-- SECTION 1: Top Level Definitions


CENTILLION-SOURCE-ROUTING-MIB DEFINITIONS ::= BEGIN


-- Centillion Source Routing MIB Release 2.0.0
-- Revision 03/20/96

-- Copyright 1994-96 Bay Networks, Inc.
-- All rights reserved.
-- This Bay Networks SNMP Management Information Base Specification
-- (Specification) embodies Bay Networks' confidential and
-- proprietary intellectual property. Bay Networks retains all
-- title and ownership in the Specification, including any
-- revisions.

-- This Specification is supplied "AS IS," and Bay Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.


-- Imports

IMPORTS
	EnableIndicator
		FROM CENTILLION-ROOT-MIB
	cndot1dSr
		FROM CENTILLION-BRIDGE-MIB
	OBJECT-TYPE
		FROM RFC-1212;


-- SECTION 2: Source Routing Port Table 

cndot1dSrPortTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF Cndot1dSrPortEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"A table that contains information about every
		port that is associated with this source route
		bridge."
	::= { cndot1dSr 1 }

cndot1dSrPortEntry OBJECT-TYPE
	SYNTAX  Cndot1dSrPortEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"A list of information for each port of a source
		route bridge."
	INDEX   { cndot1dSrPort }
	::= { cndot1dSrPortTable 1 }

Cndot1dSrPortEntry ::= SEQUENCE {
	cndot1dSrPort
		INTEGER,
	cndot1dSrPortAREHopCount
		INTEGER,
	cndot1dSrPortSTEHopCount
		INTEGER
	}

cndot1dSrPort OBJECT-TYPE
	SYNTAX  INTEGER (1..65535)
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The port number of the port for which this entry
		contains Source Route management information."
	::= { cndot1dSrPortEntry 1 }

cndot1dSrPortAREHopCount OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The maximum number of routing descriptors allowed
		in an All Paths Explorer frames."
	::= { cndot1dSrPortEntry 2 }

cndot1dSrPortSTEHopCount OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The maximum number of routing descriptors allowed
		in an Spanning Tree Explorer frames."
	::= { cndot1dSrPortEntry 3 }

cndot1dSrExplorerProxy OBJECT-TYPE
	SYNTAX  EnableIndicator
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Indicates whether the bridge proxies explorer
		packets."
	::= { cndot1dSr 3 }

cndot1dSrBridgeNum OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
	DESCRIPTION
               "A bridge number uniquely identifies a bridge when
                more than one bridge is used to span the same two
                segments.  Current source routing protocols limit
                this value to the range: 0 through 15. A value of
                65535 signifies that no bridge number is assigned
                to this bridge. This bridge number is global to a
                SR bridge group. That is all local segments defined
                to a SR bridge group will use the same bridge number."
	::= { cndot1dSr 4 }

END