#-MIBFILE: cisco-qos-pib.mib

CISCO-QOS-PIB-MIB DEFINITIONS ::= BEGIN


DisplayString ::=
	OCTET STRING (SIZE(0..255))

PhysAddress ::=
	OCTET STRING

MacAddress ::=
	OCTET STRING (SIZE(6))

TruthValue ::=
	INTEGER {
	true(1),
	false(2)
	}

TestAndIncr ::=
	INTEGER (0..2147483647)

AutonomousType ::=
	OBJECT IDENTIFIER

InstancePointer ::=
	OBJECT IDENTIFIER

VariablePointer ::=
	OBJECT IDENTIFIER

RowPointer ::=
	OBJECT IDENTIFIER

RowStatus ::=
	INTEGER {
	active(1),
	notInService(2),
	notReady(3),
	createAndGo(4),
	createAndWait(5),
	destroy(6)
	}

TimeStamp ::=
	TimeTicks

TimeInterval ::=
	INTEGER (0..2147483647)

DateAndTime ::=
	OCTET STRING (SIZE(8|11))

StorageType ::=
	INTEGER {
	other(1),
	volatile(2),
	nonVolatile(3),
	permanent(4),
	readOnly(5)
	}

TDomain ::=
	OBJECT IDENTIFIER

TAddress ::=
	OCTET STRING (SIZE(1..255))

cisco OBJECT IDENTIFIER ::= { enterprises 9 }
ciscoPolicyAuto OBJECT IDENTIFIER ::= { cisco 18 }
ciscoPibToMib OBJECT IDENTIFIER ::= { ciscoPolicyAuto 2 }
Dscp ::=
	INTEGER (0..63)

QosLayer2Cos ::=
	INTEGER (0..7)

QueueRange ::=
	INTEGER {
	oneQ(1),
	twoQ(2),
	threeQ(3),
	fourQ(4),
	eightQ(8),
	sixteenQ(16),
	thirtyTwoQ(32),
	sixtyFourQ(64)
	}

ThresholdSetRange ::=
	INTEGER {
	zeroT(0),
	oneT(1),
	twoT(2),
	fourT(4),
	eightT(8)
	}

Percent ::=
	INTEGER (0..100)

QosInterfaceQueueType ::=
	INTEGER {
	oneQ1t(1),
	oneQ2t(2),
	oneQ4t(3),
	oneQ8t(4),
	twoQ1t(5),
	twoQ2t(6),
	twoQ4t(7),
	twoQ8t(8),
	threeQ1t(9),
	threeQ2t(10),
	threeQ4t(11),
	threeQ8t(12),
	fourQ1t(13),
	fourQ2t(14),
	fourQ4t(15),
	fourQ8t(16),
	eightQ1t(17),
	eightQ2t(18),
	eightQ4t(19),
	eightQ8t(20),
	sixteenQ1t(21),
	sixteenQ2t(22),
	sixteenQ4t(23),
	sixtyfourQ1t(24),
	sixtyfourQ2t(25),
	sixtyfourQ4t(26),
	oneP1Q0t(27),
	oneP1Q4t(28),
	oneP1Q8t(29),
	oneP2Q1t(30),
	oneP2Q2t(31),
	oneP3Q1t(32),
	oneP7Q8t(33),
	oneP3Q8t(34)
	}

QosInterfaceTypeCapabilities ::=
	OCTET STRING {
	unspecified(0),
	inputL2Classification(1),
	inputIpClassification(2),
	outputL2Classification(3),
	outputIpClassification(4),
	inputPortClassification(19),
	outputPortClassification(20),
	inputUflowPolicing(5),
	inputAggregatePolicing(6),
	outputUflowPolicing(7),
	outputAggregatePolicing(8),
	policeByMarkingDown(9),
	policeByDropping(10),
	inputUflowShaping(21),
	inputAggregateShaping(22),
	outputUflowShaping(23),
	outputAggregateShaping(24),
	fifo(11),
	wrr(12),
	wfq(13),
	cq(14),
	pq(15),
	cbwfq(16),
	pqWrr(25),
	pqCbwfq(26),
	tailDrop(17),
	wred(18)
	}

RoleCombination ::=
	OCTET STRING (SIZE(0..255))

PolicyInstanceId ::=
	OCTET STRING

Unsigned64 ::=
	OCTET STRING

ciscoQosPIBMIB OBJECT IDENTIFIER ::= { ciscoPibToMib 1 }

qosPIBConformance OBJECT IDENTIFIER ::= { ciscoQosPIBMIB 1 }

qosDeviceConfig OBJECT IDENTIFIER ::= { ciscoQosPIBMIB 2 }

qosDevicePibIncarnationTable OBJECT-TYPE
	SYNTAX SEQUENCE OF QosDevicePibIncarnationEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This class contains a single policy instance that identifies
the current incarnation of the PIB and the PDP that installed
this incarnation.  The instance of this class is reported to
the PDP at client connect time so that the PDP can (attempt
to) ascertain the current state of the PIB."
	::= { qosDeviceConfig 1 }


qosDevicePibIncarnationEntry OBJECT-TYPE
	SYNTAX QosDevicePibIncarnationEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The single policy instance of this class identifies the
current incarnation of the PIB and the PDP that installed
this incarnation."
	INDEX { qosDeviceIncarnationId  }

