-- ********************************************************************************** -- -- Linux Operating System Management Functions -- Management Information Base for SNMP Network Management -- -- -- Copyright 2002,2003 Hewlett-Packard Development Company, L.P. -- -- Hewlett-Packard Company shall not be liable for technical or -- editorial errors or omissions contained herein. The information in -- this document is provided "as is" without warranty of any kind and -- is subject to change without notice. The warranties for HP products -- are set forth in the express limited warranty statements -- accompanying such products. Nothing herein should be construed as -- constituting an additional warranty. -- -- Confidential computer software. Valid license from HP required for -- possession, use or copying. Consistent with FAR 12.211 and 12.212, -- Commercial Computer Software, Computer Software Documentation, and -- Technical Data for Commercial Items are licensed to the U.S. -- Government under vendor's standard commercial license. -- -- Refer to the READMIB.RDM file for more information about the -- organization of the information in the Compaq Enterprise. -- -- The Compaq Enterprise number is 232. -- The ASN.1 prefix to, and including the Compaq Enterprise is: -- 1.3.6.1.4.1.232 -- -- *********************************************************************************** CPQLINOS-MIB DEFINITIONS ::= BEGIN IMPORTS compaq FROM CPQHOST-MIB DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215 sysName FROM RFC1213-MIB; -- compaq OBJECT IDENTIFIER ::= { enterprises 232 } cpqLinOsMgmt OBJECT IDENTIFIER ::= { compaq 23 } cpqLinOsMibRev OBJECT IDENTIFIER ::= { cpqLinOsMgmt 1 } cpqLinOsComponent OBJECT IDENTIFIER ::= { cpqLinOsMgmt 2 } cpqLinOsInterface OBJECT IDENTIFIER ::= { cpqLinOsComponent 1 } cpqLinOsSystem OBJECT IDENTIFIER ::= { cpqLinOsComponent 2 } cpqLinOsProcessor OBJECT IDENTIFIER ::= { cpqLinOsComponent 3 } cpqLinOsMemory OBJECT IDENTIFIER ::= { cpqLinOsComponent 4 } cpqLinOsCache OBJECT IDENTIFIER ::= { cpqLinOsComponent 5 } cpqLinOsPagingFile OBJECT IDENTIFIER ::= { cpqLinOsComponent 6 } cpqLinOsDisk OBJECT IDENTIFIER ::= { cpqLinOsComponent 7 } cpqLinOsNetworkInterface OBJECT IDENTIFIER ::= { cpqLinOsComponent 10 } cpqLinOsCommon OBJECT IDENTIFIER ::= { cpqLinOsInterface 4 } -- *********************************************************************************** -- Operating System Information MIB Revision -- ========================================= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqLinOsMgmt Group (1.3.6.1.4.1.232.23) -- cpqLinOsMibRev Group (1.3.6.1.4.1.232.23.1) -- -- -- An SNMP agent conforming to this document will return a -- cpqLinOsMibRevMajor of one (1) and a cpqLinOsMibRevMinor of one (1). -- -- Implementation of the MibRev group is mandatory for all agents -- supporting the Linux Operating System Management MIB. -- -- *********************************************************************************** cpqLinOsMibRevMajor OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The Major Revision level of the MIB. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information, correct interpretation of data may require a MIB document with the same major revision level." ::= { cpqLinOsMibRev 1 } cpqLinOsMibRevMinor OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The Minor Revision level of the MIB. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occurred." ::= { cpqLinOsMibRev 2 } cpqLinOsMibCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), -- default degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The overall condition. This object represents the overall status of the Operating System management system represented by this MIB." ::= { cpqLinOsMibRev 3 } -- *********************************************************************************** -- Operating System MIB OS Common Group -- ==================================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqLinOsMgmt Group (1.3.6.1.4.1.232.23) -- cpqLinOsComponent Group (1.3.6.1.4.1.232.23.2) -- cpqLinOsInterface Group (1.3.6.1.4.1.232.23.2.1) -- cpqLinOsCommon Group (1.3.6.1.4.1.232.23.2.1.4) -- -- -- Implementation of the cpqLinOsCommon group is mandatory for all -- Agents that support the Linux OS Management MIB. -- -- *********************************************************************************** cpqLinOsCommonPollFreq OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The Management Agent's polling frequency. The frequency, in seconds, at which the Agent requests information from the device driver. A frequency of zero (0) indicates that the Insight Agent retrieves the information upon request of a management station, it does not poll the device driver at a specific interval. If the poll frequency is zero (0) all attempts to write to this object will fail. If the poll frequency is non-zero, setting this value will change the polling frequency of the Insight Agent. Setting the poll frequency to zero (0) will always fail, an agent may also choose to fail any request to change the poll frequency to a value that would severely impact system performance." ::= { cpqLinOsCommon 