#-MIBFILE: bladetype2-physical.mib BLADETYPE2-PHYSICAL-MIB DEFINITIONS ::= BEGIN DisplayString ::= OCTET STRING (SIZE(0..255)) PhysAddress ::= OCTET STRING MacAddress ::= OCTET STRING (SIZE(6)) TruthValue ::= INTEGER { true(1), false(2) } TestAndIncr ::= INTEGER (0..2147483647) AutonomousType ::= OBJECT IDENTIFIER InstancePointer ::= OBJECT IDENTIFIER VariablePointer ::= OBJECT IDENTIFIER RowPointer ::= OBJECT IDENTIFIER RowStatus ::= INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } TimeStamp ::= TimeTicks TimeInterval ::= INTEGER (0..2147483647) DateAndTime ::= OCTET STRING (SIZE(8|11)) StorageType ::= INTEGER { other(1), volatile(2), nonVolatile(3), permanent(4), readOnly(5) } TDomain ::= OBJECT IDENTIFIER TAddress ::= OCTET STRING (SIZE(1..255)) BridgeId ::= OCTET STRING (SIZE(8)) Timeout ::= INTEGER hp OBJECT IDENTIFIER ::= { enterprises 11 } nm OBJECT IDENTIFIER ::= { hp 2 } hpSystem OBJECT IDENTIFIER ::= { nm 3 } netElement OBJECT IDENTIFIER ::= { hpSystem 7 } hpEtherSwitch OBJECT IDENTIFIER ::= { netElement 11 } hpSwitchProliant OBJECT IDENTIFIER ::= { hpEtherSwitch 33 } hpSwitchModuleBladetype2 OBJECT IDENTIFIER ::= { hpSwitchProliant 1 } hpSwitchBladeType2-Mgmt OBJECT IDENTIFIER ::= { hpSwitchModuleBladetype2 2 } layer2 OBJECT IDENTIFIER ::= { hpSwitchBladeType2-Mgmt 2 } layer2Configs OBJECT IDENTIFIER ::= { layer2 1 } layer2Stats OBJECT IDENTIFIER ::= { layer2 2 } layer2Info OBJECT IDENTIFIER ::= { layer2 3 } layer2Oper OBJECT IDENTIFIER ::= { layer2 4 } vlan OBJECT IDENTIFIER ::= { layer2Configs 1 } trunkgroup OBJECT IDENTIFIER ::= { layer2Configs 2 } stgCfg OBJECT IDENTIFIER ::= { layer2Configs 3 } mirroring OBJECT IDENTIFIER ::= { layer2Configs 4 } mstCfg OBJECT IDENTIFIER ::= { layer2Configs 5 } lacp OBJECT IDENTIFIER ::= { layer2Configs 6 } thash OBJECT IDENTIFIER ::= { layer2Configs 7 } l2GeneralCfg OBJECT IDENTIFIER ::= { layer2Configs 8 } ufd OBJECT IDENTIFIER ::= { layer2Configs 9 } dot1x OBJECT IDENTIFIER ::= { layer2Configs 11 } fdb OBJECT IDENTIFIER ::= { layer2Configs 12 } hotlinksCfg OBJECT IDENTIFIER ::= { layer2Configs 14 } hotlinksCurCfgOnState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Hot Links ON/OFF setting." ::= { hotlinksCfg 1 } hotlinksNewCfgOnState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Hot Links ON/OFF settings." ::= { hotlinksCfg 2 } hotlinksCurCfgFdbUpdateState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable/disable Hot Links FDB Update setting." ::= { hotlinksCfg 3 } hotlinksNewCfgFdbUpdateState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable/disable Hot Links FDB Update setting." ::= { hotlinksCfg 4 } hotlinksMaxTriggerEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of entries in the Hot Links Trigger Table." ::= { hotlinksCfg 5 } hotlinksCurCfgTriggerTable OBJECT-TYPE SYNTAX SEQUENCE OF HotlinksCurCfgTriggerTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The Hot Links Trigger Table." ::= { hotlinksCfg 6 } hotlinksCurCfgTriggerTableEntry OBJECT-TYPE SYNTAX HotlinksCurCfgTriggerTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "A row in the Hot Links Trigger Table." INDEX { hotlinksCurCfgTriggerId } ::= { hotlinksCurCfgTriggerTable 1 } hotlinksCurCfgTriggerTableEntry ::= SEQUENCE { hotlinksCurCfgTriggerId Integer32, hotlinksCurCfgTriggerState INTEGER, hotlinksCurCfgTriggerPreemptState INTEGER, hotlinksCurCfgTriggerFdelay Integer32, hotlinksCurCfgTriggerMasterPort Integer32, hotlinksCurCfgTriggerMasterTrunk Integer32, hotlinksCurCfgTriggerBackupPort Integer32, hotlinksCurCfgTriggerBackupTrunk Integer32 } hotlinksCurCfgTriggerId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Trigger identifier." ::= { hotlinksCurCfgTriggerTableEntry 1 } hotlinksCurCfgTriggerState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable/disable Trigger state." ::= { hotlinksCurCfgTriggerTableEntry 2 } hotlinksCurCfgTriggerPreemptState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable/disable Preemption state." ::= { hotlinksCurCfgTriggerTableEntry 3 } hotlinksCurCfgTriggerFdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Forward Delay setting (in secs)." ::= { hotlinksCurCfgTriggerTableEntry 4 } hotlinksCurCfgTriggerMasterPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The master interface port number." ::= { hotlinksCurCfgTriggerTableEntry 5 } hotlinksCurCfgTriggerMasterTrunk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The master interface trunk number." ::= { hotlinksCurCfgTriggerTableEntry 6 } hotlinksCurCfgTriggerBackupPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The backup interface port number." ::= { hotlinksCurCfgTriggerTableEntry 7 } hotlinksCurCfgTriggerBackupTrunk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The backup interface trunk number." ::= { hotlinksCurCfgTriggerTableEntry 8 } hotlinksNewCfgTriggerTable OBJECT-TYPE SYNTAX SEQUENCE OF HotlinksNewCfgTriggerTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The Hot Links Trigger Table." ::= { hotlinksCfg 7 } hotlinksNewCfgTriggerTableEntry OBJECT-TYPE SYNTAX HotlinksNewCfgTriggerTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "A row in the Hot Links Trigger Table." INDEX { hotlinksNewCfgTriggerId } ::= { hotlinksNewCfgTriggerTable 1 } hotlinksNewCfgTriggerTableEntry ::= SEQUENCE { hotlinksNewCfgTriggerId Integer32, hotlinksNewCfgTriggerState INTEGER, hotlinksNewCfgTriggerPreemptState INTEGER, hotlinksNewCfgTriggerFdelay Integer32, hotlinksNewCfgTriggerMasterPort Integer32, hotlinksNewCfgTriggerMasterTrunk Integer32, hotlinksNewCfgTriggerBackupPort Integer32, hotlinksNewCfgTriggerBackupTrunk Integer32 } hotlinksNewCfgTriggerId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Trigger identifier." ::= { hotlinksNewCfgTriggerTableEntry 1 } hotlinksNewCfgTriggerState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable/disable Trigger state." ::= { hotlinksNewCfgTriggerTableEntry 2 } hotlinksNewCfgTriggerPreemptState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable/disable Preemption state." ::= { hotlinksNewCfgTriggerTableEntry 3 } hotlinksNewCfgTriggerFdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Forward Delay setting (in secs)." ::= { hotlinksNewCfgTriggerTableEntry 4 } hotlinksNewCfgTriggerMasterPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The master interface port number." ::= { hotlinksNewCfgTriggerTableEntry 5 } hotlinksNewCfgTriggerMasterTrunk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The master interface trunk number." ::= { hotlinksNewCfgTriggerTableEntry 6 } hotlinksNewCfgTriggerBackupPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The backup interface port number." ::= { hotlinksNewCfgTriggerTableEntry 7 } hotlinksNewCfgTriggerBackupTrunk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The backup interface trunk number." ::= { hotlinksNewCfgTriggerTableEntry 8 } thashL2 OBJECT IDENTIFIER ::= { thash 1 } mirrPortMirr OBJECT IDENTIFIER ::= { mirroring 1 } mstGeneralCfg OBJECT IDENTIFIER ::= { mstCfg 1 } mstCistCfg OBJECT IDENTIFIER ::= { mstCfg 2 } ufdGeneralCfg OBJECT IDENTIFIER ::= { ufd 1 } fdbGeneralCfg OBJECT IDENTIFIER ::= { fdb 1 } dot1xCurCfgGlobalTable OBJECT IDENTIFIER ::= { dot1x 5 } dot1xNewCfgGlobalTable OBJECT IDENTIFIER ::= { dot1x 6 } fdbStats OBJECT IDENTIFIER ::= { layer2Stats 1 } stpStats OBJECT IDENTIFIER ::= { layer2Stats 2 } lacpStats OBJECT IDENTIFIER ::= { layer2Stats 3 } ufdStats OBJECT IDENTIFIER ::= { layer2Stats 4 } hotlinksStats OBJECT IDENTIFIER ::= { layer2Stats 6 } hotlinksStatsTriggerTable OBJECT-TYPE SYNTAX SEQUENCE OF HotlinksStatsTriggerTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The Hot Links Trigger Table Stats." ::= { hotlinksStats 1 } hotlinksStatsTriggerTableEntry OBJECT-TYPE SYNTAX HotlinksStatsTriggerTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "A row in the Hot Links Trigger Table Stats." INDEX { hotlinksStatsTriggerId } ::= { hotlinksStatsTriggerTable 1 } hotlinksStatsTriggerTableEntry ::= SEQUENCE { hotlinksStatsTriggerId Integer32, hotlinksStatsTriggerMasterActive Integer32, hotlinksStatsTriggerBackupActive Integer32, hotlinksStatsTriggerFdbUpdate Integer32, hotlinksStatsTriggerFdbFailed Integer32 } hotlinksStatsTriggerId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Trigger identifier." ::= { hotlinksStatsTriggerTableEntry 1 } hotlinksStatsTriggerMasterActive OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the master interface was set to active." ::= { hotlinksStatsTriggerTableEntry 2 } hotlinksStatsTriggerBackupActive OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the backup interface was set to active." ::= { hotlinksStatsTriggerTableEntry 3 } hotlinksStatsTriggerFdbUpdate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of times an FDB update was performed." ::= { hotlinksStatsTriggerTableEntry 4 } hotlinksStatsTriggerFdbFailed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of times an FDB update failed." ::= { hotlinksStatsTriggerTableEntry 5 } cistInfo OBJECT IDENTIFIER ::= { layer2Info 1 } fdbInfo OBJECT IDENTIFIER ::= { layer2Info 2 } stpInfo OBJECT IDENTIFIER ::= { layer2Info 3 } lacpInfo OBJECT IDENTIFIER ::= { layer2Info 4 } dot1xInfo OBJECT IDENTIFIER ::= { layer2Info 5 } dot1pInfo OBJECT IDENTIFIER ::= { layer2Info 6 } genInfo OBJECT IDENTIFIER ::= { layer2Info 7 } vlanInfo OBJECT IDENTIFIER ::= { layer2Info 8 } trunkGroupInfo OBJECT IDENTIFIER ::= { layer2Info 9 } hotlinksInfo OBJECT IDENTIFIER ::= { layer2Info 10 } hotlinksInfoOnState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Hot Links ON/OFF setting info." ::= { hotlinksInfo 1 } hotlinksInfoFdbUpdateState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable/disable Hot Links FDB Update setting info." ::= { hotlinksInfo 2 } hotlinksInfoTriggerTable OBJECT-TYPE SYNTAX SEQUENCE OF HotlinksInfoTriggerTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The Hot Links Trigger Table Info." ::= { hotlinksInfo 3 } hotlinksInfoTriggerTableEntry OBJECT-TYPE SYNTAX HotlinksInfoTriggerTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "A row in the Hot Links Trigger Table Info." INDEX { hotlinksInfoTriggerId } ::= { hotlinksInfoTriggerTable 1 } hotlinksInfoTriggerTableEntry ::= SEQUENCE { hotlinksInfoTriggerId Integer32, hotlinksInfoTriggerState