-- MIB created 3/21/96 14:37:01, by -- SMIC (the next generation) version 1.6.31, December 11, 1994. LAN-EMULATION-ELAN-MIB DEFINITIONS ::= BEGIN -- From file: "atm1129r5.mi2" IMPORTS Counter32, Integer32 FROM SNMPv2-SMI-v1 OBJECT-TYPE FROM RFC-1212 DisplayString, RowStatus, MacAddress, AutonomousType, TimeStamp FROM SNMPv2-TC-v1 LecDataFrameSize, LecDataFrameFormat, AtmLaneAddress, atmfLanEmulation, VpiInteger, VciInteger FROM LAN-EMULATION-CLIENT-MIB; elanMIB OBJECT IDENTIFIER ::= { atmfLanEmulation 2 } -- MODULE-IDENTITY -- LastUpdated -- 9602121200Z -- OrgName -- ATM Forum LAN Emulation Sub-Working Group -- ContactInfo -- -- The ATM Forum -- -- 2570 West El Camino Real, -- Ste 304, -- Mountain View, CA 94040-1313 -- Tel: 415-949-6711 -- E-mail: info@atmforum.com -- Descr -- This is the MIB module for managing ATM -- Emulated LANs as well as LAN Emulation -- Configuration Server (LECS). It provides -- mechanism for constructing and destroying -- ELANs, for distributing members of an -- ELAN and for figuring out the topology -- of an ELAN. It also provides management -- information for LECS. elanAdminGroup OBJECT IDENTIFIER ::= { elanMIB 1 } elanConfGroup OBJECT IDENTIFIER ::= { elanMIB 2 } elanLecsGroup OBJECT IDENTIFIER ::= { elanMIB 3 } elanLecsConfGroup OBJECT IDENTIFIER ::= { elanLecsGroup 1 } elanLecsFaultGroup OBJECT IDENTIFIER ::= { elanLecsGroup 2 } elanLecsStatGroup OBJECT IDENTIFIER ::= { elanLecsGroup 3 } elanAdminPolicyVal OBJECT IDENTIFIER ::= { elanAdminGroup 1 } byAtmAddr OBJECT IDENTIFIER ::= { elanAdminPolicyVal 1 } byMacAddr OBJECT IDENTIFIER ::= { elanAdminPolicyVal 2 } byRouteDescriptor OBJECT IDENTIFIER ::= { elanAdminPolicyVal 3 } byLanType OBJECT IDENTIFIER ::= { elanAdminPolicyVal 4 } byPktSize OBJECT IDENTIFIER ::= { elanAdminPolicyVal 5 } byElanName OBJECT IDENTIFIER ::= { elanAdminPolicyVal 6 } elanMIBConformance OBJECT IDENTIFIER ::= { elanMIB 4 } elanMIBGroups OBJECT IDENTIFIER ::= { elanMIBConformance 1 } elanMIBCompliances OBJECT IDENTIFIER ::= { elanMIBConformance 2 } IfIndexOrZero ::= INTEGER(0..65535) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- An integer defined as to equivalent -- to ifIndex in the ifTable defined -- in RFC 1213 and the value zero. ElanLocalIndex ::= Integer32 -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- A value which uniquely identifies a -- conceptual row in the elanConfTable. -- This number is only used locally by the agent to -- distinguish between ELANs. AtmLaneMask ::= OCTET STRING(SIZE(20)) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- A twenty-octet binary string, containing a standard -- ATM Forum address mask. TlvSelectorIndexType ::= Integer32 -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- An arbitrary integer used in identifying -- a set of TLV encoding. This number -- is locally managed by the agent. PolicySelectorIndexType ::= Integer32 -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- An arbitrary integer used in identifying -- a set of LEC assignment policies. -- This number is locally managed by the -- agent. LecsErrLogIndexType ::= Integer32(1..2147483647) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- An arbitrary integer used in identifying -- an error log associated with a LECS. elanConfNextId OBJECT-TYPE SYNTAX ElanLocalIndex -- Rsyntax Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "The next available ELAN index provided by the agent. The value of this object can be used as the index to the elanConfTable during creation." ::= { elanConfGroup 1 } elanConfTable OBJECT-TYPE SYNTAX SEQUENCE OF ElanConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all Emulated LANs (ELANs) this agent manages. An ELAN is defined by the ELAN name, a set of TLVs, and other parameters. After an ELAN is created, members of the ELAN such as the LAN Emulation Server (LES) or Client (LEC) can be added to this ELAN entry in their repective tables. There are four memebers to an ELAN and they are LECS, LES, BUS (Broadcast and Unknown Server ) and LEC. The support of LECS is optional. The addition and deletion of LECS is done in the elanLecsConfGroup defined in this MIB. The addition and deletion of the LEC are done in the LEC Assignment tables defined in this ELAN Configuration group. The addition and deletion of the LES are also defined in this group. The addition and deletion of the BUS are done in the LES MIB due to the fact that LEC learns the BUS address only from the LES it corresponds to." ::= { elanConfGroup 2 } elanConfEntry OBJECT-TYPE SYNTAX ElanConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry in this table represents an Emulated LAN. Objects elanConfIndex and elanConfRowStatus are required during row creation and deletion. " INDEX { elanConfIndex } ::= { elanConfTable 1 } ElanConfEntry ::= SEQUENCE { elanConfIndex ElanLocalIndex, elanConfName DisplayString, elanConfTlvIndex TlvSelectorIndexType, elanConfLanType LecDataFrameFormat, elanConfMaxFrameSize LecDataFrameSize, elanConfRowStatus RowStatus } elanConfIndex OBJECT-TYPE SYNTAX ElanLocalIndex -- Rsyntax Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "A value which uniquely identifies a conceptual row in the elanConfTable. If the conceptual row identified by this value of elanConfIndex is recreated following an agent restart, the same value of elanConfIndex must be used to identify the recreated row." ::= { elanConfEntry 1 } elanConfName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of this Emulated LAN entry. When this object length is zero then the ELAN name is not specified. The clients assigned to this ELAN will also have a zero length string as the ELAN name. The value of this object is used in the LE CONFIGURE response by the LECS if supported. Note that ELAN name may be used as cross reference to the LES MIB and BUS MIB though not required. Multiple ELANs with no ELAN name specified will cause conflicts in reference to LES and BUS MIBs." REFERENCE "LAN Emulation Over ATM Specification - version 1.0. C5." DEFVAL { "" } ::= { elanConfEntry 2 } elanConfTlvIndex OBJECT-TYPE SYNTAX TlvSelectorIndexType -- Rsyntax Integer32 ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object identifies one or more rows in the lecsTlvTable which applies to this ELAN. This object is set to zero if 1) LECS is not supported. or 2) there is no TLV associated with this entry." ::= { elanConfEntry 3 } elanConfLanType OBJECT-TYPE SYNTAX LecDataFrameFormat -- Rsyntax INTEGER { -- unspecified(1), -- aflane8023(2), -- aflane8025(3) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The LAN type of this ELAN entry." REFERENCE "LAN Emulation Over ATM Specification - version 1.0. S2." DEFVAL { unspecified } ::= { elanConfEntry 4 } elanConfMaxFrameSize OBJECT-TYPE SYNTAX LecDataFrameSize -- Rsyntax INTEGER { -- unspecified(1), -- max1516(2), -- max4544(3), -- max9234(4), -- max18190(5) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The maximum data frame size of this ELAN entry. The maximum AAL-5 SDU size of a data frame that this ELAN can support. The value of this object is returned to the LEC in the LE CONFIGURE response." REFERENCE "LAN Emulation Over ATM Specification - version 1.0. S3." DEFVAL { unspecified } ::= { elanConfEntry 5 } elanConfRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or delete entries in the elanConfTable." REFERENCE "RFC 1443, [10] Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2)." ::= { elanConfEntry 6 } elanLesTable OBJECT-TYPE SYNTAX SEQUENCE OF ElanLesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all LESs for each ELAN specified in the elanConfTable. Each ELAN can have more than one LES providing LAN Emulation services. Each LES can service only one ELAN. The table is indexed by the elanConfIndex which points to the ELAN this LES is providing service to, and elanLesIndex which unquely identifies a LES. This table is used for configuration of an ELAN only, that is, creating a LES in this table does not instantiate a LES in the network. It is done in the LES MIB." ::= { elanConfGroup 3 } elanLesEntry OBJECT-TYPE SYNTAX ElanLesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry in this table represents a LES/Emulated LAN pair. Object elanLesAtmAddress besides elanLesRowStatus is also required during row creation." INDEX { elanConfIndex, elanLesIndex } ::= { elanLesTable 1 } ElanLesEntry ::= SEQUENCE { elanLesIndex Integer32, elanLesAtmAddress AtmLaneAddress, elanLesRowStatus RowStatus } elanLesIndex OBJECT-TYPE SYNTAX Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "An arbitrary number which uniquely identifies the LES this entry pertains to." ::= { elanLesEntry 1 } elanLesAtmAddress OBJECT-TYPE SYNTAX AtmLaneAddress -- Rsyntax OCTET STRING(SIZE(0 | 20)) ACCESS read-write STATUS mandatory DESCRIPTION "The ATM address of the LES entry. If LECS is supported, the value of this object is the LES ATM address LECS returns to the LEC in the CONFIGURE response. If LECS is not supported, the value of this object pertains to the LES ATM address network manager provides to the LEC." DEFVAL { "" } ::= { elanLesEntry 2 } elanLesRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or delete entries in the elanLesfTable." REFERENCE "RFC 1443, [10] Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2)." ::= { elanLesEntry 3 } elanPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF ElanPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all policies this agent supports for assigning a LEC to an ELAN. A set of policies with the same or different priorities can be selected by the entity which provides ELAN configuration service such as the LECS. The policy with the highest priority or with the smallest elanPolicyPriority , is evaluated first. The policies with the same elanPolicyPriority are evaluated at the same time with the AND operation. When LECS receives a configure request, it checks it's policies selected from this table to determine which ELAN and LES the LEC will join. This table is indexed by a selector index and a policy index. The policy index unquely identifies a policy and the selector index allows multiple policies be selected by one LECS or an entity that is providing ELAN configuration service." ::= { elanConfGroup 4 } elanPolicyEntry OBJECT-TYPE SYNTAX ElanPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry in this table represents a policy supported by the entity which provides ELAN configuration services. Each policy can be used to evaluate the CONFIGURE request from the LEC in determining which ELAN it belongs to. " INDEX { elanPolicySelectorIndex, elanPolicyIndex } ::= { elanPolicyTable 1 } ElanPolicyEntry ::= SEQUENCE { elanPolicySelectorIndex PolicySelectorIndexType, elanPolicyIndex Integer32, elanPolicyPriority Integer32, elanPolicyType AutonomousType, elanPolicyRowStatus RowStatus } elanPolicySelectorIndex OBJECT-TYPE SYNTAX PolicySelectorIndexType -- Rsyntax Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "The value of this object indicates a group of policies that can be selected by the ELAN configuration service provider such as the LECS." ::= { elanPolicyEntry 1 } elanPolicyIndex OBJECT-TYPE SYNTAX Integer32(1..65000) ACCESS not-accessible STATUS mandatory DESCRIPTION "The value of this object uniquely identifies a single policy entry in this table. " ::= { elanPolicyEntry 2 } elanPolicyPriority OBJECT-TYPE SYNTAX Integer32(1..65000) ACCESS read-write STATUS mandatory DESCRIPTION "The priority of this policy entry. Policies are evaluated by the entity which provides ELAN configuration service (LECS) by their priorities. Policies with the same priority values should be evludated at the same time with an AND