#-MIBFILE: cpqhost.mib

CPQHOST-MIB DEFINITIONS ::= BEGIN


DisplayString ::=
	OCTET STRING

PhysAddress ::=
	OCTET STRING

mib-2 OBJECT IDENTIFIER ::= { mgmt 1 }
system OBJECT IDENTIFIER ::= { mib-2 1 }
sysName OBJECT IDENTIFIER ::= { system 5 }
compaq OBJECT IDENTIFIER ::= { enterprises 232 }

cpqHostOs OBJECT IDENTIFIER ::= { compaq 11 }

cpqHoMibRev OBJECT IDENTIFIER ::= { cpqHostOs 1 }

cpqHoComponent OBJECT IDENTIFIER ::= { cpqHostOs 2 }

cpqHoInterface OBJECT IDENTIFIER ::= { cpqHoComponent 1 }

cpqHoInfo OBJECT IDENTIFIER ::= { cpqHoComponent 2 }

cpqHoUtil OBJECT IDENTIFIER ::= { cpqHoComponent 3 }

cpqHoFileSys OBJECT IDENTIFIER ::= { cpqHoComponent 4 }

cpqHoIfPhysMap OBJECT IDENTIFIER ::= { cpqHoComponent 5 }

cpqHoSWRunning OBJECT IDENTIFIER ::= { cpqHoComponent 6 }

cpqHoSwVer OBJECT IDENTIFIER ::= { cpqHoComponent 7 }

cpqHoGeneric OBJECT IDENTIFIER ::= { cpqHoComponent 8 }

cpqHoSwPerf OBJECT IDENTIFIER ::= { cpqHoComponent 9 }

cpqHoSystemStatus OBJECT IDENTIFIER ::= { cpqHoComponent 10 }

cpqHoTrapInfo OBJECT IDENTIFIER ::= { cpqHoComponent 11 }

cpqHoClients OBJECT IDENTIFIER ::= { cpqHoComponent 12 }

cpqHoMemory OBJECT IDENTIFIER ::= { cpqHoComponent 13 }

cpqHoFwVer OBJECT IDENTIFIER ::= { cpqHoComponent 14 }

cpqHoHWInfo OBJECT IDENTIFIER ::= { cpqHoComponent 15 }

cpqPwrThreshold OBJECT IDENTIFIER ::= { cpqHoComponent 16 }

cpqHoOsCommon OBJECT IDENTIFIER ::= { cpqHoInterface 4 }

cpqHoMibRevMajor OBJECT-TYPE
	SYNTAX INTEGER (1..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Major Revision level of the MIB.

A change in the major revision level represents a major change
in the architecture of the MIB.  A change in the major revision
level may indicate a significant change in the information
supported and/or the meaning of the supported information.
Correct interpretation of data may require a MIB document with
the same major revision level."
	::= { cpqHoMibRev 1 }


cpqHoMibRevMinor OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Minor Revision level of the MIB.

A change in the minor revision level may represent some minor
additional support, no changes to any pre-existing information
has occurred."
	::= { cpqHoMibRev 2 }


cpqHoMibCondition OBJECT-TYPE
	SYNTAX INTEGER {
	unknown(1),
	ok(2),
	degraded(3),
	failed(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The overall condition.

This object represents the overall status of the server's host
system represented by this MIB."
	::= { cpqHoMibRev 3 }


cpqHoOsCommonPollFreq OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Insight Agent's polling frequency.

The frequency, in seconds, at which the Insight Agent requests
information from the device driver.  A frequency of zero (0)
indicates that the Insight Agent retrieves the information upon
request of a management station, it does not poll the device
driver at a specific interval.

If the poll frequency is zero (0) all attempts to write to this
object will fail.  If the poll frequency is non-zero,
setting this value will change the polling frequency of the
Insight Agent.  Setting the poll frequency to zero (0) will
always fail.  An agent may choose to fail any request to change
the poll frequency to a value that would severely impact system
performance."
	::= { cpqHoOsCommon 1 }


cpqHoOsCommonModuleTable OBJECT-TYPE
	SYNTAX SEQUENCE OF CpqHoOsCommonModuleEntry
	ACCESS read-only
	STATUS optional
	DESCRIPTION "A table of software modules that provide an interface to the
device this MIB describes."
	::= { cpqHoOsCommon 2 }


cpqHoOsCommonModuleEntry OBJECT-TYPE
	SYNTAX CpqHoOsCommonModuleEntry
	ACCESS read-only
	STATUS optional
	DESCRIPTION "A description of a software module that provides an interface
to the device this MIB describes."
	INDEX { cpqHoOsCommonModuleIndex  }

	::= { cpqHoOsCommonModuleTable 1 }

cpqHoOsCommonModuleEntry ::=
	SEQUENCE {
		cpqHoOsCommonModuleIndex INTEGER,
		cpqHoOsCommonModuleName DisplayString,
		cpqHoOsCommonModuleVersion DisplayString,
		cpqHoOsCommonModuleDate OCTET STRING,
		cpqHoOsCommonModulePurpose DisplayString
		}

cpqHoOsCommonModuleIndex OBJECT-TYPE
	SYNTAX INTEGER (0..255)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "A unique index for this module description."
	::= { cpqHoOsCommonModuleEntry 1 }


cpqHoOsCommonModuleName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The module name."
	::= { cpqHoOsCommonModuleEntry 2 }


cpqHoOsCommonModuleVersion OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..5))
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The module version in XX.YY format.

Where XX is the major version number and YY is the minor version
number.  This field will be null (size 0) string if the agent
cannot provide the module version."
	::= { cpqHoOsCommonModuleEntry 3 }


cpqHoOsCommonModuleDate OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(7))
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The module date.

field  octets  contents                  range
=====  ======  =======                  =====
1      1-2   year                      0..65536
2       3    month                     1..12
3       4    day                       1..31
4       5    hour                      0..23
5       6    minute                    0..59
6       7    second                    0..60
(use 60 for leap-second)


This field will be set to year = 0 if the agent cannot provide
the module date.  The hour, minute, and second field will be set
to zero (0) if they are not relevant.  The year field is set
with the most significant octet first."
	::= { cpqHoOsCommonModuleEntry 4 }


cpqHoOsCommonModulePurpose OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The purpose of the module described in this entry."
	::= { cpqHoOsCommonModuleEntry 5 }


cpqHoName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The name of the host operating system (OS)."
	::= { cpqHoInfo 1 }


cpqHoVersion OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The version of the host OS."
	::= { cpqHoInfo 2 }


cpqHoDesc OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A further description of the host OS."
	::= { cpqHoInfo 3 }


cpqHoOsType OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	netware(2),
	windowsnt(3),
	sco-unix(4),
	unixware(5),
	os-2(6),
	ms-dos(7),
	dos-windows(8),
	windows95(9),
	windows98(10),
	open-vms(11),
	nsk(12),
	windowsCE(13),
	linux(14),
	windows2000(15),
	tru64UNIX(16),
	windows2003(17),
	windows2003-x64(18),
	solaris(19),
	windows2003-ia64(20),
	windows2008(21),
	windows2008-x64(22),
	windows2008-ia64(23)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Host Operating system enumeration."
	::= { cpqHoInfo 4 }


cpqHoTelnet OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	available(2),
	notavailable(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Telnet on socket 23 is available."
	::= { cpqHoInfo 5 }


cpqHoSystemRole OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..64))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The system role.

