-- **************************************************************************** -- LEFTHAND-NETWORKS-NSM-CLUSTERING-MIB -- Management Information Base for SNMP Network Management -- -- This MIB provides information about the cluster the node is in. -- The information in this MIB will be the same for all nodes in the cluster. -- Any node running SAN/iQ 8.5 or later can provide this information. -- Nodes running SAN/iQ 8.1 or earlier must be running a manager to use this MIB. -- -- This MIB must be loaded after: -- LEFTHAND-NETWORKS-GLOBAL-REG-MIB.mib -- LEFTHAND-NETWORKS-NSM-MIB.mib -- -- The LeftHand Networks Enterprise number is 9804. -- The ASN.1 prefix to, and including the LeftHand Networks Enterprise is: -- 1.3.6.1.4.1.9804 -- **************************************************************************** -- Copyright 2009,2010 Hewlett-Packard Development Company, L.P. -- Copyright 2008,2009 LeftHand Networks, Inc. -- All Rights Reserved. -- -- Hewlett-Packard Company shall not be liable for technical or -- editorial errors or omissions contained herein. The information in -- this document is provided "as is" without warranty of any kind and -- is subject to change without notice. The warranties for HP products -- are set forth in the express limited warranty statements -- accompanying such products. Nothing herein should be construed as -- constituting an additional warranty. -- -- Confidential computer software. Valid license from HP required for -- possession, use or copying. Consistent with FAR 12.211 and 12.212, -- Commercial Computer Software, Computer Software Documentation, and -- Technical Data for Commercial Items are licensed to the U.S. -- Government under vendor's standard commercial license. -- **************************************************************************** -- **************************************************************************** -- Objects marked as deprecated may no longer exist. They were removed in the -- SAN/iQ version indicated in the description of the object but may still -- be used if the storage module is part of a management group running an -- older version of SAN/IQ. -- **************************************************************************** LEFTHAND-NETWORKS-NSM-CLUSTERING-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Gauge32, Counter64, IpAddress FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue, DateAndTime FROM SNMPv2-TC OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF CounterBasedGauge64 FROM HCNUM-TC lhnModules, lhnNsm FROM LEFTHAND-NETWORKS-GLOBAL-REG-MIB lhnNsmClustering FROM LEFTHAND-NETWORKS-NSM-MIB; -- lhnNsm is imported but never used, this will create a smilint warning -- however, it's necessary for some MIB compilers -- -- Module definition and a brief description of this mib. -- lhnNsmClusteringModule MODULE-IDENTITY LAST-UPDATED "201006230000Z" ORGANIZATION "Hewlett Packard Company, StorageWorks Division" CONTACT-INFO "Product Support Product URL: www.hp.com/go/p4000 Support URL: www.itrc.hp.com Product Phone: www.hp.com/go/contact 1-800-786-7967 (US only) Support Phone: www.hp.com/go/contact 1-800-334-5144 (US only)" DESCRIPTION "HP StorageWorks P4000 Cluster Information" REVISION "201006230000Z" DESCRIPTION "SAN/iQ 7.0, SAN/iQ 8.0, SAN/iQ 8.1, SAN/iQ 8.5" ::= { lhnModules 12 } --****************************************************************************** -- -- Textual Conventions -- --****************************************************************************** ClusPermissionBits ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Bit field for ACL permissions." SYNTAX BITS { read(0), write(1), exclusive(2) } ClusFeatureBits ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Bit field for features." SYNTAX BITS { clustering(0), managedSnapshot(1), remoteSnapshot(2), manualSnapshot(3), multiSiteSan(4) } ClusCreatorTypes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Volume creators. unknown: The creator is unknown. gui: A person using the HP P4000 Centralized Management Console script: An old scripting interface. (deprecated) text: An old internal interface. (deprecated) api: A Windows Application such as VSS. gateway: An internal iSCSI gateway for internal volumes/snapshots." SYNTAX INTEGER { unknown(0), manager(1), gui(2), script(3), text(4), api(5), gateway(6) } ClusReplicationStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Volume replication status." SYNTAX INTEGER { normal(1), faulty(2) } --****************************************************************************** -- -- Conformance -- --****************************************************************************** lhnNsmClusteringModuleConformance OBJECT IDENTIFIER ::= { lhnNsmClusteringModule 1 } lhnNsmClusteringModuleCompliances OBJECT IDENTIFIER ::= { lhnNsmClusteringModuleConformance 1 } lhnNsmClusteringModuleGroups OBJECT IDENTIFIER ::= { lhnNsmClusteringModuleConformance 2 } lefthandNetworksNsmClusteringMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement." MODULE MANDATORY-GROUPS { lefthandNetworksNsmClusteringGroup } ::= { lhnNsmClusteringModuleCompliances 1 } lefthandNetworksNsmClusteringGroup OBJECT-GROUP OBJECTS { clusMgmtGroupName, clusMgmtGroupIsEnabled, clusMgmtGroupQuorum, clusMgmtGroupActiveManagerCount, clusMgmtGroupManagerCount, clusMgmtGroupLicenseTimeRemaining, clusModuleCount, clusClusterCount, clusVolumeCount, clusServerCount, clusCommunicationMode, clusUnicastHostCount, clusSnapshotScheduleCount, clusMgmtGroupSiteCount, clusManagerName, clusManagerVersion, clusManagerHostSerialNo, clusManagerStatus, clusManagerIsVirtual, clusManagerIsFailover, clusModuleName, clusModuleVersion, clusModuleSerialNo, clusModuleUsableSpace, clusModuleAvailableSpace, clusModuleIsManager, clusModuleRaidConfiguration, clusModuleStorageState, clusModuleStorageStatus, clusModuleStorageIsReady, clusModuleCreationTime, clusModuleClusterName, clusModuleEnabledFeatures, clusModuleFeatureKey, clusModuleStorageCondition, clusModuleStatsStoreLatencyTotal, clusModuleProvisionedSpace, clusModuleUsedSpace, clusClusterName, clusClusterModuleCount, clusClusterVolumeCount, clusClusterDescription, clusClusterISNSCount, clusClusterISCSIVirtualIPCount, clusClusterISCSIVirtualIPEnabled, clusClusterAvailableSpace, clusClusterStatsIOsRead, clusClusterStatsIOsWrite, clusClusterStatsKbytesRead, clusClusterStatsKbytesWrite, clusClusterStatsQDepthRead, clusClusterStatsQDepthWrite, clusClusterStatsIoLatencyRead, clusClusterStatsIoLatencyWrite, clusClusterStatsCacheHits, clusClusterTotalSpace, clusClusterProvisionedSpace, clusClusterUsedSpace, clusClusterUtilization, clusClusterModuleName, clusClusterModuleSerialNo, clusClusterISNSHost, clusClusterISCSIVirtualIPAddress, clusClusterISCSIVirtualIPMask, clusVolumeName, clusVolumeCreationTime, clusVolumeDescription, clusVolumeSize, clusVolumeReplicaCount, clusVolumeSnapshotCount, clusVolumeACLCount, clusVolumeClusterName, clusVolumeReplicationStatus, clusVolumeIsRemoteSnapshot, clusVolumeRemoteSnapshotFailureMessage, clusVolumeAccessType, clusVolumeMinimumReplication, clusVolumeCreator, clusVolumeIscsiIqn, clusVolumeInitiatorCount, clusVolumeUsedSpace, clusVolumeClusterUsedPercent, clusVolumeProvisionedSpace, clusVolumeIsThinProvisioned, clusVolumeStatsIOsRead, clusVolumeStatsIOsWrite, clusVolumeStatsKbytesRead, clusVolumeStatsKbytesWrite, clusVolumeStatsQDepthRead, clusVolumeStatsQDepthWrite, clusVolumeStatsIoLatencyRead, clusVolumeStatsIoLatencyWrite, clusVolumeStatsCacheHits, clusVolumeAutoGrowSecondsDefault, clusVolumeAutoGrowSeconds, clusVolumeType, clusVolumeDataProtectionLevel, clusVolumePBNRStripes, clusVolumePBNRParity, clusVolumeAvailableSpace, clusVolumeUsedPercent, clusVolumeIsFull, clusVolumeACLServer, clusVolumeACLPermissions, clusVolumeInitiatorIqn, clusVolumeInitiatorAddress, clusVolumeInitiatorPort, clusVolumeInitiatorStatus, clusVolumeInitiatorStatsIOsRead, clusVolumeInitiatorStatsIOsWrite, clusVolumeInitiatorStatsKbytesRead, clusVolumeInitiatorStatsKbytesWrite, clusVolumeInitiatorStatsQDepthRead, clusVolumeInitiatorStatsQDepthWrite, clusVolumeInitiatorStatsIoLatencyRead, clusVolumeInitiatorStatsIoLatencyWrite, clusVolumeInitiatorStatsCacheHits, clusVolumeInitiatorState, clusClusterVolumeName, clusVolumeSnapshotName, clusVolumeSnapshotCreationTime, clusVolumeSnapshotDescription, clusVolumeSnapshotSize, clusVolumeSnapshotACLCount, clusVolumeSnapshotScheduleName, clusVolumeSnapshotReplicationStatus, clusVolumeSnapshotType, clusVolumeSnapshotCopyProgress, clusVolumeSnapshotAccessType, clusVolumeSnapshotCreator, clusVolumeSnapshotIscsiIqn, clusVolumeSnapshotFriendlyName, clusVolumeSnapshotOriginalVolume, clusVolumeSnapshotOriginalMgmtGroup, clusVolumeSnapshotInitiatorCount, clusVolumeSnapshotUsedSpace, clusVolumeSnapshotWritableProvisionedSpace, clusVolumeSnapshotClusterUsedPercent, clusVolumeSnapshotProvisionedSpace, clusVolumeSnapshotStatsIOsRead, clusVolumeSnapshotStatsIOsWrite, clusVolumeSnapshotStatsKbytesRead, clusVolumeSnapshotStatsKbytesWrite, clusVolumeSnapshotStatsQDepthRead, clusVolumeSnapshotStatsQDepthWrite, clusVolumeSnapshotStatsIoLatencyRead, clusVolumeSnapshotStatsIoLatencyWrite, clusVolumeSnapshotStatsCacheHits, clusVolumeSnapshotInitiatorStatus, clusVolumeSnapshotACLServer, clusVolumeSnapshotACLPermissions, clusVolumeSnapshotInitiatorIqn, clusVolumeSnapshotInitiatorAddress, clusVolumeSnapshotInitiatorPort, clusVolumeSnapshotInitiatorStatsIOsRead, clusVolumeSnapshotInitiatorStatsIOsWrite, clusVolumeSnapshotInitiatorStatsKbytesRead, clusVolumeSnapshotInitiatorStatsKbytesWrite, clusVolumeSnapshotInitiatorStatsQDepthRead, clusVolumeSnapshotInitiatorStatsQDepthWrite, clusVolumeSnapshotInitiatorStatsIoLatencyRead, clusVolumeSnapshotInitiatorStatsIoLatencyWrite, clusVolumeSnapshotInitiatorStatsCacheHits, clusVolumeSnapshotInitiatorState, clusUnicastHostName, clusSnapshotScheduleName, clusSnapshotScheduleDescription, clusSnapshotScheduleFirstCreationTime, clusSnapshotScheduleFrequency, clusSnapshotScheduleVolumeName, clusSnapshotScheduleRetainType, clusSnapshotScheduleRetainCount, clusSnapshotScheduleRetainTime, clusSnapshotScheduleType, clusSnapshotScheduleFailureMessage, clusSiteName, clusSiteDescription, clusSiteIsPrimary, clusSiteFailoverManager, clusSiteModuleCount, clusSiteModuleName, clusServerName, clusServerDescription, clusServerIscsiEnabled, clusServerIscsiChapAuthRequired, clusServerIscsiInitiatorCount, clusServerVolumeACLCount, clusServerIscsiInitiatorIqn, clusServerIscsiInitiatorChapName, clusServerVolumeACLVolume, clusServerVolumeACLPermissions } STATUS current DESCRIPTION "The default group for all