#-MIBFILE: q-bridge.mib

Q-BRIDGE-MIB DEFINITIONS ::= BEGIN


DisplayString ::=
	OCTET STRING (SIZE(0..255))

PhysAddress ::=
	OCTET STRING

MacAddress ::=
	OCTET STRING (SIZE(6))

TruthValue ::=
	INTEGER {
	true(1),
	false(2)
	}

TestAndIncr ::=
	INTEGER (0..2147483647)

AutonomousType ::=
	OBJECT IDENTIFIER

InstancePointer ::=
	OBJECT IDENTIFIER

VariablePointer ::=
	OBJECT IDENTIFIER

RowPointer ::=
	OBJECT IDENTIFIER

RowStatus ::=
	INTEGER {
	active(1),
	notInService(2),
	notReady(3),
	createAndGo(4),
	createAndWait(5),
	destroy(6)
	}

TimeStamp ::=
	TimeTicks

TimeInterval ::=
	INTEGER (0..2147483647)

DateAndTime ::=
	OCTET STRING (SIZE(8|11))

StorageType ::=
	INTEGER {
	other(1),
	volatile(2),
	nonVolatile(3),
	permanent(4),
	readOnly(5)
	}

TDomain ::=
	OBJECT IDENTIFIER

TAddress ::=
	OCTET STRING (SIZE(1..255))

SnmpEngineID ::=
	OCTET STRING (SIZE(5..32))

SnmpSecurityModel ::=
	INTEGER (0..2147483647)

SnmpMessageProcessingModel ::=
	INTEGER (0..2147483647)

SnmpSecurityLevel ::=
	INTEGER {
	noAuthNoPriv(1),
	authNoPriv(2),
	authPriv(3)
	}

SnmpAdminString ::=
	OCTET STRING (SIZE(0..255))

BridgeId ::=
	OCTET STRING (SIZE(8))

Timeout ::=
	INTEGER

mib-2 OBJECT IDENTIFIER ::= { mgmt 1 }
dot1dBridge OBJECT IDENTIFIER ::= { mib-2 17 }
dot1dBridge OBJECT IDENTIFIER ::= { mib-2 17 }
dot1dBase OBJECT IDENTIFIER ::= { dot1dBridge 1 }
dot1dBasePortTable OBJECT IDENTIFIER ::= { dot1dBase 4 }
dot1dBasePortEntry OBJECT IDENTIFIER ::= { dot1dBasePortTable 1 }
dot1dBasePort OBJECT IDENTIFIER ::= { dot1dBasePortEntry 1 }
EnabledStatus ::=
	INTEGER {
	enabled(1),
	disabled(2)
	}

ZeroBasedCounter32 ::=
	Gauge

LastCreateTime ::=
	TimeTicks

TimeFilter ::=
	TimeTicks

DataSource ::=
	OBJECT IDENTIFIER

ControlString ::=
	DisplayString

PortList ::=
	OCTET STRING

VlanIndex ::=
	INTEGER

VlanId ::=
	INTEGER (1..4094)

qBridgeMIB OBJECT IDENTIFIER ::= { dot1dBridge 7 }

qBridgeMIBObjects OBJECT IDENTIFIER ::= { qBridgeMIB 1 }

dot1qBase OBJECT IDENTIFIER ::= { qBridgeMIBObjects 1 }

dot1qTp OBJECT IDENTIFIER ::= { qBridgeMIBObjects 2 }

dot1qStatic OBJECT IDENTIFIER ::= { qBridgeMIBObjects 3 }

dot1qVlan OBJECT IDENTIFIER ::= { qBridgeMIBObjects 4 }

dot1qVlanVersionNumber OBJECT-TYPE
	SYNTAX INTEGER {
	version1(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The version number of IEEE 802.1Q that this device
supports."
	::= { dot1qBase 1 }


dot1qMaxVlanId OBJECT-TYPE
	SYNTAX INTEGER (1..4094)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum IEEE 802.1Q VLAN ID that this device
supports."
	::= { dot1qBase 2 }


dot1qMaxSupportedVlans OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum number of IEEE 802.1Q VLANs that this
device supports."
	::= { dot1qBase 3 }


dot1qNumVlans OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current number of IEEE 802.1Q VLANs that are
configured in this device."
	::= { dot1qBase 4 }


dot1qGvrpStatus OBJECT-TYPE
	SYNTAX EnabledStatus
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The administrative status requested by management for
GVRP.  The value enabled(1) indicates that GVRP should
be enabled on this device, on all ports for which it has
not been specifically disabled.  When disabled(2), GVRP
is disabled on all ports and all GVRP packets will be
forwarded transparently.  This object affects all GVRP
Applicant and Registrar state machines.  A transition
from disabled(2) to enabled(1) will cause a reset of all
GVRP state machines on all ports."
	::= { dot1qBase 5 }


dot1qFdbTable OBJECT-TYPE
	SYNTAX SEQUENCE OF Dot1qFdbEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table that contains configuration and control
information for each Filtering Database currently
operating on this device.  Entries in this table appear
automatically when VLANs are assigned FDB IDs in the
dot1qVlanCurrentTable."
	::= { dot1qTp 1 }


dot1qFdbEntry OBJECT-TYPE
	SYNTAX Dot1qFdbEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Information about a specific Filtering Database."
	INDEX { dot1qFdbId  }

