--------------------------------------------------------------------------------
--
-- DELL vendor unique environmental monitoring MIB 
--
--------------------------------------------------------------------------------
VM-MIB DEFINITIONS ::= BEGIN
IMPORTS
    enterprises			FROM RFC1155-SMI
    Gauge			FROM RFC1155-SMI
    TimeTicks			FROM RFC1155-SMI
    IpAddress			FROM RFC-1155-SMI
    OBJECT-TYPE			FROM RFC-1212
    DisplayString		FROM RFC-1213
    TRAP-TYPE			FROM RFC-1215;

--------------------------------------------------------------------------------
--
-- DELL specific object identifiers.
--
--------------------------------------------------------------------------------
dell                	OBJECT IDENTIFIER ::= {enterprises 674}
server             	OBJECT IDENTIFIER ::= {dell 10890}
drac2                   OBJECT IDENTIFIER ::= {server 5}

--------------------------------------------------------------------------------
--
-- Management/monitoring MIB object groups.
--
--------------------------------------------------------------------------------
identification			OBJECT IDENTIFIER ::= { drac2 1 }
module				OBJECT IDENTIFIER ::= { drac2 2 }
configAdmin			OBJECT IDENTIFIER ::= { drac2 3 }
configAlert			OBJECT IDENTIFIER ::= { drac2 4 }
configNetwork			OBJECT IDENTIFIER ::= { drac2 5 }
configModem			OBJECT IDENTIFIER ::= { drac2 6 }
control				OBJECT IDENTIFIER ::= { drac2 7 }
voltage				OBJECT IDENTIFIER ::= { drac2 20 }
temperature			OBJECT IDENTIFIER ::= { drac2 21 }
battery				OBJECT IDENTIFIER ::= { drac2 25 }
healthStatus			OBJECT IDENTIFIER ::= { drac2 26 }
traps				OBJECT IDENTIFIER ::= { drac2 100 }

--------------------------------------------------------------------------------
--
-- Identification Group 
--
-- This object group provides information about the agent and the 
-- vendor unique MIB.
--
--------------------------------------------------------------------------------

idManufacturer 			OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..63))
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The name of the manufacturer that produces this 
				module."
    ::= { identification 1 }

idProduct 			OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..63))
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The name of the product that produces this 
				module."
    ::= { identification 2 }

idAgentRevMajor 		OBJECT-TYPE
    SYNTAX			INTEGER (1..255)
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The major revision level of the agent that 
				implements this MIB."
    ::= { identification 3 }

idAgentRevMinor 		OBJECT-TYPE
    SYNTAX			INTEGER (1..255)
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The minor revision level of the agent that 
				implements this MIB."
    ::= { identification 4 }

idMibRevMajor OBJECT-TYPE
    SYNTAX			INTEGER (1..255)
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The major revision level of this MIB. A change 
				in the major revision level could mean a 
				possible  compatibility problem with older 
				versions of the	MIB."
    ::= { identification 5 }

idMibRevMinor OBJECT-TYPE
    SYNTAX			INTEGER (1..255)
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The minor revision level of this MIB. A change 
				in the minor revision level may represent some 
				minor additional support, changes to documenta-
				tion or fixes to errors in a previous revision. 
				Backward  compatibility is maintained as long as
				the major revision level is the same."
    ::= { identification 6 }


--------------------------------------------------------------------------------
--
-- Module group.
--
-- This group contains information about  system modules. This might be
-- a processor, a MegaRAC card, a second MegaRAC, the host motherboard, 
-- devices connected to the I2C bus, a chassis, a power supply etc. Each entry 
-- in the other tables are linked back to a module in this table.
--
--------------------------------------------------------------------------------
										
modNumber 			OBJECT-TYPE
    SYNTAX			Gauge
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The present number of rows in the module 
				table."
    ::= { module 1 }

ModEntry ::=
    SEQUENCE { 
	modIndex		INTEGER,
	modFwRevMajor		INTEGER,
	modFwRevMinor		INTEGER,
	modType			INTEGER,
	modFwRelDate		DisplayString,
	modPciBridge		DisplayString,
	modNetworkCtrl		DisplayString,
	modPcmciaHost		DisplayString,
	modPcCardMfgr		DisplayString,
	modPcCardName		DisplayString,
	modBattery		DisplayString,
	modVoltCount		INTEGER,
	modTempCount		INTEGER,
	modFanCount		INTEGER,
	modSwitchCount		INTEGER,
	modFaultCount		INTEGER,
	modUpTime		TimeTicks,
	modStartDelay		INTEGER,
	modRecoveryTimeout	INTEGER,
	modAutoRecoveryEnable	INTEGER,
	modHeartBeadEnable	INTEGER,
	modAccessControl	DisplayString,
	modEthernetAddress	DisplayString
}

modTable 			OBJECT-TYPE
    SYNTAX			SEQUENCE OF ModEntry
    ACCESS			not-accessible
    STATUS			mandatory
    DESCRIPTION			"Each row describes a module in the system that
				is supplying environmental data or supporting 
				management via the SNMP agent. There may be only
				one row in this	table, but there must be at 
				least one row."
    ::= { module 2 }