NSM Clustering objects." ::= { lhnNsmClusteringModuleGroups 1 } lefthandNetworksNsmClusteringGroupObsolete OBJECT-GROUP OBJECTS { clusModuleDescription, clusMgmtGroupDescription, clusClusterHotSpareTimeout, clusClusterModuleIsHotSpare, clusVolumeAutoGrowPages, clusVolumeSoftThreshold, clusVolumeHardThreshold, clusVolumeIsSoftThresholdExceeded, clusVolumeIsHardThresholdExceeded, clusVolumeFriendlyName, clusSnapshotScheduleSoftThreshold, clusSnapshotScheduleHardThreshold, clusVolumeSnapshotSoftThreshold, clusVolumeSnapshotHardThreshold, clusVolumeSnapshotIsSoftThresholdExceeded, clusVolumeSnapshotIsHardThresholdExceeded, clusManagerRowStatus, clusModuleStatsIOsRead, clusModuleStatsIOsWrite, clusModuleStatsKbytesRead, clusModuleStatsKbytesWrite, clusModuleStatsQDepthTotal, clusModuleStatsIoLatencyRead, clusModuleStatsIoLatencyWrite, clusModuleRowStatus, clusClusterRowStatus, clusClusterModuleRowStatus, clusClusterISNSRowStatus, clusClusterISCSIVirtualIPRoute, clusClusterISCSIVirtualIPRowStatus, clusVolumeRowStatus, clusVolumeACLRowStatus, clusVolumeInitiatorRowStatus, clusClusterVolumeRowStatus, clusVolumeSnapshotRowStatus, clusVolumeSnapshotACLRowStatus, clusVolumeSnapshotInitiatorRowStatus, clusUnicastHostRowStatus, clusSnapshotScheduleRowStatus, clusSiteRowStatus, clusSiteModuleRowStatus, clusServerRowStatus, clusServerSubnetAddress, clusServerSubnetMask, clusServerSubnetRowStatus, clusServerIscsiInitiatorRowStatus, clusServerVolumeACLRowStatus } STATUS obsolete DESCRIPTION "The group for all obsolete and deprecated NSM Cluster objects." ::= { lhnNsmClusteringModuleGroups 2 } --****************************************************************************** -- -- Clustering Module Group Objects -- --****************************************************************************** clusMgmtGroupName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Management group name." ::= { lhnNsmClustering 1 } clusMgmtGroupIsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True if the storage module is in a management group, false otherwise." ::= { lhnNsmClustering 2 } clusMgmtGroupQuorum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum number of managers required to management group quorum and functionality." ::= { lhnNsmClustering 3 } clusMgmtGroupDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Management group description." ::= { lhnNsmClustering 4 } clusMgmtGroupActiveManagerCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active managers in the management group." ::= { lhnNsmClustering 5 } clusMgmtGroupManagerCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of managers in the management group." ::= { lhnNsmClustering 6 } clusMgmtGroupLicenseTimeRemaining OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before the feature license expires." ::= { lhnNsmClustering 43 } --****************************************************************************** -- -- Clustering Manager Objects -- -- Includes a table of all the managers that are part of the -- Management Group -- --****************************************************************************** clusManagerTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusManagerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of managers in the cluster. The number of entries is given by clusMgmtGroupManagerCount." ::= { lhnNsmClustering 44 } clusManagerEntry OBJECT-TYPE SYNTAX ClusManagerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of manager information." INDEX { clusManagerIndex } ::= { clusManagerTable 1 } ClusManagerEntry ::= SEQUENCE { clusManagerIndex Unsigned32, clusManagerName DisplayString, clusManagerVersion DisplayString, clusManagerHostSerialNo DisplayString, clusManagerStatus INTEGER, clusManagerIsVirtual TruthValue, clusManagerIsFailover TruthValue, clusManagerRowStatus RowStatus } clusManagerIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusManagerTable table." ::= { clusManagerEntry 1 } clusManagerName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The manager name." ::= { clusManagerEntry 2 } clusManagerVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The manager version." ::= { clusManagerEntry 3 } clusManagerHostSerialNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The manager serial number." ::= { clusManagerEntry 4 } clusManagerStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The manager status." ::= { clusManagerEntry 5 } clusManagerIsVirtual OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True if manager is virtual, false otherwise." ::= { clusManagerEntry 7 } clusManagerIsFailover OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True if manager is a failover manager, false otherwise." ::= { clusManagerEntry 9 } clusManagerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Table row status. Obsolete in SAN/iQ 8.5." ::= { clusManagerEntry 10 } --****************************************************************************** -- -- Clustering Module Objects -- -- Includes the count of modules (storage modules) and a table describing -- these modules from the clustering point of view. --****************************************************************************** clusModuleCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of storage systems in the cluster." ::= { lhnNsmClustering 45 } clusModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of storage systems in the cluster. The number of entries is given by clusModuleCount." ::= { lhnNsmClustering 46 } clusModuleEntry OBJECT-TYPE SYNTAX ClusModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of storage system information." INDEX { clusModuleIndex } ::= { clusModuleTable 1 } ClusModuleEntry ::= SEQUENCE { clusModuleIndex Unsigned32, clusModuleName DisplayString, clusModuleVersion DisplayString, clusModuleSerialNo DisplayString, clusModuleUsableSpace CounterBasedGauge64, clusModuleAvailableSpace CounterBasedGauge64, clusModuleIsManager TruthValue, clusModuleRaidConfiguration DisplayString, clusModuleStorageState DisplayString, clusModuleStorageStatus INTEGER, clusModuleStorageIsReady TruthValue, clusModuleCreationTime DateAndTime, clusModuleDescription DisplayString, clusModuleClusterName DisplayString, clusModuleEnabledFeatures ClusFeatureBits, clusModuleFeatureKey DisplayString, clusModuleStorageCondition INTEGER, clusModuleStatsIOsRead Counter64, clusModuleStatsIOsWrite Counter64, clusModuleStatsKbytesRead Counter64, clusModuleStatsKbytesWrite Counter64, clusModuleStatsQDepthTotal Gauge32, clusModuleStatsIoLatencyRead Counter64, clusModuleStatsIoLatencyWrite Counter64, clusModuleStatsStoreLatencyTotal Counter64, clusModuleProvisionedSpace CounterBasedGauge64, clusModuleUsedSpace CounterBasedGauge64, clusModuleRowStatus RowStatus } clusModuleIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusModuleTable table." ::= { clusModuleEntry 1 } clusModuleName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The storage system hostname." ::= { clusModuleEntry 2 } clusModuleVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The storage system SAN/iQ version." ::= { clusModuleEntry 3 } clusModuleSerialNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The storage system serial number." ::= { clusModuleEntry 4 } clusModuleUsableSpace OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total space available for data storage on the storage module." ::= { clusModuleEntry 5 } clusModuleAvailableSpace OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The current space available for data storage on the storage module." ::= { clusModuleEntry 6 } clusModuleIsManager OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True if storage system is a manager, false otherwise." ::= { clusModuleEntry 7 } clusModuleRaidConfiguration OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The storage system RAID configuration." ::= { clusModuleEntry 8 } clusModuleStorageState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the storage system storage server to store data. Use 'storageRaidState' to check the state of the RAID device(s)." ::= { clusModuleEntry 9 } clusModuleStorageStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The storage system storage server status." ::= { clusModuleEntry 10 } clusModuleStorageIsReady OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True if the storage in a module is ready, false otherwise." ::= { clusModuleEntry 11 } clusModuleCreationTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time the sotrage module was added to the cluster." ::= { clusModuleEntry 12 } clusModuleDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The storage module description." ::= { clusModuleEntry 13 } clusModuleClusterName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the cluster the storage modue is in. Empty if the storage module is not in a cluster." ::= { clusModuleEntry 14 } clusModuleEnabledFeatures OBJECT-TYPE SYNTAX ClusFeatureBits MAX-ACCESS read-only STATUS current DESCRIPTION "The set of features that are enabled." ::= { clusModuleEntry 16 } clusModuleFeatureKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The feature key." ::= { clusModuleEntry 17 } clusModuleStorageCondition OBJECT-TYPE SYNTAX INTEGER { notReady(1), inoperable(2), overloaded(3), ready(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the storage on the storage module." ::= { clusModuleEntry 19 } clusModuleStatsIOsRead OBJECT-TYPE SYNTAX Counter64 UNITS "operations" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Obsolete, use storageRaidStatsIOsRead" ::= { clusModuleEntry 20 } clusModuleStatsIOsWrite OBJECT-TYPE SYNTAX Counter64 UNITS "operations" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Obsolete, use storageRaidStatsIOsWrite" ::= { clusModuleEntry 21 } clusModuleStatsKbytesRead OBJECT-TYPE SYNTAX Counter64 UNITS "Kbytes" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Obsolete, use storageRaidStatsKbytesRead" ::= { clusModuleEntry 22 } clusModuleStatsKbytesWrite OBJECT-TYPE SYNTAX Counter64 UNITS "Kbytes" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Obsolete, use storageRaidStatsKbytesWrite" ::= { clusModuleEntry 23 } clusModuleStatsQDepthTotal OBJECT-TYPE SYNTAX Gauge32 UNITS "operations" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Obsolete, use storageRaidStatsQDepthTotal" ::= { clusModuleEntry 24 } clusModuleStatsIoLatencyRead OBJECT-TYPE SYNTAX Counter64 UNITS "ms" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Obsolete, use storageRaidStatsIoLatencyRead" ::= { clusModuleEntry 25 } clusModuleStatsIoLatencyWrite OBJECT-TYPE SYNTAX Counter64 UNITS "ms" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Obsolete, use storageRaidStatsIoLatencyWrite" ::= { clusModuleEntry 26 } clusModuleStatsStoreLatencyTotal OBJECT-TYPE SYNTAX Counter64 UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The total time spent waiting for IO operations to complete on the storage module." ::= { clusModuleEntry 27 } clusModuleProvisionedSpace OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of storage space that has been provisioned on the storage module." ::= { clusModuleEntry 28 } clusModuleUsedSpace OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of storage space that has been used on the storage module." ::= { clusModuleEntry 29 } clusModuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The table row status. Obsolete in SAN/iQ 8.5." ::= { clusModuleEntry 99 } --****************************************************************************** -- -- Clustering Cluster Objects -- -- Includes a count of clusters in the management group and a table -- describing each cluster. -- --****************************************************************************** clusClusterCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of clusters in the management group." ::= { lhnNsmClustering 47 } clusClusterTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusClusterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of clusters in the management group. The number of entries is given by clusClusterCount." ::= { lhnNsmClustering 48 } clusClusterEntry OBJECT-TYPE SYNTAX ClusClusterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of cluster information." INDEX { clusClusterIndex } ::= { clusClusterTable 1 } ClusClusterEntry ::= SEQUENCE { clusClusterIndex Unsigned32, clusClusterName DisplayString, clusClusterModuleCount Gauge32, clusClusterVolumeCount Gauge32, clusClusterDescription DisplayString, clusClusterHotSpareTimeout CounterBasedGauge64, clusClusterISNSCount Gauge32, clusClusterISCSIVirtualIPCount Gauge32, clusClusterISCSIVirtualIPEnabled TruthValue, clusClusterAvailableSpace CounterBasedGauge64, clusClusterStatsIOsRead Counter64, clusClusterStatsIOsWrite Counter64, clusClusterStatsKbytesRead Counter64, clusClusterStatsKbytesWrite Counter64, clusClusterStatsQDepthRead Gauge32, clusClusterStatsQDepthWrite Gauge32, clusClusterStatsIoLatencyRead Counter64, clusClusterStatsIoLatencyWrite Counter64, clusClusterStatsCacheHits Counter64, clusClusterTotalSpace CounterBasedGauge64, clusClusterProvisionedSpace CounterBasedGauge64, clusClusterUsedSpace CounterBasedGauge64, clusClusterUtilization Gauge32, clusClusterRowStatus RowStatus } clusClusterIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusClusterTable table." ::= { clusClusterEntry 1 } clusClusterName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The cluster name." ::= { clusClusterEntry 2 } clusClusterModuleCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of storage modules in the cluster." ::= { clusClusterEntry 3 } clusClusterVolumeCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of volumes in the cluster." ::= { clusClusterEntry 4 } clusClusterDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A description of the cluster." ::= { clusClusterEntry 5 } clusClusterHotSpareTimeout OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "seconds" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of seconds to wait before a hot spare takes over. Deprecated in SAN/iQ 7.0." ::= { clusClusterEntry 7 } clusClusterISNSCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of iSNS entries for the cluster." ::= { clusClusterEntry 8 } clusClusterISCSIVirtualIPCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of iSCSI Virtual IP entries for this cluster." ::= { clusClusterEntry 15 } clusClusterISCSIVirtualIPEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True if the iSCSI Virtual IPs are enabled, false otherwise." ::= { clusClusterEntry 16 } clusClusterAvailableSpace OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "Space available to create volumes (assuming one replica) in the cluster. Divide by the number of replicas to obtain the true number." ::= { clusClusterEntry 17 } clusClusterStatsIOsRead OBJECT-TYPE SYNTAX Counter64 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "A counter of IO read operations in the cluster." ::= { clusClusterEntry 20 } clusClusterStatsIOsWrite OBJECT-TYPE SYNTAX Counter64 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "A counter of IO write operations in the cluster." ::= { clusClusterEntry 21 } clusClusterStatsKbytesRead OBJECT-TYPE SYNTAX Counter64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of kB read from the cluster." ::= { clusClusterEntry 22 } clusClusterStatsKbytesWrite OBJECT-TYPE SYNTAX Counter64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of kB written to the cluster." ::= { clusClusterEntry 23 } clusClusterStatsQDepthRead OBJECT-TYPE SYNTAX Gauge32 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of pending read operations in the cluster." ::= { clusClusterEntry 24 } clusClusterStatsQDepthWrite OBJECT-TYPE SYNTAX Gauge32 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of pending write operations in the cluster." ::= { clusClusterEntry 25 } clusClusterStatsIoLatencyRead OBJECT-TYPE SYNTAX Counter64 UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The total time spent waiting for read operations to complete in the cluster." ::= { clusClusterEntry 26 } clusClusterStatsIoLatencyWrite OBJECT-TYPE SYNTAX Counter64 UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The total time spent waiting for write operations to complete in the cluster." ::= { clusClusterEntry 27 } clusClusterStatsCacheHits OBJECT-TYPE SYNTAX Counter64 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of read cache hits and read ahead hits in the cluster." ::= { clusClusterEntry 28 } clusClusterTotalSpace OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total space for data storage in the cluster." ::= { clusClusterEntry 29 } clusClusterProvisionedSpace OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of storage space that has been provisioned in the cluster." ::= { clusClusterEntry 30 } clusClusterUsedSpace OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of storage space that has been used in the cluster." ::= { clusClusterEntry 31 } clusClusterUtilization OBJECT-TYPE SYNTAX Gauge32 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of storage space that has been used in the cluster." ::= { clusClusterEntry 32 } clusClusterRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The table row status. Obsolete in SAN/iQ 8.5." ::= { clusClusterEntry 99 } --****************************************************************************** -- -- Clustering Cluster Module Objects -- -- This table describes the relationship between clusters -- and modules (storage modules). For each cluster (described by the -- clusClusterIndex) it lists each module belonging to it. -- --****************************************************************************** clusClusterModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusClusterModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of modules for a cluster. The number of entries is given by clusClusterModuleCount." ::= { lhnNsmClustering 49 } clusClusterModuleEntry OBJECT-TYPE SYNTAX ClusClusterModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of cluster storage modules." INDEX { clusClusterIndex, clusClusterModuleIndex } ::= { clusClusterModuleTable 1 } ClusClusterModuleEntry ::= SEQUENCE { clusClusterModuleIndex Unsigned32, clusClusterModuleName DisplayString, clusClusterModuleSerialNo DisplayString, clusClusterModuleIsHotSpare TruthValue, clusClusterModuleRowStatus RowStatus } clusClusterModuleIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusClusterModuleTable table." ::= { clusClusterModuleEntry 1 } clusClusterModuleName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The storage module name." ::= { clusClusterModuleEntry 2 } clusClusterModuleSerialNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The storage module serial number." ::= { clusClusterModuleEntry 3 } clusClusterModuleIsHotSpare OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "True if the storage module is a hot spare, false otherwise. Deprecated in SAN/iQ 7.0." ::= { clusClusterModuleEntry 4 } clusClusterModuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The table row status. Obsolete in SAN/iQ 8.5." ::= { clusClusterModuleEntry 5 } --****************************************************************************** -- -- Clustering Cluster iSNS Objects -- -- This table describes the relationship between clusters -- and iSNS entries. For each cluster (described by the -- clusClusterIndex) it lists each iSNS server used by it. -- --****************************************************************************** clusClusterISNSTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusClusterISNSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of iSNS entries for a cluster. The number of entries is given by clusClusterISNSCount." ::= { lhnNsmClustering 50 } clusClusterISNSEntry OBJECT-TYPE SYNTAX ClusClusterISNSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of cluster iSNS servers." INDEX { clusClusterIndex, clusClusterISNSIndex } ::= { clusClusterISNSTable 1 } ClusClusterISNSEntry ::= SEQUENCE { clusClusterISNSIndex Unsigned32, clusClusterISNSHost DisplayString, clusClusterISNSRowStatus RowStatus } clusClusterISNSIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusClusterISNSTable table." ::= { clusClusterISNSEntry 1 } clusClusterISNSHost OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name or IP address of the iSNS server." ::= { clusClusterISNSEntry 2 } clusClusterISNSRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The table row status. Obsolete in SAN/iQ 8.5." ::= { clusClusterISNSEntry 5 } --****************************************************************************** -- -- Clustering Cluster Virtual IP Objects -- -- This table describes the relationship between clusters -- and Virtual IP. For each cluster (described by the -- clusClusterIndex) it lists each Virtual IP belonging to it. -- --****************************************************************************** clusClusterISCSIVirtualIPTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusClusterISCSIVirtualIPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Virtual IPs for a cluster. The number of entries is given by clusClusterISCSIVirtualIPCount." ::= { lhnNsmClustering 95 } clusClusterISCSIVirtualIPEntry OBJECT-TYPE SYNTAX ClusClusterISCSIVirtualIPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of cluster virtual IPs." INDEX { clusClusterIndex, clusClusterISCSIVirtualIPIndex } ::= { clusClusterISCSIVirtualIPTable 1 } ClusClusterISCSIVirtualIPEntry ::= SEQUENCE { clusClusterISCSIVirtualIPIndex Unsigned32, clusClusterISCSIVirtualIPAddress IpAddress, clusClusterISCSIVirtualIPMask IpAddress, clusClusterISCSIVirtualIPRoute IpAddress, clusClusterISCSIVirtualIPRowStatus RowStatus } clusClusterISCSIVirtualIPIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusClusterISCSIVirtualIPTable table." ::= { clusClusterISCSIVirtualIPEntry 1 } clusClusterISCSIVirtualIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The cluster virtual IP address." ::= { clusClusterISCSIVirtualIPEntry 2 } clusClusterISCSIVirtualIPMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The netmask for the virtual IP address." ::= { clusClusterISCSIVirtualIPEntry 3 } clusClusterISCSIVirtualIPRoute OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The default route for the virtual IP address." ::= { clusClusterISCSIVirtualIPEntry 4 } clusClusterISCSIVirtualIPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The table row status. Obsolete in SAN/iQ 8.5." ::= { clusClusterISCSIVirtualIPEntry 5 } --****************************************************************************** -- -- Clustering Volume Objects -- -- Includes a count of all the volumes belonging to this management group -- and a table describing all the volumes. -- --****************************************************************************** clusVolumeCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of volumes in the cluster." ::= { lhnNsmClustering 96 } clusVolumeTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusVolumeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of volumes in the cluster. The number of entries is given by clusVolumeCount." ::= { lhnNsmClustering 97 } clusVolumeEntry OBJECT-TYPE SYNTAX ClusVolumeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of volume information." INDEX { clusVolumeIndex } ::= { clusVolumeTable 1 } ClusVolumeEntry ::= SEQUENCE { clusVolumeIndex Unsigned32, clusVolumeName DisplayString, clusVolumeCreationTime DateAndTime, clusVolumeDescription DisplayString, clusVolumeSize CounterBasedGauge64, clusVolumeSoftThreshold CounterBasedGauge64, clusVolumeHardThreshold CounterBasedGauge64, clusVolumeReplicaCount Integer32, clusVolumeSnapshotCount Gauge32, clusVolumeACLCount Gauge32, clusVolumeClusterName DisplayString, clusVolumeIsSoftThresholdExceeded TruthValue, clusVolumeIsHardThresholdExceeded TruthValue, clusVolumeReplicationStatus ClusReplicationStatus, clusVolumeIsRemoteSnapshot TruthValue, clusVolumeRemoteSnapshotFailureMessage DisplayString, clusVolumeAccessType DisplayString, clusVolumeMinimumReplication Gauge32, clusVolumeCreator ClusCreatorTypes, clusVolumeAutoGrowPages Integer32, clusVolumeIscsiIqn DisplayString, clusVolumeFriendlyName DisplayString, clusVolumeInitiatorCount Gauge32, clusVolumeUsedSpace CounterBasedGauge64, clusVolumeClusterUsedPercent Gauge32, clusVolumeProvisionedSpace CounterBasedGauge64, clusVolumeIsThinProvisioned TruthValue, clusVolumeStatsIOsRead Counter64, clusVolumeStatsIOsWrite Counter64, clusVolumeStatsKbytesRead Counter64, clusVolumeStatsKbytesWrite Counter64, clusVolumeStatsQDepthRead Gauge32, clusVolumeStatsQDepthWrite Gauge32, clusVolumeStatsIoLatencyRead Counter64, clusVolumeStatsIoLatencyWrite Counter64, clusVolumeStatsCacheHits Counter64, clusVolumeAutoGrowSecondsDefault Integer32, clusVolumeAutoGrowSeconds Gauge32, clusVolumeType INTEGER, clusVolumeDataProtectionLevel DisplayString, clusVolumePBNRStripes Gauge32, clusVolumePBNRParity Gauge32, clusVolumeAvailableSpace CounterBasedGauge64, clusVolumeUsedPercent Gauge32, clusVolumeIsFull TruthValue, clusVolumeRowStatus RowStatus } clusVolumeIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusVolumeTable table." ::= { clusVolumeEntry 1 } clusVolumeName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The volume name." ::= { clusVolumeEntry 2 } clusVolumeCreationTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time the volume was created." ::= { clusVolumeEntry 3 } clusVolumeDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The volume description." ::= { clusVolumeEntry 4 } clusVolumeSize OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The volume size. (Reported Size)" ::= { clusVolumeEntry 5 } clusVolumeSoftThreshold OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of kB to be used before alert is issued. This is not displayed if space management is enabled. Deprecated in SAN/iQ 8.0." ::= { clusVolumeEntry 6 } clusVolumeHardThreshold OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of kB to be used before the volume stops. This is not displayed if space management is enabled. Deprecated in SAN/iQ 8.0." ::= { clusVolumeEntry 7 } clusVolumeReplicaCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The volume replication level. This is only valid for volumes that use Mirrored Replication and is not used for volumes that use Parity Based Netowrk RAID (PBNR). (Use clusVolumeType to determine volume type)." ::= { clusVolumeEntry 8 } clusVolumeSnapshotCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of snapshots associated with this volume." ::= { clusVolumeEntry 9 } clusVolumeACLCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ACLs associated with this volume." ::= { clusVolumeEntry 10 } clusVolumeClusterName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of cluster that this volume belongs to. Empty if the storage module is not in a cluster." ::= { clusVolumeEntry 11 } clusVolumeIsSoftThresholdExceeded OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "True is the soft threshold has been exceeded, false otherwise. This is not displayed if space management is enabled. Deprecated in SAN/iQ 8.0." ::= { clusVolumeEntry 13 } clusVolumeIsHardThresholdExceeded OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "True is the hard threshold has been exceeded, false otherwise. This is not displayed if space management is enabled. Deprecated in SAN/iQ 8.0." ::= { clusVolumeEntry 14 } clusVolumeReplicationStatus OBJECT-TYPE SYNTAX ClusReplicationStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The volume replication status. The status will be normal if the volume is available, faulty otherwise." ::= { clusVolumeEntry 15 } clusVolumeIsRemoteSnapshot OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True if this volume is a remote snapshot, false otherwise." ::= { clusVolumeEntry 16 } clusVolumeRemoteSnapshotFailureMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A message indicating why a remote snapshot into this volume failed. Empty if there are no errors." ::= { clusVolumeEntry 17 } clusVolumeAccessType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Access type for the volume (iSCSI, etc). Only displayed if volume lists are not supported by the manager. Otherwise access type is implied by the volume list auth group." ::= { clusVolumeEntry 19 } clusVolumeMinimumReplication OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum number of replicas required for writes to proceed. This is only valid for volumes that use Mirrored Replication and is not used for volumes that use Parity Based Netowrk RAID (PBNR). (Use clusVolumeType to determine volume type)." ::= { clusVolumeEntry 20 } clusVolumeCreator OBJECT-TYPE SYNTAX ClusCreatorTypes MAX-ACCESS read-only STATUS current DESCRIPTION "The entity created this volume." ::= { clusVolumeEntry 22 } clusVolumeAutoGrowPages OBJECT-TYPE SYNTAX Integer32 UNITS "256K pages" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The nominal number of pages autogrow should grow by. (0 = no autogrow, 1 = automatic) Deprecated in SAN/iQ 9.0, use clusVolumeAutoGrowSeconds" ::= { clusVolumeEntry 24 } clusVolumeIscsiIqn OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The iSCSI IQN for the volume." ::= { clusVolumeEntry 25 } clusVolumeFriendlyName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The friendly name for the volume. Deprecated in SAN/iQ 8.0" ::= { clusVolumeEntry 27 } clusVolumeInitiatorCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of initiator sessions." ::= { clusVolumeEntry 30 } clusVolumeUsedSpace OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The space used by the volume. This does not include space used by snapshots that the volume depends on." ::= { clusVolumeEntry 31 } clusVolumeClusterUsedPercent OBJECT-TYPE SYNTAX Gauge32 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "The space used by the volume as a percentage of the cluster space." ::= { clusVolumeEntry 32 } clusVolumeProvisionedSpace OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The space provisioned for the volume. (Provisioned Space)" ::= { clusVolumeEntry 33 } clusVolumeIsThinProvisioned OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True if volume uses thin provisioning, false otherwise." ::= { clusVolumeEntry 34 } clusVolumeStatsIOsRead OBJECT-TYPE SYNTAX Counter64 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "A counter of IO read operations for the volume." ::= { clusVolumeEntry 36 } clusVolumeStatsIOsWrite OBJECT-TYPE SYNTAX Counter64 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "A counter of IO write operations for the volume." ::= { clusVolumeEntry 37 } clusVolumeStatsKbytesRead OBJECT-TYPE SYNTAX Counter64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of kB read from the volume." ::= { clusVolumeEntry 38 } clusVolumeStatsKbytesWrite OBJECT-TYPE SYNTAX Counter64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of kB written to the volume." ::= { clusVolumeEntry 39 } clusVolumeStatsQDepthRead OBJECT-TYPE SYNTAX Gauge32 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of pending read operations for the volume." ::= { clusVolumeEntry 40 } clusVolumeStatsQDepthWrite OBJECT-TYPE SYNTAX Gauge32 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of pending write operations for the volume." ::= { clusVolumeEntry 41 } clusVolumeStatsIoLatencyRead OBJECT-TYPE SYNTAX Counter64 UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The total time spent waiting for read operations to complete for the volume." ::= { clusVolumeEntry 42 } clusVolumeStatsIoLatencyWrite OBJECT-TYPE SYNTAX Counter64 UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The total time spent waiting for write operations to complete for the volume." ::= { clusVolumeEntry 43 } clusVolumeStatsCacheHits OBJECT-TYPE SYNTAX Counter64 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of read cache hits and read ahead hits for the volume." ::= { clusVolumeEntry 44 } clusVolumeAutoGrowSecondsDefault OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The default number of seconds of IO available before autogrow starts." ::= { clusVolumeEntry 45 } clusVolumeAutoGrowSeconds OBJECT-TYPE SYNTAX Gauge32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of seconds of IO available before autogrow starts." ::= { clusVolumeEntry 46 } clusVolumeType OBJECT-TYPE SYNTAX INTEGER { mr(1), pbnr(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The volume type. 