#-MIBFILE: host-resources-mib.mib

HOST-RESOURCES-MIB DEFINITIONS ::= BEGIN


Counter-32 ::=
	Counter

Gauge-32 ::=
	Gauge

Integer-32 ::=
	INTEGER (-2147483648..2147483647)

Unsigned-32 ::=
	Gauge

mib-2 OBJECT IDENTIFIER ::= { mgmt 1 }
DisplayString ::=
	OCTET STRING (SIZE(0..255))

PhysAddress ::=
	OCTET STRING

MacAddress ::=
	OCTET STRING (SIZE(6))

TruthValue ::=
	INTEGER {
	true(1),
	false(2)
	}

TestAndIncr ::=
	INTEGER (0..2147483647)

AutonomousType ::=
	OBJECT IDENTIFIER

InstancePointer ::=
	OBJECT IDENTIFIER

RowStatus ::=
	INTEGER {
	active(1),
	notInService(2),
	notReady(3),
	createAndGo(4),
	createAndWait(5),
	destroy(6)
	}

TimeStamp ::=
	TimeTicks

TimeInterval ::=
	INTEGER (0..2147483647)

DateAndTime ::=
	OCTET STRING (SIZE(8|11))

OwnerString ::=
	OCTET STRING (SIZE(0..255))

InterfaceIndex ::=
	INTEGER (1..2147483647)

InterfaceIndexOrZero ::=
	INTEGER (0..2147483647)

KBytes ::=
	INTEGER (0..2147483647)

ProductID ::=
	OBJECT IDENTIFIER

InternationalDisplayString ::=
	OCTET STRING

host OBJECT IDENTIFIER ::= { mib-2 25 }

hrMIBAdminInfo OBJECT IDENTIFIER ::= { host 7 }

hostResourcesMibModule OBJECT IDENTIFIER ::= { hrMIBAdminInfo 1 }

hrSystem OBJECT IDENTIFIER ::= { host 1 }

hrStorage OBJECT IDENTIFIER ::= { host 2 }

hrDevice OBJECT IDENTIFIER ::= { host 3 }

hrSWRun OBJECT IDENTIFIER ::= { host 4 }

hrSWRunPerf OBJECT IDENTIFIER ::= { host 5 }

hrSWInstalled OBJECT IDENTIFIER ::= { host 6 }

hrStorageTypes OBJECT IDENTIFIER ::= { hrStorage 1 }

hrDeviceTypes OBJECT IDENTIFIER ::= { hrDevice 1 }

hrFSTypes OBJECT IDENTIFIER ::= { hrDevice 9 }

hrMIBCompliances OBJECT IDENTIFIER ::= { hrMIBAdminInfo 2 }

hrMIBGroups OBJECT IDENTIFIER ::= { hrMIBAdminInfo 3 }

hrSystemUptime OBJECT-TYPE
	SYNTAX TimeTicks
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The amount of time since this host was last
initialized.  Note that this is different from
sysUpTime in the SNMPv2-MIB [RFC1907] because
sysUpTime is the uptime of the network management
portion of the system."
	::= { hrSystem 1 }


hrSystemDate OBJECT-TYPE
	SYNTAX DateAndTime
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The host's notion of the local date and time of day."
	::= { hrSystem 2 }


hrSystemInitialLoadDevice OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The index of the hrDeviceEntry for the device from
which this host is configured to load its initial
operating system configuration (i.e., which operating
system code and/or boot parameters).

Note that writing to this object just changes the
configuration that will be used the next time the
operating system is loaded and does not actually cause
the reload to occur."
	::= { hrSystem 3 }


hrSystemInitialLoadParameters OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..128))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object contains the parameters (e.g. a pathname
and parameter) supplied to the load device when
requesting the initial operating system configuration
from that device.

Note that writing to this object just changes the
configuration that will be used the next time the
operating system is loaded and does not actually cause
the reload to occur."
	::= { hrSystem 4 }


hrSystemNumUsers OBJECT-TYPE
	SYNTAX Gauge
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of user sessions for which this host is
storing state information.  A session is a collection
of processes requiring a single act of user
authentication and possibly subject to collective job
control."
	::= { hrSystem 5 }


hrSystemProcesses OBJECT-TYPE
	SYNTAX Gauge
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of process contexts currently loaded or
running on this system."
	::= { hrSystem 6 }


hrSystemMaxProcesses OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum number of process contexts this system
can support.  If there is no fixed maximum, the value
should be zero.  On systems that have a fixed maximum,
this object can help diagnose failures that occur when
this maximum is reached."
	::= { hrSystem 7 }


hrMemorySize OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The amount of physical read-write main memory,
typically RAM, contained by the host."
	::= { hrStorage 2 }


hrStorageTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HrStorageEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The (conceptual) table of logical storage areas on
the host.