modEntry 			OBJECT-TYPE
    SYNTAX			ModEntry
    ACCESS			not-accessible
    STATUS			mandatory
    INDEX			{ modIndex }
    ::= { modTable 1 }

modIndex 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"Index of the module entry."
    ::= { modEntry 1 }

modFwRevMajor 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"This is the firmware major version."
    ::= { modEntry 2 }

modFwRevMinor 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"This is the firmware minor version."
    ::= { modEntry 3 }

modType OBJECT-TYPE
    SYNTAX			INTEGER {
		    		    unknown(0),
				    dell_remote_assistant_card[v2.0](1),
				    motherboard(2), 
				    processor(3),
				    chassis(4),
				    powerSupply(5),
				    diskDrive(6),
				    cdrom(7),
				    tapeDrive(8)
				}
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The type of this module."
    ::= { modEntry 4 }

modFwRelDate	 		OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..63))
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The release date of the firmware."
    ::= { modEntry 5 }

modPciBridge 			OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..63))
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"PCI bridge description."
    ::= { modEntry 6 }

modNetworkCtrl 			OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..63))
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"Network Controller information"
    ::= { modEntry 7 }

modPcmciaHost 			OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..63))
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"Describes the PCMCIA host controller."
    ::= { modEntry 8 }

modPcCardMfgr 			OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..63))
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"Describes the manufacturer of the PC Card."
    ::= { modEntry 9 }

modPcCardName 			OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..63))
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The name of the PC Card."
    ::= { modEntry 10 }

modBattery 			OBJECT-TYPE
    SYNTAX			DisplayString(SIZE(0..31))
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The battery description."
    ::= { modEntry 11 }

modVoltCount 		OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"Total number of volatges to monitor."
    ::= { modEntry 12 }

modTempCount 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"Total number of temparature zone to monitor."
    ::= { modEntry 13 }

modFanCount 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"Total number of fans to monitor."
    ::= { modEntry 14 }

modSwitchCount 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"Total number of switch inputs associated with 
				this module."
    ::= { modEntry 15}

modFaultCount 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"Total number of fault inputs associated with 
				this module."
    ::= { modEntry 16 }

modUpTime 			OBJECT-TYPE
    SYNTAX			TimeTicks
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"Length of time since last system power-up or 
				last time the system was reset (whichever is most 
				recent). This up-time is relative only to the 
				module itself."
    ::= { modEntry 17}

modStartDelay 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"Delay in minutes to look for auto reset."
    ::= { modEntry 18 }

modRecoveryTimeout		OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"Timeout for auto server recovery."
    ::= { modEntry 19 }


modAutoRecoveryEnable		OBJECT-TYPE
    SYNTAX			INTEGER
				{
				  disable (0),
				  enable (1)
				}
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"AutoRecovery enable / disable."
    ::= { modEntry 20 }

modHeartBeatEnable		OBJECT-TYPE
    SYNTAX			INTEGER
				{
				  disable(0),
				  enable(1)
				}
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"Heartbeat enable / disable."
    ::= { modEntry 21 }

modAccessControl		OBJECT-TYPE
    SYNTAX			DisplayString(SIZE(0..64))
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The access control of the card."
    ::= { modEntry 22 }

modEthernetAddress		OBJECT-TYPE
    SYNTAX			DisplayString(SIZE(0..17))
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"This is the Ethernet address of the DRAC."
    ::= { modEntry 23 }

--------------------------------------------------------------------------------
--
-- Administration Configuration group.
--
-- This group contains information about administration configuration 
-- parameters. Each set is associated with a particular module.
--
--------------------------------------------------------------------------------
cfgAdminNumber 			OBJECT-TYPE
    SYNTAX			Gauge
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The present number of rows in the configuration 
				table."
    ::= { configAdmin 1 }

CfgAdminEntry ::=
    SEQUENCE {
	cfgAdminModIndex	INTEGER,
	cfgAdminIndex		INTEGER,
	cfgAdminAlias		DisplayString,
	cfgAdminPassword	DisplayString,
	cfgAdminSessionCallback	DisplayString,
	cfgAdminPagerNumber	DisplayString,
	cfgAdminPagerSubscriber	DisplayString,
	cfgAdminPagerType	INTEGER,
	cfgAdminPagerMask	INTEGER,
	cfgAdminCustomPagerCode	DisplayString,
	cfgAdminTestPager	INTEGER
    }

cfgAdminTable 			OBJECT-TYPE
    SYNTAX			SEQUENCE OF CfgAdminEntry
    ACCESS			not-accessible