1 } cpqLinOsCommonLastObservedPollCycle OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Management Agent's last polling cycle, measured in milliseconds. This quantity should be approximately the desired polling frequency, but because of scheduling variances, slight distortions are to be expected." ::= { cpqLinOsCommon 2 } cpqLinOsCommonLastObservedTimeSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The point in time where the last polling occured. This quantity counts the seconds from January 1, 1970 (UTC) on. This time stamp is implemented with the Linux gettimeofday call." ::= { cpqLinOsCommon 3 } cpqLinOsCommonLastObservedTimeMSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The point in time where the last polling occured. This quantity counts milliseconds of the last fraction of a second transpired. This time stamp is implemented with the Linux gettimeofday call and is only useful in conjunction with the previously described quantity." ::= { cpqLinOsCommon 4 } -- *********************************************************************************** -- Operating System MIB Operating System Group -- =========================================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqLinOsMgmt Group (1.3.6.1.4.1.232.23) -- cpqLinOsComponent Group (1.3.6.1.4.1.232.23.2) -- cpqLinOsSystem Group (1.3.6.1.4.1.232.23.2.2) -- -- The cpqLinOsSystem group describes the Operating Systems Performance properties. -- -- *********************************************************************************** cpqLinOsSystemUpTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "Total Time that the computer has been operational since it was last started." ::= { cpqLinOsSystem 2 } cpqLinOsSysContextSwitchesPersec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Context Switches/sec is the combined rate at which all processors on the computer are switched from one thread to another. Context switches occur when a running thread voluntarily relinquishes the processor, is preempted by a higher priority ready thread, or switches between user-mode and privileged (kernel) mode to use an Executive or subsystem service. It is the sum of Thread: Context Switches/sec for all threads running on all processors in the computer and is measured in numbers of switches. There are context switch counters on the System and Thread objects." ::= { cpqLinOsSystem 4 } cpqLinOsSysProcesses OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Processes is the number of processes in the computer at the time of data collection. Notice that this is an instantaneous count, not an average over the time interval. Each process represents the running of a program." ::= { cpqLinOsSystem 6 } -- *********************************************************************************** -- Operating System MIB Processor Group -- ==================================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqLinOsMgmt Group (1.3.6.1.4.1.232.23) -- cpqLinOsComponent Group (1.3.6.1.4.1.232.23.2) -- cpqLinOsProcessor Group (1.3.6.1.4.1.232.23.2.3) -- cpqLinOsProcessorTable (1.3.6.1.4.1.232.23.2.3.2) -- -- The cpqLinOsProcessor group describes the Processors Performance properties. -- -- *********************************************************************************** cpqLinOsProcessorTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqLinOsProcessorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of Processor Entries." ::= { cpqLinOsProcessor 2 } cpqLinOsProcessorEntry OBJECT-TYPE SYNTAX CpqLinOsProcessorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A Processor Entry." INDEX { cpqLinOsCpuIndex } ::= { cpqLinOsProcessorTable 1 } CpqLinOsProcessorEntry ::= SEQUENCE { cpqLinOsCpuIndex INTEGER, cpqLinOsCpuInstance DisplayString, cpqLinOsCpuInterruptsPerSec INTEGER, cpqLinOsCpuTimePercent INTEGER, cpqLinOsCpuUserTimePercent INTEGER, cpqLinOsCpuPrivilegedTimePercent INTEGER } cpqLinOsCpuIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This Processor Instance number." ::= { cpqLinOsProcessorEntry 1 } cpqLinOsCpuInstance OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "This Processor Instance Name." ::= { cpqLinOsProcessorEntry 2 } cpqLinOsCpuInterruptsPerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interrupts/sec is the average number of hardware interrupts the processor is receiving and servicing in each second. It does not include DPCs, which are counted separately. This value is an indirect indicator of the activity of devices that generate interrupts, such as the system clock, the mouse, disk drivers, data communication lines, network interface cards and other peripheral devices. These devices normally interrupt the processor when they have completed a task or require attention. Normal thread execution is suspended during interrupts. Most system clocks interrupt the processor every 10 milliseconds, creating a background of interrupt activity." ::= { cpqLinOsProcessorEntry 3 } cpqLinOsCpuTimePercent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "%Processor Time is the percentage of time that the processor is executing a non-Idle thread. This counter was designed as a primary indicator