-- ***************************************************************** -- CISCO-DS1-CAPABILITY -- -- AGENT-CAPABILITIES MIB for DS1-MIB for CISCO Products -- -- December 2003, Yizhong Shen -- -- Copyright(c) 2002-2007 by Cisco Systems Inc. -- -- **************************************************************** CISCO-DS1-CAPABILITY DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI AGENT-CAPABILITIES FROM SNMPv2-CONF ciscoAgentCapability FROM CISCO-SMI DisplayString FROM SNMPv2-TC; ciscoDs1Capability MODULE-IDENTITY LAST-UPDATED "200710310000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com" DESCRIPTION "The agent capabilities for DS1-MIB for Cisco Products Series. - ciscoDs1AxsmeCapabilityV3R00 is for Enhanced ATM Switch Service Module(AXSM-E), and Enhanced Processor Switch Module 1(PXM1E) uplink. - ciscoDs1CapabilityV5R00 is for Voice Switch Service Module(VXSM) and MPSM Module Release 5.0.0." REVISION "200710310000Z" DESCRIPTION "Added VARIATION for dsx1LineStatusChangeTrapEnable to agent capability statement ciscoDs1CapabilityMARsV12R5T and ciscoDs1CapabilityAS5xxxV12R5T" REVISION "200709100000Z" DESCRIPTION "Added ciscoDs1CapabilityV5R500 for defining capability for VXSM support in MGX8880 release 5.5.0." REVISION "200705110000Z" DESCRIPTION "Added ciscoDs1CapabilityMARsV12R5T for 2800, 3800, 3700 series routers and IAD2430 platforms. Added ciscoDs1CapabilityAS5xxxV12R5T for AS5xxx platforms." REVISION "200606160000Z" DESCRIPTION "Added ciscoDs1CapabilityV5R310 for VXSM support in MGX8880 release 5.3.1." REVISION "200507110000Z" DESCRIPTION "Added ciscoDs1CapabilityV5R100 for MPSM and VXSM support in MGX8880 release 5.1.0." REVISION "200312220000Z" DESCRIPTION "ciscoDs1CapabilityV5R00 added for MPSM and VXSM support." REVISION "200204280000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoAgentCapability 273 } ciscoDs1AxsmeCapabilityV3R00 AGENT-CAPABILITIES PRODUCT-RELEASE "MGX8850 Release 3.0" STATUS current DESCRIPTION "DS1-MIB Capabilities." SUPPORTS DS1-MIB INCLUDES { ds1NearEndConfigGroup, ds1NearEndStatisticsGroup, ds1FarEndGroup } VARIATION dsx1LineType SYNTAX INTEGER { dsx1ESF(2), dsx1E1CRCMF(7) } ACCESS read-only DESCRIPTION "Supported with limitation. dsx1ESF(2) used only for T1 mode, dsx1E1CRCMF(7) used only for E1 mode." VARIATION dsx1LineCoding SYNTAX INTEGER { dsx1B8ZS(2), dsx1HDB3(3) } ACCESS read-only DESCRIPTION "Supported with limitation. dsx1B8ZS(2) used only for T1 mode, dsx1HDB3(3) used only for E1 mode." VARIATION dsx1SendCode ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1CircuitIdentifier ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1LoopbackConfig SYNTAX INTEGER { dsx1NoLoop(1), dsx1LineLoop(3), dsx1InwardLoop(5) } DESCRIPTION "Supported with limitation." VARIATION dsx1SignalMode ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1Fdl ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1LineStatusLastChange ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1LineStatusChangeTrapEnable ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1LoopbackStatus DESCRIPTION "The agent only sets following bits: 1 dsx1NoLoopback 16 dsx1NearEndInwardLoopback 64 dsx1FarEndLineLoopback." VARIATION dsx1Ds1ChannelNumber ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1Channelization ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1CurrentCSSs ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1CurrentBESs ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1CurrentDMs ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1IntervalCSSs ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1IntervalBESs ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1IntervalDMs ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1TotalCSSs ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1TotalBESs ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1TotalDMs ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1FarEndCurrentCSSs ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1FarEndCurrentBESs ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1FarEndCurrentDMs ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1FarEndIntervalCSSs ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1FarEndIntervalBESs ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1FarEndIntervalDMs ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1FarEndTotalCSSs ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1FarEndTotalBESs ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1FarEndTotalDMs ACCESS not-implemented DESCRIPTION "Not Supported." ::= { ciscoDs1Capability 1 } ciscoDs1CapabilityV5R00 AGENT-CAPABILITIES PRODUCT-RELEASE "MGX8850 Release 5.0.0" STATUS current DESCRIPTION "DS1 MIB capabilities for VXSM and MPSM in release 5.0.0" SUPPORTS DS1-MIB INCLUDES { ds1NearEndConfigGroup, ds1NearEndStatisticsGroup, ds1FarEndGroup, ds1NearEndOptionalConfigGroup } VARIATION dsx1LineCoding DESCRIPTION "Only supported by T1/E1 card (entPhysicalVendorType is cevVxsm48t1e1)." VARIATION dsx1LineLength SYNTAX INTEGER (0..200) DESCRIPTION "Supported with limited length only by T1/E1 card (entPhysicalVendorType is cevVxsm48t1e1), for T1 only." VARIATION dsx1CircuitIdentifier ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1LineStatusLastChange ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1Ds1ChannelNumber ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1LineMode DESCRIPTION "Only supported by T1/E1 card (entPhysicalVendorType is cevVxsm48t1e1), for T1 only." VARIATION dsx1LineBuildOut DESCRIPTION "Only supported by T1/E1 card (entPhysicalVendorType is cevVxsm48t1e1), for T1 only." VARIATION dsx1CurrentDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1IntervalDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1TotalDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1FarEndCurrentDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1FarEndIntervalDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1FarEndTotalDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1LineType SYNTAX INTEGER { dsx1ESF(2), dsx1D4(3), dsx1E1(4), dsx1E1CRC(5), dsx1E1MF(6), dsx1E1CRCMF(7), dsx1E1Q50(12), dsx1E1Q50CRC(13) } DESCRIPTION "Limited data values are supported. For T1, valid values are 2 and 3. For E1, valud values are 4..7, 12 and 13." VARIATION dsx1SendCode SYNTAX INTEGER { dsx1SendNoCode(1), dsx1SendLineCode(2), dsx1SendResetCode(4) } DESCRIPTION "dsx1SendPayloadCode(3), dsx1SendQRS(5), dsx1Send511Pattern(6), dsx1Send3in24Pattern(7), dsx1SendOtherTestPattern(8) are not supported on T1. This object is not supported on E1." VARIATION dsx1LoopbackConfig SYNTAX INTEGER { dsx1NoLoop(1), dsx1LineLoop(3), dsx1InwardLoop(5) } DESCRIPTION "dsx1PayloadLoop(2), dsx1OtherLoop(4), and dsx1DualLoop(6) are not supported." VARIATION dsx1LineStatus DESCRIPTION "dsx1OtherFailure (bit 4096) is used to indicate the line is in BERT testing." VARIATION dsx1SignalMode SYNTAX INTEGER { none(1), robbedBit(2), bitOriented(3), messageOriented(4) } DESCRIPTION "other(5) is not supported. For T1, valid values are 1, 2 and 4. For E1, valid values are 1, 3 and 4." VARIATION dsx1Fdl SYNTAX INTEGER (2) ACCESS read-only DESCRIPTION "Only dsx1AnsiT1403(2) is supported. Set is not allowed." VARIATION dsx1LineStatusChangeTrapEnable DEFVAL { enabled } DESCRIPTION "The initial value is enabled(1)." VARIATION dsx1Channelization SYNTAX INTEGER { enabledDs0(2) } ACCESS read-only DESCRIPTION "disabled(1) and enabledDs1(3) are not supported. Set is not allowed." VARIATION dsx1FarEndCurrentTable DESCRIPTION "It is not supported on E1." VARIATION dsx1FarEndIntervalTable DESCRIPTION "It is not supported on E1." VARIATION dsx1FarEndTotalTable DESCRIPTION "It is not supported on E1." ::= { ciscoDs1Capability 2 } ciscoDs1CapabilityV5R100 AGENT-CAPABILITIES PRODUCT-RELEASE "MGX8880 Release 5.1.0" STATUS current DESCRIPTION "DS1 MIB capabilities for VXSM and MPSM in release 5.1.0" SUPPORTS DS1-MIB INCLUDES { ds1NearEndConfigGroup, ds1NearEndStatisticsGroup, ds1FarEndGroup, ds1NearEndOptionalConfigGroup } VARIATION dsx1LineCoding DESCRIPTION "Only supported by T1/E1 card (entPhysicalVendorType is cevVxsm48t1e1)." VARIATION dsx1LineLength