAttributesTable 1 } IscsiIntrAuthAttributesEntry ::= SEQUENCE { iscsiIntrAuthIndex INTEGER, iscsiIntrAuthRowStatus RowStatus, iscsiIntrAuthIdentity RowPointer } iscsiIntrAuthIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular initiator node's authorized target identity within an iSCSI instance present on the local system." ::= { iscsiIntrAuthAttributesEntry 1 } iscsiIntrAuthRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "The status of the row." ::= { iscsiIntrAuthAttributesEntry 2 } iscsiIntrAuthIdentity OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "A pointer to the corresponding IPS-AUTH MIB user entry to which this initiator node should attempt to establish an iSCSI session." -- REFERENCE -- "IPS-AUTH MIB" ::= { iscsiIntrAuthAttributesEntry 3 } ---------------------------------------------------------------------- iscsiSession OBJECT IDENTIFIER ::= { iscsiObjects 11 } -- Session Attributes Table iscsiSessionAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiSessionAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of sessions belonging to each iSCSI instance present on the system." ::= { iscsiSession 1 } iscsiSessionAttributesEntry OBJECT-TYPE SYNTAX IscsiSessionAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular session." INDEX { iscsiInstIndex, iscsiSsnNodeIndex, iscsiSsnIndex } ::= { iscsiSessionAttributesTable 1 } IscsiSessionAttributesEntry ::= SEQUENCE { iscsiSsnNodeIndex INTEGER, iscsiSsnIndex INTEGER, iscsiSsnDirection INTEGER, iscsiSsnInitiatorName IscsiName, iscsiSsnTargetName IscsiName, iscsiSsnTSIH INTEGER, iscsiSsnISID OCTET STRING, iscsiSsnInitiatorAlias SnmpAdminString, iscsiSsnTargetAlias SnmpAdminString, iscsiSsnInitialR2T TruthValue, iscsiSsnImmediateData TruthValue, iscsiSsnType INTEGER, iscsiSsnMaxOutstandingR2T INTEGER, iscsiSsnFirstBurstLength INTEGER, iscsiSsnMaxBurstLength INTEGER, iscsiSsnConnectionNumber Gauge, iscsiSsnAuthIdentity RowPointer, iscsiSsnDataSequenceInOrder TruthValue, iscsiSsnDataPDUInOrder TruthValue, iscsiSsnErrorRecoveryLevel INTEGER } iscsiSsnNodeIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system. For normal, non-discovery sessions, this value will map to the iscsiNodeIndex. For discovery sessions which do not have a node associated, the value 0 (zero) is used." ::= { iscsiSessionAttributesEntry 1 } iscsiSsnIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular session within an iSCSI instance present on the local system." ::= { iscsiSessionAttributesEntry 2 } iscsiSsnDirection OBJECT-TYPE SYNTAX INTEGER { inboundSession(1), outboundSession(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Direction of iSCSI session: InboundSession - session is established from an external initiator to a target within this iSCSI instance. OutboundSession - session is established from an initiator within this iSCSI instance to an external target." ::= { iscsiSessionAttributesEntry 3 } iscsiSsnInitiatorName OBJECT-TYPE SYNTAX IscsiName ACCESS read-only STATUS mandatory DESCRIPTION "If iscsiSsnDirection is Inbound, this object is an octet string that will contain the name of the remote initiator. If this session is a discovery session that does not specify a particular initiator, this object will contain a zero-length string. If iscsiSsnDirection is Outbound, this object will contain a zero-length string." ::= { iscsiSessionAttributesEntry 4 } iscsiSsnTargetName OBJECT-TYPE SYNTAX IscsiName ACCESS read-only STATUS mandatory DESCRIPTION "If iscsiSsnDirection is Outbound, this object is an octet string that will contain the name of the remote target. If this session is a discovery session that does not specify a particular target, this object will contain a zero-length string. If iscsiSsnDirection is Inbound, this object will contain a zero-length string." ::= { iscsiSessionAttributesEntry 5 } iscsiSsnTSIH OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The target-defined identification handle for this session." ::= { iscsiSessionAttributesEntry 6 } iscsiSsnISID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) ACCESS read-only STATUS mandatory DESCRIPTION "The initiator-defined portion of the iSCSI Session ID." ::= { iscsiSessionAttributesEntry 7 } iscsiSsnInitiatorAlias OBJECT-TYPE SYNTAX SnmpAdminString ACCESS read-only STATUS mandatory DESCRIPTION "An octet string that gives the alias communicated by the initiator end of the session during the login phase. If no alias exists, the value is a zero-length string." ::= { iscsiSessionAttributesEntry 8 } iscsiSsnTargetAlias OBJECT-TYPE SYNTAX SnmpAdminString ACCESS read-only STATUS mandatory DESCRIPTION "An octet string that gives the alias communicated by the target end of the session during the login phase. If no alias exists, the value is a zero-length string." ::= { iscsiSessionAttributesEntry 9 } iscsiSsnInitialR2T OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "If set to true, indicates that the initiator must wait for an R2T before sending to the target. If set to false, the initiator may send data immediately, within limits set by iscsiSsnFirstBurstLength and the expected data transfer length of the request. Default is true." ::= { iscsiSessionAttributesEntry 10 } iscsiSsnImmediateData OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the initiator and target have agreed to support immediate data on this session." ::= { iscsiSessionAttributesEntry 11 } iscsiSsnType OBJECT-TYPE SYNTAX INTEGER { normalSession(1), discoverySession(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of iSCSI session: normalSession - session is a normal iSCSI session discoverySession - session is being used only for discovery." DEFVAL { normalSession } ::= { iscsiSessionAttributesEntry 12 } iscsiSsnMaxOutstandingR2T OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of outstanding request-to-transmit (R2T)s per task within this session." ::= { iscsiSessionAttributesEntry 13 } iscsiSsnFirstBurstLength OBJECT-TYPE SYNTAX INTEGER (512..16777215) -- --UNITS "bytes" ACCESS read-only STATUS mandatory DESCRIPTION "The maximum length supported for unsolicited data sent within this session." DEFVAL { 65536 } ::= { iscsiSessionAttributesEntry 14 } iscsiSsnMaxBurstLength OBJECT-TYPE SYNTAX INTEGER (512..16777215) -- --UNITS "bytes" ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of bytes which can be sent within a single sequence of Data-In or Data-Out PDUs." DEFVAL { 262144 } ::= { iscsiSessionAttributesEntry 15 } iscsiSsnConnectionNumber OBJECT-TYPE SYNTAX Gauge (1..65535) --UNITS "connections" ACCESS read-only STATUS mandatory DESCRIPTION "The number of transport protocol connections that currently belong to this session." ::= { iscsiSessionAttributesEntry 16 } iscsiSsnAuthIdentity OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "This object contains a row in the IPS-AUTH MIB which identifies the authentication method being used on this session, as communicated during the login phase." -- REFERENCE -- "IPS-AUTH MIB" ::= { iscsiSessionAttributesEntry 17 } iscsiSsnDataSequenceInOrder OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "False indicates that iSCSI data PDU sequences may be transferred in any order. True indicates that data PDU sequences must be tranferred using continuously increasing offsets, except during error recovery." ::= { iscsiSessionAttributesEntry 18 } iscsiSsnDataPDUInOrder OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "False indicates that iSCSI data PDUs within sequences may be in any order. True indicates that data PDUs within sequences must be at continuously increasing addresses, with no gaps or overlay between PDUs. Default is true." ::= { iscsiSessionAttributesEntry 19 } iscsiSsnErrorRecoveryLevel OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The level of error recovery negotiated between the initiator and the target. Higher numbers represent more detailed recovery schemes." ::= { iscsiSessionAttributesEntry 20 } -- Session Stats Table iscsiSessionStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiSessionStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of general iSCSI traffic counters for each of the sessions present on the system." ::= { iscsiSession 2 } iscsiSessionStatsEntry OBJECT-TYPE SYNTAX IscsiSessionStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing general iSCSI traffic counters for a particular session." INDEX { iscsiInstIndex, iscsiNodeIndex, iscsiSsnIndex } -- AUGMENTS { iscsiSessionAttributesEntry } ::= { iscsiSessionStatsTable 1 } IscsiSessionStatsEntry ::= SEQUENCE { iscsiSsnCmdPDUs Counter, iscsiSsnRspPDUs Counter, -- iscsiSsnTxDataOctets Counter64, -- iscsiSsnRxDataOctets Counter64, iscsiSsnLCTxDataOctets Counter, iscsiSsnLCRxDataOctets Counter } iscsiSsnCmdPDUs OBJECT-TYPE SYNTAX Counter --UNITS "PDUs" ACCESS read-only STATUS mandatory DESCRIPTION "The count of Command PDUs transferred on this session." ::= { iscsiSessionStatsEntry 1 } iscsiSsnRspPDUs OBJECT-TYPE SYNTAX Counter --UNITS "PDUs" ACCESS read-only STATUS mandatory DESCRIPTION "The count of Response PDUs transferred on this session." ::= { iscsiSessionStatsEntry 2 } -- iscsiSsnTxDataOctets OBJECT-TYPE -- SYNTAX Counter64 -- UNITS "octets" -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "The count of data octets that were transmitted by -- the local iSCSI node on this session." -- ::= { iscsiSessionStatsEntry 3 } -- iscsiSsnRxDataOctets OBJECT-TYPE -- SYNTAX Counter64 -- UNITS "octets" -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "The count of data octets that were received by -- the local iSCSI node on this session." -- ::= { iscsiSessionStatsEntry 4 } iscsiSsnLCTxDataOctets OBJECT-TYPE SYNTAX Counter --UNITS "octets" ACCESS read-only STATUS mandatory DESCRIPTION "A Low Capacity shadow object of iscsiSsnTxDataOctets for those systems that don't support Counter64." ::= { iscsiSessionStatsEntry 5 } iscsiSsnLCRxDataOctets OBJECT-TYPE SYNTAX Counter --UNITS "octets" ACCESS read-only STATUS mandatory DESCRIPTION "A Low Capacity shadow object of iscsiSsnRxDataOctets for those systems that don't support Counter64." ::= { iscsiSessionStatsEntry 6 } iscsiSessionCxnErrorStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiSessionCxnErrorStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of error counters for each of the sessions present on this system." ::= { iscsiSession 3 } iscsiSessionCxnErrorStatsEntry OBJECT-TYPE SYNTAX IscsiSessionCxnErrorStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing error counters for a particular session." INDEX { iscsiInstIndex, iscsiNodeIndex, iscsiSsnIndex } -- AUGMENTS { iscsiSessionAttributesEntry } ::= { iscsiSessionCxnErrorStatsTable 1 } IscsiSessionCxnErrorStatsEntry ::= SEQUENCE { iscsiSsnDigestErrors Counter, iscsiSsnCxnTimeoutErrors Counter } iscsiSsnDigestErrors OBJECT-TYPE SYNTAX Counter --UNITS "PDUs" ACCESS read-only STATUS mandatory DESCRIPTION "The count of PDUs which were received on the session and contained header or data digest errors." ::= { iscsiSessionCxnErrorStatsEntry 1 } iscsiSsnCxnTimeoutErrors OBJECT-TYPE SYNTAX Counter --UNITS "sequences" ACCESS read-only STATUS mandatory DESCRIPTION "The count of connections within this session which have been terminated due to timeout." ::= { iscsiSessionCxnErrorStatsEntry 2 } iscsiConnection OBJECT IDENTIFIER ::= { iscsiObjects 12 } iscsiConnectionAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiConnectionAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of connections belonging to each iSCSI instance present on the system." ::= { iscsiConnection 1 } iscsiConnectionAttributesEntry