RC-IP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, IpAddress FROM SNMPv2-SMI DisplayString, TruthValue, MacAddress, RowStatus FROM SNMPv2-TC InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB rcIp, EnableValue, IdList FROM RAPID-CITY; rcIpMib MODULE-IDENTITY LAST-UPDATED "200607140000Z" ORGANIZATION "Bay Networks, Rapid-City Group" CONTACT-INFO "Yu-Ten Lee Postal: Nortel Networks, Inc. 4655 Great America Parkway Santa Clara, CA 95052-8185 Tel: 408-495-2560 Fax: 408-495-6680 E-mail: ylee@baynetworks.com" DESCRIPTION "Enterprise MIB for the Accelar product family." REVISION "200607140000Z" -- 14 July 2006 DESCRIPTION "Version 13: Added rcIpAdEntSecondaryIf" REVISION "200606150000Z" -- 15 June 2006 DESCRIPTION "Version 12: Increased the range for rcIpConfDhcpIfIndex" REVISION "200602090000Z" -- 09 February 2006 DESCRIPTION "Version 11: Added rcIpConfIsisEnable" REVISION "200511220000Z" -- 22 Nov 2005 DESCRIPTION "Version 10: Added rcIpConfReversePathCheckEnable & rcIpConfReversePathCheckMode" REVISION "200509260000Z" -- 26 Sep 2005 DESCRIPTION "Version 9: Updated rcIpConfGlobalEcmpMaxPath to 8" REVISION "200505180000Z" -- 18 May 2005 DESCRIPTION "Version 8: Removed rcIpConfOspfIfMtuIgnore from rcIpConfTable and changes in rcIpConfOspfIfType" REVISION "200502160000Z" -- 16 Feb 2005 DESCRIPTION "Version 7: Changed range for rcIpAdEntVlanId" REVISION "200502040000Z" -- 04 Feb 2005 DESCRIPTION "Version 6 : Added rcIpConfOspfIfMtuIgnore in rcIpConfTable" REVISION "200407210000Z" -- 21 July 2004 DESCRIPTION "Version 5 : Fixed typo" REVISION "200407190000Z" -- 19 July 2004 DESCRIPTION "Version 4 : Added rcIpConfGlobalUdpCheckSumEnable" ::= { rcIp 0 } -- IP Group rcIpConf OBJECT IDENTIFIER ::= { rcIp 1 } -- IP Configuration Table rcIpConfTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table used to maintain IP routing information for a particular interface." ::= { rcIpConf 1 } rcIpConfEntry OBJECT-TYPE SYNTAX RcIpConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing IP routing information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configured on an interface." INDEX { rcIpConfIfIndex } ::= { rcIpConfTable 1 } RcIpConfEntry ::= SEQUENCE { rcIpConfIfIndex InterfaceIndexOrZero, rcIpConfAdvertDefRte TruthValue, rcIpConfAcceptDefRte TruthValue, rcIpConfRowStatus RowStatus, rcIpConfRipEnable TruthValue, rcIpConfOspfEnable TruthValue, rcIpConfIgmpEnable TruthValue, rcIpConfAddrAssigned TruthValue, rcIpConfDhcpEnable TruthValue, rcIpConfTriggeredUpdateEnable TruthValue, rcIpConfAutoAggrerateEnable TruthValue, rcIpConfGenerateDefaultRoute TruthValue, rcIpConfAdvertiseWhenDown TruthValue, rcIpConfDirectBroadcastEnable TruthValue, rcIpConfRipInPolicy DisplayString, rcIpConfRipOutPolicy DisplayString, rcIpConfOspfIfType INTEGER, rcIpConfRipCost INTEGER, rcIpConfRipHolddown INTEGER, rcIpConfRipTimeout INTEGER, rcIpConfRsmltEnable TruthValue, rcIpConfReversePathCheckEnable TruthValue, rcIpConfReversePathCheckMode INTEGER, rcIpConfIsisEnable TruthValue } rcIpConfIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "An unique value to identify a physical interface or a logical interface (VLAN)." ::= { rcIpConfEntry 1 } rcIpConfAdvertDefRte OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate whether this interface should advertize a RIP default route." ::= { rcIpConfEntry 2 } rcIpConfAcceptDefRte OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate whether this interface should accept a RIP default route." ::= { rcIpConfEntry 3 } rcIpConfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row status for this entry." ::= { rcIpConfEntry 4 } rcIpConfRipEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable RIP routing on the specified interface." ::= { rcIpConfEntry 5 } rcIpConfOspfEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable OSPF routing on the specified interface." ::= { rcIpConfEntry 6 } rcIpConfIgmpEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable IGMP on the specified interface." ::= { rcIpConfEntry 7 } rcIpConfAddrAssigned OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate whether IpAddress has been assigned for this interface." ::= { rcIpConfEntry 8 } rcIpConfDhcpEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable DHCP on the specified interface." ::= { rcIpConfEntry 9 } rcIpConfTriggeredUpdateEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate whether the RIP triggered update feature should be enabled on this interface." ::= { rcIpConfEntry 10 } rcIpConfAutoAggrerateEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate whether the auto aggregation feature should be enabled on this interface." ::= { rcIpConfEntry 11 } rcIpConfGenerateDefaultRoute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate whether to generate a default RIP route on this interface." ::= { rcIpConfEntry 12 } rcIpConfAdvertiseWhenDown OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value is used indicated whether vlan state change should be notified to layer 3 or not, provided the vlan is configured as routable interface. Also used for single routable ports, in that case the criteria for state is PortOperStatus. Vlan is considered as UP if atleast one member of the port based vlan has link up, or atleast one port member of the policy based has an entry in the MGID or atleast one static member of the policy based vlan has link up. Otherwise, vlan is considered as DOWN. If the value is 'true' then the interface state change will not be notified to layer 3. (i.e., it always stays up). If the value is 'false' then the vlan state change will be notified to layer 3 so that IP related status reflects routable interface state." DEFVAL { false } ::= { rcIpConfEntry 13 } rcIpConfDirectBroadcastEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate whether this interface should forward direct broadcast traffic" DEFVAL { true } ::= { rcIpConfEntry 14 } rcIpConfRipInPolicy OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate whether this interface should advertize a RIP default route." ::= { rcIpConfEntry 15 } rcIpConfRipOutPolicy OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate whether this interface should accept a RIP default route." ::= { rcIpConfEntry 16 } rcIpConfOspfIfType OBJECT-TYPE SYNTAX INTEGER { broadcast (1), nbma (2), pointToPoint (3), pointToMultipoint (5), passive (99) } MAX-ACCESS read-write STATUS current DESCRIPTION "OSPF Interface Type." ::= { rcIpConfEntry 17 } rcIpConfRipCost OBJECT-TYPE SYNTAX INTEGER (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate the rip cost for this interface." DEFVAL { 1 } ::= { rcIpConfEntry 18 } rcIpConfRipHolddown OBJECT-TYPE SYNTAX INTEGER (0..360) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate the rip holddown timer for this interface" ::= { rcIpConfEntry 19 } rcIpConfRipTimeout OBJECT-TYPE SYNTAX INTEGER (15..259200) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate the rip timeout interval for this interface" ::= { rcIpConfEntry 20 } rcIpConfRsmltEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to enable Route Smlt feature." DEFVAL { false } ::= { rcIpConfEntry 21 } rcIpConfReversePathCheckEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate whether this interface should perform Reverse Path Check" DEFVAL { false } ::= { rcIpConfEntry 22 } rcIpConfReversePathCheckMode OBJECT-TYPE SYNTAX INTEGER { exist-only (1), strict (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reverse Path Checking mode." DEFVAL { exist-only } ::= { rcIpConfEntry 23 } rcIpConfIsisEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable Isis on this IP interface " ::= { rcIpConfEntry 24 } -- rcIpConfOspfTable ::= { rcIpConf 2 } defined in rcOspf.mib rcIpConfGlobal OBJECT IDENTIFIER ::= { rcIpConf 6 } rcIpConfGlobalRipHoldDownTime OBJECT-TYPE SYNTAX INTEGER (0..360) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to set the system-wide RIP hold down time in seconds." DEFVAL { 120 } ::= { rcIpConfGlobal 1 } rcIpConfGlobalIcmpNetUnreach OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to set the icmp net unreach feature enable/disable." DEFVAL { false } ::= { rcIpConfGlobal 2 } rcIpConfGlobalEcmpEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to set the ecmp enable/disable." DEFVAL { false } ::= { rcIpConfGlobal 3 } rcIpConfGlobalEcmpMaxPath OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to globally configure maximum ECMP paths number." DEFVAL { 1 } ::= { rcIpConfGlobal 4 } rcIpConfGlobalAlternativeEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to globally configure alternative enable." DEFVAL { true } ::= { rcIpConfGlobal 5 } rcIpConfGlobalRouteDiscoveryEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable ICMP Route Discovery feature" DEFVAL { true } ::= { rcIpConfGlobal 6 } rcIpConfGlobalRipTimeOutInterval OBJECT-TYPE SYNTAX INTEGER (15..259200) MAX-ACCESS read-write STATUS current DESCRIPTION "Rip TimeOut Interval in seconds" DEFVAL { 180 } ::= { rcIpConfGlobal 8 } rcIpConfGlobalRipDefImportMetric OBJECT-TYPE SYNTAX INTEGER (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Rip def import metric" DEFVAL { 8 } ::= { rcIpConfGlobal 9 } rcIpConfGlobalEcmp1PathList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Routes to networks specified in this prefix-list can have upto 1 ECMP path, irrespective of ecmp-max-path configuration" ::= { rcIpConfGlobal 10 } rcIpConfGlobalEcmp2PathList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Routes to networks specified in this prefix-list can have upto 2 ECMP path, irrespective of ecmp-max-path configuration." ::= { rcIpConfGlobal 11 } rcIpConfGlobalEcmp3PathList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Routes to networks specified in this prefix-list can have upto 3 ECMP path, irrespective of