of processor activity. It is calculated by measuring the time that the processor spends executing the thread of the Idle process in each sample interval, and subtracting that value from 100%. (Each processor has an Idle thread which consumes cycles when no other threads are ready to run.) It can be viewed as the fraction of the time spent doing useful work." ::= { cpqLinOsProcessorEntry 4 } cpqLinOsCpuUserTimePercent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "%User Time is the percentage of non-idle processor time spent in user mode. User mode is a restricted processing mode designed for applications, environment subsystems, and integral subsystems. The alternative, privileged mode, is designed for operating system components and allows direct access to hardware and all memory. The operating system switches application threads to privileged mode to obtain operating system services." ::= { cpqLinOsProcessorEntry 7 } cpqLinOsCpuPrivilegedTimePercent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "%Privileged Time is the percentage of non-idle processor time spent in privileged mode. (Privileged mode is a processing mode designed for operating system components and hardware-manipulating drivers. It allows direct access to hardware and all memory. The alternative, user mode, is a restricted processing mode designed for applications, environment subsystems, and integral subsystems. The operating system switches application threads to privileged mode to obtain operating system services.) %Privileged Time includes time servicing interrupts and DPCs. A high rate of privileged time might be attributable to a large number of interrupts generated by a failing device." ::= { cpqLinOsProcessorEntry 8 } -- *********************************************************************************** -- Operating System MIB Memory Group -- ================================= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqLinOsMgmt Group (1.3.6.1.4.1.232.23) -- cpqLinOsComponent Group (1.3.6.1.4.1.232.23.2) -- cpqLinOsMemory Group (1.3.6.1.4.1.232.23.2.4) -- -- The cpqLinOsMemory group describes the System Memory Performance properties. -- -- *********************************************************************************** cpqLinOsMemTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total amount of RAM available to the operating system. This is in most cases slightly less than the total amount of system memory and might be further restricted by the boot parameter 'mem'." ::= { cpqLinOsMemory 2 } cpqLinOsMemFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total amount of RAM that the operating system is currently not claiming." ::= { cpqLinOsMemory 3 } cpqLinOsMemHighTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total amount of memory in the high region. Highmem is all memory above (approx) 860MB of physical RAM. The kernel uses indirect tricks to access the high memory region. Data cache can go in this memory region." ::= { cpqLinOsMemory 4 } cpqLinOsMemHighFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of free memory of the high memory region." ::= { cpqLinOsMemory 5 } cpqLinOsMemLowTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total amount of memory in the low memory region. This is the memory the kernel can address directly. All kernel datastructures need to go into low memory." ::= { cpqLinOsMemory 6 } cpqLinOsMemLowFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of free memory of the low memory region." ::= { cpqLinOsMemory 7 } cpqLinOsMemSwapTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total amount of swap space. This is the sum of the capacities of all swap partitions." ::= { cpqLinOsMemory 8 } cpqLinOsMemSwapFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of free swap space." ::= { cpqLinOsMemory 9 } cpqLinOsMemCached OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Memory in the page cache (diskcache) minus SwapCache." ::= { cpqLinOsMemory 10 } cpqLinOsMemSwapCached OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Memory that once was swapped out, is swapped back in but still also is in the swapfile. If memory is needed it doesn't need to be swapped out again, because it is already in the swapfile. This saves I/O." ::= { cpqLinOsMemory 11 } cpqLinOsMemActive OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Memory that has been used more recently and usually not reclaimed unless absolutely necessary." ::= { cpqLinOsMemory 12 } cpqLinOsMemInactiveDirty OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Dirty means 'might need writing to disk or swap'. This takes more work to free. Examples might be files that have not been written to yet. They aren't written to memory too soon in order to keep the I/O down. For instance, if you're writing logs, it might be better to wait until you have a complete log ready before sending it to disk." ::= { cpqLinOsMemory 13 } cpqLinOsMemInactiveClean OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Assumed to be easily freeable. The kernel will try to keep some clean stuff around always to have a bit of breathing room." ::= { cpqLinOsMemory 14 } -- *********************************************************************************** -- Operating System MIB Paging File Group -- ====================================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqLinOsMgmt Group (1.3.6.1.4.1.232.23) -- cpqLinOsComponent Group (1.3.6.1.4.1.232.23.2) -- cpqLinOsPagingFile Group (1.3.6.1.4.1.232.23.2.6) -- cpqLinOsPagingFileTable (1.3.6.1.4.1.232.23.2.6.2) -- -- The cpqLinOsPagingFile group describes the System Paging File Performance properties. -- -- *********************************************************************************** cpqLinOsSwapInPerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of memory being swapped in from swap files. This might be pages being retrieved because of a page fault or any other data. The unit is kB/s." ::= { cpqLinOsPagingFile 2 } cpqLinOsSwapOutPerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of memory being swapped out into swap files. This might be pages or any other data. The unit is kB/s." ::= { cpqLinOsPagingFile 3 } cpqLinOsPageSwapInPerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of pages being swapped in from swap files. This is in response to a major page fault." ::= { cpqLinOsPagingFile 4 } cpqLinOsPageSwapOutPerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of pages being swapped out to disk. This is usually in response to tight memory situations where sleeping processes get put out to disk." ::= { cpqLinOsPagingFile 5 } cpqLinOsMinFltPerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of minor faults per second system wide. Minor page faults are faults that trigger a page transfer from somewhere in memory as opposed to page transfer from a hard disk." ::= { cpqLinOsPagingFile 6 } cpqLinOsMajFltPerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of major faults per second system wide. Major page faults are faults that trigger a page transfer from a hard disk s opposed to page transfer from memory." ::= { cpqLinOsPagingFile 7 } -- *********************************************************************************** -- Operating System MIB Physical Disk Group -- ======================================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqLinOsMgmt Group (1.3.6.1.4.1.232.23) -- cpqLinOsComponent Group (1.3.6.1.4.1.232.23.2) -- cpqLinOsDisk Group (1.3.6.1.4.1.232.23.2.7) -- cpqLinOsDiskTable (1.3.6.1.4.1.232.23.2.7.2) -- -- The cpqLinOsDisk group describes the Disk Performance properties. -- -- *********************************************************************************** cpqLinOsDiskTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqLinOsDiskEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of Physical Disk Entries." ::= { cpqLinOsDisk 2 } cpqLinOsDiskEntry OBJECT-TYPE SYNTAX CpqLinOsDiskEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A Physical Disk Entry." INDEX { cpqLinOsDiskMajorIndex, cpqLinOsDiskMinorIndex } ::= { cpqLinOsDiskTable 1 } CpqLinOsDiskEntry ::= SEQUENCE { cpqLinOsDiskMajorIndex INTEGER, cpqLinOsDiskMinorIndex INTEGER, cpqLinOsDiskName DisplayString, cpqLinOsDiskScsiIndex INTEGER, cpqLinOsDiskWriteIos INTEGER, cpqLinOsDiskWriteMerges INTEGER, cpqLinOsDiskWriteSectors INTEGER, cpqLinOsDiskWriteDurationMs INTEGER, cpqLinOsDiskWriteIosPerSec INTEGER, cpqLinOsDiskWriteSectorsPerSec INTEGER, cpqLinOsDiskWriteDurationMsPerIos INTEGER, cpqLinOsDiskReadIos INTEGER, cpqLinOsDiskReadMerges INTEGER, cpqLinOsDiskReadSectors INTEGER, cpqLinOsDiskReadDurationMs INTEGER, cpqLinOsDiskReadIosPerSec INTEGER, cpqLinOsDiskReadSectorsPerSec INTEGER, cpqLinOsDiskReadDurationMsPerIos INTEGER } cpqLinOsDiskMajorIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The major number of the device (in the traditional Unix sense)." ::= { cpqLinOsDiskEntry 1 } cpqLinOsDiskMinorIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minor number of the device (in the traditional Unix sense)." ::= { cpqLinOsDiskEntry 2 } cpqLinOsDiskName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The Physical Disk Instance Name." ::= { cpqLinOsDiskEntry 3 } cpqLinOsDiskScsiIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "These are the four numbers that the SCSI subsystem uses to index devices, often written as . The index can be expressed as (id | (lun << 8) | (channel << 16) | (host_no << 24))." ::= { cpqLinOsDiskEntry 4 } cpqLinOsDiskWriteIos OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of write operations that transpired within the last polling interval." ::= { cpqLinOsDiskEntry 5 } cpqLinOsDiskWriteMerges OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of write operations that were coalesced with other operations during the last polling interval." ::= { cpqLinOsDiskEntry 6 } cpqLinOsDiskWriteSectors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of sectors written out to disk during the last polling interval." ::= { cpqLinOsDiskEntry 7 } cpqLinOsDiskWriteDurationMs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Cumulative and concurrent count of milliseconds all write operations took to complete in the last polling interval." ::= { cpqLinOsDiskEntry 8 } cpqLinOsDiskWriteIosPerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Write operations per second