SYNTAX INTEGER (0..200) DESCRIPTION "Only supported by T1/E1 card (entPhysicalVendorType is cevVxsm48t1e1), for T1 only." VARIATION dsx1CircuitIdentifier ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1LineStatusLastChange ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1Ds1ChannelNumber ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1LineMode DESCRIPTION "Only supported by T1/E1 card (entPhysicalVendorType is cevVxsm48t1e1), for T1 only." VARIATION dsx1LineBuildOut DESCRIPTION "Only supported by T1/E1 card (entPhysicalVendorType is cevVxsm48t1e1), for T1 only." VARIATION dsx1CurrentDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1IntervalDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1TotalDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1FarEndCurrentDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1FarEndIntervalDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1FarEndTotalDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1LineType SYNTAX INTEGER { dsx1ESF(2), dsx1D4(3), dsx1E1(4), dsx1E1CRC(5), dsx1E1MF(6), dsx1E1CRCMF(7), dsx1E1Q50(12), dsx1E1Q50CRC(13) } DESCRIPTION "Limited data values are supported. For T1, valid values are 2 and 3. For E1, valud values are 4..7, 12 and 13." VARIATION dsx1SendCode SYNTAX INTEGER { dsx1SendNoCode(1), dsx1SendLineCode(2), dsx1SendResetCode(4) } DESCRIPTION "dsx1SendPayloadCode(3), dsx1SendQRS(5), dsx1Send511Pattern(6), dsx1Send3in24Pattern(7), dsx1SendOtherTestPattern(8) are not supported on T1. This object is not supported on E1." VARIATION dsx1LoopbackConfig SYNTAX INTEGER { dsx1NoLoop(1), dsx1LineLoop(3), dsx1InwardLoop(5) } DESCRIPTION "dsx1PayloadLoop(2), dsx1OtherLoop(4), and dsx1DualLoop(6) are not supported." VARIATION dsx1LineStatus DESCRIPTION "dsx1OtherFailure (bit 4096) is used to indicate the line is in BERT testing." VARIATION dsx1SignalMode SYNTAX INTEGER { none(1), robbedBit(2), bitOriented(3) } DESCRIPTION "other(5) is not supported. For T1, valid values are 1, and 2 For E1, valid values are 1, and 3." VARIATION dsx1Fdl SYNTAX INTEGER (2) ACCESS read-only DESCRIPTION "Only dsx1AnsiT1403(2) is supported. Set is not allowed." VARIATION dsx1LineStatusChangeTrapEnable DEFVAL { enabled } DESCRIPTION "The initial value is enabled(1)." VARIATION dsx1Channelization SYNTAX INTEGER { enabledDs0(2) } ACCESS read-only DESCRIPTION "disabled(1) and enabledDs1(3) are not supported. Set is not allowed." VARIATION dsx1FarEndCurrentTable DESCRIPTION "It is not supported on E1." VARIATION dsx1FarEndIntervalTable DESCRIPTION "It is not supported on E1." VARIATION dsx1FarEndTotalTable DESCRIPTION "It is not supported on E1." ::= { ciscoDs1Capability 3 } ciscoDs1CapabilityV5R310 AGENT-CAPABILITIES PRODUCT-RELEASE "MGX8880 Release 5.3.1" STATUS current DESCRIPTION "DS1 MIB capabilities for VXSM in release 5.3.1" SUPPORTS DS1-MIB INCLUDES { ds1NearEndConfigGroup, ds1NearEndStatisticsGroup, ds1FarEndGroup, ds1NearEndOptionalConfigGroup } VARIATION dsx1LineCoding DESCRIPTION "Only supported by T1/E1 card (entPhysicalVendorType is cevVxsm48t1e1)." VARIATION dsx1LineLength SYNTAX INTEGER (0..200) DESCRIPTION "Only supported by T1/E1 card (entPhysicalVendorType is cevVxsm48t1e1), for T1 only." VARIATION dsx1CircuitIdentifier ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1LineStatusLastChange ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1Ds1ChannelNumber ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1LineMode DESCRIPTION "Only supported by T1/E1 card (entPhysicalVendorType is cevVxsm48t1e1), for T1 only." VARIATION dsx1LineBuildOut DESCRIPTION "Only supported by T1/E1 card (entPhysicalVendorType is cevVxsm48t1e1), for T1 only." VARIATION dsx1CurrentDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1IntervalDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1TotalDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1FarEndCurrentDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1FarEndIntervalDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1FarEndTotalDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1LineType