ecmp-max-path configuration." ::= { rcIpConfGlobal 12 } rcIpConfGlobalEcmp4PathList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Routes to networks specified in this prefix-list can have upto 4 ECMP path, irrespective of ecmp-max-path configuration." ::= { rcIpConfGlobal 13 } rcIpConfGlobalEcmpPathListApply OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This is to apply any changes in ECMP path list configuration or in the prefix-lists configured to be used as path list" ::= { rcIpConfGlobal 14 } rcIpConfGlobalIcmpRedirectMsg OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { rcIpConfGlobal 15 } rcIpConfGlobalMulticastMacFloodingStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { rcIpConfGlobal 16 } rcIpConfGlobalArpThreshold OBJECT-TYPE SYNTAX INTEGER (50..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the maximum number of outstanding arp request a switch can generate." DEFVAL { 500 } ::= { rcIpConfGlobal 17 } rcIpConfGlobalAllowMoreSpecificNonLocalRouteEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to determine whether more specific non local routes will go into the routing table." DEFVAL { false } ::= { rcIpConfGlobal 18 } rcIpConfGlobalUdpCheckSumEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable UDP checksum calculation." DEFVAL { true } ::= { rcIpConfGlobal 19 } -- IP Configuration IP Interface Table rcIpConfV2Table OBJECT-TYPE SYNTAX SEQUENCE OF RcIpConfV2Entry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A table used to maintain IP routing information for a particular interface." ::= { rcIpConf 8 } rcIpConfV2Entry OBJECT-TYPE SYNTAX RcIpConfV2Entry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Entry containing IP routing information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configured on an interface." INDEX { rcIpConfV2Index, rcIpConfV2Addr } ::= { rcIpConfV2Table 1 } RcIpConfV2Entry ::= SEQUENCE { rcIpConfV2Index InterfaceIndexOrZero, rcIpConfV2Addr IpAddress, rcIpConfV2RowStatus RowStatus, rcIpConfV2AdvertDefRte TruthValue, rcIpConfV2AcceptDefRte TruthValue, rcIpConfV2RipEnable TruthValue, rcIpConfV2OspfEnable TruthValue, rcIpConfV2IgmpEnable TruthValue, rcIpConfV2AddrAssigned TruthValue, rcIpConfV2TriggeredUpdateEnable TruthValue, rcIpConfV2RipAutoAggrerateEnable TruthValue, rcIpConfV2RipGenerateDefaultRoute TruthValue, rcIpConfV2AdvertiseWhenDown TruthValue } rcIpConfV2Index OBJECT-TYPE SYNTAX InterfaceIndexOrZero (0..4094) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "An unique value to identify a physical interface or a logical interface (VLAN)." ::= { rcIpConfV2Entry 1 } rcIpConfV2Addr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Ip interface address." ::= { rcIpConfV2Entry 2 } rcIpConfV2RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Row status for this entry." ::= { rcIpConfV2Entry 3 } rcIpConfV2AdvertDefRte OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Used to indicate whether this interface should advertize a RIP default route." ::= { rcIpConfV2Entry 4 } rcIpConfV2AcceptDefRte OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Used to indicate whether this interface should accept a RIP default route." ::= { rcIpConfV2Entry 5 } rcIpConfV2RipEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Enable or disable RIP routing on the specified interface." ::= { rcIpConfV2Entry 6 } rcIpConfV2OspfEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Enable or disable OSPF routing on the specified interface." ::= { rcIpConfV2Entry 7 } rcIpConfV2IgmpEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Enable or disable IGMP on the specified interface." ::= { rcIpConfV2Entry 8 } rcIpConfV2AddrAssigned OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicate whether IpAddress has been assigned for this interface." ::= { rcIpConfV2Entry 9 } rcIpConfV2TriggeredUpdateEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Used to indicate whether the RIP triggered update feature should be enabled on this interface." ::= { rcIpConfV2Entry 10 } rcIpConfV2RipAutoAggrerateEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Used to indicate whether the auto aggregation feature should be enabled on this interface." ::= { rcIpConfV2Entry 11 } rcIpConfV2RipGenerateDefaultRoute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Used to indicate whether to generate a default RIP route on this interface." ::= { rcIpConfV2Entry 12 } rcIpConfV2AdvertiseWhenDown OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The value is used indicated whether vlan state change should be notified to layer 3 or not, provided the vlan is configured as routable interface. Also used for single routable ports, in that case the criteria for state is PortOperStatus. Vlan is considered as UP if atleast one member of the port based vlan has link up, or atleast one port member of the policy based has an entry in the MGID or atleast one