-- *************************************************************************** -- -- Name: Web Configuration Management MIB -- -- This MIB is meant to be generic enough to fit the web configuration of -- any wireless LAN family product. -- -- WEB Configuration Mangement MIB is for 3Com Wireless LAN products. -- This MIB contains management objects for WEB configuration. -- It will be useful to third parties. -- -- Also, the users can configure those managed objects thourgh the web. -- -- History -- Date Who Reason for Change -- 09/06/2001 Yuli Initial Draft -- -- *************************************************************************** -- Copyright 3Com Technologies Limited. ( 2001 ) SRAP-WCM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress, Counter32, Integer32, Gauge32 FROM SNMPv2-SMI OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF MacAddress FROM SNMPv2-TC ifIndex FROM RFC1213-MIB a3Com FROM A3Com-products-MIB srAPWCM, srAPModules FROM SRAP-GLOBAL-REG; srAPWCMMIBModule MODULE-IDENTITY LAST-UPDATED "9905260000Z" ORGANIZATION "3Com" CONTACT-INFO " Name: Yuli Hou Mail Stop: 4240 Address: 5400 Bayfront Plaza Zip: CA 95052 City: Santa Clara, Country: USA Phone: +001-408-326-1191 Fax: +001-408-326-6555 e-mail: Yuli_Hou@3com.com" DESCRIPTION "The 3COM Wireless LAN Products Web Configuration Management MIB Module." ::= { srAPModules 5 } -- the group containing general SNMP objects wcmMIB OBJECT IDENTIFIER ::= { srAPWCM 1 } -- conformance and compliance specifications wcmConf OBJECT IDENTIFIER ::= { wcmMIB 1 } apConfigMgmtGroups OBJECT IDENTIFIER ::= { wcmConf 1 } apPerformMgmtGroups OBJECT IDENTIFIER ::= { wcmConf 2 } apFaultMgmtGroups OBJECT IDENTIFIER ::= { wcmConf 3 } apSecurityMgmtGroups OBJECT IDENTIFIER ::= { wcmConf 4 } apEventGroups OBJECT IDENTIFIER ::= { wcmConf 5 } -- the tree for managed objects wcmObjs OBJECT IDENTIFIER ::= { wcmMIB 2 } -- the subtree for config managed objects apConfigMgmt OBJECT IDENTIFIER ::= { wcmObjs 1 } apManufactureInfo OBJECT IDENTIFIER ::= { apConfigMgmt 1 } apSystemConfig OBJECT IDENTIFIER ::= { apConfigMgmt 2 } apSNMPInfo OBJECT IDENTIFIER ::= { apConfigMgmt 3 } apRFConfig OBJECT IDENTIFIER ::= { apConfigMgmt 4 } -- the subtree for perform managed objects apPerformMgmt OBJECT IDENTIFIER ::= { wcmObjs 2 } --apEthernetStatistics OBJECT IDENTIFIER ::= { apPerformMgmt 1 } apRFStatistics OBJECT IDENTIFIER ::= { apPerformMgmt 1 } apEtherItfStat OBJECT IDENTIFIER ::= { apPerformMgmt 2 } apRFItfStat OBJECT IDENTIFIER ::= { apPerformMgmt 3 } apTrafficMatrix OBJECT IDENTIFIER ::= { apPerformMgmt 4 } -- the subtree for Fault managed objects apFaultMgmt OBJECT IDENTIFIER ::= { wcmObjs 3 } -- the subtree for Security managed objects apSecurityMgmt OBJECT IDENTIFIER ::= { wcmObjs 4 } -- subtree for events and notifications wcmEvents OBJECT IDENTIFIER ::= { wcmMIB 3 } wcmEventsV2 OBJECT IDENTIFIER ::= { wcmEvents 0 } -- -- ACCESS Point Configuration Management (1) -- -- -- ACCESS Point Manufacturer Information Group (1.1) -- -- This group specifies the manufacturer information on the ACCESS -- Point for identification only. These data may not be altered by -- users. -- apModelnumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Model Number of the ACCESS Point device." ::= { apManufactureInfo 1 } apSerialnumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Serial Number of the ACCESS Point system." ::= { apManufactureInfo 2 } apMyMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the ACCESS Point." ::= { apManufactureInfo 3 } apFirmwareVer OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The current version of the ACCESS Point firmware." ::= { apManufactureInfo 4 } apWebUiVer OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The current version of the ACCESS Point WEB Configration System." ::= { apManufactureInfo 5 } apMfgDate OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Date of this ACCESS Point was manufactured." ::= { apManufactureInfo 6 } apProductName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Product Name of this ACCESS Point." ::= { apManufactureInfo 7 } apMfgName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Manufacture Name of this ACCESS Point." ::= { apManufactureInfo 8 } apHardwareRev OBJECT-TYPE SYNTAX INTEGER(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The Hardware Revision of this ACCESS Point." ::= { apManufactureInfo 9 } -- -- ACCESS Point System Configuration Information Group (1.2) -- -- This group contains the ACCESS Point System Configuration Information -- which is used for controlling the ACCESS Point system operations. -- apDeviceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "An ASCII string to identify the Device Name of this ACCESS Point (up to 255 characters)." ::= { apSystemConfig 1 } apDeviceLoc OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "An ASCII string to identify the Location of this ACCESS Point (up to 255 characters)." ::= { apSystemConfig 2 } apHelpFilePath OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "An ASCII string to identify the Location of this ACCESS Point (up to 255 characters)." ::= { apSystemConfig 3 } apMyIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address for the Access Point. It can be set when apStaticIPAddrEnable is set to is enabled." ::= { apSystemConfig 4 } apSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The subnet mask for the Access Point. It can be set when apStaticIPAddrEnable is set to enabled." ::= { apSystemConfig 5 } apGatewayIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the gateway for the Access Point." ::= { apSystemConfig 6 } apAdditionalGatewaysTableLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries in the Additional Gateways Table." ::= { apSystemConfig 7 } apAdditionalGatewaysTable OBJECT-TYPE SYNTAX SEQUENCE OF ApAdditionalGatewaysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of information for additional Gateways. The current number of entries is 4(that mean aditional gateway is 3)." ::= { apSystemConfig 8 } apAdditionalGatewaysEntry OBJECT-TYPE SYNTAX ApAdditionalGatewaysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table of information for additional gateways for this ACCESS Point. A row in this table cannot be created or deleted by SNMP operations on columns of the table." INDEX { additionalGatewaysIndex } ::= { apAdditionalGatewaysTable 1} ApAdditionalGatewaysEntry ::= SEQUENCE { additionalGatewaysIndex INTEGER, apAdditionalGatewaysIPAddr IpAddress } additionalGatewaysIndex OBJECT-TYPE SYNTAX INTEGER (1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specific Gateway information Table index. Range (1..3)." ::= { apAdditionalGatewaysEntry 1 } apAdditionalGatewaysIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the Gateway used for this Access Point." ::= { apAdditionalGatewaysEntry 2 } apDHCPEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/Disables Wireless DHCP mode for the Access Point. Default is disabled(2)." ::= { apSystemConfig 9 } apStaticIPAddrEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/Disables Static IP of ACCESS Point . Default is disabled(2). Before issuing this command, set 'apMyIPAddr', 'apSubnetMask', and 'apGatewayIPAddr' to the proper values." ::= { apSystemConfig 10 } -- -- The ACCESS Point SNMP Configuration Information Group (1.3) -- -- This group contains the SNMP configuration information which is -- used for SNMP operations on the Access Point. A trap receiver table -- allows users to set the Network Manager addresses for receiving -- the traps (i.e. Alert/Alarm/Event) from ACCESS Point devices. -- apSNMPRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of SNMP requests to this SNMP Agent." ::= { apSNMPInfo 1 } apSNMPTraps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of Traps that were generated by this SNMP Agent." ::= { apSNMPInfo 2 } apAllTrapsEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/Disables all SNMP traps. Default is enabled(1)." ::= { apSNMPInfo 3 } apColdBootTrapEnable OBJECT-TYPE SYNTAX INTEGER { disabled(1), trapHost1(2), trapHost2(3), allTrapHosts(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/Disables ACCESS Point Cold Boot trap. Default is allTrapHosts(4). This is a generic-trap and the trap code is 0. When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable mib variable should be enabled for this trap to be issued." ::= { apSNMPInfo 4 } apAuthenFailureTrapEnable OBJECT-TYPE SYNTAX INTEGER { disabled(1), trapHost1(2), trapHost2(3), allTrapHosts(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/Disables authentication failure trap. Default is allTrapHosts(4). This is a generic-trap and the trap code is 4. When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable mib variable should be enabled for this trap to be issued." ::= { apSNMPInfo 5 } apRFTrapEnable OBJECT-TYPE SYNTAX INTEGER { disabled(1), trapHost1(2), trapHost2(3), allTrapHosts(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/Disables ACCESS Point RF driver startup trap. Default is allTrapHosts(4). This is an a3com enterprise-specific trap. When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable mib variable should be enabled for this trap to be issued." ::= { apSNMPInfo 6 } apWarmBootTrapEnable OBJECT-TYPE SYNTAX INTEGER { disabled(1), trapHost1(2), trapHost2(3), allTrapHosts(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/Disables Warm Boot trap. Default is allTrapHosts(4). This is a generic-trap and the trap code is 0. When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable mib variable should be enabled for this trap to be issued." ::= { apSNMPInfo 7 } apWCMaxAssocTrapEnable OBJECT-TYPE SYNTAX INTEGER { disabled(1), trapHost1(2), trapHost2(3), allTrapHosts(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/Disables apWCMaxAssoc Trap. Default is allTrapHosts(4). When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable mib variable should be enabled for this trap to be issued." ::= { apSNMPInfo 8 } apThresholdAssociatedEnable OBJECT-TYPE SYNTAX INTEGER { disabled(1), trapHost1(2), trapHost2(3), allTrapHosts(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/Disables apThresholdAssociated Trap. Default is allTrapHosts(4). When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable mib variable should be enabled for this trap to be issued." ::= { apSNMPInfo 9 } dslSecurityViolationEnable OBJECT-TYPE SYNTAX INTEGER { disabled(1), trapHost1(2), trapHost2(3), allTrapHosts(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/Disables dslSecurityViolation Trap. Default is allTrapHosts(4). When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable MIB variable should be enabled for this trap to be issued." ::= { apSNMPInfo 10 } -- -- The ACCESS Point RF Configuration Information Group (1.4) -- -- This group contains AP Radio Frequency interface configuration -- information. -- apWlanServiceArea OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The WLAN Service Area of the ACCESS Point." ::= { apRFConfig 1 } apCountryName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The country for which the ACCESS Point radio is configured. It is set at the factory and may not be altered." ::= { apRFConfig 2 } apWEPAlgorithm OBJECT-TYPE SYNTAX INTEGER{ openSystem(1), wep40bShareKey(2), wep128bShareKey(3), wep128bpasswordsessionKey(4), wepEAPMD5Authenticationwithnoencryption(5), wepEAPMD5Authenticationwith40bsharedkey(6), wepEAPMD5Authenticationwith128bsharedkey(7), wepEAPMD5Authenticationwith128bpasswordsessionkey(8), wepEAPTLSAuthenticationwith40bsessionkey(9), wepEAPTLSAuthenticationwith128bsessionkey(10), wepSerialAuthenticationwith40bsessionkey(11), wepSerialAuthenticationwith128bsessionkey(12) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is a set of all the shared key WEP algorithms supported by the STAs. The following are the default values and the associated algorithm. Value = 1: open system Value = 2: 40 bit Key Value = 3: 128 bit Key IMPORTANT NOTE: The 128 bit WEP key ENcryption is currently restricted by U.S. laws." ::= { apRFConfig 3 } apShortPreamble OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is a set to enable short preamble for compatibility within the 802.11 community. Setting it to enabled shall result in performance enhancement. Default is disabled." ::= { apRFConfig 4 } apMaxWCTrigger OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the trigger point for sending apWCMaxAssocTrap trap. Range (1..255) The default value is 255." ::= { apRFConfig 5 } apRadioAutoSense OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is a set to enable Radio Auto Sense. Default is enabled." ::= { apRFConfig 6 } apRadioChannel OBJECT-TYPE SYNTAX INTEGER (1..14) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is Radio Channel. This attribute can be written when apRadioAutoSense is disabled." ::= { apRFConfig 7 } apHighPerformance OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is a set to enable Radio High Performance. Default is disabled." ::= { apRFConfig 8 } apTransmitPower OBJECT-TYPE SYNTAX INTEGER { high(1), medium(2), low(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is a set the transmit power from 1-100 micro watts." ::= { apRFConfig 9 } apRadioAntenna OBJECT-TYPE SYNTAX INTEGER { enabledoneantenna(1), bothantennaon(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is a set the section of radio antenna." ::= { apRFConfig 10 } thresholdAssociated OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is a set the threshold of Associated Wireless Client. The default is 200." ::= { apRFConfig 11 } apDataRateMgmt OBJECT-TYPE SYNTAX INTEGER { auto(1), manual(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is automatically or manually set the best data rate ." ::= { apRFConfig 12 } apDataRate5 OBJECT-TYPE SYNTAX INTEGER { optional(1), required(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is a set the data rate to 5.5 Mb/sec ." ::= { apRFConfig 13 } apDataRate11 OBJECT-TYPE SYNTAX INTEGER { optional(1), required(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is a set the data rate to 11.0 Mb/sec ." ::= { apRFConfig 14 } -- -- Access Point Performance Management (2) -- -- -- -- Radio Frequency Interface Statistics Group (2.4) -- -- This group contains statistics/counters information specific to -- the Access Point Radio Frequency Interface. -- rfTxUcastFrms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Unicast frames successfully transmitted." ::= { apRFStatistics 1 } rfRxUcastFrms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Unicast frames successfully received " ::= { apRFStatistics 2 } rfTxBcastFrms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Broadcast frames transmitted " ::= { apRFStatistics 3 } rfRxBcastFrms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Broadcast frames received." ::= { apRFStatistics 4 } rfTxMcastFrms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Multicast frames transmitted." ::= { apRFStatistics 5 } rfRxMcastFrms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Multicast frames