-- SECTION 1: Top Level Definitions CENTILLION-LESBUS-MIB DEFINITIONS ::= BEGIN -- Centillion LANE Extention MIB Release 2.0.7 -- Revision 04/18/00 -- Copyright 1994-2000 Nortel Networks, Inc. -- All rights reserved. -- This Bay Networks SNMP Management Information Base Specification -- (Specification) embodies Bay Networks' confidential and -- proprietary intellectual property. Bay Networks retains all -- title and ownership in the Specification, including any -- revisions. -- This Specification is supplied "AS IS," and Bay Networks makes -- no warranty, either express or implied, as to the use, -- operation, condition, or performance of the Specification. -- Imports IMPORTS OBJECT-TYPE FROM RFC-1212 lecIndex, AtmLaneAddress FROM LAN-EMULATION-CLIENT-MIB LesLocalIndex FROM LAN-EMULATION-LES-MIB TimeIntervalSec FROM S5-TCS-MIB atmLane, EnableIndicator FROM CENTILLION-ROOT-MIB lecsConfIndex FROM LAN-EMULATION-ELAN-MIB TruthValue FROM SNMPv2-TC-v1; -- Groups cnLesBusExtnGroup OBJECT IDENTIFIER ::= { atmLane 1 } cnLecExtnGroup OBJECT IDENTIFIER ::= { atmLane 2 } cnLecsExtnGroup OBJECT IDENTIFIER ::= { atmLane 3 } atmCallRoutingConfig OBJECT IDENTIFIER ::= { atmLane 4 } cnLaneGlobalConf OBJECT IDENTIFIER ::= { atmLane 5 } -- SECTION 2: LES/BUS Extention Group cnLesBusTable OBJECT-TYPE SYNTAX SEQUENCE OF CnLesBusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "smart les/bus enable and unique server id." ::= { cnLesBusExtnGroup 1 } cnLesBusEntry OBJECT-TYPE SYNTAX CnLesBusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " ." INDEX { cnLesBusConfIndex } ::= { cnLesBusTable 1 } CnLesBusEntry ::= SEQUENCE { cnLesBusConfIndex LesLocalIndex, cnLesBusSmartLes INTEGER, cnLesBusServerId INTEGER, cnLesBusBusAddrSpec AtmLaneAddress, cnLesBusBusAddrActual AtmLaneAddress } cnLesBusConfIndex OBJECT-TYPE SYNTAX LesLocalIndex ACCESS read-only STATUS mandatory DESCRIPTION " A value which uniquely identifies a conceptual row in the lesConfTable." ::= {cnLesBusEntry 1} cnLesBusSmartLes OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION " This object is used to turn on/off smart les/bus." ::= { cnLesBusEntry 2} cnLesBusServerId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " This object specifies the unique server id among all les/bus pairs that serve the same elan." ::= {cnLesBusEntry 3} cnLesBusBusAddrSpec OBJECT-TYPE SYNTAX AtmLaneAddress ACCESS read-write STATUS mandatory DESCRIPTION " The bus address." ::= {cnLesBusEntry 4} cnLesBusBusAddrActual OBJECT-TYPE SYNTAX AtmLaneAddress ACCESS read-only STATUS mandatory DESCRIPTION " The bus address." ::= {cnLesBusEntry 5} cnLesBusPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF CnLesBusPeerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The LES/BUS peer table. This table contains the all LES/BUS pairs of the ELANs managed by the agent. The LES/BUS instantiated by the agent is also included in this table. Other LES/BUS pairs that are not running in the same system being managed by the agent are configured by the user. Note that there is no verification protocol supported for the entries configured by the user." ::= { cnLesBusExtnGroup 2 } cnLesBusPeerEntry OBJECT-TYPE SYNTAX CnLesBusPeerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A pair of LES/BUS for the ELAN managed by the agent." INDEX { cnLesBusIndex, cnLesBusPeerIndex } ::= { cnLesBusPeerTable 1 } CnLesBusPeerEntry ::= SEQUENCE { cnLesBusIndex LesLocalIndex, cnLesBusPeerIndex INTEGER, cnLesBusPeerLesAddr AtmLaneAddress, cnLesBusPeerBusAddr AtmLaneAddress, cnLesBusPeerStatus INTEGER } cnLesBusIndex OBJECT-TYPE SYNTAX LesLocalIndex ACCESS read-only STATUS mandatory DESCRIPTION "Index into the ELAN this pair of LES/BUS is servicing." ::= { cnLesBusPeerEntry 1 } cnLesBusPeerIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer which uniquly identifies a pair of LES/BUS within an ELAN." ::= { cnLesBusPeerEntry 2 } cnLesBusPeerLesAddr OBJECT-TYPE SYNTAX AtmLaneAddress ACCESS read-write STATUS mandatory