	::= { qosDevicePibIncarnationTable 1 }

qosDevicePibIncarnationEntry ::=
	SEQUENCE {
		qosDeviceIncarnationId PolicyInstanceId,
		qosDevicePdpName DisplayString,
		qosDevicePibIncarnation OCTET STRING,
		qosDevicePibTtl Unsigned32
		}

qosDeviceIncarnationId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An integer index to identify the instance of the policy class."
	::= { qosDevicePibIncarnationEntry 1 }


qosDevicePdpName OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The name of the PDP that installed the current incarnation of
the PIB into the device.  By default it is the zero length
string."
	::= { qosDevicePibIncarnationEntry 2 }


qosDevicePibIncarnation OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(128))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An octet string to identify the current incarnation.  It has
meaning to the PDP that installed the PIB and perhaps its
standby PDPs. By default the empty string."
	::= { qosDevicePibIncarnationEntry 3 }


qosDevicePibTtl OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of seconds after a client close or TCP timeout for
which the PEP continues to enforce the policy in the PIB.
After this interval, the PIB is consired expired and the
device no longer enforces the policy installed in the PIB."
	::= { qosDevicePibIncarnationEntry 4 }


qosDeviceAttributeTable OBJECT-TYPE
	SYNTAX SEQUENCE OF QosDeviceAttributeEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The single instance of this class indicates specific
attributes of the device.  These include configuration values
such as the configured PDP addresses, the maximum message
size, and specific device capabilities.  The latter include
input port-based and output port-based classification and/or
policing, support for flow based policing, aggregate based
policing, traffic shaping capabilities, etc."
	::= { qosDeviceConfig 2 }


qosDeviceAttributeEntry OBJECT-TYPE
	SYNTAX QosDeviceAttributeEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The single instance of this class indicates specific
attributes of the device."
	INDEX { qosDeviceAttributeId  }

	::= { qosDeviceAttributeTable 1 }

qosDeviceAttributeEntry ::=
	SEQUENCE {
		qosDeviceAttributeId PolicyInstanceId,
		qosDevicePepDomain DisplayString,
		qosDevicePrimaryPdp IpAddress,
		qosDeviceSecondaryPdp IpAddress,
		qosDeviceMaxMessageSize Unsigned32,
		qosDeviceCapabilities BITS
		}

qosDeviceAttributeId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An integer index to identify the instance of the policy class."
	::= { qosDeviceAttributeEntry 1 }


qosDevicePepDomain OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The QoS domain that this device belongs to.  This is
configured locally on the device (perhaps by some management
protocol such as SNMP).  By default, it is the zero-length
string."
	::= { qosDeviceAttributeEntry 2 }


qosDevicePrimaryPdp OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The address of the PDP configured to be the primary PDP for
the device."
	::= { qosDeviceAttributeEntry 3 }


qosDeviceSecondaryPdp OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The address of the PDP configured to be the secondary PDP for
the device.  An address of zero indicates no secondary is
configured."
	::= { qosDeviceAttributeEntry 4 }


qosDeviceMaxMessageSize OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum size message that this PEP is capable of
receiving in bytes.  A value of zero means that the maximum
message size is unspecified (but does not mean it is
unlimited).  A message greater than this maximum results in a
MessageTooBig error on a 'no commit' REP."
	::= { qosDeviceAttributeEntry 5 }


qosDeviceCapabilities OBJECT-TYPE
	SYNTAX OCTET STRING {
	unspecified(0),
	layer2Cos(1),
	ipPrecedence(2),
	dscp(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An enumeration of device capabilities.  Used by the PDP to
select policies and configuration to push to the PEP."
	::= { qosDeviceAttributeEntry 6 }


qosInterfaceTypeTable OBJECT-TYPE
	SYNTAX SEQUENCE OF QosInterfaceTypeEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This class describes the interface types of the interfaces
that exist on the device.  It includes the queue type, role
combination and capabilities of interfaces.  The PEP does not
report which specific interfaces have which characteristics."
	::= { qosDeviceConfig 3 }


qosInterfaceTypeEntry OBJECT-TYPE
	SYNTAX QosInterfaceTypeEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An instance of this class describes a role combination for
an interface type of an interface that exists on the device."
	INDEX { qosInterfaceTypeId  }

	::= { qosInterfaceTypeTable 1 }

qosInterfaceTypeEntry ::=
	SEQUENCE {
		qosInterfaceTypeId PolicyInstanceId,
		qosInterfaceQueueType QosInterfaceQueueType,
		qosInterfaceTypeRoles RoleCombination,
		qosInterfaceTypeCapabilities QosInterfaceTypeCapabilities
		}

qosInterfaceTypeId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An integer index to identify the instance of the policy class."
	::= { qosInterfaceTypeEntry 1 }


qosInterfaceQueueType OBJECT-TYPE
	SYNTAX INTEGER {
	oneQ1t(1),
	oneQ2t(2),
	oneQ4t(3),
	oneQ8t(4),
	twoQ1t(5),
	twoQ2t(6),
	twoQ4t(7),
	twoQ8t(8),
	threeQ1t(9),
	threeQ2t(10),
	threeQ4t(11),
	threeQ8t(12),
	fourQ1t(13),
	fourQ2t(14),
	fourQ4t(15),
	fourQ8t(16),
	eightQ1t(17),
	eightQ2t(18),
	eightQ4t(19),
	eightQ8t(20),
	sixteenQ1t(21),
	sixteenQ2t(22),
	sixteenQ4t(23),
	sixtyfourQ1t(24),
	sixtyfourQ2t(25),
	sixtyfourQ4t(26),
	oneP1Q0t(27),
	oneP1Q4t(28),
	oneP1Q8t(29),
	oneP2Q1t(30),
	oneP2Q2t(31),
	oneP3Q1t(32),
	oneP7Q8t(33),
	oneP3Q8t(34)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The interface type in terms of number of queues and
thresholds."
	::= { qosInterfaceTypeEntry 2 }


qosInterfaceTypeRoles OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A combination of roles on at least one interface of type
qosInterfaceType."
	::= { qosInterfaceTypeEntry 3 }


qosInterfaceTypeCapabilities OBJECT-TYPE
	SYNTAX OCTET STRING {
	unspecified(0),
	inputL2Classification(1),
	inputIpClassification(2),
	outputL2Classification(3),
	outputIpClassification(4),
	inputPortClassification(19),
	outputPortClassification(20),
	inputUflowPolicing(5),
	inputAggregatePolicing(6),
	outputUflowPolicing(7),
	outputAggregatePolicing(8),
	policeByMarkingDown(9),
	policeByDropping(10),
	inputUflowShaping(21),
	inputAggregateShaping(22),
	outputUflowShaping(23),
	outputAggregateShaping(24),
	fifo(11),
	wrr(12),
	wfq(13),
	cq(14),
	pq(15),
	cbwfq(16),
	pqWrr(25),
	pqCbwfq(26),
	tailDrop(17),
	wred(18)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An enumeration of interface capabilities.  Used by the PDP to
select policies and configuration to push to the PEP."
	::= { qosInterfaceTypeEntry 4 }


