MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-09 13:01:50 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Merge pull request #7 from 0x3c0/removed-duplicates

Browse Source 
Removed files with duplicate SHA1 hashes
This commit is contained in:
hs-cx 2016-12-17 08:21:29 -07:00 committed by GitHub
commit 911d4637bb
1645 changed files with 0 additions and 1540471 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1028
snmp_mib_archive/ACCOUNTING-CONTROL-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

1345
snmp_mib_archive/ACTONA-ACTASTOR-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

304
snmp_mib_archive/ADMIN-AUTH-STATS-MIB.my 2
View File

@ -1,304 +0,0 @@
-- *------------------------------------------------------------------
-- * ADMIN-AUTH-STATS-MIB.my: The Altiga Administrator Authentication Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ADMIN-AUTH-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, IpAddress, Counter32, TimeTicks
FROM SNMPv2-SMI
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alAdminAuthStats, alAdminAuthGroup
FROM ALTIGA-MIB
alAdminAuthMibModule
FROM ALTIGA-GLOBAL-REG;
altigaAdminAuthStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga Administrator Authentication Statistics MIB models counters and objects that are
of management interest for administration authentication.
Acronyms
The following acronyms are used in this document:
IP: Internet Protocol
MIB: Management Information Base
TACACS: Terminal Access Controller Access Control System
UDP: User Datagram Protocol
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alAdminAuthMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alAminAuthStatsGlobal OBJECT IDENTIFIER ::= { alAdminAuthStats 1 }
alAdminAuthServStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlAdminAuthServStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the TACACS authentication
servers with which the client shares a secret."
::= { alAdminAuthStats 2 }
alAdminAuthServStatsEntry OBJECT-TYPE
SYNTAX AlAdminAuthServStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a TACACS
authentication server with which the client shares a secret."
INDEX { alAdminAuthServIndex }
::= { alAdminAuthServStatsTable 1 }
AlAdminAuthServStatsEntry ::= SEQUENCE {
alAdminAuthServIndex Integer32,
alAdminAuthServAddress IpAddress,
alAdminAuthClientServerPortNumber Integer32,
alAdminAuthClientRoundTripTime TimeTicks,
alAdminAuthClientAccessRequests Counter32,
alAdminAuthClientAccessRetransmissions Counter32,
alAdminAuthClientAccessAccepts Counter32,
alAdminAuthClientAccessRejects Counter32,
alAdminAuthClientAccessChallenges Counter32,
alAdminAuthClientMalformedAccessResponses Counter32,
alAdminAuthClientBadAuthenticators Counter32,
alAdminAuthClientPendingRequests Gauge32,
alAdminAuthClientTimeouts Counter32,
alAdminAuthClientUnknownType Counter32,
alAdminAuthServerGroupIdentification Gauge32
}
alAdminAuthServIndex OBJECT-TYPE
SYNTAX Integer32 (0..MAX)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying each ADMIN
Authentication server with which this client
communicates."
::= { alAdminAuthServStatsEntry 1 }
alAdminAuthServAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the ADMIN authentication server
referred to in this table entry."
::= { alAdminAuthServStatsEntry 2 }
alAdminAuthClientServerPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UDP port the client is using to send requests to
this server."
::= { alAdminAuthServStatsEntry 3 }
alAdminAuthClientRoundTripTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interval between the most recent
Access-Reply/Access-Challenge and the Access-Request that
matched it from this ADMIN authentication server."
::= { alAdminAuthServStatsEntry 4 }
-- Request/Response statistics
-- Ignoring Unknown Types, then
-- AccessRequests + AccesssRetransmissions = AccessAccepts +
-- AccessRejects + AccessChallenges + PendingRequests + Timeouts
alAdminAuthClientAccessRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ADMIN Access-Request packets sent
to this server since client start-up. This does not
include retransmissions."
::= { alAdminAuthServStatsEntry 5 }
alAdminAuthClientAccessRetransmissions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ADMIN Access-Request packets
retransmitted to this ADMIN authentication server
since client start-up."
::= { alAdminAuthServStatsEntry 6 }
alAdminAuthClientAccessAccepts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ADMIN Access-Accept packets
received from this server since client start-up."
::= { alAdminAuthServStatsEntry 7 }
alAdminAuthClientAccessRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ADMIN Access-Reject packets
received from this server since client start-up."
::= { alAdminAuthServStatsEntry 8 }
alAdminAuthClientAccessChallenges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ADMIN Access-Challenge packets
received from this server since client start-up."
::= { alAdminAuthServStatsEntry 9 }
-- "Access-Response" includes an Access-Accept, Access-Challenge
-- or Access-Reject
alAdminAuthClientMalformedAccessResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of malformed ADMIN Access-Response
packets received from this server since client
start-up. Malformed packets include packets with
an invalid length. Bad authenticators or
Signature attributes are not
included as malformed access responses."
::= { alAdminAuthServStatsEntry 10 }
alAdminAuthClientBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ADMIN Access-Response packets
containing invalid authenticators or Signature
attributes received from this server since client
start-up."
::= { alAdminAuthServStatsEntry 11 }
alAdminAuthClientPendingRequests OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ADMIN Access-Request packets
destined for this server that have not yet timed out
or received a response. This variable is incremented
when an Access-Request is sent and decremented due to
receipt of an Access-Reply or Access-Challenge,
a timeout or retransmission."
::= { alAdminAuthServStatsEntry 12 }
alAdminAuthClientTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of authentication timeouts to this server
since client startup. After a timeout the client may
retry to the same server, send to a different server, or
give up. A retry to the same server is counted as a
retransmit as well as a timeout. A send to a different
server is counted as a Request as well as a timeout."
::= { alAdminAuthServStatsEntry 13 }
alAdminAuthClientUnknownType OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ADMIN packets of unknown type which
were received from this server on the authentication port
since client start-up."
::= { alAdminAuthServStatsEntry 14 }
alAdminAuthServerGroupIdentification OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Id of group accociated with this server."
::= { alAdminAuthServStatsEntry 15 }
altigaAdminAuthStatsMibConformance OBJECT IDENTIFIER ::= { altigaAdminAuthStatsMibModule 1 }
altigaAdminAuthStatsMibCompliances OBJECT IDENTIFIER ::= { altigaAdminAuthStatsMibConformance 1 }
altigaAdminAuthStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga Administrator Authentication Statistics MIB."
MODULE
MANDATORY-GROUPS {
alAdminAuthClientMIBGroup
}
::= { altigaAdminAuthStatsMibCompliances 1 }
alAdminAuthClientMIBGroup OBJECT-GROUP
OBJECTS {
alAdminAuthServAddress,
alAdminAuthClientServerPortNumber,
alAdminAuthClientRoundTripTime,
alAdminAuthClientAccessRequests,
alAdminAuthClientAccessRetransmissions,
alAdminAuthClientAccessAccepts,
alAdminAuthClientAccessRejects,
alAdminAuthClientAccessChallenges,
alAdminAuthClientMalformedAccessResponses,
alAdminAuthClientBadAuthenticators,
alAdminAuthClientPendingRequests,
alAdminAuthClientTimeouts,
alAdminAuthClientUnknownType,
alAdminAuthServerGroupIdentification
}
STATUS current
DESCRIPTION
"The basic collection of objects providing management of
ADMIN Authentication Clients."
::= { alAdminAuthGroup 2 }
END

637
snmp_mib_archive/ADSL-DMT-LINE-MIB.my 2
View File

@ -1,637 +0,0 @@
-- *****************************************************************
-- Descriptions of managed objects for ADSL DMT line interfaces.
--
-- March 1999, Patrick Gili
--
-- Copyright (c) 1999 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
-- This mib was extracted from RFC xxxx
ADSL-DMT-LINE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
ifIndex FROM IF-MIB
adslLCSMib,
adslLineConfProfileName FROM ADSL-LINE-MIB;
adslLineDmtMIB MODULE-IDENTITY
LAST-UPDATED "9809251000Z"
ORGANIZATION "ADSL Forum"
CONTACT-INFO "Kevin Godfrey
Motorola Inc.
Colvilles Road, East Kilbride,
Glasgow, United Kingdom.
Tel: +44 1355 565597
Fax: +44 1355 261790
E-mail: ttz864@email.sps.mot.com"
DESCRIPTION
"Naming Conventions:
Atuc -- (ATUC) modem at near (Central) end of line
Atur -- (ATUR) modem at Remote end of line
ES -- Errored Second.
LCS -- Line Code Specific
Lof -- Loss of Frame
Lol -- Loss of Link
Los -- Loss of Signal
Lpr -- Loss of Power"
::= { adslLCSMib 2 }
adslLineDmtMIBObjects OBJECT IDENTIFIER ::= { adslLineDmtMIB 1 }
-- ADSL DMT Line Table
adslLineDmtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdslLineDmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the adslLineTable and contains common attributes
describing both ends of ADSL lines supported by the system."
::= { adslLineDmtMIBObjects 1 }
adslLineDmtEntry OBJECT-TYPE
SYNTAX AdslLineDmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of common attributes describing both ends of an ADSL line
supported by the system. There exist an entry for each ifEntry with
an ifType of adsl(94)."
INDEX { ifIndex }
::= { adslLineDmtTable 1 }
AdslLineDmtEntry ::= SEQUENCE {
adslLineDmtTrellis INTEGER,
adslLineDmtEOC INTEGER
}
adslLineDmtTrellis OBJECT-TYPE
SYNTAX INTEGER {
trellisOn(1),
trellisOff(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports whether the Trellis coding is used on the DMT
line. Use of trellis coding is determined at line
initialization with C-MSGS1 and R-MSGS1 exchanges
and will not change until the line is re-initialized."
::= { adslLineDmtEntry 1 }
adslLineDmtEOC OBJECT-TYPE
SYNTAX INTEGER {
unknown(1), -- eoc mode is unknown yet
transaction(2), -- eoc only operates in original
-- transaction mode
streaming(3) -- eoc supports autonomous data
-- streaming mode and original
-- transaction mode
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports whether the eoc can support autonomous data streaming
mode or only transaction mode. After initialization, unknown
is reported until sufficient autonomous eoc messages have been
transmitted to determine the true capability of both ATUs."
::= { adslLineDmtEntry 2 }
-- ADSL ATU-C DMT Physical-Layer Parameters Table
adslAtucDmtPhysTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdslAtucDmtPhysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the adslAtucPhysTable and contains specific
physical layer parameters for the ATU-C class devices supported
by the system."
::= { adslLineDmtMIBObjects 2 }
adslAtucDmtPhysEntry OBJECT-TYPE
SYNTAX AdslAtucDmtPhysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of physical-layer parameters for an ATU-C class device
supported by the system. There exists an entry for each ifEntry
with an ifType of adsl(94)."
INDEX { ifIndex }
::= { adslAtucDmtPhysTable 1 }
AdslAtucDmtPhysEntry ::= SEQUENCE {
adslAtucDmtIssue INTEGER,
adslAtucDmtState INTEGER,
adslAtucDmtInterleavePath INTEGER,
adslAtucDmtFastPath INTEGER
}
adslAtucDmtIssue OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- unknown or other
t1413Issue1(2), -- ANSI T1.413 Issue 1
t1413Issue2(3), -- ANSI T1.413 Issue 2
t1413Issue3(4), -- ANSI T1.413 Issue 3
gdmtIssue1(5), -- ITU G.dmt Issue 1
etsiIssue1(6) -- ETSI DMT Issue 1
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports the issue number of the relevant standard that the
DMT ADSL transceiver at the ATU-C is currently operating to.
The issue number will be fixed by the hardware and is
transmitted by the ATU-C in C-MSGS1 during initialization."
::= { adslAtucDmtPhysEntry 1 }
adslAtucDmtState OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- Unknown or other state
powerUp(2), -- DMT transceiver not yet
-- configured
configure(3), -- DMT transceiver being configured
idle(4), -- transceiver is initialized but
-- idle
quiet(5), -- awaiting activation request from
-- ATU-R
tone(6), -- requesting ATU-R to be silent
activating(7), -- activation in progress
training(8), -- transceiver training in progress
analyzing(9), -- channel analysis in progress
exchange(10), -- exchanging final operating
-- parameters
steadyState(11), -- normal operating mode
notResponding(12) -- DMT transceiver not responding
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports current state of the ATU-C DMT transceiver. The
current state can change dynamically. The SNMP agent
reports the state after querying the ATU-C state machine."
::= { adslAtucDmtPhysEntry 2 }
-- Report downstream path for each DMT bearer channel used by
-- ADSL Forum ATM and packet mode specifications. Data rates are
-- reported in the ADSL Line MIB. DMT bearer channel paths are
-- known to the ATU-C by observing the C-RATES1, C-RATES-RA,
-- R-RATES1, R-RATES-RA, R-RATES2 and C-RATES2 exchanges.
adslAtucDmtInterleavePath OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- Downstream interleave path is unused
as0(2), -- AS0 channel uses the interleaved path
as1(3) -- AS1 channel uses the interleaved path
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports bearer channel of downstream interleaved path."
::= { adslAtucDmtPhysEntry 3 }
adslAtucDmtFastPath OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- Downstream fast path is unused
as0(2), -- AS0 channel uses the fast path
as1(3) -- AS1 channel uses the fast path
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports bearer channel of downstream fast path."
::= { adslAtucDmtPhysEntry 4 }
-- ADSL ATU-R DMT Physical-Layer Parameters Table
adslAturDmtPhysTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdslAturDmtPhysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the adslAturPhysTable and contains physical
layer parameters for the ATU-R class devices supported by the
system."
::= { adslLineDmtMIBObjects 3 }
adslAturDmtPhysEntry OBJECT-TYPE
SYNTAX AdslAturDmtPhysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of physical-layer parameters for an ATU-R class device
supported by the system. There exists an entry for each ifEntry
with an ifType of adsl(94)."
INDEX { ifIndex }
::= { adslAturDmtPhysTable 1 }
AdslAturDmtPhysEntry ::= SEQUENCE {
adslAturDmtIssue INTEGER,
adslAturDmtState INTEGER,
adslAturDmtInterleavePath INTEGER,
adslAturDmtFastPath INTEGER
}
adslAturDmtIssue OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- unknown or other
t1413Issue1(2), -- ANSI T1.413 Issue 1
t1413Issue2(3), -- ANSI T1.413 Issue 2
t1413Issue3(4), -- ANSI T1.413 Issue 3
gdmtIssue1(5), -- ITU G.dmt Issue 1
etsiIssue1(6) -- ETSI DMT Issue 1
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports the issue number of the relevant standard that
the DMT ADSL transceiver at the ATU-R is currently
operating to. The issue number will be fixed by the
hardware and is transmitted by the ATU-R
in R-MSGS1 during initialization."
::= { adslAturDmtPhysEntry 1 }
adslAturDmtState OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- Unknown or other state
activating(2), -- activation in progress
training(3), -- transceiver training in
-- progress
analyzing(4), -- channel analysis in progress
exchange(5), -- exchanging final operating
-- parameters
steadyState(6) -- normal operating mode
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports current state of the ATU-R DMT transceiver.
The current state can change dynamically. ATU-R state
is reported by the SNMP agent at the ATU-C which infers
the state depending on the ATU-C state. When the inference
cannot be made, unknown state is returned."
::= { adslAturDmtPhysEntry 2 }
-- Report upstream path for each DMT bearer channel used by
-- ADSL Forum ATM and packet mode specifications. Data rates are
-- reported in the ADSL Line MIB. DMT bearer channel paths are
-- known to the ATU-R by observing the C-RATES1, C-RATES-RA,
-- R-RATES1, R-RATES-RA, R-RATES2 and C-RATES2 exchanges.
adslAturDmtInterleavePath OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- Upstream interleave path is unused
ls0(2), -- LS0 channel uses the interleaved path
ls1(3) -- LS1 channel uses the interleaved path
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports bearer channel of upstream interleaved path."
::= { adslAturDmtPhysEntry 3 }
adslAturDmtFastPath OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- Upstream fast path is unused
ls0(2), -- LS0 channel uses the fast path
ls1(3) -- LS1 channel uses the fast path
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports bearer channel of upstream fast path."
::= { adslAturDmtPhysEntry 4 }
-- ADSL ATU-C DMT Channel Parameters Table
adslAtucDmtChanTable OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 4 }
-- ADSL ATU-R DMT Channel Parameters Table
adslAturDmtChanTable OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 5 }
-- ADSL ATU-C DMT Physical-Layer Statistics Table
adslAtucDmtPerfDataTable OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 6 }
-- ADSL ATU-R DMT Physical-Layer Statistics Table
adslAturDmtPerfDataTable OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 7 }
-- ADSL ATU-C DMT Physical-Layer Statistics 15-Minute Interval Table
adslAtucDmtIntervalTable OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 8 }
-- ADSL ATU-R DMT Physical-Layer Statistics 15-Minute Interval Table
adslAturDmtIntervalTable OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 9 }
-- ADSL ATU-C DMT Channel Statistics Table
adslAtucDmtChanPerfDataTable OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 10 }
-- ADSL ATU-R DMT Channel Statistics Table
adslAturDmtChanPerfDataTable OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 11 }
-- ADSL ATU-C DMT Channel Statistics 15-Minute Interval Table
adslAtucDmtChanIntervalTable OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 12 }
-- ADSL ATU-R DMT Channel Statistics 15-Minute Interval Table
adslAturDmtChanIntervalTable OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 13 }
-- Configuration Profile Table
adslLineDmtConfProfileIndexNext OBJECT IDENTIFIER ::= { adslLineDmtMIBObjects 14 }
adslLineDmtConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdslLineDmtConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the adslLineConfProfileTable and contains
ADSL DMT line configuration information."
::= { adslLineDmtMIBObjects 15 }
adslLineDmtConfProfileEntry OBJECT-TYPE
SYNTAX AdslLineDmtConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A configuration profile containing ADSL DMT line configuration
information."
INDEX { IMPLIED adslLineConfProfileName }
::= { adslLineDmtConfProfileTable 1 }
AdslLineDmtConfProfileEntry ::= SEQUENCE {
adslAtucDmtConfFreqBins OCTET STRING,
adslAturDmtConfFreqBins OCTET STRING,
adslLineDmtConfMode INTEGER,
adslLineDmtConfTrellis INTEGER,
adslLineDmtConfEOC INTEGER,
adslAtucDmtConfInterleavePath INTEGER,
adslAtucDmtConfFastPath INTEGER,
adslAturDmtConfInterleavePath INTEGER,
adslAturDmtConfFastPath INTEGER
}
-- Configuration profiles define the starting point for line
-- initialization. After initialization is complete, the
-- parameters may have changed due to the negotiation and rate
-- options process. Check the adslAtucDMTPhysTable and
-- adslLineDMTTable for the final settings.
adslAtucDmtConfFreqBins OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of 32 bits to enable/disable the incoming DMT
frequency bins that the ATU-C receiver monitors. Each bit
controls one bin with the first bit of the first octet
controlling sub-carrier zero (lowest frequency bin).
A bit set to 1 disables reception of the specified sub-
carrier frequency bin end a 0 enables reception."
DEFVAL { '00000000'H }
::= { adslLineDmtConfProfileEntry 1 }
adslAturDmtConfFreqBins OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of 256 bits to enable/disable the incoming DMT frequency
bins that the ATU-R receiver should monitor after the next activation.
The mechanism to pass adslAturDMTConfFreqBins to the ATU-R is vendor
specific. Each bit controls one bin with the first bit of the first
octet controlling sub-carrier zero (lowest frequency bin). A bit set
to 1 disables reception of the specified sub-carrier frequency bin end
a 0 enables reception."
DEFVAL { '0000000000000000000000000000000000000000000000000000000000000000'H }
::= { adslLineDmtConfProfileEntry 2 }
adslLineDmtConfMode OBJECT-TYPE
SYNTAX INTEGER {
echoCancel(1), -- DMT line operates in echo
-- cancellation mode
freqDivMux(2) -- DMT line operates in frequency
-- division multiplex mode
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Defines the operational mode of the DMT ADSL transceiver.
Configured in the C-MSG1 and C-MSG-RA exchanges."
::= { adslLineDmtConfProfileEntry 3 }
adslLineDmtConfTrellis OBJECT-TYPE
SYNTAX INTEGER {
enable(1), -- DMT line operates with
-- Trellis coder enabled
disable(2) -- DMT line operates with
-- Trellis coder disabled
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enables the Trellis coder of the DMT transceiver. Configured
in the C-MSG1 and C-MSG-RA exchanges."
DEFVAL { disable }
::= { adslLineDmtConfProfileEntry 4 }
adslLineDmtConfEOC OBJECT-TYPE
SYNTAX INTEGER {
byte(1), -- eoc operates in byte
-- transaction mode
streaming(2) -- eoc allows autonomous
-- data streaming mode in
-- addition to byte
-- transaction mode
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Defines the embedded operations channel mode for the DMT
ADSL line."
DEFVAL { byte }
::= { adslLineDmtConfProfileEntry 5 }
-- Configure upstream and downstream paths for each DMT bearer
-- channel used by ADSL Forum ATM and packet mode specifications.
-- DMT bearer channel paths are fixed by the ATU-C in the
-- C-RATES1 and C-RATES-RA rate option exchanges.
adslAtucDmtConfInterleavePath OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- No downstream interleave path
as0(2), -- Downstream interleave path operates
-- over the AS0 bearer channel
as1(3) -- Downstream interleave path operates
-- over the AS1 bearer channel
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Target channel for downstream interleave data path."
::= { adslLineDmtConfProfileEntry 6 }
adslAtucDmtConfFastPath OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- No downstream fast path
as0(2), -- Downstream fast path operates over
-- the AS0 bearer channel
as1(3) -- Downstream fast path operates over
-- the AS1 bearer channel
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Target channel for downstream fast data path."
::= { adslLineDmtConfProfileEntry 7 }
adslAturDmtConfInterleavePath OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- No upstream interleave path
ls0(2), -- Upstream interleave path operates
-- over the LS0 bearer channel
ls1(3) -- Upstream interleave path operates
-- over the LS1 bearer channel
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Target channel for upstream interleave data path."
::= { adslLineDmtConfProfileEntry 8 }
adslAturDmtConfFastPath OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- No upstream fast path
ls0(2), -- Upstream fast path operates over
-- the LS0 bearer channel
ls1(3) -- Upstream fast path operates over
-- the LS1 bearer channel
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Target channel for upstream fast data path."
::= { adslLineDmtConfProfileEntry 9 }
-- Alarm Configuration Profile Table
adslLineDmtAlarmConfProfileIndexNext OBJECT IDENTIFIER ::=
{ adslLineDmtMIBObjects 16 }
adslLineDmtAlarmConfProfileTable OBJECT IDENTIFIER ::=
{ adslLineDmtMIBObjects 17 }
-- MIB Notifications Definitions
adslDmtLineMIBNotificationsPrefix OBJECT IDENTIFIER ::= { adslLineDmtMIB 2 }
adslDmtLineMIBNotifications OBJECT IDENTIFIER ::=
{ adslDmtLineMIBNotificationsPrefix 0 }
-- MIB Conformance Statements
adslLineDmtMIBConformance OBJECT IDENTIFIER ::= { adslLineDmtMIB 3 }
adslLineDmtMIBCompliances OBJECT IDENTIFIER ::= { adslLineDmtMIBConformance 1 }
adslLineDmtMIBGroups OBJECT IDENTIFIER ::= { adslLineDmtMIBConformance 2 }
-- Compliance
adslDMTLineMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which have ADSL DMT
interfaces."
MODULE -- this module
MANDATORY-GROUPS {
adslLineDmtGroup,
adslAtucDmtPhysGroup,
adslAturDmtPhysGroup,
adslLineDmtConfProfileGroup
}
::= { adslLineDmtMIBCompliances 1 }
adslLineDmtMIBAturCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which manage ADSL DMT
ATU-R interfaces."
MODULE -- this module
MANDATORY-GROUPS {
adslLineDmtGroup,
adslAturDmtPhysGroup,
adslLineDmtConfProfileGroup
}
::= { adslLineDmtMIBCompliances 2 }
-- Units of Conformance
adslLineDmtGroup OBJECT-GROUP
OBJECTS {
adslLineDmtTrellis,
adslLineDmtEOC
}
STATUS current
DESCRIPTION
"A collection of managed objects defining the attributes of an ADSL
line supportings modems using the DMT line code."
::= { adslLineDmtMIBGroups 1 }
adslAtucDmtPhysGroup OBJECT-GROUP
OBJECTS {
adslAtucDmtIssue,
adslAtucDmtState,
adslAtucDmtInterleavePath,
adslAtucDmtFastPath
}
STATUS current
DESCRIPTION
"A collection of managed objects defining the physical-layer
parameters of an ATU-C using the DMT line code."
::= { adslLineDmtMIBGroups 2 }
adslAturDmtPhysGroup OBJECT-GROUP
OBJECTS {
adslAturDmtIssue,
adslAturDmtState,
adslAturDmtInterleavePath,
adslAturDmtFastPath
}
STATUS current
DESCRIPTION
"A collection of managed objects defining the physical-layer
parameters of an ATU-R using the DMT line code."
::= { adslLineDmtMIBGroups 3 }
adslLineDmtConfProfileGroup OBJECT-GROUP
OBJECTS {
adslAtucDmtConfFreqBins,
adslAturDmtConfFreqBins,
adslLineDmtConfMode,
adslLineDmtConfTrellis,
adslLineDmtConfEOC,
adslAtucDmtConfInterleavePath,
adslAtucDmtConfFastPath,
adslAturDmtConfInterleavePath,
adslAturDmtConfFastPath
}
STATUS current
DESCRIPTION
"A collection of managed objects defining the line configuration
information associated with one or more ADSL ATU class devices
implementing the DMT line code."
::= { adslLineDmtMIBGroups 4 }
END

4031
snmp_mib_archive/ADSL-LINE-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

125
snmp_mib_archive/ADSL-TC-MIB.my 2
View File

@ -1,125 +0,0 @@
-- *****************************************************************
-- Descriptions of managed objects for ADSL DMT line interfaces.
--
-- March 1999, Patrick Gili
--
-- Copyright (c) 1999, 2000 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
-- This mib was extracted from RFC xxxx
ADSL-TC-MIB DEFINITIONS ::= BEGIN
IMPORTS
transmission,
MODULE-IDENTITY, Gauge32 FROM SNMPv2-SMI
TEXTUAL-CONVENTION FROM SNMPv2-TC;
adsltcmib MODULE-IDENTITY
LAST-UPDATED "9908190000Z"
ORGANIZATION "IETF ADSL MIB Working Group"
CONTACT-INFO
"
Gregory Bathrick
AG Communication Systems
A Subsidiary of Lucent Technologies
2500 W Utopia Rd.
Phoenix, AZ 85027 USA
Tel: +1 602-582-7679
Fax: +1 602-582-7697
E-mail: bathricg@agcs.com
Faye Ly
Copper Mountain Networks
Norcal Office
2470 Embarcadero Way
Palo Alto, CA 94303
Tel: +1 650-858-8500
Fax: +1 650-858-8085
E-Mail: faye@coppermountain.com
IETF ADSL MIB Working Group (adsl@xlist.agcs.com)
"
DESCRIPTION
"The MIB module which provides a ADSL
Line Coding Textual Convention to be used
by ADSL Lines."
-- Revision history
REVISION "9908190000Z" -- 19 August 1999, midnight
DESCRIPTION "Initial Version, published as RFC 2662"
::= { transmission 94 2 } -- adslMIB 2
AdslLineCodingType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type is used as the syntax for the ADSL
Line Code."
SYNTAX INTEGER {
other(1),-- none of the following
dmt (2), -- Discrete MultiTone
cap (3), -- Carrierless Amplitude & Phase modulation
qam (4) -- Quadrature Amplitude Modulation
}
AdslPerfCurrDayCount ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A counter associated with interface performance
measurements in a current 1-day (24 hour) measurement
interval.
The value of this counter starts at zero at the
beginning of an interval and is increased when
associated events occur, until the end of the
1-day interval. At that time the value of the
counter is stored in the previous 1-day history
interval, if available, and the current interval
counter is restarted at zero.
In the case where the agent has no valid data available
for this interval the corresponding object
instance is not available and upon a retrieval
request a corresponding error message shall be
returned to indicate that this instance does
not exist (for example, a noSuchName error for
SNMPv1 and a noSuchInstance for SNMPv2 GET
operation)."
SYNTAX Gauge32
AdslPerfPrevDayCount ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A counter associated with interface performance
measurements during the most previous 1-day (24 hour)
measurement interval. The value of this counter is
equal to the value of the current day counter at
the end of its most recent interval.
In the case where the agent has no valid data available
for this interval the corresponding object
instance is not available and upon a retrieval
request a corresponding error message shall be
returned to indicate that this instance does
not exist (for example, a noSuchName error for
SNMPv1 and a noSuchInstance for SNMPv2 GET
operation)."
SYNTAX Gauge32
AdslPerfTimeElapsed ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The number of seconds that have elapsed since
the beginning of the current measurement period.
If, for some reason, such as an adjustment in the
system's time-of-day clock, the current interval
exceeds the maximum value, the agent will return
the maximum value."
SYNTAX Gauge32
END

5475
snmp_mib_archive/ADSL2-LINE-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

728
snmp_mib_archive/ADSL2-LINE-TC-MIB.my 2
View File

@ -1,728 +0,0 @@
ADSL2-LINE-TC-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
transmission
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC;
adsl2TCMIB MODULE-IDENTITY
LAST-UPDATED "200610040000Z"
ORGANIZATION "ADSLMIB Working Group"
CONTACT-INFO
"WG-email: adslmib@ietf.org
Info: https://www1.ietf.org/mailman/listinfo/adslmib
Chair: Mike Sneed
Sand Channel Systems
Postal: P.O. Box 37324
Raleigh NC 27627-732
Email: sneedmike@hotmail.com
Phone: +1 206 600 7022
Co-Chair & Co-editor:
Menachem Dodge
ECI Telecom Ltd.
Postal: 30 Hasivim St.
Petach Tikva 49517,
Israel.
Email: mbdodge@ieee.org
Phone: +972 3 926 8421
Co-editor: Moti Morgenstern
ECI Telecom Ltd.
Postal: 30 Hasivim St.
Petach Tikva 49517,
Israel.
Email: moti.morgenstern@ecitele.com
Phone: +972 3 926 6258
Co-editor: Scott Baillie
NEC Australia
Postal: 649-655 Springvale Road,
Mulgrave, Victoria 3170,
Australia.
Email: scott.baillie@nec.com.au
Phone: +61 3 9264 3986
Co-editor: Umberto Bonollo
NEC Australia
Postal: 649-655 Springvale Road,
Mulgrave, Victoria 3170,
Australia.
Email: umberto.bonollo@nec.com.au
Phone: +61 3 9264 3385"
DESCRIPTION
"This MIB Module provides Textual Conventions to be
used by the ADSL2-LINE-MIB module for the purpose of
managing ADSL, ADSL2, and ADSL2+ lines.
Copyright (C) The Internet Society (2006). This version of
this MIB module is part of RFC 4706: see the RFC itself for
full legal notices."
REVISION "200610040000Z"
DESCRIPTION
"Initial version, published as RFC 4706."
::= { transmission 238 2 }
-- adsl2MIB 2
--
-- ----------------------------------------------
-- Textual Conventions --
-- ----------------------------------------------
Adsl2Unit ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Identifies a transceiver as being either an ATU-C or
an ATU-R. An ADSL line consists of two transceivers, an ATU-C
and an ATU-R. Attributes with this syntax reference the two
sides of a line. Specified as an INTEGER, the two values
are:
atuc(1) -- Central office ADSL terminal unit (ATU-C).
atur(2) -- Remote ADSL terminal unit (ATU-R)."
SYNTAX INTEGER {
atuc(1),
atur(2)
}
Adsl2Direction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Identifies the direction of a band as being
either upstream or downstream. Specified as an INTEGER,
the two values are:
upstream(1), and
downstream(2)."
SYNTAX INTEGER {
upstream(1),
downstream(2)
}
Adsl2TransmissionModeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A set of ADSL2 line transmission modes, with one bit
per mode. The notes (F) and (L) denote Full-Rate
and Lite/splitterless, respectively:
Bit 00 : Regional Std. (ANSI T1.413) (F)
Bit 01 : Regional Std. (ETSI DTS/TM06006) (F)
Bit 02 : G.992.1 POTS non-overlapped (F)
Bit 03 : G.992.1 POTS overlapped (F)
Bit 04 : G.992.1 ISDN non-overlapped (F)
Bit 05 : G.992.1 ISDN overlapped (F)
Bit 06 : G.992.1 TCM-ISDN non-overlapped (F)
Bit 07 : G.992.1 TCM-ISDN overlapped (F)
Bit 08 : G.992.2 POTS non-overlapped (L)
Bit 09 : G.992.2 POTS overlapped (L)
Bit 10 : G.992.2 with TCM-ISDN non-overlapped (L)
Bit 11 : G.992.2 with TCM-ISDN overlapped (L)
Bit 12 : G.992.1 TCM-ISDN symmetric (F) -- not in G.997.1
Bit 13-17: Reserved
Bit 18 : G.992.3 POTS non-overlapped (F)
Bit 19 : G.992.3 POTS overlapped (F)
Bit 20 : G.992.3 ISDN non-overlapped (F)
Bit 21 : G.992.3 ISDN overlapped (F)
Bit 22-23: Reserved
Bit 24 : G.992.4 POTS non-overlapped (L)
Bit 25 : G.992.4 POTS overlapped (L)
Bit 26-27: Reserved
Bit 28 : G.992.3 Annex I All-Digital non-overlapped (F)
Bit 29 : G.992.3 Annex I All-Digital overlapped (F)
Bit 30 : G.992.3 Annex J All-Digital non-overlapped (F)
Bit 31 : G.992.3 Annex J All-Digital overlapped (F)
Bit 32 : G.992.4 Annex I All-Digital non-overlapped (L)
Bit 33 : G.992.4 Annex I All-Digital overlapped (L)
Bit 34 : G.992.3 Annex L POTS non-overlapped, mode 1,
wide U/S (F)
Bit 35 : G.992.3 Annex L POTS non-overlapped, mode 2,
narrow U/S(F)
Bit 36 : G.992.3 Annex L POTS overlapped, mode 3,
wide U/S (F)
Bit 37 : G.992.3 Annex L POTS overlapped, mode 4,
narrow U/S (F)
Bit 38 : G.992.3 Annex M POTS non-overlapped (F)
Bit 39 : G.992.3 Annex M POTS overlapped (F)
Bit 40 : G.992.5 POTS non-overlapped (F)
Bit 41 : G.992.5 POTS overlapped (F)
Bit 42 : G.992.5 ISDN non-overlapped (F)
Bit 43 : G.992.5 ISDN overlapped (F)
Bit 44-45: Reserved
Bit 46 : G.992.5 Annex I All-Digital non-overlapped (F)
Bit 47 : G.992.5 Annex I All-Digital overlapped (F)
Bit 48 : G.992.5 Annex J All-Digital non-overlapped (F)
Bit 49 : G.992.5 Annex J All-Digital overlapped (F)
Bit 50 : G.992.5 Annex M POTS non-overlapped (F)
Bit 51 : G.992.5 Annex M POTS overlapped (F)
Bit 52-55: Reserved"
SYNTAX BITS {
ansit1413(0),
etsi(1),
g9921PotsNonOverlapped(2),
g9921PotsOverlapped(3),
g9921IsdnNonOverlapped(4),
g9921isdnOverlapped(5),
g9921tcmIsdnNonOverlapped(6),
g9921tcmIsdnOverlapped(7),
g9922potsNonOverlapped(8),
g9922potsOverlapped(9),
g9922tcmIsdnNonOverlapped(10),
g9922tcmIsdnOverlapped(11),
g9921tcmIsdnSymmetric(12),
reserved1(13),
reserved2(14),
reserved3(15),
reserved4(16),
reserved5(17),
g9923PotsNonOverlapped(18),
g9923PotsOverlapped(19),
g9923IsdnNonOverlapped(20),
g9923isdnOverlapped(21),
reserved6(22),
reserved7(23),
g9924potsNonOverlapped(24),
g9924potsOverlapped(25),
reserved8(26),
reserved9(27),
g9923AnnexIAllDigNonOverlapped(28),
g9923AnnexIAllDigOverlapped(29),
g9923AnnexJAllDigNonOverlapped(30),
g9923AnnexJAllDigOverlapped(31),
g9924AnnexIAllDigNonOverlapped(32),
g9924AnnexIAllDigOverlapped(33),
g9923AnnexLMode1NonOverlapped(34),
g9923AnnexLMode2NonOverlapped(35),
g9923AnnexLMode3Overlapped(36),
g9923AnnexLMode4Overlapped(37),
g9923AnnexMPotsNonOverlapped(38),
g9923AnnexMPotsOverlapped(39),
g9925PotsNonOverlapped(40),
g9925PotsOverlapped(41),
g9925IsdnNonOverlapped(42),
g9925isdnOverlapped(43),
reserved10(44),
reserved11(45),
g9925AnnexIAllDigNonOverlapped(46),
g9925AnnexIAllDigOverlapped(47),
g9925AnnexJAllDigNonOverlapped(48),
g9925AnnexJAllDigOverlapped(49),
g9925AnnexMPotsNonOverlapped(50),
g9925AnnexMPotsOverlapped(51),
reserved12(52),
reserved13(53),
reserved14(54),
reserved15(55)
}
Adsl2RaMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Specifies the rate adaptation behavior for the line.
The three possible behaviors are:
manual(1) - No Rate-Adaptation. The initialization
process attempts to synchronize to a
specified rate.
raInit(2) - Rate-Adaptation during initialization process
only, which attempts to synchronize to a rate
between minimum and maximum specified values.
dynamicRa(3) - Dynamic Rate-Adaptation during initialization
process as well as during SHOWTIME."
SYNTAX INTEGER {
manual(1),
raInit(2),
dynamicRa(3)
}
Adsl2InitResult ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Specifies the result of a full initialization attempt; the
six possible result values are:
noFail(0) - Successful initialization.
configError(1) - Configuration failure.
configNotFeasible(2) - Configuration details not supported.
commFail(3) - Communication failure.
noPeerAtu(4) - Peer ATU not detected.
otherCause(5) - Other initialization failure reason.
The values used are as defined in ITU-T G.997.1,
paragraph 7.5.1.3"
SYNTAX INTEGER {
noFail(0),
configError(1),
configNotFeasible(2),
commFail(3),
noPeerAtu(4),
otherCause(5)
}
Adsl2OperationModes ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The ADSL2 management model specified includes an ADSL Mode
attribute that identifies an instance of ADSL Mode-Specific
PSD Configuration object in the ADSL Line Profile. The
following classes of ADSL operating mode are defined.
The notes (F) and (L) denote Full-Rate and Lite/splitterless
respectively:
+-------+--------------------------------------------------+
| Value | ADSL operation mode description |
+-------+--------------------------------------------------+
1 - The default/generic PSD configuration. Default
configuration will be used when no other matching
mode-specific configuration can be found.
2 - ADSL family. The attributes included in the Mode-
Specific PSD Configuration are irrelevant for
ITU-T G.992.1 and G.992.2 ADSL modes. Hence, it
is possible to map those modes to this generic
class.
3-7 - Unused. Reserved for future ITU-T specification.
8 - G.992.3 POTS non-overlapped (F)
9 - G.992.3 POTS overlapped (F)
10 - G.992.3 ISDN non-overlapped (F)
11 - G.992.3 ISDN overlapped (F)
12-13 - Unused. Reserved for future ITU-T specification.
14 - G.992.4 POTS non-overlapped (L)
15 - G.992.4 POTS overlapped (L)
16-17 - Unused. Reserved for future ITU-T specification.
18 - G.992.3 Annex I All-Digital non-overlapped (F)
19 - G.992.3 Annex I All-Digital overlapped (F)
20 - G.992.3 Annex J All-Digital non-overlapped (F)
21 - G.992.3 Annex J All-Digital overlapped (F)
22 - G.992.4 Annex I All-Digital non-overlapped (L)
23 - G.992.4 Annex I All-Digital overlapped (L)
24 - G.992.3 Annex L POTS non-overlapped, mode 1,
wide U/S (F)
25 - G.992.3 Annex L POTS non-overlapped, mode 2,
narrow U/S(F)
26 - G.992.3 Annex L POTS overlapped, mode 3,
wide U/S (F)
27 - G.992.3 Annex L POTS overlapped, mode 4,
narrow U/S (F)
28 - G.992.3 Annex M POTS non-overlapped (F)
29 - G.992.3 Annex M POTS overlapped (F)
30 - G.992.5 POTS non-overlapped (F)
31 - G.992.5 POTS overlapped (F)
32 - G.992.5 ISDN non-overlapped (F)
33 - G.992.5 ISDN overlapped (F)
34-35 - Unused. Reserved for future ITU-T specification.
36 - G.992.5 Annex I All-Digital non-overlapped (F)
37 - G.992.5 Annex I All-Digital overlapped (F)
38 - G.992.5 Annex J All-Digital non-overlapped (F)
39 - G.992.5 Annex J All-Digital overlapped (F)
40 - G.992.5 Annex M POTS non-overlapped (F)
41 - G.992.5 Annex M POTS overlapped (F)"
SYNTAX INTEGER {
defMode(1),
adsl(2),
g9923PotsNonOverlapped(8),
g9923PotsOverlapped(9),
g9923IsdnNonOverlapped(10),
g9923isdnOverlapped(11),
g9924potsNonOverlapped(14),
g9924potsOverlapped(15),
g9923AnnexIAllDigNonOverlapped(18),
g9923AnnexIAllDigOverlapped(19),
g9923AnnexJAllDigNonOverlapped(20),
g9923AnnexJAllDigOverlapped(21),
g9924AnnexIAllDigNonOverlapped(22),
g9924AnnexIAllDigOverlapped(23),
g9923AnnexLMode1NonOverlapped(24),
g9923AnnexLMode2NonOverlapped(25),
g9923AnnexLMode3Overlapped(26),
g9923AnnexLMode4Overlapped(27),
g9923AnnexMPotsNonOverlapped(28),
g9923AnnexMPotsOverlapped(29),
g9925PotsNonOverlapped(30),
g9925PotsOverlapped(31),
g9925IsdnNonOverlapped(32),
g9925isdnOverlapped(33),
g9925AnnexIAllDigNonOverlapped(36),
g9925AnnexIAllDigOverlapped(37),
g9925AnnexJAllDigNonOverlapped(38),
g9925AnnexJAllDigOverlapped(39),
g9925AnnexMPotsNonOverlapped(40),
g9925AnnexMPotsOverlapped(41)
}
Adsl2PowerMngState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Attributes with this syntax uniquely identify each power
management state defined for the ADSL/ADSL2 or ADSL2+ link.
The possible values are:
l0(1) - L0 - Full power management state.
l1(2) - L1 - Low power management state (for G.992.2).
l2(3) - L2 - Low power management state (for G.992.3,
G.992.4, and G.992.5).
l3(4) - L3 - Idle power management state."
SYNTAX INTEGER {
l0(1),
l1(2),
l2(3),
l3(4)
}
Adsl2ConfPmsForce ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Attributes with this syntax are configuration parameters
that reference the desired power management state for the
ADSL/ADSL2 or ADSL2+ link:
l3toL0(0) - Perform a transition from L3 to L0
(Full power management state).
l0toL2(2) - Perform a transition from L0 to L2
(Low power management state).
l0orL2toL3(3) - Perform a transition into L3 (Idle
power management state).
The values used are as defined in ITU-T G.997.1,
paragraph 7.3.1.1.3"
SYNTAX INTEGER {
l3toL0(0),
l0toL2(2),
l0orL2toL3(3)
}
Adsl2LConfProfPmMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Attributes with this syntax are configuration parameters
that reference the power modes/states into which the ATU-C or
ATU-R may autonomously transit.
It is a BITS structure that allows control of the following
transit options:
allowTransitionsToIdle(0) - XTU may autonomously transit
to idle (L3) state.
allowTransitionsToLowPower(1) - XTU may autonomously transit
to low-power (L2) state."
SYNTAX BITS {
allowTransitionsToIdle(0),
allowTransitionsToLowPower(1)
}
Adsl2LineLdsf ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Attributes with this syntax are configuration parameters
that control the Loop Diagnostic mode for the ADSL/ADSL2 or
ADSL2+ link. The possible values are:
inhibit(0) - Inhibit Loop Diagnostic mode.
force(1) - Force/Initiate Loop Diagnostic mode.
The values used are as defined in ITU-T G.997.1,
paragraph 7.3.1.1.8"
SYNTAX INTEGER {
inhibit(0),
force(1)
}
Adsl2LdsfResult ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Possible failure reasons associated with performing
a Dual Ended Loop Test (DELT) on a DSL line.
Possible values are:
none(1) - The default value in case LDSF was never
requested for the associated line.
success(2) - The recent command completed
successfully.
inProgress(3) - The Loop Diagnostics process is in
progress.
unsupported(4) - The NE or the line card doesn't support
LDSF.
cannotRun(5) - The NE cannot initiate the command, due
to a nonspecific reason.
aborted(6) - The Loop Diagnostics process aborted.
failed(7) - The Loop Diagnostics process failed.
illegalMode(8) - The NE cannot initiate the command, due
to the specific mode of the relevant
line.
adminUp(9) - The NE cannot initiate the command, as
the relevant line is administratively
'Up'.
tableFull(10) - The NE cannot initiate the command, due
to reaching the maximum number of rows
in the results table.
noResources(11) - The NE cannot initiate the command, due
to lack of internal memory resources."
SYNTAX INTEGER {
none(1),
success(2),
inProgress(3),
unsupported(4),
cannotRun(5),
aborted(6),
failed(7),
illegalMode(8),
adminUp(9),
tableFull(10),
noResources(11)
}
Adsl2SymbolProtection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Attributes with this syntax are configuration parameters
that reference the minimum-length impulse noise protection
(INP) in terms of number of symbols. The possible values are:
noProtection (i.e., INP not required), halfSymbol (i.e., INP
length is 1/2 symbol), and 1-16 symbols in steps of 1 symbol."
SYNTAX INTEGER {
noProtection(1),
halfSymbol(2),
singleSymbol(3),
twoSymbols(4),
threeSymbols(5),
fourSymbols(6),
fiveSymbols(7),
sixSymbols(8),
sevenSymbols(9),
eightSymbols(10),
nineSymbols(11),
tenSymbols(12),
elevenSymbols(13),
twelveSymbols(14),
thirteeSymbols(15),
fourteenSymbols(16),
fifteenSymbols(17),
sixteenSymbols(18)
}
Adsl2MaxBer ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Attributes with this syntax are configuration parameters
that reference the maximum Bit Error Rate (BER).
The possible values are:
eminus3(1) - Maximum BER=E^-3
eminus5(2) - Maximum BER=E^-5
eminus7(3) - Maximum BER=E^-7"
SYNTAX INTEGER {
eminus3(1),
eminus5(2),
eminus7(3)
}
Adsl2ScMaskDs ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each one of the 512 bits in this OCTET
STRING array represents the corresponding bin
in the downstream direction. A value of one
indicates that the bin is not in use."
SYNTAX OCTET STRING (SIZE (0..64))
Adsl2ScMaskUs ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each one of the 64 bits in this OCTET
STRING array represents the corresponding bin
in the upstream direction. A value of one
indicates that the bin is not in use."
SYNTAX OCTET STRING (SIZE (0..8))
Adsl2RfiDs ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each one of the 512 bits in this OCTET
STRING array represents the corresponding bin
in the downstream direction. A value of one
indicates that the bin is part of a notch
filter."
SYNTAX OCTET STRING (SIZE (0..64))
Adsl2PsdMaskDs ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This is a structure that represents up to
32 PSD Mask breakpoints.
Each breakpoint occupies 3 octets: The first
two octets hold the index of the sub-carrier
associated with the breakpoint. The third octet
holds the PSD reduction at the breakpoint from 0
(0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units of
0.5 dBm/Hz."
SYNTAX OCTET STRING (SIZE (0..96))
Adsl2PsdMaskUs ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This is a structure that represents up to
4 PSD Mask breakpoints.
Each breakpoint occupies 3 octets: The first
two octets hold the index of the sub-carrier
associated with the breakpoint. The third octet
holds the PSD reduction at the breakpoint from 0
(0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units of
0.5 dBm/Hz."
SYNTAX OCTET STRING (SIZE (0..12))
Adsl2Tssi ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This is a structure that represents up to
32 transmit spectrum shaping (TSSi) breakpoints.
Each breakpoint occupies 3 octets: The first
two octets hold the index of the sub-carrier
associated with the breakpoint. The third octet
holds the shaping parameter at the breakpoint. It
is a value from 0 to 127 (units of -0.5 dB). The
special value 127 indicates that the sub-carrier
is not transmitted."
SYNTAX OCTET STRING (SIZE (0..96))
Adsl2LastTransmittedState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This parameter represents the last successfully
transmitted initialization state in the last full
initialization performed on the line. States are
per the specific xDSL technology and are numbered
from 0 (if G.994.1 is used) or 1 (if G.994.1 is
not used) up to Showtime."
SYNTAX INTEGER {
atucG9941(0),
atucQuiet1(1),
atucComb1(2),
atucQuiet2(3),
atucComb2(4),
atucIcomb1(5),
atucLineprob(6),
atucQuiet3(7),
atucComb3(8),
atucIComb2(9),
atucMsgfmt(10),
atucMsgpcb(11),
atucQuiet4(12),
atucReverb1(13),
atucTref1(14),
atucReverb2(15),
atucEct(16),
atucReverb3(17),
atucTref2(18),
atucReverb4(19),
atucSegue1(20),
atucMsg1(21),
atucReverb5(22),
atucSegue2(23),
atucMedley(24),
atucExchmarker(25),
atucMsg2(26),
atucReverb6(27),
atucSegue3(28),
atucParams(29),
atucReverb7(30),
atucSegue4(31),
atucShowtime(32),
aturG9941(100),
aturQuiet1(101),
aturComb1(102),
aturQuiet2(103),
aturComb2(104),
aturIcomb1(105),
aturLineprob(106),
aturQuiet3(107),
aturComb3(108),
aturIcomb2(109),
aturMsgfmt(110),
aturMsgpcb(111),
aturReverb1(112),
aturQuiet4(113),
aturReverb2(114),
aturQuiet5(115),
aturReverb3(116),
aturEct(117),
aturReverb4(118),
aturSegue1(119),
aturReverb5(120),
aturSegue2(121),
aturMsg1(122),
aturMedley(123),
aturExchmarker(124),
aturMsg2(125),
aturReverb6(126),
aturSegue3(127),
aturParams(128),
aturReverb7(129),
aturSegue4(130),
aturShowtime(131)
}
Adsl2LineStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Attributes with this syntax are status parameters
that reflect the failure status for a given endpoint of
ADSL/ADSL2 or ADSL2+ link.
This BITS structure can report the following failures:
noDefect(0) - This bit position positively reports
that no defect or failure exists.
lossOfFrame(1) - Loss of frame synchronization.
lossOfSignal(2) - Loss of signal.
lossOfPower(3) - Loss of power. Usually this failure may
be reported for ATU-Rs only.
initFailure(4) - Recent initialization process failed.
Never active on ATU-R."
SYNTAX BITS {
noDefect(0),
lossOfFrame(1),
lossOfSignal(2),
lossOfPower(3),
initFailure(4)
}
Adsl2ChAtmStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Attributes with this syntax are status parameters that
reflect the failure status for Transmission Convergence (TC)
layer of a given ATM interface (data path over an ADSL/ADSL2
or ADSL2+ link).
This BITS structure can report the following failures:
noDefect(0) - This bit position positively
reports that no defect or failure
exists.
noCellDelineation(1) - The link was successfully
initialized, but cell delineation
was never acquired on the
associated ATM data path.
lossOfCellDelineation(2) - Loss of cell delineation on the
associated ATM data path."
SYNTAX BITS {
noDefect(0),
noCellDelineation(1),
lossOfCellDelineation(2)
}
Adsl2ChPtmStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Attributes with this syntax are status parameters that
reflect the failure status for a given PTM interface (packet
data path over an ADSL/ADSL2 or ADSL2+ link).
This BITS structure can report the following failures:
noDefect(0) - This bit position positively
reports that no defect or failure exists.
outOfSync(1) - Out of synchronization."
SYNTAX BITS {
noDefect(0),
outOfSync(1)
}
END

52
snmp_mib_archive/AIRESPACE-REF-MIB.my 2
View File

@ -1,52 +0,0 @@
-- **********************************************************
-- Airespace Reference MIB
-- Copyright 2005 Cisco Systems, Inc. All rights reserved.
-- This SNMP Management Information Specification
-- embodies Cisco's confidential and proprietary
-- intellectual property. Cisco retains all title
-- and ownership in the Specification including any revisions.
-- This Specification is supplied "AS IS", Cisco
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.
-- Status: Release
-- Version: 4.0
-- Internal Source Code Version:1.268
-- Date: 01 Jan 2006
-- **********************************************************
AIRESPACE-REF-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
enterprises
FROM SNMPv2-SMI;
airespace MODULE-IDENTITY
LAST-UPDATED "200512190000Z" -- December 19, 2005
ORGANIZATION "Airespace, Inc."
CONTACT-INFO
" Cisco Systems,
Customer Service
Postal: 170 West Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
Email: cs-wnbu-snmp@cisco.com"
DESCRIPTION
"The Structure of Management Information for the
Airespace enterprise."
REVISION "200512190000Z" -- December 19, 2005
DESCRIPTION
"Initial version of this MIB module."
::= { enterprises 14179 } -- assigned by IANA
END

4068
snmp_mib_archive/AIRESPACE-SWITCHING-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

17105
snmp_mib_archive/AIRESPACE-WIRELESS-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

497
snmp_mib_archive/ALTIGA-ADDRESS-STATS-MIB.my 2
View File

@ -1,497 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-ADDRESS-STATS-MIB.my: The Altiga Address Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002, 2004, 2005 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-ADDRESS-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, IpAddress
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsAddress, alAddressGroup
FROM ALTIGA-MIB
alAddressMibModule
FROM ALTIGA-GLOBAL-REG;
altigaAddressStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200501250000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga Address Statistics MIB models counters and objects
that are of management interest for address assignment.
Acronyms
The following acronyms are used in this document:
MIB: Management Information Base
"
REVISION "200501250000Z"
DESCRIPTION
"Added tables alAddressStatsPoolTable,
alAddressStatsPoolGroupTable.
Added object alAddressStatsHeldAddresses,
alAddressStatsGrpHeldAddresses,
alAddressStatsHeldPoolId,
alAddressStatsHeldAddrIndex,
alAddressStatsHeldAddress,
alAddressStatsHeldTimeLeft,
alAddressStatsHeldReason,
alAddressStatsGrpHeldId,
alAddressStatsGrpHeldPoolId,
alAddressStatsGrpHeldAddrIndex,
alAddressStatsGrpHeldAddress,
alAddressStatsGrpHeldTimeLeft,
alAddressStatsGrpHeldReason."
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alAddressMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alAddressStatsGlobal OBJECT IDENTIFIER ::= { alStatsAddress 1 }
IPAddressHeldReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Definition of reason an IP Address is held for.
delayReuse - held due to address re-use delay feature
foundInUse - held because the address is found to
be used"
SYNTAX INTEGER {
delayReuse(1),
foundInUse(2)
}
alAddressStatsPoolTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlAddressStatsPoolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of trap destinations."
::= { alStatsAddress 2}
alAddressStatsPoolEntry OBJECT-TYPE
SYNTAX AlAddressStatsPoolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alAddressStatsPoolTable."
INDEX { alAddressStatsPoolId }
::= { alAddressStatsPoolTable 1 }
AlAddressStatsPoolEntry ::= SEQUENCE {
alAddressStatsPoolId Integer32,
alAddressStatsTotalPoolAddresses Integer32,
alAddressStatsCurrAllocAddresses Gauge32,
alAddressStatsCurrAvailAddresses Gauge32,
alAddressStatsMaxAddressesAssigned Gauge32,
alAddressStatsHeldAddresses Gauge32
}
alAddressStatsPoolId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Global Address Pool ID for this entry."
::= { alAddressStatsPoolEntry 1 }
alAddressStatsTotalPoolAddresses OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of legal addresses defined in pool.
This does not include Network and Broadcast addresses."
::= { alAddressStatsPoolEntry 2 }
alAddressStatsCurrAllocAddresses OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of addresses currently assigned."
::= { alAddressStatsPoolEntry 3 }
alAddressStatsCurrAvailAddresses OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of addresses currently available."
::= { alAddressStatsPoolEntry 4 }
alAddressStatsMaxAddressesAssigned OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of addresses currently available."
::= { alAddressStatsPoolEntry 5 }
alAddressStatsHeldAddresses OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of addresses currently held. This reflects
the number of entries in alAddressStatsHeldTable."
::= { alAddressStatsPoolEntry 6 }
alAddressStatsPoolGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlAddressStatsPoolGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of trap destinations."
::= { alStatsAddress 3}
alAddressStatsPoolGroupEntry OBJECT-TYPE
SYNTAX AlAddressStatsPoolGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alAddressStatsPoolGroupTable."
INDEX { alAddressStatsGrpId, alAddressStatsGrpPoolId }
::= { alAddressStatsPoolGroupTable 1 }
AlAddressStatsPoolGroupEntry ::= SEQUENCE {
alAddressStatsGrpId Integer32,
alAddressStatsGrpPoolId Integer32,
alAddressStatsGrpTotalPoolAddresses Integer32,
alAddressStatsGrpCurrAllocAddresses Gauge32,
alAddressStatsGrpCurrAvailAddresses Gauge32,
alAddressStatsGrpMaxAddressesAssigned Gauge32,
alAddressStatsGrpHeldAddresses Gauge32
}
alAddressStatsGrpId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Group ID for this entry."
::= { alAddressStatsPoolGroupEntry 1 }
alAddressStatsGrpPoolId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Group Pool ID for this entry."
::= { alAddressStatsPoolGroupEntry 2 }
alAddressStatsGrpTotalPoolAddresses OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of legal addresses defined in pool.
This does not include Network and Broadcast addresses."
::= { alAddressStatsPoolGroupEntry 3 }
alAddressStatsGrpCurrAllocAddresses OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of addresses currently assigned."
::= { alAddressStatsPoolGroupEntry 4 }
alAddressStatsGrpCurrAvailAddresses OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of addresses currently available."
::= { alAddressStatsPoolGroupEntry 5 }
alAddressStatsGrpMaxAddressesAssigned OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of addresses currently available."
::= { alAddressStatsPoolGroupEntry 6 }
alAddressStatsGrpHeldAddresses OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of addresses currently held. This reflects
the number of entries in alAddressStatsGrpHeldTable."
::= { alAddressStatsPoolGroupEntry 7 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Global Address Held Stats
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alAddressStatsHeldTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlAddressStatsHeldEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of held IP addresses in the Base group.
The IP addresses in this table are not available
for use.
When an IP address is released from use and if
the re-use delay feature is enabled, the IP address is added
into this table for a configured time period before it can
be used again. An IP address that was discovered to be used
by an external device is also added into this table
for configured time period also. When the timer
expires, the IP address is removed from this table."
::= { alStatsAddress 4}
alAddressStatsHeldEntry OBJECT-TYPE
SYNTAX AlAddressStatsHeldEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alAddressStatsHeldTable."
INDEX { alAddressStatsHeldPoolId, alAddressStatsHeldAddrIndex }
::= { alAddressStatsHeldTable 1 }
AlAddressStatsHeldEntry ::= SEQUENCE {
alAddressStatsHeldPoolId Integer32,
alAddressStatsHeldAddrIndex Integer32,
alAddressStatsHeldAddress IpAddress,
alAddressStatsHeldTimeLeft Integer32,
alAddressStatsHeldReason IPAddressHeldReason
}
alAddressStatsHeldPoolId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Global Address Pool ID for this entry."
::= { alAddressStatsHeldEntry 1 }
alAddressStatsHeldAddrIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address index for this entry."
::= { alAddressStatsHeldEntry 2 }
alAddressStatsHeldAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP Address currently being held; not available for assignment."
::= { alAddressStatsHeldEntry 3 }
alAddressStatsHeldTimeLeft OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of time left, in second, before the address
can be assigned."
::= { alAddressStatsHeldEntry 4 }
alAddressStatsHeldReason OBJECT-TYPE
SYNTAX IPAddressHeldReason
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the reason for being held."
::= { alAddressStatsHeldEntry 5 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Group Address Held Stats
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alAddressStatsGrpHeldTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlAddressStatsGrpHeldEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of held IP addresses in the user group.
The IP addresses in this table are not available
for use.
When an IP address is released from use and if
the re-use delay feature is enabled, the IP address is added
into this table for a configured time period before it can
be used again. An IP address that was discovered to be used
by an external device is also added into this table
for configured time period also. When the timer
expires, the IP address is removed from this table."
::= { alStatsAddress 5}
alAddressStatsGrpHeldEntry OBJECT-TYPE
SYNTAX AlAddressStatsGrpHeldEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alAddressStatsGrpHeldTable."
INDEX { alAddressStatsGrpHeldId, alAddressStatsGrpHeldPoolId,
alAddressStatsGrpHeldAddrIndex }
::= { alAddressStatsGrpHeldTable 1 }
AlAddressStatsGrpHeldEntry ::= SEQUENCE {
alAddressStatsGrpHeldId Integer32,
alAddressStatsGrpHeldPoolId Integer32,
alAddressStatsGrpHeldAddrIndex Integer32,
alAddressStatsGrpHeldAddress IpAddress,
alAddressStatsGrpHeldTimeLeft Integer32,
alAddressStatsGrpHeldReason IPAddressHeldReason
}
alAddressStatsGrpHeldId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Group ID for this entry."
::= { alAddressStatsGrpHeldEntry 1 }
alAddressStatsGrpHeldPoolId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Global Address Pool ID for this entry."
::= { alAddressStatsGrpHeldEntry 2 }
alAddressStatsGrpHeldAddrIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address index for this entry."
::= { alAddressStatsGrpHeldEntry 3 }
alAddressStatsGrpHeldAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP Address currently being held; not available for assignment."
::= { alAddressStatsGrpHeldEntry 4 }
alAddressStatsGrpHeldTimeLeft OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of time left, in second, before the address
can be assigned."
::= { alAddressStatsGrpHeldEntry 5 }
alAddressStatsGrpHeldReason OBJECT-TYPE
SYNTAX IPAddressHeldReason
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the reason for being held."
::= { alAddressStatsGrpHeldEntry 6 }
altigaAddressStatsMibConformance OBJECT IDENTIFIER
::= { altigaAddressStatsMibModule 1 }
altigaAddressStatsMibCompliances OBJECT IDENTIFIER
::= { altigaAddressStatsMibConformance 1 }
altigaAddressStatsMibCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for agents which
implement the Altiga Address Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaAddressStatsGroup
}
::= { altigaAddressStatsMibCompliances 1 }
altigaAddressStatsMibComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga Address Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaAddressStatsGroup,
altigaAddressStatsGroupSup1
}
::= { altigaAddressStatsMibCompliances 2 }
altigaAddressStatsGroup OBJECT-GROUP
OBJECTS
{
alAddressStatsPoolId,
alAddressStatsTotalPoolAddresses,
alAddressStatsCurrAllocAddresses,
alAddressStatsCurrAvailAddresses,
alAddressStatsMaxAddressesAssigned,
alAddressStatsGrpId,
alAddressStatsGrpPoolId,
alAddressStatsGrpTotalPoolAddresses,
alAddressStatsGrpCurrAllocAddresses,
alAddressStatsGrpCurrAvailAddresses,
alAddressStatsGrpMaxAddressesAssigned
}
STATUS current
DESCRIPTION
"The objects for address statistics."
::= { alAddressGroup 2 }
altigaAddressStatsGroupSup1 OBJECT-GROUP
OBJECTS
{
alAddressStatsHeldAddresses,
alAddressStatsGrpHeldAddresses,
alAddressStatsHeldPoolId,
alAddressStatsHeldAddrIndex,
alAddressStatsHeldAddress,
alAddressStatsHeldTimeLeft,
alAddressStatsHeldReason,
alAddressStatsGrpHeldId,
alAddressStatsGrpHeldPoolId,
alAddressStatsGrpHeldAddrIndex,
alAddressStatsGrpHeldAddress,
alAddressStatsGrpHeldTimeLeft,
alAddressStatsGrpHeldReason
}
STATUS current
DESCRIPTION
"The objects for address statistics."
::= { alAddressGroup 3 }
END

237
snmp_mib_archive/ALTIGA-BMGT-STATS-MIB.my 2
View File

@ -1,237 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-BMGT-STATS-MIB.my: Altiga Bandwidth Limiting/Guarantee and Policy Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-BMGT-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Unsigned32
FROM SNMPv2-SMI
RowStatus
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alBwMgmtGroup, alStatsBwMgmt
FROM ALTIGA-MIB
alBwMgmtMibModule
FROM ALTIGA-GLOBAL-REG;
altigaBwMgmMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga Bandwidth Limiting/Guarantee and Policy Statistics MIB
models counters and objects that are of management interest for bandwidth
management.
Acronyms
The following acronyms are used in this document:
BW: Bandwidth
MIB: Management Information Base
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alBwMgmtMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alBwMgmtStatsGlobal OBJECT IDENTIFIER ::= { alStatsBwMgmt 1 }
-- Any global stuff here...
alBwMgmtStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlBwMgmtStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of BW Management status entries."
::= { alStatsBwMgmt 2 }
alBwMgmtStatEntry OBJECT-TYPE
SYNTAX AlBwMgmtStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of bandwidth mgmt status objects on this
interface."
INDEX { alBwMgmtStatIntfId }
::= { alBwMgmtStatTable 1 }
AlBwMgmtStatEntry ::=
SEQUENCE {
alBwMgmtStatRowStatus RowStatus,
alBwMgmtStatIntfId INTEGER,
alBwMgmtStatGrpId INTEGER,
alBwMgmtStatInConformedRate Unsigned32,
alBwMgmtStatInDroppedRate Unsigned32,
alBwMgmtStatInConformedBytes Counter32,
alBwMgmtStatInDroppedBytes Counter32,
alBwMgmtStatOutConformedRate Unsigned32,
alBwMgmtStatOutDroppedRate Unsigned32,
alBwMgmtStatOutConformedBytes Counter32,
alBwMgmtStatOutDroppedBytes Counter32
}
alBwMgmtStatRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this row."
::= { alBwMgmtStatEntry 1 }
alBwMgmtStatIntfId OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BwPolicy identifier used as the index of this row."
::= { alBwMgmtStatEntry 2 }
alBwMgmtStatGrpId OBJECT-TYPE
SYNTAX INTEGER (0..100000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BwPolicy identifier used as the index of this row."
::= { alBwMgmtStatEntry 3 }
alBwMgmtStatInConformedRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kbytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of packets permitted by this rate limit."
::= { alBwMgmtStatEntry 4 }
alBwMgmtStatInDroppedRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kbytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of packets which exceeded this rate limit."
::= { alBwMgmtStatEntry 5 }
alBwMgmtStatInConformedBytes OBJECT-TYPE
SYNTAX Counter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of bytes which exceeded this rate limit."
::= { alBwMgmtStatEntry 6 }
alBwMgmtStatInDroppedBytes OBJECT-TYPE
SYNTAX Counter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of bytes which exceeded this rate limit."
::= { alBwMgmtStatEntry 7 }
alBwMgmtStatOutConformedRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kbytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of packets permitted by this rate limit."
::= { alBwMgmtStatEntry 8 }
alBwMgmtStatOutDroppedRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kbytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of packets which exceeded this rate limit."
::= { alBwMgmtStatEntry 9 }
alBwMgmtStatOutConformedBytes OBJECT-TYPE
SYNTAX Counter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of bytes which exceeded this rate limit."
::= { alBwMgmtStatEntry 10 }
alBwMgmtStatOutDroppedBytes OBJECT-TYPE
SYNTAX Counter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of bytes which exceeded this rate limit."
::= { alBwMgmtStatEntry 11 }
altigaBwMgmMibConformance OBJECT IDENTIFIER ::= { altigaBwMgmMibModule 1 }
altigaBwMgmMibCompliances OBJECT IDENTIFIER ::= { altigaBwMgmMibConformance 1 }
altigaBwMgmMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Bandwidth Limiting/Guarantee and Policy Statistics MIB."
MODULE
MANDATORY-GROUPS {
alBwMgmtStatsGroup
}
::= { altigaBwMgmMibCompliances 1 }
alBwMgmtStatsGroup OBJECT-GROUP
OBJECTS {
alBwMgmtStatRowStatus,
alBwMgmtStatIntfId,
alBwMgmtStatGrpId,
alBwMgmtStatInConformedRate,
alBwMgmtStatInDroppedRate,
alBwMgmtStatInConformedBytes,
alBwMgmtStatInDroppedBytes,
alBwMgmtStatOutConformedRate,
alBwMgmtStatOutDroppedRate,
alBwMgmtStatOutConformedBytes,
alBwMgmtStatOutDroppedBytes
}
STATUS current
DESCRIPTION
"A collection of objects providing BW Management monitoring."
::= { alBwMgmtGroup 2 }
END

265
snmp_mib_archive/ALTIGA-CAP.my 2
View File

@ -1,265 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-CAP.my: The Altiga Networks capabilities MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-CAP DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY
FROM SNMPv2-SMI
AGENT-CAPABILITIES
FROM SNMPv2-CONF
altigaCaps, alCapModule
FROM ALTIGA-GLOBAL-REG;
altigaCapModule MODULE-IDENTITY
LAST-UPDATED "200209091200Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga Networks capabilities MIB models counters and
objects that are of management interest for networks
capabilities.
Acronyms
The following acronyms are used in this document:
DHCP: Dynamic Host Configuration Protocol
DNS: Domain Name Service
FTP: File Transfer Protocol
HTTP: HyperText Transfer Protocol
ICMP: Internet Control Message Protocol
IP: Internet Protocol
L2TP: Layer-2 Tunneling Protocol
MIB: Management Information Base
PPP: Point-to-Point Protocol
PPTP: Point-to-Point Tunneling Protocol
SEP: Scalable Encryption Processor
SNMP: Simple Network Management Protocol
SSL: Secure Sockets Layer
TCP: Transmission Control Protocol
UDP: User Datagram Protocol
"
REVISION "200209091200Z"
DESCRIPTION
"Updated MIB to comply to Cisco MIB Police standards.
Added missing supports for new Altiga MIBs.
"
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alCapModule 1 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
altigaBasicAgent AGENT-CAPABILITIES
PRODUCT-RELEASE "Altiga Agent v1.0"
STATUS obsolete
DESCRIPTION "Altiga SNMP Agent"
SUPPORTS SNMPv2-MIB
INCLUDES { snmpGroup, snmpSetGroup, systemGroup,
snmpBasicNotificationsGroup }
SUPPORTS IP-MIB
INCLUDES { ipGroup, icmpGroup }
SUPPORTS UDP-MIB
INCLUDES { udpGroup }
SUPPORTS ALTIGA-VERSION-STATS-MIB
INCLUDES { altigaVersionStatsGroup }
SUPPORTS ALTIGA-PPTP-STATS-MIB
INCLUDES { altigaPptpStatsGroup }
SUPPORTS ALTIGA-PPP-STATS-MIB
INCLUDES { altigaPppStatsGroup }
SUPPORTS ALTIGA-HTTP-STATS-MIB
INCLUDES { altigaHttpStatsGroup }
SUPPORTS ALTIGA-L2TP-STATS-MIB
INCLUDES { altigaL2tpStatsGroup }
SUPPORTS ALTIGA-SESSION-STATS-MIB
INCLUDES { altigaSessionStatsGroup }
SUPPORTS ALTIGA-TELNET-STATS-MIB
INCLUDES { altigaTelnetStatsGroup }
SUPPORTS ALTIGA-DHCP-STATS-MIB
INCLUDES { altigaDhcpStatsGroup }
SUPPORTS ALTIGA-DNS-STATS-MIB
INCLUDES { altigaDnsStatsGroup }
SUPPORTS ALTIGA-CERT-STATS-MIB
INCLUDES { altigaCertStatsGroup }
SUPPORTS ALTIGA-SEP-STATS-MIB
INCLUDES { altigaSepStatsGroup }
SUPPORTS ALTIGA-SYNC-STATS-MIB
INCLUDES { altigaSyncStatsGroup }
SUPPORTS ALTIGA-T1E1-STATS-MIB
INCLUDES { altigaT1E1StatsGroup }
SUPPORTS ALTIGA-SSL-STATS-MIB
INCLUDES { altigaSslStatsGroup }
SUPPORTS ALTIGA-EVENT-STATS-MIB
INCLUDES { altigaEventStatsGroup }
SUPPORTS ALTIGA-FILTER-STATS-MIB
INCLUDES { altigaFilterStatsGroup }
SUPPORTS ALTIGA-FTP-STATS-MIB
INCLUDES { altigaFtpStatsGroup }
SUPPORTS ALTIGA-GENERAL-STATS-MIB
INCLUDES { altigaGeneralStatsGroup }
SUPPORTS ALTIGA-HARDWARE-STATS-MIB
INCLUDES { altigaHardwareStatsGroup }
::= { altigaCaps 1 }
altigaBasicAgentRev1 AGENT-CAPABILITIES
PRODUCT-RELEASE "Altiga Agent v1.1"
STATUS current
DESCRIPTION "Altiga SNMP Agent"
SUPPORTS SNMPv2-MIB
INCLUDES { snmpGroup, snmpSetGroup, systemGroup,
snmpBasicNotificationsGroup }
SUPPORTS ALTIGA-ADDRESS-STATS-MIB
INCLUDES { altigaAddressStatsGroup }
SUPPORTS ALTIGA-CERT-STATS-MIB
INCLUDES { altigaCertStatsGroup }
SUPPORTS ALTIGA-DHCP-SERVER-STATS-MIB
INCLUDES { altigaDhcpServerStatsGroup }
SUPPORTS ALTIGA-DHCP-STATS-MIB
INCLUDES { altigaDhcpStatsGroup }
SUPPORTS ALTIGA-DNS-STATS-MIB
INCLUDES { altigaDnsStatsGroup }
SUPPORTS ALTIGA-EVENT-STATS-MIB
INCLUDES { altigaEventStatsGroup }
SUPPORTS ALTIGA-FILTER-STATS-MIB
INCLUDES { altigaFilterStatsGroup }
SUPPORTS ALTIGA-FTP-STATS-MIB
INCLUDES { altigaFtpStatsGroup }
SUPPORTS ALTIGA-GENERAL-STATS-MIB
INCLUDES { altigaGeneralStatsGroup }
SUPPORTS ALTIGA-HARDWARE-STATS-MIB
INCLUDES { altigaHardwareStatsGroup }
SUPPORTS ALTIGA-HTTP-STATS-MIB
INCLUDES { altigaHttpStatsGroup }
SUPPORTS ALTIGA-IP-STATS-MIB
INCLUDES { altigaIpStatsGroup }
SUPPORTS ALTIGA-L2TP-STATS-MIB
INCLUDES { altigaL2tpStatsGroup }
SUPPORTS ALTIGA-LBSSF-STATS-MIB
INCLUDES { altigaStatsLBSSFGroup }
SUPPORTS ALTIGA-MULTILINK-STATS-MIB
INCLUDES { altigaMultiLinkStatsGroup }
SUPPORTS ALTIGA-NAT-STATS-MIB
INCLUDES { altigaNatStatsGroup }
SUPPORTS ALTIGA-PPP-STATS-MIB
INCLUDES { altigaPppStatsGroup }
SUPPORTS ALTIGA-PPPOE-STATS-MIB
INCLUDES { altigaPPPoEStatsGroup }
SUPPORTS ALTIGA-PPTP-STATS-MIB
INCLUDES { altigaPptpStatsGroup }
SUPPORTS ALTIGA-SDI-ACE-STATS-MIB
INCLUDES { altigaACEServerGroup }
SUPPORTS ALTIGA-SEP-STATS-MIB
INCLUDES { altigaSepStatsGroup }
SUPPORTS ALTIGA-SESSION-STATS-MIB
INCLUDES { altigaSessionStatsGroup }
SUPPORTS ALTIGA-SSH-STATS-MIB
INCLUDES { altigaSshStatsGroup }
SUPPORTS ALTIGA-SSL-STATS-MIB
INCLUDES { altigaSslStatsGroup }
SUPPORTS ALTIGA-SYNC-STATS-MIB
INCLUDES { altigaSyncStatsGroup }
SUPPORTS ALTIGA-T1E1-STATS-MIB
INCLUDES { altigaT1E1StatsGroup }
SUPPORTS ALTIGA-TELNET-STATS-MIB
INCLUDES { altigaTelnetStatsGroup }
SUPPORTS ALTIGA-VERSION-STATS-MIB
INCLUDES { altigaVersionStatsGroup }
SUPPORTS IP-MIB
INCLUDES { ipGroup, icmpGroup }
SUPPORTS UDP-MIB
INCLUDES { udpGroup }
::= { altigaCapModule 1 }
END