received." ::= { apRFStatistics 6 } rfTxEncryptFrms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Encrypted frames transmitted." ::= { apRFStatistics 7 } rfRxEncryptFrms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Encrypted frames received." ::= { apRFStatistics 8 } rfTxFragFrms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of frames fragments transmitted." ::= { apRFStatistics 9 } rfRxFragFrms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of frames fragments received." ::= {apRFStatistics 10 } rfTxBeacons OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Beacon frames transmitted." ::= { apRFStatistics 11 } rfRxBeacons OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Beacon frames received." ::= { apRFStatistics 12 } rfTxACK OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ACK frames transmitted in response to successfully received frames." ::= { apRFStatistics 13 } rfRxACK OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of frames transmitted that had their corresponding ACK frames successfully received frames." ::= { apRFStatistics 14 } rfTxRTS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of RTS frames that were successfully transmitted." ::= { apRFStatistics 15 } rfRxRTS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of RTS received frames." ::= { apRFStatistics 16 } rfCTSFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of frames for which no CTS frames was received in response to a RTS frames being sent." ::= { apRFStatistics 17 } rfRxCTS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of CTS frames received in response to a RTS." ::= { apRFStatistics 18 } rfTxACKFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of frames transmitted that did not have their corresponding ACK packets successfully received." ::= { apRFStatistics 19 } rfTxRetrys OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of frames that were retransmitted." ::= { apRFStatistics 20 } rfFCSErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of frames received with checksum error." ::= { apRFStatistics 21 } rfRxDuplicateFrms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of duplicate frames received." ::= { apRFStatistics 22 } rfWEPUndecryptFrms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of frames received with the WEP sub-field of the Frame Control field set to one and the WEPOn value for the key mapped to the TA's MAC address indicates that the frame should not have been encrypted or that frame is discarded due to the receiving STA not implementing the privacy option." ::= { apRFStatistics 23 } rfWEPICVErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of frames received with the WEP sub-field of the Frame Control field set to one and the value of the ICV as received in the frame does not match the ICV value that is calculated for the contents of the received frame." ::= { apRFStatistics 24 } -- -- Ethernet Interface Statistics Group -- apEtherPacketsIns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of good packets received on the Ethernet interface." ::= { apEtherItfStat 1 } apEtherPacketsOuts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of packets successfully transmitted on the Ethernet interface." ::= { apEtherItfStat 2 } apEtherOctetsIns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of good bytes received on the Ethernet interface." ::= { apEtherItfStat 3 } apEtherOctetsOuts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of bytes successfully transmitted on the Ethernet interface." ::= { apEtherItfStat 4 } apEtherPktsInPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of good packets per second received on the Ethernet Interface." ::= { apEtherItfStat 5 } apEtherPktsOutPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of packets per second successfully transmitted on the Ethernet interface." ::= { apEtherItfStat 6 } apEtherOctInPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of good bytes per second received on the Ethernet Interface." ::= { apEtherItfStat 7 } apEtherOctOutPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of bytes per second successfully transmitted on the Ethernet interface." ::= { apEtherItfStat 8 } -- -- Radio Frequency Interface Statistics Group (2.4) -- -- This group contains statistics/counters information specific to -- the Access Point Radio Frequency Interface. -- apRFFrmsIns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of good packets received on the RF interface." ::= { apRFItfStat 1 } apRFFrmsOuts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of packets successfully transmitted on the RF interface." ::= { apRFItfStat 2 } apRFOctetsIns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of good bytes received on the RF interface." ::= { apRFItfStat 3 } apRFOctetsOuts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of bytes successfully transmitted on the RF interface." ::= { apRFItfStat 4 } apRFFrmsInPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of good packets per second received