#-MIBFILE: cpqhsv110v3.mib

CPQHSV110V3-MIB DEFINITIONS ::= BEGIN


DisplayString ::=
	OCTET STRING

PhysAddress ::=
	OCTET STRING

compaq OBJECT IDENTIFIER ::= { enterprises 232 }

cpqElementManager OBJECT IDENTIFIER ::= { compaq 136 }

cpqHSV OBJECT IDENTIFIER ::= { cpqElementManager 1 }

cpqHSVAgent OBJECT IDENTIFIER ::= { cpqHSV 1 }

cpqHSVServer OBJECT IDENTIFIER ::= { cpqHSV 2 }

hsvObject OBJECT IDENTIFIER ::= { cpqHSV 3 }

maHSVMibRev OBJECT IDENTIFIER ::= { cpqHSV 4 }

scell OBJECT IDENTIFIER ::= { hsvObject 1 }

agent OBJECT IDENTIFIER ::= { hsvObject 2 }

host OBJECT IDENTIFIER ::= { hsvObject 3 }

nsc OBJECT IDENTIFIER ::= { hsvObject 4 }

shelf OBJECT IDENTIFIER ::= { hsvObject 8 }

agManufacturer OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The name of the StorageWorks HSV Agent manufacturer."
	::= { cpqHSVAgent 1 }


agMajVersion OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "StorageWorks HSV Agent Major Version Number (e.g., 3 
for 3.0)."
	::= { cpqHSVAgent 2 }


agMinVersion OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "StorageWorks HSV Agent Minor Version Number (e.g., 0 
for 3.0)."
	::= { cpqHSVAgent 3 }


agHostName OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Host System Network Name where the agent resides."
	::= { cpqHSVAgent 4 }


agEnterprise OBJECT-TYPE
	SYNTAX OBJECT IDENTIFIER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Enterprise ID subtree for StorageWorks HSV Agent MIB 
is registered."
	::= { cpqHSVAgent 5 }


agDescription OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The StorageWorks HSV Agent description."
	::= { cpqHSVAgent 6 }


agStatusTable OBJECT-TYPE
	SYNTAX SEQUENCE OF AgentEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This table holds the status information for
each HSV Management Agent."
	::= { cpqHSVAgent 7 }


agentEntry OBJECT-TYPE
	SYNTAX AgentEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Agent information entry."
	INDEX { agentEntryIndex  }

	::= { agStatusTable 1 }

agentEntry ::=
	SEQUENCE {
		agentEntryIndex INTEGER,
		agentStatus INTEGER,
		agentEventCode INTEGER,
		agentEventLevel INTEGER,
		agentEventTimeDate DisplayString,
		agentEventDescription DisplayString
		}

agentEntryIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The index into agentStatusTable ."
	::= { agentEntry 1 }


agentStatus OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	degraded(3),
	failed(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This variable reports the overall status of the
Agent. 
INFORMATIONAL: Normal Operating Condition
MINOR: Warning Condition
MAJOR: Failure or Failure Immanent
CRITICAL: Agent condition is critical or unknown"
	::= { agentEntry 2 }


agentEventCode OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The management agent event code."
	::= { agentEntry 3 }


agentEventLevel OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The management event level."
	::= { agentEntry 4 }


agentEventTimeDate OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The date and time the event occurred dd-mm-yyyy/hr:min:sec."
	::= { agentEntry 5 }


agentEventDescription OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Description of the management agent event."
	::= { agentEntry 6 }


srvCPU OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The server CPU type (e.g., 80486)."
	::= { cpqHSVServer 1 }


srvComputerType OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The server Computer type (e.g., PC/AT)."
	::= { cpqHSVServer 2 }


srvModel OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The server model number."
	::= { cpqHSVServer 3 }


srvSubModel OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The server submodel number."
	::= { cpqHSVServer 4 }


srvBiosVersion OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The server BIOS Version."
	::= { cpqHSVServer 5 }


srvOS OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The server operating system name (e.g., WINNT)."
	::= { cpqHSVServer 6 }


srvOSMajVersion OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The server OS major version number 
(e.g., 3 for WINNT 3.51)."
	::= { cpqHSVServer 7 }


srvOSMinVersion OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The server OS minor version number (e.g., 51 for
WINNT 3.51)."
	::= { cpqHSVServer 8 }


maHSVMibRevMajor OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Major Revision level.
A change in the major revision level represents a major change
in the architecture of the MIB.  A change in the major revision
level may indicate a significant change in the information
supported and/or the meaning of the supported information,
correct interpretation of data may require a MIB document with
the same major revision level."
	::= { maHSVMibRev 1 }


maHSVMibRevMinor OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Minor Revision level.
A change in the minor revision level may represent some minor
additional support, no changes to any pre-existing information
has occurred."
	::= { maHSVMibRev 2 }


scellTotal OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total number of StorageCells (storage pools) present 
in the Fusion System."
	::= { scell 1 }


scellStatusTable OBJECT-TYPE
	SYNTAX SEQUENCE OF ScellEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This table holds the status information for
each StorageCell."
	::= { scell 2 }


scellEntry OBJECT-TYPE
	SYNTAX ScellEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The StorageCell information entry."
	INDEX { scellEntryIndex  }

	::= { scellStatusTable 1 }

scellEntry ::=
	SEQUENCE {
		scellEntryIndex INTEGER,
		scellName DisplayString,
		scellUUID DisplayString,
		scellStatus INTEGER,
		scellEventDescription DisplayString,
		scellEventTimeDate DisplayString,
		scellEventCode DisplayString,
		scellSWComponent INTEGER,
		scellECode INTEGER,
		scellCAC INTEGER,
		scellEIP INTEGER,
		scellNameDateTime DisplayString
		}

scellEntryIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The index into scellStatusTable ."
	::= { scellEntry 1 }


scellName OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The StorageCell Name."
	::= { scellEntry 2 }


scellUUID OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The StorageCell unique ID."
	::= { scellEntry 3 }


scellStatus OBJECT-TYPE
	SYNTAX INTEGER {
	informational(1),
	minor(2),
	major(3),
	failed(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This variable reports the overall status of the
StorageCell. 
INFORMATIONAL: Normal Operating Condition
MINOR: Warning Condition
MAJOR: Failure or Failure Immanent
CRITICAL: Condition is critical or unknown"
	::= { scellEntry 4 }


scellEventDescription OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The StorageCell Event Description."
	::= { scellEntry 5 }


scellEventTimeDate OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The StorageCell Event Time and Date."
	::= { scellEntry 6 }


scellEventCode OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The StorageCell Event Code."
	::= { scellEntry 7 }


scellSWComponent OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Event Code Software Component ID."
	::= { scellEntry 8 }


scellECode OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The StorageCell Event Code event number."
	::= { scellEntry 9 }


scellCAC OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The event code Corrective Action Code."
	::= { scellEntry 10 }


scellEIP OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Event Code EIP Type."
	::= { scellEntry 11 }


scellNameDateTime OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The StorageCell Name: Date & Time of Event."
	::= { scellEntry 12 }


hostTotal OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total number of hosts attached the Fusion System."
	::= { host 1 }


hostStatusTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HostEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This table holds the status information for
each Host."
	::= { host 2 }


hostEntry OBJECT-TYPE
	SYNTAX HostEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Host information entry."
	INDEX { hostEntryIndex  }

	::= { hostStatusTable 1 }

hostEntry ::=
	SEQUENCE {
		hostEntryIndex INTEGER,
		hostName DisplayString,
		hostUUID DisplayString,
		hostStatus INTEGER
		}

hostEntryIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The index into hostStatusTable ."
	::= { hostEntry 1 }


hostName OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Host Name."
	::= { hostEntry 2 }


hostUUID OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Host unique ID."
	::= { hostEntry 3 }


hostStatus OBJECT-TYPE
	SYNTAX INTEGER {
	informational(0),
	minor(1),
	major(2),
	critical(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This variable reports the overall status of the Host. 
INFORMATIONAL: Normal Operating Condition
MINOR: Warning Condition
MAJOR: Failure or Failure Immanent
CRITICAL: Condition is critical or unknown"
	::= { hostEntry 4 }


nscTotal OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total number of Network Storage Controllers present in the Fusion System."
	::= { nsc 1 }


nscStatusTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NscEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This table holds the status information for
each Network Storage Controller."
	::= { nsc 2 }


nscEntry OBJECT-TYPE
	SYNTAX NscEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The NSC information entry."
	INDEX { nscEntryIndex  }

	::= { nscStatusTable 1 }

nscEntry ::=
	SEQUENCE {
		nscEntryIndex INTEGER,
		nscName DisplayString,
		nscUUID DisplayString,
		nscStatus INTEGER
		}

nscEntryIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The index into nscStatusTable ."
	::= { nscEntry 1 }


nscName OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Network Storage Controller Name."
	::= { nscEntry 2 }


nscUUID OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The NSC unique ID."
	::= { nscEntry 3 }


nscStatus OBJECT-TYPE
	SYNTAX INTEGER {
	informational(0),
	minor(1),
	major(2),
	critical(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This variable reports the overall status of the
Network Storage Controller. 
INFORMATIONAL: Normal Operating Condition
MINOR: Warning Condition
MAJOR: Failure or Failure Immanent
CRITICAL: Condition is critical or unknown"
	::= { nscEntry 4 }


shelfTotal OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total number of disk shelves present in the HSV system."
	::= { shelf 1 }


shelfStatusTable OBJECT-TYPE
	SYNTAX SEQUENCE OF ShelfEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This table holds the status information for
each Shelf."
	::= { shelf 2 }


shelfEntry OBJECT-TYPE
	SYNTAX ShelfEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Shelf information entry."
	INDEX { shelfEntryIndex  }

	::= { shelfStatusTable 1 }

shelfEntry ::=
	SEQUENCE {
		shelfEntryIndex INTEGER,
		shelfStatus INTEGER,
		shelfId INTEGER,
		shelfElementType INTEGER,
		shelfElementNum INTEGER,
		shelfErrorCode INTEGER
		}

shelfEntryIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The index into shelfStatusTable ."
	::= { shelfEntry 1 }


shelfStatus OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	degraded(3),
	failed(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This variable reports the overall status of the
Shelf. 
OTHER: unknown or undeterminable
OK: Normal Operating Condition
DEGRADED: Warning Condition
FAILED: Failure"
	::= { shelfEntry 2 }


shelfId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Shelf Id (shelf number)."
	::= { shelfEntry 3 }


shelfElementType OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Shelf Element type.
01: Disk
02: Power Supply
03: Fan
04: Temp Sensor
06: Alarm Horn
07: EMU
12: LCD
15: GBIC
16: Language
17: Comm Port
18: Volt Sensor
19: Amp Sensor
128:Enclosure
130:Back plane
255:Host"
	::= { shelfEntry 4 }


shelfElementNum OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Which particular Element of that type."
	::= { shelfEntry 5 }


shelfErrorCode OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Element Type's Error Code."
	::= { shelfEntry 6 }



emuEventTrapInformative TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, shelfId, shelfElementType, shelfElementNum, shelfErrorCode }

	--#TYPE      "EMU Informational Event"

	--#SUMMARY   "scellNameDateTime %s : emuShelfId %d : emuElementType %d : emuElementNum %d : emuErrorCode %d"

	--#ARGUMENTS {0,1,2,3,4}

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     OK
DESCRIPTION "An EMU Informational event has occurred
scellNameDateTime: StorageCell name, and date/time
emuShelfId: disk shelf number in the cabinet
emuElementType: the element type
01: Disk      
02: Pwr Supply      
03: Fan      
04: Temp Sensor      
06: Alarm Horn      
07: EMU      
12: LCD      
15: Xcvr      
16: Lang      
17: Comm Port      
18: Volt Sensor      
19: Amp Sensor      
128:Encl      
130:Back plane      
emuErrorCode: error number "
	::= 136001


emuEventTrapNoncritical TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, shelfId, shelfElementType, shelfElementNum, shelfErrorCode }

	--#TYPE      "EMU Non Critical Event"

	--#SUMMARY   "scellNameDateTime %s : emuShelfId %d : emuElementType %d : emuElementNum %d : emuErrorCode %d"

	--#ARGUMENTS {0,1,2,3,4}

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "An EMU Non-critical event has occurred
scellNameDateTime: StorageCell name, and date/time
emuShelfId: disk shelf number in the cabinet
emuElementType: the element type
01: Disk      
02: Pwr Supply      
03: Fan      
04: Temp Sensor      
06: Alarm Horn      
07: EMU      
12: LCD      
15: Xcvr      
16: Lang      
17: Comm Port      
18: Volt Sensor      
19: Amp Sensor      
128:Encl      
130:Back plane      
emuErrorCode: error number "
	::= 136002


emuEventTrapCritical TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, shelfId, shelfElementType, shelfElementNum, shelfErrorCode }

	--#TYPE      "EMU Critical Event"

	--#SUMMARY   "scellNameDateTime %s : emuShelfId %d : emuElementType %d : emuElementNum %d : emuErrorCode %d"

	--#ARGUMENTS {0,1,2,3,4}

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     CRITICAL
DESCRIPTION "An EMU Critical event has occurred
scellNameDateTime: StorageCell name, and date/time
emuShelfId: disk shelf number in the cabinet
emuElementType: the element type
01: Disk      
02: Pwr Supply      
03: Fan      
04: Temp Sensor      
06: Alarm Horn      
07: EMU      
12: LCD      
15: Xcvr      
16: Lang      
17: Comm Port      
18: Volt Sensor      
19: Amp Sensor      
128:Encl      
130:Back plane      
emuErrorCode: error number "
	::= 136003


emuEventTrapUnrecoverable TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, shelfId, shelfElementType, shelfElementNum, shelfErrorCode }

	--#TYPE      "EMU Unrecoverable Event"

	--#SUMMARY   "scellNameDateTime %s : emuShelfId %d : emuElementType %d : emuElementNum %d : emuErrorCode %d"

	--#ARGUMENTS {0,1,2,3,4}

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     FAILED
DESCRIPTION "An EMU Unrecoverable event has occurred
scellNameDateTime: StorageCell name, and date/time
emuShelfId: disk shelf number in the cabinet
emuElementType: the element type
01: Disk      
02: Pwr Supply      
03: Fan      
04: Temp Sensor      
06: Alarm Horn      
07: EMU      
12: LCD      
15: Xcvr      
16: Lang      
17: Comm Port      
18: Volt Sensor      
19: Amp Sensor      
128:Encl      
130:Back plane      
emuErrorCode: error number "
	::= 136004


sCellEventTrap_1_0 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. During Executive Services initialization the system time value was set to the value contained in the time field. The action field contains one of the following codes which describes the condition that caused the time value to be chosen: <UL><LI>0 = TOY clock unavailable; time reset to default date and time. <LI>1 = TOY clock time value was less than or equal to the last known time value previously stored in nonvolatile memory; time reset to default date and time. <LI>2 = EDC was bad for last known time value previously stored in nonvolatile memory; time reset to default date and time. <LI>3 = TOY clock not running; time reset to default date and time. <LI>4 = TOY clock time value believed to be accurate; time set to TOY clock time value. </UL>"
	::= 13600256


sCellEventTrap_1_1 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The system time value was set to the value contained in the time field by a call to the EXEC$SET_TIME service. As part of setting the time in a dual HSV110 controller configuration, the times are synchronized. The action field contains one of the following codes which describes the action taken: <UL><LI>0 = The time was set to the time value on this HSV110 controller. <LI>1 = The master HSV110 controller requested the slave HSV110 controller to set its time to the time value. <LI>2 = The slave HSV110 controller set the local time to the time value. <LI>3 = The HSV110 controller's TOY clock was set to the time value. </UL>"
	::= 13600257


sCellEventTrap_3_0 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller identified in the node_name field has failed in communicating with the Cabinet (Rack) Bus Interface Controller."
	::= 13600768


sCellEventTrap_3_1 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. The physical disk drive identified by the device field has been rendered inoperable. <UL><LI>If the flags.quorum_disk flag is nonzero, the physical disk drive is the Storage System Quorum disk identified in the quorum_sequence field. <LI>If the flags.inq_state flag is nonzero, the content of the inq_data and capacity fields is valid. <LI>If the rss_flags.member_abnormal flag is nonzero, the content of the member_state field is valid. </UL>The rack_num field will not be valid until a future release. <P> The reason_code field contains a code giving the reason the physical disk drive has been rendered inoperable: <UL><LI>0x001 = CS IO failure <LI>0x002 = Scrubber IO failure <LI>0x003 = Attempt to set CBIT on normal drive <LI>0x004 = Attempt to set CBIT on merging drive <LI>0x100 = The Target Discovery Service Descriptor retry count has been exceeded <LI>0x101 = Inoperable for Bad Block Replacement <LI>0x102 = The soft error count has been exceeded <LI>0x103 = The number of exchange timeouts permitted was exceeded <LI>0x104 = Communication with drive has failed an excessive number of times <LI>0x105 = The number of retries has been exceeded <LI>0x106 = Medium/Hardware Errors encountered on this physical disk drive <LI>0x107 = The number of Directed LIP's has surpassed the threshold <LI>0x200 = Smart event from a physical disk drive not in Storage System <LI>0x201 = Smart event from a physical disk drive not a Volume <LI>0x202 = Smart event from a physical disk drive not a RSS <LI>0x203 = Failure predicted from physical disk drive <LI>0x204 = Can't read from physical disk drive from the poll <LI>0x205 = Failure predicted from physical disk drive while deleting Disk Group <LI>0x206 = physical disk drive forced inoperative from maintenance command for temporary POID <LI>0x207 = physical disk drive forced inoperative from maintenance command for POID <LI>0x208 = Bad block recovery failed or can't read FPAB <LI>0x209 = Failure to remove volume from Storage System <LI>0x20A = Failure to update metadata </UL>"
	::= 13600769


sCellEventTrap_3_2 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. A physical disk drive will not be used because the maximum number of physical disk drives already exist in the current Storage System. The affected physical disk drive is identified in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The location of the physical disk drive is contained in the rack_num, dencl_num, and bay fields. Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the reason_code, flags, rss_flags, inq_data, quorum_sequence, capacity, and member_state fields is undefined."
	::= 13600770


sCellEventTrap_3_3 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A HSV110 controller has begun booting. That controller is identified in the node_name field. Note that in this case the content of the scell_tag field is undefined."
	::= 13600771


sCellEventTrap_3_4 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller identified in the node_name field has finished the process of bringing the Storage System, identified in the scell_tag field, online."
	::= 13600772


sCellEventTrap_3_5 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller identified in the node_name field has been joined into the Storage System."
	::= 13600773


sCellEventTrap_3_6 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller identified in the node_name field has been ousted from the Storage System identified in the scell_tag field."
	::= 13600774


sCellEventTrap_3_7 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller identified in the node_name field is now the Storage System, identified in the scell_tag field, master."
	::= 13600775


sCellEventTrap_3_8 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller identified in the node_name field has been brought into the Storage System identified in the scell_tag field."
	::= 13600776


sCellEventTrap_4_0 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Undetermined -- more information needed to determine severity. HSV110 controller operation was terminated due to an unrecoverable event detected by either software or hardware or due to an action initiated via the Storage System Management Interface."
	::= 13601024


sCellEventTrap_4_1 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Undetermined -- more information needed to determine severity. An HSV110 controller has sent a last gasp message prior to terminating operation. The terminated HSV110 controller is identified in the lter.terminating_ctrlr field. The lter.termination_event.u.value field contains the termination cause (i.e., termination code). The lter.termination_event.termination_location field contains the termination location. The lter.termination_time field contains the termination date and time. The lter.seq field contains the index of the HSV110 controller's Last Termination Event Array element assigned to the termination event. The lter.sw_version, lter.baselevel_id, and lter.ctrlr_model_id fields identify the software level and controller model information. The lter.uptime field contains a value that represents the number of seconds the HSV110 controller has executed functional code since its first power up. Note that the reporting_ctrlr header field identifies the HSV110 controller that received the last gasp message. All other header fields reflect information supplied by the terminating controller."
	::= 13601025


sCellEventTrap_4_2 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A machine check occurred while a termination event was being processed. The post-termination operation being performed at the time the event occurred can be derived from the lter.reuea_index field. Note: The lteihd and lter fields may not describe the event that caused the HSV110 controller to terminate operation depending on how far termination processing got before the machine check occurred."
	::= 13601026


sCellEventTrap_4_3 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. An unexpected event occurred while a termination event was being processed. The value contained in the uei.type field describes the event as follows: <UL><LI>0 = Unrecognized Unexpected Event code. <LI>1 = Power failure before initialization could complete. <LI>2 = Recursive termination before initialization could complete. <LI>3 = Terminated during the first part post-termination preparation. <LI>4 = Terminated during the load of the G3 Glue registers. <LI>5 = Terminated during the second part post-termination preparation. <LI>6 = Terminated during event report block load. <LI>7 = Terminated during initialization of all hardware components and software data structures in preparation for restart. <LI>8 = Terminated during execution of an unrecognized post-termination operation (premature). <LI>9 = Power failure during execution of a post-termination operation. <LI>A = No good entries found in Termination Event Array. (Note that this condition is expected following the first boot of a newly manufactured HSV110 controller. In that case this event can be safely ignored; no action is necessary.) <LI>B = The EDC of one or more Termination Event Array entries is bad. <LI>C = Termination Event Array entry control block revision is different. <LI>D = Termination Event Array entry information block revision is different. <LI>E = Termination Event Array entry up time value is greater than the system's up time value. <LI>F = Termination Event Array entry up time value is less than the previous entry's up time value. <LI>10= Termination Event Array entry sequence number value is less than the previous entry's sequence number value. <LI>11= Detected an unrecognized dump/restart control code. <LI>12= Failed to terminate the entity dump loop. <LI>13= Unexpected dump entity size. <LI>14= Unexpected Event Log Packet processing stage code. <LI>15= Number of Termination Parameters supplied not equal to maximum allowed as required. </UL><P> The post-termination operation being performed at the time the unexpected event occurred is contained in the uei.pto field. Note: The lteihd and lter fields may not describe the event that caused the HSV110 controller to terminate operation depending on how far termination processing got before the unexpected event occurred."
	::= 13601027


sCellEventTrap_4_4 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Storage System Event Log validation completed successfully. The content of the cinfo.scelcbi.status field, the cinfo.scelcbi structure, and the minfo.scelmi structure show the validated state of the Storage System Event Log. The meaning of the status value contained in the cinfo.scelcbi.status field is as follows: <UL><LI>0 = No problems found. </UL><P> Note: The content of the ainfo fields, cinfo.sctelcbi structure, and minfo.sctelmi structure is undefined."
	::= 13601028


sCellEventTrap_4_5 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Storage System Event Log validation failed. The content of the cinfo.scelcbi.status field, the cinfo.scelcbi structure, and the minfo.scelmi structure show the state of the Storage System Event Log at the time of the failure. The content and state of the Storage System Event Log have been initialized to their initial operational settings. The meaning of the status value contained in the cinfo.scelcbi.status field is as follows: <UL><LI>1 = Cookie value is not as expected. <LI>2 = Event data overflows the buffer. <LI>3 = Event data size is not a multiple of 4 bytes, is less than the minimum, or is greater than the maximum. <LI>4 = Event Information Packet type is greater than the maximum. <LI>5 = Event information size is not a multiple of 4 bytes, is less than the minimum, is greater than the maximum, doesn't match the Event Information Packet type size, or when combined with the entry header size doesn't equal the entry size. <LI>6 = Event code is zero. <LI>7 = Event is out of sequence. <LI>8 = Dead space area at the end of a partially packed buffer contains a nonzero value. <LI>9 = An event data block containing a nonzero value was found after end of event data was detected. <LI>A = Sequence number reset flag not set as expected. <LI>B = The event log contains no entries. <LI>C = Event data block read failed during maintenance verification. <LI>D = Event data block read failed during maintenance completion. <LI>E = Event data block erase failed during maintenance completion. <LI>F = Control block read failed during maintenance verification. <LI>17= The event log was destroyed and prepared for re-initialization. </UL><P> Note: The content of the ainfo fields, cinfo.sctelcbi structure, and minfo.sctelmi structure is undefined."
	::= 13601029


sCellEventTrap_4_6 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. Event reports were lost due to an insufficient supply of Event Log Packets on the HSV110 controller that is the Storage System Master. The ainfo.events_not_reported field shows the number of event reports lost. Note: The content of the ainfo.quiesce_type field, ainfo.remote_event field cinfo.sctelcbi structure, and minfo.sctelmi structure is undefined."
	::= 13601030


sCellEventTrap_4_7 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. Event reports were lost due to an insufficient supply of Event Log Packets on the HSV110 controller that is not the Storage System Master. The ainfo.events_not_reported field shows the number of event reports lost. Note: The content of the ainfo.quiesce_type field, ainfo.remote_event field cinfo.sctelcbi structure, and minfo.sctelmi structure is undefined."
	::= 13601031


sCellEventTrap_4_8 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Storage System Termination Event Log has become inaccessible. The content of the cinfo.sctelcbi.status field, the cinfo.sctelcbi structure, and the minfo.sctelmi structure show the current state of the Storage System Termination Event Log. The meaning of the status value contained in the cinfo.sctelcbi.status field is as follows: <UL><LI>F = Control block read failed during maintenance verification. <LI>10= Control block write failed during maintenance verification. <LI>11= Event data block write failed during maintenance update. <LI>12= Control block write failed during maintenance completion. <LI>13= Storage System Termination Event Log related send was unsuccessful or the master found that the Storage System Termination Event Log is inaccessible. <LI>16= Event data block read failed during retrieval request. </UL><P> Note: The content of the ainfo fields, cinfo.scelcbi structure, and minfo.scelmi structure is undefined."
	::= 13601032


