-- SECTION 1: Top Level Definitions
 
ATM-TRAP-MIB DEFINITIONS ::= BEGIN

-- Centillion Atm Trap MIB Release 1.0.1
-- Revision 01/12/2000
-- rcr     04/03/01 CR147311  - add SscopUp trap
 
-- Copyright 1998 Bay Networks, Inc.
-- All rights reserved.
-- This Bay Networks SNMP Management Information Base Specification
-- (Specification) embodies Bay Networks' confidential and
-- proprietary intellectual property. Bay Networks retains all
-- title and ownership in the Specification, including any
-- revisions.
 
-- This Specification is supplied "AS IS," and Bay Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
 
 
-- Imports
  
IMPORTS
      TRAP-TYPE   FROM RFC-1215
      atmTraps    FROM S5-ROOT-MIB
      atmPortCardIndex,atmPortPortIndex,atmPortSscopStatus
	          FROM CENTILLION-ATMCFG-MIB;
      
  
  
-- SECTION 2: ATM traps definitions
  
  
s5CtrSscopDown  TRAP-TYPE
     ENTERPRISE  atmTraps
     VARIABLES   {atmPortCardIndex,
                  atmPortPortIndex,
                  atmPortSscopStatus }
--   STATUS      mandatory
     DESCRIPTION
         " This trap is sent when the SSCOP goes down
           i.e., when the peer protocol has failed to
           respond to the max number of status polls
           by its peer.
             atmPortCardIndex.........the ATM card id.
             atmPortPortIndex.........the ATM port id.
             atmPortSscopStatus ..........the status of the
           SSCOP protocol."
     ::= 1

s5CtrAdmaLockup  TRAP-TYPE
     ENTERPRISE  atmTraps
     VARIABLES   {atmPortCardIndex,
                  atmPortPortIndex}
--   STATUS      mandatory
     DESCRIPTION
         " This trap is sent when a ADMA lockup condition
           is detected on the MCP.  The MCP must be reset
           to clear this condition.
             atmPortCardIndex.........the ATM card id.
             atmPortPortIndex.........the ATM port id."
     ::= 2

s5CtrAcmaLockup  TRAP-TYPE
     ENTERPRISE  atmTraps
     VARIABLES   {atmPortCardIndex}
--   STATUS      mandatory
     DESCRIPTION
         " This trap is sent when a ACMA queue stuck
           condition is detected on the MCP.  The 
           MCP must be reset to clear this condition.
             atmPortCardIndex.........the ATM card id."
     ::= 3

s5CtrSscopUp  TRAP-TYPE
     ENTERPRISE  atmTraps
     VARIABLES   {atmPortCardIndex,
                  atmPortPortIndex,
                  atmPortSscopStatus }
--   STATUS      mandatory
     DESCRIPTION
         " This trap is sent when the SSCOP uomes up.
             atmPortCardIndex.........the ATM card id.
             atmPortPortIndex.........the ATM port id.
             atmPortSscopStatus ..........the status of the
           SSCOP protocol."
     ::= 4

END