260
snmp_mib_archive/ALTIGA-CERT-STATS-MIB.my 2
View File

@ -1,260 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-CERT-STATS-MIB.my: Altiga Digital Certificates Statistics.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-CERT-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, Counter32, Gauge32
FROM SNMPv2-SMI
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsCert, alCertGroup
FROM ALTIGA-MIB
alCertMibModule
FROM ALTIGA-GLOBAL-REG;
altigaCertStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga Digital Certificates Statistics MIB models counters and objects that are
of management interest for digital certificates.
Acronyms
The following acronyms are used in this document:
CA: Certificate Authority
CRL: Certificate Revocation List
IP: Internet Protocol
MIB: Management Information Base
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alCertMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsCertGlobal OBJECT IDENTIFIER ::= { alStatsCert 1 }
alCertStatsServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlCertStatsServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List table listing the CA servers."
::= { alStatsCert 2 }
alCertStatsServerEntry OBJECT-TYPE
SYNTAX AlCertStatsServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry representing a CA server."
INDEX { alCertStatsServerIndex }
::= { alCertStatsServerTable 1 }
AlCertStatsServerEntry ::= SEQUENCE {
alCertStatsServerIndex Integer32,
alCertStatsServerAddress IpAddress,
alCertStatsServerPortNumber Integer32,
alCertStatsServerCertRequests Counter32,
alCertStatsServerCertRetransmissions Counter32,
alCertStatsServerCertRcvd Counter32,
alCertStatsServerCertPendingRequests Gauge32,
alCertStatsServerCertTimeouts Counter32,
alCertStatsServerCRLRequests Counter32,
alCertStatsServerCRLRetransmissions Counter32,
alCertStatsServerCRLRcvd Counter32,
alCertStatsServerCRLPendingRequests Gauge32,
alCertStatsServerCRLTimeouts Counter32
}
alCertStatsServerIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of this CA."
::= { alCertStatsServerEntry 1 }
alCertStatsServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of this CA."
::= { alCertStatsServerEntry 2 }
alCertStatsServerPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of this CA."
::= { alCertStatsServerEntry 3 }
alCertStatsServerCertRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of certificate request packets sent
to this CA since client start-up. This does not
include retransmissions."
::= { alCertStatsServerEntry 4 }
alCertStatsServerCertRetransmissions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of certificate request packets
retransmitted to this CA since client start-up."
::= { alCertStatsServerEntry 5 }
alCertStatsServerCertRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of certificates received from
this server since client start-up."
::= { alCertStatsServerEntry 6 }
alCertStatsServerCertPendingRequests OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of certificate request packets
destined for this server that have not yet timed out
or received a response. This variable is incremented
when certificate request is sent and decremented due to
receipt of a certificate, a timeout or retransmission."
::= { alCertStatsServerEntry 7 }
alCertStatsServerCertTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of certificate timeouts to this
server since client startup."
::= { alCertStatsServerEntry 8 }
alCertStatsServerCRLRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CRL request packets sent
to this CA since client start-up. This does not
include retransmissions."
::= { alCertStatsServerEntry 9 }
alCertStatsServerCRLRetransmissions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CRL request packets
retransmitted to this CA since client start-up."
::= { alCertStatsServerEntry 10 }
alCertStatsServerCRLRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CRL received from
this server since client start-up."
::= { alCertStatsServerEntry 11 }
alCertStatsServerCRLPendingRequests OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CRL request packets
destined for this server that have not yet timed out
or received a response. This variable is incremented
when certificate request is sent and decremented due to
receipt of a certificate, a timeout or retransmission."
::= { alCertStatsServerEntry 12 }
alCertStatsServerCRLTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CRL timeouts to this server since
client startup."
::= { alCertStatsServerEntry 13 }
altigaCertStatsMibConformance OBJECT IDENTIFIER ::= { altigaCertStatsMibModule 1 }
altigaCertStatsMibCompliances OBJECT IDENTIFIER ::= { altigaCertStatsMibConformance 1 }
altigaCertStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga Digital Certificates Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaCertStatsGroup
}
::= { altigaCertStatsMibCompliances 1 }
altigaCertStatsGroup OBJECT-GROUP
OBJECTS
{
alCertStatsServerIndex,
alCertStatsServerAddress,
alCertStatsServerPortNumber,
alCertStatsServerCertRequests,
alCertStatsServerCertRetransmissions,
alCertStatsServerCertRcvd,
alCertStatsServerCertPendingRequests,
alCertStatsServerCertTimeouts,
alCertStatsServerCRLRequests,
alCertStatsServerCRLRetransmissions,
alCertStatsServerCRLRcvd,
alCertStatsServerCRLPendingRequests,
alCertStatsServerCRLTimeouts
}
STATUS current
DESCRIPTION
"The objects for Cert statistics."
::= { alCertGroup 2 }
END

240
snmp_mib_archive/ALTIGA-DHCP-SERVER-STATS-MIB.my 2
View File

@ -1,240 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-DHCP-SERVER-STATS-MIB.my: The Altiga DHCP Server Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-DHCP-SERVER-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, Gauge32, Counter32
FROM SNMPv2-SMI
RowStatus, MacAddress, DisplayString
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsDhcpServer, alDhcpServerGroup
FROM ALTIGA-MIB
alDhcpServerMibModule
FROM ALTIGA-GLOBAL-REG;
altigaDhcpServerStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga DHCP Statistics Server MIB models counters and objects that are
of management interest for DHCP.
Acronyms
The following acronyms are used in this document:
DHCP: Dynamic Host Configuration Protocol
MIB: Management Information Base
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alDhcpServerMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsDhcpServerGlobal OBJECT IDENTIFIER ::= { alStatsDhcpServer 1 }
alDhcpServerStatsActiveLeases OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of active DHCP leases."
::= { alStatsDhcpServerGlobal 1 }
alDhcpServerStatsMaximumLeases OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of leases that were active at any one time."
::= { alStatsDhcpServerGlobal 2 }
alDhcpServerStatsDiscoversRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted DHCPDISCOVER messages."
::= { alStatsDhcpServerGlobal 3 }
alDhcpServerStatsOffersSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received DHCPOFFER messages."
::= { alStatsDhcpServerGlobal 4 }
alDhcpServerStatsAcksSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received original (i.e. in the REQUESTING state)
DHCPACK messages."
::= { alStatsDhcpServerGlobal 5 }
alDhcpServerStatsNaksSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received original (i.e. in the REQUESTING state)
DHCPNAK messages."
::= { alStatsDhcpServerGlobal 6 }
alDhcpServerStatsReqTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of request timeouts that occurred."
::= { alStatsDhcpServerGlobal 7 }
-- Per session stats
alDhcpServerStatsSessTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlDhcpServerStatsSessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of active sessions."
::= { alStatsDhcpServer 2 }
alDhcpServerStatsSessEntry OBJECT-TYPE
SYNTAX AlDhcpServerStatsSessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alDhcpServerStatsSessTable."
INDEX { alDhcpServerStatsSessId }
::= { alDhcpServerStatsSessTable 1 }
AlDhcpServerStatsSessEntry ::= SEQUENCE {
alDhcpServerStatsSessRowStatus RowStatus,
alDhcpServerStatsSessId Integer32,
alDhcpServerStatsSessIpAddr IpAddress,
alDhcpServerStatsSessLeaseExpire Gauge32,
alDhcpServerStatsSessMacAddr MacAddress,
alDhcpServerStatsSessHostName DisplayString
}
alDhcpServerStatsSessRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row. This can be used to delete the
lease, but can not be used to create one."
::= { alDhcpServerStatsSessEntry 1 }
alDhcpServerStatsSessId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique DHCP session ID used as the index for this row."
::= { alDhcpServerStatsSessEntry 2 }
alDhcpServerStatsSessIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the remote client."
::= { alDhcpServerStatsSessEntry 3 }
alDhcpServerStatsSessLeaseExpire OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remaining seconds until the current lease expires."
::= { alDhcpServerStatsSessEntry 4 }
alDhcpServerStatsSessMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of the client."
::= { alDhcpServerStatsSessEntry 5 }
alDhcpServerStatsSessHostName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Host Name of the client."
::= { alDhcpServerStatsSessEntry 6 }
altigaDhcpServerStatsMibConformance OBJECT IDENTIFIER ::= { altigaDhcpServerStatsMibModule 1 }
altigaDhcpServerStatsMibCompliances OBJECT IDENTIFIER ::= { altigaDhcpServerStatsMibConformance 1 }
altigaDhcpServerStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga DHCP Server Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaDhcpServerStatsGroup
}
::= { altigaDhcpServerStatsMibCompliances 1 }
altigaDhcpServerStatsGroup OBJECT-GROUP
OBJECTS
{
alDhcpServerStatsActiveLeases,
alDhcpServerStatsMaximumLeases,
alDhcpServerStatsDiscoversRcvd,
alDhcpServerStatsOffersSent,
alDhcpServerStatsAcksSent,
alDhcpServerStatsNaksSent,
alDhcpServerStatsReqTimeouts,
alDhcpServerStatsSessRowStatus,
alDhcpServerStatsSessId,
alDhcpServerStatsSessIpAddr,
alDhcpServerStatsSessLeaseExpire,
alDhcpServerStatsSessMacAddr,
alDhcpServerStatsSessHostName
}
STATUS current
DESCRIPTION
"The objects for the DHCP Server statistics."
::= { alDhcpServerGroup 2 }
END

381
snmp_mib_archive/ALTIGA-DHCP-STATS-MIB.my 2
View File

@ -1,381 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-DHCP-STATS-MIB.my: The Altiga DHCP Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-DHCP-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, Gauge32
FROM SNMPv2-SMI
RowStatus, DisplayString
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsDhcp, alDhcpGroup
FROM ALTIGA-MIB
alDhcpMibModule
FROM ALTIGA-GLOBAL-REG;
altigaDhcpStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga DHCP Statistics MIB models counters and objects that are
of management interest for DHCP.
Acronyms
The following acronyms are used in this document:
DHCP: Dynamic Host Configuration Protocol
MIB: Management Information Base
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alDhcpMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsDhcpGlobal OBJECT IDENTIFIER ::= { alStatsDhcp 1 }
alDhcpStatsActiveLeases OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of active DHCP leases."
::= { alStatsDhcpGlobal 1 }
alDhcpStatsMaximumLeases OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of leases that were active at any one time."
::= { alStatsDhcpGlobal 2 }
alDhcpStatsDiscoversSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted DHCPDISCOVER messages."
::= { alStatsDhcpGlobal 3 }
alDhcpStatsOffersRcvd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received DHCPOFFER messages."
::= { alStatsDhcpGlobal 4 }
alDhcpStatsInitRequestsSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of initially (i.e. in the SELECTING or REQUESTING state)
transmitted DHCPREQUEST messages."
::= { alStatsDhcpGlobal 5 }
alDhcpStatsT1RequestsSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted DHCPDISCOVER messages after the T1
timer expired."
::= { alStatsDhcpGlobal 6 }
alDhcpStatsT2RequestsSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted DHCPDISCOVER messages after the T2
timer expired."
::= { alStatsDhcpGlobal 7 }
alDhcpStatsInitAcksRcvd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received original (i.e. in the REQUESTING state)
DHCPACK messages."
::= { alStatsDhcpGlobal 8 }
alDhcpStatsInitNaksRcvd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received original (i.e. in the REQUESTING state)
DHCPNAK messages."
::= { alStatsDhcpGlobal 9 }
alDhcpStatsT1AcksRcvd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received DHCPACK messages after the T1 timer
expired."
::= { alStatsDhcpGlobal 10 }
alDhcpStatsT1NaksRcvd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received DHCPNAK messages after the T1 timer
expired."
::= { alStatsDhcpGlobal 11 }
alDhcpStatsT2AcksRcvd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received DHCPACK messages after the T2 timer
expired."
::= { alStatsDhcpGlobal 12 }
alDhcpStatsT2NaksRcvd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received DHCPNAK messages after the T2 timer
expired."
::= { alStatsDhcpGlobal 13 }
alDhcpStatsT1Timeouts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of T1 timeouts that occurred."
::= { alStatsDhcpGlobal 14 }
alDhcpStatsT2Timeouts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of T2 timeouts that occurred."
::= { alStatsDhcpGlobal 15 }
alDhcpStatsApiRequests OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests made to obtain an IP address from
the DHCP module."
::= { alStatsDhcpGlobal 16 }
alDhcpStatsLeaseTimeouts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of leases that expired."
::= { alStatsDhcpGlobal 17 }
-- Per session stats
alDhcpStatsSessTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlDhcpStatsSessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of active sessions."
::= { alStatsDhcp 2 }
alDhcpStatsSessEntry OBJECT-TYPE
SYNTAX AlDhcpStatsSessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alDhcpStatsSessTable."
INDEX { alDhcpStatsSessIpAddr }
::= { alDhcpStatsSessTable 1 }
AlDhcpStatsSessEntry ::= SEQUENCE {
alDhcpStatsSessRowStatus RowStatus,
alDhcpStatsSessId Integer32,
alDhcpStatsSessKey Integer32,
alDhcpStatsSessIpAddr IpAddress,
alDhcpStatsSessUpTime Integer32,
alDhcpStatsSessLeaseDuration Integer32,
alDhcpStatsSessLeaseExpire Integer32,
alDhcpStatsSessState DisplayString,
alDhcpStatsSessClientId DisplayString,
alDhcpStatsSessSrvrIpAddr IpAddress
}
alDhcpStatsSessRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row. This can be used to delete the
lease, but can not be used to create one."
::= { alDhcpStatsSessEntry 1 }
alDhcpStatsSessId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique DHCP session ID used as the index for this row."
::= { alDhcpStatsSessEntry 2 }
alDhcpStatsSessKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DHCP hash key for this lease."
::= { alDhcpStatsSessEntry 3 }
alDhcpStatsSessIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the remote client."
::= { alDhcpStatsSessEntry 4 }
alDhcpStatsSessUpTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total length of time that this session has had active
lease(s)."
::= { alDhcpStatsSessEntry 5 }
alDhcpStatsSessLeaseDuration OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The duration of the current lease."
::= { alDhcpStatsSessEntry 6 }
alDhcpStatsSessLeaseExpire OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remaining seconds until the current lease expires."
::= { alDhcpStatsSessEntry 7 }
alDhcpStatsSessState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of this session."
::= { alDhcpStatsSessEntry 8 }
alDhcpStatsSessClientId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The full 'client ID' value associated with this lease."
::= { alDhcpStatsSessEntry 9 }
alDhcpStatsSessSrvrIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the server from which this lease
was obtained."
::= { alDhcpStatsSessEntry 10 }
altigaDhcpStatsMibConformance OBJECT IDENTIFIER ::= { altigaDhcpStatsMibModule 1 }
altigaDhcpStatsMibCompliances OBJECT IDENTIFIER ::= { altigaDhcpStatsMibConformance 1 }
altigaDhcpStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga DHCP Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaDhcpStatsGroup
}
::= { altigaDhcpStatsMibCompliances 1 }
altigaDhcpStatsGroup OBJECT-GROUP
OBJECTS
{
alDhcpStatsActiveLeases,
alDhcpStatsMaximumLeases,
alDhcpStatsDiscoversSent,
alDhcpStatsOffersRcvd,
alDhcpStatsInitRequestsSent,
alDhcpStatsT1RequestsSent,
alDhcpStatsT2RequestsSent,
alDhcpStatsInitAcksRcvd,
alDhcpStatsInitNaksRcvd,
alDhcpStatsT1AcksRcvd,
alDhcpStatsT1NaksRcvd,
alDhcpStatsT2AcksRcvd,
alDhcpStatsT2NaksRcvd,
alDhcpStatsT1Timeouts,
alDhcpStatsT2Timeouts,
alDhcpStatsApiRequests,
alDhcpStatsLeaseTimeouts,
alDhcpStatsSessRowStatus,
alDhcpStatsSessId,
alDhcpStatsSessKey,
alDhcpStatsSessIpAddr,
alDhcpStatsSessUpTime,
alDhcpStatsSessLeaseDuration,
alDhcpStatsSessLeaseExpire,
alDhcpStatsSessState,
alDhcpStatsSessClientId,
alDhcpStatsSessSrvrIpAddr
}
STATUS current
DESCRIPTION
"The objects for the DHCP Server statistics."
::= { alDhcpGroup 2 }
END

135
snmp_mib_archive/ALTIGA-DNS-STATS-MIB.my 2
View File

@ -1,135 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-DNS-STATS-MIB.my: Altiga DNS Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-DNS-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Gauge32
FROM SNMPv2-SMI
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsDns, alDnsGroup
FROM ALTIGA-MIB
alDnsMibModule
FROM ALTIGA-GLOBAL-REG;
altigaDnsStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga DNS Statistics MIB models counters and objects that are
of management interest for DNS.
Acronyms
The following acronyms are used in this document:
DNS: Domain Name Service
MIB: Management Information Base
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alDnsMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsDnsResolverGlobal OBJECT IDENTIFIER ::= { alStatsDns 1 }
alDnsStatsAttemptedQueries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DNS queries that were attempted."
::= { alStatsDnsResolverGlobal 1 }
alDnsStatsSuccessfulResponses OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of queries that were successfully resolved."
::= { alStatsDnsResolverGlobal 2 }
alDnsStatsTimeoutFailures OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of failures because there was no response from
the server."
::= { alStatsDnsResolverGlobal 3 }
alDnsStatsUnreachableServerFailures OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of failures because the address of the server
is not reachable according to the Concentrator's routing
table."
::= { alStatsDnsResolverGlobal 4 }
alDnsStatsMiscFailures OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of failures for an unspecified reason."
::= { alStatsDnsResolverGlobal 5 }
altigaDnsStatsMibConformance OBJECT IDENTIFIER ::= { altigaDnsStatsMibModule 1 }
altigaDnsStatsMibCompliances OBJECT IDENTIFIER ::= { altigaDnsStatsMibConformance 1 }
altigaDnsStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga DNS Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaDnsStatsGroup
}
::= { altigaDnsStatsMibCompliances 1 }
altigaDnsStatsGroup OBJECT-GROUP
OBJECTS
{
alDnsStatsAttemptedQueries,
alDnsStatsSuccessfulResponses,
alDnsStatsTimeoutFailures,
alDnsStatsUnreachableServerFailures,
alDnsStatsMiscFailures
}
STATUS current
DESCRIPTION
"The objects for the DNS resolver module statistics."
::= { alDnsGroup 2 }
END

177
snmp_mib_archive/ALTIGA-EVENT-STATS-MIB.my 2
View File

@ -1,177 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-EVENT-STATS-MIB.my: Altiga Event Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002, 2003 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-EVENT-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsEvent, alEventGroup
FROM ALTIGA-MIB
alEventMibModule
FROM ALTIGA-GLOBAL-REG;
altigaEventStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200301130000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga Event Statistics MIB models counters and objects that are
of management interest for events.
Acronyms
The following acronyms are used in this document:
MIB: Management Information Base
"
REVISION "200301130000Z"
DESCRIPTION
"Added alStatsEventNotificationId object"
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alEventMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsEventGlobal OBJECT IDENTIFIER ::= { alStatsEvent 1 }
alStatsEventNotificationId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The event class and event ID string in class/id format.
The string applies as the product is configured to
send log events whenever SNMP generates notifications."
::= { alStatsEventGlobal 1 }
alEventStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlEventStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Event Stats Per Class/Event Number."
::= { alStatsEvent 2 }
alEventStatsEntry OBJECT-TYPE
SYNTAX AlEventStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alEventStatsTable."
INDEX { alEventStatsClass, alEventStatsEventNumber }
::= { alEventStatsTable 1 }
AlEventStatsEntry ::= SEQUENCE {
alEventStatsClass Integer32,
alEventStatsEventNumber Integer32,
alEventStatsCount Counter32
}
alEventStatsClass OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The primary index of this row, the event class."
::= { alEventStatsEntry 1 }
alEventStatsEventNumber OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The secondary index of this row, the event number."
::= { alEventStatsEntry 2 }
alEventStatsCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that the given event for the give class has
been generated."
::= { alEventStatsEntry 3 }
altigaEventStatsMibConformance OBJECT IDENTIFIER
::= { altigaEventStatsMibModule 1 }
altigaEventStatsMibCompliances OBJECT IDENTIFIER
::= { altigaEventStatsMibConformance 1 }
altigaEventStatsMibCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for agents which
implement the Altiga Event Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaEventStatsGroup
}
::= { altigaEventStatsMibCompliances 1 }
altigaEventStatsMibComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga Event Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaEventStatsGroupRev1
}
::= { altigaEventStatsMibCompliances 2 }
altigaEventStatsGroup OBJECT-GROUP
OBJECTS
{
alEventStatsClass,
alEventStatsEventNumber,
alEventStatsCount
}
STATUS deprecated
DESCRIPTION
"The objects for Event Statistics."
::= { alEventGroup 2 }
altigaEventStatsGroupRev1 OBJECT-GROUP
OBJECTS
{
alEventStatsClass,
alEventStatsEventNumber,
alEventStatsCount,
alStatsEventNotificationId
}
STATUS current
DESCRIPTION
"The objects for Event Statistics."
::= { alEventGroup 3 }
END

294
snmp_mib_archive/ALTIGA-FILTER-STATS-MIB.my 2
View File

@ -1,294 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-FILTER-STATS-MIB.my: Altiga Filter Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-FILTER-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, TimeTicks, Counter32
FROM SNMPv2-SMI
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsFilter, alFilterGroup
FROM ALTIGA-MIB
alFilterMibModule
FROM ALTIGA-GLOBAL-REG;
altigaFilterStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga Filter Statistics MIB models counters and objects that are
of management interest for filters.
Acronyms
The following acronyms are used in this document:
ICMP: Internet Control Message Protocol
MIB: Management Information Base
Rx: Received
TCP: Transmission Control Protocol
Tx: Transmitted
UDP: User Datagram Protocol
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alFilterMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsFilterGlobal OBJECT IDENTIFIER ::= { alStatsFilter 1 }
alFilterStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlFilterStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of filter statistics."
::= { alStatsFilter 2 }
alFilterStatsEntry OBJECT-TYPE
SYNTAX AlFilterStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alFilterStatsTable."
INDEX { alFilterStatsInterfaceId }
::= { alFilterStatsTable 1 }
AlFilterStatsEntry ::= SEQUENCE {
alFilterStatsInterfaceId Integer32,
alFilterStatsStartTime TimeTicks,
alFilterStatsInPktsFiltered Counter32,
alFilterStatsOutPktsFiltered Counter32,
alFilterStatsInPktsRx Counter32,
alFilterStatsOutPktsRx Counter32,
alFilterStatsInPktsTx Counter32,
alFilterStatsOutPktsTx Counter32,
alFilterStatsInShortTcpHdr Counter32,
alFilterStatsOutShortTcpHdr Counter32,
alFilterStatsInShortUdpHdr Counter32,
alFilterStatsOutShortUdpHdr Counter32,
alFilterStatsInTcpFragDiscard Counter32,
alFilterStatsOutTcpFragDiscard Counter32,
alFilterStatsInIcmpFragDiscard Counter32,
alFilterStatsOutIcmpFragDiscard Counter32
}
alFilterStatsInterfaceId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The primary index of this row, the IP interface ID."
::= { alFilterStatsEntry 1 }
alFilterStatsStartTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Start time the filter became active."
::= { alFilterStatsEntry 2 }
alFilterStatsInPktsFiltered OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of inbound packets discarded on this interface."
::= { alFilterStatsEntry 3 }
alFilterStatsOutPktsFiltered OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of outbound packets discarded on this interface."
::= { alFilterStatsEntry 4 }
alFilterStatsInPktsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of inbound packets received on this interface."
::= { alFilterStatsEntry 5 }
alFilterStatsOutPktsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of outbound packets received on this interface.
This count includes filtered (dropped) packets."
::= { alFilterStatsEntry 6 }
alFilterStatsInPktsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of inbound packets forwarded on this interface."
::= { alFilterStatsEntry 7 }
alFilterStatsOutPktsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of outbound packets forwarded on this interface.
This count does not include filtered packets."
::= { alFilterStatsEntry 8 }
alFilterStatsInShortTcpHdr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of inbound TCP packets discarded on this interface
because the header was incomplete."
::= { alFilterStatsEntry 9 }
alFilterStatsOutShortTcpHdr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of outbound TCP packets discarded on this interface
because the header was incomplete."
::= { alFilterStatsEntry 10 }
alFilterStatsInShortUdpHdr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of inbound UDP packets discarded on this interface
because the header was incomplete."
::= { alFilterStatsEntry 11 }
alFilterStatsOutShortUdpHdr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of outbound UDP packets discarded on this interface
because the header was incomplete."
::= { alFilterStatsEntry 12 }
alFilterStatsInTcpFragDiscard OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of inbound TCP packets discarded on this interface
because packet was fragmented."
::= { alFilterStatsEntry 13 }
alFilterStatsOutTcpFragDiscard OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of outbound TCP packets discarded on this interface
because packet was fragmented."
::= { alFilterStatsEntry 14 }
alFilterStatsInIcmpFragDiscard OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of inbound ICMP packets discarded on this interface
because packet was fragmented."
::= { alFilterStatsEntry 15 }
alFilterStatsOutIcmpFragDiscard OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of outbound ICMP packets discarded on this interface
because packet was fragmented."
::= { alFilterStatsEntry 16 }
altigaFilterStatsMibConformance OBJECT IDENTIFIER ::= { altigaFilterStatsMibModule 1 }
altigaFilterStatsMibCompliances OBJECT IDENTIFIER ::= { altigaFilterStatsMibConformance 1 }
altigaFilterStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga Filter Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaFilterStatsGroup
}
::= { altigaFilterStatsMibCompliances 1 }
altigaFilterStatsGroup OBJECT-GROUP
OBJECTS
{
alFilterStatsInterfaceId,
alFilterStatsStartTime,
alFilterStatsInPktsFiltered,
alFilterStatsOutPktsFiltered,
alFilterStatsInPktsRx,
alFilterStatsOutPktsRx,
alFilterStatsInPktsTx,
alFilterStatsOutPktsTx,
alFilterStatsInShortTcpHdr,
alFilterStatsOutShortTcpHdr,
alFilterStatsInShortUdpHdr,
alFilterStatsOutShortUdpHdr,
alFilterStatsInTcpFragDiscard,
alFilterStatsOutTcpFragDiscard,
alFilterStatsInIcmpFragDiscard,
alFilterStatsOutIcmpFragDiscard
}
STATUS current
DESCRIPTION
"The objects for filter statistics."
::= { alFilterGroup 2 }
END

217
snmp_mib_archive/ALTIGA-FTP-STATS-MIB.my 2
View File

@ -1,217 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-FTP-STATS-MIB.my: FTP Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-FTP-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32
FROM SNMPv2-SMI
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsFtp, alFtpGroup
FROM ALTIGA-MIB
alFtpMibModule
FROM ALTIGA-GLOBAL-REG;
altigaFtpStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga FTP Statistics MIB models counters and objects
that are of management interest for FTP.
Acronyms
The following acronyms are used in this document:
FTP: File Transfer Protocol
MIB: Management Information Base
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alFtpMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsFtpServerGlobal OBJECT IDENTIFIER ::= { alStatsFtp 1 }
alStatsFtpClientGlobal OBJECT IDENTIFIER ::= { alStatsFtp 2 }
alFtpClientStatsMaxSess OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current maximum number of FTP client sessions."
::= { alStatsFtpClientGlobal 1 }
alFtpClientStatsTotalSess OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of FTP client sessions since boot."
::= { alStatsFtpClientGlobal 2 }
alFtpClientStatsGoodConns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successful FTP client connections
since boot."
::= { alStatsFtpClientGlobal 3 }
alFtpClientStatsBadConns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unsuccessful FTP client connections
since boot."
::= { alStatsFtpClientGlobal 4 }
alFtpClientStatsGoodDataConns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successful FTP client data-socket
connections since boot."
::= { alStatsFtpClientGlobal 5 }
alFtpClientStatsBadDataConns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unsuccessful FTP client data-socket
connections since boot."
::= { alStatsFtpClientGlobal 6 }
alFtpClientStatsGoodFileXfers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful FTP client file transfers
since boot."
::= { alStatsFtpClientGlobal 7 }
alFtpClientStatsBadFileXfers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numner of unsuccessful FTP client file transfers
since boot."
::= { alStatsFtpClientGlobal 8 }
alFtpClientStatsAsciiXfers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of FTP client ASCII mode transfers
since boot."
::= { alStatsFtpClientGlobal 9 }
alFtpClientStatsBinaryXfers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of FTP client BINARY mode transfers
since boot."
::= { alStatsFtpClientGlobal 10 }
alFtpClientStatsOctetsXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number bytes transmitted by the FTP client
since boot."
::= { alStatsFtpClientGlobal 11 }
alFtpClientStatsOctetsRecv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number bytes received by the FTP client
since boot."
::= { alStatsFtpClientGlobal 12 }
alFtpClientStatsTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of FTP client command/response timeouts
since boot."
::= { alStatsFtpClientGlobal 13 }
altigaFtpStatsMibConformance OBJECT IDENTIFIER ::= { altigaFtpStatsMibModule 1 }
altigaFtpStatsMibCompliances OBJECT IDENTIFIER ::= { altigaFtpStatsMibConformance 1 }
altigaFtpStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga FTP Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaFtpStatsGroup
}
::= { altigaFtpStatsMibCompliances 1 }
altigaFtpStatsGroup OBJECT-GROUP
OBJECTS
{
alFtpClientStatsMaxSess,
alFtpClientStatsTotalSess,
alFtpClientStatsGoodConns,
alFtpClientStatsBadConns,
alFtpClientStatsGoodDataConns,
alFtpClientStatsBadDataConns,
alFtpClientStatsGoodFileXfers,
alFtpClientStatsBadFileXfers,
alFtpClientStatsAsciiXfers,
alFtpClientStatsBinaryXfers,
alFtpClientStatsOctetsXmit,
alFtpClientStatsOctetsRecv,
alFtpClientStatsTimeouts
}
STATUS current
DESCRIPTION
"The objects for Ftp statistics."
::= { alFtpGroup 2 }
END

156
snmp_mib_archive/ALTIGA-GENERAL-STATS-MIB.my 2
View File

@ -1,156 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-GENERAL-STATS-MIB.my: Altiga General Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-GENERAL-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Gauge32, Counter32, Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
alStatsGeneral, alGeneralGroup
FROM ALTIGA-MIB
alGeneralMibModule
FROM ALTIGA-GLOBAL-REG;
altigaGeneralStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209111300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga General Statistics MIB models counters and
objects that are of management interest.
Acronyms
The following acronyms are used in this document:
AVP: Attribute/Value Pair
CLID: Calling Line ID
DNIS: Dialed Number Identification Service
L2TP: Layer 2 Tunnel Protocol
LAC: L2TP Access Concentrator
LNS: L2TP Network Server
RWS: Receive Window Size
"
REVISION "200209111300Z"
DESCRIPTION
"Added module compliance and fix comments."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alGeneralMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsGeneralGlobal OBJECT IDENTIFIER ::= { alStatsGeneral 1 }
alGeneralTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current time on the box, represented as a time_t.
In 1.2, this was the box's local time.
After 1.2, it was corrected to represent UTC (which is what it
is supposed to be). So all boxes should have this be the same
value +/- a few seconds."
::= { alStatsGeneralGlobal 1 }
alGeneralGaugeCpuUtil OBJECT-TYPE
SYNTAX Gauge32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the CPU Utilization gauge which indicates
percentage of CPU utilized."
::= { alStatsGeneralGlobal 2 }
alGeneralGaugeActiveSessions OBJECT-TYPE
SYNTAX Gauge32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Active Sessions gauge which indicates the
percentage of total permitted session that are active."
::= { alStatsGeneralGlobal 3 }
alGeneralGaugeThroughput OBJECT-TYPE
SYNTAX Gauge32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Throughput gauge which indicates the
percentage of total available throughput in-use."
::= { alStatsGeneralGlobal 4 }
alGeneralTimeZone OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time zone configured on the box. Measured in minutes from
UTC. e.g. EST = -300."
::= { alStatsGeneralGlobal 5 }
altigaGeneralStatsMibConformance OBJECT IDENTIFIER
::= { altigaGeneralStatsMibModule 1 }
altigaGeneralStatsMibCompliances OBJECT IDENTIFIER
::= { altigaGeneralStatsMibConformance 1 }
altigaGeneralStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which implement the
Altiga General Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaGeneralStatsGroup
}
::= { altigaGeneralStatsMibCompliances 1 }
altigaGeneralStatsGroup OBJECT-GROUP
OBJECTS
{
alGeneralTime,
alGeneralGaugeCpuUtil,
alGeneralGaugeActiveSessions,
alGeneralGaugeThroughput,
alGeneralTimeZone
}
STATUS current
DESCRIPTION
"The objects for general information."
::= { alGeneralGroup 2 }
END

267
snmp_mib_archive/ALTIGA-GLOBAL-REG.my 2
View File

@ -1,267 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-GLOBAL-REG.my: Altiga Networks Central Registration MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002, 2003, 2005 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-GLOBAL-REG DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, enterprises
FROM SNMPv2-SMI;
altigaGlobalRegModule MODULE-IDENTITY
LAST-UPDATED "200501050000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga Networks central registration module.
Acronyms
The following acronyms are used in this document:
ACE: Access Control Encryption
BwMgmt: Bandwidth Management
CTCP: Cisco Transmission Control Protocol
DHCP: Dynamic Host Configuration Protocol
DNS: Domain Name Service
FTP: File Transfer Protocol
FW: Firewall
HTTP: HyperText Transfer Protocol
ICMP: Internet Control Message Protocol
IKE: Internet Key Exchange
IP: Internet Protocol
LBSSF: Load Balance Secure Session Failover
L2TP: Layer-2 Tunneling Protocol
MIB: Management Information Base
NAT: Network Address Translation
NTP: Network Time Protocol
PPP: Point-to-Point Protocol
PPTP: Point-to-Point Tunneling Protocol
SEP: Scalable Encryption Processor
SNMP: Simple Network Management Protocol
SSH: Secure Shell Protocol
SSL: Secure Sockets Layer
UDP: User Datagram Protocol
VPN: Virtual Private Network
NAC: Network Admission Control
"
REVISION "200501050000Z"
DESCRIPTION
"Added the new MIB Modules(65 to 67)"
REVISION "200310200000Z"
DESCRIPTION
"Added the new MIB Modules(58 to 64)"
REVISION "200304250000Z"
DESCRIPTION
"Added the new MIB Modules(54 to 57)"
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alGlobalRegModule 1 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Altiga's root
altigaRoot OBJECT IDENTIFIER ::= { enterprises 3076 }
--cisco OBJECT IDENTIFIER ::= { enterprises 9 }
--ciscoMgmt OBJECT IDENTIFIER ::= { cisco 9 }
--ciscoExperiment OBJECT IDENTIFIER ::= { cisco 10 }
-- Altiga's registrations and modules
altigaReg OBJECT IDENTIFIER ::= { altigaRoot 1 }
altigaModules OBJECT IDENTIFIER ::= { altigaReg 1 }
alGlobalRegModule OBJECT IDENTIFIER ::= { altigaModules 1 }
alCapModule OBJECT IDENTIFIER ::= { altigaModules 2 }
alMibModule OBJECT IDENTIFIER ::= { altigaModules 3 }
alComplModule OBJECT IDENTIFIER ::= { altigaModules 4 }
alVersionMibModule OBJECT IDENTIFIER ::= { altigaModules 6 }
alAccessMibModule OBJECT IDENTIFIER ::= { altigaModules 7 }
alEventMibModule OBJECT IDENTIFIER ::= { altigaModules 8 }
alAuthMibModule OBJECT IDENTIFIER ::= { altigaModules 9 }
alPptpMibModule OBJECT IDENTIFIER ::= { altigaModules 10 }
alPppMibModule OBJECT IDENTIFIER ::= { altigaModules 11 }
alHttpMibModule OBJECT IDENTIFIER ::= { altigaModules 12 }
alIpMibModule OBJECT IDENTIFIER ::= { altigaModules 13 }
alFilterMibModule OBJECT IDENTIFIER ::= { altigaModules 14 }
alUserMibModule OBJECT IDENTIFIER ::= { altigaModules 15 }
alTelnetMibModule OBJECT IDENTIFIER ::= { altigaModules 16 }
alFtpMibModule OBJECT IDENTIFIER ::= { altigaModules 17 }
alTftpMibModule OBJECT IDENTIFIER ::= { altigaModules 18 }
alSnmpMibModule OBJECT IDENTIFIER ::= { altigaModules 19 }
alIpSecMibModule OBJECT IDENTIFIER ::= { altigaModules 20 }
alL2tpMibModule OBJECT IDENTIFIER ::= { altigaModules 21 }
alSessionMibModule OBJECT IDENTIFIER ::= { altigaModules 22 }
alDnsMibModule OBJECT IDENTIFIER ::= { altigaModules 23 }
alAddressMibModule OBJECT IDENTIFIER ::= { altigaModules 24 }
alDhcpMibModule OBJECT IDENTIFIER ::= { altigaModules 25 }
alWatchdogMibModule OBJECT IDENTIFIER ::= { altigaModules 26 }
alHardwareMibModule OBJECT IDENTIFIER ::= { altigaModules 27 }
alNatMibModule OBJECT IDENTIFIER ::= { altigaModules 28 }
alLan2LanMibModule OBJECT IDENTIFIER ::= { altigaModules 29 }
alGeneralMibModule OBJECT IDENTIFIER ::= { altigaModules 30 }
alSslMibModule OBJECT IDENTIFIER ::= { altigaModules 31 }
alCertMibModule OBJECT IDENTIFIER ::= { altigaModules 32 }
alNtpMibModule OBJECT IDENTIFIER ::= { altigaModules 33 }
alNetworkListMibModule OBJECT IDENTIFIER ::= { altigaModules 34 }
alSepMibModule OBJECT IDENTIFIER ::= { altigaModules 35 }
alIkeMibModule OBJECT IDENTIFIER ::= { altigaModules 36 }
alSyncMibModule OBJECT IDENTIFIER ::= { altigaModules 37 }
alT1E1MibModule OBJECT IDENTIFIER ::= { altigaModules 38 }
alMultiLinkMibModule OBJECT IDENTIFIER ::= { altigaModules 39 }
alSshMibModule OBJECT IDENTIFIER ::= { altigaModules 40 }
alLBSSFMibModule OBJECT IDENTIFIER ::= { altigaModules 41 }
alDhcpServerMibModule OBJECT IDENTIFIER ::= { altigaModules 42 }
alAutoUpdateMibModule OBJECT IDENTIFIER ::= { altigaModules 43 }
alAdminAuthMibModule OBJECT IDENTIFIER ::= { altigaModules 44 }
alPPPoEMibModule OBJECT IDENTIFIER ::= { altigaModules 45 }
alXmlMibModule OBJECT IDENTIFIER ::= { altigaModules 46 }
alCtcpMibModule OBJECT IDENTIFIER ::= { altigaModules 47 }
alFwMibModule OBJECT IDENTIFIER ::= { altigaModules 48 }
alGroupMatchMibModule OBJECT IDENTIFIER ::= { altigaModules 49 }
alACEServerMibModule OBJECT IDENTIFIER ::= { altigaModules 50 }
alNatTMibModule OBJECT IDENTIFIER ::= { altigaModules 51 }
alBwMgmtMibModule OBJECT IDENTIFIER ::= { altigaModules 52 }
alIpSecPreFragMibModule OBJECT IDENTIFIER ::= { altigaModules 53 }
alFipsMibModule OBJECT IDENTIFIER ::= { altigaModules 54 }
alBackupL2LMibModule OBJECT IDENTIFIER ::= { altigaModules 55 }
alNotifyMibModule OBJECT IDENTIFIER ::= { altigaModules 56 }
alRebootStatusMibModule OBJECT IDENTIFIER ::= { altigaModules 57 }
alAuthorizationModule OBJECT IDENTIFIER ::= { altigaModules 58 }
alWebPortalMibModule OBJECT IDENTIFIER ::= { altigaModules 59 }
alWebEmailMibModule OBJECT IDENTIFIER ::= { altigaModules 60 }
alPortForwardMibModule OBJECT IDENTIFIER ::= { altigaModules 61 }
alRemoteServerMibModule OBJECT IDENTIFIER ::= { altigaModules 62 }
alWebvpnAclMibModule OBJECT IDENTIFIER ::= { altigaModules 63 }
alNbnsMibModule OBJECT IDENTIFIER ::= { altigaModules 64 }
alSecureDesktopMibModule OBJECT IDENTIFIER ::= { altigaModules 65 }
alSslTunnelClientMibModule OBJECT IDENTIFIER ::= { altigaModules 66 }
alNacMibModule OBJECT IDENTIFIER ::= { altigaModules 67 }
-- Altiga's company-wide objects and events
altigaGeneric OBJECT IDENTIFIER ::= { altigaRoot 2 }
-- See altiga.mi2
-- Altiga's product-specific objects and events
altigaProducts OBJECT IDENTIFIER ::= { altigaRoot 3 }
-- Altiga's Agent profiles
altigaCaps OBJECT IDENTIFIER ::= { altigaRoot 4 }
-- See altiga-cap.mi2
-- Altiga Requirement specifications
altigaReqs OBJECT IDENTIFIER ::= { altigaRoot 5 }
-- We will likely have nothing here
-- Altiga Experiments
altigaExpr OBJECT IDENTIFIER ::= { altigaRoot 6 }
-- We will likely have nothing here
-- Altiga Product Families
altigaHw OBJECT IDENTIFIER ::= { altigaReg 2 }
-- VPN Concentrator Product
altigaVpnHw OBJECT IDENTIFIER ::= { altigaHw 1 }
-- VPN Concentrator Components
altigaVpnChassis OBJECT IDENTIFIER ::= { altigaVpnHw 1 }
altigaVpnIntf OBJECT IDENTIFIER ::= { altigaVpnHw 2 }
altigaVpnEncrypt OBJECT IDENTIFIER ::= { altigaVpnHw 3 }
-- VPN Concentrator Chassis
-- Cxx (C10/15/20/30/50/60/80) 30xx
vpnConcentrator OBJECT IDENTIFIER ::= { altigaVpnChassis 1 }
-- C5/3005
vpnRemote OBJECT IDENTIFIER ::= { altigaVpnChassis 2 }
-- 3002
vpnClient OBJECT IDENTIFIER ::= { altigaVpnChassis 3 }
-- VPN Concentrator Chassis Revisions
--Concentrators (C10/15/20/30/50/60/80) 30xx
vpnConcentratorRev1 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The first revision of Altiga's VPN Concentrator hardware.
603e PPC processor. C10/15/20/30/50/60."
::= { vpnConcentrator 1 }
vpnConcentratorRev2 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The second revision of Altiga's VPN Concentrator hardware.
740 PPC processor. C10/15/20/30/50/60."
::= { vpnConcentrator 2 }
--Remotes (a.k.a. Concentrators) 3005
vpnRemoteRev1 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The first revision of Altiga's VPN Concentrator (Remote) hardware.
8240 PPC processor."
::= { vpnRemote 1 }
--Clients (a.k.a. Hardware Client) 3002
vpnClientRev1 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The first revision of Altiga's VPN Hardware Client hardware.
8260 PPC processor."
::= { vpnClient 1 }
-- VPN Concentrator Interface Cards (VOX also)
-- none
-- VPN Concentrator Encryption Cards
-- none
END

748
snmp_mib_archive/ALTIGA-HARDWARE-STATS-MIB.my 2
View File

@ -1,748 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-HARDWARE-STATS-MIB.my: Altiga Hardware Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002, 2003 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-HARDWARE-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, Counter32,
TimeTicks, Unsigned32
FROM SNMPv2-SMI
DisplayString, TruthValue, TEXTUAL-CONVENTION
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsHardware, alHardwareGroup
FROM ALTIGA-MIB
alHardwareMibModule
FROM ALTIGA-GLOBAL-REG;
altigaHardwareStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200303271300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga Hardware Statistics MIB models counters and objects that
are of management interest for the hardware.
Acronyms
The following acronyms are used in this document:
CPU: Central Processing Unit
MB: Megabyte
MIB: Management Information Base
PS: Power Supply
RPM: Revolutions Per Minute
SEP: Scalable Encryption Processor
WAN: Wide Area Network
"
REVISION "200303271300Z"
DESCRIPTION
"Added new emun to ConcentratorCard."
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alHardwareMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
ConcentratorCard ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Concentrator Card Type."
SYNTAX INTEGER {
none(1),
sep(2),
dualT1Wan(3),
sepE(4)
}
ConcentratorType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Concentrator Type indicates the chassis type."
SYNTAX INTEGER {
cxx(1), -- VPN3015 through VPN3080
c5(2), -- VPN3005
c1(3) -- VPN3002
}
alStatsHardwareGlobal OBJECT IDENTIFIER ::= { alStatsHardware 1 }
-- Current Settings and Alarms
alHardwareCpuVoltage OBJECT-TYPE
SYNTAX Gauge32
UNITS "centivolts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current CPU voltage in centivolts."
::= { alStatsHardwareGlobal 1 }
alHardwareCpuVoltageAlarm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alarm status for CPU voltage. This alarm will fired when the CPU
voltage is detected out of configured range."
::= { alStatsHardwareGlobal 2 }
alHardwareCpuVoltageCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of alarm events for CPU voltage."
::= { alStatsHardwareGlobal 3 }
alHardwareCpuVoltageTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUptime at the time of the last change of alarm status for CPU
voltage."
::= { alStatsHardwareGlobal 4 }
alHardwarePs1Voltage3v OBJECT-TYPE
SYNTAX Gauge32
UNITS "centivolts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current 3V voltage of Power Supply 1 in centivolts."
::= { alStatsHardwareGlobal 5 }
alHardwarePs1Voltage3vAlarm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alarm status for PS1 3v voltage. This alarm will fired when the
3v power supply 1 voltage is detected out of configured range."
::= { alStatsHardwareGlobal 6 }
alHardwarePs1Voltage3vCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of alarm events for PS1 3v voltage."
::= { alStatsHardwareGlobal 7 }
alHardwarePs1Voltage3vTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUptime at the time of the last change of alarm status for PS1
3v voltage."
::= { alStatsHardwareGlobal 8 }
alHardwarePs1Voltage5v OBJECT-TYPE
SYNTAX Gauge32
UNITS "centivolts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current 5V voltage of Power Supply 1 in centivolts."
::= { alStatsHardwareGlobal 9 }
alHardwarePs1Voltage5vAlarm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alarm status for PS1 5v voltage. This alarm will fired when the
5v power supply 1 voltage is detected out of configured range."
::= { alStatsHardwareGlobal 10 }
alHardwarePs1Voltage5vCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of alarm events for PS1 5v voltage."
::= { alStatsHardwareGlobal 11 }
alHardwarePs1Voltage5vTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUptime at the time of the last change of alarm status for PS1
5v voltage."
::= { alStatsHardwareGlobal 12 }
alHardwarePs2Voltage3v OBJECT-TYPE
SYNTAX Gauge32
UNITS "centivolts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current 3V voltage of Power Supply 2 in centivolts."
::= { alStatsHardwareGlobal 13 }
alHardwarePs2Voltage3vAlarm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alarm status for PS2 3v voltage. This alarm will fired when the
3v power supply 2 voltage is detected out of configured range."
::= { alStatsHardwareGlobal 14 }
alHardwarePs2Voltage3vCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of alarm events for PS2 3v voltage."
::= { alStatsHardwareGlobal 15 }
alHardwarePs2Voltage3vTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUptime at the time of the last change of alarm status for PS2
3v voltage."
::= { alStatsHardwareGlobal 16 }
alHardwarePs2Voltage5v OBJECT-TYPE
SYNTAX Gauge32
UNITS "centivolts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current 5V voltage of Power Supply 2 in centivolts."
::= { alStatsHardwareGlobal 17 }
alHardwarePs2Voltage5vAlarm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alarm status for PS2 5v voltage. This alarm will fired when the
5v power supply 2 voltage is detected out of configured range."
::= { alStatsHardwareGlobal 18 }
alHardwarePs2Voltage5vCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of alarm events for PS2 5v voltage."
::= { alStatsHardwareGlobal 19 }
alHardwarePs2Voltage5vTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUptime at the time of the last change of alarm status for PS2
5v voltage."
::= { alStatsHardwareGlobal 20 }
alHardwareBoardVoltage3v OBJECT-TYPE
SYNTAX Gauge32
UNITS "centivolts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current 3V voltage of the mainboard in centivolts."
::= { alStatsHardwareGlobal 21 }
alHardwareBoardVoltage3vAlarm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alarm status for the mainboard 3v voltage. This alarm will fired
when the 3v mainboard voltage is detected out of configured range."
::= { alStatsHardwareGlobal 22 }
alHardwareBoardVoltage3vCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of alarm events for the mainboard 3v voltage."
::= { alStatsHardwareGlobal 23 }
alHardwareBoardVoltage3vTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUptime at the time of the last change of alarm status for the
mainboard 3v voltage."
::= { alStatsHardwareGlobal 24 }
alHardwareBoardVoltage5v OBJECT-TYPE
SYNTAX Gauge32
UNITS "centivolts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current 5V voltage of the mainboard in centivolts."
::= { alStatsHardwareGlobal 25 }
alHardwareBoardVoltage5vAlarm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alarm status for the mainboard 5v voltage. This alarm will fired
when the 5v mainboard voltage is detected out of configured range."
::= { alStatsHardwareGlobal 26 }
alHardwareBoardVoltage5vCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of alarm events for the mainboard 5v voltage."
::= { alStatsHardwareGlobal 27 }
alHardwareBoardVoltage5vTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUptime at the time of the last change of alarm status for the
mainboard 5v voltage."
::= { alStatsHardwareGlobal 28 }
alHardwareCpuTemp OBJECT-TYPE
SYNTAX Integer32 (-40..120)
UNITS "degrees Celsius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current CPU temperature in degrees C."
::= { alStatsHardwareGlobal 29 }
alHardwareCpuTempAlarm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alarm status for the CPU temperature. This alarm will fired
when the CPU temperature is detected out of configured range."
::= { alStatsHardwareGlobal 30 }
alHardwareCpuTempCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of alarm events for the CPU temperature."
::= { alStatsHardwareGlobal 31 }
alHardwareCpuTempTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUptime at the time of the last change of alarm status for the
CPU temperature."
::= { alStatsHardwareGlobal 32 }
alHardwareCageTemp OBJECT-TYPE
SYNTAX Integer32 (-40..120)
UNITS "degrees Celsius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current cage temperature in degrees C."
::= { alStatsHardwareGlobal 33 }
alHardwareCageTempAlarm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alarm status for the cage temperature. This alarm will fired
when the cage temperature is detected out of configured range."
::= { alStatsHardwareGlobal 34 }
alHardwareCageTempCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of alarm events for the cage temperature."
::= { alStatsHardwareGlobal 35 }
alHardwareCageTempTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUptime at the time of the last change of alarm status for the
cage temperature."
::= { alStatsHardwareGlobal 36 }
alHardwareFan1Rpm OBJECT-TYPE
SYNTAX Gauge32
UNITS "RPM"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current speed of fan 1 in RPM."
::= { alStatsHardwareGlobal 37 }
alHardwareFan1RpmAlarm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alarm status for fan 1 RPM. This alarm will fired when fan 1 RPM
is detected out of configured range."
::= { alStatsHardwareGlobal 38 }
alHardwareFan1RpmCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of alarm events for fan 1 RPM."
::= { alStatsHardwareGlobal 39 }
alHardwareFan1RpmTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUptime at the time of the last change of alarm status for
fan 1 RPM."
::= { alStatsHardwareGlobal 40 }
alHardwareFan2Rpm OBJECT-TYPE
SYNTAX Gauge32
UNITS "RPM"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current speed of fan 2 in RPM."
::= { alStatsHardwareGlobal 41 }
alHardwareFan2RpmAlarm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alarm status for fan 2 RPM. This alarm will fired when fan 2 RPM
is detected out of configured range."
::= { alStatsHardwareGlobal 42 }
alHardwareFan2RpmCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of alarm events for fan 2 RPM."
::= { alStatsHardwareGlobal 43 }
alHardwareFan2RpmTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUptime at the time of the last change of alarm status for
fan 2 RPM."
::= { alStatsHardwareGlobal 44 }
alHardwareFan3Rpm OBJECT-TYPE
SYNTAX Gauge32
UNITS "RPM"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current speed of fan 3 in RPM."
::= { alStatsHardwareGlobal 45 }
alHardwareFan3RpmAlarm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alarm status for fan 3 RPM. This alarm will fired when fan 3 RPM
is detected out of configured range."
::= { alStatsHardwareGlobal 46 }
alHardwareFan3RpmCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of alarm events for fan 3 RPM."
::= { alStatsHardwareGlobal 47 }
alHardwareFan3RpmTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUptime at the time of the last change of alarm status for
fan 3 RPM."
::= { alStatsHardwareGlobal 48 }
-- List of Current Hardware
alHardwarePs1Type OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no power supply detected in slot
ac(2) -- AC power supply detected in slot
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of power supply for Power Supply slot 1."
::= { alStatsHardwareGlobal 49 }
alHardwarePs2Type OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no power supply detected in slot
ac(2) -- AC power supply detected in slot
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of power supply for Power Supply slot 2."
::= { alStatsHardwareGlobal 50 }
alHardwareSlot1Card OBJECT-TYPE
SYNTAX ConcentratorCard
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of card in slot 1."
::= { alStatsHardwareGlobal 51 }
alHardwareSlot2Card OBJECT-TYPE
SYNTAX ConcentratorCard
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of card in slot 2."
::= { alStatsHardwareGlobal 52 }
alHardwareSlot3Card OBJECT-TYPE
SYNTAX ConcentratorCard
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of card in slot 3."
::= { alStatsHardwareGlobal 53 }
alHardwareSlot4Card OBJECT-TYPE
SYNTAX ConcentratorCard
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of card in slot 4."
::= { alStatsHardwareGlobal 54 }
alHardwareSlot1Operational OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of card in slot 1."
::= { alStatsHardwareGlobal 55 }
alHardwareSlot2Operational OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of card in slot 2."
::= { alStatsHardwareGlobal 56 }
alHardwareSlot3Operational OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of card in slot 3."
::= { alStatsHardwareGlobal 57 }
alHardwareSlot4Operational OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of card in slot 4."
::= { alStatsHardwareGlobal 58 }
alHardwareRamSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "MB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of memory, in MB on the concentrator."
::= { alStatsHardwareGlobal 59 }
alHardwareChassis OBJECT-TYPE
SYNTAX ConcentratorType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of VPN Concentrator this is."
::= { alStatsHardwareGlobal 60 }
alHardwareCpuVoltageNominal OBJECT-TYPE
SYNTAX Gauge32
UNITS "centivolts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The nominal CPU voltage in centivolts for the concentrator."
::= { alStatsHardwareGlobal 61 }
alHardwareClientEthPrivSwitch OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether or not the 3002 Hardware Client has an Ethernet Switch for
the private interface."
::= { alStatsHardwareGlobal 62 }
alHardwareSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit serial number."
::= { alStatsHardwareGlobal 63 }
altigaHardwareStatsMibConformance OBJECT IDENTIFIER
::= { altigaHardwareStatsMibModule 1 }
altigaHardwareStatsMibCompliances OBJECT IDENTIFIER
::= { altigaHardwareStatsMibConformance 1 }
altigaHardwareStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga Hardware Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaHardwareStatsGroup
}
::= { altigaHardwareStatsMibCompliances 1 }
altigaHardwareStatsGroup OBJECT-GROUP
OBJECTS
{
alHardwareCpuVoltage,
alHardwareCpuVoltageAlarm,
alHardwareCpuVoltageCount,
alHardwareCpuVoltageTime,
alHardwarePs1Voltage3v,
alHardwarePs1Voltage3vAlarm,
alHardwarePs1Voltage3vCount,
alHardwarePs1Voltage3vTime,
alHardwarePs1Voltage5v,
alHardwarePs1Voltage5vAlarm,
alHardwarePs1Voltage5vCount,
alHardwarePs1Voltage5vTime,
alHardwarePs2Voltage3v,
alHardwarePs2Voltage3vAlarm,
alHardwarePs2Voltage3vCount,
alHardwarePs2Voltage3vTime,
alHardwarePs2Voltage5v,
alHardwarePs2Voltage5vAlarm,
alHardwarePs2Voltage5vCount,
alHardwarePs2Voltage5vTime,
alHardwareBoardVoltage3v,
alHardwareBoardVoltage3vAlarm,
alHardwareBoardVoltage3vCount,
alHardwareBoardVoltage3vTime,
alHardwareBoardVoltage5v,
alHardwareBoardVoltage5vAlarm,
alHardwareBoardVoltage5vCount,
alHardwareBoardVoltage5vTime,
alHardwareCpuTemp,
alHardwareCpuTempAlarm,
alHardwareCpuTempCount,
alHardwareCpuTempTime,
alHardwareCageTemp,
alHardwareCageTempAlarm,
alHardwareCageTempCount,
alHardwareCageTempTime,
alHardwareFan1Rpm,
alHardwareFan1RpmAlarm,
alHardwareFan1RpmCount,
alHardwareFan1RpmTime,
alHardwareFan2Rpm,
alHardwareFan2RpmAlarm,
alHardwareFan2RpmCount,
alHardwareFan2RpmTime,
alHardwareFan3Rpm,
alHardwareFan3RpmAlarm,
alHardwareFan3RpmCount,
alHardwareFan3RpmTime,
alHardwarePs1Type,
alHardwarePs2Type,
alHardwareSlot1Card,
alHardwareSlot2Card,
alHardwareSlot3Card,
alHardwareSlot4Card,
alHardwareSlot1Operational,
alHardwareSlot2Operational,
alHardwareSlot3Operational,
alHardwareSlot4Operational,
alHardwareRamSize,
alHardwareChassis,
alHardwareCpuVoltageNominal,
alHardwareClientEthPrivSwitch,
alHardwareSerialNumber
}
STATUS current
DESCRIPTION
"The objects for Hardware statistics."
::= { alHardwareGroup 2 }
END

336
snmp_mib_archive/ALTIGA-HTTP-STATS-MIB.my 2
View File

@ -1,336 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-HTTP-STATS-MIB.my: Altiga HTTP Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-HTTP-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, Unsigned32,
IpAddress, Integer32, TimeTicks
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC
EncryptionAlgorithm
FROM ALTIGA-SESSION-STATS-MIB
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsHttp, alHttpGroup
FROM ALTIGA-MIB
alHttpMibModule
FROM ALTIGA-GLOBAL-REG;
altigaHttpStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga HTTP Statistics MIB models counters and objects that are
of management interest for HTTP.
Acronyms
The following acronyms are used in this document:
HTTP: HyperText Transfer Protocol
MIB: Management Information Base
TCP: Transmission Control Protocol
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alHttpMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsHttpGlobal OBJECT IDENTIFIER ::= { alStatsHttp 1 }
alHttpStatsOctetsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets sent."
::= { alStatsHttpGlobal 1 }
alHttpStatsOctetsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets received."
::= { alStatsHttpGlobal 2 }
alHttpStatsPacketsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets."
::= { alStatsHttpGlobal 3 }
alHttpStatsPacketsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received."
::= { alStatsHttpGlobal 4 }
alHttpStatsActiveConnections OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of active TCP connections."
::= { alStatsHttpGlobal 5 }
alHttpStatsMaxConnections OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of active TCP connections that existed at one any time."
::= { alStatsHttpGlobal 6 }
alHttpStatsActiveSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of active sessions."
::= { alStatsHttpGlobal 7 }
alHttpStatsMaxSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of active sessions that existed at one any time."
::= { alStatsHttpGlobal 8 }
alHttpStatsTotalConnections OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of TCP connections established."
::= { alStatsHttpGlobal 9 }
alHttpStatsTotalSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of sessions established."
::= { alStatsHttpGlobal 10 }
alHttpStatsSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlHttpStatsSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of active HTTP sessions."
::= { alStatsHttp 2 }
alHttpStatsSessionEntry OBJECT-TYPE
SYNTAX AlHttpStatsSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alHttpStatsSessionTable."
INDEX { alHttpStatsSessionIndex }
::= { alHttpStatsSessionTable 1 }
AlHttpStatsSessionEntry ::= SEQUENCE {
alHttpStatsSessionIndex Integer32,
alHttpStatsSessionName DisplayString,
alHttpStatsSessionIpAddr IpAddress,
alHttpStatsSessionStartTime TimeTicks,
alHttpStatsSessionLoginTime Unsigned32,
alHttpStatsSessionEncr EncryptionAlgorithm,
alHttpStatsSessionOctetsSent Counter32,
alHttpStatsSessionOctetsRcvd Counter32,
alHttpStatsSessionPacketsSent Counter32,
alHttpStatsSessionPacketsRcvd Counter32,
alHttpStatsSessionActiveConnections Gauge32,
alHttpStatsSessionMaxConnections Counter32,
alHttpStatsSessionTotalConnections Counter32
}
alHttpStatsSessionIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of this session."
::= { alHttpStatsSessionEntry 1 }
alHttpStatsSessionName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the administrator using this session."
::= { alHttpStatsSessionEntry 2 }
alHttpStatsSessionIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote IP address of this session.."
::= { alHttpStatsSessionEntry 3 }
alHttpStatsSessionStartTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Login time of this session."
::= { alHttpStatsSessionEntry 4 }
alHttpStatsSessionLoginTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"time_t value of the concentrator at the start of this session."
::= { alHttpStatsSessionEntry 5 }
alHttpStatsSessionEncr OBJECT-TYPE
SYNTAX EncryptionAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of encryption algorithm used for this session."
::= { alHttpStatsSessionEntry 6 }
alHttpStatsSessionOctetsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets sent during this session."
::= { alHttpStatsSessionEntry 7 }
alHttpStatsSessionOctetsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received during this session."
::= { alHttpStatsSessionEntry 8 }
alHttpStatsSessionPacketsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets sent during this session."
::= { alHttpStatsSessionEntry 9 }
alHttpStatsSessionPacketsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets received during this session."
::= { alHttpStatsSessionEntry 10 }
alHttpStatsSessionActiveConnections OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of active TCP connections for this session."
::= { alHttpStatsSessionEntry 11 }
alHttpStatsSessionMaxConnections OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of active TCP connections for this
session at any one time."
::= { alHttpStatsSessionEntry 12 }
alHttpStatsSessionTotalConnections OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of TCP connections for this session."
::= { alHttpStatsSessionEntry 13 }
altigaHttpStatsMibConformance OBJECT IDENTIFIER ::= { altigaHttpStatsMibModule 1 }
altigaHttpStatsMibCompliances OBJECT IDENTIFIER ::= { altigaHttpStatsMibConformance 1 }
altigaHttpStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga HTTP Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaHttpStatsGroup
}
::= { altigaHttpStatsMibCompliances 1 }
altigaHttpStatsGroup OBJECT-GROUP
OBJECTS
{
alHttpStatsOctetsSent,
alHttpStatsOctetsRcvd,
alHttpStatsPacketsSent,
alHttpStatsPacketsRcvd,
alHttpStatsActiveConnections,
alHttpStatsMaxConnections,
alHttpStatsActiveSessions,
alHttpStatsMaxSessions,
alHttpStatsTotalConnections,
alHttpStatsTotalSessions,
alHttpStatsSessionIndex,
alHttpStatsSessionName,
alHttpStatsSessionIpAddr,
alHttpStatsSessionStartTime,
alHttpStatsSessionLoginTime,
alHttpStatsSessionEncr,
alHttpStatsSessionOctetsSent,
alHttpStatsSessionOctetsRcvd,
alHttpStatsSessionPacketsSent,
alHttpStatsSessionPacketsRcvd,
alHttpStatsSessionActiveConnections,
alHttpStatsSessionMaxConnections,
alHttpStatsSessionTotalConnections
}
STATUS current
DESCRIPTION
"The objects for HTTP statistics."
::= { alHttpGroup 2 }
END

132
snmp_mib_archive/ALTIGA-IP-STATS-MIB.my 2
View File

@ -1,132 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-IP-STATS-MIB.my: Altiga IP Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-IP-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32
FROM SNMPv2-SMI
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsIp, alIpGroup
FROM ALTIGA-MIB
alIpMibModule
FROM ALTIGA-GLOBAL-REG;
altigaIpStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga IP Statistics MIB models counters and objects that are
of management interest for IP.
Acronyms
The following acronyms are used in this document:
IP: Internet Protocol
LAN: Local-Area Network
MIB: Management Information Base
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alIpMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsIpGlobal OBJECT IDENTIFIER ::= { alStatsIp 1 }
alIpInterfaceStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlIpInterfaceStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP Interface Statistics table."
::= { alStatsIpGlobal 1 }
alIpInterfaceStatsEntry OBJECT-TYPE
SYNTAX AlIpInterfaceStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alIpInterfaceStatsTable."
INDEX { alIpInterfaceStatsIndex }
::= { alIpInterfaceStatsTable 1 }
AlIpInterfaceStatsEntry ::= SEQUENCE {
alIpInterfaceStatsIndex Integer32,
alIpInterfaceStatsCurrentDuplex INTEGER
}
alIpInterfaceStatsIndex OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of this row."
::= { alIpInterfaceStatsEntry 1 }
alIpInterfaceStatsCurrentDuplex OBJECT-TYPE
SYNTAX INTEGER {
full(2),
half(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current LAN duplex mode for this interface."
::= { alIpInterfaceStatsEntry 2 }
altigaIpStatsMibConformance OBJECT IDENTIFIER ::= { altigaIpStatsMibModule 1 }
altigaIpStatsMibCompliances OBJECT IDENTIFIER ::= { altigaIpStatsMibConformance 1 }
altigaIpStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga IP Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaIpStatsGroup
}
::= { altigaIpStatsMibCompliances 1 }
altigaIpStatsGroup OBJECT-GROUP
OBJECTS
{
alIpInterfaceStatsIndex,
alIpInterfaceStatsCurrentDuplex
}
STATUS current
DESCRIPTION
"The objects for Ip Statistics."
::= { alIpGroup 2 }
END

1318
snmp_mib_archive/ALTIGA-L2TP-STATS-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

309
snmp_mib_archive/ALTIGA-LBSSF-STATS-MIB.my 2
View File

@ -1,309 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-LBSSF-STATS-MIB.my:
-- * Altiga Load Balancing and Secure Session Failover Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-LBSSF-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, TimeTicks, Integer32, Gauge32,
IpAddress
FROM SNMPv2-SMI
TruthValue, RowStatus, TEXTUAL-CONVENTION
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsLBSSF, alLBSSFGroup
FROM ALTIGA-MIB
alLBSSFMibModule
FROM ALTIGA-GLOBAL-REG;
altigaLBSSFStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga Load Balancing and Secure Session Failover
Statistics MIB models counters and objects that are of
management interest for LBSSF.
Acronyms
The following acronyms are used in this document:
LBSSF: Load Balancing and Secure Session Failover
MIB: Management Information Base
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alLBSSFMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
DeviceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"LBSSF Device Type."
SYNTAX INTEGER {
unknown(1),
vpn3005(3),
vpn3015(4),
vpn3030(5),
vpn3060(6),
vpn3080(7),
vpn3002(8)
}
DeviceRole ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Load balancing device roles within a LBSSF cluster.
virtualMaster: master of load balancing cluster
slave : slave in load balancing cluster
"
SYNTAX INTEGER {
virtualMaster(1),
slave(2)
}
alStatsLBSSFGlobal OBJECT IDENTIFIER ::= { alStatsLBSSF 1 }
alLBSSFRole OBJECT-TYPE
SYNTAX DeviceRole
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The role of this device."
::= { alStatsLBSSFGlobal 1 }
alLBSSFDeviceType OBJECT-TYPE
SYNTAX DeviceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device type of this device."
::= { alStatsLBSSFGlobal 2 }
alLBSSFActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if device is active or not."
::= { alStatsLBSSFGlobal 3 }
alLBSSFNumberOfPeers OBJECT-TYPE
SYNTAX Gauge32 (0..25)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of total current peers."
::= { alStatsLBSSFGlobal 4 }
alLBSSFLoad OBJECT-TYPE
SYNTAX Gauge32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current calculated load of this device in percentage."
::= { alStatsLBSSFGlobal 5 }
alLBSSFPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlLBSSFPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of LBSSF peers within a LBSSF cluster."
::= { alStatsLBSSF 2 }
alLBSSFPeerEntry OBJECT-TYPE
SYNTAX AlLBSSFPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alLBSSFStatsPeerTable."
INDEX { alLBSSFPeerPrivIpAddress }
::= { alLBSSFPeerTable 1 }
AlLBSSFPeerEntry ::= SEQUENCE {
alLBSSFPeerRowStatus RowStatus,
alLBSSFPeerPrivIpAddress IpAddress,
alLBSSFPeerPubIpAddress IpAddress,
alLBSSFPeerMappedPubIpAddress IpAddress,
alLBSSFPeerActive TruthValue,
alLBSSFPeerFaultZone Integer32,
alLBSSFPeerRole DeviceRole,
alLBSSFPeerDeviceType DeviceType,
alLBSSFPeerLoad Gauge32,
alLBSSFPeerPriority Integer32,
alLBSSFPeerActiveSessions Gauge32,
alLBSSFPeerJoinTime TimeTicks
}
alLBSSFPeerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this row."
::= { alLBSSFPeerEntry 1 }
alLBSSFPeerPrivIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Private LAN Ip address of this peer entry."
::= { alLBSSFPeerEntry 2 }
alLBSSFPeerPubIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Public LAN Ip address of this peer entry."
::= { alLBSSFPeerEntry 3 }
alLBSSFPeerMappedPubIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NAT'ed Public Ip address of this peer entry."
::= { alLBSSFPeerEntry 4 }
alLBSSFPeerActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if this peer is active or not."
::= { alLBSSFPeerEntry 5 }
alLBSSFPeerFaultZone OBJECT-TYPE
SYNTAX Integer32 (0..25)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates which fault zone this peer belongs."
::= { alLBSSFPeerEntry 6 }
alLBSSFPeerRole OBJECT-TYPE
SYNTAX DeviceRole
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Role of current peer"
::= { alLBSSFPeerEntry 7 }
alLBSSFPeerDeviceType OBJECT-TYPE
SYNTAX DeviceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device type of this peer."
::= { alLBSSFPeerEntry 8 }
alLBSSFPeerLoad OBJECT-TYPE
SYNTAX Gauge32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current load of the peer in percentage."
::= { alLBSSFPeerEntry 9 }
alLBSSFPeerPriority OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Priority of the peer."
::= { alLBSSFPeerEntry 10 }
alLBSSFPeerActiveSessions OBJECT-TYPE
SYNTAX Gauge32 (0..100000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of current active sessions on this peer"
::= { alLBSSFPeerEntry 11 }
alLBSSFPeerJoinTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time in time-ticks when this peer join the virtual cluster"
::= { alLBSSFPeerEntry 12 }
altigaLBSSFStatsMibConformance OBJECT IDENTIFIER
::= { altigaLBSSFStatsMibModule 1 }
altigaLBSSFStatsMibCompliances OBJECT IDENTIFIER
::= { altigaLBSSFStatsMibConformance 1 }
altigaLBSSFStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which implement the Altiga
Load Balancing and Secure Session Failover Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaStatsLBSSFGroup
}
::= { altigaLBSSFStatsMibCompliances 1 }
altigaStatsLBSSFGroup OBJECT-GROUP
OBJECTS
{
alLBSSFRole,
alLBSSFDeviceType,
alLBSSFActive,
alLBSSFNumberOfPeers,
alLBSSFLoad,
alLBSSFPeerRowStatus,
alLBSSFPeerPrivIpAddress,
alLBSSFPeerPubIpAddress,
alLBSSFPeerMappedPubIpAddress,
alLBSSFPeerActive,
alLBSSFPeerFaultZone,
alLBSSFPeerRole,
alLBSSFPeerDeviceType,
alLBSSFPeerLoad,
alLBSSFPeerPriority,
alLBSSFPeerActiveSessions,
alLBSSFPeerJoinTime
}
STATUS current
DESCRIPTION
"The objects for the LBSSF statistics."
::= { alLBSSFGroup 3 }
END