This is a settable free form text field intended to be assigned
by a remote console briefly describing the system's function."
	::= { cpqHoInfo 6 }


cpqHoSystemRoleDetail OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..512))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The system detailed description.

This is a settable free form text field intended to be assigned
by a remote console describing the system function in detail."
	::= { cpqHoInfo 7 }


cpqHoCrashDumpState OBJECT-TYPE
	SYNTAX INTEGER {
	completememorydump(1),
	kernelmemorydump(2),
	smallmemorydump(3),
	none(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Crash dump state.
Value of 'Unknown (-1)' is returned when crash dump state could 
not be determined."
	::= { cpqHoInfo 8 }


cpqHoCrashDumpCondition OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	degraded(3),
	failed(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The condition of the Crash dump configuration."
	::= { cpqHoInfo 9 }


cpqHoCrashDumpMonitoring OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS obsolete
	DESCRIPTION "Enable/disable crash dump monitoring.
If crash dump monitoring is enabled both crash dump TRAP's
are generated and crash dump condition is updated.
If crash dump monitoring is disabled, no crash dump TRAP
is generated and the crash dump condition is set to 
other"
	::= { cpqHoInfo 10 }


cpqHoMaxLogicalCPUSupported OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS obsolete
	DESCRIPTION "Maximum number of logical CPUs supported by Operating System."
	::= { cpqHoInfo 11 }


cpqHoSystemName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Full computer name of the host"
	::= { cpqHoInfo 12 }


cpqHoCpuUtilTable OBJECT-TYPE
	SYNTAX SEQUENCE OF CpqHoCpuUtilEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table of CPU utilization entries."
	::= { cpqHoUtil 1 }


cpqHoCpuUtilEntry OBJECT-TYPE
	SYNTAX CpqHoCpuUtilEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A description of a CPU's utilization."
	INDEX { cpqHoCpuUtilUnitIndex  }

	::= { cpqHoCpuUtilTable 1 }

cpqHoCpuUtilEntry ::=
	SEQUENCE {
		cpqHoCpuUtilUnitIndex INTEGER,
		cpqHoCpuUtilMin INTEGER,
		cpqHoCpuUtilFiveMin INTEGER,
		cpqHoCpuUtilThirtyMin INTEGER,
		cpqHoCpuUtilHour INTEGER,
		cpqHoCpuUtilHwLocation DisplayString
		}

cpqHoCpuUtilUnitIndex OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This number uniquely specifies a processor unit.

A processing unit may be a set of processing chips that are
on the same board or for other reasons work together as a unit.
The main processor unit (if such a concept is valid for this
machine) will always have the lowest (first) index."
	::= { cpqHoCpuUtilEntry 1 }


cpqHoCpuUtilMin OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The CPU utilization as a percentage of the theoretical
maximum during the last minute.  A value of -1 indicates
that no CPU utilization information is available for this
processor."
	::= { cpqHoCpuUtilEntry 2 }


cpqHoCpuUtilFiveMin OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The CPU utilization as a percentage of the theoretical
maximum during the last five minutes.  A value of -1 indicates
that no CPU utilization information is available for this
processor."
	::= { cpqHoCpuUtilEntry 3 }


cpqHoCpuUtilThirtyMin OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The CPU utilization as a percentage of the theoretical
maximum during the last thirty minutes.  A value of -1 indicates
that no CPU utilization information is available for this
processor."
	::= { cpqHoCpuUtilEntry 4 }


cpqHoCpuUtilHour OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The CPU utilization as a percentage of the theoretical
maximum during the last hour.  A value of -1 indicates
that no CPU utilization information is available for this
processor."
	::= { cpqHoCpuUtilEntry 5 }


cpqHoCpuUtilHwLocation OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS obsolete
	DESCRIPTION "A text description of the hardware location, on complex
multi SBB hardware only, for the CPU.
A NULL string indicates that the hardware location could not
be determined or is irrelevant."
	::= { cpqHoCpuUtilEntry 6 }


cpqHoFileSysTable OBJECT-TYPE
	SYNTAX SEQUENCE OF CpqHoFileSysEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table of file system descriptions."
	::= { cpqHoFileSys 1 }


cpqHoFileSysEntry OBJECT-TYPE
	SYNTAX CpqHoFileSysEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A file system description."
	INDEX { cpqHoFileSysIndex  }

	::= { cpqHoFileSysTable 1 }

cpqHoFileSysEntry ::=
	SEQUENCE {
		cpqHoFileSysIndex INTEGER,
		cpqHoFileSysDesc DisplayString,
		cpqHoFileSysSpaceTotal INTEGER,
		cpqHoFileSysSpaceUsed INTEGER,
		cpqHoFileSysPercentSpaceUsed INTEGER,
		cpqHoFileSysAllocUnitsTotal INTEGER,
		cpqHoFileSysAllocUnitsUsed INTEGER,
		cpqHoFileSysStatus INTEGER,
		cpqHoFileSysShortDesc DisplayString
		}

cpqHoFileSysIndex OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index that uniquely specifies this entry."
	::= { cpqHoFileSysEntry 1 }


cpqHoFileSysDesc OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A description of the file system include the GUID."
	::= { cpqHoFileSysEntry 2 }


cpqHoFileSysSpaceTotal OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The file system size in megabytes.

This item will be set to -1 if the agent is unable to determine
this information."
	::= { cpqHoFileSysEntry 3 }


cpqHoFileSysSpaceUsed OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The megabytes of file system space currently in use.

This item will be set to -1 if the agent is unable to determine
this information."
	::= { cpqHoFileSysEntry 4 }


cpqHoFileSysPercentSpaceUsed OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The percent of file system space currently in use.
This item will be set to -1 if this information is not
available."
	::= { cpqHoFileSysEntry 5 }


cpqHoFileSysAllocUnitsTotal OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total number of files (directory entries) that can be
stored on the file system if a limit exists other than
total space used.  This item will be set to -1 if no such
limit exists."
	::= { cpqHoFileSysEntry 6 }


cpqHoFileSysAllocUnitsUsed OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of files (directory entries) on this file system.
This item will be set to -1 if the agent does not determine this
information."
	::= { cpqHoFileSysEntry 7 }


cpqHoFileSysStatus OBJECT-TYPE
	SYNTAX INTEGER {
	unknown(1),
	ok(2),
	degraded(3),
	failed(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Threshold Status.

This object represent the status of the Filesystem threshold."
	::= { cpqHoFileSysEntry 8 }


cpqHoFileSysShortDesc OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A description of the file system."
	::= { cpqHoFileSysEntry 9 }


cpqHoFileSysCondition OBJECT-TYPE
	SYNTAX INTEGER {
	unknown(1),
	ok(2),
	degraded(3),
	failed(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The overall condition of File System Threshold.