'MR' = Mirrored Replication, 'PBNR' = Parity Based Network RAID." ::= { clusVolumeEntry 47 } clusVolumeDataProtectionLevel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The data protection level for the volume." ::= { clusVolumeEntry 48 } clusVolumePBNRStripes OBJECT-TYPE SYNTAX Gauge32 UNITS "pages" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of data pages in a stripe for a PBNR volume. (Use clusVolumeType to determine volume type)." ::= { clusVolumeEntry 49 } clusVolumePBNRParity OBJECT-TYPE SYNTAX Gauge32 UNITS "pages" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of parity pages in a stripe for a PBNR volume. (Use clusVolumeType to determine volume type)." ::= { clusVolumeEntry 50 } clusVolumeAvailableSpace OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The storage space available in the volume before the size is reached. For thinly provisioned volumes the cluster must have sufficient storage space to support this." ::= { clusVolumeEntry 51 } clusVolumeUsedPercent OBJECT-TYPE SYNTAX Gauge32 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of storage space that has been used on the volume." ::= { clusVolumeEntry 52 } clusVolumeIsFull OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True if the volume is full, false otherwise." ::= { clusVolumeEntry 53 } clusVolumeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The table row status. Obsolete in SAN/iQ 8.5." ::= { clusVolumeEntry 99 } --****************************************************************************** -- -- Clustering Volume ACL Objects -- -- This table contains the authorization communities and permissions -- to allow access for a particular volume. This table is only displayed -- if Volume List objects are not supported by the manager database. -- --****************************************************************************** clusVolumeACLTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusVolumeACLEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of ACL entries for each volume. The number of entries is given by clusVolumeACLCount." ::= { lhnNsmClustering 98 } clusVolumeACLEntry OBJECT-TYPE SYNTAX ClusVolumeACLEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of authorization and permissions for a volume." INDEX { clusVolumeIndex, clusVolumeACLIndex } ::= { clusVolumeACLTable 1 } ClusVolumeACLEntry ::= SEQUENCE { clusVolumeACLIndex Unsigned32, clusVolumeACLServer DisplayString, clusVolumeACLPermissions ClusPermissionBits, clusVolumeACLRowStatus RowStatus } clusVolumeACLIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusVolumeACLTable table." ::= { clusVolumeACLEntry 1 } clusVolumeACLServer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The server (authorization group) name." ::= { clusVolumeACLEntry 2 } clusVolumeACLPermissions OBJECT-TYPE SYNTAX ClusPermissionBits MAX-ACCESS read-only STATUS current DESCRIPTION "The permissions bits." ::= { clusVolumeACLEntry 3 } clusVolumeACLRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Table row status. Obsolete in SAN/iQ 8.5." ::= { clusVolumeACLEntry 6 } --****************************************************************************** -- -- Clustering Volume Initiator Objects -- -- This table contains the parameters associated with an initiator session -- for a particular volume. This table is only displayed if initiator session -- objects are supported by the manager database. -- --****************************************************************************** clusVolumeInitiatorTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusVolumeInitiatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of initiator session entries for each volume. The number of entries is given by clusVolumeInitiatorCount." ::= { lhnNsmClustering 99 } clusVolumeInitiatorEntry OBJECT-TYPE SYNTAX ClusVolumeInitiatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of initiator parameters for a volume." INDEX { clusVolumeIndex, clusVolumeInitiatorIndex } ::= { clusVolumeInitiatorTable 1 } ClusVolumeInitiatorEntry ::= SEQUENCE { clusVolumeInitiatorIndex Unsigned32, clusVolumeInitiatorIqn DisplayString, clusVolumeInitiatorAddress IpAddress, clusVolumeInitiatorPort Unsigned32, clusVolumeInitiatorStatus DisplayString, clusVolumeInitiatorStatsIOsRead Counter64, clusVolumeInitiatorStatsIOsWrite Counter64, clusVolumeInitiatorStatsKbytesRead Counter64, clusVolumeInitiatorStatsKbytesWrite Counter64, clusVolumeInitiatorStatsQDepthRead Gauge32, clusVolumeInitiatorStatsQDepthWrite Gauge32, clusVolumeInitiatorStatsIoLatencyRead Counter64, clusVolumeInitiatorStatsIoLatencyWrite Counter64, clusVolumeInitiatorStatsCacheHits Counter64, clusVolumeInitiatorState DisplayString, clusVolumeInitiatorRowStatus RowStatus } clusVolumeInitiatorIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusVolumeInitiatorTable table." ::= { clusVolumeInitiatorEntry 1 } clusVolumeInitiatorIqn OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The initiator IQN." ::= { clusVolumeInitiatorEntry 2 } clusVolumeInitiatorAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The initiator IP address." ::= { clusVolumeInitiatorEntry 3 } clusVolumeInitiatorPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The initiator port number." ::= { clusVolumeInitiatorEntry 4 } clusVolumeInitiatorStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The initiator session status. Obsolete in SAN/iQ 8.0" ::= { clusVolumeInitiatorEntry 5 } clusVolumeInitiatorStatsIOsRead OBJECT-TYPE SYNTAX Counter64 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "A counter of IO read operations for the initiator." ::= { clusVolumeInitiatorEntry 6 } clusVolumeInitiatorStatsIOsWrite OBJECT-TYPE SYNTAX Counter64 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "A counter of IO write operations for the initiator." ::= { clusVolumeInitiatorEntry 7 } clusVolumeInitiatorStatsKbytesRead OBJECT-TYPE SYNTAX Counter64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of kB read from the initiator." ::= { clusVolumeInitiatorEntry 8 } clusVolumeInitiatorStatsKbytesWrite OBJECT-TYPE SYNTAX Counter64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of kB written to the initiator." ::= { clusVolumeInitiatorEntry 9 } clusVolumeInitiatorStatsQDepthRead OBJECT-TYPE SYNTAX Gauge32 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of pending read operations for the initiator." ::= { clusVolumeInitiatorEntry 10 } clusVolumeInitiatorStatsQDepthWrite OBJECT-TYPE SYNTAX Gauge32 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of pending write operations for the initiator." ::= { clusVolumeInitiatorEntry 11 } clusVolumeInitiatorStatsIoLatencyRead OBJECT-TYPE SYNTAX Counter64 UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The total time spent waiting for read operations to complete on the initiator." ::= { clusVolumeInitiatorEntry 12 } clusVolumeInitiatorStatsIoLatencyWrite OBJECT-TYPE SYNTAX Counter64 UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The total time spent waiting for write operations to complete on the initiator." ::= { clusVolumeInitiatorEntry 13 } clusVolumeInitiatorStatsCacheHits OBJECT-TYPE SYNTAX Counter64 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of read cache hits and read ahead hits for the initiator." ::= { clusVolumeInitiatorEntry 14 } clusVolumeInitiatorState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The initiator session state." ::= { clusVolumeInitiatorEntry 15 } clusVolumeInitiatorRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The table row status. Obsolete in SAN/iQ 8.5." ::= { clusVolumeInitiatorEntry 99 } --****************************************************************************** -- -- Clustering Cluster Volume Objects -- -- This table describes the relationship between clusters -- and volumes. For each cluster (described by the -- clusClusterIndex) it lists each volume belonging to it. -- --****************************************************************************** clusClusterVolumeTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusClusterVolumeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of volumes for a cluster. The number of entries is given by clusClusterVolumeCount." ::= { lhnNsmClustering 100 } clusClusterVolumeEntry OBJECT-TYPE SYNTAX ClusClusterVolumeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of volume information for a cluster." INDEX { clusClusterIndex, clusClusterVolumeIndex } ::= { clusClusterVolumeTable 1 } ClusClusterVolumeEntry ::= SEQUENCE { clusClusterVolumeIndex Unsigned32, clusClusterVolumeName DisplayString, clusClusterVolumeRowStatus RowStatus } clusClusterVolumeIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusClusterVolumeTable table." ::= { clusClusterVolumeEntry 1 } clusClusterVolumeName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The volume name." ::= { clusClusterVolumeEntry 2 } clusClusterVolumeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The table row status. Obsolete in SAN/iQ 8.5." ::= { clusClusterVolumeEntry 3 } --****************************************************************************** -- -- Clustering Volume Snapshot Table -- -- This table describes the relationship between snapshots -- and volumes. For each volume (described by the -- clusVolumeIndex) it lists each snapshot belonging -- to it. -- --****************************************************************************** clusVolumeSnapshotTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusVolumeSnapshotEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of snapshots for a volume. The number of entries is given by clusVolumeSnapshotCount." ::= { lhnNsmClustering 101 } clusVolumeSnapshotEntry OBJECT-TYPE SYNTAX ClusVolumeSnapshotEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of snapshot information for a volume." INDEX { clusVolumeIndex, clusVolumeSnapshotIndex } ::= { clusVolumeSnapshotTable 1 } ClusVolumeSnapshotEntry ::= SEQUENCE { clusVolumeSnapshotIndex Unsigned32, clusVolumeSnapshotName DisplayString, clusVolumeSnapshotCreationTime