-- SECTION 1: Top Level Definitions

S5-AGENT-MIB DEFINITIONS ::= BEGIN


-- 5000 Agent MIB Release 1.3.9
-- Revision 10/14/98

-- Copyright 1995-98 Bay Networks, Inc.
-- All rights reserved.
-- This Bay Networks SNMP Management Information Base Specification
-- (Specification) embodies Bay Networks' confidential and
-- proprietary intellectual property. Bay Networks retains all
-- title and ownership in the Specification, including any
-- revisions.

-- This Specification is supplied "AS IS," and Bay Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.


-- Imports

IMPORTS
	IpAddress, TimeTicks
		FROM RFC1155-SMI
	OBJECT-TYPE
		FROM RFC-1212
	DisplayString
		FROM RFC1213-MIB
	s5Agent
		FROM S5-ROOT-MIB
	TimeIntervalSec, IpxAddress, MacAddress
		FROM S5-TCS-MIB;


-- Agent Groups

s5AgentHw	OBJECT IDENTIFIER ::= { s5Agent 1 }
s5AgentInfo	OBJECT IDENTIFIER ::= { s5Agent 2 }
s5AgentMgmt	OBJECT IDENTIFIER ::= { s5Agent 3 }



-- SECTION 2: MIB Objects

-- Hardware Information

s5AgMyGrpIndx OBJECT-TYPE
	SYNTAX	INTEGER (1..32767)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The index of the group containing
		the agent."
	::= { s5AgentHw 1 }

s5AgMyComIndx OBJECT-TYPE
	SYNTAX	INTEGER (1..32767)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The index of the component containing
		the agent."
	::= { s5AgentHw 2 }


-- Global Information

s5AgentGbl	OBJECT IDENTIFIER ::= { s5AgentInfo 1 }

s5AgInfoReBoot OBJECT-TYPE
	SYNTAX	INTEGER {
		other(1),
		running(2),
		restart(3),
		reboot(4),
                reset(5),
                download(6),
                downloadAndRestart(7),
                downloadAndReboot(8),
                downloadAndReset(9)
		}
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Action object to reboot the agent.
		The following values can only be read:
		  other(1).....agent in unknown or other state
		  running(2)...agent running

		The following values can be written:
		  restart(3)...restart agent (i.e., jump to
		                 beginning of agent code)
		  reboot(4)....start boot sequence for agent
		                 (i.e., jump to beginning of
		                 boot firmware)
		  reset(5).....do a hardware reset
                  download(6)..............activate download of
                               a new agent
                  downloadAndRestart(7)....activate download of
                               a new agent and restart
                  downloadAndReboot(8).....activate download of
                               a new agent and reboot
                  downloadAndReset(9)......activate download of
                               a new agent and reset

                 If s5AgInfoScheduleBootTime is set in the same PDU as
                 s5AgInfoReBoot, the action specified occurs when the
                 scheduled time reaches zero; otherwise, the action
                 occurs immediately. The agent does best efforts to
                 return a response before the action occurs.
 
                 If any of the combined download actions are
                 requested, neither action occurs until the
                 expiry of s5AgInfoScheduleBootTime, if set."
	::= { s5AgentGbl 1 }

s5AgInfoWriteCfg OBJECT-TYPE
	SYNTAX	INTEGER {
		other(1),
		valid(2),
		write(3)
		}
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Action object to cause current configuration
		settings to be written to local nonvolatile
		storage. The following values can only be read:
		  other(1)...some unknown or other state
		  valid(2)...contents valid

		The following value can be written:
		  write(3)...write configuration settings to
		               local storage (such as nonvol)

		If the write operation write fails, then the
		agent will return error 'genErr' on the SET."
	::= { s5AgentGbl 2 }

s5AgInfoMgmtProtocolNxtBoot OBJECT-TYPE
	SYNTAX	INTEGER {
		other(1),
		ipOnly(2),
		ipxOnly(3),
		ipAndIpx(4)
		}
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The transport protocol(s) to use after
		the next boot of the agent. The following
		value is read-only:
		  other(1)....unknown or some other protocol

		The following value is read-write:
		  ipOnly(2).....only IP
		  ipxOnly(3)....only IPX
		  ipAndIpx(4)...IP and IPX."
	::= { s5AgentGbl 3 }

s5AgInfoMgmtProtocolCur OBJECT-TYPE
	SYNTAX	INTEGER {
		other(1),
		ipOnly(2) ,
		ipxOnly(3),
		ipAndIpx(4)
		}
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The current transport protocol(s) that are
		being supported by the agent. The following
		value is read-only:
		  other(1)....unknown or some other protocol

		The following value is read-write: 
		  ipOnly(2).....only IP
		  ipxOnly(3)....only IPX
		  ipAndIpx(4)...IP and IPX.

		When the IP protocol stack is not enabled,
		the agent will not respond to PING or SNMP
		requests over IP.

		When the IPX protocol stack is not enabled,
		the agent will not respond to diagnostic SAP or
		SNMP requests over IPX.