operation. That is, if one of the policy with the same priority is not met, the evluation should fail. The value 1 has the highest priority. " ::= { elanPolicyEntry 3 } elanPolicyType OBJECT-TYPE SYNTAX AutonomousType -- Rsyntax OBJECT IDENTIFIER ACCESS read-write STATUS mandatory DESCRIPTION " The value of this object must reference a definition of a type of policy. Some of such definition exist within the elanAdminPolicyVal subtree. Others may be defined within enterprise specific subtrees. The agent is not required to support every types defined within the elanAdminPolicyVal subtree." ::= { elanPolicyEntry 4 } elanPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or delete entries in the elanPolicyTable." REFERENCE "RFC 1443, [10] Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2)." ::= { elanPolicyEntry 5 } elanLecAtmAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF ElanLecAtmAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to assign a LEC to an ELAN by ATM address. When the by ATM address policy is used, this table is used to specify the LEC's ATM address or portion of an ATM address. The ATM address is used by the LECS or other entity which serves the LANE configuration function to determine the ELAN membership. This table is indexed by the elanConfIndex which points to the ELAN this LEC belongs, the elanLesIndex which points to the LES this LEC should join, the LEC's ATM address and an ATM address mask. Portions of ATM address can be used in dertermining ELAN membership by using both the ATM address and the mask." ::= { elanConfGroup 5 } elanLecAtmAddrEntry OBJECT-TYPE SYNTAX ElanLecAtmAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents a LEC to ELAN binding." INDEX { elanConfIndex, elanLesIndex, elanLecAtmAddress, elanLecAtmMask } ::= { elanLecAtmAddrTable 1 } ElanLecAtmAddrEntry ::= SEQUENCE { elanLecAtmAddress AtmLaneAddress, elanLecAtmMask AtmLaneAddress, elanLecAtmRowStatus RowStatus } elanLecAtmAddress OBJECT-TYPE SYNTAX AtmLaneAddress -- Rsyntax OCTET STRING(SIZE(0 | 20)) ACCESS not-accessible STATUS mandatory DESCRIPTION "The value of this object is the ATM address of a LAN Emulation client. This object and the object elanLecAtmMask are used to form an ATM address or portion of an ATM address to be used by the LECS in determining the ELAN membership when the policy of this LECS is by ATM address." ::= { elanLecAtmAddrEntry 1 } elanLecAtmMask OBJECT-TYPE SYNTAX AtmLaneAddress -- Rsyntax OCTET STRING(SIZE(0 | 20)) ACCESS read-write STATUS mandatory DESCRIPTION "The ATM address mask associated with the object elanLecAtmAddress. The value of the mask is an ATM address with the don't care portion set to zero and the valid ATM address portion set to one." ::= { elanLecAtmAddrEntry 2 } elanLecAtmRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or destroy entries in this table." REFERENCE "RFC 1443, [10] Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2)." ::= { elanLecAtmAddrEntry 4 } elanLecMacAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF ElanLecMacAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to assign a LEC to an ELAN by MAC address. When the byMacAddress policy is used, this table is used to specify the LEC's ELAN membership by ATM address. This table is indexed by the elanConfIndex which points to the ELAN this LEC belongs, the elanLesIndex which points to the LES this LEC should join, and the LEC's MAC address." ::= { elanConfGroup 6 } elanLecMacAddrEntry OBJECT-TYPE SYNTAX ElanLecMacAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents a LEC to ELAN binding." INDEX { elanConfIndex, elanLesIndex, elanLecMacAddress } ::= { elanLecMacAddrTable 1 } ElanLecMacAddrEntry ::= SEQUENCE { elanLecMacAddress MacAddress, elanLecMacRowStatus RowStatus } elanLecMacAddress OBJECT-TYPE SYNTAX MacAddress -- Rsyntax OCTET STRING(SIZE(6)) ACCESS not-accessible STATUS mandatory DESCRIPTION "The value of this object is the MAC address of a LAN Emulation client. When a CONFIGURE request is received with this MAC address, it will be assigned to the ELAN which elanConfIndex is pointing to." ::= { elanLecMacAddrEntry 1 } elanLecMacRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or destroy entries in this table." REFERENCE "RFC 1443, [10] Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2)." ::= { elanLecMacAddrEntry 2 } elanLecRdTable OBJECT-TYPE SYNTAX SEQUENCE OF ElanLecRdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to assign a LEC to an ELAN by Route Descriptor. When the by Route Descriptor policy is used, this table is used to specify the LEC's ELAN membership by Route Descriptor. This table is indexed by the elanConfIndex which points to the ELAN this LEC belongs, the elanLesIndex which points to the LES this LEC should join, and the LEC's Route Descriptors." ::= { elanConfGroup 7 } elanLecRdEntry OBJECT-TYPE SYNTAX ElanLecRdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents a LEC to ELAN binding. " INDEX { elanConfIndex, elanLesIndex, elanLecRdSegId, elanLecRdBridgeNum } ::= { elanLecRdTable 1 } ElanLecRdEntry ::= SEQUENCE { elanLecRdSegId Integer32, elanLecRdBridgeNum Integer32, elanLecRdRowStatus RowStatus } elanLecRdSegId OBJECT-TYPE SYNTAX Integer32(0..4095) ACCESS not-accessible STATUS mandatory DESCRIPTION "The LAN ID portion of the IEEE 802.5 route descriptor associated with this conceptual row." ::= { elanLecRdEntry 1 } elanLecRdBridgeNum OBJECT-TYPE SYNTAX Integer32(0..15) ACCESS not-accessible STATUS mandatory DESCRIPTION "The Bridge Number portion of the IEEE 802.5 route descriptor associated with this conceptual row." ::= { elanLecRdEntry 2 } elanLecRdRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or destroy entries in this table." REFERENCE "RFC 1443, [10] Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2)." ::= { elanLecRdEntry 4 } elanLecPktSizeTable OBJECT-TYPE SYNTAX SEQUENCE OF ElanLecPktSizeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to assign a LEC to an ELAN by Packet Size. When the by Packet Size policy is used, this table is used to specifythe LEC's ELAN membership by Packet Size. This table is indexed by the elanConfIndex which points to the ELAN this LEC belongs, the elanLesIndex which points to the LES this LEC should join, and the LEC's Packet Size." ::= { elanConfGroup 8 } elanLecPktSizeEntry OBJECT-TYPE SYNTAX ElanLecPktSizeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents a LEC to ELAN binding. " INDEX { elanConfIndex, elanLesIndex, elanLecFrameSize } ::= { elanLecPktSizeTable 1 } ElanLecPktSizeEntry ::= SEQUENCE { elanLecFrameSize LecDataFrameSize, elanLecPktSizeRowStatus RowStatus } elanLecFrameSize OBJECT-TYPE SYNTAX LecDataFrameSize -- Rsyntax INTEGER { -- unspecified(1), -- max1516(2), -- max4544(3), -- max9234(4), -- max18190(5) -- } ACCESS not-accessible STATUS mandatory DESCRIPTION "The maximum AAL-5 SDU size this LEC can support. " ::= { elanLecPktSizeEntry 1 } elanLecPktSizeRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or destroy entries in this table." REFERENCE "RFC 1443, [10] Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2)." ::= { elanLecPktSizeEntry 2 } elanLecNameTable OBJECT-TYPE SYNTAX SEQUENCE OF ElanLecNameEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to assign a LEC to an ELAN by ELAN name. When the by ELAN name policy is used, this table is used to specifythe LEC's ELAN membership by ELAN name. This table is indexed by the elanConfIndex which points to the ELAN this LEC belongs, the elanLesIndex which points to the LES this LEC should join, and the LEC's ELAN name." ::= { elanConfGroup 9 } elanLecNameEntry OBJECT-TYPE SYNTAX ElanLecNameEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents a LEC to ELAN binding. " INDEX { elanConfIndex, elanLesIndex, elanLecElanName } ::= { elanLecNameTable 1 } ElanLecNameEntry ::= SEQUENCE { elanLecElanName DisplayString, elanLecNameRowStatus RowStatus } elanLecElanName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS not-accessible STATUS mandatory DESCRIPTION "The name of the ELAN this LEC belongs. " ::= { elanLecNameEntry 1 } elanLecNameRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or destroy entries in this table." REFERENCE "RFC 1443, [10] Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2)." ::= { elanLecNameEntry 2 } lecsConfNextId OBJECT-TYPE SYNTAX ElanLocalIndex -- Rsyntax Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "The next available LECS index. The value of this object can be used as the index to the lecsTable during creation." ::= { elanLecsConfGroup 1 } lecsConfTable OBJECT-TYPE SYNTAX SEQUENCE OF LecsConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the configuration information of all LECS this agent manages. This table can also be used to create, delete or configure a LECS." ::= { elanLecsConfGroup 2 } lecsConfEntry OBJECT-TYPE SYNTAX LecsConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents a LECS this agent maintains. Objects lecsAtmIfIndex, lecsAtmAddrSpec, and lecsAtmAddrMask cannot be modified unless the lecsAdminStatus is set to down(2). And the change does not take effect until the lecsAdminStatus is set to up(1)." INDEX { lecsConfIndex } ::= { lecsConfTable 1 } LecsConfEntry ::= SEQUENCE { lecsConfIndex Integer32, lecsAtmIfIndex IfIndexOrZero, lecsAtmAddrSpec AtmLaneAddress, lecsAtmAddrMask AtmLaneMask, lecsAtmAddrActual AtmLaneAddress, lecsPolicySelIndex PolicySelectorIndexType, lecsLastInitialized TimeStamp, lecsOperStatus INTEGER, lecsAdminStatus INTEGER, lecsRowStatus RowStatus } lecsConfIndex OBJECT-TYPE SYNTAX Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "An arbitrary integer which represents a LECS this agent manages. If the conceptual row identified by this value of lecsConfIndex is recreated following an agent restart, the same value of elanConfIndex must be used to identify the recreated row." ::= { lecsConfEntry 1 } lecsAtmIfIndex OBJECT-TYPE SYNTAX IfIndexOrZero -- Rsyntax INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "An ATM interface which the LECS receives CONFIGURE requests from. This value must match an existing value in the ifTable. This object is set to zero when the ATM interface is not specified or there is more than one ATM interface used by the LECS." DEFVAL { '0'h } ::= { lecsConfEntry 2 } lecsAtmAddrSpec OBJECT-TYPE SYNTAX AtmLaneAddress -- Rsyntax OCTET STRING(SIZE(0 | 20)) ACCESS read-write STATUS mandatory DESCRIPTION "An ATM address specified by the network or local management that, with the ATM address mask, determines a portion of the ATM address that the LECS on the designated ATM interface will use to derive the actual ATM address from the network or ILMI. The derived ATM address is specified in the object lecsAtmAddrActual, which is used to receive CONFIGURE requests. The value of this object, if not specified, is defaulted to the well-known LECS ATM address specified in the LAN Emulation Spec. 1.0." DEFVAL { '4700790000000000000000000000A03E00000100'h } ::= { lecsConfEntry 3 } lecsAtmAddrMask OBJECT-TYPE SYNTAX AtmLaneMask -- Rsyntax OCTET STRING(SIZE(20)) ACCESS read-write STATUS mandatory DESCRIPTION "The ATM address mask associated with the object lecsAtmAddrSpec. The value of the mask is an ATM address with the don't care portion set to zero and the valid ATM address portion set to one." DEFVAL { 'FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF'h } ::= { lecsConfEntry 4 } lecsAtmAddrActual OBJECT-TYPE SYNTAX AtmLaneAddress -- Rsyntax OCTET STRING(SIZE(0 | 20)) ACCESS read-only STATUS mandatory DESCRIPTION " The resulting ATM address that the LECS is accepting CONFIGURE requests on the interface indicated by the object lecsAtmIfIndex. This