-- Revision 1.6 -- Copyright 2000 Compaq Inc. -- All rights reserved. COMPAQ-AGENT-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB compaq-common-mgmt FROM COMPAQ-ID-REC-MIB cpqRackAssetIndex, cpqRackCommonEnclosureRack, cpqRackCommonEnclosureIndex, cpqRackNetConnectorRack, cpqRackNetConnectorChassis, cpqRackNetConnectorIndex FROM CPQRACK-MIB ; -- agentGeneralMgmt MODULE-IDENTITY -- LAST-UPDATED "0007150000Z" -- ORGANIZATION "COMPAQ, Inc." -- CONTACT-INFO -- " COMPAQ Customer Service -- -- Postal: -- -- Tel: -- -- E-mail: " -- DESCRIPTION -- "The Structure of Common Management Information for the -- Compaq enterprise." -- ::= { compaq-common-mgmt 1 } agentGeneralMgmt OBJECT IDENTIFIER ::= { compaq-common-mgmt 1 } agentBasicInfo OBJECT IDENTIFIER ::= { agentGeneralMgmt 1 } agentBasicConfig OBJECT IDENTIFIER ::= { agentGeneralMgmt 2 } agentIpProtoConfig OBJECT IDENTIFIER ::= { agentGeneralMgmt 3 } agentIpTrapManager OBJECT IDENTIFIER ::= { agentGeneralMgmt 4 } agentConsoleModeManager OBJECT IDENTIFIER ::= { agentGeneralMgmt 5 } agentSlipModeManager OBJECT IDENTIFIER ::= { agentGeneralMgmt 6 } agentSNTP OBJECT IDENTIFIER ::= { agentGeneralMgmt 7 } agentDST OBJECT IDENTIFIER ::= { agentGeneralMgmt 8 } agentSwitchCommonMgmt OBJECT IDENTIFIER ::= { compaq-common-mgmt 3 } agentSwitchCube OBJECT IDENTIFIER ::= { agentSwitchCommonMgmt 1 } agentSwitchPowerSupply OBJECT IDENTIFIER ::= { agentSwitchCommonMgmt 2 } agentSwitchFan OBJECT IDENTIFIER ::= { agentSwitchCommonMgmt 3 } agentSwitchTempSensor OBJECT IDENTIFIER ::= { agentSwitchCommonMgmt 4 } -- **************** -- agentBasicInfo * -- **************** -- agentBasicInfo OBJECT IDENTIFIER ::= { agentGeneralMgmt 1 } agentMgmtProtocolCapability OBJECT-TYPE SYNTAX INTEGER { other(1), snmp-ip(2), snmp-ipx(3), snmp-ip-ipx(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The network management protocol(s) supported by this agent." ::= { agentBasicInfo 1 } -- ************************* -- agentMibcapabilityTable * -- ************************* agentMibCapabilityTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentMibCapabilityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of MIB capability entries supported by this agent." ::= { agentBasicInfo 2 } agentMibCapabilityEntry OBJECT-TYPE SYNTAX AgentMibCapabilityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A MIB capability entry contains objects describing a particular MIB supported by this agent." INDEX { agentMibCapabilityIndex } ::= { agentMibCapabilityTable 1 } AgentMibCapabilityEntry ::= SEQUENCE { agentMibCapabilityIndex INTEGER, agentMibCapabilityDescr DisplayString, agentMibCapabilityVersion INTEGER, agentMibCapabilityType INTEGER } agentMibCapabilityIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A list of agentMibCapabilityDescr entries." ::= { agentMibCapabilityEntry 1 } agentMibCapabilityDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..35)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the MIB supported by the agent." ::= { agentMibCapabilityEntry 2 } agentMibCapabilityVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The version of the MIB specified in this entry." ::= { agentMibCapabilityEntry 3 } agentMibCapabilityType OBJECT-TYPE SYNTAX INTEGER { other(1), standard(2), proprietary(3), experiment(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the MIB specified in this entry." ::= { agentMibCapabilityEntry 4 } agentStatusConsoleInUse OBJECT-TYPE SYNTAX INTEGER { other(1), in-use(2), not-in-use(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates whether console is currently in-use." ::= { agentBasicInfo 3 } agentStatusSaveCfg OBJECT-TYPE SYNTAX INTEGER { other(1), proceeding(2), completed(3), changed-not-save(4), failed(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the status of the device configuration. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. proceeding(2) - the device configuration is being currently saved into the NV-RAM. completed(3) ¡V all of the device configuration parameters have been saved into NV-RAM. changed-not-save(4)¡V some of the device configuration parameters have been changed but not saved into NV-RAM. failed(5) - The process to save device configuration is failed." ::= { agentBasicInfo 4 } agentSwitchMfgDate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The switch manufacturing date and time." ::= { agentBasicInfo 5 } agentSwitchFirmwareMfgDate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The switch firmware manufacturing date and time." ::= { agentBasicInfo 6 } -- agentSwitchSlotID OBJECT-TYPE -- SYNTAX INTEGER{ -- other(1), -- slotA(2), -- slotB(3) -- } -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "The slot ID of the switch" -- ::= { agentBasicInfo 7 } -- agentSwitchSafeModeStatus OBJECT-TYPE -- SYNTAX INTEGER{ -- false(1), -- true(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The safe mode status of the switch" -- ::= { agentBasicInfo 8 } -- ****************** -- agentBasicConfig * -- ****************** -- agentBasicConfig OBJECT IDENTIFIER ::= { agentGeneralMgmt 2 } agentBscSwFileTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentBscSwFileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of MIB Basic Config entries supported file Update by this agent." ::= { agentBasicConfig 1 } agentBscSwFileEntry OBJECT-TYPE SYNTAX AgentBscSwFileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A basic config entry contains objects describing a particular MIB supported by this agent." INDEX { agentBscSwFileIndex } ::= { agentBscSwFileTable 1 } AgentBscSwFileEntry ::= SEQUENCE { agentBscSwFileIndex INTEGER, agentBscSwFileDscr DisplayString, agentBscSwFileAddr IpAddress, agentBscSwFileTransferType INTEGER, agentBscSwFile DisplayString, agentBscSwFileLocateId INTEGER, agentBscSwFileLoadType INTEGER, agentBscSwFileCtrl INTEGER, agentBscFileServerTftpPort INTEGER, agentBscSwFileTime DisplayString, agentBscSwFileStatus DisplayString } agentBscSwFileIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The table index for the file entry" ::= { agentBscSwFileEntry 1 } agentBscSwFileDscr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "The description for the purpose of the software file in this entry. Note: For system which does not support change of this object, setting value to this object will cause the system to return bad-value error message. " ::= { agentBscSwFileEntry 2 } agentBscSwFileAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address where the File to be downloaded is located, or the IP address where the file will be uploaded to." ::= { agentBscSwFileEntry 3 } agentBscSwFileTransferType OBJECT-TYPE SYNTAX INTEGER { other(1), network-load(2), out-of-band-load(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The channel through which the file will be downloaded or uploaded. Note: For system which does not support all channels, setting value to the unsupported channel will cause the system to return bad-value error message. " ::= { agentBscSwFileEntry 4 } agentBscSwFile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the file to be downloaded from the TFTP server, or to be uploaded to." ::= { agentBscSwFileEntry 5 } agentBscSwFileLocateId OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "This object describes the type of the file. runtime-code(1), log-file(2), cfg-file(3) Note: For system which does not support change of this object, setting value to this object will cause the system to return bad-value error message. " ::= { agentBscSwFileEntry 6 } agentBscSwFileLoadType OBJECT-TYPE SYNTAX INTEGER { other(1), upload(2), download(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object provides the user to select download or upload function for the file. Note: For system which does not support change of this object, setting value to this object will cause the system to return bad-value error message. " ::= { agentBscSwFileEntry 7 } agentBscSwFileCtrl OBJECT-TYPE SYNTAX INTEGER { other(1), inactive(2), start(3), delete(4), create-and-go(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object provides the user to download runtime software. The setting will take effect when the system is restart. See Note(1) below Note: For system which does not support change of