	::= { dot1qFdbTable 1 }

dot1qFdbEntry ::=
	SEQUENCE {
		dot1qFdbId Unsigned32,
		dot1qFdbDynamicCount Counter32
		}

dot1qFdbId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The identity of this Filtering Database."
	::= { dot1qFdbEntry 1 }


dot1qFdbDynamicCount OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current number of dynamic entries in this
Filtering Database."
	::= { dot1qFdbEntry 2 }


dot1qTpFdbTable OBJECT-TYPE
	SYNTAX SEQUENCE OF Dot1qTpFdbEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table that contains information about unicast entries
for which the device has forwarding and/or filtering
information.  This information is used by the
transparent bridging function in determining how to
propagate a received frame."
	::= { dot1qTp 2 }


dot1qTpFdbEntry OBJECT-TYPE
	SYNTAX Dot1qTpFdbEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Information about a specific unicast MAC address for
which the device has some forwarding and/or filtering
information."
	INDEX { dot1qFdbId , dot1qTpFdbAddress }

	::= { dot1qTpFdbTable 1 }

dot1qTpFdbEntry ::=
	SEQUENCE {
		dot1qTpFdbAddress MacAddress,
		dot1qTpFdbPort INTEGER,
		dot1qTpFdbStatus INTEGER
		}

dot1qTpFdbAddress OBJECT-TYPE
	SYNTAX MacAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A unicast MAC address for which the device has
forwarding and/or filtering information."
	::= { dot1qTpFdbEntry 1 }


dot1qTpFdbPort OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Either the value '0', or the port number of the port on
which a frame having a source address equal to the value
of the corresponding instance of dot1qTpFdbAddress has
been seen.  A value of '0' indicates that the port
number has not been learned but that the device does
have some forwarding/filtering information about this
address (e.g. in the dot1qStaticUnicastTable).
Implementors are encouraged to assign the port value to
this object whenever it is learned even for addresses
for which the corresponding value of dot1qTpFdbStatus is
not learned(3)."
	::= { dot1qTpFdbEntry 2 }


dot1qTpFdbStatus OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	invalid(2),
	learned(3),
	self(4),
	mgmt(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The status of this entry.  The meanings of the values
are:
other(1) - none of the following.  This may include
the case where some other MIB object (not the
corresponding instance of dot1qTpFdbPort, nor an
entry in the dot1qStaticUnicastTable) is being
used to determine if and how frames addressed to
the value of the corresponding instance of
dot1qTpFdbAddress are being forwarded.
invalid(2) - this entry is no longer valid (e.g., it
was learned but has since aged out), but has not
yet been flushed from the table.
learned(3) - the value of the corresponding instance
of dot1qTpFdbPort was learned and is being used.
self(4) - the value of the corresponding instance of
dot1qTpFdbAddress represents one of the device's
addresses.  The corresponding instance of
dot1qTpFdbPort indicates which of the device's
ports has this address.
mgmt(5) - the value of the corresponding instance of
dot1qTpFdbAddress is also the value of an
existing instance of dot1qStaticAddress."
	::= { dot1qTpFdbEntry 3 }


dot1qTpGroupTable OBJECT-TYPE
	SYNTAX SEQUENCE OF Dot1qTpGroupEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table containing filtering information for VLANs
configured into the bridge by (local or network)
management, or learnt dynamically, specifying the set of
ports to which frames received on a VLAN for this FDB
and containing a specific Group destination address are
allowed to be forwarded."
	::= { dot1qTp 3 }


dot1qTpGroupEntry OBJECT-TYPE
	SYNTAX Dot1qTpGroupEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Filtering information configured into the bridge by
management, or learnt dynamically, specifying the set of
ports to which frames received on a VLAN and containing
a specific Group destination address, are allowed to be
forwarded.  The subset of these ports learnt dynamically
is also provided."
	INDEX { dot1qVlanIndex , dot1qTpGroupAddress }

	::= { dot1qTpGroupTable 1 }

dot1qTpGroupEntry ::=
	SEQUENCE {
		dot1qTpGroupAddress MacAddress,
		dot1qTpGroupEgressPorts PortList,
		dot1qTpGroupLearnt PortList
		}

dot1qTpGroupAddress OBJECT-TYPE
	SYNTAX MacAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The destination Group MAC address in a frame to which
this entry's filtering information applies."
	::= { dot1qTpGroupEntry 1 }


dot1qTpGroupEgressPorts OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The complete set of ports, in this VLAN, to which
frames destined for this Group MAC address are currently
being explicitly forwarded.  This does not include ports
for which this address is only implicitly forwarded, in
the dot1qForwardAllPorts list."
	::= { dot1qTpGroupEntry 2 }


dot1qTpGroupLearnt OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The subset of ports in dot1qTpGroupEgressPorts which
were learnt by GMRP or some other dynamic mechanism, in
this Filtering database."
	::= { dot1qTpGroupEntry 3 }


dot1qForwardAllTable OBJECT-TYPE
	SYNTAX SEQUENCE OF Dot1qForwardAllEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table containing forwarding information for each
VLAN, specifying the set of ports to which forwarding of
all multicasts applies, configured statically by
management or dynamically by GMRP.  An entry appears in
this table for all VLANs that are currently
instantiated."
	::= { dot1qTp 4 }


dot1qForwardAllEntry OBJECT-TYPE
	SYNTAX Dot1qForwardAllEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Forwarding information for a VLAN, specifying the set
of ports to which all multicasts should be forwarded,
configured statically by management or dynamically by
GMRP."
	INDEX { dot1qVlanIndex  }