qosDomainConfig OBJECT IDENTIFIER ::= { ciscoQosPIBMIB 3 }

qosDiffServMappingTable OBJECT-TYPE
	SYNTAX SEQUENCE OF QosDiffServMappingEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Maps each DSCP to a marked-down DSCP.  Also maps each DSCP to
an IP precedence and QosLayer2Cos.  When configured for the
first time, all 64 entries of the table must be
specified. Thereafter, instances may be modified (with a
delete and install in a single decision) but not deleted
unless all instances are deleted."
	::= { qosDomainConfig 1 }


qosDiffServMappingEntry OBJECT-TYPE
	SYNTAX QosDiffServMappingEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An instance of this class represents mappings from a DSCP."
	INDEX { qosDscp  }

	::= { qosDiffServMappingTable 1 }

qosDiffServMappingEntry ::=
	SEQUENCE {
		qosDscp Dscp,
		qosMarkedDscp Dscp,
		qosL2Cos QosLayer2Cos
		}

qosDscp OBJECT-TYPE
	SYNTAX INTEGER (0..63)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A DSCP for which this entry contains mappings."
	::= { qosDiffServMappingEntry 1 }


qosMarkedDscp OBJECT-TYPE
	SYNTAX INTEGER (0..63)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The DSCP to use instead of the qosDscp when the packet is out
of profile and hence marked as such."
	::= { qosDiffServMappingEntry 2 }


qosL2Cos OBJECT-TYPE
	SYNTAX INTEGER (0..7)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The L2 CoS value to use when mapping this DSCP to layer 2
CoS."
	::= { qosDiffServMappingEntry 3 }


qosCosToDscpTable OBJECT-TYPE
	SYNTAX SEQUENCE OF QosCosToDscpEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Maps each of eight CoS values to a DSCP.  When configured for
the first time, all 8 entries of the table must be
specified. Thereafter, instances may be modified (with a
delete and install in a single decision) but not deleted
unless all instances are deleted."
	::= { qosDomainConfig 2 }


qosCosToDscpEntry OBJECT-TYPE
	SYNTAX QosCosToDscpEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An instance of this class maps a CoS value to a DSCP."
	INDEX { qosCosToDscpCos  }

	::= { qosCosToDscpTable 1 }

qosCosToDscpEntry ::=
	SEQUENCE {
		qosCosToDscpCos QosLayer2Cos,
		qosCosToDscpDscp Dscp
		}

qosCosToDscpCos OBJECT-TYPE
	SYNTAX INTEGER (0..7)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The L2 CoS value that is being mapped."
	::= { qosCosToDscpEntry 1 }


qosCosToDscpDscp OBJECT-TYPE
	SYNTAX INTEGER (0..63)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The DSCP value to use when mapping the L2 CoS to a DSCP."
	::= { qosCosToDscpEntry 2 }


qosUnmatchedPolicy OBJECT IDENTIFIER ::= { ciscoQosPIBMIB 4 }

qosUnmatchedPolicyTable OBJECT-TYPE
	SYNTAX SEQUENCE OF QosUnmatchedPolicyEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A policy class that specifies what QoS to apply to a packet
that does not match any other policy configured for this role
combination for a particular direction of traffic."
	::= { qosUnmatchedPolicy 1 }


qosUnmatchedPolicyEntry OBJECT-TYPE
	SYNTAX QosUnmatchedPolicyEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An instance of this class specifies the unmatched policy
for a particular role combination for incoming or outgoing
traffic."
	INDEX { qosUnmatchedPolicyId  }

	::= { qosUnmatchedPolicyTable 1 }

qosUnmatchedPolicyEntry ::=
	SEQUENCE {
		qosUnmatchedPolicyId PolicyInstanceId,
		qosUnmatchedPolicyRole RoleCombination,
		qosUnmatchedPolicyDirection INTEGER,
		qosUnmatchedPolicyDscp Dscp,
		qosUnmatchedPolicyDscpTrusted TruthValue,
		qosUnmatchPolMicroFlowPolicerId PolicyInstanceId,
		qosUnmatchedPolicyAggregateId PolicyInstanceId
		}

qosUnmatchedPolicyId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An integer index to identify the instance of the policy class."
	::= { qosUnmatchedPolicyEntry 1 }


qosUnmatchedPolicyRole OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Role combination for which this instance applies."
	::= { qosUnmatchedPolicyEntry 2 }


qosUnmatchedPolicyDirection OBJECT-TYPE
	SYNTAX INTEGER {
	in(0),
	out(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The direction of packet flow at the interface in question to
which this instance applies."
	::= { qosUnmatchedPolicyEntry 3 }


qosUnmatchedPolicyDscp OBJECT-TYPE
	SYNTAX INTEGER (0..63)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The DSCP to classify the unmatched packet with.  This must be
specified even if qosUnmatchedPolicyDscpTrusted is true."
	::= { qosUnmatchedPolicyEntry 4 }


qosUnmatchedPolicyDscpTrusted OBJECT-TYPE
	SYNTAX TruthValue
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "If this attribute is true, then the Dscp associated with the
packet is trusted, i.e., it is assumed to have already been
set.  In this case, the Dscp is not rewritten with
qosUnmatchedPolicyDscp (qosUnmatchedPolicyDscp is ignored)
unless this is a non-IP packet and arrives untagged.  The
packet is still policed as part of its micro flow and its
aggregate flow.