on the RF Interface." ::= { apRFItfStat 5 } apRFFrmsOutPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of packets per second successfully transmitted on the RF interface." ::= { apRFItfStat 6 } apRFOctInPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of good bytes per second received on the RF Interface." ::= { apRFItfStat 7 } apRFOctOutPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of bytes per second successfully transmitted on the RF interface." ::= { apRFItfStat 8 } -- -- Forwarding count between RF interface to Ethernet Interface -- apEnetsNPktsToEnets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of packets sent from the Ethernet Interface the Ethernet Interface. Must be 0" ::= { apTrafficMatrix 1 } apRFNPktsToEnets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of packets sent from the RF Interface to the Ethernet Interface." ::= { apTrafficMatrix 2 } apEnetsNPktsToRF OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of packets sent from Ethernet Interface to the RF Interface. " ::= { apTrafficMatrix 3 } apRFNPktsToRF OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of packets sent from the RF Interfaceto the RF Interface. Must be 0" ::= { apTrafficMatrix 4 } -- -- Access Point RF Per Frequency Statistics Table Group -- for DSSS System -- This group contains the Access Point Radio Frequency Per -- Frequency statistics/counters information based on the -- historical frequency records used by this Access Point. -- apDSPerFreqStatTable OBJECT-TYPE SYNTAX SEQUENCE OF ApDSPerFreqStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Radio Per Frequency statistics, which is based on the historical frequency records used by this Access Point. The current number of entries is 78." ::= { apPerformMgmt 5 } apDSPerFreqStatEntry OBJECT-TYPE SYNTAX ApDSPerFreqStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table of Radio per frequency statistics. A row in this table cannot be created or deleted by SNMP operations on columns of the table." INDEX { rfDSFrequency} ::= { apDSPerFreqStatTable 1 } ApDSPerFreqStatEntry ::= SEQUENCE { rfDSFrequency INTEGER, rfDSPerFqPktsSents Counter32, rfDSPerFqPktsRcvds Counter32, rfDSPerFqRetries Counter32 } rfDSFrequency OBJECT-TYPE SYNTAX INTEGER (1..14) MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Frequency channel number." ::= { apDSPerFreqStatEntry 1 } rfDSPerFqPktsSents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for the packets sent per frequency." ::= { apDSPerFreqStatEntry 2 } rfDSPerFqPktsRcvds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for the packets received per frequency." ::= { apDSPerFreqStatEntry 3 } rfDSPerFqRetries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for the retries per frequency." ::= { apDSPerFreqStatEntry 4 } -- -- Access Point Fault Management (3) -- apUpdateTemplateStatus OBJECT-TYPE SYNTAX INTEGER { downloadSuccessful(1), downloadUnknownError(2), downloadTimeout(3), badFileName(4), badMacAddrForRestoreFile(5), incorrectFileImage(6), tftpFileNotFound(7), tftpAccessViolation(8), tftpDiskfullOrAllocationExceeded(9), tftpIllegalTFTPoperation(10), tftpUnknownTransferID(11), tftpFileAlreadyExists(12), tftpNoSuchUser(13), fileDownloadOrUpload(14) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports the Firmware/HTML file download and update status." ::= { apFaultMgmt 1 } apBackupFileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the file to be backuped to the TFTP Server. (Including path name and total up to 255 characters.)" ::= { apFaultMgmt 2 } apTemplateOperation OBJECT-TYPE SYNTAX INTEGER { startBackup(1), startTemplate(2), startRestore(3), uploadingData(4), downloadingData(5), notDownloading(6), idle(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "startBackup(1) - Backup the AP configuration through TFTP server. The AP backup configuration, named as apBackupFileName, will be saved in the default location of TFTP server. Before issuing this command, set 'apBackupFileName', and 'apTFTPServer' to the proper values. startTemplate(2) - This allows the network management platform to restore the template configuration of a AP, from one of it's previous backups. It is expected that common Parameters of AP in the backup configuration file, named as apRestoreFileName, will be restored to the AP. Before issuing this command, set 'apRestoreFileName', and 'apTFTPServer' to the proper values. startRestore(3) - This allows the network management platform to restore the full configuration of a AP, from one of it's previous backups. It is expected that full of the data in the backup configuration file, named as apRestoreFileName, will be restored to the AP. Before issuing this command, set 'apRestoreFileName', and 'apTFTPServer' to the proper values." ::= { apFaultMgmt 3 } apRestoreFileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the file to be restored to the AP. (Including path name and total up to 255 characters.)" ::= { apFaultMgmt 4 } apSyslogDstIpAddressTableLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries in the Syslog Destination Ip Address Table." ::= { apFaultMgmt 5 } apSyslogDstIpAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF ApSyslogDstIpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Syslog Destination Ip Address. The current number of entries is 2." ::= { apFaultMgmt 6 } apSyslogDstIpAddressEntry OBJECT-TYPE SYNTAX ApSyslogDstIpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table of Syslog Destination Ip Address for this ACCESS Point. A row in this table cannot be created or deleted by SNMP operations on columns of the table." INDEX { apSyslogDstIpAddressIndex } ::= { apSyslogDstIpAddressTable 1 } ApSyslogDstIpAddressEntry ::= SEQUENCE { apSyslogDstIpAddressIndex INTEGER, apSyslogDstIpAddress IpAddress } apSyslogDstIpAddressIndex OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specific Syslog Destination Ip Address Table index. Range (1..2)." ::= { apSyslogDstIpAddressEntry 1 } apSyslogDstIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of Syslog Destination used for this Access Point." ::= { apSyslogDstIpAddressEntry 2 } apSyslogEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/Disables syslog for the Access Point. Default is disabled(2)." ::= { apFaultMgmt 7 } -- -- Access Point Security Management (4) -- apACLViolations OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of Access Control violations occurred." ::= { apSecurityMgmt 1 } apEAPSupport OBJECT-TYPE SYNTAX INTEGER { disabled (1), eap (2), serialauth (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AP supprt the Extensive Authentication Protocol is enabled or disabled. Default is enabled." ::= { apSecurityMgmt 2 } apAuthServerSupportNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries in the Authenicator Server Table." ::= { apSecurityMgmt 3 } apKeyServerSupportNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries in the Key Server Table." ::= { apSecurityMgmt 4 } apAccountServerSupportNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries in the Accounting Server Table." ::= { apSecurityMgmt 5 } apAuthServerTable OBJECT-TYPE SYNTAX SEQUENCE OF ApAuthServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of information for Authenticator Servers. Now support number of entries is 2." ::= { apSecurityMgmt 6 } apAuthServerEntry OBJECT-TYPE SYNTAX ApAuthServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table of information for Authenticator Servers for this Access Point." INDEX { apAuthServerIndex } ::= { apAuthServerTable 1} ApAuthServerEntry ::= SEQUENCE { apAuthServerIndex Integer32, apAuthServerIPAddr IpAddress, apAuthServerPortNumber Integer32, apAuthSharedSecret OCTET STRING, apAuthServerRetransmit Integer32, apAuthServerTimeout Integer32 } apAuthServerIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number uniquely identifying each Authenticator server." ::= { apAuthServerEntry 1 } apAuthServerIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the Authenticator server referred to in this table entry." ::= { apAuthServerEntry 2 } apAuthServerPortNumber OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port the client is using to send requests to this Authenticator server." ::= { apAuthServerEntry 3 } apAuthSharedSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This values indicates the shared key used by the authentication server." ::= { apAuthServerEntry 4 } apAuthServerRetransmit OBJECT-TYPE SYNTAX Integer32 (1..30) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of times the access point tries to authenticate logon access." ::= { apAuthServerEntry 5 } apAuthServerTimeout OBJECT-TYPE SYNTAX Integer32 (1..60) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds the access point waits for a reply from the RADIUS server before it resends the request" ::= { apAuthServerEntry 6 } apKeyServerTable OBJECT-TYPE SYNTAX SEQUENCE OF ApKeyServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of information for Key Servers. Now support number of entries is 2." ::= { apSecurityMgmt 7 } apKeyServerEntry OBJECT-TYPE SYNTAX ApKeyServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table of information for Key Servers for this Access Point." INDEX { apKeyServerIndex } ::= { apKeyServerTable 1} ApKeyServerEntry ::= SEQUENCE { apKeyServerIndex Integer32, apKeyServerIPAddr IpAddress, apKeyServerPortNumber Integer32 } apKeyServerIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number uniquely identifying each Key server." ::= { apKeyServerEntry 1 } apKeyServerIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the Key server referred to in this table entry." ::= { apKeyServerEntry 2 } apKeyServerPortNumber OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port the client is using to send requests to this server." ::= { apKeyServerEntry 3 } apAccountServerTable OBJECT-TYPE SYNTAX SEQUENCE OF ApAccountServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of information for Account Servers. Now support number of entries is 1." ::= { apSecurityMgmt 8 } apAccountServerEntry