		It is suggested that NMS not disable the transport
		they are using."
	::= { s5AgentGbl 4 }

s5AgInfoBootMode OBJECT-TYPE
	SYNTAX	INTEGER {
		other(1),
		local(2),
		net(3)
		}
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The source for initial protocol configuration
		information at next boot. For IP, a setting of
		net(3) means that BOOTP will be used to get the
		agent's IP address(es), load server address, and
		configuration file name.  For IPX, a setting of net(3)
		means SAP will be used to get the agent's Novell
		network number(s), and the configuation filename
		will be loaded from local storage (note - the load
		server address is not needed in a Novell network).

		The following value is read-only:
		  other(1).....not applicable or some other case

		The following values are read-write:
		  local(2).....don't use the network
		  net(3).......try using the network and if that
		                 fails then use protocol configuration
		                 information from local storage.

		Note:   The load server address is not configurable
		        and is not available in this MIB object on a
		        Novell network."
	::= { s5AgentGbl 5 }

s5AgInfoCfgLoadMode OBJECT-TYPE
	SYNTAX	INTEGER {
		other(1),
		local(2),
		net(3),
		locAsBk(4)
		}
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The source from which to load configuration
		information at next boot. The following value
		is read-only:
		  other(1)...not applicable or some other case

		The following values are read-write:
		  local(2).....get from local storage
		  net(3).......load from the network
		  locAsBk(4)...try using network and if it fails
		                 then use local information.

		When local(2) is specified, the configuration
		information is loaded from local storage.
		If the local configuration is not valid
		(checks for ip = 0.0.0.0), then BOOTP is used
		for the IP stack. (In IPX only mode, the IP
		address could be 0.0.0.0 and IPX does not rely
		on the IP address.  The agent checks the IPX
		address, and if the network number of the IPX
		address is equal to 0 the agent uses  SAP).

		When net(3) is specified, the configuration 
		information will be downloaded from the network
		only. The configuration information will never
		be loaded from local storage, even if downloading
		fails and the local configuration information exists.

		When locAsBk(4) is specified, a download of the
		configuration information will be tried over the
		network. If the network download fails then the
		configuration information will be loaded from
		local storage."
	::= { s5AgentGbl 6 }

s5AgInfoImgLoadMode OBJECT-TYPE
	SYNTAX	INTEGER {
		other(1),
		local(2),
		net(3),
		locAsBk(4),
		netIfNewer(5)
		}
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The source from which to load the agent image
		at next boot. The following value is read-only:
		  other(1)...not applicable or some other case

		The following values are read-write:
		  local(2)........get from local storage
		  net(3)..........load from the network
		  locAsBk(4)......try using network and if it fails
		                    then use local information.
		  netIfNewer(5)...try loading image over the net.
		                    If can load image, and it is newer
		                    than the local image, then use it.
		                    Otherwise, use local image.

		If the local image is not valid, the setting will
		be net(3) and cannot be changed to local(2),
		or locAsBk(4) until a valid image file is loaded
		(i.e., error 'badValue' will be returned on SETS with
		value other than net(3)). When the local image is
		not valid and the network download of the image fails,
		the entire boot process will be repeated.

		When local(2) is specified, the image will be loaded
		from local storage.

		When net(3) is specified, the image will be downloaded
		from the network only. The image file will never be
		loaded from local storage, even if downloading fails
		and the local image exists.

		When locAsBk(4) is specified, a download of the image
		will be tried over the network. If the network
		download fails then the image is loaded from local
		storage.

		When netIfNewer(5) is specified, a download of the
		image will be tried over the network. If successful,
		it will then be compared to the image stored in local
		storage. The most recent version of the two will be
		used. If the local image is not valid, the network
		will always be used. If the network download fails
		then the image is loaded from the local storage."
	::= { s5AgentGbl 7 }

s5AgInfoImgSaveMode OBJECT-TYPE
	SYNTAX	INTEGER {
		notAvail(1),
		writeIfDiff(2),
		writeIfNewer(3),
		noWrite(4)
		}
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Indicates what to do with the image (when
		loaded from the network) on the next boot.
		The following value can only be read:
		  notAvail(1)...the save operation is not
		                  available

		The following values can be written (and
		read) if the device supports this capability:
		  writeIfDiff(2)....save image to local storage
		                      at next boot if image is
		                      different from saved contents
		  writeIfNewer(3)...save image to local storage
		                      at next boot if image is
		                      newer than saved contents.
		  noWrite(4)........do not save image to local
		                      storage at next boot, even if
		                      image is newer or different."
	::= { s5AgentGbl 8 }

s5AgInfoImgSaveStatus OBJECT-TYPE
	SYNTAX	INTEGER {
		notAvail(1),
		noSave(2),
		saved(3),
		saveFailed(4)
		}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"Indicates what happened to the image file
		on the last boot. The following values
		are returned:
		  notAvail(1).....the save operation is not
		                    available
		  noSave(2).......image not saved since image was
		                    not asked to be saved, or image
		                    was not loaded from the network
		  saved(3)........image saved
		  saveFailed(4)...tried to save image, but failed"
	::= { s5AgentGbl 9 }

s5AgInfoVer OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The version of the agent in the form
		'major.minor.maintenance[letters]'. This
		is an alias for the value of the object
		s5ChasStoreCntntVer for the RAM of the
		module containing the agent."
	::= { s5AgentGbl 10 }

s5AgInfoLocStorVer OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The version of the agent image saved in local
		storage such as flash memory in the form
		'major.minor.maintenance[letters]'. If not
		known or not available, then the value is
		a zero length string. This is an alias for
		the value of the object s5ChasStoreCntntVer
		for the local storage of the module containing
		the agent."
	::= { s5AgentGbl 11 }

s5AgInfoNxtBootDfltGwAddr OBJECT-TYPE
	SYNTAX	IpAddress
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The IP address of the default gateway (router)
		for the agent to use after the next boot. (NOTE:
		the current default router is the value of object
		s5AgInfoCurDfltGwAddr (or ipRouteNextHop.0.0.0.0).)