SYNTAX INTEGER { dsx1ESF(2), dsx1D4(3), dsx1E1(4), dsx1E1CRC(5), dsx1E1MF(6), dsx1E1CRCMF(7), dsx1E1Q50(12), dsx1E1Q50CRC(13) } DESCRIPTION "Limited data values are supported. For T1, valid values are 2 and 3. For E1, valud values are 4..7, 12 and 13." VARIATION dsx1SendCode SYNTAX INTEGER { dsx1SendNoCode(1), dsx1SendLineCode(2), dsx1SendResetCode(4) } DESCRIPTION "dsx1SendPayloadCode(3), dsx1SendQRS(5), dsx1Send511Pattern(6), dsx1Send3in24Pattern(7), dsx1SendOtherTestPattern(8) are not supported on T1. This object is not supported on E1." VARIATION dsx1LoopbackConfig SYNTAX INTEGER { dsx1NoLoop(1), dsx1LineLoop(3), dsx1InwardLoop(5) } DESCRIPTION "dsx1PayloadLoop(2), dsx1OtherLoop(4), and dsx1DualLoop(6) are not supported." VARIATION dsx1LineStatus DESCRIPTION "dsx1OtherFailure (bit 4096) is used to indicate the line is in BERT testing." VARIATION dsx1SignalMode SYNTAX INTEGER { none(1), robbedBit(2), bitOriented(3), other(5) } DESCRIPTION "other(5) is only supported at VXSM xGCP and T1. For T1, valid values are 1, 2 and 5 (xGCP only). For E1, valid values are 1 and 3." VARIATION dsx1Fdl SYNTAX INTEGER (2) ACCESS read-only DESCRIPTION "Only dsx1AnsiT1403(2) is supported. Set is not allowed." VARIATION dsx1LineStatusChangeTrapEnable DEFVAL { enabled } DESCRIPTION "The initial value is enabled(1)." VARIATION dsx1Channelization SYNTAX INTEGER { enabledDs0(2) } ACCESS read-only DESCRIPTION "disabled(1) and enabledDs1(3) are not supported. Set is not allowed." VARIATION dsx1FarEndCurrentTable DESCRIPTION "It is not supported on E1." VARIATION dsx1FarEndIntervalTable DESCRIPTION "It is not supported on E1." VARIATION dsx1FarEndTotalTable DESCRIPTION "It is not supported on E1." ::= { ciscoDs1Capability 4 } ciscoDs1CapabilityMARsV12R5T AGENT-CAPABILITIES PRODUCT-RELEASE "IOS 12.5T for Cisco Access Routers and ISRs" STATUS current DESCRIPTION "Agent capabilities for Cisco 3700 series routers, IAD2430 and 2800, 3800 Series Integrated Services Routers." SUPPORTS DS1-MIB INCLUDES { ds1NearEndConfigGroup, ds1NearEndStatisticsGroup } VARIATION dsx1LineType ACCESS read-only DESCRIPTION "Read only support is provided." VARIATION dsx1LineCoding ACCESS read-only DESCRIPTION "Read only support is provided." VARIATION dsx1SendCode ACCESS read-only DESCRIPTION "Read only support is provided." VARIATION dsx1CircuitIdentifier ACCESS read-only DESCRIPTION "Read only support is provided." VARIATION dsx1LoopbackConfig ACCESS read-only DESCRIPTION "Read only support is provided." VARIATION dsx1SignalMode ACCESS read-only DESCRIPTION "Read only support is provided." VARIATION dsx1TransmitClockSource ACCESS read-only DESCRIPTION "Read only support is provided." VARIATION dsx1Fdl ACCESS read-only DESCRIPTION "Read only support is provided." VARIATION dsx1LineLength ACCESS read-only DESCRIPTION "Configured length is shown if it is available. If length is not available then the value is 0. For example, length is not available for 'cablelength long' config" VARIATION dsx1LineStatusChangeTrapEnable ACCESS read-only DESCRIPTION "Read only support is provided." VARIATION dsx1Channelization ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1LineMode ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1LineBuildOut ACCESS not-implemented DESCRIPTION "Not Supported." ::= { ciscoDs1Capability 6 } ciscoDs1CapabilityAS5xxxV12R5T AGENT-CAPABILITIES PRODUCT-RELEASE "IOS 12.5T for Cisco Access Servers" STATUS current DESCRIPTION "Agent capabilities for Cisco AS5xxx routers." SUPPORTS DS1-MIB INCLUDES { ds1NearEndConfigGroup, ds1NearEndStatisticsGroup } VARIATION dsx1LineType ACCESS read-only DESCRIPTION "Read only support is provided." VARIATION dsx1LineCoding ACCESS read-only DESCRIPTION "Read only support is provided." VARIATION dsx1SendCode ACCESS read-only DESCRIPTION "Read only support is provided." VARIATION dsx1CircuitIdentifier ACCESS read-only DESCRIPTION "Read only support is provided." VARIATION dsx1LoopbackConfig ACCESS read-only DESCRIPTION "Read only support is provided." VARIATION dsx1SignalMode ACCESS read-only DESCRIPTION "Read only