this object to some value, setting object to these values cause the system to return bad-value error message. " ::= { agentBscSwFileEntry 8 } agentBscFileServerTftpPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The IP port used by the TFTP server." ::= { agentBscSwFileEntry 9 } agentBscSwFileTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "Configuration/firmware file last saved Date/Time, NULL if unknown. Unknown if time has not been set by SNTP or manual entry when the configuration/firmware file was saved " ::= { agentBscSwFileEntry 10 } agentBscSwFileStatus OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-only STATUS mandatory DESCRIPTION "Status of last download attempt. See trap switchFileInvalid. Read-only initialized to NULL" ::= { agentBscSwFileEntry 11 } agentFileTransfer OBJECT-TYPE SYNTAX INTEGER { other(1), start(2), start-and-reset(3), noaction(4) } ACCESS read-write STATUS obsolete DESCRIPTION "This object will execute the download or upload action. If start(2), it will begin to download/upload, but no reset as follow. If start-and-reset(3), then the reset will active after download or upload. No action if(4). Note: Because these funiction will be limited by the system support. Some of the select item will invalid. When one of the item user select,it will response with bad-value status." ::= { agentBasicConfig 2 } agentSystemReset OBJECT-TYPE SYNTAX INTEGER { other(1), cold-start(2), warm-start(3), no-reset(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates the agent system reset state. Setting this object to no-reset(4) has no effect. Setting this object to cold-start(2) or warm-start(3) will reset the agent. The agent always returns no-reset(4) when this object is read." ::= { agentBasicConfig 3 } agentRs232PortConfig OBJECT-TYPE SYNTAX INTEGER { other(1), console(2), out-of-band(3), notAvail(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates the RS-232C mode while device restart." ::= { agentBasicConfig 4 } agentOutOfBandBaudRateConfig OBJECT-TYPE SYNTAX INTEGER { other(1), baudRate-2400 (2), baudRate-9600 (3), baudRate-19200(4), baudRate-38400(5), baudRate-115200(6) } ACCESS read-write STATUS obsolete DESCRIPTION "This object allows user to specify out_of_band baud rate. It will take effect when the system is restart. Note: Because these funiction will be limited by the system support. Some of the select item will invalid. When one of the item user select,it will response with bad-value status. " ::= { agentBasicConfig 5 } agentSaveCfg OBJECT-TYPE SYNTAX INTEGER { other(1), idle(2), set(3) } ACCESS read-write STATUS mandatory DESCRIPTION "As the object is set to 'set(3)', the current device configuration will be saved into to NV-RAM." ::= { agentBasicConfig 6 } -- *********************** -- agentIpProtocolConfig * -- *********************** -- agentIpProtoConfig OBJECT IDENTIFIER ::= { agentGeneralMgmt 3 } agentIpNumOfIf OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of IP interfaces supported by this agent." ::= { agentIpProtoConfig 1 } agentIpTftpServerAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS obsolete DESCRIPTION "The IP Address of TFTP Server." ::= { agentIpProtoConfig 2 } agentIpGetIpFrom OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), bootp(3), dhcp(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether the agent get its system IP address from Bootp/DHCP server at start up." ::= { agentIpProtoConfig 3 } -- End of agentIpIfTable --------- -- ************************ -- agentIptrapMangerTable * -- ************************ -- agentIpTrapManager OBJECT IDENTIFIER ::= { agentGeneralMgmt 4 } agentIpTrapManagerTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpTrapManagerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of trap managers to which SNMP traps will be sent." ::= { agentIpTrapManager 1 } agentIpTrapManagerEntry OBJECT-TYPE SYNTAX AgentIpTrapManagerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the particular trap manager settings." INDEX { agentIpTrapManagerIpAddr } ::= { agentIpTrapManagerTable 1 } AgentIpTrapManagerEntry ::= SEQUENCE { agentIpTrapManagerIpAddr