		If not used, then this object has the value
		of 0.0.0.0."
	::= { s5AgentGbl 12 }

s5AgInfoCurDfltGwAddr OBJECT-TYPE
	SYNTAX	IpAddress
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The IP address of the current default gateway
		(router). (NOTE: this is an alias for the object
		ipRouteNextHop in the row of the table
		ipRouteTable which has object ipRouteDest with
		a value of 0.0.0.0.)

		If not used, then this object has the value
		of 0.0.0.0."
	::= { s5AgentGbl 13 }

s5AgInfoDramUsage  OBJECT-TYPE
	SYNTAX	INTEGER  (-1..100)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"An indication of the percentage of DRAM currently
		in use by this agent.  If this information is not
		available the agent shall return -1, otherwise the
		percentage of DRAM in use is returned as an integer
		between 0 and 100.  The percentage is defined as the
		DRAM currently used by  this agent divided by the
		total DRAM available to this agent."
	::= { s5AgentGbl 14 }

s5AgInfoLoadProtocolNxtBoot OBJECT-TYPE
	SYNTAX	INTEGER {
		other(1),
		ipOnly(2),
		ipxOnly(3),
		auto(4)
		}
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The transport protocol(s) over which the 
		agent is to use to load the configuration 
		information and the agent image at the 
		next boot of the agent. The following 
		value is read-only:
		  other(1)....unknown or some other protocol

		The following values are read-write:
		  ipOnly(2)....use load protocol over IP
		  ipxOnly(3)...use load protocol over IPX
		  auto(4)......try using the IP load function
		                 and if that fails then use IPX
		                 load function.  If the IPX
		                 load function also fails, repeat
		                 the same process until one or
		                 the other protocol succeeds."
	::= { s5AgentGbl 15 }

s5AgInfoLoadProtocolLast OBJECT-TYPE
	SYNTAX	INTEGER {
		reserved(1),
		ip(2),
		ipx(3),
		local(4)
		}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The transport protocol over which the agent image
		and configuration information were last loaded.  The
		following values are read-only:
		  reserved(1)...reserved
		  ip(2).........gotten from the network using
		                  a load protocol over IP
		  ipx(3)........gotten from the network using
		                  a load protocol over IPX
		  local(4)......loaded from local storage."
	::= { s5AgentGbl 16 }


s5AgInfoSlotScope OBJECT-TYPE
      SYNTAX    OCTET STRING
      ACCESS     read-only
      STATUS     mandatory
      DESCRIPTION
              "This object contains information about all
              the slots an agent can manage.  The value is encoded
              in an octet string. One byte has information about 8
              slots. If a bit is set then agent can manage the
              corresponding slot. Byte 1 will have information about
              slots 1-8, byte 2 will have information about
              slots 9-16, and so on. For example an agent that
              can manage slots 2-7 in a 14 slot chassis should have
              the value :
                              8d:00 (0111 1110 0000 0000)
              If an agent returns a string of size 0, then it can
              manage all slots in chassis."
      ::= { s5AgentGbl 17 }

s5AgInfoImgType OBJECT-TYPE
      SYNTAX  INTEGER {
              other(1),
              typeA(2),
              typeB(3),
              typeC(4)
              }
      ACCESS  read-only
      STATUS  mandatory
      DESCRIPTION
              "Indicates the type of agent image. This object is meant
               to distinguish between agents having the same version
               number running on the same hardware, but with dissimilar
               functionality. Following are examples of possible values
               for various enumerations.
               other(1) ....... A unique agent eg., 5310A, 5dn310 etc
               typeA(2) ....... fusion basic agent.
               typeB(2) ....... fusion advanced agent."
      ::= { s5AgentGbl 18 }

s5AgInfoScheduleBootTime OBJECT-TYPE
        SYNTAX  INTEGER (0..10080)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The time, measured in minutes, remaining until the
                 action(s) set by s5AgInfoReBoot will be performed.
                 This value must be set in the same set request as
                 the value of s5AgInfoReBoot; otherwise, a badValue
                 error is returned.
 
                 If this value has been set, the number returned will
                 count down to zero, and the time remaining in minutes
                 will be rounded up to the next whole minute.
 