address is the result of the specified ATM address, its mask and interaction through the ILMI with the switch. Note that this object is only valid when the corresponding lecsOperStatus is 'up'." ::= { lecsConfEntry 5 } lecsPolicySelIndex OBJECT-TYPE SYNTAX PolicySelectorIndexType -- Rsyntax Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "The set of policies used by this LECS in dertermining requesters ELAN membership. The policies are defined in the elanPolicyTable. The value of this object must exist in the elanPolicyTable." ::= { lecsConfEntry 6 } lecsLastInitialized OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of the sysUpTime since LECS has last entered the state indicated by the object lecsOperStatus." ::= { lecsConfEntry 7 } lecsOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), up(2), down(3) } ACCESS read-only STATUS mandatory DESCRIPTION " This object reflects the actual state of the LECS which may differ from that of the lecsAdminStatus object. This can occur when the interface ifOperStatus is 'down' but the corresponding lecsAdminStatus is 'up'." ::= { lecsConfEntry 8 } lecsAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the LECS on this interface as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desired state being reflected in the lecsOperStatus." DEFVAL { up } ::= { lecsConfEntry 9 } lecsRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or delete entries in this table." REFERENCE "RFC 1443, [10] Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2)." ::= { lecsConfEntry 10 } lecsElanTable OBJECT-TYPE SYNTAX SEQUENCE OF LecsElanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the mapping between ELANs and LECS. When a LECS is deleted from the lecsConfTable, all entries associated with this entry will also be deleted." ::= { elanLecsConfGroup 3 } lecsElanEntry OBJECT-TYPE SYNTAX LecsElanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents an ELAN to LECS mapping." INDEX { elanConfIndex, lecsConfIndex } ::= { lecsElanTable 1 } LecsElanEntry ::= SEQUENCE { elanLecsRowStatus RowStatus } elanLecsRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or delete an entry from this table." REFERENCE "RFC 1443, [10] Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2)." ::= { lecsElanEntry 1 } lecsTlvTable OBJECT-TYPE SYNTAX SEQUENCE OF LecsTlvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains currently configured sets of TLVs in this LECS. These sets can include not only the standard TLVs specified in the LAN Emulation Spec. 1.0 [1] but also the additional parameters exchanged between the LECS and LEC. This table is indexed by a selector index, which allows more than one TLV to be selected by an ELAN; and the TLV tag, which specified the type of the TLV; and a TLV index which is used to distinguish between different entries with the same TLV tag. How does the LECS treat the TLVs that are not specified in this table in the CONFIGURE requests are not defined in this MIB." ::= { elanLecsConfGroup 4 } lecsTlvEntry OBJECT-TYPE SYNTAX LecsTlvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents a set of TLV encodings for an ELAN represented by the elanConfIndex. Objects lecsTlvVal and lecsTlvRowStatus are required during row creation." INDEX { lecsTlvSelectorIndex, lecsTlvTag, lecsTlvIndex } ::= { lecsTlvTable 1 } LecsTlvEntry ::= SEQUENCE { lecsTlvSelectorIndex TlvSelectorIndexType, lecsTlvTag OCTET STRING, lecsTlvIndex Integer32, lecsTlvVal OCTET STRING, lecsTlvRowStatus RowStatus } lecsTlvSelectorIndex OBJECT-TYPE SYNTAX TlvSelectorIndexType -- Rsyntax Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "The value of this object indicates a group of TLVs that can be selected." ::= { lecsTlvEntry 1 } lecsTlvTag OBJECT-TYPE SYNTAX OCTET STRING(SIZE(4)) ACCESS not-accessible STATUS mandatory DESCRIPTION "The value of this object represents the type of the contents of the lecsTlvVal field in the entry. The OUI field in this object occupies the first ( or most significant )3 octets. The OUI value 00-A0-3E is used for the standard values defined by the ATM Forum specification." ::= { lecsTlvEntry 2 } lecsTlvIndex OBJECT-TYPE SYNTAX Integer32(1..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "The index of this TLV encoding entry. The value of this object can be used to distinguish between different entries with the same lecsTlvTag value." ::= { lecsTlvEntry 3 } lecsTlvVal OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..1024)) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this TLV entry. Note that the length is implied by the length of the OCTET STRING." ::= { lecsTlvEntry 4 } lecsTlvRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or destroy entries in this table. " REFERENCE "RFC 1443, [10] Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2)." ::= { lecsTlvEntry 5 } lecsVccTable OBJECT-TYPE SYNTAX SEQUENCE OF LecsVccEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all the CONFIG VCCs of the LECS. The CONFIG VCC is used by the LEC to send/ receive ATM LE CONFIGURE request/response to/from the LECS. This table is writable if PVC is used and read only if SVC is used. " ::= { elanLecsConfGroup 5 } lecsVccEntry OBJECT-TYPE SYNTAX LecsVccEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents a CONFIG VCC between a pair of LEC and LECS." INDEX { lecsConfIndex, lecsVccIfIndex, lecsVccVpi, lecsVccVci } ::= { lecsVccTable 1 } LecsVccEntry ::= SEQUENCE { lecsVccIfIndex IfIndexOrZero, lecsVccVpi VpiInteger, lecsVccVci VciInteger, lecsVccRowStatus RowStatus } lecsVccIfIndex OBJECT-TYPE SYNTAX IfIndexOrZero -- Rsyntax INTEGER(0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM interface which the CONFIG VCC is established. This value must be an existing value in the ifTable. The value of this object is set to zero when the ATM interface is an internal connection. " ::= { lecsVccEntry 1 } lecsVccVpi OBJECT-TYPE SYNTAX VpiInteger -- Rsyntax INTEGER(0..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "The VPI value of the CONFIG VCC. The object lecsVccIfIndex, lecsVccVci and this object uniquely identifies a VCC within an ATM system." ::= { lecsVccEntry 2 } lecsVccVci OBJECT-TYPE SYNTAX VciInteger -- Rsyntax INTEGER(0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "The VCI value of the CONFIG VCC. The object lecsVccIfIndex, lecsVccVpi and this object uniquely identifies a VCC within an ATM system " ::= { lecsVccEntry 3 } lecsVccRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or destroy entries in this table. " REFERENCE "RFC 1443, [10] Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2)." ::= { lecsVccEntry 4 } lecsStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF LecsStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " A (conceptual) table of statistics associated with all LECS instances on the device." ::= { elanLecsStatGroup 1 } lecsStatsEntry OBJECT-TYPE SYNTAX LecsStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " A (conceptual) row in the lecsStatsTable which corresponds to the statistics kept by a particular instance of a LECS." INDEX { lecsConfIndex } -- Augments lecsConfEntry ::= { lecsStatsTable 1 } LecsStatsEntry ::= SEQUENCE { lecsStatSuccessful Counter32, lecsStatInBadFrames Counter32, lecsStatInvalidParam Counter32, lecsStatInsufRes Counter32, lecsStatAccDenied Counter32, lecsStatInvalidReq Counter32, lecsStatInvalidDest Counter32, lecsStatInvalidAddr Counter32, lecsStatNoConf Counter32, lecsStatConfError Counter32, lecsStatInsufInfo Counter32 } lecsStatSuccessful OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of CONFIGURE requests successfully granted since the agent was last initialized." ::= { lecsStatsEntry 1 } lecsStatInBadFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of mal formed CONFIGURE requests dropped by the LECS." ::= { lecsStatsEntry 2 } lecsStatInvalidParam OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of CONFIGURE requests rejected due to the invalid request parameters error." REFERENCE "LAN Emulation Over ATM Spec. v1.0. Table 13" ::= { lecsStatsEntry 3 } lecsStatInsufRes OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of CONFIGURE requests rejected due to the insufficent resources to grant request error." REFERENCE "LAN Emulation Over ATM Spec. v1.0. Table 13" ::= { lecsStatsEntry 4 } lecsStatAccDenied OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of CONFIGURE requests rejected due to the access denied error." REFERENCE "LAN Emulation Over ATM Spec. v1.0. Table 13" ::= { lecsStatsEntry 5 } lecsStatInvalidReq OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of CONFIGURE requests rejected due to the invalid requester-id error." REFERENCE "LAN Emulation Over ATM Spec. v1.0. Table 13" ::= { lecsStatsEntry 6 } lecsStatInvalidDest OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of CONFIGURE requests rejected due to the invalid destination error." REFERENCE "LAN Emulation Over ATM Spec. v1.0. Table 13" ::= { lecsStatsEntry 7 } lecsStatInvalidAddr OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of CONFIGURE requests rejected due to the invalid ATM address error." REFERENCE "LAN Emulation Over ATM Spec. v1.0. Table 13" ::= { lecsStatsEntry 8 } lecsStatNoConf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of CONFIGURE requests rejected due to the LE Client is not recognized error." REFERENCE "LAN Emulation Over ATM Spec. v1.0. Table 13" ::= { lecsStatsEntry 9 } lecsStatConfError OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of CONFIGURE requests rejected due to the LE_CONFIGURE error." REFERENCE "LAN Emulation Over ATM Spec. v1.0. Table 13" ::= { lecsStatsEntry 10 } lecsStatInsufInfo OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of CONFIGURE requests rejected due to the insufficient information error." REFERENCE "LAN Emulation Over ATM Spec. v1.0. Table 13" ::= { lecsStatsEntry 11 } lecsErrCtlTable OBJECT-TYPE SYNTAX SEQUENCE OF LecsErrCtlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains error log control information of all LECS instances. This table is an extention to the lecsConfTable. It is used to enable or disable error logs for a particular LECS entry." ::= { elanLecsFaultGroup 1 } lecsErrCtlEntry OBJECT-TYPE SYNTAX LecsErrCtlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents a LECS entry in the lecsConfTable." INDEX { lecsConfIndex } -- Augments lecsConfEntry ::= { lecsErrCtlTable 1 } LecsErrCtlEntry ::= SEQUENCE { lecsErrCtlAdminStatus INTEGER, lecsErrCtlOperStatus INTEGER, lecsErrCtlClearLog INTEGER, lecsErrCtlMaxEntries INTEGER, lecsErrCtlLastEntry LecsErrLogIndexType } lecsErrCtlAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to enable/disable error logging for the LECS." ::= { lecsErrCtlEntry 1 } lecsErrCtlOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), active(2), outOfRes(3), failed(4), disabled(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This object is used to indicate the result of a set operation to the object lecsErrCtlAdminStatus. If the error log was successfully started, it is in active(2) mode. Otherwise, it is set to either outOfRes(3) or failed(4) for the respective reasons." ::= { lecsErrCtlEntry 2 } lecsErrCtlClearLog OBJECT-TYPE SYNTAX INTEGER { noOp(1), clear(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to clear the error log entries associated with this LECS." ::= { lecsErrCtlEntry 3 } lecsErrCtlMaxEntries OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum entries of the error log a LECS can support." ::= { lecsErrCtlEntry 4 } lecsErrCtlLastEntry OBJECT-TYPE SYNTAX LecsErrLogIndexType -- Rsyntax Integer32(1..