This object represents the overall status of the server's 
File System Threshold."
	::= { cpqHoFileSys 2 }


cpqHoIfPhysMapTable OBJECT-TYPE
	SYNTAX SEQUENCE OF CpqHoIfPhysMapEntry
	ACCESS read-only
	STATUS optional
	DESCRIPTION "A table of interface to physical hardware mappings."
	::= { cpqHoIfPhysMap 1 }


cpqHoIfPhysMapEntry OBJECT-TYPE
	SYNTAX CpqHoIfPhysMapEntry
	ACCESS read-only
	STATUS optional
	DESCRIPTION "A mapping of an interface table entry to physical hardware."
	INDEX { cpqHoIfPhysMapIndex  }

	::= { cpqHoIfPhysMapTable 1 }

cpqHoIfPhysMapEntry ::=
	SEQUENCE {
		cpqHoIfPhysMapIndex INTEGER,
		cpqHoIfPhysMapSlot INTEGER,
		cpqHoIfPhysMapIoBaseAddr INTEGER,
		cpqHoIfPhysMapIrq INTEGER,
		cpqHoIfPhysMapDma INTEGER,
		cpqHoIfPhysMapMemBaseAddr INTEGER,
		cpqHoIfPhysMapPort INTEGER,
		cpqHoIfPhysMapDuplexState INTEGER,
		cpqHoIfPhysMapCondition INTEGER
		}

cpqHoIfPhysMapIndex OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "An index that uniquely specifies this entry.  This value is
equal to the index of the entry in the MIB-II interface table
to which this entry corresponds."
	::= { cpqHoIfPhysMapEntry 1 }


cpqHoIfPhysMapSlot OBJECT-TYPE
	SYNTAX INTEGER (0..255)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The number of the slot containing the physical hardware that
implements this interface.  The number zero (0) indicates an
embedded interface (on the system board) or an interface whose
slot is unknown.  Values may be unknown if the physical
hardware has not been configured using the EISA Configuration
Utility."
	::= { cpqHoIfPhysMapEntry 2 }


cpqHoIfPhysMapIoBaseAddr OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The base I/O address of the physical hardware that implements
this interface."
	::= { cpqHoIfPhysMapEntry 3 }


cpqHoIfPhysMapIrq OBJECT-TYPE
	SYNTAX INTEGER (0..255)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The number of the IRQ (interrupt) used for this physical
hardware interface.  The number zero (0) indicates that this
device does not use an IRQ or this information is unavailable."
	::= { cpqHoIfPhysMapEntry 4 }


cpqHoIfPhysMapDma OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The number of the DMA channel used for this physical hardware
interface.  The number -1 indicates that this device does not
use a DMA channel or this information is unavailable."
	::= { cpqHoIfPhysMapEntry 5 }


cpqHoIfPhysMapMemBaseAddr OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The base memory address used by this physical hardware
interface.  The number zero (0) indicates that this device does
not use system memory or this information is unavailable."
	::= { cpqHoIfPhysMapEntry 6 }


cpqHoIfPhysMapPort OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The port number of the interface for multi-port NICs.
A port number of -1 indicates that the port could not
be determined."
	::= { cpqHoIfPhysMapEntry 7 }


cpqHoIfPhysMapDuplexState OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	half(2),
	full(3)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "This variable describes the configured duplex state of the NIC."
	::= { cpqHoIfPhysMapEntry 8 }


cpqHoIfPhysMapCondition OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	degraded(3),
	failed(4)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The condition of this interface."
	::= { cpqHoIfPhysMapEntry 9 }


cpqHoIfPhysMapOverallCondition OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	degraded(3),
	failed(4)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The overall condition of all interfaces."
	::= { cpqHoIfPhysMap 2 }


cpqHoSWRunningTable OBJECT-TYPE
	SYNTAX SEQUENCE OF CpqHoSWRunningEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table of descriptions of software running on the system."
	::= { cpqHoSWRunning 1 }


cpqHoSWRunningEntry OBJECT-TYPE
	SYNTAX CpqHoSWRunningEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A description of a software program running on the system."
	INDEX { cpqHoSWRunningIndex  }

	::= { cpqHoSWRunningTable 1 }

cpqHoSWRunningEntry ::=
	SEQUENCE {
		cpqHoSWRunningIndex INTEGER,
		cpqHoSWRunningName DisplayString,
		cpqHoSWRunningDesc DisplayString,
		cpqHoSWRunningVersion DisplayString,
		cpqHoSWRunningDate OCTET STRING,
		cpqHoSWRunningMonitor INTEGER,
		cpqHoSWRunningState INTEGER,
		cpqHoSWRunningCount INTEGER,
		cpqHoSWRunningCountMin INTEGER,
		cpqHoSWRunningCountMax INTEGER,
		cpqHoSWRunningEventTime OCTET STRING,
		cpqHoSWRunningStatus INTEGER,
		cpqHoSWRunningConfigStatus INTEGER,
		cpqHoSWRunningIdentifier DisplayString,
		cpqHoSWRunningRedundancyMode INTEGER
		}

cpqHoSWRunningIndex OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index that uniquely specifies this entry."
	::= { cpqHoSWRunningEntry 1 }


cpqHoSWRunningName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The name of the software."
	::= { cpqHoSWRunningEntry 2 }


cpqHoSWRunningDesc OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A description of the software."
	::= { cpqHoSWRunningEntry 3 }


cpqHoSWRunningVersion OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The version of the software.

This field will be a null (size 0) string if the agent cannot
provide the software version."
	::= { cpqHoSWRunningEntry 4 }


cpqHoSWRunningDate OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(7))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The software date.

field  octets  contents                  range
=====  ======  =======                  =====
1      1-2   year                      0..65536
2       3    month                     1..12
3       4    day                       1..31
4       5    hour                      0..23
5       6    minute                    0..59
6       7    second                    0..60
(use 60 for leap-second)


This field will be set to year = 0 if the agent cannot provide
the software date.  The hour, minute, and second field will be
set to zero (0) if they are not relevant."
	::= { cpqHoSWRunningEntry 5 }


cpqHoSWRunningMonitor OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	start(2),
	stop(3),
	startAndStop(4),
	count(5),
	startAndCount(6),
	countAndStop(7),
	startCountAndStop(8)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The user specified monitor option for a process."
	::= { cpqHoSWRunningEntry 6 }


cpqHoSWRunningState OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	started(2),
	stopped(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current state of monitored process."
	::= { cpqHoSWRunningEntry 7 }


cpqHoSWRunningCount OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS obsolete
	DESCRIPTION "For each process name, the number of instances of the process running on the system is
kept count of, in this variable."
	::= { cpqHoSWRunningEntry 8 }


cpqHoSWRunningCountMin OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS obsolete
	DESCRIPTION "This is the lower threshold on cpqHoSWRunningCount to be set by the user."
	::= { cpqHoSWRunningEntry 9 }


cpqHoSWRunningCountMax OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS obsolete
	DESCRIPTION "This is the upper threshold on cpqHoSWRunningCount to be set by the user."
	::= { cpqHoSWRunningEntry 10 }


cpqHoSWRunningEventTime OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(7))
	ACCESS read-only
	STATUS obsolete
	DESCRIPTION "The system time at which the monitored event, as per cpqHoSWRunningMonitor, last occurred.