344
snmp_mib_archive/ALTIGA-MIB.my 2
View File

@ -1,344 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-MIB.my: Altiga Generic MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002, 2003, 2004 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY
FROM SNMPv2-SMI
altigaGeneric, alMibModule
FROM ALTIGA-GLOBAL-REG;
altigaMibModule MODULE-IDENTITY
LAST-UPDATED "200412300000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga Generic MIB models counters and objects that are
of management interest.
Acronyms
The following acronyms are used in this document:
MIB: Management Information Base
OID: Object Identifier
"
REVISION "200412300000Z"
DESCRIPTION
"Added the new MIB OIDs(60 to 62)."
REVISION "200310200000Z"
DESCRIPTION
"Added the new MIB OIDs(53 to 59)."
REVISION "200304100000Z"
DESCRIPTION
"Added the new MIB OIDs(49 to 52)."
REVISION "200210110000Z"
DESCRIPTION
"Updated with new header."
::= { alMibModule 1 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
altigaMib OBJECT IDENTIFIER ::= { altigaGeneric 1 }
-- Conformance Area, these are used elsewhere
altigaConfs OBJECT IDENTIFIER ::= { altigaMib 1 }
altigaGroups OBJECT IDENTIFIER ::= { altigaConfs 1 }
altigaCompl OBJECT IDENTIFIER ::= { altigaConfs 2 }
-- Subtree for Statistics, config and events
altigaStats OBJECT IDENTIFIER ::= { altigaMib 2 }
altigaConfig OBJECT IDENTIFIER ::= { altigaMib 3 }
altigaEvents OBJECT IDENTIFIER ::= { altigaMib 4 }
--
-- Here each subsystem will have a branch. There should be a branch
-- under each category (Stats, Config and Events), even if there
-- are no plans to further define the branch. Each branch should
-- have the same OID.
--
-- Groups
alVersionGroup OBJECT IDENTIFIER ::= { altigaGroups 1 }
alAccessGroup OBJECT IDENTIFIER ::= { altigaGroups 2 }
alPptpGroup OBJECT IDENTIFIER ::= { altigaGroups 3 }
alEventGroup OBJECT IDENTIFIER ::= { altigaGroups 4 }
alAuthGroup OBJECT IDENTIFIER ::= { altigaGroups 5 }
alPppGroup OBJECT IDENTIFIER ::= { altigaGroups 6 }
alHttpGroup OBJECT IDENTIFIER ::= { altigaGroups 7 }
alIpGroup OBJECT IDENTIFIER ::= { altigaGroups 8 }
alFilterGroup OBJECT IDENTIFIER ::= { altigaGroups 9 }
alUserGroup OBJECT IDENTIFIER ::= { altigaGroups 10 }
alTelnetGroup OBJECT IDENTIFIER ::= { altigaGroups 11 }
alFtpGroup OBJECT IDENTIFIER ::= { altigaGroups 12 }
alTftpGroup OBJECT IDENTIFIER ::= { altigaGroups 13 }
alSnmpGroup OBJECT IDENTIFIER ::= { altigaGroups 14 }
alIpSecGroup OBJECT IDENTIFIER ::= { altigaGroups 15 }
alL2tpGroup OBJECT IDENTIFIER ::= { altigaGroups 16 }
alSessionGroup OBJECT IDENTIFIER ::= { altigaGroups 17 }
alDnsGroup OBJECT IDENTIFIER ::= { altigaGroups 18 }
alAddressGroup OBJECT IDENTIFIER ::= { altigaGroups 19 }
alDhcpGroup OBJECT IDENTIFIER ::= { altigaGroups 20 }
alWatchdogGroup OBJECT IDENTIFIER ::= { altigaGroups 21 }
alHardwareGroup OBJECT IDENTIFIER ::= { altigaGroups 22 }
alNatGroup OBJECT IDENTIFIER ::= { altigaGroups 23 }
alLan2LanGroup OBJECT IDENTIFIER ::= { altigaGroups 24 }
alGeneralGroup OBJECT IDENTIFIER ::= { altigaGroups 25 }
alSslGroup OBJECT IDENTIFIER ::= { altigaGroups 26 }
alCertGroup OBJECT IDENTIFIER ::= { altigaGroups 27 }
alNtpGroup OBJECT IDENTIFIER ::= { altigaGroups 28 }
alNetworkListGroup OBJECT IDENTIFIER ::= { altigaGroups 29 }
alSepGroup OBJECT IDENTIFIER ::= { altigaGroups 30 }
alIkeGroup OBJECT IDENTIFIER ::= { altigaGroups 31 }
alSyncGroup OBJECT IDENTIFIER ::= { altigaGroups 32 }
alT1E1Group OBJECT IDENTIFIER ::= { altigaGroups 33 }
alMultiLinkGroup OBJECT IDENTIFIER ::= { altigaGroups 34 }
alSshGroup OBJECT IDENTIFIER ::= { altigaGroups 35 }
alLBSSFGroup OBJECT IDENTIFIER ::= { altigaGroups 36 }
alDhcpServerGroup OBJECT IDENTIFIER ::= { altigaGroups 37 }
alAutoUpdateGroup OBJECT IDENTIFIER ::= { altigaGroups 38 }
alAdminAuthGroup OBJECT IDENTIFIER ::= { altigaGroups 39 }
alPPPoEGroup OBJECT IDENTIFIER ::= { altigaGroups 40 }
alXmlGroup OBJECT IDENTIFIER ::= { altigaGroups 41 }
alCtcpGroup OBJECT IDENTIFIER ::= { altigaGroups 42 }
alFwGroup OBJECT IDENTIFIER ::= { altigaGroups 43 }
alGroupMatchGroup OBJECT IDENTIFIER ::= { altigaGroups 44 }
alACEServerGroup OBJECT IDENTIFIER ::= { altigaGroups 45 }
alNatTGroup OBJECT IDENTIFIER ::= { altigaGroups 46 }
alBwMgmtGroup OBJECT IDENTIFIER ::= { altigaGroups 47 }
alIpSecPreFragGroup OBJECT IDENTIFIER ::= { altigaGroups 48 }
alFipsGroup OBJECT IDENTIFIER ::= { altigaGroups 49 }
alBackupL2LGroup OBJECT IDENTIFIER ::= { altigaGroups 50 }
alNotifyGroup OBJECT IDENTIFIER ::= { altigaGroups 51 }
alRebootStatusGroup OBJECT IDENTIFIER ::= { altigaGroups 52 }
alAuthorizationGroup OBJECT IDENTIFIER ::= { altigaGroups 53 }
alWebPortalGroup OBJECT IDENTIFIER ::= { altigaGroups 54 }
alWebEmailGroup OBJECT IDENTIFIER ::= { altigaGroups 55 }
alPortForwardGroup OBJECT IDENTIFIER ::= { altigaGroups 56 }
alRemoteServerGroup OBJECT IDENTIFIER ::= { altigaGroups 57 }
alWebvpnAclGroup OBJECT IDENTIFIER ::= { altigaGroups 58 }
alNbnsGroup OBJECT IDENTIFIER ::= { altigaGroups 59 }
alSecureDesktopGroup OBJECT IDENTIFIER ::= { altigaGroups 60 }
alSslTunnelClientGroup OBJECT IDENTIFIER ::= { altigaGroups 61 }
alNacGroup OBJECT IDENTIFIER ::= { altigaGroups 62 }
-- Statistics
alStatsVersion OBJECT IDENTIFIER ::= { altigaStats 1 }
alStatsAccess OBJECT IDENTIFIER ::= { altigaStats 2 }
alStatsPptp OBJECT IDENTIFIER ::= { altigaStats 3 }
alStatsEvent OBJECT IDENTIFIER ::= { altigaStats 4 }
alStatsAuth OBJECT IDENTIFIER ::= { altigaStats 5 }
alStatsPpp OBJECT IDENTIFIER ::= { altigaStats 6 }
alStatsHttp OBJECT IDENTIFIER ::= { altigaStats 7 }
alStatsIp OBJECT IDENTIFIER ::= { altigaStats 8 }
alStatsFilter OBJECT IDENTIFIER ::= { altigaStats 9 }
alStatsUser OBJECT IDENTIFIER ::= { altigaStats 10 }
alStatsTelnet OBJECT IDENTIFIER ::= { altigaStats 11 }
alStatsFtp OBJECT IDENTIFIER ::= { altigaStats 12 }
alStatsTftp OBJECT IDENTIFIER ::= { altigaStats 13 }
alStatsSnmp OBJECT IDENTIFIER ::= { altigaStats 14 }
alStatsIpSec OBJECT IDENTIFIER ::= { altigaStats 15 }
alStatsL2tp OBJECT IDENTIFIER ::= { altigaStats 16 }
alStatsSession OBJECT IDENTIFIER ::= { altigaStats 17 }
alStatsDns OBJECT IDENTIFIER ::= { altigaStats 18 }
alStatsAddress OBJECT IDENTIFIER ::= { altigaStats 19 }
alStatsDhcp OBJECT IDENTIFIER ::= { altigaStats 20 }
alStatsWatching OBJECT IDENTIFIER ::= { altigaStats 21 }
alStatsHardware OBJECT IDENTIFIER ::= { altigaStats 22 }
alStatsNat OBJECT IDENTIFIER ::= { altigaStats 23 }
alStatsLan2Lan OBJECT IDENTIFIER ::= { altigaStats 24 }
alStatsGeneral OBJECT IDENTIFIER ::= { altigaStats 25 }
alStatsSsl OBJECT IDENTIFIER ::= { altigaStats 26 }
alStatsCert OBJECT IDENTIFIER ::= { altigaStats 27 }
alStatsNtp OBJECT IDENTIFIER ::= { altigaStats 28 }
alStatsNetworkList OBJECT IDENTIFIER ::= { altigaStats 29 }
alStatsSep OBJECT IDENTIFIER ::= { altigaStats 30 }
alStatsIke OBJECT IDENTIFIER ::= { altigaStats 31 }
alStatsSync OBJECT IDENTIFIER ::= { altigaStats 32 }
alStatsT1E1 OBJECT IDENTIFIER ::= { altigaStats 33 }
alStatsMultiLink OBJECT IDENTIFIER ::= { altigaStats 34 }
alStatsSsh OBJECT IDENTIFIER ::= { altigaStats 35 }
alStatsLBSSF OBJECT IDENTIFIER ::= { altigaStats 36 }
alStatsDhcpServer OBJECT IDENTIFIER ::= { altigaStats 37 }
alStatsAutoUpdate OBJECT IDENTIFIER ::= { altigaStats 38 }
alAdminAuthStats OBJECT IDENTIFIER ::= { altigaStats 39 }
alStatsPPPoE OBJECT IDENTIFIER ::= { altigaStats 40 }
alXmlStats OBJECT IDENTIFIER ::= { altigaStats 41 }
alCtcpStats OBJECT IDENTIFIER ::= { altigaStats 42 }
alFwStats OBJECT IDENTIFIER ::= { altigaStats 43 }
alStatsGroupMatch OBJECT IDENTIFIER ::= { altigaStats 44 }
alACEServerStats OBJECT IDENTIFIER ::= { altigaStats 45 }
alNatTStats OBJECT IDENTIFIER ::= { altigaStats 46 }
alStatsBwMgmt OBJECT IDENTIFIER ::= { altigaStats 47 }
alIpSecPreFragStats OBJECT IDENTIFIER ::= { altigaStats 48 }
alStatsFips OBJECT IDENTIFIER ::= { altigaStats 49 }
alStatsBackupL2L OBJECT IDENTIFIER ::= { altigaStats 50 }
alStatsNotify OBJECT IDENTIFIER ::= { altigaStats 51 }
alStatsRebootStatus OBJECT IDENTIFIER ::= { altigaStats 52 }
alStatsAuthorization OBJECT IDENTIFIER ::= { altigaStats 53 }
alStatsWebPortal OBJECT IDENTIFIER ::= { altigaStats 54 }
alStatsWebEmail OBJECT IDENTIFIER ::= { altigaStats 55 }
alStatsPortForward OBJECT IDENTIFIER ::= { altigaStats 56 }
alStatsRemoteServer OBJECT IDENTIFIER ::= { altigaStats 57 }
alStatsWebvpnAcl OBJECT IDENTIFIER ::= { altigaStats 58 }
alStatsNbns OBJECT IDENTIFIER ::= { altigaStats 59 }
alStatsSecureDesktop OBJECT IDENTIFIER ::= { altigaStats 60 }
alStatsSslTunnelClient OBJECT IDENTIFIER ::= { altigaStats 61 }
alStatsNac OBJECT IDENTIFIER ::= { altigaStats 62 }
-- Configuration
alCfgVersion OBJECT IDENTIFIER ::= { altigaConfig 1 }
alCfgAccess OBJECT IDENTIFIER ::= { altigaConfig 2 }
alCfgPptp OBJECT IDENTIFIER ::= { altigaConfig 3 }
alCfgEvent OBJECT IDENTIFIER ::= { altigaConfig 4 }
alCfgAuth OBJECT IDENTIFIER ::= { altigaConfig 5 }
alCfgPpp OBJECT IDENTIFIER ::= { altigaConfig 6 }
alCfgHttp OBJECT IDENTIFIER ::= { altigaConfig 7 }
alCfgIp OBJECT IDENTIFIER ::= { altigaConfig 8 }
alCfgFilter OBJECT IDENTIFIER ::= { altigaConfig 9 }
alCfgUser OBJECT IDENTIFIER ::= { altigaConfig 10 }
alCfgTelnet OBJECT IDENTIFIER ::= { altigaConfig 11 }
alCfgFtp OBJECT IDENTIFIER ::= { altigaConfig 12 }
alCfgTftp OBJECT IDENTIFIER ::= { altigaConfig 13 }
alCfgSnmp OBJECT IDENTIFIER ::= { altigaConfig 14 }
alCfgIpSec OBJECT IDENTIFIER ::= { altigaConfig 15 }
alCfgL2tp OBJECT IDENTIFIER ::= { altigaConfig 16 }
alCfgSession OBJECT IDENTIFIER ::= { altigaConfig 17 }
alCfgDns OBJECT IDENTIFIER ::= { altigaConfig 18 }
alCfgAddress OBJECT IDENTIFIER ::= { altigaConfig 19 }
alCfgDhcp OBJECT IDENTIFIER ::= { altigaConfig 20 }
alCfgWatchdog OBJECT IDENTIFIER ::= { altigaConfig 21 }
alCfgHardware OBJECT IDENTIFIER ::= { altigaConfig 22 }
alCfgNat OBJECT IDENTIFIER ::= { altigaConfig 23 }
alCfgLan2Lan OBJECT IDENTIFIER ::= { altigaConfig 24 }
alCfgGeneral OBJECT IDENTIFIER ::= { altigaConfig 25 }
alCfgSsl OBJECT IDENTIFIER ::= { altigaConfig 26 }
alCfgCert OBJECT IDENTIFIER ::= { altigaConfig 27 }
alCfgNtp OBJECT IDENTIFIER ::= { altigaConfig 28 }
alCfgNetworkList OBJECT IDENTIFIER ::= { altigaConfig 29 }
alCfgSep OBJECT IDENTIFIER ::= { altigaConfig 30 }
alCfgIke OBJECT IDENTIFIER ::= { altigaConfig 31 }
alCfgSync OBJECT IDENTIFIER ::= { altigaConfig 32 }
alCfgT1E1 OBJECT IDENTIFIER ::= { altigaConfig 33 }
alCfgMultiLink OBJECT IDENTIFIER ::= { altigaConfig 34 }
alCfgSsh OBJECT IDENTIFIER ::= { altigaConfig 35 }
alCfgLBSSF OBJECT IDENTIFIER ::= { altigaConfig 36 }
alCfgDhcpServer OBJECT IDENTIFIER ::= { altigaConfig 37 }
alCfgAutoUpdate OBJECT IDENTIFIER ::= { altigaConfig 38 }
alCfgAdminAuth OBJECT IDENTIFIER ::= { altigaConfig 39 }
alCfgPPPoE OBJECT IDENTIFIER ::= { altigaConfig 40 }
alCfgXml OBJECT IDENTIFIER ::= { altigaConfig 41 }
alCfgCtcp OBJECT IDENTIFIER ::= { altigaConfig 42 }
alCfgFw OBJECT IDENTIFIER ::= { altigaConfig 43 }
alCfgGroupMatch OBJECT IDENTIFIER ::= { altigaConfig 44 }
alCfgACE OBJECT IDENTIFIER ::= { altigaConfig 45 }
alCfgNatT OBJECT IDENTIFIER ::= { altigaConfig 46 }
alCfgBwMgmt OBJECT IDENTIFIER ::= { altigaConfig 47 }
alCfgIpSecPreFrag OBJECT IDENTIFIER ::= { altigaConfig 48 }
alCfgFips OBJECT IDENTIFIER ::= { altigaConfig 49 }
alCfgBackupL2L OBJECT IDENTIFIER ::= { altigaConfig 50 }
alCfgNotify OBJECT IDENTIFIER ::= { altigaConfig 51 }
alCfgRebootStatus OBJECT IDENTIFIER ::= { altigaConfig 52 }
alCfgAuthorization OBJECT IDENTIFIER ::= { altigaConfig 53 }
alCfgWebPortal OBJECT IDENTIFIER ::= { altigaConfig 54 }
alCfgWebEmail OBJECT IDENTIFIER ::= { altigaConfig 55 }
alCfgPortForward OBJECT IDENTIFIER ::= { altigaConfig 56 }
alCfgRemoteServer OBJECT IDENTIFIER ::= { altigaConfig 57 }
alCfgWebvpnAcl OBJECT IDENTIFIER ::= { altigaConfig 58 }
alCfgNbns OBJECT IDENTIFIER ::= { altigaConfig 59 }
alCfgSecureDesktop OBJECT IDENTIFIER ::= { altigaConfig 60 }
alCfgSslTunnelClient OBJECT IDENTIFIER ::= { altigaConfig 61 }
alCfgNac OBJECT IDENTIFIER ::= { altigaConfig 62 }
-- Events
alEventsVersion OBJECT IDENTIFIER ::= { altigaEvents 1 }
alEventsAccess OBJECT IDENTIFIER ::= { altigaEvents 2 }
alEventsPptp OBJECT IDENTIFIER ::= { altigaEvents 3 }
alEventsEvent OBJECT IDENTIFIER ::= { altigaEvents 4 }
alEventsAuth OBJECT IDENTIFIER ::= { altigaEvents 5 }
alEventsPpp OBJECT IDENTIFIER ::= { altigaEvents 6 }
alEventsHttp OBJECT IDENTIFIER ::= { altigaEvents 7 }
alEventsIp OBJECT IDENTIFIER ::= { altigaEvents 8 }
alEventsFilter OBJECT IDENTIFIER ::= { altigaEvents 9 }
alEventsUser OBJECT IDENTIFIER ::= { altigaEvents 10 }
alEventsTelnet OBJECT IDENTIFIER ::= { altigaEvents 11 }
alEventsFtp OBJECT IDENTIFIER ::= { altigaEvents 12 }
alEventsTftp OBJECT IDENTIFIER ::= { altigaEvents 13 }
alEventsSnmp OBJECT IDENTIFIER ::= { altigaEvents 14 }
alEventsIpSec OBJECT IDENTIFIER ::= { altigaEvents 15 }
alEventsL2tp OBJECT IDENTIFIER ::= { altigaEvents 16 }
alEventsSession OBJECT IDENTIFIER ::= { altigaEvents 17 }
alEventsDns OBJECT IDENTIFIER ::= { altigaEvents 18 }
alEventsAddress OBJECT IDENTIFIER ::= { altigaEvents 19 }
alEventsDhcp OBJECT IDENTIFIER ::= { altigaEvents 20 }
alEventsWatchdog OBJECT IDENTIFIER ::= { altigaEvents 21 }
alEventsHardware OBJECT IDENTIFIER ::= { altigaEvents 22 }
alEventsNat OBJECT IDENTIFIER ::= { altigaEvents 23 }
alEventsLan2Lan OBJECT IDENTIFIER ::= { altigaEvents 24 }
alEventsGeneral OBJECT IDENTIFIER ::= { altigaEvents 25 }
alEventsSsl OBJECT IDENTIFIER ::= { altigaEvents 26 }
alEventsCert OBJECT IDENTIFIER ::= { altigaEvents 27 }
alEventsNtp OBJECT IDENTIFIER ::= { altigaEvents 28 }
alEventsNetworkList OBJECT IDENTIFIER ::= { altigaEvents 29 }
alEventsSep OBJECT IDENTIFIER ::= { altigaEvents 30 }
alEventsIke OBJECT IDENTIFIER ::= { altigaEvents 31 }
alEventsSync OBJECT IDENTIFIER ::= { altigaEvents 32 }
alEventsT1E1 OBJECT IDENTIFIER ::= { altigaEvents 33 }
alEventsMultiLink OBJECT IDENTIFIER ::= { altigaEvents 34 }
alEventsSsh OBJECT IDENTIFIER ::= { altigaEvents 35 }
alEventsLBSSF OBJECT IDENTIFIER ::= { altigaEvents 36 }
alEventsAutoUpdate OBJECT IDENTIFIER ::= { altigaEvents 38 }
alEventsAdminAuth OBJECT IDENTIFIER ::= { altigaEvents 39 }
alEventsPPPoE OBJECT IDENTIFIER ::= { altigaEvents 40 }
alEventXml OBJECT IDENTIFIER ::= { altigaEvents 41 }
alEventCtcp OBJECT IDENTIFIER ::= { altigaEvents 42 }
alEventFw OBJECT IDENTIFIER ::= { altigaEvents 43 }
alEventGroupMatch OBJECT IDENTIFIER ::= { altigaEvents 44 }
alEventACE OBJECT IDENTIFIER ::= { altigaEvents 45 }
alEventNatT OBJECT IDENTIFIER ::= { altigaEvents 46 }
alEventBwMgmt OBJECT IDENTIFIER ::= { altigaEvents 47 }
alEventIpSecPreFrag OBJECT IDENTIFIER ::= { altigaEvents 48 }
alEventFips OBJECT IDENTIFIER ::= { altigaEvents 49 }
alEventBackupL2L OBJECT IDENTIFIER ::= { altigaEvents 50 }
alEventsNotify OBJECT IDENTIFIER ::= { altigaEvents 51 }
alEventsRebootStatus OBJECT IDENTIFIER ::= { altigaEvents 52 }
alEventAuthorization OBJECT IDENTIFIER ::= { altigaEvents 53 }
alEventWebPortal OBJECT IDENTIFIER ::= { altigaEvents 54 }
alEventWebEmail OBJECT IDENTIFIER ::= { altigaEvents 55 }
alEventPortForward OBJECT IDENTIFIER ::= { altigaEvents 56 }
alEventRemoteServer OBJECT IDENTIFIER ::= { altigaEvents 57 }
alEventWebvpnAcl OBJECT IDENTIFIER ::= { altigaEvents 58 }
alEventNbns OBJECT IDENTIFIER ::= { altigaEvents 59 }
alEventSecureDesktop OBJECT IDENTIFIER ::= { altigaEvents 60 }
alEventSslTunnelClient OBJECT IDENTIFIER ::= { altigaEvents 61 }
alEventNac OBJECT IDENTIFIER ::= { altigaEvents 62 }
END

313
snmp_mib_archive/ALTIGA-MULTILINK-STATS-MIB.my 2
View File

@ -1,313 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-MULTILINK-STATS-MIB.my: Altiga MultiLink Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-MULTILINK-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Gauge32
FROM SNMPv2-SMI
RowStatus
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsMultiLink, alMultiLinkGroup
FROM ALTIGA-MIB
alMultiLinkMibModule
FROM ALTIGA-GLOBAL-REG;
altigaMultiLinkStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga MultiLink Statistics MIB models counters and
objects that are of management interest for multilinks.
Acronyms
The following acronyms are used in this document:
MIB: Management Information Base
MLP: MultiLink Protocol
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alMultiLinkMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsMultiLinkGlobal OBJECT IDENTIFIER ::= { alStatsMultiLink 1 }
alMultiLinkStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlMultiLinkStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of active bundles sessions."
::= { alStatsMultiLink 2 }
alMultiLinkStatsEntry OBJECT-TYPE
SYNTAX AlMultiLinkStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alMultiLinkStatsTable."
INDEX { alMultiLinkStatsIndex }
::= { alMultiLinkStatsTable 1 }
AlMultiLinkStatsEntry ::= SEQUENCE {
alMultiLinkStatsRowStatus RowStatus,
alMultiLinkStatsIndex Integer32,
alMultiLinkStatsTxOctets Unsigned32,
alMultiLinkStatsTxPackets Unsigned32,
alMultiLinkStatsTxMlpFragments Unsigned32,
alMultiLinkStatsTxMlpPackets Unsigned32,
alMultiLinkStatsTxNonMlpPackets Unsigned32,
alMultiLinkStatsTxThroughput Gauge32,
alMultiLinkStatsRxOctets Unsigned32,
alMultiLinkStatsRxPackets Unsigned32,
alMultiLinkStatsRxMlpFragments Unsigned32,
alMultiLinkStatsRxMlpPackets Unsigned32,
alMultiLinkStatsRxNonMlpPackets Unsigned32,
alMultiLinkStatsRxThroughput Gauge32,
alMultiLinkStatsRxLostEnd Unsigned32,
alMultiLinkStatsRxStalePackets Unsigned32,
alMultiLinkStatsRxStaleFragments Unsigned32,
alMultiLinkStatsRxDroppedFragments Unsigned32,
alMultiLinkStatsRxOOSFragments Unsigned32,
alMultiLinkStatsIdleTmrCleanup Unsigned32
}
alMultiLinkStatsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row."
::= { alMultiLinkStatsEntry 1 }
alMultiLinkStatsIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique MultiLink Bundle index for this row."
::= { alMultiLinkStatsEntry 2 }
alMultiLinkStatsTxOctets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted octets."
::= { alMultiLinkStatsEntry 3 }
alMultiLinkStatsTxPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted packets."
::= { alMultiLinkStatsEntry 4 }
alMultiLinkStatsTxMlpFragments OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted MLP packet fragments."
::= { alMultiLinkStatsEntry 5 }
alMultiLinkStatsTxMlpPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted MLP complete packets."
::= { alMultiLinkStatsEntry 6 }
alMultiLinkStatsTxNonMlpPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted non-MLP complete packets."
::= { alMultiLinkStatsEntry 7 }
alMultiLinkStatsTxThroughput OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted bits per second"
::= { alMultiLinkStatsEntry 8 }
alMultiLinkStatsRxOctets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received octets."
::= { alMultiLinkStatsEntry 9 }
alMultiLinkStatsRxPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received packets."
::= { alMultiLinkStatsEntry 10 }
alMultiLinkStatsRxMlpFragments OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received MLP packet fragments."
::= { alMultiLinkStatsEntry 11 }
alMultiLinkStatsRxMlpPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received MLP complete packets."
::= { alMultiLinkStatsEntry 12 }
alMultiLinkStatsRxNonMlpPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received non-MLP complete packets."
::= { alMultiLinkStatsEntry 13 }
alMultiLinkStatsRxThroughput OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received bits per second"
::= { alMultiLinkStatsEntry 14 }
alMultiLinkStatsRxLostEnd OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of missing MLP packets with no end bit."
::= { alMultiLinkStatsEntry 15 }
alMultiLinkStatsRxStalePackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received MLP packet fragments gone stale."
::= { alMultiLinkStatsEntry 16 }
alMultiLinkStatsRxStaleFragments OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received MLP fragments orphans gone stale."
::= { alMultiLinkStatsEntry 17 }
alMultiLinkStatsRxDroppedFragments OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received MLP packet fragments discarded."
::= { alMultiLinkStatsEntry 18 }
alMultiLinkStatsRxOOSFragments OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received out-of-sequence MLP packet fragments"
::= { alMultiLinkStatsEntry 19 }
alMultiLinkStatsIdleTmrCleanup OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times idle timer forwarded MLP complete packets."
::= { alMultiLinkStatsEntry 20 }
altigaMultiLinkStatsMibConformance OBJECT IDENTIFIER
::= { altigaMultiLinkStatsMibModule 1 }
altigaMultiLinkStatsMibCompliances OBJECT IDENTIFIER
::= { altigaMultiLinkStatsMibConformance 1 }
altigaMultiLinkStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga MultiLink Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaMultiLinkStatsGroup
}
::= { altigaMultiLinkStatsMibCompliances 1 }
altigaMultiLinkStatsGroup OBJECT-GROUP
OBJECTS
{
alMultiLinkStatsRowStatus,
alMultiLinkStatsIndex,
alMultiLinkStatsTxOctets,
alMultiLinkStatsTxPackets,
alMultiLinkStatsTxMlpFragments,
alMultiLinkStatsTxMlpPackets,
alMultiLinkStatsTxNonMlpPackets,
alMultiLinkStatsTxThroughput,
alMultiLinkStatsRxOctets,
alMultiLinkStatsRxPackets,
alMultiLinkStatsRxMlpFragments,
alMultiLinkStatsRxMlpPackets,
alMultiLinkStatsRxNonMlpPackets,
alMultiLinkStatsRxThroughput,
alMultiLinkStatsRxLostEnd,
alMultiLinkStatsRxStalePackets,
alMultiLinkStatsRxStaleFragments,
alMultiLinkStatsRxDroppedFragments,
alMultiLinkStatsRxOOSFragments,
alMultiLinkStatsIdleTmrCleanup
}
STATUS current
DESCRIPTION
"The objects for the MultiLink Bundle statistics."
::= { alMultiLinkGroup 2 }
END

437
snmp_mib_archive/ALTIGA-NAT-STATS-MIB.my 2
View File

@ -1,437 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-NAT-STATS-MIB.my: Altiga NAT Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-NAT-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Integer32, Counter32, Unsigned32
FROM SNMPv2-SMI
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsNat, alNatGroup
FROM ALTIGA-MIB
alNatMibModule
FROM ALTIGA-GLOBAL-REG;
altigaNatStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga NAT Statistics MIB models counters and objects that are
of management interest for NAT.
Acronyms
The following acronyms are used in this document:
MIB: Management Information Base
NAT: Network Address Translation
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alNatMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsNatGlobal OBJECT IDENTIFIER ::= { alStatsNat 1 }
alNatStatsPacketsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of inbound packets that have been translated."
::= { alStatsNatGlobal 1 }
alNatStatsPacketsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of outbound packets that have been translated."
::= { alStatsNatGlobal 2 }
alNatStatsTotalTranslations OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of sessions that have been established."
::= { alStatsNatGlobal 3 }
alNatStatsActiveTranslations OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active number of sessions that are established."
::= { alStatsNatGlobal 4 }
alNatStatsMaxTranslations OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of sessions that have been established at any one time."
::= { alStatsNatGlobal 5 }
alNatTranslationTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlNatTranslationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of active NAT sessions."
::= { alStatsNat 2 }
alNatTranslationEntry OBJECT-TYPE
SYNTAX AlNatTranslationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alNatTranslationTable."
INDEX { alNatTranslationSrcAddress,
alNatTranslationSrcPort,
alNatTranslationDestAddress,
alNatTranslationDestPort}
::= { alNatTranslationTable 1 }
AlNatTranslationEntry ::= SEQUENCE {
alNatTranslationSrcAddress IpAddress,
alNatTranslationSrcPort Integer32,
alNatTranslationDestAddress IpAddress,
alNatTranslationDestPort Integer32,
alNatTranslationAddress IpAddress,
alNatTranslationPort Integer32,
alNatTranslationAge Unsigned32,
alNatTranslationType INTEGER,
alNatTranslationDirection INTEGER,
alNatTranslationBytes Counter32,
alNatTranslationPackets Counter32
}
alNatTranslationSrcAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal source address to be translated."
::= { alNatTranslationEntry 1 }
alNatTranslationSrcPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal source port to be translated."
::= { alNatTranslationEntry 2 }
alNatTranslationDestAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The external destination address."
::= { alNatTranslationEntry 3 }
alNatTranslationDestPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The external destinatin port."
::= { alNatTranslationEntry 4 }
alNatTranslationAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The translated internal source address."
::= { alNatTranslationEntry 5 }
alNatTranslationPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The translated internal source port."
::= { alNatTranslationEntry 6 }
alNatTranslationAge OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The age of this entry in seconds."
::= { alNatTranslationEntry 7 }
alNatTranslationType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
portMapTcp (1),
portMapUdp (2),
portMapTcpUdp(3),
noPortMap (4),
ftpProxy (8),
tftpProxy (16),
nbnsTcpProxy (32),
nbnsUdpProxy (64),
nbdgsvcProxy (128),
h225TcpProxy (256),
h245Proxy(512),
rasProxy (1024),
ilsProxy (2048),
all(4095)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of this entry."
::= { alNatTranslationEntry 8 }
alNatTranslationDirection OBJECT-TYPE
SYNTAX INTEGER {
inbound (1),
outbound (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The direction that this rule acts upon."
::= { alNatTranslationEntry 9 }
alNatTranslationBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes that have been translated."
::= { alNatTranslationEntry 10 }
alNatTranslationPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that have been translated."
::= { alNatTranslationEntry 11 }
alNatAllTranslationTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlNatAllTranslationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of active NAT sessions."
::= { alStatsNat 3 }
alNatAllTranslationEntry OBJECT-TYPE
SYNTAX AlNatAllTranslationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alNatAllTranslationTable."
INDEX { alNatAllTranslationSrcAddress,
alNatAllTranslationSrcPort,
alNatAllTranslationDestAddress,
alNatAllTranslationDestPort,
alNatAllTranslationType }
::= { alNatAllTranslationTable 1 }
AlNatAllTranslationEntry ::= SEQUENCE {
alNatAllTranslationSrcAddress IpAddress,
alNatAllTranslationSrcPort Integer32,
alNatAllTranslationDestAddress IpAddress,
alNatAllTranslationDestPort Integer32,
alNatAllTranslationAddress IpAddress,
alNatAllTranslationPort Integer32,
alNatAllTranslationAge Unsigned32,
alNatAllTranslationType INTEGER,
alNatAllTranslationDirection INTEGER,
alNatAllTranslationBytes Counter32,
alNatAllTranslationPackets Counter32
}
alNatAllTranslationSrcAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal source address to be translated."
::= { alNatAllTranslationEntry 1 }
alNatAllTranslationSrcPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal source port to be translated."
::= { alNatAllTranslationEntry 2 }
alNatAllTranslationDestAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The external destination address."
::= { alNatAllTranslationEntry 3 }
alNatAllTranslationDestPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The external destinatin port."
::= { alNatAllTranslationEntry 4 }
alNatAllTranslationAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The translated internal source address."
::= { alNatAllTranslationEntry 5 }
alNatAllTranslationPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The translated internal source port."
::= { alNatAllTranslationEntry 6 }
alNatAllTranslationAge OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The age of this entry in seconds."
::= { alNatAllTranslationEntry 7 }
alNatAllTranslationType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
portMapTcp (1),
portMapUdp (2),
portMapTcpUdp(3),
noPortMap (4),
ftpProxy (8),
tftpProxy (16),
nbnsTcpProxy (32),
nbnsUdpProxy (64),
nbdgsvcProxy (128),
h225TcpProxy (256),
h245Proxy(512),
rasProxy (1024),
ilsProxy (2048),
all(4095)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of this entry."
::= { alNatAllTranslationEntry 8 }
alNatAllTranslationDirection OBJECT-TYPE
SYNTAX INTEGER {
inbound (1),
outbound (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The direction that this rule acts upon."
::= { alNatAllTranslationEntry 9 }
alNatAllTranslationBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes that have been translated."
::= { alNatAllTranslationEntry 10 }
alNatAllTranslationPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that have been translated."
::= { alNatAllTranslationEntry 11 }
altigaNatStatsMibConformance OBJECT IDENTIFIER ::= { altigaNatStatsMibModule 1 }
altigaNatStatsMibCompliances OBJECT IDENTIFIER ::= { altigaNatStatsMibConformance 1 }
altigaNatStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga NAT Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaNatStatsGroup
}
::= { altigaNatStatsMibCompliances 1 }
altigaNatStatsGroup OBJECT-GROUP
OBJECTS
{
alNatStatsPacketsIn,
alNatStatsPacketsOut,
alNatStatsTotalTranslations,
alNatStatsActiveTranslations,
alNatStatsMaxTranslations,
alNatTranslationSrcAddress,
alNatTranslationSrcPort,
alNatTranslationDestAddress,
alNatTranslationDestPort,
alNatTranslationAddress,
alNatTranslationPort,
alNatTranslationAge,
alNatTranslationType,
alNatTranslationDirection,
alNatTranslationBytes,
alNatTranslationPackets,
alNatAllTranslationSrcAddress,
alNatAllTranslationSrcPort,
alNatAllTranslationDestAddress,
alNatAllTranslationDestPort,
alNatAllTranslationAddress,
alNatAllTranslationPort,
alNatAllTranslationAge,
alNatAllTranslationType,
alNatAllTranslationDirection,
alNatAllTranslationBytes,
alNatAllTranslationPackets
}
STATUS current
DESCRIPTION
"The objects for NAT statistics"
::= { alNatGroup 2 }
END

341
snmp_mib_archive/ALTIGA-PPP-STATS-MIB.my 2
View File

@ -1,341 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-PPP-STATS-MIB.my: Altiga PPP Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-PPP-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32
FROM SNMPv2-SMI
TruthValue, RowStatus
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsPpp, alPppGroup
FROM ALTIGA-MIB
alPppMibModule
FROM ALTIGA-GLOBAL-REG;
altigaPppStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga PPP Statistics MIB models counters and objects that are
of management interest for PPP.
Acronyms
The following acronyms are used in this document:
MIB: Management Information Base
MPPC: Microsoft Point-to-Point Compression
MPPE: Microsoft Point-to-Point Encryption
PPP: Point-to-Point Protocol
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance and range."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alPppMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsPppGlobal OBJECT IDENTIFIER ::= { alStatsPpp 1 }
-- Any global stuff here...
alPppStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlPppStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of active PPP links."
::= { alStatsPpp 2 }
alPppStatsEntry OBJECT-TYPE
SYNTAX AlPppStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alPppStatsTable."
INDEX { alPppStatsIfIndex }
::= { alPppStatsTable 1 }
AlPppStatsEntry ::= SEQUENCE {
alPppStatsRowStatus RowStatus,
alPppStatsIfIndex Integer32,
alPppStatsOctetsSent Counter32,
alPppStatsOctetsRcvd Counter32,
alPppStatsPacketsSent Counter32,
alPppStatsPacketsRcvd Counter32,
alPppStatsMppcStatus TruthValue,
alPppStatsMppeStatus TruthValue,
alPppStatsMppcMppeReset Counter32,
alPppStatsMppcOctSentAfterComp Counter32,
alPppStatsMppcOctSentBeforeComp Counter32,
alPppStatsMppcOctSentUnComp Counter32,
alPppStatsMppcOctRcvdBeforeDeComp Counter32,
alPppStatsMppcOctRcvdAfterDeComp Counter32,
alPppStatsMppcOctRcvdUnComp Counter32
}
alPppStatsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row. Used to terminate the session."
::= { alPppStatsEntry 1 }
alPppStatsIfIndex OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of this row."
::= { alPppStatsEntry 2 }
alPppStatsOctetsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets sent during this session."
::= { alPppStatsEntry 3 }
alPppStatsOctetsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets received during this session."
::= { alPppStatsEntry 4 }
alPppStatsPacketsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets sent during this session."
::= { alPppStatsEntry 5 }
alPppStatsPacketsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received during this session."
::= { alPppStatsEntry 6 }
alPppStatsMppcStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the MPPC setting during this session."
::= { alPppStatsEntry 7 }
alPppStatsMppeStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the MPPE setting during this session."
::= { alPppStatsEntry 8 }
alPppStatsMppcMppeReset OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reset MPPC and MPPE counts for this session."
::= { alPppStatsEntry 9 }
alPppStatsMppcOctSentAfterComp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets sent after compression during this session."
::= { alPppStatsEntry 10 }
alPppStatsMppcOctSentBeforeComp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets sent before compression during this session."
::= { alPppStatsEntry 11 }
alPppStatsMppcOctSentUnComp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets sent uncompressed during this session."
::= { alPppStatsEntry 12 }
alPppStatsMppcOctRcvdBeforeDeComp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets received before decompression during this session."
::= { alPppStatsEntry 13 }
alPppStatsMppcOctRcvdAfterDeComp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets received after decompression during this session."
::= { alPppStatsEntry 14 }
alPppStatsMppcOctRcvdUnComp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets received uncompressed during this session."
::= { alPppStatsEntry 15 }
-- More Tunnel stuff here.
alStatsPppMppcGlobal OBJECT IDENTIFIER ::= { alStatsPpp 3 }
alPppStatsGlobMppcMppeResetsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reset the number of octets received."
::= { alStatsPppMppcGlobal 1 }
alPppStatsGlobMppcMppeResetsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reset the number of octets sent."
::= { alStatsPppMppcGlobal 2 }
alPppStatsGlobMppcOctSentAfterComp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of octets sent after compression."
::= { alStatsPppMppcGlobal 3 }
alPppStatsGlobMppcOctSentBeforeComp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of octets sent before compression."
::= { alStatsPppMppcGlobal 4 }
alPppStatsGlobMppcOctSentUnComp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of octets sent uncompressed."
::= { alStatsPppMppcGlobal 5 }
alPppStatsGlobMppcOctRcvdBeforeDeComp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of octets received before decompression."
::= { alStatsPppMppcGlobal 6 }
alPppStatsGlobMppcOctRcvdAfterDeComp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of octets received after decompression."
::= { alStatsPppMppcGlobal 7 }
alPppStatsGlobMppcOctRcvdUnComp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of octets received uncompressed."
::= { alStatsPppMppcGlobal 8 }
altigaPppStatsMibConformance OBJECT IDENTIFIER ::= { altigaPppStatsMibModule 1 }
altigaPppStatsMibCompliances OBJECT IDENTIFIER ::= { altigaPppStatsMibConformance 1 }
altigaPppStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga PPP Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaPppStatsGroup
}
::= { altigaPppStatsMibCompliances 1 }
altigaPppStatsGroup OBJECT-GROUP
OBJECTS
{
alPppStatsRowStatus,
alPppStatsIfIndex,
alPppStatsOctetsSent,
alPppStatsOctetsRcvd,
alPppStatsPacketsSent,
alPppStatsPacketsRcvd,
alPppStatsMppcStatus,
alPppStatsMppeStatus,
alPppStatsMppcMppeReset,
alPppStatsMppcOctSentAfterComp,
alPppStatsMppcOctSentBeforeComp,
alPppStatsMppcOctSentUnComp,
alPppStatsMppcOctRcvdBeforeDeComp,
alPppStatsMppcOctRcvdAfterDeComp,
alPppStatsMppcOctRcvdUnComp,
alPppStatsGlobMppcMppeResetsRcvd,
alPppStatsGlobMppcMppeResetsSent,
alPppStatsGlobMppcOctSentAfterComp,
alPppStatsGlobMppcOctSentBeforeComp,
alPppStatsGlobMppcOctSentUnComp,
alPppStatsGlobMppcOctRcvdBeforeDeComp,
alPppStatsGlobMppcOctRcvdAfterDeComp,
alPppStatsGlobMppcOctRcvdUnComp
}
STATUS current
DESCRIPTION
"The objects for PPP statistics."
::= { alPppGroup 2 }
END

357
snmp_mib_archive/ALTIGA-PPPOE-STATS-MIB.my 2
View File

@ -1,357 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-PPPOE-STATS-MIB.my: Altiga PPPoE Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002,2007 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-PPPOE-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32,
Gauge32, Unsigned32
FROM SNMPv2-SMI
DisplayString, MacAddress
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsPPPoE, alPPPoEGroup
FROM ALTIGA-MIB
alPPPoEMibModule
FROM ALTIGA-GLOBAL-REG;
altigaPPPoEStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200707110000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga PPPoE Statistics MIB models counters and objects that are
of management interest for PPPoE.
Acronyms
The following acronyms are used in this document:
MIB: Management Information Base
PADI: PPPoE Active Discovery Initiation
PADO: PPPoE Active Discovery Offer
PADS: PPPoE Active Discovery Session-confirmation
PADT: PPPoE Active Discovery Terminate
PPPoE: Point-to-Point Protocol over Ethernet
"
REVISION "200707110000Z"
DESCRIPTION
"Added range for Index Object alPPPoEStatsIfIndex object "
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alPPPoEMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsPPPoEGlobal OBJECT IDENTIFIER ::= { alStatsPPPoE 1 }
alPPPoEStatsActiveSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of active sessions on the interface
(currently should max at 1)."
::= { alStatsPPPoEGlobal 1 }
alPPPoEStatsTotalSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Sessions since last reset."
::= { alStatsPPPoEGlobal 2 }
alPPPoEStatsMaxSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak number of sessions since last reset."
::= { alStatsPPPoEGlobal 3 }
alPPPoEStatsIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlPPPoEStatsIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains the PPPoE binding entries for stats."
::= { alStatsPPPoE 2 }
alPPPoEStatsIfEntry OBJECT-TYPE
SYNTAX AlPPPoEStatsIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains the PPPoE entries for the status
binding table."
INDEX { alPPPoEStatsIfIndex }
::= { alPPPoEStatsIfTable 1 }
AlPPPoEStatsIfEntry ::= SEQUENCE {
alPPPoEStatsIfIndex Integer32,
alPPPoEStatsIfPADTRx Counter32,
alPPPoEStatsIfPADTTx Counter32,
alPPPoEStatsIfGenericErrorsRx Counter32,
alPPPoEStatsIfMalformedPacketsRx Counter32,
alPPPoEStatsIfPADITimeouts Counter32,
alPPPoEStatsIfPADRTimeouts Counter32,
alPPPoEStatsIfMultPADORx Counter32,
alPPPoEStatsIfSessionID Integer32,
alPPPoEStatsIfPeerAddr MacAddress,
alPPPoEStatsIfSessionState INTEGER,
alPPPoEStatsIfVersion Integer32,
alPPPoEStatsIfType Integer32,
alPPPoEStatsIfConnectTime Unsigned32,
alPPPoEStatsIfDuration Unsigned32,
alPPPoEStatsIfPeerName DisplayString,
alPPPoEStatsIfACCookie OCTET STRING,
alPPPoEStatsIfHostUnique OCTET STRING,
alPPPoEStatsIfRelaySessID OCTET STRING
}
alPPPoEStatsIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index for PPPoE status binding table."
::= { alPPPoEStatsIfEntry 1 }
alPPPoEStatsIfPADTRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of PADT received."
::= { alPPPoEStatsIfEntry 2 }
alPPPoEStatsIfPADTTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of PADT transmitted."
::= { alPPPoEStatsIfEntry 3 }
alPPPoEStatsIfGenericErrorsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Generic Errors Received."
::= { alPPPoEStatsIfEntry 4 }
alPPPoEStatsIfMalformedPacketsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of back packets received."
::= { alPPPoEStatsIfEntry 5 }
alPPPoEStatsIfPADITimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times timedout waiting for a PADO."
::= { alPPPoEStatsIfEntry 6 }
alPPPoEStatsIfPADRTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times timed out waiting for a PADS."
::= { alPPPoEStatsIfEntry 7 }
alPPPoEStatsIfMultPADORx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times we received more than 1 PADO."
::= { alPPPoEStatsIfEntry 8 }
alPPPoEStatsIfSessionID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Session ID given by the AC."
::= { alPPPoEStatsIfEntry 9 }
alPPPoEStatsIfPeerAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of the remote AC."
::= { alPPPoEStatsIfEntry 10 }
alPPPoEStatsIfSessionState OBJECT-TYPE
SYNTAX INTEGER {
noState(1),
pADISent(2),
pADIRcvd(3),
pADOSent(4),
pADORcvd(5),
pADRSent(6),
pADRRcvd(7),
pADSSent(8),
pADSRcvd(9),
sessionStage(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State that the session is in."
::= { alPPPoEStatsIfEntry 11 }
alPPPoEStatsIfVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Version as given in the PPPoE RFC."
::= { alPPPoEStatsIfEntry 12 }
alPPPoEStatsIfType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type as given in the PPPoE RFC."
::= { alPPPoEStatsIfEntry 13 }
alPPPoEStatsIfConnectTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time_t of when the session was established."
::= { alPPPoEStatsIfEntry 14 }
alPPPoEStatsIfDuration OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of seconds since the session was
established."
::= { alPPPoEStatsIfEntry 15 }
alPPPoEStatsIfPeerName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"UTF-8 string of the AC name."
::= { alPPPoEStatsIfEntry 16 }
alPPPoEStatsIfACCookie OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Binary sequence representing the AC cookie given in
negotiations."
::= { alPPPoEStatsIfEntry 17 }
alPPPoEStatsIfHostUnique OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Binary sequence representing the value we assigned the PADI."
::= { alPPPoEStatsIfEntry 18 }
alPPPoEStatsIfRelaySessID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"12 octets representing the Relay session if one exists."
::= { alPPPoEStatsIfEntry 19 }
altigaPPPoEStatsMibConformance OBJECT IDENTIFIER ::= { altigaPPPoEStatsMibModule 1 }
altigaPPPoEStatsMibCompliances OBJECT IDENTIFIER ::= { altigaPPPoEStatsMibConformance 1 }
altigaPPPoEStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga PPPoE Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaPPPoEStatsGroup
}
::= { altigaPPPoEStatsMibCompliances 1 }
altigaPPPoEStatsGroup OBJECT-GROUP
OBJECTS
{
alPPPoEStatsActiveSessions,
alPPPoEStatsTotalSessions,
alPPPoEStatsMaxSessions,
alPPPoEStatsIfIndex,
alPPPoEStatsIfPADTRx,
alPPPoEStatsIfPADTTx,
alPPPoEStatsIfGenericErrorsRx,
alPPPoEStatsIfMalformedPacketsRx,
alPPPoEStatsIfPADITimeouts,
alPPPoEStatsIfPADRTimeouts,
alPPPoEStatsIfMultPADORx,
alPPPoEStatsIfSessionID,
alPPPoEStatsIfPeerAddr,
alPPPoEStatsIfSessionState,
alPPPoEStatsIfVersion,
alPPPoEStatsIfType,
alPPPoEStatsIfConnectTime,
alPPPoEStatsIfDuration,
alPPPoEStatsIfPeerName,
alPPPoEStatsIfACCookie,
alPPPoEStatsIfHostUnique,
alPPPoEStatsIfRelaySessID
}
STATUS current
DESCRIPTION
"The objects for PPPoE Statistics."
::= { alPPPoEGroup 2 }
END

811
snmp_mib_archive/ALTIGA-PPTP-STATS-MIB.my 2
View File

@ -1,811 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-PPTP-STATS-MIB.my: Altiga PPTP Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-PPTP-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, Counter32, Gauge32
FROM SNMPv2-SMI
RowStatus, DisplayString, TruthValue
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsPptp, alPptpGroup
FROM ALTIGA-MIB
alPptpMibModule
FROM ALTIGA-GLOBAL-REG;
altigaPptpStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga PPTP Statistics MIB models counters and objects that are
of management interest for PPTP tunnels.
Acronyms
The following acronyms are used in this document:
MIB: Management Information Base
PPTP: Point-to-Point Tunneling Protocol
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alPptpMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsPptpGlobal OBJECT IDENTIFIER ::= { alStatsPptp 1 }
alPptpStatsLocalProtVers OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the protocol version and
revision of the local implementation. The
first octet contains the protocol version. The
second octet contains the protocol revision."
::= { alStatsPptpGlobal 1 }
alPptpStatsLocalFraming OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A set of bits indicating the PPTP framing capabilities
of this system."
::= { alStatsPptpGlobal 2 }
alPptpStatsLocalBearer OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A set of bits indicating the PPTP bearer capabilities
of this system."
::= { alStatsPptpGlobal 3 }
alPptpStatsLocalFirmwareRev OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object defines the local firmware revision."
::= { alStatsPptpGlobal 4 }
alPptpStatsTotalTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of tunnels,
including those that did not reach the established
state."
::= { alStatsPptpGlobal 5 }
alPptpStatsActiveTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of tunnels that
are currently active."
::= { alStatsPptpGlobal 6 }
alPptpStatsMaxTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of simultaneously active PPTP tunnels
since the system was booted."
::= { alStatsPptpGlobal 7 }
alPptpStatsTotalSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of sessions,
including those that did not reach the established
state."
::= { alStatsPptpGlobal 8 }
alPptpStatsActiveSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of sessions that
are currently active."
::= { alStatsPptpGlobal 9 }
alPptpStatsMaxSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of simultaneously active PPTP sessions
since the system was booted."
::= { alStatsPptpGlobal 10 }
alPptpStatsControlRecvOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of control channel
octets received."
::= { alStatsPptpGlobal 11 }
alPptpStatsControlRecvPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of control packets
received."
::= { alStatsPptpGlobal 12 }
alPptpStatsControlRecvDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of control packets
received that were discarded."
::= { alStatsPptpGlobal 13 }
alPptpStatsControlSendOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of control channel
octets that were transmitted to tunnel endpoints."
::= { alStatsPptpGlobal 14 }
alPptpStatsControlSendPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of control packets
that were transmitted to tunnel endpoints."
::= { alStatsPptpGlobal 15 }
alPptpStatsPayloadRecvOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of payload channel
octets that were received."
::= { alStatsPptpGlobal 16 }
alPptpStatsPayloadRecvPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of payload packets
that were received."
::= { alStatsPptpGlobal 17 }
alPptpStatsPayloadRecvDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of received payload
packets that were discarded."
::= { alStatsPptpGlobal 18 }
alPptpStatsPayloadSendOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of payload channel
octets that were transmitted to tunnel peers."
::= { alStatsPptpGlobal 19 }
alPptpStatsPayloadSendPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of payload packets
that were transmitted to tunnel peers."
::= { alStatsPptpGlobal 20 }
alPptpStatsTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlPptpStatsTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PPTP tunnel status and statistics table."
::= { alStatsPptp 2 }
alPptpStatsTunnelEntry OBJECT-TYPE
SYNTAX AlPptpStatsTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alPptpStatsTunnelTable."
INDEX { alPptpStatsTunnelPeerIpAddr }
::= { alPptpStatsTunnelTable 1 }
AlPptpStatsTunnelEntry ::= SEQUENCE {
alPptpStatsTunnelRowStatus RowStatus,
alPptpStatsTunnelPeerIpAddr IpAddress,
alPptpStatsTunnelDatastreamId Integer32,
alPptpStatsTunnelLocalIpAddr IpAddress,
alPptpStatsTunnelPeerHostName DisplayString,
alPptpStatsTunnelPeerVendorName DisplayString,
alPptpStatsTunnelPeerFirmwareRev OCTET STRING,
alPptpStatsTunnelPeerProtVers OCTET STRING,
alPptpStatsTunnelPeerFramingCap Integer32,
alPptpStatsTunnelPeerBearerCap Integer32,
alPptpStatsTunnelPeerMaxChan Integer32,
alPptpStatsTunnelActiveSessions Counter32
}
alPptpStatsTunnelRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row. Used to terminate the tunnel,
cannot be used to create a tunnel."
::= { alPptpStatsTunnelEntry 1 }
alPptpStatsTunnelPeerIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer's IP address for this tunnel."
::= { alPptpStatsTunnelEntry 2 }
alPptpStatsTunnelDatastreamId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP-GRE datastream ID of this tunnel."
::= { alPptpStatsTunnelEntry 3 }
alPptpStatsTunnelLocalIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local IP address for this tunnel."
::= { alPptpStatsTunnelEntry 4 }
alPptpStatsTunnelPeerHostName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer's host name, as indicated by the peer in a
Start-Control-Connection packet."
::= { alPptpStatsTunnelEntry 5 }
alPptpStatsTunnelPeerVendorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer's vendor name, as indicated by the peer in a
Start-Control-Connection packet."
::= { alPptpStatsTunnelEntry 6 }
alPptpStatsTunnelPeerFirmwareRev OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the tunnel peer's firmware
revision number. If the tunnel is idle this object
should maintain its value from the last time it
was connected."
::= { alPptpStatsTunnelEntry 7 }
alPptpStatsTunnelPeerProtVers OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the protocol version and
revision of the tunnel peers implementation. The
first octet contains the protocol version. The
second octet contains the protocol revision."
::= { alPptpStatsTunnelEntry 8 }
alPptpStatsTunnelPeerFramingCap OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the Framing Capabilities of
the tunnel peer. If the tunnel is idle this object
should maintain its value from the last time it was
connected."
::= { alPptpStatsTunnelEntry 9 }
alPptpStatsTunnelPeerBearerCap OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the Bearer Capabilities of
the tunnel peer. If the tunnel is idle this object
should maintain its value from the last time it was
connected."
::= { alPptpStatsTunnelEntry 10 }
alPptpStatsTunnelPeerMaxChan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer's maximum channels value, as indicated by
the peer in a Start-Control-Connection packet."
::= { alPptpStatsTunnelEntry 11 }
alPptpStatsTunnelActiveSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the total number of sessions
for this tunnel."
::= { alPptpStatsTunnelEntry 12 }
alPptpStatsSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlPptpStatsSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of active sessions within tunnels."
::= { alStatsPptp 3 }
alPptpStatsSessionEntry OBJECT-TYPE
SYNTAX AlPptpStatsSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alPptpStatsSessionTable."
INDEX { alPptpStatsSessionDatastreamId }
::= { alPptpStatsSessionTable 1 }
AlPptpStatsSessionEntry ::= SEQUENCE {
alPptpStatsSessionRowStatus RowStatus,
alPptpStatsSessionDatastreamId Integer32,
alPptpStatsSessionLocalCallId Integer32,
alPptpStatsSessionPeerCallId Integer32,
alPptpStatsSessionUserName DisplayString,
alPptpStatsSessionSerial Integer32,
alPptpStatsSessionMinimumSpeed Integer32,
alPptpStatsSessionMaximumSpeed Integer32,
alPptpStatsSessionConnectSpeed Integer32,
alPptpStatsSessionBearerType INTEGER,
alPptpStatsSessionFramingType INTEGER,
alPptpStatsSessionPhysicalChannel Integer32,
alPptpStatsSessionLocalWindowSize Integer32,
alPptpStatsSessionPeerWindowSize Integer32,
alPptpStatsSessionLocalPpd Integer32,
alPptpStatsSessionPeerPpd Integer32,
alPptpStatsSessionRecvOctets Counter32,
alPptpStatsSessionRecvPackets Counter32,
alPptpStatsSessionRecvDiscards Counter32,
alPptpStatsSessionRecvZLB Counter32,
alPptpStatsSessionSendOctets Counter32,
alPptpStatsSessionSendPackets Counter32,
alPptpStatsSessionSendZLB Counter32,
alPptpStatsSessionAckTimeouts Counter32,
alPptpStatsSessionLocalFlowOff TruthValue,
alPptpStatsSessionPeerFlowOff TruthValue,
alPptpStatsSessionOutOfWindow Counter32,
alPptpStatsSessionOutOfSequence Counter32,
alPptpStatsSessionTunnelPeerIpAddr IpAddress
}
alPptpStatsSessionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row. Used to terminate the session,
cannot be used to create a Session."
::= { alPptpStatsSessionEntry 1 }
alPptpStatsSessionDatastreamId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The GRE-PPP datastream ID of this tunnel, used as the
index for this row."
::= { alPptpStatsSessionEntry 2 }
alPptpStatsSessionLocalCallId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local call ID within the tunnel of the session
represented by this row."
::= { alPptpStatsSessionEntry 3 }
alPptpStatsSessionPeerCallId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer call ID within the tunnel of the session
represented by this row."
::= { alPptpStatsSessionEntry 4 }
alPptpStatsSessionUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the peer session name on
this interface. This is typically the login name
of the remote user. If the user name is unknown to
the local tunnel peer then this object will contain
a null string."
::= { alPptpStatsSessionEntry 5 }
alPptpStatsSessionSerial OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The call serial number within the tunnel of the session
represented by this row."
::= { alPptpStatsSessionEntry 6 }
alPptpStatsSessionMinimumSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lowest acceptable line speed (in bits/second)
for this session, as indicated in the Call-Request
packet."
::= { alPptpStatsSessionEntry 7 }
alPptpStatsSessionMaximumSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest acceptable line speed (in bits/second)
for this session, as indicated in the Call-Request
packet."
::= { alPptpStatsSessionEntry 8 }
alPptpStatsSessionConnectSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual line speed (in bits/second) for this session."
::= { alPptpStatsSessionEntry 9 }
alPptpStatsSessionBearerType OBJECT-TYPE
SYNTAX INTEGER {
analog (1),
digital (2),
any (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value indicating the bearer capability required for
this session."
::= { alPptpStatsSessionEntry 10 }
alPptpStatsSessionFramingType OBJECT-TYPE
SYNTAX INTEGER {
asynchronous (1),
synchronous (2),
either (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value indicating the framing capability required for
this session."
::= { alPptpStatsSessionEntry 11 }
alPptpStatsSessionPhysicalChannel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical channel number used for this session."
::= { alPptpStatsSessionEntry 12 }
alPptpStatsSessionLocalWindowSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received data packets this system will
buffer for this session, as indicated in the setup packets
for this session."
::= { alPptpStatsSessionEntry 13 }
alPptpStatsSessionPeerWindowSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received data packets the peer will
buffer for this session, as indicated in the setup packets
for this session."
::= { alPptpStatsSessionEntry 14 }
alPptpStatsSessionLocalPpd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A measure of the packet processing delay that might be
imposed on data sent to this system, in units of 1/10
seconds."
::= { alPptpStatsSessionEntry 15 }
alPptpStatsSessionPeerPpd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A measure of the packet processing delay that might be
imposed on data sent to the peer, in units of 1/10
seconds."
::= { alPptpStatsSessionEntry 16 }
alPptpStatsSessionRecvOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number payload octets
received for this session."
::= { alPptpStatsSessionEntry 17 }
alPptpStatsSessionRecvPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of payload packets
received for this session."
::= { alPptpStatsSessionEntry 18 }
alPptpStatsSessionRecvDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of payload packets
received that were discarded for this session."
::= { alPptpStatsSessionEntry 19 }
alPptpStatsSessionRecvZLB OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of Zero Length
Body acknowlegement payload packets received for
this session."
::= { alPptpStatsSessionEntry 20 }
alPptpStatsSessionSendOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of payload octets
transmitted for this session."
::= { alPptpStatsSessionEntry 21 }
alPptpStatsSessionSendPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of payload packets
transmitted for this session."
::= { alPptpStatsSessionEntry 22 }
alPptpStatsSessionSendZLB OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of Zero
Length Body acknowledgement packets transmitted
for this session."
::= { alPptpStatsSessionEntry 23 }
alPptpStatsSessionAckTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of
acknowledgement timeouts seen on payload
packets for this session."
::= { alPptpStatsSessionEntry 24 }
alPptpStatsSessionLocalFlowOff OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the session is in a locally flowed-off
state because the number of outstanding unacknowledged
packets received from the peer is equal to the local
window size."
::= { alPptpStatsSessionEntry 25 }
alPptpStatsSessionPeerFlowOff OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the session peer is in a flowed-off
state because the number of outstanding unacknowledged
packets sent to the peer is equal to the peer's window
size."
::= { alPptpStatsSessionEntry 26 }
alPptpStatsSessionOutOfWindow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of data packets received from the peer which
were received outside of the offered receive window."
::= { alPptpStatsSessionEntry 27 }
alPptpStatsSessionOutOfSequence OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of data packets that were not received in the
correct order (as per the sequence number)."
::= { alPptpStatsSessionEntry 28 }
alPptpStatsSessionTunnelPeerIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer's IP address for the tunnel over which this session
is established."
::= { alPptpStatsSessionEntry 29 }
altigaPptpStatsMibConformance OBJECT IDENTIFIER ::= { altigaPptpStatsMibModule 1 }
altigaPptpStatsMibCompliances OBJECT IDENTIFIER ::= { altigaPptpStatsMibConformance 1 }
altigaPptpStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga PPTP Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaPptpStatsGroup
}
::= { altigaPptpStatsMibCompliances 1 }
altigaPptpStatsGroup OBJECT-GROUP
OBJECTS
{
alPptpStatsLocalProtVers,
alPptpStatsLocalFraming,
alPptpStatsLocalBearer,
alPptpStatsLocalFirmwareRev,
alPptpStatsTotalTunnels,
alPptpStatsActiveTunnels,
alPptpStatsMaxTunnels,
alPptpStatsTotalSessions,
alPptpStatsActiveSessions,
alPptpStatsMaxSessions,
alPptpStatsControlRecvOctets,
alPptpStatsControlRecvPackets,
alPptpStatsControlRecvDiscards,
alPptpStatsControlSendOctets,
alPptpStatsControlSendPackets,
alPptpStatsPayloadRecvOctets,
alPptpStatsPayloadRecvPackets,
alPptpStatsPayloadRecvDiscards,
alPptpStatsPayloadSendOctets,
alPptpStatsPayloadSendPackets,
alPptpStatsTunnelRowStatus,
alPptpStatsTunnelDatastreamId,
alPptpStatsTunnelLocalIpAddr,
alPptpStatsTunnelPeerIpAddr,
alPptpStatsTunnelPeerHostName,
alPptpStatsTunnelPeerVendorName,
alPptpStatsTunnelPeerFirmwareRev,
alPptpStatsTunnelPeerProtVers,
alPptpStatsTunnelPeerFramingCap,
alPptpStatsTunnelPeerBearerCap,
alPptpStatsTunnelPeerMaxChan,
alPptpStatsTunnelActiveSessions,
alPptpStatsSessionRowStatus,
alPptpStatsSessionDatastreamId,
alPptpStatsSessionLocalCallId,
alPptpStatsSessionPeerCallId,
alPptpStatsSessionUserName,
alPptpStatsSessionSerial,
alPptpStatsSessionMinimumSpeed,
alPptpStatsSessionMaximumSpeed,
alPptpStatsSessionConnectSpeed,
alPptpStatsSessionBearerType,
alPptpStatsSessionFramingType,
alPptpStatsSessionPhysicalChannel,
alPptpStatsSessionLocalWindowSize,
alPptpStatsSessionPeerWindowSize,
alPptpStatsSessionLocalPpd,
alPptpStatsSessionPeerPpd,
alPptpStatsSessionRecvOctets,
alPptpStatsSessionRecvPackets,
alPptpStatsSessionRecvDiscards,
alPptpStatsSessionRecvZLB,
alPptpStatsSessionSendOctets,
alPptpStatsSessionSendPackets,
alPptpStatsSessionSendZLB,
alPptpStatsSessionAckTimeouts,
alPptpStatsSessionLocalFlowOff,
alPptpStatsSessionPeerFlowOff,
alPptpStatsSessionOutOfWindow,
alPptpStatsSessionOutOfSequence,
alPptpStatsSessionTunnelPeerIpAddr
}
STATUS current
DESCRIPTION
"The objects for PPTP statistics."
::= { alPptpGroup 2 }
END

239
snmp_mib_archive/ALTIGA-SDI-ACE-STATS-MIB.my 2
View File

@ -1,239 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-SDI-ACE-STATS-MIB.my: SDI ACE Server Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-SDI-ACE-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, Counter32, Gauge32
FROM SNMPv2-SMI
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alACEServerStats, alACEServerGroup
FROM ALTIGA-MIB
alACEServerMibModule
FROM ALTIGA-GLOBAL-REG;
altigaACEStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga SDI ACE Server Statistics MIB models counters and objects that are
of management interest for SDI ACE Server.
Acronyms
The following acronyms are used in this document:
ACE: Access Control Encryption
MIB: Management Information Base
PIN: Personal Identification Number
SDI: Security Dynamics Technologies, Inc
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alACEServerMibModule 1 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alCfgACEGlobal OBJECT IDENTIFIER ::= { alACEServerStats 1 }
alACEServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlACEServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of authentication servers."
::= { alACEServerStats 2 }
alACEServerEntry OBJECT-TYPE
SYNTAX AlACEServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alAuthServerTable."
INDEX { alACEPrimaryIndex, alACEServerIndex }
::= { alACEServerTable 1 }
AlACEServerEntry ::= SEQUENCE {
alACEPrimaryIndex Integer32,
alACEServerIndex Integer32,
alACEServerPriority Integer32,
alACEServerAddress IpAddress,
alACEServerPort Integer32,
alACEServerRetries Counter32,
alACEServerTimeout Counter32,
alACEServerGroupId Gauge32,
alACEServerAuthSuccesses Counter32,
alACEServerAuthFailures Counter32,
alACEServerBadCodeSent Counter32,
alACEServerBadPinSent Counter32
}
alACEPrimaryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the configured primary server"
::= { alACEServerEntry 1 }
alACEServerIndex OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of this server into the server list"
::= { alACEServerEntry 2 }
alACEServerPriority OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority as computed by loadbalancing"
::= { alACEServerEntry 3 }
alACEServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Resolved address from the ACE Server."
::= { alACEServerEntry 4 }
alACEServerPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port over ride for this entry"
::= { alACEServerEntry 5 }
alACEServerRetries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of retries for this server."
::= { alACEServerEntry 6 }
alACEServerTimeout OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timeout, in seconds to access this server."
::= { alACEServerEntry 7 }
alACEServerGroupId OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group that this authentication server entry belongs to."
::= { alACEServerEntry 8 }
alACEServerAuthSuccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"number of auth successes."
::= { alACEServerEntry 9 }
alACEServerAuthFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"number of failures for this server."
::= { alACEServerEntry 10 }
alACEServerBadCodeSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"number of Bad Code sent to this server."
::= { alACEServerEntry 11 }
alACEServerBadPinSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"number of Bad Pin sent to this server."
::= { alACEServerEntry 12 }
altigaACEStatsMibConformance OBJECT IDENTIFIER ::= { altigaACEStatsMibModule 1 }
altigaACEStatsMibCompliances OBJECT IDENTIFIER ::= { altigaACEStatsMibConformance 1 }
altigaACEStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga ACE Server Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaACEServerGroup
}
::= { altigaACEStatsMibCompliances 1 }
altigaACEServerGroup OBJECT-GROUP
OBJECTS
{
alACEPrimaryIndex,
alACEServerIndex,
alACEServerPriority,
alACEServerAddress,
alACEServerPort,
alACEServerRetries,
alACEServerTimeout,
alACEServerGroupId,
alACEServerAuthSuccesses,
alACEServerAuthFailures,
alACEServerBadCodeSent,
alACEServerBadPinSent
}
STATUS current
DESCRIPTION
"The objects for ACE-STATS."
::= { alACEServerGroup 1 }
END

497
snmp_mib_archive/ALTIGA-SEP-STATS-MIB.my 2
View File

@ -1,497 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-SEP-STATS-MIB.my: Cisco VPN3000 Series SEP Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002, 2003 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-SEP-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32
FROM SNMPv2-SMI
RowStatus, DisplayString
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsSep, alSepGroup
FROM ALTIGA-MIB
alSepMibModule
FROM ALTIGA-GLOBAL-REG;
altigaSepStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200303270000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Cisco VPN 3000 Series SEP Statistics MIB models counters
and objects that are of management interest for the SEP
hardware.
Acronyms
The following acronyms are used in this document:
MIB: Management Information Base
RSA: Rivest, Shamir, and Adelman
SEP: Scalable Encryption Processor
"
REVISION "200303270000Z"
DESCRIPTION
"Added new enum value to alSepModuleStatsType
and alSepModuleStatsState."
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alSepMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- per SEP statistics
alSepModuleStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlSepModuleStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of SEPs modules found."
::= { alStatsSep 2 }
alSepModuleStatsEntry OBJECT-TYPE
SYNTAX AlSepModuleStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alSepModuleStatsTable."
INDEX { alSepModuleStatsSlotNum }
::= { alSepModuleStatsTable 1 }
AlSepModuleStatsEntry ::= SEQUENCE {
alSepModuleStatsRowStatus RowStatus,
alSepModuleStatsSlotNum INTEGER,
alSepModuleStatsType INTEGER,
alSepModuleStatsState INTEGER,
alSepModuleStatsDspCodeVersion DisplayString,
alSepModuleStatsHashOutboundPackets Counter32,
alSepModuleStatsHashOutboundOctets Counter32,
alSepModuleStatsHashInboundPackets Counter32,
alSepModuleStatsHashInboundOctets Counter32,
alSepModuleStatsEncPackets Counter32,
alSepModuleStatsEncOctets Counter32,
alSepModuleStatsDecPackets Counter32,
alSepModuleStatsDecOctets Counter32,
alSepModuleStatsHashEncPackets Counter32,
alSepModuleStatsHashDecPackets Counter32,
alSepModuleStatsCryptoTransformsTotal Counter32,
alSepModuleStatsPacketDrops Counter32,
alSepModuleStatsRandRequests Counter32,
alSepModuleStatsRandReplens Counter32,
alSepModuleStatsRandBytesAvail Integer32,
alSepModuleStatsRandCacheEmpty Counter32,
alSepModuleStatsDHKeysGenerated Counter32,
alSepModuleStatsDHDerivedSecretKeys Counter32,
alSepModuleStatsRSASignings Counter32,
alSepModuleStatsRSAVerifications Counter32,
alSepModuleStatsRSAEncPackets Counter32,
alSepModuleStatsRSAEncOctets Counter32,
alSepModuleStatsRSADecPackets Counter32,
alSepModuleStatsRSADecOctets Counter32,
alSepModuleStatsDSAKeysGenerated Counter32,
alSepModuleStatsDSASignings Counter32,
alSepModuleStatsDSAVerifications Counter32,
alSepModuleStatsRSAKeysGenerated Counter32
}
alSepModuleStatsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row."
::= { alSepModuleStatsEntry 1 }
alSepModuleStatsSlotNum OBJECT-TYPE
SYNTAX INTEGER(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The physical slot this SEP is connected to."
::= { alSepModuleStatsEntry 2 }
alSepModuleStatsType OBJECT-TYPE
SYNTAX INTEGER {
cryptSet(1),
cryptIc(2),
bcm582x(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the type of HW engine used to perform the
cryptographic transforms.
cryptSet: First generation of Hardware Cryptographic Processor.
cryptIc: Cryptographic Integrated Circuit.
bcm582x: BroadCom 582x series Hardware Cryptographic Products.
"
::= { alSepModuleStatsEntry 3 }
alSepModuleStatsState OBJECT-TYPE
SYNTAX INTEGER {
sepNotFound(1),
sepFound(2),
sepDiagFailure(3),
sepNotOperational(4),
sepLoading(5),
sepInitializing(6),
sepOperational(7),
sepDisabled(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The functional state of this SEP.
sepNotFound: SEP is not found.
sepFound: SEP is found.
sepDiagFailure: SEP dialog fail.
sepNotOperational: SEP is not operational.
sepLoading: SEP is loading data.
sepInitializing: SEP is initializing.
sepOperational: SEP is operational.
sepDisabled: SEP is disabled.
"
::= { alSepModuleStatsEntry 4 }
alSepModuleStatsDspCodeVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of DSP microcode running on this SEP."
::= { alSepModuleStatsEntry 5 }
alSepModuleStatsHashOutboundPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound authentication-only packets processed
by this SEP."
::= { alSepModuleStatsEntry 6 }
alSepModuleStatsHashOutboundOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound octets authenticated by this SEP."
::= { alSepModuleStatsEntry 7 }
alSepModuleStatsHashInboundPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound authentication-only packets processed
by this SEP."
::= { alSepModuleStatsEntry 8 }
alSepModuleStatsHashInboundOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound octets authenticated by this SEP."
::= { alSepModuleStatsEntry 9 }
alSepModuleStatsEncPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound encryption-only packets processed by
this SEP."
::= { alSepModuleStatsEntry 10 }
alSepModuleStatsEncOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound octets encrypted by this SEP."
::= { alSepModuleStatsEntry 11 }
alSepModuleStatsDecPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound decryption-only packets processed by
this SEP."
::= { alSepModuleStatsEntry 12 }
alSepModuleStatsDecOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound octets decrypted by this SEP."
::= { alSepModuleStatsEntry 13 }
alSepModuleStatsHashEncPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of combined outbound hash/encrypt packets processed
by this SEP."
::= { alSepModuleStatsEntry 14 }
alSepModuleStatsHashDecPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of combined inbound hash/decrypt packets processed
by this SEP."
::= { alSepModuleStatsEntry 15 }
alSepModuleStatsCryptoTransformsTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of hash, encryption, decryption,
hash/encrypt, and hash/decrypt transforms
performed by this SEP."
::= { alSepModuleStatsEntry 16 }
alSepModuleStatsPacketDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets intended for SEP processing,
dropped due to the SEP ring being full."
::= { alSepModuleStatsEntry 17 }
alSepModuleStatsRandRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of random # requests made to the SEP."
::= { alSepModuleStatsEntry 18 }
alSepModuleStatsRandReplens OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of random # requests fulfilled by the SEP."
::= { alSepModuleStatsEntry 19 }
alSepModuleStatsRandBytesAvail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of random bytes currently cached on the Host."
::= { alSepModuleStatsEntry 20 }
alSepModuleStatsRandCacheEmpty OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a random # request came in and
we had no SEP generated random #'s available on the host."
::= { alSepModuleStatsEntry 21 }
alSepModuleStatsDHKeysGenerated OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a new Diffie Hellman key pair has been
generated by a SEP."
::= { alSepModuleStatsEntry 22 }
alSepModuleStatsDHDerivedSecretKeys OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a SEP has derived the Diffie Hellman
secret key."
::= { alSepModuleStatsEntry 23 }
alSepModuleStatsRSASignings OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an RSA Digital Signature has been
generated by a SEP."
::= { alSepModuleStatsEntry 24 }
alSepModuleStatsRSAVerifications OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an RSA Digital Signature has been
verified by a SEP."
::= { alSepModuleStatsEntry 25 }
alSepModuleStatsRSAEncPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets RSA-encrypted by this SEP."
::= { alSepModuleStatsEntry 26 }
alSepModuleStatsRSAEncOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets RSA-encrypted by this SEP."
::= { alSepModuleStatsEntry 27 }
alSepModuleStatsRSADecPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets RSA-decrypted by this SEP."
::= { alSepModuleStatsEntry 28 }
alSepModuleStatsRSADecOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets RSA-decrypted by this SEP."
::= { alSepModuleStatsEntry 29 }
alSepModuleStatsDSAKeysGenerated OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a new DSA Key pair has been
generated by a SEP."
::= { alSepModuleStatsEntry 30 }
alSepModuleStatsDSASignings OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a DSA Digital Signature has been
generated by a SEP."
::= { alSepModuleStatsEntry 31 }
alSepModuleStatsDSAVerifications OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a DSA Digital Signature has been
verified by a SEP."
::= { alSepModuleStatsEntry 32 }
alSepModuleStatsRSAKeysGenerated OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a new RSA Key pair has been
generated by a SEP."
::= { alSepModuleStatsEntry 33 }
altigaSepStatsMibConformance OBJECT IDENTIFIER
::= { altigaSepStatsMibModule 1 }
altigaSepStatsMibCompliances OBJECT IDENTIFIER
::= { altigaSepStatsMibConformance 1 }
altigaSepStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga SEP Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaSepStatsGroup
}
::= { altigaSepStatsMibCompliances 1 }
altigaSepStatsGroup OBJECT-GROUP
OBJECTS
{
alSepModuleStatsRowStatus,
alSepModuleStatsType,
alSepModuleStatsState,
alSepModuleStatsDspCodeVersion,
alSepModuleStatsHashOutboundPackets,
alSepModuleStatsHashOutboundOctets,
alSepModuleStatsHashInboundPackets,
alSepModuleStatsHashInboundOctets,
alSepModuleStatsEncPackets,
alSepModuleStatsEncOctets,
alSepModuleStatsDecPackets,
alSepModuleStatsDecOctets,
alSepModuleStatsHashEncPackets,
alSepModuleStatsHashDecPackets,
alSepModuleStatsCryptoTransformsTotal,
alSepModuleStatsPacketDrops,
alSepModuleStatsRandRequests,
alSepModuleStatsRandReplens,
alSepModuleStatsRandBytesAvail,
alSepModuleStatsRandCacheEmpty,
alSepModuleStatsDHKeysGenerated,
alSepModuleStatsDHDerivedSecretKeys,
alSepModuleStatsRSASignings,
alSepModuleStatsRSAVerifications,
alSepModuleStatsRSAEncPackets,
alSepModuleStatsRSAEncOctets,
alSepModuleStatsRSADecPackets,
alSepModuleStatsRSADecOctets,
alSepModuleStatsDSAKeysGenerated,
alSepModuleStatsDSASignings,
alSepModuleStatsDSAVerifications,
alSepModuleStatsRSAKeysGenerated
}
STATUS current
DESCRIPTION
"The objects for the SEP Module statistics."
::= { alSepGroup 2 }
END