DateAndTime, clusVolumeSnapshotDescription DisplayString, clusVolumeSnapshotSize CounterBasedGauge64, clusVolumeSnapshotSoftThreshold CounterBasedGauge64, clusVolumeSnapshotHardThreshold CounterBasedGauge64, clusVolumeSnapshotACLCount Gauge32, clusVolumeSnapshotScheduleName DisplayString, clusVolumeSnapshotIsSoftThresholdExceeded TruthValue, clusVolumeSnapshotIsHardThresholdExceeded TruthValue, clusVolumeSnapshotReplicationStatus ClusReplicationStatus, clusVolumeSnapshotType INTEGER, clusVolumeSnapshotCopyProgress Gauge32, clusVolumeSnapshotAccessType DisplayString, clusVolumeSnapshotCreator ClusCreatorTypes, clusVolumeSnapshotIscsiIqn DisplayString, clusVolumeSnapshotFriendlyName DisplayString, clusVolumeSnapshotOriginalVolume DisplayString, clusVolumeSnapshotOriginalMgmtGroup DisplayString, clusVolumeSnapshotInitiatorCount Gauge32, clusVolumeSnapshotUsedSpace CounterBasedGauge64, clusVolumeSnapshotWritableProvisionedSpace CounterBasedGauge64, clusVolumeSnapshotClusterUsedPercent Gauge32, clusVolumeSnapshotProvisionedSpace CounterBasedGauge64, clusVolumeSnapshotStatsIOsRead Counter64, clusVolumeSnapshotStatsIOsWrite Counter64, clusVolumeSnapshotStatsKbytesRead Counter64, clusVolumeSnapshotStatsKbytesWrite Counter64, clusVolumeSnapshotStatsQDepthRead Gauge32, clusVolumeSnapshotStatsQDepthWrite Gauge32, clusVolumeSnapshotStatsIoLatencyRead Counter64, clusVolumeSnapshotStatsIoLatencyWrite Counter64, clusVolumeSnapshotStatsCacheHits Counter64, clusVolumeSnapshotRowStatus RowStatus } clusVolumeSnapshotIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusVolumeSnapshotTable table." ::= { clusVolumeSnapshotEntry 1 } clusVolumeSnapshotName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The snapshot name." ::= { clusVolumeSnapshotEntry 2 } clusVolumeSnapshotCreationTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The snapshot creation time." ::= { clusVolumeSnapshotEntry 3 } clusVolumeSnapshotDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The snapshot description." ::= { clusVolumeSnapshotEntry 4 } clusVolumeSnapshotSize OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The snapshot size. (Reported Size)" ::= { clusVolumeSnapshotEntry 5 } clusVolumeSnapshotSoftThreshold OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of kB to be used before alert is issued. This is not displayed if space management is enabled. Deprecated in SAN/iQ 8.0." ::= { clusVolumeSnapshotEntry 6 } clusVolumeSnapshotHardThreshold OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of kB to be used before the snapshot stops. This is not displayed if space management is enabled. Deprecated in SAN/iQ 8.0." ::= { clusVolumeSnapshotEntry 7 } clusVolumeSnapshotACLCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ACLs associated with this snapshot." ::= { clusVolumeSnapshotEntry 8 } clusVolumeSnapshotScheduleName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The snapshot schedule name. Empty for manual snapshots." ::= { clusVolumeSnapshotEntry 10 } clusVolumeSnapshotIsSoftThresholdExceeded OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "True if soft threshold has been exceeded, false otherwise." ::= { clusVolumeSnapshotEntry 12 } clusVolumeSnapshotIsHardThresholdExceeded OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "True if hard threshold has been exceeded, false otherwise." ::= { clusVolumeSnapshotEntry 13 } clusVolumeSnapshotReplicationStatus OBJECT-TYPE SYNTAX ClusReplicationStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The snapshot replication status. The status will be normal if the snapshot is available, faulty otherwise." ::= { clusVolumeSnapshotEntry 14 } clusVolumeSnapshotType OBJECT-TYPE SYNTAX INTEGER { primary(1), remote(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The snapshot type." ::= { clusVolumeSnapshotEntry 15 } clusVolumeSnapshotCopyProgress OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "The remote snapshot percent complete." ::= { clusVolumeSnapshotEntry 16 } clusVolumeSnapshotAccessType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Access type for the snapshot (iSCSI, etc). Only displayed if volume lists are not supported by the manager. Otherwise access type is implied by the volume list auth group." ::= { clusVolumeSnapshotEntry 18 } clusVolumeSnapshotCreator OBJECT-TYPE SYNTAX ClusCreatorTypes MAX-ACCESS read-only STATUS current DESCRIPTION "which entity created this volume" ::= { clusVolumeSnapshotEntry 20 } clusVolumeSnapshotIscsiIqn OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The snapshot iSCSI IQN." ::= { clusVolumeSnapshotEntry 22 } clusVolumeSnapshotFriendlyName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The snapshot friendly name." ::= { clusVolumeSnapshotEntry 24 } clusVolumeSnapshotOriginalVolume OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The volume name the snapshot originated from for a remote snapshot." ::= { clusVolumeSnapshotEntry 25 } clusVolumeSnapshotOriginalMgmtGroup OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The management group name the snapshot originated from for a remote snapshot." ::= { clusVolumeSnapshotEntry 26 } clusVolumeSnapshotInitiatorCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of initiator sessions to this snapshot." ::= { clusVolumeSnapshotEntry 27 } clusVolumeSnapshotUsedSpace OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The space used by the snapshot." ::= { clusVolumeSnapshotEntry 28 } clusVolumeSnapshotWritableProvisionedSpace OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum writable space used by snapshot." ::= { clusVolumeSnapshotEntry 29} clusVolumeSnapshotClusterUsedPercent OBJECT-TYPE SYNTAX Gauge32 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "The space used by the snapshot as a percentage of the cluster space." ::= { clusVolumeSnapshotEntry 31 } clusVolumeSnapshotProvisionedSpace OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The space provisioned for use by the snapshot." ::= { clusVolumeSnapshotEntry 32 } clusVolumeSnapshotStatsIOsRead OBJECT-TYPE SYNTAX Counter64 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "A counter of IO read operations on the snapshot." ::= { clusVolumeSnapshotEntry 36 } clusVolumeSnapshotStatsIOsWrite OBJECT-TYPE SYNTAX Counter64 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "A counter of IO write operations on the snapshot." ::= { clusVolumeSnapshotEntry 37 } clusVolumeSnapshotStatsKbytesRead OBJECT-TYPE SYNTAX Counter64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of kB read from the snapshot." ::= { clusVolumeSnapshotEntry 38 } clusVolumeSnapshotStatsKbytesWrite OBJECT-TYPE SYNTAX Counter64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of kB written to the snapshot." ::= { clusVolumeSnapshotEntry 39 } clusVolumeSnapshotStatsQDepthRead OBJECT-TYPE SYNTAX Gauge32 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of pending read operations for the snapshot" ::= { clusVolumeSnapshotEntry 40 } clusVolumeSnapshotStatsQDepthWrite OBJECT-TYPE SYNTAX Gauge32 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of pending write operations for the snapshot" ::= { clusVolumeSnapshotEntry 41 } clusVolumeSnapshotStatsIoLatencyRead OBJECT-TYPE SYNTAX Counter64 UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The total time spent waiting for read operations to complete on the snapshot." ::= { clusVolumeSnapshotEntry 42 } clusVolumeSnapshotStatsIoLatencyWrite OBJECT-TYPE SYNTAX Counter64 UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The total time spent waiting for write operations to complete on the snapshot." ::= { clusVolumeSnapshotEntry 43 } clusVolumeSnapshotStatsCacheHits OBJECT-TYPE SYNTAX Counter64 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of read cache hits and read ahead hits for the snapshot." ::= { clusVolumeSnapshotEntry 44 } clusVolumeSnapshotRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The table row status. Obsolete in SAN/iQ 8.5." ::= { clusVolumeSnapshotEntry 99 } --****************************************************************************** -- -- Clustering Volume Snapshot ACL Objects -- -- This table contains the authorization communities and permissions for -- a particular volume snapshot. This table is only displayed -- if Volume List objects are not supported by the manager database. -- --****************************************************************************** clusVolumeSnapshotACLTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusVolumeSnapshotACLEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of authorization and permissions for each snapshot. The number of entries is given by clusVolumeSnapshotACLCount." ::= { lhnNsmClustering 102 } clusVolumeSnapshotACLEntry OBJECT-TYPE SYNTAX ClusVolumeSnapshotACLEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of authorization and permissions for a snapshot." INDEX { clusVolumeIndex, clusVolumeSnapshotIndex, clusVolumeSnapshotACLIndex } ::= { clusVolumeSnapshotACLTable 1 } ClusVolumeSnapshotACLEntry ::= SEQUENCE { clusVolumeSnapshotACLIndex Unsigned32, clusVolumeSnapshotACLServer DisplayString, clusVolumeSnapshotACLPermissions ClusPermissionBits, clusVolumeSnapshotACLRowStatus RowStatus } clusVolumeSnapshotACLIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusVolumeSnapshotACLTable table." ::= { clusVolumeSnapshotACLEntry 1 } clusVolumeSnapshotACLServer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the server (authorization group)." ::= { clusVolumeSnapshotACLEntry 2 } clusVolumeSnapshotACLPermissions OBJECT-TYPE SYNTAX ClusPermissionBits MAX-ACCESS read-only STATUS current DESCRIPTION "The permissions associated with this ACL." ::= { clusVolumeSnapshotACLEntry 3 } clusVolumeSnapshotACLRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The table row status. Obsolete in SAN/iQ 8.5." ::= { clusVolumeSnapshotACLEntry 6 } --****************************************************************************** -- -- Clustering Volume Snapshot Initiator Objects -- -- This table contains the parameters associated with an initiator session -- for a particular volume snapshot. This table is only displayed if -- initiator session objects are supported by the manager database. -- --****************************************************************************** clusVolumeSnapshotInitiatorTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusVolumeSnapshotInitiatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of initiator session entries for each snapshot. The number of entries is given by clusVolumeSnapshotInitiatorCount." ::= { lhnNsmClustering 103 } clusVolumeSnapshotInitiatorEntry OBJECT-TYPE