When a trusted action is applied to an input interface, the
Dscp (for an IP packet) or CoS (for a non-IP packet)
associated with the packet is the one contained in the packet.
When a trusted action is applied to an output interface, the
Dscp associated with the packet is the one that is the result
of the input classification and policing."
	::= { qosUnmatchedPolicyEntry 5 }


qosUnmatchPolMicroFlowPolicerId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index identifying the instance of policer to apply to
unmatched packets.  It must correspond to the integer index of
an instance of class qosPolicerTable or be zero.  If zero, the
microflow is not policed."
	::= { qosUnmatchedPolicyEntry 6 }


qosUnmatchedPolicyAggregateId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index identifying the aggregate that the packet belongs
to.  It must correspond to the integer index of an instance of
class qosAggregateTable or be zero.  If zero, the microflow
does not belong to any aggregate and is not policed as part of
any aggregate."
	::= { qosUnmatchedPolicyEntry 7 }


qosPolicer OBJECT IDENTIFIER ::= { ciscoQosPIBMIB 5 }

qosPolicerTable OBJECT-TYPE
	SYNTAX SEQUENCE OF QosPolicerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A class specifying policing parameters for both microflows
and aggregate flows.  This table is designed for policing
according to a token bucket scheme where an average rate and
burst size is specified."
	::= { qosPolicer 1 }


qosPolicerEntry OBJECT-TYPE
	SYNTAX QosPolicerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An instance of this class specifies a set of policing
parameters."
	INDEX { qosPolicerId  }

	::= { qosPolicerTable 1 }

qosPolicerEntry ::=
	SEQUENCE {
		qosPolicerId PolicyInstanceId,
		qosPolicerRate Unsigned64,
		qosPolicerNormalBurst Unsigned32,
		qosPolicerExcessBurst Unsigned32,
		qosPolicerAction INTEGER
		}

qosPolicerId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An integer index to identify the instance of the policy class."
	::= { qosPolicerEntry 1 }


qosPolicerRate OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The token rate.  It is specified in units of bit/s. A rate of
zero means that all packets will be out of profile.  If the
qosPolicerAction is set to drop then this effectively
denies any service to packets policed by this policer."
	::= { qosPolicerEntry 2 }


qosPolicerNormalBurst OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The normal size of a burst in terms of bits."
	::= { qosPolicerEntry 3 }


qosPolicerExcessBurst OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The excess size of a burst in terms of bits."
	::= { qosPolicerEntry 4 }


qosPolicerAction OBJECT-TYPE
	SYNTAX INTEGER {
	drop(0),
	mark(1),
	shape(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An indication of how to handle out of profile packets.  When
the shape action is chosen then traffic is shaped to the rate
specified by qosPolicerRate."
	::= { qosPolicerEntry 5 }


qosAggregateTable OBJECT-TYPE
	SYNTAX SEQUENCE OF QosAggregateEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Instances of this class identify aggregate flows and the
policer to apply to each."
	::= { qosPolicer 2 }


qosAggregateEntry OBJECT-TYPE
	SYNTAX QosAggregateEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An instance of this class specifies the policer to apply to
an aggregate flow."
	INDEX { qosAggregateId  }

	::= { qosAggregateTable 1 }

qosAggregateEntry ::=
	SEQUENCE {
		qosAggregateId PolicyInstanceId,
		qosAggregatePolicerId PolicyInstanceId
		}

qosAggregateId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An integer index to identify the instance of the policy class."
	::= { qosAggregateEntry 1 }


qosAggregatePolicerId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index identifying the instance of policer to apply to the
aggregate.  It must correspond to the integer index of an
instance of class qosPolicerTable."
	::= { qosAggregateEntry 2 }


qosMacQos OBJECT IDENTIFIER ::= { ciscoQosPIBMIB 6 }

qosMacClassificationTable OBJECT-TYPE
	SYNTAX SEQUENCE OF QosMacClassificationEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A class of MAC/Vlan tuples and their associated CoS values."
	::= { qosMacQos 1 }


qosMacClassificationEntry OBJECT-TYPE
	SYNTAX QosMacClassificationEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An instance of this class specifies the mapping of a VLAN
and a MAC address to a CoS value."
	INDEX { qosMacClassificationId  }

	::= { qosMacClassificationTable 1 }

qosMacClassificationEntry ::=
	SEQUENCE {
		qosMacClassificationId PolicyInstanceId,
		qosDstMacVlan INTEGER,
		qosDstMacAddress MacAddress,
		qosDstMacCos QosLayer2Cos
		}

qosMacClassificationId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An integer index to identify the instance of the policy class."
	::= { qosMacClassificationEntry 1 }


qosDstMacVlan OBJECT-TYPE
	SYNTAX INTEGER (1..4095)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The VLAN of the destination MAC address of the L2 frame."
	::= { qosMacClassificationEntry 2 }


qosDstMacAddress OBJECT-TYPE
	SYNTAX MacAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The destination MAC address of the L2 frame."
	::= { qosMacClassificationEntry 3 }


qosDstMacCos OBJECT-TYPE
	SYNTAX INTEGER (0..7)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The CoS to assign the packet with the associated MAC/VLAN
tuple.  Note that this CoS is overridden by the policies to
classify the frame at layer 3 if there are any."
	::= { qosMacClassificationEntry 4 }


qosIpQos OBJECT IDENTIFIER ::= { ciscoQosPIBMIB 7 }

qosIpAceTable OBJECT-TYPE
	SYNTAX SEQUENCE OF QosIpAceEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "ACE definitions."
	::= { qosIpQos 1 }


qosIpAceEntry OBJECT-TYPE
	SYNTAX QosIpAceEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An instance of this class specifies an ACE."
	INDEX { qosIpAceId  }

	::= { qosIpAceTable 1 }

qosIpAceEntry ::=
	SEQUENCE {
		qosIpAceId PolicyInstanceId,
		qosIpAceDstAddr IpAddress,
		qosIpAceDstAddrMask IpAddress,
		qosIpAceSrcAddr IpAddress,
		qosIpAceSrcAddrMask IpAddress,
		qosIpAceDscpMin Dscp,
		qosIpAceDscpMax Dscp,
		qosIpAceProtocol INTEGER,
		qosIpAceDstL4PortMin INTEGER,
		qosIpAceDstL4PortMax INTEGER,
		qosIpAceSrcL4PortMin INTEGER,
		qosIpAceSrcL4PortMax INTEGER,
		qosIpAcePermit TruthValue
		}

qosIpAceId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An integer index to identify the instance of the policy class."
	::= { qosIpAceEntry 1 }


qosIpAceDstAddr OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP address to match against the packet's destination IP
address."
	::= { qosIpAceEntry 2 }