	::= { dot1qForwardAllTable 1 }

dot1qForwardAllEntry ::=
	SEQUENCE {
		dot1qForwardAllPorts PortList,
		dot1qForwardAllStaticPorts PortList,
		dot1qForwardAllForbiddenPorts PortList
		}

dot1qForwardAllPorts OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The complete set of ports in this VLAN to which all
multicast group-addressed frames are to be forwarded.
This includes ports for which this need has been
determined dynamically by GMRP, or configured statically
by management."
	::= { dot1qForwardAllEntry 1 }


dot1qForwardAllStaticPorts OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The set of ports configured by management in this VLAN
to which all multicast group-addressed frames are to be
forwarded.  Ports entered in this list will also appear
in the complete set shown by dot1qForwardAllPorts.  This
value will be restored after the device is reset.  This
only applies to ports that are members of the VLAN,
defined by dot1qVlanCurrentEgressPorts.  A port may not
be added in this set if it is already a member of the
set of ports in dot1qForwardAllForbiddenPorts.  The
default value is a string of ones of appropriate length,
to indicate standard non-EFS behaviour, i.e.  forward
all multicasts to all ports."
	::= { dot1qForwardAllEntry 2 }


dot1qForwardAllForbiddenPorts OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The set of ports configured by management in this VLAN
for which the Service Requirement attribute Forward All
Multicast Groups may not be dynamically registered by
GMRP.  This value will be restored after the device is
reset.  A port may not be added in this set if it is
already a member of the set of ports in
dot1qForwardAllStaticPorts.  The default value is a
string of zeros of appropriate length."
	::= { dot1qForwardAllEntry 3 }


dot1qForwardUnregisteredTable OBJECT-TYPE
	SYNTAX SEQUENCE OF Dot1qForwardUnregisteredEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table containing forwarding information for each
VLAN, specifying the set of ports to which forwarding of
multicast group-addressed frames for which there is no
more specific forwarding information applies.  This is
configured statically by management and determined
dynamically by GMRP.  An entry appears in this table for
all VLANs that are currently instantiated."
	::= { dot1qTp 5 }


dot1qForwardUnregisteredEntry OBJECT-TYPE
	SYNTAX Dot1qForwardUnregisteredEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Forwarding information for a VLAN, specifying the set
of ports to which all multicasts for which there is no
more specific forwarding information shall be forwarded.
This is configured statically by management or
dynamically by GMRP."
	INDEX { dot1qVlanIndex  }

	::= { dot1qForwardUnregisteredTable 1 }

dot1qForwardUnregisteredEntry ::=
	SEQUENCE {
		dot1qForwardUnregisteredPorts PortList,
		dot1qForwardUnregisteredStaticPorts PortList,
		dot1qForwardUnregisteredForbiddenPorts PortList
		}

dot1qForwardUnregisteredPorts OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The complete set of ports in this VLAN to which
multicast group-addressed frames for which there is no
more specific forwarding information will be forwarded.
This includes ports for which this need has been
determined dynamically by GMRP, or configured statically
by management."
	::= { dot1qForwardUnregisteredEntry 1 }


dot1qForwardUnregisteredStaticPorts OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The set of ports configured by management, in this
VLAN, to which multicast group-addressed frames for
which there is no more specific forwarding information
are to be forwarded.  Ports entered in this list will
also appear in the complete set shown by
dot1qForwardUnregisteredPorts.  This value will be
restored after the device is reset.  A port may not be
added in this set if it is already a member of the set
of ports in dot1qForwardUnregisteredForbiddenPorts.  The
default value is a string of zeros of appropriate
length, although this has no effect with the default
value of dot1qForwardAllStaticPorts."
	::= { dot1qForwardUnregisteredEntry 2 }


dot1qForwardUnregisteredForbiddenPorts OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The set of ports configured by management in this VLAN
for which the Service Requirement attribute Forward
Unregistered Multicast Groups may not be dynamically
registered by GMRP.  This value will be restored after
the device is reset.  A port may not be added in this
set if it is already a member of the set of ports in
dot1qForwardUnregisteredStaticPorts.  The default value
is a string of zeros of appropriate length."
	::= { dot1qForwardUnregisteredEntry 3 }


dot1qStaticUnicastTable OBJECT-TYPE
	SYNTAX SEQUENCE OF Dot1qStaticUnicastEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific unicast
destination addresses are allowed to be forwarded.  A
value of zero in this table as the port number from
which frames with a specific destination address are
received, is used to specify all ports for which there
is no specific entry in this table for that particular
destination address.  Entries are valid for unicast
addresses only."
	::= { dot1qStatic 1 }


dot1qStaticUnicastEntry OBJECT-TYPE
	SYNTAX Dot1qStaticUnicastEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from a specific port and
containing a specific unicast destination address are
allowed to be forwarded."
	INDEX { dot1qFdbId , dot1qStaticUnicastAddress, dot1qStaticUnicastReceivePort }

