-- *****************************************************************
-- CISCO-BULK-FILE-CAPABILITY.my: CISCO-BULK-FILE-MIB AGENT-CAPABILITIES
--
-- November, 2003, Yizhong Shen
--
-- Copyright (c) 2000, 2002, 2003, 2006 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************

CISCO-BULK-FILE-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY
                FROM SNMPv2-SMI
        AGENT-CAPABILITIES
                FROM SNMPv2-CONF
        DisplayString
                FROM SNMPv2-TC
        ciscoAgentCapability
                FROM CISCO-SMI;

ciscoBulkFileCapability MODULE-IDENTITY
                LAST-UPDATED    "200602060000Z"
                ORGANIZATION    "Cisco Systems, Inc."
                CONTACT-INFO
                        "       Cisco Systems
                                Customer Service

                        Postal: 170 West Tasman Drive
                                San Jose, CA  95134
                                USA

                           Tel: +1 800 553-NETS

                        E-mail: cs-snmp@cisco.com"
                DESCRIPTION
                        "Agent capabilities for CISCO-BULK-FILE-MIB"

                REVISION        "200602060000Z"
                DESCRIPTION
                        "Added ciscoBulkFileCapCRS1V2R0
                         Agent Capabilities for IOS XR 2.0"

                REVISION        "200311130000Z"
                DESCRIPTION
                        "Added VXSM 5.0.0 PRODUCT-RELEASE of 
                         ciscoBulkFileCapabilityV3R00"

                REVISION        "200202170000Z"
                DESCRIPTION
                        "Added following capabilities for
                         MGX8850/SES Products:

                         - ciscoBulkFileCapabilityV2R00
                         - ciscoBulkFileCapabilityV3R00."

                REVISION        "200012040000Z"
                DESCRIPTION
                        "Initial version of this MIB module."
        ::= { ciscoAgentCapability 188 }

ciscoBulkFileCapabilityV1R0 AGENT-CAPABILITIES

PRODUCT-RELEASE "Cisco IOS mc 1.0"
STATUS          current
DESCRIPTION     "Cisco Bulk File MIB capabilities"

SUPPORTS        CISCO-BULK-FILE-MIB
INCLUDES        { ciscoBulkFileDefineGroup }

VARIATION   cbfDefineFileFormat
SYNTAX      INTEGER { standardBER(1), bulkBinary(2), bulkASCII(3) }
DESCRIPTION "standardBER(1) is not supported"

VARIATION   cbfDefineFileStorage
SYNTAX      INTEGER { volatile(2) }
DESCRIPTION "ephemeral(1) and permanent(3) are not supported"

VARIATION   cbfDefineFileName
SYNTAX      DisplayString (SIZE (1..255))
DESCRIPTION "The files can only be stored in the '/tmp' directory.
            The implementation attaches '/tmp' to the start of the
            NMS specified file name. Therefore, if the NMS specifies
            the file name as 'xyz', it'll be stored in '/tmp/xyz' and
            if its 'xyz/pqr', it'll be stored in '/tmp/xyz/pqr'. But
            if the name is '/tmp/xyz', the file will be created in
            '/tmp/xyz' and not '/tmp/tmp/xyz'"

        ::= { ciscoBulkFileCapability 1 }

ciscoBulkFileCapabilityV2R00 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "MGX8850 Release 2.00,
                          BPX SES Release 1.00."
    STATUS               current
    DESCRIPTION          "CISCO-BULK-FILE-MIB Capabilities."

    SUPPORTS CISCO-BULK-FILE-MIB
    INCLUDES { ciscoBulkFileDefineGroup,
                   ciscoBulkFileStatusGroup }

    VARIATION    cbfDefineMaxFiles
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfDefineFiles
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfDefineHighFiles
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfDefineFilesRefused
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfDefineMaxObjects
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfDefineObjects
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfDefineHighObjects
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfDefineObjectsRefused
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

        VARIATION    cbfDefineFileName
        ACCESS       read-only
        DESCRIPTION "Write operation is not supported."

        VARIATION    cbfDefineFileStorage
        ACCESS       read-only
        DESCRIPTION "Write operation is not supported."

        VARIATION    cbfDefineFileFormat
        SYNTAX       INTEGER {
                         standardBER(1),
                         bulkBinary(2)
                     }
        ACCESS       read-only
        DESCRIPTION "Write operation is not supported.
                     Do not support bulkASCII(3)."

        VARIATION    cbfDefineFileEntryStatus
        ACCESS       read-only
        DESCRIPTION "Write operation is not supported."

    VARIATION    cbfDefineObjectClass
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfDefineObjectID
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfDefineObjectEntryStatus
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfStatusMaxFiles
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfStatusFiles
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfStatusHighFiles
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfStatusFilesBumped
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfStatusFileEntryStatus
    ACCESS         read-only
        DESCRIPTION "Write operation is not supported."
    ::= { ciscoBulkFileCapability 2 }


ciscoBulkFileCapabilityV3R00 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "MGX8850 Release 3.00,
                          BPX SES Release 3.00,
                          VXSM  Release 5.0.0."
    STATUS               current
    DESCRIPTION          "CISCO-BULK-FILE-MIB Capabilities."

    SUPPORTS CISCO-BULK-FILE-MIB
    INCLUDES { ciscoBulkFileDefineGroup,
                   ciscoBulkFileStatusGroup }

    VARIATION    cbfDefineMaxFiles
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfDefineFiles
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfDefineHighFiles
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfDefineFilesRefused
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfDefineMaxObjects
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfDefineObjects
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfDefineHighObjects
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfDefineObjectsRefused
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

        VARIATION    cbfDefineFileName
        ACCESS       read-only
        DESCRIPTION "Write operation is not supported."

        VARIATION    cbfDefineFileStorage
        ACCESS       read-only
        DESCRIPTION "Write operation is not supported."

        VARIATION    cbfDefineFileFormat
        SYNTAX       INTEGER {
                         variantBERWithCksum(4),
                         variantBinWithCksum(5)
                     }
        ACCESS       read-only
        DESCRIPTION "Write operation is not supported.
                     Do not support standardBER(1),
                     bulkBinary(2),bulkASCII(3)."

        VARIATION    cbfDefineFileEntryStatus
        ACCESS       read-only
        DESCRIPTION "Write operation is not supported."

    VARIATION    cbfDefineObjectClass
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfDefineObjectID
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfDefineObjectEntryStatus
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfStatusMaxFiles
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfStatusFiles
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfStatusHighFiles
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfStatusFilesBumped
    ACCESS         not-implemented
    DESCRIPTION  "Not supported."

    VARIATION    cbfStatusFileEntryStatus
    ACCESS         read-only
        DESCRIPTION "Write operation is not supported."
    ::= { ciscoBulkFileCapability 3 }

ciscoBulkFileCapCRS1V2R0 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "Cisco IOS XR 2.0 for CRS-1"
    STATUS               current
    DESCRIPTION          "CISCO-BULK-FILE-MIB Capabilities
                         for IOS XR release 2.0"

    SUPPORTS             CISCO-BULK-FILE-MIB
    INCLUDES             { ciscoBulkFileDefineGroupRev1,
                           ciscoBulkFileStatusGroup
                         }
    ::= { ciscoBulkFileCapability 4 }
END