An entry shall be placed in the storage table for each
logical area of storage that is allocated and has
fixed resource limits.  The amount of storage
represented in an entity is the amount actually usable
by the requesting entity, and excludes loss due to
formatting or file system reference information.

These entries are associated with logical storage
areas, as might be seen by an application, rather than
physical storage entities which are typically seen by
an operating system.  Storage such as tapes and
floppies without file systems on them are typically
not allocated in chunks by the operating system to
requesting applications, and therefore shouldn't
appear in this table.  Examples of valid storage for
this table include disk partitions, file systems, ram
(for some architectures this is further segmented into
regular memory, extended memory, and so on), backing
store for virtual memory (`swap space').

This table is intended to be a useful diagnostic for
`out of memory' and `out of buffers' types of
failures.  In addition, it can be a useful performance
monitoring tool for tracking memory, disk, or buffer
usage."
	::= { hrStorage 3 }


hrStorageEntry OBJECT-TYPE
	SYNTAX HrStorageEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A (conceptual) entry for one logical storage area on
the host.  As an example, an instance of the
hrStorageType object might be named hrStorageType.3"
	INDEX { hrStorageIndex  }

	::= { hrStorageTable 1 }

hrStorageEntry ::=
	SEQUENCE {
		hrStorageIndex INTEGER,
		hrStorageType AutonomousType,
		hrStorageDescr DisplayString,
		hrStorageAllocationUnits INTEGER,
		hrStorageSize INTEGER,
		hrStorageUsed INTEGER,
		hrStorageAllocationFailures Counter
		}

hrStorageIndex OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A unique value for each logical storage area
contained by the host."
	::= { hrStorageEntry 1 }


hrStorageType OBJECT-TYPE
	SYNTAX AutonomousType
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The type of storage represented by this entry."
	::= { hrStorageEntry 2 }


hrStorageDescr OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A description of the type and instance of the storage
described by this entry."
	::= { hrStorageEntry 3 }


hrStorageAllocationUnits OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The size, in bytes, of the data objects allocated
from this pool.  If this entry is monitoring sectors,
blocks, buffers, or packets, for example, this number
will commonly be greater than one.  Otherwise this
number will typically be one."
	::= { hrStorageEntry 4 }


hrStorageSize OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The size of the storage represented by this entry, in
units of hrStorageAllocationUnits. This object is
writable to allow remote configuration of the size of
the storage area in those cases where such an
operation makes sense and is possible on the
underlying system. For example, the amount of main
memory allocated to a buffer pool might be modified or
the amount of disk space allocated to virtual memory
might be modified."
	::= { hrStorageEntry 5 }


hrStorageUsed OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The amount of the storage represented by this entry
that is allocated, in units of
hrStorageAllocationUnits."
	::= { hrStorageEntry 6 }


hrStorageAllocationFailures OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of requests for storage represented by
this entry that could not be honored due to not enough
storage.  It should be noted that as this object has a
SYNTAX of Counter32, that it does not have a defined
initial value.  However, it is recommended that this
object be initialized to zero, even though management
stations must not depend on such an initialization."
	::= { hrStorageEntry 7 }


hrDeviceTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HrDeviceEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The (conceptual) table of devices contained by the
host."
	::= { hrDevice 2 }


hrDeviceEntry OBJECT-TYPE
	SYNTAX HrDeviceEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A (conceptual) entry for one device contained by the
host.  As an example, an instance of the hrDeviceType
object might be named hrDeviceType.3"
	INDEX { hrDeviceIndex  }

	::= { hrDeviceTable 1 }

hrDeviceEntry ::=
	SEQUENCE {
		hrDeviceIndex INTEGER,
		hrDeviceType AutonomousType,
		hrDeviceDescr DisplayString,
		hrDeviceID ProductID,
		hrDeviceStatus INTEGER,
		hrDeviceErrors Counter
		}

hrDeviceIndex OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A unique value for each device contained by the host.
The value for each device must remain constant at
least from one re-initialization of the agent to the
next re-initialization."
	::= { hrDeviceEntry 1 }


hrDeviceType OBJECT-TYPE
	SYNTAX AutonomousType
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An indication of the type of device.