OBJECT-TYPE SYNTAX IscsiConnectionAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular connection." INDEX { iscsiInstIndex, iscsiNodeIndex, iscsiSsnIndex, iscsiCxnIndex } ::= { iscsiConnectionAttributesTable 1 } IscsiConnectionAttributesEntry ::= SEQUENCE { iscsiCxnIndex INTEGER, iscsiCxnCid INTEGER, iscsiCxnState INTEGER, iscsiCxnLocalAddrType InetAddressType, iscsiCxnLocalAddr InetAddress, iscsiCxnProtocol IscsiTransportProtocols, iscsiCxnLocalPort INTEGER, iscsiCxnRemoteAddrType InetAddressType, iscsiCxnRemoteAddr InetAddress, iscsiCxnRemotePort INTEGER, iscsiCxnMaxRecvDataSegLength INTEGER, iscsiCxnMaxXmitDataSegLength INTEGER, iscsiCxnHeaderIntegrity IscsiDigestMethod, iscsiCxnDataIntegrity IscsiDigestMethod, iscsiCxnRecvMarker TruthValue, iscsiCxnSendMarker TruthValue, iscsiCxnVersionActive INTEGER } iscsiCxnIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular connection of a particular session within an iSCSI instance present on the local system." ::= { iscsiConnectionAttributesEntry 1 } iscsiCxnCid OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The iSCSI Connection ID for this connection." ::= { iscsiConnectionAttributesEntry 2 } iscsiCxnState OBJECT-TYPE SYNTAX INTEGER { login(1), full(2), logout(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of this connection, from an iSCSI negotiation point of view. Here are the states: login - The transport protocol connection has been established, but a valid iSCSI login response with the final bit set has not been sent or received. full - A valid iSCSI login response with the final bit set has been sent or received. logout - A valid iSCSI logout command has been sent or received, but the transport protocol connection has not yet been closed." ::= { iscsiConnectionAttributesEntry 3 } iscsiCxnLocalAddrType OBJECT-TYPE SYNTAX InetAddressType ACCESS read-only STATUS mandatory DESCRIPTION "The type of Internet Network Address in iscsiCxnLocalAddr." DEFVAL { ipv4 } ::= { iscsiConnectionAttributesEntry 4 } iscsiCxnLocalAddr OBJECT-TYPE SYNTAX InetAddress ACCESS read-only STATUS mandatory DESCRIPTION "The local Internet Network Address used by this connection." ::= { iscsiConnectionAttributesEntry 5 } iscsiCxnProtocol OBJECT-TYPE SYNTAX IscsiTransportProtocols ACCESS read-only STATUS mandatory DESCRIPTION "The transport protocol over which this connection is running." DEFVAL { 6 } ::= { iscsiConnectionAttributesEntry 6 } iscsiCxnLocalPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The local transport protocol port used by this connection." ::= { iscsiConnectionAttributesEntry 7 } iscsiCxnRemoteAddrType OBJECT-TYPE SYNTAX InetAddressType ACCESS read-only STATUS mandatory DESCRIPTION "The type of Internet Network Address in iscsiCxnRemoteAddr." DEFVAL { ipv4 } ::= { iscsiConnectionAttributesEntry 8 } iscsiCxnRemoteAddr OBJECT-TYPE SYNTAX InetAddress ACCESS read-only STATUS mandatory DESCRIPTION "The remote Internet Network Address used by this connection." ::= { iscsiConnectionAttributesEntry 9 } iscsiCxnRemotePort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The remote transport protocol port used by this connection." ::= { iscsiConnectionAttributesEntry 10 } iscsiCxnMaxRecvDataSegLength OBJECT-TYPE SYNTAX INTEGER (512..16777215) --UNITS "bytes" ACCESS read-only STATUS mandatory DESCRIPTION "The maximum data payload size supported for command or data PDUs in use within this connection. Note that the size of reported in bytes even though the negotiation is in 512k blocks." DEFVAL { 8192 } ::= { iscsiConnectionAttributesEntry 11 } iscsiCxnMaxXmitDataSegLength OBJECT-TYPE SYNTAX INTEGER (512..16777215) --UNITS "bytes" ACCESS read-only STATUS mandatory DESCRIPTION "The maximum data payload size supported for command or data PDUs to be sent on this connection." DEFVAL { 8192 } ::= { iscsiConnectionAttributesEntry 