    STATUS			mandatory
    DESCRIPTION			"This table contains configuration parameter 
				information."
    ::= { configAdmin 2 }

cfgAdminEntry 			OBJECT-TYPE
    SYNTAX			CfgAdminEntry
    ACCESS			not-accessible
    STATUS			mandatory
    DESCRIPTION			"Each row contains parameters related to a 
				configuration set."
    INDEX			{ cfgAdminModIndex, cfgAdminIndex }
    ::= { cfgAdminTable 1 }


cfgAdminModIndex 		OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"A link into the module table (modTable). This 
				identifies which device this configuration set is 
				associated with."
    ::= { cfgAdminEntry 1 }

cfgAdminIndex 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"This column is used to identify a particular 
				configuration set."
    ::= { cfgAdminEntry 2 }

cfgAdminAlias			OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..14))
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The log on alias of an administrator."
    ::= { cfgAdminEntry 3 }

cfgAdminPassword		OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..14))
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The log on password of an administrator."
    ::= { cfgAdminEntry 4 }

cfgAdminSessionCallback		OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..31))
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The number to call back for a session request."
    ::= { cfgAdminEntry 5 }

cfgAdminPagerNumber		OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..31))
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The pager number to call for alert condition 
				notification."
    ::= { cfgAdminEntry 6 }

cfgAdminPagerSubscriber		OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..31))
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The pager subscriber string for alpha-numeric paging."
    ::= { cfgAdminEntry 7 }

cfgAdminPagerType		OBJECT-TYPE
    SYNTAX			INTEGER {
		    		    none(0),
				    numeric(1),
				    alphanumeric(2)
				}
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The paging mechanism, numeric or alpha-numeric ."
    ::= { cfgAdminEntry 8 }

cfgAdminPagerMask		OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The pager mask. This describes the alert notification
				enable/disable for diffrent level of severity."
    ::= { cfgAdminEntry 9 }

cfgAdminCustomPagerCode		OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..31))
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The numeric/alpha-numeric code to be sent out
				in case of alert notification using pager."
    ::= { cfgAdminEntry 10 }

cfgAdminTestPager		OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"This variable is to test the pager."
    ::= { cfgAdminEntry 11 }


------------------------------------------------------------------------------------
--
-- Alert Configuration group.
--
-- This group contains information about alert notification configuration 
-- parameters. Each set is associated with a particular module.
--
----------------------------------------------------------------------------------
cfgAlertNumber 			OBJECT-TYPE
    SYNTAX			Gauge
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The present number of rows in the configuration 
				table."
    ::= { configAlert 1 }

CfgAlertEntry ::=
    SEQUENCE {
	cfgAlertModIndex		INTEGER,
	cfgAlertIndex			INTEGER,
	cfgAlertTrapSendIPAddress	DisplayString,
	cfgAlertTrapSendCommunity	DisplayString,
	cfgAlertNotificationNumber	DisplayString
    }

cfgAlertTable 			OBJECT-TYPE
    SYNTAX			SEQUENCE OF CfgAlertEntry
    ACCESS			not-accessible
    STATUS			mandatory
    DESCRIPTION			"This table contains configuration parameter 
				information."
    ::= { configAlert 2 }

cfgAlertEntry 			OBJECT-TYPE
    SYNTAX			CfgAlertEntry
    ACCESS			not-accessible
    STATUS			mandatory
    DESCRIPTION			"Each row contains parameters related to a 
				configuration set."
    INDEX			{ cfgAlertModIndex, cfgAlertIndex }
    ::= { cfgAlertTable 1 }


cfgAlertModIndex		OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"A link into the module table (modTable). This 
				identifies which device this configuration set is 
				associated with."
    ::= { cfgAlertEntry 1 }

cfgAlertIndex 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"This column is used to identify a particular 
				configuration set."
    ::= { cfgAlertEntry 2 }

cfgAlertTrapSendIPAddress	OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..16))
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The IP address of trap destination."
    ::= { cfgAlertEntry 3 }

cfgAlertTrapSendCommunity	OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..63))
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The community name for sending trap."
    ::= { cfgAlertEntry 4 }

cfgAlertTrapCallBackNumber OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..31))
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The callback number in case of alert."
    ::= { cfgAlertEntry 5 }


------------------------------------------------------------------------------------
--
-- Network Configuration group.
--
-- This group contains information about network configuration 
-- parameters. Each set is associated with a particular module.
--
----------------------------------------------------------------------------------
cfgNetNumber 			OBJECT-TYPE
    SYNTAX			Gauge
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The present number of rows in the configuration 
				table."
    ::= { configNetwork 1 }

CfgNetEntry ::=
    SEQUENCE {
	cfgNetModIndex		INTEGER,
	cfgNetIndex		INTEGER,
	cfgNetIPAddress		DisplayString,
	cfgNetSubnetMask	DisplayString,
	cfgNetGateway		DisplayString
    }

cfgNetTable 			OBJECT-TYPE
    SYNTAX			SEQUENCE OF CfgNetEntry
    ACCESS			not-accessible
    STATUS			mandatory
    DESCRIPTION			"This table contains configuration parameter 
				information."
    ::= { configNetwork 2 }

cfgNetEntry 			OBJECT-TYPE
    SYNTAX			CfgNetEntry
    ACCESS			not-accessible
    STATUS			mandatory
    DESCRIPTION			"Each row contains parameters related to a 
				configuration set."
    INDEX			{ cfgNetModIndex, cfgNetIndex }
    ::= { cfgNetTable 1 }




cfgNetModIndex 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"A link into the module table (modTable). This 
				identifies which device this configuration set is 
				associated with."
    ::= { cfgNetEntry 1 }

cfgNetIndex 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"This column is used to identify a particular 
				configuration set."
    ::= { cfgNetEntry 2 }

cfgNetIPAddress			OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..16))
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The Internet Protocol address of this network
				port."
    ::= { cfgNetEntry 3 }

cfgNetSubnetMask		OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..16))
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The Internet Protocol subnet mask of this
				network port."
    ::= { cfgNetEntry 4 }

cfgNetGateway			OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..16))
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The Internet Protocol address of the LAN
				gateway."
    ::= { cfgNetEntry 5 }