IpAddress, agentIpTrapManagerComm DisplayString, agentIpTrapManagerStatus INTEGER } agentIpTrapManagerIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address where SNMP traps will be destined for" ::= { agentIpTrapManagerEntry 1 } agentIpTrapManagerComm OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "The community string used to encode SNMP trap packet to be sent to the trap manager." ::= { agentIpTrapManagerEntry 2 } agentIpTrapManagerStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether or not the trap should be sent to this trap manager." ::= { agentIpTrapManagerEntry 3 } -- ***************************************************** -- Add for Slip_Console mode swtich 11-9-2001 WindChen * -- ***************************************************** -- agentConsoleModeManager OBJECT IDENTIFIER ::= { agentGeneralMgmt 5 } agentConsoleModeManagerDataBits OBJECT-TYPE SYNTAX INTEGER { other(1), bits-7(2), bits-8(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The DataBits for console mode, If the agentRs232PortConfig change to console mode then the device will use this group to make a setup for console value and agentSlipModeManager group will deactive automatically. " ::= { agentConsoleModeManager 1 } agentConsoleModeManagerStopBits OBJECT-TYPE SYNTAX INTEGER { other(1), stopbits-1(2), stopbits-2(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The Stop Bits for console mode " ::= { agentConsoleModeManager 2 } agentConsoleModeManagerParity OBJECT-TYPE SYNTAX INTEGER { none(1), odd(2), even(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The Parity for console mode, If the agentRs232PortConfig change to console mode then the device will use this group to make a setup for console value and agentSlipModeManager group will deactive automatically. " ::= { agentConsoleModeManager 3 } agentConsoleModeManagerBaudRate OBJECT-TYPE SYNTAX INTEGER { other(1), baudRate-2400(2), baudRate-9600(3), baudRate-19200(4), baudRate-38400(5), baudRate-57200(6), baudRate-115200(7) } ACCESS read-write STATUS mandatory DESCRIPTION "The transmit rate for console mode." ::= { agentConsoleModeManager 4 } -- ******************* -- Slip Mode Manager * -- ******************* -- agentSlipModeManager OBJECT IDENTIFIER ::= { agentGeneralMgmt 6 } agentSlipModeManagerLocalIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The Local IP address for slip mode, If the agentRs232PortConfig change to out-of-band mode then the device will use this group to make a setup for slip value and agentConsoleModeManager group will deactive automatically. " ::= { agentSlipModeManager 1 } agentSlipModeManagerRemoteIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The Remote IP address for slip mode " ::= { agentSlipModeManager 2 } agentSlipModeManagerMTU OBJECT-TYPE SYNTAX INTEGER { other(1), mtu-1006(2), mtu-1500(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The MTU Value for Slip Mode " ::= { agentSlipModeManager 3 } agentSlipModeManagerBaudRate OBJECT-TYPE SYNTAX INTEGER { other(1), baudRate-2400(2), baudRate-9600(3), baudRate-19200(4), baudRate-38400(5), baudRate-57200(6), baudRate-115200(7) } ACCESS read-write STATUS mandatory DESCRIPTION "The MTU Value for Slip Mode " ::= { agentSlipModeManager 4 } -- ************************ -- agentSNTP * -- ************************ -- agentSNTP OBJECT IDENTIFIER ::= { agentGeneralMgmt 7 } agentSNTPState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object enable/disable the SNTP function." ::= { agentSNTP 1 } agentSNTPTimeSource OBJECT-TYPE SYNTAX INTEGER{ system(0), server1(1), server2(2) } ACCESS read-only STATUS mandatory DESCRIPTION "the SNTP server status for time source changing" ::= { agentSNTP 2 } agentSNTPServer1IPAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Configure the SNTP server #1 IP address" ::= { agentSNTP 3 } agentSNTPServer2IPAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Configure the SNTP server #2 IP address" ::= { agentSNTP 4 } agentSNTPTimeZone OBJECT-TYPE SYNTAX INTEGER (-779..839) ACCESS read-write STATUS mandatory DESCRIPTION "Local time offset in minutes from GMT." ::= { agentSNTP 