within that last polling interval." ::= { cpqLinOsDiskEntry 9 } cpqLinOsDiskWriteSectorsPerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Write sectors per second within the last polling interval." ::= { cpqLinOsDiskEntry 10 } cpqLinOsDiskWriteDurationMsPerIos OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Average milliseconds it took to complete a write operation." ::= { cpqLinOsDiskEntry 11 } cpqLinOsDiskReadIos OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of read operations that transpired within the last polling interval." ::= { cpqLinOsDiskEntry 12 } cpqLinOsDiskReadMerges OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of read operations that were coalesced with other operations during the last polling interval." ::= { cpqLinOsDiskEntry 13 } cpqLinOsDiskReadSectors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of sectors written out to disk during the last polling interval." ::= { cpqLinOsDiskEntry 14 } cpqLinOsDiskReadDurationMs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Cumulative and concurrent count of milliseconds all read operations took to complete in the last polling interval." ::= { cpqLinOsDiskEntry 15 } cpqLinOsDiskReadIosPerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Read operations per second within that last polling interval." ::= { cpqLinOsDiskEntry 16 } cpqLinOsDiskReadSectorsPerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Read sectors per second within the last polling interval." ::= { cpqLinOsDiskEntry 17 } cpqLinOsDiskReadDurationMsPerIos OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Average milliseconds it took to complete a write operation." ::= { cpqLinOsDiskEntry 18 } -- *********************************************************************************** -- Operating System MIB Network Interface Group -- ============================================ -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqLinOsMgmt Group (1.3.6.1.4.1.232.23) -- cpqLinOsComponent Group (1.3.6.1.4.1.232.23.2) -- cpqLinOsNetworkInterface Group (1.3.6.1.4.1.232.23.2.10) -- cpqLinOsNetworkInterfaceTable (1.3.6.1.4.1.232.23.2.10.2) -- -- The cpqLinOsNetworkInterface group describes the Network Performance properties. -- -- *********************************************************************************** cpqLinOsNetworkInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqLinOsNetworkInterfaceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of Network Interface Entries." ::= { cpqLinOsNetworkInterface 2 } cpqLinOsNetworkInterfaceEntry OBJECT-TYPE SYNTAX CpqLinOsNetworkInterfaceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A Network Interface Entry." INDEX { cpqLinOsNetworkInterfaceIndex } ::= { cpqLinOsNetworkInterfaceTable 1 } CpqLinOsNetworkInterfaceEntry ::= SEQUENCE { cpqLinOsNetworkInterfaceIndex INTEGER, cpqLinOsNetworkInterfaceName DisplayString, cpqLinOsNetworkInterfaceTxBytes INTEGER, cpqLinOsNetworkInterfaceTxPackets INTEGER, cpqLinOsNetworkInterfaceTxBytesPerSec INTEGER, cpqLinOsNetworkInterfaceTxPacketsPerSec INTEGER, cpqLinOsNetworkInterfaceRxBytes INTEGER, cpqLinOsNetworkInterfaceRxPackets INTEGER, cpqLinOsNetworkInterfaceRxBytesPerSec INTEGER, cpqLinOsNetworkInterfaceRxPacketsPerSec INTEGER } cpqLinOsNetworkInterfaceIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Network Interface Instance number." ::= { cpqLinOsNetworkInterfaceEntry 1 } cpqLinOsNetworkInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The Network Interface Instance Name." ::= { cpqLinOsNetworkInterfaceEntry 2 } cpqLinOsNetworkInterfaceTxBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of bytes that were transmitted from the network interface within the last polling interval." ::= { cpqLinOsNetworkInterfaceEntry 3 } cpqLinOsNetworkInterfaceTxPackets OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets that were transmitted from the network interface within the last polling interval." ::= { cpqLinOsNetworkInterfaceEntry 4 } cpqLinOsNetworkInterfaceTxBytesPerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of bytes per second that were transmitted from the network interface." ::= { cpqLinOsNetworkInterfaceEntry 5 } cpqLinOsNetworkInterfaceTxPacketsPerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets per second that were transmitted from the network interface." ::= { cpqLinOsNetworkInterfaceEntry 6 } cpqLinOsNetworkInterfaceRxBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of bytes that were received from the network interface within the last polling interval." ::= { cpqLinOsNetworkInterfaceEntry 7 } cpqLinOsNetworkInterfaceRxPackets OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets that were received from the network interface within the last polling interval." ::= { cpqLinOsNetworkInterfaceEntry 8 } cpqLinOsNetworkInterfaceRxBytesPerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of bytes per second that were received from the network interface." ::= { cpqLinOsNetworkInterfaceEntry 9 } cpqLinOsNetworkInterfaceRxPacketsPerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets per second that were received from the network interface." ::= { cpqLinOsNetworkInterfaceEntry 10 } END