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The index to the last entry in the error log table associated with this LECS." ::= { lecsErrCtlEntry 5 } lecsErrLogTable OBJECT-TYPE SYNTAX SEQUENCE OF LecsErrLogEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains error logs of the LECS instances enabled in the lecsErrCtlTable. This table is indexed by the LECS instance index and an arbitrary integer uniquely identifies an error log." ::= { elanLecsFaultGroup 2 } lecsErrLogEntry OBJECT-TYPE SYNTAX LecsErrLogEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents a LEC that was rejected due to a violation against the policies or an error." INDEX { lecsConfIndex, lecsErrLogIndex } ::= { lecsErrLogTable 1 } LecsErrLogEntry ::= SEQUENCE { lecsErrLogIndex LecsErrLogIndexType, lecsErrLogAtmAddr AtmLaneAddress, lecsErrLogErrCode INTEGER, lecsErrLogTime TimeStamp } lecsErrLogIndex OBJECT-TYPE SYNTAX LecsErrLogIndexType -- Rsyntax Integer32(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer which uniquely identifies an error log entry. The first entry after reset or clearing the error log is an assigned value (2^32-1). Succeding entries are assigned with descending values consecutively. Entries after 1 are discarded.The enabling/disabling of the error log capability is done in the lecsErrCtlTable." ::= { lecsErrLogEntry 1 } lecsErrLogAtmAddr OBJECT-TYPE SYNTAX AtmLaneAddress -- Rsyntax OCTET STRING(SIZE(0 | 20)) ACCESS read-only STATUS mandatory DESCRIPTION "The ATM address of the requester which sends the CONFIGURE request and causes the error to occur. The corresponding error code is specified in the object lecsErrLogErrCode." ::= { lecsErrLogEntry 2 } lecsErrLogErrCode OBJECT-TYPE SYNTAX INTEGER(0..22) ACCESS read-only STATUS mandatory DESCRIPTION "The Error code which indicates the cause of the error triggered by the CONFIGURE request sent by the requester indicated by the value of the object lecsErrLogAtmAddr." ::= { lecsErrLogEntry 3 } lecsErrLogTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The sysUpTime when this entry was logged by the LECS." ::= { lecsErrLogEntry 4 } elanCConfGroup OBJECT IDENTIFIER ::= { elanMIBGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing configuration -- information about an Emulated LAN. -- objects -- elanConfNextId, elanConfName, elanConfTlvIndex, -- elanConfLanType, elanConfMaxFrameSize, elanConfRowStatus, -- elanLecPktSizeRowStatus, elanLecNameRowStatus, -- elanLesAtmAddress, elanLesRowStatus, elanPolicyPriority, -- elanPolicyType, elanPolicyRowStatus elanLecAssignByAtmGroup OBJECT IDENTIFIER ::= { elanMIBGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing ATM addresses -- of LECs. -- objects -- elanLecAtmRowStatus, elanLecAtmMask elanLecAssignByMacGroup OBJECT IDENTIFIER ::= { elanMIBGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing MAC addresses -- of LECs. -- objects -- elanLecMacRowStatus elanLecAssignByRdGroup OBJECT IDENTIFIER ::= { elanMIBGroups 4 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing Route Descriptors -- of LECs. -- objects -- elanLecRdRowStatus lecsCStatGroup OBJECT IDENTIFIER ::= { elanMIBGroups 5 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing information -- about LECS statistics. -- objects -- lecsStatSuccessful, lecsStatInBadFrames, lecsStatInvalidParam, -- lecsStatInsufRes, lecsStatAccDenied, lecsStatInvalidReq, -- lecsStatInvalidDest, lecsStatInvalidAddr, lecsStatNoConf, -- lecsStatConfError, lecsStatInsufInfo lecsCGroup OBJECT IDENTIFIER ::= { elanMIBGroups 6 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A group of objects used for LECS -- management only. -- objects -- lecsConfNextId, lecsAtmIfIndex, lecsAtmAddrSpec, -- lecsAtmAddrMask, lecsAtmAddrActual, elanLecsRowStatus, -- lecsPolicySelIndex, lecsTlvVal, lecsTlvRowStatus, -- lecsVccRowStatus, lecsLastInitialized, lecsOperStatus, -- lecsAdminStatus, lecsRowStatus lecsCFaultGroup OBJECT IDENTIFIER ::= { elanMIBGroups 7 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A group of objects used for LECS -- fault management only. -- objects -- lecsErrCtlAdminStatus, lecsErrCtlOperStatus, -- lecsErrCtlClearLog, lecsErrCtlMaxEntries, lecsErrCtlLastEntry, -- lecsErrLogTime, lecsErrLogIndex, lecsErrLogAtmAddr, -- lecsErrLogErrCode elanMIBCompliance OBJECT IDENTIFIER ::= { elanMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for SNMP -- entities which support ATM LAN Emulation -- ELAN MIB. -- Module -- >>current<< -- MandGroup -- elanCConfGroup -- OptGroup -- elanLecAssignByAtmGroup -- OptGroup -- elanLecAssignByMacGroup -- OptGroup -- elanLecAssignByRdGroup -- OptGroup -- lecsCStatGroup -- OptGroup -- lecsCGroup -- OptGroup -- lecsCFaultGroup END LAN-EMULATION-LES-MIB DEFINITIONS ::= BEGIN -- From file: "atm1129r5.mi2" IMPORTS Counter32, Integer32 FROM SNMPv2-SMI-v1 OBJECT-TYPE FROM RFC-1212 DisplayString, RowStatus, MacAddress, TruthValue, TimeStamp FROM SNMPv2-TC-v1 LeArpTableEntryType, AtmLaneAddress, VpiInteger, VciInteger, atmfLanEmulation FROM LAN-EMULATION-CLIENT-MIB IfIndexOrZero, AtmLaneMask FROM LAN-EMULATION-ELAN-MIB; lesMIB OBJECT IDENTIFIER ::= { atmfLanEmulation 3 } -- MODULE-IDENTITY -- LastUpdated -- 9602121200Z -- OrgName -- ATM Forum LAN Emulation Sub-Working Group -- ContactInfo -- -- The ATM Forum -- -- 2570 West EL camino Real, -- Ste 304, Mountain View, -- CA 94040-1313, USA -- Tel: 415-578-6860 -- E-mail: info@atmforum.com -- Descr -- This is the MIB module for managing ATM -- LAN Emulation Servers. lesConfGroup OBJECT IDENTIFIER ::= { lesMIB 1 } lesStatGroup OBJECT IDENTIFIER ::= { lesMIB 2 } lesLecStatGroup OBJECT IDENTIFIER ::= { lesMIB 3 } lesFaultGroup OBJECT IDENTIFIER ::= { lesMIB 4 } lesMIBConformance OBJECT IDENTIFIER ::= { lesMIB 5 } lesMIBGroups OBJECT IDENTIFIER ::= { lesMIBConformance 1 } lesMIBCompliances OBJECT IDENTIFIER ::= { lesMIBConformance 2 } LecId ::= INTEGER(0..65279) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- C14 LE Client Identifier. BusConfIndex ::= Integer32 -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- A value which uniquely identifies a BUS. -- This number is only used locally by the agent to -- distinguish between BUSs. LesLocalIndex ::= Integer32 -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- A value which uniquely identifies a -- conceptual row in the lesConfTable. -- This number is only used locally by the agent to -- distinguish between LESs. LesLecDataFrameFormat ::= INTEGER { aflane8023(2), aflane8025(3) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- A 'LAN Type' value. -- -- S2 LAN Type. The type of LAN that the LE Server is servicing. -- Refer -- ATM Forum LAN Emulation Over ATM Specification, V1.0, -- Section 5.1.2. LesLecDataFrameSize ::= INTEGER { max1516(2), max4544(3), max9234(4), max18190(5) } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- A 'Maximum Data Frame Size' value. -- -- S3 Maximum Data Frame Size. The maximum AAL-5 SDU size. -- Refer -- ATM Forum LAN Emulation Over ATM Specification, V1.0, -- Section 5.1.2. LesErrLogIndexType ::= Integer32(1..2147483647) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- An arbitrary integer used in identifying -- an erro log associated with a LES. lesConfNextId OBJECT-TYPE SYNTAX LesLocalIndex -- Rsyntax Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "The next available LES index. The value of this object can be used as the index by the network manager to create an entry in the lesConfTable." ::= { lesConfGroup 1 } lesConfTable OBJECT-TYPE SYNTAX SEQUENCE OF LesConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all LAN Emulation Servers this agent manages. The LES is one of the components in the Emulated LAN which implements the control coordination function. It is the address resolution server for a given ELAN. The LES provides a facility for registering and resolving MAC addresses and/or route descriptors to ATM addresses. There can be multiple LES per ELAN but a LES can serve only one ELAN." ::= { lesConfGroup 2 } lesConfEntry OBJECT-TYPE SYNTAX LesConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry in this table represents a LES. The parameters in each entry apply to one emulated LAN served by one LES. Objects lesLanType and lesMaxFrameSize are also required besides lesRowStatus during row creation." INDEX { lesConfIndex } ::= { lesConfTable 1 } LesConfEntry ::= SEQUENCE { lesConfIndex LesLocalIndex, lesAtmAddrSpec AtmLaneAddress, lesAtmAddrMask AtmLaneMask, lesAtmAddrActual AtmLaneAddress, lesElanName DisplayString, lesLanType LesLecDataFrameFormat, lesLastChange TimeStamp, lesMaxFrameSize LesLecDataFrameSize, lesControlTimeOut INTEGER, lesOperStatus INTEGER, lesAdminStatus INTEGER, lesRowStatus RowStatus } lesConfIndex OBJECT-TYPE SYNTAX LesLocalIndex -- Rsyntax Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "A value which uniquely identifies a conceptual row in the lesConfTable. If the conceptual row identified by this value of lesConfIndex is recreated following an agent restart, the same value of lesConfIndex must be used to identify the recreated row." ::= { lesConfEntry 1 } lesAtmAddrSpec OBJECT-TYPE SYNTAX AtmLaneAddress -- Rsyntax OCTET STRING(SIZE(0 | 20)) ACCESS read-write STATUS mandatory DESCRIPTION "An ATM address specified by the network or local management that, with the ATM address mask, determines a portion of the ATM address that the LES on the designated ATM interface will use to derive the actual ATM address from the network or ILMI. The derived ATM address is specified in the object lesAtmAddrActual, which is used to receive ATM ARP requests." REFERENCE "LAN Emulation Over ATM Specification - version 1.0. S1." ::= { lesConfEntry 2 } lesAtmAddrMask OBJECT-TYPE SYNTAX AtmLaneMask -- Rsyntax OCTET STRING(SIZE(20)) ACCESS read-write STATUS mandatory DESCRIPTION "The ATM address mask associated with the object lesAtmAddrSpec. The value of the mask is an ATM address with the don't care portion set to zero and the valid ATM address portion set to one." REFERENCE "LAN Emulation Over ATM Specification - version 1.0. S1." DEFVAL { 'FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF'h } ::= { lesConfEntry 3 } lesAtmAddrActual OBJECT-TYPE SYNTAX AtmLaneAddress -- Rsyntax OCTET STRING(SIZE(0 | 20)) ACCESS read-only STATUS mandatory DESCRIPTION " The resultant ATM address in use by the LES. This object is a product of the specified ATM address, mask and interaction with the network. This object is created by the agent." REFERENCE "LAN Emulation Over ATM Specification - version 1.0. S1." ::= { lesConfEntry 4 } lesElanName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the Emulated LAN this LES is providing service for. This object may be used to identify the ELAN the LES is in." REFERENCE "LAN Emulation Over ATM Specification - version 1.0. C5." DEFVAL { "" } ::= { lesConfEntry 5 } lesLanType OBJECT-TYPE SYNTAX LesLecDataFrameFormat -- Rsyntax INTEGER { -- aflane8023(2), -- aflane8025(3) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The type of the ATM Emulated LAN this LES is providing service to." REFERENCE "LAN Emulation Over ATM Specification - version 1.0. S2." ::= { lesConfEntry 6 } lesLastChange OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime when this LES has entered the state indicated by the object lesOperStatus." ::= { lesConfEntry 7 } lesMaxFrameSize OBJECT-TYPE SYNTAX LesLecDataFrameSize -- Rsyntax INTEGER { -- max1516(2), -- max4544(3), -- max9234(4), -- max18190(5) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The maximum AAL-5 SDU size of a data frame that the LE service can guarantee not to drop because it is too large." REFERENCE "LAN Emulation Over ATM Specification - version 1.0. S3." ::= { lesConfEntry 8 } lesControlTimeOut OBJECT-TYPE SYNTAX INTEGER(10..300) -- Units -- “seconds ACCESS read-write STATUS mandatory DESCRIPTION "Time out period used for timing out most request/response control frame interactions. This is the time a Client has to issue a join request to a LES after a control direct VCC is established with a LES." REFERENCE "LAN Emulation Over ATM Specification - version 1.0. S4." DEFVAL { 120 } ::= { lesConfEntry 9 } lesOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), up(2), down(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The operational state of this LES entry. When in 'up' state the LES will respond to LEC requests. Any other state the LES is notavailable for service and may release all the existing VCCs and refuse service to all clients." ::= { lesConfEntry 11 } lesAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(2), down(3) } ACCESS read-write STATUS mandatory DESCRIPTION " The desired state of the designated LES as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desired state being reflected in the lesOperStatus." DEFVAL { up } ::= { lesConfEntry 12 } lesRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or delete entries in the elanConfTable." REFERENCE "RFC 1443, [10] Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2)." ::= { lesConfEntry 13 } lesVccTable OBJECT-TYPE SYNTAX SEQUENCE OF LesVccEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all the Control Distribute VCCs used by the LES to distribute control traffic to the participating LECs. The Control Distribute VCC can either be point-to-point or point-to- multipoint calls. This table is read only if SVCs are used and writable if PVCs are used." ::= { lesConfGroup 3 } lesVccEntry OBJECT-TYPE SYNTAX LesVccEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry in this table represents a LES entry and it's associated Control Distribute VCC. " INDEX { lesConfIndex, lesVccAtmIfIndex, lesVccCtlDistVpi, lesVccCtlDistVci } ::= { lesVccTable 1 } LesVccEntry ::= SEQUENCE { lesVccAtmIfIndex IfIndexOrZero, lesVccCtlDistVpi VpiInteger, lesVccCtlDistVci VciInteger, lesVccRowStatus RowStatus } lesVccAtmIfIndex OBJECT-TYPE SYNTAX IfIndexOrZero -- Rsyntax INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The ATM interface which the Control Distribute VCC is running on. This value must match an existing value in the ifTable. The value of this object is set to zero when the ATM interface is an internal connection." ::= { lesVccEntry 1 } lesVccCtlDistVpi OBJECT-TYPE SYNTAX VpiInteger -- Rsyntax INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The VPI value of the Control Distribute VCC. The object lesVccAtmIfIndex, lesVccCtlDistVci and the value of this object uniquely identfies a VCC within a ATM host." ::= { lesVccEntry 2 } lesVccCtlDistVci OBJECT-TYPE SYNTAX VciInteger -- Rsyntax INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The VCI value of the Control Distribute VCC. The object lesVccAtmIfIndex, lesVccCtlDistVci and the value of this object uniquely identfies a VCC within a ATM host." ::= { lesVccEntry 3 } lesVccRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or delete entries in the elanConfTable." REFERENCE "RFC 1443, [10] Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2)." ::= { lesVccEntry 4 } lesBusTable OBJECT-TYPE SYNTAX SEQUENCE OF LesBusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the BUSs paired with the LESs found in the lesConfTable. The BUS (Broadcast and Unknown Server) handles data sent by a LE client to the broadcast MAC address, all multicast traffic, and initial unicast frames which are sent by a LAN Emulation Client before the data direct target ATM address has been resolved." ::= { lesConfGroup 4 } lesBusEntry OBJECT-TYPE SYNTAX LesBusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry in this table represents aLES/BUS pair. Object lesBusAddress is required duringrow creation. This table is indexed by lesConfIndex and lesBusConfIndexto show the pairing relationship betweenthe LES and BUS." INDEX { lesConfIndex, lesBusConfIndex } ::= { lesBusTable 1 } LesBusEntry ::= SEQUENCE { lesBusConfIndex BusConfIndex, lesBusAddress AtmLaneAddress } lesBusConfIndex OBJECT-TYPE SYNTAX BusConfIndex -- Rsyntax Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "A value which uniquely identifies a BUS ATM address. If the BUS ATM address identified by this value of lesBusConfIndex is recreated following an agent restart, the same value of lesBusConfIndex must be used to identify the recreated BUS ATM address." ::= { lesBusEntry 1 } lesBusAddress OBJECT-TYPE SYNTAX AtmLaneAddress -- Rsyntax OCTET STRING(SIZE(0 | 20)) ACCESS read-only STATUS mandatory DESCRIPTION "The ATM address of the BUS. This BUS is associated with LES specified by the lesConfIndex. A BUS may have several ATM addresses, this object provides the ATM address the LES returns in response to the LE-ARP request by the LEC." REFERENCE "LAN Emulation Over ATM Specification - version 1.0. S6." ::= { lesBusEntry 2 } lesLeArpMacTable OBJECT-TYPE SYNTAX SEQUENCE OF LesLeArpMacEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides access to an ATM LAN Emulation Server's MAC-to-ATM ARP table. It contains entries for unicast addressed, the broadcast address. When the entry is for broadcast MAC address the corresponding ATM address is of a BUS. When the entry is for unicast MAC address the corresponding ATM address represents a LEC." ::= { lesConfGroup 5 } lesLeArpMacEntry OBJECT-TYPE SYNTAX LesLeArpMacEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An ATM LAN Emulation ARP table entry containing information about the binding of one MAC address to one ATM address." INDEX { lesConfIndex, lesLeArpMacAddr } ::= { lesLeArpMacTable 1 } LesLeArpMacEntry ::= SEQUENCE { lesLeArpMacAddr MacAddress, lesLeArpLecId LecId, lesLeArpAtmAddr AtmLaneAddress, lesLeArpEntryType LeArpTableEntryType, lesLeArpRowStatus RowStatus } lesLeArpMacAddr OBJECT-TYPE SYNTAX MacAddress -- Rsyntax OCTET STRING(SIZE(6)) ACCESS not-accessible STATUS mandatory DESCRIPTION "The MAC address for which this table entry provides a translation. Since ATM LAN Emulation uses an LE ARP protocol to locate the Broadcast and Unknown Server, the value of this object could be the broadcast MAC address. MAC addresses should be unique within any given ATM Emulated LAN. However, there's no requirement that they be unique across disjoint emulated LANs." ::= { lesLeArpMacEntry 1 } lesLeArpLecId OBJECT-TYPE SYNTAX LecId -- Rsyntax INTEGER(0..65279) ACCESS read-only STATUS mandatory DESCRIPTION "The LE Client Identifier (LECID) of this entry. Each LE Client requires a LECID assigned by the LE Server during the Join phase. If this entry is for a BUS then this object value will be zero." ::= { lesLeArpMacEntry 2 } lesLeArpAtmAddr OBJECT-TYPE SYNTAX AtmLaneAddress -- Rsyntax OCTET STRING(SIZE(0 | 20)) ACCESS read-write STATUS mandatory DESCRIPTION "The ATM address of the Broadcast & Unknown Server or LAN Emulation Client whose MAC address is stored in 'lesLeArpMacAddr'. This volume may be registered by a LAN Emulation Client or specified by network management." ::= { lesLeArpMacEntry 3 } lesLeArpEntryType OBJECT-TYPE SYNTAX LeArpTableEntryType -- Rsyntax INTEGER { -- other(1), -- learnedViaControl(2), -- learnedViaData(3), -- staticVolatile(4), -- staticNonVolatile(5) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to indicate how this LE-ARP entry was created. The possible values for this object are: viaRegister(1), - agent staticVolatile(2), - network manager staticNonVolatile(3) - network manager This object is filled in by agent or network manager depending on the type." REFERENCE "LAN Emulation Client MIB definition." DEFVAL { staticVolatile } ::= { lesLeArpMacEntry 4 } lesLeArpRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or delete entries in the elanConfTable." REFERENCE "RFC 1443, [10] Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2)." ::= { lesLeArpMacEntry 5 } lesLeArpRdTable OBJECT-TYPE SYNTAX SEQUENCE OF LesLeArpRdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides access to an ATM LAN Emulation Server's RouteDescriptor-to-ATM ARP cache. The entries in this table are set-up by the agent or network manager depending on the entry type. The Route Descriptors are presented as Segment Id (ring number) and Bridge number." ::= { lesConfGroup 6 } lesLeArpRdEntry OBJECT-TYPE SYNTAX LesLeArpRdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An ATM LAN Emulation ARP cache entry containing information about the binding of one Route Descriptor to one ATM address." INDEX { lesConfIndex, lesLeArpRdSegId, lesLeArpRdBridgeNum } ::= { lesLeArpRdTable 1 } LesLeArpRdEntry ::= SEQUENCE { lesLeArpRdSegId INTEGER, lesLeArpRdBridgeNum INTEGER, lesLeArpRdLecId LecId, lesLeArpRdAtmAddr AtmLaneAddress, lesLeArpRdEntryType LeArpTableEntryType, lesLeArpRdRowStatus RowStatus } lesLeArpRdSegId OBJECT-TYPE SYNTAX INTEGER(0..4095) ACCESS not-accessible STATUS mandatory DESCRIPTION "The LAN ID (ring number) portion of the IEEE 802.5 route descriptor associated with this LES." ::= { lesLeArpRdEntry 1 } lesLeArpRdBridgeNum OBJECT-TYPE SYNTAX INTEGER(0..15) ACCESS not-accessible STATUS mandatory DESCRIPTION "The Bridge Number portion of the IEEE 802.5 route descriptor associated with this LES." ::= { lesLeArpRdEntry 2 } lesLeArpRdLecId OBJECT-TYPE SYNTAX LecId -- Rsyntax INTEGER(0..65279) ACCESS read-only STATUS mandatory DESCRIPTION "The LE Client Identifier (LECID) of this entry. Each LE Client requires a LECID assigned by the LE Server during the Join phase. " ::= { lesLeArpRdEntry 3 } lesLeArpRdAtmAddr OBJECT-TYPE SYNTAX AtmLaneAddress -- Rsyntax OCTET STRING(SIZE(0 | 20)) ACCESS read-write STATUS mandatory DESCRIPTION "The ATM address associated with the Route Descriptor." ::= { lesLeArpRdEntry 4 } lesLeArpRdEntryType OBJECT-TYPE SYNTAX LeArpTableEntryType -- Rsyntax INTEGER { -- other(1), -- learnedViaControl(2), -- learnedViaData(3), -- staticVolatile(4), -- staticNonVolatile(5) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to indicate how this LE-ARP entry was learned: viaRegister(1), - agent staticVolatile(2), - network manager staticNonVolatile(3) - network manager This object is filled in by agent or network manager depending on the type." DEFVAL { staticVolatile } ::= { lesLeArpRdEntry 5 } lesLeArpRdRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or delete entries in the elanConfTable." REFERENCE "RFC 1443, [10] Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2)." ::= { lesLeArpRdEntry 6 } lesLecTableLastChange OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUptime when an entry was created/deleted." ::= { lesConfGroup 7 } lesLecTable OBJECT-TYPE SYNTAX SEQUENCE OF LesLecEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all LAN Emulation clients serviced by LESs specified in the lesConfTable. This table can be used to retrieve the topology of an ELAN, in particular, the LES to LECs mapping information. An entry in this table is filled in by the agent when a LEC registers successfully with the LES. Objects lesLecCtlDirectVpi and lesLecCtlDirectVci can be modified by the network manager after creation if PVC is used." ::= { lesConfGroup 8 } lesLecEntry OBJECT-TYPE SYNTAX LesLecEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents a LANE client to LES binding." INDEX { lesConfIndex, lesLecIndex } ::= { lesLecTable 1 } LesLecEntry ::= SEQUENCE { lesLecIndex INTEGER, lesLecAtmAddr AtmLaneAddress, lesLecProxy TruthValue, lesLecId LecId, lesLecAtmIfIndex IfIndexOrZero, lesLecCtlDirectVpi VpiInteger, lesLecCtlDirectVci VciInteger, lesLecLastChange TimeStamp, lesLecState INTEGER, lesLecRowStatus