------------------------------------------------------------------------------------
--
-- Modem Configuration group.
--
-- This group contains information about modem configuration 
-- parameters. Each set is associated with a particular module.
--
----------------------------------------------------------------------------------
cfgModemNumber 			OBJECT-TYPE
    SYNTAX			Gauge
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The present number of rows in the configuration 
				table."
    ::= { configModem 1 }

CfgModemEntry ::=
    SEQUENCE {
	cfgModemModIndex	INTEGER,
	cfgModemIndex		INTEGER,
	cfgModemBaudRate	INTEGER,
	cfgModemDialMode	INTEGER,
	cfgModemExtraInitString	DisplayString,
	cfgModemPwrOnDelay	INTEGER,
	cfgModemSignalDelay	INTEGER,
	cfgModemRingDelay	INTEGER,
	cfgModemCDDelay		INTEGER,
	cfgModemResponseDelay	INTEGER,
	cfgModemHangUpDelay	INTEGER,
	cfgModemConnectTimeout	INTEGER,
	cfgModemDetectTimeout	INTEGER
    }

cfgModemTable 			OBJECT-TYPE
    SYNTAX			SEQUENCE OF CfgModemEntry
    ACCESS			not-accessible
    STATUS			mandatory
    DESCRIPTION			"This table contains configuration parameter 
				information."
    ::= { configModem 2 }

cfgModemEntry 			OBJECT-TYPE
    SYNTAX			CfgModemEntry
    ACCESS			not-accessible
    STATUS			mandatory
    DESCRIPTION			"Each row contains parameters related to a 
				configuration set."
    INDEX			{ cfgModemModIndex, cfgModemIndex }
    ::= { cfgModemTable 1 }



cfgModemModIndex 		OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"A link into the module table (modTable). This 
				identifies which device this configuration set is 
				associated with."
    ::= { cfgModemEntry 1 }

cfgModemIndex 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"This column is used to identify a particular 
				configuration set."
    ::= { cfgModemEntry 2 }

cfgModemBaudRate		OBJECT-TYPE
    SYNTAX			INTEGER 
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"Baud rate."
    ::= { cfgModemEntry 3 }

cfgModemDialMode		OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"Dial mode."
    ::= { cfgModemEntry 4 }

cfgModemExtraInitString		OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..79))
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"Extra initialization string."
    ::= { cfgModemEntry 5 }

cfgModemPwrOnDelay		OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"Power-on delay."
    ::= { cfgModemEntry 6 }

cfgModemSignalDelay		OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"Signal delay."
    ::= { cfgModemEntry 7 }

cfgModemRingDelay		OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"Ring delay."
    ::= { cfgModemEntry 8 }

cfgModemCDDelay			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"CD delay."
    ::= { cfgModemEntry 9 }

cfgModemResponseDelay		OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"Response delay."
    ::= { cfgModemEntry 10 }

cfgModemHangUpDelay		OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"Hang up delay."
    ::= { cfgModemEntry 11 }

cfgModemConnectTimeout		OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"Connect timeout."
    ::= { cfgModemEntry 12 }

cfgModemDetectTimeout		OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"DetectTimeout."
    ::= { cfgModemEntry 13 }
										

--------------------------------------------------------------------------------
--
-- Control group.
--
-- This group contains information about each control parameter
-- in the system. Each  control set is associated with a particular 
-- module.
--
--------------------------------------------------------------------------------
ctlNumber 			OBJECT-TYPE
    SYNTAX			Gauge
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The present number of rows in the control table."
    ::= { control 1 }

CtlEntry ::=
    SEQUENCE {
	ctlModIndex		INTEGER,
	ctlIndex		INTEGER,
	ctlSystemReset		INTEGER,
	ctlSystemShutdown	INTEGER,
	ctlSystemPwrCycle	INTEGER,
	ctlCardShutdown		INTEGER,
	ctlCardSoftReset	INTEGER,
	ctlCardHardReset	INTEGER,
	ctlFlushGPNV		INTEGER
    }

ctlTable 			OBJECT-TYPE
    SYNTAX			SEQUENCE OF CtlEntry
    ACCESS			not-accessible
    STATUS			mandatory
    DESCRIPTION			"This table contains control parameter 
				information."
    ::= { control 2 }

ctlEntry 			OBJECT-TYPE
    SYNTAX			CtlEntry
    ACCESS			not-accessible
    STATUS			mandatory
    DESCRIPTION			"Each row contains parameters related to a control
				set."
    INDEX			{ ctlModIndex, ctlIndex }
    ::= { ctlTable 1 }



ctlModIndex 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"A link into the module table (modTable). This 
				identifies which device this control set is 
				associated with."
    ::= { ctlEntry 1 }

ctlIndex 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"This column is used to identify a particular 
				control set."
    ::= { ctlEntry 2 }