If this value is
`hrDeviceProcessor { hrDeviceTypes 3 }' then an entry
exists in the hrProcessorTable which corresponds to
this device.

If this value is
`hrDeviceNetwork { hrDeviceTypes 4 }', then an entry
exists in the hrNetworkTable which corresponds to this
device.

If this value is
`hrDevicePrinter { hrDeviceTypes 5 }', then an entry
exists in the hrPrinterTable which corresponds to this
device.

If this value is
`hrDeviceDiskStorage { hrDeviceTypes 6 }', then an
entry exists in the hrDiskStorageTable which
corresponds to this device."
	::= { hrDeviceEntry 2 }


hrDeviceDescr OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..64))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A textual description of this device, including the
device's manufacturer and revision, and optionally,
its serial number."
	::= { hrDeviceEntry 3 }


hrDeviceID OBJECT-TYPE
	SYNTAX OBJECT IDENTIFIER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The product ID for this device."
	::= { hrDeviceEntry 4 }


hrDeviceStatus OBJECT-TYPE
	SYNTAX INTEGER {
	unknown(1),
	running(2),
	warning(3),
	testing(4),
	down(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current operational state of the device described
by this row of the table.  A value unknown(1)
indicates that the current state of the device is
unknown.  running(2) indicates that the device is up
and running and that no unusual error conditions are
known.  The warning(3) state indicates that agent has
been informed of an unusual error condition by the
operational software (e.g., a disk device driver) but
that the device is still 'operational'.  An example
would be a high number of soft errors on a disk.  A
value of testing(4), indicates that the device is not
available for use because it is in the testing state.
The state of down(5) is used only when the agent has
been informed that the device is not available for any
use."
	::= { hrDeviceEntry 5 }


hrDeviceErrors OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of errors detected on this device.  It
should be noted that as this object has a SYNTAX of
Counter32, that it does not have a defined initial
value.  However, it is recommended that this object be
initialized to zero, even though management stations
must not depend on such an initialization."
	::= { hrDeviceEntry 6 }


hrProcessorTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HrProcessorEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The (conceptual) table of processors contained by the
host.

Note that this table is potentially sparse: a
(conceptual) entry exists only if the correspondent
value of the hrDeviceType object is
`hrDeviceProcessor'."
	::= { hrDevice 3 }


hrProcessorEntry OBJECT-TYPE
	SYNTAX HrProcessorEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A (conceptual) entry for one processor contained by
the host.  The hrDeviceIndex in the index represents
the entry in the hrDeviceTable that corresponds to the
hrProcessorEntry.

As an example of how objects in this table are named,
an instance of the hrProcessorFrwID object might be
named hrProcessorFrwID.3"
	INDEX { hrDeviceIndex  }

	::= { hrProcessorTable 1 }

hrProcessorEntry ::=
	SEQUENCE {
		hrProcessorFrwID ProductID,
		hrProcessorLoad INTEGER
		}

hrProcessorFrwID OBJECT-TYPE
	SYNTAX OBJECT IDENTIFIER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The product ID of the firmware associated with the
processor."
	::= { hrProcessorEntry 1 }


hrProcessorLoad OBJECT-TYPE
	SYNTAX INTEGER (0..100)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The average, over the last minute, of the percentage
of time that this processor was not idle.
Implementations may approximate this one minute
smoothing period if necessary."
	::= { hrProcessorEntry 2 }


hrNetworkTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HrNetworkEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The (conceptual) table of network devices contained
by the host.

Note that this table is potentially sparse: a
(conceptual) entry exists only if the correspondent
value of the hrDeviceType object is
`hrDeviceNetwork'."
	::= { hrDevice 4 }


hrNetworkEntry OBJECT-TYPE
	SYNTAX HrNetworkEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A (conceptual) entry for one network device contained
by the host.  The hrDeviceIndex in the index
represents the entry in the hrDeviceTable that
corresponds to the hrNetworkEntry.