sCellEventTrap_4_9 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Storage System Termination Event Log validation completed successfully. The content of the cinfo.sctelcbi.status field, the cinfo.sctelcbi structure, and the minfo.sctelmi structure show the validated state of the Storage System Termination Event Log. The meaning of the status value contained in the cinfo.sctelcbi.status field is as follows: <UL><LI>0 = No problems found. </UL><P> Note: The content of the ainfo fields, cinfo.scelcbi structure, and minfo.scelmi structure is undefined."
	::= 13601033


sCellEventTrap_4_a TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Storage System Termination Event Log validation failed. The content of the cinfo.sctelcbi.status field, the cinfo.sctelcbi structure, and the minfo.sctelmi structure show the state of the Storage System Termination Event Log at the time of the failure. The meaning of the status value contained in the cinfo.sctelcbi.status field is as follows: <UL><LI>F = Control block read failed during maintenance verification. <LI>10= Control block write failed during maintenance verification. <LI>11= Event data block write failed during maintenance update. <LI>12= Control block write failed during maintenance completion. <LI>13= Storage System Termination Event Log related send was unsuccessful or the master found that the Storage System Termination Event Log is inaccessible. <LI>16= Event data block read failed during retrieval request. <LI>17= The log was destroyed and prepared for re-initialization. </UL><P> Note: The content of the ainfo fields, cinfo.scelcbi structure, and minfo.scelmi structure is undefined."
	::= 13601034


sCellEventTrap_4_b TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Storage System Termination Event Log has been updated with the termination event information obtained from the HSV110 controller that is not the Storage System Master. The content of the cinfo.sctelcbi.status field, the cinfo.sctelcbi structure, and the minfo.sctelmi structure show the updated state of the Storage System Termination Event Log. The meaning of the status value contained in the cinfo.sctelcbi.status field is as follows: <UL><LI>0 = No problems found. </UL><P> Note: The content of the ainfo fields, cinfo.scelcbi structure, and minfo.scelmi structure is undefined."
	::= 13601035


sCellEventTrap_4_c TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. The Fault Manager on the Storage System Master received an invalid Event Information Packet from the remote Fault Manager. The header information from the invalid Event Information Packet is contained in the ainfo.remote_event field. Note: The content of the ainfo.quiesce_type field, ainfo.events_not_reported field, cinfo.scelcbi structure, cinfo.sctelcbi structure, minfo.scelmi structure, and minfo.sctelmi structure is undefined."
	::= 13601036


sCellEventTrap_4_d TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Fault Manager operation was made quiescent. If the ainfo.quiesce_type field is equal to 0, the operation was performed on both HSV110 controllers. If the ainfo.quiesce_type field is equal to 1, the operation was performed only on the HSV110 controller that is not the Storage System Master. Note: The content of the ainfo.events_not_reported field, cinfo.scelcbi structure, cinfo.sctelcbi structure, minfo.scelmi structure, and minfo.sctelmi structure is undefined."
	::= 13601037


sCellEventTrap_4_e TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Undetermined -- more information needed to determine severity. An HSV110 controller sent a last gasp message prior to terminating operation with an indication that the HSV110 controller identified in the lter.terminating_ctrlr field should also terminate operation."
	::= 13601038


sCellEventTrap_4_f TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. This HSV110 controller sent its termination event information to the HSV110 controller that is the Storage System Master. The content of the cinfo.sctelcbi.status field, the cinfo.sctelcbi structure, and the minfo.sctelmi structure show the updated state of the Storage System Termination Event Log. The meaning of the status value contained in the cinfo.sctelcbi.status field is as follows: <UL><LI>0 = No problems found. </UL><P> Note: The content of the ainfo fields, cinfo.scelcbi structure, and minfo.scelmi structure is undefined."
	::= 13601039


sCellEventTrap_4_10 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. Event reports were lost due to an insufficient supply of ISR Event Log Packets on the HSV110 controller that is the Storage System Master. The ainfo.events_not_reported field shows the number of event reports lost. Note: The content of the ainfo.quiesce_type field, ainfo.remote_event field cinfo.sctelcbi structure, and minfo.sctelmi structure is undefined."
	::= 13601040


sCellEventTrap_4_11 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. Event reports were lost due to an insufficient supply of ISR Event Log Packets on the HSV110 controller that is not the Storage System Master. The ainfo.events_not_reported field shows the number of event reports lost. Note: The content of the ainfo.quiesce_type field, ainfo.remote_event field cinfo.sctelcbi structure, and minfo.sctelmi structure is undefined."
	::= 13601041


sCellEventTrap_6_0 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A physical disk drive has reported that it has exceeded its failure prediction threshold. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the al_pa field. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fed_class field. The command issued to the physical disk drive is contained in the cmd field. The sense data obtained from the physical disk drive as a result of the failure prediction threshold exceeded error is contained in the error field. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601536


sCellEventTrap_6_1 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. A Fibre Channel port on the HSV110 controller has failed to respond. The identity of the affected Fibre Channel port is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number of the affected Fibre Channel port is contained in the port field. The peb array contains the port event block information. The peq_frz_prod_index field contains the index to the port event block in use when the Tachyon chip entered the frozen state. The peq_prod_index field contains the index to the next port event block. The peq_cons_index field contains the index to the next port event block to be acted upon. The failure_cause field contains the internal routing value as follows: <UL><LI>1 - Excessive exchange timeouts on loop <LI>2 - Excessive link errors on loop <LI>3 - Exhausted Link Down retries on loop with signal <LI>4 - Exhausted Link Down retries on loop with loss of signal <LI>5 - Excessive link inits on loop without completing device discovery </UL>"
	::= 13601537


sCellEventTrap_6_2 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A physical disk drive has reported a check condition error. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the al_pa field. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fed_class field. The command issued to the physical disk drive is contained in the cmd field. The sense data obtained from the physical disk drive as a result of the check condition error is contained in the error field. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601538


sCellEventTrap_6_3 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. An exchange sent to a physical disk drive or another HSV110 controller via the mirror port or a Fibre Channel port has timed out. The identity of the intended recipient is contained in the device field. The Fibre Channel port over which the frame was sent is identified in the cerp_id field. The HSV110 controller internal Fibre Channel port number over which the frame was sent is contained in the port field. The arbitrated loop physical address of the intended recipient is contained in the al_pa field. The missing_port and missing_cerp_id fields are unused. The location of the intended recipient is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. The number of timeouts detected is contained in the num_times field. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601539


sCellEventTrap_6_4 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. Work was unexpectedly sent to this HSV110 controller by a physical disk drive or another HSV110 controller. This HSV110 controller did not originate the work. The identity of the sender is contained in the device field. The Fibre Channel port over which the unexpected work was received is identified in the cerp_id field. The HSV110 controller internal Fibre Channel port number over which the unexpected work was received is contained in the port field. The arbitrated loop physical address of the sender is contained in the al_pa field. The location of the sender is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. The hdr_cdb field contains the command descriptor block and Fibre Channel header information associated with the unexpected work."
	::= 13601540


sCellEventTrap_6_5 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. Work has been sent to a physical disk drive or another HSV110 controller via the mirror port but it did not respond. The identity of the intended target is contained in the device field. The Fibre Channel port over which the work was sent is identified in the cerp_id field. The HSV110 controller internal Fibre Channel port over which the work was sent is contained in the port field. The arbitrated loop physical address of the intended target is contained in the al_pa field. The location of the intended target is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fed_class field. The command issued to the intended target is contained in the cmd field. Note that in this case the content of the error field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601541


sCellEventTrap_6_7 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. A Target Discovery Service Descriptor exchange sent to a physical disk drive has timed out. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the al_pa field. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fed_class field. The command issued to the physical disk drive is contained in the cmd field. Note that in this case the content of the error field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601543


sCellEventTrap_6_8 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. An excessive number of link errors were detected on a HSV110 controller's Fibre Channel port. The identity of the affected Fibre Channel port is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number of the affected Fibre Channel port is contained in the port field. This is an informational event triggered by the occurrence of an excessive number of Tachyon chip link status errors detected within a particular link status error type. The number of occurrences of each link status error type is contained in a separate type-specific field (e.g., loss_of_signal, bad_rx_char, etc.). The HSV110 controller checks each of its Fibre Channel port's for excessive link status errors periodically."
	::= 13601544


sCellEventTrap_6_9 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A physical disk drive has reported numerous failure prediction threshold exceeded errors. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the al_pa field. The missing_port and missing_cerp_id fields are unused. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fed_class field. The num_times field is the number of failure prediction threshold exceeded errors reported by the physical disk drive in the previous minute. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601545


sCellEventTrap_6_a TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A physical disk drive has reported numerous check condition errors. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the al_pa field. The missing_port and missing_cerp_id fields are unused. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fed_class field. The num_times field is the number of check condition errors reported by the physical disk drive in the previous minute. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601546


sCellEventTrap_6_b TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. A non-data exchange sent to a physical disk drive has timed out. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the al_pa field. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fed_class field. The command issued to the physical disk drive is contained in the cmd field. Note that in this case the content of the error field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601547


sCellEventTrap_6_c TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A loop switch has been detected on a Fibre Channel port. The identity of the Fibre Channel port is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number is contained in the port field. Note that in this case the content of the device, al_pa, rack_num, dencl_num, bay, fed_class and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The missing_port and missing_cerp_id fields are unused. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601548


sCellEventTrap_6_d TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The location of a physical disk drive previously reported as unknown is now known. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the al_pa field. The missing_port and missing_cerp_id fields are unused. The location of the physical disk drive is contained in the rack_num, dencl_num, and bay fields. Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of fed_class, al_pa and num_times fields are undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601549


sCellEventTrap_6_e TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit requested a code update but the code update could not be found, so the update was not performed. The identity of the affected Drive Enclosure Environmental Monitoring Unit is contained in the device field. The Fibre Channel port used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the port field. The missing_port and missing_cerp_id fields are unused. The location of the Drive Enclosure Environmental Monitoring Unit is contained in the rack_num and dencl_num fields. Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the al_pa, bay, fed_class and num_times field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601550


sCellEventTrap_6_f TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. The Drive Enclosure Environmental Monitoring Unit is able to communicate with a physical disk drive but this HSV110 controller is unable to communicate with that physical disk drive on the Fibre Channel bus. The identity of the Drive Enclosure Environmental Monitoring Unit is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The missing_port and missing_cerp_id fields are unused. The location of the physical disk drive is contained in the rack_num, dencl_num, and bay fields. Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the al_pa, fed_class and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601551


sCellEventTrap_6_10 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Undetermined -- more information needed to determine severity. A HSV110 controller is unable to communicate with this Drive Enclosure Environmental Monitoring Unit. The Drive Enclosure Environmental Monitoring Unit identified in the device field has stopped communicating with the HSV110 controller. The Fibre Channel port used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the port field. The missing_port and missing_cerp_id fields are unused. The location of the Drive Enclosure Environmental Monitoring Unit is contained in the rack_num and dencl_num fields. Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the bay, al_pa, fed_class and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601552


sCellEventTrap_6_12 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The retry count for a task assigned to a Drive Enclosure Environmental Monitoring Unit has been exhausted. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The peb array contains the task list that was intended to be sent to the Drive Enclosure Environmental Monitoring Unit. The peq_frz_prod_index field contains the task that was being retried. The peq_prod_index field contains the drive enclosure where the physical disk drive used to communicate with the Drive Enclosure Environmental Monitoring Unit is located. The peq_cons_index field identifies the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) used to communicate with the physical disk drive that was used to communicate with the Drive Enclosure Environmental Monitoring Unit. The failure_cause field contains the bay where the physical disk drive used to communicate with the Drive Enclosure Environmental Monitoring Unit."
	::= 13601554


sCellEventTrap_6_13 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A Drive Enclosure Environmental Monitoring Unit is able to communicate with this HSV110 controller. The identity of the Drive Enclosure Environmental Monitoring Unit is contained in the device field. The Fibre Channel port used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the port field. The missing_port and missing_cerp_id fields are unused. The location of the Drive Enclosure Environmental Monitoring Unit is contained in the rack_num and dencl_num fields. Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the bay, fed_class and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601555


sCellEventTrap_6_14 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. There are too many drive enclosures attached to a Fibre Channel port. The Fibre Channel port with too many drive enclosures attached to the HSV110 controller is contained in the cerp_id field. Note that in this case the content of the bay, fed_class, rack_num, dencl_num and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The missing_port and missing_cerp_id fields are unused. The location of the identified in the cerp_id field. The device, missing_port and missing_cerp_id fields are unused. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601556


sCellEventTrap_6_15 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. The cable connected to the I/O module is attached to the wrong Fibre Channel port. The Fibre Channel port incorrectly attached to the HSV110 controller is contained in the cerp_id field. Note that in this case the content of the device, missing_port, missing_cerp_id, bay, fed_class, rack_num, dencl_num and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601557


sCellEventTrap_6_16 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A HSV110 controller does not have an address on the enclosure address bus. The HSV110 controller location cannot be identified. Note that in this case the content of the missing_port, missing_cerp_id, bay, fed_class, rack_num, dencl_num, al_pa, device, cerp_id, port, enclosures array and num_times fields is undefined."
	::= 13601558


sCellEventTrap_6_18 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A Drive Enclosure Environmental Monitoring Unit has begun updating its code. Do not power down this drive enclosure until the code update has completed. The identity of the Drive Enclosure Environmental Monitoring Unit is contained in the device field. The Fibre Channel port used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the port field. The missing_port and missing_cerp_id fields are unused. The location of the Drive Enclosure Environmental Monitoring Unit is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. In addition, the device field may contain all zeroes. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. Note also that the content of the fed_class, al_pa, and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601560


sCellEventTrap_6_19 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A Drive Enclosure Environmental Monitoring Unit has completed updating its code. It is now safe to power down this drive enclosure. The identity of the Drive Enclosure Environmental Monitoring Unit is contained in the device field. The Fibre Channel port used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the port field. The missing_port and missing_cerp_id fields are unused. The location of the Drive Enclosure Environmental Monitoring Unit is contained in the rack_num and dencl_num fields. Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the fed_class, al_pa, and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601561


sCellEventTrap_6_1a TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A physical disk drive has exceeded its soft error threshold. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the al_pa field. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the fed_class, cdb, and sense_data fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601562


sCellEventTrap_6_1b TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A HSV110 controller now has an address on the enclosure address bus. The HSV110 controller location has been identified. The location of the HSV110 controller is contained in the rack_num and dencl_num fields. Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the bay, fed_class, al_pa, cerp_id, port, and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The missing_port and missing_cerp_id fields are unused. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601563


sCellEventTrap_6_1c TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. An outbound frame targeted to a physical disk drive has timed out. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the al_pa field. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fed_class field. The command issued to the physical disk drive is contained in the cmd field. Note that in this case the content of the error field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601564


sCellEventTrap_6_1d TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. A Fibre Channel exchange to a physical disk drive has completed but is missing data. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the al_pa field. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fed_class field. The command issued to the physical disk drive is contained in the cmd field. Note that in this case the content of the error field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601565


sCellEventTrap_6_1e TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A HSV110 controller has detected only one port of a Fibre Channel device. This Fibre Channel device has entered the Single Port on Fibre state which should be corrected as soon as possible. The identity of the Fibre Channel device is contained in the device field. The Fibre Channel port still able to communicate with the Fibre Channel device is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number able to communicate with the Fibre Channel device is contained in the port field. The Fibre Channel port unable to communicate with the Fibre Channel device is contained in the missing_cerp_id field. The HSV110 controller internal Fibre Channel port number unable to communicate with the Fibre Channel device is contained in the missing_port field. The arbitrated loop physical address of the Fibre Channel device is contained in the al_pa field. The location of the Fibre Channel device is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the fed_class, and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601566


sCellEventTrap_6_1f TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A previously reported Fibre Channel device with only one port has been corrected and redundancy has been restored. The device is no longer in the Single Port on Fibre state. The identity of the Fibre Channel device is contained in the device field. The Fibre Channel port used to communicate with the Fibre Channel device is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the Fibre Channel device is contained in the port field. The missing_port and missing_cerp_id fields are unused. The arbitrated loop physical address of the Fibre Channel device is contained in the al_pa field. The location of the Fibre Channel device is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the fed_class, and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601567


sCellEventTrap_6_20 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. An unsupported Fibre Channel device has been detected. The drive has been failed to prevent possible data corruption or system instability. The identity of the Fibre Channel device is contained in the device field. The Fibre Channel port used to communicate with the Fibre Channel device is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the Fibre Channel device is contained in the port field. The arbitrated loop physical address of the Fibre Channel device is contained in the al_pa field. The missing_port and missing_cerp_id fields are unused. The location of the Fibre Channel device is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the fed_class and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601568


sCellEventTrap_6_21 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A Fibre Channel device with the incorrect block size has been detected. The identity of the Fibre Channel device is contained in the device field. The Fibre Channel port used to communicate with the Fibre Channel device is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the Fibre Channel device is contained in the port field. The arbitrated loop physical address of the Fibre Channel device is contained in the al_pa field. The missing_port and missing_cerp_id fields are unused. The location of the Fibre Channel device is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the fed_class and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601569


sCellEventTrap_6_23 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A HSV110 controller is about to retry a failed port. The Fibre Channel port that is about to be retried is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number about to be retried is contained in the port field. Note that in this case the content of the bay, rack_num, fed_class, al_pa, dencl_num, device, and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The missing_port and missing_cerp_id fields are unused. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601571


sCellEventTrap_6_24 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A HSV110 controller has successfully retried a failed port. The Fibre Channel port that has been restarted is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number that has been restarted is contained in the port field. Note that in this case the content of the bay, rack_num, fed_class, al_pa, dencl_num, device, and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The missing_port and missing_cerp_id fields are unused. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601572


sCellEventTrap_6_25 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit has failed to assign a hard address to a physical disk drive on the loop. The device field contains the identity of the enclosure. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The al_pa field contains the expected AL_PA, and the num_times field contains the actual AL_PA. The missing_port and missing_cerp_id fields are unused. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. Note that in this case the content of the fed_class is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601573


sCellEventTrap_6_26 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit has failed to assign an address to a physical disk drive on the loop. This has occurred because another physical disk drive has already obtained this AL_PA. The device field contains the identity of the enclosure. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The al_pa field contains the AL_PA that was stolen. The missing_port and missing_cerp_id fields are unused. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the fed_class and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601574


sCellEventTrap_6_27 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit has failed to assign address(s) to a physical disk drive on the loop. Soft addressing was detected for this enclosure. The device field contains the identity of the enclosure. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The missing_port and missing_cerp_id fields are unused. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the fed_class, al_pa, and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601575


sCellEventTrap_6_28 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The retry count for an OB task assigned to a Drive Enclosure Environmental Monitoring Unit has been exhausted. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The peb array contains the task list that was intended to be sent to the Drive Enclosure Environmental Monitoring Unit. The peq_frz_prod_index field contains the task that was being retried. The peq_prod_index field contains the drive enclosure where the physical disk drive used to communicate with the Drive Enclosure Environmental Monitoring Unit is located. The peq_cons_index field identifies the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) used to communicate with the physical disk drive that was used to communicate with the Drive Enclosure Environmental Monitoring Unit. The failure_cause field contains the bay where the physical disk drive used to communicate with the Drive Enclosure Environmental Monitoring Unit."
	::= 13601576


sCellEventTrap_6_29 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller has sent a Basic Link Service command Abort Sequence Frame. The original work is described in this event. The identity of the intended target is contained in the device field. The Fibre Channel port over which the work was sent is identified in the cerp_id field. The HSV110 controller internal Fibre Channel port over which the work was sent is contained in the port field. The arbitrated loop physical address of the intended target is contained in the al_pa field. The location of the intended target is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fed_class field. The command issued to the intended target is contained in the cmd field. Note that in this case the content of the error field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601577


sCellEventTrap_6_2a TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller has sent an Extended Link Service command Reinstate Recovery Qualifier. The original work is described in this event. The identity of the intended target is contained in the device field. The Fibre Channel port over which the work was sent is identified in the cerp_id field. The HSV110 controller internal Fibre Channel port over which the work was sent is contained in the port field. The arbitrated loop physical address of the intended target is contained in the al_pa field. The location of the intended target is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. The Fibre Channel Exchange Descriptor class is contained in the fed_class field. The command issued to the intended target is contained in the cmd field. Note that in this case the content of the error field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601578


sCellEventTrap_6_2b TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A physical disk drive was bypassed rendering it unusable. The physical disk drive is unusable because a Drive Enclosure Environmental Monitoring Unit bypassed a drive bay or the physical disk drive left itself bypassed. The physical disk drive is not available to the HSV110 controllers and will not be displayed by the HSV element manager GUI. The physical disk drive fault led will be lit to indicate that it is unusable. The Fibre Channel port over which this condition was detected is identified in the cerp_id field. The HSV110 controller internal Fibre Channel port over which this condition was detected is contained in the port field. The al_pa field is invalid. The location of the physical disk drive is as indicated by the content of the rack_num, dencl_num, and bay fields. Note that the content of the rack_num field will not be valid until a future release. The bypass_reason field is used to indicate how the physical disk drive was bypassed: <UL><LI>1 = The physical disk drive left itself bypassed <LI>2 = The Drive Enclosure Environmental Monitoring Unit bypassed the drive bay </UL>The Drive Enclosure Environmental Monitoring Unit is identified in the device field. Additionally, the content of the pid, rev, and enclosures array fields is undefined in this case."
	::= 13601579


sCellEventTrap_6_2c TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. One or more media defects were detected on a physical disk drive. The affected physical disk drive is identified in the device field. The Fibre Channel port over which the media defect(s) was detected is identified in the cerp_id field. The HSV110 controller internal Fibre Channel port number over which the media defect(s) was detected is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the al_pa field. The Logical Block Address of each media defect is contained in a separate entry of the hdr_cdb array. Only nonzero values in the hdr_cdb array entries are valid. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release."
	::= 13601580


sCellEventTrap_6_2d TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. An HSV110 controller issued a directed LIP to an arbitrated loop physical address. The Fibre Channel port over which the directed LIP was issued is identified in the cerp_id field. The HSV110 controller internal Fibre Channel port number over which the directed LIP was issued is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the al_pa field."
	::= 13601581


sCellEventTrap_6_2e TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. An HSV110 controller has detected Loop Receiver Failures. The Fibre Channel port over which the Loop Receiver Failures were detected is identified in the cerp_id field. The HSV110 controller internal Fibre Channel port number over which the Loop Receiver Failures were detected is contained in the port field. The counts and the AL_PAs of the Loop Receiver Failures are contained in a separate entry of the hdr_cdb array. Only nonzero values in the hdr_cdb array entries are valid. The affected HSV110 controller is identified in the device field. Note that in this case the content of the al_pa, dencl_num, bay, and rack_num fields are undefined."
	::= 13601582


sCellEventTrap_6_30 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A HSV110 controller has detected only one port of all Fibre Channel devices in an enclosure. These Fibre Channel devices have entered the Single Port on Fibre state which should be corrected as soon as possible. The identity of the Fibre Channel device enclosure is contained in the device field. The Fibre Channel port still able to communicate with the Fibre Channel device is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number able to communicate with the Fibre Channel device is contained in the port field. The Fibre Channel port unable to communicate with the Fibre Channel device is contained in the missing_cerp_id field. The HSV110 controller internal Fibre Channel port number unable to communicate with the Fibre Channel device is contained in the missing_port field. The al_pa and bay fields are invalid. The location of the Fibre Channel enclosure is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the fed_class, and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601584


sCellEventTrap_6_31 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A previously reported Fibre Channel device enclosure with only one port has been corrected and redundancy has been restored. The devices in the enclosure are no longer in the Single Port on Fibre state. The identity of the Fibre Channel device enclosure is contained in the device field. The Fibre Channel port used to communicate with the Fibre Channel device enclosure is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the Fibre Channel device is contained in the port field. The al_pa, bay, missing_port, and missing_cerp_id fields are invalid. The location of the Fibre Channel device is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the fed_class, and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601585


sCellEventTrap_6_32 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A HSV110 controller has detected only one port of all Fibre Channel devices on a loop. These Fibre Channel devices have entered the Single Port on Fibre state which should be corrected as soon as possible. The device, al_pa, dencl_num, and bay fields are all invalid. The Fibre Channel port still able to communicate with the Fibre Channel device is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number able to communicate with the Fibre Channel device is contained in the port field. The Fibre Channel port unable to communicate with the Fibre Channel device is contained in the missing_cerp_id field. The HSV110 controller internal Fibre Channel port number unable to communicate with the Fibre Channel device is contained in the missing_port field."
	::= 13601586


sCellEventTrap_6_33 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A previously reported Fibre Channel loop with only one port has been corrected and redundancy has been restored. The devices on the loop are no longer in the Single Port on Fibre state. The device, al_pa, dencl_num, bay, missing_port, and missing_cerp_id fields are invalid. The Fibre Channel port used to communicate with the Fibre Channel devices is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the Fibre Channel devices is contained in the port field."
	::= 13601587


sCellEventTrap_6_34 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A HSV110 controller has been told to enable a device port, and that device port was not disabled during boot diagnostics. The Fibre Channel port that was enabled is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number enabled is contained in the port field. Note that in this case the contents of the bay, rack_num, fed_class, al_pa, dencl_num, device, enclosure array, and num_times fields are undefined. The missing_port and missing_cerp_id fields are unused."
	::= 13601588


sCellEventTrap_6_35 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. An unrecognized Fibre Channel physical disk drive firmware revision has been detected by the physical disk drive firmware load process. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the al_pa field. The bypass_reason field is invalid. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num, al_pa and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. The pid field contains the SCSI Inquiry Product Identification obtained from the physical disk drive. The rev field contains the current firmware revision obtained from the physical disk drive. The new_rev field contains the latest firmware version known to the controller, or blanks if the isn't a known version. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601589