DESCRIPTION "The ATM address of the LES." ::= { cnLesBusPeerEntry 3 } cnLesBusPeerBusAddr OBJECT-TYPE SYNTAX AtmLaneAddress ACCESS read-write STATUS mandatory DESCRIPTION "The ATM address of the BUS." ::= { cnLesBusPeerEntry 4 } cnLesBusPeerStatus OBJECT-TYPE SYNTAX INTEGER { create(1), -- create an entry, write only delete(2), -- delete an entry, write only active(3), -- read only value inactive(4) -- read only value } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or destroy an entry from this table. This object also reflect the current state of the peer LES/BUS. If both peer LES and BUS are connected to this LES/BUS, then active(3) is returned when read, otherwise inactive(4) will be returned." ::= { cnLesBusPeerEntry 5 } -- Port range support for LESBUS cnLesBusPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CnLesBusPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM port a LESBUS uses to establish virtual circuits(VCC). A User can choose to either select the any-port capability, which let the LESBUS choose whichever the ATM port is available. Or the user can specify a list of ATM ports the LESBUS will request the VCCs. When a list of ATM ports are specified, There are four objects used for specifying the ATM port numbers. The object cnLesBusPortAtmPort1 is used first, the object cnLesBusPortAtmPort2 second if the first failed and so on." ::= { cnLesBusExtnGroup 3 } cnLesBusPortEntry OBJECT-TYPE SYNTAX CnLesBusPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represent a LESBUS maintained by this agent. The entries are indexed by the same index (LesBusIndex) from the LesBusConfigTable defined in the ATM Forum LESBUS MIB." INDEX { cnLesBusPortElanIndex, cnLesBusPortIndex } ::= { cnLesBusPortTable 1 } CnLesBusPortEntry ::= SEQUENCE { cnLesBusPortElanIndex INTEGER, cnLesBusPortIndex INTEGER, cnLesBusCardId INTEGER, cnLesBusPortId INTEGER, cnLesBusPortStatus INTEGER } cnLesBusPortElanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An index to the LESBUS pair that will use this table." ::= { cnLesBusPortEntry 1 } cnLesBusPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An index to an entry in the port table" ::= { cnLesBusPortEntry 2 } cnLesBusCardId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Card ID of the ATM card." ::= { cnLesBusPortEntry 3 } cnLesBusPortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Port ID of the ATM port." ::= { cnLesBusPortEntry 4 } cnLesBusPortStatus OBJECT-TYPE SYNTAX INTEGER { create(1), -- create an entry, write only delete(2), -- delete an entry, write only active(3), -- read only value inactive(4) -- read only value } ACCESS read-write STATUS mandatory DESCRIPTION "The object is used to create or destroy an entry from this table. This object also reflect the current state of the port entry. If the client uses this port to join the ELAN, then active(3) is returned when read." ::= { cnLesBusPortEntry 5 } -- SECTION 3: LEC Extention Group cnLecServerTable OBJECT-TYPE SYNTAX SEQUENCE OF CnLecServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The LE Client's user configured server list. The LEC can use any pf the servers defined in this table. The search order matches the order of the entries in the table." ::= { cnLecExtnGroup 1 } cnLecServerEntry OBJECT-TYPE SYNTAX CnLecServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A LE server that the LEC can use." INDEX { lecIndex, cnLecServerIndex } ::= { cnLecServerTable 1 } CnLecServerEntry ::= SEQUENCE { cnLecServerIndex INTEGER, cnLecServerType INTEGER, cnLecServerAddress AtmLaneAddress, cnLecServerStatus INTEGER } cnLecServerIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An index to the lec server table." ::= { cnLecServerEntry 1 } cnLecServerType OBJECT-TYPE SYNTAX INTEGER { lecsAtmForum(1), lecsFromIlmi(2), directLecs(3), directLes(4), lecsFromPvc(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The field specifies how the the LEC can get to the server and the server type (LES or LECS). The