2093
snmp_mib_archive/ALTIGA-SESSION-STATS-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

287
snmp_mib_archive/ALTIGA-SSH-STATS-MIB.my 2
View File

@ -1,287 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-SSH-STATS-MIB.my: Altiga SSH Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-SSH-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, Unsigned32, IpAddress,
Integer32, TimeTicks
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC
EncryptionAlgorithm
FROM ALTIGA-SESSION-STATS-MIB
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsSsh, alSshGroup
FROM ALTIGA-MIB
alSshMibModule
FROM ALTIGA-GLOBAL-REG;
altigaSshStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga SSH Statistics MIB models counters and objects that are
of management interest for SSH.
Acronyms
The following acronyms are used in this document:
MIB: Management Information Base
SSH: Secure Shell
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alSshMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsSshGlobal OBJECT IDENTIFIER ::= { alStatsSsh 1 }
alSshStatsOctetsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets sent."
::= { alStatsSshGlobal 1 }
alSshStatsOctetsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets received."
::= { alStatsSshGlobal 2 }
alSshStatsPacketsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets."
::= { alStatsSshGlobal 3 }
alSshStatsPacketsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received."
::= { alStatsSshGlobal 4 }
alSshStatsTotalSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SSH sessions established."
::= { alStatsSshGlobal 5 }
alSshStatsActiveSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of active sessions."
::= { alStatsSshGlobal 6 }
alSshStatsMaxSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of active sessions that existed at one any time."
::= { alStatsSshGlobal 7 }
alSshStatsSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlSshStatsSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of active HTTP sessions."
::= { alStatsSsh 2 }
alSshStatsSessionEntry OBJECT-TYPE
SYNTAX AlSshStatsSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alSshStatsSessionTable."
INDEX { alSshStatsSessionIndex }
::= { alSshStatsSessionTable 1 }
AlSshStatsSessionEntry ::= SEQUENCE {
alSshStatsSessionIndex Integer32,
alSshStatsSessionName DisplayString,
alSshStatsSessionIpAddr IpAddress,
alSshStatsSessionPort Unsigned32,
alSshStatsSessionStartTime TimeTicks,
alSshStatsSessionLoginTime Unsigned32,
alSshStatsSessionEncr EncryptionAlgorithm,
alSshStatsSessionOctetsSent Counter32,
alSshStatsSessionOctetsRcvd Counter32,
alSshStatsSessionPacketsSent Counter32,
alSshStatsSessionPacketsRcvd Counter32
}
alSshStatsSessionIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of this session."
::= { alSshStatsSessionEntry 1 }
alSshStatsSessionName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the administrator using this session."
::= { alSshStatsSessionEntry 2 }
alSshStatsSessionIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote IP address of this session.."
::= { alSshStatsSessionEntry 3 }
alSshStatsSessionPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote IP port address of this session.."
::= { alSshStatsSessionEntry 4 }
alSshStatsSessionStartTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Login time of this session."
::= { alSshStatsSessionEntry 5 }
alSshStatsSessionLoginTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"time_t value of the concentrator at the start of this session."
::= { alSshStatsSessionEntry 6 }
alSshStatsSessionEncr OBJECT-TYPE
SYNTAX EncryptionAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of encryption algorithm used for this session."
::= { alSshStatsSessionEntry 7 }
alSshStatsSessionOctetsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets sent during this session."
::= { alSshStatsSessionEntry 8 }
alSshStatsSessionOctetsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received during this session."
::= { alSshStatsSessionEntry 9 }
alSshStatsSessionPacketsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets sent during this session."
::= { alSshStatsSessionEntry 10 }
alSshStatsSessionPacketsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets received during this session."
::= { alSshStatsSessionEntry 11 }
altigaSshStatsMibConformance OBJECT IDENTIFIER ::= { altigaSshStatsMibModule 1 }
altigaSshStatsMibCompliances OBJECT IDENTIFIER ::= { altigaSshStatsMibConformance 1 }
altigaSshStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga SSH Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaSshStatsGroup
}
::= { altigaSshStatsMibCompliances 1 }
altigaSshStatsGroup OBJECT-GROUP
OBJECTS
{
alSshStatsOctetsSent,
alSshStatsOctetsRcvd,
alSshStatsPacketsSent,
alSshStatsPacketsRcvd,
alSshStatsTotalSessions,
alSshStatsActiveSessions,
alSshStatsMaxSessions,
alSshStatsSessionIndex,
alSshStatsSessionName,
alSshStatsSessionIpAddr,
alSshStatsSessionPort,
alSshStatsSessionStartTime,
alSshStatsSessionLoginTime,
alSshStatsSessionEncr,
alSshStatsSessionOctetsSent,
alSshStatsSessionOctetsRcvd,
alSshStatsSessionPacketsSent,
alSshStatsSessionPacketsRcvd
}
STATUS current
DESCRIPTION
"The objects for SSH statistics."
::= { alSshGroup 2 }
END

154
snmp_mib_archive/ALTIGA-SSL-STATS-MIB.my 2
View File

@ -1,154 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-SSL-STATS-MIB.my: Altiga SSL Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-SSL-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32
FROM SNMPv2-SMI
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsSsl, alSslGroup
FROM ALTIGA-MIB
alSslMibModule
FROM ALTIGA-GLOBAL-REG;
altigaSslStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga SSL Statistics MIB models counters and objects that are
of management interest for SSL.
Acronyms
The following acronyms are used in this document:
MIB: Management Information Base
SSL: Secure Sockets Layer
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alSslMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsSslGlobal OBJECT IDENTIFIER ::= { alStatsSsl 1 }
alSslStatsTotalSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of total sessions."
::= { alStatsSslGlobal 1 }
alSslStatsActiveSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of active sessions."
::= { alStatsSslGlobal 2 }
alSslStatsMaxSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number current of active sessions at
any one time."
::= { alStatsSslGlobal 3 }
alSslStatsPreDecryptOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets sent to the decryption engine. Includes
octets used as part of negotiation."
::= { alStatsSslGlobal 4 }
alSslStatsPostDecryptOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets received from the decryption engine."
::= { alStatsSslGlobal 5 }
alSslStatsPreEncryptOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets send to the encryption engine."
::= { alStatsSslGlobal 6 }
alSslStatsPostEncryptOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets received from the encryption engine.
Includes octets used as part of negitiation."
::= { alStatsSslGlobal 7 }
altigaSslStatsMibConformance OBJECT IDENTIFIER ::= { altigaSslStatsMibModule 1 }
altigaSslStatsMibCompliances OBJECT IDENTIFIER ::= { altigaSslStatsMibConformance 1 }
altigaSslStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga SSL Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaSslStatsGroup
}
::= { altigaSslStatsMibCompliances 1 }
altigaSslStatsGroup OBJECT-GROUP
OBJECTS
{
alSslStatsTotalSessions,
alSslStatsActiveSessions,
alSslStatsMaxSessions,
alSslStatsPreDecryptOctets,
alSslStatsPostDecryptOctets,
alSslStatsPreEncryptOctets,
alSslStatsPostEncryptOctets
}
STATUS current
DESCRIPTION
"The objects for SSL statistics."
::= { alSslGroup 2 }
END

362
snmp_mib_archive/ALTIGA-SYNC-STATS-MIB.my 2
View File

@ -1,362 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-SYNC-STATS-MIB.my: Altiga Sync Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-SYNC-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32
FROM SNMPv2-SMI
RowStatus
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsSync, alSyncGroup
FROM ALTIGA-MIB
alSyncMibModule
FROM ALTIGA-GLOBAL-REG
InterfaceIndex
FROM IF-MIB;
altigaSyncStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga Sync Statistics MIB models counters and objects
that are of management interest.
Acronyms
The following acronyms are used in this document:
CRC: Cyclic Redundancy Check
HDLC: High-level Data Link Control
MIB: Management Information Base
MTU: Maximum Transmission Unit
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alSyncMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsSyncGlobal OBJECT IDENTIFIER ::= { alStatsSync 1 }
alSyncStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlSyncStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SYNC interface statistics MIB."
::= { alStatsSync 2 }
alSyncStatsEntry OBJECT-TYPE
SYNTAX AlSyncStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry the alSyncStatsTable."
INDEX { alSyncStatsSlot, alSyncStatsConn, alSyncStatsChannel }
::= { alSyncStatsTable 1 }
AlSyncStatsEntry ::= SEQUENCE {
alSyncStatsRowStatus RowStatus,
alSyncStatsSlot Integer32,
alSyncStatsConn Integer32,
alSyncStatsChannel Integer32,
alSyncStatsIfIndex InterfaceIndex,
alSyncStatsPortState INTEGER,
alSyncStatsRxFrames Counter32,
alSyncStatsRxOctets Counter32,
alSyncStatsRxReplenFails Counter32,
alSyncStatsRxClockErrors Counter32,
alSyncStatsRxDpllErrors Counter32,
alSyncStatsRxFrameTooLongErrors Counter32,
alSyncStatsRxFrameOctetAlignErrors Counter32,
alSyncStatsRxAbortErrors Counter32,
alSyncStatsRxCrcErrors Counter32,
alSyncStatsRxRcvrOverrunErrors Counter32,
alSyncStatsTxFrames Counter32,
alSyncStatsTxOctets Counter32,
alSyncStatsTxRingFullDropsErrors Counter32,
alSyncStatsTxClockErrors Counter32,
alSyncStatsTxFrameTooLongErrors Counter32,
alSyncStatsTxUnderrunErrors Counter32
}
alSyncStatsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row."
::= { alSyncStatsEntry 1 }
alSyncStatsSlot OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical slot for this Sync port. Part of the index."
::= { alSyncStatsEntry 2 }
alSyncStatsConn OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical connector for this Sync port. Part of the index."
::= { alSyncStatsEntry 3 }
alSyncStatsChannel OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The virtual channel for this Sync port. Part of the index."
::= { alSyncStatsEntry 4 }
alSyncStatsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IfIndex of this SYNC slot/conn/channel. This is
configured, but configuration is not available via
SNMP."
::= { alSyncStatsEntry 5 }
alSyncStatsPortState OBJECT-TYPE
SYNTAX INTEGER {
init(1), -- port is coming up
running(2), -- port has finished initialization
-- and is waiting to transition to
-- data state
up(3), -- ready to pass packets
down(4) -- port is down, unable to pass
-- packets
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the interface.
The init(1) state indicates the port is in the state
of trying to come up. It will transition to running(2)
once initialization is complete. up(3) indicates the
interface is capable of passing packets. down(4) indicates
the interface is no longer capable of passing packets."
::= { alSyncStatsEntry 6 }
alSyncStatsRxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received on this HDLC interface."
::= { alSyncStatsEntry 7 }
alSyncStatsRxOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets received on this HDLC interface."
::= { alSyncStatsEntry 8 }
alSyncStatsRxReplenFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times receive buffers could not be allocated
on this HDLC interface."
::= { alSyncStatsEntry 9 }
alSyncStatsRxClockErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of clock errors on this HDLC interface."
::= { alSyncStatsEntry 10 }
alSyncStatsRxDpllErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DPLL errors received on this HDLC interface."
::= { alSyncStatsEntry 11 }
alSyncStatsRxFrameTooLongErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received long frame errors received on this
HDLC interface."
::= { alSyncStatsEntry 12 }
alSyncStatsRxFrameOctetAlignErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received long frame errors received on
this HDLC interface."
::= { alSyncStatsEntry 13 }
alSyncStatsRxAbortErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received abort errors received on
this HDLC interface."
::= { alSyncStatsEntry 14 }
alSyncStatsRxCrcErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received CRC errors received on
this HDLC interface."
::= { alSyncStatsEntry 15 }
alSyncStatsRxRcvrOverrunErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received CRC errors received on
this HDLC interface."
::= { alSyncStatsEntry 16 }
alSyncStatsTxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted frames on this HDLC interface."
::= { alSyncStatsEntry 17 }
alSyncStatsTxOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted frames on this HDLC interface."
::= { alSyncStatsEntry 18 }
alSyncStatsTxRingFullDropsErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames dropped on this HDLC interface because
the transmit ring was full."
::= { alSyncStatsEntry 19 }
alSyncStatsTxClockErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmit clock errors on this HDLC interface."
::= { alSyncStatsEntry 20 }
alSyncStatsTxFrameTooLongErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames dropped this HDLC interface because they
were long than the interface's MTU."
::= { alSyncStatsEntry 21 }
alSyncStatsTxUnderrunErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitter underruns on this HDLC interface."
::= { alSyncStatsEntry 22 }
altigaSyncStatsMibConformance OBJECT IDENTIFIER
::= { altigaSyncStatsMibModule 1 }
altigaSyncStatsMibCompliances OBJECT IDENTIFIER
::= { altigaSyncStatsMibConformance 1 }
altigaSyncStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga Sync Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaSyncStatsGroup
}
::= { altigaSyncStatsMibCompliances 1 }
altigaSyncStatsGroup OBJECT-GROUP
OBJECTS
{
alSyncStatsRowStatus,
alSyncStatsSlot,
alSyncStatsConn,
alSyncStatsChannel,
alSyncStatsIfIndex,
alSyncStatsPortState,
alSyncStatsRxFrames,
alSyncStatsRxOctets,
alSyncStatsRxReplenFails,
alSyncStatsRxClockErrors,
alSyncStatsRxDpllErrors,
alSyncStatsRxFrameTooLongErrors,
alSyncStatsRxFrameOctetAlignErrors,
alSyncStatsRxAbortErrors,
alSyncStatsRxCrcErrors,
alSyncStatsRxRcvrOverrunErrors,
alSyncStatsTxFrames,
alSyncStatsTxOctets,
alSyncStatsTxRingFullDropsErrors,
alSyncStatsTxClockErrors,
alSyncStatsTxFrameTooLongErrors,
alSyncStatsTxUnderrunErrors
}
STATUS current
DESCRIPTION
"The objects for SYNC configuration."
::= { alSyncGroup 2 }
END

275
snmp_mib_archive/ALTIGA-T1E1-STATS-MIB.my 2
View File

@ -1,275 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-T1E1-STATS-MIB.my: Altiga T1/E1 Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-T1E1-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32
FROM SNMPv2-SMI
RowStatus
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsT1E1, alT1E1Group
FROM ALTIGA-MIB
alT1E1MibModule
FROM ALTIGA-GLOBAL-REG;
altigaT1E1StatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga T1/E1 Statistics MIB models counters and objects that are
of management interest.
Acronyms
The following acronyms are used in this document:
MIB: Management Information Base
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alT1E1MibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsT1E1Global OBJECT IDENTIFIER ::= { alStatsT1E1 1 }
alT1E1StatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlT1E1StatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The T1/E1 interface statistics MIB."
::= { alStatsT1E1 2 }
alT1E1StatsEntry OBJECT-TYPE
SYNTAX AlT1E1StatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry the alT1E1StatsTable."
INDEX { alT1E1StatsSlot, alT1E1StatsConn }
::= { alT1E1StatsTable 1 }
AlT1E1StatsEntry ::= SEQUENCE {
alT1E1StatsRowStatus RowStatus,
alT1E1StatsSlot Integer32,
alT1E1StatsConn Integer32,
alT1E1StatsLineStatus INTEGER,
alT1E1StatsElapsedSecs Counter32,
alT1E1StatsBPVs Counter32,
alT1E1StatsESs Counter32,
alT1E1StatsSESs Counter32,
alT1E1StatsBESs Counter32,
alT1E1StatsSEFSs Counter32,
alT1E1StatsUASs Counter32,
alT1E1StatsLCVs Counter32,
alT1E1StatsCSSs Counter32,
alT1E1StatsDMs Counter32,
alT1E1StatsPCVs Counter32,
alT1E1StatsLESs Counter32
}
alT1E1StatsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row."
::= { alT1E1StatsEntry 1 }
alT1E1StatsSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical slot for this T1/E1 port. Part of the index."
::= { alT1E1StatsEntry 2 }
alT1E1StatsConn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical connector for this T1/E1 port. Part of the index."
::= { alT1E1StatsEntry 3 }
alT1E1StatsLineStatus OBJECT-TYPE
SYNTAX INTEGER {
init (1),
up (2),
red (3),
blue (4),
yellow (5),
loopback (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of the line."
::= { alT1E1StatsEntry 4 }
alT1E1StatsElapsedSecs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds this T1/E1 port has been running."
::= { alT1E1StatsEntry 5 }
alT1E1StatsBPVs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bipolar violations detected on this T1/E1 port."
::= { alT1E1StatsEntry 6 }
alT1E1StatsESs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of errored seconds detected on this T1/E1 port."
::= { alT1E1StatsEntry 7 }
alT1E1StatsSESs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of severly errored secondss detected on this T1/E1 port."
::= { alT1E1StatsEntry 8 }
alT1E1StatsBESs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bursty errored seconds detected on this T1/E1 port."
::= { alT1E1StatsEntry 9 }
alT1E1StatsSEFSs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of severly errored framing seconds detected on this T1/E1 port."
::= { alT1E1StatsEntry 10 }
alT1E1StatsUASs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unavailable seconds detected on this T1/E1 port."
::= { alT1E1StatsEntry 11 }
alT1E1StatsLCVs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of line coding violations detected on this T1/E1 port."
::= { alT1E1StatsEntry 12 }
alT1E1StatsCSSs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of controlled slips detected on this T1/E1 port."
::= { alT1E1StatsEntry 13 }
alT1E1StatsDMs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of degraded minutes detected on this T1/E1 port."
::= { alT1E1StatsEntry 14 }
alT1E1StatsPCVs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of path coding violations detected on this T1/E1 port."
::= { alT1E1StatsEntry 15 }
alT1E1StatsLESs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of line errored seconds detected on this T1/E1 port."
::= { alT1E1StatsEntry 16 }
altigaT1E1StatsMibConformance OBJECT IDENTIFIER ::= { altigaT1E1StatsMibModule 1 }
altigaT1E1StatsMibCompliances OBJECT IDENTIFIER ::= { altigaT1E1StatsMibConformance 1 }
altigaT1E1StatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga T1/E1 Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaT1E1StatsGroup
}
::= { altigaT1E1StatsMibCompliances 1 }
altigaT1E1StatsGroup OBJECT-GROUP
OBJECTS
{
alT1E1StatsRowStatus,
alT1E1StatsSlot,
alT1E1StatsConn,
alT1E1StatsLineStatus,
alT1E1StatsElapsedSecs,
alT1E1StatsBPVs,
alT1E1StatsESs,
alT1E1StatsSESs,
alT1E1StatsBESs,
alT1E1StatsSEFSs,
alT1E1StatsUASs,
alT1E1StatsLCVs,
alT1E1StatsCSSs,
alT1E1StatsDMs,
alT1E1StatsPCVs,
alT1E1StatsLESs
}
STATUS current
DESCRIPTION
"The objects for T1/E1 configuration."
::= { alT1E1Group 2 }
END

585
snmp_mib_archive/ALTIGA-TELNET-STATS-MIB.my 2
View File

@ -1,585 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-TELNET-STATS-MIB.my: Altiga TELNET Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-TELNET-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, Gauge32, Counter32
FROM SNMPv2-SMI
RowStatus, DisplayString
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsTelnet, alTelnetGroup
FROM ALTIGA-MIB
alTelnetMibModule
FROM ALTIGA-GLOBAL-REG;
altigaTelnetStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga TELNET Statistics MIB models counters and objects that are
of management interest for telnet sessions.
Acronyms
The following acronyms are used in this document:
MIB: Management Information Base
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alTelnetMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsTelnetGlobal OBJECT IDENTIFIER ::= { alStatsTelnet 1 }
alTelnetStatsActiveSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of active Telnet sessions."
::= { alStatsTelnetGlobal 1 }
alTelnetStatsAttemptedSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of attempts made to establish Telnet sessions."
::= { alStatsTelnetGlobal 2 }
alTelnetStatsSuccessfulSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully established Telnet sessions."
::= { alStatsTelnetGlobal 3 }
alTelnetStatsInNetPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Telnet packets that were received from the network
since the system was booted."
::= { alStatsTelnetGlobal 4 }
alTelnetStatsInNetOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Telnet octets that were received from the network
since the system was booted."
::= { alStatsTelnetGlobal 5 }
alTelnetStatsInNetCmdOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets that contained Telnet commands or options
that were received from the network since the system was booted."
::= { alStatsTelnetGlobal 6 }
-- /* Syncs sequences are not yet supported, but when they are add the following:
-- /* should move it to the bottom to avoid renumbering, but this is it's pos in TNSTATS
-- alTelnetStatsSyncSeqs OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The total number of Telnet sync sequences that were received from
-- the network since the system was booted."
-- ::= { alStatsTelnetGlobal X }
alTelnetStatsInNetDropPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Telnet packets from the network that were
dropped during input processing since the system was booted."
::= { alStatsTelnetGlobal 7 }
alTelnetStatsInNetDropOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Telnet octets from the network that were
dropped during input processing since the system was booted."
::= { alStatsTelnetGlobal 8 }
-- /* Out Net
alTelnetStatsOutNetPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Telnet packets that were transmitted to the network
since the system was booted."
::= { alStatsTelnetGlobal 9 }
alTelnetStatsOutNetOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Telnet octets that were transmitted to the network
since the system was booted."
::= { alStatsTelnetGlobal 10 }
alTelnetStatsOutNetDropPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Telnet packets destined for the network that were
dropped during output processing since the system was booted."
::= { alStatsTelnetGlobal 11 }
alTelnetStatsOutNetDropOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Telnet octets destined for the network that were
dropped during output processing since the system was booted."
::= { alStatsTelnetGlobal 12 }
-- In Shell
alTelnetStatsInShPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Telnet packets that were received from the shell
since the system was booted."
::= { alStatsTelnetGlobal 13 }
alTelnetStatsInShOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Telnet octets that were received from the shell
since the system was booted."
::= { alStatsTelnetGlobal 14 }
alTelnetStatsInShDropPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Telnet packets from the shell that were
dropped during input processing since the system was booted."
::= { alStatsTelnetGlobal 15 }
alTelnetStatsInShDropOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Telnet octets from the shell that were
dropped during input processing since the system was booted."
::= { alStatsTelnetGlobal 16 }
-- Out Shell
alTelnetStatsOutShPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Telnet packets that were transmitted to the shell
since the system was booted."
::= { alStatsTelnetGlobal 17 }
alTelnetStatsOutShOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Telnet octets that were transmitted to the shell
since the system was booted."
::= { alStatsTelnetGlobal 18 }
alTelnetStatsOutShDropPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Telnet packets destined for the shell that were
dropped during output processing since the system was booted."
::= { alStatsTelnetGlobal 19 }
alTelnetStatsOutShDropOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Telnet octets destined for the shell that were
dropped during output processing since the system was booted."
::= { alStatsTelnetGlobal 20 }
-- Per session stats
alTelnetStatsSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlTelnetStatsSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of active sessions."
::= { alStatsTelnet 2 }
alTelnetStatsSessionEntry OBJECT-TYPE
SYNTAX AlTelnetStatsSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alTelnetStatsSessionTable."
INDEX { alTelnetStatsSessionId }
::= { alTelnetStatsSessionTable 1 }
AlTelnetStatsSessionEntry ::= SEQUENCE {
alTelnetStatsSessionRowStatus RowStatus,
alTelnetStatsSessionId Integer32,
alTelnetStatsSessionIpAddr IpAddress,
alTelnetStatsSessionSrcPort Integer32,
alTelnetStatsSessionName DisplayString,
alTelnetStatsSessionInNetPackets Counter32,
alTelnetStatsSessionInNetOctets Counter32,
alTelnetStatsSessionInNetCmdOctets Counter32,
-- alTelnetStatsSessionSyncSeqs Counter32,
alTelnetStatsSessionInNetDropPackets Counter32,
alTelnetStatsSessionInNetDropOctets Counter32,
alTelnetStatsSessionOutNetPackets Counter32,
alTelnetStatsSessionOutNetOctets Counter32,
alTelnetStatsSessionOutNetDropPackets Counter32,
alTelnetStatsSessionOutNetDropOctets Counter32,
alTelnetStatsSessionInShPackets Counter32,
alTelnetStatsSessionInShOctets Counter32,
alTelnetStatsSessionInShDropPackets Counter32,
alTelnetStatsSessionInShDropOctets Counter32,
alTelnetStatsSessionOutShPackets Counter32,
alTelnetStatsSessionOutShOctets Counter32,
alTelnetStatsSessionOutShDropPackets Counter32,
alTelnetStatsSessionOutShDropOctets Counter32
}
alTelnetStatsSessionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row. Used to terminate the session,
cannot be used to create a Session."
::= { alTelnetStatsSessionEntry 1 }
alTelnetStatsSessionId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Telnet session process ID, used as the
index for this row."
::= { alTelnetStatsSessionEntry 2 }
alTelnetStatsSessionIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the remote client."
::= { alTelnetStatsSessionEntry 3 }
alTelnetStatsSessionSrcPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP source port number of the remote client."
::= { alTelnetStatsSessionEntry 4 }
alTelnetStatsSessionName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Telnet session process name, used as the
index for this row."
::= { alTelnetStatsSessionEntry 5 }
alTelnetStatsSessionInNetPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The per session number of Telnet packets that were received from the network
since the system was booted."
::= { alTelnetStatsSessionEntry 6 }
alTelnetStatsSessionInNetOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The per session number of Telnet octets that were received from the network
since the system was booted."
::= { alTelnetStatsSessionEntry 7 }
alTelnetStatsSessionInNetCmdOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The per session number of octets that contained Telnet commands or options
that were received from the network since the system was booted."
::= { alTelnetStatsSessionEntry 8 }
-- Syncs sequences are not yet supported, but when they are add the following:
-- should move it to the bottom to avoid renumbering, but this is it's pos in TNSTATS
-- alTelnetStatsSessionSyncSeqs OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The per session number of Telnet sync sequences that were received from
-- the network since the system was booted."
-- ::= { alTelnetStatsSessionEntry XX }
alTelnetStatsSessionInNetDropPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The per session number of Telnet packets from the network that were
dropped during input processing since the system was booted."
::= { alTelnetStatsSessionEntry 9 }
alTelnetStatsSessionInNetDropOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The per session number of Telnet octets from the network that were
dropped during input processing since the system was booted."
::= { alTelnetStatsSessionEntry 10 }
-- Out Net
alTelnetStatsSessionOutNetPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The per session number of Telnet packets that were transmitted to the network
since the system was booted."
::= { alTelnetStatsSessionEntry 11 }
alTelnetStatsSessionOutNetOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The per session number of Telnet octets that were transmitted to the network
since the system was booted."
::= { alTelnetStatsSessionEntry 12 }
alTelnetStatsSessionOutNetDropPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The per session number of Telnet packets destined for the network that were
dropped during output processing since the system was booted."
::= { alTelnetStatsSessionEntry 13 }
alTelnetStatsSessionOutNetDropOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The per session number of Telnet octets destined for the network that were
dropped during output processing since the system was booted."
::= { alTelnetStatsSessionEntry 14 }
-- In Shell
alTelnetStatsSessionInShPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The per session number of Telnet packets that were received from the shell
since the system was booted."
::= { alTelnetStatsSessionEntry 15 }
alTelnetStatsSessionInShOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The per session number of Telnet octets that were received from the shell
since the system was booted."
::= { alTelnetStatsSessionEntry 16 }
alTelnetStatsSessionInShDropPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The per session number of Telnet packets from the shell that were
dropped during input processing since the system was booted."
::= { alTelnetStatsSessionEntry 17 }
alTelnetStatsSessionInShDropOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The per session number of Telnet octets from the shell that were
dropped during input processing since the system was booted."
::= { alTelnetStatsSessionEntry 18 }
-- Out Shell
alTelnetStatsSessionOutShPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The per session number of Telnet packets that were transmitted to the shell
since the system was booted."
::= { alTelnetStatsSessionEntry 19 }
alTelnetStatsSessionOutShOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The per session number of Telnet octets that were transmitted to the shell
since the system was booted."
::= { alTelnetStatsSessionEntry 20 }
alTelnetStatsSessionOutShDropPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The per session number of Telnet packets destined for the shell that were
dropped during output processing since the system was booted."
::= { alTelnetStatsSessionEntry 21 }
alTelnetStatsSessionOutShDropOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The per session number of Telnet octets destined for the shell that were
dropped during output processing since the system was booted."
::= { alTelnetStatsSessionEntry 22 }
altigaTelnetStatsMibConformance OBJECT IDENTIFIER ::= { altigaTelnetStatsMibModule 1 }
altigaTelnetStatsMibCompliances OBJECT IDENTIFIER ::= { altigaTelnetStatsMibConformance 1 }
altigaTelnetStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga Telnet Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaTelnetStatsGroup
}
::= { altigaTelnetStatsMibCompliances 1 }
altigaTelnetStatsGroup OBJECT-GROUP
OBJECTS
{
alTelnetStatsActiveSessions,
alTelnetStatsAttemptedSessions,
alTelnetStatsSuccessfulSessions,
alTelnetStatsInNetPackets,
alTelnetStatsInNetOctets,
alTelnetStatsInNetCmdOctets,
-- alTelnetStatsSyncSeqs,
alTelnetStatsInNetDropPackets,
alTelnetStatsInNetDropOctets,
alTelnetStatsOutNetPackets,
alTelnetStatsOutNetOctets,
alTelnetStatsOutNetDropPackets,
alTelnetStatsOutNetDropOctets,
alTelnetStatsInShPackets,
alTelnetStatsInShOctets,
alTelnetStatsInShDropPackets,
alTelnetStatsInShDropOctets,
alTelnetStatsOutShPackets,
alTelnetStatsOutShOctets,
alTelnetStatsOutShDropPackets,
alTelnetStatsOutShDropOctets,
alTelnetStatsSessionRowStatus,
alTelnetStatsSessionId,
alTelnetStatsSessionIpAddr,
alTelnetStatsSessionSrcPort,
alTelnetStatsSessionName,
alTelnetStatsSessionInNetPackets,
alTelnetStatsSessionInNetOctets,
alTelnetStatsSessionInNetCmdOctets,
-- alTelnetStatsSessionSyncSeqs,
alTelnetStatsSessionInNetDropPackets,
alTelnetStatsSessionInNetDropOctets,
alTelnetStatsSessionOutNetPackets,
alTelnetStatsSessionOutNetOctets,
alTelnetStatsSessionOutNetDropPackets,
alTelnetStatsSessionOutNetDropOctets,
alTelnetStatsSessionInShPackets,
alTelnetStatsSessionInShOctets,
alTelnetStatsSessionInShDropPackets,
alTelnetStatsSessionInShDropOctets,
alTelnetStatsSessionOutShPackets,
alTelnetStatsSessionOutShOctets,
alTelnetStatsSessionOutShDropPackets,
alTelnetStatsSessionOutShDropOctets
}
STATUS current
DESCRIPTION
"The objects for the Telnet Server statistics."
::= { alTelnetGroup 2 }
END

158
snmp_mib_archive/ALTIGA-VERSION-STATS-MIB.my 2
View File

@ -1,158 +0,0 @@
-- *------------------------------------------------------------------
-- * ALTIGA-VERSION-STATS-MIB.my: Altiga Version MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-VERSION-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
alStatsVersion, alVersionGroup
FROM ALTIGA-MIB
alVersionMibModule
FROM ALTIGA-GLOBAL-REG;
altigaVersionStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga (VPN 3000) Version MIB models counters and
objects that are of management interest.
Acronyms
The following acronyms are used in this document:
MIB: Management Information Base
"
REVISION "200209051300Z"
DESCRIPTION
"Initial version of this MIB module."
::= { alVersionMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsVersionGlobal OBJECT IDENTIFIER ::= { alStatsVersion 1 }
alVersionMajor OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The major release number of the VPN 3000 software. In the
release identifier 1.4.2, the 1 is the major release
number."
::= { alStatsVersionGlobal 1 }
alVersionMinor OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minor release number of the VPN 3000 software. In the
release identifier 1.4.2, the 4 is the minor release
number."
::= { alStatsVersionGlobal 2 }
alVersionInt OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The integration string of the VPN 3000 software. In the
release identifier 1.4.2, the 2 is the patch release
number."
::= { alStatsVersionGlobal 3 }
alVersionString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string representation of the VPN 3000 software
version."
::= { alStatsVersionGlobal 4 }
alVersionLong OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The long string representation of the VPN 3000 software
version."
::= { alStatsVersionGlobal 5 }
alVersionShort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The short string representation of the VPN3000 software
version."
::= { alStatsVersionGlobal 6 }
alVersionBoot OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the Boot image."
::= { alStatsVersionGlobal 7 }
altigaVersionStatsMibConformance OBJECT IDENTIFIER
::= { altigaVersionStatsMibModule 1 }
altigaVersionStatsMibCompliances OBJECT IDENTIFIER
::= { altigaVersionStatsMibConformance 1 }
altigaVersionStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga Version Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaVersionStatsGroup
}
::= { altigaVersionStatsMibCompliances 1 }
altigaVersionStatsGroup OBJECT-GROUP
OBJECTS
{
alVersionMajor,
alVersionMinor,
alVersionInt,
alVersionString,
alVersionLong,
alVersionShort,
alVersionBoot
}
STATUS current
DESCRIPTION
"The objects for the version statistics."
::= { alVersionGroup 2 }
END

378
snmp_mib_archive/APPN-DLUR-MIB.my 2
View File

@ -1,378 +0,0 @@
-- *****************************************************************
-- APPN DLUR MIB
--
-- Jan 1996, Barry Chan
--
-- Copyright (c) 1996 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
-- This mib was extracted from RFC xxxx
APPN-DLUR-MIB DEFINITIONS ::= BEGIN
-- ***********************************************************************
-- MIB for APPN Dependent LU Requester
--
-- This MIB contains information that is useful for the management of an
-- APPN product that implements DLUR (Dependent Logical Unit Requester).
-- This DLUR product has a client/server relationship with an APPN product
-- that implements DLUR (Dependent Logical Unit Server).
--
-- This MIB has three groups:
--
--
-- dlurNodeCapabilities * information about the DLUR implementation
--
-- dlurPuInfo * information about the PUs supported by DLUR
--
-- (this MIB assumes the presence of the IETF
-- NAU MIB, which provides a standard model
-- for representing PU configurations)
--
-- dlurDlurInfo * information about the DLUS nodes that this
-- DLUR node has sessions with
-- ***********************************************************************
IMPORTS
enterprises
FROM RFC1155-SMI
DisplayString
FROM RFC1213-MIB
OBJECT-TYPE
FROM RFC-1212;
-- *************** The appnDlur registration point ********************
ibm OBJECT IDENTIFIER ::= { enterprises 2 }
ibmArchitecture OBJECT IDENTIFIER ::= { ibm 5 }
appnDlur OBJECT IDENTIFIER ::= { ibmArchitecture 12 }
-- ********************************************************************
-- DLUR Capabilities of the node
--
-- This group represents the capabilities and options of the DLUR
-- implementation.
-- ********************************************************************
dlurNodeCapabilities OBJECT IDENTIFIER ::= { appnDlur 1 }
dlurReleaseLevel OBJECT-TYPE
SYNTAX DisplayString (SIZE (2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The DLUR release level of this implementation. This is the
value that is encoded in the DLUR/DLUS Capabilities (CV51).
To insure consistent display, this one-byte value is encoded
here as two displayable characters that are equivalent to a
hexidecimal display. For example, if the one-byte value as
encoded in CV51 is X' 1', this object will contain the
displayable string ' 1'."
::= { dlurNodeCapabilities 1 }
dlurANSsupport OBJECT-TYPE
SYNTAX INTEGER {
continueOrStop(1),
stopOnly(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Automatic Network Shutdown capability of this node.
'continueOrStop' indicates that the DLUR implementation
supports either ANS value (continue or stop) as specified by the
SLU on ACTPU value of stop.
'stopOnly' indicates that the DLUR implementation only
supports the AND value of stop.
ANS = continue means that the DLUR node will keep LU-LU sessions
active even is the SSCP-PU and SSCP-LU control sessions are interrupted.
ANS = stop means that LU-LU sessions will be interrupted when the
SSCP-PU and SSCP-LU sessions are interrupted."
::= { dlurNodeCapabilities 2 }
dlurMultiSubnetSupport OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Capability of this implementation to support CP-SVR sessions
that cross NETID boundaries.
'yes' means that these sessions can cross NETID boundaries.
'no' means that these sessions cannot cross NETID boundaries."
::= { dlurNodeCapabilities 3 }
-- **************************************************************************
-- DLUR-unique Information about the PUs
--
-- The following talbe carries DLUR-unique information about the PUs
-- that this APPN node is supporting via DLUR. Notice that this table
-- is intended to supplement the snaNodeAdminTable and snaNodeOperTable
-- in the IETF NAU MIB. Those tables provide a general purpose method
-- for representing information about a set of PU resources.
-- **************************************************************************
dlurPuInfo OBJECT IDENTIFIER ::= { appnDlur 2 }
dlurPuTable OBJECT-TYPE
SYNTAX SEQUENCE OF DlurPuEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"DLUr-unique information about supported PUs."
::= { dlurPuInfo 1 }
dlurPuEntry OBJECT-TYPE
SYNTAX DlurPuEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry in table of DLUR-unique information about PUs."
INDEX
{ dlurPuIndex }
::= { dlurPuTable 1 }
DlurPuEntry ::= SEQUENCE {
dlurPuIndex
INTEGER,
dlurPuName
DisplayString,
dlurPuStatus
INTEGER,
dlurPuANSsupport
INTEGER,
dlurPuLocation
INTEGER,
dlurPuDlusSessnStatus
INTEGER,
dlurPuActiveDlusName
DisplayString,
dlurPuDefPrimDlusName
DisplayString,
dlurPuDefBackDlusName
DisplayString
}
dlurPuIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object has the same value as snaNodeAdminIndex
in the snaNodeAdminEntry and snaNodeOperEntry entries of the
IETF SNA NAU MIB that provide information about the same PU."
::= { dlurPuEntry 1 }
dlurPuName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The SNA name of the PU. This value is expressed as
NETID.PUNAME, including the perios (.). If the NETID is
not known, the PU name alone is provided. A null string
indicates that the value is unavailable."
::= { dlurPuEntry 2 }
dlurPuStatus OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
pendReqActRsp(2),
pendActpu(3),
pendActpuRsp(4),
active(5),
pendLinkact(6),
pendDactpuRsp(7),
pendInop(8),
pendInopActpu(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of the DLUR-supported PU.
This is a more detailed enumeration os the state of the PU
than is found in the ANU MB."
::= { dlurPuEntry 3 }
dlurPuANSsupport OBJECT-TYPE
SYNTAX INTEGER {
continue(1),
stop(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Automatic Network Shutdown (AND) support configured for this
PU. This value (as configured by the network administrator) is
sent by the DLUS with ACTPU for each PU.
'continue' means that the DLUR node will attempt to keep LU-LU
sessions active even is the SSCP-PU and SSCP-LU control sessions
are interrupted.
'stop' means that LU-LU sessions will be interrupted when the
SSCP-PU and SSCP-LU sessions are interrupted."
::= { dlurPuEntry 4 }
dlurPuLocation OBJECT-TYPE
SYNTAX INTEGER {
internal(1),
downstream(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Location of the DLUR-supported PU. Either internal to the APPN
node itself (no link)_ or downstream of the APPN node
(connected via a link)."
::= { dlurPuEntry 5 }
dlurPuDlusSessnStatus OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
pendingActive(2),
active(3),
pendingInactive(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of the control session to the DLUS identified in
dlurPuActiveDlusName. This is a combination os
the separate states for the conwinner and conloser sessions."
::= { dlurPuEntry 6 }
dlurPuActiveDlusName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The SNA name of the active DLUS. This value is expressed as
NETID.CPNAME, including the periois (.). A null string
indicates that the value is unavailable."
::= { dlurPuEntry 7 }
dlurPuDefPrimDlusName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The SNA name os the defined primary DLUS for this PU.
Expressed as NETID.CPNAME, including the period (.).
A null string indicates that he value is unavailable."
::= { dlurPuEntry 8 }
dlurPuDefBackDlusName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The SNA name of the defined backup DLUR for this PU.
Expressed as NETID.CPNAME, including the period (.).
A null string indicates that the value is unavailable."
::= { dlurPuEntry 9 }
-- ***********************************************************************
-- DLUS Control Sessions (CP-SVR Pipes)
--
-- This table contains information about DLUS control sessions (also known
-- as CP-SVR pipes). Although DLUR uses a pair of CP-SVR sessions for
-- communication, for purposes of status, information about those two
-- sessions is combined to yield a single status for the request/server
-- connection.
-- ***********************************************************************
dlurDlusInfo OBJECT IDENTIFIER ::= { appnDlur 3 }
dlurDlusTable OBJECT-TYPE
SYNTAX SEQUENCE OF DlurDlusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about DLUS control sessions."
::= { dlurDlusInfo 1 }
dlurDlusEntry OBJECT-TYPE
SYNTAX DlurDlusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry in table of information about DLUS control sessions."
INDEX
{ dlurDlusIndex }
::= { dlurDlusTable 1 }
DlurDlusEntry ::= SEQUENCE {
dlurDlusIndex
INTEGER,
dlurDlusName
DisplayString,
dlurDlusSessnStatus
INTEGER
}
dlurDlusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index to the table."
::= { dlurDlusEntry 1 }
dlurDlusName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The SNA name of the DLUS. This value is expressed as
NETID.CPNAME, including the period (.). A null string
indicates that the value is unavailable."
::= { dlurDlusEntry 2 }
dlurDlusSessnStatus OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
pendingActive(2),
active(3),
pendingInactive(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of the session with the DLUS. This is the combination os
the separate states for the conwinner and conloser sessions."
::= { dlurDlusEntry 3 }
END

6028
snmp_mib_archive/APPN-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

523
snmp_mib_archive/APPN-TRAP-MIB.my 2
View File

@ -1,523 +0,0 @@
-- *****************************************************************
-- APPN Trap MIB
--
-- May 1999, Patrick Tate
--
-- Copyright (c) 1999 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
APPN-TRAP-MIB DEFINITIONS ::= BEGIN
IMPORTS
Counter32, OBJECT-TYPE, MODULE-IDENTITY,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
appnMIB, appnIsInP2SFmdPius, appnIsInS2PFmdPius,
appnIsInP2SNonFmdPius, appnIsInS2PNonFmdPius,
appnIsInP2SFmdBytes, appnIsInS2PFmdBytes,
appnIsInP2SNonFmdBytes, appnIsInS2PNonFmdBytes,
appnIsInSessUpTime, appnObjects,
appnLocalTgOperational, appnLocalTgCpCpSession,
appnPortOperState, appnLsOperState,
appnCompliances, appnGroups
FROM APPN-MIB
dlurDlusSessnStatus
FROM APPN-DLUR-MIB;
appnTrapMIB MODULE-IDENTITY
LAST-UPDATED "9808310000Z" -- August 31, 1998
ORGANIZATION "IETF SNA NAU MIB WG / AIW APPN MIBs SIG"
CONTACT-INFO
"
Bob Clouston
Cisco Systems
7025 Kit Creek Road
P.O. Box 14987
Research Triangle Park, NC 27709, USA
Tel: 1 919 472 2333
E-mail: clouston@cisco.com
Bob Moore
IBM Corporation
4205 S. Miami Boulevard
BRQA/501
P.O. Box 12195
Research Triangle Park, NC 27709, USA
Tel: 1 919 254 4436
E-mail: remoore@us.ibm.com
"
DESCRIPTION
"This MIB module defines notifications to be generated by
network devices with APPN capabilities. It presupposes
support for the APPN MIB. It also presupposes
support for the DLUR MIB for implementations
that support the DLUR-related groups."
::= { appnMIB 0 }
-- *********************************************************************
-- Notifications
-- *********************************************************************
appnIsrAccountingDataTrap NOTIFICATION-TYPE
OBJECTS {
appnIsInP2SFmdPius,
appnIsInS2PFmdPius,
appnIsInP2SNonFmdPius,
appnIsInS2PNonFmdPius,
appnIsInP2SFmdBytes,
appnIsInS2PFmdBytes,
appnIsInP2SNonFmdBytes,
appnIsInS2PNonFmdBytes,
appnIsInSessUpTime
}
STATUS current
DESCRIPTION
"When it has been enabled, this notification is generated by an
APPN node whenever an ISR session passing through the node is
taken down, regardless of whether the session went down
normally or abnormally. Its purpose is to allow a management
application (primarily an accounting application) that is
monitoring the ISR counts to receive the final values of these
counts, so that the application can properly account for the
amounts the counts were incremented since the last time the
application polled them. The appnIsInSessUpTime object
provides the total amount of time that the session was active.
This notification is not a substitute for polling the ISR
counts. In particular, the count values reported in this
notification cannot be assumed to be the complete totals for
the life of the session, since they may have wrapped while the
session was up.
The session to which the objects in this notification apply is
identified by the fully qualified CP name and PCID that make up
the table index. An instance of this notification will contain
exactly one instance of each of its objects, and these objects
will all belong to the same conceptual row of the
appnIsInTable.
Generation of this notification is controlled by the same
object in the APPN MIB, appnIsInGlobeCtrAdminStatus, that
controls whether the count objects themselves are being
incremented."
::= { appnTrapMIB 1 }
appnLocalTgOperStateChangeTrap NOTIFICATION-TYPE
OBJECTS {
appnLocalTgTableChanges,
appnLocalTgOperational
}
STATUS current
DESCRIPTION
"When it has been enabled, this notification makes it possible
for an APPN topology application to get asynchronous
notifications of local TG operational state changes,
and thus to reduce the frequency with which it polls
for these changes.
This notification is sent whenever there is a change to
the appnLocalTgOperational object in a row of the
appnLocalTgTable. This notification is only sent for row
creation if the row is created with a value of 'true' for
appnLocalTgOperational. This notification is only sent for
row deletion if the last value of appnLocalTgOperational was
'true'. In this case, the value of appnLocalTgOperational
in the notification shall be 'false', since the deletion of
a row indicates that the TG is no longer operational.
The notification is more than a simple 'poll me now' indication.
It carries both a count of local TG topology changes, and the
current operational state itself. The count of changes allows an
application to detect lost notifications, either when polling
or upon receiving a subsequent notification, at which point it
knows it must retrieve the entire appnLocalTgTable again.
This is the same count as used in the appnLocalCpCpStateChangeTrap.
A lost notification could indicate a local TG CP-CP session state
change or an operational state change.
Generation of this notification is controlled by the
appnTrapControl object."
::= { appnTrapMIB 2 }
appnLocalTgCpCpChangeTrap NOTIFICATION-TYPE
OBJECTS {
appnLocalTgTableChanges,
appnLocalTgCpCpSession
}
STATUS current
DESCRIPTION
"When it has been enabled, this notification makes it possible
for an APPN topology application to get asynchronous
notifications of local TG control-point to control-point (CP-CP)
session state changes, and thus to reduce the
frequency with which it polls for these changes.
This notification is sent whenever there is a change to
the appnLocalTgCpCpSession object but NOT the
appnLocalTgOperational object in a row of the appnLocalTgTable.
This notification is never sent for appnLocalTgTable row
creation or deletion.
The notification is more than a simple 'poll me now' indication.
It carries both a count of local TG topology changes, and the
current CP-CP session state itself. The count of changes allows
an application to detect lost notifications, either when polling
or upon receiving a subsequent notification, at which point it
knows it must retrieve the entire appnLocalTgTable again. This
is the same count as used in the appnLocalTgOperStateChangeTrap.
A lost notification could indicate a local TG CP-CP session
state change or an operational state change.
Generation of this notification is controlled by the
appnTrapControl object."
::= { appnTrapMIB 3 }
appnPortOperStateChangeTrap NOTIFICATION-TYPE
OBJECTS {
appnPortTableChanges,
appnPortOperState
}
STATUS current
DESCRIPTION
"When it has been enabled, this notification makes it possible
for an APPN topology application to get asynchronous
notifications of port operational state changes, and thus to
reduce the frequency with which it polls for these changes.
This notification is only sent when a appnPortOperState has
transitioned to a value of 'active' or 'inactive'.
This notification is sent whenever there is a appnPortOperState
object transition to 'inactive' or 'active' state in the
appnPortTable. This notification is only sent for row creation
if the row is created with a value of 'active' for
appnPortOperState. This notification is only sent for
row deletion if the last value of appnPortOperState was
'active'. In this case, the value of appnPortOperState
in the notification shall be 'inactive', since the deletion of
a row indicates that the port is no longer active.
The notification is more than a simple 'poll me now' indication.
It carries both a count of port table changes, and the
operational state itself. The count of changes allows an
application to detect lost notifications, either when polling
or upon receiving a subsequent notification, at which point
it knows it must retrieve the entire appnPortTable again.
Generation of this notification is controlled by the
appnTrapControl object."
::= { appnTrapMIB 4 }
appnLsOperStateChangeTrap NOTIFICATION-TYPE
OBJECTS {
appnLsTableChanges,
appnLsOperState
}
STATUS current
DESCRIPTION
"When it has been enabled, this notification makes it possible
for an APPN topology application to get asynchronous
notifications of link station operational state changes, and
thus to reduce the frequency with which it polls for these
changes. This notification is only sent when a appnLsOperState
has transitioned to a value of 'active' or 'inactive'.
This notification is sent whenever there is a appnLsOperState
object transition to 'inactive' or 'active' state in the
appnLsTable. This notification is only sent for row creation
if the row is created with a value of 'active' for
appnLsOperState. This notification is only sent for
row deletion if the last value of appnLsOperState was
'active'. In this case, the value of appnLsOperState
in the notification shall be 'inactive', since the deletion of
a row indicates that the link station is no longer active.
The notification is more than a simple 'poll me now' indication.
It carries both a count of link station table changes, and the
operational state itself. The count of changes allows an
application to detect lost notifications, either when polling
or upon receiving a subsequent notification, at which point it
knows it must retrieve the entire appnLsTable again.
Generation of this notification is controlled by the
appnTrapControl object."
::= { appnTrapMIB 5 }
dlurDlusStateChangeTrap NOTIFICATION-TYPE
OBJECTS {
dlurDlusTableChanges,
dlurDlusSessnStatus
}
STATUS current
DESCRIPTION
"When it has been enabled, this notification makes it possible
for an APPN topology application to get asynchronous
notifications of DLUR-DLUS session changes, and thus to reduce
the frequency with which it polls for these changes.
This notification is sent whenever there is a dlurDlusSessnStatus
object transition to 'inactive' or 'active' state in the
dlurDlusTable. This notification is only sent for row creation
if the row is created with a value of 'active' for
dlurDlusSessnStatus. This notification is only sent for
row deletion if the last value of dlurDlusSessnStatus was
'active'. In this case, the value of dlurDlusSessnStatus
in the notification shall be 'inactive', since the deletion of
a row indicates that the session is no longer active.
The notification is more than a simple 'poll me now' indication.
It carries both a count of DLUR-DLUS table changes, and the
session status itself. The count of changes allows an
application to detect lost notifications, either when polling
or upon receiving a subsequent notification, at which point it
knows it must retrieve the entire dlurDlusTable again.
Generation of this notification is controlled by the
appnTrapControl object."
::= { appnTrapMIB 6 }
-- *********************************************************************
-- Supporting Objects
-- *********************************************************************
appnTrapObjects OBJECT IDENTIFIER ::= { appnObjects 7 }
appnTrapControl OBJECT-TYPE
SYNTAX BITS {
appnLocalTgOperStateChangeTrap(0),
appnLocalTgCpCpChangeTrap(1),
appnPortOperStateChangeTrap(2),
appnLsOperStateChangeTrap(3),
dlurDlusStateChangeTrap(4)
-- add other notification types here
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An object to turn APPN notification generation on and off.
Setting a notification type's bit to 1 enables generation of
notifications of that type, subject to further filtering
resulting from entries in the snmpNotificationMIB. Setting
this bit to 0 disables generation of notifications of that
type.
Note that generation of the appnIsrAccountingDataTrap is
controlled by the appnIsInGlobeCtrAdminStatus object in
the APPN MIB: if counts of intermediate session traffic
are being kept at all, then the notification is also enabled."
::= { appnTrapObjects 1 }
appnLocalTgTableChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a row in the appnLocalTgTable
has changed status since the APPN node was last reinitialized.
This counter is incremented whenever a condition is detected
that would cause a appnLocalTgOperStateChangeTrap or
appnLocalTgCpCpChangeTrap notification to be sent, whether
or not those notifications are enabled."
::= { appnTrapObjects 2 }
appnPortTableChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a row in the appnPortTable
has changed status since the APPN node was last reinitialized.
This counter is incremented whenever a condition is detected
that would cause a appnPortOperStateChangeTrap notification
to be sent, whether or not this notification is enabled."
::= { appnTrapObjects 3 }
appnLsTableChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a row in the appnLsTable
has changed status since the APPN node was last reinitialized.
This counter is incremented whenever a condition is detected
that would cause a appnLsOperStateChangeTrap notification
to be sent, whether or not this notification is enabled."
::= { appnTrapObjects 4 }
dlurDlusTableChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a row in the dlurDlusTable
has changed status since the APPN node was last reinitialized.
This counter is incremented whenever a condition is detected
that would cause a dlurDlusStateChangeTrap notification
to be sent, whether or not this notification is enabled."
::= { appnTrapObjects 5 }
-- *********************************************************************
-- Conformance information
-- *********************************************************************
-- Tie into the conformance structure in the APPN MIB:
-- appnConformance OBJECT IDENTIFIER ::= {appnMIB 3 }
--
-- appnCompliances OBJECT IDENTIFIER ::= {appnConformance 1 }
-- appnGroups OBJECT IDENTIFIER ::= {appnConformance 2 }
-- Compliance statement
appnTrapMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the SNMP entities that
implement the APPN-TRAP-MIB."
MODULE -- this module
-- Conditionally mandatory groups
GROUP appnTrapMibIsrNotifGroup
DESCRIPTION
"This group is mandatory for APPN nodes supporting
reporting of final ISR counter values via notifications."
GROUP appnTrapMibTopoConfGroup
DESCRIPTION
"This group is mandatory for APPN nodes supporting
polling reduction for local topology."
GROUP appnTrapMibTopoNotifGroup
DESCRIPTION
"This group is mandatory for APPN nodes supporting
polling reduction for local topology."
GROUP appnTrapMibDlurConfGroup
DESCRIPTION
"This group is mandatory for APPN nodes supporting
polling reduction for the dlurDlusTable."
GROUP appnTrapMibDlurNotifGroup
DESCRIPTION
"This group is mandatory for APPN nodes supporting
polling reduction for the dlurDlusTable."
OBJECT appnTrapControl
MIN-ACCESS read-only
DESCRIPTION
"An agent is not required to support a set to
this object."
::= {appnCompliances 2 }
-- Units of conformance
appnTrapMibIsrNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
appnIsrAccountingDataTrap
}
STATUS current
DESCRIPTION
"A notification for reporting the final values of the
APPN MIB's ISR counters."
::= { appnGroups 21 }
appnTrapMibTopoConfGroup OBJECT-GROUP
OBJECTS {
appnTrapControl,
appnLocalTgTableChanges,
appnPortTableChanges,
appnLsTableChanges
}
STATUS current
DESCRIPTION
"A collection of objects for reducing the polling
associated with the local topology tables in the
APPN MIB. Nodes that implement this group SHALL
also implement the appnTrapMibTopoNotifGroup."
::= { appnGroups 22 }
appnTrapMibTopoNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
appnLocalTgOperStateChangeTrap,
appnLocalTgCpCpChangeTrap,
appnPortOperStateChangeTrap,
appnLsOperStateChangeTrap
}
STATUS current
DESCRIPTION
"A collection of notifications for reducing the polling
associated with the local topology tables in the
APPN MIB. Nodes that implement this group SHALL
also implement the appnTrapMibTopoConfGroup."
::= { appnGroups 23 }
appnTrapMibDlurConfGroup OBJECT-GROUP
OBJECTS {
appnTrapControl,
dlurDlusTableChanges
}
STATUS current
DESCRIPTION
"A collection of objects for reducing the polling
associated with the dlurDlusTable in the DLUR
MIB. Nodes that implement this group SHALL also
implement the appnTrapMibDlurNotifGroup."
::= { appnGroups 24 }
appnTrapMibDlurNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
dlurDlusStateChangeTrap
}
STATUS current
DESCRIPTION
"A notification for reducing the polling associated
with the dlurDlusTable in the DLUR MIB. Nodes that
implement this group SHALL also implement the
appnTrapMibDlurConfGroup."
::= { appnGroups 25 }
END

465
snmp_mib_archive/ATM-ACCOUNTING-INFORMATION-MIB.my 2
View File

@ -1,465 +0,0 @@
-- *****************************************************************
-- ATM Accounting Information MIB
--
-- Feb 1997, Vasmi Abidi
--
-- Copyright (c) 1996-1997, 1998 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
-- This mib was extracted from an IETF Draft.
-- It currently uses a ciscoExperiment number.
ATM-ACCOUNTING-INFORMATION-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
Integer32,
Counter64 FROM SNMPv2-SMI
DisplayString, DateAndTime, TEXTUAL-CONVENTION
FROM SNMPv2-TC
ciscoExperiment FROM CISCO-SMI;
atmAccountingInformationMIB MODULE-IDENTITY
LAST-UPDATED "9711050000Z"
ORGANIZATION "IETF AToM MIB Working Group"
CONTACT-INFO "
Keith McCloghrie
Cisco Systems, Inc.
170 West Tasman Drive,
San Jose CA 95134-1706.
Phone: +1 408 526 5260
Email: kzm@cisco.com"
DESCRIPTION
"The MIB module for identifying items of accounting
information which are applicable to ATM connections."
REVISION "9711050000Z"
DESCRIPTION
"Added objects atmAcctngTransmittedPeakCells and
atmAcctngReceivedPeakCells."
::= { ciscoExperiment 18 }
atmAcctngMIBObjects OBJECT IDENTIFIER ::= { atmAccountingInformationMIB 1 }
AtmAddr ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The ATM address used by the network entity.
The address types are: no address (0 octets),
E.164 (8 octets), and NSAP (20 octets).
Note: The E.164 address is encoded in BCD
format."
SYNTAX OCTET STRING (SIZE(0|8|20))
-- Definitions of objects for use in specifying ATM accounting
-- data to be collected
atmAcctngDataObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This identifier defines a subtree under which various
objects are defined such that a set of objects to be
collected as ATM accounting data can be specified as a
(subtree, list) tuple using this identifier as the subtree."
::= { atmAcctngMIBObjects 1 }
-- Objects defined under the atmAcctngDataObjects subtree
--
-- In each case the semantics of the object are interpreted with
-- respect to the creation/storage of an accounting record for a
-- particular connection on a particular interface.
atmAcctngConnectionType OBJECT-TYPE
SYNTAX INTEGER { pvc(1),
pvp(2),
svcIncoming(3),
svcOutgoing(4),
svpIncoming(5),
svpOutgoing(6),
spvcInitiator(7),
spvcTarget(8),
spvpInitiator(9),
spvpTarget(10) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of connection."
::= { atmAcctngDataObjects 1 }
atmAcctngCastType OBJECT-TYPE
SYNTAX INTEGER { p2p(1), p2mp(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An indication of whether the connection is point-to-point
or point-to-multipoint."
::= { atmAcctngDataObjects 2 }
atmAcctngIfName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A textual name for the interface on which the data for the
connection was collected. If the local SNMP agent supports
the object ifName, the value of this object must be
identical that of ifName in the conceptual row of the
ifTable corresponding to this interface."
::= { atmAcctngDataObjects 3 }
atmAcctngIfAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 'alias' name for the interface as specified by a
network manager, e.g., via a management set operation to
modify the relevant instance of the ifAlias object. Note
that in contrast to ifIndex, ifAlias provides a non-volatile
'handle' for the interface, the value of which is retained
across agent reboots."
::= { atmAcctngDataObjects 4 }
atmAcctngVpi OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VPI used for the connection."
::= { atmAcctngDataObjects 5 }
atmAcctngVci OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VCI used for the connection."
::= { atmAcctngDataObjects 6 }
atmAcctngCallingParty OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The connection's calling party. If unknown (e.g., for a
PVC), then the value of this object is the zero-length
string."
::= { atmAcctngDataObjects 7 }
atmAcctngCalledParty OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The connection's called party. If unknown (e.g., for a
PVC), then the value of this object is the zero-length
string."
::= { atmAcctngDataObjects 8 }
atmAcctngCallReference OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..3))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The connection's call reference value (e.g., from Q.2931).
If unknown (e.g., for a PVC), then the value of this object
is the zero-length string."
::= { atmAcctngDataObjects 9 }
atmAcctngStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The time when the connection was established."
::= { atmAcctngDataObjects 10 }
atmAcctngCollectionTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The time at which the data in this record was collected."
::= { atmAcctngDataObjects 11 }
atmAcctngCollectMode OBJECT-TYPE
SYNTAX INTEGER { onRelease(1),
periodically(2),
onCommand(3) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The reason why this connection data was collected."
::= { atmAcctngDataObjects 12 }
atmAcctngReleaseCause OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If the connection data was collected because of the release
of an SVC, then this is the cause code in the Release
message for the connection; otherwise, this object has the
value zero."
::= { atmAcctngDataObjects 13 }
atmAcctngServiceCategory OBJECT-TYPE
SYNTAX INTEGER { other(1), cbr(2), vbrRt(3), vbrNrt(4),
abr(5), ubr(6), unknown(7) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The connection's service category."
::= { atmAcctngDataObjects 14 }
atmAcctngTransmittedCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of cells, including OAM cells, transmitted by
this switch on this connection."
::= { atmAcctngDataObjects 15 }
atmAcctngTransmittedClp0Cells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of cells with CLP=0, including OAM cells,
transmitted by this switch on this connection."
::= { atmAcctngDataObjects 16 }
atmAcctngReceivedCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of cells, including OAM cells, received by this
switch on this connection."
::= { atmAcctngDataObjects 17 }
atmAcctngReceivedClp0Cells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of cells with CLP=0, including OAM cells,
received by this switch on this connection."
::= { atmAcctngDataObjects 18 }
atmAcctngTransmitTrafficDescriptorType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The traffic descriptor type (as defined in RFC 1695 and its
successors) in the direction in which the switch transmits
cells on the connection."
REFERENCE
"See atmTrafficDescriptorTypes in ATM-MIB.my in RFC 1695 and
its successors."
::= { atmAcctngDataObjects 19 }
atmAcctngTransmitTrafficDescriptorParam1 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The first traffic descriptor parameter in the direction in
which this switch transmits cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngTransmitTrafficDescriptorType."
::= { atmAcctngDataObjects 20 }
atmAcctngTransmitTrafficDescriptorParam2 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The second traffic descriptor parameter in the direction in
which this switch transmits cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngTransmitTrafficDescriptorType."
::= { atmAcctngDataObjects 21 }
atmAcctngTransmitTrafficDescriptorParam3 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The third traffic descriptor parameter in the direction in
which this switch transmits cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngTransmitTrafficDescriptorType."
::= { atmAcctngDataObjects 22 }
atmAcctngTransmitTrafficDescriptorParam4 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The fourth traffic descriptor parameter in the direction in
which this switch transmits cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngTransmitTrafficDescriptorType."
::= { atmAcctngDataObjects 23 }
atmAcctngTransmitTrafficDescriptorParam5 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The fifth traffic descriptor parameter in the direction in
which this switch transmits cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngTransmitTrafficDescriptorType."
::= { atmAcctngDataObjects 24 }
atmAcctngReceiveTrafficDescriptorType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The traffic descriptor type (as defined in RFC 1695 and its
successors) in the direction in which this switch receives
cells on this connection."
REFERENCE
"See atmTrafficDescriptorTypes in ATM-MIB.my in RFC 1695 and
its successors."
::= { atmAcctngDataObjects 25 }
atmAcctngReceiveTrafficDescriptorParam1 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The first traffic descriptor parameter in the direction in
which this switch receives cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngReceiveTrafficDescriptorType."
::= { atmAcctngDataObjects 26 }
atmAcctngReceiveTrafficDescriptorParam2 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The second traffic descriptor parameter in the direction in
which this switch receives cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngReceiveTrafficDescriptorType."
::= { atmAcctngDataObjects 27 }
atmAcctngReceiveTrafficDescriptorParam3 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The third traffic descriptor parameter in the direction in
which this switch receives cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngReceiveTrafficDescriptorType."
::= { atmAcctngDataObjects 28 }
atmAcctngReceiveTrafficDescriptorParam4 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The fourth traffic descriptor parameter in the direction in
which this switch receives cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngReceiveTrafficDescriptorType."
::= { atmAcctngDataObjects 29 }
atmAcctngReceiveTrafficDescriptorParam5 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The fifth traffic descriptor parameter in the direction in
which this switch receives cells on this connection.
Interpretation of this parameter is dependent on the value
of atmAcctngReceiveTrafficDescriptorType."
::= { atmAcctngDataObjects 30 }
atmAcctngCallingPartySubAddress OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The connection's calling party sub-address. If the
connection has no calling party sub-address, or it's value
is unknown, then the value of this object is the zero-length
string."
::= { atmAcctngDataObjects 31 }
atmAcctngCalledPartySubAddress OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The connection's called party sub-address. If the
connection has no called party sub-address, or it's value is
unknown, then the value of this object is the zero-length
string."
::= { atmAcctngDataObjects 32 }
atmAcctngRecordCrc16 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the CRC-16 checksum (as defined by ISO 3309
(HDLC) and/or ITU X.25) calculated over the accounting
record containing this object.
While the mechanism for calculating/encoding the checksum
value is specific to the method of encoding the accounting
record, an accounting record containing this object is
typically generated by initializing the value of this object
to the all-zeros string ('0000'H), with the location of
these zeros being saved. After generating the record, the
checksum is calculated over the whole connection record and
then the all-zeros value is overwritten (at the saved
location) by the calculated value of the checksum."
::= { atmAcctngDataObjects 33 }
atmAcctngTransmittedPeakCells OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of cells transmitted on the connection within
the peak 5-second sub-interval, where the peak sub-interval
is the one having the highest value of any sub-interval in
the current/completing accounting period. One accounting
period ends and the next starts at the time of each
'periodic' collection of accounting information. A value
of '-1' indicates that no peak value is available."
::= { atmAcctngDataObjects 34 }
atmAcctngReceivedPeakCells OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of cells received on the connection within
the peak 5-second sub-interval, where the peak sub-interval
is the one having the highest value of any sub-interval in
the current/completing accounting period. One accounting
period ends and the next starts at the time of each
'periodic' collection of accounting information. A value
of '-1' indicates that no peak value is available."
::= { atmAcctngDataObjects 35 }
END

288
snmp_mib_archive/ATM-FORUM-ADDR-REG.my 2
View File

@ -1,288 +0,0 @@
--------------------------------------------------------------------
-- ATM Address Registration MIB
--
-- March, 1995; Kartik Chandrasekhar
--
-- Copyright (c) 1995-1997 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
ATM-FORUM-ADDR-REG DEFINITIONS ::= BEGIN
IMPORTS
atmfNetPrefixGroup,
atmfAddressGroup,
atmfAddressRegistrationAdminGroup,
AtmAddress,
NetPrefix FROM ATM-FORUM-TC-MIB
OBJECT-TYPE FROM RFC-1212;
-- The NetPrefix Group
--
-- The Network Prefix Table is implemented by the user-side IME.
atmfNetPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfNetPrefixEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table implemented by the user-side IME, containing the
network-prefix(es) for ATM-layer addresses in effect on
the user side of the UNI."
::= { atmfNetPrefixGroup 1 }
atmfNetPrefixEntry OBJECT-TYPE
SYNTAX AtmfNetPrefixEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a single network-prefix for
ATM-layer addresses in effect on the user-side IME.
Note that the index variable atmNetPrefixPrefix is a
variable-length string, and as such the rule for
variable-length strings in section 4.1.6 of RFC 1212
applies."
INDEX { atmfNetPrefixPort, atmfNetPrefixPrefix }
::= { atmfNetPrefixTable 1 }
AtmfNetPrefixEntry ::=
SEQUENCE {
atmfNetPrefixPort
INTEGER,
atmfNetPrefixPrefix
NetPrefix,
atmfNetPrefixStatus
INTEGER
}
atmfNetPrefixPort OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value which identifies the UNI port for
which the network prefix for ATM addresses is in
effect. The value of 0 has the special meaning of
identifying the local UNI."
::= { atmfNetPrefixEntry 1 }
atmfNetPrefixPrefix OBJECT-TYPE
SYNTAX NetPrefix
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The network prefix for ATM addresses which is in
effect on the user side of the ATM UNI port."
::= { atmfNetPrefixEntry 2 }
atmfNetPrefixStatus OBJECT-TYPE
SYNTAX INTEGER { valid(1), invalid(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An indication of the validity of the network prefix
for ATM addresses on the user side of the UNI port.
To configure a new network prefix in this table, the
network-side IME must set the appropriate instance of this
object to the value valid(1). To delete an existing
network prefix in this table, the network-side IME must
set the appropriate instance of this object to the
value invalid(2).
If circumstances occur on the user-side IME which cause a
prefix to become invalid, the user-side IME modifies the
value of the appropriate instance of this object to invalid(2).
Whenever the value of this object for a particular
prefix becomes invalid(2), the conceptual row for that
prefix may be removed from the table at any time,
either immediately or subsequently."
::= { atmfNetPrefixEntry 3 }
-- The Address Group
--
-- The Address Table is implemented by the network-side IME.
atmfAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table implemented by the network-side IME, containing the
ATM-layer addresses in effect on the user side of the UNI."
::= { atmfAddressGroup 1 }
atmfAddressEntry OBJECT-TYPE
SYNTAX AtmfAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a single ATM-layer address in effect
on the user-side IME. Note that the index variable
atmAddressAtmAddress is a variable-length string, and as
such the rule for variable-length strings in section
4.1.6 of RFC 1212 applies."
INDEX { atmfAddressPort, atmfAddressAtmAddress }
::= { atmfAddressTable 1 }
AtmfAddressEntry ::=
SEQUENCE {
atmfAddressPort
INTEGER,
atmfAddressAtmAddress
AtmAddress,
atmfAddressStatus
INTEGER,
atmfAddressOrgScope
INTEGER
}
atmfAddressPort OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value which identifies the UNI port for
which the ATM address is in effect. The value of 0
has the special meaning of identifying the local UNI."
::= { atmfAddressEntry 1 }
atmfAddressAtmAddress OBJECT-TYPE
SYNTAX AtmAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ATM address which is in effect on the user side
of the ATM UNI port."
::= { atmfAddressEntry 2 }
atmfAddressStatus OBJECT-TYPE
SYNTAX INTEGER { valid(1), invalid(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An indication of the validity of the ATM address at
the user side of the UNI port. To configure a new
address in this table, the user-side IME must set the
appropriate instance of this object to the value
valid(1). To delete an existing address in this table,
the user-side IME must set the appropriate instance of
this object to the value invalid(2).
If circumstances occur on the network-side IME which cause
an address to become invalid, the network-side IME
modifies the value of the appropriate instance of this
object to invalid(2).
Whenever the value of this object for a particular
address becomes invalid(2), the conceptual row for
that address may be removed from the table at any
time, either immediately or subsequently."
::= { atmfAddressEntry 3 }
atmfAddressOrgScope OBJECT-TYPE
SYNTAX INTEGER {
localNetwork(1),
localNetworkPlusOne(2),
localNetworkPlusTwo(3),
siteMinusOne(4),
intraSite(5),
sitePlusOne(6),
organizationMinusOne(7),
intraOrganization(8),
organizationPlusOne(9),
communityMinusOne(10),
intraCommunity(11),
communityPlusOne(12),
regional(13),
interRegional(14),
global(15)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates the organizational
scope for the referenced address. The information of
the referenced address shall not be distributed
outside the indicated scope. If the user-side IME does
not specify a value for the atmfAddressOrgScope object,
the network shall set the value of this object to
localNetwork(1), if the registered address is an ATM group
address, or to global(15), if the registered address is
an individual address. Refer to Annex 6.0
of ATM Forum UNI Signalling 4.0 for guidelines regarding
the use of organizational scopes.
This organization hierarchy may be mapped to ATM network's
routing hierarchy such as PNNI's routing level and
the mapping shall be configurable in
nodes. Use of this object in a public network is for
further study.
The default values for organizational scope are
localNetwork(1) for ATM group addresses, and global(15)
for individual addresses."
::= { atmfAddressEntry 4 }
-- The Address Registration Admin Group
--
-- The Address Registration Admin Table is mandatory for all IMEs.
atmfAddressRegistrationAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfAddressRegistrationAdminEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Address Registration administrative
information for the ATM Interface."
::= { atmfAddressRegistrationAdminGroup 1 }
atmfAddressRegistrationAdminEntry OBJECT-TYPE
SYNTAX AtmfAddressRegistrationAdminEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the table, containing Address
Registration administrative information for the ATM
Interface."
INDEX { atmfAddressRegistrationAdminIndex }
::= { atmfAddressRegistrationAdminTable 1 }
AtmfAddressRegistrationAdminEntry ::=
SEQUENCE {
atmfAddressRegistrationAdminIndex
INTEGER,
atmfAddressRegistrationAdminStatus
INTEGER
}
atmfAddressRegistrationAdminIndex OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of 0 which has the special meaning of
identifying the ATM Interface over which this message
was received."
::= { atmfAddressRegistrationAdminEntry 1 }
atmfAddressRegistrationAdminStatus OBJECT-TYPE
SYNTAX INTEGER { supported(1), unsupported(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An indication of whether or not Address Registration
is supported on this ATM Interface. Supported(1)
indicates that this ATM Interface supports address
registration. Unsupported(2) indicates that this ATM
Interface does not support address registration."
::= { atmfAddressRegistrationAdminEntry 2 }
END

1666
snmp_mib_archive/ATM-FORUM-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