qosIpAceDstAddrMask OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A mask for the matching of the destination IP address."
	::= { qosIpAceEntry 3 }


qosIpAceSrcAddr OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP address to match against the packet's source IP
address."
	::= { qosIpAceEntry 4 }


qosIpAceSrcAddrMask OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A mask for the matching of the source IP address."
	::= { qosIpAceEntry 5 }


qosIpAceDscpMin OBJECT-TYPE
	SYNTAX INTEGER (0..63)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The minimum value that the DSCP in the packet can have and
match this ACE."
	::= { qosIpAceEntry 6 }


qosIpAceDscpMax OBJECT-TYPE
	SYNTAX INTEGER (0..63)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum value that the DSCP in the packet can have and
match this ACE."
	::= { qosIpAceEntry 7 }


qosIpAceProtocol OBJECT-TYPE
	SYNTAX INTEGER (0..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP protocol to match against the packet's protocol.
A value of zero means match all."
	::= { qosIpAceEntry 8 }


qosIpAceDstL4PortMin OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The minimum value that the packet's layer 4 dest port number
can have and match this ACE."
	::= { qosIpAceEntry 9 }


qosIpAceDstL4PortMax OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum value that the packet's layer 4 dest port number
can have and match this ACE."
	::= { qosIpAceEntry 10 }


qosIpAceSrcL4PortMin OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The minimum value that the packet's layer 4 source port
number can have and match this ACE."
	::= { qosIpAceEntry 11 }


qosIpAceSrcL4PortMax OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum value that the packet's layer 4 source port
number can have and match this ACE."
	::= { qosIpAceEntry 12 }


qosIpAcePermit OBJECT-TYPE
	SYNTAX TruthValue
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "If the packet matches this ACE and the value of this attribute
is true, then the matching process terminates and the QoS
associated with this ACE (indirectly through the ACL) is
applied to the packet.  If the value of this attribute is false,
then no more ACEs in this ACL are compared to this packet and
matching continues with the first ACE of the next ACL."
	::= { qosIpAceEntry 13 }


qosIpAclDefinitionTable OBJECT-TYPE
	SYNTAX SEQUENCE OF QosIpAclDefinitionEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A class that defines a set of ACLs each being an ordered list
of ACEs."
	::= { qosIpQos 2 }


qosIpAclDefinitionEntry OBJECT-TYPE
	SYNTAX QosIpAclDefinitionEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An instance of this class specifies an ACE in an ACL and its
order with respect to other ACEs in the same ACL."
	INDEX { qosIpAclDefinitionId  }

	::= { qosIpAclDefinitionTable 1 }

qosIpAclDefinitionEntry ::=
	SEQUENCE {
		qosIpAclDefinitionId PolicyInstanceId,
		qosIpAclId PolicyInstanceId,
		qosIpAceOrder Unsigned32,
		qosIpAclDefAceId PolicyInstanceId
		}

qosIpAclDefinitionId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An integer index to identify the instance of the policy class."
	::= { qosIpAclDefinitionEntry 1 }


qosIpAclId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index for this ACL.  There will be one instance of
policy class qosIpAclDefinition with this integer index for
each ACE in the ACL per role combination."
	::= { qosIpAclDefinitionEntry 2 }


qosIpAceOrder OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An integer that determines the position of this ACE in the ACL.
An ACE with a given order is positioned in the access contol
list before one with a higher order."
	::= { qosIpAclDefinitionEntry 3 }


qosIpAclDefAceId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This attribute specifies the ACE in the qosIpAceTable that is
in the ACL specified by qosIpAclId at the position specified
by qosIpAceOrder."
	::= { qosIpAclDefinitionEntry 4 }


qosIpAclActionTable OBJECT-TYPE
	SYNTAX SEQUENCE OF QosIpAclActionEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A class that applies a set of ACLs to interfaces specifying,
for each interface the order of the ACL with respect to other
ACLs applied to the same interface and, for each ACL the
action to take for a packet that matches a permit ACE in that
ACL.  Interfaces are specified abstractly in terms of
interface role combinations."
	::= { qosIpQos 3 }


qosIpAclActionEntry OBJECT-TYPE
	SYNTAX QosIpAclActionEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An instance of this class applies an ACL to traffic in a
particular direction on an interface with a particular role
combination, and specifies the action for packets which match
the ACL."
	INDEX { qosIpAclActionId  }

	::= { qosIpAclActionTable 1 }

qosIpAclActionEntry ::=
	SEQUENCE {
		qosIpAclActionId PolicyInstanceId,
		qosIpAclActAclId PolicyInstanceId,
		qosIpAclInterfaceRoles RoleCombination,
		qosIpAclInterfaceDirection INTEGER,
		qosIpAclOrder Unsigned32,
		qosIpAclDscp Dscp,
		qosIpAclDscpTrusted TruthValue,
		qosIpAclMicroFlowPolicerId PolicyInstanceId,
		qosIpAclAggregateId PolicyInstanceId
		}

qosIpAclActionId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An integer index to identify the instance of the policy class."
	::= { qosIpAclActionEntry 1 }


qosIpAclActAclId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The ACL associated with this action."
	::= { qosIpAclActionEntry 2 }


qosIpAclInterfaceRoles OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The interfaces to which this ACL applies specified in terms
of a set of roles."
	::= { qosIpAclActionEntry 3 }


qosIpAclInterfaceDirection OBJECT-TYPE
	SYNTAX INTEGER {
	in(0),
	out(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The direction of packet flow at the interface in question to
which this ACL applies."
	::= { qosIpAclActionEntry 4 }


qosIpAclOrder OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An integer that determines the order of this ACL in the list
of ACLs applied to interfaces of the specified role
combination. An ACL with a given order is positioned in the
list before one with a higher order."
	::= { qosIpAclActionEntry 5 }


qosIpAclDscp OBJECT-TYPE
	SYNTAX INTEGER (0..63)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The DSCP to classify the packet with in the event that the
packet matches an ACE in this ACL and the ACE is a permit."
	::= { qosIpAclActionEntry 6 }


qosIpAclDscpTrusted OBJECT-TYPE
	SYNTAX TruthValue
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "If this attribute is true, then the Dscp associated with
the packet is trusted, i.e., it is assumed to have already
been set.  In this case, the Dscp is not rewritten with
qosIpAclDscp (qosIpAclDscp is ignored).  The packet is still
policed as part of its micro flow and its aggregate flow.