SYNTAX ClusVolumeSnapshotInitiatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of initiator information for a snapshot." INDEX { clusVolumeIndex, clusVolumeSnapshotIndex, clusVolumeSnapshotInitiatorIndex } ::= { clusVolumeSnapshotInitiatorTable 1 } ClusVolumeSnapshotInitiatorEntry ::= SEQUENCE { clusVolumeSnapshotInitiatorIndex Unsigned32, clusVolumeSnapshotInitiatorIqn DisplayString, clusVolumeSnapshotInitiatorAddress IpAddress, clusVolumeSnapshotInitiatorPort Unsigned32, clusVolumeSnapshotInitiatorStatus DisplayString, clusVolumeSnapshotInitiatorStatsIOsRead Counter64, clusVolumeSnapshotInitiatorStatsIOsWrite Counter64, clusVolumeSnapshotInitiatorStatsKbytesRead Counter64, clusVolumeSnapshotInitiatorStatsKbytesWrite Counter64, clusVolumeSnapshotInitiatorStatsQDepthRead Gauge32, clusVolumeSnapshotInitiatorStatsQDepthWrite Gauge32, clusVolumeSnapshotInitiatorStatsIoLatencyRead Counter64, clusVolumeSnapshotInitiatorStatsIoLatencyWrite Counter64, clusVolumeSnapshotInitiatorStatsCacheHits Counter64, clusVolumeSnapshotInitiatorState DisplayString, clusVolumeSnapshotInitiatorRowStatus RowStatus } clusVolumeSnapshotInitiatorIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusVolumeSnapshotInitiatorTable table." ::= { clusVolumeSnapshotInitiatorEntry 1 } clusVolumeSnapshotInitiatorIqn OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The initiator IQN." ::= { clusVolumeSnapshotInitiatorEntry 2 } clusVolumeSnapshotInitiatorAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The initiator IP address." ::= { clusVolumeSnapshotInitiatorEntry 3 } clusVolumeSnapshotInitiatorPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The initiator port number." ::= { clusVolumeSnapshotInitiatorEntry 4 } clusVolumeSnapshotInitiatorStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The initiator session status. Obsolete in SAN/iQ 8.0." ::= { clusVolumeSnapshotInitiatorEntry 5 } clusVolumeSnapshotInitiatorStatsIOsRead OBJECT-TYPE SYNTAX Counter64 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "A counter of IO read operations on the initiator." ::= { clusVolumeSnapshotInitiatorEntry 6 } clusVolumeSnapshotInitiatorStatsIOsWrite OBJECT-TYPE SYNTAX Counter64 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "A counter of IO read operations on the initiator." ::= { clusVolumeSnapshotInitiatorEntry 7 } clusVolumeSnapshotInitiatorStatsKbytesRead OBJECT-TYPE SYNTAX Counter64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of kB read from the initiator." ::= { clusVolumeSnapshotInitiatorEntry 8 } clusVolumeSnapshotInitiatorStatsKbytesWrite OBJECT-TYPE SYNTAX Counter64 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of kB written to the initiator." ::= { clusVolumeSnapshotInitiatorEntry 9 } clusVolumeSnapshotInitiatorStatsQDepthRead OBJECT-TYPE SYNTAX Gauge32 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of pending read operations on the initiator." ::= { clusVolumeSnapshotInitiatorEntry 10 } clusVolumeSnapshotInitiatorStatsQDepthWrite OBJECT-TYPE SYNTAX Gauge32 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of pending write operations on the initiator." ::= { clusVolumeSnapshotInitiatorEntry 11 } clusVolumeSnapshotInitiatorStatsIoLatencyRead OBJECT-TYPE SYNTAX Counter64 UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The total time spent waiting for read operations to complete on the initiator." ::= { clusVolumeSnapshotInitiatorEntry 12 } clusVolumeSnapshotInitiatorStatsIoLatencyWrite OBJECT-TYPE SYNTAX Counter64 UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The total time spent waiting for read operations to complete on the initiator." ::= { clusVolumeSnapshotInitiatorEntry 13 } clusVolumeSnapshotInitiatorStatsCacheHits OBJECT-TYPE SYNTAX Counter64 UNITS "operations" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of read cache hits and read ahead hits for the initiator." ::= { clusVolumeSnapshotInitiatorEntry 14 } clusVolumeSnapshotInitiatorState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The initiator session status." ::= { clusVolumeSnapshotInitiatorEntry 15 } clusVolumeSnapshotInitiatorRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The table row status. Obsolete in SAN/iQ 8.5." ::= { clusVolumeSnapshotInitiatorEntry 99 } --****************************************************************************** -- -- Clustering Server (Authorization Group) Objects -- -- This table contains the list of all servers (authorization groups). -- --****************************************************************************** clusServerCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of server (authorization groups) in the cluster." ::= { lhnNsmClustering 104 } clusServerTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of hosts for each server (authorization group). The number of entries is given by clusServerCount." ::= { lhnNsmClustering 105 } clusServerEntry OBJECT-TYPE SYNTAX ClusServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of server (authorization group) information." INDEX { clusServerIndex } ::= { clusServerTable 1 } ClusServerEntry ::= SEQUENCE { clusServerIndex Unsigned32, clusServerName DisplayString, clusServerDescription DisplayString, clusServerIscsiEnabled TruthValue, clusServerIscsiChapAuthRequired TruthValue, clusServerIscsiInitiatorCount Gauge32, clusServerVolumeACLCount Gauge32, clusServerRowStatus RowStatus } clusServerIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusServerTable table." ::= { clusServerEntry 1 } clusServerName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The server (authorization group) name." ::= { clusServerEntry 2 } clusServerDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The description of the server (authorization group)." ::= { clusServerEntry 3 } clusServerIscsiEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True if iSCSI is enabled, false otherwise." ::= { clusServerEntry 22 } clusServerIscsiChapAuthRequired OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The iSCSI server only accepts initiators with the specified chap name if true." ::= { clusServerEntry 23 } clusServerIscsiInitiatorCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of iSCSI CHAP names required for the server (authorization group)." ::= { clusServerEntry 25 } clusServerVolumeACLCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of volume ACLs in the Volume List." ::= { clusServerEntry 30 } clusServerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The table row status. Obsolete in SAN/iQ 8.5." ::= { clusServerEntry 99 } --****************************************************************************** -- -- Clustering Server (Authorization Group) Subnets -- -- This table contains a list of subnet masks -- associated with an server (authorization group). For each -- server (authorization group) (given by clusServerIndex) -- it lists the subnet masks belonging to it. -- --****************************************************************************** clusServerSubnetTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusServerSubnetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of subnets for a particular sevrer (authorization group). The number of entries is given by clusServerMaskCount." ::= { lhnNsmClustering 106 } clusServerSubnetEntry OBJECT-TYPE SYNTAX ClusServerSubnetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of subnet information for an server (authorization group)." INDEX { clusServerIndex, clusServerSubnetIndex } ::= { clusServerSubnetTable 1 } ClusServerSubnetEntry ::= SEQUENCE { clusServerSubnetIndex Unsigned32, clusServerSubnetAddress IpAddress, clusServerSubnetMask IpAddress, clusServerSubnetRowStatus RowStatus } clusServerSubnetIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusServerSubnetTable table." ::= { clusServerSubnetEntry 1 } clusServerSubnetAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The address portion of the subnet." ::= { clusServerSubnetEntry 2 } clusServerSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The netmask portion of the subnet." ::= { clusServerSubnetEntry 3 } clusServerSubnetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The table row status. Obsolete in SAN/iQ 8.5." ::= { clusServerSubnetEntry 4 } --****************************************************************************** -- -- Clustering Server (Authorization Group) iSCSI Initiators -- -- This table contains a list of iSCSI initiators -- associated with an server (authorization group). For each -- server (authorization group) (given by clusServerIndex) -- it lists the iSCSI initiators belonging to it. -- --****************************************************************************** clusServerIscsiInitiatorTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusServerIscsiInitiatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of iSCSI hosts for a particular server (authorization group). The number of entries is given by clusServerIscsiInitiatorCount." ::= { lhnNsmClustering 107 } clusServerIscsiInitiatorEntry OBJECT-TYPE SYNTAX ClusServerIscsiInitiatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of iSCSI initiators for an server (authorization group)." INDEX { clusServerIndex, clusServerIscsiInitiatorIndex } ::= { clusServerIscsiInitiatorTable 1 } ClusServerIscsiInitiatorEntry ::= SEQUENCE { clusServerIscsiInitiatorIndex Unsigned32, clusServerIscsiInitiatorIqn DisplayString, clusServerIscsiInitiatorChapName DisplayString, clusServerIscsiInitiatorRowStatus RowStatus } clusServerIscsiInitiatorIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusServerIscsiInitiatorTable table." ::= { clusServerIscsiInitiatorEntry 1 } clusServerIscsiInitiatorIqn OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The iSCSI IQN for initiator." ::= { clusServerIscsiInitiatorEntry 5 } clusServerIscsiInitiatorChapName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The iSCSI initiator CHAP name." ::= { clusServerIscsiInitiatorEntry 6 } clusServerIscsiInitiatorRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The table row status. Obsolete in SAN/iQ 8.5." ::= { clusServerIscsiInitiatorEntry 7 } --****************************************************************************** -- -- Clustering Communication Mode -- -- This table contains a list of hosts in the case of -- using unicast. If using multicast the list will be -- empty and the mode will be 'multicast'. -- --****************************************************************************** clusCommunicationMode OBJECT-TYPE SYNTAX INTEGER { multicast(1), unicast(2), multicastAndUnicast(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The