static member of the policy based vlan has link up. Otherwise, vlan is considered as DOWN. If the value is 'true' then the interface state change will not be notified to layer 3. (i.e., it always stays up). If the value is 'false' then the vlan state change will be notified to layer 3 so that IP related status reflects routable interface state." DEFVAL { false } ::= { rcIpConfV2Entry 13 } -- IP Route Smlt Table rcIpConfRsmltTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpConfRsmltEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table used to maintain OSPF summary route metric parameter for a particular Area range. " ::= { rcIpConf 11 } rcIpConfRsmltEntry OBJECT-TYPE SYNTAX RcIpConfRsmltEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing OSPF summary route metric parameter for a particular Area range. An entry is automatically created in this table when an area range is configured through ospfAreaAggregateTable in rfc1850rcc.mib" INDEX { rcIpConfRsmltIfIndex } ::= { rcIpConfRsmltTable 1 } RcIpConfRsmltEntry ::= SEQUENCE { rcIpConfRsmltIfIndex InterfaceIndex, rcIpConfRsmltHoldDownTimer INTEGER, rcIpConfRsmltHoldUpTimer INTEGER, rcIpConfRsmltRowStatus RowStatus } rcIpConfRsmltIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface Index, this is an index of the table." ::= { rcIpConfRsmltEntry 1 } rcIpConfRsmltHoldDownTimer OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "Timer value, the range of value is from 0 to 3600." ::= { rcIpConfRsmltEntry 2 } rcIpConfRsmltHoldUpTimer OBJECT-TYPE SYNTAX INTEGER (0..3600 | 9999) MAX-ACCESS read-write STATUS current DESCRIPTION "The range of value 0 to 3600 or 9999. 9999 means infinity." ::= { rcIpConfRsmltEntry 3 } rcIpConfRsmltRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status." ::= { rcIpConfRsmltEntry 4 } rcIpRsmlt OBJECT IDENTIFIER ::= { rcIp 26 } rcIpRsmltGlobal OBJECT IDENTIFIER ::= { rcIpRsmlt 1 } rcIpRsmltGlobalTableSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Route Smlt table size." ::= { rcIpRsmltGlobal 1 } rcIpRsmltOperTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpRsmltOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route Smlt Table" ::= { rcIpRsmlt 2 } rcIpRsmltOperEntry OBJECT-TYPE SYNTAX RcIpRsmltOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of Ip As Path Access List Table." INDEX { rcIpRsmltOperIfIndex } ::= { rcIpRsmltOperTable 1 } RcIpRsmltOperEntry ::= SEQUENCE { rcIpRsmltOperIfIndex InterfaceIndex, rcIpRsmltOperAdminStatus TruthValue, rcIpRsmltOperHoldDownTimer INTEGER, rcIpRsmltOperHoldDownTimeRemaining INTEGER, rcIpRsmltOperHoldUpTimer INTEGER, rcIpRsmltOperHoldUpTimeRemaining INTEGER, rcIpRsmltOperIpAddr IpAddress, rcIpRsmltOperOperStatus INTEGER, rcIpRsmltOperSmltId IdList, rcIpRsmltOperSltId IdList, rcIpRsmltOperVlanId INTEGER, rcIpRsmltOperMacAddr MacAddress, rcIpRsmltOperRowStatus RowStatus } rcIpRsmltOperIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Route Smlt Oper IfIndex." ::= { rcIpRsmltOperEntry 1 } rcIpRsmltOperAdminStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "is a enable/disable flag." DEFVAL { false } ::= { rcIpRsmltOperEntry 2 } rcIpRsmltOperHoldDownTimer OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "Timer value, the range of value is from 0 to 3600." DEFVAL { 0 } ::= { rcIpRsmltOperEntry 3 } rcIpRsmltOperHoldDownTimeRemaining OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "The time value that indicate how much time remaining of HoldDownTimer." DEFVAL { 0 } ::= { rcIpRsmltOperEntry 4 } rcIpRsmltOperHoldUpTimer OBJECT-TYPE SYNTAX INTEGER (0..3600 | 9999) MAX-ACCESS read-write STATUS current DESCRIPTION "The range of value 0 to 3600 or 9999. 9999 means infinity." DEFVAL { 0 } ::= { rcIpRsmltOperEntry 5 } rcIpRsmltOperHoldUpTimeRemaining OBJECT-TYPE SYNTAX INTEGER (0..3600 | 9999) MAX-ACCESS read-only STATUS current DESCRIPTION "The time value that indicate how much time remaining of HoldUpTimer." DEFVAL { 0 } ::= { rcIpRsmltOperEntry 6 } rcIpRsmltOperIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP Interface with RSMLT on." DEFVAL { '00000000'H } -- 0.0.0.0 ::= { rcIpRsmltOperEntry 7 } rcIpRsmltOperOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operation status of Rsmlt, up or down." DEFVAL { down } ::= { rcIpRsmltOperEntry 8 } rcIpRsmltOperSmltId OBJECT-TYPE SYNTAX IdList MAX-ACCESS read-only STATUS current DESCRIPTION "The id range for SMLT is 1-32." ::= { rcIpRsmltOperEntry 9 } rcIpRsmltOperSltId OBJECT-TYPE SYNTAX IdList MAX-ACCESS read-only STATUS current DESCRIPTION "The id range for SLT is 1-512." ::= { rcIpRsmltOperEntry 10 } rcIpRsmltOperVlanId OBJECT-TYPE SYNTAX INTEGER (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "Vlan id." ::= { rcIpRsmltOperEntry 11 } rcIpRsmltOperMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Mac Address." ::= { rcIpRsmltOperEntry 12 } rcIpRsmltOperRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status." ::= { rcIpRsmltOperEntry 13 } -- Route Smlt Peer Table rcIpRsmltPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpRsmltPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route Smlt Table" ::= { rcIpRsmlt 3 } rcIpRsmltPeerEntry OBJECT-TYPE SYNTAX RcIpRsmltPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of Ip As Path Access List Table." INDEX { rcIpRsmltPeerIfIndex } ::= { rcIpRsmltPeerTable 1 } RcIpRsmltPeerEntry ::= SEQUENCE { rcIpRsmltPeerIfIndex InterfaceIndex, rcIpRsmltPeerAdminStatus TruthValue, rcIpRsmltPeerHoldDownTimer INTEGER, rcIpRsmltPeerHoldDownTimeRemaining INTEGER, rcIpRsmltPeerHoldUpTimer INTEGER, rcIpRsmltPeerHoldUpTimeRemaining INTEGER, rcIpRsmltPeerIpAddr IpAddress, rcIpRsmltPeerOperStatus INTEGER, rcIpRsmltPeerSmltId IdList, rcIpRsmltPeerSltId IdList, rcIpRsmltPeerVlanId INTEGER, rcIpRsmltPeerMacAddr MacAddress } rcIpRsmltPeerIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Route Smlt Oper IfIndex." ::= { rcIpRsmltPeerEntry 1 } rcIpRsmltPeerAdminStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "is a enable/disable flag." ::= { rcIpRsmltPeerEntry 2 } rcIpRsmltPeerHoldDownTimer OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "Timer value, the range of value is from 0 to 3600." DEFVAL { 0 } ::= { rcIpRsmltPeerEntry 3 } rcIpRsmltPeerHoldDownTimeRemaining OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "The time value that indicate how much time remaining of HoldDownTimer." DEFVAL { 0 } ::= { rcIpRsmltPeerEntry 4 } rcIpRsmltPeerHoldUpTimer OBJECT-TYPE SYNTAX INTEGER (0..3600 | 9999) MAX-ACCESS read-only STATUS current DESCRIPTION "The range of value 0 to 3600 or 9999. 9999 means infinity." DEFVAL { 0 } ::= { rcIpRsmltPeerEntry 5 } rcIpRsmltPeerHoldUpTimeRemaining OBJECT-TYPE SYNTAX INTEGER (0..3600 | 9999) MAX-ACCESS read-only STATUS current DESCRIPTION "The time value that indicate how much time remaining of HoldUpTimer." DEFVAL { 0 } ::= { rcIpRsmltPeerEntry 6 } rcIpRsmltPeerIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP Interface with RSMLT on." DEFVAL { '00000000'H } -- 0.0.0.0 ::= { rcIpRsmltPeerEntry 7 } rcIpRsmltPeerOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operation status of Rsmlt, up or down." DEFVAL { down } ::= { rcIpRsmltPeerEntry 8 } rcIpRsmltPeerSmltId OBJECT-TYPE SYNTAX IdList MAX-ACCESS read-only STATUS current DESCRIPTION "The id range for SMLT is 1-32." ::= { rcIpRsmltPeerEntry 9 } rcIpRsmltPeerSltId OBJECT-TYPE SYNTAX IdList MAX-ACCESS read-only STATUS current DESCRIPTION "The id range for SLT is 1-512." ::= { rcIpRsmltPeerEntry 10 } rcIpRsmltPeerVlanId OBJECT-TYPE SYNTAX INTEGER (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "Vlan id." ::= { rcIpRsmltPeerEntry 11 } rcIpRsmltPeerMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Mac Address." ::= { rcIpRsmltPeerEntry 12 } -- IP Address Table rcIpAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of addressing information relevant to this entity's IP addresses. This table is identical to the ipAddrTable in MIB2 except the columns rcIpAdEntIfIndex and rcIpAdEntAddr are reversed. Also, the table is indexed by both these variables." ::= { rcIp 2 } rcIpAddrEntry OBJECT-TYPE SYNTAX RcIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The addressing information for one of this entity's IP addresses." INDEX { rcIpAdEntIfIndex, rcIpAdEntAddr } ::= { rcIpAddrTable 1 } RcIpAddrEntry ::= SEQUENCE { rcIpAdEntIfIndex InterfaceIndex, rcIpAdEntAddr IpAddress, rcIpAdEntNetMask IpAddress, rcIpAdEntBcastAddrFormat INTEGER, rcIpAdEntReasmMaxSize INTEGER, rcIpAdEntRowStatus RowStatus, rcIpAdEntVlanId INTEGER, rcIpAdEntBrouterPort TruthValue, rcIpAdEntMacOffset INTEGER, rcIpAdEntIfType INTEGER, rcIpAdEntSecondaryIf TruthValue } rcIpAdEntIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { rcIpAddrEntry 1 } rcIpAdEntAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address to which this entry's addressing information pertains." ::= { rcIpAddrEntry 2 } rcIpAdEntNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0." ::= { rcIpAddrEntry 3 } rcIpAdEntBcastAddrFormat OBJECT-TYPE SYNTAX INTEGER { zeros(0), -- use zeros ones(1) -- use ones } MAX-ACCESS read-only STATUS current DESCRIPTION "The IP broadcast address format used on this interface." ::= { rcIpAddrEntry 4 } rcIpAdEntReasmMaxSize OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface." ::= { rcIpAddrEntry 5 } rcIpAdEntRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Used to create/delete entries" ::= { rcIpAddrEntry 6 } rcIpAdEntVlanId OBJECT-TYPE SYNTAX INTEGER (0..4096) MAX-ACCESS read-write STATUS current DESCRIPTION "A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag." ::= { rcIpAddrEntry 7 } rcIpAdEntBrouterPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Used to indicate whether this entry correponds to a brouter port (as oppose to a routable VLAN). This