#-MIBFILE: cisco-cdp.mib CISCO-CDP-MIB DEFINITIONS ::= BEGIN DisplayString ::= OCTET STRING (SIZE(0..255)) PhysAddress ::= OCTET STRING MacAddress ::= OCTET STRING (SIZE(6)) TruthValue ::= INTEGER { true(1), false(2) } TestAndIncr ::= INTEGER (0..2147483647) AutonomousType ::= OBJECT IDENTIFIER InstancePointer ::= OBJECT IDENTIFIER VariablePointer ::= OBJECT IDENTIFIER RowPointer ::= OBJECT IDENTIFIER RowStatus ::= INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } TimeStamp ::= TimeTicks TimeInterval ::= INTEGER (0..2147483647) DateAndTime ::= OCTET STRING (SIZE(8|11)) StorageType ::= INTEGER { other(1), volatile(2), nonVolatile(3), permanent(4), readOnly(5) } TDomain ::= OBJECT IDENTIFIER TAddress ::= OCTET STRING (SIZE(1..255)) cisco OBJECT IDENTIFIER ::= { enterprises 9 } ciscoMgmt OBJECT IDENTIFIER ::= { cisco 9 } CiscoNetworkProtocol ::= INTEGER { ip(1), decnet(2), pup(3), chaos(4), xns(5), x121(6), appletalk(7), clns(8), lat(9), vines(10), cons(11), apollo(12), stun(13), novell(14), qllc(15), snapshot(16), atmIlmi(17), bstun(18), x25pvc(19), ipv6(20), cdm(21), nbf(22), bpxIgx(23), clnsPfx(24), http(25), unknown(65535) } CiscoNetworkAddress ::= OCTET STRING Unsigned64 ::= OCTET STRING InterfaceIndexOrZero ::= INTEGER (0..2147483647) SAPType ::= INTEGER (0..254) CountryCode ::= OCTET STRING (SIZE(0|2)) CountryCodeITU ::= OCTET STRING EntPhysicalIndexOrZero ::= INTEGER (0..2147483647) CiscoRowOperStatus ::= INTEGER { active(1), activeDependencies(2), inactiveDependency(3), missingDependency(4) } CiscoPort ::= INTEGER (0..65535) CiscoIpProtocol ::= INTEGER (0..255) CiscoLocationClass ::= INTEGER { chassis(1), shelf(2), slot(3), subSlot(4), port(5), subPort(6), channel(7), subChannel(8) } CiscoLocationSpecifier ::= OCTET STRING (SIZE(0..255)) CiscoInetAddressMask ::= OCTET STRING CiscoAbsZeroBasedCounter32 ::= Gauge CiscoSnapShotAbsCounter32 ::= OCTET STRING CiscoAlarmSeverity ::= INTEGER { cleared(1), indeterminate(2), critical(3), major(4), minor(5), warning(6), info(7) } PerfHighIntervalCount ::= OCTET STRING ConfigIterator ::= OCTET STRING BulkConfigResult ::= OCTET STRING (SIZE(0..255)) ListIndex ::= INTEGER (1..2147483647) ListIndexOrZero ::= INTEGER (0..2147483647) TimeIntervalSec ::= OCTET STRING TimeIntervalMin ::= OCTET STRING CiscoMilliSeconds ::= OCTET STRING MicroSeconds ::= OCTET STRING CiscoPortList ::= OCTET STRING (SIZE(0..256)) CiscoPortListRange ::= INTEGER { oneto2k(1), twoKto4K(2), fourKto6K(3), sixKto8K(4), eightKto10K(5), tenKto12K(6), twelveKto14K(7), fourteenKto16K(8) } IfOperStatusReason ::= INTEGER { other(1), none(2), hwFailure(3), loopbackDiagFailure(4), errorDisabled(5), swFailure(6), linkFailure(7), offline(8), nonParticipating(9), initializing(10), vsanInactive(11), adminDown(12), channelAdminDown(13), channelOperSuspended(14), channelConfigurationInProgress(15), rcfInProgress(16), elpFailureIsolation(17), escFailureIsolation(18), domainOverlapIsolation(19), domainAddrAssignFailureIsolation(20), domainOtherSideEportIsolation(21), domainInvalidRcfReceived(22), domainManagerDisabled(23), zoneMergeFailureIsolation(24), vsanMismatchIsolation(25), parentDown(26), srcPortNotBound(27), interfaceRemoved(28), fcotNotPresent(29), fcotVendorNotSupported(30), incompatibleAdminMode(31), incompatibleAdminSpeed(32), suspendedByMode(33), suspendedBySpeed(34), suspendedByWWN(35), domainMaxReTxFailure(36), eppFailure(37), portVsanMismatchIsolation(38), loopbackIsolation(39), upgradeInProgress(40), incompatibleAdminRxBbCredit(41), incompatibleAdminRxBufferSize(42), portChannelMembersDown(43), zoneRemoteNoRespIsolation(44), firstPortUpAsEport(45), firstPortNotUp(46), peerFCIPPortClosedConnection(47), peerFCIPPortResetConnection(48), fcipPortMaxReTx(49), fcipPortKeepAliveTimerExpire(50), fcipPortPersistTimerExpire(51), fcipPortSrcLinkDown(52), fcipPortSrcAdminDown(53), fcipPortAdminCfgChange(54), fcipSrcPortRemoved(55), fcipSrcModuleNotOnline(56), invalidConfig(57), portBindFailure(58), portFabricBindFailure(59), noCommonVsanIsolation(60), ficonVsanDown(61), invalidAttachment(62), portBlocked(63), incomAdminRxBbCreditPerBuf(64), tooManyInvalidFlogis(65), deniedDueToPortBinding(66), elpFailureRevMismatch(67), elpFailureClassFParamErr(68), elpFailureClassNParamErr(69), elpFailureUnknownFlowCtlCode(70), elpFailureInvalidFlowCtlParam(71), elpFailureInvalidPortName(72), elpFailureInvalidSwitchName(73), elpFailureRatovEdtovMismatch(74), elpFailureLoopbackDetected(75), elpFailureInvalidTxBbCredit(76), elpFailureInvalidPayloadSize(77), bundleMisCfg(78), bitErrRuntimeThreshExceeded(79), linkFailLinkReset(80), linkFailPortInitFail(81), linkFailPortUnusable(82), linkFailLossOfSignal(83), linkFailLossOfSync(84), linkFailNosRcvd(85), linkFailOlsRcvd(86), linkFailDebounceTimeout(87), linkFailLrRcvd(88), linkFailCreditLoss(89), linkFailRxQOverflow(90), linkFailTooManyInterrupts(91), linkFailLipRcvdBb(92), linkFailBbCreditLoss(93), linkFailOpenPrimSignalTimeout(94), linkFailOpenPrimSignalReturned(95), linkFailLipF8Rcvd(96), linkFailLineCardPortShutdown(97), fcspAuthenfailure(98), fcotChecksumError(99), ohmsExtLoopbackTest(100), invalidFabricBindExchange(101), tovMismatch(102), ficonNotEnabled(103), ficonNoPortNumber(104), ficonBeingEnabled(105), ePortProhibited(106), portGracefulShutdown(107), trunkNotFullyActive(108), fabricBindingSwitchWwnNotFound(109), fabricBindingDomainInvalid(110), fabricBindingDbMismatch(111), fabricBindingNoRspFromPeer(112), dpvmVsanSuspended(113), dpvmVsanNotFound(114), trackedPortDown(115), ecSuspendedOnLoop(116), isolateBundleMisCfg(117), noPeerBundleSupport(118), portBringupIsolation(119), domainNotAllowedIsolated(120), virtualIvrDomainOverlapIsolation(121), outOfService(122), portAuthFailed(123), bundleStandby(124), portConnectorTypeErr(125), errorDisabledReInitLmtReached(126), ficonDupPortNum(127), localRcf(128), twoSwitchesWithSameWWN(129), invalidOtherSidePrincEFPReqRecd(130), domainOther(131) } EntLogicalIndexOrZero ::= INTEGER (0..2147483647) CiscoURLString ::= OCTET STRING (SIZE(1..255)) CiscoHTTPResponseStatusCode ::= OCTET STRING CvE164Address ::= OCTET STRING (SIZE(1..128)) VlanIndex ::= INTEGER (0..4095) ManagementDomainIndex ::= INTEGER (1..255) VlanType ::= INTEGER { ethernet(1), fddi(2), tokenRing(3), fddiNet(4), trNet(5), deprecated(6) } VlanTypeExt ::= OCTET STRING { vtpmanageable(0), internal(1), reserved(2), rspan(3), dynamicGvrp(4) } OwnerString ::= OCTET STRING (SIZE(0..255)) InterfaceIndex ::= INTEGER (1..2147483647) mib-2 OBJECT IDENTIFIER ::= { mgmt 1 } interfaces OBJECT IDENTIFIER ::= { mib-2 2 } ifTable OBJECT IDENTIFIER ::= { interfaces 2 } ifEntry OBJECT IDENTIFIER ::= { ifTable 1 } ifIndex OBJECT IDENTIFIER ::= { ifEntry 1 } ciscoCdpMIB OBJECT IDENTIFIER ::= { ciscoMgmt 23 } ciscoCdpMIBObjects OBJECT IDENTIFIER ::= { ciscoCdpMIB 1 } cdpInterface OBJECT IDENTIFIER ::= { ciscoCdpMIBObjects 1 } cdpCache OBJECT IDENTIFIER ::= { ciscoCdpMIBObjects 2 } cdpGlobal OBJECT IDENTIFIER ::= { ciscoCdpMIBObjects 3 } cdpInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF CdpInterfaceEntry ACCESS read-only STATUS mandatory DESCRIPTION "The (conceptual) table containing the status of CDP on the device's interfaces." ::= { cdpInterface 1 } cdpInterfaceEntry OBJECT-TYPE SYNTAX CdpInterfaceEntry ACCESS read-only STATUS mandatory DESCRIPTION "An entry (conceptual row) in the cdpInterfaceTable, containing the status of CDP on an interface." INDEX { cdpInterfaceIfIndex } ::= { cdpInterfaceTable 1 } cdpInterfaceEntry ::= SEQUENCE { cdpInterfaceIfIndex Integer32, cdpInterfaceEnable TruthValue, cdpInterfaceMessageInterval INTEGER, cdpInterfaceGroup Integer32, cdpInterfacePort Integer32 } cdpInterfaceIfIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex value of the local interface. For 802.3 Repeaters on which the repeater ports do not have ifIndex values