12 } iscsiCxnHeaderIntegrity OBJECT-TYPE SYNTAX IscsiDigestMethod ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the iSCSI header digest scheme in use within this connection." ::= { iscsiConnectionAttributesEntry 13 } iscsiCxnDataIntegrity OBJECT-TYPE SYNTAX IscsiDigestMethod ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the iSCSI data digest scheme in use within this connection." ::= { iscsiConnectionAttributesEntry 14 } iscsiCxnRecvMarker OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates whether or not this connection is receiving markers in in its incoming data stream." DEFVAL { false } ::= { iscsiConnectionAttributesEntry 15 } iscsiCxnSendMarker OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates whether or not this connection is inserting markers in in its outgoing data stream." DEFVAL { false } ::= { iscsiConnectionAttributesEntry 16 } iscsiCxnVersionActive OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Active version number of the iSCSI specification negotiated on this connection." ::= { iscsiConnectionAttributesEntry 17 } ------------------------------------------------------------------------ -- Notifications iscsiNotifications OBJECT IDENTIFIER ::= { iscsiModule 2 } -- iscsiNotificationsPrefix OBJECT IDENTIFIER ::= { iscsiNotifications 0 } -- iscsiConformance OBJECT IDENTIFIER ::= { iscsiModule 3 } -- iscsiGroups OBJECT IDENTIFIER ::= { iscsiConformance 1 } -- iscsiCompliances OBJECT IDENTIFIER ::= { iscsiConformance 2 } iscsiTgtLoginFailure TRAP-TYPE ENTERPRISE iscsiNotifications VARIABLES { iscsiTgtLoginFailures, iscsiTgtLastFailureType, iscsiTgtLastIntrFailureName, iscsiTgtLastIntrFailureAddrType, iscsiTgtLastIntrFailureAddr } --STATUS mandatory DESCRIPTION "Sent when a login is failed by a target. The implementation of this trap should not send more than 3 notifications of this type in any 10 second time span." ::= 1 iscsiIntrLoginFailure TRAP-TYPE ENTERPRISE iscsiNotifications VARIABLES { iscsiIntrLoginFailures, iscsiIntrLastFailureType, iscsiIntrLastTgtFailureName, iscsiIntrLastTgtFailureAddrType, iscsiIntrLastTgtFailureAddr } --STATUS mandatory DESCRIPTION "Sent when a login is failed by a initiator. The implementation of this trap should not send more than 3 notifications of this type in any 10 second time span." ::= 2 iscsiInstSessionFailure TRAP-TYPE ENTERPRISE iscsiNotifications VARIABLES { iscsiInstSsnFailures, iscsiInstLastSsnFailureType, iscsiInstLastSsnRmtNodeName } --STATUS mandatory DESCRIPTION "Sent when an active session is failed by either the initiator or the target. The implementation of this trap should not send more than 3 notifications of this type in any 10 second time span." ::= 3 -- iscsiInstanceAttributesGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 1 } -- iscsiInstanceAttributesGroup OBJECT-GROUP -- OBJECTS { iscsiInstDescr, iscsiInstVersionMin, -- iscsiInstVersionMax, iscsiInstVendorID, -- iscsiInstVendorVersion, iscsiInstPortalNumber, -- iscsiInstNodeNumber, iscsiInstSessionNumber, -- iscsiInstSsnFailures, iscsiInstLastSsnFailureType, -- iscsiInstLastSsnRmtNodeName } -- STATUS mandatory -- DESCRIPTION -- "A collection of objects providing information about iSCSI -- instances." -- ::= { iscsiGroups 1 } -- iscsiInstanceSsnErrorStatsGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 2 } -- iscsiInstanceSsnErrorStatsGroup OBJECT-GROUP -- OBJECTS { iscsiInstSsnDigestErrors, -- iscsiInstSsnCxnTimeoutErrors, -- iscsiInstSsnFormatErrors } -- STATUS mandatory -- DESCRIPTION -- "A collection of objects providing information about -- errors that have caused a session failure for an -- iSCSI instance." -- ::= { iscsiGroups 2 } -- iscsiPortalAttributesGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 3 } -- iscsiPortalAttributesGroup OBJECT-GROUP -- OBJECTS { iscsiPortalRowStatus, iscsiPortalRoles, -- iscsiPortalAddrType, iscsiPortalAddr, -- iscsiPortalProtocol, -- iscsiPortalMaxRecvDataSegLength, -- iscsiPortalPrimaryHdrDigest, -- iscsiPortalPrimaryDataDigest, -- iscsiPortalSecondaryHdrDigest, -- iscsiPortalSecondaryDataDigest, -- iscsiPortalRecvMarker } -- STATUS mandatory -- DESCRIPTION -- "A collection of objects providing information about -- the transport protocol endpoints of the local targets." -- ::= { iscsiGroups 3 } -- iscsiTgtPortalAttributesGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 4 } -- iscsiTgtPortalAttributesGroup OBJECT-GROUP -- OBJECTS { iscsiTgtPortalPort, iscsiTgtPortalTag } -- STATUS mandatory -- DESCRIPTION -- "A collection of objects providing information about -- the transport protocol endpoints of the local targets." -- ::= { iscsiGroups 4 } -- iscsiIntrPortalAttributesGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 5 } -- iscsiIntrPortalAttributesGroup OBJECT-GROUP -- OBJECTS { iscsiIntrPortalTag } -- STATUS mandatory -- DESCRIPTION -- "A collection of objects providing information about -- the Internet Network Addresses of the local initiators." -- ::= { iscsiGroups 5 } -- iscsiNodeAttributesGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 6 } -- iscsiNodeAttributesGroup OBJECT-GROUP -- OBJECTS { iscsiNodeName, iscsiNodeAlias, iscsiNodeRoles, -- iscsiNodeTransportType, iscsiNodeInitialR2T, -- iscsiNodeImmediateData, iscsiNodeMaxOutstandingR2T, -- iscsiNodeFirstBurstLength, iscsiNodeMaxBurstLength, -- iscsiNodeMaxConnections, -- iscsiNodeDataSequenceInOrder, -- iscsiNodeDataPDUInOrder, iscsiNodeDefaultTime2Wait, -- iscsiNodeDefaultTime2Retain, -- iscsiNodeErrorRecoveryLevel } -- STATUS mandatory -- DESCRIPTION -- "A collection of objects providing information about all -- local targets." -- ::= { iscsiGroups 6 } -- iscsiTargetAttributesGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 7 } -- iscsiTargetAttributesGroup OBJECT-GROUP -- OBJECTS { iscsiTgtLoginFailures, iscsiTgtLastFailureTime, -- iscsiTgtLastFailureType, -- iscsiTgtLastIntrFailureName, -- iscsiTgtLastIntrFailureAddrType, -- iscsiTgtLastIntrFailureAddr } -- STATUS mandatory -- DESCRIPTION -- "A collection of objects providing information about all -- local targets." -- ::= { iscsiGroups 7 } -- iscsiTargetLoginStatsGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 8 } -- iscsiTargetLoginStatsGroup OBJECT-GROUP -- OBJECTS { iscsiTgtLoginAccepts, iscsiTgtLoginOtherFails, -- iscsiTgtLoginRedirects, iscsiTgtLoginAuthorizeFails, -- iscsiTgtLoginAuthenticateFails, -- iscsiTgtLoginNegotiateFails } -- STATUS mandatory -- DESCRIPTION -- "A collection of objects providing information about all -- login attempts by remote initiators to local targets." -- ::= { iscsiGroups 8 } -- iscsiTargetLogoutStatsGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 9 } -- iscsiTargetLogoutStatsGroup OBJECT-GROUP -- OBJECTS { iscsiTgtLogoutNormals, iscsiTgtLogoutOthers } -- STATUS mandatory -- DESCRIPTION -- "A collection of objects providing information about all -- logout events between remote initiators to local targets." -- ::= { iscsiGroups 9 } -- iscsiTargetAuthGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 10 } -- iscsiTargetAuthGroup OBJECT-GROUP -- OBJECTS { iscsiTgtAuthRowStatus, iscsiTgtAuthIdentity } -- STATUS mandatory -- DESCRIPTION -- "." -- ::= { iscsiGroups 10 } -- iscsiInitiatorAttributesGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 11 } -- iscsiInitiatorAttributesGroup OBJECT-GROUP -- OBJECTS { iscsiIntrLoginFailures, iscsiIntrLastFailureTime, -- iscsiIntrLastFailureType, -- iscsiIntrLastTgtFailureName, -- iscsiIntrLastTgtFailureAddrType, -- iscsiIntrLastTgtFailureAddr } -- STATUS mandatory -- DESCRIPTION -- "A collection of objects providing information about -- all local initiators." -- ::= { iscsiGroups 11 } -- iscsiInitiatorLoginStatsGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 