When a trusted action is applied to an input interface, the
Dscp associated with the packet is the one contained in the
packet.  When a trusted action is applied to an output
interface, the Dscp associated with the packet is the one that
is the result of the input classification and policing."
	::= { qosIpAclActionEntry 7 }


qosIpAclMicroFlowPolicerId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index identifying the instance of policer to apply to the
microflow.  It must correspond to the integer index of an
instance of class qosPolicerTableor be zero.  If zero, the
microflow is not policed."
	::= { qosIpAclActionEntry 8 }


qosIpAclAggregateId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index identifying the aggregate that the packet belongs
to.  It must correspond to the integer index of an instance of
class qosAggregateTable or be zero.  If zero, the microflow
does not belong to any aggregate and is not policed as part of
any aggregate."
	::= { qosIpAclActionEntry 9 }


qosIfParameters OBJECT IDENTIFIER ::= { ciscoQosPIBMIB 8 }

qosIfSchedulingPreferencesTable OBJECT-TYPE
	SYNTAX SEQUENCE OF QosIfSchedulingPreferenceEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This class specifies the scheduling preference an interface
chooses if it supports multiple scheduling types.  Higher
values are preferred over lower values."
	::= { qosIfParameters 1 }


qosIfSchedulingPreferenceEntry OBJECT-TYPE
	SYNTAX QosIfSchedulingPreferenceEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An instance of this class specifies a scheduling preference
for a queue-type on an interface with a particular role
combination."
	INDEX { qosIfSchedulingPreferenceId  }

	::= { qosIfSchedulingPreferencesTable 1 }

qosIfSchedulingPreferenceEntry ::=
	SEQUENCE {
		qosIfSchedulingPreferenceId PolicyInstanceId,
		qosIfSchedulingRoles RoleCombination,
		qosIfSchedulingPreference INTEGER,
		qosIfSchedulingDiscipline INTEGER,
		qosIfSchedulingQueueType QosInterfaceQueueType
		}

qosIfSchedulingPreferenceId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An integer index to identify the instance of the policy class."
	::= { qosIfSchedulingPreferenceEntry 1 }


qosIfSchedulingRoles OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The combination of roles the interface must have for this
policy instance to apply to that interface."
	::= { qosIfSchedulingPreferenceEntry 2 }


qosIfSchedulingPreference OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The preference to use this scheduling discipline and queue
type.  A higher value means a higher preference.  If two
disciplines have the same preference the choice is a local
decision."
	::= { qosIfSchedulingPreferenceEntry 3 }


qosIfSchedulingDiscipline OBJECT-TYPE
	SYNTAX INTEGER {
	weightedFairQueueing(1),
	weightedRoundRobin(2),
	customQueueing(3),
	priorityQueueing(4),
	classBasedWFQ(5),
	fifo(6),
	pqWrr(7),
	pqCbwfq(8)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An enumerate type for all the known scheduling disciplines."
	::= { qosIfSchedulingPreferenceEntry 4 }


qosIfSchedulingQueueType OBJECT-TYPE
	SYNTAX INTEGER {
	oneQ1t(1),
	oneQ2t(2),
	oneQ4t(3),
	oneQ8t(4),
	twoQ1t(5),
	twoQ2t(6),
	twoQ4t(7),
	twoQ8t(8),
	threeQ1t(9),
	threeQ2t(10),
	threeQ4t(11),
	threeQ8t(12),
	fourQ1t(13),
	fourQ2t(14),
	fourQ4t(15),
	fourQ8t(16),
	eightQ1t(17),
	eightQ2t(18),
	eightQ4t(19),
	eightQ8t(20),
	sixteenQ1t(21),
	sixteenQ2t(22),
	sixteenQ4t(23),
	sixtyfourQ1t(24),
	sixtyfourQ2t(25),
	sixtyfourQ4t(26),
	oneP1Q0t(27),
	oneP1Q4t(28),
	oneP1Q8t(29),
	oneP2Q1t(30),
	oneP2Q2t(31),
	oneP3Q1t(32),
	oneP7Q8t(33),
	oneP3Q8t(34)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The queue type of this preference."
	::= { qosIfSchedulingPreferenceEntry 5 }


qosIfDropPreferenceTable OBJECT-TYPE
	SYNTAX SEQUENCE OF QosIfDropPreferenceEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This class specifies the preference of the drop mechanism an
interface chooses if it supports multiple drop mechanisms.
Higher values are preferred over lower values."
	::= { qosIfParameters 2 }


qosIfDropPreferenceEntry OBJECT-TYPE
	SYNTAX QosIfDropPreferenceEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An instance of this class specifies a drop preference for
a drop mechanism on an interface with a particular role
combination."
	INDEX { qosIfDropPreferenceId  }

	::= { qosIfDropPreferenceTable 1 }

qosIfDropPreferenceEntry ::=
	SEQUENCE {
		qosIfDropPreferenceId PolicyInstanceId,
		qosIfDropRoles RoleCombination,
		qosIfDropPreference INTEGER,
		qosIfDropDiscipline INTEGER
		}

qosIfDropPreferenceId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An integer index to identify the instance of the policy class."
	::= { qosIfDropPreferenceEntry 1 }


qosIfDropRoles OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The combination of roles the interface must have for this
policy instance to apply to that interface."
	::= { qosIfDropPreferenceEntry 2 }


qosIfDropPreference OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The preference to use this drop mechanism.  A higher value
means a higher preference.  If two mechanisms have the same
preference the choice is a local decision."
	::= { qosIfDropPreferenceEntry 3 }


qosIfDropDiscipline OBJECT-TYPE
	SYNTAX INTEGER {
	qosIfDropWRED(1),
	qosIfDropTailDrop(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An enumerate type for all the known drop mechanisms."
	::= { qosIfDropPreferenceEntry 4 }


qosIfDscpAssignmentTable OBJECT-TYPE
	SYNTAX SEQUENCE OF QosIfDscpAssignmentEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The assignment of each DSCP to a queue and threshold for each
interface queue type."
	::= { qosIfParameters 3 }


qosIfDscpAssignmentEntry OBJECT-TYPE
	SYNTAX QosIfDscpAssignmentEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An instance of this class specifies the queue and threshold
set for a packet with a particular DSCP on an interface of
a particular type with a particular role combination."
	INDEX { qosIfDscpAssignmentId  }