	::= { dot1qStaticUnicastTable 1 }

dot1qStaticUnicastEntry ::=
	SEQUENCE {
		dot1qStaticUnicastAddress MacAddress,
		dot1qStaticUnicastReceivePort INTEGER,
		dot1qStaticUnicastAllowedToGoTo PortList,
		dot1qStaticUnicastStatus INTEGER
		}

dot1qStaticUnicastAddress OBJECT-TYPE
	SYNTAX MacAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The destination MAC address in a frame to which this
entry's filtering information applies.  This object must
take the value of a unicast address."
	::= { dot1qStaticUnicastEntry 1 }


dot1qStaticUnicastReceivePort OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Either the value '0', or the port number of the port
from which a frame must be received in order for this
entry's filtering information to apply.  A value of zero
indicates that this entry applies on all ports of the
device for which there is no other applicable entry."
	::= { dot1qStaticUnicastEntry 2 }


dot1qStaticUnicastAllowedToGoTo OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The set of ports for which a frame with a specific
unicast address will be flooded in the event that it
has not been learned.  It also specifies the set of
ports a specific unicast address may be dynamically
learnt on.  The dot1qTpFdbTable will have an equivalent
entry with a dot1qTpFdbPort value of '0' until this
address has been learnt, when it will be updated with
the port the address has been seen on.  This only
applies to ports that are members of the VLAN, defined
by dot1qVlanCurrentEgressPorts.  The default value of
this object is a string of ones of appropriate length."
	::= { dot1qStaticUnicastEntry 3 }


dot1qStaticUnicastStatus OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	invalid(2),
	permanent(3),
	deleteOnReset(4),
	deleteOnTimeout(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object indicates the status of this entry.
other(1) - this entry is currently in use but
the conditions under which it will remain
so differ from the following values.
invalid(2) - writing this value to the object
removes the corresponding entry.
permanent(3) - this entry is currently in use
and will remain so after the next reset of
the bridge.
deleteOnReset(4) - this entry is currently in
use and will remain so until the next
reset of the bridge.
deleteOnTimeout(5) - this entry is currently in
use and will remain so until it is aged out."
	::= { dot1qStaticUnicastEntry 4 }


dot1qStaticMulticastTable OBJECT-TYPE
	SYNTAX SEQUENCE OF Dot1qStaticMulticastEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table containing filtering information for Multicast
and Broadcast MAC addresses for each VLAN, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific Multicast
and Broadcast destination addresses are allowed to be
forwarded.  A value of zero in this table as the port
number from which frames with a specific destination
address are received, is used to specify all ports for
which there is no specific entry in this table for that
particular destination address.  Entries are valid for
Multicast and Broadcast addresses only."
	::= { dot1qStatic 2 }


dot1qStaticMulticastEntry OBJECT-TYPE
	SYNTAX Dot1qStaticMulticastEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from this specific port
for this VLAN and containing this Multicast or Broadcast
destination address are allowed to be forwarded."
	INDEX { dot1qVlanIndex , dot1qStaticMulticastAddress, dot1qStaticMulticastReceivePort }

	::= { dot1qStaticMulticastTable 1 }

dot1qStaticMulticastEntry ::=
	SEQUENCE {
		dot1qStaticMulticastAddress MacAddress,
		dot1qStaticMulticastReceivePort INTEGER,
		dot1qStaticMulticastStaticEgressPorts PortList,
		dot1qStaticMulticastForbiddenEgressPorts PortList,
		dot1qStaticMulticastStatus INTEGER
		}

dot1qStaticMulticastAddress OBJECT-TYPE
	SYNTAX MacAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The destination MAC address in a frame to which this
entry's filtering information applies.  This object must
take the value of a Multicast or Broadcast address."
	::= { dot1qStaticMulticastEntry 1 }


dot1qStaticMulticastReceivePort OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Either the value '0', or the port number of the port
from which a frame must be received in order for this
entry's filtering information to apply.  A value of zero
indicates that this entry applies on all ports of the
device for which there is no other applicable entry."
	::= { dot1qStaticMulticastEntry 2 }


dot1qStaticMulticastStaticEgressPorts OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The set of ports to which frames received from a
specific port and destined for a specific Multicast or
Broadcast MAC address must be forwarded, regardless of
any dynamic information e.g. from GMRP.  A port may not
be added in this set if it is already a member of the
set of ports in dot1qStaticMulticastForbiddenEgressPorts.
The default value of this object is a string of ones of
appropriate length."
	::= { dot1qStaticMulticastEntry 3 }