                 Actions set via s5AgInfoReBoot can be scheduled for
                 up to seven days in advance.
                 7 * 24 * 60 equals the maximum settable value of
                 10080. If this attribute has not been set, a value of 
                 zero should be returned."
        ::= { s5AgentGbl 19 }
 
s5AgInfoScheduleBootCancel OBJECT-TYPE
        SYNTAX  INTEGER {
                other(1),
                cancel(2)
                 }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Cancel a scheduled s5AgInfoReboot action.
                The following value is read-only:
                  other(1)...not applicable or some other case
                     This is always the value that return when
                     read.
 
                The following values are read-write:
                  cancel(2)...cancel a scheduled boot.
 
                Setting this attribute to cancel(2) sets s5AgInfoReBoot
                to running(2) and s5AgInfoScheduleBootTime to zero."
        ::= { s5AgentGbl 20 }
  
s5AgInfoNumBootBanks OBJECT-TYPE
        SYNTAX  INTEGER (0..255)
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of local storage locations (or flash
		 memory banks) available on this device for
		 operational code images.
 
                 Devices without local image capability or not
		 supporting this attribute shall return a value of 0."
        ::= { s5AgentGbl 21 }
 
 
s5AgInfoNextBootBank OBJECT-TYPE
        SYNTAX  INTEGER (0..255)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The source of the image to be loaded upon the
		 next  boot of the device.
 
                 If a value is set larger than s5AgInfoNumBootBanks,
                 a badValue error should be returned.
 
                 Devices without local image capability or not
		 supporting this attribute shall return a value of 0."
        ::= { s5AgentGbl 22 }

 
 
s5AgInfoDstLoadBank OBJECT-TYPE
        SYNTAX  INTEGER (0..255)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The local storage bank where the next system image
                 image is downloaded to.
 
                 Devices without local image capability or not 
                 supporting this attribute shall return a value of 0."
        ::= { s5AgentGbl 23 }

s5AgInfoFileAction OBJECT-TYPE
    SYNTAX INTEGER {
           other(1),
           dnldConfig(2),
           dnldImg(3),
           upldConfig(4),
           upldImg(5)
           }

    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object is used to download or upload a config file or
         an image file.

         In read operation, if no action taken since the boot up, it will
         return other(1). Otherwise it will return the latest action such
         as dnldConfig(2), dnldImg(3), upldConfig(4) and upldImg(5).

         In write operation, the values that can be written are:

            dnldConfig(2) ... download a config file to a device. The new
                              config file will not take effect until the
                              next boot cycle of the device.
            dnldImg(3) ...... download an image to a device.
            upldConfig(4) ... upload a config file to a server from
                              a device. The config file contains the current                              MIB object values of the device.
            upldImg(5) ...... upload a image from a device to a server"

    ::= {s5AgentGbl 24}


s5AgInfoFileStatus OBJECT-TYPE
    SYNTAX INTEGER {
            other(1),
            inProgress (2),
            success (3),
            fail (4)
            }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This object is used to get the status of the latest action as
        shown by s5AgInfoFileAction. The values that can be read are:
 
            other(1) ......... if no action taken since the boot up
            inProgress (2) ... the operation is in progress
            success (3) ...... the operation succeeds.
            fail (4) ......... the operation is failed."

    ::= {s5AgentGbl 25}


-- Agent's Interface Information Table


s5AgMyIfTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF S5AgMyIfEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A table that provides additional information
		about the agent's interfaces. The number of
		entries in the table is determined by the
		number of interfaces on the agent."
	::= { s5AgentInfo 2 }


s5AgMyIfEntry OBJECT-TYPE
	SYNTAX	S5AgMyIfEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A row in the table of additional information
		about the agent's interfaces. Entries can not
		be created or deleted via SNMP requests."
	INDEX	{ s5AgMyIfIndx }
	::= { s5AgMyIfTable 1 }


S5AgMyIfEntry ::= SEQUENCE {
	s5AgMyIfIndx INTEGER,
	s5AgMyIfNxtBootIpAddr IpAddress,
	s5AgMyIfNxtBootNetMask IpAddress,
	s5AgMyIfCfgFname DisplayString,
	s5AgMyIfLdSvrAddr IpAddress,
	s5AgMyIfImgFname DisplayString,
	s5AgMyIfValidFlag INTEGER,
	s5AgMyIfNxtBootIpxAddr IpxAddress,
        s5AgMyIfBootRouterAddr IpAddress,
        s5AgMyIfMacAddr MacAddress
	}



s5AgMyIfIndx OBJECT-TYPE
	SYNTAX	INTEGER 
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The index of the interface. This has the same
		value as ifIndex for the interface."
	::= { s5AgMyIfEntry 1 }

s5AgMyIfNxtBootIpAddr OBJECT-TYPE
	SYNTAX	IpAddress
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"For the next boot, the IP address of the
		the interface. If not used, then the
		value is 0.0.0.0. (NOTE: the current IP
		address for the interface is found in table
		ipAddrTable and in table s5AgOthIfTable.)"
	::= { s5AgMyIfEntry 2 }

s5AgMyIfNxtBootNetMask OBJECT-TYPE
	SYNTAX	IpAddress
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"For the next boot, the subnet mask for
		the interface. If not used, then the
		value is 0.0.0.0. (NOTE: the current subnet
		mask for the interface is found in table
		ipAddrTable.)"
	::= { s5AgMyIfEntry 3 }