	::= { qosIfDscpAssignmentTable 1 }

qosIfDscpAssignmentEntry ::=
	SEQUENCE {
		qosIfDscpAssignmentId PolicyInstanceId,
		qosIfDscpRoles RoleCombination,
		qosIfQueueType QosInterfaceQueueType,
		qosIfDscp Dscp,
		qosIfQueue INTEGER,
		qosIfThresholdSet INTEGER
		}

qosIfDscpAssignmentId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An integer index to identify the instance of the policy class."
	::= { qosIfDscpAssignmentEntry 1 }


qosIfDscpRoles OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The role combination the interface must be configured with."
	::= { qosIfDscpAssignmentEntry 2 }


qosIfQueueType OBJECT-TYPE
	SYNTAX INTEGER {
	oneQ1t(1),
	oneQ2t(2),
	oneQ4t(3),
	oneQ8t(4),
	twoQ1t(5),
	twoQ2t(6),
	twoQ4t(7),
	twoQ8t(8),
	threeQ1t(9),
	threeQ2t(10),
	threeQ4t(11),
	threeQ8t(12),
	fourQ1t(13),
	fourQ2t(14),
	fourQ4t(15),
	fourQ8t(16),
	eightQ1t(17),
	eightQ2t(18),
	eightQ4t(19),
	eightQ8t(20),
	sixteenQ1t(21),
	sixteenQ2t(22),
	sixteenQ4t(23),
	sixtyfourQ1t(24),
	sixtyfourQ2t(25),
	sixtyfourQ4t(26),
	oneP1Q0t(27),
	oneP1Q4t(28),
	oneP1Q8t(29),
	oneP2Q1t(30),
	oneP2Q2t(31),
	oneP3Q1t(32),
	oneP7Q8t(33),
	oneP3Q8t(34)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The interface queue type to which this row applies."
	::= { qosIfDscpAssignmentEntry 3 }


qosIfDscp OBJECT-TYPE
	SYNTAX INTEGER (0..63)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The DSCP to which this row applies."
	::= { qosIfDscpAssignmentEntry 4 }


qosIfQueue OBJECT-TYPE
	SYNTAX INTEGER (1..64)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The queue to which the DSCP applies for the given interface
type."
	::= { qosIfDscpAssignmentEntry 5 }


qosIfThresholdSet OBJECT-TYPE
	SYNTAX INTEGER (1..8)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The threshold set of the specified queue to which the DSCP
applies for the given interface type."
	::= { qosIfDscpAssignmentEntry 6 }


qosIfRedTable OBJECT-TYPE
	SYNTAX SEQUENCE OF QosIfRedEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A class of lower and upper values for each threshold set in a
queue supporting WRED.  If the size of the queue for a given
threshold is below the lower value then packets assigned to
that threshold are always accepted into the queue.  If the
size of the queue is above upper value then packets are always
dropped.  If the size of the queue is between the lower and
the upper then packets are randomly dropped."
	::= { qosIfParameters 4 }


qosIfRedEntry OBJECT-TYPE
	SYNTAX QosIfRedEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An instance of this class specifies threshold limits for a
particular RED threshold of a given threshold set on an
interface and with a particular role combination."
	INDEX { qosIfRedId  }

	::= { qosIfRedTable 1 }

qosIfRedEntry ::=
	SEQUENCE {
		qosIfRedId PolicyInstanceId,
		qosIfRedRoles RoleCombination,
		qosIfRedNumThresholdSets ThresholdSetRange,
		qosIfRedThresholdSet INTEGER,
		qosIfRedThresholdSetLower Percent,
		qosIfRedThresholdSetUpper Percent
		}

qosIfRedId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An integer index to identify the instance of the policy class."
	::= { qosIfRedEntry 1 }


qosIfRedRoles OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The role combination the interface must be configured with."
	::= { qosIfRedEntry 2 }


qosIfRedNumThresholdSets OBJECT-TYPE
	SYNTAX INTEGER {
	zeroT(0),
	oneT(1),
	twoT(2),
	fourT(4),
	eightT(8)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The values in this entry apply only to queues with the number
of thresholds specified by this attribute."
	::= { qosIfRedEntry 3 }


qosIfRedThresholdSet OBJECT-TYPE
	SYNTAX INTEGER (1..8)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The threshold set to which the lower and upper values apply.
It must be in the range 1 through qosIfRedNumThresholdSets.
There must be exactly one PRI for each value in this range."
	::= { qosIfRedEntry 4 }


qosIfRedThresholdSetLower OBJECT-TYPE
	SYNTAX INTEGER (0..100)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The threshold value below which no packets are dropped."
	::= { qosIfRedEntry 5 }


qosIfRedThresholdSetUpper OBJECT-TYPE
	SYNTAX INTEGER (0..100)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The threshold value above which all packets are dropped."
	::= { qosIfRedEntry 6 }


qosIfTailDropTable OBJECT-TYPE
	SYNTAX SEQUENCE OF QosIfTailDropEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A class for threshold sets in a queue supporting tail drop.
If the size of the queue for a given threshold set is at or
below the specified value then packets assigned to that
threshold set are always accepted into the queue.  If the size
of the queue is above the specified value then packets are
always dropped."
	::= { qosIfParameters 5 }


qosIfTailDropEntry OBJECT-TYPE
	SYNTAX QosIfTailDropEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An instance of this class specifies the queue depth for a
particular tail-drop threshold set on an interface with a
particular role combination."
	INDEX { qosIfTailDropId  }