cluster communication mode." ::= { lhnNsmClustering 109 } clusUnicastHostCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of hosts that are unicast communication. These hosts must be running a manager." ::= { lhnNsmClustering 110 } clusUnicastHostTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusUnicastHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of hosts using unicast communication. The number of entries is given by clusUnicastHostCount." ::= { lhnNsmClustering 111 } clusUnicastHostEntry OBJECT-TYPE SYNTAX ClusUnicastHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of unicast host information." INDEX { clusUnicastHostIndex } ::= { clusUnicastHostTable 1 } ClusUnicastHostEntry ::= SEQUENCE { clusUnicastHostIndex Unsigned32, clusUnicastHostName DisplayString, clusUnicastHostRowStatus RowStatus } clusUnicastHostIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusUnicastHostTable table." ::= { clusUnicastHostEntry 1 } clusUnicastHostName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address used for unicast communications used by the manager." ::= { clusUnicastHostEntry 2 } clusUnicastHostRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The table row status. Obsolete in SAN/iQ 8.5." ::= { clusUnicastHostEntry 3 } --****************************************************************************** -- -- Clustering Snapshot Schedules -- -- This table contains a list of schedules for automatic -- volume snapshots. -- --****************************************************************************** clusSnapshotScheduleCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of snapshot schedules in the cluster." ::= { lhnNsmClustering 112 } clusSnapshotScheduleTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusSnapshotScheduleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of snapshot schedules entries. The number of entries is given by clusSnapshotScheduleCount." ::= { lhnNsmClustering 113 } clusSnapshotScheduleEntry OBJECT-TYPE SYNTAX ClusSnapshotScheduleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of snapshot schdule information." INDEX { clusSnapshotScheduleIndex } ::= { clusSnapshotScheduleTable 1 } ClusSnapshotScheduleEntry ::= SEQUENCE { clusSnapshotScheduleIndex Unsigned32, clusSnapshotScheduleName DisplayString, clusSnapshotScheduleDescription DisplayString, clusSnapshotScheduleSoftThreshold CounterBasedGauge64, clusSnapshotScheduleHardThreshold CounterBasedGauge64, clusSnapshotScheduleFirstCreationTime DateAndTime, clusSnapshotScheduleFrequency Gauge32, clusSnapshotScheduleVolumeName DisplayString, clusSnapshotScheduleRetainType INTEGER, clusSnapshotScheduleRetainCount Gauge32, clusSnapshotScheduleRetainTime Gauge32, clusSnapshotScheduleType INTEGER, clusSnapshotScheduleFailureMessage DisplayString, clusSnapshotScheduleRowStatus RowStatus } clusSnapshotScheduleIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusSnapshotScheduleTable table." ::= { clusSnapshotScheduleEntry 1 } clusSnapshotScheduleName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The snapshot schedule name." ::= { clusSnapshotScheduleEntry 2 } clusSnapshotScheduleDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The snapshot schedule description." ::= { clusSnapshotScheduleEntry 3 } clusSnapshotScheduleSoftThreshold OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The snapshot soft threshold." ::= { clusSnapshotScheduleEntry 4 } clusSnapshotScheduleHardThreshold OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kB" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The snapshot hard threshold." ::= { clusSnapshotScheduleEntry 5 } clusSnapshotScheduleFirstCreationTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The first snapshot creation time." ::= { clusSnapshotScheduleEntry 6 } clusSnapshotScheduleFrequency OBJECT-TYPE SYNTAX Gauge32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The snapshot frequency." ::= { clusSnapshotScheduleEntry 7 } clusSnapshotScheduleVolumeName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the volume from which to create snapshots." ::= { clusSnapshotScheduleEntry 8 } clusSnapshotScheduleRetainType OBJECT-TYPE SYNTAX INTEGER { byTime(1), byNumber(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The retention method." ::= { clusSnapshotScheduleEntry 9 } clusSnapshotScheduleRetainCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of snapshot to retain. 0 if clusSnapshotScheduleRetainType is byTime(1)." ::= { clusSnapshotScheduleEntry 10 } clusSnapshotScheduleRetainTime OBJECT-TYPE SYNTAX Gauge32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The duration to retain the snapshot for. 0 if clusSnapshotScheduleRetainType is byNumber(2)." ::= { clusSnapshotScheduleEntry 11 } clusSnapshotScheduleType OBJECT-TYPE SYNTAX INTEGER { normal(1), primary(2), remote(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The snapshot schedule type. normal(1) - without remote snapshot primary(2) - the original in a remote snapshot remote(3) - remote snapshot" ::= { clusSnapshotScheduleEntry 13 } clusSnapshotScheduleFailureMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A message indicating why snapshot failed. Empty if there are no errors." ::= { clusSnapshotScheduleEntry 14 } clusSnapshotScheduleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The table row status. Obsolete in SAN/iQ 8.5." ::= { clusSnapshotScheduleEntry 15 } --****************************************************************************** -- -- Clustering Site Objects -- -- Includes a count of volume lists in the management group and a table -- describing each volume list. -- --****************************************************************************** clusMgmtGroupSiteCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sites in the management group." ::= { lhnNsmClustering 118 } clusSiteTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusSiteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of sites for a management group. The number of entries is given by clusMgmtGroupSiteCount. This is only used for Mult-Site clusters." ::= { lhnNsmClustering 119 } clusSiteEntry OBJECT-TYPE SYNTAX ClusSiteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of site information." INDEX { clusSiteIndex } ::= { clusSiteTable 1 } ClusSiteEntry ::= SEQUENCE { clusSiteIndex Unsigned32, clusSiteName DisplayString, clusSiteDescription DisplayString, clusSiteIsPrimary TruthValue, clusSiteFailoverManager DisplayString, clusSiteModuleCount Gauge32, clusSiteRowStatus RowStatus } clusSiteIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusSiteTable table." ::= { clusSiteEntry 1 } clusSiteName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The site name. This is only used for Mult-Site clusters." ::= { clusSiteEntry 2 } clusSiteDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The site description. This is only used for Mult-Site clusters." ::= { clusSiteEntry 3 } clusSiteIsPrimary OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True if site is primary, false otherwise. This is only used for Mult-Site clusters." ::= { clusSiteEntry 4 } clusSiteFailoverManager OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the failover manager if any exists. This is only used for Mult-Site clusters." ::= { clusSiteEntry 5 } clusSiteModuleCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of storage modules in the site. This is only used for Mult-Site clusters." ::= { clusSiteEntry 6 } clusSiteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The table row status. Obsolete in SAN/iQ 8.5." ::= { clusSiteEntry 7 } --****************************************************************************** -- -- Clustering Site Module Objects -- -- This table contains the modules -- that belong a particular site -- --****************************************************************************** clusSiteModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusSiteModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of module entries for each site. The number of entries is given by clusSiteModuleCount." ::= { lhnNsmClustering 120 } clusSiteModuleEntry OBJECT-TYPE SYNTAX ClusSiteModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of storage module information for a site." INDEX { clusSiteIndex, clusSiteModuleIndex } ::= { clusSiteModuleTable 1 } ClusSiteModuleEntry ::= SEQUENCE { clusSiteModuleIndex Unsigned32, clusSiteModuleName DisplayString, clusSiteModuleRowStatus RowStatus } clusSiteModuleIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusSiteModuleTable table." ::= { clusSiteModuleEntry 1 } clusSiteModuleName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of module." ::= { clusSiteModuleEntry 2 } clusSiteModuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The table row status. Obsolete in SAN/iQ 8.5." ::= { clusSiteModuleEntry 3 } --****************************************************************************** -- -- Clustering Server (Authorization Group) Volume ACL Objects -- -- This table contains the permissions -- to allow access in a particular volume list for a volume. -- --****************************************************************************** clusServerVolumeACLTable OBJECT-TYPE SYNTAX SEQUENCE OF ClusServerVolumeACLEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of ACL entries for each volume list. The number of entries is given by clusServerVolumeACLCount." ::= { lhnNsmClustering 121 } clusServerVolumeACLEntry OBJECT-TYPE SYNTAX ClusServerVolumeACLEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of authorization and permissions for a volume list." INDEX { clusServerIndex, clusServerVolumeACLIndex } ::= { clusServerVolumeACLTable 1 } ClusServerVolumeACLEntry ::= SEQUENCE { clusServerVolumeACLIndex Unsigned32, clusServerVolumeACLVolume DisplayString, clusServerVolumeACLPermissions ClusPermissionBits, clusServerVolumeACLRowStatus RowStatus } clusServerVolumeACLIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the clusServerVolumeACLTable table." ::= { clusServerVolumeACLEntry 1 } clusServerVolumeACLVolume OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The volume containing this ACL." ::= { clusServerVolumeACLEntry 2 } clusServerVolumeACLPermissions OBJECT-TYPE SYNTAX ClusPermissionBits MAX-ACCESS read-only STATUS current DESCRIPTION "The permissions bits." ::= { clusServerVolumeACLEntry 3 } clusServerVolumeACLRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The table row status. Obsolete in SAN/iQ 8.5." ::= { clusServerVolumeACLEntry 5 } END -- END: some MIB compilers require a CR/LF after the END statement --