#-MIBFILE: cpqstat.mib CPQEXTERNAL-MIB DEFINITIONS ::= BEGIN compaq OBJECT IDENTIFIER ::= { enterprises 232 } DisplayString ::= OCTET STRING PhysAddress ::= OCTET STRING cpqExternalMgmt OBJECT IDENTIFIER ::= { compaq 17 } cpqExMibRev OBJECT IDENTIFIER ::= { cpqExternalMgmt 1 } cpqExComponent OBJECT IDENTIFIER ::= { cpqExternalMgmt 2 } cpqExInterface OBJECT IDENTIFIER ::= { cpqExComponent 1 } cpqExStatus OBJECT IDENTIFIER ::= { cpqExComponent 2 } cpqExOsCommon OBJECT IDENTIFIER ::= { cpqExInterface 4 } cpqExMibRevMajor OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The Major Revision level of the MIB. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information, correct interpretation of data may require a MIB document with the same major revision level." ::= { cpqExMibRev 1 } cpqExMibRevMinor OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The Minor Revision level of the MIB. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occurred." ::= { cpqExMibRev 2 } cpqExMibCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The overall condition. This object represents the overall status of the external MIB management system represented by this MIB. This status is the aggregate of all external (non-Compaq enterprise) MIBs supported by this agent." ::= { cpqExMibRev 3 } cpqExOsCommonPollFreq OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The Insight Agent's polling frequency. The frequency, in seconds, at which the Insight Agent requests information from. A frequency of zero indicates that the Insight Agent retrieves the information upon request of a management station, it does not poll at a specific interval. If the poll frequency is zero (0) all attempts to write to this object will fail. If the poll frequency is non-zero, setting this value will change the polling frequency of the Insight Agent. Setting the poll frequency to zero will always fail, an agent may also choose to fail any request to change the poll frequency to a value that would severely impact system performance." ::= { cpqExOsCommon 1 } cpqExOsCommonModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqExOsCommonModuleEntry ACCESS read-only STATUS optional DESCRIPTION "A table of software modules that provide an interface to the device this MIB describes." ::= { cpqExOsCommon 2 } cpqExOsCommonModuleEntry OBJECT-TYPE SYNTAX CpqExOsCommonModuleEntry ACCESS read-only STATUS optional DESCRIPTION "A description of a software modules that provide an interface to the device this MIB describes." INDEX { cpqExOsCommonModuleIndex } ::= { cpqExOsCommonModuleTable 1 } cpqExOsCommonModuleEntry ::= SEQUENCE { cpqExOsCommonModuleIndex INTEGER, cpqExOsCommonModuleName DisplayString, cpqExOsCommonModuleVersion DisplayString, cpqExOsCommonModuleDate OCTET STRING, cpqExOsCommonModulePurpose DisplayString } cpqExOsCommonModuleIndex OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS optional DESCRIPTION "A unique index for this module description." ::= { cpqExOsCommonModuleEntry 1 } cpqExOsCommonModuleName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS optional DESCRIPTION "The module name." ::= { cpqExOsCommonModuleEntry 2 } cpqExOsCommonModuleVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..5)) ACCESS read-only STATUS optional DESCRIPTION "The module version in XX.YY format. Where XX is the major version number and YY is the minor version number. This field will be a null (size 0) string if the agent cannot provide the module version." ::= { cpqExOsCommonModuleEntry 3 } cpqExOsCommonModuleDate OBJECT-TYPE SYNTAX OCTET STRING (SIZE(7)) ACCESS read-only STATUS optional DESCRIPTION "The module date. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) This field will be set to year = 0 if the agent cannot provide the module date. The hour, minute, and second field will be set to zero (0) if they are not relevant. The year field is set with the most significant octet first." ::= { cpqExOsCommonModuleEntry 4 } cpqExOsCommonModulePurpose OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS optional DESCRIPTION "The purpose of the module described in this entry." ::= { cpqExOsCommonModuleEntry 5 } cpqExExternalCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The condition of the external mib status table as a whole." ::= { cpqExStatus 1 } cpqExExternalStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqExExternalStatusEntry ACCESS read-only STATUS mandatory DESCRIPTION "A list of status entries for external MIBs." ::= { cpqExStatus 2 } cpqExExternalStatusEntry OBJECT-TYPE SYNTAX CpqExExternalStatusEntry ACCESS read-only STATUS mandatory DESCRIPTION "A list of status OIDs used to check external MIB status values. The table also lists how the values will be interpreted." INDEX { cpqExExternalStatusIndex } ::= { cpqExExternalStatusTable 1 } cpqExExternalStatusEntry ::= SEQUENCE { cpqExExternalStatusIndex INTEGER, cpqExExternalStatusInterval INTEGER, cpqExExternalStatusVariable OBJECT IDENTIFIER, cpqExExternalStatusValid INTEGER, cpqExExternalStatusValue INTEGER, cpqExExternalStatusCondition INTEGER, cpqExExternalStatusOkValues DisplayString, cpqExExternalStatusDegradedValues DisplayString, cpqExExternalStatusFailedValues DisplayString } cpqExExternalStatusIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An index that uniquely identifies an entry in the cpqExExternalStatusTable table." ::= { cpqExExternalStatusEntry 1 } cpqExExternalStatusInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The interval, in seconds, between consecutive samples of the data." ::= { cpqExExternalStatusEntry 2 } cpqExExternalStatusVariable OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Counter, Gauge, or TimeTicks) may be sampled." ::= { cpqExExternalStatusEntry 3 } cpqExExternalStatusValid OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This value will be true(2) if the object identifier (cpqExExternalStatusVariable) was successfully retrieved during the last sampling period. If the object identifier was not available or could not be queried, the value will be false(1)." ::= { cpqExExternalStatusEntry 4 } cpqExExternalStatusValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of the object identifier (cpqExExternalStatusVariable) during the last sampling period. The value during the current sampling period is not made available until the period is completed." ::= { cpqExExternalStatusEntry 5 } cpqExExternalStatusCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The condition of the external mib status variable. If the value does not exist or was of an invalid data type, this will be set to other(1). The value will also be set to other(1) if the data returned does not match any of the defined values in the cpqExExternalStatusOkValues, cpqExExternalStatusDegradedValues, or cpqExExternalStatusFailedValues as defined." ::= { cpqExExternalStatusEntry 6 } cpqExExternalStatusOkValues OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) ACCESS read-only STATUS mandatory DESCRIPTION "This is a textual list of possible values which can be compared to the actual value retrieved from cpqExExternalStatusVariable during the last sampling period. This string value will be composed of a comma separated list of signed integer values with an optional range indicated by two integers separated by two periods. Example: -1,2..4,11 The above would interpret the values -1, 2, 3, 4, and 11 as indicating an Ok condition." ::= { cpqExExternalStatusEntry 7 } cpqExExternalStatusDegradedValues OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) ACCESS read-only STATUS mandatory DESCRIPTION "This is a textual list of possible values which can be compared to the actual value retrieved from cpqExExternalStatusVariable during the last sampling period. This string value will be composed of a comma separated list of signed integer values with an optional range indicated by two integers separated by two periods. Example: -1,2..4,11 The above would interpret the values -1, 2, 3, 4, and 11 as indicating a Degraded condition." ::= { cpqExExternalStatusEntry 8 } cpqExExternalStatusFailedValues OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) ACCESS read-only STATUS mandatory DESCRIPTION "This is a textual list of possible values which can be compared to the actual value retrieved from cpqExExternalStatusVariable during the last sampling period. This string value will be composed of a comma separated list of signed integer values with an optional range indicated by two integers separated by two periods. Example: -1,2..4,11 The above would interpret the values -1, 2, 3, 4, and 11 as indicating a Failed condition." ::= { cpqExExternalStatusEntry 9 } END