s5AgMyIfCfgFname OBJECT-TYPE
	SYNTAX	DisplayString (SIZE (0..64))
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Name of the configuration file currently
		associated with the interface. When not
		used, the value is a zero length string."
	::= { s5AgMyIfEntry 4 }

s5AgMyIfLdSvrAddr OBJECT-TYPE
	SYNTAX	IpAddress
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The IP address of the load server for the
		configuration file and/or the image file.
		If not used, then the value is 0.0.0.0"
	::= { s5AgMyIfEntry 5 }

s5AgMyIfImgFname OBJECT-TYPE
	SYNTAX	DisplayString (SIZE (0..128))
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Name of the image file(s) currently associated
		with the interface. Some agents in special
		situations may support a value which contains
		multiple file names instead of a single file
		name. Multiple names are specified as a list
		of file names separated by semicolons (;).
		When the object is not used, the value is a
		zero length string."
	::= { s5AgMyIfEntry 6 }

s5AgMyIfValidFlag OBJECT-TYPE
	SYNTAX	INTEGER {
		valid(1),
		invalid(2)
		}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"Indicates if the configuration and/or image
		file(s) were downloaded from this interface and
		if the file names have not been changed. The
		following values can be read:
		  valid(1).....configuration and/or image file(s)
		                 downloaded from this interface
		                 are currently in use
		  invalid(2)...cfg and/or image files downloaded
		                 from this interface are not
		                 in use (this may also mean that
		                 there are no files downloaded from
		                 this interface)."
	::= { s5AgMyIfEntry 7 }

s5AgMyIfNxtBootIpxAddr OBJECT-TYPE
	SYNTAX	IpxAddress
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"For the next boot, the IPX address of the
		the interface.  If the IPX protocol is not used,
		then the value is 00000000:000000000000.

		NOTE: The current IPX address for the 
		      interface is found in table s5AgOthIfTable."
	::= { s5AgMyIfEntry 8 }


s5AgMyIfBootRouterAddr OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The IP address of the boot router for the
                 configuration file and/or the image file.
                 If not used, then the value is 0.0.0.0"
        ::= { s5AgMyIfEntry 9 }

s5AgMyIfMacAddr OBJECT-TYPE
        SYNTAX MacAddress
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
                "The MAC address of the interface.  The value
                 is 00:00:00:00:00:00 if there is no interface."
        ::= { s5AgMyIfEntry 10}



-- Other Agents' Interface Information Table

s5AgOthIfTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF S5AgOthIfEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A table that provides information about
		each interface for each agent in the chassis.
		The number of entries in the table is determined
		by the number of agents in the chassis and their
		configuration."
	::= { s5AgentInfo 3 }

s5AgOthIfEntry OBJECT-TYPE
	SYNTAX	S5AgOthIfEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A row in the table of information about interface
		information for all agents in the chassis. Entries
		can not be created or deleted via SNMP requests."
	INDEX	{ s5AgOthIfGrpIndx,
		  s5AgOthIfComIndx,
		  s5AgOthIfIndx }
	::= { s5AgOthIfTable 1 }

S5AgOthIfEntry ::= SEQUENCE {
	s5AgOthIfGrpIndx INTEGER,
	s5AgOthIfComIndx INTEGER,
	s5AgOthIfIndx INTEGER,
	s5AgOthIfIpAddr IpAddress,
	s5AgOthIfIpxAddr IpxAddress
	}

s5AgOthIfGrpIndx OBJECT-TYPE
	SYNTAX	INTEGER (1..32767)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The index of the group containing the component
		containing the agent."
	::= { s5AgOthIfEntry 1 }

s5AgOthIfComIndx OBJECT-TYPE
	SYNTAX	INTEGER (1..32767)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The index of the component in the group
		containing the agent."
	::= { s5AgOthIfEntry 2 }

s5AgOthIfIndx OBJECT-TYPE
	SYNTAX	INTEGER 
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The index of the interface. This is the same
		value as ifIndex."
	::= { s5AgOthIfEntry 3 }

s5AgOthIfIpAddr OBJECT-TYPE
	SYNTAX	IpAddress
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The IP address of the interface. If not used,
		then the value is 0.0.0.0."
	::= { s5AgOthIfEntry 4 }

s5AgOthIfIpxAddr OBJECT-TYPE
	SYNTAX	IpxAddress
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The IPX address of the interface.  If the IPX
		protocol is not used,  then the value is
		00000000:000000000000."
	::= { s5AgOthIfEntry 5 }