support is provided." VARIATION dsx1TransmitClockSource ACCESS read-only DESCRIPTION "Read only support is provided." VARIATION dsx1Fdl ACCESS read-only DESCRIPTION "Read only support is provided." VARIATION dsx1InvalidIntervals ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1LineLength ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1LineStatusChangeTrapEnable ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1LoopbackStatus ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1Ds1ChannelNumber ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1Channelization ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1LineMode ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1LineBuildOut ACCESS not-implemented DESCRIPTION "Not Supported." VARIATION dsx1IntervalValidData ACCESS not-implemented DESCRIPTION "Not Supported." ::= { ciscoDs1Capability 7 } ciscoDs1CapabilityV5R500 AGENT-CAPABILITIES PRODUCT-RELEASE "MGX8880 Release 5.5.0" STATUS current DESCRIPTION "DS1 MIB capabilities for VXSM in release 5.5.0." SUPPORTS DS1-MIB INCLUDES { ds1NearEndConfigGroup, ds1NearEndStatisticsGroup, ds1FarEndGroup, ds1NearEndOptionalConfigGroup } VARIATION dsx1LineCoding DESCRIPTION "Only supported by T1/E1 card (entPhysicalVendorType is cevVxsm48t1e1)." VARIATION dsx1LineLength SYNTAX INTEGER (0..200) DESCRIPTION "Supported with limited length only by T1/E1 card (entPhysicalVendorType is cevVxsm48t1e1), for T1 only." VARIATION dsx1CircuitIdentifier SYNTAX DisplayString (SIZE (1..64)) DESCRIPTION "Restricted length supported." VARIATION dsx1LineStatusLastChange ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1Ds1ChannelNumber ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1LineMode DESCRIPTION "Only supported by T1/E1 card (entPhysicalVendorType is cevVxsm48t1e1), for T1 only." VARIATION dsx1LineBuildOut DESCRIPTION "Only supported by T1/E1 card (entPhysicalVendorType is cevVxsm48t1e1), for T1 only." VARIATION dsx1CurrentDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1IntervalDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1TotalDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1FarEndCurrentDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1FarEndIntervalDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1FarEndTotalDMs ACCESS not-implemented DESCRIPTION "Not supported." VARIATION dsx1LineType SYNTAX INTEGER { dsx1ESF(2), dsx1D4(3), dsx1E1(4), dsx1E1CRC(5), dsx1E1MF(6), dsx1E1CRCMF(7), dsx1E1Q50(12), dsx1E1Q50CRC(13) } DESCRIPTION "Limited data values are supported. For T1, valid values are 2 and 3. For E1, valid values are 4..7, 12 and 13." VARIATION dsx1SendCode SYNTAX INTEGER { dsx1SendNoCode(1), dsx1SendLineCode(2), dsx1SendResetCode(4) } DESCRIPTION "Limited values are supported on T1: dsx1SendNoCode(1), dsx1SendLineCode(2), dsx1SendResetCode(4) This object is supported on DS1 interface and not supported on E1." VARIATION dsx1LoopbackConfig SYNTAX INTEGER { dsx1NoLoop(1), dsx1LineLoop(3), dsx1InwardLoop(5) } DESCRIPTION "Limited values are supported: dsx1NoLoop(1), dsx1LineLoop(3), dsx1InwardLoop(5)" VARIATION dsx1LineStatus DESCRIPTION "dsx1OtherFailure (value 4096) is used to indicate the line is in BERT testing." VARIATION dsx1SignalMode SYNTAX INTEGER { none(1), robbedBit(2), bitOriented(3), other(5) } DESCRIPTION "other(5) is only supported at VXSM xGCP and T1. For T1, valid values are 1, 2 and 5 (xGCP only). For E1, valid values are 1 and 3." VARIATION dsx1Fdl SYNTAX INTEGER (2) ACCESS read-only DESCRIPTION "Only dsx1AnsiT1403(2) is supported. Set is not allowed." VARIATION dsx1LineStatusChangeTrapEnable DEFVAL { enabled } DESCRIPTION "The default value is enabled(1)." VARIATION dsx1Channelization SYNTAX INTEGER { enabledDs0(2) } ACCESS read-only DESCRIPTION "Limited values are supported: enabledDs0(2) Set is not allowed." VARIATION dsx1FarEndCurrentTable DESCRIPTION "It is not supported on E1." VARIATION dsx1FarEndIntervalTable DESCRIPTION "It is not supported on E1." VARIATION dsx1FarEndTotalTable DESCRIPTION "It is not supported on E1." ::= { ciscoDs1Capability 8 } END