5 } agentSNTPPollInterval OBJECT-TYPE SYNTAX INTEGER (30..99999) ACCESS read-write STATUS mandatory DESCRIPTION "Update time in seconds from SNTP server." -- DEFVAL { 1024 } ::= { agentSNTP 6 } agentSNTPCurrentTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "the mandatory network time was got from the SNTP server" ::= { agentSNTP 7 } agentSNTPUpTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The time (in second) since the network management portion of the system was last re-initialized. It is the same as sysUptime." ::= { agentSNTP 8 } agentSNTPBootTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The boot time of the switch is equal to subtract systemUpTime from agentSNTPNetworkTime" ::= { agentSNTP 9 } -- *********** -- agentDST * -- *********** -- agentDST OBJECT IDENTIFIER ::= { agentGeneralMgmt 8 } agentDSTStatus OBJECT-TYPE SYNTAX INTEGER{ disable(1), repeating(2), annual(3) } ACCESS read-write STATUS mandatory DESCRIPTION "An indication of whether the DST(Daylight Saving Time) feature is enabled on this device. When this object is set to repeating(2), or annual(3) then all the other objects are set to default values. When this object is set to disable(1), then all the other objects are not instantiated and the DST feature is disabled" ::= { agentDST 1 } agentDSTOffset OBJECT-TYPE SYNTAX INTEGER ( 0 .. 1440) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object indicates number of minutes to add or to subtract during DST. This object is not instantiated when agentDSTStatus object is set to false." ::= { agentDST 2 } agentDSTRepeatingStartMonth OBJECT-TYPE SYNTAX INTEGER (1 .. 12) ACCESS read-write STATUS mandatory DESCRIPTION "the repeating start month (January = 1, .., Decenber = 12)" ::= { agentDST 3 } agentDSTRepeatingStartWhichDay OBJECT-TYPE SYNTAX INTEGER (0 .. 4) ACCESS read-write STATUS mandatory DESCRIPTION "WhichDay means 0 = last week 1 = 1st week 2 = 2nd week 3 = 3th week 4 = 4th week " ::= { agentDST 4 } agentDSTRepeatingStartDayOfWeek OBJECT-TYPE SYNTAX INTEGER (1 .. 7 ) ACCESS read-write STATUS mandatory DESCRIPTION "Day Of Week Sun = 1 Mon = 2 Tue = 3 Wed = 4 Thu = 5 Fri = 6 Sat = 7 " ::= { agentDST 5 } agentDSTRepeatingStartHour OBJECT-TYPE SYNTAX INTEGER (0 .. 23) ACCESS read-write STATUS mandatory DESCRIPTION "the hour of the DST Repeating Start Day of Week" ::= { agentDST 6 } agentDSTRepeatingStartMinute OBJECT-TYPE SYNTAX INTEGER (0 .. 59) ACCESS read-write STATUS mandatory DESCRIPTION "the minute of the DST Repeating Start Hour" ::= { agentDST 7 } agentDSTRepeatingEndMonth OBJECT-TYPE SYNTAX INTEGER (1 .. 12) ACCESS read-write STATUS mandatory DESCRIPTION "the repeating end month (January = 1, .., Decenber = 12)" ::= { agentDST 8 } agentDSTRepeatingEndWhichDay OBJECT-TYPE SYNTAX INTEGER (0 .. 4) ACCESS read-write STATUS mandatory DESCRIPTION "WhichDay means 0 = last week 1 = 1st week 2 = 2nd week 3 = 3th week 4 = 4th week " ::= { agentDST 9 } agentDSTRepeatingEndDayOfWeek OBJECT-TYPE SYNTAX INTEGER (1 .. 7) ACCESS read-write STATUS mandatory DESCRIPTION "Day Of Week Sun = 1 Mon = 2 Tue = 3 Wed = 4 Thu = 5 Fri = 6 Sat = 7 " ::= { agentDST 10 } agentDSTRepeatingEndHour OBJECT-TYPE SYNTAX INTEGER (0 .. 23) ACCESS read-write STATUS mandatory DESCRIPTION "the hour of the DST Repeating End Day of Week" ::= { agentDST 11 } agentDSTRepeatingEndMinute OBJECT-TYPE SYNTAX INTEGER (0 .. 59) ACCESS read-write STATUS mandatory DESCRIPTION "the minute of the DST Repeating End Hour" ::= { agentDST 12 } agentDSTAnnualStartMonth OBJECT-TYPE SYNTAX INTEGER (1 .. 12) ACCESS read-write STATUS mandatory DESCRIPTION "the annual start month (January = 1, .., Decenber = 12)" ::= { agentDST 13 } agentDSTAnnualStartDayOfMonth OBJECT-TYPE SYNTAX INTEGER (1 .. 31) ACCESS read-write STATUS mandatory DESCRIPTION "the day of annual start month" ::= { agentDST 14 } agentDSTAnnualStartHour OBJECT-TYPE SYNTAX INTEGER (0 .. 23) ACCESS read-write STATUS mandatory DESCRIPTION "the hour of the annual start day" ::= { agentDST 15 } agentDSTAnnualStartMinute OBJECT-TYPE SYNTAX INTEGER (0 .. 