	::= { qosIfTailDropTable 1 }

qosIfTailDropEntry ::=
	SEQUENCE {
		qosIfTailDropId PolicyInstanceId,
		qosIfTailDropRoles RoleCombination,
		qosIfTailDropNumThresholdSets ThresholdSetRange,
		qosIfTailDropThresholdSet INTEGER,
		qosIfTailDropThresholdSetValue Percent
		}

qosIfTailDropId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An integer index to identify the instance of the policy class."
	::= { qosIfTailDropEntry 1 }


qosIfTailDropRoles OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The role combination the interface must be configured with."
	::= { qosIfTailDropEntry 2 }


qosIfTailDropNumThresholdSets OBJECT-TYPE
	SYNTAX INTEGER {
	zeroT(0),
	oneT(1),
	twoT(2),
	fourT(4),
	eightT(8)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The value in this entry applies only to queues with the
number of thresholds specified by this attribute."
	::= { qosIfTailDropEntry 3 }


qosIfTailDropThresholdSet OBJECT-TYPE
	SYNTAX INTEGER (1..8)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The threshold set to which the threshold value applies"
	::= { qosIfTailDropEntry 4 }


qosIfTailDropThresholdSetValue OBJECT-TYPE
	SYNTAX INTEGER (0..100)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The threshold value above which packets are dropped."
	::= { qosIfTailDropEntry 5 }


qosIfWeightsTable OBJECT-TYPE
	SYNTAX SEQUENCE OF QosIfWeightsEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A class of scheduling weights for each queue of an interface
that supports weighted round robin scheduling or a mix of
priority queueing and weighted round robin.  For a queue with
N priority queues, the N highest queue numbers are the
priority queues with the highest queue number having the
highest priority.  WRR is applied to the non-priority queues."
	::= { qosIfParameters 6 }


qosIfWeightsEntry OBJECT-TYPE
	SYNTAX QosIfWeightsEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An instance of this class specifies the scheduling weight for
a particular queue of an interface with a particular number
of queues and with a particular role combination."
	INDEX { qosIfWeightsId  }

	::= { qosIfWeightsTable 1 }

qosIfWeightsEntry ::=
	SEQUENCE {
		qosIfWeightsId PolicyInstanceId,
		qosIfWeightsRoles RoleCombination,
		qosIfWeightsNumQueues QueueRange,
		qosIfWeightsQueue INTEGER,
		qosIfWeightsDrainSize Unsigned32,
		qosIfWeightsQueueSize Unsigned32
		}

qosIfWeightsId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An integer index to identify the instance of the policy class."
	::= { qosIfWeightsEntry 1 }


qosIfWeightsRoles OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The role combination the interface must be configured with."
	::= { qosIfWeightsEntry 2 }


qosIfWeightsNumQueues OBJECT-TYPE
	SYNTAX INTEGER {
	oneQ(1),
	twoQ(2),
	threeQ(3),
	fourQ(4),
	eightQ(8),
	sixteenQ(16),
	thirtyTwoQ(32),
	sixtyFourQ(64)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The value of the weight in this instance applies only to
interfaces with the number of queues specified by this
attribute."
	::= { qosIfWeightsEntry 3 }


qosIfWeightsQueue OBJECT-TYPE
	SYNTAX INTEGER (1..64)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The queue to which the weight applies."
	::= { qosIfWeightsEntry 4 }


qosIfWeightsDrainSize OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum number of bytes that may be drained from the
queue in one cycle.  The percentage of the bandwith allocated
to this queue can be calculated from this attribute and the
sum of the drain sizes of all the non-priority queues of the
interface."
	::= { qosIfWeightsEntry 5 }


qosIfWeightsQueueSize OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The size of the queue in bytes.  Some devices set queue size
in terms of packets.  These devices must calculate the queue
size in packets by assuming an average packet size suitable
for the particular interface.

Some devices have a fixed size buffer to be shared among all
queues.  These devices must allocate a fraction of the
total buffer space to this queue calculated as the the ratio
of the queue size to the sum of the queue sizes for the
interface."
	::= { qosIfWeightsEntry 6 }


qosPIBCompliances OBJECT IDENTIFIER ::= { qosPIBConformance 1 }

qosPIBGroups OBJECT IDENTIFIER ::= { qosPIBConformance 2 }

qosDevicePibIncarnationTableGroup OBJECT IDENTIFIER ::= { qosPIBGroups 1 }

qosDeviceAttributeTableGroup OBJECT IDENTIFIER ::= { qosPIBGroups 2 }

qosInterfaceTypeTableGroup OBJECT IDENTIFIER ::= { qosPIBGroups 3 }

qosDiffServMappingTableGroup OBJECT IDENTIFIER ::= { qosPIBGroups 4 }

qosCosToDscpTableGroup OBJECT IDENTIFIER ::= { qosPIBGroups 5 }

qosUnmatchedPolicyTableGroup OBJECT IDENTIFIER ::= { qosPIBGroups 6 }

qosPolicerTableGroup OBJECT IDENTIFIER ::= { qosPIBGroups 7 }

qosAggregateTableGroup OBJECT IDENTIFIER ::= { qosPIBGroups 8 }

qosMacClassificationTableGroup OBJECT IDENTIFIER ::= { qosPIBGroups 9 }

qosIpAceTableGroup OBJECT IDENTIFIER ::= { qosPIBGroups 10 }

qosIpAclDefinitionTableGroup OBJECT IDENTIFIER ::= { qosPIBGroups 11 }

qosIpAclActionTableGroup OBJECT IDENTIFIER ::= { qosPIBGroups 12 }

qosIfSchedulingPreferencesTableGroup OBJECT IDENTIFIER ::= { qosPIBGroups 13 }

qosIfDropPreferenceTableGroup OBJECT IDENTIFIER ::= { qosPIBGroups 14 }

qosIfDscpAssignmentTableGroup OBJECT IDENTIFIER ::= { qosPIBGroups 15 }

qosIfRedTableGroup OBJECT IDENTIFIER ::= { qosPIBGroups 16 }

qosIfTailDropTableGroup OBJECT IDENTIFIER ::= { qosPIBGroups 17 }

qosIfWeightsTableGroup OBJECT IDENTIFIER ::= { qosPIBGroups 18 }

END