sCellEventTrap_6_36 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. An unsupported Fibre Channel physical disk drive firmware revision has been detected by the physical disk drive firmware load process. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the al_pa field. The bypass_reason field is invalid. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num, al_pa and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. The pid field contains the SCSI Inquiry Product Identification obtained from the physical disk drive. The rev field contains the current firmware revision obtained from the physical disk drive. The new_rev field contains the latest firmware version known to the controller, or blanks if the isn't a known version. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601590


sCellEventTrap_6_37 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A Fibre Channel physical disk drive firmware revision has been detected by the physical disk drive firmware load process that is later than the latest known supported revision. If the location information is 0, it indicates the type of drive, not a specific drive. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the al_pa field. The bypass_reason field is invalid. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num, al_pa and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. The pid field contains the SCSI Inquiry Product Identification obtained from the physical disk drive. The rev field contains the current firmware revision obtained from the physical disk drive. The new_rev field contains the latest firmware version known to the controller, or blanks if the isn't a known version. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601591


sCellEventTrap_6_38 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A Fibre Channel physical disk drive firmware revision has been detected by the physical disk drive firmware load process that has a newer supported revision available. If the location information is 0, it indicates the type of drive, not a specific drive. The identity of the physical disk drive is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The arbitrated loop physical address of the physical disk drive is contained in the al_pa field. The bypass_reason field is invalid. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num, al_pa and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. The pid field contains the SCSI Inquiry Product Identification obtained from the physical disk drive. The rev field contains the current firmware revision obtained from the physical disk drive. The new_rev field contains the latest firmware version known to the controller, or blanks if the isn't a known version. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13601592


sCellEventTrap_6_39 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller bypassed a device bay in an attempt to restore operability. The identity of the bay is indicated by the rack_num, dencl_num, and bay fields. All other fields are invalid."
	::= 13601593


sCellEventTrap_6_3a TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller is attempting to recovery devices on the indicated port. All other fields are invalid."
	::= 13601594


sCellEventTrap_6_3b TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller has finished error recovery attempts on the indicated port. All other fields are invalid."
	::= 13601595


sCellEventTrap_6_3c TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller been requested to unbypass device bays on the indicated port. All other fields are invalid."
	::= 13601596


sCellEventTrap_6_3d TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Undetermined -- more information needed to determine severity. The HSV110 controller has detected a enclosure on the CAB bus that does not have a Fibre Channel connection. All fields except port and rack are invalid. other fields are invalid."
	::= 13601597


sCellEventTrap_6_3e TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. The HSV110 controller has detected an enclosure on the Fibre Channel but is unable to communicate with the EMU on the CAB bus or the EMU is reporting an invalid enclosure number. All fields except port and rack are invalid. other fields are invalid."
	::= 13601598


sCellEventTrap_7_0 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. Allocation of a Virtual Disk has stalled due to insufficient space in the Disk Group caused by the failure or pulling of a physical disk drive. The tag1 field contains the identity of the Virtual Disk. The tag2 field contains the identity of the Disk Group. The values that may be found in the state field are as follows: <UL><LI>0 = Attempting to retry the allocation <LI>1 = Awaiting a leveling event (a drive needs to be inserted) </UL>"
	::= 13601792


sCellEventTrap_7_1 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. Expansion of a Virtual Disk has stalled due to insufficient space in the Disk Group caused by the failure or pulling of a physical disk drive. The tag1 field contains the identity of the Virtual Disk. The tag2 field contains the identity of the Disk Group. The values that may be found in the state field are as follows: <UL><LI>0 = Attempting to retry the expansion <LI>1 = Awaiting a leveling event (a drive needs to be inserted) </UL>"
	::= 13601793


sCellEventTrap_7_2 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. Leveling of capacity in a Disk Group has started. The identity of the Disk Group is contained in the tag1 field."
	::= 13601794


sCellEventTrap_7_3 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. Leveling of capacity in a Disk Group has finished. The identity of the Disk Group is contained in the tag1 field."
	::= 13601795


sCellEventTrap_7_4 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A member management operation has started due to the appearance or disappearance of a physical disk drive. If available, the tag1 field contains the identity of the physical disk drive. The tag2 field contains the disk unit block in which physical disk drive resides. The values that may be found in the state field are as follows: <UL><LI>2 = Reconstructing <LI>4 = Migrating <LI>6 = Reverting </UL>"
	::= 13601796


sCellEventTrap_7_5 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A member management operation has finished. If available, the tag1 field contains the identity of the physical disk drive. The tag2 field contains the disk unit block in which the physical disk drive resides. The values that may be found in the state field are as follows: <UL><LI>2 = Reconstructing <LI>4 = Migrating <LI>6 = Reverting </UL>The status field contains one of the following values: <UL><LI>1 = PSEGS NONE ( Reconstruction of data was successful ) <LI>2 = PSEGS RAID0 ( Could not reconstruct RAID0 data ) <LI>4 = PSEGS RAID5 ( Could not reconstruct RAID5 data ) <LI>8 = PSEGS RAID1 ( Could not reconstruct RAID1 data ) </UL>"
	::= 13601797


sCellEventTrap_7_6 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A Disk Group has started changing its internal structure due to the appearance or disappearance of a Volume. The identity of the Disk Group is contained in the tag1 field. The values that may be found in the state field are as follows: <UL><LI>4 = Merge began <LI>8 = Split began </UL>"
	::= 13601798


sCellEventTrap_7_7 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A Disk Group has finished changing its internal structure due to the appearance or disappearance of a volume. The identity of the Disk Group is contained in the tag1 field. The values that may be found in the state field are as follows: <UL><LI>4 = Merge completed <LI>8 = Split completed </UL>"
	::= 13601799


sCellEventTrap_7_8 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. Deallocation of a Virtual Disk has failed after three attempts due to unknown circumstances. This will more than likely be caused by failing physical drives. The deletion will be restarted when a resync/reboot occurs. The tag1 field contains the identity of the Virtual Disk. The tag2 field contains the identity of the Disk Group. The values that may be found in the status field indicate the returned status from the delete operation."
	::= 13601800


sCellEventTrap_9_1 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The state of the Physical Disk Drive identified in the handle field has transitioned to the NORMAL state. The value.ul1 field contains the new state: 1 (NORMAL). The value.ul2 field contains the old state. The state values that may be in the value.ul2 field are as follows: <UL><LI>2 = Degraded <LI>3 = Failed <LI>4 = Not present <LI>5 = Single Port on Fibre </UL>The enclosure number, bay number, and rack number where the Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], attribute.value.u32[2] fields, respectively. The attribute.type field contains value 1. The rack number in the attribute.value.u32[2] field will not contain a valid value until a future release."
	::= 13602305


sCellEventTrap_9_2 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The state of a Volume has changed. The identity of the affected Volume is contained in the handle field. The add_handle field contains the identity of the Physical Disk Drive that is associated with that Volume. The enclosure number, bay number, and rack number where the associated Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], and attribute.value.u32[2] fields, respectively. The internal identification of that Volume's Redundant Storage Set is contained in the attribute.value.u32[3] field. The attribute.type field contains the value of 1. The value.ul1 field contains the new state. The value.ul2 field contains the old state. The state values that may be found in the value.ul1 and value.ul2 fields are as follows: <UL><LI>1 = Normal - Volume is present and operating normally <LI>2 = Migrating - Data from this volume is being moved to other storage in this Disk Group <LI>3 = Missing - Volume is inaccessible <LI>4 = Reconstructing - Volume is inaccessible; redundant data is being regenerated and moved to other storage in this Disk Group <LI>5 = Completing - This previously inaccessible volume has become accessible; data migration is being completed <LI>6 = Reverting - This previously inaccessible volume has become accessible; data is being regenerated <LI>7 = Failed - Volume is not being used in the Disk Group; disk errors are preventing normal usage </UL>"
	::= 13602306


sCellEventTrap_9_3 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The state of the internal Logical Disk associated with the Virtual Disk identified in the handle field has changed. The value.ul1 field contains the new state. The value.ul2 field contains the old state. The state values that may be found in the value.ul1 and value.ul2 fields are as follows: <UL><LI>1 = Normal <LI>2 = Replacement delay in progress <LI>3 = Redundancy lost, restore in progress <LI>4 = Redundancy lost, restore stalled <LI>5 = Failed <LI>6 = Creation in progress <LI>7 = Snapshot is inoperative due to lack of snapshot space <LI>8 = Deletion in progress <LI>9 = Capacity change in progress <LI>10 = Inoperative due to data lost <LI>11 = Capacity reservation in progress <LI>12 = Capacity unreservation in progress </UL>"
	::= 13602307


sCellEventTrap_9_4 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The state of the HSV110 controller identified in the handle field has transitioned to the NORMAL state. The value.ul1 field contains the new state: 1 (NORMAL). The value.ul2 field contains the old state: 3 (FAILED)."
	::= 13602308


sCellEventTrap_9_5 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The state of a battery assembly within the HSV110 controller identified in the handle field has changed. The value.ul1 field contains the new state. The value.ul2 field contains the old state. The state values that may be found in the value.ul1 and value.ul2 fields are as follows: <UL><LI>1 = Battery System Hold-up Time is greater than 96 hours <LI>3 = Battery System Hold-up Time is greater than 0 and less than 96 hours <LI>5 = Battery System Hold-up Time is zero hours </UL>"
	::= 13602309


sCellEventTrap_9_6 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Undetermined -- more information needed to determine severity. A Volume has transitioned to the MISSING state. The affected Volume is identified in the handle field. The add_handle field contains the identity of the Physical Disk Drive that is associated with that Volume. The enclosure number, bay number, and rack number where the associated Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], and attribute.value.u32[2] fields, respectively. The internal identification of that Volume's Redundant Storage Set is contained in the attribute.value.u32[3] field. The attribute.type field contains the value of 1. The value.ul1 field contains the new state. The value.ul2 field contains the old state. The state values that may be found in the value.ul1 and value.ul2 fields are as follows: <UL><LI>1 = Normal - Volume is present and operating normally <LI>2 = Migrating - Data from this volume is being moved to other storage in this Disk Group <LI>4 = Reconstructing - Volume is inaccessible; redundant data is being regenerated and moved to other storage in this Disk Group <LI>5 = Completing - This previously inaccessible volume has become accessible; data migration is being completed <LI>6 = Reverting - This previously inaccessible volume has become accessible; data is being regenerated <LI>7 = Failed - Volume is not being used in the Disk Group; disk errors are preventing normal usage </UL>"
	::= 13602310


sCellEventTrap_9_7 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The state of the Fibre Channel port identified in the attribute.value.str field and located on the rear panel of the HSV110 controller identified in the handle field has transitioned to the NORMAL state. The attribute.type field contains the value 4. The value.ul1 field contains the new state: 1 (NORMAL). The value.ul2 field contains the old state: 2 (FAILED). <P> Note that the HSV110 controller's internal identity of the affected Fibre Channel port is contained in the secondary_id field."
	::= 13602311


sCellEventTrap_9_8 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. The Occupancy Alarm Level threshold has been reached for the Disk Group identified in the handle field."
	::= 13602312


sCellEventTrap_9_9 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Resource Availability state of a Volume has transitioned to the SUFFICIENT state. The affected Volume is identified in the handle field. The add_handle field contains the identity of the Physical Disk Drive that is associated with that Volume. The enclosure number, bay number, and rack number where the associated Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], and attribute.value.u32[2] fields, respectively. The internal identification of that Volume's Redundant Storage Set is contained in the attribute.value.u32[3] field. The attribute.type field contains the value of 1. The value.ul1 field contains the new state: 0 (SUFFICIENT). The value.ul2 field contains the old state: 1 (INSUFFICIENT)."
	::= 13602313


sCellEventTrap_9_a TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Data Availability state of the internal Logical Disk associated with the Virtual Disk identified in the handle field has transitioned to the NORMAL state. The value.ul1 field contains the new state: 0 (NORMAL). The value.ul2 field contains the old state: 1 (DATA LOST)."
	::= 13602314


sCellEventTrap_9_c TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Snapclone Logical Disk identified in the handle field has completed the unsharing operation. The secondary_id field contains the noid of the associated successor internal Logical Disk."
	::= 13602316


sCellEventTrap_9_d TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The state of the Quorum Disk flag of a Volume has changed. The affected Volume is identified in the handle field. The value.ul1 field contains the new state of the Quorum Disk flag. The value.ul2 field contains the old state of the Quorum Disk flag. The state values that may be found in the value.ul1 and value.ul2 fields are as follows: <UL><LI>0 = Not quorum disk <LI>1 = Quorum disk </UL>"
	::= 13602317


sCellEventTrap_9_e TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. The temperature trip point for a temperature sensor located within an HSV110 controller has been reached. The HSV110 controller is identified in the handle field. The value.ul1 field contains the current temperature reading from I2C sensor 1 in degrees celsius while the value.ul2 field contains the adjusted reading from I2C sensor 2. The set temperature trip point is contained in the secondary_id field."
	::= 13602318


sCellEventTrap_9_f TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. The temperature within the HSV110 controller identified in the handle field is approaching its trip point. The value.ul1 field contains the current temperature reading from I2C sensor 1 in degrees celsius while the value.ul2 field contains the adjusted reading from I2C sensor 2. The secondary_id field contains the set temperature trip point in Celsius."
	::= 13602319


sCellEventTrap_9_11 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Blower Present flag for the '1' blower assembly located within the HSV110 controller identified in the handle field has transitioned from the NOT PRESENT to PRESENT state indicating that the blower has been reinstalled. The secondary_id field contains the '1' blower assembly internal identifier value: 1. The value.ul1 field contains the new state of the Blower Present flag: 1 (PRESENT). The value.ul2 field contains the old state of the Blower Present flag: 0 (NOT PRESENT)."
	::= 13602321


sCellEventTrap_9_12 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. The '1' blower located within the HSV110 controller identified in the handle field is running slower than the lowest acceptable speed. The secondary_id field contains the '1' blower assembly internal identifier value: 1. The value.ul1 field contains the current speed of the '1' blower. The value.ul2 field contains the lowest acceptable speed for the '1' blower."
	::= 13602322


sCellEventTrap_9_13 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. One of the voltage sensors located within the HSV110 controller identified in the handle field has reported a voltage that is out of range. The value.ul1 field contains the out of range voltage value. The secondary_id field contains the specific voltage threshold value (i.e., 12V, 5V, 3.3V, 2.5V or 2V). Note that the voltages are expressed in millivolts--e.g.,12.5V is expressed as 12500."
	::= 13602323


sCellEventTrap_9_14 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Undetermined -- more information needed to determine severity. The state of a Volume has transitioned to the FAILED state. The affected Volume is identified in the handle field. The add_handle field contains the identity of the Physical Disk Drive that is associated with that Volume. The enclosure number, bay number, and rack number where the associated Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], and attribute.value.u32[2] fields, respectively. The internal identification of that Volume's Redundant Storage Set is contained in the attribute.value.u32[3] field. The attribute.type field contains the value of 1. The value.ul1 field contains the new state: 7 (FAILED). The value.ul2 field contains the old state. The state values that may be found in the value.ul2 fields are as follows: <UL><LI>1 = Normal - Volume is present and operating normally <LI>2 = Migrating - Data from this volume is being moved to other storage in this Disk Group <LI>3 = Missing - Volume is inaccessible <LI>4 = Reconstructing - Volume is inaccessible; redundant data is being regenerated and moved to other storage in this Disk Group <LI>5 = Completing - This previously inaccessible volume has become accessible; data migration is being completed <LI>6 = Reverting - This previously inaccessible volume has become accessible; data is being regenerated </UL>"
	::= 13602324


sCellEventTrap_9_15 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Undetermined -- more information needed to determine severity. An HSV110 controller has failed. The state of the HSV110 controller identified in the handle field has transitioned to the FAILED state. The value.ul1 field contains the new state: 3 (FAILED). The value.ul2 field contains the old state: 1 (NORMAL)."
	::= 13602325


sCellEventTrap_9_16 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The temperature within the HSV110 controller identified in the handle field has returned to its normal operating range. The value.ul1 field contains the current temperature reading in celsius from I2C sensor 1, while the value.ul2 field contains the adjusted reading from I2C sensor 2."
	::= 13602326


sCellEventTrap_9_17 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. An HSV110 controller's battery assembly has been removed. The Battery Present flag for battery assembly '1' located within the HSV110 controller identified in the handle field has changed from PRESENT to NOT PRESENT indicating that the battery assembly was removed. The secondary_id field contains the battery assembly '1' internal identifier value: 1. The value.ul1 field contains the new state of the Battery Present flag: 0 (NOT PRESENT). The value.ul2 field contains the old state of the Battery Present flag: 1 (PRESENT)."
	::= 13602327


sCellEventTrap_9_18 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Battery In Use flag for battery assembly '1' located within the HSV110 controller identified in the handle field has transitioned from the NOT IN USE to IN USE state indicating that the battery assembly is functioning properly. The secondary_id field contains the battery assembly '1' internal identifier value: 1. The value.ul1 field contains the new state of the Battery In Use flag: 1 (IN USE). The value.ul2 field contains the old state of the Battery In Use flag: 0 (NOT IN USE)."
	::= 13602328


sCellEventTrap_9_19 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. One of the voltage sensors located within the HSV110 controller identified in the handle field has reported a voltage that indicates that a voltage that was previously out of range has returned to the normal range. The value.ul1 field contains the normal range voltage value. The secondary_id field contains the voltage threshold value (i.e., 12V, 5V, 3.3V, 2.5V or 2V). Note that the voltages are expressed in thousands--e.g., 12.5V is expressed as 12500."
	::= 13602329


sCellEventTrap_9_1a TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. The battery assembly voltage regulator located within the HSV110 controller identified in the handle field is offline."
	::= 13602330


sCellEventTrap_9_1b TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The state of the Disk Group identified in the handle field has transitioned to the NORMAL state. The value.ul1 field contains the new Disk Group state: 1 (NORMAL). The value.ul2 field contains the old Disk Group state. The state values that may be found in the value.ul2 field are as follows: <UL><LI>2 = Disk Group with no redundancy is inoperative <LI>3 = Disk Group with parity redundancy is inoperative <LI>4 = Disk Group with mirrored redundancy is inoperative <LI>5 = Disk Group with no redundancy is inoperative, marked for re-use <LI>6 = Disk Group with parity redundancy is inoperative, marked for re-use <LI>7 = Disk Group with mirrored redundancy is inoperative, marked for re-use </UL>"
	::= 13602331


sCellEventTrap_9_1c TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Occupancy Alarm Level for the Disk Group identified in the handle field has returned to the normal range."
	::= 13602332


sCellEventTrap_9_1d TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. An HSV110 controller's battery assembly has malfunctioned. The Battery In Use flag for battery assembly '1' located within the HSV110 controller identified in the handle field has transitioned from the IN USE to NOT IN USE state indicating that the battery assembly has malfunctioned. The secondary_id field contains the battery assembly '1' internal identifier value: 1. The value.ul1 field contains the new state of the Battery In Use flag: 0 (NOT IN USE). The value.ul2 field contains the old state of the Battery In Use flag: 1 (IN USE)."
	::= 13602333


sCellEventTrap_9_1e TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Battery Present flag for battery assembly '1' located within the HSV110 controller identified in the handle field has changed from NOT PRESENT to PRESENT indicating that the battery assembly was reinstalled. The secondary_id field contains the battery assembly '1' internal identifier value: 1. The value.ul1 field contains the new state of the Battery Present flag: 1 (PRESENT). The value.ul2 field contains the old state of the Battery Present flag: 0 (NOT PRESENT)."
	::= 13602334


sCellEventTrap_9_1f TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. An HSV110 controller's battery assembly has been removed. The Battery Present flag for battery assembly '2' located within the HSV110 controller identified in the handle field has changed from PRESENT to NOT PRESENT indicating that the battery assembly was removed. The secondary_id field contains the battery assembly '2' internal identifier value: 2. The value.ul1 field contains the new state of the Battery Present flag: 0 (NOT PRESENT). The value.ul2 field contains the old state of the Battery Present flag: 1 (PRESENT)."
	::= 13602335


sCellEventTrap_9_20 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Battery Present flag for battery assembly '2' located within the HSV110 controller identified in the handle field has changed from NOT PRESENT to PRESENT indicating that the battery assembly was reinstalled. The secondary_id field contains the battery assembly '2' internal identifier value: 2. The value.ul1 field contains the new state of the Battery Present flag: 1 (PRESENT). The value.ul2 field contains the old state of the Battery Present flag: 0 (NOT PRESENT)."
	::= 13602336


sCellEventTrap_9_21 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Battery In Use flag for battery assembly '2' located within the HSV110 controller identified in the handle field has transitioned from the NOT IN USE to IN USE state indicating that the battery assembly is functioning properly. The secondary_id field contains the battery assembly '2' internal identifier value: 2. The value.ul1 field contains the new state of the Battery In Use flag: 1 (IN USE). The value.ul2 field contains the old state of the Battery In Use flag: 0 (NOT IN USE)."
	::= 13602337


sCellEventTrap_9_22 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. An HSV110 controller's battery assembly has malfunctioned. The Battery In Use flag for battery assembly '2' located within the HSV110 controller identified in the handle field has transitioned from the IN USE to NOT IN USE state indicating that the battery assembly has malfunctioned. The secondary_id field contains the battery assembly '2' internal identifier value: 2. The value.ul1 field contains the new state of the Battery In Use flag: 0 (NOT IN USE). The value.ul2 field contains the old state of the Battery In Use flag: 1 (IN USE)."
	::= 13602338


sCellEventTrap_9_23 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. The Blower Present flag for the '2' blower assembly located within the HSV110 controller identified in the handle field has transitioned from the PRESENT to NOT PRESENT state indicating that the blower has been removed. The secondary_id field contains the '2' blower assembly internal identifier value: 2. The value.ul1 field contains the new state of the Blower Present flag: 0 (NOT PRESENT). The value.ul2 field contains the old state of the Blower Present flag: 1 (PRESENT)."
	::= 13602339


sCellEventTrap_9_24 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Blower Present flag for the '2' blower assembly located within the HSV110 controller identified in the handle field has transitioned from the NOT PRESENT to PRESENT state indicating that the blower has been reinstalled. The secondary_id field contains the '2' blower assembly internal identifier value: 2. The value.ul1 field contains the new state of the Blower Present flag: 1 (PRESENT). The value.ul2 field contains the old state of the Blower Present flag: 0 (NOT PRESENT)."
	::= 13602340


sCellEventTrap_9_25 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. The '2' blower located within the HSV110 controller identified in the handle field is running slower than the lowest acceptable speed. The secondary_id field contains the '2' blower assembly internal identifier value: 2. The value.ul1 field contains the current speed of the '2' blower. The value.ul2 field contains the lowest acceptable speed for the '2' blower."
	::= 13602341


sCellEventTrap_9_26 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. An HSV110 controller's '1' blower/power supply assembly has been removed or AC power has been removed from the power supply. The HSV110 controller is identified in the handle field. The secondary_id field contains the '1' blower/power supply assembly internal identifier value: 1. The value.ul1 field contains the new state of the Blower/Power Supply Present flag: 0 (NOT PRESENT). The value.ul2 field contains the old state of the Blower/Power Supply Present flag: 1 (PRESENT)."
	::= 13602342


sCellEventTrap_9_27 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. An HSV110 controller's '1' blower/power supply assembly has been reinstalled or AC power has been restored to the power supply. The HSV110 controller is identified in the handle field. The secondary_id field contains the '1' blower/power supply assembly internal identifier value: 1. The value.ul1 field contains the new state of the Blower/Power Supply Present flag: 1 (PRESENT). The value.ul2 field contains the old state of the Blower/Power Supply Present flag: 0 (NOT PRESENT)."
	::= 13602343


sCellEventTrap_9_28 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. An HSV110 controller's '2' blower/power supply assembly has been removed or AC power has been removed from the power supply. The HSV110 controller is identified in the handle field. The secondary_id field contains the '2' blower/power supply assembly internal identifier value: 2. The value.ul1 field contains the new state of the Blower/Power Supply Present flag: 0 (NOT PRESENT). The value.ul2 field contains the old state of the Blower/Power Supply Present flag: 1 (PRESENT)."
	::= 13602344


sCellEventTrap_9_29 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. An HSV110 controller's '2' blower/power supply assembly has been reinstalled or AC power has been restored to the power supply. The HSV110 controller is identified in the handle field. The secondary_id field contains the '2' blower/power supply assembly internal identifier value: 2. The value.ul1 field contains the new state of the Blower/Power Supply Present flag: 1 (PRESENT). The value.ul2 field contains the old state of the Blower/Power Supply Present flag: 0 (NOT PRESENT)."
	::= 13602345


sCellEventTrap_9_2a TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. The '1' blower/power supply located within the HSV110 controller identified in the handle field is running slower than the lowest acceptable speed. The secondary_id field contains the '1' blower/power supply assembly internal identifier value: 1. The value.ul1 field contains the current speed of the '1' blower/power supply. The value.ul2 field contains the lowest acceptable speed for the '1' blower/power supply."
	::= 13602346


sCellEventTrap_9_2b TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. The '2' blower/power supply located within the HSV110 controller identified in the handle field is running slower than the lowest acceptable speed. The secondary_id field contains the '2' blower/power supply assembly internal identifier value: 2. The value.ul1 field contains the current speed of the '2' blower/power supply. The value.ul2 field contains the lowest acceptable speed for the '2' blower/power supply."
	::= 13602347