ctlSystemReset 			OBJECT-TYPE
    SYNTAX			INTEGER -- {normal(0), reset(1) }
    MAX-ACCESS			read-write
    STATUS			current
    DESCRIPTION			"Setting this variable causes software or 
				hardware to reset to the state it has immediately 
				after a power-on boot. Applications are either 
				reset or shutdown, depending on what is normal 
				for the module."
    ::= { ctlEntry 3 }

ctlSystemShutdown		OBJECT-TYPE
    SYNTAX			INTEGER -- { normal(0), shutdown(1) }
    MAX-ACCESS			read-write
    STATUS			current
    DESCRIPTION			"Setting this variable causes the OS for a
				graceful shutdown."
    ::= { ctlEntry 4 }

ctlSystemPwrCycle 		OBJECT-TYPE
    SYNTAX			INTEGER -- { normal(0),  cycle(1) }
    MAX-ACCESS			read-write
    STATUS			current
    DESCRIPTION			"Setting this variable causes the software or 
				hardware to go to the state it has before an 
				operating system boots (if possible), turns the 
				power to the hardware off, turns the power to the 
				hardware back on, and then boots to the normal 
				running state."
    ::= { ctlEntry 5 }

ctlCardShutdown			OBJECT-TYPE
    SYNTAX			INTEGER -- { normal(0), shutdown(1) }
    ACCESS			read-write
    STATUS			current
    DESCRIPTION			"This variable is to shutdown the card."
    ::= { ctlEntry 6 }

ctlCardSoftReset		OBJECT-TYPE
    SYNTAX			INTEGER -- { normal(0), shutdown(1) }
    ACCESS			read-write
    STATUS			current
    DESCRIPTION			"This variable is to generate a software
				reset to the card."
    ::= { ctlEntry 7 }

ctlCardHardReset		OBJECT-TYPE
    SYNTAX			INTEGER -- { normal(0), shutdown(1) }
    ACCESS			read-write
    STATUS			current
    DESCRIPTION			"This variable is to generate a hardware 
				reset to the card."
    ::= { ctlEntry 8 }

ctlCardFlushGPNV		OBJECT-TYPE
    SYNTAX			INTEGER -- { normal(0), flush(1) }
    ACCESS			read-write
    STATUS			current
    DESCRIPTION			"This variable is to flush the content of the
				General Purpose Non Volatile (GPNV) memory of DRAC2."
    ::= { ctlEntry 9 }


--------------------------------------------------------------------------------
--
-- Voltage group.
--
-- This group contains information about each voltage measurement channel 
-- in the system. Each channel is associated with a particular module.
--
--------------------------------------------------------------------------------
voltNumber 			OBJECT-TYPE
    SYNTAX			Gauge
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The present number of rows in the voltage 
				table."
    ::= { voltage 1 }

VoltEntry ::=
    SEQUENCE {
	voltModIndex		INTEGER,
	voltIndex		INTEGER,
	voltType		INTEGER,
	voltDescr		DisplayString,
	voltReading		DisplayString,
	voltLimitLowCritical	DisplayString,
	voltLimitHighCritical	DisplayString,
	voltLimitLowWarning	DisplayString,
	voltLimitHighWarning	DisplayString,
	voltItemStatus		INTEGER,
	voltLastAlarm		TimeTicks,
	voltTrapSystem		DisplayString,
	voltTrapGroup		DisplayString,
	voltTrapMessage		DisplayString
    }

voltTable 			OBJECT-TYPE
    SYNTAX			SEQUENCE OF VoltEntry
    ACCESS			not-accessible
    STATUS			mandatory
    DESCRIPTION			"This table contains voltage measurement 
				information."
    ::= { voltage 2 }

voltEntry 			OBJECT-TYPE
    SYNTAX			VoltEntry
    ACCESS			not-accessible
    STATUS			mandatory
    DESCRIPTION			"Each row contains parameters related to a 
				voltage measurement channel."
    INDEX			{ voltModIndex, voltIndex }
    ::= { voltTable 1 }



voltModIndex 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"A link into the module table (modTable). This
				identifies which environmental device is 
				associated with this voltage."
    ::= { voltEntry 1 }

voltIndex 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"This column is used to identify a particular 
				voltage	measurement channel."
    ::= { voltEntry 2 }

voltType 			OBJECT-TYPE
    SYNTAX			INTEGER {
		    		    wallAdapter(0),
				    pciVolt(1),
				    plus3(2),
		    		    plus5(3),
		   		    minus5(4),
		    		    plus12(5),
		   		    minus12(6),
				    plus15(7),
				    minus15(8)
				}
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The type of the voltage measurement channel."
    ::= { voltEntry 3 }

voltDescr 			OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..31))
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"A description of the voltage measurement 
				channel."
    ::= { voltEntry 4 }

voltReading			OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..31))
    UNITS			"Volts"
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The measured voltage."
    ::= { voltEntry 5 }

voltLimitLowCritical		OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..31))
    UNITS			"Volts"
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The low limit for the measured voltage. If the 
				measured value falls below this limit a trap is 
				sent."
    ::= { voltEntry 6 }

voltLimitHighCritical		OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..31))
    UNITS			"Volts"
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The high limit for the measured voltage. If the 
				measured value rises above this limit a trap is 
				sent."
    ::= { voltEntry 7 }