field  octets  contents                  range
=====  ======  ========                  =====
1      1-2   year                      0..65536
2       3    month                     1..12
3       4    day                       1..31
4       5    hour                      0..23
5       6    minute                    0..59
6       7    second                    0..60
(use 60 for leap-second)

The hour, minute, and second field will be set to zero (0) if they are not relevant."
	::= { cpqHoSWRunningEntry 11 }


cpqHoSWRunningStatus OBJECT-TYPE
	SYNTAX INTEGER {
	unknown(1),
	normal(2),
	warning(3),
	minor(4),
	major(5),
	critical(6),
	disabled(7)
	}
	ACCESS read-only
	STATUS obsolete
	DESCRIPTION "The overall alarm state of the resources managed by the software, or the software itself."
	::= { cpqHoSWRunningEntry 12 }


cpqHoSWRunningConfigStatus OBJECT-TYPE
	SYNTAX INTEGER {
	unknown(1),
	starting(2),
	initialized(3),
	configured(4),
	operational(5)
	}
	ACCESS read-only
	STATUS obsolete
	DESCRIPTION "The configuration state of the software.  The level of initialization the software has performed."
	::= { cpqHoSWRunningEntry 13 }


cpqHoSWRunningIdentifier OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS obsolete
	DESCRIPTION "The unique identifier of the sofware.  This identifier should be unique for all instances of the sofware running in the environment."
	::= { cpqHoSWRunningEntry 14 }


cpqHoSWRunningRedundancyMode OBJECT-TYPE
	SYNTAX INTEGER {
	unknown(1),
	master(2),
	backup(3),
	slave(4)
	}
	ACCESS read-only
	STATUS obsolete
	DESCRIPTION "When the software is running in a high availability mode, the failover mode of this instance of the software."
	::= { cpqHoSWRunningEntry 15 }


cpqHoSwRunningTrapDesc OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The error message for a process monitor event."
	::= { cpqHoSWRunning 2 }


cpqHoSwVerNextIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The index of the next available entry in the cpqHoSwVer
table.  If the maximum number of entries to the cpqHoSwVer
table has been reached, this index will contain -1."
	::= { cpqHoSwVer 1 }


cpqHoSwVerTable OBJECT-TYPE
	SYNTAX SEQUENCE OF CpqHoSwVerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of software item entries."
	::= { cpqHoSwVer 2 }


cpqHoSwVerEntry OBJECT-TYPE
	SYNTAX CpqHoSwVerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of software items that are on the machine."
	INDEX { cpqHoSwVerIndex  }

	::= { cpqHoSwVerTable 1 }

cpqHoSwVerEntry ::=
	SEQUENCE {
		cpqHoSwVerIndex INTEGER,
		cpqHoSwVerStatus INTEGER,
		cpqHoSwVerType INTEGER,
		cpqHoSwVerName DisplayString,
		cpqHoSwVerDescription DisplayString,
		cpqHoSwVerDate OCTET STRING,
		cpqHoSwVerLocation DisplayString,
		cpqHoSwVerVersion DisplayString,
		cpqHoSwVerVersionBinary DisplayString
		}

cpqHoSwVerIndex OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index that uniquely identifies an entry in the
cpqHoSwVer table."
	::= { cpqHoSwVerEntry 1 }


cpqHoSwVerStatus OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	loaded(2),
	notloaded(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Status for the software item."
	::= { cpqHoSwVerEntry 2 }


cpqHoSwVerType OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	driver(2),
	agent(3),
	sysutil(4),
	application(5),
	keyfile(6)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Type of software item."
	::= { cpqHoSwVerEntry 3 }


cpqHoSwVerName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..127))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The name of this software item."
	::= { cpqHoSwVerEntry 4 }


cpqHoSwVerDescription OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..127))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The description of this software item."
	::= { cpqHoSwVerEntry 5 }


cpqHoSwVerDate OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(7))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The date of the software item, if any.

field  octets  contents                  range
=====  ======  =======                  =====
1      1-2   year                      0..65535
2       3    month                     1..12
3       4    day                       1..31
4       5    hour                      0..23
5       6    minute                    0..59
6       7    second                    0..60
(use 60 for leap-second)

The year field is set with the most significant octet first.

An entry of zero (0) means that there is no date associated with
this software item.  Zero is the default."
	::= { cpqHoSwVerEntry 6 }


cpqHoSwVerLocation OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The location of this software item on the server."
	::= { cpqHoSwVerEntry 7 }


cpqHoSwVerVersion OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..50))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An string that specifies the version of this item."
	::= { cpqHoSwVerEntry 8 }


cpqHoSwVerVersionBinary OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..50))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An string that specifies the version of this item based on
the binary version resource."
	::= { cpqHoSwVerEntry 9 }


cpqHoSwVerAgentsVer OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..50))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A string that specifies the version of the Insight
Management Agents running on the system."
	::= { cpqHoSwVer 3 }


cpqHoGenericData OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..254))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Data for the generic trap."
	::= { cpqHoGeneric 1 }


cpqHoCriticalSoftwareUpdateData OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..512))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Data for the Critical Software Update trap."
	::= { cpqHoGeneric 2 }


cpqHoSwPerfAppErrorDesc OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..254))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION " This string holds error information about the last application
error that occurred in the system. "
	::= { cpqHoSwPerf 1 }


cpqHoMibStatusArray OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(4..256))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The MIB Status Array is an array of MIB status structures. Each
structure is made up of 4 octets.  The first octet is the MIB
presence.  The second octet is MIB condition.  The third octet is
MIB major revision.  The fourth octet is MIB minor revision. These
blocks of 4 octets each are index by the mib identifier just after
the compaq enterprise (eg in 1.3.6.1.232.11 mib, the index is 11).
The 4 octets in the first block (block 0) are reserved for systems
management and serve as an aggregate of the other mibs.

Array element 0 is the status for all MIBs in the Compaq
Enterprise.  Array element n, where n > 0, is the status for the
nth MIB in the Compaq Enterprise (.1.3.6.1.4.1.232.n).