RowStatus } lesLecIndex OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "An arbitrary integer which uniquely identifies a LEC in this table." ::= { lesLecEntry 1 } lesLecAtmAddr OBJECT-TYPE SYNTAX AtmLaneAddress -- Rsyntax OCTET STRING(SIZE(0 | 20)) ACCESS read-only STATUS mandatory DESCRIPTION "The ATM address of the LANE client. This is the primary ATM address of the LEC used in joining phase." REFERENCE "ATM Forum LAN Emulation Over ATM Specification, V1.0, Section 5.4.3" ::= { lesLecEntry 2 } lesLecProxy OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Whether this client is acting as a proxy. Proxy clients are allowed to represent unregistered MAC addresses, and receive copies of LE_ARP_REQUEST packets for such addresses." REFERENCE "ATM Forum LAN Emulation Over ATM Specification, V1.0, Section 5.1.1" DEFVAL { false } ::= { lesLecEntry 3 } lesLecId OBJECT-TYPE SYNTAX LecId -- Rsyntax INTEGER(0..65279) ACCESS read-only STATUS mandatory DESCRIPTION "The LE Client Identifier (LECID) of this entry. Each LE Client requires a LECID assigned by the LE Server during the Join phase. The LECID is placed in control requests by the LE Client and MAY be used for echo suppression on multicast data frames sent by that LE Client." DEFVAL { 0 } ::= { lesLecEntry 4 } lesLecAtmIfIndex OBJECT-TYPE SYNTAX IfIndexOrZero -- Rsyntax INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The ifIndex of ATM port where this LEC entry has established the control direct VCC to the LES. The value of this object maps to an existing ifIndex value in the ifTable of MIB-II. When an internal connection is used, this object is set to zero." ::= { lesLecEntry 5 } lesLecCtlDirectVpi OBJECT-TYPE SYNTAX VpiInteger -- Rsyntax INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION " The VPI of the bi-directional control direct connection between the LEC and LES." ::= { lesLecEntry 6 } lesLecCtlDirectVci OBJECT-TYPE SYNTAX VciInteger -- Rsyntax INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION " The VCI of the bi-directional control direct connection between the LEC and LES." ::= { lesLecEntry 7 } lesLecLastChange OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime of this entry when the LEC enters the state indicated by the object lesLecState." ::= { lesLecEntry 8 } lesLecState OBJECT-TYPE SYNTAX INTEGER { other(1), noLesConnect(2), lesConnect(3), joining(4), addLec(5), joinedLes(6) } ACCESS read-only STATUS mandatory DESCRIPTION "This object is used to indicate the status this LEC entry is in from the LES's perspective. The state of this object is updated by the agent as it discovers various phases of this LEC." ::= { lesLecEntry 9 } lesLecRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION " This object provides a way for the network manager to selectively remove a LE Client from the designated LES. Or in a system where PVCs are used, this table is used to configure Control Direct VCCs between LES and LEC." REFERENCE "RFC 1443, [10] Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2)." ::= { lesLecEntry 10 } lesStatTable OBJECT-TYPE SYNTAX SEQUENCE OF LesStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all counters the LES maintain. This table is an extention to the lesConfTable. It provides performance and fault counters on a per LES basis." ::= { lesStatGroup 1 } lesStatEntry OBJECT-TYPE SYNTAX LesStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry in this table contains a LES and its counters." INDEX { lesConfIndex } -- Augments lesConfEntry ::= { lesStatTable 1 } LesStatEntry ::= SEQUENCE { lesStatJoinOk Counter32, lesStatVerNotSup Counter32, lesStatInvalidReqParam Counter32, lesStatDupLanDest Counter32, lesStatDupAtmAddr Counter32, lesStatInsRes Counter32, lesStatAccDenied Counter32, lesStatInvalidReqId Counter32, lesStatInvalidLanDest Counter32, lesStatInvalidAtmAddr Counter32, lesStatInBadPkts Counter32, lesStatOutRegFails Counter32, lesStatLeArpIn Counter32, lesStatLeArpFwd Counter32 } lesStatJoinOk OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of successful Join responses send out by the LAN Emulation Server." ::= { lesStatEntry 1 } lesStatVerNotSup OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of version not supported errors." REFERENCE "ATM Forum LAN Emulation Over ATM Specification, V1.0, Table 13." ::= { lesStatEntry 2 } lesStatInvalidReqParam OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of invalid request parameters errors." REFERENCE "ATM Forum LAN Emulation Over ATM Specification, V1.0, Table 13." ::= { lesStatEntry 3 } lesStatDupLanDest OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of duplicate LAN destination errors." ::= { lesStatEntry 4 } lesStatDupAtmAddr OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of duplicate ATM address errors." REFERENCE "ATM Forum LAN Emulation Over ATM Specification, V1.0, Table 13." ::= { lesStatEntry 5 } lesStatInsRes OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of insufficient resources to grant errors." REFERENCE "ATM Forum LAN Emulation Over ATM Specification, V1.0, Table 13." ::= { lesStatEntry 6 } lesStatAccDenied OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of access denied for security reasons errors." REFERENCE "ATM Forum LAN Emulation Over ATM Specification, V1.0, Table 13." ::= { lesStatEntry 7 } lesStatInvalidReqId OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of invalid LEC ID errors." REFERENCE "ATM Forum LAN Emulation Over ATM Specification, V1.0, Table 13." ::= { lesStatEntry 8 } lesStatInvalidLanDest OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of invalid LAN destination errors." REFERENCE "ATM Forum LAN Emulation Over ATM Specification, V1.0, Table 13." ::= { lesStatEntry 9 } lesStatInvalidAtmAddr OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of invalid ATM address errors." REFERENCE "ATM Forum LAN Emulation Over ATM Specification, V1.0, Table 13." ::= { lesStatEntry 10 } lesStatInBadPkts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of mal formed ATM ARP requests received by the LES." ::= { lesStatEntry 11 } lesStatOutRegFails OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of registration failures sent out by this LES." ::= { lesStatEntry 12 } lesStatLeArpIn OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of LE_ARP_REQUEST frames the LES has accepted since its last initialization." ::= { lesStatEntry 13 } lesStatLeArpFwd OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of LE_ARP_REQUESTs that the LES forwarded onto the clients (either via the control distribute or individually over each control direct) rather than answering directly. This may be due to implementation decision (forward all requests) or because the resolution to the request did not reside in the LES's LE ARP cache." ::= { lesStatEntry 14 } lesLecStatTable OBJECT-TYPE SYNTAX SEQUENCE OF LesLecStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all LE-ARP request related counters and error counts on a per LEC-LES pair basis." ::= { lesLecStatGroup 1 } lesLecStatEntry OBJECT-TYPE SYNTAX LesLecStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry in this table represents a LEC and its ARP counters. This table is an extention to the lesLecTable." INDEX { lesConfIndex, lesLecIndex } -- Augments lesLecEntry ::= { lesLecStatTable 1 } LesLecStatEntry ::= SEQUENCE { lesLecRecvs Counter32, lesLecSends Counter32, lesLecInRegReq Counter32, lesLecInUnReg Counter32, lesLecInLeArpUcast Counter32, lesLecInLeArpBcast Counter32, lesLecInLeArpResp Counter32, lesLecInNarp Counter32 } lesLecRecvs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of requests received from this LEC. This includes all control frames as well as LE-ARP requests." ::= { lesLecStatEntry 1 } lesLecSends OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of requests or responses sent to the LEC entry from this LES." ::= { lesLecStatEntry 3 } lesLecInRegReq OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of Register requests received from this LEC. " ::= { lesLecStatEntry 4 } lesLecInUnReg OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of UnRegister requests received from this LEC. " ::= { lesLecStatEntry 5 } lesLecInLeArpUcast OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of LE-ARP requests for UNICAST address received from this LEC. " ::= { lesLecStatEntry 6 } lesLecInLeArpBcast OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of LE-ARP requests for MULTICAST and Broadcast address received from this LEC. " ::= { lesLecStatEntry 7 } lesLecInLeArpResp OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of LE-ARP responses received from this LEC. " ::= { lesLecStatEntry 8 } lesLecInNarp OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of NARP requests received from this LEC. " ::= { lesLecStatEntry 10 } lesErrCtlTable OBJECT-TYPE SYNTAX SEQUENCE OF LesErrCtlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains error log control information of all LES instances. This table is an extention to the lesConfTable. It is used to enable or disable error logs for a particular LES entry." ::= { lesFaultGroup 1 } lesErrCtlEntry OBJECT-TYPE SYNTAX LesErrCtlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents a LES entry in the lesConfTable." INDEX { lesConfIndex } -- Augments lesConfEntry ::= { lesErrCtlTable 1 } LesErrCtlEntry ::= SEQUENCE { lesErrCtlAdminStatus INTEGER, lesErrCtlOperStatus INTEGER, lesErrCtlClearLog INTEGER, lesErrCtlMaxEntries INTEGER, lesErrCtlLastEntry LesErrLogIndexType } lesErrCtlAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to enable/disable error logging for the LES." ::= { lesErrCtlEntry 1 } lesErrCtlOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), active(2), outOfRes(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object is used to indicate the result of a set operation to the object lesErrCtlAdminStatus. If the error log was successfully started, it is in active(2) mode. Otherwise, it is set to either outOfRes(3) or failed(4) for the respective reasons." ::= { lesErrCtlEntry 2 } lesErrCtlClearLog OBJECT-TYPE SYNTAX INTEGER { noOp(1), clear(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to clear the error log entries associated with this LES." ::= { lesErrCtlEntry 3 } lesErrCtlMaxEntries OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum entries of the error log a LES can support." ::= { lesErrCtlEntry 4 } lesErrCtlLastEntry OBJECT-TYPE SYNTAX LesErrLogIndexType -- Rsyntax Integer32(1..