sCellEventTrap_9_2c TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. The state of a battery assembly within the HSV110 controller identified in the handle field has transitioned to the Battery System Hold-up Time is zero hours state. The value.ul1 field contains the new state 5: (Battery System Hold-up Time is zero hours). The value.ul2 field contains the old state. The state values that may be found in the value.ul2 field are as follows: <UL><LI>1 = Battery System Hold-up Time is greater than 96 hours <LI>3 = Battery System Hold-up Time is greater than 0 and less than 96 hours <LI>5 = Battery System Hold-up Time is zero hours </UL>"
	::= 13602348


sCellEventTrap_9_2d TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Undetermined -- more information needed to determine severity. The Resource Availability state of a Volume has transitioned to the INSUFFICIENT state. The affected Volume is identified in the handle field. The add_handle field contains the identity of the Physical Disk Drive that is associated with that Volume. The enclosure number, bay number, and rack number where the associated Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], and attribute.value.u32[2] fields, respectively. The internal identification of that Volume's Redundant Storage Set is contained in the attribute.value.u32[3] field. The attribute.type field contains the value of 1. The value.ul1 field contains the new state: 1 (INSUFFICIENT). The value.ul2 field contains the old state: 0 (SUFFICIENT)."
	::= 13602349


sCellEventTrap_9_2e TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller identified in the handle field rejected a login attempt. The value.ul1 and value.ul2 fields contain words [0] and [1], respectively, of the World Wide Name of the host adapter that originated the rejected login attempt. The secondary_id field contains the reason for the rejection as follows: <UL><LI>50 = The host is already logged in <LI>101 = Maximum number of logins is exceeded <LI>102 = Invalid cookie was sent <LI>106 = The password is not set on the HSV110 controller </UL>"
	::= 13602350


sCellEventTrap_9_2f TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller identified in the handle field processed a Storage System Management Interface command with the result of non-success return code. The value.ul1 field contains internal the command type. The value.ul2 field contains the internal return code. The attribute.value.obj field contains the internal target and internal version of the command."
	::= 13602351


sCellEventTrap_9_30 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller identified in the handle field has updated the physical disk drive map for the loop pair identified in the secondary_id field. The value.ul1 field contains the new internal map generation number. The value.ul2 field contains the old internal map generation number."
	::= 13602352


sCellEventTrap_9_31 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. The state of the Physical Disk Drive identified in the handle field has transitioned to the DEGRADED state. The value.ul1 field contains the new state: 2 (DEGRADED). The value.ul2 field contains the old state. The state values that may be in the value.ul2 field are as follows: <UL><LI>1 = Normal <LI>3 = Failed <LI>4 = Not present <LI>5 = Single Port on Fibre </UL>The enclosure number, bay number, and rack number where the Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], attribute.value.u32[2] fields, respectively. The attribute.type field contains value 1. The rack number in the attribute.value.u32[2] field will not contain a valid value until a future release."
	::= 13602353


sCellEventTrap_9_32 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. The state of the Physical Disk Drive identified in the handle field has transitioned to the FAILED state. The value.ul1 field contains the new state: 3 (FAILED). The value.ul2 field contains the old state. The state values that may be in the value.ul2 field are as follows: <UL><LI>1 = Normal <LI>2 = Degraded <LI>4 = Not present <LI>5 = Single Port on Fibre </UL>The enclosure number, bay number, and rack number where the Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], attribute.value.u32[2] fields, respectively. The attribute.type field contains value 1. The rack number in the attribute.value.u32[2] field will not contain a valid value until a future release."
	::= 13602354


sCellEventTrap_9_33 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Derived Unit identified in the handle field was created. The add_handle field contains the identity of the Storage System Virtual Disk that is associated with that Derived Unit. The attribute.value.obj field contains the identity of the Virtual Disk associated with that Derived Unit."
	::= 13602355


sCellEventTrap_9_34 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The internal Logical Disk associated with the Virtual Disk identified in the handle field was created. The add_handle field contains the identity of the Disk Group where this internal Logical Disk was created. The attribute.value.u64[0] field contains the size (in blocks) of the internal Logical Disk. The attribute.value.u32[2] field contains the redundancy type of the internal Logical Disk. The attribute.type field contains the value 5. The values that may be found in the attribute.value.u32[2] field are as follows: <UL><LI>1 = Vraid0 <LI>2 = Vraid1 <LI>3 = Vraid5 </UL>"
	::= 13602356


sCellEventTrap_9_35 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Disk Group identified in the handle field was created. The attribute.value.u32[0] field contains the number of physical disk drives within the Disk Group. The attribute.type field contains the value 1."
	::= 13602357


sCellEventTrap_9_36 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Physical Disk Drive identified in the handle field was discovered. The enclosure, bay and rack where the Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1] and attribute.value.u32[2] fields, respectively. The attribute.type field contains the value 1."
	::= 13602358


sCellEventTrap_9_37 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Presented Unit identified in the handle field was created. The add_handle field contains the identity of the Storage System Virtual Disk that is associated with the Presented Unit. This Presented Unit is associated with the Virtual Disk identified in the attribute.value.obj.handle field. The add_handle2 field contains the associated Storage System Host path, and add_data[0] and add_data[1] contains the host LUN number."
	::= 13602359


sCellEventTrap_9_38 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Storage System Host path identified in the handle field was created."
	::= 13602360


sCellEventTrap_9_39 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Storage System Virtual Disk identified in the handle field was created."
	::= 13602361


sCellEventTrap_9_3a TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A Volume was created. The Volume is identified in the handle field. The add_handle field contains the identity of the Physical Disk Drive that is associated with that Volume. The enclosure number, bay number, and rack number where the associated Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], and attribute.value.u32[2] fields, respectively. The attribute.type field contains the value of 1."
	::= 13602362


sCellEventTrap_9_3b TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Derived Unit identified in the handle field was deleted. The add_handle field contains the identity of the Storage System Virtual Disk that was associated with the Derived Unit. This Derived Unit is associated with the Virtual Disk identified in the attribute.value.obj.handle field."
	::= 13602363


sCellEventTrap_9_3c TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The internal Logical Disk associated with the Virtual Disk identified in the handle field was deleted."
	::= 13602364


sCellEventTrap_9_3d TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Disk Group identified in the handle field was deleted."
	::= 13602365


sCellEventTrap_9_3e TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. The Physical Disk Drive identified in the handle field has disappeared. The enclosure, bay and rack where the Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1] and attribute.value.u32[2] fields, respectively. The attribute.type field contains the value 1."
	::= 13602366


sCellEventTrap_9_3f TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Presented Unit identified in the handle field was deleted. The add_handle field contains the identity of the Storage System Virtual Disk that was associated with the Presented Unit. This Presented Unit is associated with the Virtual Disk identified in the attribute.value.obj.handle field."
	::= 13602367


sCellEventTrap_9_40 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Storage System Host path identified in the handle field was deleted."
	::= 13602368


sCellEventTrap_9_41 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Storage System Virtual Disk identified in the handle field was deleted. The Storage System Virtual Disk is associated with the Virtual Disk identified in the add_handle field."
	::= 13602369


sCellEventTrap_9_43 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller identified in the handle field has joined the Storage System. If the handle field is zero, the HSV110 controller identity could not be obtained due to an unexpected state transition."
	::= 13602371


sCellEventTrap_9_44 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Undetermined -- more information needed to determine severity. An HSV110 controller has left the Storage System. The HSV110 controller is identified in the handle field. If the handle field is zero, the HSV110 controller identity could not be obtained due to an unexpected state transition."
	::= 13602372


sCellEventTrap_9_45 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A Storage System has been deleted by an HSV110 controller. The Storage System is identified in the handle field. The HSV110 controller is identified in the add_handle field. If the handle field or add_handle field is zero, the corresponding identity could not be obtained due to an unexpected state transition."
	::= 13602373


sCellEventTrap_9_46 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Data Replication Group identified in the handle field was created."
	::= 13602374


sCellEventTrap_9_47 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Data Replication Group identified in the handle field was deleted."
	::= 13602375


sCellEventTrap_9_48 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The internal Logical Disk associated with the Snapshot Virtual Disk identified in the handle field was created. The add_handle field contains the identity of the Disk Group where this internal Logical Disk was created. The attribute.value.u64[0] field contains the size (in blocks) of the reserved capacity of the internal Logical Disk. The attribute.value.u32[2] field contains the redundancy type of the internal Logical Disk. The attribute.value.u32[3] field contains the noid of the associated successor internal Logical Disk. The attribute.type field contains the value 6. The values that may be found in the attribute.value.u32[2] field are as follows: <UL><LI>1 = Vraid0 <LI>2 = Vraid1 <LI>3 = Vraid5 </UL>"
	::= 13602376


sCellEventTrap_9_49 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The internal Logical Disk associated with the Copy of the Virtual Disk identified in the handle field was created. The add_handle field contains the identity of the Disk Group where this internal Logical Disk was created. The attribute.value.u64[0] field contains the size (in blocks) of the reserved capacity of the target Virtual Disk. The attribute.value.u32[2] field contains the redundancy type of the internal Logical Disk. The attribute.value.u32[3] field contains the noid of the associated successor internal Logical Disk. The attribute.type field contains the value 6. The values that may be found in the attribute.value.u32[2] field are as follows: <UL><LI>1 = Vraid0 <LI>2 = Vraid1 <LI>3 = Vraid5 </UL>"
	::= 13602377


sCellEventTrap_9_65 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Host Operating System mode of the Storage System Host identified in the handle field has changed. The old_attr.type and new_attr.type fields contain the value 1. The old_attr.value.u32[0] field contains the old Host Operating System mode. The new_attr.value.u32[0] field contains the new Host Operating System mode. The values that may be found in the old_attr.value.u32[0] and new_attr.value.u32[0] fields are as follows: <UL><LI>0 = Unknown <LI>1 = User defined <LI>2 = Unused <LI>3 = WINNT with SecurePath <LI>4 = VMS <LI>5 = TRU64 UNIX <LI>6 = Sun UNIX <LI>7 = NetWare <LI>8 = HP <LI>9 = IBM <LI>10 = LINUX <LI>11 = SCO UNIX </UL>"
	::= 13602405


sCellEventTrap_9_66 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. Time was set on the Storage System identified in the handle field."
	::= 13602406


sCellEventTrap_9_67 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The LUN of the Presented Unit identified in the handle field has changed. The old_attr.type field and the new_attr.type fields contain the value 1. The old_attr.value.u32[0..1] fields contain the value of the old LUN. The new_attr.value.u32[0..1] fields contain the value of the new LUN. The secondary_id field contains the noid portion of the handle for the Storage System Virtual Disk associated with the Presented Unit. This Presented Unit is associated with the Virtual Disk identified in the add_handle field."
	::= 13602407


sCellEventTrap_9_68 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Device Addition Policy of the Storage System identified in the handle field has changed. The old_attr.type field and the new_attr.type fields contain the value 1. The old_attr.value.u32[0] field contains the old Device Addition Policy. The new_attr.value.u32[0] field contains the new Device Addition Policy. The policy values that may be found in the old_attr.value.u32[0] and new_attr.value.u32[0] fields are as follows: <UL><LI>1 = Manual policy <LI>2 = Automatic policy </UL>"
	::= 13602408


sCellEventTrap_9_69 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Quiescent state of the Storage System Virtual Disk identified in the handle field has changed. The old_attr.type field and the new_attr.type fields contain the value 1. The old_attr.value.u32[0] field contains the old Quiescent state. The new_attr.value.u32[0] field contains the new Quiescent state. The state values that may be found in the old_attr.value.u32[0] and new_attr.value.u32[0] fields are as follows: <UL><LI>0 = Not quiescent <LI>1 = Quiescent </UL>This Storage System Virtual Disk is associated with the Virtual Disk identified in the add_handle field."
	::= 13602409


sCellEventTrap_9_6a TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Enabled/Disabled state of the Storage System Virtual Disk identified in the handle field has changed. The old_attr.type field and the new_attr.type fields contain the value 1. The old_attr.value.u32[0] field contains the old Enabled/Disabled state. The new_attr.value.u32[0] field contains the new Enabled/Disabled state. The state values that may be found in the old_attr.value.u32[0] and new_attr.value.u32[0] fields are as follows: <UL><LI>1 = Disabled <LI>2 = Enabled </UL>This Storage System Virtual Disk is associated with the Virtual Disk identified in the add_handle field."
	::= 13602410


sCellEventTrap_9_6b TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Cache Policy of the Storage System Virtual Disk identified in the handle field has changed. <P> The old_attr.type field and the new_attr.type fields contain the value 1. The old_attr.value.u32[0] field contains the old Write Cache Policy. The new_attr.value.u32[0] field contains the new Write Cache Policy. The policy values that may be found in the old_attr.value.u32[0] and new_attr.value.u32[0] fields are as follows: <UL><LI>1 = Writethrough <LI>2 = Writeback </UL><P> The old_attr.value.u32[1] field contains the old Read Cache Policy. The new_attr.value.u32[1] field contains the new Read Cache Policy. The policy values that may be found in the old_attr.value.u32[1] and new_attr.value.u32[1] fields are as follows: <UL><LI>1 = Read cache on <LI>2 = Read cache off </UL><P> The old_attr.value.u32[2] field contains the old Cache Mirroring Policy. The new_attr.value.u32[2] field contains the new Cache Mirroring Policy. The policy values that may be found in the old_attr.value.u32[2] and new_attr.value.u32[2] fields are as follows: <UL><LI>1 = Mirror <LI>2 = No mirror </UL>This Storage System Virtual Disk is associated with the Virtual Disk identified in the add_handle field."
	::= 13602411


sCellEventTrap_9_6c TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Usage state of a Volume changed. The affected Volume is identified in the handle field. The old_attr.value.u32[0] field contains the old Usage state. The new_attr.value.u32[0] field contains the new Usage state. The Usage state values that may be found in the old_attr.value.u32[0] and new_attr.value.u32[0] fields are as follows: <UL><LI>1 = Disk Group <LI>2 = Reserved <LI>4 - 20 = temporary usage reserved for drive code load </UL>This Volume is associated with the Disk Group identified in the add_handle field, if either the old Usage state or the new Usage state is 1. The secondary_id field contains the internal identification of that Volume's Redundant Storage Set."
	::= 13602412


sCellEventTrap_9_6d TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Disk Failure Protection Level of the Disk Group identified in the handle field has changed. The old_attr.type and new_attr.type fields contain the value 1. The old_attr.value.u32[0] field contains the old number of physical disk drives available for use. The new_attr.value.u32[0] field contains the new number of physical disk drives available for use."
	::= 13602413


sCellEventTrap_9_6e TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Write Protected state of the Derived Unit identified in the handle field has changed. This Derived Unit is associated with the Virtual Disk identified in the add_handle field. The secondary_id field contains the noid portion of the handle for the Storage System Virtual Disk associated with the Derived Unit. The old_attr.type field and the new_attr.type fields contain the value 1. The old_attr.value.u32[0] field contains the old Write Protected state. The new_attr.value.u32[0] field contains the new Write Protected state. The Write Protected state values that may be found in the old_attr.value.u32[0] and new_attr.value.u32[0] fields are as follows: <UL><LI>0 = Write protect off <LI>1 = Write protect on </UL>This Derived Unit is associated with the Virtual Disk identified in the add_handle field."
	::= 13602414


sCellEventTrap_9_70 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. The Physical Disk Drive identified in the handle field has experienced numerous communication failures on a particular Fibre Channel port identified in the new_attr.value.str field. The old_attr.value.u32[0] field contains the internal port ID. The enclosure number, bay number, and rack number where the Physical Disk Drive is located are contained in the old_attr.value.u32[1], old_attr.value.u32[2], old_attr.value.u32[3] fields, respectively. The old_attr.type field contains value 1. The new_attr.value.str field contains the cerp_id of the Fibre Channel port. The new_attr.type field contains value 4."
	::= 13602416


sCellEventTrap_9_71 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller identified in the handle field received a request to shutdown. <P> The old_attr.type field and field contain the value 1. The old_attr.value.u32[0] field indicates the type of restart that was requested as follows: <UL><LI>0 = None -- no restart <LI>1 = Regular -- full restart, host system connectivity is lost until the controller returns to normal operation <LI>2 = Fast -- resynchronization, restart of the controller in a manner that has little or no impact on host system connectivity </UL><P> The old_attr.value.u32[1] field indicates whether the other HSV110 controller of the pair was requested to remain operational or to also shutdown as follows: <UL><LI>0 = Remain operational <LI>1 = Coupled shutdown </UL><P> The old_attr.value.u32[2] field indicates whether the HSV110 controller was requested to remain in the power on state or power itself off as follows: <UL><LI>0 = Remain in the power on state <LI>1 = Power itself off </UL><P> The old_attr.value.u32[3] field value indicates whether the Physical Disk Drive enclosure(s) was requested to remain in the power on state or to be powered off as follows: <UL><LI>0 = Remain in the power on state <LI>1 = Powered off </UL><P> The old_attr.value.u32[4] field value indicates whether the battery assemblies located within the HSV110 controller were requested to be enabled or disabled as follows: <UL><LI>0 = Enabled <LI>1 = Disabled </UL><P> The old_attr.value.u32[5] field contains the number of seconds the shutdown operation was requested to be delayed."
	::= 13602417


sCellEventTrap_9_72 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller identified in the handle field has completed its shutdown preparations. <P> The old_attr.type field contain the value 1. The old_attr.value.u32[0] field value indicates the result of the HSV110 controller Cache Memory shutdown operation as follows: <UL><LI>1 = Success <LI>2 = Failure <LI>3 = Not applicable </UL><P> The old_attr.value.u32[1] field contains the internal Storage System Management Interface cache shutdown status code. <P> The old_attr.value.u32[2] field value indicates the result of the Physical Disk Drive enclosure(s) power off operation as follows: <UL><LI>1 = Success <LI>2 = Failure <LI>3 = Not applicable </UL><P> The old_attr.value.u32[3] field contains the internal Storage System Management Interface Physical Disk Drive enclosure(s) power off status code. <P> The old_attr.value.u32[4] field value indicates the result of the battery assemblies disable operation as follows: <UL><LI>1 = Success <LI>2 = Failure <LI>3 = Not applicable </UL><P> The old_attr.value.u32[5] field value indicates the battery assemblies disable operation failure mode as follows: <UL><LI>0 = No failure indicated. <LI>1 = Failed only on the HSV110 controller identified in the handle field. <LI>2 = Failed only on the other HSV110 controller of the pair. <LI>3 = Failed on both HSV110 controllers. </UL>"
	::= 13602418


sCellEventTrap_9_73 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Failsafe state of the Data Replication Group identified in the handle field has changed. The old_attr.value.u32[0] field contains the old Failsafe state. The new_attr.value.u32[0] field contains the new Failsafe state. The Failsafe state values that may be found in the old_attr.value.u32[0] and new_attr.value.u32[0] fields are as follows: <UL><LI>1 = Failsafe Disabled <LI>2 = Failsafe Enabled </UL>"
	::= 13602419


sCellEventTrap_9_74 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Mode of the Data Replication Group identified in the handle field has changed. The old_attr.value.u32[0] field contains the old Mode. The new_attr.value.u32[0] field contains the new Mode. The Mode values that may be found in the old_attr.value.u32[0] and new_attr.value.u32[0] fields are as follows: <UL><LI>0 = Normal Active Source <LI>1 = Normal Active Destination <LI>2 = Active/Active (Master) <LI>3 = Active/Active (Non-Master) </UL>"
	::= 13602420


sCellEventTrap_9_75 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Operational state of a Data Replication Group has changed to Synchronous or Asynchronous. The old_attr.value.u32[0] field contains the old Operation state. The new_attr.value.u32[0] field contains the new Operation state. The Operation state values that may be found in the old_attr.value.u32[0] and new_attr.value.u32[0] fields are as follows: <UL><LI>1 = Synchronous <LI>2 = Asynchronous </UL>"
	::= 13602421


sCellEventTrap_9_76 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Read Only attribute of the Data Replication Group identified in the handle field has changed. The old_attr.value.u32[0] field contains the old Read Only attribute. The new_attr.value.u32[0] field contains the new Read Only attribute. The Read Only attribute values that may be found in the old_attr.value.u32[0] and new_attr.value.u32[0] fields are as follows: <UL><LI>0 = Data Replication Destination Storage System Virtual Disk disabled for read access. <LI>1 = Data Replication Destination Storage System Virtual Disk enabled for read access. </UL>"
	::= 13602422


sCellEventTrap_9_77 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A Data Replication Group failover has occurred. The handle field contains the identity of the Data Replication Group. The old_attr.value.u32[0] field contains the old Role. The new_attr.value.u32[0] field contains the new Role. <UL><LI>0 = Normal Active Source <LI>1 = Normal Active Destination <LI>2 = Active/Active (Master) <LI>3 = Active/Active (Non-Master) </UL>"
	::= 13602423


sCellEventTrap_9_78 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A Data Replication Group has been suspended or resumed. The handle field contains the identity of the Data Replication Group. The old_attr.value.u32[0] field contains the old Suspend state. The new_attr.value.u32[0] field contains the new Suspend state. The Suspend state values that may be found in the old_attr.value.u32[0] and new_attr.value.u32[0] fields are as follows: <UL><LI>1 = Connection between the Data Replication Source and Data Replication Destination is active. <LI>2 = Connection between the Data Replication Source and Data Replication Destination is inactive. </UL>"
	::= 13602424


sCellEventTrap_9_79 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A Storage System Virtual Disk was added to a Data Replication Group. The Storage System Virtual Disk is identified in the add_handle field. The Data Replication Group is identified in the handle field."
	::= 13602425


sCellEventTrap_9_7a TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A Storage System Virtual Disk was removed from a Data Replication Group. The Storage System Virtual Disk is identified in the add_handle field. The Data Replication Group is identified in the handle field."
	::= 13602426


sCellEventTrap_9_c8 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Undetermined -- more information needed to determine severity. The Data Availability state of the internal Logical Disk associated with the Virtual Disk identified in the handle field has transitioned to the DATA LOST state. The value.ul1 field contains the new state: 1 (DATA LOST). The value.ul2 field contains the old state: 0 (NORMAL)."
	::= 13602504


sCellEventTrap_9_c9 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Undetermined -- more information needed to determine severity. The state of the Disk Group identified in the handle field has transitioned to an INOPERATIVE state. The value.ul1 field contains the new Disk Group state. The value.ul2 field contains the old Disk Group state. The state values that may be found in the value.ul1 and value.ul2 fields are as follows: <UL><LI>1 = Normal <LI>2 = Disk Group with no redundancy is inoperative <LI>3 = Disk Group with parity redundancy is inoperative <LI>4 = Disk Group with mirrored redundancy is inoperative <LI>5 = Disk Group with no redundancy is inoperative, marked for re-use <LI>6 = Disk Group with parity redundancy is inoperative, marked for re-use <LI>7 = Disk Group with mirrored redundancy is inoperative, marked for re-use </UL>"
	::= 13602505


sCellEventTrap_9_ca TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Undetermined -- more information needed to determine severity. The state of the internal Logical Disk associated with the Virtual Disk identified in the handle field has transitioned to the FAILED state. The value.ul1 field contains the new state: 5 (FAILED). The value.ul2 field contains the old state. The state values that may be found in the value.ul2 field are as follows: <UL><LI>1 = Normal <LI>2 = Replacement delay in progress <LI>3 = Redundancy lost, restore in progress <LI>4 = Redundancy lost, restore stalled <LI>6 = Creation in progress <LI>7 = Snapshot is inoperative due to lack of snapshot space <LI>8 = Deletion in progress <LI>9 = Capacity change in progress <LI>10 = Inoperative due to data lost <LI>11 = Capacity reservation in progress <LI>12 = Capacity unreservation in progress </UL>"
	::= 13602506


sCellEventTrap_9_cb TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. The state of the internal Logical Disk associated with the Virtual Disk identified in the handle field has transitioned to the SNAPSHOT OVERCOMMIT state. The value.ul1 field contains the new state: 7 (SNAPSHOT OVERCOMMIT). The value.ul2 field contains the old state. The state values that may be found in the value.ul2 field are as follows: <UL><LI>1 = Normal <LI>2 = Replacement delay in progress <LI>3 = Redundancy lost, restore in progress <LI>4 = Redundancy lost, restore stalled <LI>5 = Failed <LI>6 = Creation in progress <LI>8 = Deletion in progress <LI>9 = Capacity change in progress <LI>10 = Inoperative due to device data lost <LI>11 = Capacity reservation in progress <LI>12 = Capacity unreservation in progress </UL>"
	::= 13602507


sCellEventTrap_9_cc TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Undetermined -- more information needed to determine severity. The state of the internal Logical Disk associated with the Virtual Disk identified in the handle field has transitioned to the DEVICE DATA LOST state. The value.ul1 field contains the new state: 10 (DEVICE DATA LOST). The value.ul2 field contains the old state. The state values that may be found in the value.ul2 field are as follows: <UL><LI>1 = Normal <LI>2 = Replacement delay in progress <LI>3 = Redundancy lost restore, in progress <LI>4 = Redundancy lost restore, stalled <LI>5 = Failed <LI>6 = Creation in progress <LI>7 = Snapshot is inoperative due to lack of snapshot space <LI>8 = Deletion in progress <LI>9 = Capacity change in progress <LI>11 = Capacity reservation in progress <LI>12 = Capacity unreservation in progress </UL>"
	::= 13602508


sCellEventTrap_9_cd TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Undetermined -- more information needed to determine severity. The state of the Fibre Channel port identified in the attribute.value.str field and located on the rear panel of the HSV110 controller identified in the handle field has transitioned to the FAILED state. The attribute.type field contains the value 4. The value.ul1 field contains the new state: 2 (FAILED). The value.ul2 field contains the old state: 1 (NORMAL). <P> Note that the HSV110 controller's internal identity of the affected Fibre Channel port is contained in the secondary_id field."
	::= 13602509