-- IP Router Aging And Default Router Selection Information

s5AgIpRtrDefaultTimeToLive OBJECT-TYPE
	SYNTAX	TimeIntervalSec (60..3600)
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The lifetime of IP router entries in seconds. 
		The maximum length of time that a IP router 
		is to be considered alive in the absence of 
		further positive advice. The default lifetime 
		is used for routers learned through IP router 
		protocols that do not specify a lifetime (e.g. 
		statically  configured, ICMP redirects)."
	DEFVAL { 540 }  -- 9 minutes
	::= { s5AgentInfo 4 }

s5AgIpDefaultRtrSelectionMode OBJECT-TYPE
	SYNTAX	INTEGER {
		other(1),
		config(2),
		static(3),
		dynamic(4)
		}
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The method used to select a default IP router.
		The following value is read-only:
		  other(1).......not applicable or other case
		The following values are read-write:
		  config(2).....use configured primary default 
				router. If no primary default router 
				is specified, there will be no 
				default IP route.
		  static(3).....A default router will be chose from 
				the routers known to be up and that 
				have been configured.
		  dynamic(4)....ICMP router discovery as per RFC 
				1256 is performed and the router 
				with the highest preference level is 
				chosen as default router."
	DEFVAL { dynamic }
	::= { s5AgentInfo 5 }

s5AgIpRtrDiscoverySolicitMode OBJECT-TYPE
	SYNTAX	INTEGER {
		multicast(1),
		broadcast(2)
		}
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The router discovery solicitation mode to use
		when the default router selection mode is 
		dynamic. This solicitation mode determines 
		the IP address for ICMP router solicitations 
		(see RFC 1256):
		  multicast(1)..router solicitations are sent to 
				the all-routers multicast address 
				(224.0.0.2)
		  broadcast(2)..router solicitations are sent to 
				the limited broadcast address 
				(255.255.255.255)."
	DEFVAL { broadcast}
	::= { s5AgentInfo 6 }



-- Agent's Data Collection Table

s5AgDataCollectTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF S5AgDataCollectEntry 
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A table of control information and statistics
		for the data collection (promiscuous data
		capturing) per source of detection."
	::= { s5AgentInfo 7 }

s5AgDataCollectEntry OBJECT-TYPE
	SYNTAX	S5AgDataCollectEntry 
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A row in the data collection table.
		Entries can not be created or deleted
		via SNMP."
	INDEX	{ s5AgDataCollectIfIndex }
	::= { s5AgDataCollectTable 1 }

S5AgDataCollectEntry ::= SEQUENCE {
	s5AgDataCollectIfIndex INTEGER,
	s5AgDataCollectSnTimeStamp TimeTicks,
	s5AgDataCollectNetworkAddrStatus INTEGER
	}

s5AgDataCollectIfIndex OBJECT-TYPE
	SYNTAX	INTEGER (0..255)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"An integer value representing the source
		that collects data from the network. A value
		greater than zero is the index of the agent's
		interface on the NMM. This is the same value 
		as ifIndex for the interface. A value of zero
		indicates data collection via best available 
		efforts (other than NMM's interfaces)."
	::= { s5AgDataCollectEntry 1 }

s5AgDataCollectSnTimeStamp OBJECT-TYPE
	SYNTAX	TimeTicks
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The value of sysUpTime at the last time
		a node was added or deleted from the
		Show Node table."
	::= { s5AgDataCollectEntry 2 }


s5AgDataCollectNetworkAddrStatus OBJECT-TYPE
	SYNTAX	INTEGER {
		alwaysOff(1),
		on(2),
		off(3)
		}
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"A switch to enable or disable the collecting of 
		network layer addresses for the network address
		mapping table (s5CmNetAddrTable ).
		The following value is read-only:
		  alwaysOff(1)..data source is not capable of
				  collecting or decoding network
				  addresses

		The following values are read-write if the data
		source is capable of collecting network addresses:
		  on(2).........packet decoding is enabled
		  off(3)........packet decoding is disabled
				  or not supported."
	DEFVAL { on } -- if packet collection is possible
	::= { s5AgDataCollectEntry 3 }



-- Authentication Trap VarBinds


s5AgUnAuthIpAddr OBJECT-TYPE
	SYNTAX	IpAddress
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"This object contains the IP address of the last
		station that tried to access this agent with an
		invalid community string. This object is used as
		a VarBind in an Authentication Trap PDU. A get
		request will return the last value used, and will
		return the null address 0.0.0.0 if no IP
		authentication traps have been sent."
	::= { s5AgentInfo 8 }

s5AgUnAuthIpxAddr OBJECT-TYPE
	SYNTAX	IpxAddress
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"This object contains the IPX address of the last
		station that tried to access this agent with an
		invalid community string. This object is used as
		a VarBind in an Authentication Trap PDU. A get
		request will return the last value used, and will
		return the null address of all zeros if no IPX
		authentication traps have been sent."
	::= { s5AgentInfo 9 }

s5AgUnAuthComm OBJECT-TYPE
	SYNTAX	OCTET STRING (SIZE(0..20))
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"This object contains the community string of the
		last unauthenticated attempt to access this agent.
		This object is used as a VarBind in an Authentication
		Trap PDU. A get request will return the last value used,
		and will return the null string if no authentication
		traps have been sent."
	::= { s5AgentInfo 10 }

s5AgTrapFilterTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF S5AgTrapFilterEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Agent Trap filter configuration table."
        ::= { s5AgentInfo 11 }
 
s5AgTrapFilterEntry OBJECT-TYPE
        SYNTAX   S5AgTrapFilterEntry
        ACCESS   not-accessible
        STATUS   mandatory
        DESCRIPTION
                "A list of trap filter entries that determine the
                filtering of traps. For example, an instance of the
                s5AgtTrapFilterStatus will be named s5AgTrapFilterStatus.8"
        INDEX   { s5AgTrapFilterIndex }
        ::= { s5AgTrapFilterTable  1 }