As an example of how objects in this table are named,
an instance of the hrNetworkIfIndex object might be
named hrNetworkIfIndex.3"
	INDEX { hrDeviceIndex  }

	::= { hrNetworkTable 1 }

hrNetworkEntry ::=
	SEQUENCE {
		hrNetworkIfIndex InterfaceIndexOrZero
		}

hrNetworkIfIndex OBJECT-TYPE
	SYNTAX InterfaceIndexOrZero
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The value of ifIndex which corresponds to this
network device. If this device is not represented in
the ifTable, then this value shall be zero."
	::= { hrNetworkEntry 1 }


hrPrinterTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HrPrinterEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The (conceptual) table of printers local to the host.

Note that this table is potentially sparse: a
(conceptual) entry exists only if the correspondent
value of the hrDeviceType object is
`hrDevicePrinter'."
	::= { hrDevice 5 }


hrPrinterEntry OBJECT-TYPE
	SYNTAX HrPrinterEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A (conceptual) entry for one printer local to the
host.  The hrDeviceIndex in the index represents the
entry in the hrDeviceTable that corresponds to the
hrPrinterEntry.

As an example of how objects in this table are named,
an instance of the hrPrinterStatus object might be
named hrPrinterStatus.3"
	INDEX { hrDeviceIndex  }

	::= { hrPrinterTable 1 }

hrPrinterEntry ::=
	SEQUENCE {
		hrPrinterStatus INTEGER,
		hrPrinterDetectedErrorState OCTET STRING
		}

hrPrinterStatus OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	unknown(2),
	idle(3),
	printing(4),
	warmup(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current status of this printer device."
	::= { hrPrinterEntry 1 }


hrPrinterDetectedErrorState OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object represents any error conditions detected
by the printer.  The error conditions are encoded as
bits in an octet string, with the following
definitions:

Condition         Bit #

lowPaper              0

noPaper               1
lowToner              2
noToner               3
doorOpen              4
jammed                5
offline               6
serviceRequested      7
inputTrayMissing      8
outputTrayMissing     9
markerSupplyMissing  10
outputNearFull       11
outputFull           12
inputTrayEmpty       13
overduePreventMaint  14

Bits are numbered starting with the most significant
bit of the first byte being bit 0, the least
significant bit of the first byte being bit 7, the
most significant bit of the second byte being bit 8,
and so on.  A one bit encodes that the condition was
detected, while a zero bit encodes that the condition
was not detected.

This object is useful for alerting an operator to
specific warning or error conditions that may occur,
especially those requiring human intervention."
	::= { hrPrinterEntry 2 }


hrDiskStorageTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HrDiskStorageEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The (conceptual) table of long-term storage devices
contained by the host.  In particular, disk devices
accessed remotely over a network are not included
here.

Note that this table is potentially sparse: a
(conceptual) entry exists only if the correspondent
value of the hrDeviceType object is
`hrDeviceDiskStorage'."
	::= { hrDevice 6 }


hrDiskStorageEntry OBJECT-TYPE
	SYNTAX HrDiskStorageEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A (conceptual) entry for one long-term storage device
contained by the host.  The hrDeviceIndex in the index
represents the entry in the hrDeviceTable that
corresponds to the hrDiskStorageEntry. As an example,
an instance of the hrDiskStorageCapacity object might
be named hrDiskStorageCapacity.3"
	INDEX { hrDeviceIndex  }

	::= { hrDiskStorageTable 1 }

hrDiskStorageEntry ::=
	SEQUENCE {
		hrDiskStorageAccess INTEGER,
		hrDiskStorageMedia INTEGER,
		hrDiskStorageRemoveble TruthValue,
		hrDiskStorageCapacity KBytes
		}

hrDiskStorageAccess OBJECT-TYPE
	SYNTAX INTEGER {
	readWrite(1),
	readOnly(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An indication if this long-term storage device is
readable and writable or only readable.  This should
reflect the media type, any write-protect mechanism,
and any device configuration that affects the entire
device."
	::= { hrDiskStorageEntry 1 }


hrDiskStorageMedia OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	unknown(2),
	hardDisk(3),
	floppyDisk(4),
	opticalDiskROM(5),
	opticalDiskWORM(6),
	opticalDiskRW(7),
	ramDisk(8)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An indication of the type of media used in this long-
term storage device."
	::= { hrDiskStorageEntry 2 }