INTEGER, hotlinksInfoTriggerPreemptState INTEGER, hotlinksInfoTriggerFdelay Integer32, hotlinksInfoTriggerActive DisplayString } hotlinksInfoTriggerId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Trigger identifier." ::= { hotlinksInfoTriggerTableEntry 1 } hotlinksInfoTriggerState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable/disable Trigger state info." ::= { hotlinksInfoTriggerTableEntry 2 } hotlinksInfoTriggerPreemptState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable/disable Preemption state info." ::= { hotlinksInfoTriggerTableEntry 3 } hotlinksInfoTriggerFdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Forward Delay setting info (in secs)." ::= { hotlinksInfoTriggerTableEntry 4 } hotlinksInfoTriggerActive OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A textual string containing the active interface info." ::= { hotlinksInfoTriggerTableEntry 5 } dot1xSystemInfo OBJECT IDENTIFIER ::= { dot1xInfo 2 } cistGeneralInfo OBJECT IDENTIFIER ::= { cistInfo 1 } vlanMaxEnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of rows in the VLAN configuration table." ::= { vlan 1 } vlanCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanCurCfgTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of VLAN configuration." ::= { vlan 2 } vlanCurCfgTableEntry OBJECT-TYPE SYNTAX VlanCurCfgTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "A row in the VLAN configuration table." INDEX { vlanCurCfgVlanId } ::= { vlanCurCfgTable 1 } vlanCurCfgTableEntry ::= SEQUENCE { vlanCurCfgVlanId Integer32, vlanCurCfgVlanName DisplayString, vlanCurCfgPorts OCTET STRING, vlanCurCfgState INTEGER, vlanCurCfgStg Integer32 } vlanCurCfgVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The VLAN identifier." ::= { vlanCurCfgTableEntry 1 } vlanCurCfgVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The VLAN name." ::= { vlanCurCfgTableEntry 2 } vlanCurCfgPorts OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN" ::= { vlanCurCfgTableEntry 3 } vlanCurCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable a VLAN" ::= { vlanCurCfgTableEntry 4 } vlanCurCfgStg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Spanning Tree Group for the VLAN." ::= { vlanCurCfgTableEntry 6 } vlanNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanNewCfgTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of VLAN configuration." ::= { vlan 3 } vlanNewCfgTableEntry OBJECT-TYPE SYNTAX VlanNewCfgTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "A row in the VLAN configuration table." INDEX { vlanNewCfgVlanId } ::= { vlanNewCfgTable 1 } vlanNewCfgTableEntry ::= SEQUENCE { vlanNewCfgVlanId Integer32, vlanNewCfgVlanName DisplayString, vlanNewCfgPorts OCTET STRING, vlanNewCfgState INTEGER, vlanNewCfgAddPort Integer32, vlanNewCfgRemovePort Integer32, vlanNewCfgDelete INTEGER, vlanNewCfgStg Integer32 } vlanNewCfgVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The VLAN identifier." ::= { vlanNewCfgTableEntry 1 } vlanNewCfgVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The VLAN name." ::= { vlanNewCfgTableEntry 2 } vlanNewCfgPorts OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN" ::= { vlanNewCfgTableEntry 3 } vlanNewCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable a VLAN" ::= { vlanNewCfgTableEntry 4 } vlanNewCfgAddPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port to be added to the specified VLAN. A '0' value is returned when read." ::= { vlanNewCfgTableEntry 5 } vlanNewCfgRemovePort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port to be removed from the specified VLAN. A '0' value is returned when read." ::= { vlanNewCfgTableEntry 6 } vlanNewCfgDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN" ::= { vlanNewCfgTableEntry 7 } vlanNewCfgStg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Spanning Tree Group for the VLAN." ::= { vlanNewCfgTableEntry 9 } trunkGroupTableMaxSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of entries in trunk group table." ::= { trunkgroup 1 } trunkGroupCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF TrunkGroupCurCfgTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of trunk group configuration." ::= { trunkgroup 2 } trunkGroupCurCfgTableEntry OBJECT-TYPE SYNTAX TrunkGroupCurCfgTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "A row in the trunk group configuration table." INDEX { trunkGroupCurCfgIndex } ::= { trunkGroupCurCfgTable 1 } trunkGroupCurCfgTableEntry ::= SEQUENCE { trunkGroupCurCfgIndex Integer32, trunkGroupCurCfgPorts OCTET STRING, trunkGroupCurCfgState INTEGER } trunkGroupCurCfgIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of the trunk group." ::= { trunkGroupCurCfgTableEntry 1 } trunkGroupCurCfgPorts OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group" ::= { trunkGroupCurCfgTableEntry 2 } trunkGroupCurCfgState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable a trunk group." ::= { trunkGroupCurCfgTableEntry 3 } trunkGroupNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF TrunkGroupNewCfgTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of trunk group configuration." ::= { trunkgroup 3 } trunkGroupNewCfgTableEntry OBJECT-TYPE SYNTAX TrunkGroupNewCfgTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "A row in the trunk group configuration table." INDEX { trunkGroupNewCfgIndex } ::= { trunkGroupNewCfgTable 1 } trunkGroupNewCfgTableEntry ::= SEQUENCE { trunkGroupNewCfgIndex Integer32, trunkGroupNewCfgPorts OCTET STRING, trunkGroupNewCfgAddPort Integer32, trunkGroupNewCfgRemovePort Integer32, trunkGroupNewCfgState INTEGER, trunkGroupNewCfgDelete INTEGER } trunkGroupNewCfgIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of the trunk group." ::= { trunkGroupNewCfgTableEntry 1 } trunkGroupNewCfgPorts OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group" ::= { trunkGroupNewCfgTableEntry 2 } trunkGroupNewCfgAddPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port to be added in the trunk group. When read, 0 is returned." ::= { trunkGroupNewCfgTableEntry 3 } trunkGroupNewCfgRemovePort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port to be deleted from the trunk group. when read, 0 is returned." ::= { trunkGroupNewCfgTableEntry 4 } trunkGroupNewCfgState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable a trunk group." ::= { trunkGroupNewCfgTableEntry 5 } trunkGroupNewCfgDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Setting the value to delete(2) will delete the entire row. When read, other(1) is returned." ::= { trunkGroupNewCfgTableEntry 6 } l2ThashCurCfgSmacState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable smac hash." ::= { thashL2 1 } l2ThashNewCfgSmacState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable smac hash." ::= { thashL2 2 } l2ThashCurCfgDmacState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable dmac hash." ::= { thashL2 3 } l2ThashNewCfgDmacState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable dmac hash." ::= { thashL2 4 } l2ThashCurCfgSipState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable sip hash." ::= { thashL2 5 } l2ThashNewCfgSipState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable sip hash." ::= { thashL2 6 } l2ThashCurCfgDipState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable dip hash." ::= { thashL2 7 } l2ThashNewCfgDipState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable dip hash." ::= { thashL2 8 } stgCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF StgCurCfgTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of Spanning Tree Group configuration." ::= { stgCfg 1 } stgCurCfgTableEntry OBJECT-TYPE SYNTAX StgCurCfgTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "Information about a particular Spanning Tree Group configuration." INDEX { stgCurCfgIndex } ::= { stgCurCfgTable 1 } stgCurCfgTableEntry ::= SEQUENCE { stgCurCfgIndex Integer32, stgCurCfgState INTEGER, stgCurCfgVlanBmap1 OCTET STRING, stgCurCfgVlanBmap2 OCTET STRING, stgCurCfgPriority INTEGER, stgCurCfgBrgHelloTime INTEGER, stgCurCfgBrgForwardDelay INTEGER, stgCurCfgBrgMaxAge INTEGER, stgCurCfgAgingTime INTEGER, stgCurCfgVlanBmap OCTET STRING } stgCurCfgIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB." ::= { stgCurCfgTableEntry 1 } stgCurCfgState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Turn on of off Spanning Tree operation of a particular Spanning Tree Group." ::= { stgCurCfgTableEntry 2 } stgCurCfgVlanBmap1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) ACCESS read-only STATUS obsolete DESCRIPTION "The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 2048. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree" ::= { stgCurCfgTableEntry 3 } stgCurCfgVlanBmap2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) ACCESS read-only STATUS obsolete DESCRIPTION "The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 2049 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 2057 || || || ||___ vlan 2056 || |____ vlan 2055 || . . . ||_________ vlan 2050 |__________ vlan 2049 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree" ::= { stgCurCfgTableEntry 4 } stgCurCfgPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID." ::= { stgCurCfgTableEntry 5 } stgCurCfgBrgHelloTime OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-only STATUS mandatory DESCRIPTION "The value in seconds that all bridges use for HelloTime when this bridge is acting as the root." ::= { stgCurCfgTableEntry 6 } stgCurCfgBrgForwardDelay OBJECT-TYPE SYNTAX INTEGER (4..30) ACCESS read-only STATUS mandatory DESCRIPTION "The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root." ::= { stgCurCfgTableEntry 7 } stgCurCfgBrgMaxAge OBJECT-TYPE SYNTAX INTEGER (6..40) ACCESS read-only STATUS mandatory DESCRIPTION "The value in seconds that all bridges use for MaxAge when this bridge is acting as the root." ::= { stgCurCfgTableEntry 8 } stgCurCfgAgingTime OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The timeout period in seconds for aging out dynamically learned forwarding information." ::= { stgCurCfgTableEntry 9 } stgCurCfgVlanBmap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..512)) ACCESS read-only STATUS mandatory DESCRIPTION "The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4095. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree" ::= { stgCurCfgTableEntry 10 } stgNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF StgNewCfgTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of Spanning Tree Groups configuration in the new_config." ::= { stgCfg 2 } stgNewCfgTableEntry OBJECT-TYPE SYNTAX StgNewCfgTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "Information about a particular Spanning Tree Group configuration." INDEX { stgNewCfgIndex } ::= { stgNewCfgTable 1 } stgNewCfgTableEntry ::= SEQUENCE { stgNewCfgIndex Integer32, stgNewCfgState INTEGER, stgNewCfgDefaultCfg INTEGER, stgNewCfgAddVlan Integer32, stgNewCfgRemoveVlan Integer32, stgNewCfgVlanBmap1 OCTET STRING, stgNewCfgVlanBmap2 OCTET STRING, stgNewCfgPriority INTEGER, stgNewCfgBrgHelloTime INTEGER, stgNewCfgBrgForwardDelay INTEGER, stgNewCfgBrgMaxAge INTEGER, stgNewCfgAgingTime INTEGER, stgNewCfgVlanBmap OCTET STRING } stgNewCfgIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB." ::= { stgNewCfgTableEntry 1 } stgNewCfgState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Turn on of off Spanning Tree operation of a particular Spanning Tree Group." ::= { stgNewCfgTableEntry 2 } stgNewCfgDefaultCfg OBJECT-TYPE SYNTAX INTEGER { default-config(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Setting the value to default-config(1) will set the default configuration as recommended by IEEE 802.1D for a particular Spanning Tree Group. default-config (1) is always returned When read, but it does not mean anything." ::= { stgNewCfgTableEntry 3 } stgNewCfgAddVlan OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The vlan to be added to the specified Spanning Tree Group. A '0' value is returned when read." ::= { stgNewCfgTableEntry 4 } stgNewCfgRemoveVlan OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The vlan to be removed from the specified Spanning Tree Group. A '0' value is returned when read." ::= { stgNewCfgTableEntry 5 } stgNewCfgVlanBmap1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) ACCESS read-only STATUS obsolete DESCRIPTION "The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 2048. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree" ::= { stgNewCfgTableEntry 6 } stgNewCfgVlanBmap2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) ACCESS read-only STATUS obsolete DESCRIPTION "The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 2049 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 2057 || || || ||___ vlan 2056 || |____ vlan 2055 || . . . ||_________ vlan 2050 |__________ vlan 2049 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree" ::= { stgNewCfgTableEntry 7 } stgNewCfgPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID." ::= { stgNewCfgTableEntry 8 } stgNewCfgBrgHelloTime OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-only STATUS mandatory DESCRIPTION "The value in seconds that all bridges use for HelloTime when this bridge is acting as the root." ::= { stgNewCfgTableEntry 9 } stgNewCfgBrgForwardDelay OBJECT-TYPE SYNTAX INTEGER (4..30) ACCESS read-only STATUS mandatory DESCRIPTION "The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root." ::= { stgNewCfgTableEntry 10 } stgNewCfgBrgMaxAge OBJECT-TYPE SYNTAX INTEGER (6..40) ACCESS read-only STATUS mandatory DESCRIPTION "The value in seconds that all bridges use for MaxAge when this bridge is acting as the root." ::= { stgNewCfgTableEntry 11 } stgNewCfgAgingTime OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The timeout period in seconds for aging out dynamically learned forwarding information." ::= { stgNewCfgTableEntry 12 } stgNewCfgVlanBmap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..512)) ACCESS read-only STATUS mandatory DESCRIPTION "The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4095. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree" ::= { stgNewCfgTableEntry 13 } stgCurCfgPortTable OBJECT-TYPE SYNTAX SEQUENCE OF StgCurCfgPortTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of Spanning Tree Group port configuration in the current_config." ::= { stgCfg 3 } stgCurCfgPortTableEntry OBJECT-TYPE SYNTAX StgCurCfgPortTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "Information about port configuration of a particular Spanning Tree Group." INDEX { stgCurCfgStgIndex , stgCurCfgPortIndex } ::= { stgCurCfgPortTable 1 } stgCurCfgPortTableEntry ::= SEQUENCE { stgCurCfgStgIndex Integer32, stgCurCfgPortIndex Integer32, stgCurCfgPortState INTEGER, stgCurCfgPortPriority INTEGER, stgCurCfgPortPathCost INTEGER, stgCurCfgPortLink INTEGER, stgCurCfgPortEdge INTEGER, stgCurCfgPortFastFwd INTEGER } stgCurCfgStgIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB." ::= { stgCurCfgPortTableEntry 1 } stgCurCfgPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port identifier of a particular Spanning Tree Group." ::= { stgCurCfgPortTableEntry 2 } stgCurCfgPortState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group." ::= { stgCurCfgPortTableEntry 3 } stgCurCfgPortPriority OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID." ::= { stgCurCfgPortTableEntry 4 } stgCurCfgPortPathCost OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The contribution of this port to the path cost of paths towards the spanning tree root which include this port." ::= { stgCurCfgPortTableEntry 5 } stgCurCfgPortLink OBJECT-TYPE SYNTAX INTEGER { auto(1), p2p(2), shared(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the port link." ::= { stgCurCfgPortTableEntry 6 } stgCurCfgPortEdge OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of port edge." ::= { stgCurCfgPortTableEntry 7 } stgCurCfgPortFastFwd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of port fast forwarding." ::= { stgCurCfgPortTableEntry 8 } stgNewCfgPortTable OBJECT-TYPE SYNTAX SEQUENCE OF StgNewCfgPortTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of Spanning Tree Group port configuration in the new_config." ::= { stgCfg 4 } stgNewCfgPortTableEntry OBJECT-TYPE SYNTAX StgNewCfgPortTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "Information about port configuration of a particular Spanning Tree Group." INDEX { stgNewCfgStgIndex , stgNewCfgPortIndex } ::= { stgNewCfgPortTable 1 } stgNewCfgPortTableEntry ::= SEQUENCE { stgNewCfgStgIndex Integer32, stgNewCfgPortIndex Integer32, stgNewCfgPortState INTEGER, stgNewCfgPortPriority INTEGER, stgNewCfgPortPathCost INTEGER, stgNewCfgPortLink INTEGER, stgNewCfgPortEdge INTEGER, stgNewCfgPortFastFwd INTEGER } stgNewCfgStgIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB." ::= { stgNewCfgPortTableEntry 1 } stgNewCfgPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port identifier of a particular Spanning Tree Group." ::= { stgNewCfgPortTableEntry 2 } stgNewCfgPortState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group." ::= { stgNewCfgPortTableEntry 3 } stgNewCfgPortPriority OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID." ::= { stgNewCfgPortTableEntry 4 } stgNewCfgPortPathCost OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The contribution of this port to the path cost of paths towards the spanning tree root which include this port." ::= { stgNewCfgPortTableEntry 5 } stgNewCfgPortLink OBJECT-TYPE SYNTAX INTEGER { auto(1), p2p(2), shared(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the port link." ::= { stgNewCfgPortTableEntry 6 } stgNewCfgPortEdge OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of port edge." ::= { stgNewCfgPortTableEntry 7 } stgNewCfgPortFastFwd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of port fast forwarding." ::= { stgNewCfgPortTableEntry 8 } mstCurCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable MSTP/RSTP" ::= { mstGeneralCfg 1 } mstNewCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable MSTP/RSTP" ::= { mstGeneralCfg 2 } mstCurCfgRegionName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the Region's configuration." ::= { mstGeneralCfg 3 } mstNewCfgRegionName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the Region's configuration." ::= { mstGeneralCfg 4 } mstCurCfgRegionVersion OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Version of the MST Region." ::= { mstGeneralCfg 5 } mstNewCfgRegionVersion OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Version of the MST Region." ::= { mstGeneralCfg 6 } mstCurCfgMaxHopCount OBJECT-TYPE SYNTAX INTEGER (4..60) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the maximum hop count value." ::= { mstGeneralCfg 7 } mstNewCfgMaxHopCount OBJECT-TYPE SYNTAX INTEGER (4..60) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the maximum hop count value." ::= { mstGeneralCfg 8 } mstCurCfgStpMode OBJECT-TYPE SYNTAX INTEGER { mstp(1), rstp(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The version of Spanning Tree Protocal the bridge is currently running." ::= { mstGeneralCfg 9 } mstNewCfgStpMode OBJECT-TYPE SYNTAX INTEGER { mstp(1), rstp(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The version of Spanning Tree Protocal the bridge is currently running." ::= { mstGeneralCfg 10 } mstCistDefaultCfg OBJECT-TYPE SYNTAX INTEGER { default(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Setting the value to default(1) will set the Multiple Spanning Tree and member parameters to default. default(1) is always returned when read, but it does not mean anything." ::= { mstCistCfg 1 } mstCistBridgeCfg OBJECT IDENTIFIER ::= { mstCistCfg 2 } mstCistCurCfgBridgePriority OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The value of the writable portion of the Brigde Identifier comprising of the first two octets." ::= { mstCistBridgeCfg 1 } mstCistNewCfgBridgePriority OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The value of the writable portion of the Brigde Identifier comprising of the first two octets." ::= { mstCistBridgeCfg 2 } mstCistCurCfgBridgeMaxAge OBJECT-TYPE SYNTAX INTEGER (6..40) ACCESS read-only STATUS mandatory DESCRIPTION "The value in seconds that all bridges use for MaxAge when this bridge is acting as the root." ::= { mstCistBridgeCfg 5 } mstCistNewCfgBridgeMaxAge OBJECT-TYPE SYNTAX INTEGER (6..40) ACCESS read-only STATUS mandatory DESCRIPTION "The value in seconds that all bridges use for MaxAge when this bridge is acting as the root." ::= { mstCistBridgeCfg 6 } mstCistCurCfgBridgeForwardDelay OBJECT-TYPE SYNTAX INTEGER (4..30) ACCESS read-only STATUS mandatory DESCRIPTION "The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root." ::= { mstCistBridgeCfg 7 } mstCistNewCfgBridgeForwardDelay OBJECT-TYPE SYNTAX INTEGER (4..30) ACCESS read-only STATUS mandatory DESCRIPTION "The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root." ::= { mstCistBridgeCfg 8 } mstCistCurCfgVlanBmap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..512)) ACCESS read-only STATUS mandatory DESCRIPTION "The vlans applied to the CIST group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4094. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 where x : 1 - The represented vlan applied to the CIST group. 0 - The represented vlan not applied to the group" ::= { mstCistBridgeCfg 9 } mstCistNewCfgVlanBmap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..512)) ACCESS read-only STATUS mandatory DESCRIPTION "The vlans applied to the CIST group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4094. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 where x : 1 - The represented vlan applied to the CIST group. 0 - The represented vlan not applied to the group" ::= { mstCistBridgeCfg 10 } mstCistNewCfgAddVlan OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The vlan to be added to the CIST Group. A '0' value is returned when read." ::= { mstCistBridgeCfg 11 } mstCistCurCfgPortTable OBJECT-TYPE SYNTAX SEQUENCE OF MstCistCurCfgPortTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of CIST Port configuration." ::= { mstCistCfg 3 } mstCistCurCfgPortTableEntry OBJECT-TYPE SYNTAX MstCistCurCfgPortTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "Information about a particular CIST Port configuration." INDEX { mstCistCurCfgPortIndex } ::= { mstCistCurCfgPortTable 1 } mstCistCurCfgPortTableEntry ::= SEQUENCE { mstCistCurCfgPortIndex Integer32, mstCistCurCfgPortPriority INTEGER, mstCistCurCfgPortPathCost INTEGER, mstCistCurCfgPortLinkType INTEGER, mstCistCurCfgPortEdge INTEGER, mstCistCurCfgPortStpState INTEGER, mstCistCurCfgPortHelloTime INTEGER } mstCistCurCfgPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the port for which this entry contains spanning tree configuration." ::= { mstCistCurCfgPortTableEntry 1 } mstCistCurCfgPortPriority OBJECT-TYPE SYNTAX INTEGER (0..240) ACCESS read-only STATUS mandatory DESCRIPTION "The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value." ::= { mstCistCurCfgPortTableEntry 2 } mstCistCurCfgPortPathCost OBJECT-TYPE SYNTAX INTEGER (0..200000000) ACCESS read-only STATUS mandatory DESCRIPTION "The contribution of this port to the path cost of paths towards the CIST Root which include this port." ::= { mstCistCurCfgPortTableEntry 3 } mstCistCurCfgPortLinkType OBJECT-TYPE SYNTAX INTEGER { auto(1), p2p(2), shared(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port should be treated as having a shared media connection. A value of auto(1) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means." ::= { mstCistCurCfgPortTableEntry 4 } mstCistCurCfgPortEdge OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The value of the Edge Port parameter." ::= { mstCistCurCfgPortTableEntry 5 } mstCistCurCfgPortStpState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Turn port's Spanning Tree on/off." ::= { mstCistCurCfgPortTableEntry 6 } mstCistCurCfgPortHelloTime OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-only STATUS mandatory DESCRIPTION "The amount of time between the transmission of Configuration Port PDUs in seconds." ::= { mstCistCurCfgPortTableEntry 7 } mstCistNewCfgPortTable OBJECT-TYPE SYNTAX SEQUENCE OF MstCistNewCfgPortTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of CIST Port configuration." ::= { mstCistCfg 4 } mstCistNewCfgPortTableEntry OBJECT-TYPE SYNTAX MstCistNewCfgPortTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "Information about a particular CIST Port configuration." INDEX { mstCistNewCfgPortIndex } ::= { mstCistNewCfgPortTable 1 } mstCistNewCfgPortTableEntry ::= SEQUENCE { mstCistNewCfgPortIndex Integer32, mstCistNewCfgPortPriority INTEGER, mstCistNewCfgPortPathCost INTEGER, mstCistNewCfgPortLinkType INTEGER, mstCistNewCfgPortEdge INTEGER, mstCistNewCfgPortStpState INTEGER, mstCistNewCfgPortHelloTime INTEGER } mstCistNewCfgPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the port for which this entry contains spanning tree configuration." ::= { mstCistNewCfgPortTableEntry 1 } mstCistNewCfgPortPriority OBJECT-TYPE SYNTAX INTEGER (0..240) ACCESS read-only STATUS mandatory DESCRIPTION "The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value." ::= { mstCistNewCfgPortTableEntry 2 } mstCistNewCfgPortPathCost OBJECT-TYPE SYNTAX INTEGER (0..200000000) ACCESS read-only STATUS mandatory DESCRIPTION "The contribution of this port to the path cost of paths towards the CIST Root which include this port." ::= { mstCistNewCfgPortTableEntry 3 } mstCistNewCfgPortLinkType OBJECT-TYPE SYNTAX INTEGER { auto(1), p2p(2), shared(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port should be treated as having a shared media connection. A value of auto(1) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means." ::= { mstCistNewCfgPortTableEntry 4 } mstCistNewCfgPortEdge OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The value of the Edge Port parameter." ::= { mstCistNewCfgPortTableEntry 5 } mstCistNewCfgPortStpState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Turn port's Spanning Tree on/off." ::= { mstCistNewCfgPortTableEntry 6 } mstCistNewCfgPortHelloTime OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-only STATUS mandatory DESCRIPTION "The amount of time between the transmission of Configuration Port PDUs in seconds." ::= { mstCistNewCfgPortTableEntry 7 } pmCurCfgPortMirrState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of port-based port mirroring." ::= { mirrPortMirr 1 } pmNewCfgPortMirrState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of port-based port mirroring." ::= { mirrPortMirr 2 } pmCurCfgPortMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF PmCurCfgPortMonitorEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of monitoring ports." ::= { mirrPortMirr 3 } pmCurCfgPortMonitorEntry OBJECT-TYPE SYNTAX PmCurCfgPortMonitorEntry ACCESS read-only STATUS mandatory DESCRIPTION "A row in the monitoring port table." INDEX { pmCurCfgPmirrMoniPortIndex , pmCurCfgPmirrMirrPortIndex } ::= { pmCurCfgPortMonitorTable 1 } pmCurCfgPortMonitorEntry ::= SEQUENCE { pmCurCfgPmirrMoniPortIndex Integer32, pmCurCfgPmirrMirrPortIndex Integer32, pmCurCfgPmirrDirection INTEGER } pmCurCfgPmirrMoniPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The monitoring port number." ::= { pmCurCfgPortMonitorEntry 1 } pmCurCfgPmirrMirrPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The mirrored port number" ::= { pmCurCfgPortMonitorEntry 2 } pmCurCfgPmirrDirection OBJECT-TYPE SYNTAX INTEGER { in(1), out(2), both(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of traffic to be monitored with respect to the mirrored port." ::= { pmCurCfgPortMonitorEntry 3 } pmNewCfgPortMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF PmNewCfgPortMonitorEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of monitoring ports." ::= { mirrPortMirr 4 } pmNewCfgPortMonitorEntry OBJECT-TYPE SYNTAX PmNewCfgPortMonitorEntry ACCESS read-only STATUS mandatory DESCRIPTION "A row in the monitoring port table." INDEX { pmNewCfgPmirrMoniPortIndex , pmNewCfgPmirrMirrPortIndex } ::= { pmNewCfgPortMonitorTable 1 } pmNewCfgPortMonitorEntry ::= SEQUENCE { pmNewCfgPmirrMoniPortIndex Integer32, pmNewCfgPmirrMirrPortIndex Integer32, pmNewCfgPmirrDirection INTEGER, pmNewCfgPmirrDelete INTEGER, pmNewCfgPmonDelete INTEGER } pmNewCfgPmirrMoniPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The monitoring port number." ::= { pmNewCfgPortMonitorEntry 1 } pmNewCfgPmirrMirrPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The mirrored port number" ::= { pmNewCfgPortMonitorEntry 2 } pmNewCfgPmirrDirection OBJECT-TYPE SYNTAX INTEGER { in(1), out(2), both(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of traffic to be monitored with respect to the mirrored port." ::= { pmNewCfgPortMonitorEntry 3 } pmNewCfgPmirrDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Setting the value to delete(2) will delete the entire row. When read, other(1) is returned." ::= { pmNewCfgPortMonitorEntry 4 } pmNewCfgPmonDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Setting the value to delete(2) will delete the monitor port. When read, other(1) is returned." ::= { pmNewCfgPortMonitorEntry 10 } lacpCurSystemPriority OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A 2-octet read-write value indicating the priority value associated with the Actor's System ID." ::= { lacp 1 } lacpNewSystemPriority OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A 2-octet read-write value indicating the priority value associated with the Actor's System ID." ::= { lacp 2 } lacpCurSystemTimeoutTime OBJECT-TYPE SYNTAX INTEGER { short(3), long(90) } ACCESS read-only STATUS mandatory DESCRIPTION "If a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3)." ::= { lacp 5 } lacpNewSystemTimeoutTime OBJECT-TYPE SYNTAX INTEGER { short(3), long(90) } ACCESS read-only STATUS mandatory DESCRIPTION "If a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3)." ::= { lacp 6 } lacpCurPortCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF LacpCurPortCfgTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of LACP port configuration." ::= { lacp 7 } lacpCurPortCfgTableEntry OBJECT-TYPE SYNTAX LacpCurPortCfgTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "A row in the LACP port configuration table." INDEX { lacpCurPortCfgTableId } ::= { lacpCurPortCfgTable 1 } lacpCurPortCfgTableEntry ::= SEQUENCE { lacpCurPortCfgTableId Integer32, lacpCurPortState INTEGER, lacpCurPortActorPortPriority INTEGER, lacpCurPortActorAdminKey INTEGER } lacpCurPortCfgTableId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " LACP port number." ::= { lacpCurPortCfgTableEntry 1 } lacpCurPortState OBJECT-TYPE SYNTAX INTEGER { off(1), active(2), passive(3) } ACCESS read-only STATUS mandatory DESCRIPTION "LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer." ::= { lacpCurPortCfgTableEntry 2 } lacpCurPortActorPortPriority OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The priority value assigned to this Aggregation Port. This 16-bit value is read-only." ::= { lacpCurPortCfgTableEntry 3 } lacpCurPortActorAdminKey OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance." ::= { lacpCurPortCfgTableEntry 4 } lacpNewPortCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF LacpNewPortCfgTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of LACP port configuration." ::= { lacp 8 } lacpNewPortCfgTableEntry OBJECT-TYPE SYNTAX LacpNewPortCfgTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "A row in the LACP port configuration table." INDEX { lacpNewPortCfgTableId } ::= { lacpNewPortCfgTable 1 } lacpNewPortCfgTableEntry ::= SEQUENCE { lacpNewPortCfgTableId Integer32, lacpNewPortState INTEGER, lacpNewPortActorPortPriority INTEGER, lacpNewPortActorAdminKey INTEGER } lacpNewPortCfgTableId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " LACP port number." ::= { lacpNewPortCfgTableEntry 1 } lacpNewPortState OBJECT-TYPE SYNTAX INTEGER { off(1), active(2), passive(3) } ACCESS read-only STATUS mandatory DESCRIPTION "LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer." ::= { lacpNewPortCfgTableEntry 2 } lacpNewPortActorPortPriority OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The priority value assigned to this Aggregation Port. This 16-bit value is read-write." ::= { lacpNewPortCfgTableEntry 3 } lacpNewPortActorAdminKey OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance." ::= { lacpNewPortCfgTableEntry 4 } upfastCurCfgState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable uplink fast" ::= { l2GeneralCfg 1 } upfastNewCfgState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable uplink fast" ::= { l2GeneralCfg 2 } updateCurCfgState OBJECT-TYPE SYNTAX INTEGER (10..200) ACCESS read-only STATUS mandatory DESCRIPTION "UplinkFast station update rate: packets per second" ::= { l2GeneralCfg 3 } updateNewCfgState OBJECT-TYPE SYNTAX INTEGER (10..200) ACCESS read-only STATUS mandatory DESCRIPTION "UplinkFast station update rate: packets per second" ::= { l2GeneralCfg 4 } fdbStatsCreates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of entries created in the Forwarding Database." ::= { fdbStats 1 } fdbStatsDeletes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of entries deleted from the Forwarding Database." ::= { fdbStats 2 } fdbStatsCurrent OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Current number of entries in the Forwarding Database." ::= { fdbStats 3 } fdbStatsHiwat OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Highest number of entries recorded at any given time in the Forwarding Database." ::= { fdbStats 4 } fdbStatsLookups OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of entry lookups in the Forwarding Database." ::= { fdbStats 5 } fdbStatsLookupFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of unsuccessful searches made in the Forwarding Database." ::= { fdbStats 6 } fdbStatsFinds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of searches in the Forwarding Database." ::= { fdbStats 7 } fdbStatsFindFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of search failures in the Forwarding Database." ::= { fdbStats 8 } fdbStatsFindOrCreates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of entries found or created in the Forwarding Database." ::= { fdbStats 9 } fdbStatsOverflows OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of entries overflowing the Forwarding Database." ::= { fdbStats 10 } stgStatsPortTable OBJECT-TYPE SYNTAX SEQUENCE OF StgStatsPortTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of Spanning Tree Group port statistics." ::= { stpStats 1 } stgStatsPortTableEntry OBJECT-TYPE SYNTAX StgStatsPortTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "Statistics about port of a particular Spanning Tree Group." INDEX { stgStatsStpIndex , stgStatsPortIndex } ::= { stgStatsPortTable 1 } stgStatsPortTableEntry ::= SEQUENCE { stgStatsStpIndex Integer32, stgStatsPortIndex Integer32, stgStatsPortRcvCfgBpdus Counter32, stgStatsPortRcvTcnBpdus Counter32, stgStatsPortXmtCfgBpdus Counter32, stgStatsPortXmtTcnBpdus Counter32 } stgStatsStpIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of a particular Spanning Tree Group." ::= { stgStatsPortTableEntry 1 } stgStatsPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port identifier of a particular Spanning Tree Group." ::= { stgStatsPortTableEntry 2 } stgStatsPortRcvCfgBpdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configuration BPDU's received on this port." ::= { stgStatsPortTableEntry 3 } stgStatsPortRcvTcnBpdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of TCN BPDU's received on this port." ::= { stgStatsPortTableEntry 4 } stgStatsPortXmtCfgBpdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configuration BPDU's trasmitted from the port." ::= { stgStatsPortTableEntry 5 } stgStatsPortXmtTcnBpdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of TCN BPDU's trasmitted from the port." ::= { stgStatsPortTableEntry 6 } lacpStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF LacpStatsTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of LACP Stats." ::= { lacpStats 1 } lacpStatsTableEntry OBJECT-TYPE SYNTAX LacpStatsTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "Lacp status info." INDEX { lacpStatsIndex } ::= { lacpStatsTable 1 } lacpStatsTableEntry ::= SEQUENCE { lacpStatsIndex Integer32, lacpdusRx Integer32, markerpdusRx Integer32, markerresponsepdusRx Integer32, unknownRx Integer32, illegalRx Integer32, lacpdusTx Integer32, markerpdusTx Integer32, markerresponsepdusTx Integer32 } lacpStatsIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index" ::= { lacpStatsTableEntry 1 } lacpdusRx OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Valid LACPDUs received" ::= { lacpStatsTableEntry 2 } markerpdusRx OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Valid Marker PDUs received" ::= { lacpStatsTableEntry 3 } markerresponsepdusRx OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Valid Marker Rsp PDUs received" ::= { lacpStatsTableEntry 4 } unknownRx OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Unknown version/TLV type" ::= { lacpStatsTableEntry 5 } illegalRx OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Illegal subtype received" ::= { lacpStatsTableEntry 6 } lacpdusTx OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "LACPDUs transmitted" ::= { lacpStatsTableEntry 7 } markerpdusTx OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Market PDUs transmitted" ::= { lacpStatsTableEntry 8 } markerresponsepdusTx OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Marker Rsp PDUs transmitted " ::= { lacpStatsTableEntry 9 } ufdNoLtMLinkFailure OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { ufdStats 1 } ufdNoLtMLinkBlockingState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { ufdStats 2 } ufdNoLtDAutoDisabled OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { ufdStats 3 } fdbClear OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Setting this value to clear(2) clears the entire master FDB." ::= { fdbInfo 1 } fdbTable OBJECT-TYPE SYNTAX SEQUENCE OF FdbEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of FDB entries." ::= { fdbInfo 2 } fdbEntry OBJECT-TYPE SYNTAX FdbEntry ACCESS read-only STATUS mandatory DESCRIPTION "A row in the FDB table" INDEX { fdbMacAddr } ::= { fdbTable 1 } fdbEntry ::= SEQUENCE { fdbMacAddr PhysAddress, fdbVlan Integer32, fdbSrcPort Integer32, fdbSrcTrunk Integer32, fdbState INTEGER, fdbRefSps DisplayString, fdbLearnedPort Integer32 } fdbMacAddr OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address for the FDB entry." ::= { fdbEntry 1 } fdbVlan OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The VLAN ID for the FDB entry." ::= { fdbEntry 2 } fdbSrcPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address." ::= { fdbEntry 3 } fdbState OBJECT-TYPE SYNTAX INTEGER { unknown(1), ignore(2), forward(3), flood(4), ffd(5), trunk(6), vir(7), vsr(8), vpr(9), other(10) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of the FDB entry. The meanings of the values are : unknown(1) : the MAC address has not yet been learned by the switch but has only been seen as a destination address forward(3) : the MAC address has been learned by the switch flood(4) : the MAC address is a multicast destination address trunk(6) : frames with this MAC address are forwarded to trunk group vir(7) : frames with this MAC address are forwarded for L3 processing" ::= { fdbEntry 4 } fdbRefSps OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The referenced SPs associated with this FDB entry." ::= { fdbEntry 5 } fdbLearnedPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The learned port associated with this FDB entry." ::= { fdbEntry 6 } fdbSrcTrunk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Either the value '0', or the trunk number of the trunk on which a frame having a source address equal to the value of the corresponding instance has been seen. A value of '0' indicates that the source address is not associated with a trunk." ::= { fdbEntry 7 } stpInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF StpInfoTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of Spanning Tree Group information." ::= { stpInfo 1 } stpInfoTableEntry OBJECT-TYPE SYNTAX StpInfoTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "Information about a particular Spanning Tree Group." INDEX { stpInfoIndex } ::= { stpInfoTable 1 } stpInfoTableEntry ::= SEQUENCE { stpInfoIndex Integer32, stpInfoState INTEGER, stgInfoVlanBmap OCTET STRING, stpInfoTimeSinceTopChange TimeTicks, stpInfoTopChanges Counter32, stpInfoDesignatedRoot BridgeId, stpInfoRootCost Integer32, stpInfoRootPort Integer32, stpInfoHelloTime Integer32, stpInfoMaxAge Integer32, stpInfoForwardDelay Integer32, stpInfoHoldTime Integer32, stpInfoBrgPriority INTEGER, stpInfoBrgHelloTime INTEGER, stpInfoBrgForwardDelay INTEGER, stpInfoBrgMaxAge INTEGER, stpInfoAgingTime INTEGER } stpInfoIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB." ::= { stpInfoTableEntry 1 } stpInfoState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Turn on of off Spanning Tree operation of a particular Spanning Tree Group." ::= { stpInfoTableEntry 2 } stgInfoVlanBmap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..512)) ACCESS read-only STATUS mandatory DESCRIPTION "The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree" ::= { stpInfoTableEntry 3 } stpInfoTimeSinceTopChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity." ::= { stpInfoTableEntry 4 } stpInfoTopChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of topology changes detected by this bridge since the management entity was last reset or initialized." ::= { stpInfoTableEntry 5 } stpInfoDesignatedRoot OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node." ::= { stpInfoTableEntry 6 } stpInfoRootCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The cost of the path to the root as seen from this bridge." ::= { stpInfoTableEntry 7 } stpInfoRootPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the port which offers the lowest cost path from this bridge to the root bridge." ::= { stpInfoTableEntry 8 } stpInfoMaxAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using." ::= { stpInfoTableEntry 9 } stpInfoHelloTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using." ::= { stpInfoTableEntry 10 } stpInfoForwardDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database." ::= { stpInfoTableEntry 11 } stpInfoHoldTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second." ::= { stpInfoTableEntry 12 } stpInfoBrgPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID." ::= { stpInfoTableEntry 13 } stpInfoBrgHelloTime OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-only STATUS mandatory DESCRIPTION "The value in seconds that all bridges use for HelloTime when this bridge is acting as the root." ::= { stpInfoTableEntry 14 } stpInfoBrgForwardDelay OBJECT-TYPE SYNTAX INTEGER (4..30) ACCESS read-only STATUS mandatory DESCRIPTION "The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root." ::= { stpInfoTableEntry 15 } stpInfoBrgMaxAge OBJECT-TYPE SYNTAX INTEGER (6..40) ACCESS read-only STATUS mandatory DESCRIPTION "The value in seconds that all bridges use for MaxAge when this bridge is acting as the root." ::= { stpInfoTableEntry 16 } stpInfoAgingTime OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The timeout period in seconds for aging out dynamically learned forwarding information." ::= { stpInfoTableEntry 17 } stpInfoPortTable OBJECT-TYPE SYNTAX SEQUENCE OF StpInfoPortTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of Spanning Tree Group port information." ::= { stpInfo 2 } stpInfoPortTableEntry OBJECT-TYPE SYNTAX StpInfoPortTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "Information about port configuration for a particular Spanning Tree Group." INDEX { stpInfoPortStpIndex , stpInfoPortIndex } ::= { stpInfoPortTable 1 } stpInfoPortTableEntry ::= SEQUENCE { stpInfoPortStpIndex Integer32, stpInfoPortIndex Integer32, stpInfoPortState INTEGER, stpInfoPortDesignatedRoot BridgeId, stpInfoPortDesignatedCost Integer32, stpInfoPortDesignatedBridge BridgeId, stpInfoPortDesignatedPort OCTET STRING, stpInfoPortForwardTransitions Counter32, stpInfoPortPathCost Integer32 } stpInfoPortStpIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of a particular Spanning Tree Group." ::= { stpInfoPortTableEntry 1 } stpInfoPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port identifier of a particular Spanning Tree Group." ::= { stpInfoPortTableEntry 2 } stpInfoPortState OBJECT-TYPE SYNTAX INTEGER { disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled, this object will have a value of disabled(1)." ::= { stpInfoPortTableEntry 3 } stpInfoPortDesignatedRoot OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached." ::= { stpInfoPortTableEntry 4 } stpInfoPortDesignatedCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs." ::= { stpInfoPortTableEntry 5 } stpInfoPortDesignatedBridge OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment." ::= { stpInfoPortTableEntry 6 } stpInfoPortDesignatedPort OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "The Port Identifier of the port on the Designated Bridge for this port's segment." ::= { stpInfoPortTableEntry 7 } stpInfoPortForwardTransitions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this port has transitioned from the Learning state to the Forwarding state." ::= { stpInfoPortTableEntry 8 } stpInfoPortPathCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The path cost of the port." ::= { stpInfoPortTableEntry 9 } cistRoot OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "The bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Root Identifier parameter in all Configuration Bridge PDUs originated by this node." ::= { cistGeneralInfo 1 } cistRootPathCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The cost of the path to the CIST Root as seen from this bridge." ::= { cistGeneralInfo 2 } cistRootPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge." ::= { cistGeneralInfo 3 } cistRootHelloTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of time between the transmission of Configuration bridge PDUs in seconds." ::= { cistGeneralInfo 4 } cistRootMaxAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value in seconds that all bridges use for MaxAge when this bridge is acting as the root." ::= { cistGeneralInfo 5 } cistRootForwardDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root." ::= { cistGeneralInfo 6 } cistRegionalRoot OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "The bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node." ::= { cistGeneralInfo 7 } cistRegionalPathCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Cost of the path to the CIST Regional Root as seen from this bridge." ::= { cistGeneralInfo 8 } cistBridgePriority OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The value of the writable portion of the Brigde Identifier comprising of the first two octets." ::= { cistGeneralInfo 9 } cistBridgeMaxAge OBJECT-TYPE SYNTAX INTEGER (6..40) ACCESS read-only STATUS mandatory DESCRIPTION "The value in seconds that all bridges use for MaxAge when this bridge is acting as the root." ::= { cistGeneralInfo 10 } cistBridgeForwardDelay OBJECT-TYPE SYNTAX INTEGER (4..30) ACCESS read-only STATUS mandatory DESCRIPTION "The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root." ::= { cistGeneralInfo 11 } cistMaxHopCount OBJECT-TYPE SYNTAX INTEGER (4..60) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the maximum hop count value." ::= { cistGeneralInfo 12 } mstpDigest OBJECT-TYPE SYNTAX DisplayString (SIZE(0..63)) ACCESS read-only STATUS mandatory DESCRIPTION "The digest of the mstp." ::= { cistGeneralInfo 13 } cistInfoPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CistInfoPortTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of CIST Port information." ::= { cistInfo 2 } cistInfoPortTableEntry OBJECT-TYPE SYNTAX CistInfoPortTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "Information about a particular CIST Port." INDEX { cistInfoPortIndex } ::= { cistInfoPortTable 1 } cistInfoPortTableEntry ::= SEQUENCE { cistInfoPortIndex Integer32, cistInfoPortPriority Integer32, cistInfoPortPathCost Integer32, cistInfoPortState INTEGER, cistInfoPortRole INTEGER, cistInfoPortDesignatedBridge BridgeId, cistInfoPortDesignatedPort OCTET STRING, cistInfoPortLinkType INTEGER, cistInfoPortHelloTime INTEGER } cistInfoPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the port for which this entry contains spanning tree configuration." ::= { cistInfoPortTableEntry 1 } cistInfoPortPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value." ::= { cistInfoPortTableEntry 2 } cistInfoPortPathCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The contribution of this port to the path cost of paths towards the CIST Root which include this port." ::= { cistInfoPortTableEntry 3 } cistInfoPortState OBJECT-TYPE SYNTAX INTEGER { disabled(1), discarding(2), learning(4), forwarding(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Current state of the Port as defined by the Common spanning tree protocol." ::= { cistInfoPortTableEntry 4 } cistInfoPortRole OBJECT-TYPE SYNTAX INTEGER { disabled(1), alternate(2), backup(3), root(4), designated(5), master(6), unknown(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Selected Port Role of the port for this spanning tree instance." ::= { cistInfoPortTableEntry 5 } cistInfoPortDesignatedBridge OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment." ::= { cistInfoPortTableEntry 6 } cistInfoPortDesignatedPort OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "The Port identifier of the port on the Designated Bridge for this port's segment." ::= { cistInfoPortTableEntry 7 } cistInfoPortLinkType OBJECT-TYPE SYNTAX INTEGER { p2p(1), shared(2), unknown(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port is being treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port is being treated as having a shared media connection." ::= { cistInfoPortTableEntry 8 } cistInfoPortHelloTime OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-only STATUS mandatory DESCRIPTION "The amount of time between the transmission of Configuration Port PDUs in seconds." ::= { cistInfoPortTableEntry 9 } lacpInfoPortTable OBJECT-TYPE SYNTAX SEQUENCE OF LacpInfoPortTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of LACP port information." ::= { lacpInfo 1 } lacpInfoPortTableEntry OBJECT-TYPE SYNTAX LacpInfoPortTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "Information about a LACP port." INDEX { lacpInfoPortIndex } ::= { lacpInfoPortTable 1 } lacpInfoPortTableEntry ::= SEQUENCE { lacpInfoPortIndex Integer32, lacpInfoPortSelected INTEGER, lacpInfoPortNtt INTEGER, lacpInfoPortReadyN INTEGER, lacpInfoPortMoved INTEGER } lacpInfoPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port identifier." ::= { lacpInfoPortTableEntry 1 } lacpInfoPortSelected OBJECT-TYPE SYNTAX INTEGER { selected(1), unselected(2), standby(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Selected flag value indicates that the selection logic has selected an appropriate Aggregator. A value of unselected indicates that