188
snmp_mib_archive/ATM-FORUM-TC-MIB.my 2
View File

@ -1,188 +0,0 @@
-- --------------------------------------------------------------------
-- ATM FORUM TC MIB
--
-- October 1996, Kartik Chandrasekhar
--
-- Copyright (c) 1996-1997 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
ATM-FORUM-TC-MIB DEFINITIONS ::= BEGIN
IMPORTS
TEXTUAL-CONVENTION FROM SNMPv2-TC
enterprises FROM RFC1155-SMI;
-- Textual Conventions
-- Boolean values use this data type from RFC-1903, "Textual Conventions
-- for Version 2 of the Simple Network Management Protocol (SNMPv2)"
TruthValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Boolean values use this data type from RFC-1903"
SYNTAX INTEGER {
true(1),
false(2)
}
-- CLNP address values use this data type from RFC-1238, "CLNS MIB for
-- use with Connectionless Network Protocol (ISO 8473) and End System
-- to Intermediate System (ISO 9542)"
ClnpAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"CLNP address values use this data type from RFC-1238"
SYNTAX OCTET STRING (SIZE (1..21))
-- ATM Service Categories use this data type (See [TM4.0]):
AtmServiceCategory ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ATM Service Categories use this data type"
SYNTAX INTEGER {
other(1),
cbr(2),
rtVbr(3),
nrtVbr(4),
abr(5),
ubr(6)
}
-- ATM End-System Addresses use this data type:
AtmAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ATM End-System Addresses"
SYNTAX OCTET STRING (SIZE (8 | 20))
-- Network-Prefixes for an ATM Address use this data type:
NetPrefix ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ATM End-System Addresses"
SYNTAX OCTET STRING (SIZE (8 | 13))
-- In both the AtmAddress and NetPrefix conventions, Native E.164 addresses
-- are represented as 8 octets using the format specified in section
-- 3.1.1.3 of the ATM Forum UNI Signalling 4.0 specification.
-- In contrast, an NSAP-encoded address is 20 octets, and an NSAP-encoded
-- network prefix is 13 octets long.
-- MIB Groups
-- a subtree for defining ATM Forum MIB object types
atmForum OBJECT IDENTIFIER ::= { enterprises 353 }
-- a subtree for defining administrative object types
atmForumAdmin OBJECT IDENTIFIER ::= { atmForum 1 }
atmfTransmissionTypes OBJECT IDENTIFIER ::= { atmForumAdmin 2 }
atmfMediaTypes OBJECT IDENTIFIER ::= { atmForumAdmin 3 }
atmfTrafficDescrTypes OBJECT IDENTIFIER ::= { atmForumAdmin 4 }
atmfSrvcRegTypes OBJECT IDENTIFIER ::= { atmForumAdmin 5 }
-- a subtree for defining ATM Interface MIB object types
atmForumUni OBJECT IDENTIFIER ::= { atmForum 2 }
atmfPhysicalGroup OBJECT IDENTIFIER ::= { atmForumUni 1 }
atmfAtmLayerGroup OBJECT IDENTIFIER ::= { atmForumUni 2 }
atmfAtmStatsGroup OBJECT IDENTIFIER ::= { atmForumUni 3 }
atmfVpcGroup OBJECT IDENTIFIER ::= { atmForumUni 4 }
atmfVccGroup OBJECT IDENTIFIER ::= { atmForumUni 5 }
atmfAddressGroup OBJECT IDENTIFIER ::= { atmForumUni 6 }
atmfNetPrefixGroup OBJECT IDENTIFIER ::= { atmForumUni 7 }
atmfSrvcRegistryGroup OBJECT IDENTIFIER ::= { atmForumUni 8 }
atmfVpcAbrGroup OBJECT IDENTIFIER ::= { atmForumUni 9 }
atmfVccAbrGroup OBJECT IDENTIFIER ::= { atmForumUni 10 }
atmfAddressRegistrationAdminGroup OBJECT IDENTIFIER ::= { atmForumUni 11 }
-- Object Identifier definitions
-- Transmission Types: These values are no longer used
atmfUnknownType OBJECT IDENTIFIER ::= { atmfTransmissionTypes 1}
atmfSonetSTS3c OBJECT IDENTIFIER ::= { atmfTransmissionTypes 2 }
atmfDs3 OBJECT IDENTIFIER ::= { atmfTransmissionTypes 3 }
atmf4B5B OBJECT IDENTIFIER ::= { atmfTransmissionTypes 4 }
atmf8B10B OBJECT IDENTIFIER ::= { atmfTransmissionTypes 5 }
atmfSonetSTS12c OBJECT IDENTIFIER ::= { atmfTransmissionTypes 6 }
atmfE3 OBJECT IDENTIFIER ::= { atmfTransmissionTypes 7 }
atmfT1 OBJECT IDENTIFIER ::= { atmfTransmissionTypes 8 }
atmfE1 OBJECT IDENTIFIER ::= { atmfTransmissionTypes 9 }
-- Media Types: These values are no longer used
atmfMediaUnknownType OBJECT IDENTIFIER ::= { atmfMediaTypes 1 }
atmfMediaCoaxCable OBJECT IDENTIFIER ::= { atmfMediaTypes 2 }
atmfMediaSingleMode OBJECT IDENTIFIER ::= { atmfMediaTypes 3 }
atmfMediaMultiMode OBJECT IDENTIFIER ::= { atmfMediaTypes 4 }
atmfMediaStp OBJECT IDENTIFIER ::= { atmfMediaTypes 5 }
atmfMediaUtp OBJECT IDENTIFIER ::= { atmfMediaTypes 6 }
-- Traffic Descriptor Types: These types are combined with a five element
-- parameter vector to describe a Traffic Descriptor.
-- Traffic Descriptors along with a Best Effort Indicator are used to
-- indicate a Conformance Definition as defined in [TM4.0].
-- These types are no longer used
atmfNoDescriptor OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 1 }
atmfPeakRate OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 2 }
-- The No CLP/No SCR Type
-- Indicates the CBR.1 Conformance Definition if Best Effort is No
-- Indicates the UBR.1 and UBR.2 Conformance Definitions if Best Effort is Yes
atmfNoClpNoScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 3 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameter #2 - CDVT in tenths of microseconds
-- Parameters #3, #4 and #5 are unused
-- These types are no longer used
atmfClpNoTaggingNoScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 4 }
atmfClpTaggingNoScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 5 }
-- The SCR/No CLP Type
-- Indicates the VBR.1 Conformance Definition
atmfNoClpScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 6 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameter #2 - sustainable cell rate in cells/second for CLP=0+1 traffic
-- Parameter #3 - maximum burst size in cells
-- Parameter #4 - CDVT in tenths of microseconds
-- Parameter #5 - unused
-- The CLP without Tagging/SCR Type
-- Indicates the VBR.2 Conformance Definition
atmfClpNoTaggingScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 7 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameter #2 - sustainable cell rate in cells/second for CLP=0 traffic
-- Parameter #3 - maximum burst size in cells
-- Parameter #4 - CDVT in tenths of microseconds
-- Parameter #5 - unused
-- The CLP with Tagging/SCR Type
-- Indicates the VBR.3 Conformance Definition
atmfClpTaggingScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 8 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameter #2 - sustainable cell rate in cells/second for CLP=0
-- traffic, excess tagged as CLP=1
-- Parameter #3 - maximum burst size in cells
-- Parameter #4 - CDVT in tenths of microseconds
-- Parameter #5 - unused
-- The ABR Type
-- Indicates the ABR Conformance Definition
atmfClpNoTaggingMcr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 9 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second
-- parameter #2 - CDVT in tenths of microseconds
-- Parameter #3 - minimum cell rate in cells/second
-- Parameter #4 - unused
-- Parameter #5 - unused
END

3029
snmp_mib_archive/ATM-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

2271
snmp_mib_archive/ATM-RMON-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

1090
snmp_mib_archive/ATM-SOFT-PVC-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

724
snmp_mib_archive/ATM-TC-MIB.my 2
View File

@ -1,724 +0,0 @@
-- *****************************************************************
-- ATM TC MIB
--
-- October 2002, Srikar B S
--
-- Copyright (c) 2002 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
-- This mib is extracted from RFC 2514
ATM-TC-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY,
TimeTicks, mib-2
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC;
atmTCMIB MODULE-IDENTITY
LAST-UPDATED "9810190200Z"
ORGANIZATION "IETF AToMMIB Working Group"
CONTACT-INFO
" Michael Noto
Postal: 3Com Corporation
5400 Bayfront Plaza, M/S 3109
Santa Clara, CA 95052
USA
Tel: +1 408 326 2218
E-mail: mike_noto@3com.com
Ethan Mickey Spiegel
Postal: Cisco Systems
170 W. Tasman Dr.
San Jose, CA 95134
USA
Tel: +1 408 526 6408
E-mail: mspiegel@cisco.com
Kaj Tesink
Postal: Bellcore
331 Newman Springs Road
Red Bank, NJ 07701
USA
Tel: +1 732 758 5254
Fax: +1 732 758 4177
E-mail: kaj@bellcore.com"
DESCRIPTION
"This MIB Module provides Textual Conventions
and OBJECT-IDENTITY Objects to be used by
ATM systems."
::= { mib-2 37 3 } -- atmMIB 3 (see [3])
-- The Textual Conventions defined below are organized
-- alphabetically
AtmAddr ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x"
STATUS current
DESCRIPTION
"An ATM address. The semantics are implied by
the length. The address types are: - no
address (0 octets) - E.164 (8 octets) - NSAP
(20 octets) In addition, when subaddresses
are used the AtmAddr may represent the
concatenation of address and subaddress. The
associated address types are: - E.164, E.164
(16 octets) - E.164, NSAP (28 octets) - NSAP,
NSAP (40 octets) Address lengths other than
defined in this definition imply address
types defined elsewhere. Note: The E.164
address is encoded in BCD format."
SYNTAX OCTET STRING (SIZE(0..40))
AtmConnCastType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The type of topology of a connection (point-
to-point, point-to-multipoint). In the case
of point-to-multipoint, the orientation of
this VPL or VCL in the connection.
On a host:
- p2mpRoot indicates that the host
is the root of the p2mp connection.
- p2mpLeaf indicates that the host
is a leaf of the p2mp connection.
On a switch interface:
- p2mpRoot indicates that cells received
by the switching fabric from the interface
are from the root of the p2mp connection.
- p2mpLeaf indicates that cells transmitted
to the interface from the switching fabric
are to the leaf of the p2mp connection."
SYNTAX INTEGER {
p2p(1),
p2mpRoot(2),
p2mpLeaf(3)
}
AtmConnKind ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The type of call control used for an ATM
connection at a particular interface. The use
is as follows:
pvc(1)
Virtual link of a PVC. Should not be
used for an PVC/SVC (i.e., Soft PVC)
crossconnect.
svcIncoming(2)
Virtual link established after a
received signaling request to setup
an SVC.
svcOutgoing(3)
Virtual link established after a
transmitted or forwarded signaling
request to setup an SVC.
spvcInitiator(4)
Virtual link at the PVC side of an
SVC/PVC crossconnect, where the
switch is the initiator of the Soft PVC
setup.
spvcTarget(5)
Virtual link at the PVC side of an
SVC/PVC crossconnect, where the
switch is the target of the Soft PVC
setup.
For PVCs, a pvc virtual link is always cross-
connected to a pvc virtual link.
For SVCs, an svcIncoming virtual link is always cross-
connected to an svcOutgoing virtual link.
For Soft PVCs, an spvcInitiator is either cross-connected to
an svcOutgoing or an spvcTarget, and an spvcTarget is either
cross-connected to an svcIncoming or an spvcInitiator."
SYNTAX INTEGER {
pvc(1),
svcIncoming(2),
svcOutgoing(3),
spvcInitiator(4),
spvcTarget(5)
}
AtmIlmiNetworkPrefix ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A network prefix used for ILMI address
registration. In the case of ATM endsystem
addresses (AESAs), the network prefix is the first
13 octets of the address which includes the AFI,
IDI, and HO-DSP fields. In the case of native
E.164 addresses, the network prefix is the entire
E.164 address encoded in 8 octets, as if it were
an E.164 IDP in an ATM endsystem address
structure."
REFERENCE
"ATM Forum, Integrated Local Management Interface
(ILMI) Specification, Version 4.0,
af-ilmi-0065.000, September 1996, Section 9
ATM Forum, ATM User-Network Interface Signalling
Specification, Version 4.0 (UNI 4.0),
af-sig-0061.000, June 1996, Section 3"
SYNTAX OCTET STRING (SIZE(8|13))
AtmInterfaceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The connection setup procedures used for the
identified interface.
Other: Connection setup procedures other than
those listed below.
Auto-configuration:
Indicates that the connection setup
procedures are to be determined dynamically,
or that determination has not yet been
completed. One such mechanism is via ATM
Forum ILMI auto-configuration procedures.
ITU-T DSS2:
- ITU-T Recommendation Q.2931, Broadband
Integrated Service Digital Network (B-ISDN)
Digital Subscriber Signalling System No.2
(DSS2) User-Network Interface (UNI) Layer 3
Specification for Basic Call/Connection
Control (September 1994)
- ITU-T Draft Recommendation Q.2961,
B-ISDN DSS 2 Support of Additional Traffic
Parameters (May 1995)
- ITU-T Draft Recommendation Q.2971,
B-ISDN DSS 2 User Network Interface Layer 3
Specification for Point-to-multipoint
Call/connection Control (May 1995)
ATM Forum UNI 3.0:
ATM Forum, ATM User-Network Interface,
Version 3.0 (UNI 3.0) Specification,
(1994).
ATM Forum UNI 3.1:
ATM Forum, ATM User-Network Interface,
Version 3.1 (UNI 3.1) Specification,
(November 1994).
ATM Forum UNI Signalling 4.0:
ATM Forum, ATM User-Network Interface (UNI)
Signalling Specification Version 4.0,
af-sig-0061.000 (June 1996).
ATM Forum IISP (based on UNI 3.0 or UNI 3.1) :
Interim Inter-switch Signaling Protocol
(IISP) Specification, Version 1.0,
af-pnni-0026.000, (December 1994).
ATM Forum PNNI 1.0 :
ATM Forum, Private Network-Network Interface
Specification, Version 1.0, af-pnni-0055.000,
(March 1996).
ATM Forum B-ICI:
ATM Forum, B-ICI Specification, Version 2.0,
af-bici-0013.002, (November 1995).
ATM Forum UNI PVC Only:
An ATM Forum compliant UNI with the
signalling disabled.
ATM Forum NNI PVC Only:
An ATM Forum compliant NNI with the
signalling disabled."
SYNTAX INTEGER {
other(1),
autoConfig(2),
ituDss2(3),
atmfUni3Dot0(4),
atmfUni3Dot1(5),
atmfUni4Dot0(6),
atmfIispUni3Dot0(7),
atmfIispUni3Dot1(8),
atmfIispUni4Dot0(9),
atmfPnni1Dot0(10),
atmfBici2Dot0(11),
atmfUniPvcOnly(12),
atmfNniPvcOnly(13) }
AtmServiceCategory ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The service category for a connection."
REFERENCE
"ATM Forum Traffic Management Specification,
Version 4.0, af-tm-0056.000, June 1996."
SYNTAX INTEGER {
other(1), -- none of the following
cbr(2), -- constant bit rate
rtVbr(3), -- real-time variable bit rate
nrtVbr(4), -- non real-time variable bit rate
abr(5), -- available bit rate
ubr(6) -- unspecified bit rate
}
AtmSigDescrParamIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value of this object identifies a row in the
atmSigDescrParamTable. The value 0 signifies that
none of the signalling parameters defined in the
atmSigDescrParamTable are applicable."
SYNTAX INTEGER (0..2147483647)
AtmTrafficDescrParamIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value of this object identifies a row in the
atmTrafficDescrParamTable. The value 0 signifies
that no row has been identified."
SYNTAX INTEGER (0..2147483647)
AtmVcIdentifier ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The VCI value for a VCL. The maximum VCI value
cannot exceed the value allowable by
atmInterfaceMaxVciBits defined in ATM-MIB."
SYNTAX INTEGER (0..65535)
AtmVpIdentifier ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The VPI value for a VPL or VCL. The value VPI=0
is only allowed for a VCL. For ATM UNIs supporting
VPCs the VPI value ranges from 0 to 255. The VPI
value 0 is supported for ATM UNIs conforming to
the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs)
specification. For ATM UNIs supporting VCCs the
VPI value ranges from 0 to 255. For ATM NNIs the
VPI value ranges from 0 to 4095. The maximum VPI
value cannot exceed the value allowable by
atmInterfaceMaxVpiBits defined in ATM-MIB."
SYNTAX INTEGER (0..4095)
AtmVorXAdminStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value determines the desired administrative
status of a virtual link or cross-connect. The up
and down states indicate that the traffic flow is
enabled or disabled respectively on the virtual
link or cross-connect."
SYNTAX INTEGER {
up(1),
down(2)
}
AtmVorXLastChange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value of MIB II's sysUpTime at the time a
virtual link or cross-connect entered its current
operational state. If the current state was
entered prior to the last re-initialization of the
agent then this object contains a zero value."
SYNTAX TimeTicks
AtmVorXOperStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value determines the operational status of a
virtual link or cross-connect. The up and down
states indicate that the traffic flow is enabled
or disabled respectively on the virtual link or
cross-connect. The unknown state indicates that
the state of it cannot be determined. The state
will be down or unknown if the supporting ATM
interface(s) is down or unknown respectively."
SYNTAX INTEGER {
up(1),
down(2),
unknown(3)
}
-- OBJECT-IDENTITIES:
-- The following atmTrafficDescriptorTypes has been moved
-- from RFC1695 and no longer appear in the revision of
-- RFC1695[3].
atmTrafficDescriptorTypes OBJECT IDENTIFIER ::= {mib-2 37 1 1}
-- atmMIBObjects
-- See [3].
-- All other and new OBJECT IDENTITIES
-- are defined under the following subtree:
atmObjectIdentities OBJECT IDENTIFIER ::= {atmTCMIB 1}
-- The following values are defined for use as
-- possible values of the ATM traffic descriptor type.
atmNoTrafficDescriptor OBJECT-IDENTITY
STATUS deprecated
DESCRIPTION
"This identifies the no ATM traffic
descriptor type. Parameters 1, 2, 3, 4,
and 5 are not used. This traffic descriptor
type can be used for best effort traffic."
::= {atmTrafficDescriptorTypes 1}
atmNoClpNoScr OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This traffic descriptor type is for no CLP
and no Sustained Cell Rate. The use of the
parameter vector for this type:
Parameter 1: peak cell rate in cells/second
for CLP=0+1 traffic
Parameter 2: not used
Parameter 3: not used
Parameter 4: not used
Parameter 5: not used."
REFERENCE
"ATM Forum,ATM User-Network Interface,
Version 3.0 (UNI 3.0) Specification, 1994.
ATM Forum, ATM User-Network Interface,
Version 3.1 (UNI 3.1) Specification,
November 1994."
::= {atmTrafficDescriptorTypes 2}
atmClpNoTaggingNoScr OBJECT-IDENTITY
STATUS deprecated
DESCRIPTION
"This traffic descriptor is for CLP without
tagging and no Sustained Cell Rate. The use
of the parameter vector for this type:
Parameter 1: peak cell rate in cells/second
for CLP=0+1 traffic
Parameter 2: peak cell rate in cells/second
for CLP=0 traffic
Parameter 3: not used
Parameter 4: not used
Parameter 5: not used."
::= {atmTrafficDescriptorTypes 3}
atmClpTaggingNoScr OBJECT-IDENTITY
STATUS deprecated
DESCRIPTION
"This traffic descriptor is for CLP with
tagging and no Sustained Cell Rate. The use
of the parameter vector for this type:
Parameter 1: peak cell rate in cells/second
for CLP=0+1 traffic
Parameter 2: peak cell rate in cells/second
for CLP=0 traffic, excess
tagged as CLP=1
Parameter 3: not used
Parameter 4: not used
Parameter 5: not used."
::= {atmTrafficDescriptorTypes 4}
atmNoClpScr OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This traffic descriptor type is for no CLP
with Sustained Cell Rate. The use of the
parameter vector for this type:
Parameter 1: peak cell rate in cells/second
for CLP=0+1 traffic
Parameter 2: sustainable cell rate in cells/second
for CLP=0+1 traffic
Parameter 3: maximum burst size in cells
Parameter 4: not used
Parameter 5: not used."
REFERENCE
"ATM Forum,ATM User-Network Interface,
Version 3.0 (UNI 3.0) Specification, 1994.
ATM Forum, ATM User-Network Interface,
Version 3.1 (UNI 3.1) Specification,
November 1994."
::= {atmTrafficDescriptorTypes 5}
atmClpNoTaggingScr OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This traffic descriptor type is for CLP with
Sustained Cell Rate and no tagging. The use
of the parameter vector for this type:
Parameter 1: peak cell rate in cells/second
for CLP=0+1 traffic
Parameter 2: sustainable cell rate in cells/second
for CLP=0 traffic
Parameter 3: maximum burst size in cells
Parameter 4: not used
Parameter 5: not used."
REFERENCE
"ATM Forum,ATM User-Network Interface,
Version 3.0 (UNI 3.0) Specification, 1994.
ATM Forum, ATM User-Network Interface,
Version 3.1 (UNI 3.1) Specification,
November 1994."
::= {atmTrafficDescriptorTypes 6}
atmClpTaggingScr OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This traffic descriptor type is for CLP with
tagging and Sustained Cell Rate. The use of
the parameter vector for this type:
Parameter 1: peak cell rate in cells/second
for CLP=0+1 traffic
Parameter 2: sustainable cell rate in cells/second
for CLP=0 traffic, excess tagged as
CLP=1
Parameter 3: maximum burst size in cells
Parameter 4: not used
Parameter 5: not used."
REFERENCE
"ATM Forum,ATM User-Network Interface,
Version 3.0 (UNI 3.0) Specification, 1994.
ATM Forum, ATM User-Network Interface,
Version 3.1 (UNI 3.1) Specification,
November 1994."
::= {atmTrafficDescriptorTypes 7}
atmClpNoTaggingMcr OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This traffic descriptor type is for CLP with
Minimum Cell Rate and no tagging. The use of
the parameter vector for this type:
Parameter 1: peak cell rate in cells/second
for CLP=0+1 traffic
Parameter 2: CDVT in tenths of microseconds
Parameter 3: minimum cell rate in cells/second
Parameter 4: unused
Parameter 5: unused."
REFERENCE
"ATM Forum,ATM User-Network Interface,
Version 3.0 (UNI 3.0) Specification, 1994.
ATM Forum, ATM User-Network Interface,
Version 3.1 (UNI 3.1) Specification,
November 1994."
::= {atmTrafficDescriptorTypes 8}
atmClpTransparentNoScr OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This traffic descriptor type is for the CLP-
transparent model and no Sustained Cell Rate.
The use of the parameter vector for this type:
Parameter 1: peak cell rate in cells/second
for CLP=0+1 traffic
Parameter 2: CDVT in tenths of microseconds
Parameter 3: not used
Parameter 4: not used
Parameter 5: not used.
This traffic descriptor type is applicable to
connections following the CBR.1 conformance
definition.
Connections specifying this traffic descriptor
type will be rejected at UNI 3.0 or UNI 3.1
interfaces. For a similar traffic descriptor
type that can be accepted at UNI 3.0 and
UNI 3.1 interfaces, see atmNoClpNoScr."
REFERENCE
"ATM Forum,ATM User-Network Interface,
Version 3.0 (UNI 3.0) Specification, 1994.
ATM Forum, ATM User-Network Interface,
Version 3.1 (UNI 3.1) Specification,
November 1994.
ATM Forum, Traffic Management Specification,
Version 4.0, af-tm-0056.000, June 1996."
::= {atmTrafficDescriptorTypes 9}
atmClpTransparentScr OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This traffic descriptor type is for the CLP-
transparent model with Sustained Cell Rate.
The use of the parameter vector for this type:
Parameter 1: peak cell rate in cells/second
for CLP=0+1 traffic
Parameter 2: sustainable cell rate in cells/second
for CLP=0+1 traffic
Parameter 3: maximum burst size in cells
Parameter 4: CDVT in tenths of microseconds
Parameter 5: not used.
This traffic descriptor type is applicable to
connections following the VBR.1 conformance
definition.
Connections specifying this traffic descriptor
type will be rejected at UNI 3.0 or UNI 3.1
interfaces. For a similar traffic descriptor
type that can be accepted at UNI 3.0 and
UNI 3.1 interfaces, see atmNoClpScr."
REFERENCE
"ATM Forum,ATM User-Network Interface,
Version 3.0 (UNI 3.0) Specification, 1994.
ATM Forum, ATM User-Network Interface,
Version 3.1 (UNI 3.1) Specification,
November 1994.
ATM Forum, Traffic Management Specification,
Version 4.0, af-tm-0056.000, June 1996."
::= {atmTrafficDescriptorTypes 10}
atmNoClpTaggingNoScr OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This traffic descriptor type is for no CLP
with tagging and no Sustained Cell Rate. The
use of the parameter vector for this type:
Parameter 1: peak cell rate in cells/second
for CLP=0+1 traffic
Parameter 2: CDVT in tenths of microseconds
Parameter 3: not used
Parameter 4: not used
Parameter 5: not used.
This traffic descriptor type is applicable to
connections following the UBR.2 conformance
definition ."
REFERENCE
"ATM Forum,ATM User-Network Interface,
Version 3.0 (UNI 3.0) Specification, 1994.
ATM Forum, ATM User-Network Interface,
Version 3.1 (UNI 3.1) Specification,
November 1994.
ATM Forum, Traffic Management Specification,
Version 4.0, af-tm-0056.000, June 1996."
::= {atmTrafficDescriptorTypes 11}
atmNoClpNoScrCdvt OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This traffic descriptor type is for no CLP
and no Sustained Cell Rate. The use of the
parameter vector for this type:
Parameter 1: peak cell rate in cells/second
for CLP=0+1 traffic
Parameter 2: CDVT in tenths of microseconds
Parameter 3: not used
Parameter 4: not used
Parameter 5: not used.
This traffic descriptor type is applicable to
CBR connections following the UNI 3.0/3.1
conformance definition for PCR CLP=0+1.
These CBR connections differ from CBR.1
connections in that the CLR objective
applies only to the CLP=0 cell flow.
This traffic descriptor type is also
applicable to connections following the UBR.1
conformance definition."
REFERENCE
"ATM Forum,ATM User-Network Interface,
Version 3.0 (UNI 3.0) Specification, 1994.
ATM Forum, ATM User-Network Interface,
Version 3.1 (UNI 3.1) Specification,
November 1994.
ATM Forum, Traffic Management Specification,
Version 4.0, af-tm-0056.000, June 1996."
::= {atmTrafficDescriptorTypes 12}
atmNoClpScrCdvt OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This traffic descriptor type is for no CLP
with Sustained Cell Rate. The use of the
parameter vector for this type:
Parameter 1: peak cell rate in cells/second
for CLP=0+1 traffic
Parameter 2: sustainable cell rate in cells/second
for CLP=0+1 traffic
Parameter 3: maximum burst size in cells
Parameter 4: CDVT in tenths of microseconds
Parameter 5: not used.
This traffic descriptor type is applicable
to VBR connections following the UNI 3.0/3.1
conformance definition for PCR CLP=0+1 and
SCR CLP=0+1. These VBR connections
differ from VBR.1 connections in that
the CLR objective applies only to the CLP=0
cell flow."
REFERENCE
"ATM Forum,ATM User-Network Interface,
Version 3.0 (UNI 3.0) Specification, 1994.
ATM Forum, ATM User-Network Interface,
Version 3.1 (UNI 3.1) Specification,
November 1994.
ATM Forum, Traffic Management Specification,
Version 4.0, af-tm-0056.000, June 1996."
::= {atmTrafficDescriptorTypes 13}
atmClpNoTaggingScrCdvt OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This traffic descriptor type is for CLP with
Sustained Cell Rate and no tagging. The use
of the parameter vector for this type:
Parameter 1: peak cell rate in cells/second
for CLP=0+1 traffic
Parameter 2: sustainable cell rate in cells/second
for CLP=0 traffic
Parameter 3: maximum burst size in cells
Parameter 4: CDVT in tenths of microseconds
Parameter 5: not used.
This traffic descriptor type is applicable to
connections following the VBR.2 conformance
definition."
REFERENCE
"ATM Forum,ATM User-Network Interface,
Version 3.0 (UNI 3.0) Specification, 1994.
ATM Forum, ATM User-Network Interface,
Version 3.1 (UNI 3.1) Specification,
November 1994.
ATM Forum, Traffic Management Specification,
Version 4.0, af-tm-0056.000, June 1996."
::= {atmTrafficDescriptorTypes 14}
atmClpTaggingScrCdvt OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This traffic descriptor type is for CLP with
tagging and Sustained Cell Rate. The use of
the parameter vector for this type:
Parameter 1: peak cell rate in cells/second
for CLP=0+1 traffic
Parameter 2: sustainable cell rate in cells/second
for CLP=0 traffic, excess tagged as
CLP=1
Parameter 3: maximum burst size in cells
Parameter 4: CDVT in tenths of microseconds
Parameter 5: not used.
This traffic descriptor type is applicable to
connections following the VBR.3 conformance
definition."
REFERENCE
"ATM Forum,ATM User-Network Interface,
Version 3.0 (UNI 3.0) Specification, 1994.
ATM Forum, ATM User-Network Interface,
Version 3.1 (UNI 3.1) Specification,
November 1994.
ATM Forum, Traffic Management Specification,
Version 4.0, af-tm-0056.000, June 1996."
::= {atmTrafficDescriptorTypes 15}
END

3312
snmp_mib_archive/ATM2-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

440
snmp_mib_archive/AWC-VLAN-CFG-MIB.my 2
View File

@ -1,440 +0,0 @@
-- *****************************************************************
-- AWC-VLAN-MIB.my: Cisco Aironet Wireless LAN VLAN Configuration
-- MIB file
--
-- September 2002, Victor Griswold
--
-- Copyright (c) 2002 by Cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
AWC-VLAN-CFG-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
RowStatus,
TruthValue
FROM SNMPv2-TC
awcVx,
AwcVlanId,
AwcPolId,
WEPKeytype128,
AwcDot11MicAlgorithm,
AwcDot11WEPKeyPermuteAlgorithm,
AwcPfPriority
FROM AWCVX-MIB;
awcVlanCfgMIB MODULE-IDENTITY
LAST-UPDATED "200209060000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-aironet@cisco.com"
DESCRIPTION
"Aironet products VLAN Configuration MIB."
REVISION "200107110000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { awcVx 21 }
awcVlanCfgObjects OBJECT IDENTIFIER ::= { awcVlanCfgMIB 1 }
-- Textual Conventions
AwcVlanIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value used to index per-VLAN tables.
Represents an IEEE 802.1Q VLAN-ID with global scope
within a given bridged domain (see AwcVlanId
textual convention). The value 4095 indicates
that the conceptual row applies to non-VLAN-tagged
frames (though it would be more directly
representative of the packet format, 0 can not be
used for this purpose, per SNMP conventions)."
SYNTAX Unsigned32 (1..4095)
AwcVlanEncapType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The 802.1Q encapsulation mode. Valid values are:
dot1qDisabled (1), Disabled
dot1qPriority (2) 802.1Q Priority Tagging
dot1qHybrid (3), 802.1Q VLAN Hybrid Trunk
dot1qTrunk (4) 802.1Q VLAN Trunk
The default value is normally Disabled."
SYNTAX INTEGER {
dot1qDisabled(1),
dot1qPriority(2),
dot1qHybrid(3),
dot1qTrunk(4)
}
-- Object Type Definitions
awcMaxVlanIds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum number of discrete VLAN IDs supported.
The VLAN IDs need not be consecutive."
::= { awcVlanCfgObjects 1 }
awcVlanEncapMode OBJECT-TYPE
SYNTAX AwcVlanEncapType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encapsulation mode setting controls transmit
tagging logic for all ports. The value of this
object is derived from other settings within the
VLAN MIB."
DEFVAL { dot1qDisabled }
::= { awcVlanCfgObjects 2 }
awcNativeVlanId OBJECT-TYPE
SYNTAX AwcVlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Native VLAN ID for the device. The default Native
VLAN ID is 0, for no VLAN ID. If the device is attached
to an Ethernet bridge/switch VLAN port then a non-zero
Native VLAN ID must match the Port VLAN ID of the
bridge/switch port. The Native VLAN ID is the default
VLAN ID for frames that are not otherwise
associated with a VLAN ID."
DEFVAL { 0 }
::= { awcVlanCfgObjects 3 }
awcVlanAllowEncrypted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this attribute is true, the STA shall
indicate at the MAC service interface received
MSDUs regardless of the setting of the WEP
subfield of the Frame Control field, so long
as no other VLAN parameters necessitate use
of encryption. The default value of this attribute
shall be true.
The general use for awcVlanAllowEncrypted to be
true even when no static WEP keys are set for
a VLAN is to allow a station to utilize EAP
authentication to encrypt directed packets,
even while multicast packets are unencrypted."
DEFVAL { true }
::= { awcVlanCfgObjects 4 }
awcVlanAnyEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this attribute is true, VLAN operation of the
system is enabled when any awcVlanEnabled value is
true. When this attribute is false, VLAN operation
is disabled. The awcVlanAnyEnabled thus acts as a
master switch to enable or disable VLAN operation."
DEFVAL { false }
::= { awcVlanCfgObjects 5 }
-- VLAN Configuration Table
awcVlanCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AwcVlanCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table used for configuring and managing VLANS."
::= { awcVlanCfgObjects 6 }
awcVlanCfgEntry OBJECT-TYPE
SYNTAX AwcVlanCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VLAN table entry containing parameters for configuring
and managing a particular VLAN."
INDEX {awcVlanIndex}
::= { awcVlanCfgTable 1 }
AwcVlanCfgEntry ::= SEQUENCE {
awcVlanIndex AwcVlanIndex,
awcVlanPolId AwcPolId,
awcVlanEnabled TruthValue,
awcVlanNUcastKeyRotationInterval INTEGER,
awcVlanRowStatus RowStatus,
awcVlanMicAlgorithm AwcDot11MicAlgorithm,
awcVlanWEPKeyPermuteAlgorithm AwcDot11WEPKeyPermuteAlgorithm,
awcVlanName OCTET STRING,
awcVlanDefaultUserPriority AwcPfPriority,
awcVlanAlert TruthValue
}
awcVlanIndex OBJECT-TYPE
SYNTAX AwcVlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VLAN ID to which the parameters in this conceptual
row shall be applied. If 4095, the parameters in
this conceptual row shall be applied to
non-VLAN-tagged frames."
::= { awcVlanCfgEntry 1 }
awcVlanPolId OBJECT-TYPE
SYNTAX AwcPolId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Default Policy Group Identifier for hosts occupying
this VLAN."
DEFVAL { 0 }
::= { awcVlanCfgEntry 2 }
awcVlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If true, this VLAN is enabled on all trunk and
hybrid ports. If false, this VLAN is disabled on
all ports."
DEFVAL { false }
::= { awcVlanCfgEntry 3 }
awcVlanNUcastKeyRotationInterval OBJECT-TYPE
SYNTAX INTEGER (0..10000000)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"WEP key rotation period. 0 indicates no key rotation."
DEFVAL { 0 }
::= { awcVlanCfgEntry 4 }
awcVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used for creating/deleting conceptual rows in this
table."
::= { awcVlanCfgEntry 5 }
awcVlanMicAlgorithm OBJECT-TYPE
SYNTAX AwcDot11MicAlgorithm
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Auxiliary Message Integrity Check (MIC) calculated on
WEP-encoded packets of stations assigned to this VLAN.
This object is not applicable for the reserved VLAN
4095."
DEFVAL { micNone }
::= { awcVlanCfgEntry 6 }
awcVlanWEPKeyPermuteAlgorithm OBJECT-TYPE
SYNTAX AwcDot11WEPKeyPermuteAlgorithm
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Function through which the WEP encryption key is
permuted between key renewal periods for stations
assigned to this VLAN. This object is not
applicable for the reserved VLAN 4095."
DEFVAL { wepPermuteNone }
::= { awcVlanCfgEntry 7 }
awcVlanName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Descriptive textual name for the VLAN."
DEFVAL { "" }
::= { awcVlanCfgEntry 8 }
awcVlanDefaultUserPriority OBJECT-TYPE
SYNTAX AwcPfPriority
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Designation of the priority assigned to packets
transmitted over this VLAN, if no other filter or
classification rule has yet assigned a priority."
DEFVAL { default }
::= { awcVlanCfgEntry 9 }
awcVlanAlert OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Should an alert be registered when a packet on
this VLAN is observed?"
DEFVAL { false }
::= { awcVlanCfgEntry 10 }
-- Native VLAN Default Shared WEP Table
awcVlanNUcastKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF AwcVlanNUcastKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Default Shared WEP Keys for all 802.11 packets
transmitted and received as non-VLAN-tagged
frames over a port with the Port VLAN ID specified
as awcVlanIndex. If WEP encryption
is enabled for transmitted 802.11 frames, then the
set of 1 to 4 default shared WEP keys are used
to encrypt transmitted 802.11 broadcast/multicast
frames associated with the Port VLAN ID. The
shared WEP keys are also used to encrypt/decrypt
unicast frames, associated with the Port VLAN ID,
if an individual session key is not defined for the
target station address."
::= { awcVlanCfgObjects 7 }
awcVlanNUcastKeyEntry OBJECT-TYPE
SYNTAX AwcVlanNUcastKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the awcVlanNUcastKeyTable table."
INDEX {awcVlanIndex, awcVlanNUcastKeyIndex}
::= { awcVlanNUcastKeyTable 1 }
AwcVlanNUcastKeyEntry ::= SEQUENCE {
awcVlanNUcastKeyIndex INTEGER,
awcVlanNUcastKeyLen INTEGER,
awcVlanNUcastKeyValue WEPKeytype128
}
awcVlanNUcastKeyIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"802.11 WEP Key Index, + 1, used when transmitting or
receiving frames with this key."
::= { awcVlanNUcastKeyEntry 1 }
awcVlanNUcastKeyLen OBJECT-TYPE
SYNTAX INTEGER (0..13)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Length in octets of awcVlanNUcastKeyValue. Common
values are 5 for 40-bit WEP and 13 for 128-bit WEP.
A value of 0 means that the key is not set."
DEFVAL { 0 }
::= { awcVlanNUcastKeyEntry 2 }
awcVlanNUcastKeyValue OBJECT-TYPE
SYNTAX WEPKeytype128
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A WEP default secret key value. The value is
write-only (attempt to read will result in
return of zero-length string)."
::= { awcVlanNUcastKeyEntry 3 }
awcVlanAllowUnencryptedVlanId OBJECT-TYPE
SYNTAX AwcVlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Single VLAN ID on which unencrypted packets are
allowed. The default Unencrypted VLAN ID is 0,
meaning that all VLANs require full encryption."
DEFVAL { 0 }
::= { awcVlanCfgObjects 8 }
-- Notifications
awcVlanCfgNotifications OBJECT IDENTIFIER ::= { awcVlanCfgMIB 2 }
-- Conformance
awcVlanCfgConformance OBJECT IDENTIFIER ::= { awcVlanCfgMIB 3 }
awcVlanCfgCompliances OBJECT IDENTIFIER ::= { awcVlanCfgConformance 1 }
awcVlanCfgGroups OBJECT IDENTIFIER ::= { awcVlanCfgConformance 2 }
-- Compliance
awcVlanCfgCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the awcVlanCfgMIB group."
MODULE -- this module
MANDATORY-GROUPS {
awcVlanCfgObjectsGroup
}
::= { awcVlanCfgCompliances 1 }
-- Units of Conformance
awcVlanCfgObjectsGroup OBJECT-GROUP
OBJECTS {
awcMaxVlanIds,
awcVlanEncapMode,
awcNativeVlanId,
awcVlanAllowEncrypted,
awcVlanPolId,
awcVlanEnabled,
awcVlanNUcastKeyRotationInterval,
awcVlanRowStatus,
awcVlanMicAlgorithm,
awcVlanWEPKeyPermuteAlgorithm,
awcVlanName,
awcVlanDefaultUserPriority,
awcVlanAlert,
awcVlanNUcastKeyLen,
awcVlanNUcastKeyValue,
awcVlanAllowUnencryptedVlanId
}
STATUS current
DESCRIPTION
""
::= { awcVlanCfgGroups 1 }
END

1529
snmp_mib_archive/BASIS-GENERIC-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

139
snmp_mib_archive/BASIS-MIB.my 2
View File

@ -1,139 +0,0 @@
-- *****************************************************************
-- BASIS MIB
--
-- April 2003 Wei Gao
--
-- Copyright (c) 2003 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
BASIS-MIB DEFINITIONS ::= BEGIN
IMPORTS
stratacom,
ciscoWan
FROM CISCOWAN-SMI
MODULE-IDENTITY
FROM SNMPv2-SMI;
basisMIB MODULE-IDENTITY
LAST-UPDATED "200304040000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION "This MIB Contains OID subtrees used in
some of the MIBs under 'stratacom' enterprise.
"
REVISION "200304040000Z"
DESCRIPTION
"Initial version of this MIB Module.
The content of this MIB was originally available
in SMIv1 version. The MIB has been converted to
SMIv2 version and descriptions of some of the objects
have been modified."
::= { ciscoWan 67 }
basis OBJECT IDENTIFIER ::= { stratacom 110 }
par OBJECT IDENTIFIER ::= { stratacom 130 }
basisSystem OBJECT IDENTIFIER ::= { basis 1 }
cardGeneric OBJECT IDENTIFIER ::= { basis 2 }
cardSpecific OBJECT IDENTIFIER ::= { basis 3 }
basisLines OBJECT IDENTIFIER ::= { basis 4 }
basisServices OBJECT IDENTIFIER ::= { basis 5 }
axisDiagnostics OBJECT IDENTIFIER ::= { basis 6 }
basisShelf OBJECT IDENTIFIER ::= { basisSystem 1 }
basisAsm OBJECT IDENTIFIER ::= { basisSystem 2 }
axisRedundancy OBJECT IDENTIFIER ::= { basisSystem 3 }
axisSvc OBJECT IDENTIFIER ::= { basisSystem 4 }
atmLmiSignaling OBJECT IDENTIFIER ::= { cardSpecific 4 }
atmAddressRegistration OBJECT IDENTIFIER ::= { axisSvc 1 }
dsx1 OBJECT IDENTIFIER ::= { basisLines 3 }
dsx3 OBJECT IDENTIFIER ::= { basisLines 4 }
x21 OBJECT IDENTIFIER ::= { basisLines 5 }
sonet OBJECT IDENTIFIER ::= { basisLines 6 }
dsx0Vism OBJECT IDENTIFIER ::= { basisLines 7 }
dsx1Line OBJECT IDENTIFIER ::= { dsx1 1 }
dsx1Framing OBJECT IDENTIFIER ::= { dsx1 2 }
dsx1Plcp OBJECT IDENTIFIER ::= { dsx1 3 }
dsx3Line OBJECT IDENTIFIER ::= { dsx3 1 }
dsx3Framing OBJECT IDENTIFIER ::= { dsx3 2 }
plcp OBJECT IDENTIFIER ::= { dsx3 3 }
cwsonetObjects OBJECT IDENTIFIER ::= { sonet 1 }
frameRelay OBJECT IDENTIFIER ::= { basisServices 1 }
frPort OBJECT IDENTIFIER ::= { frameRelay 1 }
frChan OBJECT IDENTIFIER ::= { frameRelay 2 }
frPortCnf OBJECT IDENTIFIER ::= { frPort 1 }
frPortCnfSig OBJECT IDENTIFIER ::= { frPortCnf 2 }
frPortCnfX21PortGrp OBJECT IDENTIFIER ::= { frPortCnf 3 }
frPortServiceQueGrp OBJECT IDENTIFIER ::= { frPortCnf 4 }
frPortCnfResPartGrp OBJECT IDENTIFIER ::= { frPortCnf 5 }
frPortCnt OBJECT IDENTIFIER ::= { frPort 2 }
frPortCntSig OBJECT IDENTIFIER ::= { frPortCnt 2 }
atm OBJECT IDENTIFIER ::= { basisServices 2 }
ausmPort OBJECT IDENTIFIER ::= { atm 1 }
ausmPortCnf OBJECT IDENTIFIER ::= { ausmPort 1 }
ausmPortCnt OBJECT IDENTIFIER ::= { ausmPort 3 }
ausmChan OBJECT IDENTIFIER ::= { atm 2 }
circuitEmulation OBJECT IDENTIFIER ::= { basisServices 3 }
cesmChan OBJECT IDENTIFIER ::= { circuitEmulation 2 }
sna OBJECT IDENTIFIER ::= { basisServices 4 }
snaport OBJECT IDENTIFIER ::= { sna 1 }
snaportCnf OBJECT IDENTIFIER ::= { snaport 1 }
snaportCnfSig OBJECT IDENTIFIER ::= { snaportCnf 2 }
snaportCnt OBJECT IDENTIFIER ::= { snaport 2 }
snaPortCntSig OBJECT IDENTIFIER ::= { snaportCnt 2 }
voice OBJECT IDENTIFIER ::= { basisServices 5 }
vismPort OBJECT IDENTIFIER ::= { voice 2 }
vismChanGrp OBJECT IDENTIFIER ::= { voice 3 }
vismChanCnfGrp OBJECT IDENTIFIER ::= { vismChanGrp 1 }
atmLines OBJECT IDENTIFIER ::= { atm 5 }
bbInterface OBJECT IDENTIFIER ::= { atm 6 }
bbChan OBJECT IDENTIFIER ::= { atm 7 }
virtualInterface OBJECT IDENTIFIER ::= { atm 8 }
rpmInterface OBJECT IDENTIFIER ::= { atm 9 }
rpmChan OBJECT IDENTIFIER ::= { atm 10 }
atmLineCnfGrp OBJECT IDENTIFIER ::= { atmLines 1 }
atmLineCntGrp OBJECT IDENTIFIER ::= { atmLines 2 }
bbIfCnf OBJECT IDENTIFIER ::= { bbInterface 1 }
bbIfCnfResPartGrp OBJECT IDENTIFIER ::= { bbInterface 2 }
bbIfStateGrp OBJECT IDENTIFIER ::= { bbInterface 3 }
bbIfCnt OBJECT IDENTIFIER ::= { bbInterface 4 }
bbChanCnfGrp OBJECT IDENTIFIER ::= { bbChan 1 }
bbChanStateGrp OBJECT IDENTIFIER ::= { bbChan 2 }
bbChanCntGrp OBJECT IDENTIFIER ::= { bbChan 3 }
rpmPort OBJECT IDENTIFIER ::= { rpmInterface 1 }
rpmChanGrp OBJECT IDENTIFIER ::= { rpmChan 1 }
END

129
snmp_mib_archive/BASIS-ONLINE-DIAG-MIB.my 2
View File

@ -1,129 +0,0 @@
-- *****************************************************************
-- BASIS-ONLINE-DIAG-MIB
-- Online diagnostics mib
--
-- June 2003 Subra Hegde
--
-- Copyright (c) 2003 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
BASIS-ONLINE-DIAG-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
ciscoWan FROM CISCOWAN-SMI
axisDiagnostics FROM BASIS-MIB;
basisOnlineDiagMIB MODULE-IDENTITY
LAST-UPDATED "200306110000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"This MIB contains information on the online diagnostics
in MGX82xx(MGX8250, MGX8220, MGX8230 etc) products."
REVISION "200306110000Z"
DESCRIPTION
"Initial version of the MIB.
The content of this MIB was originally available
in CISCO-WAN-AXIPOP-MIB defined using SMIv1.
The applicable objects from CISCO-WAN-AXIPOP-MIB
are defined using SMIv2 in this MIB. Also the
descriptions of some of the objects have been
modified."
::= { ciscoWan 80 }
onlineDiagnostics OBJECT IDENTIFIER ::= { axisDiagnostics 3 }
diagType OBJECT-TYPE
SYNTAX INTEGER {
post (1),
onlinediag(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is used to identify the type of diagnostics.
post (1) : Power On Self Test.
onlineDiag(2) : Online Diagnostics.
When a trap is sent to report diagnostics results
this is used as a varbind to indicate the type of
diagnostics."
::= { onlineDiagnostics 1 }
diagResult OBJECT-TYPE
SYNTAX INTEGER {
passed(1),
failed(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is used to indicate the result of the diagnostics."
::= { onlineDiagnostics 2 }
diagTestId OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is used to indicate the test number of the
diagnostics test that failed. The value depends upon
the implementation in the each of the MGX82xx product."
::= { onlineDiagnostics 3 }
-- conformance information
boDiagMIBConformance OBJECT IDENTIFIER ::= { basisOnlineDiagMIB 2 }
boDiagMIBCompliances OBJECT IDENTIFIER ::= { boDiagMIBConformance 1 }
boDiagMIBGroups OBJECT IDENTIFIER ::= { boDiagMIBConformance 2 }
-- compliance statements
boDiagCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the basis online diagnostics MIB."
MODULE -- this module
MANDATORY-GROUPS {
boDiagGroup
}
::= { boDiagMIBCompliances 1 }
boDiagGroup OBJECT-GROUP
OBJECTS {
diagType,
diagResult,
diagTestId
}
STATUS current
DESCRIPTION
"A collection of objects providing the
online diagnostics information."
::= { boDiagMIBGroups 1 }
END

0
snmp_mib_archive/BASIS-RAS-DISK-MIB.my 2
View File

193
snmp_mib_archive/BASIS-SERIAL-MIB.my 2
View File

@ -1,193 +0,0 @@
-- *****************************************************************
-- BASIS-SERIAL-MIB: Serial Port MIB MGX8250 and MGX8220 products.
--
-- May 2003, Subra Hegde
--
-- Copyright (c) 2003 by cisco Systems, Inc.
-- All rights reserved.
-- ****************************************************************
BASIS-SERIAL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32 FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
basisLines FROM BASIS-MIB
ciscoWan FROM CISCOWAN-SMI;
basisSerialMIB MODULE-IDENTITY
LAST-UPDATED "200305030000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"The MIB module to configure serial ports
in Processor Module and different Service
Modules(cards) in MGX8850,MGX8250 and MGX8220
ATM Edge switches."
REVISION "200305030000Z"
DESCRIPTION
"Initial version of the MIB.
The content of this MIB was originally available
in CISCO-WAN-AXIPOP-MIB defined using SMIv1.
The applicable objects from CISCO-WAN-AXIPOP-MIB
are defined using SMIv2 in this MIB. Also the
descriptions of some of the objects have been
modified."
::= { ciscoWan 69 }
serialInterface OBJECT IDENTIFIER ::= {basisLines 1}
-- ***************************************************************
--
-- serial interface table
--
-- ***************************************************************
serialPortNumOfValidEntries OBJECT-TYPE
SYNTAX Integer32(1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains number of serial ports.
This identifies the number of entries in
serialInterfacetable."
::= { serialInterface 2 }
serialInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF SerialInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents Physical serial interfaces in
the module."
::= { serialInterface 1 }
serialInterfaceEntry OBJECT-TYPE
SYNTAX SerialInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for each serial interface.
Each entry contains information on
port type, port speed."
INDEX { serialPortNum }
::= { serialInterfaceTable 1}
SerialInterfaceEntry ::=
SEQUENCE {
serialPortNum Integer32,
serialPortType INTEGER,
serialPortEnable INTEGER,
serialPortbps INTEGER
}
serialPortNum OBJECT-TYPE
SYNTAX Integer32(1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the serial port number.
The value 1 is used for Console Port.
The Console Port is also known as control port(CP).
The value 2 is used for Maintenance Port
and this can be used as SLIP
(Serial Line Internet Protocol) interface.
The Maintenance Port is also known as
Modem Port(MP)."
::= { serialInterfaceEntry 1 }
serialPortType OBJECT-TYPE
SYNTAX INTEGER {
main (1),
debug (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the type of port.
main(1) : This is applicable for Maintenance Port
debug(2) : This is applicable for Console Port."
::= { serialInterfaceEntry 2 }
serialPortEnable OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for enabling/disabling
serial port."
::= { serialInterfaceEntry 3 }
serialPortbps OBJECT-TYPE
SYNTAX INTEGER {
bps9600 (1),
bps2400 (2),
bps19200 (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the baud rate of the ports."
DEFVAL { bps9600 }
::= { serialInterfaceEntry 4 }
-- conformance information
basisSerialMIBConformance OBJECT IDENTIFIER ::= { basisSerialMIB 2 }
basisSerialMIBGroups OBJECT IDENTIFIER ::=
{ basisSerialMIBConformance 1 }
basisSerialMIBCompliances OBJECT IDENTIFIER ::=
{ basisSerialMIBConformance 2 }
-- compliance statements
basisSerialCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for objects related
to Serial Ports."
MODULE -- this module
MANDATORY-GROUPS {
basisSerialConfGroup
}
::= { basisSerialMIBCompliances 1 }
basisSerialConfGroup OBJECT-GROUP
OBJECTS {
serialPortNumOfValidEntries,
serialPortNum,
serialPortType,
serialPortEnable,
serialPortbps
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent
serial ports."
::= { basisSerialMIBGroups 1 }
END

1114
snmp_mib_archive/BASIS-SHELF-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

125
snmp_mib_archive/BAY-STACK-ARP-INSPECTION-MIB.mib
View File

@ -1,125 +0,0 @@
BAY-STACK-ARP-INSPECTION-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY
FROM SNMPv2-SMI
TruthValue
FROM SNMPv2-TC
InterfaceIndex
FROM IF-MIB
VlanIndex
FROM Q-BRIDGE-MIB
bayStackMibs
FROM SYNOPTICS-ROOT-MIB;
bayStackArpInspectionMib MODULE-IDENTITY
LAST-UPDATED "200606230000Z"
ORGANIZATION "Nortel Ltd."
CONTACT-INFO "nortel.com"
DESCRIPTION
"This MIB module is used for ARP inspection configuration
settings in Nortel's software and products."
REVISION "200606230000Z" -- June 23, 2006
DESCRIPTION
"Ver 1: Initial version."
::= { bayStackMibs 18 }
bsArpInspectionNotifications
OBJECT IDENTIFIER ::= { bayStackArpInspectionMib 0 }
bsArpInspectionObjects
OBJECT IDENTIFIER ::= { bayStackArpInspectionMib 1 }
--
-- VLAN table
--
bsArpInspectionVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF BsArpInspectionVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to control ARP inspection settings per-VLAN."
::= { bsArpInspectionObjects 1 }
bsArpInspectionVlanEntry OBJECT-TYPE
SYNTAX BsArpInspectionVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing objects for controlling ARP inspection settings
for a VLAN."
INDEX { bsArpInspectionVlanId }
::= { bsArpInspectionVlanTable 1 }
BsArpInspectionVlanEntry ::=
SEQUENCE {
bsArpInspectionVlanId VlanIndex,
bsArpInspectionVlanEnabled TruthValue
}
bsArpInspectionVlanId OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID value of the VLAN."
::= { bsArpInspectionVlanEntry 1 }
bsArpInspectionVlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to control whether ARP inspection is enabled
for this VLAN."
::= { bsArpInspectionVlanEntry 2 }
--
-- Interface table
--
bsArpInspectionIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF BsArpInspectionIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to control ARP inspection settings per-interface."
::= { bsArpInspectionObjects 2 }
bsArpInspectionIfEntry OBJECT-TYPE
SYNTAX BsArpInspectionIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing objects for controlling ARP inspection settings
for an interface."
INDEX { bsArpInspectionIfIndex }
::= { bsArpInspectionIfTable 1 }
BsArpInspectionIfEntry ::=
SEQUENCE {
bsArpInspectionIfIndex InterfaceIndex,
bsArpInspectionIfTrusted TruthValue
}
bsArpInspectionIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface."
::= { bsArpInspectionIfEntry 1 }
bsArpInspectionIfTrusted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to control whether this interface is trusted
for ARP inspection purposes."
::= { bsArpInspectionIfEntry 2 }
END

833
snmp_mib_archive/BGP4-MIB.my 2
View File

@ -1,833 +0,0 @@
-- *****************************************************************
-- BGP4-MIB.my: BGP-4 MIB file
--
-- May 1994, Jeffrey T. Johnson
--
-- Copyright (c) 1994-1995 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
--
-- This mib was extracted from RFC1657
BGP4-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
IpAddress, Integer32, Counter32, Gauge32
FROM SNMPv2-SMI
mib-2
FROM RFC1213-MIB;
bgp MODULE-IDENTITY
LAST-UPDATED "9405050000Z"
ORGANIZATION "IETF BGP Working Group"
CONTACT-INFO
" John Chu (Editor)
Postal: IBM Corp.
P.O.Box 218
Yorktown Heights, NY 10598
US
Tel: +1 914 945 3156
Fax: +1 914 945 2141
E-mail: jychu@watson.ibm.com"
DESCRIPTION
"The MIB module for BGP-4."
::= { mib-2 15 }
bgpVersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vector of supported BGP protocol version
numbers. Each peer negotiates the version
from this vector. Versions are identified
via the string of bits contained within this
object. The first octet contains bits 0 to
7, the second octet contains bits 8 to 15,
and so on, with the most significant bit
referring to the lowest bit number in the
octet (e.g., the MSB of the first octet
refers to bit 0). If a bit, i, is present
and set, then the version (i+1) of the BGP
is supported."
::= { bgp 1 }
bgpLocalAs OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local autonomous system number."
::= { bgp 2 }
-- BGP Peer table. This table contains, one entry per
-- BGP peer, information about the BGP peer.
bgpPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP peer table. This table contains,
one entry per BGP peer, information about
the connections with BGP peers."
::= { bgp 3 }
bgpPeerEntry OBJECT-TYPE
SYNTAX BgpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about the
connection with a BGP peer."
INDEX { bgpPeerRemoteAddr }
::= { bgpPeerTable 1 }
BgpPeerEntry ::= SEQUENCE {
bgpPeerIdentifier
IpAddress,
bgpPeerState
INTEGER,
bgpPeerAdminStatus
INTEGER,
bgpPeerNegotiatedVersion
Integer32,
bgpPeerLocalAddr
IpAddress,
bgpPeerLocalPort
INTEGER,
bgpPeerRemoteAddr
IpAddress,
bgpPeerRemotePort
INTEGER,
bgpPeerRemoteAs
INTEGER,
bgpPeerInUpdates
Counter32,
bgpPeerOutUpdates
Counter32,
bgpPeerInTotalMessages
Counter32,
bgpPeerOutTotalMessages
Counter32,
bgpPeerLastError
OCTET STRING,
bgpPeerFsmEstablishedTransitions
Counter32,
bgpPeerFsmEstablishedTime
Gauge32,
bgpPeerConnectRetryInterval
INTEGER,
bgpPeerHoldTime
INTEGER,
bgpPeerKeepAlive
INTEGER,
bgpPeerHoldTimeConfigured
INTEGER,
bgpPeerKeepAliveConfigured
INTEGER,
bgpPeerMinASOriginationInterval
INTEGER,
bgpPeerMinRouteAdvertisementInterval
INTEGER,
bgpPeerInUpdateElapsedTime
Gauge32
}
bgpPeerIdentifier OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP Identifier of this entry's BGP
peer."
::= { bgpPeerEntry 1 }
bgpPeerState OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
connect(2),
active(3),
opensent(4),
openconfirm(5),
established(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP peer connection state."
::= { bgpPeerEntry 2 }
bgpPeerAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
stop(1),
start(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired state of the BGP connection.
A transition from 'stop' to 'start' will
cause the BGP Start Event to be generated.
A transition from 'start' to 'stop' will
cause the BGP Stop Event to be generated.
This parameter can be used to restart BGP
peer connections. Care should be used in
providing write access to this object
without adequate authentication."
::= { bgpPeerEntry 3 }
bgpPeerNegotiatedVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated version of BGP running
between the two peers."
::= { bgpPeerEntry 4 }
bgpPeerLocalAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local IP address of this entry's BGP
connection."
::= { bgpPeerEntry 5 }
bgpPeerLocalPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local port for the TCP connection
between the BGP peers."
::= { bgpPeerEntry 6 }
bgpPeerRemoteAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote IP address of this entry's BGP
peer."
::= { bgpPeerEntry 7 }
bgpPeerRemotePort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote port for the TCP connection
between the BGP peers. Note that the
objects bgpPeerLocalAddr,
bgpPeerLocalPort, bgpPeerRemoteAddr and
bgpPeerRemotePort provide the appropriate
reference to the standard MIB TCP
connection table."
::= { bgpPeerEntry 8 }
bgpPeerRemoteAs OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote autonomous system number."
::= { bgpPeerEntry 9 }
bgpPeerInUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP UPDATE messages
received on this connection. This object
should be initialized to zero (0) when the
connection is established."
::= { bgpPeerEntry 10 }
bgpPeerOutUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP UPDATE messages
transmitted on this connection. This
object should be initialized to zero (0)
when the connection is established."
::= { bgpPeerEntry 11 }
bgpPeerInTotalMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages received
from the remote peer on this connection.
This object should be initialized to zero
when the connection is established."
::= { bgpPeerEntry 12 }
bgpPeerOutTotalMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages transmitted to
the remote peer on this connection. This
object should be initialized to zero when
the connection is established."
::= { bgpPeerEntry 13 }
bgpPeerLastError OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code and subcode seen by this
peer on this connection. If no error has
occurred, this field is zero. Otherwise, the
first byte of this two byte OCTET STRING
contains the error code, and the second byte
contains the subcode."
::= { bgpPeerEntry 14 }
bgpPeerFsmEstablishedTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the BGP FSM
transitioned into the established state."
::= { bgpPeerEntry 15 }
bgpPeerFsmEstablishedTime OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This timer indicates how long (in
seconds) this peer has been in the
Established state or how long
since this peer was last in the
Established state. It is set to zero when
a new peer is configured or the router is
booted."
::= { bgpPeerEntry 16 }
bgpPeerConnectRetryInterval OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval in seconds for the
ConnectRetry timer. The suggested value
for this timer is 120 seconds."
::= { bgpPeerEntry 17 }
bgpPeerHoldTime OBJECT-TYPE
SYNTAX INTEGER ( 0 | 3..65535 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the Hold
Timer established with the peer. The
value of this object is calculated by this
BGP speaker by using the smaller of the
value in bgpPeerHoldTimeConfigured and the
Hold Time received in the OPEN message.
This value must be at lease three seconds
if it is not zero (0) in which case the
Hold Timer has not been established with
the peer, or, the value of
bgpPeerHoldTimeConfigured is zero (0)."
::= { bgpPeerEntry 18 }
bgpPeerKeepAlive OBJECT-TYPE
SYNTAX INTEGER ( 0 | 1..21845 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the KeepAlive
timer established with the peer. The value
of this object is calculated by this BGP
speaker such that, when compared with
bgpPeerHoldTime, it has the same
proportion as what
bgpPeerKeepAliveConfigured has when
compared with bgpPeerHoldTimeConfigured.
If the value of this object is zero (0),
it indicates that the KeepAlive timer has
not been established with the peer, or,
the value of bgpPeerKeepAliveConfigured is
zero (0)."
::= { bgpPeerEntry 19 }
bgpPeerHoldTimeConfigured OBJECT-TYPE
SYNTAX INTEGER ( 0 | 3..65535 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval in seconds for the Hold Time
configured for this BGP speaker with this
peer. This value is placed in an OPEN
message sent to this peer by this BGP
speaker, and is compared with the Hold
Time field in an OPEN message received
from the peer when determining the Hold
Time (bgpPeerHoldTime) with the peer.
This value must not be less than three
seconds if it is not zero (0) in which
case the Hold Time is NOT to be
established with the peer. The suggested
value for this timer is 90 seconds."
::= { bgpPeerEntry 20 }
bgpPeerKeepAliveConfigured OBJECT-TYPE
SYNTAX INTEGER ( 0 | 1..21845 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval in seconds for the
KeepAlive timer configured for this BGP
speaker with this peer. The value of this
object will only determine the
KEEPALIVE messages' frequency relative to
the value specified in
bgpPeerHoldTimeConfigured; the actual
time interval for the KEEPALIVE messages
is indicated by bgpPeerKeepAlive. A
reasonable maximum value for this timer
would be configured to be one
third of that of
bgpPeerHoldTimeConfigured.
If the value of this object is zero (0),
no periodical KEEPALIVE messages are sent
to the peer after the BGP connection has
been established. The suggested value for
this timer is 30 seconds."
::= { bgpPeerEntry 21 }
bgpPeerMinASOriginationInterval OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval in seconds for the
MinASOriginationInterval timer.
The suggested value for this timer is 15
seconds."
::= { bgpPeerEntry 22 }
bgpPeerMinRouteAdvertisementInterval OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval in seconds for the
MinRouteAdvertisementInterval timer.
The suggested value for this timer is 30
seconds."
::= { bgpPeerEntry 23 }
bgpPeerInUpdateElapsedTime OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Elapsed time in seconds since the last BGP
UPDATE message was received from the peer.
Each time bgpPeerInUpdates is incremented,
the value of this object is set to zero
(0)."
::= { bgpPeerEntry 24 }
bgpIdentifier OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP Identifier of local system."
::= { bgp 4 }
-- Received Path Attribute Table. This table contains,
-- one entry per path to a network, path attributes
-- received from all peers running BGP version 3 or
-- less. This table is deprecated.
bgpRcvdPathAttrTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpPathAttrEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The BGP Received Path Attribute Table
contains information about paths to
destination networks received from all
peers running BGP version 3 or less."
::= { bgp 5 }
bgpPathAttrEntry OBJECT-TYPE
SYNTAX BgpPathAttrEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Information about a path to a network."
INDEX { bgpPathAttrDestNetwork,
bgpPathAttrPeer }
::= { bgpRcvdPathAttrTable 1 }
BgpPathAttrEntry ::= SEQUENCE {
bgpPathAttrPeer
IpAddress,
bgpPathAttrDestNetwork
IpAddress,
bgpPathAttrOrigin
INTEGER,
bgpPathAttrASPath
OCTET STRING,
bgpPathAttrNextHop
IpAddress,
bgpPathAttrInterASMetric
Integer32
}
bgpPathAttrPeer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The IP address of the peer where the path
information was learned."
::= { bgpPathAttrEntry 1 }
bgpPathAttrDestNetwork OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The address of the destination network."
::= { bgpPathAttrEntry 2 }
bgpPathAttrOrigin OBJECT-TYPE
SYNTAX INTEGER {
igp(1),-- networks are interior
egp(2),-- networks learned via EGP
incomplete(3) -- undetermined
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The ultimate origin of the path information."
::= { bgpPathAttrEntry 3 }
bgpPathAttrASPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2..255))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The set of ASs that must be traversed to
reach the network. This object is
probably best represented as SEQUENCE OF
INTEGER. For SMI compatibility, though,
it is represented as OCTET STRING. Each
AS is represented as a pair of octets
according to the following algorithm:
first-byte-of-pair = ASNumber / 256;
second-byte-of-pair = ASNumber & 255;"
::= { bgpPathAttrEntry 4 }
bgpPathAttrNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The address of the border router that
should be used for the destination
network."
::= { bgpPathAttrEntry 5 }
bgpPathAttrInterASMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The optional inter-AS metric. If this
attribute has not been provided for this
route, the value for this object is 0."
::= { bgpPathAttrEntry 6 }
-- BGP-4 Received Path Attribute Table. This table
-- contains, one entry per path to a network, path
-- attributes received from all peers running BGP-4.
bgp4PathAttrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Bgp4PathAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP-4 Received Path Attribute Table
contains information about paths to
destination networks received from all
BGP4 peers."
::= { bgp 6 }
bgp4PathAttrEntry OBJECT-TYPE
SYNTAX Bgp4PathAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a path to a network."
INDEX { bgp4PathAttrIpAddrPrefix,
bgp4PathAttrIpAddrPrefixLen,
bgp4PathAttrPeer }
::= { bgp4PathAttrTable 1 }
Bgp4PathAttrEntry ::= SEQUENCE {
bgp4PathAttrPeer
IpAddress,
bgp4PathAttrIpAddrPrefixLen
INTEGER,
bgp4PathAttrIpAddrPrefix
IpAddress,
bgp4PathAttrOrigin
INTEGER,
bgp4PathAttrASPathSegment
OCTET STRING,
bgp4PathAttrNextHop
IpAddress,
bgp4PathAttrMultiExitDisc
INTEGER,
bgp4PathAttrLocalPref
INTEGER,
bgp4PathAttrAtomicAggregate
INTEGER,
bgp4PathAttrAggregatorAS
INTEGER,
bgp4PathAttrAggregatorAddr
IpAddress,
bgp4PathAttrCalcLocalPref
INTEGER,
bgp4PathAttrBest
INTEGER,
bgp4PathAttrUnknown
OCTET STRING
}
bgp4PathAttrPeer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the peer where the path
information was learned."
::= { bgp4PathAttrEntry 1 }
bgp4PathAttrIpAddrPrefixLen OBJECT-TYPE
SYNTAX INTEGER (0..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Length in bits of the IP address prefix
in the Network Layer Reachability
Information field."
::= { bgp4PathAttrEntry 2 }
bgp4PathAttrIpAddrPrefix OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An IP address prefix in the Network Layer
Reachability Information field. This object
is an IP address containing the prefix with
length specified by
bgp4PathAttrIpAddrPrefixLen.
Any bits beyond the length specified by
bgp4PathAttrIpAddrPrefixLen are zeroed."
::= { bgp4PathAttrEntry 3 }
bgp4PathAttrOrigin OBJECT-TYPE
SYNTAX INTEGER {
igp(1),-- networks are interior
egp(2),-- networks learned
-- via EGP
incomplete(3) -- undetermined
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ultimate origin of the path
information."
::= { bgp4PathAttrEntry 4 }
bgp4PathAttrASPathSegment OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence of AS path segments. Each AS
path segment is represented by a triple
<type, length, value>.
The type is a 1-octet field which has two
possible values:
1 AS_SET: unordered set of ASs a
route in the UPDATE
message has traversed
2 AS_SEQUENCE: ordered set of ASs
a route in the UPDATE
message has traversed.
The length is a 1-octet field containing the
number of ASs in the value field.
The value field contains one or more AS
numbers, each AS is represented in the octet
string as a pair of octets according to the
following algorithm:
first-byte-of-pair = ASNumber / 256;
second-byte-of-pair = ASNumber & 255;"
::= { bgp4PathAttrEntry 5 }
bgp4PathAttrNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the border router that
should be used for the destination
network."
::= { bgp4PathAttrEntry 6 }
bgp4PathAttrMultiExitDisc OBJECT-TYPE
SYNTAX INTEGER (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This metric is used to discriminate
between multiple exit points to an
adjacent autonomous system. A value of -1
indicates the absence of this attribute."
::= { bgp4PathAttrEntry 7 }
bgp4PathAttrLocalPref OBJECT-TYPE
SYNTAX INTEGER (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The originating BGP4 speaker's degree of
preference for an advertised route. A
value of -1 indicates the absence of this
attribute."
::= { bgp4PathAttrEntry 8 }
bgp4PathAttrAtomicAggregate OBJECT-TYPE
SYNTAX INTEGER {
lessSpecificRrouteNotSelected(1),
lessSpecificRouteSelected(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether or not the local system has
selected a less specific route without
selecting a more specific route."
::= { bgp4PathAttrEntry 9 }
bgp4PathAttrAggregatorAS OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS number of the last BGP4 speaker that
performed route aggregation. A value of
zero (0) indicates the absence of this
attribute."
::= { bgp4PathAttrEntry 10 }
bgp4PathAttrAggregatorAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the last BGP4 speaker
that performed route aggregation. A value
of 0.0.0.0 indicates the absence of this
attribute."
::= { bgp4PathAttrEntry 11 }
bgp4PathAttrCalcLocalPref OBJECT-TYPE
SYNTAX INTEGER (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The degree of preference calculated by the
receiving BGP4 speaker for an advertised
route. A value of -1 indicates the
absence of this attribute."
::= { bgp4PathAttrEntry 12 }
bgp4PathAttrBest OBJECT-TYPE
SYNTAX INTEGER {
false(1),-- not chosen as best route
true(2) -- chosen as best route
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether or not this route
was chosen as the best BGP4 route."
::= { bgp4PathAttrEntry 13 }
bgp4PathAttrUnknown OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One or more path attributes not understood
by this BGP4 speaker. Size zero (0)
indicates the absence of such
attribute(s). Octets beyond the maximum
size, if any, are not recorded by this
object."
::= { bgp4PathAttrEntry 14 }
-- Traps.
bgpTraps OBJECT IDENTIFIER ::= { bgp 7 }
bgpEstablished NOTIFICATION-TYPE
OBJECTS { bgpPeerLastError,
bgpPeerState }
STATUS current
DESCRIPTION
"The BGP Established event is generated when
the BGP FSM enters the ESTABLISHED state."
::= { bgpTraps 1 }
bgpBackwardTransition NOTIFICATION-TYPE
OBJECTS { bgpPeerLastError,
bgpPeerState }
STATUS current
DESCRIPTION
"The BGPBackwardTransition Event is generated
when the BGP FSM moves from a higher numbered
state to a lower numbered state."
::= { bgpTraps 2 }
END

1503
snmp_mib_archive/BRIDGE-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

505
snmp_mib_archive/CALISTA-DPA-MIB.my 2
View File

@ -1,505 +0,0 @@
CALISTA-DPA-MIB DEFINITIONS ::= BEGIN
-- This MIB is for management of Cisco DPA voicemail gateway devices.
-- These allow interfacing of Octel voicemail systems with Cisco
-- CallManager.
IMPORTS
IpAddress, Counter, enterprises
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212;
DisplayString ::= OCTET STRING
calista OBJECT IDENTIFIER ::= { enterprises 7505 }
products OBJECT IDENTIFIER ::= { calista 1 }
dpa OBJECT IDENTIFIER ::= { products 1 }
serialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unique value assigned to each DPA device."
::= { dpa 1 }
imageVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of the main image code that the DPA
is currently running."
::= { dpa 2 }
loaderVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of the boot loader code that the DPA
is currently running."
::= { dpa 3 }
integrationMode OBJECT-TYPE
SYNTAX INTEGER { unconfigured(1), simple(2), hybrid(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The integration mode in which the DPA is currently
operating:
unconfigured the factory setting; the DPA requires
configuring before it can be connected
to an Octel voicemail system.
simple the DPA is connected to only an Octel
voicemail system and Cisco CallManager
hybrid the DPA is connected to an Octel
voicemail system, a PBX system and
Cisco CallManager
See the DPA Administration Guide for more detailed
descriptions of these modes."
::= { dpa 4 }
pbxType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The PBX type that the DPA is currently emulating in order
to communicate with the Octel voicemail system. This also
determines the protocol used on the digital telephony
links to the PBX, if in hybrid mode."
::= { dpa 5 }
receivedCalls OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of IP telephony calls made to this DPA. This
includes all calls, regardless of whether the Octel
answered. This could happen, for instance, if the original
caller hangs up before the Octel accepts the call."
::= { dpa 6 }
outgoingCallsMade OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of calls originated by the Octel which go
through the DPA. These include networking calls
(communication between peer Octel systems), pager and
mobile notifications and fax calls."
::= { dpa 7 }
mwiCommandsReceived OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of commands to set or clear a Message Waiting
Indicator received by this DPA from the Octel voicemail
system. These commands are relayed to the Cisco
CallManager via the virtual port, and, if the DPA is
operating in hybrid mode, the attached PBX system."
::= { dpa 8 }
pbxQueuedMWICommands OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of commands to set or clear a Message Waiting
Indicator which are queued within the DPA, waiting to be
sent to the PBX. These commands will be issued to the PBX
when the appropriate port becomes available.
If the DPA is not operating in hybrid mode, this value will
always be zero."
::= { dpa 9 }
pbxCompletedMWICommands OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of commands to set or clear a Message Waiting
Indicator which have been successfully sent to the PBX.
If the DPA is not operating in hybrid mode, this value will
always be zero."
::= { dpa 10 }
pbxMWIErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of commands to set or clear a Message Waiting
Indicator that the DPA was unable to send successfully to
the PBX. Such commands will have been discarded, and the
cause written to the DPA's error log.
If the DPA is not operating in hybrid mode, this value will
always be zero."
::= { dpa 11 }
callManagerQueuedMWICommands OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of commands to set or clear a Message Waiting
Indicator which are queued within the DPA, waiting to be
sent to Cisco CallManager."
::= { dpa 12 }
callManagerCompletedMWICommands OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of commands to set or clear a Message Waiting
Indicator which have been successfully sent to Cisco
CallManager."
::= { dpa 13 }
callManagerMWIErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of commands to set or clear a Message Waiting
Indicator that the DPA was unable to send successfully to
Cisco CallManager. Such commands will have been discarded,
and the cause written to the DPA's error log."
::= { dpa 14 }
portTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of the available ports on the DPA, with current state
information for each."
::= { dpa 15 }
portEntry OBJECT-TYPE
SYNTAX PortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing all relevant information for a DPA port."
INDEX { portIndex }
::= { portTable 1 }
PortEntry ::=
SEQUENCE {
portIndex
INTEGER,
portType
INTEGER,
portTelephonyLinkState
INTEGER,
portCallManagerLinkState
INTEGER,
portCallState
INTEGER,
portDeviceName
DisplayString,
portCodecInUse
INTEGER,
portErrors
INTEGER,
portDacLevel
INTEGER
}
portIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each port. Its value ranges from
1 to the total number of ports."
::= { portEntry 1 }
portType OBJECT-TYPE
SYNTAX INTEGER { notInUse(1), octel(2), pbx(3), virtual(4) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"How this port is currently being used:
notInUse not currently in use (may become active later)
octel connected to an Octel voicemail system
pbx connected to a digital PBX
virtual not a physical port; connected only to
Cisco CallManager
It should be noted that the type of a port is determined when
it first becomes active. Significantly, this value will not
change back to notInUse if a port is later disconnected; the
relevant portTelephonyLinkState value should be read to
determine whether the port is currently active."
::= { portEntry 2 }
portTelephonyLinkState OBJECT-TYPE
SYNTAX INTEGER { notApplicable(1),
down(2),
registering(3),
up(4) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the digital telephony link. This field only has
meaning for physical ports connected to Octel voicemail systems
or digital PBX systems. For virtual ports or those currently
not in use, the state will be returned as notApplicable."
::= { portEntry 3 }
portCallManagerLinkState OBJECT-TYPE
SYNTAX INTEGER { notApplicable(1),
down(2),
registering(3),
up(4) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of this port's connection to a Cisco CallManager,
if such a connection exists. For ports connected to digital
PBX systems (see the portType entry) this will be returned as
notApplicable."
::= { portEntry 4 }
portCallState OBJECT-TYPE
SYNTAX INTEGER { unknown(1),
notApplicable(2),
onHook(3),
callIn(4),
callOut(5),
onCall(6),
offHook(7),
transfer(8),
outCall(9),
hangingUp(10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Once a port's required link(s) to an Octel / PBX and
CallManager have become active, it then becomes available for
use placing calls between the two realms. This entry shows the
current state of any active call for a port, as described in
the DPA Administration Guide."
::= { portEntry 5 }
portDeviceName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The device name under which this port is registered with
Cisco CallManager."
::= { portEntry 6 }
portCodecInUse OBJECT-TYPE
SYNTAX INTEGER { none(1),
g711ALaw(2),
g711MuLaw(3),
g723dot1(4),
g729a(5) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If there is a call in progress on this port, this entry gives
the codec in use, otherwise it will return none."
::= { portEntry 7 }
portErrors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of centiseconds during which PBX protocol errors
were detected for this port. It is normal for there to be
some errors, especially during port initialization, but very
large values should only be seen on disconnected ports."
::= { portEntry 8 }
portDacLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The DAC level for the port; this is related to the voltage
level on the digital telephony port, and is only used in
diagnosis of internal hardware faults."
::= { portEntry 9 }
callManagerConnectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF CallManagerConnectionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of all of the Cisco CallManager connections that the
DPA is currently maintaining."
::= { dpa 16 }
callManagerConnectionEntry OBJECT-TYPE
SYNTAX CallManagerConnectionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing all relevant information for a connection
to a Cisco CallManager device."
INDEX { portIndex, cmConnectionIndex }
::= { callManagerConnectionTable 1 }
CallManagerConnectionEntry ::=
SEQUENCE {
cmConnectionPortIndex
INTEGER,
cmConnectionIndex
INTEGER,
cmConnectionCallManagerName
DisplayString,
cmConnectionIpAddress
IpAddress,
cmConnectionIpPort
INTEGER (0..65535),
cmConnectionState
INTEGER
}
cmConnectionPortIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Corresponds to portIndex in PortEntry."
::= { callManagerConnectionEntry 1}
cmConnectionIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of this connection; each port can have connections
to several Cisco CallManagers, with one active connection and
the rest operating in standby mode."
::= { callManagerConnectionEntry 2 }
cmConnectionCallManagerName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The host name, if known, of the CallManager to which this
connection refers."
::= { callManagerConnectionEntry 3 }
cmConnectionIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the CallManager to which this connection
refers."
::= { callManagerConnectionEntry 4 }
cmConnectionIpPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The TCP port number on the CallManager to which this connection
has been made."
::= { callManagerConnectionEntry 5 }
cmConnectionState OBJECT-TYPE
SYNTAX INTEGER { idle(1),
connecting(2),
retryBackOff(3),
connectPending(4),
active(5),
standby(6) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current state of this connection. The possible values have
the following meanings:
idle initial state of the link before a
connection has been attempted, and the
state to which a link changes after
teardown
connecting a TCP link to a Cisco CallManager system
is in the process of being established
retryBackOff the attempt to establish to the Cisco
CallManager failed; the connection stays in
this state for a short while before the DPA
tries again
connectPending the retry back off period has finished and
the DPA is about to re-attempt connection
to the Cisco CallManager
active the connection has been successfully
established; this state signifies that the
connection is being used for transmission
and reception of Skinny Station Protocol
messages
standby the connection has been successfully
established but it is not currently being
used for data traffic; however, it would
move into the active state were the
currently active connection to go down
"
::= { callManagerConnectionEntry 6 }
END