hrDiskStorageRemoveble OBJECT-TYPE
	SYNTAX TruthValue
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Denotes whether or not the disk media may be removed
from the drive."
	::= { hrDiskStorageEntry 3 }


hrDiskStorageCapacity OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total size for this long-term storage device. If
the media is removable and is currently removed, this
value should be zero."
	::= { hrDiskStorageEntry 4 }


hrPartitionTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HrPartitionEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The (conceptual) table of partitions for long-term
storage devices contained by the host.  In particular,
partitions accessed remotely over a network are not
included here."
	::= { hrDevice 7 }


hrPartitionEntry OBJECT-TYPE
	SYNTAX HrPartitionEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A (conceptual) entry for one partition.  The
hrDeviceIndex in the index represents the entry in the
hrDeviceTable that corresponds to the
hrPartitionEntry.

As an example of how objects in this table are named,
an instance of the hrPartitionSize object might be
named hrPartitionSize.3.1"
	INDEX { hrDeviceIndex , hrPartitionIndex }

	::= { hrPartitionTable 1 }

hrPartitionEntry ::=
	SEQUENCE {
		hrPartitionIndex INTEGER,
		hrPartitionLabel InternationalDisplayString,
		hrPartitionID OCTET STRING,
		hrPartitionSize KBytes,
		hrPartitionFSIndex INTEGER
		}

hrPartitionIndex OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A unique value for each partition on this long-term
storage device.  The value for each long-term storage
device must remain constant at least from one re-
initialization of the agent to the next re-
initialization."
	::= { hrPartitionEntry 1 }


hrPartitionLabel OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..128))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A textual description of this partition."
	::= { hrPartitionEntry 2 }


hrPartitionID OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A descriptor which uniquely represents this partition
to the responsible operating system.  On some systems,
this might take on a binary representation."
	::= { hrPartitionEntry 3 }


hrPartitionSize OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The size of this partition."
	::= { hrPartitionEntry 4 }


hrPartitionFSIndex OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The index of the file system mounted on this
partition.  If no file system is mounted on this
partition, then this value shall be zero.  Note that
multiple partitions may point to one file system,
denoting that that file system resides on those
partitions.  Multiple file systems may not reside on
one partition."
	::= { hrPartitionEntry 5 }


hrFSTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HrFSEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The (conceptual) table of file systems local to this
host or remotely mounted from a file server.  File
systems that are in only one user's environment on a
multi-user system will not be included in this table."
	::= { hrDevice 8 }


hrFSEntry OBJECT-TYPE
	SYNTAX HrFSEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A (conceptual) entry for one file system local to
this host or remotely mounted from a file server.
File systems that are in only one user's environment
on a multi-user system will not be included in this
table.

As an example of how objects in this table are named,
an instance of the hrFSMountPoint object might be
named hrFSMountPoint.3"
	INDEX { hrFSIndex  }

	::= { hrFSTable 1 }

hrFSEntry ::=
	SEQUENCE {
		hrFSIndex INTEGER,
		hrFSMountPoint InternationalDisplayString,
		hrFSRemoteMountPoint InternationalDisplayString,
		hrFSType AutonomousType,
		hrFSAccess INTEGER,
		hrFSBootable TruthValue,
		hrFSStorageIndex INTEGER,
		hrFSLastFullBackupDate DateAndTime,
		hrFSLastPartialBackupDate DateAndTime
		}

hrFSIndex OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A unique value for each file system local to this
host.  The value for each file system must remain
constant at least from one re-initialization of the
agent to the next re-initialization."
	::= { hrFSEntry 1 }


hrFSMountPoint OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..128))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The path name of the root of this file system."
	::= { hrFSEntry 2 }


hrFSRemoteMountPoint OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..128))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A description of the name and/or address of the
server that this file system is mounted from.  This
may also include parameters such as the mount point on
the remote file system.  If this is not a remote file
system, this string should have a length of zero."
	::= { hrFSEntry 3 }


hrFSType OBJECT-TYPE
	SYNTAX AutonomousType
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The value of this object identifies the type of this
file system."
	::= { hrFSEntry 4 }


hrFSAccess OBJECT-TYPE
	SYNTAX INTEGER {
	readWrite(1),
	readOnly(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An indication if this file system is logically
configured by the operating system to be readable and
writable or only readable.  This does not represent
any local access-control policy, except one that is
applied to the file system as a whole."
	::= { hrFSEntry 5 }