no aggregator is currently selected. A value of standby indicates that although the selection logic has selected an appropriate Aggregator, aggregation restrictions currently precent the port from being enabled as part of the aggregation, and so the port is being held in standby condition." ::= { lacpInfoPortTableEntry 2 } lacpInfoPortNtt OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Need to transmit flag. True indicates that there is new protocol information that should be transmitted on the link." ::= { lacpInfoPortTableEntry 3 } lacpInfoPortReadyN OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "True value for Ready_N flag indicates that the wait while timer has expired and it is waiting to attach to an aggregator. There is one Ready_N value for each port." ::= { lacpInfoPortTableEntry 4 } lacpInfoPortMoved OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Port Moved flag is set to true if the receive machine for a port is in the port_disabled state, and the combination of partner oper system and partner oper port number in use by the port has been used by received in an incoming LACPDU on a different port." ::= { lacpInfoPortTableEntry 5 } ufdCurCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable UFD state" ::= { ufdGeneralCfg 1 } ufdNewCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable UFD state" ::= { ufdGeneralCfg 2 } ufdCurCfgLtMPorts OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The LtM port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtM 0 - The represented port does not belong to LtM" ::= { ufdGeneralCfg 3 } ufdNewCfgLtMPorts OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The LtM port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtM 0 - The represented port does not belong to LtM" ::= { ufdGeneralCfg 4 } ufdCurCfgLtMTrunks OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The LtM trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtM 0 - The represented trunk does not belong to LtM" ::= { ufdGeneralCfg 5 } ufdNewCfgLtMTrunks OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The LtM trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtM 0 - The represented trunk does not belong to LtM" ::= { ufdGeneralCfg 6 } ufdCurCfgLtDPorts OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The LtD port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtD 0 - The represented port does not belong to LtD" ::= { ufdGeneralCfg 7 } ufdNewCfgLtDPorts OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The LtD port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtD 0 - The represented port does not belong to LtD" ::= { ufdGeneralCfg 8 } ufdCurCfgLtDTrunks OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The LtD trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtD 0 - The represented trunk does not belong to LtD" ::= { ufdGeneralCfg 9 } ufdNewCfgLtDTrunks OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The LtD trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtD 0 - The represented trunk does not belong to LtD" ::= { ufdGeneralCfg 10 } ufdNewCfgAddLtMPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port to be added to LtM. A '0' value is returned when read." ::= { ufdGeneralCfg 11 } ufdNewCfgRemoveLtMPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port to be removed from LtM. A '0' value is returned when read." ::= { ufdGeneralCfg 12 } ufdNewCfgAddLtMTrunk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The trunk to be added to LtM. A '0' value is returned when read." ::= { ufdGeneralCfg 13 } ufdNewCfgRemoveLtMTrunk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The trunk to be removed from LtM. A '0' value is returned when read." ::= { ufdGeneralCfg 14 } ufdNewCfgAddLtDPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port to be added to LtD. A '0' value is returned when read." ::= { ufdGeneralCfg 15 } ufdNewCfgRemoveLtDPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port to be removed from LtM. A '0' value is returned when read." ::= { ufdGeneralCfg 16 } ufdNewCfgAddLtDTrunk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The trunk to be added to LtM. A '0' value is returned when read." ::= { ufdGeneralCfg 17 } ufdNewCfgRemoveLtDTrunk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The trunk to be removed from LtD. A '0' value is returned when read." ::= { ufdGeneralCfg 18 } ufdCurCfgGlobalState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Current global Failover settings." ::= { ufdGeneralCfg 19 } ufdNewCfgGlobalState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "New global Failover settings." ::= { ufdGeneralCfg 20 } dot1xCurStatus OBJECT-TYPE SYNTAX INTEGER { enable(0), disable(1) } ACCESS read-only STATUS mandatory DESCRIPTION " Dot1x status " ::= { dot1x 1 } dot1xNewStatus OBJECT-TYPE SYNTAX INTEGER { enable(0), disable(1) } ACCESS read-only STATUS mandatory DESCRIPTION " Dot1x status " ::= { dot1x 2 } dot1xCurCfgPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1xCurCfgPortEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of 8021x configuration in the Current_config." ::= { dot1x 3 } dot1xCurCfgPortEntry OBJECT-TYPE SYNTAX Dot1xCurCfgPortEntry ACCESS read-only STATUS mandatory DESCRIPTION "Information about 8021x Port Config" INDEX { dot1xCurCfgPortIndex } ::= { dot1xCurCfgPortTable 1 } dot1xCurCfgPortEntry ::= SEQUENCE { dot1xCurCfgPortIndex Integer32, dot1xCurCfgPortMode INTEGER, dot1xCurCfgPortQtPeriod INTEGER, dot1xCurCfgPortTxPeriod INTEGER, dot1xCurCfgPortSupTmout INTEGER, dot1xCurCfgPortSrvTmout INTEGER, dot1xCurCfgPortMaxRq INTEGER, dot1xCurCfgPortRaPeriod INTEGER, dot1xCurCfgPortReAuth INTEGER } dot1xCurCfgPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The 8021x Port number for which the table is related." ::= { dot1xCurCfgPortEntry 1 } dot1xCurCfgPortMode OBJECT-TYPE SYNTAX INTEGER { forceUnauth(0), auto(1), forceAuth(2) } ACCESS read-only STATUS mandatory DESCRIPTION " Port authenticaton mode forceUnauth(0), auto(1), forceAuth(2) " ::= { dot1xCurCfgPortEntry 2 } dot1xCurCfgPortQtPeriod OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Quiet period (0-65535) " ::= { dot1xCurCfgPortEntry 3 } dot1xCurCfgPortTxPeriod OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION " Tx Period " ::= { dot1xCurCfgPortEntry 4 } dot1xCurCfgPortSupTmout OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION " Supplicant timeout (1..65535) " ::= { dot1xCurCfgPortEntry 5 } dot1xCurCfgPortSrvTmout OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION " Server timeout (1..65535) " ::= { dot1xCurCfgPortEntry 6 } dot1xCurCfgPortMaxRq OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-only STATUS mandatory DESCRIPTION " Maximum numer of requests (1..10) " ::= { dot1xCurCfgPortEntry 7 } dot1xCurCfgPortRaPeriod OBJECT-TYPE SYNTAX INTEGER (0..604800) ACCESS read-only STATUS mandatory DESCRIPTION " Reautentication period (0..604800) " ::= { dot1xCurCfgPortEntry 8 } dot1xCurCfgPortReAuth OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-only STATUS mandatory DESCRIPTION " ReAuthentication state off(0), on(1) " ::= { dot1xCurCfgPortEntry 9 } dot1xNewCfgPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1xNewCfgPortEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of 8021x configuration in the new_config." ::= { dot1x 4 } dot1xNewCfgPortEntry OBJECT-TYPE SYNTAX Dot1xNewCfgPortEntry ACCESS read-only STATUS mandatory DESCRIPTION "Information about 8021x Port Config" INDEX { dot1xNewCfgPortIndex } ::= { dot1xNewCfgPortTable 1 } dot1xNewCfgPortEntry ::= SEQUENCE { dot1xNewCfgPortIndex Integer32, dot1xNewCfgPortMode INTEGER, dot1xNewCfgPortQtPeriod INTEGER, dot1xNewCfgPortTxPeriod INTEGER, dot1xNewCfgPortSupTmout INTEGER, dot1xNewCfgPortSrvTmout INTEGER, dot1xNewCfgPortMaxRq INTEGER, dot1xNewCfgPortRaPeriod INTEGER, dot1xNewCfgPortReAuth INTEGER, dot1xNewCfgPortDefault INTEGER, dot1xNewCfgPortApplyGlobal INTEGER } dot1xNewCfgPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The 8021x Port number for which the table is related." ::= { dot1xNewCfgPortEntry 1 } dot1xNewCfgPortMode OBJECT-TYPE SYNTAX INTEGER { forceUnauth(0), auto(1), forceAuth(2) } ACCESS read-only STATUS mandatory DESCRIPTION " Port authentication mode forceUnauth(0), auto(1), forceAuth(2) " ::= { dot1xNewCfgPortEntry 2 } dot1xNewCfgPortQtPeriod OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION " Quiet period (0..65535) " ::= { dot1xNewCfgPortEntry 3 } dot1xNewCfgPortTxPeriod OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION " Tx Period (1..65535) " ::= { dot1xNewCfgPortEntry 4 } dot1xNewCfgPortSupTmout OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION " Supplicant Timeout (1..65535) " ::= { dot1xNewCfgPortEntry 5 } dot1xNewCfgPortSrvTmout OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION " Server Timeout (1..65535) " ::= { dot1xNewCfgPortEntry 6 } dot1xNewCfgPortMaxRq OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-only STATUS mandatory DESCRIPTION " Maximum number of requests (1..10) " ::= { dot1xNewCfgPortEntry 7 } dot1xNewCfgPortRaPeriod OBJECT-TYPE SYNTAX INTEGER (1..604800) ACCESS read-only STATUS mandatory DESCRIPTION " Reauthentication period (1..604800) " ::= { dot1xNewCfgPortEntry 8 } dot1xNewCfgPortReAuth OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-only STATUS mandatory DESCRIPTION " Reauthentication state off(0), on(1) " ::= { dot1xNewCfgPortEntry 9 } dot1xNewCfgPortDefault OBJECT-TYPE SYNTAX INTEGER { other(0), apply(1) } ACCESS read-only STATUS mandatory DESCRIPTION " Port default settings " ::= { dot1xNewCfgPortEntry 10 } dot1xNewCfgPortApplyGlobal OBJECT-TYPE SYNTAX INTEGER { other(0), apply(1) } ACCESS read-only STATUS mandatory DESCRIPTION " Apply Global config " ::= { dot1xNewCfgPortEntry 11 } dot1xCurCfgGlobalMode OBJECT-TYPE SYNTAX INTEGER { forceUnauth(0), auto(1), forceAuth(2) } ACCESS read-only STATUS mandatory DESCRIPTION " Autehtication Mode forceUnauth(0), auto(1), forceAuth(2) " ::= { dot1xCurCfgGlobalTable 1 } dot1xCurCfgGlobalQtPeriod OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION " Quiet period (0..65535) " ::= { dot1xCurCfgGlobalTable 2 } dot1xCurCfgGlobalTxPeriod OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION " Tx period (1..65535) " ::= { dot1xCurCfgGlobalTable 3 } dot1xCurCfgGlobalSupTmout OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION " Supplicant timeout (1..65535) " ::= { dot1xCurCfgGlobalTable 4 } dot1xCurCfgGlobalSrvTmout OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION " Server timeout (1..65535) " ::= { dot1xCurCfgGlobalTable 5 } dot1xCurCfgGlobalMaxRq OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-only STATUS mandatory DESCRIPTION " Maximum number of requests (1..10) " ::= { dot1xCurCfgGlobalTable 6 } dot1xCurCfgGlobalRaPeriod OBJECT-TYPE SYNTAX INTEGER (0..604800) ACCESS read-only STATUS mandatory DESCRIPTION " Reauthentication period (0..604800) " ::= { dot1xCurCfgGlobalTable 7 } dot1xCurCfgGlobalReAuth OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { dot1xCurCfgGlobalTable 8 } dot1xNewCfgGlobalMode OBJECT-TYPE SYNTAX INTEGER { forceUnauth(0), auto(1), forceAuth(2) } ACCESS read-only STATUS mandatory DESCRIPTION " Authentication Mode " ::= { dot1xNewCfgGlobalTable 1 } dot1xNewCfgGlobalQtPeriod OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION " Quiet Period (0..65535) " ::= { dot1xNewCfgGlobalTable 2 } dot1xNewCfgGlobalTxPeriod OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION " Tx Period (1..65535) " ::= { dot1xNewCfgGlobalTable 3 } dot1xNewCfgGlobalSupTmout OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION " Supplicand timeout (1..65535) " ::= { dot1xNewCfgGlobalTable 4 } dot1xNewCfgGlobalSrvTmout OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION " Server timeout (1..65535) " ::= { dot1xNewCfgGlobalTable 5 } dot1xNewCfgGlobalMaxRq OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-only STATUS mandatory DESCRIPTION " Maximum number of requests (1..10) " ::= { dot1xNewCfgGlobalTable 6 } dot1xNewCfgGlobalRaPeriod OBJECT-TYPE SYNTAX INTEGER (1..604800) ACCESS read-only STATUS mandatory DESCRIPTION " Reauthentication period (1..604800) " ::= { dot1xNewCfgGlobalTable 7 } dot1xNewCfgGlobalReAuth OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-only STATUS mandatory DESCRIPTION " Reauthentication status " ::= { dot1xNewCfgGlobalTable 8 } dot1xInfoPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1xInfoPortEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of 8021x configuration in the Current_config." ::= { dot1xInfo 1 } dot1xInfoPortEntry OBJECT-TYPE SYNTAX Dot1xInfoPortEntry ACCESS read-only STATUS mandatory DESCRIPTION "Information about 8021x Port Config" INDEX { dot1xInfoPortIndex } ::= { dot1xInfoPortTable 1 } dot1xInfoPortEntry ::= SEQUENCE { dot1xInfoPortIndex Integer32, dot1xInfoPortAuthMode INTEGER, dot1xInfoPortAuthStatus INTEGER, dot1xInfoPortCtrlDir INTEGER, dot1xInfoPortAuthPAEState INTEGER, dot1xInfoPortBackAuthState INTEGER } dot1xInfoPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The 8021x Port number for which the table is related." ::= { dot1xInfoPortEntry 1 } dot1xInfoPortAuthMode OBJECT-TYPE SYNTAX INTEGER { forceUnauth(0), auto(1), forceAuth(2) } ACCESS read-only STATUS mandatory DESCRIPTION " Authentication mode " ::= { dot1xInfoPortEntry 2 } dot1xInfoPortAuthStatus OBJECT-TYPE SYNTAX INTEGER { authorized(0), unauthorized(1) } ACCESS read-only STATUS mandatory DESCRIPTION " Authentication status " ::= { dot1xInfoPortEntry 3 } dot1xInfoPortCtrlDir OBJECT-TYPE SYNTAX INTEGER { both(0), in(1) } ACCESS read-only STATUS mandatory DESCRIPTION " Controlled Directions " ::= { dot1xInfoPortEntry 4 } dot1xInfoPortAuthPAEState OBJECT-TYPE SYNTAX INTEGER { initialize(0), disconnected(1), connecting(2), authenticating(3), authenticated(4), aborting(5), held(6), forceauth(7), forceunauth(8) } ACCESS read-only STATUS mandatory DESCRIPTION " Authenticator PAE State " ::= { dot1xInfoPortEntry 5 } dot1xInfoPortBackAuthState OBJECT-TYPE SYNTAX INTEGER { request(0), response(1), success(2), fail(3), timeout(4), idle(5), initialize(6) } ACCESS read-only STATUS mandatory DESCRIPTION " Backend authenticator PAE state " ::= { dot1xInfoPortEntry 6 } dot1xSystemCapability OBJECT-TYPE SYNTAX INTEGER { authenticator(0), supplicant(1), authenticatorAndSupplicant(2), unknown(3) } ACCESS read-only STATUS mandatory DESCRIPTION " System capability " ::= { dot1xSystemInfo 1 } dot1xSystemStatus OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION " System status " ::= { dot1xSystemInfo 2 } dot1xSystemProtoVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Protocol version " ::= { dot1xSystemInfo 3 } fdbCurCfgAgingTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Fdb current aging time" ::= { fdbGeneralCfg 1 } fdbNewCfgAgingTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Fdb new aging time." ::= { fdbGeneralCfg 2 } fdbNewCfgStaticTable OBJECT-TYPE SYNTAX SEQUENCE OF FdbNewCfgStaticEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of FDB static entries." ::= { fdb 2 } fdbNewCfgStaticEntry OBJECT-TYPE SYNTAX FdbNewCfgStaticEntry ACCESS read-only STATUS mandatory DESCRIPTION "A row in the fdb table." INDEX { fdbNewCfgEntryIndex } ::= { fdbNewCfgStaticTable 1 } fdbNewCfgStaticEntry ::= SEQUENCE { fdbNewCfgEntryIndex Integer32, fdbNewCfgAddVlan Integer32, fdbNewCfgAddPort Integer32, fdbNewCfgAddMac PhysAddress, fdbNewCfgDelStaticEntry INTEGER } fdbNewCfgEntryIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The fdb entry index" ::= { fdbNewCfgStaticEntry 1 } fdbNewCfgAddVlan OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Add vlan for fdb entry index" ::= { fdbNewCfgStaticEntry 2 } fdbNewCfgAddPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address port number." ::= { fdbNewCfgStaticEntry 3 } fdbNewCfgAddMac OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "Add a fdb entry." ::= { fdbNewCfgStaticEntry 4 } fdbNewCfgDelStaticEntry OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } ACCESS read-only STATUS mandatory DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { fdbNewCfgStaticEntry 5 } dot1pInfoPriorityCOSTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1pInfoPriorityCOSEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of current priority to COS queue information." ::= { dot1pInfo 1 } dot1pInfoPriorityCOSEntry OBJECT-TYPE SYNTAX Dot1pInfoPriorityCOSEntry ACCESS read-only STATUS mandatory DESCRIPTION "Current information about 8021p priority to COS queue." INDEX { dot1pInfoPriorityIndex } ::= { dot1pInfoPriorityCOSTable 1 } dot1pInfoPriorityCOSEntry ::= SEQUENCE { dot1pInfoPriorityIndex INTEGER, dot1pInfoPriorityCOSQueue INTEGER, dot1pInfoPriorityCOSWeight INTEGER } dot1pInfoPriorityIndex OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-only STATUS mandatory DESCRIPTION "The 8021p priority for which the table is related." ::= { dot1pInfoPriorityCOSEntry 1 } dot1pInfoPriorityCOSQueue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The 8021p priority COSq." ::= { dot1pInfoPriorityCOSEntry 2 } dot1pInfoPriorityCOSWeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The 8021p priority weight." ::= { dot1pInfoPriorityCOSEntry 3 } dot1pInfoPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1pInfoPortEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of 8021p port priority configuration in the Current_config." ::= { dot1pInfo 2 } dot1pInfoPortEntry OBJECT-TYPE SYNTAX Dot1pInfoPortEntry ACCESS read-only STATUS mandatory DESCRIPTION "Information about 8021p Port Priority" INDEX { dot1pInfoPortIndex } ::= { dot1pInfoPortTable 1 } dot1pInfoPortEntry ::= SEQUENCE { dot1pInfoPortIndex Integer32, dot1pInfoPortPriority INTEGER, dot1pInfoPortCOSq INTEGER, dot1pInfoPortWeight INTEGER } dot1pInfoPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The 8021p Port number for which the table is related." ::= { dot1pInfoPortEntry 1 } dot1pInfoPortPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The 8021p Port number for which the table is related." ::= { dot1pInfoPortEntry 2 } dot1pInfoPortCOSq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The 8021p port COSq." ::= { dot1pInfoPortEntry 3 } dot1pInfoPortWeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The 8021p port weight." ::= { dot1pInfoPortEntry 4 } generalInfoStpUplinkFast OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "STP uplink fast mode" ::= { genInfo 1 } generalInfoUplinkFastRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "STP fast uplink rate." ::= { genInfo 2 } vlanInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanInfoTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of VLAN information." ::= { vlanInfo 1 } vlanInfoTableEntry OBJECT-TYPE SYNTAX VlanInfoTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "Information about a particular VLAN." INDEX { vlanInfoId } ::= { vlanInfoTable 1 } vlanInfoTableEntry ::= SEQUENCE { vlanInfoId INTEGER, vlanInfoName DisplayString, vlanInfoStatus INTEGER, vlanInfoPorts OCTET STRING } vlanInfoId OBJECT-TYPE SYNTAX INTEGER (1..4095) ACCESS read-only STATUS mandatory DESCRIPTION "The VLAN identifier." ::= { vlanInfoTableEntry 1 } vlanInfoName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The VLAN name." ::= { vlanInfoTableEntry 2 } vlanInfoStatus OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable, VLAN state information" ::= { vlanInfoTableEntry 3 } vlanInfoPorts OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The port list information in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN" ::= { vlanInfoTableEntry 4 } trunkGroupInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF TrunkGroupInfoTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "The table of trunk group information." ::= { trunkGroupInfo 1 } trunkGroupInfoTableEntry OBJECT-TYPE SYNTAX TrunkGroupInfoTableEntry ACCESS read-only STATUS mandatory DESCRIPTION "A row in trunk group information table." INDEX { trunkGroupInfoIndex } ::= { trunkGroupInfoTable 1 } trunkGroupInfoTableEntry ::= SEQUENCE { trunkGroupInfoIndex Integer32, trunkGroupInfoState INTEGER, trunkGroupInfoPorts OCTET STRING } trunkGroupInfoIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of the trunk group." ::= { trunkGroupInfoTableEntry 1 } trunkGroupInfoState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Trunk group state." ::= { trunkGroupInfoTableEntry 2 } trunkGroupInfoPorts OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group" ::= { trunkGroupInfoTableEntry 3 } END