610
snmp_mib_archive/CISCO-5800-HEALTH-MON-MIB.my 2
View File

@ -1,610 +0,0 @@
-- *****************************************************************
-- CISCO-5800-HEALTH-MON-MIB.my: CISCO Health Monitor MIB file
--
-- August 1997 Mark Szczesniak / Ashadevaki Hegde
--
-- Copyright (c) 1997-1998 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
-- $Endlog$
--
CISCO-5800-HEALTH-MON-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Counter32,
Gauge32,
Integer32,
IpAddress
FROM SNMPv2-SMI
DisplayString,
TruthValue
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
ciscoExperiment
FROM CISCO-SMI;
cisco5800HealthMonMIB MODULE-IDENTITY
LAST-UPDATED "9708260000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-snmp@cisco.com"
DESCRIPTION
"This MIB provides a means to monitor the status of a
system's health."
::= { ciscoExperiment 28 }
cisco5800HealthMonObjects OBJECT IDENTIFIER ::= { cisco5800HealthMonMIB 1 }
--
-- This mib gives you the status of the health monitoring subsystem
-- running on the system controller. Health monitoring allows the user
-- to configure three types of utilization on the system
-- controller. Namely modem, trunk, and io-mem. When io-mem monitoring
-- type is configured on the system controller, health moniotoring sets
-- up the expressions, RMON alarms, RMON events on the known
-- shelves. RMON alarm is asked to monitor the result from the set
-- expression and if it's value exceeds the configured threshold value
-- an event trap is sent to the system-controller. This trap is converted
-- into the healthmon MIB format and sent to the management
-- station. For the other two monitoring types, health monitor sets up
-- the utilization calculation on the system controller based on the info
-- available on this mib.
--
-- Trunk Utilization = (ciscoHealthMonNumActiveDS0 * 100)/
-- (ciscoHealthMonNumTotalDS0)
-- Modem Utilization = (ciscoHealthMonNumModemsInUse * 100)/
-- (ciscoHealthMonNumTotalModems)
--
--
-- 1. ciscoHealthMonStatusTable - This has the status of the configured
-- monitoring types.
--
-- 2. ciscoHealthMonCountTable - This table keeps track of following
-- info from each router shelf:
--
-- o # T1/E1 lines up
-- o # T1/E1 lines with operational status down and admin status up
-- o # of Active DS0's (cpmActiveDS0 from CISCO-POP-MGMT-MIB.my)
-- o # of Total DS0's (#of t1 - 1* 24) + 23 + (#of e1 * 30)
-- o # of Installed modems
-- (cmSystemInstalledModem from CISCO-MODEM-MGMT-MIB.my)
-- o # of Inuse Modems(cmSystemModemsInUse from CISCO-MODEM-MGMT-MIB.my
-- o # of Bad modems (cmSystemModemsUnavailable from CISCO-MODEM-MGMT-MIB.my)
-- o # of IOmem free (IO-mem ciscoMemoryPoolUsed from CISCO-MEMORY-POOL-MIB.my)
-- o # of IOmem used (IO-mem ciscoMemoryPoolFree from CISCO-MEMORY-POOL-MIB.my)
-- o % CPU avgBusy5 (avgBusy5 from cisco-10-mib.my)
-- o % Utilization of ifOutOctets of egress ports
-- A port is considered as an egress port if it's ifSpeed > 1544000
-- % Utilization of ifOutOctets = (diff_total_ifOutoctets*100)/
-- (time * total_speed)
-- o % Utilization of ifInOctets of egress ports
--
-- % Utilization of ifInOctets = (diff_total_ifInOctets*100)/
-- (time * total_speed)
--
-- The above values are collected from a single shelf. They are added
-- together to get the total number in the nitro complex.
-- Example:
-- #T1 & E1 lines UP = (T1 & E1 Lines up on shelf#1) +
-- (T1 & E1 Lines up on shelf#2) +
-- :
-- :
-- (T1 & E1 Lines up on shelf#n)
--
-- NOTE:
-- Monitored shelf - A shelf is discovered by the system controller using
-- the Shelf Discovery Protocol
ciscoHealthMonNumShelves OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of shelves monitored by the health monitor."
::= { cisco5800HealthMonObjects 3 }
ciscoHealthMonNumT1E1LinesUp OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the total number of active T1/E1 lines across
all the monitored shelves."
::= { cisco5800HealthMonObjects 4 }
ciscoHealthMonNumT1E1LinesDown OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the total number of inactive T1/E1 lines
across all the monitored shelves."
::= { cisco5800HealthMonObjects 5 }
ciscoHealthMonNumActiveDS0 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DS0's in use across all the monitored
shelves."
::= { cisco5800HealthMonObjects 6 }
ciscoHealthMonNumTotalDS0 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DS0's from all the monitored shelves."
::= { cisco5800HealthMonObjects 7 }
ciscoHealthMonNumTotalModems OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the total number of ciscoHealthMonTotalModems
from all the monitored shelves."
::= { cisco5800HealthMonObjects 8 }
ciscoHealthMonNumModemsInUse OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the total number of ciscoHealthMonModemsInUse
from all the monitored shelves ."
::= { cisco5800HealthMonObjects 9 }
ciscoHealthMonNumUnavailableModems OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the total number of ciscoHealthMonUnavailableModems
from all the monitored shelves."
::= { cisco5800HealthMonObjects 10 }
ciscoHealthMonStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscoHealthMonStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of status maintained by the health monitor."
::= { cisco5800HealthMonObjects 1 }
ciscoHealthMonStatusEntry OBJECT-TYPE
SYNTAX CiscoHealthMonStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the status table, containing the
information about the status of the health monitoring setup
commands. Depending on the configured monitoring type these commands
are setup on the shelf or on the system controller. Monitoring iomem
is done on the shelf where as monitoring modem and trunk is done on
system controller. ciscoHealthMonShelfId, ciscoHealthMonAddress
doesn't exist for the modem and trunk monitoring types since
they are done on the system controller. "
INDEX { ciscoHealthMonStatusIndex, ciscoHealthMonStatusType }
::= { ciscoHealthMonStatusTable 1 }
CiscoHealthMonStatusEntry ::=
SEQUENCE {
ciscoHealthMonStatusIndex Integer32,
ciscoHealthMonStatusType Integer32 (1..3),
ciscoHealthMonShelfId Integer32,
ciscoHealthMonAddress IpAddress,
ciscoHealthMonDescr DisplayString,
ciscoHealthMonValue Gauge32,
ciscoHealthMonThreshold Integer32 (1..100),
ciscoHealthMonThresholdExceedCount Integer32
}
ciscoHealthMonStatusIndex OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique index for indexing the ciscoHealthMonStatusTable.
This index is for SNMP purposes only, and has no intrinsic meaning."
::= { ciscoHealthMonStatusEntry 1 }
ciscoHealthMonStatusType OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Monitoring type
modemUtil(1), trunkUtil(2), iomemUtil(3)"
::= { ciscoHealthMonStatusEntry 2 }
ciscoHealthMonShelfId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the shelf-id of the monitored shelf."
::= { ciscoHealthMonStatusEntry 3 }
ciscoHealthMonAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the IP address of the monitored shelf."
::= { ciscoHealthMonStatusEntry 4 }
ciscoHealthMonDescr OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Textual description of the utilization type being
monitored on a shelf. This description is a short textual label,
suitable as a human-sensible identification for the rest of the
information in the entry."
::= { ciscoHealthMonStatusEntry 5 }
ciscoHealthMonValue OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current value for the monitoring type on a
monitored shelf."
::= { ciscoHealthMonStatusEntry 6 }
ciscoHealthMonThreshold OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the monitoring threshold value configured
through the command line.
If the configured monitoring type is io-mem, rmon alarm on the
shelf will use this value as the threshold for generating the
event. Shelf will be asked to send this generated event trap to the
system controller. Once the system controller receives this trap,
trap will converted to the health monitor mib format and sent to the
management station.
If the configured monitoring types are trunk and/or modem,
ciscoHealthMonValue is compared with this value and if
ciscoHealthMonValue exceeds this value, a notification is sent to the
configured management station. Also, a notification will be sent to
the management station if the current monitoring value is less than
the configured threshold and the previous monitored value is greater
than the configured threshold value."
::= { ciscoHealthMonStatusEntry 7 }
ciscoHealthMonThresholdExceedCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times monitoring value exceeded the
configured threshold value."
::= { ciscoHealthMonStatusEntry 8 }
--
-- HealthMonCount Table
--
ciscoHealthMonCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscoHealthMonCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of mib entries maintained by the health monitor."
::= { cisco5800HealthMonObjects 2 }
ciscoHealthMonCountEntry OBJECT-TYPE
SYNTAX CiscoHealthMonCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the count table represents the polled data
of ceratin mib variables for a router shelf. System controller will do
the polling of the mib variables only if system controller can
talk to that particular router shelf."
INDEX { ciscoHealthMonCountIndex }
::= { ciscoHealthMonCountTable 1 }
CiscoHealthMonCountEntry ::=
SEQUENCE {
ciscoHealthMonCountIndex Integer32,
ciscoHealthMonT1E1LinesUp Gauge32,
ciscoHealthMonT1E1LinesDown Gauge32,
ciscoHealthMonActiveDS0 Gauge32,
ciscoHealthMonTotalDS0 Gauge32,
ciscoHealthMonTotalModems Gauge32,
ciscoHealthMonModemsInUse Gauge32,
ciscoHealthMonUnavailableModems Gauge32,
ciscoHealthMonIOMemUsed Gauge32,
ciscoHealthMonIOMemFree Gauge32,
ciscoHealthMonCPUavgBusy5 Integer32 (1..100),
ciscoHealthMonUtilEgressInOctet Counter32,
ciscoHealthMonUtilEgressOutOctet Counter32,
ciscoHealthMonShelfLastUpdate DisplayString
}
ciscoHealthMonCountIndex OBJECT-TYPE
SYNTAX Integer32 (0..9999)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique index for indexing the
ciscoHealthMonCountTable. This unique index represents the shelf-id of
the monitored shelf."
::= { ciscoHealthMonCountEntry 1 }
ciscoHealthMonT1E1LinesUp OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of active T1 and E1 lines on a shelf. A
line is considered as an active line if it is operationally up."
::= { ciscoHealthMonCountEntry 2 }
ciscoHealthMonT1E1LinesDown OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inactive T1 and E1 lines on a
shelf. This is the special case where a line is counted as down if it
is operationally down and administratively up."
::= { ciscoHealthMonCountEntry 3 }
ciscoHealthMonActiveDS0 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DS0's that are currently in use."
::= { ciscoHealthMonCountEntry 4 }
ciscoHealthMonTotalDS0 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DS0's on a shelf. This is based
on the number of T1 and E1 lines present on the router shelf.
Total DS0 = (# of T1 lines - 1 * 24) + 23 + (# of E1 lines*30)."
::= { ciscoHealthMonCountEntry 5 }
ciscoHealthMonTotalModems OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of modems installed on a shelf. This
is the polled value for cmSystemInstalledModem from the router shelf."
::= { ciscoHealthMonCountEntry 6 }
ciscoHealthMonModemsInUse OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of modems on a shelf that are in the
following states: connected, offHook, loopback, or
downloadFirmware. This the polled value for cmSystemModemsInUse from
the router shelf."
::= { ciscoHealthMonCountEntry 7 }
ciscoHealthMonUnavailableModems OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of modems on a shelf that cannot accept the
calls. They are in the following states: unknown, onHook, busiedOut,
disabled, bad, or downloadFirmwareFailed. This is the polled value for
cmSystemModemsUnavailable from the router shelf."
::= { ciscoHealthMonCountEntry 8 }
ciscoHealthMonIOMemUsed OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes of IO memory that are currently
in use by the applications on the shelf. This is the polled value for
ciscoMemoryPoolUsed of io-mem type on the router shelf."
::= { ciscoHealthMonCountEntry 9 }
ciscoHealthMonIOMemFree OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes of IO memory that are currently
available to use on the shelf.This is the polled value for
ciscoMemoryPoolFree of io-mem type on the router shelf."
::= { ciscoHealthMonCountEntry 10 }
ciscoHealthMonCPUavgBusy5 OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"5 minute exponentially-decayed moving average of the
CPU busy percentage. This is the polled value for avgBusy5 from the
router shelf."
::= { ciscoHealthMonCountEntry 11 }
ciscoHealthMonUtilEgressInOctet OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the percentage utilization of total number of
octets received on all the active egress interface, including framing
characters.
A port is considered as an egress port if it's ifSpeed > 1544000
% Utilization of ifInOctets = (diff_total_ifInoctets*100)/
(time in seconds * total_speed)
."
::= { ciscoHealthMonCountEntry 12 }
ciscoHealthMonUtilEgressOutOctet OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the percentage utilization of the total
number of octets transmitted out on all the active egress interface,
including framing characters.
A port is considered as an egress port if it's ifSpeed > 1544000
% Utilization of ifOutOctets = (diff_total_ifOutoctets*100)/
(time in seconds * total_speed)
."
::= { ciscoHealthMonCountEntry 13 }
ciscoHealthMonShelfLastUpdate OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the last time at which the system-controller
has polled the mib entries from a shelf. However, if system-controller
can not talk to that shelf, this entry will have the same time as the
last update and a string Lost Contact. All the mib entries
corresponding to this shelf will remain as it is until
system-controller can talk to this shelf again."
::= { ciscoHealthMonCountEntry 14 }
ciscoHealthMonMIBNotificationEnables OBJECT IDENTIFIER ::= { cisco5800HealthMonMIB 2 }
ciscoHealthMonEnableNotification OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates whether the system produces
the ciscoHealthNotification. A false value will prevent notifications
from being generated by this system."
DEFVAL { false }
::= { ciscoHealthMonMIBNotificationEnables 1 }
-- the following two OBJECT IDENTIFIERS are used to define SNMPv2 Notifications
-- that are backward compatible with SNMPv1 Traps.
ciscoHealthMonMIBNotificationPrefix OBJECT IDENTIFIER ::= { cisco5800HealthMonMIB 3 }
ciscoHealthMonMIBNotifications OBJECT IDENTIFIER ::= { ciscoHealthMonMIBNotificationPrefix 0 }
ciscoHealthMonNotification NOTIFICATION-TYPE
OBJECTS {
ciscoHealthMonStatusType,
ciscoHealthMonShelfId,
ciscoHealthMonAddress,
ciscoHealthMonDescr,
ciscoHealthMonValue,
ciscoHealthMonThreshold
}
STATUS current
DESCRIPTION
"A ciscoHealthMonNotification is sent if the measured
utilization has crossed the threshold value. It will be generated
when the value rises above the threshold. ciscoHealthMonShelfId and
ciscoHealthMonAddress are optional entries. This entry is valid only
if the notification generated for the monitoring types set on the
router shelf. This entry will not have anything if notification is
generated for the monitoring types set on the system controller."
::= { ciscoHealthMonMIBNotifications 1 }
-- conformance information
cisco5800HealthMonMIBConformance OBJECT IDENTIFIER ::= { cisco5800HealthMonMIB 4 }
cisco5800HealthMonMIBCompliances OBJECT IDENTIFIER ::= { cisco5800HealthMonMIBConformance 1 }
cisco5800HealthMonMIBGroups OBJECT IDENTIFIER ::= { cisco5800HealthMonMIBConformance 2 }
-- compliance statements
cisco5800HealthMonMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the Cisco Health Monitor MIB"
MODULE -- this module
MANDATORY-GROUPS { cisco5800HealthMonMIBGroup }
::= { cisco5800HealthMonMIBCompliances 1 }
-- units of conformance
cisco5800HealthMonMIBGroup OBJECT-GROUP
OBJECTS {
ciscoHealthMonStatusType,
ciscoHealthMonShelfId,
ciscoHealthMonAddress,
ciscoHealthMonDescr,
ciscoHealthMonValue,
ciscoHealthMonThreshold,
ciscoHealthMonThresholdExceedCount,
ciscoHealthMonT1E1LinesUp,
ciscoHealthMonT1E1LinesDown,
ciscoHealthMonActiveDS0,
ciscoHealthMonTotalDS0,
ciscoHealthMonTotalModems,
ciscoHealthMonModemsInUse,
ciscoHealthMonUnavailableModems,
ciscoHealthMonIOMemUsed,
ciscoHealthMonIOMemFree,
ciscoHealthMonCPUavgBusy5,
ciscoHealthMonUtilEgressInOctet,
ciscoHealthMonUtilEgressOutOctet,
ciscoHealthMonShelfLastUpdate,
ciscoHealthMonNumShelves,
ciscoHealthMonNumT1E1LinesUp,
ciscoHealthMonNumT1E1LinesDown,
ciscoHealthMonNumActiveDS0,
ciscoHealthMonNumTotalDS0,
ciscoHealthMonNumTotalModems,
ciscoHealthMonNumModemsInUse,
ciscoHealthMonNumUnavailableModems,
ciscoHealthMonEnableNotification
}
STATUS current
DESCRIPTION
"A collection of objects providing health monitoring
capability to a cisco chassis."
::= { cisco5800HealthMonMIBGroups 1 }
END

1459
snmp_mib_archive/CISCO-6400-CHASSIS-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

345
snmp_mib_archive/CISCO-802-TAP-MIB.my 2
View File

@ -1,345 +0,0 @@
-- *****************************************************************
-- CISCO-802-TAP-MIB.my: Cisco intercept ("tap") MIB
--
-- September 2003, Srinivas Dhulipala
--
-- Copyright (c) 2003-2006 by Cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
--
CISCO-802-TAP-MIB DEFINITIONS ::= BEGIN
IMPORTS
Integer32,
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
MacAddress,
RowStatus
FROM SNMPv2-TC
cTap2MediationContentId,
cTap2StreamIndex
FROM CISCO-TAP2-MIB
ciscoMgmt
FROM CISCO-SMI;
cisco802TapMIB MODULE-IDENTITY
LAST-UPDATED "200403110000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal:170 W. Tasman Drive
San Jose, CA 95134
USA
Tel:+1 800 553-NETS
E-mail:cs-li@cisco.com"
DESCRIPTION
"This module manages Cisco's intercept feature for
802 (layer 2) streams.
This MIB is used along with CISCO-TAP2-MIB to
intercept 802 traffic. CISCO-TAP2-MIB along with
specific filter MIBs like this MIB replace
CISCO-TAP-MIB.
To create an 802 intercept, an entry c802tapStreamEntry
is created which contains the filter details. An entry
cTap2StreamEntry of CISCO-TAP2-MIB is created which
is the common stream information for all kinds of
intercepts and type of the specific stream is set to
mac in this entry."
REVISION "200403110000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 395 }
cisco802TapMIBNotifs OBJECT IDENTIFIER ::= { cisco802TapMIB 0 }
cisco802TapMIBObjects OBJECT IDENTIFIER ::= { cisco802TapMIB 1 }
cisco802TapMIBConform OBJECT IDENTIFIER ::= { cisco802TapMIB 2 }
c802tapStreamEncodePacket OBJECT IDENTIFIER ::= { cisco802TapMIBObjects
1 }
--
-- The filter specifics for intercepting 802 traffic.
--
c802tapStreamCapabilities OBJECT-TYPE
SYNTAX BITS {
tapEnable(0),
interface(1),
dstMacAddr(2),
srcMacAddr(3),
ethernetPid(4),
dstLlcSap(5),
srcLlcSap(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays what types of intercept streams can be
configured on this type of device. This may be dependent on
hardware capabilities, software capabilities. The following
fields may be supported:
tapEnable: set if table entries with
cTap2StreamInterceptEnable set to 'false'
are used to pre-screen packets for intercept;
otherwise these entries are ignored.
interface: SNMP ifIndex Value may be used to select
interception of all data crossing an
interface or set of interfaces.
dstMacAddr: Destination MAC Address may be used to select
traffic to be intercepted.
srcMacAddr: Source MAC Address may be used to select
traffic to be intercepted.
ethernetPid: Ethernet Protocol Identifier may be used to
select traffic to be intercepted.
dstLlcSap: IEEE 802.2 Destination SAP may be used to
select traffic to be intercepted.
srcLlcSap: IEEE 802.2 Source SAP may be used to select
traffic to be intercepted."
::= { c802tapStreamEncodePacket 1 }
--
-- The "access list" for intercepting data at the IEEE 802
-- link layer
--
c802tapStreamTable OBJECT-TYPE
SYNTAX SEQUENCE OF C802tapStreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Intercept Stream 802 Table lists the IEEE 802 data streams
to be intercepted. The same data stream may be required by
multiple taps, and one might assume that often the intercepted
stream is a small subset of the traffic that could be
intercepted.
This essentially provides options for packet selection, only
some of which might be used. For example, if all traffic to or
from a given interface is to be intercepted, one would
configure an entry which lists the interface, and wild-card
everything else. If all traffic to or from a given MAC Address
is to be intercepted, one would configure two such entries
listing the MAC Address as source and destination respectively,
and wild-card everything else.
The first index indicates which Mediation Device the
intercepted traffic will be diverted to. The second index
permits multiple classifiers to be used together, such as
having a MAC address as source or destination.
Entries are added to this table via c802tapStreamStatus in
accordance with the RowStatus convention."
::= { c802tapStreamEncodePacket 2 }
c802tapStreamEntry OBJECT-TYPE
SYNTAX C802tapStreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A stream entry indicates a single data stream to be
intercepted to a Mediation Device. Many selected data
streams may go to the same application interface, and many
application interfaces are supported."
INDEX { cTap2MediationContentId, cTap2StreamIndex }
::= { c802tapStreamTable 1 }
C802tapStreamEntry ::= SEQUENCE {
c802tapStreamFields BITS,
c802tapStreamInterface Integer32,
c802tapStreamDestinationAddress MacAddress,
c802tapStreamSourceAddress MacAddress,
c802tapStreamEthernetPid Unsigned32,
c802tapStreamSourceLlcSap Unsigned32,
c802tapStreamDestinationLlcSap Unsigned32,
c802tapStreamStatus RowStatus
}
c802tapStreamFields OBJECT-TYPE
SYNTAX BITS {
interface(0),
dstMacAddress(1),
srcMacAddress(2),
ethernetPid(3),
dstLlcSap(4),
srcLlcSap(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object displays what attributes must be tested to
identify traffic which requires interception. The packet
matches if all flagged fields match.
interface: indicates that traffic on the stated
interface is to be intercepted
dstMacAddress: indicates that traffic destined to a
given address should be intercepted
srcMacAddress: indicates that traffic sourced from a
given address should be intercepted
ethernetPid: indicates that traffic with a stated
Ethernet Protocol Identifier should be
intercepted
dstLlcSap: indicates that traffic with an certain
802.2 LLC Destination SAP should be
intercepted
srcLlcSap: indicates that traffic with an certain
802.2 LLC Source SAP should be
intercepted
At least one of the bits has to be set in order to activate an
entry. If the bit is not on, the corresponding MIB object
value has no effect, and need not be specified when creating
the entry."
::= { c802tapStreamEntry 1 }
c802tapStreamInterface OBJECT-TYPE
SYNTAX Integer32 (-1 | 0 | 1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ifIndex value of the interface over which traffic to be
intercepted is received or transmitted. The interface may be
physical or virtual. If this is the only parameter specified,
and it is other than -1 or 0, all traffic on the selected
interface will be chosen.
If the value is zero, matching traffic may be received or
transmitted on any interface. Additional selection parameters
must be selected to limit the scope of traffic intercepted.
This is most useful on non-routing platforms or on intercepts
placed elsewhere than a subscriber interface.
If the value is -1, one or both of
c802tapStreamDestinationAddress and c802tapStreamSourceAddress
must be specified. Matching traffic on the interface pointed
to by the dot1dTpFdbPort values associated with those values is
intercepted, whichever is specified. If dot1dTpFdbPort
changes, either by operator action or by protocol events, the
interface will change with it. This is primarily intended for
use on subscriber interfaces and other places where routing is
guaranteed to be symmetrical.
In both of these cases, it is possible to have the same packet
selected for intersection on both its ingress and egress
interface. Nonetheless, only one instance of the packet is
sent to the Mediation Device.
This value must be set when creating a stream entry, either to
select an interface, to select all interfaces, or to select the
interface that bridging learns. Some platforms may not
implement the entire range of options."
REFERENCE "RFC 1493"
::= { c802tapStreamEntry 2 }
c802tapStreamDestinationAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Destination address used in packet selection."
::= { c802tapStreamEntry 3 }
c802tapStreamSourceAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Source Address used in packet selection."
::= { c802tapStreamEntry 4 }
c802tapStreamEthernetPid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the Ethernet Protocol Identifier, which may be
found on Ethernet traffic or IEEE 802.2 SNAP traffic."
::= { c802tapStreamEntry 5 }
c802tapStreamDestinationLlcSap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the IEEE 802.2 Destination SAP."
::= { c802tapStreamEntry 6 }
c802tapStreamSourceLlcSap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the IEEE 802.2 Source SAP."
::= { c802tapStreamEntry 7 }
c802tapStreamStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. This object manages
creation, modification, and deletion of rows in this table.
When any rows must be changed, c802tapStreamStatus must
be first set to 'notInService'."
::= { c802tapStreamEntry 8 }
-- conformance information
cisco802TapMIBCompliances OBJECT IDENTIFIER ::= { cisco802TapMIBConform
1 }
cisco802TapMIBGroups OBJECT IDENTIFIER ::= { cisco802TapMIBConform
2 }
-- compliance statement
cisco802TapMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
Cisco Intercept MIB for 802 streams."
MODULE -- this module
MANDATORY-GROUPS {
cisco802TapStreamGroup
}
::= {cisco802TapMIBCompliances 1 }
-- units of conformance
cisco802TapStreamGroup OBJECT-GROUP
OBJECTS {
c802tapStreamCapabilities,
c802tapStreamFields,
c802tapStreamInterface,
c802tapStreamDestinationAddress,
c802tapStreamSourceAddress,
c802tapStreamEthernetPid,
c802tapStreamSourceLlcSap,
c802tapStreamDestinationLlcSap,
c802tapStreamStatus
}
STATUS current
DESCRIPTION
"These objects are necessary for a description of IEEE 802
packets to select for interception."
::= { cisco802TapMIBGroups 1 }
END

2361
snmp_mib_archive/CISCO-90-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

74
snmp_mib_archive/CISCO-AAA-CLIENT-CAPABILITY.my 2
View File

@ -1,74 +0,0 @@
-- *****************************************************************
-- CISCO-AAA-CLIENT-CAPABILITY.my:
-- Cisco CISCO-AAA-CLIENT-MIB AGENT-CAPABILITIES
--
-- Aug 2003, Jayakumar Kadirvelu
--
-- Copyright (c) 2003-2004 by Cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-AAA-CLIENT-CAPABILITY DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY
FROM SNMPv2-SMI
AGENT-CAPABILITIES
FROM SNMPv2-CONF
TruthValue
FROM SNMPv2-TC
ciscoAgentCapability
FROM CISCO-SMI;
ciscoAaaClientCapability MODULE-IDENTITY
LAST-UPDATED "200402030000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 West Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-lan-switch-snmp@cisco.com"
DESCRIPTION
"The capabilities description of CISCO-AAA-CLIENT-MIB."
REVISION "200402030000Z"
DESCRIPTION
"Added VARIATION for cacEnable and cacPrimaryMethod."
REVISION "200308060000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoAgentCapability 322 }
ciscoAaaClientCapCatOSV08R0101 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.1(1) on Catalyst 6000/6500
and Cisco 7600 series devices."
STATUS current
DESCRIPTION "CISCO-AAA-CLIENT-MIB capabilities."
SUPPORTS CISCO-AAA-CLIENT-MIB
INCLUDES { cacPriorityGroup,
cacLoginConfigGroup,
cacLoginConfigGroupRev1
}
VARIATION cacEnable
SYNTAX TruthValue
DESCRIPTION "Cannot be set to false(2), when the value
of cacAuthen is local(4), and the value of
cacPrimaryMethod is true(1)."
VARIATION cacPrimaryMethod
SYNTAX TruthValue
DESCRIPTION "Cannot be set to false(2)."
::= { ciscoAaaClientCapability 1 }
END

491
snmp_mib_archive/CISCO-AAA-CLIENT-MIB.my 2
View File

@ -1,491 +0,0 @@
-- *****************************************************************
-- CISCO-AAA-CLIENT-MIB.my: Cisco AAA Client MIB
--
-- February 2000, Edward Pham
-- May 2001, Liwei Lue
-- October 2001, Jayakumar Kadirvelu
--
-- Copyright (c) 2000-2001 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
CISCO-AAA-CLIENT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
TruthValue
FROM SNMPv2-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoAAAClientMIB MODULE-IDENTITY
LAST-UPDATED "200111190000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-aaa@cisco.com"
DESCRIPTION
"This MIB module provides data for authentication method
priority based on Authentication, Authorization,
Accounting (AAA) protocols.
References:
The TACACS+ Protocol Version 1.78, Internet Draft
RFC 1411 Telnet Authentication: Kerberos Version 4.
RFC 1964 The Kerberos Version 5 GSS-API Mechanism.
"
REVISION "200111190000Z"
DESCRIPTION
"Deprecate object cacLockoutPeriod and add a new object
cacLockoutPeriodExt.
"
REVISION "200105100000Z"
DESCRIPTION
"Initial version
"
::= { ciscoMgmt 158 }
--
-- Textual Conventions
--
--
-- Session Type textual convention
--
SessionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a session type.
telnet(1) indicates telnet session.
console(2) indicates console session.
http(3) indicates http session.
"
SYNTAX INTEGER {
telnet (1),
console (2),
http (3)
}
--
-- Authentication method textual convention
--
AuthenMethod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents authentication method.
tacacs(1) indicates that TACACS method is used for
authentication.
radius(2) indicates that RADIUS method is used for
authentication.
kerberos(3) indicates that KERBEROS method is used
for authentication.
local(4) indicates that local password is used
for authentication. Which password is used depend
on what login mode users specified.
"
SYNTAX INTEGER {
tacacs (1),
radius (2),
kerberos (3),
local (4)
}
--
-- Login Mode textual convention
--
LoginMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents login mode.
login(1) indicates the normal mode.
enable(2) indicates the privileged mode.
"
SYNTAX INTEGER {
login (1),
enable (2)
}
-- AAA Client MIB objects definitions
cacMIBObjects OBJECT IDENTIFIER ::= { ciscoAAAClientMIB 1 }
-- The AAA Client MIB consists of the following groups
-- [1] AAA Client Priority Group (cacPriority)
-- [2] AAA Client Login Config Group (cacLoginConfig)
cacPriority OBJECT IDENTIFIER ::= { cacMIBObjects 1 }
cacLoginConfig OBJECT IDENTIFIER ::= { cacMIBObjects 2 }
--****************************************************************************
-- AAA Client Priority Group
--****************************************************************************
--
--
--
-- Priority Table
--
cacPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF CacPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains entries for AAA authentication
methods configured in the system. At startup, agent
set up all the entries of the table. All authentication
methods will be disabled except local authentication will
be enabled for each session type and login mode. Users
later can enable/disable a specific authentication method
through cacEnable object.
The following table describes the startup state of each
authentication method and session type in normal login
mode and enable login mode.
AuthenMethod Console Session Telnet Session Http Session
------------ ---------------- ---------------- ------------
tacacs disabled disabled disabled
radius disabled disabled disabled
kerberos disabled disabled disabled
local enabled(*) enabled(*) enabled(*)
(*) denotes primary method.
"
::= { cacPriority 1 }
cacPriorityEntry OBJECT-TYPE
SYNTAX CacPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the priority number of an authentication
method used in a session.
"
INDEX { cacSession, cacAuthen, cacLoginMode }
::= { cacPriorityTable 1 }
CacPriorityEntry ::=
SEQUENCE {
cacSession SessionType,
cacAuthen AuthenMethod,
cacLoginMode LoginMode,
cacEnable TruthValue,
cacPriorityNumber Integer32,
cacPrimaryMethod TruthValue
}
cacSession OBJECT-TYPE
SYNTAX SessionType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the session type used to connect to the network
device.
"
::= { cacPriorityEntry 1 }
cacAuthen OBJECT-TYPE
SYNTAX AuthenMethod
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the authentication method used to authenticate
users.
"
::= { cacPriorityEntry 2 }
cacLoginMode OBJECT-TYPE
SYNTAX LoginMode
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the login mode user used to login to the network
device.
"
::= { cacPriorityEntry 3 }
cacEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It indicates whether the authentication method denoted by
cacAuthen is enabled or not.
When this object is true(1), the authentication method denoted
by cacAuthen is enabled.
When this object is false(2), the authentication method denoted
by cacAuthen is disabled.
If the value of cacAuthen is local, the value of this
object cannot be set to false(2).
"
::= { cacPriorityEntry 4 }
cacPriorityNumber OBJECT-TYPE
SYNTAX Integer32 (0..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the priority number of an authentication method to
be used in user authentication for a session. This value is
automatically assigned and reflects the relative priority
of the authentication method denoted by cacAuthen with
respected to already configured authentication methods.
It is assigned in the order in which the authentication
method is enabled by the user through cacEnable.
The higher value has the higher priority. This object
is used to determine the fallback order in case the
primary authentication method indicated by cacPrimaryMethod
failed.
If the authentication method denoted by cacAuthen is disabled
for the type of session denoted by cacSession, the value
of this object is equal to 0.
"
::= { cacPriorityEntry 5 }
cacPrimaryMethod OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It indicates whether the authentication method denoted by
cacAuthen is the primary (first one to be tried) method
when there are multiple authentication method configured.
Setting this object to true(1) will make the authentication
method denoted by cacAuthen to be the primary authentication
method for the session denoted by cacSession. The previously
configured primary method will be changed to false(2).
Setting this object to false(2) is not allowed.
"
::= { cacPriorityEntry 6 }
-- -------------------------------------------------------------
-- AAA Client Login Config Group
-- -------------------------------------------------------------
cacLoginConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CacLoginConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains login configuration
which is associated with this system.
"
::= { cacLoginConfig 1 }
cacLoginConfigEntry OBJECT-TYPE
SYNTAX CacLoginConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the configuration of the login.
"
INDEX { cacLoginMode, cacSession }
::= { cacLoginConfigTable 1 }
CacLoginConfigEntry ::=
SEQUENCE {
cacMaxLoginAttempt Integer32,
cacLockoutPeriod Integer32,
cacLockoutPeriodExt Integer32
}
cacMaxLoginAttempt OBJECT-TYPE
SYNTAX Integer32 (0|3..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum number of login attempts allowed.
Setting this variable to 0 will disable the attempt
limit checking.
If the login session type does not support this attempt
limit checking, the value of this object can only be set
to 0.
"
DEFVAL { 3 }
::= { cacLoginConfigEntry 1 }
cacLockoutPeriod OBJECT-TYPE
SYNTAX Integer32 (0|30..600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Indicates the lockout period after the maximum number
of login attempt is met. For console, the console input
will be frozen during this period. For remote logins, the
connection will be closed and any subsequent access
from that station will be closed during the lockout time.
Setting this variable to 0 will disable the lockout.
If the login session type does not support this lockout
period, the value of this object can only be set to 0.
If the lockout period is greater than the maximum value
reportable by this object then this object should report
its maximum value (600) and cacLockoutPeriodExt must be
used to report the lockout period.
"
DEFVAL { 30 }
::= { cacLoginConfigEntry 2 }
cacLockoutPeriodExt OBJECT-TYPE
SYNTAX Integer32 (0|30..43200)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the lockout period after the maximum number
of login attempt is met. For console, the console input
will be frozen during this period. For remote logins, the
connection will be closed and any subsequent access
from that station will be closed during the lockout time.
Setting this variable to 0 will disable the lockout.
If the login session type does not support this lockout
period, the value of this object can only be set to 0.
"
DEFVAL { 30 }
::= { cacLoginConfigEntry 3 }
--****************************************************************************
-- Notifications
--****************************************************************************
cacMIBNotifications OBJECT IDENTIFIER ::= { ciscoAAAClientMIB 2 }
cacMIBConformance OBJECT IDENTIFIER ::=
{ ciscoAAAClientMIB 3 }
cacMIBCompliances OBJECT IDENTIFIER ::=
{ cacMIBConformance 1 }
cacMIBGroups OBJECT IDENTIFIER ::=
{ cacMIBConformance 2 }
-- compliance statements
cacMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO AAA Client MIB"
MODULE -- this module
MANDATORY-GROUPS
{
cacPriorityGroup,
cacLoginConfigGroup
}
::= { cacMIBCompliances 1 }
cacMIBCompliance2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the CISCO AAA Client MIB"
MODULE -- this module
MANDATORY-GROUPS
{
cacPriorityGroup,
cacLoginConfigGroupRev1
}
::= { cacMIBCompliances 2 }
-- units of conformance
cacPriorityGroup OBJECT-GROUP
OBJECTS {
cacEnable,
cacPriorityNumber,
cacPrimaryMethod
}
STATUS current
DESCRIPTION
"A collection of objects providing the
AAA client priority information.
"
::= { cacMIBGroups 1 }
cacLoginConfigGroup OBJECT-GROUP
OBJECTS {
cacMaxLoginAttempt,
cacLockoutPeriod
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the
AAA client login configuration.
"
::= { cacMIBGroups 2 }
cacLoginConfigGroupRev1 OBJECT-GROUP
OBJECTS {
cacMaxLoginAttempt,
cacLockoutPeriodExt
}
STATUS current
DESCRIPTION
"A collection of objects providing the
AAA client login configuration.
"
::= { cacMIBGroups 3 }
END

266
snmp_mib_archive/CISCO-AAA-SERVER-CAPABILITY.my 2
View File

@ -1,266 +0,0 @@
-- *****************************************************************
-- CISCO-AAA-SERVER-CAPABILITY.my: Cisco AAA Server MIB AGENT-CAPABILITIES
--
-- November, 2003 - Mark W. Eklund, Sanjeev C Joshi
--
-- Copyright (c) 2000, 2003, 2008 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-AAA-SERVER-CAPABILITY DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY
FROM SNMPv2-SMI
AGENT-CAPABILITIES
FROM SNMPv2-CONF
ciscoAgentCapability
FROM CISCO-SMI;
ciscoAAAServerCapability MODULE-IDENTITY
LAST-UPDATED "200807210000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-aaa@cisco.com"
DESCRIPTION
"Agent capabilities for CISCO-AAA-SERVER-MIB"
REVISION "200807210000Z"
DESCRIPTION
"Added VARIATION for casKey object in
ciscoAAAServerCapabilityACSWV03R000 agent capability.
Added Agent capabilities ciscoAAAServerCapc4710aceVA1R70 for
ACE 4710 Application Control Engine Appliance."
REVISION "200602210000Z"
DESCRIPTION
"Agent capabilities for Application
Control Engine (ACE)."
REVISION "200311140000Z"
DESCRIPTION
"Agent capabilities for Cisco MDS 1.3."
REVISION "200001200000Z"
DESCRIPTION
"Initial version of this MIB."
::= { ciscoAgentCapability 129 }
ciscoAAAServerCapabilityV10R00 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco IOS 12.0(4)XJ"
STATUS current
DESCRIPTION
"Cisco AAA Server MIB capabilities"
SUPPORTS CISCO-AAA-SERVER-MIB
INCLUDES {
casStatisticsGroup,
casConfigGroup,
casServerNotificationGroup
}
VARIATION casConfigEntry
CREATION-REQUIRES { casAddress }
DESCRIPTION
"The address must be specified during
creation"
VARIATION casAddress
ACCESS read-only
DESCRIPTION
"create is not yet supported"
VARIATION casAuthenPort
ACCESS read-only
DESCRIPTION
"create is not yet supported"
VARIATION casAcctPort
ACCESS read-only
DESCRIPTION
"create is not yet supported"
VARIATION casKey
ACCESS read-only
DESCRIPTION
"create is not yet supported"
VARIATION casConfigRowStatus
ACCESS read-only
DESCRIPTION
"create is not yet supported"
::= { ciscoAAAServerCapability 1 }
ciscoAAAServerCapabilityMDS13R1 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco MDS 1.3(1)"
STATUS current
DESCRIPTION
"Cisco AAA Server MIB capabilities"
SUPPORTS CISCO-AAA-SERVER-MIB
INCLUDES { casConfigGroup }
VARIATION casServerStateChangeEnable
ACCESS not-implemented
DESCRIPTION
"Not Supported."
VARIATION casAuthenPort
DEFVAL { 1812 }
DESCRIPTION
"As per the IANA port assignments,
DEFVAL is 1812 for radius server and
DEFVAL is 49 for tacacs+ server."
VARIATION casAcctPort
DEFVAL { 1813 }
DESCRIPTION
"As per the IANA port assignments,
DEFVAL is 1813 for radius server.
The value is ignored for tacacs+
server."
VARIATION casPriority
ACCESS not-implemented
DESCRIPTION
"Not relevant in MDS implementation."
VARIATION casConfigRowStatus
DESCRIPTION
"Only allowed values are :
- 'createAndGo'
- 'destroy'
- 'active'
."
VARIATION casProtocol
DESCRIPTION
"The supported protcols are;
- tacacsplus(1) - TACACS+
- radius(2) - RADIUS
."
::= { ciscoAAAServerCapability 2 }
ciscoAAAServerCapabilityACSWV03R000 AGENT-CAPABILITIES
PRODUCT-RELEASE "ACSW (Application Control Software) 3.0"
STATUS current
DESCRIPTION
"Cisco AAA Server MIB capabilities
for ACSW 3.0"
SUPPORTS CISCO-AAA-SERVER-MIB
INCLUDES { casConfigGroup }
VARIATION casServerStateChangeEnable
ACCESS read-only
DESCRIPTION
"Create operation not supported"
VARIATION casAddress
ACCESS read-only
DESCRIPTION
"Create operation not supported"
VARIATION casAuthenPort
ACCESS read-only
DEFVAL { 1812 }
DESCRIPTION
"As per the IANA port assignments,
DEFVAL is 1812 for radius server and
DEFVAL is 49 for tacacs+ server.
Create operation not supported"
VARIATION casAcctPort
ACCESS read-only
DEFVAL { 1813 }
DESCRIPTION
"As per the IANA port assignments,
DEFVAL is 1813 for radius server.
The value is ignored for tacacs+
server.
Create operation not supported."
VARIATION casKey
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION casPriority
ACCESS not-implemented
DESCRIPTION
"Not supported."
VARIATION casConfigRowStatus
ACCESS read-only
DESCRIPTION
"Create operation not supported"
::= { ciscoAAAServerCapability 3 }
ciscoAAAServerCapc4710aceVA1R70 AGENT-CAPABILITIES
PRODUCT-RELEASE "ACSW (Application Control Software) A1(7)
for ACE 4710 Application Control Engine
Appliance."
STATUS current
DESCRIPTION
"Cisco AAA Server MIB capabilities
for ACSW A1(7)"
SUPPORTS CISCO-AAA-SERVER-MIB
INCLUDES { casConfigGroup }
VARIATION casServerStateChangeEnable
ACCESS read-only
DESCRIPTION
"Create operation not supported"
VARIATION casAddress
ACCESS read-only
DESCRIPTION
"Create operation not supported"
VARIATION casAuthenPort
ACCESS read-only
DEFVAL { 1812 }
DESCRIPTION
"As per the IANA port assignments,
DEFVAL is 1812 for radius server and
DEFVAL is 49 for tacacs+ server.
Create operation not supported"
VARIATION casAcctPort
ACCESS read-only
DEFVAL { 1813 }
DESCRIPTION
"As per the IANA port assignments,
DEFVAL is 1813 for radius server.
The value is ignored for tacacs+
server.
Create operation not supported."
VARIATION casKey
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION casPriority
ACCESS not-implemented
DESCRIPTION
"Not supported."
VARIATION casConfigRowStatus
ACCESS read-only
DESCRIPTION
"Create operation not supported"
::= { ciscoAAAServerCapability 4 }
END

612
snmp_mib_archive/CISCO-AAA-SERVER-EXT-CAPABILITY.my 2
View File

@ -1,612 +0,0 @@
-- *****************************************************************
-- CISCO-AAA-SERVER-EXT-CAPABILITY-MIB.my: Cisco AAA Server Ext MIB
-- AGENT-CAPABILITIES
--
-- November 2003, Sanjeev C Joshi
--
-- Copyright (c) 2003, 2004, 2006, 2008 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-AAA-SERVER-EXT-CAPABILITY DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
Unsigned32
FROM SNMPv2-SMI
AGENT-CAPABILITIES
FROM SNMPv2-CONF
TimeIntervalSec
FROM CISCO-TC
ciscoAgentCapability
FROM CISCO-SMI;
ciscoAAAServerExtCapability MODULE-IDENTITY
LAST-UPDATED "200806160000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-aaa@cisco.com"
DESCRIPTION
"Agent capabilities for CISCO-AAA-SERVER-EXT-MIB"
REVISION "200806160000Z"
DESCRIPTION
"Agent capabilities for Cisco ACE 4710 Application
Control Engine Appliance."
REVISION "200602210000Z"
DESCRIPTION
"Agent capabilities for Cisco
Application Control Engine (ACE)."
REVISION "200408240000Z"
DESCRIPTION
"Agent capabilities for Cisco MDS 2.0."
REVISION "200311220000Z"
DESCRIPTION
"Agent capabilities for Cisco MDS 1.3."
::= { ciscoAgentCapability 372 }
ciscoAAAServerExtCapMDS13R1 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco MDS 1.3(1)"
STATUS current
DESCRIPTION
"Cisco AAA Server MIB capabilities"
SUPPORTS CISCO-AAA-SERVER-EXT-MIB
INCLUDES {
cAAASvrExtGenericConfGroup,
cAAASvrExtSvrTableConfGroup,
cAAASvrExtProtoParamConfigGroup,
cAAASvrExtSvrGroupConfGroup,
cAAASvrExtAppSvrGroupConfGroup
}
VARIATION cAAASvrExtLocalAccLogMaxSize
SYNTAX Unsigned32 (0..35000)
DESCRIPTION
"Only the range 0-35000 is supported with
default of 15000."
VARIATION cAAAServerDeadTime
ACCESS not-implemented
DESCRIPTION
"Not supported."
VARIATION cAAAServerTimeOut
SYNTAX TimeIntervalSec (0..60)
DESCRIPTION
"Only the range 0-60 is supported.
The value of this object is not currently
used for radius in the implementation and
hence ignored for radius server entries."
VARIATION cAAAServerRetransmits
ACCESS not-implemented
DESCRIPTION
"Not supported."
VARIATION cAAAServerProtoDeadTime
ACCESS not-implemented
DESCRIPTION
"Not supported."
VARIATION cAAAServerProtoTimeOut
SYNTAX TimeIntervalSec (1..60)
DESCRIPTION
"Only the range 1-60 is supported."
VARIATION cAAAServerProtoRetransmits
SYNTAX Unsigned32 (0..5)
DESCRIPTION
"Only the range of 0-5 is supported. The object
is not relevant for tacacs+ servers and hence
the value is ignored."
VARIATION cAAASvrExtSvrGrpConfigEntry
DESCRIPTION
"There is a special agent defined group with
'cAAASvrGrpIndex' as 1, 'cAAASvrGrpName' as
'radius' and 'cAAASvrGrpProtocol' as 'radius'.
Whenever this group is used by any aplication
in the system for any of the AAA functions,
then the value of corresponding instance of
'cAAAServerList' is updated with all the AAA
server entries in the agent. This group entry
can not be deleted by the user."
VARIATION cAAAServerProtocol
DESCRIPTION
"The supported protcols are;
- tacacsplus(1) - TACACS+
- radius(2) - RADIUS
."
VARIATION cAAASvrGrpConfigRowStatus
DESCRIPTION
"Only allowed values are :
- createAndGo(4)
- destroy(6)
- active(1)
."
VARIATION cAAASvrGrpProtocol
DESCRIPTION
"The supported protcols are;
- tacacsplus(1) - TACACS+
- radius(2) - RADIUS
."
::= { ciscoAAAServerExtCapability 1 }
ciscoAAAServerExtCapMDS20R1 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco MDS 2.0(1)"
STATUS current
DESCRIPTION
"Cisco AAA Server MIB capabilities"
SUPPORTS CISCO-AAA-SERVER-EXT-MIB
INCLUDES {
cAAASvrExtGenericConfGroup,
cAAASvrExtSvrTableConfGroup,
cAAASvrExtProtoParamConfigGroup,
cAAASvrExtSvrGroupConfGroup,
cAAASvrExtAppSvrGroupConfGroup
}
VARIATION cAAASvrExtLocalAccLogMaxSize
ACCESS not-implemented
DESCRIPTION
"Not supported."
VARIATION cAAAServerDeadTime
ACCESS not-implemented
DESCRIPTION
"Not supported."
VARIATION cAAAServerTimeOut
SYNTAX TimeIntervalSec (0..60)
DESCRIPTION
"Only the range 0-60 is supported."
VARIATION cAAAServerRetransmits
SYNTAX Unsigned32 (0..5)
DESCRIPTION
"Only the range of 0-5 is supported. The object
is not relevant for tacacs+ servers and hence
the value is ignored."
VARIATION cAAAServerProtoDeadTime
ACCESS not-implemented
DESCRIPTION
"Not supported."
VARIATION cAAAServerProtoTimeOut
SYNTAX TimeIntervalSec (1..60)
DESCRIPTION
"Only the range 1-60 is supported."
VARIATION cAAAServerProtoRetransmits
SYNTAX Unsigned32 (0..5)
DESCRIPTION
"Only the range of 0-5 is supported. The object
is not relevant for tacacs+ servers and hence
the value is ignored."
VARIATION cAAASvrExtSvrGrpConfigEntry
DESCRIPTION
"There is a special agent defined group with
'cAAASvrGrpIndex' as 1, 'cAAASvrGrpName' as
'radius' and 'cAAASvrGrpProtocol' as 'radius'.
Whenever this group is used by any application
in the system for any of the AAA functions,
then the value of corresponding instance of
'cAAAServerList' is updated with all the AAA
server entries in the agent. This group entry
can not be deleted by the user."
VARIATION cAAAServerProtocol
DESCRIPTION
"The supported protcols are;
- tacacsplus(1) - TACACS+
- radius(2) - RADIUS
."
VARIATION cAAASvrGrpConfigRowStatus
DESCRIPTION
"Only allowed values are :
- createAndGo(4)
- destroy(6)
- active(1)
."
VARIATION cAAASvrGrpProtocol
DESCRIPTION
"The supported protcols are;
- tacacsplus(1) - TACACS+
- radius(2) - RADIUS
."
::= { ciscoAAAServerExtCapability 2 }
ciscoAAAServerExtCapACSWV03R000 AGENT-CAPABILITIES
PRODUCT-RELEASE "ACSW (Application Control Software) 3.0"
STATUS current
DESCRIPTION
"Cisco AAA Server MIB capabilities"
SUPPORTS CISCO-AAA-SERVER-EXT-MIB
INCLUDES {
cAAASvrExtSvrTableConfGroup,
cAAASvrExtAppSvrGroupConfGroup,
cAAASvrExtGenericConfGroup1,
cAAASvrExtGenericConfGroup2,
cAAASvrExtSvrGroupConfGroup2,
cAAASvrExtProtoParamConfigGroup1,
cAAASvrExtSvrTableLDAPConfGroup,
cAAASvrExtSvrGroupLDAPConfGroup
}
VARIATION cAAAServerAddrType
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAAServerAddr
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAAServerKeyEncrType
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAAServerDeadTime
ACCESS not-implemented
DESCRIPTION
"Not supported."
VARIATION cAAAServerTimeOut
SYNTAX TimeIntervalSec (0..60)
ACCESS read-only
DESCRIPTION
"Only the range 0-60 is supported.
Create operation not supported."
VARIATION cAAAServerRetransmits
SYNTAX Unsigned32 (0..5)
ACCESS read-only
DESCRIPTION
"Only the range of 0-5 is supported. The object
is not relevant for tacacs+ servers and hence
the value is ignored.
Create operation not supported."
VARIATION cAAASvrGrpLocal
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAASvrGrpTrivial
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAASvrGrpList
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAASvrExtAppToSvrGrpMaxEnt
SYNTAX Unsigned32 (8 )
DESCRIPTION
"The maximum number of Server Group
entries the Agent supports is 8."
VARIATION cAAASvrExtLocalAccLogMaxSize
ACCESS not-implemented
DESCRIPTION
"Not supported."
VARIATION cAAASvrExtClearAccLog
ACCESS read-only
DESCRIPTION
"Set operation not supported."
VARIATION cAAALoginAuthTypeMSCHAP
ACCESS read-only
DESCRIPTION
"Set operation not supported."
VARIATION cAAASvrGrpName
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAASvrGrpProtocol
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAAServerList
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAASvrGrpConfigRowStatus
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAASvrExtSvrGrpSvrListMaxEnt
SYNTAX Unsigned32 (12 )
DESCRIPTION
"The maximum number of Server Group
entries the Agent supports is 12."
VARIATION cAAASvrGrpConfigDeadTime
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAAServerProtoAuthKey
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAAServerProtoKeyEncrType
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAAServerProtoDeadTime
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAAServerProtoTimeOut
SYNTAX TimeIntervalSec (1..60)
ACCESS read-only
DESCRIPTION
"Only the range 1-60 is supported.
Create operation not supported."
VARIATION cAAAServerProtoRetransmits
SYNTAX Unsigned32 (0..5)
ACCESS read-only
DESCRIPTION
"Only the range of 0-5 is supported. The object
is not relevant for tacacs+ servers and hence
the value is ignored.
Create operation not supported."
VARIATION cAAAServerProtoSvrTableMaxEnt
SYNTAX Unsigned32 (64 )
DESCRIPTION
"The maximum number of AAA server
entries in the 'casConfigTable'
for a particular protocol is 64."
VARIATION cAAAServerProtoDirectedReq
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAAServerRootDN
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAASvrGrpLDAPBaseDN
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAASvrGrpLDAPFilterUser
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAASvrGrpLDAPUserProfile
ACCESS read-only
DESCRIPTION
"Create operation not supported."
::= { ciscoAAAServerExtCapability 3 }
ciscoAAAServerExtCapc4710aceVA1R700 AGENT-CAPABILITIES
PRODUCT-RELEASE "ACSW (Application Control Software) A1(7)
for ACE 4710 Application Control Engine
Appliance."
STATUS current
DESCRIPTION
"Cisco AAA Server MIB capabilities"
SUPPORTS CISCO-AAA-SERVER-EXT-MIB
INCLUDES {
cAAASvrExtSvrTableConfGroup,
cAAASvrExtAppSvrGroupConfGroup,
cAAASvrExtGenericConfGroup1,
cAAASvrExtGenericConfGroup2,
cAAASvrExtSvrGroupConfGroup2,
cAAASvrExtProtoParamConfigGroup1,
cAAASvrExtSvrTableLDAPConfGroup,
cAAASvrExtSvrGroupLDAPConfGroup
}
VARIATION cAAAServerAddrType
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAAServerAddr
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAAServerKeyEncrType
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAAServerDeadTime
ACCESS not-implemented
DESCRIPTION
"Not supported."
VARIATION cAAAServerTimeOut
SYNTAX TimeIntervalSec (0..60)
ACCESS read-only
DESCRIPTION
"Only the range 0-60 is supported.
Create operation not supported."
VARIATION cAAAServerRetransmits
SYNTAX Unsigned32 (0..5)
ACCESS read-only
DESCRIPTION
"Only the range of 0-5 is supported. The object
is not relevant for tacacs+ servers and hence
the value is ignored.
Create operation not supported."
VARIATION cAAASvrGrpLocal
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAASvrGrpTrivial
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAASvrGrpList
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAASvrExtAppToSvrGrpMaxEnt
SYNTAX Unsigned32 (8 )
DESCRIPTION
"The maximum number of Server Group
entries the Agent supports is 8."
VARIATION cAAASvrExtLocalAccLogMaxSize
ACCESS not-implemented
DESCRIPTION
"Not supported."
VARIATION cAAASvrExtClearAccLog
ACCESS read-only
DESCRIPTION
"Set operation not supported."
VARIATION cAAALoginAuthTypeMSCHAP
ACCESS read-only
DESCRIPTION
"Set operation not supported."
VARIATION cAAASvrGrpName
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAASvrGrpProtocol
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAAServerList
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAASvrGrpConfigRowStatus
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAASvrExtSvrGrpSvrListMaxEnt
SYNTAX Unsigned32 (12 )
DESCRIPTION
"The maximum number of Server Group
entries the Agent supports is 12."
VARIATION cAAASvrGrpConfigDeadTime
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAAServerProtoAuthKey
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAAServerProtoKeyEncrType
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAAServerProtoDeadTime
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAAServerProtoTimeOut
SYNTAX TimeIntervalSec (1..60)
ACCESS read-only
DESCRIPTION
"Only the range 1-60 is supported.
Create operation not supported."
VARIATION cAAAServerProtoRetransmits
SYNTAX Unsigned32 (0..5)
ACCESS read-only
DESCRIPTION
"Only the range of 0-5 is supported. The object
is not relevant for tacacs+ servers and hence
the value is ignored.
Create operation not supported."
VARIATION cAAAServerProtoSvrTableMaxEnt
SYNTAX Unsigned32 (64 )
DESCRIPTION
"The maximum number of AAA server
entries in the 'casConfigTable'
for a particular protocol is 64."
VARIATION cAAAServerProtoDirectedReq
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAAServerRootDN
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAASvrGrpLDAPBaseDN
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAASvrGrpLDAPFilterUser
ACCESS read-only
DESCRIPTION
"Create operation not supported."
VARIATION cAAASvrGrpLDAPUserProfile
ACCESS read-only
DESCRIPTION
"Create operation not supported."
::= { ciscoAAAServerExtCapability 4 }
END

1226
snmp_mib_archive/CISCO-AAA-SERVER-EXT-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

1031
snmp_mib_archive/CISCO-AAA-SERVER-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

494
snmp_mib_archive/CISCO-AAA-SESSION-MIB.my 2
View File

@ -1,494 +0,0 @@
-- *****************************************************************
-- CISCO-AAA-SESSION-MIB.my: Cisco AAA Session MIB
--
-- November 1999, Ed Richardson
--
-- Copyright (c) 1999, 2000, 2002, 2006 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
CISCO-AAA-SESSION-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32,
Gauge32,
IpAddress,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
DisplayString,
TruthValue,
TEXTUAL-CONVENTION,
RowPointer
FROM SNMPv2-TC
InterfaceIndexOrZero
FROM IF-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoAAASessionMIB MODULE-IDENTITY
LAST-UPDATED "200603210000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-aaa@cisco.com"
DESCRIPTION
"This MIB module provides data for accounting sessions
based on Authentication, Authorization, Accounting
(AAA) protocols.
References:
RFC 2139 RADIUS Accounting
The TACACS+ Protocol Version 1.78, Internet Draft
"
REVISION "200603210000Z"
DESCRIPTION
"Added the casnNasPort and casnVaiIfIndex objects to the
casnActiveTable.
"
REVISION "200204110000Z"
DESCRIPTION
"Imported Unsigned32 from SNMPv2-SMI instead of CISCO-TC
"
REVISION "9911160000Z"
DESCRIPTION
"Initial version
"
::= { ciscoMgmt 150 }
--
-- Textual Conventions
--
--
-- Call Identifier textual convention
--
CctCallId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a Call Identifier.
The call identifier is used as an unique identifier for an
call within the system.
A zero value indicates no call ID.
"
SYNTAX Unsigned32
--
-- Session Identifier textual convention
--
CasnSessionId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents an Accounting Session Identifier.
The session identifier is used as an unique identifier for
a session within the system.
"
SYNTAX Unsigned32 (1..4294967295)
-- AAA Session MIB objects definitions
casnMIBObjects OBJECT IDENTIFIER ::= { ciscoAAASessionMIB 1 }
-- The AAA Session MIB consists of the following groups
-- [1] AAA Session Active Group (casnActive)
-- [2] AAA Session General Group (casnGeneral)
casnActive OBJECT IDENTIFIER ::= { casnMIBObjects 1 }
casnGeneral OBJECT IDENTIFIER ::= { casnMIBObjects 2 }
--**********************************************************************
-- AAA Session Active Group
--**********************************************************************
--
--
--
-- Active Table
--
casnActiveTableEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of entries currently in casnActiveTable
"
::= { casnActive 1 }
casnActiveTableHighWaterMark OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of entries present in casnActiveTable
since last system re-initialization.
This corresponds to the maximum value reported by
casnActiveTableEntries.
"
::= { casnActive 2 }
casnActiveTable OBJECT-TYPE
SYNTAX SEQUENCE OF CasnActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains entries for active AAA accounting
sessions in the system.
"
::= { casnActive 3 }
casnActiveEntry OBJECT-TYPE
SYNTAX CasnActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single accounting session.
Entries are created when a new accounting session
is begun.
Entries are removed when the accounting session
is ended.
Initiating termination of a session with the object
casnDisconnect will cause removal of the entry when
the session completes termination.
"
INDEX { casnSessionId }
::= { casnActiveTable 1 }
CasnActiveEntry ::=
SEQUENCE {
casnSessionId CasnSessionId,
casnUserId DisplayString,
casnIpAddr IpAddress,
casnIdleTime Gauge32,
casnDisconnect TruthValue,
casnCallTrackerId CctCallId,
casnNasPort RowPointer,
casnVaiIfIndex InterfaceIndexOrZero
}
casnSessionId OBJECT-TYPE
SYNTAX CasnSessionId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the session identification used by the
accounting protocol.
This value is unique to a session within the system,
even if multiple accounting protocols are in use.
The value of this object corresponds to these
accounting protocol attributes.
RADIUS: attribute 44, Acct-Session-Id
TACACS+: attribute 'task_id'
"
::= { casnActiveEntry 1 }
casnUserId OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The User login ID or zero length string if unavailable.
The value of this object corresponds to these
accounting protocol attributes.
RADIUS: attribute 1, User-Name
TACACS+: attribute 'user'
"
::= { casnActiveEntry 2 }
casnIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the session or 0.0.0.0 if not
applicable or unavailable.
RADIUS: attribute 8, Framed-IP-Address
TACACS+: attribute 'addr'
"
::= { casnActiveEntry 3 }
casnIdleTime OBJECT-TYPE
SYNTAX Gauge32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time that this session has been idle.
This is the time since the last user-level data has been
received or transmitted. Protocol level handshaking
associated with the call is considered to be idle for
this object.
"
::= { casnActiveEntry 4 }
casnDisconnect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to terminate this session.
Setting the value to true(1) will initiate termination
of this session.
The entry will be removed once the session has completed
termination.
Once this object has been set to true(1), the session
termination process can not be cancelled by setting the
value false(2).
"
::= { casnActiveEntry 5 }
casnCallTrackerId OBJECT-TYPE
SYNTAX CctCallId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the entry index in the
CISCO-CALL-TRACKER-MIB cctActiveTable of the call
corresponding to this accounting session.
Using the value of this object to query the
cctActiveTable will provide more detailed data regarding
the session represented by this casnActiveEntry.
"
::= { casnActiveEntry 6 }
casnNasPort OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies a particular
conceptual row associated with the session identified by
casnSessionId. The conceptual row that this object points
to represents a port that is used to transport a session.
If the port transporting the session cannot be determined,
the value of this object will be zeroDotZero.
For example, suppose a session is established using an ATM
PVC. If the ifIndex of the ATM interface is 7, and the
VPI/VCI values of the PVC are 1, 100 respectively, then
the value of this object might be as follows:
casnNasPort.15 = atmVclAdminStatus.7.1.100
^ ^ ^ ^
| | | |
casnSessionId --+ | | |
ifIndex -------------------------+ | |
atmVclVpi ---------------------------+ |
atmVclVci ------------------------------+
where atmVclAdminStatus is the first accessible object
of the atmVclTable of the ATM-MIB.
"
::= { casnActiveEntry 7 }
casnVaiIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the Virtual Access Interface (VAI)
that is associated with the PPP session.
This interface may not be represented in the IF-MIB in
which case the value of this object will be zero.
"
::= { casnActiveEntry 8 }
--**********************************************************************
-- AAA Session General Group
--**********************************************************************
--
--
casnTotalSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of sessions since last system
re-initialization.
This value includes all sessions currently in the
casnActiveTable and all previous sessions whether
terminated via casnDisconnect or via other
mechanisms.
"
::= { casnGeneral 1 }
casnDisconnectedSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of sessions which have been disconnected using
casnDisconnect since last system re-initialization.
This value includes any sessions still in the
casnActiveTable with a casnDisconnect value of true(1) and
all previous sessions which terminated as a result of
setting casnDisconnect.
"
::= { casnGeneral 2 }
--**********************************************************************
-- Notifications
--**********************************************************************
casnMIBNotificationPrefix OBJECT IDENTIFIER ::=
{ ciscoAAASessionMIB 2 }
casnMIBNotifications OBJECT IDENTIFIER ::=
{ casnMIBNotificationPrefix 1 }
casnMIBConformance OBJECT IDENTIFIER ::=
{ ciscoAAASessionMIB 3 }
casnMIBCompliances OBJECT IDENTIFIER ::=
{ casnMIBConformance 1 }
casnMIBGroups OBJECT IDENTIFIER ::=
{ casnMIBConformance 2 }
-- compliance statements
casnMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO AAA Session MIB"
MODULE -- this module
MANDATORY-GROUPS
{ casnActiveGroup,
casnGeneralGroup
}
OBJECT casnDisconnect
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { casnMIBCompliances 1 }
casnMIBComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the CISCO AAA Session MIB"
MODULE -- this module
MANDATORY-GROUPS
{ casnActiveGroup,
casnGeneralGroup,
casnActiveGroupSup1
}
OBJECT casnDisconnect
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { casnMIBCompliances 2 }
-- units of conformance
casnActiveGroup OBJECT-GROUP
OBJECTS {
casnActiveTableEntries,
casnActiveTableHighWaterMark,
casnUserId,
casnIpAddr,
casnIdleTime,
casnDisconnect,
casnCallTrackerId
}
STATUS current
DESCRIPTION
"A collection of objects providing the
AAA session information.
"
::= { casnMIBGroups 1 }
casnGeneralGroup OBJECT-GROUP
OBJECTS {
casnTotalSessions,
casnDisconnectedSessions
}
STATUS current
DESCRIPTION
"A collection of objects providing the
AAA session information.
"
::= { casnMIBGroups 2 }
casnActiveGroupSup1 OBJECT-GROUP
OBJECTS {
casnNasPort,
casnVaiIfIndex
}
STATUS current
DESCRIPTION
"A collection of objects that supplements
the casnActiveGroup.
"
::= { casnMIBGroups 3 }
END

207
snmp_mib_archive/CISCO-AAL5-EXT-MIB.my 2
View File

@ -1,207 +0,0 @@
--*****************************************************************
-- CISCO-AAL5-EXT-MIB.my : CISCO AAL5 EXT MIB file
--
-- June 2001, Salil Wadnerkar
--
-- Copyright (c) 2001 by cisco Systems, Inc.
-- All rights reserved.
--
--*****************************************************************
CISCO-AAL5-EXT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
ciscoMgmt
FROM CISCO-SMI
aal5VccEntry
FROM ATM-MIB;
ciscoAal5ExtMIB MODULE-IDENTITY
LAST-UPDATED "200111050000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-atm@cisco.com"
DESCRIPTION
"This MIB is the RFC 1695 extension for Cisco product.
It provides the additional AAL5 performance statistics
of a VCC from RFC 1695."
REVISION "200111050000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 9999 }
ciscoAal5ExtMIBObjects OBJECT IDENTIFIER ::= { ciscoAal5ExtMIB 1 }
cAal5ExtConnections OBJECT IDENTIFIER ::= { ciscoAal5ExtMIBObjects 1 }
-- This table augments the aal5VccTable defined in RFC 1695.
-- It contains additional AAL5 performance statistics of a VCC
-- in terms of cells and also the drops at the interface associated
-- with an AAL5 entity in an ATM host or ATM switch.
cAal5ExtVccTable OBJECT-TYPE
SYNTAX SEQUENCE OF CAal5ExtVccEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains AAL5 VCC performance
parameters beyond that provided by aal5VccEntry
defined in RFC1695 and AAL5 MIB."
::= { cAal5ExtConnections 1 }
cAal5ExtVccEntry OBJECT-TYPE
SYNTAX CAal5ExtVccEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This list contains the additional AAL5 VCC performance
parameters beyond that provided by aal5VccEntry defined
in RFC1695."
AUGMENTS { aal5VccEntry }
::= { cAal5ExtVccTable 1 }
CAal5ExtVccEntry ::= SEQUENCE {
cAal5VccInDroppedPkts Counter32,
cAal5VccOutDroppedPkts Counter32,
cAal5VccInDroppedOctets Counter32,
cAal5VccOutDroppedOctets Counter32,
cAal5VccInCells Counter32,
cAal5VccOutCells Counter32,
cAal5VccInDroppedCells Counter32,
cAal5VccOutDroppedCells Counter32
}
cAal5VccInDroppedPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AAL5 CPCS PDUs dropped at the receive side of this
AAL5 VCC at the interface associated with an AAL5 entity."
::= { cAal5ExtVccEntry 1 }
cAal5VccOutDroppedPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AAL5 CPCS PDUs dropped at the transmit side of this
AAL5 VCC at the interface associated with an AAL5 entity."
::= { cAal5ExtVccEntry 2 }
cAal5VccInDroppedOctets OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AAL5 CPCS PDU Octets dropped at the receive side of
this AAL5 VCC at the interface associated with an AAL5 entity."
::= { cAal5ExtVccEntry 3 }
cAal5VccOutDroppedOctets OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AAL5 CPCS PDU Octets dropped at the transmit side of
this AAL5 VCC at the interface associated with an AAL5 entity."
::= { cAal5ExtVccEntry 4 }
cAal5VccInCells OBJECT-TYPE
SYNTAX Counter32
UNITS "cells"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AAL5 SAR cells received on this AAL5 VCC at the
interface associated with an AAL5 entity."
::= { cAal5ExtVccEntry 5 }
cAal5VccOutCells OBJECT-TYPE
SYNTAX Counter32
UNITS "cells"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AAL5 SAR cells transmitted on this AAL5 VCC at
the interface associated with an AAL5 entity."
::= { cAal5ExtVccEntry 6 }
cAal5VccInDroppedCells OBJECT-TYPE
SYNTAX Counter32
UNITS "cells"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AAL5 SAR cells dropped at the receive side of this
AAL5 VCC at the interface associated with an AAL5 entity."
::= { cAal5ExtVccEntry 7 }
cAal5VccOutDroppedCells OBJECT-TYPE
SYNTAX Counter32
UNITS "cells"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AAL5 SAR cells dropped at the transmit side of this
AAL5 VCC at the interface associated with an AAL5 entity."
::= { cAal5ExtVccEntry 8 }
-- Conformance Information
ciscoAAL5ExtMIBConformance OBJECT IDENTIFIER ::= { ciscoAal5ExtMIB 2 }
ciscoAAL5ExtMIBCompliances OBJECT IDENTIFIER ::= { ciscoAAL5ExtMIBConformance 1 }
ciscoAAL5ExtMIBGroups OBJECT IDENTIFIER ::= { ciscoAAL5ExtMIBConformance 2 }
-- Compliance Statement
ciscoAAL5ExtMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
this Cisco AAL5 EXT MIB."
MODULE -- this module
MANDATORY-GROUPS { ciscoAal5ExtMIBGroup }
::= { ciscoAAL5ExtMIBCompliances 1 }
-- units of conformance:
ciscoAal5ExtMIBGroup OBJECT-GROUP
OBJECTS {
cAal5VccInDroppedPkts,
cAal5VccOutDroppedPkts,
cAal5VccInDroppedOctets,
cAal5VccOutDroppedOctets,
cAal5VccInCells,
cAal5VccOutCells,
cAal5VccInDroppedCells,
cAal5VccOutDroppedCells
}
STATUS current
DESCRIPTION
"A collection of objects providing these extra AAL5
interface related statistics."
::= { ciscoAAL5ExtMIBGroups 1 }
END