S5AgTrapFilterEntry ::= SEQUENCE {
        s5AgTrapFilterIndex          INTEGER,
      	s5AgTrapFilterTrapOID        OBJECT IDENTIFIER,
        s5AgTrapFilterTrapInitiator1 INTEGER,
        s5AgTrapFilterTrapInitiator2 INTEGER,
        s5AgTrapFilterTrapInitiator3 INTEGER,
        s5AgTrapFilterStatus         INTEGER,
        s5AgTrapFilterDelayTime      INTEGER,
        s5AgTrapEntryStatus          INTEGER
        }

s5AgTrapFilterIndex OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "An index that uniquely identifies an entry in the
                s5AgTrapFilterTable."
        ::= { s5AgTrapFilterEntry 1 }
 
s5AgTrapFilterTrapOID OBJECT-TYPE
        SYNTAX  OBJECT IDENTIFIER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The OID of the trap.

                This variable is requried for row creation."    
        ::= { s5AgTrapFilterEntry  2 }

s5AgTrapFilterTrapInitiator1 OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "A value that determines the first condition for 
                filtering a trap.This entry is the value of the 
                first varbind for a particular trap in most cases.

                We need to specify every initiator that represents 
                the corresponding trap variable for each trap. 
                If the value of this initiator is 0 (wildcard or 
                don't care), it means that it can represent all 
                possible values for this initiator. The trap-filter 
                design and functional spec. provides a more detailed 
                explanation on this subject."
        ::= { s5AgTrapFilterEntry 3 }

s5AgTrapFilterTrapInitiator2 OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "A value that determines the second condition for 
                filtering a trap. This entry is the value of the 
                second varbind for most traps. If the value of 
                this initiator is 0 (wildcard or don't care), 
                it means that it can represent all possible values 
                for this initiator. If a trap has only one varbind, 
	        this entry should be set to 0."
        ::= { s5AgTrapFilterEntry 4 }

s5AgTrapFilterTrapInitiator3 OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "A value that determines the third condition for 
                filtering a trap. This entry is the value of the 
                third varbind for most traps. If the value of this 
                initiator is 0(wildcard or don't care), it means 
                that it can represent all possible values for this 
                initiator. If a trap has only one or two varbinds, 
                this entry should be set to 0."
        ::= { s5AgTrapFilterEntry 5 }
 
s5AgTrapFilterStatus OBJECT-TYPE
        SYNTAX  INTEGER {
                enabled(1),
                disabled(2)
                }    
        ACCESS  read-write
        STATUS      mandatory
        DESCRIPTION
                "Indicates whether this trap is enabled or not. 
                enabled(1) indicates that if this type of event 
                occurs, a trap that is generated will be queued 
                for transmit. disabled(2) indicates that if this 
                trap if generated, it will not be queued for 
                transmit and s5AgTrapFilterDelayTime is not valid."
        ::= { s5AgTrapFilterEntry  6 }
 
 
s5AgTrapFilterDelayTime OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The time delay period required to be met, between 
                each consecutive occurences of this event. Traps 
                recieved within this period will be dropped."
        ::= { s5AgTrapFilterEntry  7 }
 
s5AgTrapEntryStatus  OBJECT-TYPE
        SYNTAX  INTEGER {
                valid(1),
                createRequest(2),
                underCreation(3),
                invalid(4)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "A manager is restricted to change the state of an
                entry  base on the following table:
              
                                       create   under
                To:             valid  Request  Creation  invalid
                From:
                valid             OK       NO        OK       OK
                createRequest    N/A      N/A       N/A      N/A
                underCreation     OK       NO        OK       OK
                invalid           NO       NO        NO       OK
                nonExistent       NO       OK        NO       OK
              
                In the table above, it is not applicable to change 
                the state from createRequest to any other states.

                When the status of a table entry is set to the value 
                of invalid(4), the entry will be removed from the table. 
                If an entry has been in the underCreation(3) state for 
                more than 10 minutes, it will be set to invalid(4) and 
	        subsequently removed from the table. 

                This variable is requried for row creation."    
        ::= { s5AgTrapFilterEntry 8 }
 

-- change '_' to '-' for enum named label
-- yyang 11/30/98
s5AgTrapFilterGlobalStatus    OBJECT-TYPE
        SYNTAX  INTEGER{
                enable-all(1),
                disable-all(2),
                enable-all-and-use-table(3),
                disable-all-and-use-table(4)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This value is the status of all the traps that 
                supported by this trap-filter system.