Octet   Element   Field
======== ======= =========
0        0    Status of any Compaq MIBs
1             Condition of all Compaq MIBs
2             System Flags (see below)
3             Detailed type (see below)
4        1    Status of Compaq MIB 1
5             Condition of Compaq MIB 1
6             Major Revision of Compaq MIB 1
7             Minor Revision of Compaq MIB 1
8        2    Status of Compaq MIB 2
9             Condition of Compaq MIB 2
10             Major Revision of Compaq MIB 2
11             Minor Revision of Compaq MIB 2
.        .
.
.
n*4        n    Status of Compaq MIB n
(n*4)+1          Condition of Compaq MIB n
(n*4)+2          Major Revision of Compaq MIB n
(n*4)+3          Minor Revision of Compaq MIB n

System Flags (octet 2)
Bit        Meaning
=====       =========
0         Equals 1 if the device is not a server, see detailed type below
Equals 0 if the device is a server
1         This system contains enabled remote console
functionality.
2         This system is configured to be an Integration Server.
3         Web Based Management is enabled.
4-7        Reserved (reserved Bits should be zero)

Detailed Type (octet 3)
Bits 0-4    Detailed Type, only used if bit 0 in octet 2 is 1.
Bits 5-7    Reserved for expansion. note, use these last in case we
need more then 32 types someday.

Type Values for Bits 0-4 (maps to CIM7 types)
Unknown                    =  0
Server                     =  1  (yes a duplicate of the server flag)
Desktop                    =  2
Workstation                =  3
Portable                   =  4
Router                     =  5
Cluster                    =  6
Printer                    =  7
Switch                     =  8  (network switch)
Repeater                   =  9
Remote Access Device       = 10
Other                      = 11
Management Processor       = 12  (rib, RILOE, iLo)
Rack                       = 13
Enclosure                  = 14
KVM Switch                 = 15  (IP enabled keyboard video mouse switch).
UPS                        = 16
Power Distribution Unit    = 17
Environmental Monitor      = 18  (eg CMC)
Power Distribution Rack    = 19  (PDR)
Storage Device             = 20

For all other blocks, they are defined as:
Status         This is a collection of flags.  Each bit has the
following meaning when it is on (1):

Bit 2-7:   RESERVED: Always 0
Bit 1:     MIB is from offline data (only applies
to global system status)
Bit 0:     MIB is available

NOTE:   bit 7 is the most significant bit, bit 0
is the least significant.

Condition      0 - Not available
1 - Other
2 - OK
3 - Degraded
4 - Failed

Major Revision 0..255, where 0 is not available
Minor Revision 0..255, where 0 is not available"
	::= { cpqHoSystemStatus 1 }


cpqHoConfigChangedDate OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(7))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The date/time when the agents were last loaded.

field  octets  contents                  range
=====  ======  =======                  =====
1      1-2   year                      0..65536
2       3    month                     1..12
3       4    day                       1..31
4       5    hour                      0..23
5       6    minute                    0..59
6       7    second                    0..60
(use 60 for leap-second)


This field will be set to year = 0 if the agent cannot provide
the date/time.  The year field is set with the most significant
octet first."
	::= { cpqHoSystemStatus 2 }


cpqHoGUID OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(16..17))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The globally unique identifier of this physical server.
If the OS cannot determine a unique ID, it will default the
variable to contain all 0's.  The management station can then
perform a SET to this variable to provide the unique ID.
When the system is cellular, it will have its partition number
appended at the end."
	::= { cpqHoSystemStatus 3 }


cpqHoCodeServer OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This item indicates how many code server shares are currently
configured on the system.  If the value of this attribute is
0, this server has not been configured with code server shares."
	::= { cpqHoSystemStatus 4 }


cpqHoWebMgmtPort OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This item indicates the port used by the Insight Web Agent.
If the port cannot be determined or the Web Management agent
is not enabled, this value will be -1."
	::= { cpqHoSystemStatus 5 }


cpqHoGUIDCanonical OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(32..36))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The globally unique identifier in canonical format of this 
physical server. If the OS cannot determine a unique ID, it will 
default the variable to blank."
	::= { cpqHoSystemStatus 6 }


cpqHoTrapFlags OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Trap Flags.


This is a collection of flags used during trap delivery.
Each bit has the following meaning:

Bit 5-31: RESERVED: Always 0.
Bit 2-4: Trap Condition
0 = Not used (for backward compatibility)
1 = Condition unknown or N/A
2 = Condition ok
3 = Condition degraded
4 = Condition failed
5-7 = reserved
Bit 1:    Client IP address type
0 = static entry
1 = DHCP entry
Bit 0:    Agent Type
0 = Server
1 = Client

NOTE:   bit 31 is the most significant bit, bit 0 is the least
significant."
	::= { cpqHoTrapInfo 1 }


cpqHoClientLastModified OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(7))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The date/time of the last modification to the client table.

field  octets  contents                  range
=====  ======  =======                  =====
1      1-2   year                      0..65536
2       3    month                     1..12
3       4    day                       1..31
4       5    hour                      0..23
5       6    minute                    0..59
6       7    second                    0..60
(use 60 for leap-second)


This field will be set to all 0's if there are no entries to the
client table.

The year field will be set to 0xFFFF if the agent does not support
the client table.

The year field is set with the most significant octet first."
	::= { cpqHoClients 1 }


cpqHoClientDelete OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..15))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Setting this variable to the name of a client in the client table
will cause that row in the table to be deleted.  Any other set
will fail.

Note that the indices of the table will (most likely) be renumbered
following a deletion."
	::= { cpqHoClients 2 }


cpqHoClientTable OBJECT-TYPE
	SYNTAX SEQUENCE OF CpqHoClientEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table of client descriptions."
	::= { cpqHoClients 3 }


cpqHoClientEntry OBJECT-TYPE
	SYNTAX CpqHoClientEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A client description."
	INDEX { cpqHoClientIndex  }

	::= { cpqHoClientTable 1 }

cpqHoClientEntry ::=
	SEQUENCE {
		cpqHoClientIndex INTEGER,
		cpqHoClientName DisplayString,
		cpqHoClientIpxAddress OCTET STRING,
		cpqHoClientIpAddress IpAddress,
		cpqHoClientCommunity DisplayString,
		cpqHoClientID OCTET STRING
		}

cpqHoClientIndex OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index that uniquely specifies this entry."
	::= { cpqHoClientEntry 1 }


cpqHoClientName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..15))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Win95 machine name of this client."
	::= { cpqHoClientEntry 2 }


cpqHoClientIpxAddress OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(20))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IPX address for this client, all octets should be set to
0xff if this machine does not support IPX.

The format is NetAddr:NodeNumber and sent in MSB order:

1111111111
01234567:890123456789"
	::= { cpqHoClientEntry 3 }


cpqHoClientIpAddress OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP address for this client, all octets should be set to
0xff if this machine does not support IP.  The order will be
in network byte order (ie MSB first.)"
	::= { cpqHoClientEntry 4 }


cpqHoClientCommunity OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..48))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A community name that can be used to query the client with SNMP.
This community name should have, but is not required to have,
the greatest possible access to client information."
	::= { cpqHoClientEntry 5 }


cpqHoClientID OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(16))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The unique identifier of this client."
	::= { cpqHoClientEntry 6 }


cpqHoPhysicalMemorySize OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Total amount of physical memory as seen by the OS (in megabytes).

A -1 will be returned if this value could not be determined."
	::= { cpqHoMemory 1 }


cpqHoPhysicalMemoryFree OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The amount of free physical memory (in megabytes).