LEC can connect to either the LECS via ILMI/PVC/ATM address or the LES via ATm address." ::= { cnLecServerEntry 2 } cnLecServerAddress OBJECT-TYPE SYNTAX AtmLaneAddress ACCESS read-write STATUS mandatory DESCRIPTION "The field specifies the ATM address (20 octets) of the server when an ATM address is needed. If an ATM address is not needed, zero will be returned when read." ::= { cnLecServerEntry 3 } cnLecServerStatus OBJECT-TYPE SYNTAX INTEGER { create(1), -- create an entry, write only delete(2), -- delete an entry, write only active(3) -- read only value } ACCESS read-write STATUS mandatory DESCRIPTION "The object is used to create or destroy an entry from this table. The entry is always in active state once created." ::= { cnLecServerEntry 4 } -- Port range support for LEC cnLecPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CnLecPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM port a LEC uses to establish virtual circuits(VCC). A User can choose to either select the any-port capability, which let the LEC choose whichever the ATM port is available. Or the user can specify a list of ATM ports the LEC will request the VCCs. When a list of ATM ports are specified, There are four objects used for specifying the ATM port numbers. The object cnLecPortAtmPort1 is used first, the object cnlecPortAtmPort2 second if the first failed and so on." ::= { cnLecExtnGroup 2 } cnLecPortEntry OBJECT-TYPE SYNTAX CnLecPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represent a LEC maintained by this agent. The entries are indexed by the same index (lecIndex) from the lecConfigTable defined in the ATM Forum LEC MIB." INDEX { cnLecPortlecIndex, cnLecPortIndex } ::= { cnLecPortTable 1 } CnLecPortEntry ::= SEQUENCE { cnLecPortlecIndex INTEGER, cnLecPortIndex INTEGER, cnLecCardId INTEGER, cnLecPortId INTEGER, cnLecPortStatus INTEGER } cnLecPortlecIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An index to the LEC that will use this table." ::= { cnLecPortEntry 1 } cnLecPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An index to an entry in the port table" ::= { cnLecPortEntry 2 } cnLecCardId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Card ID of the ATM card." ::= { cnLecPortEntry 3 } cnLecPortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Port ID of the ATM port." ::= { cnLecPortEntry 4 } cnLecPortStatus OBJECT-TYPE SYNTAX INTEGER { create(1), -- create an entry, write only delete(2), -- delete an entry, write only active(3), -- read only value inactive(4) -- read only value } ACCESS read-write STATUS mandatory DESCRIPTION "The object is used to create or destroy an entry from this table. This object also reflect the current state of the port entry. If the client uses this port to join the ELAN, then active(3) is returned when read." ::= { cnLecPortEntry 5 } -- SECTION 4: LECS Extention Group -- Port range support for LESBUS cnLecsPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CnLecsPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM port a Lecs uses to establish virtual circuits(VCC). A User can choose to either select the any-port capability, which let the Lecs choose whichever the ATM port is available. Or the user can specify a list of ATM ports the Lecs will request the VCCs. When a list of ATM ports are specified, There are four objects used for specifying the ATM port numbers. The object cnLecsPortAtmPort1 is used first, the object cnLecsPortAtmPort2 second if the first failed and so on." ::= { cnLecsExtnGroup 1 } cnLecsPortEntry OBJECT-TYPE SYNTAX CnLecsPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represent a Lecs maintained by this agent. The entries are indexed by the same index (LecsIndex) from the LecsConfigTable defined in the ATM Forum Lecs MIB." INDEX { cnLecsIndex, cnLecsPortIndex } ::= { cnLecsPortTable 1 } CnLecsPortEntry ::= SEQUENCE { cnLecsIndex INTEGER, cnLecsPortIndex INTEGER, cnLecsCardId INTEGER, cnLecsPortId INTEGER, cnLecsPortStatus INTEGER } cnLecsIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An index to the Lecs pair that will use this table." ::= { cnLecsPortEntry 1 } cnLecsPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An index to an entry in the port table" ::= { cnLecsPortEntry 2 } cnLecsCardId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Card ID of the ATM card." ::= { cnLecsPortEntry 3 } cnLecsPortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Port ID of the ATM port." ::= { cnLecsPortEntry 4 } cnLecsPortStatus OBJECT-TYPE SYNTAX INTEGER { create(1), -- create an entry, write only delete(2), -- delete an entry, write only active(3), -- read only value inactive(4) -- read only value } ACCESS read-write STATUS mandatory DESCRIPTION "The object is used to create or destroy an entry from this table. This object also reflect the current state of the port entry. If the client uses this port to join the ELAN, then active(3) is returned when read." ::= { cnLecsPortEntry 5 } cnLecsExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF CnLecsExtnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "LECS LANE extension table" ::= { cnLecsExtnGroup 2 } cnLecsExtnEntry OBJECT-TYPE SYNTAX CnLecsExtnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An extension to the lecsConfEntry which contains objects associated to a LECS." INDEX { lecsConfIndex } ::= { cnLecsExtnTable 1 } CnLecsExtnEntry ::= SEQUENCE { cnLecsExtnAtmAddressSelect INTEGER } cnLecsExtnAtmAddressSelect OBJECT-TYPE SYNTAX INTEGER { atmForum(1), userDefined(2) } ACCESS read-write STATUS mandatory DESCRIPTION "LECS ATM Address selection. atmForum(1) - ATM Forum well known ATM Address. userDefined(2) - User defined ATM Address." ::= {cnLecsExtnEntry 1} -- SECTION 5: ATM Call Routing Table (IISP) -- This group contains information pertaining to ATM elan -- configuration in the system atmCallRoutingConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmCallRoutingConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ATM call routing config table" ::= { atmCallRoutingConfig 1 } atmCallRoutingConfigEntry OBJECT-TYPE SYNTAX AtmCallRoutingConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Objects atmCallRoutingId, and atmCallRoutingRowStatus are required during row creation. And object elanLesRowStatus is required during row deletion." INDEX { atmCallRoutingId } ::= { atmCallRoutingConfigTable 1 } AtmCallRoutingConfigEntry ::= SEQUENCE { atmCallRoutingId INTEGER, atmCallRoutingAtmAddress AtmLaneAddress, atmCallRoutingType INTEGER, atmCallRoutingCard INTEGER, atmCallRoutingPort INTEGER, atmCallRoutingCost INTEGER, atmCallRoutingEnable INTEGER, atmCallRoutingRowStatus INTEGER, atmCallRoutingScope INTEGER, atmCallRoutingVpi INTEGER, atmCallRoutingFilterEnable EnableIndicator } atmCallRoutingId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Route id " ::= { atmCallRoutingConfigEntry 1 } atmCallRoutingAtmAddress OBJECT-TYPE SYNTAX AtmLaneAddress ACCESS read-write STATUS mandatory DESCRIPTION "Routable ATM address for route type host and network. Filter prefix for a default route entry." ::= { atmCallRoutingConfigEntry 2 } atmCallRoutingType OBJECT-TYPE SYNTAX INTEGER { host(1), network(2), linkGroup(3), default(4) } ACCESS read-write STATUS mandatory DESCRIPTION "A complete ATM address is specified in a routing entry when the route type is host. For the network route type, only partial ATM address, usually the network prefix portion, is specified. Linkgroup is a special route type which can be defined in a way that loops are eliminated. The default type allows a route entry to be created that forwards to all destinations. " ::= { atmCallRoutingConfigEntry 3 } atmCallRoutingCard OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates the ATM card id." ::= { atmCallRoutingConfigEntry 4 } atmCallRoutingPort OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates ATM port id." ::= { atmCallRoutingConfigEntry 5 } atmCallRoutingCost OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The cost of the route. range from 0 to 255 with 0 the least cost. This is the link group id if atmCallRoutingType is linkGroup." ::= { atmCallRoutingConfigEntry 6 } atmCallRoutingEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable bit of the call routing. 