assigned, this value is a unique value for the port, and greater than any ifIndex value supported by the repeater; in this case, the specific port is indicated by corresponding values of cdpInterfaceGroup and cdpInterfacePort, where these values correspond to the group number and port number values of RFC 1516." ::= { cdpInterfaceEntry 1 } cdpInterfaceEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "An indication of whether the Cisco Discovery Protocol is currently running on this interface. This variable has no effect when CDP is disabled (cdpGlobalRun = FALSE)." ::= { cdpInterfaceEntry 2 } cdpInterfaceMessageInterval OBJECT-TYPE SYNTAX INTEGER (5..254) ACCESS read-only STATUS obsolete DESCRIPTION "The interval at which CDP messages are to be generated on this interface. The default value is 60 seconds." ::= { cdpInterfaceEntry 3 } cdpInterfaceGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is only relevant to interfaces which are repeater ports on 802.3 repeaters. In this situation, it indicates the RFC1516 group number of the repeater port which corresponds to this interface." ::= { cdpInterfaceEntry 4 } cdpInterfacePort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object is only relevant to interfaces which are repeater ports on 802.3 repeaters. In this situation, it indicates the RFC1516 port number of the repeater port which corresponds to this interface." ::= { cdpInterfaceEntry 5 } cdpInterfaceExtTable OBJECT-TYPE SYNTAX SEQUENCE OF CdpInterfaceExtEntry ACCESS read-only STATUS mandatory DESCRIPTION "This table contains the additional CDP configuration on the device's interfaces." ::= { cdpInterface 2 } cdpInterfaceExtEntry OBJECT-TYPE SYNTAX CdpInterfaceExtEntry ACCESS read-only STATUS mandatory DESCRIPTION "An entry in the cdpInterfaceExtTable contains the values configured for Extented Trust TLV and COS (Class of Service) for Untrusted Ports TLV on an interface which supports the sending of these TLVs." INDEX { ifIndex } ::= { cdpInterfaceExtTable 1 } cdpInterfaceExtEntry ::= SEQUENCE { cdpInterfaceExtendedTrust INTEGER, cdpInterfaceCosForUntrustedPort Unsigned32 } cdpInterfaceExtendedTrust OBJECT-TYPE SYNTAX INTEGER { trusted(1), noTrust(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the value to be sent by Extended Trust TLV. If trusted(1) is configured, the value of Extended Trust TLV is one byte in length with its least significant bit equal to 1 to indicate extended trust. All other bits are 0. If noTrust(2) is configured, the value of Extended Trust TLV is one byte in length with its least significant bit equal to 0 to indicate no extended trust. All other bits are 0." ::= { cdpInterfaceExtEntry 1 } cdpInterfaceCosForUntrustedPort OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the value to be sent by COS for Untrusted Ports TLV." ::= { cdpInterfaceExtEntry 2 } cdpCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF CdpCacheEntry ACCESS read-only STATUS mandatory DESCRIPTION "The (conceptual) table containing the cached information obtained via receiving CDP messages." ::= { cdpCache 1 } cdpCacheEntry OBJECT-TYPE SYNTAX CdpCacheEntry ACCESS read-only STATUS mandatory DESCRIPTION "An entry (conceptual row) in the cdpCacheTable, containing the information received via CDP on one interface from one device. Entries appear when a CDP advertisement is received from a neighbor device. Entries disappear when CDP is disabled on the interface, or globally." INDEX { cdpCacheIfIndex , cdpCacheDeviceIndex } ::= { cdpCacheTable 1 } cdpCacheEntry ::= SEQUENCE { cdpCacheIfIndex Integer32, cdpCacheDeviceIndex Integer32, cdpCacheAddressType CiscoNetworkProtocol, cdpCacheAddress CiscoNetworkAddress, cdpCacheVersion DisplayString, cdpCacheDeviceId DisplayString, cdpCacheDevicePort DisplayString, cdpCachePlatform DisplayString, cdpCacheCapabilities OCTET STRING, cdpCacheVTPMgmtDomain DisplayString, cdpCacheNativeVLAN VlanIndex, cdpCacheDuplex