A -1 will be returned if this value could not be determined."
	::= { cpqHoMemory 2 }


cpqHoPagingMemorySize OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Total virtual memory available from the OS (in megabytes).

A -1 will be returned if this value could not be determined."
	::= { cpqHoMemory 3 }


cpqHoPagingMemoryFree OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Available paging memory (in megabytes).

A -1 will be returned if this value could not be determined."
	::= { cpqHoMemory 4 }


cpqHoBootPagingFileSize OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..10))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The paging file size of the boot volume in the format xxxMB or 
xxxGB, where xxx is the paging file size in that unit shown right 
after it.

NULL value will be returned if this value could not be determined."
	::= { cpqHoMemory 5 }


cpqHoBootPagingFileMinimumSize OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..10))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Minimum paging file size of the boot volume required to save the 
memory dump in the event of a system crash. The format is xxxMB or 
xxxGB, where xxx is the minimum paging file size in that unit shown 
right after it."
	::= { cpqHoMemory 6 }


cpqHoBootPagingFileVolumeFreeSpace OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..10))
	ACCESS read-only
	STATUS obsolete
	DESCRIPTION "Free space of the boot volume required to save the memory dump in the 
event of a system crash. The format is xxxMB or xxxGB, where xxx is
the minimum paging file size in that unit shown right after it."
	::= { cpqHoMemory 7 }


cpqHoFwVerTable OBJECT-TYPE
	SYNTAX SEQUENCE OF CpqHoFwVerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of firmware item entries."
	::= { cpqHoFwVer 1 }


cpqHoFwVerEntry OBJECT-TYPE
	SYNTAX CpqHoFwVerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of firmware items that are on the machine."
	INDEX { cpqHoFwVerIndex  }

	::= { cpqHoFwVerTable 1 }

cpqHoFwVerEntry ::=
	SEQUENCE {
		cpqHoFwVerIndex INTEGER,
		cpqHoFwVerCategory INTEGER,
		cpqHoFwVerDeviceType INTEGER,
		cpqHoFwVerDisplayName DisplayString,
		cpqHoFwVerVersion DisplayString,
		cpqHoFwVerLocation DisplayString,
		cpqHoFwVerXmlString DisplayString,
		cpqHoFwVerKeyString DisplayString,
		cpqHoFwVerUpdateMethod INTEGER
		}

cpqHoFwVerIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Firmware Version Index.

The firmware version index uniquely identifies an entry in the
cpqHoFwVer table."
	::= { cpqHoFwVerEntry 1 }


cpqHoFwVerCategory OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	storage(2),
	nic(3),
	rib(4),
	system(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Firmware Version Category."
	::= { cpqHoFwVerEntry 2 }


cpqHoFwVerDeviceType OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	internalArrayController(2),
	fibreArrayController(3),
	scsiController(4),
	fibreChannelTapeController(5),
	modularDataRouter(6),
	ideCdRomDrive(7),
	ideDiskDrive(8),
	scsiCdRom-ScsiAttached(9),
	scsiDiskDrive-ScsiAttached(10),
	scsiTapeDrive-ScsiAttached(11),
	scsiTapeLibrary-ScsiAttached(12),
	scsiDiskDrive-ArrayAttached(13),
	scsiTapeDrive-ArrayAttached(14),
	scsiTapeLibrary-ArrayAttached(15),
	scsiDiskDrive-FibreAttached(16),
	scsiTapeDrive-FibreAttached(17),
	scsiTapeLibrary-FibreAttached(18),
	scsiEnclosureBackplaneRom-ScsiAttached(19),
	scsiEnclosureBackplaneRom-ArrayAttached(20),
	scsiEnclosureBackplaneRom-FibreAttached(21),
	scsiEnclosureBackplaneRom-ra4x00(22),
	systemRom(23),
	networkInterfaceController(24),
	remoteInsightBoard(25)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Firmware Version Device Type."
	::= { cpqHoFwVerEntry 3 }


cpqHoFwVerDisplayName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..127))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Firmware Version Device Display Name.

This is the display name of the device containing the firmware."
	::= { cpqHoFwVerEntry 4 }


cpqHoFwVerVersion OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..31))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Firmware Version.

This is the version of the device firmware."
	::= { cpqHoFwVerEntry 5 }


cpqHoFwVerLocation OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Firmware Version Device Location.

This is a printable string that specifies the location of the
device that contains the firmware."
	::= { cpqHoFwVerEntry 6 }


cpqHoFwVerXmlString OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Firmware Version Xml String.

This is an XML string that specifies the location of the device
that contains the firmware.
This will be NULL string (size 0) if this information could not
be provided."
	::= { cpqHoFwVerEntry 7 }


cpqHoFwVerKeyString OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..127))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Firmware Version Key String.

This field is differentiate devices of the same type."
	::= { cpqHoFwVerEntry 8 }


cpqHoFwVerUpdateMethod OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	noUpdate(2),
	softwareflash(3),
	replacePhysicalRom(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Firmware Version update method."
	::= { cpqHoFwVerEntry 9 }


cpqHoHWInfoPlatform OBJECT-TYPE
	SYNTAX INTEGER {
	unknown(1),
	cellular(2),
	foundation(3),
	virtualMachine(4),
	serverBlade(5)
	}
	ACCESS read-only
	STATUS obsolete
	DESCRIPTION "Hardware platform type.

This object represents the platform type of the server's host
system represented by this MIB."
	::= { cpqHoHWInfo 1 }


cpqPwrWarnType OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..254))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Type of power reading on which the warning is based."
	::= { cpqPwrThreshold 1 }


cpqPwrWarnThreshold OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The threshold the power usage must exceed (in Watts)."
	::= { cpqPwrThreshold 2 }


cpqPwrWarnDuration OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Duration that power usage must be exceeded before warning (in minutes)."
	::= { cpqPwrThreshold 3 }


cpqSerialNum OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..254))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Serial number of the server."
	::= { cpqPwrThreshold 4 }


cpqServerUUID OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..254))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Server UUID"
	::= { cpqPwrThreshold 5 }


cpqHoGenericTrap TRAP-TYPE
	ENTERPRISE compaq
      VARIABLES { cpqHoGenericData }
      --#SUMMARY "%s"
      --#ARGUMENTS {0}
      --#SEVERITY MAJOR
      --#TIMEINDEX 99
      --#TYPE "Generic trap (11001)"
      --#ENABLE true
      --#CATEGORY "Proliant Miscellaneous Events"
DESCRIPTION "Generic trap."
      ::= 11001


cpqHoAppErrorTrap TRAP-TYPE
	 ENTERPRISE compaq
      VARIABLES { cpqHoSwPerfAppErrorDesc }
      --#SUMMARY "%s"
      --#ARGUMENTS {0}
      --#SEVERITY MAJOR
      --#TIMEINDEX 99
      --#MSG_FORMATTER "$V1V#Error Message: #"
      --#TYPE "Application Error Trap (11002)"
      --#ENABLE true
      --#CATEGORY "Proliant Application Events"
DESCRIPTION "An application has generated an exception.  Specific error information is contained in the variable cpqHoSwPerfAppErrorDesc."
      ::= 11002