sCellEventTrap_9_ce TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The state of the Disk Group identified in the handle field has transitioned to an INOPERATIVE MARKED state. The value.ul1 field contains the new Disk Group state. The value.ul2 field contains the old Disk Group state. The state values that may be found in the value.ul1 and value.ul2 fields are as follows: <UL><LI>1 = Normal <LI>2 = Disk Group with no redundancy is inoperative <LI>3 = Disk Group with parity redundancy is inoperative <LI>4 = Disk Group with mirrored redundancy is inoperative <LI>5 = Disk Group with no redundancy is inoperative, marked for re-use <LI>6 = Disk Group with parity redundancy is inoperative, marked for re-use <LI>7 = Disk Group with mirrored redundancy is inoperative, marked for re-use </UL>"
	::= 13602510


sCellEventTrap_9_cf TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. The state of the Physical Disk Drive identified in the handle field has transitioned to the NOT PRESENT state. The value.ul1 field contains the new state: 4 (NOT PRESENT). The value.ul2 field contains the old state. The state values that may be in the value.ul2 field are as follows: <UL><LI>1 = Normal <LI>2 = Degraded <LI>3 = Failed <LI>5 = Single Port on Fibre </UL>The enclosure number, bay number, and rack number where the Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], attribute.value.u32[2] fields, respectively. The attribute.type field contains value 1. The rack number in the attribute.value.u32[2] field will not contain a valid value until a future release."
	::= 13602511


sCellEventTrap_9_d0 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller identified in the handle field no longer needs attention."
	::= 13602512


sCellEventTrap_9_d1 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Undetermined -- more information needed to determine severity. The HSV110 controller identified in the handle field needs attention."
	::= 13602513


sCellEventTrap_9_d2 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. The Blower Present flag for the '1' blower assembly located within the HSV110 controller identified in the handle field has transitioned from the PRESENT to NOT PRESENT state indicating that the blower has been removed. The secondary_id field contains the '1' blower assembly internal identifier value: 1. The value.ul1 field contains the new state of the Blower Present flag: 0 (NOT PRESENT). The value.ul2 field contains the old state of the Blower Present flag: 1 (PRESENT)."
	::= 13602514


sCellEventTrap_9_d3 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Undetermined -- more information needed to determine severity. At least one Virtual Disk associated with the Data Replication Group identified in the handle field has transitioned to the INOPERATIVE state. The remaining Virtual Disks associated with this Data Replication Group have been forced INOPERATIVE. The value.ul1 field contains the new Data Replication Group member state: 2 (INOPERATIVE). The value.ul2 field contains the old Data Replication Group member state: 1 (OPERATIVE)."
	::= 13602515


sCellEventTrap_9_d4 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. All the Virtual Disks associated with the Data Replication Group identified in the handle field have transitioned to the OPERATIVE state. The value.ul1 field contains the new Data Replication Group member state: 1 (OPERATIVE). The value.ul2 field contains the old Data Replication Group member state: 2 (INOPERATIVE)."
	::= 13602516


sCellEventTrap_9_d5 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The state of the Physical Disk Drive identified in the handle field has transitioned to the Single Port on Fibre state. The value.ul1 field contains the new state: 5 (SINGLE PORT ON FIBRE). The value.ul2 field contains the old state. The state values that may be in the value.ul2 field are as follows: <UL><LI>1 = Normal <LI>2 = Degraded <LI>3 = Failed <LI>4 = Not Present </UL>The enclosure number, bay number, and rack number where the Physical Disk Drive is located are contained in the attribute.value.u32[0], attribute.value.u32[1], attribute.value.u32[2] fields, respectively. The attribute.type field contains value 1. The rack number in the attribute.value.u32[2] field will not contain a valid value until a future release."
	::= 13602517


sCellEventTrap_9_d6 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller identified in the handle field has been shutdown because the temperature sensors do not agree and the system temperature can not be accurately determined. The value.ul1 field contains the current temperature reported in celsius from I2C sensor 1, while the value.ul2 field contains the reading from I2C sensor 2."
	::= 13602518


sCellEventTrap_9_d7 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller identified in the handle field has been shutdown because the temperature sensors can not be accessed and the system temperature can not be accurately determined. The value.ul1 field contains the status from the attempted I2C access."
	::= 13602519


sCellEventTrap_b_0 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The HSV110 controller identified by the node_name field has begun a resynchronization operation (i.e., a restart of the controllers in a manner that has little or no impact on host system connectivity). The information.pc field contains the program counter of resynchronization operation initiator. The information.flags field contains reboot flags value. The information.code field contains the resynchronization operation event code value."
	::= 13602816


sCellEventTrap_c_0 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The specified Destination Virtual Disk has successfully completed a Full Copy. The following fields are not valid: status, blocks, vda."
	::= 13603072


sCellEventTrap_c_1 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. The specified Source Virtual Disk has transitioned to the Logging state because the alternate Storage System is not accessible or the Data Replication Group is suspended. The following fields are not valid: status, blocks, vda, port, cerp_id, side."
	::= 13603073


sCellEventTrap_c_2 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. The specified Source Virtual Disk has transitioned to the Logging state because the Destination Virtual Disk is not accessible. The following fields are not valid: status, blocks, vda, port, cerp_id, side."
	::= 13603074


sCellEventTrap_c_3 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The specified Destination Virtual Disk has transitioned to the Merging state, because the alternate Storage System or Destination Virtual Disk is now accessible or resumed. The following fields are not valid: status, blocks, vda."
	::= 13603075


sCellEventTrap_c_4 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A Data Replication Group has entered the Failsafe Locked state due to an inaccessible or inoperative destination. Either the Destination Virtual Disk is not accessible or a Virtual Disk in the Data Replication Group is inoperative. The following fields are not valid: status, blocks, vda, port, cerp_id, side."
	::= 13603076


sCellEventTrap_c_5 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A Data Replication Group has entered the Failsafe Locked state due to an inoperative source. Either the Source Virtual Disk is not accessible or a Virtual Disk in the Data Replication Group is inoperative. The following fields are not valid: status, blocks, vda, port, cerp_id, side."
	::= 13603077


sCellEventTrap_c_6 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. An unrecoverable read error occurred on the specified Source Virtual Disk during the Full Copy. The Virtual Disk address specified in the vda field indicates the first block in error. The Full Copy was terminated."
	::= 13603078


sCellEventTrap_c_7 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A Full Copy terminated prior to completion. A remote copy error occurred due to an inaccessible alternate Storage System. The Virtual Disk address specified in the vda field indicates the first block in error. The Full Copy will continue when the Data Replication Destination is restored."
	::= 13603079


sCellEventTrap_c_8 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A Full Copy terminated prior to completion. A remote copy error occurred due to an inaccessible Destination Virtual Disk. The Virtual Disk address specified in the vda field indicates the first block in error. The Full Copy will continue when the Data Replication Destination is restored."
	::= 13603080


sCellEventTrap_c_9 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. A Data Replication Log has been reset due to insufficient Disk Group capacity. The Data Replication Destination has been marked for a Full Copy. The following fields are not valid: status, blocks, vda, port, cerp_id, side."
	::= 13603081


sCellEventTrap_c_a TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A Data Replication Log has been reset due to a Data Replication Group failover. The following fields are not valid: status, blocks, vda."
	::= 13603082


sCellEventTrap_c_c TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A Destination Data Replication Group has successfully completed a Merge. The following fields are not valid: status, blocks, vda."
	::= 13603084


sCellEventTrap_c_f TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A Data Replication Group is no longer in a Failsafe Locked state. The following fields are not valid: status, blocks, vda, port, cerp_id, side."
	::= 13603087


sCellEventTrap_c_10 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A Destination Data Replication Group has been marked for a Full Copy. The following fields are not valid: status, blocks, vda."
	::= 13603088


sCellEventTrap_c_11 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. A Storage System has discovered that a Data Replication Group failover has taken place. This Virtual Disk is transitioning from a Data Replication Source role to a Data Replication Destination role. The following fields are not valid: status, blocks, vda."
	::= 13603089


sCellEventTrap_c_12 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. This Data Replication Group is transitioning from a Data Replication Destination role to a Data Replication Source role. The following fields are not valid: status, blocks, vda."
	::= 13603090


sCellEventTrap_c_15 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The Data Replication Path between this Site and the Alternate Site has closed, possibly due to a connection failure between the specified host port and the Alternate Site. The following fields are not valid: group_name_uuid, group_uuid, source_scvd_uuid, status, block, vda."
	::= 13603093


sCellEventTrap_d_0 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. Unrecognized event reported by a Drive Enclosure Environmental Monitoring Unit. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. The event was reported by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The content of the alarm_error_code field could not be translated into a known event. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603328


sCellEventTrap_d_1 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A physical disk drive that is not Fibre Channel compatible or cannot operate at the link rate established by the drive enclosure I/O modules was detected. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. This problem was detected during spin up of the physical disk drive installed in the drive enclosure bay identified in the alarm_error_code.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603329


sCellEventTrap_d_2 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. A physical disk drive is improperly installed or missing. This could affect the drive enclosure air flow and cause an over temperature condition. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The affected drive enclosure bay is identified in the alarm_error_code.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603330


sCellEventTrap_d_3 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. A physical disk drive was removed while software-activated drive locking was enabled on a drive enclosure that does not support drive locking. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The affected drive enclosure bay is identified in the alarm_error_code.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603331


sCellEventTrap_d_4 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A physical disk drive that is capable of operating at the loop link rate established by the drive enclosure I/O module was found to be running at a different rate. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The affected physical disk drive is installed in the drive enclosure bay identified in the alarm_error_code.field.en field. The Fibre Channel loop on which the problem was detected is identified by the content of the alarm_error_code.field.ec field as follows: <UL><LI>4 = loop A <LI>5 = loop B </UL><P> The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603332


sCellEventTrap_d_33 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. The AC input to a drive enclosure power supply has been lost. This makes the remaining power supply a single point of failure. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The location of the affected power supply (1 or 2) is identified in the alarm_error_code.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603379


sCellEventTrap_d_34 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A drive enclosure power supply is improperly installed or missing. This could affect the drive enclosure air flow and cause an over temperature condition. The operational power supply will automatically shut down after a short period of time, thereby disabling the drive enclosure. This condition remains active until either the problem is corrected, or the operational power supply shuts down, whichever occurs first. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The location of the affected power supply (1 or 2) is identified in the alarm_error_code.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603380


sCellEventTrap_d_35 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A drive enclosure power supply component has failed. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The location of the affected power supply (1 or 2) is identified in the alarm_error_code.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603381


sCellEventTrap_d_47 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A drive enclosure blower is not operating properly. This could affect the drive enclosure air flow and cause an over temperature condition. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The location of the affected blower (1 or 2) is identified in the alarm_error_code.field.en field. The cause of the improper operation is described by the content of the alarm_error_code.field.ec field as follows: <UL><LI>1 = The blower is operating at a speed that is outside of the Drive Enclosure Environmental Monitoring Unit specified range, possibly because of a bearing problem. <LI>2 = The blower is operating at a speed that is significantly outside of the Drive Enclosure Environmental Monitoring Unit specified range, possibly because of a bearing problem. <LI>3 = The blower has stopped. NOTE: The other blower (if operational) now operates at high speed and is a single point of failure. A single blower operating at high speed can provide sufficient air flow to cool an enclosure and the elements for up to 100 hours. However, operating an enclosure at temperatures approaching an overheating threshold can damage elements and may reduce the MTBF of a specific element. Hewlett-Packard therefore recommends immediate replacement of the defective blower. <LI>4 = The power supply reported an internal blower error. </UL><P> The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603399


sCellEventTrap_d_4b TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A drive enclosure blower is improperly installed or missing. This affects the drive enclosure air flow and can cause an over temperature condition. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The location of the affected blower (1 or 2) is identified in the alarm_error_code.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603403


sCellEventTrap_d_4c TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. Both drive enclosure blowers are missing. This severely affects the drive enclosure air flow and can cause an over temperature condition. The operational power supply(s) will automatically shut down after a short period of time, thereby disabling the drive enclosure. This condition remains active until either the problem is corrected, or the operational power supply(s) shut down, whichever occurs first. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. Note that this event is preceded by a 'drive enclosure blower is improperly installed or missing' event that identifies the location of the first missing blower. The location of the second missing blower (1 or 2) is identified in the alarm_error_code.field.en field of this event. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603404


sCellEventTrap_d_5b TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. A drive enclosure temperature sensor out of range condition has been reported by one of the drive enclosure elements. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The location of the temperature sensor (1 through 11) is identified in the alarm_error_code.field.en field as follows: <UL><LI>1 = Power Supply 1 Exhaust <LI>2 = Power Supply 2 Exhaust <LI>3 = Drive Enclosure Environmental Monitoring Unit <LI>4 = Drive Bay 1 <LI>5 = Drive Bay 2 <LI>6 = Drive Bay 3 <LI>7 = Drive Bay 4 <LI>8 = Drive Bay 5 <LI>9 = Drive Bay 6 <LI>A = Drive Bay 7 <LI>B = Drive Bay 8 <LI>C = Drive Bay 9 <LI>D = Drive Bay 10 <LI>E = Drive Bay 11 <LI>F = Drive Bay 12 <LI>10 = Drive Bay 13 <LI>11 = Drive Bay 14 </UL><P> The temperature sensor out of range condition is described by the content of the alarm_error_code.field.ec field as follows: <UL><LI>1 = The element temperature is approaching, but has not reached, the high temperature CRITICAL threshold. Continued operation under these conditions may result in a CRITICAL condition and may reduce an element's MTBF. <LI>2 = The element temperature is above the high temperature CRITICAL threshold. Continued operation under these conditions may result in element failure. <LI>3 = The element temperature is approaching, but has not reached, the low temperature CRITICAL threshold. Continued operation under these conditions may result in a CRITICAL condition and may reduce an element's MTBF. <LI>4 = The element temperature has reached the low temperature CRITICAL threshold. Continued operation under these conditions may result in element failure. </UL><P> The actual temperature threshold values can be found in the HSV element manager GUI. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603419


sCellEventTrap_d_5f TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. The average temperature of two of the three temperature sensor groups (i.e., Drive Enclosure Environmental Monitoring Unit, Disk Drives, and Power Supplies) exceeds the CRITICAL level. The operational power supply(s) will automatically shut down after a short period of time, thereby disabling the drive enclosure. This condition remains active until either the problem is corrected, or the operational power supply(s) shut down, whichever occurs first. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. Note that in this case the content of the alarm_error_code.field.en field is undefined. <P> The actual temperature threshold values can be found in the HSV element manager GUI. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603423


sCellEventTrap_d_6f TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. An internal Drive Enclosure Environmental Monitoring Unit error has occurred. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The alarm_error_code.field.en field contains the value 1 signifying that the Drive Enclosure Environmental Monitoring Unit is the affected element. The cause of the improper operation is described by the content of the alarm_error_code.field.ec field as follows: <UL><LI>1 = An internal Drive Enclosure Environmental Monitoring Unit clock error has occurred. <LI>2 = The Inter-IC (I2C) bus is not processing data and the Drive Enclosure Environmental Monitoring Unit is unable to monitor or report the status of the elements or enclosures. <LI>5 = A Backplane NVRAM error has occurred. </UL><P> The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603439


sCellEventTrap_d_71 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. An internal Drive Enclosure Environmental Monitoring Unit error has occurred. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The alarm_error_code.field.en field contains the value 1 signifying that the Drive Enclosure Environmental Monitoring Unit is the affected element. The cause of the improper operation is described by the content of the alarm_error_code.field.ec field as follows: <UL><LI>3 = A drive enclosure power supply was shut down. <LI>16 = The Drive Enclosure Environmental Monitoring Unit ESI data has been corrupted. </UL><P> The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603441


sCellEventTrap_d_72 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. A Drive Enclosure Environmental Monitoring Unit is unable to collect data for the SCSI-3 Enclosure Services (SES) page. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The alarm_error_code.field.en field contains the value 1 signifying that the Drive Enclosure Environmental Monitoring Unit is the affected element. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603442


sCellEventTrap_d_7e TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. Invalid data was read from a Drive Enclosure Environmental Monitoring Unit NVRAM. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The alarm_error_code.field.en field contains the value 1 signifying that the Drive Enclosure Environmental Monitoring Unit is the affected element. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603454


sCellEventTrap_d_7f TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. An internal Drive Enclosure Environmental Monitoring Unit error has occurred. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The alarm_error_code.field.en field contains the value 1 signifying that the Drive Enclosure Environmental Monitoring Unit is the affected element. The cause of the improper operation is described by the content of the alarm_error_code.field.ec field as follows: <UL><LI>11 = The Drive Enclosure Environmental Monitoring Unit cannot write data to the NVRAM. <LI>12 = The Drive Enclosure Environmental Monitoring Unit cannot read data from the NVRAM. <LI>13 = The Field Programmable Gate Array (FPGA) that controls the ESI bus failed to load information required for Drive Enclosure Environmental Monitoring Unit operation. </UL><P> The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603455


sCellEventTrap_d_82 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. A drive enclosure's address is incorrect or the enclosure has no address. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The alarm_error_code.field.en field contains the value 1 signifying that the Drive Enclosure Environmental Monitoring Unit is the affected element. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603458


sCellEventTrap_d_83 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit has experienced a hardware failure. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The alarm_error_code.field.en field contains the value 1 signifying that the Drive Enclosure Environmental Monitoring Unit is the affected element. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release. The cause of the improper operation is described by the content of the alarm_error_code.field.ec field as follows: <UL><LI>15 = Drive Enclosure Environmental Monitoring Unit hardware failure DP. <LI>18 = Drive Enclosure Environmental Monitoring Unit hardware failed BT. <LI>19 = Drive Enclosure Environmental Monitoring Unit ESI driver failure. </UL>"
	::= 13603459


sCellEventTrap_d_85 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. A drive enclosure power supply failed to respond to a shut down command. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The alarm_error_code.field.en field contains the value 1 signifying that the Drive Enclosure Environmental Monitoring Unit is the affected element. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603461


sCellEventTrap_d_8d TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A drive enclosure transceiver error has been detected. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The location of the transceiver (1 through 4) is identified in the alarm_error_code.field.en field as follows: <UL><LI>1 = Transceiver 01 <LI>2 = Transceiver 02 <LI>3 = Transceiver 03 <LI>4 = Transceiver 04 </UL><P> The transceiver error condition is described by the content of the alarm_error_code.field.ec field as follows: <UL><LI>1 = The transceivers on this link are not the same type or they are incompatible with the drive enclosure I/O module. This error prevents the controller from establishing a link with the enclosure drives and eliminates the enclosure dual-loop capability. <LI>2 = The transceiver can no longer detect a data signal. This error prevents the controller from transferring data on a loop and eliminates the enclosure dual-loop capability. <LI>3 = The system has detected an FC-AL bus fault involving a transceiver. This error prevents the controller from transferring data on a loop and eliminates the enclosure dual-loop capability. <LI>4 = The transceiver that was previously in this location has been removed. <LI>5 = The transceiver in the specified location has detected invalid Fibre Channel characters. </UL><P> The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603469


sCellEventTrap_d_a1 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A drive enclosure power supply voltage sensor out of range condition has been reported. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The location of the voltage sensor (1 through 4) is identified in the alarm_error_code.field.en field as follows: <UL><LI>1 = Power Supply 1 +5 VDC <LI>2 = Power Supply 1 +12 VDC <LI>3 = Power Supply 2 +5 VDC <LI>4 = Power Supply 2 +12 VDC </UL><P> The voltage sensor out of range condition is described by the content of the alarm_error_code.field.ec field as follows: <UL><LI>1 = The element voltage is approaching, but has not reached, the high voltage CRITICAL threshold. Continued operation under these conditions may result in a CRITICAL condition. <LI>2 = The element voltage is above the high voltage CRITICAL threshold. <LI>3 = The element voltage is approaching, but has not reached, the low voltage CRITICAL threshold. Continued operation under these conditions may result in a CRITICAL condition. <LI>4 = The element voltage has reached the low voltage CRITICAL threshold. </UL><P> The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603489


sCellEventTrap_d_b5 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A drive enclosure power supply current sensor out of range condition has been reported. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The location of the current sensor (1 through 4) is identified in the alarm_error_code.field.en field as follows: <UL><LI>1 = Power Supply 1 +5 VDC <LI>2 = Power Supply 1 +12 VDC <LI>3 = Power Supply 2 +5 VDC <LI>4 = Power Supply 2 +12 VDC </UL><P> The current sensor out of range condition is described by the content of the alarm_error_code.field.ec field as follows: <UL><LI>1 = The element current is approaching, but has not reached, the high current CRITICAL threshold. Continued operation under these conditions may result in a CRITICAL condition. <LI>2 = The element current is above the high current CRITICAL threshold. </UL><P> The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603509


sCellEventTrap_d_d8 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. A drive enclosure backplane invalid NVRAM read error has occurred. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit.This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The alarm_error_code.field.en field contains the value 1 signifying that the drive enclosure is the affected element. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603544


sCellEventTrap_d_d9 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A drive enclosure backplane error has occurred. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The alarm_error_code.field.en field contains the value 1 signifying that the drive enclosure is the affected element. The cause of the improper operation is described by the content of the alarm_error_code.field.ec field as follows: <UL><LI>11 = Unable to write data to the NVRAM. This problem prevents communication between elements in the enclosure. <LI>12 = Unable to read data from the NVRAM. This problem prevents communication between elements in the enclosure. <LI>13 = NVRAM has not been initialized properly. This is a manufacturing error. </UL><P> The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603545


sCellEventTrap_d_dd TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A drive enclosure I/O module error has occurred. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The location of the I/O module (A (01) and B (02)) is identified in the alarm_error_code.field.en field. The cause of the improper operation is described by the content of the alarm_error_code.field.ec field as follows: <UL><LI>1 = The I/O module's Fibre Channel link speed is not supported by the backplane. This error prevents the controller from establishing a link with enclosure drives and eliminates the enclosure dual-loop capability. <LI>11 = Unable to write data to the I/O module NVRAM. <LI>12 = Unable to read data from the I/O module NVRAM. <LI>13 = The I/O module that was in this location has been removed. </UL><P> The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603549


sCellEventTrap_d_de TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. A drive enclosure I/O module is unable to communicate with the Drive Enclosure Environmental Monitoring Unit. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The location of the I/O module (A (01) and B (02)) is identified in the alarm_error_code.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603550


sCellEventTrap_d_ec TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. A drive enclosure I/O module invalid NVRAM read error has occurred. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit.This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The location of the I/O module (A (01) or B (02)) is identified in the alarm_error_code.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603564


sCellEventTrap_d_f0 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. The status has changed on one or more of the drive enclosures. This is an informational event triggered by the occurrence of a change in the status of a drive enclosure. This event is generated for the HSV element manager GUI and contains no user information. The content of the handle, alarm_error_code field, dencl_num, and rack_num fields have no meaning for this event. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
	::= 13603568


sCellEventTrap_42_0 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. Indicated Host Fibre Channel port transitioned to link down."
	::= 13616896


sCellEventTrap_42_1 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. Indicated Host Fibre Channel port transitioned to link failed."
	::= 13616897


sCellEventTrap_42_3 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. An excessive number of link errors were detected on a HSV110 controller's Fibre Channel port. The identity of the affected Fibre Channel port is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number of the affected Fibre Channel port is contained in the port field. This is an informational event triggered by the occurrence of an excessive number of Tachyon chip link status errors detected within a particular link status error type. The number of occurrences of each link status error type is contained in a separate type-specific field (e.g., loss_of_signal, bad_rx_char, etc.). The HSV110 controller checks each of its Fibre Channel port's for excessive link status errors periodically."
	::= 13616899


sCellEventTrap_42_4 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. A Fibre Channel port on the HSV110 controller has failed to respond. The identity of the affected Fibre Channel port is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number of the affected Fibre Channel port is contained in the port field. The peb array contains the port event block information. The peq_frz_prod_index field contains the index to the port event block in use when the Tachyon chip entered the frozen state. The peq_prod_index field contains the index to the next port event block. The peq_cons_index field contains the index to the next port event block to be acted upon."
	::= 13616900


sCellEventTrap_42_5 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Normal -- informational in nature. Indicated Host Fibre Channel port transitioned to link wedged."
	::= 13616901


sCellEventTrap_83_0 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A failure was detected during the execution of this HSV110 controller's on board diagnostics."
	::= 13633536


sCellEventTrap_83_1 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Warning -- not failed but attention recommended or required. A GBIC SFF Serial ID Data check code failure was detected during the execution of this HSV110 controller's on board diagnostics."
	::= 13633537


sCellEventTrap_83_2 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A battery assembly failure was detected during the execution of this HSV110 controller's on board diagnostics."
	::= 13633538


sCellEventTrap_83_3 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A battery assembly failure was detected during the execution of this HSV110 controller's on board diagnostics."
	::= 13633539


sCellEventTrap_83_4 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A battery assembly communication failure was detected during the execution of this HSV110 controller's on board diagnostics."
	::= 13633540


sCellEventTrap_83_5 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A battery assembly communication failure was detected during the execution of this HSV110 controller's on board diagnostics."
	::= 13633541


sCellEventTrap_83_6 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { scellNameDateTime, scellSWComponent, scellECode, scellCAC, scellEIP }

	--#TYPE      "StorageCell Event"

	--#SUMMARY   "SCellNameTimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"