INTEGER, cdpCacheApplianceID Unsigned32, cdpCacheVlanID Unsigned32, cdpCachePowerConsumption Unsigned32, cdpCacheMTU Unsigned32, cdpCacheSysName DisplayString, cdpCacheSysObjectID OBJECT IDENTIFIER, cdpCachePrimaryMgmtAddrType CiscoNetworkProtocol, cdpCachePrimaryMgmtAddr CiscoNetworkAddress, cdpCacheSecondaryMgmtAddrType CiscoNetworkProtocol, cdpCacheSecondaryMgmtAddr CiscoNetworkAddress, cdpCachePhysLocation DisplayString, cdpCacheLastChange TimeStamp } cdpCacheIfIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Normally, the ifIndex value of the local interface. For 802.3 Repeaters for which the repeater ports do not have ifIndex values assigned, this value is a unique value for the port, and greater than any ifIndex value supported by the repeater; the specific port number in this case, is given by the corresponding value of cdpInterfacePort." ::= { cdpCacheEntry 1 } cdpCacheDeviceIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each device from which CDP messages are being received." ::= { cdpCacheEntry 2 } cdpCacheAddressType OBJECT-TYPE SYNTAX CiscoNetworkProtocol ACCESS read-only STATUS mandatory DESCRIPTION "An indication of the type of address contained in the corresponding instance of cdpCacheAddress." ::= { cdpCacheEntry 3 } cdpCacheAddress OBJECT-TYPE SYNTAX CiscoNetworkAddress ACCESS read-only STATUS mandatory DESCRIPTION "The (first) network-layer address of the device's SNMP-agent as reported in the Address TLV of the most recently received CDP message. For example, if the corresponding instance of cacheAddressType had the value 'ip(1)', then this object would be an IP-address." ::= { cdpCacheEntry 4 } cdpCacheVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The Version string as reported in the most recent CDP message. The zero-length string indicates no Version field (TLV) was reported in the most recent CDP message." ::= { cdpCacheEntry 5 } cdpCacheDeviceId OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The Device-ID string as reported in the most recent CDP message. The zero-length string indicates no Device-ID field (TLV) was reported in the most recent CDP message." ::= { cdpCacheEntry 6 } cdpCacheDevicePort OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The Port-ID string as reported in the most recent CDP message. This will typically be the value of the ifName object (e.g., 'Ethernet0'). The zero-length string indicates no Port-ID field (TLV) was reported in the most recent CDP message." ::= { cdpCacheEntry 7 } cdpCachePlatform OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The Device's Hardware Platform as reported in the most recent CDP message. The zero-length string indicates that no Platform field (TLV) was reported in the most recent CDP message." ::= { cdpCacheEntry 8 } cdpCacheCapabilities OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "The Device's Functional Capabilities as reported in the most recent CDP message. For latest set of specific values, see the latest version of the CDP specification. The zero-length string indicates no Capabilities field (TLV) was reported in the most recent CDP message." ::= { cdpCacheEntry 9 } cdpCacheVTPMgmtDomain OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The VTP Management Domain for the remote device's interface, as reported in the most recently received CDP message. This object is not instantiated if no VTP Management Domain field (TLV) was reported in the most recently received CDP message." ::= { cdpCacheEntry 10 } cdpCacheNativeVLAN OBJECT-TYPE SYNTAX VlanIndex ACCESS read-only STATUS mandatory DESCRIPTION "The remote device's interface's native VLAN, as reported in the most recent CDP message. The value 0 indicates no native VLAN field (TLV) was reported in the most recent CDP message." ::= { cdpCacheEntry 11 } cdpCacheDuplex OBJECT-TYPE SYNTAX INTEGER { unknown(1), halfduplex(2), fullduplex(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The