voltLimitLowWarning		OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..31))
    UNITS			"Volts"
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The low limit for the measured voltage. If the 
				measured value falls below this limit a trap is 
				sent."
    ::= { voltEntry 8 }

voltLimitHighWarning		OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..31))
    UNITS			"Volts"
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The high limit for the measured voltage. If the 
				measured value rises above this limit a trap is 
				sent."
    ::= { voltEntry 9 }

voltItemStatus			OBJECT-TYPE
    SYNTAX			INTEGER {
				    undetermined(0),
				    other(1),
				    unknown(2),
				    ok(3),
				    warning(4),
				    critical(5),
				    non-recoverable(6)
				}
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"This is the status of the particular voltage item"
    ::= { voltEntry 10 }

voltLastAlarm 			OBJECT-TYPE
    SYNTAX			TimeTicks
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The time of the last alarm condition."
    ::= { voltEntry 11 }

voltTrapSystem			OBJECT-TYPE
    SYNTAX			OCTET STRING
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"Name of the system generating the alert"
    ::= {voltEntry 12}

voltTrapGroup			OBJECT-TYPE
    SYNTAX			OCTET STRING
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"DMI group generating the alert"
    ::= {voltEntry 13}

voltTrapMessage			OBJECT-TYPE
    SYNTAX			OCTET STRING
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"Alert message"
    ::= {voltEntry 14}
								
--------------------------------------------------------------------------------
--
-- Temperature group.
--
-- This group contains infromation about each temperature measurement 
-- channel in the system. Each channel is associated with a particular
-- module.
--
--------------------------------------------------------------------------------
tempNumber 			OBJECT-TYPE
    SYNTAX			Gauge
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The present number of rows in the temperature 
				table."
    ::= { temperature 1 }

TempEntry ::=
    SEQUENCE {
	tempModIndex		INTEGER,
	tempIndex		INTEGER,
	tempType		INTEGER,
	tempDescr		DisplayString,
	tempReading		DisplayString,
	tempLowCritical		DisplayString,
	tempHighCritical	DisplayString,
	tempLowWarning		DisplayString,
	tempHighWarning		DisplayString,
	tempItemStatus		INTEGER,
	tempLastAlarm		TimeTicks,
	tempTrapSystem		DisplayString,
	tempTrapGroup		DisplayString,
	tempTrapMessage		DisplayString
    }


tempTable 			OBJECT-TYPE
    SYNTAX			SEQUENCE OF TempEntry
    ACCESS			not-accessible
    STATUS			mandatory
    DESCRIPTION			"This table contains temperature measurement 
				information."
    ::= { temperature 2 }

tempEntry 			OBJECT-TYPE
    SYNTAX			TempEntry
    ACCESS			not-accessible
    STATUS			mandatory
    DESCRIPTION			"Each row contains parameters related to a 
				temperature measurement channel."
    INDEX			{ tempModIndex, tempIndex }
    ::= { tempTable 1 }



tempModIndex 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"A link into the module table (modTable). This 
				identifies which environmental device this 
				temperature is associated with."
    ::= { tempEntry 1 }

tempIndex 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"This column is used to identify a particular 
				temperature measurement channel."
    ::= { tempEntry 2 }

tempType 			OBJECT-TYPE
    SYNTAX			INTEGER {
		    		    ambient(0),
				    zone1(1),
				    zone2(2),
		    		    zone3(3),
		   		    zone4(4),
		    		    zone5(5),
		   		    zone6(6),
				    zone7(7),
				    zone8(8)
				}
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The type of the voltage measurement channel."
    ::= { tempEntry 3 }

tempDescr 			OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..31))
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"A description of the temperature measurement 
				channel."
    ::= { tempEntry 4 }

tempReading 			OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..31))
    UNITS			"Degrees Celcius"
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The measured temperature."
    ::= { tempEntry 5 }

tempLowCritical			OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..31))
    UNITS			"Degrees Celcius"
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The high limit for the measured temperature. If 
				the measured value rises above this limit a trap 
				is sent."
    ::= { tempEntry 6 }

tempHighCritical		OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..31))
    UNITS			"Degrees Celcius"
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The high limit for the measured temperature. If 
				the measured value rises above this limit a trap 
				is sent."
    ::= { tempEntry 7 }

tempLowWarning 			OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..31))
    UNITS			"Degrees Celcius"
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The high limit for the measured temperature. If 
				the measured value rises above this limit a trap 
				is sent."
    ::= { tempEntry 8 }

tempHighWarning			OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..31))
    UNITS			"Degrees Celcius"
    ACCESS			read-write
    STATUS			mandatory
    DESCRIPTION			"The high limit for the measured temperature. If 
				the measured value rises above this limit a trap 
				is sent."
    ::= { tempEntry 9 }

tempItemStatus			OBJECT-TYPE
    SYNTAX			INTEGER {
				    undetermined(0),
				    other(1),
				    unknown(2),
				    ok(3),
				    warning(4),
				    critical(5),
				    non-recoverable(6)
				}
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"This is the status of the particular temperature item"
    ::= { tempEntry 10 }
										
tempLastAlarm 			OBJECT-TYPE
    SYNTAX			TimeTicks
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The time of the last alarm condition."
    ::= { tempEntry 11 }

tempTrapSystem			OBJECT-TYPE
    SYNTAX			OCTET STRING
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"Name of the system generating the alert"
    ::= {tempEntry 12}

tempTrapGroup			OBJECT-TYPE
    SYNTAX			OCTET STRING
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"DMI group generating the alert"
    ::= {tempEntry 13}

tempTrapMessage			OBJECT-TYPE
    SYNTAX			OCTET STRING
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"Alert message"
    ::= {tempEntry 14}