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The index to the last entry in the error log table for this LES." ::= { lesErrCtlEntry 5 } lesErrLogTable OBJECT-TYPE SYNTAX SEQUENCE OF LesErrLogEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains error logs of the LES instances enabled in the lesErrCtlTable. This table is indexed by the LES instance index and an arbitrary integer uniquely identifies an error log." ::= { lesFaultGroup 2 } lesErrLogEntry OBJECT-TYPE SYNTAX LesErrLogEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents a JOIN or REGISTER that was rejected due to an error." INDEX { lesConfIndex, lesErrLogIndex } ::= { lesErrLogTable 1 } LesErrLogEntry ::= SEQUENCE { lesErrLogIndex LesErrLogIndexType, lesErrLogAtmAddr AtmLaneAddress, lesErrLogErrCode INTEGER, lesErrLogTime TimeStamp } lesErrLogIndex OBJECT-TYPE SYNTAX LesErrLogIndexType -- Rsyntax Integer32(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer which uniquely identifies an error log entry. The first entry after reset or clearing the error log is an assigned value (2^32-1). Succeding entries are assigned with descending values consecutively. Entries after 1 are discarded. The enabling/disabling of the error log capability is done in the lesErrCtlTable." ::= { lesErrLogEntry 1 } lesErrLogAtmAddr OBJECT-TYPE SYNTAX AtmLaneAddress -- Rsyntax OCTET STRING(SIZE(0 | 20)) ACCESS read-only STATUS mandatory DESCRIPTION "The ATM address of the requester which sends the JOIN or REGISTER request and causes the error to occur. The corresponding error code is specified in the object lesErrLogErrCode." ::= { lesErrLogEntry 2 } lesErrLogErrCode OBJECT-TYPE SYNTAX INTEGER(0..22) ACCESS read-only STATUS mandatory DESCRIPTION "The Error code which indicates the cause of the error triggered by the JOIN or REGISTER request sent by the requester indicated by the value of the object lesErrLogAtmAddr." ::= { lesErrLogEntry 3 } lesErrLogTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The sysUpTime when this entry was logged by the LES." ::= { lesErrLogEntry 4 } lesCConfGroup OBJECT IDENTIFIER ::= { lesMIBGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing configuration -- information about the LAN Emulation Services. -- objects -- lesConfNextId, lesAtmAddrSpec, lesAtmAddrMask, -- lesAtmAddrActual, lesElanName, lesLanType, lesLastChange, -- lesControlTimeOut, lesMaxFrameSize, lesVccAtmIfIndex, -- lesVccCtlDistVpi, lesVccCtlDistVci, lesVccRowStatus, -- lesOperStatus, lesAdminStatus, lesRowStatus, lesBusAddress, -- lesLeArpLecId, lesLeArpAtmAddr, lesLeArpEntryType, -- lesLeArpRowStatus, lesLecTableLastChange, lesLecAtmIfIndex, -- lesLecProxy, lesLecAtmAddr, lesLecId, lesLecCtlDirectVpi, -- lesLecCtlDirectVci, lesLecLastChange, lesLecRowStatus, -- lesLecState lesRdGroup OBJECT IDENTIFIER ::= { lesMIBGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A group of objects used for 802.5 -- ATM LAN Emulation management only. -- objects -- lesLeArpRdLecId, lesLeArpRdAtmAddr, lesLeArpRdEntryType, -- lesLeArpRdRowStatus lesCStatGroup OBJECT IDENTIFIER ::= { lesMIBGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing -- monitoring information about the -- LES. -- objects -- lesStatJoinOk, lesStatInBadPkts, lesStatOutRegFails, -- lesStatVerNotSup, lesStatInvalidReqParam, lesStatDupLanDest, -- lesStatDupAtmAddr, lesStatInsRes, lesStatAccDenied, -- lesStatInvalidReqId, lesStatInvalidLanDest, -- lesStatInvalidAtmAddr, lesStatLeArpIn, lesStatLeArpFwd lesLecCStatGroup OBJECT IDENTIFIER ::= { lesMIBGroups 4 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing -- monitoring information about the -- LEC to/from LES traffic. -- objects -- lesLecRecvs, lesLecSends, lesLecInRegReq, lesLecInUnReg, -- lesLecInLeArpUcast, lesLecInLeArpBcast, lesLecInLeArpResp, -- lesLecInNarp lesFaultCGroup OBJECT IDENTIFIER ::= { lesMIBGroups 5 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing -- fault management for the LES. -- objects -- lesErrCtlAdminStatus, lesErrCtlOperStatus, lesErrCtlClearLog, -- lesErrCtlMaxEntries, lesErrCtlLastEntry, lesErrLogIndex, -- lesErrLogAtmAddr, lesErrLogErrCode, lesErrLogTime lesMIBCompliance OBJECT IDENTIFIER ::= { lesMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for SNMP -- entities which support the ATM LAN Emulation -- LES MIB. -- Module -- >>current<< -- MandGroup -- lesCConfGroup -- MandGroup -- lesCStatGroup -- MandGroup -- lesLecCStatGroup -- MandGroup -- lesFaultCGroup -- ObjVar -- lesVccCtlDistVpi -- ObjVar -- lesVccCtlDistVci -- ObjVar -- lesVccRowStatus -- ObjVar -- lesLecAtmIfIndex -- ObjVar -- lesLecCtlDirectVpi -- ObjVar -- lesLecCtlDirectVci -- ObjVar -- lesLecRowStatus -- OptGroup -- lesRdGroup END LAN-EMULATION-BUS-MIB DEFINITIONS ::= BEGIN -- From file: "atm1129r5.mi2" IMPORTS Counter32, Integer32 FROM SNMPv2-SMI-v1 OBJECT-TYPE FROM RFC-1212 RowStatus, DisplayString, TimeStamp FROM SNMPv2-TC-v1 AtmLaneAddress, VpiInteger, VciInteger, atmfLanEmulation FROM LAN-EMULATION-CLIENT-MIB IfIndexOrZero, AtmLaneMask FROM LAN-EMULATION-ELAN-MIB; busMIB OBJECT IDENTIFIER ::= { atmfLanEmulation 4 } -- MODULE-IDENTITY -- LastUpdated -- 9602121200Z -- OrgName -- ATM Forum LAN Emulation Sub-Working Group -- ContactInfo -- -- The ATM Forum -- -- 2570 West El Camino Real, Ste 304, -- Mountain View, CA 94040-1313 -- E-mail: info@atmforum.com -- Descr -- The MIB module for the management of LANE broadcast and -- known servers. This MIB should be used in conjunction -- with the ELAN and LES MIBs. busConfGroup OBJECT IDENTIFIER ::= { busMIB 1 } busStatGroup OBJECT IDENTIFIER ::= { busMIB 2 } busFaultGroup OBJECT IDENTIFIER ::= { busMIB 3 } busMIBConformance OBJECT IDENTIFIER ::= { busMIB 4 } busMIBGroups OBJECT IDENTIFIER ::= { busMIBConformance 1 } busMIBCompliances OBJECT IDENTIFIER ::= { busMIBConformance 2 } BusLocalIndex ::= Integer32 -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- An unique number identifying an -- BUS. This number is only -- used locally by the agent to -- distinguish between BUS. BusErrLogIndexType ::= Integer32(1..2147483647) -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr -- An arbitrary integer used in identifying -- an erro log associated with a BUS. busConfNextId OBJECT-TYPE SYNTAX BusLocalIndex -- Rsyntax Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "The next available BUS index. The value of this object can be used as the index by the network manager to create an entry in the busConfTable." ::= { busConfGroup 1 } busConfTable OBJECT-TYPE SYNTAX SEQUENCE OF BusConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all LAN Emulation Broadcast and Unknown Servers (BUS) this agent manages. The BUS handles data sent by an LE Client to the broadcast MAC address, all multicast traffic, and initial unicast frames which are sent by a LEC before the data direct target ATM address has been resolved. There can be multiple BUSs per ELAN, but a BUS can service only one ELAN." ::= { busConfGroup 2 } busConfEntry OBJECT-TYPE SYNTAX BusConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry in this table represents a BUS. The parameters in each entry apply to one emulated LAN served by one BUS. Object busRowStatus is required during row creation and deletion. Object busElanName is used to indicate the ELAN this BUS is servicing and is used to cross reference tables defined in the LAN Emulation Server MIB. Note that objects busAtmAddrSpec and busAtmAddrMask are used to configure the ATM address of a BUS. The BUS typically derives it's ATM address from the switch or the network and the actual ATM address used is indicated in the object busAtmAddrActual." INDEX { busConfIndex } ::= { busConfTable 1 } BusConfEntry ::= SEQUENCE { busConfIndex BusLocalIndex, busConfAtmAddrSpec AtmLaneAddress, busConfAtmAddrMask AtmLaneMask, busConfAtmAddrActual AtmLaneAddress, busConfElanName DisplayString, busConfLastChange TimeStamp, busConfMaxFrameAge INTEGER, busConfOperStatus INTEGER, busConfAdminStatus INTEGER, busConfRowStatus RowStatus } busConfIndex OBJECT-TYPE SYNTAX BusLocalIndex -- Rsyntax Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "A value which uniquely identifies a conceptual row in the busConfTable. If the conceptual row identified by this value of busConfIndex is recreated following an agent restart, the same value of busConfIndex must be used to identify the recreated row." ::= { busConfEntry 1 } busConfAtmAddrSpec OBJECT-TYPE SYNTAX AtmLaneAddress -- Rsyntax OCTET STRING(SIZE(0 | 20)) ACCESS read-write STATUS mandatory DESCRIPTION "An ATM address specified by the network or local management that, with the ATM address mask, determines a portion of the ATM address that the BUS on the designated ATM interface will use to derive the actual ATM address from the network or ILMI. The derived ATM address is specified in the object busAtmAddrActual, which is used to receive multicast or broadcast traffic." ::= { busConfEntry 2 } busConfAtmAddrMask OBJECT-TYPE SYNTAX AtmLaneMask -- Rsyntax OCTET STRING(SIZE(20)) ACCESS read-write STATUS mandatory DESCRIPTION "The ATM address mask associated with the object busAtmAddrSpec. The value of the mask is an ATM address with the don't care portion set to zero and the valid ATM address portion set to one." DEFVAL { 'FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF'h } ::= { busConfEntry 3 } busConfAtmAddrActual OBJECT-TYPE SYNTAX AtmLaneAddress -- Rsyntax OCTET STRING(SIZE(0 | 20)) ACCESS read-only STATUS mandatory DESCRIPTION " The resultant ATM address in use by the BUS. This object is a product of the specified ATM address, mask and interaction with the network. This object is created by the agent." ::= { busConfEntry 4 } busConfElanName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the ELAN this BUS is providing service to." ::= { busConfEntry 5 } busConfLastChange OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of the sysUpTime when this BUS has entered the state indicated by the object busConfOperStatus." ::= { busConfEntry 6 } busConfMaxFrameAge OBJECT-TYPE SYNTAX INTEGER(1..4) ACCESS read-write STATUS mandatory DESCRIPTION "Time out period for a frame that has been received but not been transmitted by BUS to all relevant Multicast Send VCCs or Multicast Forward VCCs." REFERENCE "LAN Emulation Over ATM Specification - version 1.0. S5." DEFVAL { 1 } ::= { busConfEntry 7 } busConfOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), up(2), down(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The operational state of this BUS entry. When in 'up' state the BUS will forward LEC traffic. Any other state the BUS is not available for service and may release all the existing VCCs and refuse service to all clients." ::= { busConfEntry 8 } busConfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(2), down(3) } ACCESS read-write STATUS mandatory DESCRIPTION " The desired state of the designated BUS as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desired state being reflected in the busOperStatus." DEFVAL { up } ::= { busConfEntry 9 } busConfRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or delete entries in the busConfTable." REFERENCE "RFC 1443, [10] Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2)." ::= { busConfEntry 10 } busVccTable OBJECT-TYPE SYNTAX SEQUENCE OF BusVccEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all the Multicast Forward VCCs used by the BUS to forward multicast traffic to the participating LECs. The Multicast Forward VCC can either be point-to-point or point-to- multipoint calls. This table is read only if SVCs are used and writable if PVCs are used." ::= { busConfGroup 3 } busVccEntry OBJECT-TYPE SYNTAX BusVccEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry in this table represents a Multicast Forward VCC of the BUS." INDEX { busConfIndex, busVccAtmIfIndex, busVccMtFwdVpi, busVccMtFwdVci } ::= { busVccTable 1 } BusVccEntry ::= SEQUENCE { busVccAtmIfIndex IfIndexOrZero, busVccMtFwdVpi VpiInteger, busVccMtFwdVci VciInteger, busVccRowStatus RowStatus } busVccAtmIfIndex OBJECT-TYPE SYNTAX IfIndexOrZero -- Rsyntax INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The ATM interface which the Multicast Forward VCC is running on. This value must match an existing value in the ifTable. The value of this object is set to zero when the ATM interface is undefined." ::= { busVccEntry 1 } busVccMtFwdVpi OBJECT-TYPE SYNTAX VpiInteger -- Rsyntax INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The VPI value of the Multicast Forward VCC. The object busVccAtmIfIndex, busVccMtFwdVci and the value of this object uniquely identfies a VCC within a ATM host." ::= { busVccEntry 2 } busVccMtFwdVci OBJECT-TYPE SYNTAX VciInteger -- Rsyntax INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The VCI value of the Multicast Forward VCC. The object busVccAtmIfIndex, busVccMtFwdVpi and the