hrFSBootable OBJECT-TYPE
	SYNTAX TruthValue
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A flag indicating whether this file system is
bootable."
	::= { hrFSEntry 6 }


hrFSStorageIndex OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The index of the hrStorageEntry that represents
information about this file system.  If there is no
such information available, then this value shall be
zero.  The relevant storage entry will be useful in
tracking the percent usage of this file system and
diagnosing errors that may occur when it runs out of
space."
	::= { hrFSEntry 7 }


hrFSLastFullBackupDate OBJECT-TYPE
	SYNTAX DateAndTime
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The last date at which this complete file system was

copied to another storage device for backup.  This
information is useful for ensuring that backups are
being performed regularly.

If this information is not known, then this variable
shall have the value corresponding to January 1, year
0000, 00:00:00.0, which is encoded as
(hex)'00 00 01 01 00 00 00 00'."
	::= { hrFSEntry 8 }


hrFSLastPartialBackupDate OBJECT-TYPE
	SYNTAX DateAndTime
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The last date at which a portion of this file system
was copied to another storage device for backup.  This
information is useful for ensuring that backups are
being performed regularly.

If this information is not known, then this variable
shall have the value corresponding to January 1, year
0000, 00:00:00.0, which is encoded as
(hex)'00 00 01 01 00 00 00 00'."
	::= { hrFSEntry 9 }


hrSWOSIndex OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The value of the hrSWRunIndex for the hrSWRunEntry
that represents the primary operating system running
on this host.  This object is useful for quickly and
uniquely identifying that primary operating system."
	::= { hrSWRun 1 }


hrSWRunTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HrSWRunEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The (conceptual) table of software running on the
host."
	::= { hrSWRun 2 }


hrSWRunEntry OBJECT-TYPE
	SYNTAX HrSWRunEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A (conceptual) entry for one piece of software
running on the host Note that because the installed
software table only contains information for software
stored locally on this host, not every piece of
running software will be found in the installed
software table.  This is true of software that was
loaded and run from a non-local source, such as a
network-mounted file system.

As an example of how objects in this table are named,
an instance of the hrSWRunName object might be named
hrSWRunName.1287"
	INDEX { hrSWRunIndex  }

	::= { hrSWRunTable 1 }

hrSWRunEntry ::=
	SEQUENCE {
		hrSWRunIndex INTEGER,
		hrSWRunName InternationalDisplayString,
		hrSWRunID ProductID,
		hrSWRunPath InternationalDisplayString,
		hrSWRunParameters InternationalDisplayString,
		hrSWRunType INTEGER,
		hrSWRunStatus INTEGER
		}

hrSWRunIndex OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A unique value for each piece of software running on
the host.  Wherever possible, this should be the
system's native, unique identification number."
	::= { hrSWRunEntry 1 }


hrSWRunName OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..64))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A textual description of this running piece of
software, including the manufacturer, revision,  and
the name by which it is commonly known.  If this
software was installed locally, this should be the
same string as used in the corresponding
hrSWInstalledName."
	::= { hrSWRunEntry 2 }


hrSWRunID OBJECT-TYPE
	SYNTAX OBJECT IDENTIFIER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The product ID of this running piece of software."
	::= { hrSWRunEntry 3 }


hrSWRunPath OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..128))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A description of the location on long-term storage
(e.g. a disk drive) from which this software was
loaded."
	::= { hrSWRunEntry 4 }


hrSWRunParameters OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..128))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A description of the parameters supplied to this
software when it was initially loaded."
	::= { hrSWRunEntry 5 }


hrSWRunType OBJECT-TYPE
	SYNTAX INTEGER {
	unknown(1),
	operatingSystem(2),
	deviceDriver(3),
	application(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The type of this software."
	::= { hrSWRunEntry 6 }


hrSWRunStatus OBJECT-TYPE
	SYNTAX INTEGER {
	running(1),
	runnable(2),
	notRunnable(3),
	invalid(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The status of this running piece of software.
Setting this value to invalid(4) shall cause this
software to stop running and to be unloaded. Sets to
other values are not valid."
	::= { hrSWRunEntry 7 }


hrSWRunPerfTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HrSWRunPerfEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The (conceptual) table of running software
performance metrics."
	::= { hrSWRunPerf 1 }


hrSWRunPerfEntry OBJECT-TYPE
	SYNTAX HrSWRunPerfEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A (conceptual) entry containing software performance
metrics.  As an example, an instance of the
hrSWRunPerfCPU object might be named
hrSWRunPerfCPU.1287"
	INDEX { hrSWRunIndex  }