12 } -- iscsiInitiatorLoginStatsGroup OBJECT-GROUP -- OBJECTS { iscsiIntrLoginAcceptRsps, -- iscsiIntrLoginOtherFailRsps, -- iscsiIntrLoginRedirectRsps, -- iscsiIntrLoginAuthFailRsps, -- iscsiIntrLoginAuthenticateFails, -- iscsiIntrLoginNegotiateFails } -- STATUS mandatory -- DESCRIPTION -- "A collection of objects providing information about all -- login attempts by local initiators to remote targets." -- ::= { iscsiGroups 12 } -- iscsiInitiatorLogoutStatsGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 13 } -- iscsiInitiatorLogoutStatsGroup OBJECT-GROUP -- OBJECTS { iscsiIntrLogoutNormals, iscsiIntrLogoutOthers } -- STATUS mandatory -- DESCRIPTION -- "A collection of objects providing information about all -- logout events between local initiators to remote targets." -- ::= { iscsiGroups 13 } -- iscsiInitiatorAuthGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 14 } -- iscsiInitiatorAuthGroup OBJECT-GROUP -- OBJECTS { iscsiIntrAuthRowStatus, iscsiIntrAuthIdentity } -- STATUS mandatory -- DESCRIPTION -- "." -- ::= { iscsiGroups 14 } -- iscsiSessionAttributesGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 15 } -- iscsiSessionAttributesGroup OBJECT-GROUP -- OBJECTS { iscsiSsnDirection, iscsiSsnInitiatorName, -- iscsiSsnTargetName, iscsiSsnTSIH, iscsiSsnISID, -- iscsiSsnInitiatorAlias, iscsiSsnTargetAlias, -- iscsiSsnInitialR2T, iscsiSsnImmediateData, -- iscsiSsnType, iscsiSsnMaxOutstandingR2T, -- iscsiSsnFirstBurstLength, iscsiSsnMaxBurstLength, -- iscsiSsnConnectionNumber, iscsiSsnAuthIdentity, -- iscsiSsnDataSequenceInOrder, iscsiSsnDataPDUInOrder, -- iscsiSsnErrorRecoveryLevel } -- STATUS mandatory -- DESCRIPTION -- "A collection of objects providing information applicable to -- all sessions." -- ::= { iscsiGroups 15 } -- iscsiSessionPDUStatsGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 16 } -- iscsiSessionPDUStatsGroup OBJECT-GROUP -- OBJECTS { iscsiSsnCmdPDUs, iscsiSsnRspPDUs } -- STATUS mandatory -- DESCRIPTION -- "A collection of objects providing information about PDU -- traffic for each session." -- ::= { iscsiGroups 16 } -- iscsiSessionOctetStatsGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 17 } -- iscsiSessionOctetStatsGroup OBJECT-GROUP -- OBJECTS { iscsiSsnTxDataOctets, iscsiSsnRxDataOctets } -- STATUS mandatory -- DESCRIPTION -- "A collection of objects providing information about octet -- traffic for each session using a Counter64 data type." -- ::= { iscsiGroups 17 } -- iscsiSessionLCOctetStatsGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 18 } -- iscsiSessionLCOctetStatsGroup OBJECT-GROUP -- OBJECTS { iscsiSsnLCTxDataOctets, iscsiSsnLCRxDataOctets } -- STATUS mandatory -- DESCRIPTION -- "A collection of objects providing information about octet -- traffic for each session using a Counter32 data type." -- ::= { iscsiGroups 18 } -- iscsiSessionCxnErrorStatsGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 19 } -- iscsiSessionCxnErrorStatsGroup OBJECT-GROUP -- OBJECTS { iscsiSsnDigestErrors, iscsiSsnCxnTimeoutErrors } -- STATUS mandatory -- DESCRIPTION -- "A collection of objects providing information about connection -- errors for all sessions." -- ::= { iscsiGroups 19 } -- iscsiConnectionAttributesGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 20 } -- iscsiConnectionAttributesGroup OBJECT-GROUP -- OBJECTS { iscsiCxnCid, iscsiCxnState, iscsiCxnProtocol, -- iscsiCxnLocalAddrType, iscsiCxnLocalAddr, -- iscsiCxnLocalPort, iscsiCxnRemoteAddrType, -- iscsiCxnRemoteAddr, iscsiCxnRemotePort, -- iscsiCxnMaxRecvDataSegLength, -- iscsiCxnHeaderIntegrity, iscsiCxnDataIntegrity, -- iscsiCxnRecvMarker, iscsiCxnSendMarker } -- STATUS mandatory -- DESCRIPTION -- "A collection of objects providing information about all -- connections used by all sessions." -- ::= { iscsiGroups 20 } -- iscsiTgtLgnNotificationsGroup