cpqHo2GenericTrap TRAP-TYPE
	ENTERPRISE compaq
      VARIABLES { sysName, cpqHoTrapFlags, cpqHoGenericData }
      --#SUMMARY "%s"
      --#ARGUMENTS {2}
      --#SEVERITY MAJOR
      --#TIMEINDEX 99
      --#MSG_FORMATTER "$V3V#Text: #"
      --#TYPE "Generic trap (11003)"
      --#ENABLE true
      --#CATEGORY "Proliant Miscellaneous Events"
DESCRIPTION "Generic trap."
      ::= 11003


cpqHo2AppErrorTrap TRAP-TYPE
	 ENTERPRISE compaq
      VARIABLES { sysName, cpqHoTrapFlags, cpqHoSwPerfAppErrorDesc }
      --#SUMMARY "%s"
      --#ARGUMENTS {2}
      --#SEVERITY MAJOR
      --#TIMEINDEX 99
      --#MSG_FORMATTER "$V3V#Error Message: #"
      --#TYPE "Application Error Trap (11004)"
      --#ENABLE true
      --#CATEGORY "Proliant Application Events"
DESCRIPTION "An application has generated an exception.  Specific error information is contained in the variable cpqHoSwPerfAppErrorDesc."
      ::= 11004



cpqHo2NicStatusOk TRAP-TYPE
	ENTERPRISE compaq
      VARIABLES { sysName, cpqHoTrapFlags, cpqHoIfPhysMapSlot }
      --#SUMMARY "NIC Status is OK for slot %s."
      --#ARGUMENTS {2}
      --#SEVERITY MAJOR
      --#TIMEINDEX 99
      --#MSG_FORMATTER "$V3V#NIC Slot: # $V4V#NIC Port Number: #"
      --#TYPE "Status Trap (11005)"
      --#ENABLE true
      --#CATEGORY "Proliant NIC Events"
DESCRIPTION "This trap will be sent any time the status of a NIC changes to the OK condition."
      ::= 11005


cpqHo2NicStatusFailed TRAP-TYPE
	ENTERPRISE compaq
      VARIABLES { sysName, cpqHoTrapFlags, cpqHoIfPhysMapSlot }
      --#SUMMARY "NIC Status is Failed for slot %s."
      --#ARGUMENTS {2}
      --#SEVERITY MAJOR
      --#TIMEINDEX 99
      --#MSG_FORMATTER "$V3V#NIC Slot: #"
      --#TYPE "Status Trap (11006)"
      --#ENABLE true
      --#CATEGORY "Proliant NIC Events"
DESCRIPTION "This trap will be sent any time the status of a NIC changes to the Failed condition."
      ::= 11006


cpqHo2NicSwitchoverOccurred TRAP-TYPE
	ENTERPRISE compaq
      VARIABLES { sysName, cpqHoTrapFlags, cpqHoIfPhysMapSlot, cpqHoIfPhysMapSlot }
      --#SUMMARY "NIC switchover to slot %s from slot %s."
      --#ARGUMENTS {2,3}
      --#SEVERITY MAJOR
      --#TIMEINDEX 99
      --#MSG_FORMATTER "$V3V#Current Active NIC Slot: # $V4V#Previous Active NIC Slot: #"
      --#TYPE "Status Trap (11007)"
      --#ENABLE true
      --#CATEGORY "Proliant NIC Events"
DESCRIPTION "This trap will be sent any time the configured redundant NIC becomes the active NIC."
      ::= 11007


cpqHo2NicStatusOk2 TRAP-TYPE
	ENTERPRISE compaq
      VARIABLES { sysName, cpqHoTrapFlags, cpqHoIfPhysMapSlot, cpqHoIfPhysMapPort }
      --#SUMMARY "NIC Status is OK for slot %s, port %s."
      --#ARGUMENTS {2,3}
      --#SEVERITY MAJOR
      --#TIMEINDEX 99
      --#TYPE "Status Trap (11008)"
      --#ENABLE true
      --#CATEGORY "Proliant NIC Events"
DESCRIPTION "This trap will be sent any time the status of a NIC changes to the OK condition."
      ::= 11008


cpqHo2NicStatusFailed2 TRAP-TYPE
	 ENTERPRISE compaq
      VARIABLES { sysName, cpqHoTrapFlags, cpqHoIfPhysMapSlot, cpqHoIfPhysMapPort }
      --#SUMMARY "NIC Status is Failed for slot %s, port %s."
      --#ARGUMENTS {2,3}
      --#SEVERITY MAJOR
      --#TIMEINDEX 99
      --#MSG_FORMATTER "$V3V#NIC Slot: # $V4V#NIC Port Number: #"
      --#TYPE "Status Trap (11009)"
      --#ENABLE true
      --#CATEGORY "Proliant NIC Events"
DESCRIPTION "This trap will be sent any time the status of a NIC changes to the Failed condition."
      ::= 11009


cpqHo2NicSwitchoverOccurred2 TRAP-TYPE
	ENTERPRISE compaq
      VARIABLES { sysName, cpqHoTrapFlags, cpqHoIfPhysMapSlot, cpqHoIfPhysMapPort, cpqHoIfPhysMapSlot, cpqHoIfPhysMapPort }
      --#SUMMARY "NIC switchover to slot %s, port %s from slot %s, port %s."
      --#ARGUMENTS {2,3,4,5}
      --#SEVERITY MAJOR
      --#TIMEINDEX 99
      --#MSG_FORMATTER "$V3V#Current Active NIC Slot: # $V4V#Current Active NIC Port: # $V5V#Previous Active NIC Slot: # $V6V#Previous Active NIC Port: #"
      --#TYPE "Status Trap (11010)"
      --#ENABLE true
      --#CATEGORY "Proliant NIC Events"
DESCRIPTION "This trap will be sent any time the configured redundant NIC becomes the active NIC."
      ::= 11010


cpqHoProcessEventTrap TRAP-TYPE
	ENTERPRISE compaq
      VARIABLES { sysName, cpqHoTrapFlags, cpqHoSwRunningTrapDesc }
      --#SUMMARY "%s"
      --#ARGUMENTS {2}
      --#SEVERITY MAJOR
      --#TIMEINDEX 99
      --#MSG_FORMATTER "$V3V#Error Message: #"
      --#TYPE "Process Monitor Event Trap (11011)"
      --#ENABLE true
      --#CATEGORY "Proliant Application Events"
DESCRIPTION "A monitored process has either started or stopped running."
      ::= 11011


cpqHoProcessCountWarning TRAP-TYPE
	ENTERPRISE compaq
      VARIABLES { sysName, cpqHoTrapFlags, cpqHoSWRunningName, cpqHoSWRunningCount, cpqHoSWRunningCountMin, cpqHoSWRunningCountMax, cpqHoSWRunningEventTime }
      --#SUMMARY "Process %s has count %s which violates the thresholds %s to %s."
      --#ARGUMENTS {2,3,4,5}
      --#SEVERITY MAJOR
      --#TIMEINDEX 99
      --#STATE DEGRADED
      --#MSG_FORMATTER "$V3V#Name: # $V4V#Count: # $V5V#Min: # $V6V#Max: # $V7V#Time: #"
      --#TYPE "Process Count Event Trap (11012)"
      --#ENABLE true
      --#CATEGORY "Proliant Application Events"
DESCRIPTION "A monitored process count has violated the thresholds set on cpqHoSWRunningCount"
      ::= 11012

cpqHoProcessCountNormal TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { sysName, cpqHoTrapFlags, cpqHoSWRunningName, cpqHoSWRunningCount, cpqHoSWRunningCountMin, cpqHoSWRunningCountMax, cpqHoSWRunningEventTime }