	--#STATE     WARNING
DESCRIPTION "Severity: Critical -- failure or failure imminent. A soft cache memory ECC error or indication of low battery voltage was detected during the execution of this HSV110 controller's on board diagnostics."
	::= 13633542


mngmtAgentTrap_1 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Object Already Exists"
	::= 136000001


mngmtAgentTrap_2 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Supplied Buffer Too Small"
	::= 136000002


mngmtAgentTrap_3 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Object Already Assigned"
	::= 136000003


mngmtAgentTrap_4 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Insufficient Available Data Storage"
	::= 136000004


mngmtAgentTrap_5 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Internal Error"
	::= 136000005


mngmtAgentTrap_6 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid status for logical disk"
	::= 136000006


mngmtAgentTrap_7 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid Class"
	::= 136000007


mngmtAgentTrap_8 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid Function"
	::= 136000008


mngmtAgentTrap_9 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid Logical Disk Block State"
	::= 136000009


mngmtAgentTrap_10 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid Loop Configuration"
	::= 136000010


mngmtAgentTrap_11 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid Parameter"
	::= 136000011


mngmtAgentTrap_12 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid Parameter handle"
	::= 136000012


mngmtAgentTrap_13 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid Parameter Id"
	::= 136000013


mngmtAgentTrap_14 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid Quorum Configuration"
	::= 136000014


mngmtAgentTrap_15 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid Target Handle"
	::= 136000015


mngmtAgentTrap_16 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid Target Id"
	::= 136000016


mngmtAgentTrap_17 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid Time"
	::= 136000017


mngmtAgentTrap_18 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Media is Inaccessible"
	::= 136000018


mngmtAgentTrap_19 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No Fibre Channel Port"
	::= 136000019


mngmtAgentTrap_20 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No Image"
	::= 136000020


mngmtAgentTrap_21 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No Permission"
	::= 136000021


mngmtAgentTrap_22 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system not initialized"
	::= 136000022


mngmtAgentTrap_23 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Not a Loop Port"
	::= 136000023


mngmtAgentTrap_24 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Not a Participating Controller"
	::= 136000024


mngmtAgentTrap_25 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Objects in your system are in use, and their state prevents the operation you wish to perform."
	::= 136000025


mngmtAgentTrap_26 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Parameter Object Does Not Exist"
	::= 136000026


mngmtAgentTrap_27 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Target Object Does Not Exist"
	::= 136000027


mngmtAgentTrap_28 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Timeout"
	::= 136000028


mngmtAgentTrap_29 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unknown Id"
	::= 136000029


mngmtAgentTrap_30 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unknown Parameter Handle"
	::= 136000030


mngmtAgentTrap_31 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MAJOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unrecoverable Media Error"
	::= 136000031


mngmtAgentTrap_32 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid State"
	::= 136000032


mngmtAgentTrap_33 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Transport Error"
	::= 136000033


mngmtAgentTrap_34 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Volume is Missing"
	::= 136000034


mngmtAgentTrap_35 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid Cursor"
	::= 136000035


mngmtAgentTrap_36 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid Target for the Operation"
	::= 136000036


mngmtAgentTrap_37 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No More Events"
	::= 136000037


mngmtAgentTrap_38 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Lock Busy"
	::= 136000038


mngmtAgentTrap_39 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Time Not Set"
	::= 136000039


mngmtAgentTrap_40 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Not a Supported Version"
	::= 136000040


mngmtAgentTrap_41 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No Logical Disk for Vdisk"
	::= 136000041


mngmtAgentTrap_42 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Logical disk Presented"
	::= 136000042


mngmtAgentTrap_43 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Operation Denied On Slave"
	::= 136000043


mngmtAgentTrap_44 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Not licensed for data replication"
	::= 136000044


mngmtAgentTrap_45 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Not DR group member"
	::= 136000045


mngmtAgentTrap_46 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid DR mode"
	::= 136000046


mngmtAgentTrap_47 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid DR State"
	::= 136000047


mngmtAgentTrap_48 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Security credentials needed. Please update your system's ID and password in the Storage System Access menu."
	::= 136000048


mngmtAgentTrap_49 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Security credentials supplied were invalid. Please update your system's ID and password in the Storage System Access menu."
	::= 136000049


mngmtAgentTrap_50 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Security credentials supplied were invalid. Please update your system's ID and password in the Storage System Access menu."
	::= 136000050


mngmtAgentTrap_51 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system connection down"
	::= 136000051


mngmtAgentTrap_52 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "DR group empty"
	::= 136000052


mngmtAgentTrap_53 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Incompatible attribute"
	::= 136000053


mngmtAgentTrap_54 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk is a DR group member"
	::= 136000054


mngmtAgentTrap_55 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk is a DR log unit"
	::= 136000055


mngmtAgentTrap_56 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Cache batteries failed or missing."
	::= 136000056


mngmtAgentTrap_57 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk is not presented"
	::= 136000057


mngmtAgentTrap_58 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Other controller failed"
	::= 136000058


mngmtAgentTrap_59 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Maximum Number of Objects Exceeded."
	::= 136000059


mngmtAgentTrap_60 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Max size"
	::= 136000060


mngmtAgentTrap_61 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Password mismatch. Please update your system's password in the Storage System Access menu. Continued attempts to access this storage system with an incorrect password will disable management of this storage system."
	::= 136000061


mngmtAgentTrap_62 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "DR group is merging"
	::= 136000062


mngmtAgentTrap_63 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "DR group is logging"
	::= 136000063


mngmtAgentTrap_64 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Connection is suspended"
	::= 136000064


mngmtAgentTrap_65 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Bad image header"
	::= 136000065


mngmtAgentTrap_66 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Bad image"
	::= 136000066


mngmtAgentTrap_67 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Image too large"
	::= 136000067


mngmtAgentTrap_68 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EMU not available"
	::= 136000068


mngmtAgentTrap_69 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EMU indefinite delay"
	::= 136000069


mngmtAgentTrap_70 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Image incompatible with system configuration. Version conflict in upgrade or downgrade not allowed."
	::= 136000070


mngmtAgentTrap_71 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Bad image segment"
	::= 136000071


mngmtAgentTrap_72 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Image already loaded"
	::= 136000072


mngmtAgentTrap_73 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Image Write Error"
	::= 136000073


mngmtAgentTrap_74 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Logical Disk Sharing"
	::= 136000074


mngmtAgentTrap_75 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Bad Image Size"
	::= 136000075


mngmtAgentTrap_76 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Image Load Busy"
	::= 136000076


mngmtAgentTrap_77 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Volume Failure Predicted"
	::= 136000077


mngmtAgentTrap_78 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Background allocation on the destination member is in progress. This action must complete before any others can be initiated ."
	::= 136000078


mngmtAgentTrap_79 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid Predecessor Vdisk Condition"
	::= 136000079


mngmtAgentTrap_80 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid Volume Usage"
	::= 136000080


mngmtAgentTrap_81 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Minimum Volumes In Disk Group"
	::= 136000081


mngmtAgentTrap_82 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Shutdown In Progress"
	::= 136000082


mngmtAgentTrap_83 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Not Ready"
	::= 136000083


mngmtAgentTrap_84 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Is Snapshot"
	::= 136000084


mngmtAgentTrap_85 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Cannot add or remove DR group member. Mirror cache must be active for this Vdisk. Check controller cache condition."
	::= 136000085


mngmtAgentTrap_86 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Inoperative"
	::= 136000086


mngmtAgentTrap_87 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Disk group inoperative or less than 8 disks in group"
	::= 136000087


mngmtAgentTrap_88 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system inoperative"
	::= 136000088


mngmtAgentTrap_89 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Failsafe Locked"
	::= 136000089


mngmtAgentTrap_90 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Data Flush Incomplete"
	::= 136000090


mngmtAgentTrap_91 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Redundancy Mirrored Inoperative"
	::= 136000091


mngmtAgentTrap_92 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Duplicate LUN"
	::= 136000092


mngmtAgentTrap_93 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Other remote controller failed"
	::= 136000093


mngmtAgentTrap_94 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unknown remote Vdisk"
	::= 136000094


mngmtAgentTrap_95 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unknown remote DR group"
	::= 136000095


mngmtAgentTrap_96 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "PLDMC failed"
	::= 136000096


mngmtAgentTrap_97 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system could not be locked. System busy. Try command again. "
	::= 136000097


mngmtAgentTrap_98 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Error on remote storage system."
	::= 136000098


mngmtAgentTrap_99 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "This operation can only be completed when the source-destination connection is down."
	::= 136000099


mngmtAgentTrap_100 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Login required - password changed."
	::= 136000100


mngmtAgentTrap_101 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Numerous login attempts have been detected that uses an incorrect password. Please update your system's password in the Storage System Access menu."
	::= 136000101


mngmtAgentTrap_102 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid cookie"
	::= 136000102


mngmtAgentTrap_103 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Login timed out"
	::= 136000103


mngmtAgentTrap_104 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Max snapshot depth reached"
	::= 136000104


mngmtAgentTrap_105 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Attribute mismatch"
	::= 136000105


mngmtAgentTrap_106 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The password has been set in Command View EVA. The same password still needs to be set in the controllers."
	::= 136000106


mngmtAgentTrap_107 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Not host port"
	::= 136000107


mngmtAgentTrap_108 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Duplicate Lun WWID"
	::= 136000108


mngmtAgentTrap_109 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "System Inoperative"
	::= 136000109


mngmtAgentTrap_110 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "SnapClone Active"
	::= 136000110


mngmtAgentTrap_111 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Emu Load Busy"
	::= 136000111


mngmtAgentTrap_112 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Duplicate User Name"
	::= 136000112


mngmtAgentTrap_113 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Drive Reserved For Code Load"
	::= 136000113


mngmtAgentTrap_114 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Already Presented"
	::= 136000114


mngmtAgentTrap_115 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid remote storage system"
	::= 136000115


mngmtAgentTrap_116 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No Lock"
	::= 136000116


mngmtAgentTrap_117 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Maximum Number of Members Exceeded"
	::= 136000117


mngmtAgentTrap_118 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Max Destinations"
	::= 136000118


mngmtAgentTrap_119 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Empty User Name"
	::= 136000119


mngmtAgentTrap_120 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system already initialized"
	::= 136000120


mngmtAgentTrap_121 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Already Open"
	::= 136000121


mngmtAgentTrap_122 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Session Not Open"
	::= 136000122


mngmtAgentTrap_123 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Not Marked Inoperative"
	::= 136000123


mngmtAgentTrap_124 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Media Not Available"
	::= 136000124


mngmtAgentTrap_125 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Battery System Failed"
	::= 136000125


mngmtAgentTrap_126 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "DR Group Member Is Cache Data Lost"
	::= 136000126


mngmtAgentTrap_127 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Internal Lock Collision"
	::= 136000127


mngmtAgentTrap_128 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "OCP Error"
	::= 136000128


mngmtAgentTrap_129 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Mirror Offline"
	::= 136000129


mngmtAgentTrap_130 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "This operation cannot be completed if failsafe mode is enabled."
	::= 136000130


mngmtAgentTrap_131 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Drive firmware load abort due to Raid0 virtual disk(s)."
	::= 136000131


mngmtAgentTrap_132 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Fibre channel ports are unavailable."
	::= 136000132


mngmtAgentTrap_133 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The storage system has reached its maximum number of DR relationship."
	::= 136000133


mngmtAgentTrap_1000 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Logical Disk Condition Change"
	::= 136001000


mngmtAgentTrap_1001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system is FULL  **critical**"
	::= 136001001


mngmtAgentTrap_1002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system is almost FULL. Disk group at or above maximum capacity warning level."
	::= 136001002


mngmtAgentTrap_1003 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Controller Cache Battery Condition Change"
	::= 136001003


mngmtAgentTrap_1004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Controller Cache Condition Change"
	::= 136001004


mngmtAgentTrap_1005 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Controller Condition Change"
	::= 136001005


mngmtAgentTrap_1006 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Controller FC Port Condition Change"
	::= 136001006


mngmtAgentTrap_1007 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Physical Device Condition Change"
	::= 136001007


mngmtAgentTrap_1008 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Physical Store Condition Change"
	::= 136001008


mngmtAgentTrap_1009 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Host condition change"
	::= 136001009


mngmtAgentTrap_1010 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system time has been set"
	::= 136001010


mngmtAgentTrap_1011 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Volume Condition change"
	::= 136001011


mngmtAgentTrap_1012 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Volume insufficient_resources condition change"
	::= 136001012


mngmtAgentTrap_1013 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Volume Quorum Disk change"
	::= 136001013


mngmtAgentTrap_1014 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The state of an object in the system has changed. View adjacent events for more detail."
	::= 136001014


mngmtAgentTrap_2001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Startup Failed"
	::= 136002001


mngmtAgentTrap_2002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Management agent event log cleared successfully"
	::= 136002002


mngmtAgentTrap_2003 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid name specified for storage system"
	::= 136002003


mngmtAgentTrap_2004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system is not initialized"
	::= 136002004


mngmtAgentTrap_2006 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid name specified for Vdisk"
	::= 136002006


mngmtAgentTrap_2007 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk name exceeds maximum length"
	::= 136002007


mngmtAgentTrap_2008 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid parameter specified for Vdisk"
	::= 136002008


mngmtAgentTrap_2010 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Specified Vdisk size exceeds available size"
	::= 136002010


mngmtAgentTrap_2011 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "There are not enough disk drives to create a disk group"
	::= 136002011


mngmtAgentTrap_2012 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Number of devices exceeds the available number of disks"
	::= 136002012


mngmtAgentTrap_2013 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Number of devices is less than the minimum number required to create a disk group"
	::= 136002013


mngmtAgentTrap_2016 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Completed unpresenting virtual disk to host"
	::= 136002016


mngmtAgentTrap_2021 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid refresh interval value. Should be numeric and non-negative."
	::= 136002021


mngmtAgentTrap_2022 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid security message. Should not be blank."
	::= 136002022


mngmtAgentTrap_2023 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk Create Complete"
	::= 136002023


mngmtAgentTrap_2025 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system successfully initialized"
	::= 136002025


mngmtAgentTrap_2026 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Device Added Successfully"
	::= 136002026


mngmtAgentTrap_2030 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Refresh Interval Changed"
	::= 136002030


mngmtAgentTrap_2031 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Security Message Changed"
	::= 136002031


mngmtAgentTrap_2032 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Present Vdisk to a Host - Complete"
	::= 136002032


mngmtAgentTrap_2033 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Control Startup Complete"
	::= 136002033


mngmtAgentTrap_2034 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Change Device Usage Complete"
	::= 136002034


mngmtAgentTrap_2035 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Control Shutdown - Complete"
	::= 136002035


mngmtAgentTrap_2036 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Controller Shutdown - Complete"
	::= 136002036


mngmtAgentTrap_2038 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Control Memory Allocation Failure"
	::= 136002038


mngmtAgentTrap_2040 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Access level denied or session activity timeout. Please log in again."
	::= 136002040


mngmtAgentTrap_2041 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk Snapshot - Completed"
	::= 136002041


mngmtAgentTrap_2042 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk Snapclone - Completed"
	::= 136002042


mngmtAgentTrap_2047 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Host record added successfully"
	::= 136002047


mngmtAgentTrap_2048 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Logical component deleted successfully"
	::= 136002048


mngmtAgentTrap_2049 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid host adapter ID"
	::= 136002049


mngmtAgentTrap_2050 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Specified device is already a member of the system"
	::= 136002050


mngmtAgentTrap_2051 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Create Folder - Completed"
	::= 136002051


mngmtAgentTrap_2052 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Change Object Properties - Completed"
	::= 136002052


mngmtAgentTrap_2057 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Completed disk group creation"
	::= 136002057


mngmtAgentTrap_2058 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Added host port"
	::= 136002058


mngmtAgentTrap_2059 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Discarded host port"
	::= 136002059


mngmtAgentTrap_2060 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EMU/Shelf code load complete"
	::= 136002060


mngmtAgentTrap_2061 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Operation will exceed the available capacity of the disk group"
	::= 136002061


mngmtAgentTrap_2062 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Controller(s) code load complete"
	::= 136002062


mngmtAgentTrap_2063 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The target device is not in the right condition to perform the operation"
	::= 136002063


mngmtAgentTrap_2064 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system Device Addition Policy changed successfully"
	::= 136002064


mngmtAgentTrap_2065 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Maximum number of disk groups exceeded"
	::= 136002065


mngmtAgentTrap_2066 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Nsa object discard failed."
	::= 136002066


mngmtAgentTrap_2067 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "There are not enough disks to meet the minimum number requirement"
	::= 136002067


mngmtAgentTrap_2068 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Entry added successfully in the password file"
	::= 136002068


mngmtAgentTrap_2069 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Entry updated successfully in the password file"
	::= 136002069


mngmtAgentTrap_2070 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Entry discarded successfully in the password file"
	::= 136002070


mngmtAgentTrap_2071 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system is not responding in a timely manner and has been placed into an unknown state. This may be due to a prior command with an excessively long execution time, high I/O load, or a network communications error.  Recovery will automatically occur when the storage system is able to respond.  "
	::= 136002071


mngmtAgentTrap_2072 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Object not found. Operation on this object is completed"
	::= 136002072


mngmtAgentTrap_2073 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "There is no more available space to create a Vdisk"
	::= 136002073


mngmtAgentTrap_2074 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Name or comments contains invalid character(s)"
	::= 136002074


mngmtAgentTrap_2075 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Duplicate - Another object with the same name exists."
	::= 136002075


mngmtAgentTrap_2076 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No healthy disk group(s) to create a Vdisk. Resolve any abnormal conditions in the disk group first."
	::= 136002076


mngmtAgentTrap_2077 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Operating System ID must be a valid number."
	::= 136002077


mngmtAgentTrap_2078 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Watchdog successfully started"
	::= 136002078


mngmtAgentTrap_2079 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Watchdog successfully stopped"
	::= 136002079


mngmtAgentTrap_2080 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Delete Event Config List failed"
	::= 136002080


mngmtAgentTrap_2081 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Disk group meltdown repaired successfully."
	::= 136002081


mngmtAgentTrap_2082 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "There are no available LUNs to present this Vdisk."
	::= 136002082


mngmtAgentTrap_2083 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Controller time synchronization turned on."
	::= 136002083


mngmtAgentTrap_2084 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Controller time synchronization turned off."
	::= 136002084


mngmtAgentTrap_2085 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "System login failed. Invalid password."
	::= 136002085


mngmtAgentTrap_2086 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "System is not set for password validation."
	::= 136002086


mngmtAgentTrap_2087 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Agent is already logged in to this system."
	::= 136002087


mngmtAgentTrap_2088 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system time set to custom time. Controller time synchronization automatically turned off."
	::= 136002088


mngmtAgentTrap_2089 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system time set to SAN appliance time."
	::= 136002089


mngmtAgentTrap_2090 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system time set to browser time. Controller time synchronization automatically turned off."
	::= 136002090


mngmtAgentTrap_2091 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system time set to controller time. Controller time synchronization automatically turned off."
	::= 136002091


mngmtAgentTrap_2092 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to find DR Group on remote storage system."
	::= 136002092


mngmtAgentTrap_2093 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "A host must have at least one port. Cannot delete the only host port available."
	::= 136002093


mngmtAgentTrap_2095 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Host creation failed. Maximum number of hosts reached."
	::= 136002095


mngmtAgentTrap_2096 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Port already exists for this host."
	::= 136002096


mngmtAgentTrap_2097 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Error reading parameter string. String is empty."
	::= 136002097


mngmtAgentTrap_2098 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Command could not be completed on Master. Controller not found."
	::= 136002098


mngmtAgentTrap_2099 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Command could not be completed on Slave. Controller not found."
	::= 136002099


mngmtAgentTrap_2100 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Password access for all known storage systems is already enabled or set."
	::= 136002100


mngmtAgentTrap_2102 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The local storage system has reached the maximum allowable DR relationship."
	::= 136002102


mngmtAgentTrap_2103 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The remote storage system has reached the maximum allowable DR relationship."
	::= 136002103


mngmtAgentTrap_3001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Event Manager Offline"
	::= 136003001


mngmtAgentTrap_3002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Event Manager Online"
	::= 136003002


mngmtAgentTrap_3003 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Event Manager - Startup Failed"
	::= 136003003


mngmtAgentTrap_3004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Event Manager - Startup Complete"
	::= 136003004


mngmtAgentTrap_3007 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Event Manager - Shutdown Complete"
	::= 136003007


mngmtAgentTrap_3009 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to open NSA Local Event Log File"
	::= 136003009


mngmtAgentTrap_3012 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to open Local Temp Event File - possibly no initialized SC"
	::= 136003012


mngmtAgentTrap_3013 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to clear NSA Local Event Log File"
	::= 136003013


mngmtAgentTrap_3015 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to clear NSA Event Log File"
	::= 136003015


mngmtAgentTrap_3016 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Local log file found on startup"
	::= 136003016


mngmtAgentTrap_3017 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Event Queue Flush Error"
	::= 136003017


mngmtAgentTrap_3019 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM File Manager Online"
	::= 136003019


mngmtAgentTrap_3020 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM File Manager Offline"
	::= 136003020


mngmtAgentTrap_3021 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM Log Manager Online"
	::= 136003021


mngmtAgentTrap_3022 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM Log Manager Offline"
	::= 136003022


mngmtAgentTrap_3024 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Local NSA logfile is empty"
	::= 136003024


mngmtAgentTrap_3025 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Event Queue Online"
	::= 136003025


mngmtAgentTrap_3028 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Status Descriptions Unavailable"
	::= 136003028


mngmtAgentTrap_3029 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM Description Mngr Online"
	::= 136003029


mngmtAgentTrap_3035 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: NSA log file unavailable"
	::= 136003035


mngmtAgentTrap_3036 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM Memory Allocation Error"
	::= 136003036


mngmtAgentTrap_3037 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: Local Event Configuration File Unavailable"
	::= 136003037


mngmtAgentTrap_3038 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: MLD Notification File Unavailable - retrieving local backup copy"
	::= 136003038


mngmtAgentTrap_3039 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: Local Notification Host List File Unavailable"
	::= 136003039


mngmtAgentTrap_3044 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Override this description with missing filename"
	::= 136003044


mngmtAgentTrap_3045 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid storage system event sequence number - can't retrieve event"
	::= 136003045


mngmtAgentTrap_3046 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid SC termination event sequence number - can't retrieve event"
	::= 136003046


mngmtAgentTrap_3047 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: Event config file unavailable from MLD - retrieving local backup copy"
	::= 136003047


mngmtAgentTrap_3048 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: Local user defined event state file unavailable"
	::= 136003048


mngmtAgentTrap_3049 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: EMU event monitoring thread unable to start"
	::= 136003049


mngmtAgentTrap_3050 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: EMU event - this description will be overwritten"
	::= 136003050


mngmtAgentTrap_3051 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: Failed to write Event Config file to MLD"
	::= 136003051


mngmtAgentTrap_3053 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: Event Configuration Filename Error or File empty"
	::= 136003053


mngmtAgentTrap_3054 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: Notification Hostlist Filename Error or File empty"
	::= 136003054


mngmtAgentTrap_3055 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: Event Config List Object Reference Error"
	::= 136003055


mngmtAgentTrap_3056 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: SC Parse File successfully uploaded"
	::= 136003056


mngmtAgentTrap_3057 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: SC Parse File upload failed"
	::= 136003057


mngmtAgentTrap_3058 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: Contents of the uploaded parse file invalid - unexpected contents"
	::= 136003058


mngmtAgentTrap_3059 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: Parse file is empty"
	::= 136003059


mngmtAgentTrap_3060 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system being shutdown due to a command failure."
	::= 136003060


mngmtAgentTrap_3061 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: Could not retrieve a storage system event"
	::= 136003061


mngmtAgentTrap_3062 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: Init SC Event config list failed"
	::= 136003062


mngmtAgentTrap_3063 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Could not initialize Comm infrastructure for event logging to system log"
	::= 136003063


mngmtAgentTrap_3064 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: Storage system pointer is NULL!"
	::= 136003064


mngmtAgentTrap_3065 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: Failed to log event to the Appliance event log: check if log is full"
	::= 136003065


mngmtAgentTrap_3066 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: Description Mngr initialize storage system failed"
	::= 136003066


mngmtAgentTrap_3067 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: Description file too small. File read problem Or Incomplete file."
	::= 136003067


mngmtAgentTrap_3068 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: Can't init NT Event object pointer"
	::= 136003068


mngmtAgentTrap_3069 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: Can't init NT Notification object pointer"
	::= 136003069


mngmtAgentTrap_3070 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: Appliance Event Logging Failure - log may be full"
	::= 136003070


mngmtAgentTrap_3071 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: SCMI returned bad additional events number"
	::= 136003071


mngmtAgentTrap_3072 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: SCMI returned zero sized SC Event"
	::= 136003072


mngmtAgentTrap_3075 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EventQueue index passed is out of bounds"
	::= 136003075


mngmtAgentTrap_3076 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: An abnormal number of duplicate events logged - dropping duplicates"
	::= 136003076


mngmtAgentTrap_3077 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: Update of the MLD Status Description file failed"
	::= 136003077


mngmtAgentTrap_3078 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: NsaStatusDescriptions.txt open file error"
	::= 136003078


mngmtAgentTrap_3079 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "EM: NsaStatusDescriptions.txt file error - file size discrepancy from mld list"
	::= 136003079


mngmtAgentTrap_3080 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "SC Event Log has been cleared and restarted.  Possible RAID1 Meltdown."
	::= 136003080


mngmtAgentTrap_3081 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid logType parameter"
	::= 136003081


mngmtAgentTrap_3083 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Log file is empty"
	::= 136003083


mngmtAgentTrap_3084 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage System with this WWN is not visible to this agent or the WWN is invalid"
	::= 136003084


mngmtAgentTrap_3086 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Parsefile for current firmware version not found.  Upload correct parse file."
	::= 136003086