59) ACCESS read-write STATUS mandatory DESCRIPTION "the minute of the annual start hour" ::= { agentDST 16 } agentDSTAnnualEndMonth OBJECT-TYPE SYNTAX INTEGER (1 .. 12) ACCESS read-write STATUS mandatory DESCRIPTION "the annual end month (January = 1, .., Decenber = 12)" ::= { agentDST 17 } agentDSTAnnualEndDayOfMonth OBJECT-TYPE SYNTAX INTEGER (1 .. 31) ACCESS read-write STATUS mandatory DESCRIPTION "the day of annual end month" ::= { agentDST 18 } agentDSTAnnualEndHour OBJECT-TYPE SYNTAX INTEGER (0 .. 23) ACCESS read-write STATUS mandatory DESCRIPTION "the hour of annual end day of month" ::= { agentDST 19 } agentDSTAnnualEndMinute OBJECT-TYPE SYNTAX INTEGER (0 .. 59) ACCESS read-write STATUS mandatory DESCRIPTION "the minute of annual end hour" ::= { agentDST 20 } -- *********************** -- agentSwitchCubeTable * -- *********************** -- agentSwitchCube OBJECT IDENTIFIER ::= { agentSwitchCommonMgmt 1 } agentSwitchCubeTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentSwitchCubeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of cube information." ::= { agentSwitchCube 1 } agentSwitchCubeEntry OBJECT-TYPE SYNTAX AgentSwitchCubeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A switch cube description." INDEX { cpqRackAssetIndex, cpqRackCommonEnclosureRack, cpqRackCommonEnclosureIndex, cpqRackNetConnectorRack, cpqRackNetConnectorChassis, cpqRackNetConnectorIndex, agentSwitchCubeType } ::= { agentSwitchCubeTable 1 } AgentSwitchCubeEntry ::= SEQUENCE { agentSwitchCubeType INTEGER, agentSwitchCubeSpareName DisplayString, agentSwitchCubeSparePartNumber DisplayString } agentSwitchCubeType OBJECT-TYPE SYNTAX INTEGER { other(1), dualTSX(2), quadT(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the type of this instance of cube. This value will be one of the following: other(1) Cube type could not be determined. dualTSX(2) Switch Dual Base-T plus Dual LC Fiber Interconnect Module. quadT(3) Switch Quad Base-T Copper Interconnect Module. " ::= { agentSwitchCubeEntry 1 } agentSwitchCubeSpareName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the cube. The string will be empty if the cube does not report the name or it could not be determined." ::= { agentSwitchCubeEntry 2 } agentSwitchCubeSparePartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The spare part number of the cube. The string will be empty if the enclosure does not report this function." ::= { agentSwitchCubeEntry 3 } -- ***************************** -- agentSwitchPowerSupplyTable * -- ***************************** -- agentSwitchPowerSupply OBJECT IDENTIFIER ::= { agentSwitchCommonMgmt 2 } agentSwitchPowerSupplyTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentSwitchPowerSupplyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of power supply information." ::= { agentSwitchPowerSupply 1 } agentSwitchPowerSupplyEntry OBJECT-TYPE SYNTAX AgentSwitchPowerSupplyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A switch power supply description." INDEX { cpqRackAssetIndex, cpqRackCommonEnclosureRack, cpqRackCommonEnclosureIndex, cpqRackNetConnectorRack, cpqRackNetConnectorChassis, cpqRackNetConnectorIndex, agentSwitchPowerSupplyIndex } ::= { agentSwitchPowerSupplyTable 1 } AgentSwitchPowerSupplyEntry ::= SEQUENCE { agentSwitchPowerSupplyIndex INTEGER, agentSwitchPowerSupplyMaxPwrOutput INTEGER, agentSwitchPowerSupplyCurPwrOutput INTEGER, agentSwitchPowerSupplyIntakeTemp INTEGER, agentSwitchPowerSupplyExhaustTemp INTEGER, agentSwitchPowerSupplyStatus INTEGER, agentSwitchPowerSupplyInputLineStatus INTEGER, agentSwitchPowerSupplyCondition INTEGER } agentSwitchPowerSupplyIndex OBJECT-TYPE -- cpqRackPowerSupplyIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this power supply in the enclosure." ::= { agentSwitchPowerSupplyEntry 1 } -- { cpqRackPowerSupplyEntry 3 } agentSwitchPowerSupplyMaxPwrOutput OBJECT-TYPE -- cpqRackPowerSupplyMaxPwrOutput OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum power output of the power supply in watts. The value will be -1 if the power supply does not report the value." ::= { agentSwitchPowerSupplyEntry 2 } -- { cpqRackPowerSupplyEntry 9 } agentSwitchPowerSupplyCurPwrOutput