dot1qStaticMulticastForbiddenEgressPorts OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The set of ports to which frames received from a
specific port and destined for a specific Multicast or
Broadcast MAC address must not be forwarded, regardless
of any dynamic information e.g. from GMRP.  A port may
not be added in this set if it is already a member of the
set of ports in dot1qStaticMulticastStaticEgressPorts.
The default value of this object is a string of zeros of
appropriate length."
	::= { dot1qStaticMulticastEntry 4 }


dot1qStaticMulticastStatus OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	invalid(2),
	permanent(3),
	deleteOnReset(4),
	deleteOnTimeout(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object indicates the status of this entry.
other(1) - this entry is currently in use but
the conditions under which it will remain
so differ from the following values.
invalid(2) - writing this value to the object
removes the corresponding entry.
permanent(3) - this entry is currently in use
and will remain so after the next reset of
the bridge.
deleteOnReset(4) - this entry is currently in
use and will remain so until the next
reset of the bridge.
deleteOnTimeout(5) - this entry is currently in
use and will remain so until it is aged out."
	::= { dot1qStaticMulticastEntry 5 }


dot1qVlanNumDeletes OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of times a VLAN entry has been deleted from
the dot1qVlanCurrentTable (for any reason).  If an entry
is deleted, then inserted, and then deleted, this
counter will be incremented by 2."
	::= { dot1qVlan 1 }


dot1qVlanCurrentTable OBJECT-TYPE
	SYNTAX SEQUENCE OF Dot1qVlanCurrentEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table containing current configuration information
for each VLAN currently configured into the device by
(local or network) management, or dynamically created
as a result of GVRP requests received."
	::= { dot1qVlan 2 }


dot1qVlanCurrentEntry OBJECT-TYPE
	SYNTAX Dot1qVlanCurrentEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Information for a VLAN configured into the device by
(local or network) management, or dynamically created
as a result of GVRP requests received."
	INDEX { dot1qVlanTimeMark , dot1qVlanIndex }

	::= { dot1qVlanCurrentTable 1 }

dot1qVlanCurrentEntry ::=
	SEQUENCE {
		dot1qVlanTimeMark TimeFilter,
		dot1qVlanIndex VlanIndex,
		dot1qVlanFdbId Unsigned32,
		dot1qVlanCurrentEgressPorts PortList,
		dot1qVlanCurrentUntaggedPorts PortList,
		dot1qVlanStatus INTEGER,
		dot1qVlanCreationTime TimeTicks
		}

dot1qVlanTimeMark OBJECT-TYPE
	SYNTAX TimeFilter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A TimeFilter for this entry.  See the TimeFilter
textual convention to see how this works."
	::= { dot1qVlanCurrentEntry 1 }


dot1qVlanIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The VLAN-ID or other identifier refering to this VLAN."
	::= { dot1qVlanCurrentEntry 2 }


dot1qVlanFdbId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Filtering Database used by this VLAN.  This is one
of the dot1qFdbId values in the dot1qFdbTable.  This
value is allocated automatically by the device whenever
the VLAN is created: either dynamically by GVRP, or by
management, in dot1qVlanStaticTable.  Allocation of this
value follows the learning constraints defined for this
VLAN in dot1qLearningConstraintsTable."
	::= { dot1qVlanCurrentEntry 3 }


dot1qVlanCurrentEgressPorts OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The set of ports which are transmitting traffic for
this VLAN as either tagged or untagged frames."
	::= { dot1qVlanCurrentEntry 4 }


dot1qVlanCurrentUntaggedPorts OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The set of ports which are transmitting traffic for
this VLAN as untagged frames."
	::= { dot1qVlanCurrentEntry 5 }


dot1qVlanStatus OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	permanent(2),
	dynamicGvrp(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object indicates the status of this entry.
other(1) - this entry is currently in use but the
conditions under which it will remain so differ
from the following values.
permanent(2) - this entry, corresponding to an entry
in dot1qVlanStaticTable, is currently in use and
will remain so after the next reset of the
device.  The port lists for this entry include
ports from the equivalent dot1qVlanStaticTable
entry and ports learnt dynamically.
dynamicGvrp(3) - this entry is currently in use
and will remain so until removed by GVRP.  There
is no static entry for this VLAN and it will be
removed when the last port leaves the VLAN."
	::= { dot1qVlanCurrentEntry 6 }


dot1qVlanCreationTime OBJECT-TYPE
	SYNTAX TimeTicks
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The value of sysUpTime when this VLAN was created."
	::= { dot1qVlanCurrentEntry 7 }


dot1qVlanStaticTable OBJECT-TYPE
	SYNTAX SEQUENCE OF Dot1qVlanStaticEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table containing static configuration information for
each VLAN configured into the device by (local or
network) management.  All entries are permanent and will
be restored after the device is reset."
	::= { dot1qVlan 3 }


dot1qVlanStaticEntry OBJECT-TYPE
	SYNTAX Dot1qVlanStaticEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Static information for a VLAN configured into the
device by (local or network) management."
	INDEX { dot1qVlanIndex  }