mngmtAgentTrap_3090 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The contents of this file appear to be invalid"
	::= 136003090


mngmtAgentTrap_3091 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The MIB failed to build due to a missing parse file."
	::= 136003091


mngmtAgentTrap_3092 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "MLD description file is older than local file but system is downrev"
	::= 136003092


mngmtAgentTrap_3094 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "System is initialized: can't get activeQ events"
	::= 136003094


mngmtAgentTrap_3095 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Failed to write file - file could not be opened."
	::= 136003095


mngmtAgentTrap_4000 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "MLD Manager Subsystem Error"
	::= 136004000


mngmtAgentTrap_4001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "MLD Manager Offline"
	::= 136004001


mngmtAgentTrap_4004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "MLD Manager Startup Complete"
	::= 136004004


mngmtAgentTrap_4005 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "MLD Manager Abnormal Startup"
	::= 136004005


mngmtAgentTrap_4007 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "MLD Manager Shutdown Complete"
	::= 136004007


mngmtAgentTrap_4011 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid Host IP Address specified"
	::= 136004011


mngmtAgentTrap_4012 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to open the NsaMldMgr.dat file for Write"
	::= 136004012


mngmtAgentTrap_4013 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to open the NsaMldMgr.dat file for Read"
	::= 136004013


mngmtAgentTrap_4014 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Agent Uid does not exist"
	::= 136004014


mngmtAgentTrap_4015 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to find object"
	::= 136004015


mngmtAgentTrap_4016 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to store object"
	::= 136004016


mngmtAgentTrap_4017 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to find storage system object"
	::= 136004017


mngmtAgentTrap_4018 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to create MLD"
	::= 136004018


mngmtAgentTrap_4020 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "lastSafeChoiceDelay Expired"
	::= 136004020


mngmtAgentTrap_4021 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "crashDetectDelay Expired"
	::= 136004021


mngmtAgentTrap_4023 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to read Copy1 of MLD"
	::= 136004023


mngmtAgentTrap_4024 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Copy 1 of MLD Invalid"
	::= 136004024


mngmtAgentTrap_4025 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid Copy block of MLD"
	::= 136004025


mngmtAgentTrap_4027 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "MLD database capacity not equal to true MLD capacity"
	::= 136004027


mngmtAgentTrap_4028 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Backup range out of bounds of copy 1 range"
	::= 136004028


mngmtAgentTrap_4029 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "MLD Manager Lock Crash DetectDelay has expired, just taking lock!"
	::= 136004029


mngmtAgentTrap_4030 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "MLD Copy 1 Restored"
	::= 136004030


mngmtAgentTrap_4031 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "MLD Copy 2 Restored"
	::= 136004031


mngmtAgentTrap_4032 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to find UidAssoc Object"
	::= 136004032


mngmtAgentTrap_4033 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to store UID Association Object"
	::= 136004033


mngmtAgentTrap_4034 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to find UidAssoc Object"
	::= 136004034


mngmtAgentTrap_4035 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to read last Fusion event read"
	::= 136004035


mngmtAgentTrap_4036 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "MLD Notification Queue Empty"
	::= 136004036


mngmtAgentTrap_4037 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to find Notification Object"
	::= 136004037


mngmtAgentTrap_4040 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to read Event Log Pointer"
	::= 136004040


mngmtAgentTrap_4041 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to read Event Log"
	::= 136004041


mngmtAgentTrap_4042 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to store Event Log"
	::= 136004042


mngmtAgentTrap_4043 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to read Event Log"
	::= 136004043


mngmtAgentTrap_4047 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Previously Read Object Properties do not Match"
	::= 136004047


mngmtAgentTrap_4048 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Previously Read Object Properties do not Match"
	::= 136004048


mngmtAgentTrap_4049 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to read  Notification Host List"
	::= 136004049


mngmtAgentTrap_4050 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to store Notification Host List"
	::= 136004050


mngmtAgentTrap_4051 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to store Notification Host List and free Lock"
	::= 136004051


mngmtAgentTrap_4052 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to read  Event Configuration List"
	::= 136004052


mngmtAgentTrap_4053 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to store Event Configuration List"
	::= 136004053


mngmtAgentTrap_4054 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to store Event Configuration List and free Lock"
	::= 136004054


mngmtAgentTrap_4058 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "MLD Manager Mutex Timeout error"
	::= 136004058


mngmtAgentTrap_4059 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "MLD Manager list is empty"
	::= 136004059


mngmtAgentTrap_5001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Monitor Startup Complete"
	::= 136005001


mngmtAgentTrap_5002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Monitor Startup Failed"
	::= 136005002


mngmtAgentTrap_5003 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Monitor ShutDown Complete"
	::= 136005003


mngmtAgentTrap_5004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Monitor Memory Allocation Failure"
	::= 136005004


mngmtAgentTrap_5005 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Monitor Mark Agent as Inactive"
	::= 136005005


mngmtAgentTrap_5006 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Monitor create thread error"
	::= 136005006


mngmtAgentTrap_5007 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Monitor create timer error"
	::= 136005007


mngmtAgentTrap_5008 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Monitor agent registration - Complete"
	::= 136005008


mngmtAgentTrap_5010 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Monitor initiated a storage system management shutdown because of controller failures"
	::= 136005010


mngmtAgentTrap_5011 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unknown storage system rediscovery complete "
	::= 136005011


mngmtAgentTrap_5012 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Start monitoring thread for storage system - Complete"
	::= 136005012


mngmtAgentTrap_5013 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Start monitoring thread for storage system - Fail"
	::= 136005013


mngmtAgentTrap_5014 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Monitoring thread for storage system terminated"
	::= 136005014


mngmtAgentTrap_5015 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Rediscover unknown storage system - Error"
	::= 136005015


mngmtAgentTrap_5016 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Controller time synchronized to appliance time."
	::= 136005016


mngmtAgentTrap_5017 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Appliance and controller time checked for synchronization."
	::= 136005017


mngmtAgentTrap_5018 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Controller and appliance time are the same. No need to synchronize."
	::= 136005018


mngmtAgentTrap_5019 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Exception caught in monitoring process."
	::= 136005019


mngmtAgentTrap_6001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ready"
	::= 136006001


mngmtAgentTrap_6002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Index Out of Range"
	::= 136006002


mngmtAgentTrap_6003 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Cannot access storage system. Communications error."
	::= 136006003


mngmtAgentTrap_6004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No controllers found"
	::= 136006004


mngmtAgentTrap_6005 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid Index"
	::= 136006005


mngmtAgentTrap_6006 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Memory allocation failure"
	::= 136006006


mngmtAgentTrap_6007 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No physical stores found"
	::= 136006007


mngmtAgentTrap_6008 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No storage system found"
	::= 136006008


mngmtAgentTrap_6009 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No disk group found"
	::= 136006009


mngmtAgentTrap_6010 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Too many disk groups"
	::= 136006010


mngmtAgentTrap_6011 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No volumes found"
	::= 136006011


mngmtAgentTrap_6012 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No Logical Disks Found"
	::= 136006012


mngmtAgentTrap_6013 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Context ID changed during operation"
	::= 136006013


mngmtAgentTrap_6014 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No Name"
	::= 136006014


mngmtAgentTrap_6015 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Name Size Exceeded"
	::= 136006015


mngmtAgentTrap_6016 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Shutdown Complete"
	::= 136006016


mngmtAgentTrap_6017 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Mutex Creation Failure"
	::= 136006017


mngmtAgentTrap_6018 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The command has timed out. Storage system is busy processing previous command."
	::= 136006018


mngmtAgentTrap_6019 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No MLD Handle Set"
	::= 136006019


mngmtAgentTrap_6020 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Failed Transport Layer Communication - No Such Id"
	::= 136006020


mngmtAgentTrap_6021 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Failed Transport Layer Communication - TimeOut"
	::= 136006021


mngmtAgentTrap_6022 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No initialized storage system objects found"
	::= 136006022


mngmtAgentTrap_6023 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No Attached Port Found"
	::= 136006023


mngmtAgentTrap_6024 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Failed to get SCMI Object Handle"
	::= 136006024


mngmtAgentTrap_6025 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Shutdown Both Restart And Power Off Requested"
	::= 136006025


mngmtAgentTrap_6026 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Shutdown Drive Shelf Power Off But No Enclosure Power Off Requested"
	::= 136006026


mngmtAgentTrap_6027 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Shutdown Disable Battery But No Enclosure Power Off Requested"
	::= 136006027


mngmtAgentTrap_6028 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Shutdown Disable Battery But Shutdown Unconditional Requested"
	::= 136006028


mngmtAgentTrap_6029 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Shutdown Delay Out Of Range"
	::= 136006029


mngmtAgentTrap_6030 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Cache Write Failure"
	::= 136006030


mngmtAgentTrap_6031 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Battery Disable Failure"
	::= 136006031


mngmtAgentTrap_6032 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Drive Shelf Disable Failure"
	::= 136006032


mngmtAgentTrap_6033 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Battery Disable Failed on Both Controllers Batteries"
	::= 136006033


mngmtAgentTrap_6034 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Battery Disable Failed on This Controllers Battery"
	::= 136006034


mngmtAgentTrap_6035 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Battery Disable Failed on the Other Controllers Battery"
	::= 136006035


mngmtAgentTrap_6036 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Requested disk failure protection level is set. Actual level will change when sufficient disk space is available."
	::= 136006036


mngmtAgentTrap_6037 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Physical Store Contains Stale or Foreign Volume Information."
	::= 136006037


mngmtAgentTrap_6038 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Controller Resynchronization or Reboot Occurred. Context Error"
	::= 136006038


mngmtAgentTrap_8001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid Operation"
	::= 136008001


mngmtAgentTrap_8002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system already created"
	::= 136008002


mngmtAgentTrap_8003 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Controller already part of storage system configuration"
	::= 136008003


mngmtAgentTrap_8004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Physical Store Count Below Minimum"
	::= 136008004


mngmtAgentTrap_8005 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Controller not part of storage system configuration"
	::= 136008005


mngmtAgentTrap_8006 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Failed to uninitialize storage system"
	::= 136008006


mngmtAgentTrap_8007 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system File Open Error"
	::= 136008007


mngmtAgentTrap_8008 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system File Write Error"
	::= 136008008


mngmtAgentTrap_8009 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system File Read Error"
	::= 136008009


mngmtAgentTrap_8010 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Name too long"
	::= 136008010


mngmtAgentTrap_8011 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No String Error"
	::= 136008011


mngmtAgentTrap_8012 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No MLD Handle Found"
	::= 136008012


mngmtAgentTrap_8013 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No Controllers Found"
	::= 136008013


mngmtAgentTrap_8014 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Controller Not Found On Loop"
	::= 136008014


mngmtAgentTrap_8015 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No Disk Groups Found"
	::= 136008015


mngmtAgentTrap_8016 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No Volumes Found"
	::= 136008016


mngmtAgentTrap_8017 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No Physical Stores Found"
	::= 136008017


mngmtAgentTrap_8018 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No Vdisks Found"
	::= 136008018


mngmtAgentTrap_8019 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No Hosts Found"
	::= 136008019


mngmtAgentTrap_8020 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Name already exists"
	::= 136008020


mngmtAgentTrap_8021 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Folder is not empty"
	::= 136008021


mngmtAgentTrap_8022 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Spares goal could not be met"
	::= 136008022


mngmtAgentTrap_8023 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system object found"
	::= 136008023


mngmtAgentTrap_8024 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system object not found"
	::= 136008024


mngmtAgentTrap_8025 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "New Physical Store Detected But Not Found In Physical Store List"
	::= 136008025


mngmtAgentTrap_8026 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "MldManager Handle is NULL"
	::= 136008026


mngmtAgentTrap_8027 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "NscMngrInterface Handle is NULL"
	::= 136008027


mngmtAgentTrap_8028 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "ScLockMngr Handle is NULL"
	::= 136008028


mngmtAgentTrap_8029 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system initialization failed"
	::= 136008029


mngmtAgentTrap_8030 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "MldMngr, NscMngrInterfaceMngr, or ScLockMngr Handle is NULL"
	::= 136008030


mngmtAgentTrap_8031 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system initialization failed"
	::= 136008031


mngmtAgentTrap_8032 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system discovery failed"
	::= 136008032


mngmtAgentTrap_8033 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system already uninitialized or does not exist"
	::= 136008033


mngmtAgentTrap_8034 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Total Storage Failed"
	::= 136008034


mngmtAgentTrap_8035 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system is uninitialized"
	::= 136008035


mngmtAgentTrap_8036 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Total Storage Available Failed"
	::= 136008036


mngmtAgentTrap_8037 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Total Storage Occupied Failed"
	::= 136008037


mngmtAgentTrap_8038 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Total Storage Free Failed"
	::= 136008038


mngmtAgentTrap_8039 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Disk Group Failed"
	::= 136008039


mngmtAgentTrap_8040 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Disk Group List Failed"
	::= 136008040


mngmtAgentTrap_8041 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Disk Group Count Failed"
	::= 136008041


mngmtAgentTrap_8042 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Create Volume Failed"
	::= 136008042


mngmtAgentTrap_8043 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Volume Failed"
	::= 136008043


mngmtAgentTrap_8044 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Volumes Failed"
	::= 136008044


mngmtAgentTrap_8045 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Volumes Count Failed"
	::= 136008045


mngmtAgentTrap_8046 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Vdisk Failed"
	::= 136008046


mngmtAgentTrap_8047 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Vdisk List Failed"
	::= 136008047


mngmtAgentTrap_8048 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Physical Store Failed"
	::= 136008048


mngmtAgentTrap_8049 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Physical Stores Failed"
	::= 136008049


mngmtAgentTrap_8050 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Physical Stores Count Failed"
	::= 136008050


mngmtAgentTrap_8051 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Create Vdisk Failed"
	::= 136008051


mngmtAgentTrap_8052 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Delete Vdisk Failed"
	::= 136008052


mngmtAgentTrap_8053 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Device Addition Policy Failed"
	::= 136008053


mngmtAgentTrap_8054 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Spares Current Failed"
	::= 136008054


mngmtAgentTrap_8055 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Spares Goal Failed"
	::= 136008055


mngmtAgentTrap_8056 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get storage system events failed"
	::= 136008056


mngmtAgentTrap_8057 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Volume Replacement Delay Failed"
	::= 136008057


mngmtAgentTrap_8058 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Set Device Addition Policy Failed"
	::= 136008058


mngmtAgentTrap_8059 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Set Spares Goal Failed"
	::= 136008059


mngmtAgentTrap_8060 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Set Volume Replacement Delay Failed"
	::= 136008060


mngmtAgentTrap_8061 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Create controller Failed"
	::= 136008061


mngmtAgentTrap_8062 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Update controller Failed"
	::= 136008062


mngmtAgentTrap_8063 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Create Host Failed"
	::= 136008063


mngmtAgentTrap_8064 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Discard Host Failed"
	::= 136008064


mngmtAgentTrap_8065 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Host Failed"
	::= 136008065


mngmtAgentTrap_8066 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Host List Failed"
	::= 136008066


mngmtAgentTrap_8067 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Host Count Failed"
	::= 136008067


mngmtAgentTrap_8068 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Presented Unit List Failed"
	::= 136008068


mngmtAgentTrap_8069 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Presented Unit Count Failed"
	::= 136008069


mngmtAgentTrap_8070 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Free View Failed"
	::= 136008070


mngmtAgentTrap_8071 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system shutdown Failed"
	::= 136008071


mngmtAgentTrap_8073 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Derived Unit List Failed"
	::= 136008073


mngmtAgentTrap_8074 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Derived Unit Count Failed"
	::= 136008074


mngmtAgentTrap_8075 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Vdisk list failed"
	::= 136008075


mngmtAgentTrap_8076 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Get Vdisk count failed"
	::= 136008076


mngmtAgentTrap_8077 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Error while building Vdisk root view"
	::= 136008077


mngmtAgentTrap_8078 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Error while building host root view"
	::= 136008078


mngmtAgentTrap_8079 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Error while building disk group root view"
	::= 136008079


mngmtAgentTrap_8080 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Error while building hardware root view"
	::= 136008080


mngmtAgentTrap_8081 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Specified time format is incorrect"
	::= 136008081


mngmtAgentTrap_8082 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Error creating/opening time synchronization file."
	::= 136008082


mngmtAgentTrap_8083 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "NSCList reordered."
	::= 136008083


mngmtAgentTrap_8084 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "NscList mutex Get error"
	::= 136008084


mngmtAgentTrap_8085 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage System is managed by another agent"
	::= 136008085


mngmtAgentTrap_8086 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Memory allocation failure"
	::= 136008086


mngmtAgentTrap_8087 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Failed to obtain list of DR Groups"
	::= 136008087


mngmtAgentTrap_8088 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Failed to obtain count of DR Groups"
	::= 136008088


mngmtAgentTrap_8089 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Failed to build DR Group view"
	::= 136008089


mngmtAgentTrap_8090 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No Devices found on Controller Back End Loops"
	::= 136008090


mngmtAgentTrap_9001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk File Open Error"
	::= 136009001


mngmtAgentTrap_9002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk File Write Error"
	::= 136009002


mngmtAgentTrap_9003 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk File Read Error"
	::= 136009003


mngmtAgentTrap_9004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk name too long"
	::= 136009004


mngmtAgentTrap_9005 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk No String Error"
	::= 136009005


mngmtAgentTrap_9006 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk No Object Error"
	::= 136009006


mngmtAgentTrap_9007 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk still exists"
	::= 136009007


mngmtAgentTrap_9008 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk Invalid Value"
	::= 136009008


mngmtAgentTrap_9009 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "An outstanding command is still in progress for the Vdisk"
	::= 136009009


mngmtAgentTrap_9010 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Requested Vdisk size exceeds the available size"
	::= 136009010


mngmtAgentTrap_9011 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk size may be expanded but not reduced"
	::= 136009011


mngmtAgentTrap_9012 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Operation on a fast Vdisk deletion completed"
	::= 136009012


mngmtAgentTrap_9013 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Operation on a fast Vdisk creation completed"
	::= 136009013


mngmtAgentTrap_9014 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Operation on a fast Vdisk size expansion completed"
	::= 136009014


mngmtAgentTrap_9015 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk cache data lost error"
	::= 136009015


mngmtAgentTrap_9016 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk data lost error resolved"
	::= 136009016


mngmtAgentTrap_9017 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Operation rejected - The Vdisk has a sharing relationship with another object "
	::= 136009017


mngmtAgentTrap_9018 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Operation on this Vdisk was rejected due to its degraded condition"
	::= 136009018


mngmtAgentTrap_9019 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Operation on this Vdisk can only be performed if it is presented to a host"
	::= 136009019


mngmtAgentTrap_9020 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Cache policies cannot be modified if Vdisk is presented to a host"
	::= 136009020


mngmtAgentTrap_9021 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Allowed property changes successful. (Cache policy changes not allowed while Vdisk is presented to a host.)"
	::= 136009021


mngmtAgentTrap_9022 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Requested redundancy type cannot be implemented with the current disk group condition."
	::= 136009022


mngmtAgentTrap_9023 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Your Vdisk was created but cannot be presented at this time. It can be presented when it is fully allocated."
	::= 136009023


mngmtAgentTrap_9025 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk device data lost error"
	::= 136009025


mngmtAgentTrap_9026 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The most significant hex character in a World Wide LUN Name must be a 6."
	::= 136009026


mngmtAgentTrap_9027 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Virtual disk cache and inoperative data lost error"
	::= 136009027


mngmtAgentTrap_9028 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Virtual disk inoperative data lost error"
	::= 136009028


mngmtAgentTrap_9029 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Virtual disk condition failed because of an inoperative data lost error."
	::= 136009029


mngmtAgentTrap_9030 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk is a snapshot. The following properties cannot be changed: Preferred Path, Requested Size, Write-Back Cache Policy."
	::= 136009030


mngmtAgentTrap_9031 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The World Wide LUN Name cannot be changed for a presented Vdisk Active member or snapshot."
	::= 136009031


mngmtAgentTrap_9032 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unknown property, request rejected"
	::= 136009032


mngmtAgentTrap_9033 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "This Vdisk was deleted as the indirect result of another user command."
	::= 136009033


mngmtAgentTrap_9034 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The requested allocation policy cannot be satisfied. A different allocation policy is already in use by another snapshot in the same family."
	::= 136009034


mngmtAgentTrap_9035 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The deletion of this Vdisk cannot take place.  The original Vdisk that this is being snapcloned from is in a VRaid1 Meltdown state which must first be resolved."
	::= 136009035


mngmtAgentTrap_9036 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Synchronous creation of virtual disk has been aborted due to an internal error. Switching to asynchronous mode to complete the virtual disk creation."
	::= 136009036


mngmtAgentTrap_10001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage Object Broker Ready"
	::= 136010001


mngmtAgentTrap_10004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage system is not initialized"
	::= 136010004


mngmtAgentTrap_10006 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "SOB Memory Allocation Failure"
	::= 136010006


mngmtAgentTrap_10010 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Your initialized system must have at least one disk group"
	::= 136010010


mngmtAgentTrap_10011 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Cannot talk to all available controllers"
	::= 136010011


mngmtAgentTrap_10012 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Command rejected - Folder is not empty"
	::= 136010012


mngmtAgentTrap_10013 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Command rejected - Vdisk(s) or a data replication log are contained in this disk group"
	::= 136010013


mngmtAgentTrap_10014 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Command rejected - Vdisk(s) are presented to this host"
	::= 136010014


mngmtAgentTrap_10015 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Command rejected - This Vdisk has a sharing relationship with another object "
	::= 136010015


mngmtAgentTrap_10017 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Command rejected - Number of disk groups will exceed the maximum allowable number "
	::= 136010017


mngmtAgentTrap_10018 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Cannot access the password file "
	::= 136010018


mngmtAgentTrap_10019 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Enterprise Login - Complete"
	::= 136010019


mngmtAgentTrap_10020 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Command rejected - Disks in the group would go below the minimum required number."
	::= 136010020


mngmtAgentTrap_10021 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Rediscovery of controllers - Complete"
	::= 136010021


mngmtAgentTrap_10022 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to establish communication with controller, check all connections. "
	::= 136010022


mngmtAgentTrap_10023 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Disk Group Data Lost Error Resolution Sequence 3 - Disk group resolved to normal"
	::= 136010023


mngmtAgentTrap_10024 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Disk Group Data Lost Error Resolution Sequence 1 - Failed Vdisks marked for deletion"
	::= 136010024


mngmtAgentTrap_10025 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Disk Group Data Lost Error Resolution Sequence 2 - Failed Vdisks deleted"
	::= 136010025


mngmtAgentTrap_10026 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Disk Group Data Lost Error Resolution Sequence 3 - Disk group deleted"
	::= 136010026


mngmtAgentTrap_10027 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Creating the Vdisk would exceed the maximum allowable Vdisk count"
	::= 136010027


mngmtAgentTrap_10028 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Volume insufficient resources"
	::= 136010028


mngmtAgentTrap_10029 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Process mutex is locked"
	::= 136010029


mngmtAgentTrap_10030 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid URL request type"
	::= 136010030


mngmtAgentTrap_10031 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid URL object type"
	::= 136010031


mngmtAgentTrap_10035 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The snapshot/Snapclone license cannot be validated. Either the license key has not been entered, or there is a system communication failure."
	::= 136010035


mngmtAgentTrap_10036 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "A data replication license cannot be validated. Either the license key has not been entered, or there is a system communication failure."
	::= 136010036


mngmtAgentTrap_10037 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Object name should not be empty or exceed its maximum length"
	::= 136010037


mngmtAgentTrap_10038 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Object comments exceeds maximum length"
	::= 136010038


mngmtAgentTrap_10039 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Vdisk does not meet the requirements to be part of a DR group."
	::= 136010039


mngmtAgentTrap_10040 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The Eva selected as the Destination for the DR group is invalid. Either it has a DR relationship with another EVA or it is not the same EVA that the source EVA presently has a DR relationship with."
	::= 136010040


mngmtAgentTrap_10041 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Cannot group the specified disk device because the disk is already in a disk group."
	::= 136010041


mngmtAgentTrap_10042 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Cannot ungroup the specified disk device because the disk is not grouped."
	::= 136010042


mngmtAgentTrap_10043 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Object ID provided, or object type, is invalid for the requested operation."
	::= 136010043


mngmtAgentTrap_10044 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Specified remote disk group does not exist."
	::= 136010044


mngmtAgentTrap_11001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Agent startup complete"
	::= 136011001


mngmtAgentTrap_11002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Agent shutdown complete"
	::= 136011002


mngmtAgentTrap_11003 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Insufficient memory to create a new object, Heap may be full!"
	::= 136011003


mngmtAgentTrap_11004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Agent Startup Failed"
	::= 136011004


mngmtAgentTrap_12001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Nsc Manager Interface No controllers Found"
	::= 136012001


mngmtAgentTrap_12002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Nsc Manager Interface Index Out Of Range"
	::= 136012002


mngmtAgentTrap_12003 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Unable to process command at this time. Retry the command or check all connections. "
	::= 136012003


mngmtAgentTrap_12004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Nsc Manager Interface Initialization Complete"
	::= 136012004


mngmtAgentTrap_12005 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Nsc Manager Interface Initialization Failed"
	::= 136012005


mngmtAgentTrap_12008 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No Disk Groups Available For Access"
	::= 136012008


mngmtAgentTrap_13002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Notification Mngr Online"
	::= 136013002


mngmtAgentTrap_13003 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Notification Mngr Offline"
	::= 136013003


mngmtAgentTrap_13004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "NM Startup Complete"
	::= 136013004


mngmtAgentTrap_13007 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Notification Failed"
	::= 136013007


mngmtAgentTrap_13009 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Notification Failed - Network Error"
	::= 136013009