1 = enable routing 2 = disable routing " ::= { atmCallRoutingConfigEntry 7 } atmCallRoutingRowStatus OBJECT-TYPE SYNTAX INTEGER { add(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The current status of the entry. Entries may be added by specifying a value of valid, and removed by setting the status to invalid." ::= { atmCallRoutingConfigEntry 8 } atmCallRoutingScope OBJECT-TYPE SYNTAX INTEGER (0..104) ACCESS read-write STATUS mandatory DESCRIPTION "PNNI scope value" ::= { atmCallRoutingConfigEntry 9 } atmCallRoutingVpi OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION " The VPI of the route." ::= { atmCallRoutingConfigEntry 10 } atmCallRoutingFilterEnable OBJECT-TYPE SYNTAX EnableIndicator ACCESS read-write STATUS mandatory DESCRIPTION "Enable bit of the filter for a default route. When the filter is enabled, data will be forwarded to all destinations except for a defined prefix." DEFVAL { disabled } ::= { atmCallRoutingConfigEntry 11 } -- SECTION 6: ATM Golobal Config cnLaneSig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Global parameter to enable or disable signalling in the box." ::= { cnLaneGlobalConf 1} cnLaneEdge OBJECT-TYPE SYNTAX INTEGER { edgeOnly(1), edgeAndSwitch(2), switchOnly(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Global configuration of the box edge: configured as LEC only services edgeAndswitch: configured as full LANE services switchOnly: configured as switch only services." ::= { cnLaneGlobalConf 2 } cnLaneNetPrefix OBJECT-TYPE SYNTAX OCTET STRING(SIZE(13)) ACCESS read-write STATUS mandatory DESCRIPTION "Useful if the box is configured as edgeAndswitch." ::= { cnLaneGlobalConf 3 } cnLaneStatusEnquiryEnable OBJECT-TYPE SYNTAX EnableIndicator ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to enable or disable the Status enquiry. Note that this parametwer is used only if the ATM signalling is enabled." DEFVAL { disabled } ::= { cnLaneGlobalConf 4 } cnLaneStatusEnquiryInterval OBJECT-TYPE SYNTAX TimeIntervalSec (120..9999) ACCESS read-write STATUS mandatory DESCRIPTION "The Status Enquiry requests for each call are sent periodically at this interval (in secs). Note that this parametwer is used only if the ATM signalling and atmSysStatusEnquiryEnable are enabled." DEFVAL { 600 } ::= { cnLaneGlobalConf 5 } -- SECTION 7: LEC Config Extention Group cnLecConfigExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF CnLecConfigExtnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This the extension table of lecConfigTable. " ::= { cnLecExtnGroup 3 } cnLecConfigExtnEntry OBJECT-TYPE SYNTAX CnLecConfigExtnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each table entry contains configuration information for one LAN Emulation Client." INDEX { lecIndex } ::= { cnLecConfigExtnTable 1 } CnLecConfigExtnEntry ::= SEQUENCE { cnLecTargetlessArp EnableIndicator, cnLecQoSAdminStatus EnableIndicator, cnLecQoSOperStatus TruthValue } cnLecTargetlessArp OBJECT-TYPE SYNTAX EnableIndicator ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to enable or disable the targetless LE_ARP." DEFVAL { enabled } ::= { cnLecConfigExtnEntry 1 } cnLecQoSAdminStatus OBJECT-TYPE SYNTAX EnableIndicator ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to enable or disable QoS features for the LEC. QoS can be enabled for V2 capable LECs in Ethernet ELANs." DEFVAL { disabled } ::= { cnLecConfigExtnEntry 2 } cnLecQoSOperStatus OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "This object is true when the LEC is able to conduct QoS feature operation. It is false when QoS features are not permitted, such as when cnLecQoSAdminStatus is not enabled or the LEC does not join a V2 capable ELAN." ::= { cnLecConfigExtnEntry 3 } END