value cannot be changed after the row is created." ::= { rcIpAddrEntry 8 } rcIpAdEntMacOffset OBJECT-TYPE SYNTAX INTEGER (0..511) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to translate the ip address into mac address. The system has 512 mac addresses of which 0-507 are reserved for Boardwalk box. 508-511 is reserved for MG. One can either mention a mac offset while configuring an ip on the vlan or it can be alloted by the system within the above range." ::= { rcIpAddrEntry 9 } rcIpAdEntIfType OBJECT-TYPE SYNTAX INTEGER { circuitLessIP(1), brouterPort(2), vlan(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The address entry IfType indicates the type of the interface. In the case of circuit-less-IP there is no association with any ports. In other words, it can be thought of as a virtual interface. The value 'brouter port' indicates this interface is associated with a specific physical port. The value 'vlan' indicates a logical port that contains one or physical ports/MLT ports." ::= { rcIpAddrEntry 10 } rcIpAdEntSecondaryIf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate whether this entry correponds to a secondary interface (as oppose to a primary interface). This value cannot be changed after the row is created." ::= { rcIpAddrEntry 11 } -- FlowContorl Group rcIpFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IpFlow Table. This table contain entries that correspond to RSVP records in the switching fabric Address Resolution table. A connection that has a matching entry in this table will be processed with a higher priority than connections that do not have an entry." ::= { rcIp 3 } rcIpFlowEntry OBJECT-TYPE SYNTAX RcIpFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Proprietary flow control variables." INDEX { rcIpFlowSrcIpAddress, rcIpFlowSrcIpPort, rcIpFlowDstIpAddress, rcIpFlowDstIpPort, rcIpFlowProtocol } ::= { rcIpFlowTable 1 } RcIpFlowEntry ::= SEQUENCE { rcIpFlowSrcIpAddress IpAddress, rcIpFlowSrcIpPort INTEGER, rcIpFlowDstIpAddress IpAddress, rcIpFlowDstIpPort INTEGER, rcIpFlowProtocol INTEGER, rcIpFlowRowStatus RowStatus } rcIpFlowSrcIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The source IP address of an IP packet." ::= { rcIpFlowEntry 1 } rcIpFlowSrcIpPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The source port of an IP packet. A zero value in this field is used as a wildcard value." DEFVAL { 0 } ::= { rcIpFlowEntry 2 } rcIpFlowDstIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of an IP packet." ::= { rcIpFlowEntry 3 } rcIpFlowDstIpPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The destination port of an IP packet. A zero value in this field is used as a wildcard value." DEFVAL { 0 } ::= { rcIpFlowEntry 4 } rcIpFlowProtocol OBJECT-TYPE SYNTAX INTEGER { ip(4), -- ip tcp(6), -- tcp udp(17) -- udp } MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol type of an IP packet. A zero value in this field is used as a wildcard value." DEFVAL { ip } ::= { rcIpFlowEntry 5 } rcIpFlowRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Status of entry." ::= { rcIpFlowEntry 6 } rcIpRouting OBJECT IDENTIFIER ::= { rcIp 4 } -- defined in rcRouteXXX.mib -- rcIpConfIgmpTable ::= { rcIp 5 } defined in rcIgmpXXX.mib -- rcIgmpGroupTable ::= { rcIp 6 } defined in rcIgmpXXX.mib -- rcIpRouteTable ::= { rcIp 7 } defined in rcRouteXXX.mib -- Ip Config Dhcp Table rcIpConfDhcpTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpConfDhcpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DHCP configuration table" ::= { rcIp 8 } rcIpConfDhcpEntry OBJECT-TYPE SYNTAX RcIpConfDhcpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used to configure DHCP on a particular port. An entry is created automatically when the variable rcIpConfDhcpEnable is set to TRUE. Once created this entry will only be deleted if the rcIpConfDhcpRowStatus is set to 'destroy(6)'. In which case, the rcIpConfDhcpEnable is automatically reset to the FALSE setting." INDEX { rcIpConfDhcpIfIndex } ::= { rcIpConfDhcpTable 1 } RcIpConfDhcpEntry ::= SEQUENCE { rcIpConfDhcpIfIndex InterfaceIndexOrZero, rcIpConfDhcpMaxHop INTEGER, rcIpConfDhcpMinSec INTEGER, rcIpConfDhcpMode INTEGER, rcIpConfDhcpRowStatus RowStatus, rcIpConfDhcpNumRequests Counter32, rcIpConfDhcpNumReplies Counter32, rcIpConfDhcpAlwaysBroadcast TruthValue } rcIpConfDhcpIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero (0..6143) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface number. The number can represent either a physical or logical(VLAN) interface." ::= { rcIpConfDhcpEntry 1 } rcIpConfDhcpMaxHop OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate the maximum number of hops a DHCP packet can take from the source device to the destination device (i.e., DHCP client to DHCP server)." DEFVAL { 4 } ::= { rcIpConfDhcpEntry 2 } rcIpConfDhcpMinSec OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate the minimum number of seconds to wait between receiving a DHCP packet and actually forwarding the DHCP packet to the destination device. A value of zero(0) indicates forwarding should be done immediately without any delay." DEFVAL { 0 } ::= { rcIpConfDhcpEntry 3 } rcIpConfDhcpMode OBJECT-TYPE SYNTAX INTEGER { none(0), bootp(2), dhcp(3), both(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate what type of DHCP packets this interface should support. A value of none(1) will result in all incoming DHCP and BOOTP packets to be dropped." DEFVAL { both } ::= { rcIpConfDhcpEntry 4 } rcIpConfDhcpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "An entry is created automatically when the variable rcIpConfDhcpEnable is set to TRUE. Once created this entry will only be deleted if the rcIpConfDhcpRowStatus is set to 'destroy(6)'. In which case, the rcIpConfDhcpEnable is automatically reset to the FALSE setting." ::= { rcIpConfDhcpEntry 5 } rcIpConfDhcpNumRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of DHCP requests seen on this interface." ::= { rcIpConfDhcpEntry 6 } rcIpConfDhcpNumReplies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of DHCP replies seen on this interface." ::= { rcIpConfDhcpEntry 7 } rcIpConfDhcpAlwaysBroadcast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate if DHCP Reply packets should be broadcast to the DHCP client on this interface." DEFVAL { false } ::= { rcIpConfDhcpEntry 8 } -- Ip Dhcp Forward Table rcIpDhcpForwardTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpDhcpForwardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DHCP forwarding table." ::= { rcIp 9 } rcIpDhcpForwardEntry OBJECT-TYPE SYNTAX RcIpDhcpForwardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry used represents a DHCP forwarding directive." INDEX { rcIpDhcpForwardAgentAddr, rcIpDhcpForwardServerAddr } ::= { rcIpDhcpForwardTable 1 } RcIpDhcpForwardEntry ::= SEQUENCE { rcIpDhcpForwardAgentAddr IpAddress, rcIpDhcpForwardServerAddr IpAddress, rcIpDhcpForwardEnable TruthValue, rcIpDhcpForwardMode INTEGER, rcIpDhcpForwardRowStatus RowStatus } rcIpDhcpForwardAgentAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address configured on an interface (i.e., a locally configured IP address)." ::= { rcIpDhcpForwardEntry 1 } rcIpDhcpForwardServerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the DHCP server. If this IP address corresponds to a locally configured IP network, the DHCP packet is broadcasted out the interface the IP address is assigned to. This behavior is known as 'relay agent' mode. If this IP address is a remote address, the DHCP packet is sent via unicast to the remote device. This behavior is known as 'preferred server' mode." ::= { rcIpDhcpForwardEntry 2 } rcIpDhcpForwardEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate whether is entry should be used." DEFVAL { true } ::= { rcIpDhcpForwardEntry 3 } rcIpDhcpForwardMode OBJECT-TYPE SYNTAX INTEGER { none(0), bootp(2), dhcp(3), both(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate whether this entry pertains to BOOTP packets, DHCP packets, or both." DEFVAL { both } ::= { rcIpDhcpForwardEntry 4 } rcIpDhcpForwardRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row status of this entry." ::= { rcIpDhcpForwardEntry 5 } rcIpFilter OBJECT IDENTIFIER ::= { rcIp 10 } -- defined in rcFilterXXX.mib rcIpPolicy OBJECT IDENTIFIER ::= { rcIp 11 } -- defined in rcPolicyXXX.mib rcIpDvmrp OBJECT IDENTIFIER ::= { rcIp 12 } -- defined in rcDvmrpXXX.mib rcIpUdp OBJECT IDENTIFIER ::= { rcIp 13 } -- defined in rcUdpXXX.mib --IP ToS Rule rcIpTosRule OBJECT IDENTIFIER ::= { rcIp 14 } --excluded rcIpTosRuleAndMask OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "And Mask. The Ip ToS byte in the Ip header is logically ANDed with this value, and then logically ORed with the one of the OrRules below." ::= { rcIpTosRule 1 } rcIpTosRuleOrRule1 OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Quid/Gid Or rule #1. The Ip ToS byte in the Ip header is logically ORed with this value." ::= { rcIpTosRule 2 } rcIpTosRuleOrRule2 OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Quid/Gid Or rule #2. The Ip ToS byte in the Ip header is logically ORed with this value." ::= { rcIpTosRule 3 } rcIpTosRuleOrRule3 OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Quid/Gid Or rule #3. The Ip ToS byte in the Ip header is logically ORed with this value." ::= { rcIpTosRule 4 } rcIpTosRuleTosPriorityEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Enable Tos priority." ::= { rcIpTosRule 5 } rcIpTosRuleTosThreshold OBJECT-TYPE SYNTAX INTEGER { level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "tos threshold" ::= { rcIpTosRule 6 } rcIpStaticRoute OBJECT IDENTIFIER ::= { rcIp 15 } -- defined in rcRouteXXX.mib rcIpPim OBJECT IDENTIFIER ::= { rcIp 16 } -- defined in rcPimXXX.mib -- rcIpMulticastArpTable ::= { rcIp 17 } defined