	::= { dot1qVlanStaticTable 1 }

dot1qVlanStaticEntry ::=
	SEQUENCE {
		dot1qVlanStaticName SnmpAdminString,
		dot1qVlanStaticEgressPorts PortList,
		dot1qVlanForbiddenEgressPorts PortList,
		dot1qVlanStaticUntaggedPorts PortList,
		dot1qVlanStaticRowStatus RowStatus
		}

dot1qVlanStaticName OBJECT-TYPE
	SYNTAX SnmpAdminString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An administratively assigned string, which may be used
to identify the VLAN."
	::= { dot1qVlanStaticEntry 1 }


dot1qVlanStaticEgressPorts OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The set of ports which are permanently assigned to the
egress list for this VLAN by management.  Changes to a
bit in this object affect the per-port per-VLAN
Registrar control for Registration Fixed for the
relevant GVRP state machine on each port.  A port may
not be added in this set if it is already a member of
the set of ports in dot1qVlanForbiddenEgressPorts.  The
default value of this object is a string of zeros of
appropriate length, indicating not fixed."
	::= { dot1qVlanStaticEntry 2 }


dot1qVlanForbiddenEgressPorts OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The set of ports which are prohibited by management
from being included in the egress list for this VLAN.
Changes to this object that cause a port to be included
or excluded affect the per-port per-VLAN Registrar
control for Registration Forbidden for the relevant GVRP
state machine on each port.  A port may not be added in
this set if it is already a member of the set of ports
in dot1qVlanStaticEgressPorts.  The default value of
this object is a string of zeros of appropriate length,
excluding all ports from the forbidden set."
	::= { dot1qVlanStaticEntry 3 }


dot1qVlanStaticUntaggedPorts OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The set of ports which should transmit egress packets
for this VLAN as untagged.  The default value of this
object for the default VLAN (dot1qVlanIndex = 1) is a string
of appropriate length including all ports.  There is no
specified default for other VLANs.  If a device agent cannot
support the set of ports being set then it will reject the
set operation with an error. An example might be if a
manager attempts to set more than one VLAN to be untagged
on egress where the device does not support this IEEE 802.1Q
option."
	::= { dot1qVlanStaticEntry 4 }


dot1qVlanStaticRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object indicates the status of this entry."
	::= { dot1qVlanStaticEntry 5 }


dot1qNextFreeLocalVlanIndex OBJECT-TYPE
	SYNTAX INTEGER (0|4096..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The next available value for dot1qVlanIndex of a local
VLAN entry in dot1qVlanStaticTable.  This will report
values >=4096 if a new Local VLAN may be created or else
the value 0 if this is not possible.
A row creation operation in this table for an entry with a local
VlanIndex value may fail if the current value of this object
is not used as the index. Even if the value read is used,
there is no guarantee that it will still be the valid index
when the create operation is attempted - another manager may
have already got in during the intervening time interval.
In this case, dot1qNextFreeLocalVlanIndex should be re-read
and the creation re-tried with the new value.

This value will automatically change when the current value is
used to create a new row."
	::= { dot1qVlan 4 }


dot1qPortVlanTable OBJECT-TYPE
	SYNTAX SEQUENCE OF Dot1qPortVlanEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table containing per port control and status
information for VLAN configuration in the device."
	::= { dot1qVlan 5 }


dot1qPortVlanEntry OBJECT-TYPE
	SYNTAX Dot1qPortVlanEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Information controlling VLAN configuration for a port
on the device.  This is indexed by dot1dBasePort."
	::= { dot1qPortVlanTable 1 }

dot1qPortVlanEntry ::=
	SEQUENCE {
		dot1qPvid VlanIndex,
		dot1qPortAcceptableFrameTypes INTEGER,
		dot1qPortIngressFiltering TruthValue,
		dot1qPortGvrpStatus EnabledStatus,
		dot1qPortGvrpFailedRegistrations Counter32,
		dot1qPortGvrpLastPduOrigin MacAddress
		}

dot1qPvid OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The PVID, the VLAN ID assigned to untagged frames or
Priority-Tagged frames received on this port."
	::= { dot1qPortVlanEntry 1 }


dot1qPortAcceptableFrameTypes OBJECT-TYPE
	SYNTAX INTEGER {
	admitAll(1),
	admitOnlyVlanTagged(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "When this is admitOnlyVlanTagged(2) the device will
discard untagged frames or Priority-Tagged frames
received on this port.  When admitAll(1), untagged
frames or Priority-Tagged frames received on this port
will be accepted and assigned to the PVID for this port.

This control does not affect VLAN independent BPDU
frames, such as GVRP and STP.  It does affect VLAN
dependent BPDU frames, such as GMRP."
	::= { dot1qPortVlanEntry 2 }


dot1qPortIngressFiltering OBJECT-TYPE
	SYNTAX TruthValue
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "When this is true(1) the device will discard incoming
frames for VLANs which do not include this Port in its
Member set.  When false(2), the port will accept all
incoming frames.