--------------------------------------------------------------------------------
--
-- Battery group.
--
-- This section contains information about each Battery in the system. Each
-- Battery set is associated with a particular module.
--
--------------------------------------------------------------------------------
batteryNumber 			OBJECT-TYPE
    SYNTAX			Gauge
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The present number of rows in the battery table."
    ::= { battery 1 }

BatteryEntry ::=
    SEQUENCE {
	batteryModIndex		INTEGER,
	batteryIndex		INTEGER,
	batteryType		INTEGER,
	batteryDescr		DisplayString,
	batteryCharge		INTEGER,
	batteryChargeCount	INTEGER,
	batteryChargePercent	INTEGER,
	batteryStatus		INTEGER,
	batteryLastAlarm	TimeTicks,
	batteryTrapSystem	DisplayString,
	batteryTrapGroup	DisplayString,
	batteryTrapMessage	DisplayString
    }

batteryTable 			OBJECT-TYPE
    SYNTAX			SEQUENCE OF BatteryEntry
    ACCESS			not-accessible
    STATUS			mandatory
    DESCRIPTION			"This table contains battery information."
    ::= { battery 2 }

batteryEntry 			OBJECT-TYPE
    SYNTAX			BatteryEntry
    ACCESS			not-accessible
    STATUS			mandatory
    DESCRIPTION			"Each row contains parameters related to a 
				battery."
    INDEX			{ batteryModIndex, batteryIndex }
    ::= { batteryTable 1 }



batteryModIndex 		OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"A link into the module table (modTable). This 
				identifies which device this battery is 
				associated with."
    ::= { batteryEntry 1 }

batteryIndex 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"This column is used to identify a particular 
				battery."
    ::= { batteryEntry 2 }

batteryType 			OBJECT-TYPE
    SYNTAX			INTEGER {
		    		    unknown(0),
				    standardDryCell(1),
		    		    lithiumION(2),
				    nickelCadmium(3),
				    metalHydride(4)
				}
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The type of the battery input."
    ::= { batteryEntry 3 }

batteryDescr 			OBJECT-TYPE
    SYNTAX			DisplayString (SIZE(0..31))
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"A description of the battery."
    ::= { batteryEntry 4 }

batteryChargeStatus		OBJECT-TYPE
    SYNTAX			INTEGER {
				    notCharging(0),
				    fastCharging(1),
				    trickleCharging(2)
				}
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"Charging status of the battery."
    ::= { batteryEntry 5 }

batteryFastChargeCount		OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"Fast charge counts of the battery."
    ::= { batteryEntry 6 }

batteryChargePercent		OBJECT-TYPE
    SYNTAX			INTEGER(0..100)
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The percentage of charge remaining in the
				battery."
    ::= { batteryEntry 7 }

batteryStatus			OBJECT-TYPE
    SYNTAX			INTEGER {
				    undetermined(0),
				    other(1),
				    unknown(2),
				    ok(3),
				    warning(4),
				    critical(5),
				    non-recoverable(6)
				}
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The status of the battery."
    ::= { batteryEntry 8 }

batteryLastAlarm 		OBJECT-TYPE
    SYNTAX			TimeTicks
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The time of the last alarm condition."
    ::= { batteryEntry 9 }

batteryTrapSystem		OBJECT-TYPE
    SYNTAX			OCTET STRING
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"Name of the system generating the alert"
    ::= {batteryEntry 10}

batteryTrapGroup		OBJECT-TYPE
    SYNTAX			OCTET STRING
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"DMI group generating the alert"
    ::= {batteryEntry 11}

batteryTrapMessage		OBJECT-TYPE
    SYNTAX			OCTET STRING
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"Alert message"
    ::= {batteryEntry 12}

--------------------------------------------------------------------------------
--
-- Health Status group.
--
-- This section contains information about the health information of the server.
-- Groups supported: monitor card, system agent and IPMI controller
--------------------------------------------------------------------------------
healthStatusNumber 		OBJECT-TYPE
    SYNTAX			Gauge
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The present number of rows in the battery table."
    ::= { healthStatus 1 }