value of this object uniquely identfies a VCC within a ATM host." ::= { busVccEntry 3 } busVccRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create or delete entries in the busConfTable." REFERENCE "RFC 1443, [10] Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2)." ::= { busVccEntry 4 } busLecTableLastChange OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime when an entry of the busLecTable was created/deleted." ::= { busConfGroup 4 } busLecTable OBJECT-TYPE SYNTAX SEQUENCE OF BusLecEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " This table contains the BUS and the actual LECs being serviced by the BUS. It can be used as the actual mapping between BUS and LEC. This table provides information for Multicast send VCCs between BUS and clients. Objects busLecMcastSendAtmIfIndex, busLecMcastSendVpi, and busLecMcstSendVci can only be modified if PVC is used." ::= { busConfGroup 5 } busLecEntry OBJECT-TYPE SYNTAX BusLecEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents a BUS to LEC mapping." INDEX { busConfIndex, busLecAtmAddr } ::= { busLecTable 1 } BusLecEntry ::= SEQUENCE { busLecAtmAddr AtmLaneAddress, busLecMcastSendAtmIfIndex IfIndexOrZero, busLecMcastSendVpi VpiInteger, busLecMcastSendVci VciInteger, busLecRowStatus RowStatus } busLecAtmAddr OBJECT-TYPE SYNTAX AtmLaneAddress -- Rsyntax OCTET STRING(SIZE(0 | 20)) ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM address of the LEC. This is the primary ATM address of the LEC." ::= { busLecEntry 1 } busLecMcastSendAtmIfIndex OBJECT-TYPE SYNTAX IfIndexOrZero -- Rsyntax INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The ATM interface index this BUS uses for Multicast Send traffic. The value of this object has to exist in the ifTable in MIB II unless an internal connection is used. When an internal connection is used, this object is set to zero." ::= { busLecEntry 2 } busLecMcastSendVpi OBJECT-TYPE SYNTAX VpiInteger -- Rsyntax INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION " The virtual path identifier used to receive multicast traffic by this BUS." ::= { busLecEntry 4 } busLecMcastSendVci OBJECT-TYPE SYNTAX VciInteger -- Rsyntax INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION " The virtual channel identifier used to receive multicast traffic by this BUS." ::= { busLecEntry 5 } busLecRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION " This object provides a way for the network manager to selectively remove a LE Client from the designated BUS. Or in a system where PVCs are used, this table is used to create Multicast Send VCCs between BUS and LEC." ::= { busLecEntry 6 } busStatTable OBJECT-TYPE SYNTAX SEQUENCE OF BusStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all counters the BUS maintain. This table is an extention to the busConfTable." ::= { busStatGroup 1 } busStatEntry OBJECT-TYPE SYNTAX BusStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry in this table contains a BUS and its counters." INDEX { busConfIndex } -- Augments busConfEntry ::= { busStatTable 1 } BusStatEntry ::= SEQUENCE { busStatInDiscards Counter32, busStatInOctets Counter32, busStatInUcastFrms Counter32, busStatInMcastFrms Counter32, busStatFrmTimeOuts Counter32, busStatMcastSendRefused Counter32, busStatMcastFwdFailure Counter32 } busStatInDiscards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION " The number of frames discarded due to resource error." ::= { busStatEntry 1 } busStatInOctets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION " The number of octets that this BUS has received since its initialization." ::= { busStatEntry 2 } busStatInUcastFrms OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION " The number of frames that the BUS has received which were unicast data frames and all control frames (i.e. they were flooded from the client)." ::= { busStatEntry 3 } busStatInMcastFrms OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION " The number of frames that the BUS has received which were multicast frames." ::= { busStatEntry 4 } busStatFrmTimeOuts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION " The number of frames dropped by the BUS due to time out." ::= { busStatEntry 5 } busStatMcastSendRefused OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION " The number of multicast send VCCconnection setup attempts to the BUS which were refused." ::= { busStatEntry 6 } busStatMcastFwdFailure OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION " The number of multicast forward VCCconnection setup attempts from the BUS which were unsuccessful for any reason." ::= { busStatEntry 7 } busLecStatTable OBJECT-TYPE SYNTAX SEQUENCE OF BusLecStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all LEC counters the BUS maintains. This table can also be used to retrieve all LECs a BUS is providing service to." ::= { busStatGroup 2 } busLecStatEntry OBJECT-TYPE SYNTAX BusLecStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry in this table represents a LEC and its counters." INDEX { busConfIndex, busLecAtmAddr } -- Augments busLecEntry ::= { busLecStatTable 1 } BusLecStatEntry ::= SEQUENCE { busLecRecvs Counter32, busLecForwards Counter32, busLecDiscards Counter32 } busLecRecvs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of Multicast, Broadcast and Unknown Forward requests received by the BUS from this LEC." ::= { busLecStatEntry 1 } busLecForwards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of Multicast, Broadcast and Unkown Forward requests forwarded by the BUS from this LEC. The value of this object indicate how many requests have been forwarded by the BUS." ::= { busLecStatEntry 2 } busLecDiscards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of Multicast, Broadcast and Unkown Forward requests discarded by the BUS from this LEC. The value of this object indicate how many requests have been discarded by the BUS." ::= { busLecStatEntry 3 } busErrCtlTable OBJECT-TYPE SYNTAX SEQUENCE OF BusErrCtlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains error log control information of all BUS instances. This table is an extention to the busConfTable. It is used to enable or disable error logs for a particular BUS entry." ::= { busFaultGroup 1 } busErrCtlEntry OBJECT-TYPE SYNTAX BusErrCtlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents a BUS entry in the busConfTable." INDEX { busConfIndex } -- Augments busConfEntry ::= { busErrCtlTable 1 } BusErrCtlEntry ::= SEQUENCE { busErrCtlAdminStatus INTEGER, busErrCtlOperStatus INTEGER, busErrCtlClearLog INTEGER, busErrCtlMaxEntries INTEGER, busErrCtlLastEntry BusErrLogIndexType } busErrCtlAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to enable/disable error logging for the BUS." ::= { busErrCtlEntry 1 } busErrCtlOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), active(2), outOfRes(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object is used to indicate the result of a set operation to the object busErrCtlAdminStatus. If the error log was successfully started, it is in active(2) mode. Otherwise, it is set to either outOfRes(3) or failed(4) for the respective reasons." ::= { busErrCtlEntry 2 } busErrCtlClearLog OBJECT-TYPE SYNTAX INTEGER { noOp(1), clear(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to clear the error log entries associated with this BUS." ::= { busErrCtlEntry 3 } busErrCtlMaxEntries OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum entries of the error log a BUS can support." ::= { busErrCtlEntry 4 } busErrCtlLastEntry OBJECT-TYPE SYNTAX BusErrLogIndexType -- Rsyntax Integer32(1..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The index to the last entry in the error log table for this BUS." ::= { busErrCtlEntry 5 } busErrLogTable OBJECT-TYPE SYNTAX SEQUENCE OF BusErrLogEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains error logs of the BUS instances enabled in the busErrCtlTable. This table is indexed by the BUS instance index and an arbitrary integer uniquely identifies an error log." ::= { busFaultGroup 2 } busErrLogEntry OBJECT-TYPE SYNTAX BusErrLogEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents aan error detected by the BUS." INDEX { busConfIndex, busErrLogIndex } ::= { busErrLogTable 1 } BusErrLogEntry ::= SEQUENCE { busErrLogIndex BusErrLogIndexType, busErrLogAtmAddr AtmLaneAddress, busErrLogErrCode INTEGER, busErrLogTime TimeStamp } busErrLogIndex OBJECT-TYPE SYNTAX BusErrLogIndexType -- Rsyntax Integer32(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer which uniquely identifies an error log entry. The first entry after reset or clearing the error log is an assigned value (2^32-1). Succeding entries are assigned with descending values consecutively. Entries after 1 are discarded.The enabling/disabling of the error log capability is done in the busErrCtlTable." ::= { busErrLogEntry 1 } busErrLogAtmAddr OBJECT-TYPE SYNTAX AtmLaneAddress -- Rsyntax OCTET STRING(SIZE(0 | 20)) ACCESS read-only STATUS mandatory DESCRIPTION "The primary ATM address of the LE Client on whose Multicast Send VCC the error occured. The corresponding error code is specified in the object busErrLogErrCode." ::= { busErrLogEntry 2 } busErrLogErrCode OBJECT-TYPE SYNTAX INTEGER { outOfRes(1), badCtlFrame(2), badDataFrame(3), other(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The Error code which indicates the cause of the error." ::= { busErrLogEntry 3 } busErrLogTime OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The sysUpTime when this entry was logged by the BUS." ::= { busErrLogEntry 4 } busCConfGroup OBJECT IDENTIFIER ::= { busMIBGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects for the -- managing of BUS operation. -- objects -- busConfNextId, busConfAtmAddrSpec, busConfAtmAddrMask, -- busConfAtmAddrActual, busConfElanName, busConfLastChange, -- busConfMaxFrameAge, busConfOperStatus, busConfAdminStatus, -- busConfRowStatus, busVccAtmIfIndex, busVccMtFwdVpi, -- busVccMtFwdVci, busVccRowStatus, busLecTableLastChange, -- busLecMcastSendAtmIfIndex, busLecMcastSendVpi, -- busLecMcastSendVci, busLecRowStatus busCStatGroup OBJECT IDENTIFIER ::= { busMIBGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing information -- about BUS statistics. -- objects -- busStatInOctets, busStatInDiscards, busStatInUcastFrms, -- busStatInMcastFrms, busStatFrmTimeOuts, -- busStatMcastSendRefused, busStatMcastFwdFailure busCFaultGroup OBJECT IDENTIFIER ::= { busMIBGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing information -- about BUS statistics. -- objects -- busErrLogAtmAddr, busErrLogIndex, busErrLogErrCode, -- busErrLogTime, busErrCtlAdminStatus, busErrCtlOperStatus, -- busErrCtlClearLog, busErrCtlMaxEntries, busErrCtlLastEntry busLecCGroup OBJECT IDENTIFIER ::= { busMIBGroups 4 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- A collection of objects providing information -- about LEC-BUS statistics. -- objects -- busLecRecvs, busLecForwards, busLecDiscards busMIBCompliance OBJECT IDENTIFIER ::= { busMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for SNMP entities that support -- the ATM LAN Emulation BUS MIB. -- Module -- >>current<< -- MandGroup -- busCConfGroup -- MandGroup -- busCStatGroup -- MandGroup -- busCFaultGroup -- ObjVar -- busConfAtmAddrSpec -- ObjVar -- busConfAtmAddrMask -- ObjVar -- busConfElanName -- ObjVar -- busConfAdminStatus -- ObjVar -- busConfRowStatus -- ObjVar -- busVccAtmIfIndex -- ObjVar -- busVccMtFwdVpi -- ObjVar -- busVccMtFwdVci -- ObjVar -- busVccRowStatus -- ObjVar -- busLecMcastSendAtmIfIndex -- ObjVar -- busLecMcastSendVpi -- ObjVar -- busLecMcastSendVci -- ObjVar -- busLecRowStatus -- OptGroup -- busLecCGroup END