	::= { hrSWRunPerfTable 1 }

hrSWRunPerfEntry ::=
	SEQUENCE {
		hrSWRunPerfCPU INTEGER,
		hrSWRunPerfMem KBytes
		}

hrSWRunPerfCPU OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of centi-seconds of the total system's CPU
resources consumed by this process.  Note that on a
multi-processor system, this value may increment by
more than one centi-second in one centi-second of real
(wall clock) time."
	::= { hrSWRunPerfEntry 1 }


hrSWRunPerfMem OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total amount of real system memory allocated to
this process."
	::= { hrSWRunPerfEntry 2 }


hrSWInstalledLastChange OBJECT-TYPE
	SYNTAX TimeTicks
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The value of sysUpTime when an entry in the
hrSWInstalledTable was last added, renamed, or
deleted.  Because this table is likely to contain many
entries, polling of this object allows a management
station to determine when re-downloading of the table
might be useful."
	::= { hrSWInstalled 1 }


hrSWInstalledLastUpdateTime OBJECT-TYPE
	SYNTAX TimeTicks
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The value of sysUpTime when the hrSWInstalledTable
was last completely updated.  Because caching of this
data will be a popular implementation strategy,
retrieval of this object allows a management station
to obtain a guarantee that no data in this table is
older than the indicated time."
	::= { hrSWInstalled 2 }


hrSWInstalledTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HrSWInstalledEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The (conceptual) table of software installed on this
host."
	::= { hrSWInstalled 3 }


hrSWInstalledEntry OBJECT-TYPE
	SYNTAX HrSWInstalledEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A (conceptual) entry for a piece of software
installed on this host.

As an example of how objects in this table are named,
an instance of the hrSWInstalledName object might be
named hrSWInstalledName.96"
	INDEX { hrSWInstalledIndex  }

	::= { hrSWInstalledTable 1 }

hrSWInstalledEntry ::=
	SEQUENCE {
		hrSWInstalledIndex INTEGER,
		hrSWInstalledName InternationalDisplayString,
		hrSWInstalledID ProductID,
		hrSWInstalledType INTEGER,
		hrSWInstalledDate DateAndTime
		}

hrSWInstalledIndex OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A unique value for each piece of software installed
on the host.  This value shall be in the range from 1
to the number of pieces of software installed on the
host."
	::= { hrSWInstalledEntry 1 }


hrSWInstalledName OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..64))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A textual description of this installed piece of
software, including the manufacturer, revision, the
name by which it is commonly known, and optionally,
its serial number."
	::= { hrSWInstalledEntry 2 }


hrSWInstalledID OBJECT-TYPE
	SYNTAX OBJECT IDENTIFIER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The product ID of this installed piece of software."
	::= { hrSWInstalledEntry 3 }


hrSWInstalledType OBJECT-TYPE
	SYNTAX INTEGER {
	unknown(1),
	operatingSystem(2),
	deviceDriver(3),
	application(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The type of this software."
	::= { hrSWInstalledEntry 4 }


hrSWInstalledDate OBJECT-TYPE
	SYNTAX DateAndTime
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The last-modification date of this application as it
would appear in a directory listing.

If this information is not known, then this variable
shall have the value corresponding to January 1, year
0000, 00:00:00.0, which is encoded as
(hex)'00 00 01 01 00 00 00 00'."
	::= { hrSWInstalledEntry 5 }


hrSystemGroup OBJECT IDENTIFIER ::= { hrMIBGroups 1 }

hrStorageGroup OBJECT IDENTIFIER ::= { hrMIBGroups 2 }

hrDeviceGroup OBJECT IDENTIFIER ::= { hrMIBGroups 3 }

hrSWRunGroup OBJECT IDENTIFIER ::= { hrMIBGroups 4 }

hrSWRunPerfGroup OBJECT IDENTIFIER ::= { hrMIBGroups 5 }

hrSWInstalledGroup OBJECT IDENTIFIER ::= { hrMIBGroups 6 }

hrMIBCompliance OBJECT IDENTIFIER ::= { hrMIBCompliances 1 }

END