remote device's interface's duplex mode, as reported in the most recent CDP message. The value unknown(1) indicates no duplex mode field (TLV) was reported in the most recent CDP message." ::= { cdpCacheEntry 12 } cdpCacheApplianceID OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The remote device's Appliance ID, as reported in the most recent CDP message. This object is not instantiated if no Appliance VLAN-ID field (TLV) was reported in the most recently received CDP message." ::= { cdpCacheEntry 13 } cdpCacheVlanID OBJECT-TYPE SYNTAX INTEGER (0..4095) ACCESS read-only STATUS mandatory DESCRIPTION "The remote device's VoIP VLAN ID, as reported in the most recent CDP message. This object is not instantiated if no Appliance VLAN-ID field (TLV) was reported in the most recently received CDP message." ::= { cdpCacheEntry 14 } cdpCachePowerConsumption OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of power consumed by remote device, as reported in the most recent CDP message. This object is not instantiated if no Power Consumption field (TLV) was reported in the most recently received CDP message." ::= { cdpCacheEntry 15 } cdpCacheMTU OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the size of the largest datagram that can be sent/received by remote device, as reported in the most recent CDP message. This object is not instantiated if no MTU field (TLV) was reported in the most recently received CDP message." ::= { cdpCacheEntry 16 } cdpCacheSysName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the value of the remote device's sysName MIB object. By convention, it is the device's fully qualified domain name. This object is not instantiated if no sysName field (TLV) was reported in the most recently received CDP message." ::= { cdpCacheEntry 17 } cdpCacheSysObjectID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the value of the remote device's sysObjectID MIB object. This object is not instantiated if no sysObjectID field (TLV) was reported in the most recently received CDP message." ::= { cdpCacheEntry 18 } cdpCachePrimaryMgmtAddrType OBJECT-TYPE SYNTAX CiscoNetworkProtocol ACCESS read-only STATUS mandatory DESCRIPTION "An indication of the type of address contained in the corresponding instance of cdpCachePrimaryMgmtAddress." ::= { cdpCacheEntry 19 } cdpCachePrimaryMgmtAddr OBJECT-TYPE SYNTAX CiscoNetworkAddress ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the (first) network layer address at which the device will accept SNMP messages as reported in the most recently received CDP message. If the corresponding instance of cdpCachePrimaryMgmtAddrType has the value 'ip(1)', then this object would be an IP-address. If the remote device is not currently manageable via any network protocol, this object has the special value of the IPv4 address 0.0.0.0. If the most recently received CDP message did not contain any primary address at which the device prefers to receive SNMP messages, then this object is not instanstiated." ::= { cdpCacheEntry 20 } cdpCacheSecondaryMgmtAddrType OBJECT-TYPE SYNTAX CiscoNetworkProtocol ACCESS read-only STATUS mandatory DESCRIPTION "An indication of the type of address contained in the corresponding instance of cdpCacheSecondaryMgmtAddress." ::= { cdpCacheEntry 21 } cdpCacheSecondaryMgmtAddr OBJECT-TYPE SYNTAX CiscoNetworkAddress ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the alternate network layer address (other than the one indicated by cdpCachePrimaryMgmtAddr) at which the device will accept SNMP messages as reported in the most recently received CDP message. If the corresponding instance of cdpCacheSecondaryMgmtAddrType has the value 'ip(1)', then this object would be an IP-address. If the most recently received CDP message did not contain such an alternate network layer address, then this object is not instanstiated." ::= { cdpCacheEntry 22 } cdpCachePhysLocation OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the physical location, as reported by the most recent CDP message, of a connector which is on, or physically connected to, the remote device's interface over which the CDP packet is sent. This object is not instantiated if no Physical Location field (TLV) was reported by the most recently received CDP message." ::= { cdpCacheEntry 23 } cdpCacheLastChange OBJECT-TYPE SYNTAX TimeStamp ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the time when this cache entry was last changed. This object is initialised to the current time when the entry gets created and updated to the current time whenever the value of any (other) object instance in the corresponding row is modified." ::= { cdpCacheEntry 24 } cdpGlobalRun OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "An indication of whether the Cisco Discovery Protocol is currently running. Entries in cdpCacheTable are deleted when CDP is disabled." ::= { cdpGlobal 1 } cdpGlobalMessageInterval OBJECT-TYPE SYNTAX INTEGER (5..254) ACCESS read-only STATUS mandatory DESCRIPTION "The interval at which CDP messages are to be generated. The default value is 60 seconds." ::= { cdpGlobal 2 } cdpGlobalHoldTime OBJECT-TYPE SYNTAX INTEGER (10..255) ACCESS read-only STATUS mandatory DESCRIPTION "The time for the receiving device holds CDP message. The default value is 180 seconds." ::= { cdpGlobal 3 } cdpGlobalDeviceId OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The device ID advertised by this device. The format of this device id is characterized by the value of cdpGlobalDeviceIdFormat object." ::= { cdpGlobal 4 } cdpGlobalLastChange OBJECT-TYPE SYNTAX TimeStamp ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the time when the cache table was last changed. It is the most recent time at which any row was last created, modified or deleted." ::= { cdpGlobal 5 } cdpGlobalDeviceIdFormatCpb OBJECT-TYPE SYNTAX OCTET STRING { serialNumber(0), macAddress(1), other(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicate the Device-Id format capability of the device. serialNumber(0) indicates that the device supports using serial number as the format for its DeviceId. macAddress(1) indicates that the device supports using layer 2 MAC address as the format for its DeviceId. other(2) indicates that the device supports using its platform specific format as the format for its DeviceId." ::= { cdpGlobal 6 } cdpGlobalDeviceIdFormat OBJECT-TYPE SYNTAX INTEGER { serialNumber(1), macAddress(2), other(3) } ACCESS read-only STATUS mandatory DESCRIPTION "An indication of the format of Device-Id contained in the corresponding instance of cdpGlobalDeviceId. User can only specify the formats that the device is capable of as denoted in cdpGlobalDeviceIdFormatCpb object. serialNumber(1) indicates that the value of cdpGlobalDeviceId object is in the form of an ASCII string contain the device serial number. macAddress(2) indicates that the value of cdpGlobalDeviceId object is in the form of Layer 2 MAC address. other(3) indicates that the value of cdpGlobalDeviceId object is in the form of a platform specific ASCII string contain info that identifies the device. For example: ASCII string contains serialNumber appended/prepened with system name." ::= { cdpGlobal 7 } ciscoCdpMIBConformance OBJECT IDENTIFIER ::= { ciscoCdpMIB 2 } ciscoCdpMIBCompliances OBJECT IDENTIFIER ::= { ciscoCdpMIBConformance 1 } ciscoCdpMIBGroups OBJECT IDENTIFIER ::= { ciscoCdpMIBConformance 2 } ciscoCdpMIBGroup OBJECT IDENTIFIER ::= { ciscoCdpMIBGroups 1 } ciscoCdpMIBGroupV11R01 OBJECT IDENTIFIER ::= { ciscoCdpMIBGroups 2 } ciscoCdpMIBGroupV11R02 OBJECT IDENTIFIER ::= { ciscoCdpMIBGroups 3 } ciscoCdpMIBGroupV12R02 OBJECT IDENTIFIER ::= { ciscoCdpMIBGroups 5 } ciscoCdpV2MIBGroup OBJECT IDENTIFIER ::= { ciscoCdpMIBGroups 6 } ciscoCdpV2IfExtGroup OBJECT IDENTIFIER ::= { ciscoCdpMIBGroups 7 } END