#-MIBFILE: nsaasr.mib HPNSAASR-MIB DEFINITIONS ::= BEGIN DisplayString ::= OCTET STRING PhysAddress ::= OCTET STRING hp OBJECT IDENTIFIER ::= { enterprises 11 } nm OBJECT IDENTIFIER ::= { hp 2 } hpnsa OBJECT IDENTIFIER ::= { nm 23 } hpnsaASR OBJECT IDENTIFIER ::= { hpnsa 25 } hpnsaASRMibRev OBJECT IDENTIFIER ::= { hpnsaASR 1 } hpnsaASRParms OBJECT IDENTIFIER ::= { hpnsaASR 2 } hpnsaASRMibRevMajor OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The major revision level of the MIB." ::= { hpnsaASRMibRev 1 } hpnsaASRMibRevMinor OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The minor revision level of the MIB." ::= { hpnsaASRMibRev 2 } hpnsaASRMaxConsecutiveASR OBJECT-TYPE SYNTAX INTEGER (0..10) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the maximum number of consecutive ASR reboot allowed in this system, if exceeding this value, no ASR will be performed. 0 means no limit on maximum number of reboots, 1-10 for setting a limit" ::= { hpnsaASRParms 1 } hpnsaASRCurrentConsecutiveASR OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current value of the number of consecutive ASR reboot happened so far." ::= { hpnsaASRParms 2 } hpnsaASRTimeOutInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Time out interval used for ASR reboot, if the timer is not reset/kicked during this interval, system will reboot" ::= { hpnsaASRParms 3 } hpnsaASRKickInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " This is the fixed interval used to reset/kick the ASR watchdog timer to avoid the expiration of the timer which will trigger ASR" ::= { hpnsaASRParms 4 } hpnsaASRTimeoutAction OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the action that will be executed when the ASR timeout occurs, it can be no action - only logging, hard reset, or power cycle" ::= { hpnsaASRParms 5 } END