OBJECT IDENTIFIER -- ::= { iscsiGroups 21 } -- iscsiTgtLgnNotificationsGroup NOTIFICATION-GROUP -- NOTIFICATIONS { iscsiTgtLoginFailure } -- STATUS mandatory -- DESCRIPTION -- "A collection of notifications which indicate a login -- failure from a remote initiator to a local target." -- ::= { iscsiGroups 21 } -- iscsiIntrLgnNotificationsGroup OBJECT IDENTIFIER ::= { iscsiGroups 22 } -- iscsiIntrLgnNotificationsGroup NOTIFICATION-GROUP -- NOTIFICATIONS { iscsiIntrLoginFailure } -- STATUS mandatory -- DESCRIPTION -- "A collection of notifications which indicate a login -- failure from a local initiator to a remote target." -- ::= { iscsiGroups 22 } -- iscsiSsnFlrNotificationsGroup OBJECT IDENTIFIER ::= { iscsiGroups 23 } -- iscsiSsnFlrNotificationsGroup NOTIFICATION-GROUP -- NOTIFICATIONS { iscsiInstSessionFailure } -- STATUS mandatory -- DESCRIPTION -- "A collection of notifications which indicate session -- failures occurring after login." -- ::= { iscsiGroups 23 } -- iscsiComplianceV1 OBJECT IDENTIFIER ::= { iscsiCompliances 1 } -- iscsiComplianceV1 MODULE-COMPLIANCE -- STATUS mandatory -- DESCRIPTION -- "Initial version of compliance statement based on -- initial version of MIB. -- -- If an implementation can be both a target and an -- initiator, all groups are mandatory." -- MODULE -- -- this module -- MANDATORY-GROUPS { iscsiInstanceAttributesGroup, -- iscsiPortalAttributesGroup, -- iscsiNodeAttributesGroup, -- iscsiSessionAttributesGroup, -- iscsiSessionPDUStatsGroup, -- iscsiSessionCxnErrorStatsGroup, -- iscsiConnectionAttributesGroup, -- iscsiSsnFlrNotificationsGroup } -- GROUP iscsiSessionOctetStatsGroup -- DESCRIPTION -- "This group is mandatory for all iSCSI implementations -- that can support Counter64 data types." -- GROUP iscsiSessionLCOctetStatsGroup -- DESCRIPTION -- "This group is mandatory for all iSCSI implementations -- that provide information to SNMPv1-only applications; -- this includes agents that cannot support Counter64 -- data types." -- GROUP iscsiTgtPortalAttributesGroup -- DESCRIPTION -- "This group is mandatory for all iSCSI implementations -- that have iSCSI target facilities." -- GROUP iscsiTargetAttributesGroup -- DESCRIPTION -- "This group is mandatory for all iSCSI implementations -- that have iSCSI target facilities." -- GROUP iscsiTargetLoginStatsGroup -- DESCRIPTION -- "This group is mandatory for all iSCSI implementations -- that have iSCSI target facilities." -- GROUP iscsiTargetLogoutStatsGroup -- DESCRIPTION -- "This group is mandatory for all iSCSI implementations -- that have iSCSI target facilities." -- GROUP iscsiTgtLgnNotificationsGroup -- DESCRIPTION -- "This group is mandatory for all iSCSI implementations -- that have iSCSI target facilities." -- GROUP iscsiTargetAuthGroup -- DESCRIPTION -- "This group is mandatory for all iSCSI implementations -- that have iSCSI target facilities." -- GROUP iscsiIntrPortalAttributesGroup -- DESCRIPTION -- "This group is mandatory for all iSCSI implementations -- that have iSCSI initiator facilities." -- GROUP iscsiInitiatorAttributesGroup -- DESCRIPTION -- "This group is mandatory for all iSCSI implementations -- that have iSCSI initiator facilities." -- GROUP iscsiInitiatorLoginStatsGroup -- DESCRIPTION -- "This group is mandatory for all iSCSI implementations -- that have iSCSI initiator facilities." -- GROUP iscsiInitiatorLogoutStatsGroup -- DESCRIPTION -- "This group is mandatory for all iSCSI implementations -- that have iSCSI initiator facilities." -- GROUP iscsiIntrLgnNotificationsGroup -- DESCRIPTION -- "This group is mandatory for all iSCSI implementations -- that have iSCSI initiator facilities." -- GROUP iscsiInitiatorAuthGroup -- DESCRIPTION -- "This group is mandatory for all iSCSI implementations -- that have iSCSI initiator facilities." -- ::= { iscsiCompliances 1 } END -- end of module ISCSI-MIB.