318
snmp_mib_archive/CISCO-AAL5-MIB.my 2
View File

@ -1,318 +0,0 @@
--*****************************************************************
-- CISCO-AAL5-MIB.my : CISCO AAL5 MIB file
--
-- Novermber 1996, Liqin Dong
--
-- Copyright (c) 1997, 2003, 2004 by cisco Systems, Inc.
-- All rights reserved.
--
--*****************************************************************
CISCO-AAL5-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32,
Counter64
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
ciscoMgmt
FROM CISCO-SMI
aal5VccEntry
FROM ATM-MIB;
ciscoAal5MIB MODULE-IDENTITY
LAST-UPDATED "200309170000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-atm@cisco.com"
DESCRIPTION
"Cisco Enterprise AAL5 MIB file that provide AAL5
specific information that are either excluded by
RFC 1695 or specific to Cisco product."
REVISION "200309170000Z"
DESCRIPTION
"Added following objects in cAal5VccTable:
cAal5VccHCInPkts,
cAal5VccHCOutPkts,
cAal5VccHCInOctets,
cAal5VccHCOutOctets"
REVISION "200210170000Z"
DESCRIPTION
"Latest version of this MIB module with extended support
for vc drop stats."
REVISION "199611150000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 66 }
ciscoAal5MIBObjects OBJECT IDENTIFIER ::= { ciscoAal5MIB 1 }
cAal5Connections OBJECT IDENTIFIER ::= { ciscoAal5MIBObjects 1 }
-- This table augments the aal5VccTable defined in RFC 1695.
-- It contains additional AAL5 performance statistics of a VCC
-- at the interface associated with an AAL5 entity in an ATM
-- host or ATM switch.
cAal5VccTable OBJECT-TYPE
SYNTAX SEQUENCE OF CAal5VccEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains AAL5 VCC performance
parameters beyond that provided by aal5VccEntry
defined in RFC1695."
::= { cAal5Connections 1 }
cAal5VccEntry OBJECT-TYPE
SYNTAX CAal5VccEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This list contains the additional AAL5 VCC performance
parameters beyond that provided by aal5VccEntry defined
in RFC1695."
AUGMENTS { aal5VccEntry }
::= { cAal5VccTable 1 }
CAal5VccEntry ::= SEQUENCE {
cAal5VccInPkts Counter32,
cAal5VccOutPkts Counter32,
cAal5VccInOctets Counter32,
cAal5VccOutOctets Counter32,
cAal5VccInDroppedPkts Counter32,
cAal5VccOutDroppedPkts Counter32,
cAal5VccInDroppedOctets Counter32,
cAal5VccOutDroppedOctets Counter32,
cAal5VccHCInPkts Counter64,
cAal5VccHCOutPkts Counter64,
cAal5VccHCInOctets Counter64,
cAal5VccHCOutOctets Counter64
}
cAal5VccInPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AAL5 CPCS PDUs received on this AAL5 VCC at the
interface associated with an AAL5 entity."
::= { cAal5VccEntry 1 }
cAal5VccOutPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AAL5 CPCS PDUs transmitted on this AAL5 VCC at
the interface associated with an AAL5 entity."
::= { cAal5VccEntry 2 }
cAal5VccInOctets OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AAL5 CPCS PDU octets received on this AAL5 VCC
at the interface associated with an AAL5 entity."
::= { cAal5VccEntry 3 }
cAal5VccOutOctets OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AAL5 CPCS PDU octets transmitted on this AAL5
VCC at the interface associated with an AAL5 entity."
::= { cAal5VccEntry 4 }
cAal5VccInDroppedPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AAL5 CPCS PDUs dropped at the
receive side of this AAL5 VCC at the interface
associated with an AAL5 entity."
::= { cAal5VccEntry 5 }
cAal5VccOutDroppedPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AAL5 CPCS PDUs dropped at the transmit side
of this AAL5 VCC at the interface associated with an
AAL5 entity."
::= { cAal5VccEntry 6 }
cAal5VccInDroppedOctets OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AAL5 CPCS PDU Octets dropped at the
receive side of this AAL5 VCC at the interface
associated with an AAL5 entity."
::= { cAal5VccEntry 7 }
cAal5VccOutDroppedOctets OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AAL5 CPCS PDU Octets dropped at the
transmit side of this AAL5 VCC at the interface
associated with an AAL5 entity."
::= { cAal5VccEntry 8 }
cAal5VccHCInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is 64bit (High Capacity) version of cAal5VccInPkts
counters."
::= { cAal5VccEntry 9 }
cAal5VccHCOutPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is 64bit (High Capacity) version of cAal5VccOutPkts
counters."
::= { cAal5VccEntry 10 }
cAal5VccHCInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is 64bit (High Capacity) version of cAal5VccInOctets
counters."
::= { cAal5VccEntry 11 }
cAal5VccHCOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is 64bit (High Capacity) version of cAal5VccOutOctets
counters."
::= { cAal5VccEntry 12 }
-- Conformance Information
ciscoAal5MIBConformance OBJECT IDENTIFIER
::= { ciscoAal5MIB 3 }
ciscoAal5MIBCompliances OBJECT IDENTIFIER
::= { ciscoAal5MIBConformance 1 }
ciscoAal5MIBGroups OBJECT IDENTIFIER
::= { ciscoAal5MIBConformance 2 }
-- Compliance Statement
ciscoAal5MIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
this Cisco AAL5 MIB."
MODULE -- this module
MANDATORY-GROUPS { ciscoAal5MIBGroup }
::= { ciscoAal5MIBCompliances 1 }
ciscoAal5MIBComplianceRev1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
this Cisco AAL5 MIB."
MODULE -- this module
MANDATORY-GROUPS { ciscoAal5MIBGroup }
GROUP ciscoAal5VcStatsExtMIBGroup
DESCRIPTION
"A collection of objects providing these extra
AAL5 interface related statistics"
::= { ciscoAal5MIBCompliances 2 }
ciscoAal5MIBComplianceRev2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
64bit counters for Vcc received/transmit PDU and octets
objects for Cisco AAL5 MIB."
MODULE -- this module
MANDATORY-GROUPS { ciscoAal5MIBGroup }
GROUP ciscoAal5VcStatsExtMIBGroup
DESCRIPTION
"A collection of objects providing these extra
AAL5 interface related statistics."
GROUP ciscoAal5MIBHCGroup
DESCRIPTION
"This group of AAL5 statistics counters are
mandatory only for those ATM interfaces
which support 64bit counters."
::= { ciscoAal5MIBCompliances 3 }
-- units of conformance:
ciscoAal5MIBGroup OBJECT-GROUP
OBJECTS {
cAal5VccInPkts,
cAal5VccOutPkts,
cAal5VccInOctets,
cAal5VccOutOctets
}
STATUS current
DESCRIPTION
"A collection of objects providing AAL5 related
parameters."
::= { ciscoAal5MIBGroups 1 }
ciscoAal5VcStatsExtMIBGroup OBJECT-GROUP
OBJECTS {
cAal5VccInDroppedPkts,
cAal5VccOutDroppedPkts,
cAal5VccInDroppedOctets,
cAal5VccOutDroppedOctets
}
STATUS current
DESCRIPTION
"A collection of objects providing extension to AAL5
related vc drop statistics"
::= { ciscoAal5MIBGroups 2 }
ciscoAal5MIBHCGroup OBJECT-GROUP
OBJECTS {
cAal5VccHCInPkts,
cAal5VccHCOutPkts,
cAal5VccHCInOctets,
cAal5VccHCOutOctets
}
STATUS current
DESCRIPTION
"A collection of objects providing 64bit AAL5 related
parameters."
::= { ciscoAal5MIBGroups 3 }
END

199
snmp_mib_archive/CISCO-ACCESS-ENVMON-MIB.my 2
View File

@ -1,199 +0,0 @@
-- *****************************************************************
-- CISCO-ACCESS-ENVMON-MIB.my: CISCO ACCESS ENVMON MIB file
--
-- November 1996 Hongchi Shih
--
-- Copyright (c) 1996, 1997, 1998 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-ACCESS-ENVMON-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
ciscoEnvMonSupplyStatusEntry,
ciscoEnvMonTemperatureStatusDescr,
ciscoEnvMonTemperatureState,
ciscoEnvMonVoltageStatusDescr,
ciscoEnvMonVoltageState
FROM CISCO-ENVMON-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoAccessEnvMonMIB MODULE-IDENTITY
LAST-UPDATED "9808050000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-snmp@cisco.com"
DESCRIPTION
"The MIB module to describe the additional status of
the Environmental Monitor on those Cisco Access devices
which support one.
"
REVISION "9808050000Z"
DESCRIPTION
"Rename the enumerated values for caemSupplyFailedComponent
and add fan, overvoltage failure events to it.
Add caemVoltageNotification.
"
::= { ciscoMgmt 61 }
-- Cisco Access Environmental Monitor MIB objects definitions
caemObjects OBJECT IDENTIFIER ::= { ciscoAccessEnvMonMIB 1 }
--
-- Cisco Access Environmental Monitor power supply table
-- This table augments the ciscoEnvMonSupplyStatusTable defined in
-- CISCO-ENVMON-MIB.
--
caemSupplyStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CaemSupplyStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the additional power supply information
that are not covered in the ciscoEnvMonSupplyStatusTable of
CISCO-ENVMON-MIB.
"
::= { caemObjects 1 }
caemSupplyStatusEntry OBJECT-TYPE
SYNTAX CaemSupplyStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional information about the failure component or location
in the power Supply beyond that provided by Cisco Environmental
Monitor MIB's ciscoEnvMonSupplyStatusEntry.
"
AUGMENTS { ciscoEnvMonSupplyStatusEntry }
::= { caemSupplyStatusTable 1 }
CaemSupplyStatusEntry ::=
SEQUENCE {
caemSupplyFailedComponent INTEGER
}
caemSupplyFailedComponent OBJECT-TYPE
SYNTAX INTEGER {
none (1),
inputVoltage (2),
dcOutputVoltage (3),
thermal (4),
multiple (5),
fan (6),
overvoltage (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The failure component of the power supply being instrumented.
none - No failure.
inputVoltage - Input power lost in one of the power supplies
dcOutputVoltage - DC output voltage lost in one of the power supplies
thermal - Power supply thermal failure.
multiple - Multiple failures.
fan - Fan failure
overvoltage - Over voltage.
"
::= { caemSupplyStatusEntry 1 }
--****************************************************************************
-- Notifications
--****************************************************************************
caemMIBNotificationPrefix
OBJECT IDENTIFIER ::= { ciscoAccessEnvMonMIB 2 }
caemMIBNotifications
OBJECT IDENTIFIER ::= { caemMIBNotificationPrefix 0 }
caemTemperatureNotification NOTIFICATION-TYPE
OBJECTS {
ciscoEnvMonTemperatureStatusDescr,
ciscoEnvMonTemperatureState
}
STATUS current
DESCRIPTION
"A caemTemperatureNotification is sent if the over temperature
condition is detected in the managed system.
This is a replacement for the ciscoEnvMonTemperatureNotification
trap because the information 'ciscoEnvMonTemperatureStatusValue'
required by the trap is not available in the managed system.
"
::= { caemMIBNotifications 1 }
caemVoltageNotification NOTIFICATION-TYPE
OBJECTS {
ciscoEnvMonVoltageStatusDescr,
ciscoEnvMonVoltageState
}
STATUS current
DESCRIPTION
"A caemVoltageNotification is sent if the over voltage
condition is detected and ciscoEnvMonVoltageState is not set
to 'notPresent' in the managed system.
This is a replacement for the ciscoEnvMonVoltageNotification
trap because the information 'ciscoEnvMonVoltageStatusValue'
required by the trap is not available in the managed system.
"
::= { caemMIBNotifications 2 }
caemConformance OBJECT IDENTIFIER ::=
{ ciscoAccessEnvMonMIB 3 }
caemCompliances OBJECT IDENTIFIER ::=
{ caemConformance 1 }
caemGroups OBJECT IDENTIFIER ::=
{ caemConformance 2 }
-- compliance statements
caemCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the Cisco Environmental Monitor Supplemental MIB."
MODULE -- this module
MANDATORY-GROUPS
{ caemGroup }
::= { caemCompliances 1 }
-- units of conformance
caemGroup OBJECT-GROUP
OBJECTS {
caemSupplyFailedComponent
}
STATUS current
DESCRIPTION
"A collection of objects providing the additional Environmental
Monitor information beyond that provided by
Cisco Environmental Monitor MIB.
"
::= { caemGroups 1 }
END

578
snmp_mib_archive/CISCO-ADMISSION-POLICY-MIB.my 2
View File

@ -1,578 +0,0 @@
-- *****************************************************************
-- CISCO-ADMISSION-POLICY-MIB.my
--
-- April 2008, Edward Pham
--
-- Copyright (c) 2008 by cisco Systems Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-ADMISSION-POLICY-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Gauge32,
Integer32,
Counter32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
MacAddress
FROM SNMPv2-TC
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB
InterfaceIndex
FROM IF-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoAdmissionPolicyMIB MODULE-IDENTITY
LAST-UPDATED "200806110000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-snmp@cisco.com"
DESCRIPTION
"This MIB module defines managed objects that facilitate
the management of policies upon host(s) admission to
a network.
The information available through this MIB includes:
o Statistics information such as number of total and
active sessions.
o Session information such as IP and MAC address of
host, client type, and session state.
o QoS and Security policy applied to host traffic upon
host admission to a network.
The following terms are used throughout this MIB:
QoS (Quality of Service) is the method which attempts
to ensure that the network requirements of different
applications can be met by giving preferential forwarding
treatment to some traffic.
ACL (Access Control List) which contains filters used
to identify traffic flows with certain characteristics.
Downloadable ACL is a set of filters, configured on the
RADIUS server which are downloaded during authorization
phase of admission features like dot1x, authProxy, etc.
SGT (Security Group Tag) is a unique 16 bits value assigned
to every security group and used by network devices to
enforce network policies.
URL: Universal Resource Locator.
URL-Redirect ACL is used for URL redirection feature. Any
ingress HTTP from the host that matches the ACL content
is subjected to redirection to the URL address specified by
the URL-Redirect string.
URL redirect string is the URL to which HTTP traffic to
the host would be redirected."
REVISION "200806110000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 653 }
--
-- Definitions of textual convention
--
CapSessionId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An octet string describes an unique session identification."
SYNTAX OCTET STRING (SIZE (1..64))
CapQosPolicy ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"An octet string, preferably in human-readable form,
describes a QoS policy."
SYNTAX OCTET STRING (SIZE (0..255))
CapAclName ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"An octet string, preferably in human-readable form,
describes the name of an ACL."
SYNTAX OCTET STRING (SIZE (0..255))
CapURLString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention defines the URL string.
The Universal Resource Locator (URL). The URL strings
are compact string representation for a resource
available via internet. This is the address location
of the page to load. The string should represent a
fully qualifying string with the format
'protocol:/server/page'. In general the string should
point to any value that can be saved/loaded.
Any limitation for the URL must be defined as part of
the description of any object which uses this syntax.
The description of any object which uses this syntax
must specifically describe the meaning of zero length
value."
REFERENCE
"Uniform Resource Locators. RFC 1738."
SYNTAX OCTET STRING (SIZE(0..255))
CapPolicyState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention indicates the current state
of a policy applied to host traffic.
'notApplicable' indicates that the policy is not applicable.
'success' indicates that the policy is applied successfully.
'failure' indicates that the policy is failed to apply.
'inProgress' indicates that the policy application is
in progress.
'ipWait' indicates that the policy is waiting for IP
address assignment. "
SYNTAX INTEGER {
notApplicable(1),
success(2),
failure(3),
inProgress(4),
ipWait(5)
}
--
-- Objects definition
--
ciscoAdmissionPolicyMIBNotifs OBJECT IDENTIFIER
::= { ciscoAdmissionPolicyMIB 0 }
ciscoAdmissionPolicyMIBObjects OBJECT IDENTIFIER
::= { ciscoAdmissionPolicyMIB 1 }
ciscoAdmissionPolicyMIBConformance OBJECT IDENTIFIER
::= { ciscoAdmissionPolicyMIB 2 }
capSessions
OBJECT IDENTIFIER ::= { ciscoAdmissionPolicyMIBObjects 1 }
--
-- capSessions
--
capTotalSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total numbers of sessions
created in the device since the last system reset."
::= { capSessions 1 }
capActiveSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the currently active sessions
in the device."
::= { capSessions 2 }
--
-- Session Information Table
--
capSidSessionInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CapSidSessionInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists admission policy sessions based on unique
session identifier.
An entry is created by the agent when an admission policy
session has successfully registered to the system.
An entry is deleted by the agent upon de-registration of the
admission policy session with system."
::= { capSessions 3 }
capSidSessionInfoEntry OBJECT-TYPE
SYNTAX CapSidSessionInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the management information of a particular
active session based on unique session identifier."
INDEX { IMPLIED capSidSessionIndex }
::= { capSidSessionInfoTable 1 }
CapSidSessionInfoEntry ::= SEQUENCE {
capSidSessionIndex CapSessionId,
capSidSessionIfIndex InterfaceIndex,
capSidSessionMacAddress MacAddress,
capSidSessionAddressType InetAddressType,
capSidSessionAddress InetAddress,
capSidSessionFeatureType BITS
}
capSidSessionIndex OBJECT-TYPE
SYNTAX CapSessionId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely identifies a session."
::= { capSidSessionInfoEntry 1 }
capSidSessionIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the ifIndex value of the interface
on which the session is established."
::= { capSidSessionInfoEntry 2 }
capSidSessionMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the MAC address of the host."
::= { capSidSessionInfoEntry 3 }
capSidSessionAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the type of Internet address
assigned for the host."
::= { capSidSessionInfoEntry 4 }
capSidSessionAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Internet address assigned for
the host. The type of this address is determined by
the value of capSidSessionAddressType object."
::= { capSidSessionInfoEntry 5 }
capSidSessionFeatureType OBJECT-TYPE
SYNTAX BITS {
dot1x(0),
mab(1),
eou(2),
authProxy(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the admission features associated
with the session.
'dot1x' indicates that the admission feature is
802.1x feature.
'mab' indicates that the admission feature is
Mac Authentication Bypass feature.
'eou' indicates that the admission feature is
Extensible Authentication Protocol over UDP feature.
'authProxy' indicates that the admission feature is
Authentication Proxy feature."
::= { capSidSessionInfoEntry 6 }
--
-- Session Policy Table
--
capSidSessionPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CapSidSessionPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the policies that will be enforced
per session per admission feature. The session in this
table should have a corresponding entry in
capSidSessionInfoTable."
::= { capSessions 4 }
capSidSessionPolicyEntry OBJECT-TYPE
SYNTAX CapSidSessionPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the management information of a
particular admission feature of a session."
INDEX { capSidSessionIndex, capSidSessionPolicyIndex }
::= { capSidSessionPolicyTable 1 }
CapSidSessionPolicyEntry ::= SEQUENCE {
capSidSessionPolicyIndex INTEGER,
capSidIngressQosPolicy CapQosPolicy,
capSidIngressQosPolicyState CapPolicyState,
capSidEgressQosPolicy CapQosPolicy,
capSidEgressQosPolicyState CapPolicyState,
capSidDownloadableAclName CapAclName,
capSidDownloadableAclState CapPolicyState,
capSidUrlRedirectAclName CapAclName,
capSidUrlRedirectAclState CapPolicyState,
capSidRedirectUrlString CapURLString,
capSidRedirectUrlStringState CapPolicyState,
capSidSecurityGroupTag Integer32
}
capSidSessionPolicyIndex OBJECT-TYPE
SYNTAX INTEGER {
dot1x(1),
mab(2),
eou(3),
authProxy(4)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the admission feature which
a host is subjected to in a session.
'dot1x' indicates that the admission feature is
802.1x feature.
'mab' indicates that the admission feature is
Mac Authentication Bypass feature.
'eou' indicates that the admission feature is
Extensible Authentication Protocol over UDP feature.
'authProxy' indicates that the admission feature is
Authentication Proxy feature."
::= { capSidSessionPolicyEntry 1 }
capSidIngressQosPolicy OBJECT-TYPE
SYNTAX CapQosPolicy
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of an existing QoS
policy which will be applied to incoming traffic
in this session. An empty string indicates that no such
policy is applied."
::= { capSidSessionPolicyEntry 2 }
capSidIngressQosPolicyState OBJECT-TYPE
SYNTAX CapPolicyState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current state of the
QoS policy which will be applied to incoming traffic
in this session."
::= { capSidSessionPolicyEntry 3 }
capSidEgressQosPolicy OBJECT-TYPE
SYNTAX CapQosPolicy
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of an existing QoS
policy which will be applied to outgoing traffic
in this session. An empty string indicates that no
such policy is applied."
::= { capSidSessionPolicyEntry 4 }
capSidEgressQosPolicyState OBJECT-TYPE
SYNTAX CapPolicyState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current state of the QoS
policy which will be applied to outgoing traffic
in this session."
::= { capSidSessionPolicyEntry 5 }
capSidDownloadableAclName OBJECT-TYPE
SYNTAX CapAclName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of a Downloadable
ACL which will be applied to the host traffic.
An empty string indicates that no such ACL is
applied."
::= { capSidSessionPolicyEntry 6 }
capSidDownloadableAclState OBJECT-TYPE
SYNTAX CapPolicyState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the state of this session
downloadable ACL policy."
::= { capSidSessionPolicyEntry 7 }
capSidUrlRedirectAclName OBJECT-TYPE
SYNTAX CapAclName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the ACL name that redirected traffic
from the host will be subjected to. An empty string indicates
that no such ACL is applied."
::= { capSidSessionPolicyEntry 8 }
capSidUrlRedirectAclState OBJECT-TYPE
SYNTAX CapPolicyState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the state of this session
URL-Redirect ACL policy."
::= { capSidSessionPolicyEntry 9 }
capSidRedirectUrlString OBJECT-TYPE
SYNTAX CapURLString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the URL that traffic from
the host will be redirected to. An empty string indicates
that no such URL is applied."
::= { capSidSessionPolicyEntry 10 }
capSidRedirectUrlStringState OBJECT-TYPE
SYNTAX CapPolicyState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the state of this session
URL-Redirect string policy."
::= { capSidSessionPolicyEntry 11 }
capSidSecurityGroupTag OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the SGT value assigned to the
host that initiated this session. Value of -1 indicates
that there is no SGT value assigned."
::= { capSidSessionPolicyEntry 12 }
--
-- Conformance
--
ciscoAdmissionPolicyMIBCompliances
OBJECT IDENTIFIER ::= { ciscoAdmissionPolicyMIBConformance 1 }
ciscoAdmissionPolicyMIBGroups
OBJECT IDENTIFIER ::= { ciscoAdmissionPolicyMIBConformance 2 }
ciscoAdmissionPolicyMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the CISCO-ADMISSION-POLICY-MIB"
MODULE
MANDATORY-GROUPS {
capSessionStatisticsGroup
}
GROUP capSidSessionPolicyGroup
DESCRIPTION
"This group is mandatory only for platforms which support
policy information for a session based on unique session
identifier."
GROUP capSidSessionInfoGroup
DESCRIPTION
"This group is mandatory only for platforms which provide
session information based on unique session identifier."
::= { ciscoAdmissionPolicyMIBCompliances 1 }
--
-- Units of Conformance
--
capSessionStatisticsGroup OBJECT-GROUP
OBJECTS {
capTotalSessions,
capActiveSessions
}
STATUS current
DESCRIPTION
"A collection of object which provides session statistics
information in the device."
::= { ciscoAdmissionPolicyMIBGroups 1 }
capSidSessionInfoGroup OBJECT-GROUP
OBJECTS {
capSidSessionAddressType,
capSidSessionAddress,
capSidSessionIfIndex,
capSidSessionMacAddress,
capSidSessionFeatureType
}
STATUS current
DESCRIPTION
"A collection of objects which provides managed information
of a session based on unique session identifier."
::= { ciscoAdmissionPolicyMIBGroups 2 }
capSidSessionPolicyGroup OBJECT-GROUP
OBJECTS {
capSidIngressQosPolicy,
capSidIngressQosPolicyState,
capSidEgressQosPolicy,
capSidEgressQosPolicyState,
capSidDownloadableAclName,
capSidDownloadableAclState,
capSidRedirectUrlString,
capSidRedirectUrlStringState,
capSidUrlRedirectAclName,
capSidUrlRedirectAclState,
capSidSecurityGroupTag
}
STATUS current
DESCRIPTION
"A collection of objects which provides policy information
in a session based on unique session identifier."
::= { ciscoAdmissionPolicyMIBGroups 3 }
END

799
snmp_mib_archive/CISCO-ADSL-CAP-LINE-MIB.my 2
View File

@ -1,799 +0,0 @@
-- *****************************************************************
-- Description of managed objects for ADSL CAP line interfaces.
--
-- October 1999 Patrick Gili
--
-- Copyright (c) 1999, 2000, 2001 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-ADSL-CAP-LINE-MIB DEFINITIONS ::= BEGIN
IMPORTS
Counter32,
Gauge32,
Integer32,
MODULE-IDENTITY,
OBJECT-TYPE FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
TruthValue FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
ciscoMgmt FROM CISCO-SMI
AdslPerfCurrDayCount,
AdslPerfPrevDayCount FROM ADSL-TC-MIB
adslAtucIntervalNumber,
adslLineConfProfileName FROM ADSL-LINE-MIB
ifIndex FROM IF-MIB
PerfCurrentCount,
PerfIntervalCount FROM PerfHist-TC-MIB
;
ciscoAdslLineCapMIB MODULE-IDENTITY
LAST-UPDATED "200103010000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO "Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
Tel: +1 800 553-NETS
E-mail: cs-dslam.com"
DESCRIPTION
"This MIB module serves as an enterprise-specific extension of
the ADSL-LINE-MIB. The structure of this MIB module shadows
the structure of the ADSL-LINE-MIB, table for table. The tables
defined by this MIB module contain managed objects that meet the
following criteria:
1) A managed object represents an attribute or characteristic
specific to CAP (Carrierless AM/PM) modems.
2) The ADSL-CAP-LINE-MIB does not already contain a managed
object representing the same information as this managed
object.
Observe that entries contained by the tables in this MIB module
do not augment the corresponding entries in the ADSL-LINE-MIB,
as every modem represented by the ADSL-LINE-MIB is not
necessarily a CAP modem.
Also observe that entries contained by the tables in this MIB
module do not augment the corresponding entries in the
ADSL-CAP-LINE-MIB, as this assumes that the ADSL-CAP-LINE-MIB
defines tables that correspond to every table defined by the
ADSL-LINE-MIB. At this time, this assumption does not hold
true.
*** ABBREVIATIONS, ACRONYMS, AND SYMBOLS ***
ADSL - Asymmetric Digital Subscriber Line.
ATM - Asynchronous Transfer Mode.
ATU-C - ADSL Transceiver Unit, Central Office end.
ATU-R - ADSL Transceiver Unit, Remote terminal end.
BER - Bit Error Ratio.
CAP - Carrierless Amplitude Modulation / Pulse Modulation.
DSL - Digital Subscriber Line.
SNR - Signal-to-Noise Ratio.
STM - Synchronous Transfer Mode.
*** DEFINITIONS ***
DOWNSTREAM
The flow of data in the direction from the ATU-C to ATU-R.
MARGIN (also referred to as 'SNR margin')
The difference between the SNR of the received signal and
the SNR required to provide a BER of 10E-7.
SYMBOL
The number of bits the transmitter is capable of
multiplexing and modulating in a single signalling interval.
SYMBOL RATE
The rate at which all symbols are transmitted.
UPSTREAM
The flow of data in the direction from the ATU-R to ATU-C."
REVISION "200103010000Z"
DESCRIPTION
"Changed MAX-ACCESS for cAdslAtucCapConfUp17KBaudEnable to
read-create due to the the bug fix of MAX-ACCESS in the
broken MIB object."
::= { ciscoMgmt 149 }
-- Textual Conventions
AdslLineCapDownstreamRate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The downstream line rate at which an ADSL line can train at,
given an ATU-C and ATU-R implementing the CAP line code."
SYNTAX INTEGER ( 7168000 |
6272000 |
5120000 |
4480000 |
3200000 |
2688000 |
2560000 |
2240000 |
1920000 |
1600000 |
1280000 |
1024000 |
960000 |
896000 |
768000 |
640000 |
512000 |
384000 |
256000 |
0 )
AdslLineCapUpstreamRate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The upstream line rate at which an ADSL line can train at,
given an ATU-C and ATU-R implementing the CAP line code."
SYNTAX INTEGER ( 1088000 |
952000 |
816000 |
680000 |
544000 |
408000 |
272000 |
91000 |
0 )
-- MIB Objects Definitions
ciscoAdslLineCapMIBObjects OBJECT IDENTIFIER
::= { ciscoAdslLineCapMIB 1 }
-- ADSL ATU-C CAP Physical-Layer Parameters Table
cAdslAtucCapPhysTable OBJECT-TYPE
SYNTAX SEQUENCE OF CAdslAtucCapPhysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the adslAtucPhysTable and contains
enterprise-specific physical layer parameters for the ATU-C
class devices supported by the system."
::= { ciscoAdslLineCapMIBObjects 2 }
cAdslAtucCapPhysEntry OBJECT-TYPE
SYNTAX CAdslAtucCapPhysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of enterprise-specific physical-layer parameters for an
ATU-C class device supported by the system. There exists an
entry for each ifEntry with an ifType of adsl(94) and an
adslLineCoding of cap(3)."
INDEX { ifIndex }
::= { cAdslAtucCapPhysTable 1 }
CAdslAtucCapPhysEntry ::= SEQUENCE {
cAdslAtucCapCurrState INTEGER,
cAdslAtucCapCurrRxGain Gauge32,
cAdslAtucCapCurrRxSnr Gauge32
}
cAdslAtucCapCurrState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
idle(2), -- Administratively down.
training(3), -- Transceiver training in progress.
steadyState(4), -- Nominal mode of operation.
downloading(5), -- ATU-C code download in progress.
downloadFailed(6), -- ATU-C code download failed.
testing(7) -- Test in progress.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the state of the ATU-C transceiver.
The value of this managed is 'idle' for an ATU-C that has
been provisioned, but is not physically present in the system."
::= { cAdslAtucCapPhysEntry 1 }
cAdslAtucCapCurrRxGain OBJECT-TYPE
SYNTAX Gauge32
UNITS "tenth dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This managed object represents the gain applied to the ATU-C
receiver.
The value of this managed object is '0' for an ATU-C that has
been provisioned, but is not physically present in the system."
::= { cAdslAtucCapPhysEntry 2 }
cAdslAtucCapCurrRxSnr OBJECT-TYPE
SYNTAX Gauge32
UNITS "tenth dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This managed object represents the signal-to-noise ratio
measured across the the ATU-C receive pair.
The value of this managed object is '0' for an ATU-C that has
been provisioned, but is not physically present in the system."
::= { cAdslAtucCapPhysEntry 3 }
-- ADSL ATU-R CAP Physical-Layer Parameters Table
cAdslAturCapPhysTable OBJECT-TYPE
SYNTAX SEQUENCE OF CAdslAturCapPhysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the adslAturPhysTable and contains
enterprise-specific physical layer parameters for the ATU-R
class devices supported by the system."
::= { ciscoAdslLineCapMIBObjects 3 }
cAdslAturCapPhysEntry OBJECT-TYPE
SYNTAX CAdslAturCapPhysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of enterprise-specific physical-layer parameters for an
ATU-R class device supported by the system. There exists an
entry for each ifEntry with an ifType of adsl(94) and an
adslLineCoding of cap(3)."
INDEX { ifIndex }
::= { cAdslAturCapPhysTable 1 }
CAdslAturCapPhysEntry ::= SEQUENCE {
cAdslAturCapCurrRxGain Gauge32
}
cAdslAturCapCurrRxGain OBJECT-TYPE
SYNTAX Gauge32
UNITS "tenth dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This managed object represents the gain applied to the ATU-R
receiver.
The value of this managed object is '0' if the corresponding
ATU-C has been provisioned, but is not physically present in
the system."
::= { cAdslAturCapPhysEntry 1 }
-- ADSL ATU-C CAP Physical-Layer Statistics Table
cAdslAtucCapPerfDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF CAdslAtucCapPerfDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the adslAtucPerfDataTable and contains
enterprise-specific physical layer statistics for the ATU-C
class devices supported by the system."
::= { ciscoAdslLineCapMIBObjects 6 }
cAdslAtucCapPerfDataEntry OBJECT-TYPE
SYNTAX CAdslAtucCapPerfDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of enterprise-specific physical-layer statistics for an
ATU-C class device supported by the system. There exists an
entry for each ifEntry with an ifType of adsl(94) and an
adslLineCoding of cap(3)."
INDEX { ifIndex }
::= { cAdslAtucCapPerfDataTable 1 }
CAdslAtucCapPerfDataEntry ::= SEQUENCE {
cAdslAtucCapPerfInitFailures Counter32,
cAdslAtucCapPerfCurr15MinInitFailures PerfCurrentCount,
cAdslAtucCapPerfCurr1DayInitFailures AdslPerfCurrDayCount,
cAdslAtucCapPerfPrev1DayInitFailures AdslPerfPrevDayCount
}
cAdslAtucCapPerfInitFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of line initialization
failures relative to sysUpTime."
::= { cAdslAtucCapPerfDataEntry 1 }
cAdslAtucCapPerfCurr15MinInitFailures OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of line initialization
failures in the current 15-minute interval."
::= { cAdslAtucCapPerfDataEntry 2 }
cAdslAtucCapPerfCurr1DayInitFailures OBJECT-TYPE
SYNTAX AdslPerfCurrDayCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of line initialization
failures in the current 1-day interval."
::= { cAdslAtucCapPerfDataEntry 3 }
cAdslAtucCapPerfPrev1DayInitFailures OBJECT-TYPE
SYNTAX AdslPerfPrevDayCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of line initialization
failures in the previous 1-day interval."
::= { cAdslAtucCapPerfDataEntry 4 }
-- ADSL ATU-C CAP Physical-Layer Statistics 15-Minute Interval Table
cAdslAtucCapIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF CAdslAtucCapIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the adslAtucIntervalTable and contains
enterprise-specific physical layer statistics intervals for
the ATU-C class devices supported by the system."
::= { ciscoAdslLineCapMIBObjects 8 }
cAdslAtucCapIntervalEntry OBJECT-TYPE
SYNTAX CAdslAtucCapIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 15-minute interval of enterprise-specific physical-layer
statistics for an ATU-C class device supported by the system.
There exists up to 96 entries for each ifEntry with an ifType
of adsl(94) and an adslLineCoding of cap(3)."
INDEX { ifIndex, adslAtucIntervalNumber}
::= { cAdslAtucCapIntervalTable 1 }
CAdslAtucCapIntervalEntry ::= SEQUENCE {
cAdslAtucCapIntervalInitFailures PerfIntervalCount
}
cAdslAtucCapIntervalInitFailures OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of line initialization
failures in the interval."
::= { cAdslAtucCapIntervalEntry 1 }
-- Configuration Profile Table
cAdslLineCapConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF CAdslLineCapConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the adslLineConfProfileTable and contains
enterprise-specific ADSL line configuration information."
::= { ciscoAdslLineCapMIBObjects 14 }
cAdslLineCapConfProfileEntry OBJECT-TYPE
SYNTAX CAdslLineCapConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A configuration profile containing enterprise-specific ADSL
line configuration information."
INDEX { IMPLIED adslLineConfProfileName }
::= { cAdslLineCapConfProfileTable 1 }
CAdslLineCapConfProfileEntry ::= SEQUENCE {
cAdslLineCapConfTrainingMode INTEGER,
cAdslLineCapConfInterleaveDelay INTEGER,
cAdslLineCapConfCpeSignature INTEGER,
cAdslAtucCapConfTargetSnrMgn INTEGER,
cAdslAtucCapConfMinTxRate AdslLineCapDownstreamRate,
cAdslAtucCapConfMaxTxRate AdslLineCapDownstreamRate,
cAdslAtucCapConfDown136KBaudEnable TruthValue,
cAdslAtucCapConfUp68KBaudEnable TruthValue,
cAdslAtucCapConfUp17KBaudEnable TruthValue,
cAdslAtucCapConfPsdmLevel Integer32,
cAdslAturCapConfTargetSnrMgn INTEGER,
cAdslAturCapConfMinTxRate AdslLineCapUpstreamRate,
cAdslAturCapConfMaxTxRate AdslLineCapUpstreamRate,
cAdslAturCapConfPsdmLevel Integer32
}
cAdslLineCapConfTrainingMode OBJECT-TYPE
SYNTAX INTEGER {
standard(1),
fast(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the mode employed by the ATU-C and
ATU-R when training against each other. One of two training
modes can be employed:
- Standard
An ATU-C initiates a training sequence using the method
defined by T1E1.4/99-161R3. This training mode is the
default for ADSL modems employing the CAP line code.
- Fast
An ATU-C initiates a vendor-specific training sequence that
can possibly provide a shorter training sequence."
REFERENCE
"ANSI T1E1.4/99-161R3, Single-Carrier Rate Adaptive Digital
Subscriber Line (RADSL)."
DEFVAL { standard }
::= { cAdslLineCapConfProfileEntry 1 }
cAdslLineCapConfInterleaveDelay OBJECT-TYPE
SYNTAX INTEGER {
none(1),
short(2),
long(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the interleave delay for the
downstream channel. The value of this object specifies the
mapping (relative spacing) between subsequent input bytes at
the interleaver input and their placement in the bit stream
at the interleaver output. The value 'long' provides greater
separation between consecutive input bytes in the output bit
stream, thereby allowing for improved impulse noise immunity
at the expense of payload latency."
REFERENCE
"ANSI T1E1.4/99-161R3, Single-Carrier Rate Adaptive Digital
Subscriber Line (RADSL)."
DEFVAL { short }
::= { cAdslLineCapConfProfileEntry 2 }
cAdslLineCapConfCpeSignature OBJECT-TYPE
SYNTAX INTEGER (0..127)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the value of the minimum CPE signature
expected from ATU-R during training. The value of the CPE
signature corresponds to the software version of the ATU-R.
If the CPE signature advertised by an ATU-R is less than the
value of this object, then the ATU-C will be placed into an
idle state, thereby preventing the line from training.
In addition, the agent increments the value of the
cAdslAtucCapPerfInitFailures object for each attempt to train
by an ATU-R advertising a CPE signature less than the value of
this object. When a management client observes the value of
cAdslAtucCapPerfInitFailures increasing, it should retrieve the
value of the adslAturInvSerialNumber object (for more details,
see the ADSL-LINE-MIB) . This value of this object reflects the
CPE signature advertised by an ATU-R implementing the CAP line
code. If the CPE signature of the ATU-R is not known, the value
of the adslAturInvSerialNumber object should be a zero-length
string."
DEFVAL { 0 }
::= { cAdslLineCapConfProfileEntry 3 }
cAdslAtucCapConfTargetSnrMgn OBJECT-TYPE
SYNTAX INTEGER (0..310)
UNITS "tenth dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the target SNR margin. This is the
desired noise margin the ATU-C must achieve with a BER of
10-7 or better to successfully complete training."
DEFVAL { 60 }
::= { cAdslLineCapConfProfileEntry 4 }
cAdslAtucCapConfMinTxRate OBJECT-TYPE
SYNTAX AdslLineCapDownstreamRate
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the minimum acceptable downstream
line rate."
DEFVAL { 0 }
::= { cAdslLineCapConfProfileEntry 5 }
cAdslAtucCapConfMaxTxRate OBJECT-TYPE
SYNTAX AdslLineCapDownstreamRate
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the desired line rate which the ATU-C
will attempt to train at."
DEFVAL { 640000 }
::= { cAdslLineCapConfProfileEntry 6 }
cAdslAtucCapConfDown136KBaudEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies whether the modem can train the
downstream channel using a symbol rate of 136K symbols
per second."
REFERENCE
"ANSI T1E1.4/99-161R3, Single-Carrier Rate Adaptive Digital
Subscriber Line (RADSL)."
DEFVAL { true }
::= { cAdslLineCapConfProfileEntry 7 }
cAdslAtucCapConfUp68KBaudEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies whether the modem can train the
upstream channel using a symbol rate of 68K symbols
per second.
The value of this object does not effect whether the modem
can train at any other symbol rate; that is, the values of
this object and cAdslAtucCapConfUp17KBaudEnable are not
mutually exclusive."
REFERENCE
"ANSI T1E1.4/99-161R3, Single-Carrier Rate Adaptive Digital
Subscriber Line (RADSL)."
DEFVAL { true }
::= { cAdslLineCapConfProfileEntry 8 }
cAdslAtucCapConfUp17KBaudEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies whether the modem can train the
upstream channel using a symbol rate of 17K symbols
per second.
The value of this object does not effect whether the modem
can train at any other symbol rate; that is, the values of
this object and cAdslAtucCapConfUp68KBaudEnable are not
mutually exclusive."
REFERENCE
"ANSI T1E1.4/99-161R3, Single-Carrier Rate Adaptive Digital
Subscriber Line (RADSL)."
DEFVAL { true }
::= { cAdslLineCapConfProfileEntry 9 }
cAdslAtucCapConfPsdmLevel OBJECT-TYPE
SYNTAX Integer32 ( -52 | -49 | -46 | -43 | -40 | -37 )
UNITS "dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This managed object specifies the nominal power output of the
ATU-C across the entire transmit spectrum. Observe that this
implies the attenuation of the signal for some data rates.
This value does not take effect until the modem has retrained
against the ATU-C to which the ATU-R has a connection."
REFERENCE
"ANSI T1E1.4/99-161R3, Single-Carrier Rate Adaptive Digital
Subscriber Line (RADSL)."
DEFVAL { -40 }
::= { cAdslLineCapConfProfileEntry 10 }
cAdslAturCapConfTargetSnrMgn OBJECT-TYPE
SYNTAX INTEGER (0..310)
UNITS "tenth dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the target SNR margin. This is the
desired noise margin the ATU-R must achieve with a BER of
10-7 or better to successfully complete training."
DEFVAL { 60 }
::= { cAdslLineCapConfProfileEntry 11 }
cAdslAturCapConfMinTxRate OBJECT-TYPE
SYNTAX AdslLineCapUpstreamRate
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the minimum acceptable upstream
line rate."
DEFVAL { 0 }
::= { cAdslLineCapConfProfileEntry 12 }
cAdslAturCapConfMaxTxRate OBJECT-TYPE
SYNTAX AdslLineCapUpstreamRate
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the desired line rate which the ATU-R
will attempt to train at."
DEFVAL { 91000 }
::= { cAdslLineCapConfProfileEntry 13 }
cAdslAturCapConfPsdmLevel OBJECT-TYPE
SYNTAX Integer32 ( -53 | -50 | -47 | -44 | -41 | -38 )
UNITS "dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This managed object specifies the nominal power output of the
ATU-R across the entire transmit spectrum. Observe that this
implies the attenuation of the signal for some data rates.
This value does not take effect until the modem has retrained
against the ATU-C to which the ATU-R has a connection."
REFERENCE
"ANSI T1E1.4/99-161R3, Single-Carrier Rate Adaptive Digital
Subscriber Line (RADSL)."
DEFVAL { -38 }
::= { cAdslLineCapConfProfileEntry 14 }
-- MIB Notification Definitions
cAdslLineCapMIBNotificationsPrefix OBJECT IDENTIFIER
::= { ciscoAdslLineCapMIB 2 }
cAdslLineCapMIBNotifications OBJECT IDENTIFIER
::= { cAdslLineCapMIBNotificationsPrefix 0 }
-- MIB Conformance Statements
ciscoAdslLineCapMIBConformance OBJECT IDENTIFIER
::= { ciscoAdslLineCapMIB 3 }
ciscoAdslLineCapMIBCompliances OBJECT IDENTIFIER
::= { ciscoAdslLineCapMIBConformance 1 }
ciscoAdslLineCapMIBGroups OBJECT IDENTIFIER
::= { ciscoAdslLineCapMIBConformance 2 }
-- Compliance
ciscoAdslLineCapMIBAtucCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that implement the
CISCO-ADSL-CAP-LINE-MIB. Implementation of this MIB is
mandatory for any platform that supports one or more ADSL
line interfaces that implement the CAP line code."
MODULE -- this module
MANDATORY-GROUPS {
cAdslAtucCapBasicGroup
}
GROUP cAdslAturCapGroup
DESCRIPTION
"The implementation of this group is optional. However,
this statement recommends the implementation of this group
if the ATU-C and ATU-R support a remote management
capability."
GROUP cAdslAtucCapPM15MinIntervalGroup
DESCRIPTION
"The implementation of this group is optional."
GROUP cAdslAtucCapPM1DayIntervalGroup
DESCRIPTION
"The implementation of this group is optional."
::= { ciscoAdslLineCapMIBCompliances 1 }
ciscoAdslLineCapMIBAturCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that implement the
CISCO-ADSL-CAP-LINE-MIB and manage ADSL ATU-R class devices.
Implementation of this MIB is mandatory for any platform
that supports one or more ADSL line interfaces that implement
the CAP line code."
MODULE -- this module
MANDATORY-GROUPS {
cAdslAturBasicGroup
}
::= { ciscoAdslLineCapMIBCompliances 2 }
-- Units of Conformance
cAdslAtucCapBasicGroup OBJECT-GROUP
OBJECTS {
cAdslAtucCapCurrState,
cAdslAtucCapCurrRxGain,
cAdslAtucCapCurrRxSnr,
cAdslAtucCapPerfInitFailures,
cAdslLineCapConfTrainingMode,
cAdslLineCapConfInterleaveDelay,
cAdslLineCapConfCpeSignature,
cAdslAtucCapConfTargetSnrMgn,
cAdslAtucCapConfMinTxRate,
cAdslAtucCapConfMaxTxRate,
cAdslAtucCapConfDown136KBaudEnable,
cAdslAtucCapConfUp68KBaudEnable,
cAdslAtucCapConfUp17KBaudEnable,
cAdslAtucCapConfPsdmLevel
}
STATUS current
DESCRIPTION
"A collection of managed objects defining the basic operation
of an ATU-C implementing the CAP line code."
::= { ciscoAdslLineCapMIBGroups 1 }
cAdslAturBasicGroup OBJECT-GROUP
OBJECTS {
cAdslAturCapCurrRxGain,
cAdslLineCapConfTrainingMode,
cAdslAturCapConfTargetSnrMgn,
cAdslAturCapConfMinTxRate,
cAdslAturCapConfMaxTxRate,
cAdslAturCapConfPsdmLevel
}
STATUS current
DESCRIPTION
"A collection of managed objects defining the basic operation
of an ATU-R implementing the CAP line code."
::= { ciscoAdslLineCapMIBGroups 2 }
cAdslAturCapGroup OBJECT-GROUP
OBJECTS {
cAdslAturCapCurrRxGain,
cAdslAturCapConfTargetSnrMgn,
cAdslAturCapConfMinTxRate,
cAdslAturCapConfMaxTxRate,
cAdslAturCapConfPsdmLevel
}
STATUS current
DESCRIPTION
"A collection of managed objects defining the capability to
remotely manage a ATU-R."
::= { ciscoAdslLineCapMIBGroups 3 }
cAdslAtucCapPM15MinIntervalGroup OBJECT-GROUP
OBJECTS {
cAdslAtucCapPerfCurr15MinInitFailures,
cAdslAtucCapIntervalInitFailures
}
STATUS current
DESCRIPTION
"A collection of managed objects defining near-end performance
data collection capability using 15-minute intervals."
::= { ciscoAdslLineCapMIBGroups 4 }
cAdslAtucCapPM1DayIntervalGroup OBJECT-GROUP
OBJECTS {
cAdslAtucCapPerfCurr1DayInitFailures,
cAdslAtucCapPerfPrev1DayInitFailures
}
STATUS current
DESCRIPTION
"A collection of managed objects defining near-end performance
data collection capability using 1-day intervals."
::= { ciscoAdslLineCapMIBGroups 5 }
END

1503
snmp_mib_archive/CISCO-ADSL-DMT-LINE-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

3098
snmp_mib_archive/CISCO-ALPS-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

594
snmp_mib_archive/CISCO-ANNOUNCEMENT-MIB.my 2
View File

@ -1,594 +0,0 @@
-- *********************************************************************
-- CISCO-ANNOUNCEMENT-MIB.my:
-- Media Gateway Announcement MIB file
--
-- March 2003, Yizhong Shen
--
-- Copyright (c) 2003 by Cisco Systems, Inc.
-- All rights reserved.
--
-- *********************************************************************
CISCO-ANNOUNCEMENT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32 FROM SNMPv2-SMI
RowStatus FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
InetAddress,
InetAddressType FROM INET-ADDRESS-MIB
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
cmgwIndex FROM CISCO-MEDIA-GATEWAY-MIB
ciscoMgmt FROM CISCO-SMI;
ciscoAnnouncementMIB MODULE-IDENTITY
LAST-UPDATED "200303250000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-voice-gateway@cisco.com"
DESCRIPTION
"This MIB defines the objects for announcement
system supported on media gateway.
With announcement system setup, media gateway will
have the capability to play pre-recorded audio files.
The audio files can be played in either direction
over existing connections (calls) or towards the Time
Division Multiplexed (TDM) network on a TDM endpoint
that is terminated on the media gateway.
"
REVISION "200303250000Z"
DESCRIPTION
"Initial version of the MIB."
::= { ciscoMgmt 8888 }
ciscoAnnouncementMIBNotifs OBJECT IDENTIFIER ::=
{ ciscoAnnouncementMIB 0 }
ciscoAnnouncementMIBObjects OBJECT IDENTIFIER ::=
{ ciscoAnnouncementMIB 1}
ciscoAnnouncementMIBConformance OBJECT IDENTIFIER ::=
{ ciscoAnnouncementMIB 2}
cannoGeneric OBJECT IDENTIFIER ::=
{ ciscoAnnouncementMIBObjects 1 }
cannoControlConfig OBJECT IDENTIFIER ::=
{ cannoGeneric 1 }
cannoAudioFileConfig OBJECT IDENTIFIER ::=
{ cannoGeneric 2 }
-- *********************************************************************
--
-- Announcement Control Table
--
-- *********************************************************************
cannoControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF CannoControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MIB objects in this table are used to control
the announcement system of media gateway.
"
::= { cannoControlConfig 1 }
cannoControlEntry OBJECT-TYPE
SYNTAX CannoControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table contains the control parameters of
the announcement system on media gateway.
"
INDEX { cmgwIndex }
::= { cannoControlTable 1 }
CannoControlEntry ::=
SEQUENCE {
cannoAudioFileServerName SnmpAdminString,
cannoDnResolution INTEGER,
cannoIpAddressType InetAddressType,
cannoIpAddress InetAddress,
cannoAgeTime Unsigned32,
cannoSubDirPath SnmpAdminString,
cannoReqTimeout Unsigned32,
cannoMaxPermanent Unsigned32
}
cannoAudioFileServerName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the domain name of an announcement
file server that resides in an IP network and is reachable
from the media gateway.
The default value of this object is NULL string(size is 0).
Before using any object in this table, this object should
be configured to non NULL.
"
DEFVAL { "" }
::= { cannoControlEntry 1 }
cannoDnResolution OBJECT-TYPE
SYNTAX INTEGER{
internalOnly(1),
externalOnly(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the domain name resolution for
the domain name of the Announcement File server which is
specified by the cannoAudioFileServerName object.
If this object is set to internalOnly(1), the IP address
associated with the file server (cannoAudioFileServerName) will
be determined by the cannoIpAddress object.
"
DEFVAL { internalOnly }
::= { cannoControlEntry 2 }
cannoIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the IP address type of
cannoIpAddress.
This object is not applicable when cannoDnResolution
is set to externalOnly(2).
"
DEFVAL { ipv4 }
::= { cannoControlEntry 3 }
cannoIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the IP address associated with the
cannoAudioFileServerName.
This object is not applicable when cannoDnResolution
is set to externalOnly(2).
"
DEFVAL { '00000000'h }
::= { cannoControlEntry 4 }
cannoAgeTime OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum life-span(in minutes) of
the dynamic announcement files in the cache.
A dynamic announcement file starts aging as soon as it is
brought into the cache from the file server. When a dynamic
file age crosses the 'cannoAgeTime' threshold, the file
will be removed from the cache.
The value zero time specifies that 'cannoAgeTime' is
disabled.
"
DEFVAL { 10080 }
::= { cannoControlEntry 5 }
cannoSubDirPath OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the directory path under the default
TFTP directory in the Announcement File server for
announcement files.
The individual characters in cannoSubDirPath may be
alphanumeric characters, forward slashes, backward slashes,
periods, dashes, and underscores, but no embedded spaces.
The last character of cannoSubDirPath must not be a dash.
"
DEFVAL { "" }
::= { cannoControlEntry 6 }
cannoReqTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..50)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the time for a play announcement
request to be serviced.
The cannoReqTimeout is the time within which an
announcement must start playing after receiving announcement
request.
If the announcement system cannot start playing the
announcement within cannoReqTimeout seconds since the
request was received, the play request will be aborted.
The value zero time specifies that 'cannoReqTimeout' is
disabled.
"
DEFVAL { 5 }
::= { cannoControlEntry 7 }
cannoMaxPermanent OBJECT-TYPE
SYNTAX Unsigned32 (0..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum number of permanent
announcement files that can be added to the media gateway.
The space on media gateway cache is reserved for the
cannoMaxPermanent number of permanent announcement files
and the permanent announcement files should be stored on media
gateway cache forever until to be deleted.
The value zero specifies that media gateway only support
dynamic announcement file.
"
DEFVAL { 41 }
::= { cannoControlEntry 8 }
-- *********************************************************************
--
-- Announcement AUDIO File Table
--
-- *********************************************************************
cannoAudioFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF CannoAudioFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MIB objects in this table contain information to
manage audio announcement files.
"
::= { cannoAudioFileConfig 1 }
cannoAudioFileEntry OBJECT-TYPE
SYNTAX CannoAudioFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in the cannoAudioFileTable consists of
management information for a specific announcement file,
which include file descriptor, name, type, age, duration,
number of cycles, status.
"
INDEX { cmgwIndex, cannoAudioFileNumber }
::= { cannoAudioFileTable 1 }
CannoAudioFileEntry ::=
SEQUENCE {
cannoAudioFileNumber Unsigned32,
cannoAudioFileDescr SnmpAdminString,
cannoAudioFileName SnmpAdminString,
cannoAudioFileStatus INTEGER,
cannoAudioFileOperStatus INTEGER,
cannoAudioFilePlayNoc Unsigned32,
cannoAudioFileDuration Unsigned32,
cannoAudioFileType INTEGER,
cannoAudioFileAge Unsigned32,
cannoAudioFileAdminDeletion INTEGER,
cannoAudioFileRowStatus RowStatus
}
cannoAudioFileNumber OBJECT-TYPE
SYNTAX Unsigned32 (1..9999)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique index to identify announcement file
to be used in media gateway.
"
::= { cannoAudioFileEntry 1 }
cannoAudioFileDescr OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A textual string containing information about the
audio file.
User can store any information to this object such as
which customer using this audio file, usage of the
audio file, etc..
"
::= { cannoAudioFileEntry 2 }
cannoAudioFileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the name of a valid announcement file
which has been stored in cannoAudioFileTable. This file name
may include path or subdirectory information.
The individual characters in this name may be alphanumeric
characters, forward slashes, backward slashes, periods,
dashes, and underscores, but no embedded spaces. The last
character of the name must not be a dash or a forward slash.
"
::= { cannoAudioFileEntry 3 }
cannoAudioFileStatus OBJECT-TYPE
SYNTAX INTEGER{
cached (1),
loading (2),
invalidFile (3),
loadFailed (4),
notCached (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the status of the the audio file:
cached (1): the file successfully downloaded to media
gateway cache
cache is the memory on media gateway which
is used to store announcement files.
loading (2): the file in process of downloading
invalidFile(3): the file on Announcement File server is too
large or corrupted
loadFailed (4): timeout when trying to download the file
notCached (5): the file is not in cache
Note:
The cache is the memory on media gateway which is used to
store announcement files. Some of space on the cache is
reserved for the permanent announcement files (refer to
'cannoMaxPermanent'), the rest of cache is for the
dynamic announcement files.
The 'notCached' is applicable only for the dynamic
announcement files in the following cases:
1. The dynamic file age reaches to 'cannoAgeTime', the
status of the file will be changed from 'cached' to
'notCached'.
2. If the cache is full for the dynamic files, and if user
try to add a new dynamic file, the one of the dynamic
files on cache will be removed by LRU algorithm. The
status of that file will be changed from 'cached' to
'notCached'.
3. If there is no space for the dynamic files (whole cache
is reserved for the permanent file), the status of the
dynamic files is set to 'notCached'.
"
::= { cannoAudioFileEntry 4 }
cannoAudioFileOperStatus OBJECT-TYPE
SYNTAX INTEGER{
inPlaying (1),
notPlaying (2),
delPending (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current operational status of
the entry:
inPlaying (1): the file is in playing
notPlaying (2): the file is not in playing
delPending (3): deletion is pending because the file is
in playing
"
::= { cannoAudioFileEntry 5 }
cannoAudioFilePlayNoc OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies number of cycles the announcement file
is played.
This object is used only when the Play Announcement signal
from the MGC does not include a 'cannoAudioFilePlayNoc'
parameter.
The value zero is used to represent an announcement that
continuously plays or loops.
"
DEFVAL { 1 }
::= { cannoAudioFileEntry 6 }
cannoAudioFileDuration OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "10 milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the duration to play the
announcement for one cycle, it is applicable only for the
fixed announcement play.
This object is used only when the Play Announcement signal
from the MGC does not include a 'cannoAudioFileDuration'
parameter.
For the fixed announcement play, the 'cannoAudioFilePlayNoc'
and the 'cannoAudioFileDuration' are used together to
determine how long the announcement is to be played.
The value zero indicates that this is a variable announcement
play and only the 'cannoAudioFilePlayNoc' is used to determine
the play time.
"
DEFVAL { 0 }
::= { cannoAudioFileEntry 7 }
cannoAudioFileType OBJECT-TYPE
SYNTAX INTEGER{
dynamic (1),
permanent (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies announcement file type.
dynamic(1) : Dynamic file can be removed from cache if
file age(cannoAudioFileAge) reaches cannoAgeTime
or according to LRU algorithm when cache is full
permanent(2): Permanent file should be stored on cache forever
except to be deleted.
The max number of permanent file can be stored on
cache is determined by cannoMaxPermanent.
"
DEFVAL { dynamic }
::= { cannoAudioFileEntry 8 }
cannoAudioFileAge OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates that announcement file age in cache, it
is only for dynamic file.
A dynamic announcement file starts aging as soon as it
is brought into the cache from the Announcement File server.
When the 'cannoAudioFileAge' reach to 'cannoAgeTime', then
the file will be removed from cache.
This object is not applicable for two cases:
(1)For the permanent files, because the the permanent files
should be stored on cache forever except to be deleted.
(2)The 'cannoAgeTime' is set to zero which means the
cannoAgeTime is infinite and 'cannoAudioFileAge' can never
reach the cannoAgeTime.
"
::= { cannoAudioFileEntry 9 }
cannoAudioFileAdminDeletion OBJECT-TYPE
SYNTAX INTEGER{
gracefully (1),
forcefully (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies entry deletion behavior:
gracefully(1): gateway will not stop the current announcement
file playing (till it completes) while deleting
this entry.
forcefully(2): gateway will immediately stop current
announcement file playing while deleting this
entry
"
DEFVAL { gracefully }
::= { cannoAudioFileEntry 10 }
cannoAudioFileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create or delete an entry.
The mandatory objects for creating an entry in this table:
'cannoAudioFileName'
The following objects are not allowed to be modified after
the entry to be added:
'cannoAudioFileName'
'cannoAudioFileType'
"
::= { cannoAudioFileEntry 11 }
-- *********************************************************************
-- Conformance
-- *********************************************************************
cannoMIBCompliances OBJECT IDENTIFIER ::=
{ ciscoAnnouncementMIBConformance 1}
cannoMIBGroups OBJECT IDENTIFIER ::=
{ ciscoAnnouncementMIBConformance 2}
--
-- Conformance and compliance statements statements
--
cannoMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
" The compliance statement for Announcement File"
MODULE -- this module
MANDATORY-GROUPS { cannoControlGroup,
cannoAudioFileGroup
}
::= { cannoMIBCompliances 1 }
--
-- units of conformance
--
-- MIB Groups
--
cannoControlGroup OBJECT-GROUP
OBJECTS {
cannoAudioFileServerName,
cannoDnResolution,
cannoIpAddressType,
cannoIpAddress,
cannoAgeTime,
cannoSubDirPath,
cannoReqTimeout,
cannoMaxPermanent
}
STATUS current
DESCRIPTION
"This group contains objects related to announcement
system control on media gateway.
"
::= { cannoMIBGroups 1 }
cannoAudioFileGroup OBJECT-GROUP
OBJECTS {
cannoAudioFileDescr,
cannoAudioFileName,
cannoAudioFileStatus,
cannoAudioFileOperStatus,
cannoAudioFilePlayNoc,
cannoAudioFileDuration,
cannoAudioFileType,
cannoAudioFileAge,
cannoAudioFileAdminDeletion,
cannoAudioFileRowStatus
}
STATUS current
DESCRIPTION
"This group contains objects related to announcement
files on media gateway.
"
::= { cannoMIBGroups 2 }
END

1008
snmp_mib_archive/CISCO-AON-STATUS-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

541
snmp_mib_archive/CISCO-APPLIANCE-REDUNDANCY-MIB.my 2
View File

@ -1,541 +0,0 @@
CISCO-APPLIANCE-REDUNDANCY-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
NOTIFICATION-TYPE,
OBJECT-TYPE,
Counter32,
Unsigned32
FROM SNMPv2-SMI
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB
InterfaceIndexOrZero
FROM IF-MIB
DateAndTime,
TruthValue,
TimeInterval,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
ciscoMgmt
FROM CISCO-SMI;
ciscoApplianceRedundancyMIB MODULE-IDENTITY
LAST-UPDATED "200412230000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wlse@cisco.com"
DESCRIPTION
"This mib defines the SNMP objects to report the status of
High Availability (HA) functionality in Cisco network
management appliance devices. The HA functinality is
achieved via the redundancy of network management appliance
devices.
An network management appliance is a device which combines
hardware and software to provide specific network management
services. Cisco WLSE, Wireless Service Engine (WLSE) is such
an appliance.
The High Availability is achieved via redundancy of
appliances. This redundancy scheme is designed to support
hardware or software failure of the appliances in a non-
disruptive manner. Redundancy is achieved by configuring
a cluster of two appliances with one common virtual IP
address. The data is mirrored from the active appliance to
the standby appliance at regular intervals.
One of the appliances is in active mode, performing all
normal functions. The other appliance is in warm standby
mode; that is, the appliance is up but no application
services are running.
Both the active and standby appliances have their own IP
addresses. The active appliance also owns the virtual IP
address to which all the service requests are made.
The active appliance and standby appliance periodically poll
each other. If the standby appliance cannot reach the active
appliance, it will become the active appliance. This is
called a switchover event. The switchover can be caused by
other causes, for example, via user commands.
Both the active and standby appliances should implement
this MIB and report any exceptions caused by switchover
events."
::= { ciscoMgmt 458 }
ciscoApplRedundancyMIBObjects OBJECT IDENTIFIER
::= { ciscoApplianceRedundancyMIB 1 }
carConfigObjects OBJECT IDENTIFIER
::= { ciscoApplRedundancyMIBObjects 1 }
carSwitchOverObjects OBJECT IDENTIFIER
::= { ciscoApplRedundancyMIBObjects 2 }
-- Textual Conventions
CarRedundancyState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"States of the HA redundancy:
notConfigured - The appliance is not configured for
redundancy.
starting - The appliance is configured for redundancy
and is initializing. This state could
apply to both active and standby
appliances.
active - The appliance is the active appliance.
preStandby - The appliance is configured to be
standby and is attempting to restore
data from the active appliance and is not
yet in the standby mode.
standby - The appliance is warm standby mode.
activeLostStandby - The active appliance is not getting any
response from the standby appliance.
activeLostNetwork - The active appliance is not getting any
response from the standby appliance or
from the default gateway. There is
possibly network issue.
standbyLostNetwork - The standby appliance is not getting any
response from the active appliance or
from the default gateway. There is
possibly network issue."
SYNTAX INTEGER {
notConfigured (1),
starting (2),
active (3),
preStandby (4),
standby (5),
activeLostStandby (6),
activeLostNetwork (7),
standbyLostNetwork (8)
}
CarSwitchOverReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Cause of HA switchover event.
lossConnWithActive - Switchover is caused by loss of
connectivity to active appliance.
forcedSwitchOver - Switchover is caused by user command.
unknown - Unknown reason."
SYNTAX INTEGER {
lossConnWithActive(1),
forcedSwitchOver(2),
unknown(3)
}
-- HA Device Configuration data
carRedundancySyncInterval OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval at which the active and standby appliances
are synchronized. Synchronization consists of incrementally
backing up the data on the active appliance and restoring
on the standby appliance."
::= { carConfigObjects 1 }
carRedundancyCheckInterval OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval to check the availability status of each
appliance. Both the active and standby appliances will
check the status of each other in this time interval.
If the standby appliance is not able to connect to the
active appliance during this check, it will become the
active appliance."
::= { carConfigObjects 2 }
carRedundancyState OBJECT-TYPE
SYNTAX CarRedundancyState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The HA redundancy state of this appliance device."
DEFVAL { notConfigured }
::= { carConfigObjects 3 }
carNotificationEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable HA switchover event notifications via SNMP."
DEFVAL { false }
::= { carConfigObjects 4 }
carHAAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF CarHAAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table keeps the current configuration of the address
information of the active and standby appliances. There is an
entry in this table corresponding to each network interface
that is configured for redundancy. Thus, the number of
entries in this table corresponds to the number of interfaces
configured for redundancy."
::= { carConfigObjects 5 }
carHAAddressEntry OBJECT-TYPE
SYNTAX CarHAAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing address information for HA configuration
on a network interface."
INDEX { carHAAddrTableIndex }
::= { carHAAddressTable 1 }
CarHAAddressEntry::=
SEQUENCE {
carHAAddrTableIndex InterfaceIndexOrZero,
carVirtualAddressType InetAddressType,
carVirtualAddress InetAddress,
carMyAddressType InetAddressType,
carMyAddress InetAddress,
carPeerAddressType InetAddressType,
carPeerAddress InetAddress
}
carHAAddrTableIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index matches the interface number for which the Virtual
IP configuration is maintained. For example, the Virtual IP
configured on interface eth0 will be index 0. Entry for eth1
will be index 1,... and so on."
::= { carHAAddressEntry 1 }
carVirtualAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of address stored in carVirtualAddress."
::= { carHAAddressEntry 2 }
carVirtualAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The virtual IP address configured for this interface. The type
of this mib variable is defined in carVirtualAddressType.
This address binds to the active appliance at all times.
All the management requests should be made to this address."
::= { carHAAddressEntry 3 }
carMyAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of address stored in carMyAddress"
::= { carHAAddressEntry 4 }
carMyAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the interface configured for this HA
configuration in this appliance. The type of this mib variable
is defined in carMyAddressType. Note this value will not be
affected by switchover events."
::= { carHAAddressEntry 5 }
carPeerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of address stored in carPeerAddress"
::= { carHAAddressEntry 6 }
carPeerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the interface configured for this HA
configuration in the peer appliance. The type of this mib
variable is defined in carPeerAddressType. Note this value
will not be affected by switchover events."
::= { carHAAddressEntry 7 }
-- HA SwitchOver data
carLastSwitchOverReason OBJECT-TYPE
SYNTAX CarSwitchOverReason
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cause for the most recent switchover."
::= { carSwitchOverObjects 1 }
carLastSwitchOverTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local date and time when the last switchover event
occurred and was logged to the system."
::= { carSwitchOverObjects 2 }
carTotalSwitchOvers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all HA switchover events."
::= { carSwitchOverObjects 3 }
carMaxSwitchOverHistoryRecords OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximun number of records to keep in
carSwitchOverHistoryTable. New records will replace the old
records on a first-in-first-out basis.
A value of 0 indicates no history will be retained."
DEFVAL { 20 }
::= { carSwitchOverObjects 4 }
carSwitchOverHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CarSwitchOverHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table keeps an history of HA switchover
events. The maximum number of records is equal
or less than carMaxSwitchOverRecords."
::= { carSwitchOverObjects 5 }
carSwitchOverHistEntry OBJECT-TYPE
SYNTAX CarSwitchOverHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information about a HA switchover event."
INDEX { carSWHistTableIndex }
::= { carSwitchOverHistoryTable 1 }
CarSwitchOverHistEntry::=
SEQUENCE {
carSWHistTableIndex Unsigned32,
carSWHistActiveNodeAddressType InetAddressType,
carSWHistActiveNodeAddress InetAddress,
carSWHistStandbyNodeAddressType InetAddressType,
carSWHistStandbyNodeAddress InetAddress,
carSWHistEventTime DateAndTime,
carSWHistEventReason CarSwitchOverReason
}
carSWHistTableIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An monotonically increasing number for the sole purpose
of indexing entries. When it reaches maximum value, the agent
sets it back to 1."
::= { carSwitchOverHistEntry 1 }
carSWHistActiveNodeAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the type of address stored in
carSWHistActiveNodeAddress."
::= { carSwitchOverHistEntry 2 }
carSWHistActiveNodeAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the active appliance after the switchover
event. carSWHistActiveNodeAddressType specifies the type of
this mib variable."
::= { carSwitchOverHistEntry 3 }
carSWHistStandbyNodeAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the type of address stored in
carSWHistStandbyNodeAddress."
::= { carSwitchOverHistEntry 4 }
carSWHistStandbyNodeAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the standby appliance after the switchover
event. carSWHistStandbyNodeAddressType specifies the type
of this mib variable."
::= { carSwitchOverHistEntry 5 }
carSWHistEventTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local date and time when the switchover event occurred
and was logged to the system."
::= { carSwitchOverHistEntry 6 }
carSWHistEventReason OBJECT-TYPE
SYNTAX CarSwitchOverReason
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cause of the switchover event."
::= { carSwitchOverHistEntry 7 }
-- Notifications
carHAMIBNotifPrefix OBJECT IDENTIFIER
::= { ciscoApplianceRedundancyMIB 2 }
carHAMIBNotifications OBJECT IDENTIFIER
::= { carHAMIBNotifPrefix 0 }
carSwitchOverNotification NOTIFICATION-TYPE
OBJECTS {
carSWHistEventTime,
carSWHistEventReason,
carSWHistActiveNodeAddressType,
carSWHistActiveNodeAddress,
carSWHistStandbyNodeAddressType,
carSWHistStandbyNodeAddress
}
STATUS current
DESCRIPTION
"This notification is sent when a switchover event happened.
This notification can be enabled or disabled via
carNotificationEnabled."
::= { carHAMIBNotifications 1 }
-- conformance
ciscoHAMIBConformance OBJECT IDENTIFIER
::= { ciscoApplianceRedundancyMIB 3 }
ciscoHAMIBCompliances OBJECT IDENTIFIER
::= { ciscoHAMIBConformance 1 }
ciscoHAMIBGroups OBJECT IDENTIFIER
::= { ciscoHAMIBConformance 2 }
-- compliance
ciscoHAMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
CISCO-APPLIANCE-HIGH-AVAILABILITY-MIB."
MODULE -- This module
MANDATORY-GROUPS {
ciscoHAConfigDataGroup,
ciscoHASwitchOverDataGroup
}
GROUP ciscoHAExceptionNotifGroup
DESCRIPTION
"This group is optional."
::= { ciscoHAMIBCompliances 1 }
-- Units of conformance
ciscoHAConfigDataGroup OBJECT-GROUP
OBJECTS {
carVirtualAddressType,
carVirtualAddress,
carMyAddressType,
carMyAddress,
carPeerAddressType,
carPeerAddress,
carRedundancySyncInterval,
carRedundancyCheckInterval,
carRedundancyState,
carNotificationEnabled
}
STATUS current
DESCRIPTION
"A collection of objects that enable the switchover event
notification for the HA network elements."
::= { ciscoHAMIBGroups 1 }
ciscoHASwitchOverDataGroup OBJECT-GROUP
OBJECTS {
carLastSwitchOverReason,
carLastSwitchOverTime,
carTotalSwitchOvers,
carMaxSwitchOverHistoryRecords,
carSWHistActiveNodeAddressType,
carSWHistActiveNodeAddress,
carSWHistStandbyNodeAddressType,
carSWHistStandbyNodeAddress,
carSWHistEventTime,
carSWHistEventReason
}
STATUS current
DESCRIPTION
"A collection of objects that record the switchover events
for HA network elements."
::= { ciscoHAMIBGroups 2 }
ciscoHAExceptionNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
carSwitchOverNotification
}
STATUS current
DESCRIPTION
"A collection of the monitored exception events."
::= { ciscoHAMIBGroups 3 }
END