HealthEntry ::=
    SEQUENCE {
	healthModIndex			INTEGER,
	healthIndex			INTEGER,
	healthType			INTEGER,
	overallHealthStatus		INTEGER,
	overallVoltageStatus		INTEGER,
	overallTemperatureStatus	INTEGER,
	overallBatteryStatus		INTEGER
    }

healthTable 			OBJECT-TYPE
    SYNTAX			SEQUENCE OF HealthEntry
    ACCESS			not-accessible
    STATUS			mandatory
    DESCRIPTION			"This table contains card's health information."
    ::= { healthStatus 2 }

healthEntry 			OBJECT-TYPE
    SYNTAX			HealthEntry
    ACCESS			not-accessible
    STATUS			mandatory
    DESCRIPTION			"Each row contains parameters related to a health status."
    INDEX			{ healthModIndex, healthIndex }
    ::= { healthTable 1 }



healthModIndex 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"A link into the module table (healthTable). This 
				identifies which health status is associated with."
    ::= { healthEntry 1 }

healthIndex 			OBJECT-TYPE
    SYNTAX			INTEGER
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"This column is used to identify a particular 
				haelth information."
    ::= { healthEntry 2 }

healthType 			OBJECT-TYPE
    SYNTAX			INTEGER {
		    		    unknown(0),
		    		    overallCard(1),
				    overallSystem(2),
				    overallIPMI(3)
				}
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"The particular health status type."
    ::= { healthEntry 3 }

overallHealthStatus 		OBJECT-TYPE
    SYNTAX			INTEGER {
				    undetermined(0),
				    other(1),
				    unknown(2),
				    ok(3),
				    warning(4),
				    critical(5),
				    non-recoverable(6)
				}
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"An overall report of the health of the card."
    ::= { healthEntry 4 }

overallVoltageStatus		OBJECT-TYPE
    SYNTAX			INTEGER {
				    undetermined(0),
				    other(1),
				    unknown(2),
				    ok(3),
				    warning(4),
				    critical(5),
				    non-recoverable(6)
				}
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"An ovearall report of the monitored voltages."
    ::= { healthEntry 5 }

overallTemperatureStatus	OBJECT-TYPE
    SYNTAX			INTEGER {
				    undetermined(0),
				    other(1),
				    unknown(2),
				    ok(3),
				    warning(4),
				    critical(5),
				    non-recoverable(6)
				}
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"An overall report of the monitored temperatures."
    ::= { healthEntry 6 }

overallBatteryStatus 		OBJECT-TYPE
    SYNTAX			INTEGER {
				    undetermined(0),
				    other(1),
				    unknown(2),
				    ok(3),
				    warning(4),
				    critical(5),
				    non-recoverable(6)
				}
    ACCESS			read-only
    STATUS			mandatory
    DESCRIPTION			"An overall report from the battery management."
    ::= { healthEntry 7 }
										



--------------------------------------------------------------------------------
--
-- Traps group.
--
-- This group defines notifications that are sent. Care must be taken to
-- insure that no particular notification is sent to a single receiving
-- entity more often than once every five seconds.
--
--------------------------------------------------------------------------------

trapVoltageGood 		TRAP-TYPE
    ENTERPRISE			{ drac2 }
    VARIABLES			{ voltTrapSystem, voltTrapGroup, voltTrapMessage, 
				voltItemStatus, voltReading }
    DESCRIPTION			"This trap is sent each time a voltage channel 
				reading comes back in normal range."
    ::= 4

trapVoltageWarning		TRAP-TYPE
    ENTERPRISE			{ drac2 }
    VARIABLES			{ voltTrapSystem, voltTrapGroup, voltTrapMessage, 
				voltItemStatus, voltReading }
    DESCRIPTION			"This trap is sent each time a voltage channel 
				reading goes out of warning range."
    ::= 5

trapVoltageCritical		TRAP-TYPE
    ENTERPRISE			{ drac2 }
    VARIABLES			{ voltTrapSystem, voltTrapGroup, voltTrapMessage, 
				voltItemStatus, voltReading }
    DESCRIPTION			"This trap is sent each time a voltage channel 
				reading goes out of critical range."
    ::= 6


trapTemperatureGood 		TRAP-TYPE
    ENTERPRISE			{ drac2 }
    VARIABLES			{ tempTrapSystem, tempTrapGroup, tempTrapMessage, 
				tempItemStatus, tempReading }
    DESCRIPTION			"This trap is sent each time a temperature channel 
				reading	comes back in normal range."
    ::= 7

trapTemperatureWarning 		TRAP-TYPE
    ENTERPRISE			{ drac2 }
    VARIABLES			{ tempTrapSystem, tempTrapGroup, tempTrapMessage, 
				tempItemStatus, tempReading }
    DESCRIPTION			"This trap is sent each time a temperature channel 
				reading goes out of warning range."
    ::= 8

trapTemperatureCritical		TRAP-TYPE
    ENTERPRISE			{ drac2 }
    VARIABLES			{ tempTrapSystem, tempTrapGroup, tempTrapMessage, 
				tempItemStatus, tempReading }
    DESCRIPTION			"This trap is sent each time a temperature channel 
				reading goes out of warning range."
    ::= 9

trapBatteryGood			TRAP-TYPE
    ENTERPRISE			{ drac2 }
    VARIABLES			{ batteryTrapSystem, batteryTrapGroup, batteryTrapMessage, 
				batteryStatus, batteryChargePercent }
    DESCRIPTION			"This trap is sent each time a battery with low
				 charge is re-charged above the specified low
				threshold."
    ::= 10
	
trapBatteryLow	 		TRAP-TYPE
    ENTERPRISE			{ drac2 }
    VARIABLES			{ batteryTrapSystem, batteryTrapGroup, batteryTrapMessage, 
				batteryStatus, batteryChargePercent }
    DESCRIPTION			"This trap is sent each time the battery charge
				 is under the specified low threshold."
    ::= 11

END