OBJECT-TYPE SYNTAX ApAccountServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table of information for Account Servers for this Access Point." INDEX { apAccountServerIndex } ::= { apAccountServerTable 1} ApAccountServerEntry ::= SEQUENCE { apAccountServerIndex Integer32, apAccountServerIPAddr IpAddress, apAccountServerPortNumber Integer32, apAccountServerSharedSecret OCTET STRING, apAccountServerRetransmit Integer32, apAccountServerTimeout Integer32 } apAccountServerIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number uniquely identifying each Account server." ::= { apAccountServerEntry 1 } apAccountServerIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the Account server referred to in this table entry." ::= { apAccountServerEntry 2 } apAccountServerPortNumber OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port the client is using to send requests to this server." ::= { apAccountServerEntry 3 } apAccountServerSharedSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This values indicates the shared key used by the accounting server." ::= { apAccountServerEntry 4 } apAccountServerRetransmit OBJECT-TYPE SYNTAX Integer32 (1..30) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of times the access point tries to accounting logon access." ::= { apAccountServerEntry 5 } apAccountServerTimeout OBJECT-TYPE SYNTAX Integer32 (1..60) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds the access point waits for a reply from the RADIUS accounting server before it resends the request" ::= { apAccountServerEntry 6 } apFastReKeying OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AP supprt the Fast-rekeying is enabled or disabled. Default is disabled." ::= { apSecurityMgmt 9 } apTFTPServerPortNumber OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The TFTP Server port." ::= { apSecurityMgmt 10 } apTFTPRetries OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum retries number of tftp client in SRAPEE" ::= { apSecurityMgmt 11 } apTFTPTimeOutInterval OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time out interval of tftp client in SRAPEE" ::= { apSecurityMgmt 12 } apEncryptionTable OBJECT-TYPE SYNTAX SEQUENCE OF APEncryptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual table for Encryption setting of device" ::= { apSecurityMgmt 13} apEncryptionEntry OBJECT-TYPE SYNTAX APEncryptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry (conceptual row) in the Encryption Table ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex." INDEX { ifIndex } ::= { apEncryptionTable 1 } APEncryptionEntry ::= SEQUENCE { apEncryptionMode INTEGER, apWPAPSKPassPhrase OCTET STRING, apWEPDefaultKeyID INTEGER, apWEPDefaultKey1 OCTET STRING, apWEPDefaultKey2 OCTET STRING, apWEPDefaultKey3 OCTET STRING, apWEPDefaultKey4 OCTET STRING } apEncryptionMode OBJECT-TYPE SYNTAX INTEGER { none(1), wep64b(2), wep128b(3), wep152b(4), tkipWPAPSK(5), tkipWPAEnterprise(6), aesWPAPSK(7), aesWPAEnterprise(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The encryption mode that each IEEE 802.11 Interface(apEncryptionMode.ifIndex) is using. Value: 1 = No Encryption 2 = 64 bit WEP 3 = 128 bit WEP 4 = 152 bit WEP 5 = TKIP using WPA-PSK 6 = TKIP using WPA-Enterprise 7 = AES using WPA-PSK 8 = AES using WPA-Enterprise" ::= { apEncryptionEntry 1 } apWPAPSKPassPhrase OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "A WPA Pre-Share Key Pass Phrase." ::= { apEncryptionEntry 2 } apWEPDefaultKeyID OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "The WEPDefaultKey N currently being used to encrypt data" ::= { apEncryptionEntry 3 } apWEPDefaultKey1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (5|13|16)) MAX-ACCESS read-write STATUS current DESCRIPTION "A WEP default secret key 1 value." ::= { apEncryptionEntry 4 } apWEPDefaultKey2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (5|13|16)) MAX-ACCESS read-write STATUS current DESCRIPTION "A WEP default secret key 2 value." ::= { apEncryptionEntry 5 } apWEPDefaultKey3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (5|13|16)) MAX-ACCESS read-write STATUS current DESCRIPTION "A WEP default secret key 3 value." ::= { apEncryptionEntry 6 } apWEPDefaultKey4 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (5|13|16)) MAX-ACCESS read-write STATUS current DESCRIPTION "A WEP default secret key 4 value." ::= { apEncryptionEntry 7 } -- ********************************************************************** -- * End of Encryption TABLE -- ********************************************************************** -- -- Notifications -- radioTransmitStop NOTIFICATION-TYPE OBJECTS { ifIndex, apMyMacAddr, apRadioChannel } STATUS current DESCRIPTION "The radio has stopped transmitting due to a fault. There may be a jammed channel. The user should change the AP to the different channel or check if there is a RF hardware issue." ::= { a3Com 0 95 } radioReceiveStop NOTIFICATION-TYPE OBJECTS { ifIndex, apMyMacAddr, apRadioChannel } STATUS current DESCRIPTION "The radio has stopped receiving