	--#SUMMARY "Process %s has count %s which respects the thresholds %s to %s."
	--#ARGUMENTS {2, 3, 4, 5}
	--#SEVERITY INFORMATIONAL
	--#TIMEINDEX 99
	--#STATE OPERATIONAL
        --#MSG_FORMATTER "$V3V#Name: # $V4V#Count: # $V5V#Min: # $V6V#Max: # $V7V#Time: #"
        --#TYPE "Process Monitor Event Trap (11013)"
        --#ENABLE true
        --#CATEGORY "Proliant Application Events"
DESCRIPTION "A monitored process count has returned back to normal."
	::= 11013


cpqHoCriticalSoftwareUpdateTrap TRAP-TYPE
	 ENTERPRISE compaq
      VARIABLES { sysName, cpqHoTrapFlags, cpqHoCriticalSoftwareUpdateData }
      --#SUMMARY "%s"
      --#ARGUMENTS {2}
      --#SEVERITY CRITICAL
      --#TIMEINDEX 99
      --#MSG_FORMATTER "$V3V#NIC Slot: # $V3V#Update Data: #"
      --#TYPE "Critical Software update Notification Trap (11014)"
      --#ENABLE true
      --#CATEGORY "Proliant NIC Events"
DESCRIPTION "This trap is a send to the user to notify him of a Critical Software Update."
      ::= 11014


cpqHoCrashDumpNotEnabledTrap TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { sysName, cpqHoTrapFlags, cpqHoCrashDumpState }

	--#SUMMARY "Crash Dump is not enabled."
	--#ARGUMENTS {}
	--#SEVERITY WARNING
	--#TIMEINDEX 99
        --#MSG_FORMATTER "$V3V#Crash Dump State: #"
	--#TYPE "Crash Dump not enabled Notification Trap (11015)"
        --#ENABLE true
        --#CATEGORY "Proliant Application Events"
DESCRIPTION "This trap is sent to the user to notify him that the Crash Dump is not enabled.
This trap is not sent if cpqHoCrashDumpMonitoring is disabled."
	::= 11015



cpqHoBootPagingFileTooSmallTrap TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { sysName, cpqHoTrapFlags, cpqHoCrashDumpState, cpqHoBootPagingFileSize, cpqHoBootPagingFileMinimumSize }

	--#SUMMARY "The paging file size of the boot volume (%s) or the target volume of the memory dump file is not large enough to hold a crash dump in the event of a system crash (%s)."
	--#ARGUMENTS {3, 4}
	--#SEVERITY WARNING
	--#TIMEINDEX 99
        --#MSG_FORMATTER "$V3V#Crash Dump State: # $V4V#Boot Paging Filesize: # $V5V#Boot Paging File Minimumsize: #"
	--#TYPE "Boot Paging File Or Memory Dump Target Volume Too Small Notification Trap (11016)"
        --#CATEGORY "Proliant Application Events"

DESCRIPTION "This trap is sent when the paging file size of the boot volume or the target volume of the memory dump file is too small to hold a crash dump.
This trap is not sent if cpqHoCrashDumpMonitoring is disabled."
	::= 11016


cpqHoSWRunningStatusChangeTrap TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { sysName, cpqHoTrapFlags, cpqHoSWRunningName, cpqHoSWRunningDesc, cpqHoSwRunningTrapDesc, cpqHoSWRunningVersion, cpqHoSWRunningStatus, cpqHoSWRunningConfigStatus, cpqHoSWRunningIdentifier, cpqHoSWRunningRedundancyMode }

	--#SUMMARY "Software status change for %s, description = %s, id = %s"
	--#ARGUMENTS {2, 4, 8}
	--#SEVERITY WARNING
	--#TIMEINDEX 99
        --#MSG_FORMATTER "$V3V#SW Running name: # $V4V#SW Running Description: # $V5V#SW Running Trap Description: # $V6V#SW Running Version: # $V7V#SW Running Config Status: # $V8V#SW Running Identifier: # $V9V#SW Running Redundancy Mode: #"
	--#TYPE "Software status change Notification Trap (11017)"
        --#CATEGORY "Proliant Application Events"
DESCRIPTION "This trap notifies the user that the running software has changed status, configuration status, or redundancy mode."
	::= 11017


cpqHo2PowerThresholdTrap TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { sysName, cpqHoTrapFlags, cpqPwrWarnType, cpqPwrWarnThreshold, cpqPwrWarnDuration, cpqSerialNum, cpqServerUUID }

	--#SUMMARY "%s"
	--#ARGUMENTS {6}
	--#SEVERITY MINOR
	--#TIMEINDEX 99
        --#MSG_FORMATTER "$V3V#Power Warning Type: # $V4V#Power Warning Threshold: # $V5V#Power Warning Duration: # $V6V#Serial Number: # $V7V#Server UUID: #"
	--#TYPE "Power Threshold Exceeded (11018)"
        --#CATEGORY "Proliant Application Events"
        --#RULE_HANDLER "com.hp.mx.core.protocol.snmp.trap.components.PwrThresholdRuleHandler"	
DESCRIPTION "Power threshold exceeded."
	::= 11018


cpqHoBootPagingFileOrFreeSpaceTooSmallTrap TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { sysName, cpqHoTrapFlags, cpqHoCrashDumpState, cpqHoBootPagingFileSize, cpqHoBootPagingFileVolumeFreeSpace, cpqHoBootPagingFileMinimumSize }

	--#TYPE "Boot Paging File Or Memory Dump Target Volume Too Small Notification Trap (11016)"

	--#SUMMARY "The paging file size of the boot volume (%s) or the free space of the memory dump target volume (%s) is not large enough to hold a crash dump in the event of a system crash (%s)."

	--#ARGUMENTS {3, 4, 5}

	--#SEVERITY WARNING

	--#TIMEINDEX 99
	--#MSG_FORMATTER "$V3V#CrashDumpState: # $V4V#BootPagingFileSize: # $V5V#BootPagingFileVolumeFreeSpace: # $V6V#BootPagingFileMinimumSize: #"
DESCRIPTION "This trap is sent when the paging file size of the boot volume or the free space of memory dump target volume is too small to hold a crash dump."
	::= 11019


END