                If the value is 1 (enable all) , all traps in the 
                system are enabled. If the value is 2 (disable all), 
                all traps in the system are disabled. If the value 
                is 3 (enable-all-and-use-table) all traps are enabled 
                except for traps that are disabled in the 
                s5AgTrapFilterTable are disabled. If the value is 4 
                (disable-all-and-use-table) all traps are disabled 
                except for traps that are enabled in the 
                s5AgTrapFilterTable are enabled."
        ::= { s5AgentInfo 12 }
 



-- Trap Receiver Table

s5AgTrpRcvrMaxEnt OBJECT-TYPE
	SYNTAX	INTEGER (0..255)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The maximum number of rows in the trap
		receiver table."
	::= { s5AgentMgmt 1 }

s5AgTrpRcvrCurEnt OBJECT-TYPE
	SYNTAX	INTEGER (0..255)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The current number of rows in the trap
		receiver table."
	::= { s5AgentMgmt 2 }

s5AgTrpRcvrNext OBJECT-TYPE
	SYNTAX	INTEGER (0..255)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The index of the next available row to be
		created in the trap receiver table. A value
		of zero means that the table is full and no
		more rows can be added."
	::= { s5AgentMgmt 3 }

s5AgTrpRcvrTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF S5AgTrpRcvrEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A table of managers which to send traps."
	::= { s5AgentMgmt 4 }

s5AgTrpRcvrEntry OBJECT-TYPE
	SYNTAX	S5AgTrpRcvrEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A row in the trap receiver table.
		The column s5AgTrpRcvrStatus is used to create
		and delete rows in the table. Creation requires
		a SET PDU with objects s5AgTrpRcvrStatus,
		s5AgTrpRcvrAddrType, s5AgTrpRcvrNetAddr,
		and s5AgTrpRcvrComm for the new row."
	INDEX	{ s5AgTrpRcvrIndx }
	::= { s5AgTrpRcvrTable 1 }

S5AgTrpRcvrEntry ::= SEQUENCE {
	s5AgTrpRcvrIndx INTEGER,
	s5AgTrpRcvrStatus INTEGER,
	s5AgTrpRcvrAddrType INTEGER,
	s5AgTrpRcvrNetAddr OCTET STRING,
	s5AgTrpRcvrComm OCTET STRING,
	s5AgTrpRcvrAgeTime TimeIntervalSec
	}

s5AgTrpRcvrIndx OBJECT-TYPE
	SYNTAX	INTEGER (1..255)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The index of the row in the table."
	::= { s5AgTrpRcvrEntry 1 }

s5AgTrpRcvrStatus OBJECT-TYPE
	SYNTAX	INTEGER {
		other(1),
		valid(2),
		ignore(3),
		delete(4),
		create(5)
		}
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"This object is used to create and
		delete rows in the table and control
		if they are used. The values
		that can be written are:
		  valid(2)....makes an existing row
		                valid - can only be
		                written to change the
		                value from ignore(3)
		  ignore(3)...don't use this entry to
		                send traps to at this time
		  delete(4)...deletes the row
		  create(5)...creates a new row - only
		                value that can be used to
		                create a row in the table

		If the row exists, then a SET with
		value of create(5) returns error
		'badValue'. Deleted rows go away
		immediately. The following values
		can be returned on reads:
		  other(1)....some other case
		  valid(2)....the row exists and is valid
		  ignore(3)...don't use this entry to
		                send traps to at this time"
	::= { s5AgTrpRcvrEntry 2 }

s5AgTrpRcvrAddrType OBJECT-TYPE
	SYNTAX	INTEGER {
		ip(1),
		ipx(2)
		}
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The type of address that is stored in
		the object s5AgTrpRcvrNetAddr. The
		value is:
		  ip(1)....IP address
		  ipx(2)...IPX address.

		Note:   When changing the value of this object
		        with an SNMP SET request, the SET PDU
 		        must also specify a value for the
		        s5AgTrpRcvrNetAddr object."
	::= { s5AgTrpRcvrEntry 3 }

s5AgTrpRcvrNetAddr OBJECT-TYPE
	SYNTAX	OCTET STRING
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The network address (in network order) for
		SNMP manager that is to receive the trap."
	::= { s5AgTrpRcvrEntry 4 }

s5AgTrpRcvrComm OBJECT-TYPE
	SYNTAX	OCTET STRING (SIZE(0..20))
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Community string to use."
	::= { s5AgTrpRcvrEntry 5 }

s5AgTrpRcvrAgeTime OBJECT-TYPE
	SYNTAX	TimeIntervalSec
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The time interval used to age entries out
		of the trap receiver table. The default
		value if not specified will be 0, or infinite,
		never to be aged out."
	DEFVAL { 0 }
	::= { s5AgTrpRcvrEntry 6 }


-- Last Remote Login Management 

s5AgRemoteLoginMgmt OBJECT IDENTIFIER ::= { s5AgentMgmt 5 }

s5AgRemoteLoginIp OBJECT-TYPE
	SYNTAX	IpAddress
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"This value indicates the last IP address remote login to this system.  "
	::= { s5AgRemoteLoginMgmt 1 }

s5AgRemoteLoginStatus OBJECT-TYPE
	SYNTAX	INTEGER {
               statusUnknown (1),
               successful (2),
               passwordFail (3),
               loginTimeout (4),
               loginInactivityTimeout(5),
               telnetSessionExisted (6),
               nonAllowedIPaddr (7),
               localConsoleBusy (8),
               excessiveLoginFail (9),
               accessPermissionOff (10),
	       loginLogout (11)
            } 
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"This value indicates the status of remote login to this system.  "
	::= { s5AgRemoteLoginMgmt 2 }

END