This control does not affect VLAN independent BPDU
frames, such as GVRP and STP.  It does affect VLAN
dependent BPDU frames, such as GMRP."
	::= { dot1qPortVlanEntry 3 }


dot1qPortGvrpStatus OBJECT-TYPE
	SYNTAX EnabledStatus
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The state of GVRP operation on this port.  The value
enabled(1) indicates that GVRP is enabled on this port,
as long as dot1qGvrpStatus is also enabled for this
device.  When disabled(2) but dot1qGvrpStatus is still
enabled for the device, GVRP is disabled on this port:
any GVRP packets received will be silently discarded and
no GVRP registrations will be propagated from other
ports.  This object affects all GVRP Applicant and
Registrar state machines on this port.  A transition
from disabled(2) to enabled(1) will cause a reset of all
GVRP state machines on this port."
	::= { dot1qPortVlanEntry 4 }


dot1qPortGvrpFailedRegistrations OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total number of failed GVRP registrations, for any
reason, on this port."
	::= { dot1qPortVlanEntry 5 }


dot1qPortGvrpLastPduOrigin OBJECT-TYPE
	SYNTAX MacAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Source MAC Address of the last GVRP message
received on this port."
	::= { dot1qPortVlanEntry 6 }


dot1qPortVlanStatisticsTable OBJECT-TYPE
	SYNTAX SEQUENCE OF Dot1qPortVlanStatisticsEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table containing per-port, per-VLAN statistics for
traffic received. Separate objects are provided for both the
most-significant and least-significant bits of statistics
counters for ports that are associated with this transparent
bridge. The most-significant bit objects are only required on
high capacity interfaces, as defined in the conformance clauses
for these objects. This mechanism is provided as a way to read
64-bit counters for agents which support only SNMPv1.

Note that the reporting of most-significant and least-
significant counter bits separately runs the risk of missing
an overflow of the lower bits in the interval between sampling.
The manager must be aware of this possibility, even within the
same varbindlist, when interpreting the results of a request or
asynchronous notification."
	::= { dot1qVlan 6 }


dot1qPortVlanStatisticsEntry OBJECT-TYPE
	SYNTAX Dot1qPortVlanStatisticsEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Traffic statistics for a VLAN on an interface."
	INDEX { dot1dBasePort , dot1qVlanIndex }

	::= { dot1qPortVlanStatisticsTable 1 }

dot1qPortVlanStatisticsEntry ::=
	SEQUENCE {
		dot1qTpVlanPortInFrames Counter32,
		dot1qTpVlanPortOutFrames Counter32,
		dot1qTpVlanPortInDiscards Counter32,
		dot1qTpVlanPortInOverflowFrames Counter32,
		dot1qTpVlanPortOutOverflowFrames Counter32,
		dot1qTpVlanPortInOverflowDiscards Counter32
		}

dot1qTpVlanPortInFrames OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of valid frames received by this port from
its segment which were classified as belonging to this
VLAN.  Note that a frame received on this port is
counted by this object if and only if it is for a
protocol being processed by the local forwarding process
for this VLAN.  This object includes received bridge
management frames classified as belonging to this VLAN
(e.g. GMRP, but not GVRP or STP)."
	::= { dot1qPortVlanStatisticsEntry 1 }


dot1qTpVlanPortOutFrames OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of valid frames transmitted by this port to
its segment from the local forwarding process for this
VLAN.  This includes bridge management frames originated
by this device which are classified as belonging to this
VLAN (e.g. GMRP, but not GVRP or STP)."
	::= { dot1qPortVlanStatisticsEntry 2 }


dot1qTpVlanPortInDiscards OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of valid frames received by this port from
its segment which were classified as belonging to this
VLAN which were discarded due to VLAN related reasons.
Specifically, the IEEE 802.1Q counters for Discard
Inbound and Discard on Ingress Filtering."
	::= { dot1qPortVlanStatisticsEntry 3 }


dot1qTpVlanPortInOverflowFrames OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of times the associated
dot1qTpVlanPortInFrames counter has overflowed."
	::= { dot1qPortVlanStatisticsEntry 4 }


dot1qTpVlanPortOutOverflowFrames OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of times the associated
dot1qTpVlanPortOutFrames counter has overflowed."
	::= { dot1qPortVlanStatisticsEntry 5 }


dot1qTpVlanPortInOverflowDiscards OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of times the associated
dot1qTpVlanPortInDiscards counter has overflowed."
	::= { dot1qPortVlanStatisticsEntry 6 }


dot1qPortVlanHCStatisticsTable OBJECT-TYPE
	SYNTAX SEQUENCE OF Dot1qPortVlanHCStatisticsEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table containing per port, per VLAN statistics for
traffic on high capacity interfaces."
	::= { dot1qVlan 7 }


dot1qPortVlanHCStatisticsEntry OBJECT-TYPE
	SYNTAX Dot1qPortVlanHCStatisticsEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Traffic statistics for a VLAN on a high capacity
interface."
	INDEX { dot1dBasePort , dot1qVlanIndex }