in rcArpXXX.mib -- rcIpMulticastTable ::= { rcIp 18 } defined in rcMcastXXX.mib -- IP COPS Global rcIpCops OBJECT IDENTIFIER ::= { rcIp 19 } rcCopsGlobalEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Cops feature enable/disable" ::= { rcIpCops 1 } -- defined in rcRipXXX.mib rcIpRipInterface OBJECT IDENTIFIER ::= { rcIp 20 } -- defined in rcMcastXXX.mib -- rcIpMulticastTimedPruneTable OBJECT IDENTIFIER ::= { rcIp 21 } -- ICMP Route discovery parameters rcIpConfIcmpRdiscTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpConfIcmpRdiscEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table used to maintain ICMP Route discovery information for a particular interface." ::= { rcIp 22 } rcIpConfIcmpRdiscEntry OBJECT-TYPE SYNTAX RcIpConfIcmpRdiscEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing ICMP Rdisc information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configured on an interface." INDEX { rcIpConfIcmpRdiscIfIndex } ::= { rcIpConfIcmpRdiscTable 1 } RcIpConfIcmpRdiscEntry ::= SEQUENCE { rcIpConfIcmpRdiscIfIndex INTEGER, rcIpConfIcmpRdiscAdvAddress IpAddress, rcIpConfIcmpRdiscAdvFlag TruthValue, rcIpConfIcmpRdiscAdvLifetime INTEGER, rcIpConfIcmpRdiscMaxAdvInterval INTEGER, rcIpConfIcmpRdiscMinAdvInterval INTEGER, rcIpConfIcmpRdiscPreferenceLevel INTEGER } rcIpConfIcmpRdiscIfIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An unique value to identify a physical interface or a logical interface (VLAN)." ::= { rcIpConfIcmpRdiscEntry 1 } rcIpConfIcmpRdiscAdvAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Advertisement address to which the route discovery advertisements transmitted on this interface." ::= { rcIpConfIcmpRdiscEntry 2 } rcIpConfIcmpRdiscAdvFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag to indicate whether or not the address is to be advertised on this interface." ::= { rcIpConfIcmpRdiscEntry 3 } rcIpConfIcmpRdiscAdvLifetime OBJECT-TYPE SYNTAX INTEGER (4..9000) MAX-ACCESS read-write STATUS current DESCRIPTION "The value to be placed in the lifetime field of Router Advertisements sent from the interface." ::= { rcIpConfIcmpRdiscEntry 4 } rcIpConfIcmpRdiscMaxAdvInterval OBJECT-TYPE SYNTAX INTEGER (4..1800) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time allowed between sending Router Advertisements from this interface." ::= { rcIpConfIcmpRdiscEntry 5 } rcIpConfIcmpRdiscMinAdvInterval OBJECT-TYPE SYNTAX INTEGER (3..1800) MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time allowed between sending Router Advertisements from this interface." ::= { rcIpConfIcmpRdiscEntry 6 } rcIpConfIcmpRdiscPreferenceLevel OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Preferability of the router address as a default Router " ::= { rcIpConfIcmpRdiscEntry 7 } -- defined in rcMcastXXX.mib rcIpMulticastSoftwareForwarding OBJECT IDENTIFIER ::= { rcIp 23 } rcIpMrouteHw OBJECT IDENTIFIER ::= { rcIp 24 } -- IP Resource Usage Global rcIpResourceUsage OBJECT IDENTIFIER ::= { rcIp 25 } rcIpResourceUsageGlobal OBJECT IDENTIFIER ::= { rcIpResourceUsage 1 } rcIpResourceUsageGlobalIngressRecInUse OBJECT-TYPE SYNTAX INTEGER (0..32767) MAX-ACCESS read-only STATUS current DESCRIPTION "Used to get the Ingress Record Usage in the switch. (S-G usage)." ::= { rcIpResourceUsageGlobal 1 } rcIpResourceUsageGlobalEgressRecInUse OBJECT-TYPE SYNTAX INTEGER (0..32767) MAX-ACCESS read-only STATUS current DESCRIPTION "Used to get the Egress Record Usage in the switch (pepstream count)." ::= { rcIpResourceUsageGlobal 2 } rcIpResourceUsageGlobalIngressThreshold OBJECT-TYPE SYNTAX INTEGER (0..32767) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to get the threshold count for Ingress records." DEFVAL { 0 } ::= { rcIpResourceUsageGlobal 3 } rcIpResourceUsageGlobalEgressThreshold OBJECT-TYPE SYNTAX INTEGER (0..32767) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to get threshold count for egress records." DEFVAL { 0 } ::= { rcIpResourceUsageGlobal 4 } rcIpResourceUsageGlobalSendTrapAndLog OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "A means of alerting the user. If this bool is set, a message will be send to console and also a duReport will be logged." DEFVAL { disable } ::= { rcIpResourceUsageGlobal 5 } rcIpResourceUsageGlobalSendTrapOnly OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "A means of alerting the user. If this bool is set, a message will be send to console." DEFVAL { disable } ::= { rcIpResourceUsageGlobal 6 } rcIpResourceUsageGlobalLogMsgOnly OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "A means of alerting the user.If this bool is set, a duReport will be logged." DEFVAL { disable } ::= { rcIpResourceUsageGlobal 7 } rcIpGenPolicy OBJECT IDENTIFIER ::= { rcIp 100 } -- defined in rcPolicyXXX.mib rcIpBgp OBJECT IDENTIFIER ::= { rcIp 101 } -- defined in rcBgpXXX.mib rcIpMpls OBJECT IDENTIFIER ::= { rcIp 102 } -- defined in rcMplsXXX.mib END