due to a fault. There may be a jammed channel. The user should change the AP to the different channel or check if there is a RF hardware issue." ::= { a3Com 0 96 } exceedMaxAssociated NOTIFICATION-TYPE OBJECTS { ifIndex, apMyMacAddr } STATUS current DESCRIPTION "Exceed max 256 Associated clients. No more association of wireless clients allowed. The user can disassociate the idle wirless clients." ::= { a3Com 0 97 } exceedtThresholdAssociated NOTIFICATION-TYPE OBJECTS { ifIndex, apMyMacAddr } STATUS current DESCRIPTION "The number of Wireless Clients association reaches the threshold of the AP. Please check the MIB object, thresholdAssociated. The default is 200. The number of wireless client is more than the value of thresholdAssociated. This will affect the performace of the AP." ::= { a3Com 0 98 } dslSecurityViolation NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "For Wireless Client, User name or password is not correct in Dynamic Security Link database of AP. The user can check the AP admin if the account exists on the Dynamic Security Link database" ::= { a3Com 0 99 } -- -- managed groups -- apManufactureInfoGroup OBJECT-GROUP OBJECTS { apModelnumber, apSerialnumber, apMyMacAddr, apFirmwareVer, apMfgDate, apWebUiVer, apProductName, apMfgName, apHardwareRev } STATUS current DESCRIPTION "The apManufactureInfo group" ::= { apConfigMgmtGroups 1 } apSystemConfigGroup OBJECT-GROUP OBJECTS { apDeviceName, apDeviceLoc, apHelpFilePath, apMyIPAddr, apSubnetMask, apGatewayIPAddr, apAdditionalGatewaysTableLength, apAdditionalGatewaysIPAddr, apDHCPEnable, apStaticIPAddrEnable } STATUS current DESCRIPTION "The apSystemConfig group" ::= { apConfigMgmtGroups 2 } apSNMPInfoGroup OBJECT-GROUP OBJECTS { apSNMPRequests, apSNMPTraps, apAllTrapsEnable, apColdBootTrapEnable, apAuthenFailureTrapEnable, apRFTrapEnable, apWarmBootTrapEnable, apWCMaxAssocTrapEnable, apThresholdAssociatedEnable, dslSecurityViolationEnable } STATUS current DESCRIPTION "The apSNMPInfo group" ::= { apConfigMgmtGroups 3 } apRFConfigGroup OBJECT-GROUP OBJECTS { apWlanServiceArea, apCountryName, apShortPreamble, apMaxWCTrigger, apWEPAlgorithm, apRadioAutoSense, apRadioChannel, apHighPerformance, apTransmitPower, apRadioAntenna, thresholdAssociated, apDataRateMgmt, apDataRate5, apDataRate11 } STATUS current DESCRIPTION "The apRFConfig group" ::= { apConfigMgmtGroups 4 } apRFStatisticsGroup OBJECT-GROUP OBJECTS { rfTxUcastFrms, rfRxUcastFrms, rfTxBcastFrms, rfRxBcastFrms, rfTxMcastFrms, rfRxMcastFrms, rfTxEncryptFrms, rfRxEncryptFrms, rfTxFragFrms, rfRxFragFrms, rfTxBeacons, rfRxBeacons, rfTxACK, rfRxACK, rfTxRTS, rfRxRTS, rfCTSFailures, rfRxCTS, rfTxACKFailures, rfTxRetrys, rfFCSErrors, rfRxDuplicateFrms, rfWEPUndecryptFrms, rfWEPICVErrors } STATUS current DESCRIPTION "The apRFStatistics group" ::= { apPerformMgmtGroups 1 } apEtherItfStatGroup OBJECT-GROUP OBJECTS { apEtherPacketsIns, apEtherPacketsOuts, apEtherOctetsIns, apEtherOctetsOuts, apEtherPktsInPerSec, apEtherPktsOutPerSec, apEtherOctInPerSec, apEtherOctOutPerSec } STATUS current DESCRIPTION "The apEtherInfStat group" ::= { apPerformMgmtGroups 2 } apRFItfStatGroup OBJECT-GROUP OBJECTS { apRFFrmsIns, apRFFrmsOuts, apRFOctetsIns, apRFOctetsOuts, apRFFrmsInPerSec, apRFFrmsOutPerSec, apRFOctInPerSec, apRFOctOutPerSec } STATUS current DESCRIPTION "The apRFInfStat group" ::= { apPerformMgmtGroups 3} apTrafficMatrixGroup OBJECT-GROUP OBJECTS { apEnetsNPktsToEnets, apRFNPktsToEnets, apEnetsNPktsToRF, apRFNPktsToRF } STATUS current DESCRIPTION "The apTrafficMatrix group" ::= { apPerformMgmtGroups 4} apDSPerFreqStatTableGroup OBJECT-GROUP OBJECTS { rfDSFrequency , rfDSPerFqPktsSents, rfDSPerFqPktsRcvds , rfDSPerFqRetries } STATUS current DESCRIPTION "The apDSPerFreqStatTable group" ::= { apPerformMgmtGroups 5} apFaultMgmtGroup OBJECT-GROUP OBJECTS { apUpdateTemplateStatus, apBackupFileName, apTemplateOperation, apRestoreFileName, apSyslogDstIpAddressTableLength, apSyslogDstIpAddress, apSyslogEnable } STATUS current DESCRIPTION "The apRFStatistics group" ::= { apFaultMgmtGroups 1 } apSecurityMgmtGroup OBJECT-GROUP OBJECTS { apACLViolations, apEAPSupport, apAuthServerSupportNumber, apKeyServerSupportNumber, apAccountServerSupportNumber, apAuthServerIPAddr, apAuthServerPortNumber, apAuthSharedSecret, apAuthServerRetransmit, apAuthServerTimeout, apKeyServerIPAddr, apKeyServerPortNumber, apAccountServerIPAddr, apAccountServerPortNumber, apAccountSharedSecret, apAccountServerRetransmit, apAccountServerTimeout, apFastReKeying, apTFTPServerPortNumber, apTFTPRetries, apTFTPTimeOutInterval, apEncryptionMode, apWPAPSKPassPhrase, apWEPDefaultKeyID, apWEPDefaultKey1, apWEPDefaultKey2, apWEPDefaultKey3, apWEPDefaultKey4 } STATUS current DESCRIPTION "The apSecurityMgmt group" ::= { apSecurityMgmtGroups 1 } wcmNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { radioTransmitStop, radioReceiveStop, exceedMaxAssociated, exceedtThresholdAssociated, dslSecurityViolation } STATUS current DESCRIPTION "The wcm Notifications." ::= {apEventGroups 1} END