	::= { dot1qPortVlanHCStatisticsTable 1 }

dot1qPortVlanHCStatisticsEntry ::=
	SEQUENCE {
		dot1qTpVlanPortHCInFrames Counter64,
		dot1qTpVlanPortHCOutFrames Counter64,
		dot1qTpVlanPortHCInDiscards Counter64
		}

dot1qTpVlanPortHCInFrames OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of valid frames received by this port from
its segment which were classified as belonging to this
VLAN.  Note that a frame received on this port is
counted by this object if and only if it is for a
protocol being processed by the local forwarding process
for this VLAN.  This object includes received bridge
management frames classified as belonging to this VLAN
(e.g. GMRP, but not GVRP or STP)."
	::= { dot1qPortVlanHCStatisticsEntry 1 }


dot1qTpVlanPortHCOutFrames OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of valid frames transmitted by this port to
its segment from the local forwarding process for this
VLAN.  This includes bridge management frames originated
by this device which are classified as belonging to this
VLAN (e.g. GMRP, but not GVRP or STP)."
	::= { dot1qPortVlanHCStatisticsEntry 2 }


dot1qTpVlanPortHCInDiscards OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of valid frames received by this port from
its segment which were classified as belonging to this
VLAN which were discarded due to VLAN related reasons.
Specifically, the IEEE 802.1Q counters for Discard
Inbound and Discard on Ingress Filtering."
	::= { dot1qPortVlanHCStatisticsEntry 3 }


dot1qLearningConstraintsTable OBJECT-TYPE
	SYNTAX SEQUENCE OF Dot1qLearningConstraintsEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table containing learning constraints for sets of
Shared and Independendent VLANs."
	::= { dot1qVlan 8 }


dot1qLearningConstraintsEntry OBJECT-TYPE
	SYNTAX Dot1qLearningConstraintsEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A learning constraint defined for a VLAN."
	INDEX { dot1qConstraintVlan , dot1qConstraintSet }

	::= { dot1qLearningConstraintsTable 1 }

dot1qLearningConstraintsEntry ::=
	SEQUENCE {
		dot1qConstraintVlan VlanIndex,
		dot1qConstraintSet INTEGER,
		dot1qConstraintType INTEGER,
		dot1qConstraintStatus RowStatus
		}

dot1qConstraintVlan OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The index of the row in dot1qVlanCurrentTable for the
VLAN constrained by this entry."
	::= { dot1qLearningConstraintsEntry 1 }


dot1qConstraintSet OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The identity of the constraint set to which
dot1qConstraintVlan belongs.  These values may be chosen
by the management station."
	::= { dot1qLearningConstraintsEntry 2 }


dot1qConstraintType OBJECT-TYPE
	SYNTAX INTEGER {
	independent(1),
	shared(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The type of constraint this entry defines.
independent(1) - the VLAN, dot1qConstraintVlan,
uses an independent filtering database from all
other VLANs in the same set, defined by
dot1qConstraintSet.
shared(2) - the VLAN, dot1qConstraintVlan, shares
the same filtering database as all other VLANs
in the same set, defined by dot1qConstraintSet."
	::= { dot1qLearningConstraintsEntry 3 }


dot1qConstraintStatus OBJECT-TYPE
	SYNTAX RowStatus
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The status of this entry."
	::= { dot1qLearningConstraintsEntry 4 }


dot1qConstraintSetDefault OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The identity of the constraint set to which a VLAN
belongs, if there is not an explicit entry for that VLAN
in dot1qLearningConstraintsTable."
	::= { dot1qVlan 9 }


dot1qConstraintTypeDefault OBJECT-TYPE
	SYNTAX INTEGER {
	independent(1),
	shared(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The type of constraint set to which a VLAN belongs, if
there is not an explicit entry for that VLAN in
dot1qLearningConstraintsTable.  The types are as defined
for dot1qConstraintType."
	::= { dot1qVlan 10 }


qBridgeConformance OBJECT IDENTIFIER ::= { qBridgeMIB 2 }

qBridgeGroups OBJECT IDENTIFIER ::= { qBridgeConformance 1 }

qBridgeCompliances OBJECT IDENTIFIER ::= { qBridgeConformance 2 }

qBridgeBaseGroup OBJECT IDENTIFIER ::= { qBridgeGroups 1 }

qBridgeFdbUnicastGroup OBJECT IDENTIFIER ::= { qBridgeGroups 2 }

qBridgeFdbMulticastGroup OBJECT IDENTIFIER ::= { qBridgeGroups 3 }

qBridgeServiceRequirementsGroup OBJECT IDENTIFIER ::= { qBridgeGroups 4 }

qBridgeFdbStaticGroup OBJECT IDENTIFIER ::= { qBridgeGroups 5 }

qBridgeVlanGroup OBJECT IDENTIFIER ::= { qBridgeGroups 6 }

qBridgeVlanStaticGroup OBJECT IDENTIFIER ::= { qBridgeGroups 7 }

qBridgePortGroup OBJECT IDENTIFIER ::= { qBridgeGroups 8 }

qBridgeVlanStatisticsGroup OBJECT IDENTIFIER ::= { qBridgeGroups 9 }

qBridgeVlanStatisticsOverflowGroup OBJECT IDENTIFIER ::= { qBridgeGroups 10 }

qBridgeVlanHCStatisticsGroup OBJECT IDENTIFIER ::= { qBridgeGroups 11 }

qBridgeLearningConstraintsGroup OBJECT IDENTIFIER ::= { qBridgeGroups 12 }

qBridgeLearningConstraintDefaultGroup OBJECT IDENTIFIER ::= { qBridgeGroups 13 }

END