0
snmp_mib_archive/CISCO-APPLICATION-ACCELERATION-CAPABILITY.my
View File

0
snmp_mib_archive/CISCO-APPLICATION-ACCELERATION-CAPABILITY.my 2
View File

526
snmp_mib_archive/CISCO-APPLICATION-ACCELERATION-MIB.my 2
View File

@ -1,526 +0,0 @@
-- *********************************************************************
-- CISCO-APPLICATION-ACCELERATION-MIB: Mib for Application Acceleration
-- Entities
--
-- October 2006, Manohar Hungund
--
-- Copyright (c) 2006 by Cisco Systems, Inc.
-- All rights reserved.
--
-- *********************************************************************
CISCO-APPLICATION-ACCELERATION-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
InetPortNumber
FROM INET-ADDRESS-MIB
DateAndTime,
TruthValue,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoApplicationAccelerationMIB MODULE-IDENTITY
LAST-UPDATED "200610300000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-avs@cisco.com"
DESCRIPTION
"This is a MIB for managing Application Acceleration System(s).
This MIB includes instrumentation for providing the
performance statistics and status of the condenser which is
the core of the Application Acceleration System.
A condenser is a software accelerator that applies several
optimization techniques to accelerate Web application access.
The condenser application accelerates and optimizes any HTML or
XML-based application over HTTP resulting in response
time improvements and decrease in bandwidth requirements.
This application shall reside in a content switching module or
appliance.
Acronyms and terminology:
HTTP
In this MIB it refers to both secure ('HTTPS') as
well as non-secure ('HTTP') web traffic.
IMS
If-Modified-Since is an HTTP request type.
The If-Modified-Since request-header field
is used with a method to make it
conditional: if the requested variant has not
been modified since the time specified in this field,
an entity will not be returned from the server; instead,
a '304' ('not modified') response will be returned without
any message-body.
Delta
It is the ability of condenser to dynamically
update client browser caches directly
with content differences, or deltas,
resulting in faster page downloads.
FlashForward
FlashForward is a object acceleration technology that
eliminates network delays associated with embedded cacheable
web objects such as images, style sheets, JavaScript files, etc.
FlashForward object acceleration places the responsibility for
validating object freshness on the condenser, rather than on
the client, making it more efficient. With FlashForward, the
client never needs to validate the freshness of browser-cached
objects with the origin server, thus significantly accelerating
page downloads, and reducing both upstream and downstream
traffic associated with object validation requests.
Transformation
It is the change applied on the incoming
web traffic, as part of specific
optimization method like delta or
flashforward, to achieve web traffic
acceleration.
Objects
All the non-textual embedded components of a web
page are referred to as Objects in this MIB.
Condensable
It refers to all objects that can be subjected
to optimization by condenser.
Non-Condensable
It refers to all objects that cannot be
subjected to optimization by condenser.
REFERENCE
[1] Hypertext Transfer Protocol -- HTTP/1.1, RFC 2616
Section 14.25 If-Modified-Since.
"
REVISION "200610300000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 594 }
caaMIBNotifications OBJECT IDENTIFIER
::= { ciscoApplicationAccelerationMIB 0 }
caaMIBObjects OBJECT IDENTIFIER
::= { ciscoApplicationAccelerationMIB 1 }
caaMIBConformance OBJECT IDENTIFIER
::= { ciscoApplicationAccelerationMIB 2 }
caaStats OBJECT IDENTIFIER
::= { caaMIBObjects 1 }
caaNotificationObjects OBJECT IDENTIFIER
::= { caaMIBObjects 2 }
-- Textual Conventions
CaaState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention provides the current state of the
condenser. The semantics are as follows.
'active' : condenser is running and serving HTTP requests.
'impaired' : condenser is running, but not serving any
HTTP requests.
'down' : condenser is not running."
SYNTAX INTEGER {
active(1),
impaired(2),
down(3)
}
caaStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF CaaStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the information about the
performance related statistics and the status
of the condenser on this system. An entry is added
to this system automatically by the agent when
the system boots up. "
::= { caaStats 1 }
caaStatEntry OBJECT-TYPE
SYNTAX CaaStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in caaStatTable and corresponds to the performance
statistics and status of a condenser on the system."
INDEX { caaPort }
::= { caaStatTable 1 }
CaaStatEntry ::= SEQUENCE {
caaPort InetPortNumber,
caaState CaaState,
caaRequests Counter32,
caaNoncondensableRequests Counter32,
caaRequestedObjectSize Counter32,
caaFinalResponseSize Counter32,
caaLastRestartedTime DateAndTime,
caaTransformed Counter32,
caaUntransformed Counter32,
caaTransformedObjectRequests Counter32,
caaTransformedObjectIMSRequests Counter32,
caaStaticObjectHits Counter32,
caaStaticObjectHitSize Counter32,
caaStaticObjectMisses Counter32,
caaStaticObjectMissSize Counter32,
caaRefreshHits Counter32,
caaIMSHits Counter32,
caaIMSMisses Counter32,
caaDirectRequests Counter32,
caaRequestSize Counter32,
caaDeltaAbandons Counter32
}
caaPort OBJECT-TYPE
SYNTAX InetPortNumber (1..65535 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the port on which the condenser
listens."
::= { caaStatEntry 1 }
caaState OBJECT-TYPE
SYNTAX CaaState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the current state of
the condenser."
::= { caaStatEntry 2 }
caaRequests OBJECT-TYPE
SYNTAX Counter32
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of end-user
HTTP requests the condenser has received."
::= { caaStatEntry 3 }
caaNoncondensableRequests OBJECT-TYPE
SYNTAX Counter32
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of end-user
HTTP requests the condenser has received, that cannot
be optimized."
::= { caaStatEntry 4 }
caaRequestedObjectSize OBJECT-TYPE
SYNTAX Counter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the accumulated size (in bytes)
of each end-user requested object."
::= { caaStatEntry 5 }
caaFinalResponseSize OBJECT-TYPE
SYNTAX Counter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the accumulated size (in bytes)
of each responses, both for condensable and non-condensable
end-user HTTP request."
::= { caaStatEntry 6 }
caaLastRestartedTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the time when the
condenser was last started."
::= { caaStatEntry 7 }
caaTransformed OBJECT-TYPE
SYNTAX Counter32
UNITS "transformations"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of successful
transformations for FlashForward Objects."
::= { caaStatEntry 8 }
caaUntransformed OBJECT-TYPE
SYNTAX Counter32
UNITS "transformations"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of unsuccessful
transformations for FlashForward Objects."
::= { caaStatEntry 9 }
caaTransformedObjectRequests OBJECT-TYPE
SYNTAX Counter32
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of HTTP
requests (excluding the IMS requests) for the transformed
FlashForward objects."
::= { caaStatEntry 10 }
caaTransformedObjectIMSRequests OBJECT-TYPE
SYNTAX Counter32
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of IMS requests
for those transformed FlashForward objects."
::= { caaStatEntry 11 }
caaStaticObjectHits OBJECT-TYPE
SYNTAX Counter32
UNITS "cache-hits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of cacheable objects
served from the cache, excluding the '304'
('not modified') replies."
::= { caaStatEntry 12 }
caaStaticObjectHitSize OBJECT-TYPE
SYNTAX Counter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the accumulated size (in bytes)
of the cacheable objects served from the cache,
excluding '304' ('not modified') replies."
::= { caaStatEntry 13 }
caaStaticObjectMisses OBJECT-TYPE
SYNTAX Counter32
UNITS "cache-misses"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of cacheable
objects not found in the cache."
::= { caaStatEntry 14 }
caaStaticObjectMissSize OBJECT-TYPE
SYNTAX Counter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the accumulated size (in bytes)
of the cacheable objects not found in the cache."
::= { caaStatEntry 15 }
caaRefreshHits OBJECT-TYPE
SYNTAX Counter32
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of requests for
stale objects that have the responses from the origin
server as 'not modified'."
::= { caaStatEntry 16 }
caaIMSHits OBJECT-TYPE
SYNTAX Counter32
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of IMS requests
for valid copies of objects in the cache."
::= { caaStatEntry 17 }
caaIMSMisses OBJECT-TYPE
SYNTAX Counter32
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of IMS requests
for objects that either do not exist or are stale in
the cache."
::= { caaStatEntry 18 }
caaDirectRequests OBJECT-TYPE
SYNTAX Counter32
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of
non-cacheable object requests."
::= { caaStatEntry 19 }
caaRequestSize OBJECT-TYPE
SYNTAX Counter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the accumulated size (in bytes)
of each requests, both for condensable and non-condensable."
::= { caaStatEntry 20 }
caaDeltaAbandons OBJECT-TYPE
SYNTAX Counter32
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of abandons of
delta optimization requests."
::= { caaStatEntry 21 }
-- *************************************************************
-- * *
-- * Notifications
-- * *
-- *************************************************************
caaStateChangeNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the status of generation of the
caaStateChange notification in response to a change in
the state of condenser. A value of 'true' indicates
that the notification generation is enabled and the
caaStateChange notification is to be generated when the
state changes. A value of 'false' indicates that the
notification generation is disabled. "
DEFVAL { false }
::= { caaNotificationObjects 1 }
caaStateChange NOTIFICATION-TYPE
OBJECTS { caaState }
STATUS current
DESCRIPTION
"This object represents the notification to be generated
when a condenser undergoes a state change. caaState represents
the new state of the condenser."
::= { caaMIBNotifications 1 }
-- Compliance statements
caaMIBCompliances OBJECT IDENTIFIER
::= { caaMIBConformance 1 }
caaMIBGroups OBJECT IDENTIFIER
::= { caaMIBConformance 2 }
caaMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the SNMP entities
that implement the ciscoApplicationAccelerationMIB
module. "
MODULE -- this module
MANDATORY-GROUPS {
caaMIBStatsGroup,
caaMIBNotificationsGroup,
caaMIBNotifObjectGroup
}
::= { caaMIBCompliances 1 }
-- Units of Conformance
caaMIBStatsGroup OBJECT-GROUP
OBJECTS {
caaState,
caaRequests,
caaNoncondensableRequests,
caaRequestedObjectSize,
caaFinalResponseSize,
caaLastRestartedTime,
caaTransformed,
caaUntransformed,
caaTransformedObjectRequests,
caaTransformedObjectIMSRequests,
caaStaticObjectHits,
caaStaticObjectHitSize,
caaStaticObjectMisses,
caaStaticObjectMissSize,
caaRefreshHits,
caaIMSHits,
caaIMSMisses,
caaDirectRequests,
caaRequestSize,
caaDeltaAbandons
}
STATUS current
DESCRIPTION
"This collection of objects represent the
performance statistics for a condenser."
::= { caaMIBGroups 1 }
caaMIBNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS { caaStateChange }
STATUS current
DESCRIPTION
"This collection of objects represent the
notifications generated by the system to
provide information about the condensers."
::= { caaMIBGroups 2 }
caaMIBNotifObjectGroup OBJECT-GROUP
OBJECTS { caaStateChangeNotifEnabled }
STATUS current
DESCRIPTION
"This collection of objects represent the
information carried by those condenser-related
notifications generated by the system."
::= { caaMIBGroups 3 }
END

1009
snmp_mib_archive/CISCO-APS-EXT-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

1466
snmp_mib_archive/CISCO-APS-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

4156
snmp_mib_archive/CISCO-ASN-GATEWAY-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

467
snmp_mib_archive/CISCO-ASPP-MIB.my 2
View File

@ -1,467 +0,0 @@
-- *****************************************************************
-- CISCO-ASPP-MIB.my: Asynchronous Security Poll Protocols.
--
-- May 1996, Andrew R. Rothwell.
-- October 2002, Michael Belscher
--
-- Copyright (c) 1996-1997, 2003 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-ASPP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
ifIndex
FROM IF-MIB
TruthValue
FROM SNMPv2-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoAsppMIB MODULE-IDENTITY
LAST-UPDATED "200302100000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-poll-async@cisco.com"
DESCRIPTION
"The ASPP MIB provides the configuration and operational
information on asynchronous polled protocols such as the
asynchronous security protocols that alarm monitoring
companies use. The protocols are handled in passthrough
mode. ASPP will handle the receiving and sending of the
asychronous blocks. It will not perform any error
checking. It is the responsibilty of the end-station to
perform any required error recovery. A generic protocol
has been created to support asychronous protocols. In
some situations this doesn't work for all types since
there is no alarm protocol standard. Specific vendor
support has been included for the following vendor's
alarm equipment and protocols:
* adplex
* adt
- PollSelect
- VariPoll
* diebold
* mdi
* mosec (mosler)
* gddb (Guang Dong Development Bank)
- This protocol is similar to Burroughs Poll/Select
The following example configuration shows how the
ASPP MIB returns ASPP information, from either CISCO A
or CISCO B.
Security == ASP == Cisco == IP == Cisco == ASP == Alarm
control A Network B Panel
station
The following entities are managed:
1) ASPP ports (serial interfaces)
The ASPP ports are identified by the interface index,
and additional information about this interface can be
obtained from the Cisco Serial Interface MIB."
REVISION "200302100000Z"
DESCRIPTION
"Added Asynchronous Point of Sale(POS) to IP conversion
support.
The APOS protocol utilizes asynchrounous communications
with 1 start, 1 stop and 7 data bits with even
parity. The connection to the POS terminal will always
be an asynchronous leased line. The protocol has many
characteristics of BSC except it is simplified to
minimize overhead on the point to point connection.
The added APOS traffic will be locally acknowledged
unlike the other polled asynchronous protocol which
function in passthrough mode.
The LRC/VRC will be verified and any necessary recovery
will be done by the router.
This is necessary since we are converting the protocol
so the data can be passed to an IP attached host."
REVISION "9508210000Z"
DESCRIPTION
"Initial mib for async security polled protocols."
::= { ciscoMgmt 55 }
asppObjects OBJECT IDENTIFIER ::= { ciscoAsppMIB 1}
asppPorts OBJECT IDENTIFIER ::= { asppObjects 1}
-- *********************************************************************
-- * Aspp Port Table
-- *********************************************************************
asppPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AsppPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of asynchronous interfaces which have been
configured to support an asynchronous security protocol
(ASP) BSTUN group."
::= { asppPorts 1 }
asppPortEntry OBJECT-TYPE
SYNTAX AsppPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Current ASP configuration settings for an asynchronous
port."
INDEX { ifIndex }
::= { asppPortTable 1 }
AsppPortEntry ::=
SEQUENCE {
asppPortProtocol INTEGER,
asppPortRole INTEGER,
asppPortReceiveInterFrameTimeout Integer32,
asppPortDeviceAddressOffset Integer32,
asppPortEOFCharacter Integer32,
asppPortSOFCharacter Integer32,
asppPortIgnoreSequenceNumber TruthValue,
asppPortRspTimer Integer32,
asppPortRxTimer Integer32,
asppPortHostTimer Integer32,
asppPortConnectTimer Integer32,
asppPortRetryCount Integer32,
asppPortDelayEnq Integer32,
asppPortDisableEnq TruthValue,
asppPortSendAck TruthValue,
asppPortDirect TruthValue,
asppPortDCDAlways TruthValue
}
asppPortProtocol OBJECT-TYPE
SYNTAX INTEGER {
adplex(1),
adtPollSelect(2),
adtVariPoll(3),
diebold(4),
asyncGeneric(5),
mdi(6),
mosec(7),
gddb(8),
apos(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies type of asynchronous security protocol being
used. These protocols are implemented by individual
security alarm manufacturers. There is no standard
protocol for alarm communications over RS-232
interfaces.
asyncGeneric(5)- provides generic polled asynchronous
support
Specific vendor support has been included for the
following vendor's alarm equipment and protocols:
* adplex(1)
* ADT
- adtPollSelect(2)
- adtVariPoll(3)
* diebold(4)
* mdi(6)
* mosec(7)
- mosler equipment
* gddb(8)
- Guang Dong Development Bank
The protocol is similar to Burroughs
Poll/Select.
apos(9) - Protocol support for asynchronous POS
devices for provide credit and debit card
authorizations to an IP attached host."
::= { asppPortEntry 1 }
asppPortRole OBJECT-TYPE
SYNTAX INTEGER { primary(1), secondary(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the router's protocol role.
primary(1) - Indicates we are attaching to the terminal
or alarm panel.
secondary(2) - Indicates we are attaching to the host
or alarm console.."
::= { asppPortEntry 2 }
asppPortReceiveInterFrameTimeout OBJECT-TYPE
SYNTAX Integer32 (0..1000)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the receive inter-frame-timeout period, used
to delimit frames. Since all the protocols are
implemented over RS-232 3-wire circuits (ie TX, RX and
GND), the only general method for start-end frame
detection is to monitor the time between received
characters. If this time period exceeds the inter-frame
timeout value, then frame end-start is detected."
::= { asppPortEntry 3 }
asppPortDeviceAddressOffset OBJECT-TYPE
SYNTAX Integer32 (0..255)
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the byte offset within a frame, which
contains the device address. This is used when the
asynchronous interface is configured to use the async
generic protocol handler. Because no knowledge of the
protocol is built-in to the IOS, it must be told where
the address field lives within the frame. That way IOS
can correctly route the frames for this protocol."
REFERENCE
"CISCO-BSTUN-MIB"
::= { asppPortEntry 4 }
asppPortEOFCharacter OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the protocol character to use to delimit
the end of a frame. The valid character is 0-255 and
256 indicates the object is not configured."
::= { asppPortEntry 5 }
asppPortSOFCharacter OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the protocol character to use to delimit
the beginning of a frame. The valid character is 0-255
and 256 indicates the object is not configured."
::= { asppPortEntry 6 }
asppPortIgnoreSequenceNumber OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether the asp sequence numbers used to
synchronize aspp traffic between head-end and tail-end
routers should be ignored. This is enabled if there
isn't a one to one correlation between commands and
responses between the two routers."
DEFVAL { false }
::= { asppPortEntry 7 }
asppPortRspTimer OBJECT-TYPE
SYNTAX Integer32 (1..30)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the amount of time the router will wait for a
response to a packet before retransmission."
::= { asppPortEntry 8 }
asppPortRxTimer OBJECT-TYPE
SYNTAX Integer32 (10..60)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the maximum amount of time the router will
wait for a complete packet to be received. It starts
when an STX character is received."
::= { asppPortEntry 9 }
asppPortHostTimer OBJECT-TYPE
SYNTAX Integer32 (10..120)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the maximum amount of time the router will
wait for a response to a terminal request from the
host. It starts when a terminal request is forwarded
to the host."
::= { asppPortEntry 10 }
asppPortConnectTimer OBJECT-TYPE
SYNTAX Integer32 (1..30)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the maximum amount of time the router will
wait for the activation of the tunnel connection to the
host to complete. It starts when a terminal requests a
session with host."
::= { asppPortEntry 11 }
asppPortRetryCount OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the maximum number of timers a packet will be
retransmitted before the connection with the terminal
will be disconnected."
::= { asppPortEntry 12 }
asppPortDelayEnq OBJECT-TYPE
SYNTAX Integer32 (1..1000)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the amount of time to wait after sending a
connect packet to the the terminal before sending the
ENQ to initiate a session"
::= { asppPortEntry 13 }
asppPortDisableEnq OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether sending of ENQ to initiate a session
with the terminal is disabled."
DEFVAL { false }
::= { asppPortEntry 14 }
asppPortSendAck OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether the router will send an ACK to
acknowledge packets."
DEFVAL { false }
::= { asppPortEntry 15 }
asppPortDirect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether the line mode is direct or dialed.
If in direct the router will immediately send ENQ
without waiting for AT commands"
DEFVAL { false }
::= { asppPortEntry 16 }
asppPortDCDAlways OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether DCD should always be asserted or
asserted only when the connection is active."
DEFVAL { false }
::= { asppPortEntry 17 }
-- *************************************************************************
-- * Conformance Information
-- *************************************************************************
asppMibConformance OBJECT IDENTIFIER ::= { ciscoAsppMIB 3 }
asppMibCompliances OBJECT IDENTIFIER ::= { asppMibConformance 1 }
asppMibGroups OBJECT IDENTIFIER ::= { asppMibConformance 2 }
--
-- *************************************************************************
-- * Compliance Statements
-- *************************************************************************
asppMibCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for ASP."
MODULE -- this module
MANDATORY-GROUPS {
asppPortsGroup
}
::= { asppMibCompliances 1 }
asppMibComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for ASP."
MODULE -- this module
MANDATORY-GROUPS {
asppPortsGroup
}
GROUP asppPortsGenericGroup
DESCRIPTION
"This group is mandatory when implementing
asyncGeneric protocol."
GROUP asppPortsAposGroup
DESCRIPTION
"This group is mandatory when implementing
the apos protocol."
::= { asppMibCompliances 2 }
asppPortsGroup OBJECT-GROUP
OBJECTS {
asppPortProtocol,
asppPortRole,
asppPortReceiveInterFrameTimeout,
asppPortDeviceAddressOffset
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
interfaces that run asynchronous security protocols."
::= { asppMibGroups 1}
asppPortsGenericGroup OBJECT-GROUP
OBJECTS {
asppPortEOFCharacter,
asppPortSOFCharacter,
asppPortIgnoreSequenceNumber
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
interfaces that run asynchronous generic protocols."
::= { asppMibGroups 2}
asppPortsAposGroup OBJECT-GROUP
OBJECTS {
asppPortRspTimer,
asppPortRxTimer,
asppPortHostTimer,
asppPortConnectTimer,
asppPortRetryCount,
asppPortDelayEnq,
asppPortDisableEnq,
asppPortSendAck,
asppPortDirect,
asppPortDCDAlways
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
interfaces that run asynchronous protocol to communicate
to Point of Sale protocols."
::= { asppMibGroups 3}
END

709
snmp_mib_archive/CISCO-ATM-ACCESS-LIST-MIB.my 2
View File

@ -1,709 +0,0 @@
-- *****************************************************************
-- ATM Access MIB file.
--
-- January 1997, Chandrasekaran, Ravikumar
--
-- Copyright (c) 1997 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
CISCO-ATM-ACCESS-LIST-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString, RowStatus FROM SNMPv2-TC
ifIndex FROM IF-MIB
ciscoMgmt FROM CISCO-SMI
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF;
ciscoAtmAccessListMIB MODULE-IDENTITY
LAST-UPDATED "9611100000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-atm@cisco.com"
DESCRIPTION
"A cisco ATM access list mib module."
REVISION "9611180000Z"
DESCRIPTION
"Initial Version of this MIB module."
::= { ciscoMgmt 67 }
ciscoAtmAccessListMIBObjects OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIB 1 }
ciscoAtmAddressTemplate OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIBObjects 1 }
ciscoAtmAddressFilter OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIBObjects 2 }
ciscoAtmAccessGroup OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIBObjects 3 }
-- Textual Conventions:
CiscoAtmAddressTemplate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A NSAP address or address template string. If it only contains
hexadecimal digits, 20-octet long, it represents a single
NSAP address.
For example,
47.0091.8100.0000.0060.3e5b.7201.4000.0c is an NSAP address
with no wild cards.
If it contains one or more wild-card characters, it then
represents multiple NSAP addresses as follows. An
ellipsis ... matches any number of leading or trailing
hexadecimal digits.
For example,
12.8344... will match any address that starts with 12.8344 and
...0201.01 will match any address that ends with 0201.01.
An asterisk * can be used to match any single 4-bit nibble
in an address string.
For example, in
47.8*9*1200000000603E5B7201.00603E5B7201.00 the 2nd nibble of
the 2nd most significant byte and 2nd nibble of 3rd most
significant byte will match any 4bit nibble value.
An asterisk (*) enclosed by a pair of parentheses, can also
be used to match any binary bit (0 or 1) in a 4-bit nibble.
For example, in
...92(1*0*)8.01 the asterisk within parentheses will match
either binary values 0 and 1."
SYNTAX DisplayString (SIZE(1..70))
-- This MIB defines the following four tables :
--
-- ciscoAtmAddressTemplateTable
--
--
-- This table is used to alias the address-templates. The aliases created
-- in this table may be refered to from ciscoAtmAddressFilterSetTable.
--
-- ciscoAtmAddressFilterSetTable
--
--
-- Each row in this table is either an addressFilter or a timeOfDayFilter.
-- An addressFilter specifies an address-template which can be an actual
-- address-template or an aliasname defined in the ciscoAtmAddressTemplateTable.
-- For example,
-- Consider the following row as existing already in the
-- ciscoAtmAddressTemplateTable.
-- atmAddressAliasName = "aaa" ,
-- atmAddressTemplate."aaa" = "47.8191..." and
-- atmAddressTemplateRowStatus."aaa" = active
--
-- For example, when an object atmAddressFilterSetTemplate."abc" in the
-- ciscoAtmAddressFilterSetTable is set to a value of "aaa", the value that
-- gets stored into the object is "47.8191..." which is obtained from the
-- alias mapping defined by the ciscoAtmAddressTemplateTable.
--
-- If no such alias exists in the ciscoAtmAddressTemplateTable whose row is
-- active, an attempt shall be made to interpret the value as an
-- address-template itself. In the above example, if the object
-- atmAddressTemplateRowStatus."aaa" is not 'active' then this set operation
-- will fail because 'aaa' is not a valid atm address-template.
--
-- After the creation of the above filter row, any change to the value of
-- atmAddressTemplate."aaa" will not affect the value of the object
-- atmAddressFilterSetTemplate."abc".
-- For example, if the value of atmAddressTemplate."aaa" is changed to
-- "...9002.01", the value of atmAddressFilterSetTemplate."abc" in the above
-- example will still remain "47.8191..."
--
-- Those rows(filters) which have the same atmAddressFilterSetName form a
-- FilterSet. These FilterSets can be combined to Form a Filter Expression.
-- These FilterSets can also be associated with an interface as an incoming
-- or an outgoing access-group.
--
-- During call filtering, those filters in the filter-set that specify a
-- complete 20-byte address with no wild cards are first considered for
-- matching against the address to be filtered.
-- Only if none of the filters with in a filter-set that specify complete
-- 20-byte address without wild cards match, other filters are matched
-- against the address to be filtered in the increasing order of their
-- atmAddressFilterSetIndex values.
--
-- For example, consider the following filter-set "abc"
--
-- atmAddressFilterSetType."abc".1 = addressFilter
-- atmAddressFilterSetTemplate."abc".1 = "47.8191..."
-- atmAddressFilterSetPermission."abc".1 = deny
--
-- the second filter is a complete 20-byte address with no wild cards :
--
-- atmAddressFilterSetType."abc".2 = addressFilter
-- atmAddressFilterSetTemplate."abc".2 =
-- "47.00918100000000603E5B7201.00603E5B7201.01"
-- atmAddressFilterSetPermission."abc".2 = deny
--
-- the third filter is
--
-- atmAddressFilterSetType."abc".5 = addressFilter
-- atmAddressFilterSetTemplate."abc".5 = "...9876.01"
-- atmAddressFilterSetPermission."abc".5 = deny
--
-- In the above example, the filter with index 2 will be matched first with the
-- address to be filtered. Only if this filter fails to match, the filters
-- with atmAddressFilterSetIndex values 1 and 5 will be considered in that
-- order respectively. If none of the filters match in a filter-set then
-- the default action would be to deny the call. If this is not desired for a
-- filter-set then a filter with a permission of "permit" and an
-- address-template value of "..." has to be added to that filter-set as the
-- last filter i.e., with the highest atmAddressFilterSetIndex value. So those
-- addresses that dont match any other filter will certainly match the last
-- default filter and will be permitted to go through.
--
-- In the case of the time-of-day filters, if the start-time and the end-time
-- are the same, it represents a 24-hour interval.
--
-- ciscoAtmAddressFilterExpressionTable
--
--
-- This Table is used to define filter expressions out of Filter Sets defined
-- in the ciscoAtmAddressFilterSetTable and already existing Filter expressions
-- defined in this table itself.
--
-- atmAddressFilterExpressionOperator object in this table supports AND, OR,
-- XOR, NOT operators. The objects atmAddressFilterExpressionTerm1 and
-- atmAddressFilterExpressionTerm2 represent the operands. The object
-- atmAddressFilterExpressionTerm2 should not be used for expressions with
-- unary operator or no operator(none(5) operator).
--
-- atmAddressFilterExpressionTerm1 and atmAddressFilterExpressionTerm2 can
-- only point to already active Filter Sets/Filter Expressions. Because of
-- this, atmAddressFilterSetName and atmAddressFilterExpressionName objects
-- shall have values that are unique across both ciscoAtmAddressFilterSetTable
-- and ciscoAtmAddressFilterExpressionTable.
--
-- Consider a FilterExpressionEntry for example,
--
-- atmAddressFilterExpressionOperator."xyz" = NOT
-- atmAddressFilterExpressionTerm1."xyz" = "abc"
--
-- and the filter-set "abc" has three filters defined in it as follows :
--
-- atmAddressFilterSetType."abc".1 = addressFilter
-- atmAddressFilterSetTemplate."abc".1 = "47.8191..."
-- atmAddressFilterSetPermission."abc".1 = deny
--
-- the second filter is a complete 20-byte address with no wild cards :
--
-- atmAddressFilterSetType."abc".2 = addressFilter
-- atmAddressFilterSetTemplate."abc".2 =
-- "47.00918100000000603E5B7201.00603E5B7201.01"
-- atmAddressFilterSetPermission."abc".2 = deny
--
-- the third filter is
--
-- atmAddressFilterSetType."abc".5 = addressFilter
-- atmAddressFilterSetTemplate."abc".5 = "...9876.01"
-- atmAddressFilterSetPermission."abc".5 = deny
--
-- If the value of atmAddressFilterSetTemplate."abc".5 is changed to "..."
-- after the filter-expression "xyz" was created, the change will affect
-- the filter-expression "xyz" too. The same would be true if the objects
-- atmAddressFilterExpressionTerm1 and atmAddressFilterExpressionTerm2 refer
-- to already active filter-expressions.
--
--
-- ciscoAtmAccessGroupTable
--
--
-- This table defines the out-going accessGroup and the incoming accessGroup
-- for an interface. An AccessGroup can be a Filter Set or a Filter Expression.
--
-- ciscoAtmAddressTemplateTable
--
-- This is the ATM address template alias table
ciscoAtmAddressTemplateTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscoAtmAddressTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM address template alias Table. Entries in this table can be
created and deleted by setting the atmAddressTemplateRowStatus object
to appropriate values. Existing rows can be modified when the row is
active. Entries in this table can be created/modified/ deleted through
the commands provided by CLI also."
::= { ciscoAtmAddressTemplate 1 }
ciscoAtmAddressTemplateEntry OBJECT-TYPE
SYNTAX CiscoAtmAddressTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry in the address template table."
INDEX { atmAddressAliasName }
::= { ciscoAtmAddressTemplateTable 1 }
CiscoAtmAddressTemplateEntry ::=
SEQUENCE {
atmAddressAliasName DisplayString,
atmAddressTemplate CiscoAtmAddressTemplate,
atmAddressTemplateRowStatus RowStatus
}
atmAddressAliasName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..30))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The alias name for an ATM address template."
::= { ciscoAtmAddressTemplateEntry 1}
atmAddressTemplate OBJECT-TYPE
SYNTAX CiscoAtmAddressTemplate
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Address Template to be aliased."
::= { ciscoAtmAddressTemplateEntry 2}
atmAddressTemplateRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To create, delete, read and write a row. Entries in this table can be
modified on the fly. For example, value of atmAddressTemplateObject
can be changed even when the corresponding atmAddressTemplateRowStatus
object indicates that the row is active."
::= { ciscoAtmAddressTemplateEntry 3}
-- This group is the ATM address filter set table
ciscoAtmAddressFilterSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscoAtmAddressFilterSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM address filter set Table. Entries in this table can be
created/deleted by setting the atmAddressFilterSetRowStatus object
to appropriate values. Existing entries in this table can be modified
on the fly. Entries in this table can be created/modified/deleted
through the commands provided by the CLI also."
::= { ciscoAtmAddressFilter 1 }
ciscoAtmAddressFilterSetEntry OBJECT-TYPE
SYNTAX CiscoAtmAddressFilterSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry in the address filter set table."
INDEX { atmAddressFilterSetName,
atmAddressFilterSetIndex }
::= { ciscoAtmAddressFilterSetTable 1 }
CiscoAtmAddressFilterSetEntry ::=
SEQUENCE {
atmAddressFilterSetName DisplayString,
atmAddressFilterSetIndex INTEGER,
atmAddressFilterSetType INTEGER,
atmAddressFilterSetTemplate DisplayString,
atmAddressFilterSetStartHour INTEGER,
atmAddressFilterSetStartMinute INTEGER,
atmAddressFilterSetEndHour INTEGER,
atmAddressFilterSetEndMinute INTEGER,
atmAddressFilterSetPermission INTEGER,
atmAddressFilterSetRowStatus RowStatus
}
atmAddressFilterSetName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..30))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name for an ATM address filter set."
::= { ciscoAtmAddressFilterSetEntry 1}
atmAddressFilterSetIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Index for a Filter in an ATM address filter set. The filters are
matched in the ascending order of atmAddressFilterSetIndex. A filter
with a lower atmAddressFilterSetIndex value is matched prior to a
filter with a higher atmAddressFilterSetIndex value. The only
exception to this rule are those address filters that specify all
20-bytes without using wildcards. These filters are matched before
any other wildcard filter in a filter-set irrespective of the
atmAddressFilterSetIndex value."
::= { ciscoAtmAddressFilterSetEntry 2}
atmAddressFilterSetType OBJECT-TYPE
SYNTAX INTEGER {
addressFilter(1),
timeOfDayFilter(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the type of a filter whether atm Address filter or a
Time-of-day filter. If the value of this object is addressFilter(1)
then the objects atmAddressFilterSetStartHour,
atmAddressFilterSetStartMinute, atmAddressFilterSetEndHour and
atmAddressFilterSetEndMinute shall contain only the default values and
cannot be set to any other value. If the value of this object is
timeOfDayFilter(2) then the object atmAddressFilterSetTemplate shall
contain only the default value and cannot be set to any other value.
If the value of this object is modified to timeOfDayFilter(2),
for an existing addressFilter row, the corresponding
atmAddressFilterSetTemplate object will be set to its default value
automatically. If the value of this object is modified to
addressFilter(1) for an existing timeOfDayFilter row, the corresponding
objects atmAddressFilterSetStartHour, atmAddressFilterSetStartMinute,
atmAddressFilterSetEndHour and atmAddressFilterSetEndMinute
will be set to their default values automatically."
DEFVAL { addressFilter }
::= { ciscoAtmAddressFilterSetEntry 3}
atmAddressFilterSetTemplate OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..70))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is either an existing atmAddressAliasName, or an ATM address
template, as described in the CiscoAtmAddressTemplate. If the value
of this object matches an atmAddressAliasName in the
ciscoAtmAddressTemplateTable, then the value of the corresponding
atmAddressTemplate object will be used. And subsequent attempts to
read this object will return the address-template instead of the alias
name. Only if a such a match is not found in ciscoAtmAddressTemplateTable,
an attempt can be made to interpret this object as a
CiscoAtmAddressTemplate. The value of this object shall be '...' and
cannot be set to any other value if a filter is of the type
timeOfDayFilter"
DEFVAL { "..." }
::= { ciscoAtmAddressFilterSetEntry 4}
atmAddressFilterSetStartHour OBJECT-TYPE
SYNTAX INTEGER (0..23)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the Hours portion of the Start time of a Time-of-day
filter. If the value of atmAddressFilterSetType object is
addressFilter, then this object cannot be set and shall only
contain the default value"
DEFVAL { 0 }
::= { ciscoAtmAddressFilterSetEntry 5}
atmAddressFilterSetStartMinute OBJECT-TYPE
SYNTAX INTEGER (0..59)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the Minutes portion of the Start time of a Time-of-day
filter. If the value of atmAddressFilterSetType object is
addressFilter, then this object cannot be set and shall only
contain the default value"
DEFVAL { 0 }
::= { ciscoAtmAddressFilterSetEntry 6}
atmAddressFilterSetEndHour OBJECT-TYPE
SYNTAX INTEGER (0..23)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the Hours portion of the End time of a Time-of-day
filter. If the value of atmAddressFilterSetType object is
addressFilter, then this object cannot be set and shall only
contain the default value"
DEFVAL { 0 }
::= { ciscoAtmAddressFilterSetEntry 7}
atmAddressFilterSetEndMinute OBJECT-TYPE
SYNTAX INTEGER (0..59)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the Minutes portion of the End time of a Time-of-day
filter. If the value of atmAddressFilterSetType object is
addressFilter, then this object cannot be set and shall only
contain the default value"
DEFVAL { 0 }
::= { ciscoAtmAddressFilterSetEntry 8}
atmAddressFilterSetPermission OBJECT-TYPE
SYNTAX INTEGER { permit(1), deny(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the action of a filter set (either permit or deny), when
a specific ATM address matches with the atmAddressFilterSetTemplate
defined in this address filter set in case of an addressFilter or
when the current time falls in the interval specified by the
atmAddressFilterSetStartHour, atmAddressFiltersetStartMinute,
atmAddressFilterSetEndHour and atmAddressFiltersetEndMinute objects
in case of a timeOfDayFilter."
DEFVAL { permit }
::= { ciscoAtmAddressFilterSetEntry 9}
atmAddressFilterSetRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To create, delete, read and write a row. Entries in this table can be
modified on the fly. For exmaple, atmAddressFilterSetTemplate object
of an existing addressFilter can be modified even if the value of the
corresponding atmAddressFilterSetRowStatus object indicates that the
row is active."
::= { ciscoAtmAddressFilterSetEntry 10}
-- This group is the ATM address filter expression table
ciscoAtmAddressFilterExpressionTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscoAtmAddressFilterExpressionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM address filter expression table. Entries in this table can be
created/deleted by setting the atmAddressFilterExpressionRowStatus
object to appropriate values. Existing entries in this table cannot be
modified on the fly. Before an existing active entry can be modified,
it has to be brought to notInService by setting the corresponding
atmAddressFilterExpressionRowStatus object to notInService. Entries
in this table can also be created/modified/deleted through the commands
provided by the CLI."
::= { ciscoAtmAddressFilter 2 }
ciscoAtmAddressFilterExpressionEntry OBJECT-TYPE
SYNTAX CiscoAtmAddressFilterExpressionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry in the address filter expression table."
INDEX { atmAddressFilterExpressionName }
::= { ciscoAtmAddressFilterExpressionTable 1 }
CiscoAtmAddressFilterExpressionEntry ::=
SEQUENCE {
atmAddressFilterExpressionName DisplayString,
atmAddressFilterExpressionQualifier1 INTEGER,
atmAddressFilterExpressionTerm1 DisplayString,
atmAddressFilterExpressionQualifier2 INTEGER,
atmAddressFilterExpressionTerm2 DisplayString,
atmAddressFilterExpressionOperator INTEGER,
atmAddressFilterExpressionRowStatus RowStatus
}
atmAddressFilterExpressionName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..30))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name for an ATM address filter expression."
::= { ciscoAtmAddressFilterExpressionEntry 1}
atmAddressFilterExpressionQualifier1 OBJECT-TYPE
SYNTAX INTEGER { source(1), destination(2), none(3) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the ATM filter set specified by the
atmAddressFilterExpressionTerm1 should be applied to either the
source (calling party) or destination (called party) ATM address.
atmAddressFilterExpressionQualifier1 shall be none(3) if
atmAddressFilterExpressionTerm1 is a Filter Expression or a
timeOfDayFilter. The value of this object can be modified for
an existing row only after placing that row notInService by setting
the corresponding atmAddressFilterExpressionRowStatus object to
notInService(2)."
DEFVAL { destination }
::= { ciscoAtmAddressFilterExpressionEntry 2}
atmAddressFilterExpressionTerm1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..30))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is the name of the first ATM address filter set or ATM
address filter expression used in the logical expression. The
value of this object can only be either an already existing
atmAddressFilterSetName whose row is already active in the
ciscoAtmAddressFilterSetTable or an atmAddressFilterExpressionName
whose row is already active in the ciscoAtmAddressFilterExpressionTable.
When the reference that this object is pointing to gets deleted out from
under it, this object may have a value that does not exist in both
ciscoAtmAddressFilterSetTable and ciscoAtmAddressFilterExpressionTable
and the expression will be evaluated as if the deleted filter resulted
in a match with a permission of 'permit'. The value of this object can
be modified for an existing row only after placing that row notInService
by setting the corresponding atmAddressFilterExpressionRowStatus object
to notInService."
::= { ciscoAtmAddressFilterExpressionEntry 3}
atmAddressFilterExpressionQualifier2 OBJECT-TYPE
SYNTAX INTEGER { source(1), destination(2), none(3) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the ATM filter set or filter expression specified by the
atmAddressFilterExpressionTerm2 should be applied to either the
source (calling party) or destination (called party) ATM address.
It is not used if the logical operator is NOT.
atmAddressFilterExpressionQualifier2 shall be none(3) if
atmAddressFilterExpressionTerm2 is a Filter Expression or
timeOfDayFilter. The value of this object can be modified for an
existing row only after placing the row notInService by setting
the corresponding atmAddressFilterExpressionRowStatus object to
notInService(2)."
DEFVAL { destination }
::= { ciscoAtmAddressFilterExpressionEntry 4}
atmAddressFilterExpressionTerm2 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..30))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of the second ATM address filter set or ATM address filter
expression used in the logical expression. The value of this object
can only be either an existing atmAddressFilterSetName whose row is
already active in the ciscoAtmAddressFilterSetTable or an existing
atmAddressFilterExpressionName whose row is already active in the
ciscoAtmAddressFilterExpressionTable. The value of this object shall
be null if the value of corresponding atmAddressFilterExpressionOperator
object is not(4) or none(5). When the reference that this object is
pointing to gets deleted out from under it, this object may have a value
that does not exist in both ciscoAtmAddressFilterExpressionTable and
ciscoAtmAddressFilterSetTable and the expression will be evaluated
as if the deleted filter resulted in a match with a permission of
'permit'. The value of this object can be modified for an existing
row only after placing that row notInService by setting the respective
atmAddressFilterExpressionRowStatus object to the value notInService."
::= { ciscoAtmAddressFilterExpressionEntry 5}
atmAddressFilterExpressionOperator OBJECT-TYPE
SYNTAX INTEGER { and(1), or(2), xor(3), not(4), none(5) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The logical operator to be applied to the associated ATM address
filter logical expression. The value of this object can be modified
for an existing row only after placing that row notInService by setting
the corresponding atmAddressFilterExpressionRowStatus object to the
value notInService."
::= { ciscoAtmAddressFilterExpressionEntry 6}
atmAddressFilterExpressionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To create, delete, read and write a row. Existing entries in this table
that are active cannot be modified on the fly. Before an existing entry
in this table that is active can be modified, the corresponding
atmAddressFilterExpressionRowStatus object has to be set to notInService."
::= { ciscoAtmAddressFilterExpressionEntry 7}
-- This group is the ATM access group table
ciscoAtmAccessGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscoAtmAccessGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM access group Table. This table shall only include interfaces
whose ifType is atm(37) or logicalAtm(80). Entries in this table can
be modified through the commands provided by the CLI also."
::= { ciscoAtmAccessGroup 1 }
ciscoAtmAccessGroupEntry OBJECT-TYPE
SYNTAX CiscoAtmAccessGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ATM access group table. This table shall only
include interfaces whose ifType is atm(37) or logicalAtm(80)"
INDEX { ifIndex }
::= { ciscoAtmAccessGroupTable 1 }
CiscoAtmAccessGroupEntry ::=
SEQUENCE {
atmInboundAccessGroupName DisplayString,
atmOutboundAccessGroupName DisplayString
}
atmInboundAccessGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of an ATM address filter set or expression used for access
control for inbound call on the associated interface."
::= { ciscoAtmAccessGroupEntry 1}
atmOutboundAccessGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of an ATM address filter set or expression used for access
control for outbound call on the associated interface."
::= { ciscoAtmAccessGroupEntry 2}
-- conformance information
ciscoAtmAccessListMIBConformance
OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIB 3 }
ciscoAtmAccessListMIBCompliances
OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIBConformance 1 }
ciscoAtmAccessListMIBGroups
OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIBConformance 2 }
-- compliance statements
ciscoAtmAccessListMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the Cisco ATM access list group."
MODULE -- this module
MANDATORY-GROUPS { ciscoAtmAccessListMIBGroup }
::= { ciscoAtmAccessListMIBCompliances 1 }
-- units of conformance
ciscoAtmAccessListMIBGroup OBJECT-GROUP
OBJECTS {
atmAddressTemplate,
atmAddressTemplateRowStatus,
atmAddressFilterSetType,
atmAddressFilterSetTemplate,
atmAddressFilterSetStartHour,
atmAddressFilterSetStartMinute,
atmAddressFilterSetEndHour,
atmAddressFilterSetEndMinute,
atmAddressFilterSetPermission,
atmAddressFilterSetRowStatus,
atmAddressFilterExpressionQualifier1,
atmAddressFilterExpressionTerm1,
atmAddressFilterExpressionQualifier2,
atmAddressFilterExpressionTerm2,
atmAddressFilterExpressionOperator,
atmAddressFilterExpressionRowStatus,
atmInboundAccessGroupName,
atmOutboundAccessGroupName
}
STATUS current
DESCRIPTION
""
::= { ciscoAtmAccessListMIBGroups 1 }
END

157
snmp_mib_archive/CISCO-ATM-ADDR-MIB.my 2
View File

@ -1,157 +0,0 @@
--------------------------------------------------------------------
-- Cisco version of the supplemental AtoM MIB for switch reg. Addresses
--
-- January 1996, Kartik Chandrasekhar
--
-- Copyright (c) 1996 by cisco Systems, Inc.
-- All rights reserved.
--------------------------------------------------------------------
--
CISCO-ATM-ADDR-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
RowStatus FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
ifIndex FROM IF-MIB
ciscoExperiment FROM CISCO-SMI;
ciscoAtmAddrMIB MODULE-IDENTITY
LAST-UPDATED "9605060000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-atm@cisco.com"
DESCRIPTION
"ATM address MIB"
REVISION "9605060000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoExperiment 12 } -- assigned by cana@cisco.com
-- AtmAddr defined here for completeness. Over time it should be
-- imported from the ATMTC-MIB under development by the IETF
AtmAddr ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The ATM address used by the network entity. The
address types are: no address (0 octets), E.164 (8
octets), network prefix (13 octets), and NSAP (20
octets). Note: The E.164 address is encoded in
BCD format."
SYNTAX OCTET STRING (SIZE(0|8|13|20))
ciscoAtmAddrMIBObjects OBJECT IDENTIFIER ::= { ciscoAtmAddrMIB 1 }
-- ATM Interface Administrative Address Table
-- This table contains a list of the valid calling party
-- addresses for a UNI in the case of both PVCs and SVCs.
-- For PVCs, if addresses are not used then an entry in
-- this table is not necessary.
ciscoAtmIfAdminAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscoAtmIfAdminAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains an address list on a per interface
basis. This table only applies to switches or networks
and only for interfaces that have more than one address
assigned."
::= { ciscoAtmAddrMIBObjects 1 }
ciscoAtmIfAdminAddrEntry OBJECT-TYPE
SYNTAX CiscoAtmIfAdminAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the CiscoAtmIfAdminAddrTable."
INDEX { ifIndex, ciscoAtmIfAdminAddrAddress }
::= { ciscoAtmIfAdminAddrTable 1 }
CiscoAtmIfAdminAddrEntry ::=
SEQUENCE {
ciscoAtmIfAdminAddrAddress AtmAddr,
ciscoAtmIfAdminAddrRowStatus RowStatus
}
ciscoAtmIfAdminAddrAddress OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A valid address for a given switch or network
interface."
::= { ciscoAtmIfAdminAddrEntry 1}
ciscoAtmIfAdminAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to create and delete rows in the
atmIfAdminAddrTable."
::= { ciscoAtmIfAdminAddrEntry 2}
-- Conformance Information
ciscoAtmIfAdminAddrMIBConformance
OBJECT IDENTIFIER ::= { ciscoAtmAddrMIB 3 }
ciscoAtmIfAdminAddrMIBCompliances
OBJECT IDENTIFIER ::= { ciscoAtmIfAdminAddrMIBConformance 1 }
ciscoAtmIfAdminAddrMIBGroups
OBJECT IDENTIFIER ::= { ciscoAtmIfAdminAddrMIBConformance 2 }
-- Compliance Statements
ciscoAtmIfAdminAddrMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the Cisco ATM address
group."
MODULE -- this module
MANDATORY-GROUPS { ciscoAtmIfAdminAddrMIBGroup }
::= { ciscoAtmIfAdminAddrMIBCompliances 1 }
-- Units of Conformance
ciscoAtmIfAdminAddrMIBGroup OBJECT-GROUP
OBJECTS {
ciscoAtmIfAdminAddrRowStatus
}
STATUS current
DESCRIPTION
"This object is used to create and delete rows in the
atmIfAdminAddrTable."
::= { ciscoAtmIfAdminAddrMIBGroups 1 }
END

108
snmp_mib_archive/CISCO-ATM-CAPABILITY.my 2
View File

@ -1,108 +0,0 @@
-- *****************************************************************
-- ciscoAtmCapabilities MIB
--
-- AGENT-CAPABILITIES mib for ATM-MIB
--
-- June 2002, Subra Hegde
--
-- Copyright(c) 2002 by Cisco Systems, Inc.
--
-- *****************************************************************
CISCO-ATM-CAPABILITY DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY
FROM SNMPv2-SMI
AGENT-CAPABILITIES
FROM SNMPv2-CONF
ciscoAgentCapability
FROM CISCO-SMI;
ciscoAtmCapability MODULE-IDENTITY
LAST-UPDATED "200206120000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"The Agent Capabilities for ATM-MIB."
REVISION "200206120000Z"
DESCRIPTION
"Initial Version of the MIB module."
::= { ciscoAgentCapability 9999 }
ciscoAtmCapabilityV2R00 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8850 Release 2.00,
BPX SES Release 1.00."
STATUS current
DESCRIPTION "ATM MIB Capabilities"
SUPPORTS ATM-MIB
INCLUDES { atmInterfaceConfGroup2 }
VARIATION atmInterfaceMaxVpcs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION atmInterfaceMaxVccs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION atmInterfaceConfVpcs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION atmInterfaceConfVccs
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION atmInterfaceMaxActiveVpiBits
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION atmInterfaceMaxActiveVciBits
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION atmInterfaceIlmiVpi
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION atmInterfaceIlmiVci
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION atmInterfaceMyNeighborIpAddress
ACCESS read-only
DESCRIPTION "Write access is not supported."
VARIATION atmInterfaceMyNeighborIfName
ACCESS read-only
DESCRIPTION "Write access is not supported."
VARIATION atmInterfaceCurrentMaxVpiBits
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION atmInterfaceCurrentMaxVciBits
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION atmInterfaceSubscrAddress
ACCESS not-implemented
DESCRIPTION "Not supported."
::= { ciscoAtmCapability 1 }
END

862
snmp_mib_archive/CISCO-ATM-CELL-LAYER-CAPABILITY.my 2
View File

@ -1,862 +0,0 @@
-- *****************************************************************
-- ciscoAtmCellLayerCapabilities MIB
--
-- AGENT-CAPABILITIES for CISCO-ATM-CELL-LAYER-MIB
--
-- Jan 2003, Prasanna Mucharikar
--
-- Copyright(c) 2003 by Cisco Systems,Inc.
--
-- *****************************************************************
CISCO-ATM-CELL-LAYER-CAPABILITY DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY
FROM SNMPv2-SMI
AGENT-CAPABILITIES
FROM SNMPv2-CONF
ciscoAgentCapability
FROM CISCO-SMI;
ciscoAtmCellLayerCapability MODULE-IDENTITY
LAST-UPDATED "200301300000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"The Agent Capabilities for
CISCO-ATM-CELL-LAYER-MIB.
- cacLayerCapabilityAxsmV2R00 is for
ATM Switch Service Module(AXSM).
- cacLayerCapabilityAxsmeV2R0160 is for
Enhanced AXSM(AXSM-E).
- cacLayerCapabilityAxsmxgV4R00 is for
10 Gig. AXSM(AXSM-XG)."
REVISION "200301300000Z"
DESCRIPTION
"Added cacLayerCapabilityAxsmxgV4R00."
REVISION "200205140000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoAgentCapability 275 }
cacLayerCapabilityAxsmV2R00 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8850 Release 2.0.00"
STATUS current
DESCRIPTION "CISCO-ATM-CELL-LAYER-MIB Capabilities for
AXSM Service Module."
SUPPORTS CISCO-ATM-CELL-LAYER-MIB
INCLUDES { caclMIBGroup,
caclATMSwitchStatsMIBGroup,
caclATMEndSyatemStatsMIBGroup
}
::= { ciscoAtmCellLayerCapability 1 }
cacLayerCapabilityAxsmeV2R0160 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8850 Release 2.1.60"
STATUS current
DESCRIPTION "CISCO-ATM-CELL-LAYER-MIB Capabilities for
Enhanced AXSM(AXSM-E) Service Module."
SUPPORTS CISCO-ATM-CELL-LAYER-MIB
INCLUDES { caclMIBGroup,
caclATMSwitchStatsMIBGroup,
caclATMEndSyatemStatsMIBGroup,
caclIntervalStatsMIBGroup
}
VARIATION caclInXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInUpcCLP0DiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInUpcTotalDiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInUpcTotalNonCompCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutRcvIdleCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutVpiVciErrCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInUpcCLP0DiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInUpcTotalDiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInUpcTotNonCmpCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutRcvIdleCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutVpiVciErrCells
ACCESS not-implemented
DESCRIPTION "Not supported."
::= { ciscoAtmCellLayerCapability 2 }
cacLayerCapabilityAxsmxgV4R00 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8950 Release 4.0.00"
STATUS current
DESCRIPTION "CISCO-ATM-CELL-LAYER-MIB Capabilities for
10 Gig. AXSM Service Module (AXSM-XG)."
SUPPORTS CISCO-ATM-CELL-LAYER-MIB
INCLUDES { caclMIBGroup,
caclATMStatsMIBGroup,
caclATMSwitchStatsMIBGroup1,
caclIntervalStatsMIBGroup1
}
VARIATION caclInXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInUpcCLP0DiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInUpcTotalDiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInUpcTotalNonCompCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutRcvIdleCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutVpiVciErrCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighInXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighInXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighOutXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighOutXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighOutValidOAMCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInUpcCLP0DiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInUpcTotalDiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInUpcTotNonCmpCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutRcvIdleCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutVpiVciErrCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighIntervalInXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighIntervalInXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighIntervalOutXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighIntervalOutXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighIntervalOutVpiVciErrCells
ACCESS not-implemented
DESCRIPTION "Not supported."
::= { ciscoAtmCellLayerCapability 3 }
END
-- *****************************************************************
-- ciscoAtmCellLayerCapabilities MIB
--
-- AGENT-CAPABILITIES for CISCO-ATM-CELL-LAYER-MIB
--
-- Jan 2003, Prasanna Mucharikar
--
-- Copyright(c) 2003 by Cisco Systems,Inc.
--
-- *****************************************************************
CISCO-ATM-CELL-LAYER-CAPABILITY DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY
FROM SNMPv2-SMI
AGENT-CAPABILITIES
FROM SNMPv2-CONF
ciscoAgentCapability
FROM CISCO-SMI;
ciscoAtmCellLayerCapability MODULE-IDENTITY
LAST-UPDATED "200301300000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"The Agent Capabilities for
CISCO-ATM-CELL-LAYER-MIB.
- cacLayerCapabilityAxsmV2R00 is for
ATM Switch Service Module(AXSM).
- cacLayerCapabilityAxsmeV2R0160 is for
Enhanced AXSM(AXSM-E).
- cacLayerCapabilityAxsmxgV4R00 is for
10 Gig. AXSM(AXSM-XG)."
REVISION "200301300000Z"
DESCRIPTION
"Added cacLayerCapabilityAxsmxgV4R00."
REVISION "200205140000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoAgentCapability 275 }
cacLayerCapabilityAxsmV2R00 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8850 Release 2.0.00"
STATUS current
DESCRIPTION "CISCO-ATM-CELL-LAYER-MIB Capabilities for
AXSM Service Module."
SUPPORTS CISCO-ATM-CELL-LAYER-MIB
INCLUDES { caclMIBGroup,
caclATMSwitchStatsMIBGroup,
caclATMEndSyatemStatsMIBGroup
}
::= { ciscoAtmCellLayerCapability 1 }
cacLayerCapabilityAxsmeV2R0160 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8850 Release 2.1.60"
STATUS current
DESCRIPTION "CISCO-ATM-CELL-LAYER-MIB Capabilities for
Enhanced AXSM(AXSM-E) Service Module."
SUPPORTS CISCO-ATM-CELL-LAYER-MIB
INCLUDES { caclMIBGroup,
caclATMSwitchStatsMIBGroup,
caclATMEndSyatemStatsMIBGroup,
caclIntervalStatsMIBGroup
}
VARIATION caclInXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInUpcCLP0DiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInUpcTotalDiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInUpcTotalNonCompCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutRcvIdleCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutVpiVciErrCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInUpcCLP0DiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInUpcTotalDiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInUpcTotNonCmpCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutRcvIdleCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutVpiVciErrCells
ACCESS not-implemented
DESCRIPTION "Not supported."
::= { ciscoAtmCellLayerCapability 2 }
cacLayerCapabilityAxsmxgV4R00 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8950 Release 4.0.00"
STATUS current
DESCRIPTION "CISCO-ATM-CELL-LAYER-MIB Capabilities for
10 Gig. AXSM Service Module (AXSM-XG)."
SUPPORTS CISCO-ATM-CELL-LAYER-MIB
INCLUDES { caclMIBGroup,
caclATMStatsMIBGroup,
caclATMSwitchStatsMIBGroup1,
caclIntervalStatsMIBGroup1
}
VARIATION caclInXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInUpcCLP0DiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInUpcTotalDiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInUpcTotalNonCompCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutRcvIdleCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutVpiVciErrCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighInXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighInXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighOutXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighOutXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighOutValidOAMCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInUpcCLP0DiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInUpcTotalDiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInUpcTotNonCmpCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutRcvIdleCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutVpiVciErrCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighIntervalInXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighIntervalInXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighIntervalOutXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighIntervalOutXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighIntervalOutVpiVciErrCells
ACCESS not-implemented
DESCRIPTION "Not supported."
::= { ciscoAtmCellLayerCapability 3 }
END
-- *****************************************************************
-- ciscoAtmCellLayerCapabilities MIB
--
-- AGENT-CAPABILITIES for CISCO-ATM-CELL-LAYER-MIB
--
-- Jan 2003, Prasanna Mucharikar
--
-- Copyright(c) 2003 by Cisco Systems,Inc.
--
-- *****************************************************************
CISCO-ATM-CELL-LAYER-CAPABILITY DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY
FROM SNMPv2-SMI
AGENT-CAPABILITIES
FROM SNMPv2-CONF
ciscoAgentCapability
FROM CISCO-SMI;
ciscoAtmCellLayerCapability MODULE-IDENTITY
LAST-UPDATED "200301300000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"The Agent Capabilities for
CISCO-ATM-CELL-LAYER-MIB.
- cacLayerCapabilityAxsmV2R00 is for
ATM Switch Service Module(AXSM).
- cacLayerCapabilityAxsmeV2R0160 is for
Enhanced AXSM(AXSM-E).
- cacLayerCapabilityAxsmxgV4R00 is for
10 Gig. AXSM(AXSM-XG)."
REVISION "200301300000Z"
DESCRIPTION
"Added cacLayerCapabilityAxsmxgV4R00."
REVISION "200205140000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoAgentCapability 275 }
cacLayerCapabilityAxsmV2R00 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8850 Release 2.0.00"
STATUS current
DESCRIPTION "CISCO-ATM-CELL-LAYER-MIB Capabilities for
AXSM Service Module."
SUPPORTS CISCO-ATM-CELL-LAYER-MIB
INCLUDES { caclMIBGroup,
caclATMSwitchStatsMIBGroup,
caclATMEndSyatemStatsMIBGroup
}
::= { ciscoAtmCellLayerCapability 1 }
cacLayerCapabilityAxsmeV2R0160 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8850 Release 2.1.60"
STATUS current
DESCRIPTION "CISCO-ATM-CELL-LAYER-MIB Capabilities for
Enhanced AXSM(AXSM-E) Service Module."
SUPPORTS CISCO-ATM-CELL-LAYER-MIB
INCLUDES { caclMIBGroup,
caclATMSwitchStatsMIBGroup,
caclATMEndSyatemStatsMIBGroup,
caclIntervalStatsMIBGroup
}
VARIATION caclInXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInUpcCLP0DiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInUpcTotalDiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInUpcTotalNonCompCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutRcvIdleCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutVpiVciErrCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInUpcCLP0DiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInUpcTotalDiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInUpcTotNonCmpCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutRcvIdleCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutVpiVciErrCells
ACCESS not-implemented
DESCRIPTION "Not supported."
::= { ciscoAtmCellLayerCapability 2 }
cacLayerCapabilityAxsmxgV4R00 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8950 Release 4.0.00"
STATUS current
DESCRIPTION "CISCO-ATM-CELL-LAYER-MIB Capabilities for
10 Gig. AXSM Service Module (AXSM-XG)."
SUPPORTS CISCO-ATM-CELL-LAYER-MIB
INCLUDES { caclMIBGroup,
caclATMStatsMIBGroup,
caclATMSwitchStatsMIBGroup1,
caclIntervalStatsMIBGroup1
}
VARIATION caclInXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInUpcCLP0DiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInUpcTotalDiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclInUpcTotalNonCompCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutRcvIdleCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclOutVpiVciErrCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighInXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighInXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighOutXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighOutXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighOutValidOAMCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInUpcCLP0DiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInUpcTotalDiscCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalInUpcTotNonCmpCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutRcvIdleCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclIntervalOutVpiVciErrCells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighIntervalInXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighIntervalInXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighIntervalOutXmtCLP0Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighIntervalOutXmtCLP1Cells
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caclHighIntervalOutVpiVciErrCells
ACCESS not-implemented
DESCRIPTION "Not supported."
::= { ciscoAtmCellLayerCapability 3 }
END

1776
snmp_mib_archive/CISCO-ATM-CELL-LAYER-MIB.my 2
View File

File diff suppressed because it is too large Load Diff

679
snmp_mib_archive/CISCO-ATM-CONN-INFO-MIB.my 2
View File

@ -1,679 +0,0 @@
-- *****************************************************************
-- CISCO-ATM-CONN-INFO-MIB
--
-- April 2003, Rashmi Purandare
--
-- Copyright (c) 2003 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-ATM-CONN-INFO-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Gauge32,
Unsigned32 FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
ifIndex FROM IF-MIB
ciscoMgmt FROM CISCO-SMI
TEXTUAL-CONVENTION FROM SNMPv2-TC;
ciscoAtmConnInfoMIB MODULE-IDENTITY
LAST-UPDATED "200306160000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"The MIB module for providing the parameters
configured on an ATM interface.
Terminologies used:
SVC : Switched Virtual Channel
SPVC : Soft Permanent Virtual Circuit
SPVP : Soft Permanent Virtual Path
SVPC : Switched Virtual Path Connection
DAX : Connection with endpoints on the same
ATM switch
P2p : Point-to-point connection
P2mp : Point-to-multi-point connection
Root : The root of point-to-multipoint connection,
which is associated with a VPI/VCI
Leaf : Usually one point-to-multipoint connection
consists of one root and one or more leaves.
Leaf is the branch point for point
to multipoint connection that is
associated with a VPI/VCI
Party: One or more party is associated with each
leaf, all parties are associated with
the same VPI/VCI that its leaf belongs to
Source Via Node Destination
------- ------- -------
A| |B C| |D E| |F
--+-----+----------+-----+------------+-----+--
| | | | | |
------- ------- -------
Each active connection has two terminating
endpoints.
In the above diagram, Endpoints A and F are
terminating.
Of these the master endpoint of the connection
initiates the routing of the call and is
considered the calling party. The slave endpoint
is the called party which receives calls and is
the destination of a call.
Any endpoints that are created either on Via nodes
or on the node with the terminating endpoint in
order to have a complete connections between
endpoints A and F are said to be intermediate
endpoints. In the above diagram, endpoints B, C,
D and E are intermediate endpoints.
"
REVISION "200306160000Z"
DESCRIPTION
"Initial version of the MIB."
::= { ciscoMgmt 9999 }
caciMIBNotifications OBJECT IDENTIFIER ::= { ciscoAtmConnInfoMIB 0 }
caciMIBObjects OBJECT IDENTIFIER ::= { ciscoAtmConnInfoMIB 1 }
-- conn statistics
caciAtmConnInfo OBJECT IDENTIFIER ::= { caciMIBObjects 1 }
caciIfInfo OBJECT IDENTIFIER ::= { caciAtmConnInfo 1 }
caciP2pConns OBJECT IDENTIFIER ::= { caciAtmConnInfo 2 }
caciP2pEndpoints OBJECT IDENTIFIER ::= { caciAtmConnInfo 3 }
caciP2pIntEndpoints OBJECT IDENTIFIER ::= { caciAtmConnInfo 4 }
caciP2mpConns OBJECT IDENTIFIER ::= { caciAtmConnInfo 5 }
caciGeneric OBJECT IDENTIFIER ::= { caciAtmConnInfo 6 }
-- Textual conventions
CaciGeneralConnEPCategory::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"General category for connection or endpoint types
supported on the switch.
caciP2p : Point to point connection
caciP2mpR : Point to multi point root connection
caciP2mpL : Point to multi point leaf connection
caciP2mpPty: Point to multi point party connection"
SYNTAX INTEGER {
caciP2p(1),
caciP2mpR(2),
caciP2mpL(3),
caciP2mpPty(4)
}
CaciP2pConnCategory::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The connection category.
caciP2pSvcc : Point to point Svc connection
caciP2pSvpc : Point to point Svpc connection
caciP2pSpvcD: Point to point Spvc DAX connection
caciP2pSpvpD: Point to point Spvp DAX connection
caciP2pSpvcR: Point to point SPVC Routed connection
caciP2pSpvpR: Point to point Spvp Routed connection"
SYNTAX INTEGER {
caciP2pSvcc(1),
caciP2pSvpc(2),
caciP2pSpvcD(3),
caciP2pSpvpD(4),
caciP2pSpvcR(5),
caciP2pSpvpR(6)
}
CaciP2pEndpointCategory::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The terminating endpoint category.
caciP2pSpvcRPEP : Point to point Spvc
Routed Persistent endpoint
caciP2pSpvcRNPEP: Point to point Spvc
Routed Non-persistent endpoint
caciP2pSpvpRPEP : Point to point Spvp
Routed Persistent endpoint
caciP2pSpvpRNPEP: Point to point Spvp
Routed Non-persistent endpoint
caciP2pSpvcDEP : Point to point Spvc
DAX endpoint
caciP2pSpvpDEP : Point to point Spvp
DAX endpoint"
SYNTAX INTEGER {
caciP2pSpvcRPEP(1),
caciP2pSpvcRNPEP(2),
caciP2pSpvpRPEP(3),
caciP2pSpvpRNPEP(4),
caciP2pSpvcDEP(5),
caciP2pSpvpDEP(6)
}
CaciP2pIntEndpointCategory::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The intermediate endpoint category.
caciP2pSvccIntEP : Point to point Svc
intermediate endpoint
caciP2pSvpcIntEP : Point to point Svpc
intermediate endpoint
caciP2pSpvcRIntEP: Point to point Spvc Routed
intermediate endpoint
caciP2pSpvpRIntEP: Point to point Spvp Routed
intermediate endpoint"
SYNTAX INTEGER {
caciP2pSvccIntEP(1),
caciP2pSvpcIntEP(2),
caciP2pSpvcRIntEP(3),
caciP2pSpvpRIntEP(4)
}
CaciP2mpConnCategory::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The point to multipoint connection category.
caciP2mpSvcRoot : Point to multipoint Svc
root connection
caciP2mpSvcLeaf : Point to multipoint Svc
leaf connection
caciP2mpSvcParty : Point to multipoint Svc
party connection
caciP2mpSvpcRoot : Point to multipoint Svpc
root connection
caciP2mpSvpcLeaf : Point to multipoint Svpc
leaf connection
caciP2mpSvpcParty: Point to multipoint Svpc
party connection
caciP2mpSpvcP : Point to multipoint Spvc
persistent connection
caciP2mpSpvcNP : Point to multipoint Spvc
non-persistent connection
caciP2mpSpvcAct : Point to multipoint Spvc
Active connection
caciP2mpSpvpP : Point to multipoint Spvp
persistent connection
caciP2mpSpvpNP : Point to multipoint Spvp
non-persistent connection
caciP2mpSpvpAct : Point to multipoint Spvp
active connection
caciP2mpSpvcPaP : Point to multipoint Spvc
party persistent connection
caciP2mpSpvcPaAct: Point to multipoint Spvc
party active connection
caciP2mpSpvpPaP : Point to multipoint Spvp
party persistent connection
caciP2mpSpvpPaAct: Point to multipoint Spvp
party active connection"
SYNTAX INTEGER {
caciP2mpSvcRoot(1),
caciP2mpSvcLeaf(2),
caciP2mpSvcParty(3),
caciP2mpSvpcRoot(4),
caciP2mpSvpcLeaf(5),
caciP2mpSvpcParty(6),
caciP2mpSpvcP(7),
caciP2mpSpvcNP(8),
caciP2mpSpvcAct(9),
caciP2mpSpvpP(10),
caciP2mpSpvpNP(11),
caciP2mpSpvpAct(12),
caciP2mpSpvcPaP(13),
caciP2mpSpvcPaAct(14),
caciP2mpSpvpPaP(15),
caciP2mpSpvpPaAct(16)
}
CaciATMEndpointCategory::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The connection category.
caciTotalSpvc : Total SPVC endpoints configured
on the ATM switch
caciP2pTotalInt : Total intermediate endpoints
configured on the ATM switch
caciTotalMaster : Total master endpoints configured
on the ATM switch
caciTotalSlave : Total slave endpoints configured
on the ATM switch"
SYNTAX INTEGER {
caciTotalSpvc(1),
caciP2pTotalInt(2),
caciTotalMaster(3),
caciTotalSlave(4)
}
-- Node related scalars
-- Total connections
caciP2pTotalConfConns OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total point to point
connections that are configured on this ATM switch."
::= { caciGeneric 1 }
caciP2pMaxPossibleConns OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the upper limit of the
point to point and point to multipoint
connections that are allowed to be configured
on this ATM switch."
::= { caciGeneric 2 }
--Total endpoints
caciMaxPossibleEndpoints OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the upper limit of all the
possible endpoints that are allowed to be
configured on this ATM switch."
::= { caciGeneric 3 }
-- Summary of switch endpoints
caciGenericEndpointTable OBJECT-TYPE
SYNTAX SEQUENCE OF CaciGenericEndpointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains number of connection per
CaciATMEndpointCategory."
::= { caciGeneric 4 }
caciGenericEndpointEntry OBJECT-TYPE
SYNTAX CaciGenericEndpointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table specifying the number
of connections for the corresponding
CaciATMEndpointCategory."
INDEX { caciATMEndpointCategory }
::= { caciGenericEndpointTable 1 }
CaciGenericEndpointEntry ::=
SEQUENCE {
caciATMEndpointCategory CaciATMEndpointCategory,
caciTotalEndpoints Gauge32
}
caciATMEndpointCategory OBJECT-TYPE
SYNTAX CaciATMEndpointCategory
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Endpoint category corresponding to
CaciATMEndpointCategory."
::= { caciGenericEndpointEntry 1 }
caciTotalEndpoints OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of endpoints of
caciATMEndpointCategory configured
on this ATM switch."
::= { caciGenericEndpointEntry 2 }
-- Interface Connections Statistics table
caciConnInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CaciConnInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Connection Statistics table.
This table has the number of connections per interface."
::= { caciIfInfo 1 }
caciConnInfoEntry OBJECT-TYPE
SYNTAX CaciConnInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the caciConnInfoTable.
Each entry in ifTable with ifType
values: atm(37), atmLogical(80) or atmVirtual(149)
has an associated entry in this table."
INDEX { ifIndex, caciGeneralConnEPCategory }
::= { caciConnInfoTable 1 }
CaciConnInfoEntry ::=
SEQUENCE {
caciGeneralConnEPCategory CaciGeneralConnEPCategory,
caciNumUsedConns Gauge32
}
caciGeneralConnEPCategory OBJECT-TYPE
SYNTAX CaciGeneralConnEPCategory
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The general connection or endpoint category
on this ATM switch."
::= { caciConnInfoEntry 1 }
caciNumUsedConns OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total number of used
connections of type caciGeneralConnEPCategory
on this interface."
::= { caciConnInfoEntry 2 }
-- Summary of total P2p connections
caciP2pConnTable OBJECT-TYPE
SYNTAX SEQUENCE OF CaciP2pConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains number of connection per
CaciP2pConnCategory."
::= { caciP2pConns 1}
caciP2pConnEntry OBJECT-TYPE
SYNTAX CaciP2pConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table specifying the number
of connections for the corresponding CaciP2pConnCategory."
INDEX { caciP2pConnectionCategory }
::= { caciP2pConnTable 1 }
CaciP2pConnEntry ::=
SEQUENCE {
caciP2pConnectionCategory CaciP2pConnCategory,
caciP2pTotalConns Gauge32
}
caciP2pConnectionCategory OBJECT-TYPE
SYNTAX CaciP2pConnCategory
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The connection category."
::= { caciP2pConnEntry 1 }
caciP2pTotalConns OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of P2p connections of type
CaciP2pConnCategory configured on this ATM switch."
::= { caciP2pConnEntry 2 }
-- Summary of total P2p Endpoints
caciP2pEndpointTable OBJECT-TYPE
SYNTAX SEQUENCE OF CaciP2pEndpointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains number of endpoints per
CaciP2pEndpointCategory."
::= { caciP2pEndpoints 1}
caciP2pEndpointEntry OBJECT-TYPE
SYNTAX CaciP2pEndpointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table specifying the number
of endpoints for the corresponding
CaciP2pEndpointCategory."
INDEX { caciP2pEndptCategory }
::= { caciP2pEndpointTable 1 }
CaciP2pEndpointEntry ::=
SEQUENCE {
caciP2pEndptCategory CaciP2pEndpointCategory,
caciP2pTotalConfEndpoints Gauge32
}
caciP2pEndptCategory OBJECT-TYPE
SYNTAX CaciP2pEndpointCategory
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The point to point endpoint category."
::= { caciP2pEndpointEntry 1 }
caciP2pTotalConfEndpoints OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of total P2p enpoints of type
CaciP2pEndpointCategory configured on this ATM switch."
::= { caciP2pEndpointEntry 2 }
-- Summary of Total Active SVC/SPVC P2p intermediate endpoints
caciP2pIntEndpointTable OBJECT-TYPE
SYNTAX SEQUENCE OF CaciP2pIntEndpointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains number of endpoints per
CaciP2pIntEndpointCategory."
::= { caciP2pIntEndpoints 1}
caciP2pIntEndpointEntry OBJECT-TYPE
SYNTAX CaciP2pIntEndpointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table specifying the number
of endpoints for the corresponding
CaciP2pIntEndpointCategory."
INDEX { caciP2pIntEndptCategory }
::= { caciP2pIntEndpointTable 1 }
CaciP2pIntEndpointEntry ::=
SEQUENCE {
caciP2pIntEndptCategory CaciP2pIntEndpointCategory,
caciP2pTotalIntEndpoints Gauge32
}
caciP2pIntEndptCategory OBJECT-TYPE
SYNTAX CaciP2pIntEndpointCategory
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The point to point intermediate endpoint category."
::= { caciP2pIntEndpointEntry 1 }
caciP2pTotalIntEndpoints OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of P2p intermediate enpoints of type
CaciP2pIntEndpointCategory present on this ATM switch."
::= { caciP2pIntEndpointEntry 2 }
-- Summary of point to multipoint connections
caciP2mpConnTable OBJECT-TYPE
SYNTAX SEQUENCE OF CaciP2mpConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains number of connection per
CaciP2mpConnCategory."
::= { caciP2mpConns 1 }
caciP2mpConnEntry OBJECT-TYPE
SYNTAX CaciP2mpConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table specifying the number
of connections for the corresponding
CaciP2mpConnCategory."
INDEX { caciP2mpConnectionCategory }
::= { caciP2mpConnTable 1 }
CaciP2mpConnEntry ::=
SEQUENCE {
caciP2mpConnectionCategory CaciP2mpConnCategory,
caciP2mpTotalConfConns Gauge32
}
caciP2mpConnectionCategory OBJECT-TYPE
SYNTAX CaciP2mpConnCategory
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The point to multi point connection category."
::= { caciP2mpConnEntry 1 }
caciP2mpTotalConfConns OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of P2mp connections of type
CaciP2mpConnCategory configured on this ATM switch."
::= { caciP2mpConnEntry 2 }
-- Notifications
-- There are no notifications for this module
-- conformance information
ciscoAtmConnInfoMIBConformance OBJECT IDENTIFIER ::=
{ ciscoAtmConnInfoMIB 2 }
ciscoAtmConnInfoMIBCompliances OBJECT IDENTIFIER ::=
{ ciscoAtmConnInfoMIBConformance 1 }
ciscoAtmConnInfoMIBGroups OBJECT IDENTIFIER ::=
{ ciscoAtmConnInfoMIBConformance 2 }
ciscoAtmConnInfoMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The Compliance statement for ciscoAtm management group."
MODULE -- this module
MANDATORY-GROUPS { ciscoConnInfoConfMIBGroup,
ciscoTotalConnsMIBGroup,
ciscoTotalEndpointsMIBGroup
}
GROUP ciscoP2pConnsMIBGroup
DESCRIPTION
"Required if P2p connections are supported"
GROUP ciscoP2pEndpointsMIBGroup
DESCRIPTION
"Required if P2p connections are supported"
GROUP ciscoP2pIntEndpointsMIBGroup
DESCRIPTION
"Required if P2p connections are supported"
GROUP ciscoP2mpConnsMIBGroup
DESCRIPTION
"Required if P2mp connections are supported"
::= { ciscoAtmConnInfoMIBCompliances 1 }
-- units of conformance
ciscoConnInfoConfMIBGroup OBJECT-GROUP
OBJECTS {
caciNumUsedConns
}
STATUS current
DESCRIPTION
"Objects used for representing connection
statistical details about an interface."
::= { ciscoAtmConnInfoMIBGroups 1 }
ciscoP2pConnsMIBGroup OBJECT-GROUP
OBJECTS {
caciP2pTotalConns
}
STATUS current
DESCRIPTION
"Objects used for representing the point to point
connections of a particular CaP2pConnCategory."
::= { ciscoAtmConnInfoMIBGroups 2 }
ciscoP2pEndpointsMIBGroup OBJECT-GROUP
OBJECTS {
caciP2pTotalConfEndpoints
}
STATUS current
DESCRIPTION
"Objects used for representing the point to point
endpoints of a particular CaP2pEndpointCategory."
::= { ciscoAtmConnInfoMIBGroups 3 }
ciscoP2pIntEndpointsMIBGroup OBJECT-GROUP
OBJECTS {
caciP2pTotalIntEndpoints
}
STATUS current
DESCRIPTION
"Objects used for representing the point to point
intermediate endpoints of a particular
CaP2pIntEndpointCategory."
::= { ciscoAtmConnInfoMIBGroups 4 }
ciscoP2mpConnsMIBGroup OBJECT-GROUP
OBJECTS {
caciP2mpTotalConfConns
}
STATUS current
DESCRIPTION
"Objects used for representing the point to multi point
connections of a particular CaP2mpConnCategory."
::= { ciscoAtmConnInfoMIBGroups 5 }
ciscoTotalConnsMIBGroup OBJECT-GROUP
OBJECTS {
caciP2pTotalConfConns,
caciP2pMaxPossibleConns
}
STATUS current
DESCRIPTION
"Objects used for representing the total connections
on the ATM switch."
::= { ciscoAtmConnInfoMIBGroups 6 }
ciscoTotalEndpointsMIBGroup OBJECT-GROUP
OBJECTS {
caciMaxPossibleEndpoints,
caciTotalEndpoints
}
STATUS current
DESCRIPTION
"Objects used for representing the total endpoints
on the ATM switch."
::= { ciscoAtmConnInfoMIBGroups 7 }
END

Some files were not shown because too many files have changed in this diff Show More