mngmtAgentTrap_13012 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "NM Prev Failed Notification Successfully Notified"
	::= 136013012


mngmtAgentTrap_13015 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "NM SNMP Packet Failed"
	::= 136013015


mngmtAgentTrap_13017 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "NM Memory Allocation Error"
	::= 136013017


mngmtAgentTrap_13018 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "NM StorageCell handle is NULL"
	::= 136013018


mngmtAgentTrap_13019 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "NM User defined event state file is empty"
	::= 136013019


mngmtAgentTrap_13020 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "NM Notification Failed - Notification Matrix is NULL "
	::= 136013020


mngmtAgentTrap_14001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "View Already Exists"
	::= 136014001


mngmtAgentTrap_14002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "View Is Not Set"
	::= 136014002


mngmtAgentTrap_14003 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No View Object(s) Found"
	::= 136014003


mngmtAgentTrap_14004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "View Index Is Out Of Range"
	::= 136014004


mngmtAgentTrap_14005 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "View Object - Invalid Object Condition"
	::= 136014005


mngmtAgentTrap_14006 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "View Object - Invalid Object Type"
	::= 136014006


mngmtAgentTrap_14007 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "View List Pointer is NULL"
	::= 136014007


mngmtAgentTrap_14008 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "View Object Pointer is NULL"
	::= 136014008


mngmtAgentTrap_14009 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Building View List Object - Complete"
	::= 136014009


mngmtAgentTrap_14010 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Building View List Object - Failed"
	::= 136014010


mngmtAgentTrap_14012 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "View Find by UID Failed"
	::= 136014012


mngmtAgentTrap_14013 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "View Find by Type Failed"
	::= 136014013


mngmtAgentTrap_14017 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "View Find by Type by Name Failed"
	::= 136014017


mngmtAgentTrap_15001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Tree View Symbol Not Found"
	::= 136015001


mngmtAgentTrap_15002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Tree View Id Symbol Not Found"
	::= 136015002


mngmtAgentTrap_15003 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Tree Cursor Symbol Not Found"
	::= 136015003


mngmtAgentTrap_15004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Tree Cursor Id Symbol Not Found"
	::= 136015004


mngmtAgentTrap_15005 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Tree Sibling Symbol Not Found"
	::= 136015005


mngmtAgentTrap_15006 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Tree Total Children Symbol Not Found"
	::= 136015006


mngmtAgentTrap_15007 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Tree Expansion Symbol Not Found"
	::= 136015007


mngmtAgentTrap_15008 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Tree Contraction Symbol Not Found"
	::= 136015008


mngmtAgentTrap_15009 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Tree Invalid Descriptor String"
	::= 136015009


mngmtAgentTrap_16001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema Short Status - Reissue Command"
	::= 136016001


mngmtAgentTrap_16004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema Invalid Handle Set In Request Packet"
	::= 136016004


mngmtAgentTrap_16005 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema No Pstore At Referenced Location"
	::= 136016005


mngmtAgentTrap_16008 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema No Device Found"
	::= 136016008


mngmtAgentTrap_16010 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema Could Not Find SubEnclosure in Configuration List"
	::= 136016010


mngmtAgentTrap_16012 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema Non-specific error occurred "
	::= 136016012


mngmtAgentTrap_16013 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema Shelf WWN Could Not Be Accessed Through A Drive"
	::= 136016013


mngmtAgentTrap_16014 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema EMU Failed To Enter Primary Mode"
	::= 136016014


mngmtAgentTrap_16015 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema EMU Failed To Exit Primary Mode"
	::= 136016015


mngmtAgentTrap_16016 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema Downloaded File Does Not Contain Valid Fibre Channel Loader [status:1]"
	::= 136016016


mngmtAgentTrap_16017 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema Downloaded File Format Is Not Recognized [status:2]"
	::= 136016017


mngmtAgentTrap_16018 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema Incorrect Firmware In Downloaded File [status:3]"
	::= 136016018


mngmtAgentTrap_16019 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema Downloaded Loader is Too Large [status:4]"
	::= 136016019


mngmtAgentTrap_16020 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema Invalid Checksum [status:5]"
	::= 136016020


mngmtAgentTrap_16021 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema Previous Offset Plus Previous Length Not Equal To Current Offset [status:6]"
	::= 136016021


mngmtAgentTrap_16022 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema Downloaded Loader Terminated Incorrectly [status:7]"
	::= 136016022


mngmtAgentTrap_16023 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema EMU Out Of Memory [status:8]"
	::= 136016023


mngmtAgentTrap_16024 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema EMU CDB Timeout -- Download Aborted [status:9]"
	::= 136016024


mngmtAgentTrap_16025 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema EMU Internal State Machine Error [status:10]"
	::= 136016025


mngmtAgentTrap_16026 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema EMU Flash Erasure Failure [status:11]"
	::= 136016026


mngmtAgentTrap_16027 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema EMU In Primary Mode - Cannot Download To Primary EMU [status:12]"
	::= 136016027


mngmtAgentTrap_16028 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema Previous Offset Plus Previous Length Greater Than Total Size [status:13]"
	::= 136016028


mngmtAgentTrap_16029 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema Current Total Size Different From Previous Total Size [status:14]"
	::= 136016029


mngmtAgentTrap_16030 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema Could Not Restore Reporting Group Number. Final Download Record Error"
	::= 136016030


mngmtAgentTrap_16031 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema Could Not Recovery From Invop. Invop Retries Exhausted"
	::= 136016031


mngmtAgentTrap_16032 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema Requested WWN Does Not Match Enclosure WWN"
	::= 136016032


mngmtAgentTrap_16033 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema EMU Enclosure Services Error Occurred. EMU May Be Unavailable or Not Installed"
	::= 136016033


mngmtAgentTrap_16034 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema SCSI Error Occurred While Trying To Communicate With EMU"
	::= 136016034


mngmtAgentTrap_16035 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema Could Not Open EMU Firmware File"
	::= 136016035


mngmtAgentTrap_16036 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema EMU Firmware File Name Is Null"
	::= 136016036


mngmtAgentTrap_16037 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema EMU Firmware Download Retries Exhausted. Manual Download May Be Required"
	::= 136016037


mngmtAgentTrap_16038 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema EMU Current Firmware Version Matches Upgrade Firmware Version. No Upgrade Will Be Performed."
	::= 136016038


mngmtAgentTrap_16039 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema EMU Firmware Upgrade Success"
	::= 136016039


mngmtAgentTrap_16040 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Ema EMU In Load State. Do Not Power Off. Reload EMU Firmware "
	::= 136016040


mngmtAgentTrap_17001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Drive Code Load Descriptor File Open Error"
	::= 136017001


mngmtAgentTrap_17002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Drive Code Load Descriptor File Parsing Error - Invalid Line"
	::= 136017002


mngmtAgentTrap_17003 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Drive Code Load Image File Open Error, "
	::= 136017003


mngmtAgentTrap_17004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Drive Code Load Image File Error Getting File Size"
	::= 136017004


mngmtAgentTrap_17005 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Drive Code Load Image File Buffer Allocation Error"
	::= 136017005


mngmtAgentTrap_17006 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Drive Code Load Image File Read Error"
	::= 136017006


mngmtAgentTrap_17007 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Drive Code Load Drive Firmware Update Failed "
	::= 136017007


mngmtAgentTrap_17008 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Drive Code Load Drive Inquiry Failed"
	::= 136017008


mngmtAgentTrap_17009 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Drive Code Load Format Command Failed"
	::= 136017009


mngmtAgentTrap_17012 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Drive Code Load Get Physical Store Condition Failed"
	::= 136017012


mngmtAgentTrap_17013 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Drive Code Load Get Volume Condition Failed"
	::= 136017013


mngmtAgentTrap_17014 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Drive Code Load Drive Spin Up Error"
	::= 136017014


mngmtAgentTrap_17015 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Drive Code Load - Complete"
	::= 136017015


mngmtAgentTrap_17016 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Drive Code Load Disk Group Migration In Progress"
	::= 136017016


mngmtAgentTrap_17017 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Drive Code Load Unable To Code Load Disks Part Of A Group "
	::= 136017017


mngmtAgentTrap_18001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Created Element Success"
	::= 136018001


mngmtAgentTrap_18002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Created Storage Success"
	::= 136018002


mngmtAgentTrap_18003 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Created Storage Client Success"
	::= 136018003


mngmtAgentTrap_18004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Set Storage Success"
	::= 136018004


mngmtAgentTrap_18005 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Set Element Success"
	::= 136018005


mngmtAgentTrap_18006 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Deleted Element Success"
	::= 136018006


mngmtAgentTrap_18007 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Deleted Storage Success"
	::= 136018007


mngmtAgentTrap_18008 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Deleted Storage Client Success"
	::= 136018008


mngmtAgentTrap_18009 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Created Snapshot Success	"
	::= 136018009


mngmtAgentTrap_18010 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Created Clone Success"
	::= 136018010


mngmtAgentTrap_18018 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Unable To Get The Lock"
	::= 136018018


mngmtAgentTrap_18019 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Created PresentedUnit Success"
	::= 136018019


mngmtAgentTrap_18022 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Create DiskGroup Success"
	::= 136018022


mngmtAgentTrap_18024 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Create Folder Success"
	::= 136018024


mngmtAgentTrap_18025 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Delete Folder Success"
	::= 136018025


mngmtAgentTrap_18028 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Set Folder Success"
	::= 136018028


mngmtAgentTrap_18034 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Invalid User Name Or Password Error"
	::= 136018034


mngmtAgentTrap_18036 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Delete Presented Unit Success"
	::= 136018036


mngmtAgentTrap_18038 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Set Diskgroup Success                         "
	::= 136018038


mngmtAgentTrap_18039 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Set Disk Success"
	::= 136018039


mngmtAgentTrap_18040 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Delete Storage Family Success "
	::= 136018040


mngmtAgentTrap_18041 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Set Storage Family Success"
	::= 136018041


mngmtAgentTrap_18042 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Control Memory Allocation Failure"
	::= 136018042


mngmtAgentTrap_18045 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Element Codeload Success   "
	::= 136018045


mngmtAgentTrap_18047 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Disk Codeload Success"
	::= 136018047


mngmtAgentTrap_18048 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Monitor Codeload Success"
	::= 136018048


mngmtAgentTrap_18049 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Added Port WWID Success"
	::= 136018049


mngmtAgentTrap_18050 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Set Storage Client Success"
	::= 136018050


mngmtAgentTrap_18051 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Invalid Operation"
	::= 136018051


mngmtAgentTrap_18052 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Deleted Port WWID Success"
	::= 136018052


mngmtAgentTrap_18059 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Set Power Success"
	::= 136018059


mngmtAgentTrap_18060 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Element Is Not Initialized"
	::= 136018060


mngmtAgentTrap_18063 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Error trying to delete a disk group"
	::= 136018063


mngmtAgentTrap_18065 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api A storage (Vdisk) operation is in progress. Try again later."
	::= 136018065


mngmtAgentTrap_18066 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api The storage (Vdisk) condition is invalid. The storage may be in error. Try again later."
	::= 136018066


mngmtAgentTrap_18067 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Error calling get Vdisk condition. Vdisk may be deleted. Try again later."
	::= 136018067


mngmtAgentTrap_18068 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Invalid initialization of the API. Cannot start monitoring process. Storage system management limited."
	::= 136018068


mngmtAgentTrap_18070 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api A command is currently under execution from another API call. Try again later."
	::= 136018070


mngmtAgentTrap_18071 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api The server has not completed initialization, cannot process the request."
	::= 136018071


mngmtAgentTrap_18073 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Removal of disk from disk group successful"
	::= 136018073


mngmtAgentTrap_18074 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Disk(s) added to disk group successfully"
	::= 136018074


mngmtAgentTrap_18075 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Modify monitor properties successful"
	::= 136018075


mngmtAgentTrap_18076 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api Element name too long. Maximum is 20 characters."
	::= 136018076


mngmtAgentTrap_18080 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api The snapshot/Snapclone license cannot be validated. Either the license key has not been entered, or there is a system communication failure."
	::= 136018080


mngmtAgentTrap_18081 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Api The folder operation is not valid for the specified folder. Either the folder is a root folder and cannot be modified, or it is a disk group folder for which you should use 'Set Group' command."
	::= 136018081


mngmtAgentTrap_20001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "LicMngr Memory Allocation Failure"
	::= 136020001


mngmtAgentTrap_20002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "LicMngr Startup Complete"
	::= 136020002


mngmtAgentTrap_20003 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "LicMngr Startup Failed"
	::= 136020003


mngmtAgentTrap_20004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "License successfully checked out"
	::= 136020004


mngmtAgentTrap_20005 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "License checkout failed"
	::= 136020005


mngmtAgentTrap_20011 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "License Line has an incorrect format"
	::= 136020011


mngmtAgentTrap_20013 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "License Library runtime error"
	::= 136020013


mngmtAgentTrap_20015 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Failed to retrieve Node WWN from storage system"
	::= 136020015


mngmtAgentTrap_20016 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Failed to retrieve license list from MLD"
	::= 136020016


mngmtAgentTrap_20017 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Failed to write license list to MLD"
	::= 136020017


mngmtAgentTrap_20018 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "This license line appears to be invalid"
	::= 136020018


mngmtAgentTrap_20019 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "MLD Manager Handle is NULL - unable to update MLD License List"
	::= 136020019


mngmtAgentTrap_20020 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "LicMngr: Storage system handle is NULL"
	::= 136020020


mngmtAgentTrap_20021 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The license you entered is a valid license but not for the Node WWN and/or firmware version on this controller pair"
	::= 136020021


mngmtAgentTrap_20022 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Function name string is null or in an incorrect format"
	::= 136020022


mngmtAgentTrap_20023 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Version string is null or in an incorrect format"
	::= 136020023


mngmtAgentTrap_21001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "HSV Upgrade Manager Image File Open Error"
	::= 136021001


mngmtAgentTrap_21002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "HSV Upgrade Manager Image File Buffer Allocation Error"
	::= 136021002


mngmtAgentTrap_21003 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "HSV Upgrade Manager Image File Read Error"
	::= 136021003


mngmtAgentTrap_21004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "HSV Upgrade Manager Event File Write Error"
	::= 136021004


mngmtAgentTrap_21006 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "HSV Upgrade Manager Global Header Edc Compute Error"
	::= 136021006


mngmtAgentTrap_21007 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "HSV Upgrade Manager Image Header Edc Compute Error"
	::= 136021007


mngmtAgentTrap_21008 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "HSV Upgrade Manager Image Type Exceeds Max Image Count"
	::= 136021008


mngmtAgentTrap_21009 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "HSV Upgrade Manager Image Type Not Controller Image"
	::= 136021009


mngmtAgentTrap_21010 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "HSV Upgrade Manager Image Size Exceeded"
	::= 136021010


mngmtAgentTrap_21011 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "HSV Upgrade Manager Event File Open Error"
	::= 136021011


mngmtAgentTrap_21012 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "HSV Upgrade Manager Image Edc Compute Error"
	::= 136021012


mngmtAgentTrap_21013 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "HSV Upgrade Manager Begin Text Not Found"
	::= 136021013


mngmtAgentTrap_21014 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "HSV Upgrade Manager After Text Not Found"
	::= 136021014


mngmtAgentTrap_21015 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "HSV Upgrade Manager File Format Version Mismatch"
	::= 136021015


mngmtAgentTrap_21016 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "HSV Upgrade Manager Global Header Format Version Mismatch"
	::= 136021016


mngmtAgentTrap_21017 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "HSV Upgrade Manager Product Information Was Not Found"
	::= 136021017


mngmtAgentTrap_21018 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "HSV Upgrade Manager Event File Was Not Found"
	::= 136021018


mngmtAgentTrap_21019 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "HSV Upgrade Manager All Images Match Versions Already Loaded"
	::= 136021019


mngmtAgentTrap_22001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Trace: Unable to write management agent trace file"
	::= 136022001


mngmtAgentTrap_22002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Trace: file write succeeded"
	::= 136022002


mngmtAgentTrap_23002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  MINOR

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Diagnostic The view list has errors"
	::= 136023002


mngmtAgentTrap_23003 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  CRITICAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Diagnostic Memory allocation failure"
	::= 136023003


mngmtAgentTrap_24001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Windows system error"
	::= 136024001


mngmtAgentTrap_24002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Lock is already taken"
	::= 136024002


mngmtAgentTrap_24003 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Lock is not taken"
	::= 136024003


mngmtAgentTrap_24004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Request timed out"
	::= 136024004


mngmtAgentTrap_25001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No path to controller"
	::= 136025001


mngmtAgentTrap_25002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Thread is not running"
	::= 136025002


mngmtAgentTrap_25003 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No physical stores"
	::= 136025003


mngmtAgentTrap_25004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Loop context ID changed"
	::= 136025004


mngmtAgentTrap_25005 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage Cell context ID changed"
	::= 136025005


mngmtAgentTrap_25006 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Cache Write Failure"
	::= 136025006


mngmtAgentTrap_25007 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Battery Disable Failure"
	::= 136025007


mngmtAgentTrap_25008 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Drive Shelf Disable Failure"
	::= 136025008


mngmtAgentTrap_25009 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Shutdown Both Restart And Power Off Requested"
	::= 136025009


mngmtAgentTrap_25010 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Shutdown Drive Shelf Power Off But No Enclosure Power Off Requested"
	::= 136025010


mngmtAgentTrap_25011 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Shutdown Disable Battery But No Enclosure Power Off Requested"
	::= 136025011


mngmtAgentTrap_25012 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Shutdown Disable Battery But Shutdown Unconditional Requested"
	::= 136025012


mngmtAgentTrap_25013 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Shutdown Delay Out Of Range"
	::= 136025013


mngmtAgentTrap_25014 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid Storage Cell name"
	::= 136025014


mngmtAgentTrap_25015 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Requested spares goal cannot be satisfied"
	::= 136025015


mngmtAgentTrap_25016 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "No valid LDAD found"
	::= 136025016


mngmtAgentTrap_25017 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Mismatched MLD size"
	::= 136025017


mngmtAgentTrap_25018 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Codeload image file error"
	::= 136025018


mngmtAgentTrap_25019 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Storage System is not initialized"
	::= 136025019


mngmtAgentTrap_26002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Invalid data replication operation"
	::= 136026002


mngmtAgentTrap_26005 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "DR group name exceeds maximum length"
	::= 136026005


mngmtAgentTrap_26006 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "DR group created successfully"
	::= 136026006


mngmtAgentTrap_26007 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Data replication invalid mode for DR Group create "
	::= 136026007


mngmtAgentTrap_26008 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "A duplicate DR group name exists in the specified source or destination DR group."
	::= 136026008


mngmtAgentTrap_26009 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Data replication invalid operation while DR Groups exist"
	::= 136026009


mngmtAgentTrap_26010 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Data replication root folder does not exist"
	::= 136026010


mngmtAgentTrap_26011 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "DR group discarded"
	::= 136026011


mngmtAgentTrap_26012 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Data replication unknown remote storage system"
	::= 136026012


mngmtAgentTrap_26013 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Data replication Error. A conflicting Vdisk name exists on the remote storage system."
	::= 136026013


mngmtAgentTrap_26014 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Data Replication Error. Invalid Remote Vdisk Name specified."
	::= 136026014


mngmtAgentTrap_26015 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Data Replication Error. Remote Vdisk size cannot be modified."
	::= 136026015


mngmtAgentTrap_26016 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "Data Replication Error. Remote Vdisk should be unpresented to proceed with the discard/detach operation."
	::= 136026016


mngmtAgentTrap_27001 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully initialized storage system. Command issued through XML Interface."
	::= 136027001


mngmtAgentTrap_27002 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully created a virtual disk. Command issued through the XML Interface."
	::= 136027002


mngmtAgentTrap_27003 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully created a disk group. Command issued through the XML Interface."
	::= 136027003


mngmtAgentTrap_27004 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully created a DRM group. Command issued through the XML Interface."
	::= 136027004


mngmtAgentTrap_27005 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully created a host. Command issued through the XML Interface."
	::= 136027005


mngmtAgentTrap_27006 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully created a presented unit. Command issued through the XML Interface."
	::= 136027006


mngmtAgentTrap_27007 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully created a virtual disk folder. Command issued through the XML Interface."
	::= 136027007


mngmtAgentTrap_27008 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully created a host folder. Command issued through the XML Interface."
	::= 136027008


mngmtAgentTrap_27009 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully created a disk group folder. Command issued through the XML Interface."
	::= 136027009


mngmtAgentTrap_27010 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully created a DRM group folder. Command issued through the XML Interface."
	::= 136027010


mngmtAgentTrap_27011 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully created a folder. Command issued through the XML Interface."
	::= 136027011


mngmtAgentTrap_27012 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully created a snapshot. Command issued through the XML Interface."
	::= 136027012


mngmtAgentTrap_27013 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully created a snapclone. Command issued through the XML Interface."
	::= 136027013


mngmtAgentTrap_27014 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully uninitialized the storage system. Command issued through the XML Interface."
	::= 136027014


mngmtAgentTrap_27015 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully deleted a virtual disk. Command issued through the XML Interface."
	::= 136027015


mngmtAgentTrap_27016 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully deleted a disk group. Command issued through the XML Interface."
	::= 136027016


mngmtAgentTrap_27017 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully deleted a DRM group. Command issued through the XML Interface."
	::= 136027017


mngmtAgentTrap_27018 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully deleted a host. Command issued through the XML Interface."
	::= 136027018


mngmtAgentTrap_27019 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully deleted a presented unit. Command issued through the XML Interface."
	::= 136027019


mngmtAgentTrap_27020 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully deleted a virtual disk folder. Command issued through the XML Interface."
	::= 136027020


mngmtAgentTrap_27021 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully deleted a host folder. Command issued through the XML Interface."
	::= 136027021


mngmtAgentTrap_27022 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully deleted a disk group folder. Command issued through the XML Interface."
	::= 136027022


mngmtAgentTrap_27023 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully deleted a DRM group folder. Command issued through the XML Interface."
	::= 136027023


mngmtAgentTrap_27024 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully deleted a folder. Command issued through the XML Interface."
	::= 136027024


mngmtAgentTrap_27025 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully deleted a snapshot. Command issued through the XML Interface."
	::= 136027025


mngmtAgentTrap_27026 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully modified the properties of a storage system. Command issued through the XML Interface."
	::= 136027026


mngmtAgentTrap_27027 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully modified the properties of a virtual disk. Command issued through the XML Interface."
	::= 136027027


mngmtAgentTrap_27028 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully modified the properties of a disk group. Command issued through the XML Interface."
	::= 136027028


mngmtAgentTrap_27029 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully modified the properties of a DRM group. Command issued through the XML Interface."
	::= 136027029


mngmtAgentTrap_27030 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully modified the properties of a host. Command issued through the XML Interface."
	::= 136027030


mngmtAgentTrap_27031 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully modified the properties of a presented unit. Command issued through the XML Interface."
	::= 136027031


mngmtAgentTrap_27032 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully modified the properties of a virtual disk folder. Command issued through the XML Interface."
	::= 136027032


mngmtAgentTrap_27033 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully modified the properties of a host folder. Command issued through the XML Interface."
	::= 136027033


mngmtAgentTrap_27034 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully modified the properties of a hardware root folder. Command issued through the XML Interface."
	::= 136027034


mngmtAgentTrap_27035 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully modified the properties of a disk group folder. Command issued through the XML Interface."
	::= 136027035


mngmtAgentTrap_27036 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully modified the properties of a DRM group folder. Command issued through the XML Interface."
	::= 136027036


mngmtAgentTrap_27037 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully modified the properties of a DRM group root folder. Command issued through the XML Interface."
	::= 136027037


mngmtAgentTrap_27038 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully modified the properties of a folder. Command issued through the XML Interface."
	::= 136027038


mngmtAgentTrap_27039 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully modified the properties of a snapshot. Command issued through the XML Interface."
	::= 136027039


mngmtAgentTrap_27040 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully modified the properties of a disk. Command issued through the XML Interface."
	::= 136027040


mngmtAgentTrap_27041 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully modified the properties of a disk shelf. Command issued through the XML Interface."
	::= 136027041


mngmtAgentTrap_27042 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully modified the properties of a controller. Command issued through the XML Interface."
	::= 136027042


mngmtAgentTrap_27043 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully modified the properties of a controller shelf. Command issued through the XML Interface."
	::= 136027043


mngmtAgentTrap_27044 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully modified the properties of a cabinet. Command issued through the XML Interface."
	::= 136027044


mngmtAgentTrap_27045 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully reserved an object. Command issued through the XML Interface."
	::= 136027045


mngmtAgentTrap_27046 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "The element manager has successfully released an object. Command issued through the XML Interface."
	::= 136027046


mngmtAgentTrap_27047 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "XML cache mutex timeout."
	::= 136027047


mngmtAgentTrap_27048 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "XML cache memory allocation error."
	::= 136027048


mngmtAgentTrap_27049 TRAP-TYPE
	ENTERPRISE compaq
	VARIABLES { hostName, scellNameDateTime, agentEventCode, agentEventDescription }

	--#TYPE      "Management Agent Event"

	--#SUMMARY   "Host %s : SCellNameTimeDate %s : EventCode %d : Description %s"

	--#MSG_FORMATTER "$V3V#Event Code: #"

	--#SEVERITY  INFORMATIONAL

	--#CATEGORY "HP StorageWorks HSV Controller Events"
DESCRIPTION "XML subsystem unknown error."
	::= 136027049


END