OBJECT-TYPE -- cpqRackPowerSupplyCurPwrOutput OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current power output of the power supply in watts. The value will be -1 if the power supply does not report the value." ::= { agentSwitchPowerSupplyEntry 3 } -- { cpqRackPowerSupplyEntry 10 } agentSwitchPowerSupplyIntakeTemp OBJECT-TYPE -- cpqRackPowerSupplyIntakeTemp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current air temperature at the intake of the power supply in degrees celsius. The value will be -1 if the power supply does not report the value." ::= { agentSwitchPowerSupplyEntry 4 } -- { cpqRackPowerSupplyEntry 12 } agentSwitchPowerSupplyExhaustTemp OBJECT-TYPE -- cpqRackPowerSupplyExhaustTemp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current air temperature at the exhaust of the power supply in degrees celsius. The value will be -1 if the power supply does not report the value." ::= { agentSwitchPowerSupplyEntry 5 } -- { cpqRackPowerSupplyEntry 13 } agentSwitchPowerSupplyStatus OBJECT-TYPE -- cpqRackPowerSupplyStatus OBJECT-TYPE SYNTAX INTEGER { noError(1), generalFailure(2), bistFailure(3), fanFailure(4), tempFailure(5), interlockOpen(6), epromFailed(7), vrefFailed(8), dacFailed(9), ramTestFailed(10), voltageChannelFailed(11), orringdiodeFailed(12), brownOut(13), giveupOnStartup(14), nvramInvalid(15), calibrationTableInvalid(16) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the power supply." ::= { agentSwitchPowerSupplyEntry 6 } -- { cpqRackPowerSupplyEntry 14 } agentSwitchPowerSupplyInputLineStatus OBJECT-TYPE -- cpqRackPowerSupplyInputLineStatus OBJECT-TYPE SYNTAX INTEGER { noError(1), lineOverVoltage(2), lineUnderVoltage(3), lineHit(4), brownOut(5), linePowerLoss(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of line input power." ::= { agentSwitchPowerSupplyEntry 7 } -- { cpqRackPowerSupplyEntry 15 } agentSwitchPowerSupplyCondition OBJECT-TYPE -- cpqRackPowerSupplyCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The condition of the power supply. This value will be one of the following: other(1) The status could not be determined or not present. ok(2) The power supply is operating normally. degraded(3) A temperature sensor, fan or other power supply component is outside of normal operating range. failed(4) A power supply component detects a condition that could possibly damage the system." ::= { agentSwitchPowerSupplyEntry 8 } -- { cpqRackPowerSupplyEntry 17 } -- ********************* -- agentSwitchFanTable * -- ********************* -- agentSwitchFan OBJECT IDENTIFIER ::= { agentSwitchCommonMgmt 3 } agentSwitchFanTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentSwitchFanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of fan information." ::= { agentSwitchFan 1 } agentSwitchFanEntry OBJECT-TYPE SYNTAX AgentSwitchFanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A switch fan description." INDEX { cpqRackAssetIndex, cpqRackCommonEnclosureRack, cpqRackCommonEnclosureIndex, cpqRackNetConnectorRack, cpqRackNetConnectorChassis, cpqRackNetConnectorIndex, agentSwitchFanIndex } ::= { agentSwitchFanTable 1 } AgentSwitchFanEntry ::= SEQUENCE { agentSwitchFanIndex INTEGER, agentSwitchFanCondition INTEGER } agentSwitchFanIndex OBJECT-TYPE -- cpqRackCommonEnclosureFanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this fan within this server enclosure in the rack." ::= { agentSwitchFanEntry 1 } -- { cpqRackCommonEnclosureFanEntry 3 } agentSwitchFanCondition OBJECT-TYPE -- cpqRackCommonEnclosureFanCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The condition of the fan. This value will be one of the following: other(1) Fan status detection is not supported. ok(2) The fan is operating properly. degraded(3) A redundant fan is not operating properly. failed(4) A non-redundant fan is not operating properly." ::= { agentSwitchFanEntry 2 } -- { cpqRackCommonEnclosureFanEntry 11 } -- ********************** -- agentSwitchTempTable * -- ********************** -- agentSwitchTempSensor OBJECT IDENTIFIER ::= { agentSwitchCommonMgmt 4 } agentSwitchTempSensorTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentSwitchTempSensorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of temperature sensor information." ::= { agentSwitchTempSensor 1 } agentSwitchTempSensorEntry OBJECT-TYPE SYNTAX AgentSwitchTempSensorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A switch temperature sensor description." INDEX { cpqRackAssetIndex, cpqRackCommonEnclosureRack, cpqRackCommonEnclosureIndex, cpqRackNetConnectorRack, cpqRackNetConnectorChassis, cpqRackNetConnectorIndex, agentSwitchTempSensorIndex } ::= { agentSwitchTempSensorTable 1 } AgentSwitchTempSensorEntry ::= SEQUENCE { agentSwitchTempSensorIndex INTEGER, agentSwitchTempSensorCurrent INTEGER, agentSwitchTempSensorThreshold INTEGER, agentSwitchTempSensorCondition INTEGER, agentSwitchTempSensorTempType INTEGER } agentSwitchTempSensorIndex OBJECT-TYPE -- cpqRackCommonEnclosureTempSensorIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this temperature sensor within this server enclosure in the rack." ::= { agentSwitchTempSensorEntry 1 } -- { cpqRackCommonEnclosureTempEntry 3 } agentSwitchTempSensorCurrent OBJECT-TYPE -- cpqRackCommonEnclosureTempCurrent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the current temperature sensor reading in degrees celsius. If this value cannot be determined by software, then a value of -1 will be returned." ::= { agentSwitchTempSensorEntry 2 } -- { cpqRackCommonEnclosureTempEntry 6 } agentSwitchTempSensorThreshold OBJECT-TYPE -- cpqRackCommonEnclosureTempThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the threshold temperature sensor setting in degrees celsius. This is the temperature in which the sensor will be considered to be in a tripped state this causing some action to occur depending on the type of the sensor. The action of temperature sensor threshold will be indicated by the cpqRackCommonEnclosureTempType item. If the type is blowout(5), then the temperature sensor will cause the fans to speed up. If the type is caution(9), then the temperature sensor is in a degraded state. If the type is critical(15), then the server will be considered as in a failed state. If this value cannot be determined by software, then a value of -1 will be returned." ::= { agentSwitchTempSensorEntry 3 } -- { cpqRackCommonEnclosureTempEntry 7 } agentSwitchTempSensorCondition OBJECT-TYPE -- cpqRackCommonEnclosureTempCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The Temperature sensor condition. This value will be one of the following: other(1) Temperature could not be determined. ok(2) The temperature sensor is within the normal operating range. degraded(3) The temperature sensor is outside of the normal operating range. failed(4) The temperature sensor detects a condition that could possibly damage the system. The system will automatically shutdown if the failed(4) condition results, so it is unlikely that this value will ever be returned by the agent." ::= { agentSwitchTempSensorEntry 4 } -- { cpqRackCommonEnclosureTempEntry 8 } agentSwitchTempSensorTempType OBJECT-TYPE -- cpqRackCommonEnclosureTempType OBJECT-TYPE SYNTAX INTEGER { other(1), blowout(5), caution(9), critical(15) } ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the type of this instance of temperature sensor. This value will be one of the following: other(1) Temperature threshold type could not be determined. blowout(5) If a blowout(5) temperature sensor reaches its threshold, the fan or fans in the area of the temperature sensor will increase in speed in an attempt to reduce the temperature before a caution or critical threshold is reached. caution(9) If a caution(9) temperature sensor reaches its threshold, the cpqRackCommonEnclosureTempCondition will be set to degraded(3) and the system will either continue or shutdown depending on the user preferences. critical(15) If a critical(15) temperature sensor reaches its threshold, the cpqHeTemperatureCondition will be set to failed(4) and the system will shutdown." ::= { agentSwitchTempSensorEntry 5 } -- { cpqRackCommonEnclosureTempEntry 9 } endOfMIB OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "End of MIB" ::= { agentSwitchCommonMgmt 9999 } END